betaFeedback

WorksPhysics and Astronomy

Revealing galaxy assembly bias with luminosity-weighted marked correlations

Abstract

We investigate whether luminosity-weighted marked correlation functions can reveal secondary halo information beyond that encoded by halo mass alone, as expected in scenarios of galaxy assembly bias. We propose a controlled null test in which galaxy luminosities follow the same mean luminosity–halo mass relation and scatter, while their residuals are either (A) uncorrelated with secondary halo properties or (B) correlated with a standardized secondary halo property, ss. Both models have identical halo occupation, galaxy positions, luminosity function, and unweighted projected two-point correlation function, wp(rp)w_p(r_p), so their distinction is encoded entirely in the luminosity marks. At leading order, the projected marked correlation function difference, ΔMp(rp)Δ\mathcal{M}_p(r_p), scales as ρ2σlog⁡L2ξss(rp)ρ^2σ_{\log L}^2ξ_{ss}(r_p), where ρρ controls the coupling between the luminosity and secondary-property residuals, σlog⁡Lσ_{\log L} is the scatter in log luminosity at fixed halo mass, and ξssξ_{ss} describes the spatial correlation of the secondary property. We test this framework using a DESI-BGS mock catalogue over 0.1<z<0.40.1<z<0.4. For the injected dependence, we detect a marked-clustering deviation over 0.11<rp/(h−1 Mpc)<1.040.11<r_p/(h^{-1}\,{\rm Mpc})<1.04, obtaining χ2=30.14χ^2=30.14 relative to the null covariance. A one-parameter test rejects the mass-only hypothesis at greater than 5σ5σ significance (p=2.13×10−7p=2.13\times10^{-7}) for ∣ρ∣>0.63|ρ|>0.63. At fixed σlog⁡L=0.23σ_{\log L}=0.23, correlations as weak as ∣ρ∣≃0.52|ρ|\simeq0.52 remain detectable, with the results stable under variations in the HOD prescription and modelled galaxy selection effects. These results establish luminosity-weighted marked clustering as a sensitive null test for property-based galaxy assembly bias and secondary halo information hidden from unweighted two-point clustering.

Introduction

In the standard cosmological model, Λ\LambdaCDM, the large-scale structure of the Universe originates from small primordial matter-density fluctuations that grow through gravitational instability [1, 2]. As structure evolves hierarchically, matter collapses into dark matter haloes, which provide the underlying framework within which galaxies form and evolve [3, 4]. The properties and spatial distribution of galaxies are expected to be closely connected to those of their host haloes, a relation commonly referred to as the galaxy–halo connection [for a comprehensive review, see [5]]. Empirical descriptions of this connection, including halo occupation distribution (HOD) and conditional luminosity function (CLF) models, have been remarkably successful under the standard assumption that halo mass is the primary variable controlling the galaxy population [6, 7]. In this picture, galaxy abundance and spatial clustering are determined by how galaxies populate haloes of different masses, while on large scales galaxy clustering can be related to the underlying matter distribution through galaxy bias [8]. Because halo bias depends strongly on halo mass, the distribution of host halo masses provides a natural connection between galaxy abundance and galaxy clustering [9, 10, 11].

A central open question is whether halo mass provides a complete description of the galaxy–halo connection [5, 12], and what summary statistics can be used to reveal any secondary dependencies. Dark matter haloes of the same mass can exhibit different formation times, concentrations, angular momenta, accretion histories, and environmental information [13, 14, 15]. Several of these secondary properties are themselves correlated with halo clustering at fixed mass, an effect commonly referred to as halo assembly bias or secondary halo bias [13, 16]. At fixed halo mass, if either the properties of galaxies or the number of galaxies hosted by a halo depend on secondary halo properties, this dependence can propagate to the galaxy population and is referred to as galaxy assembly bias [5, 17]. The dependence of halo occupation on secondary halo properties at fixed mass is commonly called occupancy variation; coupled with halo assembly bias, it can generate an occupation-based galaxy assembly-bias signal [18, 19, 20]. Another important question is whether residuals in galaxy properties at fixed halo mass retain information about secondary halo properties beyond a main relation, and whether these correlations leave an observable imprint on galaxy clustering [5, 21, 22]. Hydrodynamical simulations support this property-based behaviour, showing that halo formation and mass-accretion histories can be reflected in observable galaxy properties and in secondary differences in galaxy clustering at fixed halo mass [23, 24]. Such information may be encoded not only in the occupation of haloes by galaxies, but also in observable galaxy properties—including luminosity, colour, and star-formation activity—at fixed halo mass [5, 22].

Observational constraints on galaxy assembly bias remain mixed and depend on the galaxy sample, the secondary halo dependence being tested, and the observables and modelling assumptions employed. Combining counts-in-cylinders with projected clustering, analyses of luminosity-threshold samples from SDSS DR7 and the DESI BGS One-Percent Survey have found evidence for central occupation assembly bias, particularly for some lower-luminosity samples [25, 26]. A model-based analysis of DESI emission-line galaxy clustering has also inferred a non-zero assembly-bias signal and examined its connection to galaxy conformity [27]. Conversely, an analysis of SDSS galaxies found no statistically significant central or satellite occupation assembly bias in its fiducial constraints [28], while a direct measurement using DESI DR1 BGS galaxies found satellite occupation assembly bias consistent with zero [29]. These differing results motivate complementary probes of secondary halo dependence, including tests based on observable galaxy properties rather than on galaxy occupation alone.

Marked correlation functions provide a natural way to test for secondary dependencies in the galaxy–halo connection. Rather than weighting all galaxy pairs equally, a marked statistic assigns each galaxy a mark associated with a chosen property and weights each pair by the product of its marks, thereby measuring how that property correlates with pair separation and environment [30, 31, 32]. For example, by using halo formation time, Sheth and Tormen [31] applied marked correlation functions to probe the environmental dependence of halo formation, providing an early application of marked statistics to secondary halo information. Suitably chosen marks can distinguish models that are degenerate in conventional unweighted two-point clustering; for example, White and Padmanabhan [33] used a local-density mark to break a degeneracy between the HOD and cosmology. More generally, nonlinear density marks can make two-point-like statistics sensitive to information contained in higher-order correlations [34]. For luminosity marks, Skibba et al. [35] showed that a non-zero marked signal is expected even in a standard mass-only galaxy–halo model. This signal arises because the mean luminosity of galaxies depends on halo mass, while massive haloes preferentially populate denser environments [31, 32, 35]. Consequently, luminosity and environment can be correlated even in the absence of any secondary halo dependence at fixed mass. Luminosity-weighted marked correlations can provide information complementary to the ordinary two-point correlation function and offer a continuous measure of the relation between galaxy properties and environment without requiring the galaxy population to be divided into discrete environmental classes [31].

In this work, we build on the mass-only interpretation of luminosity-weighted marked clustering and ask whether it can reveal secondary halo information beyond that encoded by halo mass alone. Throughout this work, we use the term galaxy assembly bias specifically to describe a dependence of observable galaxy properties on secondary halo properties at fixed halo mass [5]. We construct a controlled null test in which the mean luminosity–halo mass relation and its scatter define the mass-only prediction, and test whether correlating luminosity scatter with a spatially correlated secondary halo property generates an additional marked-clustering contribution. The halo occupation and galaxy positions are held fixed, so the unweighted two-point clustering remains unchanged, while galaxy luminosities can retain information about the secondary halo property. Then, our test targets a property-based manifestation of galaxy assembly bias rather than an occupation-based one. The resulting difference in the luminosity-weighted marked correlation function provides a controlled test of secondary halo information that is invisible to standard unweighted two-point clustering.

We organize this paper as follows: In Section §II we explain the methodology of the Luminosity-weighted marked correlation function. We define the property-based galaxy assembly bias and design the null test in Section §III. The simulations and generation of the mock catalogue to perform the test are explained in Section § 2. We show the result of the application of the model and test for the mocks in Section § 2.1. We add the conclusions of this work in Section §VI.

