betaFeedback

WorksPhysics and Astronomy

Optimization Framework for Full-Skyrmionic Polarimetry

Abstract

Optical skyrmionic beams hold considerable potential for applications in quantum information and weak-intensity detection. These applications require accurate measurements of full topological observables using imaging Stokes polarimetry, with measurement states optimized in advance to limit the effect of stochastic error sources. However, the optimization framework for general Stokes polarimetries is based on a linear reconstruction chain for Stokes vectors and cannot quantitatively evaluate the nonlinear reconstruction of topological observables. Here, we define full-skyrmionic polarimetry (FSP) and construct its optimization framework from the reconstruction chain for full topological observables. Based on existing polarization evaluating functions (PEF), we introduce topological evaluating functions (TEF) and develop a multi-stage FSP optimization methodology. Numerical results confirm that topological optimization can further improve the reconstruction of topological observables, even when the measurement states are already optimal for polarization. Increasing the redundant projection number also effectively suppresses the effects of all stochastic error sources, providing a low-cost methodology to improve the reconstruction of both polarization and topological observables. The FSP optimization framework can identify topologically optimal configurations for arbitrary FSP structures, providing a guideline for high-precision full-skyrmionic measurements at weak-intensity levels and potential skyrmion ellipsometry.

Introduction

Optical skyrmionic beams are topologically protected vector beams whose topology is encoded in Stokes pseudospin fields n={s1,s2,s3}\mathbf{n} = \{s_1, s_2, s_3\}. They show great potential in photonic entanglement [1, 2], topological information transmission [3, 4, 5], single-photon structured light sources [2, 6, 7], and novel light-matter interactions [6, 8, 9] due to their inherent topological number channels and robustness against perturbations. The topology of Stokes skyrmions is manifested in the fact that, across the propagation plane, the pseudo-spin field n(x,y)\mathbf{n}(x,y) can always wrap around the entire Poincaré sphere an integer number of times [10], which is known as the skyrmion number NskN_{\mathrm{sk}}. This topological number is defined by the area integral of the local topological density qskq_{\mathrm{sk}} and is expected to remain stable under weak perturbations.

Currently, it is widely known that Skyrmionic beams can be generated by superposing two OAM beams with mutually orthogonal polarization states [11, 12, 13]. The relative components and cavities, such as metasurfaces, nano-quantum emitters (QEs), metafibers, interferometers, and Sagnac cavities, have been reported recently [7, 14, 15, 16, 17, 18]. However, compared to the diverse generation methodologies, the high-precision measurement of full-skyrmionic observables has not received sufficient attention. Despite the fact that the latter is equally important in advancing Skyrmionic quantum and weak-intensity applications, which demand the optimization of measurement configurations to constrain the effects of stochastic error sources and maximize measurement quality. The full-skyrmionic measurement represents the measurement of the complete set of observables of a skyrmionic beam, including both the general polarization textures and unique topological properties. The complete reconstruction chain naturally involves multiple stages. For high-precision full-skyrmionic measurements at weak-intensity levels, imaging Stokes polarimetry is the main candidate since it provides complete polarization observables and possesses a mature optimization framework. This technique modulates and projects the incident Stokes vector field onto a set of analysis states using a polarization state analyzer (PSA) and then linearly reconstructs the Stokes vector field [19, 20, 21, 22]. The topological and other observables are further extracted from the reconstructed vector fields. Therefore, it can also be called full-skyrmionic polarimetry (FSP). However, existing optimization frameworks for Stokes polarimetry, including evaluating functions and optimization methodology, are based on the linear reconstruction chain of the Stokes field and cannot quantitatively evaluate the measurement quality of topological observables, which results in most skyrmions experiments still using the simplified PSA [17, 18, 23, 24] configuration and lacking metrics to quantify the accuracy and stability. This could make the measurements sensitive to environment and potential positional offsets of optical elements, and introduce extra amplification of stochastic noise. At weak-intensity levels, the limitations may predictably cause severe degradation of measured skyrmionic observables. Thus, one of the key theoretical challenges in high-precision FSP is to investigate the multi-stage reconstruction tion chain of skyrmionic observables and develop a new optimization framework for FSP.

In this article, we theoretically develop the optimization framework for full-skyrmionic polarimetry (FSP) from the reconstruction chain of skyrmionic observables. First, we investigate the effects of two main stochastic error sources, analysis matrix mismatch and composite stochastic noises, on the measurements of FSP, and introduce key topological evaluating functions (TEF) to quantitatively evaluate the reconstruction quality of topological observables (topological density and skyrmion number). Then, we develop a multi-stage optimization methodology that combines polarization and topological optimization. The numerical results show that the topological optimization can further improve the topological reconstruction quality, even after the measurement states are already optimal for polarization. Besides, increasing the redundant projection numbers is verified to reduce the effects of both stochastic error sources on all skyrmionic observables, offering an extra low-cost methodology to optimize FSP. This work directly connects FSP optimization to the reconstruction quality of skyrmionic observables, which provides a guideline for high-precision full-skyrmionic measurements at weak-intensity levels and potential skyrmion ellipsometry.

Basic Concepts

Skyrmionic textures

In the theory of paraxial Stokes skyrmions, a spatially distributed Skyrmionic state-vector or a Skyrmionic beam in pure-state can be constructed by superposing two mutually orthogonal eigenstates ∣↑⟩|\uparrow\rangle and ∣↓⟩|\downarrow\rangle [11, 12, 13, 25], along with their respective vortex modes El1(r,ϕ)E_{l_1}(r,\phi) and El2(r,ϕ)E_{l_2}(r,\phi) carrying different orbital angular momentum (OAM), where the vortex mode components can be Laguerre-Gaussian (LG) or Bessel modes:

∣Ψ(r,φ)⟩=El1(r,φ)∣↓⟩+El2(r,φ)∣↑⟩(1)|\Psi(r,\varphi)\rangle= E_{l_1}(r,\varphi)|\downarrow\rangle+ E_{l_2}(r,\varphi)|\uparrow\rangle \tag*{(1)}

The mutually orthogonal eigenstates {∣↓⟩,∣↑⟩}\{|\downarrow\rangle,|\uparrow\rangle\} correspond to a pair of coordinate points in opposite directions on the Poincaré sphere. The most common combination is the left-hand and right-hand circular polarization states {∣L⟩,∣R⟩}\{|L\rangle,|R\rangle\}, which correspond to the south and north poles. Here, a classic case involves employing the LG vortex mode in Eq. (2) with l1=0l_1=0 and l2=1l_2=1. Substituting them into Eq. (1) will generate a Néél type Skyrmionic texture. The corresponding numerical results are presented in Figure 1-(a) and (b).

Various textures within a same Skyrmionic family

Figure 1. Various textures within a same Skyrmionic family (l1=0l_1 = 0, l2=1l_2 = 1), where the first row visualizes the stereographic projections between R2\mathbb{R}^2 and S2\mathbb{S}^2, where the relative position of the red SPF and blue STF determine the texture type. The second row visualizes the distribution of polarization ellipses corresponding to each texture. The rainbow-colored bars represent the double azimuth of the polarization ellipse, while the black & white bars represent the double ellipticity. (a)∼(b) Néel type (basic type), SPF and STF are completely coincident. (c)∼(d) Bloch type, SPF and STF are coaxial but not coincident. (g)∼(h) Anti-type, SPF and STF are completely opposite.

El(r,φ)=Al(2rω0)∣l∣Lp∣l∣(2r02ω02)e−r02ω02e−ilφ(2)E_l(r,\varphi) = A_l\left(\frac{\sqrt{2}r}{\omega_0}\right)^{|l|}L_p^{|l|}\left(\frac{2r_0^2}{\omega_0^2}\right)e^{-\frac{r_0^2}{\omega_0^2}}e^{-il\varphi} \tag*{(2)}

In fact, arbitrary Skyrmionic textures with a fixed Skyrmion number can be achieved by performing a specific unitary transformation, {∣Ψ⟩,∣↑⟩}=U{∣Λ⟩,∣R⟩}\{|\Psi\rangle,|\uparrow\rangle\}=U\{|\Lambda\rangle,|R\rangle\} (U∈SU(2)U\in\mathrm{SU}(2)), on the eigenstate of a Néel type (basic type) texture [12, 13]. A whole set of textures generated from these SU(2)\mathrm{SU}(2) transformations constructs a skyrmionic family. Furthermore, each SU(2)\mathrm{SU}(2) transformation of the eigenstate can be uniquely mapped to a SO(3)\mathrm{SO}(3) rotation in R3\mathbb{R}^3 space, which implies that we can define two ”flags” with unit length and classify texture types within the same family based on the relative position of the flagpole and flag surface.

As shown in the first row of Figure 1, the red flag fixed on the S2S^2−sphere is defined as the stereographic projection flag (SPF). The negative direction of the flagpole represents the direction of the stereographic projection, S2↦R2∪{∞}S^2\mapsto\mathbb{R}^2\cup\{\infty\}. The x−y−zx-y-z reference frame is tied to the SPF, while the plane x−yx-y is the actual propagation plane of skyrmionic beams. The blue flag is defined as the skyrmionic texture flag (STF). The 1−2−31-2-3 reference system reflects the orientation of the S2S^2−sphere wrapped by the Skyrmionic texture in R3\mathbb{R}^3 abstract space. When the STF and SPF completely overlap, as shown in (a) and (b), the Skyrmionic texture exhibits a basic Néel type; When the STF and SPF have the same flagpole but differ in flag surface orientation by ±π/2\pm\pi/2, as shown in (c) and (d), the texture presents the Bloch types; When the STF and SPF have a π/2\pi/2 angle between their flagpoles, as shown in (e) and (f), the texture appears as bimeron types with two C−points. When the STF and SPF have opposite flagpoles, as shown in (g) and (h), the texture appears as an anti-Skyrmionic type.