Luminosity-weighted marked correlations

The luminosity-weighted marked correlation functions provide a way of measuring how galaxy luminosity is distributed over the galaxy density field without splitting the sample into separate luminosity bins. Following the halo-model interpretation of [36] and [35], the marked statistic can be written as the ratio between a luminosity-weighted correlation function and the ordinary two-point correlation function, schematically:

M(r)=1+W(r)1+ξ(r).(1)\mathcal{M}(r) = \frac{1 + W(r)}{1 + \xi(r)}. \tag*{(1)}

Here, W(r)W(r) is obtained from the same galaxy pair counts that define ξ(r)\xi(r), but with each galaxy weighted by its luminosity mark. Considering the halo model, both ξ\xi and WW can be decomposed into one-halo and two-halo terms; the difference is that the weighted statistic replaces the ordinary halo occupation moments by luminosity-weighted occupation moments. Therefore, even in a model with no explicit environmental dependence at fixed halo mass, a luminosity-marked signal is expected whenever the mean luminosity of galaxies depends on halo mass, because massive haloes preferentially populate dense environments [31, 32]. This provides a standard mass-only prediction for luminosity-marked clustering [35], against which we test additional secondary-property dependence by introducing a coupling between the luminosity scattering and a secondary halo property.

In the standard halo occupation picture, galaxy luminosity is primarily determined by the mass of its host. halo. We describe the luminosity distribution at fixed halo mass using a conditional luminosity function (CLF), Φ(L∣M)\Phi(L|M) [7]. The mean number of galaxies hosted by a halo of mass MM above a luminosity threshold is

⟨N(M)⟩=∫Lmin⁡∞Φ(L∣M) dL.(2)\langle N(M)\rangle= \int_{L_{\min}}^{\infty} \Phi(L|M)\,\mathrm{d}L. \tag*{(2)}

The CLF specifies the distribution of galaxy luminosities at fixed host-halo mass determining the mean occupation above a luminosity threshold. To describe the luminosity of an individual galaxy, we write

log⁡Li=log⁡L‾(Mi)+σlog⁡Lϵi,(3)\log L_i = \log\overline{L}(M_i) + \sigma_{\log L}\epsilon_i, \tag*{(3)}

where log⁡L‾(Mi)≡⟨log⁡Li∣Mi⟩\log\overline{L}(M_i) \equiv\langle\log L_i \mid M_i\rangle is the mean log-luminosity–halo mass relation, σlog⁡L\sigma_{\log L} is the standard deviation of log⁡L\log L at fixed halo mass, expressed as a natural logarithm, and ϵi∼N(0,1)\epsilon_i \sim\mathcal{N}(0,1) is a standard-normal distribution.

We define the normalized luminosity mark

mi=Li⟨L⟩,(4)m_i = \frac{L_i}{\langle L\rangle}, \tag*{(4)}

where ⟨L⟩\langle L\rangle is the mean luminosity of the galaxy sample under consideration. By construction, ⟨m⟩=1\langle m\rangle= 1. In general, ⟨L⟩\langle L\rangle differs from L‾(M)\overline{L}(M): it is the sample-averaged luminosity across the host-halo mass distribution.

At fixed halo mass, we can decompose the mark into its conditional mean and residual,

mi=⟨mi∣Mi⟩+δmi,(5)m_i = \langle m_i \mid M_i\rangle+ \delta m_i, \tag*{(5)}

where

⟨δmi∣Mi⟩=0.(6)\langle\delta m_i \mid M_i\rangle= 0. \tag*{(6)}

The marked correlation function is the mean product of the marks for galaxy pairs separated by rr,

M(r)≡⟨mimj⟩r.(7)\mathcal{M}(r) \equiv\langle m_i m_j\rangle_r. \tag*{(7)}

Using the decomposition above, the marked correlation function can be written as

M(r)=⟨⟨m∣Mi⟩⟨m∣Mj⟩⟩r+⟨⟨m∣Mi⟩δmj⟩r+⟨⟨m∣Mj⟩δmi⟩r+⟨δmiδmj⟩r.(8)\begin{aligned} \mathcal{M}(r) ={}& \langle\langle m\mid M_i\rangle\langle m\mid M_j\rangle\rangle_r \\ &+ \langle\langle m\mid M_i\rangle\delta m_j\rangle_r + \langle\langle m\mid M_j\rangle\delta m_i\rangle_r \\ &+ \langle\delta m_i\delta m_j\rangle_r . \tag*{(8)} \end{aligned}

We define the null hypothesis of this work as the case in which, once halo mass is specified, galaxy luminosity is described by the mean luminosity–mass relation plus stochastic scatter. Under this hypothesis, the scatter contains no additional spatially correlated information: luminosity residuals are independent of pair separation and the properties of the neighbour galaxies inside a halo. The conditional-mean decomposition in Eq. (8) then has vanishing cross terms, while the residual-correlation term ⟨δmiδmj⟩\langle\delta m_i\delta m_j\rangle also vanishes for distinct galaxy pairs. The marked correlation is therefore determined by the mass-dependent mark completely. To test for information beyond halo mass without changing the mean luminosity–mass relation or its scatter, we construct an alternative model in which the luminosity residuals are correlated with a secondary halo property at fixed mass. If this property is spatially correlated (see Figure 1), the luminosity residuals inherit that correlation and contribute to the marked-clustering signal. As illustrated in Figure 1, the two models have almost identical halo occupation and galaxy positions, and subsequently the same unweighted two-point clustering, but differ in the spatial assignment of their luminosity marks.

Schematic illustration of the two luminosity-assignment models used in the null test

Figure 1. Schematic illustration of the two luminosity-assignment models used in the null test. Left: In Model A, galaxy luminosities follow a halo-mass-only relation, and luminosity residuals (galaxy luminosity − mean luminosity) are assigned independently once halo mass is specified, colouring high (red) and low (light-blue) luminosity galaxies. Right: In Model B, the same luminosities are reassigned so that their residuals correlate with a secondary halo property. For visual clarity, this correlation is represented by placing the most luminous galaxies preferentially closer to the halo centre; the radial ordering is illustrative and can represent any property, such as concentration, formation history, or environment. The halo occupation and galaxy positions are identical in the two models, so their unweighted projected two-point correlation functions are the same. Their luminosity-weighted marked correlation functions can nevertheless differ because the luminosity marks contain different spatially correlated information.

Mass-only luminosity model

We define a baseline model, denoted Model A, in which the luminosity residual is independent of any secondary halo property,

ϵiA=ηi,ηi∼N(0,1).(9)\epsilon_i^{\mathrm{A}}=\eta_i,\qquad\eta_i\sim\mathcal{N}(0,1). \tag*{(9)}

For two distinct galaxies,

⟨ηiηj⟩=0,i≠j,(10)\langle\eta_i\eta_j\rangle=0,\qquad i\ne j, \tag*{(10)}

the luminosity scatter produces stochastic variation in the marks characterised only by σlog⁡L\sigma_{\log L}, but introduces no additional spatially correlated luminosity information. The systematic dependence of the luminosity-weighted clustering is then determined entirely by halo mass. Model A provides the mass-only reference against which the alternative model is compared.

Dependence on a secondary halo property

We next consider the possibility that galaxy luminosity contains information about a secondary halo property at fixed halo mass [37, 38], as sketched in Figure 1, showing a luminosity dependent clustering. For a generic halo property qq, we define a standardized residual

si=qi−⟨q∣Mi⟩σq.(11)s_i=\frac{q_i-\langle q\mid M_i\rangle}{\sigma_q}. \tag*{(11)}

By construction,

⟨s∣M⟩≃0,Var⁡(s∣M)≃1.(12)\langle s\mid M\rangle\simeq0,\qquad\operatorname{Var}(s\mid M)\simeq1. \tag*{(12)}

For halo concentration, for example, we take q=log⁡cq=\log c, such that

si=log⁡ci−⟨log⁡c∣Mi⟩σlog⁡c(Mi).(13)s_i=\frac{\log c_i-\langle\log c\mid M_i\rangle}{\sigma_{\log c}(M_i)}. \tag*{(13)}

As shown in Figure 2, this procedure removes both the mean concentration–mass relation and the mass dependence of its scatter. The secondary dependence introduced below does not arise from the ordinary correlation between halo mass and concentration. Coupling luminosity directly to concentration could modify the mean luminosity–mass relation and, consequently, the resulting luminosity function [37]. Instead, our construction correlates luminosity residuals with concentration residuals at fixed halo mass, thereby preserving the mean luminosity–mass relation. We adopt concentration as an illustrative secondary property because it can be robustly standardized at fixed mass [39], and exhibits spatially correlated variations associated with secondary halo bias. Nevertheless, this definition is not specific to concentration, but to any standard secondary halo property.

Figure 2. Example of the standardised mass dependent property displayed by the concentration–mass relation. Top: We bin log-concentration, log⁡c\log c, from the abacus simulation inferred by using the rvmaxr_{\mathrm{vmax}} as a proxy, for several bins in the log halo mass M200mM_{200m} (blue hexagons), with a gradient colour indicating the Number of haloes (colour bar). In this example, we show 11 bins, between 11.8<log⁡M/(h−1 M⊙)<14.011.8 < \log M/(h^{-1}\,M_\odot) < 14.0, which represents the halos where the relation can be standardised by calculating the mean ⟨log⁡c⟩\langle\log c\rangle and variance σlog⁡c2\sigma_{\log c}^{2} (white line with error bars). We display only the mass bins of haloes with Np≳100N_{\mathrm{p}}\gtrsim100, where concentration is numerically well defined for a halo. Bottom: Probability density function ss (red histogram) defined by log⁡c\log c for the mass bins showed in the top panel. This shows that ss for a fix halo mass, can be expressed as a unit Gaussian distribution (dashed line). We add Poisson error (light-blue error bars) bars to show the scatter of the stacked 500 simulations we arbitrarily select from the AbacusSummit small suite.

In Model B, the luminosity residual is correlated with the secondary halo property according to

ϵiB=ρsi+1−ρ2 ηi,(14)\epsilon_i^{\mathrm{B}} = \rho s_i + \sqrt{1-\rho^2}\,\eta_i, \tag*{(14)}

where ρ\rho is the correlation coefficient, which controls the strength of the luminosity–secondary-property residuals coupling. The same realization of ηi\eta_i is used in Models A and B, so that their difference is driven only by the additional dependence on ss.

If ss is standardized, the variance of ϵB\epsilon^{\mathrm{B}} is approximately preserved,

⟨(ϵB)2⟩≃ρ2+1−ρ2=1.(15)\left\langle\left(\epsilon^{\mathrm{B}}\right)^2 \right\rangle\simeq\rho^2 + 1-\rho^2 = 1. \tag*{(15)}

Models A and B can be constructed with the same halo catalogue, galaxy occupation, galaxy positions, mean luminosity–mass relation, and luminosity-scatter amplitude. Their intended difference is only the correlation between luminosity scatter and the standardised residuals.

For two distinct galaxies, the independent random contributions from η\eta vanish in the ensemble average, while the component proportional to the secondary property remains correlated. Therefore, we obtain

⟨ϵiBϵjB⟩r=ρ2⟨sisj⟩r.(16)\left\langle\epsilon_i^{\mathrm{B}}\epsilon_j^{\mathrm{B}} \right\rangle_r = \rho^2 \left\langle s_i s_j \right\rangle_r. \tag*{(16)}

We define

ξss(r)≡⟨sisj⟩r,(17)\xi_{ss}(r) \equiv\left\langle s_i s_j \right\rangle_r, \tag*{(17)}

which corresponds to the marked correlation function of the standardized secondary halo property at separation rr. This quantity describes the scale-dependent spatial correlation of the secondary-property residuals after their mean dependence on halo mass has been removed.

The importance of Eq. (16) becomes clear when considering the decomposition of the luminosity mark in Eq. (8). The mass-dependent contribution, ⟨m∣M⟩\langle m|M\rangle, is the same by construction in Models A and B, since both models share the same mean luminosity–mass relation. The additional dependence introduced in Model B is entirely contained in the residual component δm\delta m. Consequently, when comparing the marked correlations of the two models, the term of interest is the residual correlation ⟨δmiδmj⟩r\langle\delta m_i\delta m_j\rangle_r, whose scale dependence is inherited from ξss(r)\xi_{ss}(r).

Since the luminosity scatter in Eq. (3) is defined in natural-log space, the luminosity mark depends exponentially on the residual,

Li=L‾(Mi)exp⁡(σlog⁡Lϵi).(18)L_i = \overline{L}(M_i)\exp\left(\sigma_{\log L}\epsilon_i\right). \tag*{(18)}

Expanding this dependence to leading order, as done in Eq. (5), shows that the correlated contribution to the product of two luminosity marks scales as

⟨δmiδmj⟩r∝σlog⁡L2ρ2ξss(r).(19)\left\langle\delta m_i\delta m_j\right\rangle_r \propto\sigma_{\log L}^{2}\rho^2\xi_{ss}(r). \tag*{(19)}

Thus, ξss(r)\xi_{ss}(r) provides the scale-dependent term that distinguishes the two luminosity models: Model A contains only the mass-dependent marked signal and uncorrelated luminosity scatter, while Model B contains an additional correlated residual whose amplitude is controlled by σlog⁡L\sigma_{\log L} and ρ\rho.

Revealing property-based galaxy assembly bias

Models A and B define a controlled null experiment. Model A contains the luminosity dependence associated with halo mass together with independent scatter, whereas Model B preserves the same mean mass–luminosity relation and scatter while correlating the luminosity residuals with a secondary halo property.

This test describes a property-based galaxy assembly bias to model the dependence of galaxy properties (in this case luminosity) on secondary halo properties at fixed halo mass. This follows the broader definition in which galaxy assembly bias may arise when either the occupation or the properties of galaxies depend on halo properties beyond mass [5]. In our construction, the galaxy occupation is held fixed in both models. Then for fixed number NN, Model A luminosity LL satisfies

PA(L∣M)=P(L∣M),(20)P_{\mathrm{A}}(L|M) = P(L|M), \tag*{(20)}

whereas for Model B

PB(L∣M,s)≠P(L∣M).(21)P_{\mathrm{B}}(L|M,s) \ne P(L|M). \tag*{(21)}

This differs from occupation-based implementations of galaxy assembly bias, in which a secondary halo property changes the probability distribution of galaxy occupation at fixed halo mass [12, 17, 40]. In our construction, the halo occupation and galaxy positions are held fixed. Model B changes the luminosity distribution conditioned on the secondary property, PB(L∣M,s,N)≠PA(L∣M,N)P_{\mathrm{B}}(L \mid M,s,N) \ne P_{\mathrm{A}}(L \mid M,N), while preserving the mass-conditioned luminosity distribution after marginalizing over ss, PB(L∣M,N)=PA(L∣M,N)P_{\mathrm{B}}(L \mid M,N) = P_{\mathrm{A}}(L \mid M,N). Thus, the halo two-point clustering is unchanged, and the difference between the models appears only in the luminosity-weighted statistic. Conceptually similar property-based constructions have been used in age-matching and galactic-conformity models, which correlate galaxy colour with halo age or concentration at fixed luminosity while leaving the underlying galaxy catalogue unchanged [22, 41]. Our construction applies this logic to luminosity residuals at fixed halo mass and isolates the resulting spatial signal using luminosity-weighted marked clustering.

Our primary observable is the difference between the projected marked correlation functions of the two models,

ΔMp(rp)≡MpB(rp)−MpA(rp).(22)\Delta\mathcal{M}_p(r_p) \equiv\mathcal{M}_p^{\mathrm{B}}(r_p) - \mathcal{M}_p^{\mathrm{A}}(r_p). \tag*{(22)}

For a fixed galaxy sample, Models A and B have identical galaxy positions. Their ordinary projected correlation functions are therefore identical by construction,

wpA(rp)=wpB(rp).(23)w_p^{A}(r_p)=w_p^{B}(r_p). \tag*{(23)}

A non-zero ΔMp(rp)\Delta\mathcal{M}_p(r_p) demonstrates that luminosity-weighted clustering contains information that is not present in the unweighted two-point correlation function.

A dependence of luminosity on a secondary halo property alone does not necessarily generate an additional clustering signal. The secondary property must itself be spatially correlated at fixed halo mass. In our model, these two ingredients are represented by the luminosity–secondary-property coupling ρ\rho and the marked correlation ξss(r)\xi_{ss}(r), respectively. Their combination propagates the secondary halo dependence into the luminosity-weighted clustering signal. The expected leading-order response is then:

ΔMp(rp)≃[σlog⁡Lρ]2ξss(rp),(24)\Delta\mathcal{M}_p(r_p) \simeq[\sigma_{\log L}\rho]^2 \xi_{ss}(r_p), \tag*{(24)}

where ξss(rp)\xi_{ss}(r_p) is the marked correlation function of the standardized secondary halo property defined in Eq. (17). The scale dependence of ξss\xi_{ss} determines the expected behaviour of the additional luminosity-weighted clustering signal.

If ss represents a halo property that can be standardised and it is related to halo assembly history, such as concentration, a detection of

ΔMp(rp)≠0(25)\Delta\mathcal{M}_p(r_p) \ne0 \tag*{(25)}

implies that galaxy luminosity, and hence luminosity-weighted clustering, depends on halo information beyond mass alone. In the controlled experiment considered here, this additional dependence constitutes a galaxy assembly-bias term.