Polarization and topological observables

The polarization and topological observables that the FSP reconstructs in a single measurement include the pseudospin field n(x,y)\boldsymbol{n}(x,y), topological density qsk(x,y)q_{\mathrm{sk}}(x,y), and skyrmion number NskN_{\mathrm{sk}}. These physical quantities are all nonlinear functions of Stokes parameters S0∼S3S_0\sim S_3. In paraxial cases [26], four Stokes parameters can be mapped from three Pauli matrices and an identity matrix to analytical form: σj↦Sj=⟨Ψ∣σj∣Ψ⟩\sigma_j\mapsto S_j=\langle\Psi|\sigma_j|\Psi\rangle (j=0,⋯ ,3j=0,\cdots,3) [13, 27], and further expanded as follows:

S0=⟨Ψ1Ψ1∗⟩+⟨Ψ2∗Ψ2⟩,S1=⟨Ψ1Ψ1∗⟩−⟨Ψ2∗Ψ2⟩S2=⟨Ψ1Ψ2∗⟩+⟨Ψ1∗Ψ2⟩,S3=i⟨Ψ1Ψ2∗⟩−⟨Ψ1∗Ψ2⟩(3)\begin{aligned} S_0 &= \langle\Psi_1\Psi_1^*\rangle+\langle\Psi_2^*\Psi_2\rangle, \qquad S_1 = \langle\Psi_1\Psi_1^*\rangle-\langle\Psi_2^*\Psi_2\rangle\\ S_2 &= \langle\Psi_1\Psi_2^*\rangle+\langle\Psi_1^*\Psi_2\rangle, \qquad S_3 = i\langle\Psi_1\Psi_2^*\rangle-\langle\Psi_1^*\Psi_2\rangle \tag*{(3)} \end{aligned}

Since only the last three Stokes parameters carry polarization information, we define a polarization vector, v={S1,S2,S3}\boldsymbol{v}=\{S_1,S_2,S_3\} for convenience. The pseudospin n\boldsymbol{n} can be naturally written as its normalization: n=v/∥v∥={s1,s2,s3}\boldsymbol{n}=\boldsymbol{v}/\|\boldsymbol{v}\|=\{s_1,s_2,s_3\}, where the three elements are precisely equivalent to the parametric equations for the Poincaré sphere: s1=cos⁡(2ϵ)cos⁡(2θ)s_1=\cos(2\epsilon)\cos(2\theta), s2=cos⁡(2ϵ)sin⁡(2θ)s_2=\cos(2\epsilon)\sin(2\theta), and s3=sin⁡(2ϵ)s_3=\sin(2\epsilon). The angular parameters θ\theta and ϵ\epsilon correspond to the azimuth and ellipticity of the polarization ellipse, respectively (the factor of 2 arises from the double covering of SO(3)\mathrm{SO}(3) by SU(2)\mathrm{SU}(2)) [28]. Therefore, the polarization ellipse fields in the second row of Figure 1 can be naturally derived from the pseudospin texture:

θ(x,y)=12arctan⁡(s2s1), ϵ(x,y)=12arcsin⁡(s3)(4)\theta(x,y)=\frac{1}{2}\arctan\left(\frac{s_2}{s_1}\right),\ \epsilon(x,y)=\frac{1}{2}\arcsin(s_3) \tag*{(4)}

Here, θ\theta and ϵ\epsilon are restricted to (0,π](0,\pi] and [−π/4,π/4][-\pi/4,\pi/4], respectively, to ensure the uniqueness of the mapping. The polarization ellipse field directly visualizes the skyrmionic texture in physical space. Spatial variations in ellipse shape and chirality can be used to identify polarization singularities [29, 30]. In addition to these spatial polarization properties, skyrmionic beams are also characterized by local and global topological observables. In the propagation plane x−yx-y, the local topology is described by the topological density qsk(x,y)q_{sk}(x,y), which is defined in terms of the pseudospin field and its derivatives with respect to xx and yy [10, 31, 32]:

qsk(x,y)=14πn⋅(∂n∂x×∂n∂y)(5)q_{sk}(x,y)=\frac{1}{4\pi}\mathbf{n}\cdot\left(\frac{\partial\mathbf{n}}{\partial x}\times\frac{\partial\mathbf{n}}{\partial y}\right) \tag*{(5)}

This quantity describes the local contribution to the topological mapping. Integrating it over the selected effective region Ω\Omega can provide the skyrmion number:

Nsk=∬Ωqsk(x,y) dx dy(6)N_{sk}=\iint_{\Omega}q_{sk}(x,y)\,dx\,dy \tag*{(6)}

The skyrmion number evaluates the number of times the pseudospin field wraps around the Poincaré sphere and is known as a fundamental global topological observable. Other global observables include the polarity pp, vorticity mm, and helicity γ\gamma [17, 27, 33], where the polarity pp describes the relative longitudinal orientation of the core and background pseudospins. The vorticity mm counts the number of times the pseudospin rotates as one moves around the core. The helicity γ\gamma provides the angular offset of the pseudospin from the radial direction, distinguishing Néel, Bloch, and other intermediate textures. These quantities describe specific features of the texture but cannot replace the skyrmion number. Here, we define the Stokes vector S(x,y)\mathbf{S}(x,y) and the pseudospin field n(x,y)\mathbf{n}(x,y) as the reconstructed polarization observables; the topological density qskq_{sk} and the Skyrmion number NskN_{sk} as the final reconstructed topological observables for FSPs, which generate a nonlinear reconstruction chain starting from the detected intensity images: {I1,⋯ ,IN}→{S(x,y),n(x,y)}→{qsk(x,y),Nsk}\{I_1,\cdots,I_N\}\rightarrow\{\mathbf{S}(x,y),\mathbf{n}(x,y)\}\rightarrow\{q_{sk}(x,y),N_{sk}\}.

Optimization Framework

Projection and reconstruction model

As shown in Figure 2, the construction logic of FSP is analogous to that of full-Stokes polarimetry [21, 34]. It requires recording intensity images I1(x,y),…,IN(x,y)I_1(x,y),\ldots,I_N(x,y) through polarization projections performed sequentially in time or simultaneously in separate optical channels. The division-of-time FSP (DOT-FSP) in Figure 2-(b) uses a single CCD camera and a multi-plate polarization state analyzer (MP-PSA) composed of phase retarders (PR) and a linear polarizer (LP). The PSA is adjusted sequentially to provide N≥4N \ge4 analysis states, and the camera records the intensity image for each state. The division-of-space FSP (DOS-FSP) in Figure 2-(c) uses NN cameras to record the intensity images simultaneously through NN separate optical channels, each with its own analysis state. Technically, DOS-FSP can achieve single-shot skyrmionic measurements, but increasing the projections requires additional optical channels and cameras, so the projection number is typically limited to N=4N=4. In contrast, DOT-FSP has fewer components and stochastic noise sources, and it facilitates a large-scale increase in the projection numbers, which makes it better suited for high-precision skyrmionic measurements. Thus, we focus on DOT-FSP in the following analysis. The polarization projection of an FSP is described as a linear mapping of the Stokes vector in Mueller calculus, given by Ii=ai(Mi)SI_i=\mathbf{a}_i(\mathbf{M}_i)\mathbf{S}, where the vector ai\mathbf{a}_i is the projection basis and is defined by the first row of the 4×44 \times4 Mueller matrix Mi\mathbf{M}_i for the ii-th projection (1≤i≤N1 \le i \le N) [19, 21, 35, 36]. For a MP-PSA in Figure 2-(b), the total Mueller matrix can be described as the sequential product of the Mueller matrices of the individual components:

Diagrams of two types of Full-Skyrmionic polarimetry

Figure 2. Diagrams of two types of Full-Skyrmionic polarimetry (FSP). SBG: Skyrmionic beam generator. (a) Polarization projections and the reconstruction of polarization and topological observables, where error sources 1 and 2 affect the projection and reconstruction, respectively. (b) Division-of-time FSP (DOT-FSP), which requires sequential acquisition but allows a large number of projections, making it a preferred choice for high-precision skyrmionic measurements. (c) Single-shot division-of-space FSP (DOS-FSP), which acquires intensity images simultaneously through parallel polarization projections. The projection number is typically limited to N=4N=4 since increasing the projection requires additional optical channels.

Mi(βP,βR1,⋯ ,βRm)=MP(βP)∏j=1mMRj(βRj)(7)\mathbf{M}_i\left(\beta_P,\beta_{R1},\cdots,\beta_{Rm}\right)=\mathbf{M}_P\left(\beta_P\right)\prod_{j=1}^{m}\mathbf{M}_{Rj}\left(\beta_{Rj}\right) \tag*{(7)}

Here, MP\mathbf{M}_P and MRj\mathbf{M}_{Rj} represent the Mueller matrices of the LP and the jj-th PR (counting from right to left), respectively, where the variables include m+1m+1 azimuth angles βP\beta_P and βR1,…,βRm\beta_{R1},\ldots,\beta_{Rm}. The detailed derivation of these Mueller matrices is provided in Appendix A. Together, the NN projection vectors a1,⋯ ,aN\mathbf{a}_1,\cdots,\mathbf{a}_N form the real N×4N \times4 analysis matrix A\mathbf{A}. The complete polarization projection is written as I(x,y)=AS(x,y)\mathbf{I}(x,y)=\mathbf{A}\mathbf{S}(x,y), where I={I1,⋯ ,IN}\mathbf{I}=\{I_1,\cdots,I_N\} is the set of detected intensity images. The Stokes vector field is linearly reconstructed as SR(x,y)=A+I(x,y)\mathbf{S}_R(x,y)=\mathbf{A}^{+}\mathbf{I}(x,y), where A+\mathbf{A}^{+} is the Moore–Penrose pseudoinverse of A\mathbf{A}. When N=4N=4, and A\mathbf{A} is nonsingular, A+=A−1\mathbf{A}^{+}=\mathbf{A}^{-1}. The pseudospin field and topological observables can be reconstructed from SR(x,y)\mathbf{S}_R(x,y).