(24) shows that the amplitude of the signal depends on luminosity scatter σlog⁡L\sigma_{\log L}, the strength of the coupling ρ\rho, and the clustering of the secondary property ξss(rp)\xi_{ss}(r_p). The marked auto-correlation is even in ρ\rho and primarily constrains the magnitude ∣ρ∣|\rho| rather than its sign. Determining whether the luminosity residual correlates positively or negatively with the secondary halo property would require an observable that is linear in the two residual fields, such as their cross-correlation.

Simulations and mock catalogues

We use NN-body simulations to characterize halo properties and test their possible contribution to luminosity-weighted clustering. We construct mock catalogues designed to resemble the DESI Bright Galaxy Survey (BGS) public data release 1 (DR1), a low-redshift spectroscopic galaxy survey whose targets are selected using photometry from the DESI Legacy Imaging Surveys [42, 43].

We construct DESI-BGS-like mock observations to test our luminosity-weighted clustering model. This analysis builds on earlier studies of luminosity- and morphology-dependent clustering using marked statistics in the Southern Sky Redshift Survey 2 [30] and of luminosity- and colour-weighted marked correlations in the Sloan Digital Sky Survey Main Galaxy Sample [32, 35]. Our aim is to extend this line of work with a substantially larger low-redshift sample and to use the BGS-like mocks to test sensitivity to secondary halo properties. DESI-BGS is well suited to this purpose because it combines spectroscopic redshifts with broad-band photometry. We construct a volume-limited sample over the BGS redshift range following Abdul Karim et al. [44], applying Mr<−21.5M_r < -21.5 to the DR1 sample. This selection yields an approximately constant number density of n≃5.5×10−4 h3 Mpc−3n \simeq5.5 \times10^{-4}\,h^3\,\mathrm{Mpc}^{-3}.

Halo catalogue

We create a mock sample from haloes of the catalogue from [45], based on Millennium XXL simulations [46], which provides a halo light-cone with enough number density to sample the target galaxies of DESI-BGS. Correspondingly, The Millennium XXL simulation runs in a box of size Lbox=3 h−1 GpcL_{\mathrm{box}} = 3\,h^{-1}\,\mathrm{Gpc} with a particle resolution of Mp=6.17×109 h−1 M⊙M_{\mathrm{p}} = 6.17 \times10^9\,h^{-1}\,M_\odot. Due to requirements of the BGS target number density of DR1, we keep haloes of Mh=1011 h−1 M⊙M_{\mathrm{h}} = 10^{11}\,h^{-1}\,M_\odot, which corresponds to roughly 16 particles.

We choose the halo catalogue instead of the galaxy mocks in [47] to exploit extra properties beyond halo masses to define luminosity marks, which are not available in the released mock galaxy catalogues, and to have some flexibility with the galaxy prescription as presented in the next section. In particular, we use rvmaxr_{\mathrm{vmax}} to define concentration cc for individual haloes, which is present in the parent halo catalogue.

Galaxy mock

From the halo catalogue, we choose the HOD prescription presented in [45]. Here, NcenN_{\mathrm{cen}} is a softened transition spline-like cumulative function using halo mass M200mM_{200\mathrm{m}}, so the parameters of central occupation like log⁡Mmin⁡\log M_{\min} and σlog⁡M\sigma_{\log M} are functions of a luminosity threshold that evolves with redshift to match the observed luminosity function. The mean satellite occupation is a power law above a threshold mass, with explicit cut-off where NsatN_{\mathrm{sat}} vanish below M0M_0. The central treatment is a bit different from the usual 5-parameter HOD definition in [48], which is required to achieve the target number density of BGS light-cone with this halo catalogue. We refer the readers to the [45, 49] papers for a further explanation and how the luminosity function fit is performed. This HOD sets produce volume complete samples at a redshift range 0.1<z<0.40.1 < z < 0.4, to mimic the same behaviour of BGS DR1. The initial galaxy number density using this method yields ngal=9.28×10−4 h3 Mpc−3n_{\mathrm{gal}} = 9.28 \times10^{-4}\,h^{3}\,\mathrm{Mpc}^{-3}, which we randomly downsample to the DR1 target ngal=5.5×10−4 h3 Mpc−3n_{\mathrm{gal}} = 5.5 \times10^{-4}\,h^{3}\,\mathrm{Mpc}^{-3}. The main purpose is to map halos to galaxies with luminosities, include satellite galaxies, and take intra-halo correlation to a more realistic level than the CLF can provide. We use the average of the luminosity–mass relation provided by the [49] BGS-mock, and use σlog⁡L=0.23\sigma_{\log L} = 0.23 (or 0.15 DEX), which is the mean value of the catalogue. Although this value slightly varies for both for halo mass and redshift, we keep it fix as a first approach, then we vary it during the robustness test in § 2.1 D.

Abacus Summit suite

We include independent halo catalogues from the small suite of Abacus Summit simulations, which consist in 1803 simulations with Mp=2.1×109 h−1 M⊙M_{\mathrm{p}} = 2.1 \times10^{9}\,h^{-1}\,M_{\odot} in a box of Lbox=500 h−1 MpcL_{\mathrm{box}} = 500\,h^{-1}\,\mathrm{Mpc}, prepared to build covariance of the respective summary statistics (wpw_{\mathrm{p}} and MpM_{\mathrm{p}}). These simulations have their own, but equivalent definitions of halo properties [50]. We do the calculations in the redshift snapshot at z=0.35z = 0.35 as a representative volume to measure sample variance in our statistics. We use the HOD parameters of [51], for a volume limited sample of Mr<−21.5M_{\mathrm{r}} < -21.5. the HOD parameter set is {log⁡Mmin⁡,log⁡M0,log⁡M1,σlog⁡M,α}={13.31,11.95,14.15,0.73,0.97}\{\log M_{\min}, \log M_{0}, \log M_{1}, \sigma_{\log M}, \alpha\} = \{13.31, 11.95, 14.15, 0.73, 0.97\} reaching a number density ngal=4.8×10−3 h3 Mpc−3n_{\mathrm{gal}} = 4.8 \times10^{-3}\,h^{3}\,\mathrm{Mpc}^{-3} [51, 52]. These HOD is reported to be used with the Uchuu simulations [53], but we reach the same target number density as the volume-limited sample reported [52]. To generate each mock, we use a new random seed for each simulation to quantify HOD random noise (see § 2.1 D), which represents a relevant stochastic term in the marker correlation function calculations. We also check the mean clustering and marked clustering over the covariance results match the ones from the production mock, reaching agreements below 3%.

marked correlation function in DESI BGS mock

Estimator

We estimate the correlation functions in redshift space using the pycorr package. The mock galaxies and random points positions are supplied as (RA, Dec, χ\chi), where χ\chi is the comoving distance in h−1 Mpch^{-1}\,\mathrm{Mpc} calculated using a flat Λ\LambdaCDM cosmology with H0=73 km s−1 Mpc−1H_{0} = 73\,\mathrm{km}\,\mathrm{s}^{-1}\,\mathrm{Mpc}^{-1} and Ωm=0.25\Omega_{\mathrm{m}} = 0.25. We use the rppi estimator, which bins pairs according to their transverse separation rpr_{\mathrm{p}} and line-of-sight separation π\pi. The transverse-separation or projected distance bins are logarithmically spaced between 0.10.1 and 80 h−1 Mpc80\,h^{-1}\,\mathrm{Mpc} using 20 bins, while the line-of-sight separation is divided into 80 linearly spaced bins between −40<π/(h−1 Mpc)<40-40 < \pi/(h^{-1}\,\mathrm{Mpc}) < 40 as specified in pycorr.

The random catalogues follow the same angular and radial selection as the mock galaxies. Random right ascensions are drawn uniformly in angle, while declinations are drawn uniformly in sin⁡(Dec)\sin(\mathrm{Dec}) so that the points are uniformly distributed over solid angle. Random redshifts are drawn by sampling the redshift distribution of the selected mock galaxies. The random catalogues contain Nr=3N_{\mathrm{r}} = 3 times as many random points as galaxies, where NrN_{\mathrm{r}} was kept between 3 and 10, showing a stable result.

The unweighted correlation function is estimated with the Landy–Szalay estimator,

ξ(rp,π)=DD−2DR+RRRR,(26)\xi(r_{\mathrm{p}},\pi) = \frac{DD - 2DR + RR}{RR}, \tag*{(26)}

where DDDD, DRDR, and RRRR are the normalized data–data, data–random, and random–random pair counts.