Errors sources and polarization evaluating functions

Similar to conventional Stokes polarimetry, different stochastic error sources will arise at different stages of each measurement in FSPs. These error sources propagate through the nonlinear reconstruction chain, degrading polarization and topological observables to different degrees. Therefore, the high-precision FSP at the weak-intensity level requires modeling these error sources and defining suitable evaluating functions to quantify measurement errors and guide their optimization. We examine these stochastic error sources in detail below.

▸ Error Source 1 (Analysis matrix mismatch): As shown in Figure 2-(a), this error source occurs at the projection stage and arises from a systematic mismatch between the actual PSA analysis matrix Ar\mathbf{A}_r and the calibrated matrix Ac\mathbf{A}_c used for reconstruction. The potential causes include random positional offsets of optical elements, residual calibration errors, operating wavelength shifts, and possible mechanical deformations [37, 38]. The matrix mismatch remains fixed throughout each measurement. When error source 1 exists, the projection can be rewritten in the following form:

I(x,y)=Ar⋅SI(x,y)=(Ac+ΔA)⋅SI(x,y)(8)I(x,y)=\mathbf{A}_r\cdot\mathbf{S}_I(x,y)=(\mathbf{A}_c+\Delta\mathbf{A})\cdot\mathbf{S}_I(x,y) \tag*{(8)}

It should be emphasized that, since the analysis matrix is a complex function derived from Mueller calculus, the specific mismatch cannot simply be added or subtracted linearly. ΔA\Delta\mathbf{A} is used solely for conceptual description.

▶ Error Source 2 (Composite stochastic noise): This error source occurs at the reconstruction stage shown in Figure 2-(a). The detectors in arbitrary Stokes polarimetry inevitably suffer from various stochastic noise sources, such as thermal noise, dark noise, and shot noise, which follow different statistical distributions. The stochastic noises can be modeled as an additive term, δI(x,y)\delta I(x,y), to the projected intensity images. Then, the noise propagates through the nonlinear reconstruction chain and can be amplified in the reconstructed observables [39, 40, 41]. With error source 2 included, the reconstruction equation is rewritten as:

SR(x,y)=Ac+⋅[I(x,y)+δI(x,y)](9)\mathbf{S}_R(x,y)=\mathbf{A}_c^{+}\cdot\left[\mathbf{I}(x,y)+\delta\mathbf{I}(x,y)\right] \tag*{(9)}

Although some simplified models treat δI\delta I as Gaussian noise, we use a composite stochastic noise model, δI(x,y)=ng(x,y)+np(x,y)\delta I(x,y)=n_g(x,y)+n_p(x,y), that combines Gaussian noise with intensity-dependent Poisson noise to better match experimental situations. Substituting Eq. (8) into Eq. (9) can provide the reconstructed Stokes field: SR(x,y)=Ac+ArSI(x,y)+Ac+δI(x,y)\mathbf{S}_R(x,y)=\mathbf{A}_c^{+}\mathbf{A}_r\mathbf{S}_I(x,y)+\mathbf{A}_c^{+}\delta\mathbf{I}(x,y). Here, we further define the absolute Stokes error as ΔS(x,y)=SR−SI\Delta\mathbf{S}(x,y)=\mathbf{S}_R-\mathbf{S}_I, and then express the relative Stokes error using the Hilbert-Schmidt norm as ∥ΔS∥/∥SI∥\lVert\Delta\mathbf{S}\rVert/\lVert\mathbf{S}_I\rVert. Its supremum provides a global evaluation of the linear reconstruction quality of the Stokes field when both stochastic error sources exist. In order to relate this supremum to specific scalar evaluating functions, we introduce the triangle inequality and obtain the following inequality:

sup⁡(∥ΔS∥SI)≤∥B∥+∥Ac+∥⋅sup⁡(∥δI∥SI)(10)\sup\left(\frac{\lVert\Delta\mathbf{S}\rVert}{S_I}\right)\leq\lVert\mathbf{B}\rVert+\lVert\mathbf{A}_c^{+}\rVert\cdot\sup\left(\frac{\lVert\delta I\rVert}{S_I}\right) \tag*{(10)}

In Eq. (10), we define the 4×44\times4 matrix B=Ac+Ar−I4\mathbf{B}=\mathbf{A}_c^{+}\mathbf{A}_r-\mathbf{I}_4 to characterize the reconstruction error caused by Error Source 1. This equation relates the upper bound on the relative Stokes error to two separate metrics, rather than to a single metric of condition number (CN). The first metric, ∥B∥\lVert\mathbf{B}\rVert, describes the effect of error source 1 and remains fixed for each measurement. The second metric, ∥Ac+∥\lVert\mathbf{A}_c^{+}\rVert, describes the amplification of composite stochastic noise from Error Source 2 and depends only on the PSA configuration. Its square equals the equally weighted variance (EWV) introduced by Sabatke et al

[40, 42]. Therefore, we define two polarization evaluating functions (PEF), F1=∥B∥\mathcal{F}_1=\lVert\mathbf{B}\rVert and F2=∥Ac+∥\mathcal{F}_2=\lVert\mathbf{A}_c^{+}\rVert, which can be further expanded as follows:

F1=Tr⁡[B†B],F2=Tr⁡[(Ac+)†(Ac+)](11)\mathcal{F}_1=\sqrt{\operatorname{Tr}[\mathbf{B}^{\dagger}\mathbf{B}]},\quad\mathcal{F}_2=\sqrt{\operatorname{Tr}\left[(\mathbf{A}_c^{+})^{\dagger}(\mathbf{A}_c^{+})\right]} \tag*{(11)}

Topological evaluating functions

The PEFs F1\mathcal{F}_1 and F2\mathcal{F}_2 apply to both single-pixel and imaging Stokes polarimetry. They evaluate the linear reconstruction of the Stokes vector. However, FSP further requires the extraction of the topological density qsk(x,y)q_{\mathrm{sk}}(x,y) and the Skyrmion number NskN_{\mathrm{sk}}. These topological observables depend on the normalization of the pseudospin field n(x,y)\mathbf{n}(x,y), its spatial derivatives, and the definition of the effective integration region. The reconstruction quality of these observables cannot be adequately assessed based solely on the relative Stokes error and the PEFs. Therefore, this subsection introduces topological evaluating functions (TEF) to assess the reconstruction of these topological observables. Note that when the scale of the polarization vector vR\mathbf{v}_R approaches the noise level, the relevant integration regions must be evaluated separately. The principle is shown in Appendix B.

Ac+Ar=I4+B=(k00kTbC)(12)\mathbf{A}_c^{+}\mathbf{A}_r=\mathbf{I}_4+\mathbf{B}= \begin{pmatrix} k_{00} & \mathbf{k}^{T}\\ \mathbf{b} & \mathbf{C} \end{pmatrix} \tag*{(12)}

We first investigate how Error Source 1 degrades the reconstruction of topological observables. The reconstruction equation is written as SR(x,y)=Ac+ArSI(x,y)\mathbf{S}_R(x,y)=\mathbf{A}_c^{+}\mathbf{A}_r\mathbf{S}_I(x,y). Here, the matrix product Ac+Ar\mathbf{A}_c^{+}\mathbf{A}_r can be expressed in the block form shown in Eq. (12). C\mathbf{C} is a 3×33\times3 matrix describing the coupling among the three polarization components, and b\mathbf{b} is a three-component vector representing crosstalk from intensity into these components. Then, the reconstructed pseudospin field nR(x,y)\mathbf{n}_R(x,y) can be written as a spherical map in Eq. (13).

nR=CnI+b∥CnI+b∥(13)\mathbf{n}_R=\frac{\mathbf{C}\mathbf{n}_I+\mathbf{b}}{\lVert\mathbf{C}\mathbf{n}_I+\mathbf{b}\rVert} \tag*{(13)}

For each complete measurement, Eqs. (12) and (13) describe a nonlinear mapping from the incident pseudospin field nI(x,y)\mathbf{n}_I(x,y) to the reconstructed field nR(x,y)\mathbf{n}_R(x,y), as illustrated in Figure 3-(a). When C\mathbf{C} is invertible and CnI+b≠0\mathbf{C}\mathbf{n}_I+\mathbf{b}\ne0, the resulting distortion in topological density is given analytically by qskR(x,y)=g(nI)qskI(x,y)q_{\mathrm{sk}R}(x,y)=g(\mathbf{n}_I)q_{\mathrm{sk}I}(x,y), where the scaling factor g(nI)g(\mathbf{n}_I) is:

Effects of analysis matrix mismatch on pseudospin and topological observables

Figure 3. (a)–(c) Effects of analysis matrix mismatch (Error Source 1) on the reconstruction of the pseudospin and topological observables. (a) The incident pseudospin nI\mathbf{n}_{I} are mapped to the reconstructed pseudospin nR\mathbf{n}_{R} through the affine transformation CnI+b\mathbf{C}\mathbf{n}_{I}+\mathbf{b} followed by normalization. The surfaces show the distortion of the full set of pseudospins. (b) Radial profiles of the reconstructed topological density under anisotropic mismatch, with C=diag⁡(κ,κ,1)\mathbf{C}=\operatorname{diag}(\kappa,\kappa,1), b=0\mathbf{b}=0, and κ=0.7,1,1.4\kappa=0.7,1,1.4 (κ=1\kappa=1 corresponds to ideal reconstruction). (c) Reconstructed skyrmion number as a function of the normalized radius R=r/r0R=r/r_{0}, where all curves approach the full-field limitation of 1 (dashed line). (d) Dependence of F3\mathcal{F}_{3}, F4\mathcal{F}_{4}, and EnE_{n} on the noise correlation length, evaluated over a circular integration region of radius 4r04r_{0}, with the fixed 2% relative RMS perturbation of vR\mathbf{v}_{R}.

g(nI)=DET⁡(C)(1+nITC−1b)∥CnI+b∥3(14)g(\mathbf{n}_I)=\frac{\operatorname{DET}(\mathbf{C})\left(1+\mathbf{n}_I^{T}\mathbf{C}^{-1}\mathbf{b}\right)}{\lVert\mathbf{C}\mathbf{n}_I+\mathbf{b}\rVert^{3}} \tag*{(14)}

This equation establishes a direct connection between specific matrix mismatch and local topological density distortion. Its detailed derivation can be found in Appendix B. When C=aR\mathbf{C}=a\mathbf{R} (R∈SO(3)\mathbf{R}\in\mathrm{SO}(3)) and b=0\mathbf{b}=0, the scaling factor gg equals 1 (isotropic mismatch), and the uniform amplitude scaling and global rotation of the pseudospin leave the topological density unchanged. In other cases, arbitrary anisotropic mismatch will cause g(nI)g(\mathbf{n}_{I}) to vary with the pseudospin field, leading to spatially distributed distortions in qskR(x,y)q_{\mathrm{sk}R}(x,y).

However, due to topological protection, distortions in topological density do not equal the distortion of skyrmion number. For skyrmion fields that satisfy the compactification conditions [4], the spherical map in Eq. (13) retains a mapping degree of 1 when det⁡(C)>0\det(\mathbf{C})>0 and ∥C−1b∥<1\lVert\mathbf{C}^{-1}\mathbf{b}\rVert<1. In this case, the nR\mathbf{n}_{R} sphere in Figure 3(a) still encloses the origin and retains its orientation after the affine transformation CnR+b\mathbf{C}\mathbf{n}_{R}+\mathbf{b} and spherical mapping, so NskR=NskIN_{\mathrm{sk}R}=N_{\mathrm{sk}I}. Numerical simulations in Figure 3(b) show the radial distributions of the reconstructed topological density with different anisotropic mismatches. Figure 3(c) shows the evolution of reconstructed skyrmion numbers with the normalized integration radius. For all cases shown, the reconstructed skyrmion number approaches the ideal value of 1 as the integration region expands to cover the full field (full-field limit), which also matches the topological protection of skyrmions under appropriate boundary conditions [4, 43].

However, for a fixed integration window, matrix mismatch can still change the topological density distribution and introduce additional truncation errors in the reconstructed skyrmion number. Therefore, the metric of the skyrmion number alone is not enough to fully evaluate reconstruction quality, since it can miss distortions in local topological observables. Here, we define two new topological evaluating functions (TEF), F3\mathcal{F}_{3} and F4\mathcal{F}_{4}, to quantify the reconstruction quality of local and global topological observables, respectively.

F3=E{∬Ω[qskR(x,y)−qskI(x,y)]2dxdy}∬ΩqskI2(x,y)dxdy(15)\mathcal{F}_{3}=\sqrt{\frac{\mathbb{E}\left\{\iint_{\Omega}\left[q_{\mathrm{sk}R}(x,y)-q_{\mathrm{sk}I}(x,y)\right]^{2}\mathrm{d}x\mathrm{d}y\right\}}{\iint_{\Omega}q_{\mathrm{sk}I}^{2}(x,y)\mathrm{d}x\mathrm{d}y}} \tag*{(15)}
F4=E[(NskR−NskI)2](16)\mathcal{F}_{4}=\sqrt{\mathbb{E}\left[\left(N_{\mathrm{sk}R}-N_{\mathrm{sk}I}\right)^{2}\right]} \tag*{(16)}

E\mathbf{E} denotes the mathematical expectation, which generally covers the average influence of stochastic noise sources when the matrix mismatch is held constant. F3\mathcal{F}_{3} measures the relative RMS error in the local topological density, while F4\mathcal{F}_{4} measures the absolute RMS error in the skyrmion number over the same effective integration region. In numerical simulations, the incident and reconstructed skyrmion fields must be evaluated on the same sampling grid and over the same effective integration region to avoid introducing additional numerical errors.

Then, to relate these TEFs directly to the two error sources, we start from the Stokes reconstruction error ΔS=BSI+Ac+δI\Delta S = B S_I + A_{c}^{+}\delta I, which is derived from Eqs. (8) and (9). For a nonzero polarization vector vI\mathbf{v}_I, a first-order Taylor expansion of nI=vI/∥vI∥\mathbf{n}_I = \mathbf{v}_I / \lVert\mathbf{v}_I \rVert can provide δn=Pδv/∥vI∥+O(∣δv∣2/∥vI∥2)\delta\mathbf{n} = \mathbf{P}\delta\mathbf{v}/\lVert\mathbf{v}_I \rVert+ O(\lvert\delta\mathbf{v}\rvert^2/\lVert\mathbf{v}_I\rVert^2), where P=I3−nInIT\mathbf{P} = \mathbf{I}_3 - \mathbf{n}_I\mathbf{n}_I^T projects the perturbation onto the tangent plane of the nI\mathbf{n}_I sphere in Figure 3-(a). Thus, to first order, only the component of δv\delta\mathbf{v} perpendicular to nI\mathbf{n}_I changes the incident pseudospin, and this component is scaled by 1/∥vI∥1/\lVert\mathbf{v}_I\rVert. Further performing a first-order expansion of the topological density can provide:

δqsk=14π[δn⋅(∂n∂x×∂n∂y)+n⋅(∂δn∂x×∂n∂y)+n⋅(∂n∂x×∂δn∂y)](17)\delta q_{\mathrm{sk}} = \frac{1}{4\pi}\left[\delta\mathbf{n}\cdot\left(\frac{\partial\mathbf{n}}{\partial x}\times\frac{\partial\mathbf{n}}{\partial y}\right)+\mathbf{n}\cdot\left(\frac{\partial\delta\mathbf{n}}{\partial x}\times\frac{\partial\mathbf{n}}{\partial y}\right)+\mathbf{n}\cdot\left(\frac{\partial\mathbf{n}}{\partial x}\times\frac{\partial\delta\mathbf{n}}{\partial y}\right)\right] \tag*{(17)}
→14πn⋅[(∂δn∂x×∂n∂y)+(∂n∂x×∂δn∂y)].\rightarrow\frac{1}{4\pi}\mathbf{n}\cdot\left[\left(\frac{\partial\delta\mathbf{n}}{\partial x}\times\frac{\partial\mathbf{n}}{\partial y}\right)+\left(\frac{\partial\mathbf{n}}{\partial x}\times\frac{\partial\delta\mathbf{n}}{\partial y}\right)\right].

Here, the pseudospin perturbation satisfies n⋅δn=0\mathbf{n}\cdot\delta\mathbf{n}=0. Since ∂xn×∂yn\partial_x\mathbf{n}\times\partial_y\mathbf{n} is parallel to n\mathbf{n}, the first term vanishes. The remaining two terms show that the topological density error depends on the pseudospin field as well as the spatial derivatives of both the field and its perturbation. Thus, two measurements with nearly equal Stokes error scales can still yield substantially different topological errors, as measured by F3\mathcal{F}_3 and F4\mathcal{F}_4.

We now account for spatial sampling by the detector array. In practice, topological observables are reconstructed from a discrete grid of pixels. We stack the Stokes parameters at all pixels into a single column vector and define Jq\mathbf{J}_q as the Jacobian of the discrete topological density vector with respect to the Stokes vector. For an array of MM pixels, Jq\mathbf{J}_q is a real M×4MM\times4M matrix that combines the effects of normalization and spatial differentiation. We denote the corresponding full-array forms of B\mathbf{B}, Ac+\mathbf{A}_c^{+}, SI\mathbf{S}_I, and δI\delta\mathbf{I} by B\mathbb{B}, A\mathbb{A}, SI\mathbf{S}_I, and δI\delta\mathbb{I}, respectively. For weak perturbations, the error in the discrete topological density is then given by:

δq≈{δq1⋯δqM}=Jq(B⋅SI+A⋅δI)(18)\delta\mathbf{q}\approx\{\delta q_1\cdots\delta q_M\}=\mathbf{J}_q\left(\mathbb{B}\cdot\mathbf{S}_I+\mathbb{A}\cdot\delta\mathbb{I}\right) \tag*{(18)}