For each galaxy, we define the luminosity mark as defined by Equation (4). The mean luminosity value is ⟨L⟩=1.829×1010 h−2 L⊙\langle L \rangle= 1.829 \times10^{10}\,h^{-2}\,L_{\odot}, which is consistent with a magnitude range −18.5≳Mr≳−23.8-18.5 \gtrsim M_{\mathrm{r}} \gtrsim-23.8 observed by BGS galaxies with MrM_{\mathrm{r}} the rest frame rr-band absolute magnitude. Luminosities are calculated from the luminosity–halo mass relation used in [35], which is defined from the luminosity dependence in the correlation function from [54]. This definition define the mark in the range 0.05≲mi≲7.10.05 \lesssim m_{i} \lesssim7.1 with median mmedian=0.831m_{\mathrm{median}} = 0.831. This means that the current definition of mark, up-weights more massive and luminous galaxies only, whereas around 60% of galaxies have m<1m < 1. The marked correlation is measured by passing these marks as individual data weights to pycorr. The random catalogue is unweighted, corresponding to unit random weights, and the pair contribution to the weighted data–data and data–random counts is proportional to the product of the galaxy marks. To asses the clustering of intra-halo galaxies where the luminosity effect is stronger, as schemed in Figure 1, we calculate the projected correlation function through

wp(rp)=∫−πmax⁡+πmax⁡ξ(rp,π) dπ.(27)w_p(r_p) = \int_{-\pi_{\max}}^{+\pi_{\max}} \xi(r_p,\pi)\,\mathrm{d}\pi. \tag*{(27)}

For the luminosity-weighted catalogue, the analogous quantity is calculated from the weighted correlation function,

wpL(rp)=∫−πmax⁡+πmax⁡WL(rp,π) dπ.(28)w_p^{L}(r_p) = \int_{-\pi_{\max}}^{+\pi_{\max}} W_L(r_p,\pi)\,\mathrm{d}\pi. \tag*{(28)}

The projected marked correlation function is constructed from the ratio of the projected luminosity-weighted and unweighted pair densities,

Mp(rp)=∫−πmax⁡+πmax⁡[1+W(rp,π)] dπ∫−πmax⁡+πmax⁡[1+ξ(rp,π)] dπ,(29)\mathcal{M}_p(r_p) = \frac{\int_{-\pi_{\max}}^{+\pi_{\max}} [1 + W(r_p,\pi)]\,\mathrm{d}\pi} {\int_{-\pi_{\max}}^{+\pi_{\max}} [1 + \xi(r_p,\pi)]\,\mathrm{d}\pi}, \tag*{(29)}

The terms 1+ξ1 + \xi and 1+W1 + W represent the full unweighted and marked pair densities, respectively. The constant term accounts for the unclustered pair contribution, while ξ\xi and WW describe the corresponding excess pair counts. Alternatively, the projected marked correlation can equivalently be written as

Mp(rp)=1+wpL(rp)/(2πmax⁡)1+wp(rp)/(2πmax⁡),(30)\mathcal{M}_p(r_p) = \frac{1 + w_p^{L}(r_p)/(2\pi_{\max})} {1 + w_p(r_p)/(2\pi_{\max})}, \tag*{(30)}

which accounts for the units ([h−1 Mpch^{-1}\,\mathrm{Mpc}]) of the projected correlation function integrals.

Measuring the secondary clustering term

We estimate the luminosity-marked correlation function for the BGS mock we created and show it in Figure 3. The top panel of Figure 3 shows the projected marked correlation function for mock generated cases A (red) and B (blue), where residuals are uncorrelated and correlated respectively. We also include a theory fit based on the Skibba et al. halo model, with best-fit parameters log⁡10(Mmin⁡/h−1M⊙)=12.948\log_{10}(M_{\min}/h^{-1}M_{\odot}) = 12.948, M1/Mmin⁡=48.89M_1/M_{\min} = 48.89, αHOD=1.218\alpha_{\mathrm{HOD}} = 1.218, and satellite luminosity fraction Lsat/Lcen=0.5L_{\mathrm{sat}}/L_{\mathrm{cen}} = 0.5. The occupation fraction is focc=0.625f_{\mathrm{occ}} = 0.625, giving ngal=5.21×10−4 h3 Mpc−3n_{\mathrm{gal}} = 5.21 \times10^{-4}\,h^{3}\,\mathrm{Mpc}^{-3}. The theory yields a number density similar to the BGS mock, which validates the CLF model as a simpler approach for creating

Figure 3. Top: Luminosity-weighted marked correlation function Mp\mathcal{M}_{p} as function of projected distance rpr_{p} for BGS mocks of Model A (red) and Model B (blue). We add the theory described in Skibba et al. to show the the behaviour of the mass only model for lower amplitude of Mp\mathcal{M}_{p}. Bottom: ΔMp≡MpB−MpA\Delta\mathcal{M}_{p} \equiv\mathcal{M}_{p}^{B} - \mathcal{M}_{p}^{A} for the functions showed in top. We additionally add the standard deviation of the ΔMp\Delta\mathcal{M}_{p} data vector obtained from the covariance to show the variation around zero. The scale dependence of ΔMp\Delta\mathcal{M}_{p} is proportional to the marked correlation function of the secondary property ξss\xi_{ss}.

a mock where luminosity depends only on mass. For each halo of mass MiM_i, we use the individual concentration cic_i and then calculate sis_i using equation (13). We use log⁡cˉ\log\bar{c} and σlog⁡c\sigma_{\log c} from a 40-bin configuration, where the first 30 bins are equally spaced in log⁡M\log M between 1011−1014 h−1M⊙10^{11} - 10^{14}\,h^{-1}M_{\odot}. The remaining 10 bins cover the high-mass tail, M>1014 h−1M⊙M > 10^{14}\,h^{-1}M_{\odot}, and are constructed to contain approximately the same number of haloes. In the bottom panel of Figure 3, we show ΔMp\Delta\mathcal{M}_p to test Equation (25), where we see a large absolute deviation consistently happening below r<1 h−1 Mpcr < 1\,h^{-1}\,\mathrm{Mpc} reaching a maximum in the smallest tested distance up to r=0.1 h−1 Mpcr = 0.1\,h^{-1}\,\mathrm{Mpc}. This result in an intra-halo term dependency that the marked correlation function difference ΔMp\Delta\mathcal{M}_p captures. We calculate uncertainties of ΔMp\Delta\mathcal{M}_p, which are derived from the covariance matrix, using the AbacusSummit small set. The previous result represents the product σlog⁡L2ξss\sigma_{\log L}^{2}\xi_{ss} as showed in Equation (24). The scale dependence of ΔMp\Delta\mathcal{M}_p represents ξss\xi_{ss} the ss-weighted-field correlation function. As this is a leading order result an independent calculation of ξss\xi_{ss}, it can be used to recover the correlation coefficient amplitude ∣ρ∣|\rho|. We explain this in the next section.

Test recovery

To test whether this model can be applied to the real observable data, we look to recover the correlation coefficient ρ\rho by applying Eq. (24). In this controlled experiment, σlog⁡L\sigma_{\log L} is known (from a calibrated simulation), and ss is infused in the luminosity mass relation correlated with coefficient ρin\rho_{\mathrm{in}}. As we can estimate ξss\xi_{ss} independently through the mock, we fit ρout\rho_{\mathrm{out}} directly from our measurement of ΔMp\Delta\mathcal{M}_p. Such a test intends to test the strength of the coupling between luminosity residual and ss, and to reveal the minimum value of ρout\rho_{\mathrm{out}} we can recover.

The potential detection of assembly bias by estimating ΔMp\Delta\mathcal{M}_p between theory (or mass-only dependent mock) and the observed luminosity marked correlation functions depends on the strength of the coupling, making the recovery of ρout\rho_{\mathrm{out}} a test to validate the model. For this purpose, we need two ingredients: A template to fit ρ\rho to the observed ΔMp\Delta\mathcal{M}_p. Then, at fixed σlog⁡L=0.23\sigma_{\log L}=0.23 as extracted from the BGS mock, we are trying to find the amplitude q^\hat{q}:

q^=ξssTC−1ΔMpξTC−1ξ(31)\hat{q}=\frac{\boldsymbol{\xi}_{ss}^{\mathsf{T}}\mathbf{C}^{-1}\Delta\mathcal{M}_p}{\boldsymbol{\xi}^{\mathsf{T}}\mathbf{C}^{-1}\boldsymbol{\xi}} \tag*{(31)}

that minimises the distance between ξss\xi_{ss} and ΔMp\Delta\mathcal{M}_p. The least squares then finds ρout=q/exp⁡(σlog⁡L)\rho_{\mathrm{out}}=\sqrt{q}/\exp(\sigma_{\log L}). The recovered ρout\rho_{\mathrm{out}} is shown in Figure 4, where for the tested values of ρin\rho_{\mathrm{in}}, which is injected as shown in Eq. (14), are very close to the expected real value of ρ\rho in Figure 4. This seems to be valid even for smaller values of ρ\rho, where the precision of ρ\rho is lost at 10% level for small values of ρ∼0.01\rho\sim0.01. However, we consider these ρ\rho values extremely low compared to the real cases we want to test, and these will also be consistent with a random case where errors are uncorrelated (ρ=0.0\rho=0.0). We keep values of between 0.1<ρ<1.00.1<\rho<1.0, which are all recovered with sub-percent precision to evaluate the possible detection of ξss\xi_{ss} in the data.

Figure 4. Top: Relation between the recovered ρout\rho_{\mathrm{out}} value vs the correlation coefficient used as the input ρin\rho_{\mathrm{in}} (red crosses). We show a range in logarithmic scale between 0.001<ρ<10.001 < \rho< 1 to highlight the accuracy of the recovered value compared to the identity (black dashed line). Bottom: We add the relative residual (Δρ≡ρin−ρout\Delta\rho\equiv\rho_{\mathrm{in}} - \rho_{\mathrm{out}})/ρin\rho_{\mathrm{in}} to highlight where the performance of the recovered ρout\rho_{\mathrm{out}} decreases, being less accurate (<10%< 10\%) for ρ<0.01\rho< 0.01. This test indicates sub-percent accuracy for the explored range 0.1<ρ<1.00.1 < \rho< 1.0.

Detection, robustness and systematics

To determine whether we can claim a detection from the null model, we need the following: Given the covariance of the null case (model A), what values of ρ\rho and up to what scale of ξss\xi_{ss} the χ2\chi^2 defines a pp-value where this effect indicates a measurement. The χ2\chi^2 test is shown in Figure 5, where we calculate this value as function of ρ\rho (top panel). As expected the χ2\chi^2 value grows with the correlation strength being maximum at ρ=1\rho=1 (or ρ=−1\rho=-1). We emphasize that ∣ρ∣=1|\rho|=1 is far from realistic, because it would imply a full correlation between scatter of L(M)L(M) and c(M)c(M), which results in a deterministic relation between LL and cc. For more realistic scenarios, we find that for ρ>0.512\rho>0.512 the curve goes over valid pp-value (dashed line, bottom panel) threshold using all the explored scales of ΔMp\Delta\mathcal{M}_p as shown in the bottom panel of

Figure 5. Top: χ2\chi^2 value as function of the correlation coefficient ρ\rho for the range 0.2<ρ<1.00.2<\rho<1.0 using 20 degrees of freedom. Bottom: the corresponding pp-value for the χ2\chi^2 values in top as function of ρ\rho and the number of distance bins in ΔMp\Delta\mathcal{M}_p displayed by the middle distance bin (correlation lines). For example a detection (5σ5\sigma significance) occurs when p≤2.13×10−7p\leq2.13\times10^{-7}, which is crossed for ρ≈0.64\rho\approx0.64. For higher values of ρ\rho detection is still calculated even for the removed smaller distance bins, where the information is contained. We also highlight the 2σ2\sigma (indication; dashed line) where ξss\xi_{ss} could still be measured against the null case.

Figure 5. At the same time we find that we only need scales of rp>0.88 h−1 Mpcr_p>0.88\,h^{-1}\,\mathrm{Mpc} for large correlation or ρ∼1\rho\sim1. Statistically, this means that for these configurations the test has less than 5% to be null case. For a detection (5σ5\sigma, using 20 degrees-of-freedom (dof)), ρ≥0.629\rho\geq0.629 is required with all distance bins (r>0.11 h−1 Mpcr>0.11\,h^{-1}\,\mathrm{Mpc}) with p=2.13×10−7p=2.13\times10^{-7}.

We perform additional test to quantify the impact of some of the choices made during the calculations of the marked correlation function to justify the detection of this galaxy-luminosity assembly bias through this method. We run 100 mock realizations with the fixed HOD parameters of the abacus run varying the random seeds that set halo occupation of central and satellite galaxies. For each realization, different haloes contribute to the mock, which introduces a possible selection effect in the mass-based mark as haloes will have different internal structure, as we look for differences in the 1-halo term. The projected correlation functions wp(rp)w_p(r_p) and Mp\mathcal{M}_p are measured in the same default configuration than the production and covariance mocks. At scales where rp<1h−1 Mpcr_p<1h^{-1}\,\mathrm{Mpc}, the scatter introduced by the HOD variance (we call it HOD noise) reaches a maximum of 5.5% in the smallest distance bin. This is expected as we measure how the random noise of the HOD (variance) impacts the marked correlation function, which is an important factor, but it is still smaller than the marked correlation sample covariance, which is between 17-20% as shown in Figure 3.

To determine how the luminosity–mass relation scatter changes as function of halo mass affecting the possible detection of galaxy assembly bias. We run the test for the fixed HOD varying σlog⁡L\sigma_{\log L}. The first test includes a smaller value of σlog⁡L=0.1\sigma_{\log L}=0.1 DEX, than the one used initially (σlog⁡L=0.15\sigma_{\log L}=0.15 DEX). In the other hand, we include σlog⁡L=0.2\sigma_{\log L}=0.2 DEX, to have an idea of the scaling of the detectability for different scatter amplitudes making the test for a fixed value of ρ=0.7\rho=0.7. The test shows variations in the χ2\chi^2 affecting the significance by ∼2\sim2–3σ3\sigma, meaning that if we consider σlog⁡L=0.1\sigma_{\log L}=0.1 DEX with reduced luminosity scatter the detectability of the model is largely reduced. This would affect models with correlation strength of ρ∼0.5\rho\sim0.5. In particular, for the tested case with ρ=0.7\rho=0.7, the significance is around ∼4σ\sim4\sigma even after the reduced luminosity scatter is applied. For the case where σlog⁡L=0.2\sigma_{\log L}=0.2 DEX, the detection improves, this is due to the observable ΔMp\Delta M_p scaling directly with σlog⁡L\sigma_{\log L}. In the real case the luminosity–mass scatter is both a function of halo mass and redshift, which fluctuates between 0.11<σlog⁡L<0.170.11<\sigma_{\log L}<0.17, making it necessary to accurately quantify this value for applying this test. We leave a varying modelling of σlog⁡L\sigma_{\log L} for a future study, where a real observational dataset is used.

Additionally, we study the behaviour of ΔMp\Delta M_p when systematic weights are included in the modelling. As the DESI clustering modelling reveals, PIP weights that account for the incompleteness of fibre collisions remain a relevant systematic to deal with, when studying the clustering at small scales [55], where more of the signal of this test comes from. By defining a luminosity-scale-dependent relation, it is relevant to correctly model the observation of galaxies inside the same halo. Considering, the complete addition of PIP weights requires resources we currently lack (mocks that actually account the spectrograph fibre patterns), we perform a simplified test using the individual inverse probability, which accounts for loosing galaxies at small separations. In summary, we introduce the redshift probability p(z)p(z), which gives a weight to the individual galaxies depending on their redshifts. The current scheme removes between 20–35% of galaxies in the explored redshift range with a small impact in both the wpw_p and Mp\mathcal{M}_p calculation, producing between 1–4% differences in the relevant scales. The results impacts wpw_p more as the scheme is similar to a random sampling (removing ∼30%\sim30\%), producing an additional bias of 1%. We also account for angular selection, including a distance dependent weight which accounts for loosing galaxies due to fibre collisions. We decide to keep the current IIP+angular weights for the recovering, to account the additional introduced noise due to this particular systematic.

We apply this for Mock A and Mock B and the case of σlog⁡L=0.23\sigma_{\log L}=0.23 and ρ=0.7\rho=0.7, to see how would affect a possible detection. In Figure 6, we assess the impact of the new weights in our configuration, plotted as the relative residual with respect to the respective null case (with and without systematics). We see the effect of this weighting scheme in our test for this configuration impacts small scales and adds an extra variance on the same level than the null-covariance, reducing the final χ2\chi^2-value by 1.6σ1.6\sigma. Such a effect would become relevant again for the cases where ρ∼0.5\rho\sim0.5, where the p=0.05p=0.05 is close to the indication threshold. A more faithful approach to overcome this issue, would be to use the correct PIP case, which deals better with fibre collisions. We leave this analysis for a future work, which will be necessary to claim a detection. As this study points more to the proof-of-concept approach, where the intention is to study how the systematics affect the robustness of the test, we keep this simpler analysis.