In Eq. (18), the two contributions to the topological density error arise from error sources 1 and 2, respectively. For a fixed matrix mismatch, assume that the detector noise has zero mean and covariance matrix ΣI\boldsymbol{\Sigma}_I. Taking the expectation and covariance of Eq. (18) can further provide the mean topological density error, μq=E(δq)≈JqB⋅SI\boldsymbol{\mu}_q=\mathbb{E}(\delta\mathbf{q})\approx\mathbf{J}_q\mathbb{B}\cdot\mathbf{S}_I, and its covariance matrix, Σq=Cov⁡(δq)≈(JqA)ΣI(JqA)T\boldsymbol{\Sigma}_q=\operatorname{Cov}(\delta\mathbf{q})\approx(\mathbf{J}_q\mathbb{A})\boldsymbol{\Sigma}_I(\mathbf{J}_q\mathbb{A})^T. To express the TEFs F3\mathcal{F}_3 and F4\mathcal{F}_4 in terms of these statistics, we introduce the area integration weights w=(w1,⋯ ,wM)T\mathbf{w}=(w_1,\cdots,w_M)^T and define W=diag⁡(w)\mathbf{W}=\operatorname{diag}(\mathbf{w}). In discrete form, the spatial integral of the squared topological density error is δqTWδq\delta\mathbf{q}^T\mathbf{W}\delta\mathbf{q}, while the error in the skyrmion number is wTδq\mathbf{w}^T\delta\mathbf{q}. Then, we write δq\delta\mathbf{q} as the sum of its mean and a zero-mean fluctuation. Substituting this decomposition into the discrete forms of Eqs. (15) and (16) and eliminating the cross terms can provide:

F32=μqTWμq+Tr⁡(W⋅Σq)qITWqI(19)\mathcal{F}_3^2=\frac{\boldsymbol{\mu}_q^T\mathbf{W}\boldsymbol{\mu}_q+\operatorname{Tr}(\mathbf{W}\cdot\boldsymbol{\Sigma}_q)}{\mathbf{q}_I^T\mathbf{W}\mathbf{q}_I} \tag*{(19)}
F42=(wTμq)2+wTΣqw(20)\mathcal{F}_4^2=(\mathbf{w}^T\boldsymbol{\mu}_q)^2+\mathbf{w}^T\boldsymbol{\Sigma}_q\mathbf{w} \tag*{(20)}

Substituting μq\boldsymbol{\mu}_q and Σq\boldsymbol{\Sigma}_q into these expressions allows us to evaluate TEFs using the analysis matrices, incident Stokes vectors, and noise covariances. Since W\mathbf{W} is diagonal, the variance part of F3\mathcal{F}_3 sums the local topological density variances, whereas that of F4\mathcal{F}_4 also includes covariances between different pixels. Note that, even though the detector noise is independent across pixels, these covariances must also be included because derivatives at neighboring pixels may use the same sampling points. Besides, global SO(3) rotations of the pseudospin field can change the texture type within the same skyrmionic family while keeping qskq_{\mathrm{sk}} and NskN_{\mathrm{sk}} constant, as shown in Figure 1. We introduce an additional PEF, the pseudospin error EnE_n, for convenience in the following analysis.

En=1ΩE[∬Ω∥nR(x,y)−nI(x,y)∥2 dxdy](21)E_n=\sqrt{\frac{1}{\Omega}\mathbb{E}\left[\iint_{\Omega}\lVert\mathbf{n}_R(x,y)-\mathbf{n}_I(x,y)\rVert^2\,\mathrm{d}x\mathrm{d}y\right]} \tag*{(21)}

EnE_n has a completely different meaning from {F3,F4}\{\mathcal{F}_3,\mathcal{F}_4\}. Figure 3-(d) shows the evolution of these three evaluating functions as a function of the spatial correlation length LcL_c at a fixed Stokes perturbation scale. The simulation uses a circular integration region of radius 4r04r_0, where r0=ω0∣A10∣/(2∣A±1∣)r_0=\omega_0\lvert A_{10}\rvert/(\sqrt{2}\lvert A_{\pm1}\rvert) is the incident texture scale. Here, LcL_c is the spatial correlation length of the effective Stokes perturbations (using the Gaussian correlation function ρ(d)=exp⁡[−d2/(2Lc2)]\rho(d)=\exp[-d^2/(2L_c^2)]), where LcL_c is defined as the distance at which the correlation coefficient falls to e−1/2e^{-1/2} [[44]]. As LcL_c increases at a fixed perturbation scale, EnE_n remains nearly constant, while F3\mathcal{F}_3 decreases and F4\mathcal{F}_4 increases. These different trends reflect how the three functions respond to spatial variations. The error EnE_n compares pseudospin directions pixel by pixel and depends on the local Stokes parameters and their perturbations. By contrast, F3\mathcal{F}_3 depends on the spatial derivatives of the pseudospin and its perturbation, while F4\mathcal{F}_4 further depends on the superposition of density errors from different points. These results show that changing the correlation length can produce different errors in topological observables, even though the Stokes perturbation scale is fixed. Therefore, EnE_n and {F3,F4}\{\mathcal{F}_3,\mathcal{F}_4\} provide complementary evaluations of reconstruction quality in FSP.

Therefore, we introduce a multi-stage optimization methodology for arbitrary FSP. The first part uses the PEF F2\mathcal{F}_2 to filter an optimal PSA configuration for Stokes reconstruction to reduce computational costs. This configuration then serves as the initial values for minimizing the TEF F3\mathcal{F}_3, with F4\mathcal{F}_4 and EnE_n used as additional evaluating functions. For multiple incident textures (e.g., a full skyrmionic family), a weighted average of the evaluating functions over the sampled textures should be defined. This framework connects conventional Stokes polarimetry optimization to the topological observables. The specific FSP optimization cases and error verification will be discussed in Section 4.

Configuration Optimization

This section investigates whether the quality of topological reconstruction can be further improved after polarization optimization and evaluates the potential benefits of increasing the projection numbers in redundant measurements.

Multi-stage optimization

As mentioned above, the multi-stage optimization generates an optimal configuration PL\mathbf{P}_L for polarization measurement, followed by an optimal configuration PT\mathbf{P}_T for topological measurement. Considering a conventional biplate PSA with two adjustable azimuths {βR,βP}\{\beta_R,\beta_P\}. When the projection numbers are NN, both PL\mathbf{P}_L and PT\mathbf{P}_T are N×2N \times2 matrices in the form of {βq(1),βp(1);⋯ ;βq(N),βp(N)}\{\beta_q^{(1)},\beta_p^{(1)};\cdots;\beta_q^{(N)},\beta_p^{(N)}\}. For the stage of polarization optimization, we combine Monte-Carlo sampling with the gradient descent method [45], sample 100 candidate configurations in the 2N2N-dimensional parameter space first, and select the one with the lowest F2\mathcal{F}_2 as the starting configuration P0\mathbf{P}_0 (sampling is repeated if F2<20\mathcal{F}_2 < 20). Then, starting from P0\mathbf{P}_0, we optimize the PEF, F2\mathcal{F}_2, to a minimum to obtain the configuration PL\mathbf{P}_L.

Here, we consider the four-projection case with N=4N = 4 and two common redundant measurement cases with N=6N = 6 and 10. Figure 4-(b) shows the distributions of F2\mathcal{F}_2 obtained by Monte-Carlo sampling, from which the initial configurations P0\mathbf{P}_0 are selected. These distributions verify that increasing the projection numbers makes it easier to find configurations with low noise amplification, which means measurement redundancy offers an advantage over four-projection measurements for high-precision FSP. Then, as shown in Figure 4-(c), about 100 iterations of gradient descent starting from P0\mathbf{P}_0 generate the optimal configuration PL\mathbf{P}_L for polarization reconstruction. The F2\mathcal{F}_2 decreases further to 4.485, 3.665, and 2.837 for N=4N = 4, 6, and 10, respectively, approaching the corresponding theoretical lower bounds of this model. Then, we perform topological optimization by minimizing TEF, F3\mathcal{F}_3, through gradient descent to obtain PT\mathbf{P}_T. The TEFs are evaluated as weighted averages over a sampled full skyrmionic family [46], as shown in Figure 4-(a), with a unit level of composite stochastic noise. The optimization stops when the relative improvement ΔF3/F3\Delta\mathcal{F}_3/\mathcal{F}_3 is below 10−510^{-5} for 100 iterations or when the iteration count exceeds 30000.

Sampling, optimization, and evaluating-function plots for full-skyrmionic polarimetry

Figure 4. (a) Sampling of a full skyrmionic family, where 60 STF flagpole directions are sampled along a spiral, with four flag orientations at each direction, providing 240 sample points in total. (b) Monte-Carlo sampling of PSA configurations, where blue, orange, and green data points and box plots correspond to N=4N = 4, 6, and 10, respectively. (c) The PEF F2\mathcal{F}_2 and (d) the TEFs F3\mathcal{F}_3 (solid lines) and F4\mathcal{F}_4 (dashed lines) during multi-stage optimization for the three projection numbers. (e) and (f) The evaluating functions for the configuration PL\mathbf{P}_{L} (dashed lines) and the topologically optimal configuration PT\mathbf{P}_{T} (solid lines) with composite stochastic noise alone. (g) and (h) The evaluating functions at PT\mathbf{P}_{T} as a function of projection number. Blue, black, and red data points correspond to βm=1∘\beta_m = 1^\circ, 4∘4^\circ, and 8∘8^\circ, respectively. The curves are fits to the data points.

Figure 4-(c) and (d) show that although PL\mathbf{P}_L is already optimal for polarization measurements, further topological optimization to PT\mathbf{P}_T still reduces F3\mathcal{F}_3 and F4\mathcal{F}_4 by 5.4 ∼\sim 7.8% and 6.6 ∼\sim 8.5%, respectively, with a small increase of 1.4 ∼\sim 3.9% in F2\mathcal{F}_2, which reflects that topological optimization can trade a small increase in Stokes parameter error for improved topological reconstruction.

To test whether the benefits of topological optimization extend beyond the unit noise level, Figure 4-(e) and (f) simulate the responses of configurations PL\mathbf{P}_L and PT\mathbf{P}_T to composite stochastic noise alone, where the composite noise source is modeled as δI(x,y)=ng+np=η[(K−I)+ϵ]\delta I(x,y) = n_g + n_p = \eta[(K-I)+\epsilon], with K∼Poisson⁡(I)K \sim\operatorname{Poisson}(I) and ϵ∼N(0,32)\epsilon\sim\mathcal{N}(0,3^2). The amplitude factor η=0\eta= 0 corresponds to a noise-free measurement, while η=1\eta= 1 corresponds to the measurement with a unit noise level. For each incident texture, 128 complete simulated measurements are performed. In addition to EnE_n, F3\mathcal{F}_3, and F4\mathcal{F}_4, the measurement results are also assessed by defining ES={E[∬∥SR−SI∥2dxdy/∬∥SI∥2dxdy]}1/2E_S = \{\mathbb{E}[\iint\lVert S_R-S_I\rVert^2 dxdy/\iint\lVert S_I\rVert^2 dxdy]\}^{1/2}, which directly quantifies the reconstruction error of the Stokes parameters. Figure 4-(e) shows that ESE_S and EnE_n increase approximately linearly with noise amplitude, whereas the topological errors F3\mathcal{F}_3 and F4\mathcal{F}_4 in Figure 4-(f) grow more rapidly. As η\eta increases from 2 to 4, ESE_S and EnE_n approximately double, while F3\mathcal{F}_3 and F4\mathcal{F}_4 increase fourfold. This behavior suggests that higher-order error contributions gradually become significant as the noise level continuously increases. Besides, The benefits of topological optimization are most obvious in the conventional four-projection case. Compared with PL\mathbf{P}_L, PT\mathbf{P}_T reduces F3\mathcal{F}_3 and F4\mathcal{F}_4 by 6.3% and 7.0%, respectively, while increasing ESE_S by only 0.2%. As NN increases beyond four, the reconstruction errors at a given noise level decrease, and the performance difference between PL\mathbf{P}_L and PT\mathbf{P}_T becomes smaller. These results further highlight the value of measurement redundancy for high-precision FSP.

Projection redundancy

As introduced in Figure 2, DOT-FSP performs polarization projections sequentially in time, allowing a large number of projections NN at a low hardware cost, at the expense of temporal resolution. The Monte-Carlo sampling results and simulations with stochastic noise alone have shown that redundant projections improve measurement stability and reduce the effects of Error Source 2. Next, we investigate whether projection redundancy also reduces Error Source 1 caused by positional offsets of optical plates.

With error source 2 excluded, we perform multi-stage optimization for each projection number N=5,…,16N = 5,\ldots,16, obtaining 12 topologically optimal configurations PT\mathbf{P}_T. In each projection, the QWR and LP are evaluated independent angular positional offset Δβ∈[−βm,βm]\Delta\beta\in[-\beta_m,\beta_m], with βm=1∘\beta_m = 1^\circ, 4∘4^\circ, or 8∘8^\circ. For each combination of NN and βm\beta_m, we generate 512 perturbed configuration matrices PT′\mathbf{P}'_{T} and simulate the corresponding measurements. Each PT′\mathbf{P}'_{T} contains 2N2N independent positional offset terms and produces a pseudospin field distortion shown in Figure 3-(a) and a topological density distortion described by Eq. (14). The final evaluating functions are calculated from these 512 measurements. In Figure 4-(g) and (h), the solid lines are smooth fits to the 13 simulated data points in each series, including the standard case of N=4N = 4. All four evaluating functions, ESE_S, EnE_n, F3\mathcal{F}_3, and F4\mathcal{F}_4, show an overall decrease as the projection numbers increase. Increasing NN from 4 to 16 reduces these metrics by approximately half at all three offset levels. For instance, at βm=4∘\beta_m = 4^\circ, F3\mathcal{F}_3 decreases from 0.1578 to 0.0785, and F4\mathcal{F}_4 decreases from 0.00754 to 0.00373. These significant improvements stem from the dispersion of error source 1 across a greater number of independent projections.

The above results indicate that multi-stage optimization can further improve the reconstruction accuracy and stability of topological observables, even after the optimal configuration with polarization reconstruction has been established. Furthermore, in the case of projection redundancy, increasing projection numbers also provides a practical way to reduce the effects of both random matrix mismatch (Error Source 1) and stochastic noise (Error Source 2), which benefits the reconstruction of both polarization and topological observables.

Discussion and Conclusion

we define full-skyrmionic polarimetry (FSP) for measuring the complete skyrmionic characteristics (global and local) of skyrmionic beams, and develop its optimization framework from the reconstruction chain of both polarization and topological observables. Based on the stochastic error source models and polarization evaluating functions (PEF), {F1,F2}\{\mathcal{F}_1,\mathcal{F}_2\}, we introduce two key topological evaluating functions (TEF), {F3,F4}\{\mathcal{F}_3,\mathcal{F}_4\}, and an extra PEF, EnE_n, which provide effective metrics for quantitatively evaluating the measurement quality of FSPs (analogous to the condition number, CN).

The presented theory and the numerical results in Figure 3 demonstrate that the topological protection of skyrmions does not ensure the immunity of topological observations against stochastic error sources. The stochastic error sources can distort the reconstructed local pseudospin field and topological density, introducing skyrmion number errors within a finite integration window. Besides, PEFs based on Stokes parameter perturbations are insufficient for evaluating the reconstructed topological observables. The normalization and spatial differentiation of the pseudospin field n(x,y)\boldsymbol{n}(x,y) may lead to significantly different {F3,F4,En}\{\mathcal{F}_3,\mathcal{F}_4,E_n\} distributions, even when the Stokes parameter perturbations maintain the same scale. Therefore, we also develop a multi-stage optimization method, where polarization optimization is employed to define an optimal configuration PLP_{\mathrm{L}} for polarization reconstruction first, and topological optimization is used to further determine another optimal configuration PTP_{\mathrm{T}} for topological density reconstruction. As shown in Figure 4, this additional step improves topological reconstruction even after the configuration has reached the optimum for polarization observables.

The simulations also demonstrate that for N≥4N \ge4, projection redundancy offers a convenient way to improve measurement quality. Increasing the projection numbers reduces the effects of both error sources 1 and 2 on the reconstruction of full-skyrmionic observables. This stems from the averaging of error sources across redundant projections and is of critical significance for the division-of-time FSP (DOS-FSP), which allows for a large-scale increase in the number of redundant projections at a low cost to improve measurement quality. Future research could also incorporate automatic PSA control to advance the application of the FSP optimization framework for high-precision quasi-particle field measurements and potential skyrmion ellipsometry at weak-intensity levels.

Data Availability

The author confirms that the data supporting this study are available within the article.

Acknowledgments

The author gratefully acknowledges the valuable discussions and suggestions provided by all co-authors during the development of this work.

Mueller calculus for MP-PSA

This section derives and expands Eq. (7), describing the polarization modulation of MP-PSA within the framework of Mueller calculus. Using the standard order of Stokes parameters I→Q→U→VI \to Q \to U \to V, the differential Mueller matrix of an independent polarization optical element (retarder, linear polarizer, beam splitter, or nanowire-grid) can be written as OMβ=0OT\mathbf{O}\mathbf{M}_{\beta=0}\mathbf{O}^{T}. Here, Mβ=0\mathbf{M}_{\beta=0} is the Mueller matrix when the major axis is aligned with the X-axis. The orthogonal matrix O(β)\mathbf{O}(\beta) describes the SO(3) rotation of the reference frame and is given by Eq. (22).

O(β)=(10000cos⁡2β−sin⁡2β00sin⁡2βcos⁡2β00001)(22)\mathbf{O}(\beta)= \begin{pmatrix} 1 & 0 & 0 & 0\\ 0 & \cos2\beta& -\sin2\beta& 0\\ 0 & \sin2\beta& \cos2\beta& 0\\ 0 & 0 & 0 & 1 \end{pmatrix} \tag*{(22)}

The same form also applies to other elements with equal or spatially varying principal axes, such as q-plates, J-plates, spiral phase plates, and acousto-optic or electro-optic crystals. The above coefficient 2 originates from a double covering of SO(3) by SU(2). For Figure 3-(b), the MP-PSA consists of phase retarders (PR) and linear polarizers (LP). The PR is described by the phase retardance δ\delta between the polarization components along the major and minor axes, and the isotropic transmittance TT. And the LP is described by the transmittances T1T_{1} and T2T_{2} for these two components, respectively. Their Mueller matrices at zero angular offset, Mβ=0\mathbf{M}_{\beta=0}, are provided by:

(T0000T0000TCδ−TSδ00TSδTCδ)(AB00BA0000C0000C)(23)\begin{pmatrix} T & 0 & 0 & 0\\ 0 & T & 0 & 0\\ 0 & 0 & T C_{\delta} & -T S_{\delta}\\ 0 & 0 & T S_{\delta} & T C_{\delta} \end{pmatrix} \begin{pmatrix} A & B & 0 & 0\\ B & A & 0 & 0\\ 0 & 0 & C & 0\\ 0 & 0 & 0 & C \tag*{(23)} \end{pmatrix}