Figure 6. Relative residual ΔMp/MpA\Delta M_p/M_p^A as function of distance rpr_p for the case with ρ=0.7\rho=0.7 and σlog⁡L=0.23\sigma_{\log L}=0.23 (0.15 DEX) (blue) when systematic effects are accounted (dashed line) divided by the null case (model A; red dashed line). In this scenario, we account for galaxy selection systematics modelled with the Inverse Individual Probability (IIP) scheme, plus angular selection weight. We show the relative residual to highlight how ΔMp\Delta M_p looks against the standard deviation from the null covariance (red shaded region) and how the variance of the weights is included (red dotted line).

Conclusions

We use the luminosity-weighted marked correlation function to test whether galaxy luminosities contain spatially correlated secondary halo information beyond that encoded by halo mass. We describe a secondary halo property through its standardized residual ss at fixed mass and characterize the new spatial correlation ξss\xi_{ss}. As a proof of concept, we correlate luminosity residuals with concentration residuals at fixed halo mass, using a concentration proxy derived from rvmaxr_{\mathrm{vmax}}. This construction preserves the mean luminosity–mass relation and its scatter while generating an additional, scale-dependent contribution to the marked correlation function. Although concentration provides a physically motivated example because of its connection to halo assembly history and secondary halo bias, the framework can be applied to any halo property that can be standardized at fixed mass and whose residuals are spatially correlated.

We apply the test to a mock catalogue that resembles the DESI-BGS DR1. Because ξss\xi_{ss} can be measured independently in the simulation and σlog⁡L\sigma_{\log L} is fixed, we recover the amplitude of the luminosity–secondary-property coupling, ∣ρ∣|\rho|. In the baseline configuration, the additional marked-clustering contribution can be distinguished from the null hypothesis at 95% confidence for ∣ρ∣>0.52|\rho| > 0.52, assuming σlog⁡L=0.23\sigma_{\log L} = 0.23. Using a null covariance that includes sample variance and stochasticity in the halo occupation, the mass-only hypothesis is rejected at greater than 5σ5\sigma significance for ∣ρ∣>0.63|\rho| > 0.63 when scales rp>0.11 h−1 Mpcr_p > 0.11\,h^{-1}\,\mathrm{Mpc} are included. The sensitivity decreases when the smallest scales are removed, demonstrating that much of the constraining information arises from intra-halo galaxy pairs. Tests of HOD stochasticity, luminosity-scatter uncertainty, and approximate fibre-assignment and angular-selection effects show that these systematics can reduce the detection significance. A complete treatment using PIP weights will be required when applying the method to DESI observations.

The framework developed here can be applied directly to observational data by comparing the measured luminosity-weighted marked correlation function with a mass-only prediction calibrated to the same galaxy sample. A non-zero luminosity-marked signal alone would

not constitute evidence for galaxy assembly bias, since such a signal is already expected from the joint dependence of galaxy luminosity and clustering on halo mass. The relevant diagnostic is instead a statistically significant, scale-dependent deviation from the calibrated mass-only baseline after its modelling uncertainties and observational systematics have been accounted for. Once uncertainties in this baseline and observational systematics are accounted, such a deviation would indicate that luminosity residuals contain spatially correlated information beyond halo mass, providing evidence for a property-based manifestation of galaxy assembly bias. The principal contribution of this work is therefore not a new marked statistic, but a controlled interpretation that turns an established measurement into an observational null test for property-based galaxy assembly bias.

Acknowledgments

JA acknowledges useful discussions with Tiago Castro, Daniel López-Cano, and Ginevra Favole. This work was supported by the São Paulo Research Foundation (FAPESP), Grant No. 2025/11898-5. RV was supported by a FAPESP fellowship, Proc. 2026/00876-3. RA acknowledges support from FAPESP and CNPq. ADMD acknowledges support from the Universidad Técnica Federico Santa María through the Proyecto Interno Regular PILR_25_04. OpenAI ChatGPT and Codex Sol 5.6 were used to assist with language editing and proofreading. All suggestions were reviewed and revised by the authors.