For simplification, we define the relationships A=(T1+T2)/2A=(T_{1}+T_{2})/2, B=(T1−T2)/2B=(T_{1}-T_{2})/2, C=T1T2C=\sqrt{T_{1}T_{2}}, sa=sin⁡as_{a}=\sin a, and ca=cos⁡ac_{a}=\cos a. We first consider the phase retarder, PR. Substituting the left-side matrix in Eq. (23) into the decomposition expression OMβ=0OT\mathbf{O}\mathbf{M}_{\beta=0}\mathbf{O}^{T} and simplifying provides an expanded form:

MR(δ,β,T)=T(10000s2β2cδ+c2β2−sβc2β(cδ−1)s2βsδ0sβc2β(cδ−1)c2β2cδ+s2β2−c2βsδ0−s2βsδc2βsδcδ)(24)\mathbf{M}_{R}(\delta,\beta,T)=T \begin{pmatrix} 1 & 0 & 0 & 0\\ 0 & s_{2\beta}^{2}c_{\delta}+c_{2\beta}^{2} & -s_{\beta}c_{2\beta}(c_{\delta}-1) & s_{2\beta}s_{\delta}\\ 0 & s_{\beta}c_{2\beta}(c_{\delta}-1) & c_{2\beta}^{2}c_{\delta}+s_{2\beta}^{2} & -c_{2\beta}s_{\delta}\\ 0 & -s_{2\beta}s_{\delta} & c_{2\beta}s_{\delta} & c_{\delta} \end{pmatrix} \tag*{(24)}

Then, we consider the linear polarizers, LP. Substituting the left-side matrix in Eq. (23) into the decomposition expression similarly and simplifying provides another expanded form:

MP(β,T1,T2)=(ABc2βBs2β0Bc2βc2β2+Ac2βs2βc2β(A−C)0Bc2βc2βc2β(A−C)Cc2β2+As2β00000)(25)\mathbf{M}_{P}(\beta,T_{1},T_{2})= \begin{pmatrix} A & Bc_{2\beta} & Bs_{2\beta} & 0\\ Bc_{2\beta} & c_{2\beta}^{2}+Ac_{2\beta} & s_{2\beta}c_{2\beta}(A-C) & 0\\ Bc_{2\beta} & c_{2\beta}c_{2\beta}(A-C) & Cc_{2\beta}^{2}+As_{2\beta} & 0\\ 0 & 0 & 0 & 0 \end{pmatrix} \tag*{(25)}

Following the Mueller matrix multiplication rule M=Mm⋯M1\mathbf{M}=\mathbf{M}_{m}\cdots\mathbf{M}_{1}, the total Mueller matrix Mi\mathbf{M}_{i} for the ith polarization projection of the MP-PSA takes the form provided in Eq. (7). Its explicit form is derived by substituting Eqs. (24) and (A4) into Eq. (7).

Topological density distortion

The scaling factor aa in Eq. (13) describes the distortion in topological density caused by random matrix mismatch (Error source 1). To theoretically derive it, we first consider the normalization of a nonzero polarization vector v={S1,S2,S3}\mathbf{v} = \{S_1, S_2, S_3\}. The normalized pseudospin is n=v/∥v∥\mathbf{n} = \mathbf{v}/\lVert\mathbf{v}\rVert. Differentiating this equation can provide:

∂n=I3−nnT∥v∥∂v(26)\partial\mathbf{n} = \frac{I_3-\mathbf{n}\mathbf{n}^{T}}{\lVert\mathbf{v}\rVert}\partial\mathbf{v} \tag*{(26)}

Here, ∂v\partial\mathbf{v} denotes a small perturbation of the Stokes parameters. The operator (I3−nnT)(I_3-\mathbf{n}\mathbf{n}^{T}) projects this perturbation onto the tangent plane of the pseudospin sphere in Figure 3-(a). Thus, only the component perpendicular to n\mathbf{n} changes the pseudospin direction, and its contribution is scaled by 1/∥v∥1/\lVert\mathbf{v}\rVert. When ∥vR∥\lVert\mathbf{v}_R\rVert approaches the noise level, the reconstructed pseudospin direction becomes highly sensitive to small perturbations. At vR=0\mathbf{v}_R=0, the normalized pseudospin nR\mathbf{n}_R is undefined. In practice, the valid reconstruction region should be determined based on the signal-to-noise ratio of vR\mathbf{v}_R. This region should be used for the topological integrals of both the incident and reconstructed fields, as well as for TEF evaluation across different PSA configurations.

Next, we consider random matrix mismatch. For each complete projection-reconstruction, the matrix C\mathbf{C} and vector b\mathbf{b} on the left-side of Eq. (12) take random values that remain constant across the propagation plane. The reconstructed polarization vector is therefore vR(x,y)=CnI(x,y)+b\mathbf{v}_R(x,y)=\mathbf{C}\mathbf{n}_I(x,y)+\mathbf{b}, and the reconstructed pseudospin on the right-side of Eq. (12) is nR=vR/∥vR∥\mathbf{n}_R=\mathbf{v}_R/\lVert\mathbf{v}_R\rVert. By adjusting the notations and substituting the above relationships into Eq. (26), the following expression can be derived:

∂x,ynR=I3−nRnRT∥vR∥∂x,yvR=∂x,yvR∥vR∥−vR⋅(vR∂x,yvR)∥vR∥3=∂x,yvR∥vR∥−vR⋅∂x,y∥vR∥∥vR∥2(27)\partial_{x,y}\mathbf{n}_R = \frac{I_3-\mathbf{n}_R\mathbf{n}_R^{T}}{\lVert\mathbf{v}_R\rVert}\partial_{x,y}\mathbf{v}_R = \frac{\partial_{x,y}\mathbf{v}_R}{\lVert\mathbf{v}_R\rVert} -\frac{\mathbf{v}_R\cdot(\mathbf{v}_R\partial_{x,y}\mathbf{v}_R)}{\lVert\mathbf{v}_R\rVert^3} = \frac{\partial_{x,y}\mathbf{v}_R}{\lVert\mathbf{v}_R\rVert} -\frac{\mathbf{v}_R\cdot\partial_{x,y}\lVert\mathbf{v}_R\rVert}{\lVert\mathbf{v}_R\rVert^2} \tag*{(27)}

Then, substituting Eq. (27) into the definition of topological density in Eq. (5) and eliminating zero terms can further give:

ρsk=14πnR⋅(∂xnR×∂ynR)=vR⋅(∂xvR×∂yvR)4π∥vR∥3(28)\rho_{sk}=\frac{1}{4\pi}\mathbf{n}_R\cdot(\partial_x\mathbf{n}_R\times\partial_y\mathbf{n}_R) =\frac{\mathbf{v}_R\cdot(\partial_x\mathbf{v}_R\times\partial_y\mathbf{v}_R)}{4\pi\lVert\mathbf{v}_R\rVert^3} \tag*{(28)}

The incident pseudospin field nI(x,y)\mathbf{n}_I(x,y) satisfies ∥nI∥=1\lVert\mathbf{n}_I\rVert=1. Differentiating its squared norm with respect to xx and yy can give nI⋅∂xnI=nI⋅∂ynI=0\mathbf{n}_I\cdot\partial_x\mathbf{n}_I=\mathbf{n}_I\cdot\partial_y\mathbf{n}_I=0. Therefore, both derivatives lie in the tangent plane of the reconstructed pseudospin sphere (nI\mathbf{n}_I) in Figure 3-(a). Their cross product is normal to this plane and can be written as a scalar multiple of nI\mathbf{n}_I. The coefficient is nI⋅(∂xnI×∂ynI)\mathbf{n}_I\cdot(\partial_x\mathbf{n}_I\times\partial_y\mathbf{n}_I), which equals 4πqskI4\pi q_{skI} by Eq. (9). Hence:

∂xnI×∂ynI=[nI⋅(∂xnI×∂ynI)]nI=4πqskInI(29)\partial_x\mathbf{n}_I\times\partial_y\mathbf{n}_I =\left[\mathbf{n}_I\cdot(\partial_x\mathbf{n}_I\times\partial_y\mathbf{n}_I)\right]\mathbf{n}_I =4\pi q_{skI}\mathbf{n}_I \tag*{(29)}

Since C\mathbf{C} and b\mathbf{b} are independent of the spatial coordinates (x,y)(x,y), the partial derivative of the vector v\mathbf{v} is given by ∂x,yv=C∂x,yn\partial_{x,y}\mathbf{v}=\mathbf{C}\partial_{x,y}\mathbf{n}. Then, we introduce the scalar triple-product identity (Ce1)⋅[(Ce2)×(Ce3)]=det⁡(C)[e1⋅(e2×e3)](\mathbf{C}\mathbf{e}_1)\cdot[(\mathbf{C}\mathbf{e}_2)\times(\mathbf{C}\mathbf{e}_3)]=\det(\mathbf{C})[\mathbf{e}_1\cdot(\mathbf{e}_2\times\mathbf{e}_3)]. Applying it together with Eq. (29) to the numerator of Eq. (28) can further provide:

vR(∂xvR×∂yvR)=C(nI+C−1b)[(C∂xnI)×(C∂ynI)]=DET(C)(nI+C−1b)(∂xnI×∂ynI)=4πqskIDET(C)(1+nITC−1b)(30)\begin{aligned} \mathbf{v}_R(\partial_x\mathbf{v}_R\times\partial_y\mathbf{v}_R) &=\mathbf{C}(\mathbf{n}_I+\mathbf{C}^{-1}\mathbf{b})\left[(\mathbf{C}\partial_x\mathbf{n}_I)\times(\mathbf{C}\partial_y\mathbf{n}_I)\right]\\ &=\mathbf{DET}(\mathbf{C})(\mathbf{n}_I+\mathbf{C}^{-1}\mathbf{b})(\partial_x\mathbf{n}_I\times\partial_y\mathbf{n}_I)\\ &=4\pi q_{skI}\mathbf{DET}(\mathbf{C})(1+\mathbf{n}_I^{T}\mathbf{C}^{-1}\mathbf{b}) \tag*{(30)} \end{aligned}