References

References

  1. [1]F. Bernardeau, S. Colombi, E. Gaztañaga, and R. Scoccimarro, Phys. Rep. 367, 1 (2002), arXiv:astro-ph/0112551 [astro-ph].DOI
  2. [2]R. E. Angulo and O. Hahn, Living Reviews in Computational Astrophysics 8, 1 (2022), arXiv:2112.05165 [astro-ph.CO].DOI
  3. [3]W. H. Press and P. Schechter, ApJ 187, 425 (1974).
  4. [4]S. D. M. White and M. J. Rees, Monthly Notices of the Royal Astronomical Society 183, 341 (1978), https://academic.oup.com/mnras/article-pdf/183/3/341/2943374/mnras183-0341.pdf.
  5. [5]R. H. Wechsler and J. L. Tinker, Annual Review of Astronomy and Astrophysics 56, 435 (2018).
  6. [6]A. A. Berlind and D. H. Weinberg, ApJ 575, 587 (2002), arXiv:astro-ph/0109001 [astro-ph].DOI
  7. [7]X. Yang, H. J. Mo, and F. C. van den Bosch, MNRAS 339, 1057 (2003), arXiv:astro-ph/0207019 [astro-ph].DOI
  8. [8]V. Desjacques, D. Jeong, and F. Schmidt, Phys. Rep. 733, 1 (2018), arXiv:1611.09787 [astro-ph.CO].DOI
  9. [9]H. J. Mo and S. D. M. White, MNRAS 282, 347 (1996), arXiv:astro-ph/9512127 [astro-ph].DOI
  10. [10]R. K. Sheth, H. J. Mo, and G. Tormen, Monthly Notices of the Royal Astronomical Society 323, 1 (2001), https://academic.oup.com/mnras/article-
  11. [11]J. L. Tinker, B. E. Robertson, A. V. Kravtsov, A. Klypin, M. S. Warren, G. Yepes, and S. Gottlöber, ApJ 724, 878 (2010), arXiv:1001.3162 [astro-ph.CO].DOI
  12. [12]A. R. Zentner, A. P. Hearin, and F. C. van den Bosch, MNRAS 443, 3044 (2014), arXiv:1311.1818 [astro-ph.CO].DOI
  13. [13]R. H. Wechsler, A. R. Zentner, J. S. Bullock, A. V. Kravtsov, and B. Allgood, ApJ 652, 71 (2006), arXiv:astro-ph/0512416 [astro-ph].DOI
  14. [14]P. Bett, V. Eke, C. S. Frenk, A. Jenkins, J. Helly, and J. Navarro, MNRAS 376, 215 (2007), arXiv:astro-ph/0608607 [astro-ph].DOI
  15. [15]O. Fakhouri, C.-P. Ma, and M. Boylan-Kolchin, MNRAS 406, 2267 (2010), arXiv:1001.2304 [astro-ph.CO].DOI
  16. [16]L. Gao, V. Springel, and S. D. M. White, MNRAS 363, L66 (2005), arXiv:0506510 [astro-ph].
  17. [17]A. P. Hearin, A. R. Zentner, F. C. van den Bosch, D. Campbell, and E. Tollerud, MNRAS 460, 2552 (2016), arXiv:1512.03050 [astro-ph.CO].DOI
  18. [18]I. Zehavi, S. Contreras, N. Padilla, N. J. Smith, C. M. Baugh, and P. Norberg, The Astrophysical Journal 853, 84 (2018).
  19. [19]M. C. Artale, I. Zehavi, S. Contreras, and P. Norberg, Monthly Notices of the Royal Astronomical Society 480, 3978 (2018), https://academic.oup.com/mnras/article-pdf/480/3/3978/25524068/sty2110.pdf.
  20. [20]S. Contreras, I. Zehavi, N. Padilla, C. M. Baugh, E. Jiménez, and I. Lacerna, Monthly Notices of the Royal Astronomical Society 484, 1133 (2019), https://academic.oup.com/mnras/article-pdf/484/1/1133/27577405/stz018.pdf.
  21. [21]D. J. Croton, L. Gao, and S. D. M. White, MNRAS 374, 1303 (2007), arXiv:astro-ph/0605636 [astro-ph].DOI
  22. [22]A. P. Hearin and D. F. Watson, MNRAS 435, 1313 (2013), arXiv:1304.5557 [astro-ph.CO].DOI
  23. [23]A. D. Montero-Dorta, M. C. Artale, L. R. Abramo, B. Tucci, N. Padilla, G. Sato-Polito, I. Lacerna, F. Rodriguez, and R. E. Angulo, Monthly Notices of the Royal Astronomical Society 496, 1182 (2020), https://academic.oup.com/mnras/article-pdf/496/2/1182/33421726/staa1624.pdf.
  24. [24]A. D. Montero-Dorta, J. Chaves-Montero, M. C. Artale, and G. Favole, Monthly Notices of the Royal Astronomical Society 508, 940 (2021), https://academic.oup.com/mnras/article-pdf/508/1/940/40481309/stab2556.pdf.
  25. [25]K. Wang, Y.-Y. Mao, R. R. Zentner, H. Guo, J. U. Lange, F. C. van den Bosch, and L. Mezini, MNRAS 516, 4003 (2022), arXiv:2204.05332 [astro-ph.GA].DOI
  26. [26]A. N. Pearl, A. R. Zentner, J. A. Newman, R. Bezanson, and e. a. Wang, Kuan, ApJ 963, 116 (2024), arXiv:2309.08675 [astro-ph.CO].arxiv.org/abs/2309.08675
  27. [27]S. Ortega-Martinez, S. Contreras, R. E. Angulo, and J. Chaves-Montero, A&A 697, A226 (2025), arXiv:2411.11830 [astro-ph.CO].
  28. [28]A. N. Salcedo, Z. Yu, Z. Zhang, H. Wang, and e. a. Yang, Science China Physics, Mechanics, and Astronomy 65, 109811 (2022), arXiv:2010.04176 [astro-ph.CO].DOI
  29. [29]Z. Shao, Y. Zu, A. N. Salcedo, J. Wang, X. Yang, and e. a. Weinberg, David H., arXiv e-prints , arXiv:2510.20896 (2025), arXiv:2510.20896 [astro-ph.GA].arxiv.org/abs/2510.20896
  30. [30]C. Beisbart and M. Kerscher, ApJ 545, 6 (2000), arXiv:astro-ph/0003358 [astro-ph].DOI
  31. [31]R. K. Sheth and G. Tormen, MNRAS 350, 1385 (2004), arXiv:astro-ph/0402237 [astro-ph].DOI
  32. [32]R. K. Sheth, A. J. Connolly, and R. Skibba, arXiv e-prints, astro-ph/0511773 (2005), arXiv:astro-ph/0511773 [astro-ph].DOI
  33. [33]M. White and N. Padmanabhan, Monthly Notices of the Royal Astronomical Society 395, 2381 (2009), https://academic.oup.com/mnras/article-pdf/395/4/2381/2943841/mnras0395-2381.pdf.
  34. [34]O. H. E. Philcox, E. Massara, and D. N. Spergel, Phys. Rev. D 102, 043516 (2020), arXiv:2006.10055 [astro-ph.CO].DOI
  35. [35]R. Skibba, R. K. Sheth, A. J. Connolly, and R. Scranton, MNRAS 369, 68 (2006), arXiv:astro-ph/0512463 [astro-ph].DOI
  36. [36]A. Cooray and R. Sheth, Phys. Rep. 372, 1 (2002), arXiv:astro-ph/0206508 [astro-ph].DOI
  37. [37]B. V. Lehmann, Y.-Y. Mao, M. R. Becker, S. W. Skillman, and R. H. Wechsler, ApJ 834, 37 (2017), arXiv:1510.05651 [astro-ph.CO].
  38. [38]G. A. Oyarzún, J. L. Tinker, K. Bundy, E. Xhakaj, and J. S. B. Wyithe, ApJ 974, 29 (2024), arXiv:2409.03004 [astro-ph.GA].DOI
  39. [39]D. López-Cano, R. E. Angulo, A. D. Ludlow, M. Zennaro, S. Contreras, J. Chaves-Montero, and G. Aricò, MNRAS 517, 2000 (2022), arXiv:2207.13718 [astro-ph.CO].
  40. [40]S. Contreras, R. E. Angulo, and M. Zennaro, Monthly Notices of the Royal Astronomical Society 504, 5205 (2021), https://academic.oup.com/mnras/article-pdf/504/4/5205/37957487/stab1170.pdf.
  41. [41]A. Paranjape, K. Kovac̆, W. G. Hartley, and I. Pahwa, Monthly Notices of the Royal Astronomical Society 454, 3030 (2015), https://academic.oup.com/mnras/article-pdf/454/3/3030/4033284/stv2137.pdf.
  42. [42]C. Hahn, M. J. Wilson, O. Ruiz-Macias, S. Cole, and e. a. Weinberg, David H., AJ 165, 253 (2023), arXiv:2208.08512 [astro-ph.CO].DOI
  43. [43]A. Dey, D. J. Schlegel, D. Lang, R. Blum, K. Burleigh, X. Fan, J. R. Findlay, and e. a. Finkbeiner, Doug, AJ 157, 168 (2019), arXiv:1804.08657 [astro-ph.IM].DOI
  44. [44]M. Abdul Karim, J. Aguilar, S. Ahlen, S. Alam, L. Allen, C. Allende Prieto, and DESI Collaboration, Phys. Rev. D 112, 083515 (2025), arXiv:2503.14738 [astro-ph.CO].
  45. [45]A. Smith, S. Cole, C. Baugh, Z. Zheng, R. Angulo, P. Norberg, and I. Zehavi, MNRAS 470, 4646 (2017), arXiv:1701.06581 [astro-ph.CO].DOI
  46. [46]R. E. Angulo, V. Springel, S. D. M. White, A. Jenkins, C. M. Baugh, and C. S. Frenk, Monthly Notices of the Royal Astronomical Society 426, 2046 (2012), https://academic.oup.com/mnras/article-pdf/426/3/2046/3108030/426-3-2046.pdf.
  47. [47]A. Smith, C. Grove, S. Cole, P. Norberg, P. Zarrouk, S. Yuan, and e. a. Aguilar, J., MNRAS 532, 903 (2024), arXiv:2312.08792 [astro-ph.CO].DOI
  48. [48]Z. Zheng, A. A. Berlind, D. H. Weinberg, A. J. Benson, C. M. Baugh, S. Cole, R. Davé, C. S. Frenk, N. Katz, and C. G. Lacey, ApJ 633, 791 (2005), arXiv:astro-ph/0408564 [astro-ph].DOI
  49. [49]A. Smith, S. Cole, C. Grove, P. Norberg, and P. Zarrouk, Monthly Notices of the Royal Astronomical Society 516, 4529 (2022), https://academic.oup.com/mnras/article-pdf/516/3/4529/45985580/stac2519.pdf.
  50. [50]B. Hadzhiyska, D. Eisenstein, S. Bose, L. H. Garrison, and N. Maksimova, MNRAS 509, 501 (2022), arXiv:2110.11408 [astro-ph.CO].DOI
  51. [51]F. Prada, J. E. Erez, A. Smith, J. Lasker, R. Vaisakh, R. Kehoe, and e. a. Dong-Páez, C. A., A&A 698, A170 (2025), arXiv:2306.06315 [astro-ph.CO].DOI
  52. [52]E. F. Fernández-García, F. Prada, A. Smith, J. DeRose, and e. a. Ross, A. J., J. Cosmology Astropart. Phys. 2026, 002 (2026), arXiv:2507.01593 [astro-ph.GA].
  53. [53]T. Ishiyama, F. Prada, A. A. Klypin, M. Sinha, R. B. Metcalf, E. Jullo, B. Altieri, S. A. Cora, D. Croton, S. de la Torre, D. E. Millán-Calero, T. Oogi, J. Ruedas, and C. A. Vega-Martínez, MNRAS 506, 4210 (2021), arXiv:2007.14720 [astro-ph.CO].DOI
  54. [54]I. Zehavi, Z. Zheng, D. H. Weinberg, J. A. Frieman, A. A. Berlind, M. R. Blanton, R. Scoccimarro, R. K. Sheth, and SDSS Collaboration, ApJ 630, 1 (2005), arXiv:astro-ph/0408569 [astro-ph].DOI
  55. [55]A. Smith, J.-h. He, S. Cole, L. Stothert, P. Norberg, and e. a. Baugh, Carlton, Monthly Notices of the Royal Astronomical Society 484, 1285 (2019), https://academic.oup.com/mnras/article-pdf/484/1/1285/27579766/stz059.pdf.

Paper details

vlnc:W_ww6duwb2
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

OpenAI ChatGPT, Codex Sol 5.6

View statement
Looking for related papers…
Contents