Finally, substituting Eq. (30) into Eq. (28) and using vR=CnI+b\mathbf{v}_R=\mathbf{C}\mathbf{n}_I+\mathbf{b} can give the mapping from the incident topological density qskI(x,y)q_{skI}(x,y) to the reconstructed topological density qskR(x,y)q_{skR}(x,y) for a given matrix mismatch:

qskR(x,y)=DET(C)(1+nITC−1b)∥CnI+b∥3qskI(x,y)(31)q_{skR}(x,y)=\frac{\mathbf{DET}(\mathbf{C})(1+\mathbf{n}_I^{T}\mathbf{C}^{-1}\mathbf{b})}{\lVert\mathbf{C}\mathbf{n}_I+\mathbf{b}\rVert^3}q_{skI}(x,y) \tag*{(31)}

Eq. (31) provides the scaling factor g(nI)g(\mathbf{n}_I) in Eq. (13). The factor det⁡(C)\det(\mathbf{C}) comes from the scaling of the scalar triple product. The term containing b\mathbf{b} accounts for the center shift of the transformed pseudospin sphere in Figure 3-(a), while the denominator arises from pseudospin renormalization. These three contributions together determine the distortion of the topological density.

References

  1. [1]P. Ornelas, I. Nape, R. de Mello Koch, and A. Forbes, Nature Photonics 18, 258 (2024).
  2. [2]A. Kam, S. T esses, L. Fridman, Y. Ilin, A. Sivan, G. Sayer, S. Lotan, K. Cohen, A. Shaham, L. Nemirovsky-Levy, L. Popilevsky, A. Karnieli, M. Orenstein, M. Segev, and G. Bartal, eLight 6, 13 (2026).
  3. [3]C. Peters, V. Hakobyan, A. Drozdov, E. Brasselet, M. Cox, and A. Forbes, Science Advances 12, eaee2671 (2026).
  4. [4]A. A. Wang, Z. Zhao, Y. Ma, Y. Cai, R. Zhang, X. Shang, Y. Zhang, J. Qin, Z.-K. Pong, T. Marozsák, B. Chen, H. He, L. Luo, M. J. Booth, S. J. Elston, S. M. Morris, and C. He, Light: Science & Applications 13, 314 (2024).
  5. [5]Z. Guo, C. Peters, N. Mata-Cervera, A. N. Vetlugin, R. Guo, P. Zhang, A. Forbes, and Y. Shen, Nature Com- munications 17, 2085 (2026).
  6. [6]J. Ma, J. Yang, S. Liu, B. Chen, X. Li, C. Song, G. Qiu, K. Zou, X. Hu, F. Li, Y. Yu, and J. Liu, Nature Physics 21, 1462 (2025).
  7. [7]X. Liu, Y. Kan, S. Kumar, L. F. Kulikova, V. A. Davydov, V. N. Agafonov, and S. I. Bozhevolnyi, Nature Communications 17, 8567 (2026).
  8. [8]C. Mitra, C. S. Madasu, L. Gabardos, C. C. Kwong, Y. Shen, J. Ruostekoski, and D. Wilkowski, APL Photonics 10, 046113 (2025).
  9. [9]L. Bo, J. Chen, X. Zhang, Y. Zhou, C. Qiu, and M. Mochizuki, Physical Review Letters 137, 126701 (2026).
  10. [10]Y. Shen, H. Wang, and S. Fan, Advances in Optics and Photonics 17, 295 (2025).
  11. [11]A. Srinivasa Rao, Journal of the Optical Society of America A 41, 1059 (2024).
  12. [12]C. Cisowski, C. Ross, and S. Franke-Arnold, Advanced Photonics Research 4, 2200350 (2023).
  13. [13]Z. Ye, S. M. Barnett, S. Franke-Arnold, J. B. Götte, A. McWilliam, F. C. Speirits, and C. M. Cisowski, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences 480, 20240109 (2024).
  14. [14]C. Cheng, L. Rao, J. Ye, X. Zhao, Z. Che, W. Liu, J. Wang, and L. Shi, Advances in Optics and Photonics 18, 1 (2026).
  15. [15]T. He, Y. Meng, L. Wang, H. Zhong, N. Mata-Cervera, D. Li, P. Yan, Q. Liu, Y. Shen, and Q. Xiao, Nature Communications 15, 10141 (2024).
  16. [16]S. Saito, Communications Physics 8, 436 (2025).
  17. [17]Y. Shen, E. C. Martínez, and C. Rosales-Guzmán, ACS Photonics 9, 296 (2022).
  18. [18]P. Guo, Y. Cao, Z. Feng, P. Xian, and S. Wang, Optics Letters 50, 6678 (2025).
  19. [19]M. R. Foreman, A. Favaro, and A. Aiello, Physical Review Letters 115, 263901 (2015).
  20. [20]J. P. Balthasar Mueller, K. Leosson, and F. Capasso, Optica 3, 42 (2016).
  21. [21]R. A. Chipman, W.-S. T. Lam, and G. Young, Polarized Light and Optical Systems, 1st ed. (CRC Press, Boca Raton, FL, 2018).DOI
  22. [22]M. A. Al Khafaji, C. M. Cisowski, H. Jimbrown, S. Croke, S. Pádua, and S. Franke-Arnold, Optics Express 30, 22396 (2022).
  23. [23]H. Zhang, C. Gao, and S. Fu, Optics Letters 50, 2840 (2025).
  24. [24]Z. Yang, W. Ji, W. Yan, Y. Zhang, H. Zhang, and J. Ding, Optics Letters 51, 4284 (2026).
  25. [25]S. Gao, F. C. Speirits, F. Castellucci, S. Franke-Arnold, S. M. Barnett, and J. B. Götte, Physical Review A 102, 053513 (2020).
  26. [26]K. Y. Bliokh and F. Nori, Physics Reports 592, 1 (2015).
  27. [27]Y. Shen, Q. Zhang, P. Shi, L. Du, X. Yuan, and A. V. Zayats, Nature Photonics 18, 15 (2024).
  28. [28]A. Z. Goldberg, P. de la Hoz, G. Björk, A. B. Klimov, M. Grassl, G. Leuchs, and L. L. Sánchez-Soto, Advances in Optics and Photonics 13, 1 (2021).
  29. [29]T. Bauer, M. Neugebauer, G. Leuchs, and P. Banzer, Physical Review Letters 117, 013601 (2016).
  30. [30]N. Mata-Cervera, D. K. Sharma, Y. Shen, R. Paniagua-Dominguez, and M. A. Porras, Physical Review Letters 135, 033805 (2025).
  31. [31]S. Wang, Z. Zhou, Z. Zheng, J. Sun, H. Cao, S. Song, Z.-L. Deng, F. Qin, Y. Cao, and X. Li, Physical Review Letters 133, 073802 (2024).
  32. [32]H. Wu, W. Zhou, Z. Zhu, and Y. Shen, APL Photonics 10, 050804 (2025).
  33. [33]A. Yang, A. Kong, F. Meng, X. Chen, M. Lin, P. Shi, L. Du, X. Yuan, and B. Wang, Journal of Optics 27, 043002 (2025).
  34. [34]J. Dong and H. Zhou, Optics Communications 465, 125598 (2020).
  35. [35]H. Teng, J. Zhong, J. Chen, X. Lei, and Q. Zhan, Photonics Research 11, 2042 (2023).
  36. [36]R. de Mello Koch, B.-Q. Lu, P. Ornelas, I. Nape, and A. Forbes, APL Quantum 2, 026126 (2025).
  37. [37]J. C. Suárez-Bermejo, J. C. González de Sande, M. Santarsiero, and G. Piquero, Optics and Lasers in Engineering 122, 134 (2019).
  38. [38]J. Wu, Y. Li, T. Ning, C. Long, and G. Zhou, Applied Optics 61, 7490 (2022).
  39. [39]F. Goudal and M. Boffety, Journal of the Optical Society of America A 33, 9 (2016).
  40. [40]F. Goudal, Optics Letters 41, 5772 (2016).
  41. [41]T. Mu, D. Bao, F. Han, Y. Sun, Z. Chen, Q. Tang, and C. Zhang, Optics Express 27, 23009 (2019).
  42. [42]D. S. Sabatke, M. R. Descour, E. L. Dereniak, W. C. Sweatt, S. A. Kemmе, and G. S. Phipps, Optics Letters 25, 802 (2000).
  43. [43]A. A. Wang, Y. Ma, Z. Zhao, Y. Cai, S. M. Morris, H. He, Z. Xie, P. Shi, Y. Shen, A. V. Zayats, X. Yuan, and C. He, Nature Communications 17, 8539 (2026).
  44. [44]C. E. Rasmussen and C. K. I. Williams, Gaussian Processes for Machine Learning (The MIT Press, Cambridge, MA, 2006).DOI
  45. [45]L. Wang, Y. Peng, H. Zhang, and C. Zhao, Optics Letters 50, 293 (2025).
  46. [46]D. Lara and C. Paterson, Optics Express 17, 21240 (2009).

Paper details

vlnc:W_wxtzr69v
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents