betaFeedback

WorksPhysics and Astronomy

Multiple Photon Field-induced Topological States in Bulk HgTe

Abstract

Strong light-matter interactions can be exploited to modify properties of quantum materials both in and out of thermal equilibrium. Recent studies suggest electromagnetic fields in photonic structures can hybridize with condensed matter systems, resulting in photon field-dressed collective quantum states such as charge density waves, superconductivity, and ferroelectricity. Here, we show that photon fields in photonic structures, including optical cavities and waveguides, induce emergent topological phases in solids through polarization-mediated symmetry-breaking mechanisms. Using state-of-the-art quantum electrodynamic density functional theory (QEDFT) calculations, we demonstrate that strong light-matter coupling can reconfigure both the electronic and ionic structures of HgTe, driving the system into Weyl, nodal-line, or topological insulator phases. These phases depend on the relative orientation of the sample in the photonic structures, as well as the coupling strength. Unlike previously reported laser-driven phenomena with ultrashort lifetimes, the photon field-induced symmetry breaking arises from steady-state photon-matter hybridization, enabling multiple robust topological states to emerge. Our study demonstrates that vacuum fluctuations in photonic structures can be used to engineer material properties and realize rich topological phenomena in quantum materials on demand.

Introduction

Light-matter interactions, induced by laser pulses and confined photon fields, have been highlighted as a tool for controlling the structural and electronic properties of quantum materials, resulting in the emergence of superconductivity, topological phase transition, and ferroelectric transition [1, 2, 3, 4, 5, 6, 7, 8, 9]. Specifically, laser-induced metastable phenomena arise from diverse microscopic mechanisms, such as displacive excitations of coherent phonons via excited electronic structure, nonlinear phonon interactions, and Floquet dynamics [10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20]. For example, the Weyl semimetal (WSM) Td_d-WTe2_2 can be driven to undergo a topological phase transition into a trivial semimetal through a terahertz (THz) pump-induced shear distortion [10]. Additionally, a resonant THz pump can distort the lattice of the trivial semimetallic HgTe through nonlinear phononics, thereby triggering a transient topological phase transition into a WSM in its non-equilibrium [11]. These studies indicate that the topology of materials can be controlled by laser pumps, showing great potential for light-controlled quantum devices [1, 6]. However, these laser-induced phenomena face challenges in being utilized in optically controlled devices due to their non-equilibrium conditions characterized by short lifetimes (∼\simps) and heat dissipation [6, 10, 11, 14].

Photon fields, which are confined in photonic structures such as Fabry-Pérot cavities, plasmonic cavities, and planar waveguides, exhibiting quantum vacuum fluctuations, can modify material properties at equilibrium away from their pristine behaviors [7, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30]. For instance, a Fabry-Pérot cavity, comprising two mirrors that confine vacuum-fluctuating photons (see Figure 1a), has been used to modify the charge density wave transition temperature in bulk 1T-TaS2_2 through strong coupling between the material and the vacuum photon field [7]. In this setup, the coupling strength can be tuned by adjusting the mirror separation or their tilting angle. In addition, it is experimentally demonstrated that the vacuum fluctuating photon field can modify the integer and fractional quantum Hall effect [31] and quench superconducting stiffness [8]. A recent theoretical study suggests that a confined photon field inside a Fabry-Pérot cavity can induce a ferroelectric ground state in the quantum paraelectric SrTiO3_3 by forming a light-matter hybrid state. This process, driven by electromagnetic quantum fluctuations, is analogous to the mechanism of dynamical localization in driven systems [21]. Similarly, it has been theoretically proposed that such cavity-induced effects can enhance the critical temperature (TcT_{\mathrm{c}}) of phonon-mediated superconductors like MgB2_2 [9]. These examples highlight the potential of engineered photon fields to generate novel photon-matter hybrid states through strong light-matter interactions. In particular, photons can be tailored to interact with various degrees of freedom in condensed matter systems, including electrons, spins, orbitals, and phonons, leading to modifications in properties such as magnetism, superconductivity, and lattice vibrations. Unlike the laser-induced phenomena out of equilibrium, photon fields in photonic structures modify material properties in the steady state of thermal equilibrium [7, 9, 21, 32, 33, 34, 35, 36, 37, 38]. In addition to operating in the quantum fluctuation regime, optical cavities can also be used in the driven steady-state or thermal modes (i.e., with a non-zero photon number), offering the advantage of not requiring strong external driving due to photon confinement [32]. Precise, stable, and long-lived control over material properties is required to operate optically-controlled quantum devices, such as topological quantum computers, topological Josephson-junction circuits, and spin Hall effect devices [39, 40, 41]. And material engineering via photon fields in photonic structures could provide a new approach to achieve this goal.

Figure 1. Photon field-induced topological phase transitions in HgTe via symmetry breaking. a, Schematic image of strong coupling between matter and photons confined inside the optical cavity. b, Various topological phase transitions from the semimetal HgTe depending on the photon polarization directions with optical cavity and planar waveguide with ionic distortion. In the bottom panels of (b), 2D Brillouin zone band structures along the kx−kyk_x-k_y plane with kx=ky=0k_x = k_y = 0 centered at kz=0k_z = 0 are prepared at various topological phases.

In this study, we explore cavity-mediated topological phase transitions in bulk HgTe using state-of-the-art QEDFT calculations [9, 42, 43]. We evaluate the modified electronic and ionic structures induced by photon fields in various kinds of photonic structures (see Figure 1b) [7, 23, 25, 44]. The trivial semimetal HgTe can undergo a series of topological phase transitions to a nodal-line semimetal (NLSM), a WSM, and a topological insulator (TI), depending on the light-matter coupling strength and the relative orientation between the crystal structure of HgTe and the polarization direction of the photon field. Unlike previous approaches for symmetry engineering in HgTe via external pressure [45] or nonlinear phononics [11], by choosing photon fields in a suitable photonic structure, we could selectively engineer electronic structures of HgTe with or without ionic distortions to induce symmetry breaking and topological phase transitions without additional carrier pumping. Importantly, our approach does not require resonance with the intrinsic photon frequency of the photonic structure. Thus, the predicted light-matter interaction effects are observable even under off-resonant conditions. Our study suggests a potential approach to realize photon field-controlled topological states in a photon-matter hybridized system.

Results

The pristine HgTe, in a zinc-blende structure, is a topologically trivial semimetal with a four-fold degenerate point between parabolic valence and conduction bands at the Fermi level (see middle panel of Figure 1b). Constrained by its lattice symmetry, bulk HgTe belongs to the F‾43m\overline{F}43m point group and allows 24 symmetry operations. Upon external perturbation, emergent topological phases are unraveled in HgTe [3, 11, 45, 46]. For example, a CdTe/HgTe/CdTe quantum well structure with a sufficient thickness of HgTe was proposed and realized as the first quantum spin Hall insulator [3, 46]. External pressure, by altering the intrinsic lattice of three-dimensional bulk HgTe, can induce topological phase transitions, resulting in either a WSM or a TI phase, depending on the direction of the applied pressure [45]. These studies underscore the pivotal role of symmetry breaking in driving topological transitions in HgTe. In this work, we aim to achieve such symmetry breaking through a photon field embedded in a photonic structure. Using extensive QEDFT calculations, we propose a mechanism by which photon fields can induce topological phase transitions in HgTe.

We first consider HgTe coupled to the two polarizations of the fundamental cavity mode of a Fabry–Pérot type resonator, such that the electric field is parallel with the (001) plane of the HgTe cubic lattice (see Figure 2a). With a given light–matter coupling strength (A0=λ~/2ω~=0.0078A_0 = \tilde{\lambda}/\sqrt{2\tilde{\omega}} = 0.0078 in atomic Hartree unit), defined as the ratio between the photon–matter interaction coefficient (λ~\tilde{\lambda} in energy) and the frequency (ω~\tilde{\omega} in time−1^{-1}) of dressed photon [47], we evaluate the photon induced modification of the electronic structure and resulting atomic forces on each atom via the QEDFT approach [see Method part and

Figure 2. Topological nodal-line semimetallic phase in HgTe induced by two photons parallel with (001) plane. a, Schematic image of Fabry-Pérot cavity mirrors parallel with (001) plane of cubic HgTe structure. b, The modified charge density Δρ(r⃗)\Delta\rho(\vec{r}) of HgTe by two photons parallel with the (001) plane. Δρ(r⃗)=ρQEDFTA0=0.0078(r⃗)−ρDFT(r⃗)\Delta\rho(\vec{r}) = \rho_{\mathrm{QEDFT}}^{A_0=0.0078}(\vec{r}) - \rho_{\mathrm{DFT}}(\vec{r}), in which ρQEDFTA0=0.0078(r⃗)\rho_{\mathrm{QEDFT}}^{A_0=0.0078}(\vec{r}) and ρDFT(r⃗)\rho_{\mathrm{DFT}}(\vec{r}) are charge densities under photon fields with the light-matter coupling strength A0=0.0078A_0 = 0.0078 and without photon field. c-d, Nodal lines in (c) Fermi surface plot and (d) 2D Brillouin zone band structures at kz=0.029π/a0k_z = 0.029\pi/a_0. e, Evolution of the radius of nodal-line (drd_r) and distances (2dz2d_z) between nodal-lines with respect to light-matter coupling strength A0A_0. Blue dots and line stand for the radius of nodal-line, and red dots and line stand for the distances between nodal-lines between Weyl points. In (c), the purple and cyan surfaces indicate the hole and electron pockets.

Supplementary Information (SI) for details]. In this configuration, photon fields change the electron charge density compared to its intrinsic ground state, leading to the formation of a new light–matter hybrid state. From the charge density difference Δρ(r⃗)\Delta\rho(\vec{r}) shown in Figure 2b, we can observe the charge depletion around the (001) plane for Te atoms (green isosurface) and spherical charge accumulation for Hg atoms (yellow isosurface), indicating that photon fields parallel with the (001) plane can introduce an anisotropic charge redistribution, breaking the intrinsic crystal symmetry of HgTe. At the same time, our QEDFT calculation shows no net forces on each ion with this charge modification, indicating no change in the atomic structure of the HgTe in such a photonic structure. Figure 2c and Figure 2d show the Fermi surface and calculated band structures of bulk HgTe modified by the photon fields. Instead of a four-fold degenerate point at the Fermi level, characteristic of intrinsic HgTe, two gapless nodal-lines can be observed in the kx−kyk_x-k_y plane with different momentum (±dz\pm d_z) along the kzk_z direction. This suggests a topological phase transition, which is only contributed by the cavity-induced charge density modification and no ionic distortion. Notably, the values of the distance (dzd_z) and the radius (drd_r) of nodal-lines can be controlled via the light–matter coupling strength A0A_0. As A0A_0 is enhanced, dzd_z and drd_r increase corresponding (see Figure 2e). This behavior indicates that bulk HgTe inside an optical cavity, such that the (001) plane is parallel with the mirrors, becomes an NLSM, and its topological features can be efficiently modulated by the light–matter coupling strength.

The topological behavior of HgTe can be further engineered by tuning the lattice orientation within the optical cavity, enabling simultaneous modifications to both ionic and electronic degrees of freedom. This allows the realization of a WSM phase in cavity-driven HgTe. Unlike the previous configuration, here we rotate the HgTe crystal such that the (11ˉ01\bar{1}0) plane is aligned parallel to the cavity mirrors (see Figure 3a). In this configuration, the light-matter coupling also modifies the charge density (see Figure 3b), resulting in a charge depletion at the Te atomic site on the (11ˉ01\bar{1}0) plane and a spherical charge accumulation at the Hg atomic sites along the photon field direction. In contrast to the previous geometry, the charge redistribution on the Te atomic sites along (11ˉ01\bar{1}0) plane introduces asymmetric interactions between upper Hg-Te bonds in the (11ˉ01\bar{1}0) plane and bottom Hg-Te bonds in the (110) plane (see Figure 3d). This asymmetry results in a non-zero net force on Hg and Te atoms and induces an ionic distortion (Δd\Delta d) along the zz direction correspondingly (see the blue arrows in Figure 3d). Our QEDFT calculations confirm such observations and find that the space group of the relaxed HgTe structure becomes Imm2Imm2 (see Figure 3e) with a lattice distortion, the value of which is directly proportional to the light-matter coupling strength (see blue line in Figure 3c).

Figure 3. Weyl semimetal HgTe with two photons parallel with (11‾0)(1\overline{1}0) plane. a, Schematic image of Fabry–Pérot cavity mirrors parallel with (11‾0)(1\overline{1}0) plane of cubic HgTe structure. b, The modified charge density of HgTe by two photons aligned (11‾0)(1\overline{1}0) plane. c, Modified bonding distance (Δd\Delta d) and Weyl points distance (ΔkW\Delta k_{\mathrm{W}}) with respect to light–matter coupling strength (A0A_0). Herein, Δd\Delta d is defined as amplitude of atomic displacement from pristine geometry Δd=∣x⃗τA0−x⃗τ0∣\Delta d = \lvert\vec{x}_{\tau}^{A_0} - \vec{x}_{\tau}^{0} \rvert. d-e, The modified lattice distortion of HgTe by two photons aligned (11‾0)(1\overline{1}0) plane for (d) induced forces by modified charge density and (e) modified bonding distance. f, Fermi arc surface state achieved by cavity-induced Weyl points with w1=0.049π/a0w_1 = 0.049\pi/a_0 and w2=−0.023π/a0w_2 = -0.023\pi/a_0 values under the coupling strength A0=0.0078A_0 = 0.0078. In (a), (b), (d), and (e), orange planes indicate the (11‾0)(1\overline{1}0) plane. The inset of (c) indicates the Fermi surface, while the purple and cyan surfaces indicate the hole and electron pockets. In (d), the yellow plane stands for the (110)(110) plane, and the blue arrows indicate induced forces along the zz-direction by the modified charge density. In (e), the red dashed lines indicate the modified bonding distance between Hg and Te atoms.

The modifications of the electronic and ionic structure discussed above can lead to the emergence of Weyl points around the Fermi level (see Figure 3f). As shown in Figure 3c, with increasing the light-matter coupling strength, the system hosts a trivial semimetal phase at the low strength limit, then becomes a WSM when A0≥0.005A_0 \ge0.005. In the latter phase, the distance between two Weyl points (ΔkW=∣kW1−kW2∣\Delta k_W = |k_{W_1} - k_{W_2}|) increases with light-matter coupling strength as the ionic distortions increase (see Figure 3c). Four Weyl points stay around the Fermi level within kz=0k_z = 0 plane as (w1,w2,0)(w_1,w_2,0), (−w1,w2,0)(-w_1,w_2,0), (w2,w1,0)(w_2,w_1,0), and (−w2,−w1,0)(-w_2,-w_1,0), and the Fermi arc states that connect them on the side surface are shown in Figure 3f.

To distinguish electronic and ionic contributions, we perform QEDFT calculations where we artificially fix atomic positions to those within the F4ˉ\bar{4}3m point group, and take only the charge redistribution induced by the photon fields into account. HgTe in such a fixed geometry remains a trivial semimetal with the same photon field strength. This result indicates that the WSM phase in HgTe inside the cavity, with the (11ˉ01\bar{1}0) plane parallel to the cavity mirrors, is truly non-perturbative as it originates from the lattice symmetry breaking and consequent structural rearrangement. The SI provides details on the electronic structure analysis for the various conditions, i.e. fixed geometry and light-matter coupling strength, for the case of two photon modes parallel with the (110) plane.

As a final configuration, we consider HgTe coupled to a single photonic mode with out-of-plane polarization aligned along the [110] direction of the crystal (see Figure 4a). Such a mode can be hosted, for example, by a dielectric planar waveguide slab as a TM mode or as a hyperbolic phonon-polariton mode. The latter, recently demonstrated in hexagonal boron nitride, enables extreme sub-diffractional electron confinement and has even been shown to alter superconductivity [8, 23, 44]. As the light-matter coupling strength increases in this out-of-plane setup, we observe multiple topological phases, including TI and WSM. Similar to the Fabry-Pérot cavity case, the photon field modifies the charge distribution, with noticeable depletion around Te atoms along the polarization direction (see Figure 4b). Due to the redistribution of the charge density and minor ionic displacement,

Figure 4. Three-step topological phase transitions by a single photon polarized along the [110] direction. a, Schematic image of HgTe geometry with a single photon along the [110] direction induced by the waveguide’s TM mode. b, The modified charge density of HgTe by a single photon polarized along the [110] direction. c, Modified band gap (EgapE_{\mathrm{gap}}) with respect to cavity coupling strength (A0A_0). These regions with a green background stand for the semimetallic phase. The region with lower coupling strength (A0<0.0012A_0 < 0.0012) is topologically trivial, and the Z2Z_2 number is 1 for the phase with larger coupling strength (0.0012≤A0≤0.00270.0012 \le A_0 \le0.0027). d, Modified lattice distortion of HgTe by a single photon polarized along the [110] direction. e, Modified bonding distance (Δd\Delta d, blue) and Weyl points distance (ΔkW\Delta k_W, red) with respect to coupling strength (A0A_0). Blue dots and line stand for bonding distance, and red dots and line stand for the distance between Weyl points. f, Fermi arc surface state on (001) side surface for the 1D photon field-driven HgTe with A0=0.0039A_0 = 0.0039. Hollow circles stand for four Weyl points. In (a), (b), and (d), red arrows indicate [110] direction. In (c) and (e), the green boxes indicate the trivial semimetallic phase region. Insets of (c) and (e), 2D Brillouin zone band structure at kz=0.0k_z = 0.0 with A0=0.0027A_0 = 0.0027 and A0=0.0039A_0 = 0.0039, respectively. In (d), a green arrow indicates [11ˉ01\bar{1}0] direction, and the blue arrows indicate induced forces along the zz-direction by the modified charge density.

HgTe becomes a TI with a topological number of Z2=1Z_2 = 1 and a band gap opening around the Γ\Gamma point, when 0.0012≤A0≤0.00270.0012 \le A_0 \le0.0027 (see Figure 4c). For a coupling strength in the region of 0.0027<A0<0.00330.0027 < A_0 < 0.0033, a semimetal phase can be found, in which electronic states around the Γ\Gamma point maintain topologically non-trivial properties while both electron pockets and hole pockets staying at different kk points can be observed at the Fermi level (see Fig. S4 in SI).

Upon further increase of the light-matter coupling strength (A0≥0.0033A_0 \ge0.0033), the contribution from lattice distortion becomes prominent and contributes further to the change of electronic structures. Under strong out-of-plane phonon fields, the charge depletion for Te atoms along [110][110] direction leads to asymmetric bonding configurations for the two Hg-Te bonds aligned with the [110][110] direction, resulting in a net force along the [001][001] direction and reducing the lattice symmetry to the Cm(8) space group (see Figure 4d). The consequent large lattice distortion leads to the formation of four Weyl points around the Fermi level (see Figure 4d and Figure 4e), whose projections on the (001)(001) surface are connected by the Fermi arc states shown in Figure 4f. We note that, in same light-matter coupling strength window (with A0≥0.0033A_0 \ge0.0033), if we do not allow for structural relaxation keeping the pristine lattice structure (F4‾3mF\overline{4}3m point group), the electronic charge modification alone does not alter the topological phase of HgTe (as TI) and only increases the band gap (see Fig. S3 in SI). This result indicates that the self-consistent cooperation between charge and lattice modifications, induced by a single photon field polarized along the [110][110] direction, is necessary to achieve the complex topological phase diagram in bulk HgTe. In the SI, we discuss further details of electronic structure analysis under various conditions, such as fixed geometry and different light-matter coupling strengths.

These examples demonstrate how varying the orientation of bulk HgTe, strongly coupled to different photon modes, can produce a rich variety of complex topological phases. Table 1 summarizes multiple topological phases observed in bulk HgTe under different photon fields and crystal alignments. We found that two-photon modes aligned along the (111)(111) plane induce Weyl points through ionic distortions (see Fig. S2 in the SI). Additionally, a one-photon mode oriented along the [111][111] direction drives a two-step topological phase transition from a TI to a semimetal with Z2=1Z_2 = 1 (see Fig. S5 in the SI). These findings highlight that the photonic environment can induce symmetry breaking in materials by modifying both electronic and ionic structures, enabling the emergence of multiple topological phases in bulk HgTe.

photon directions[110][110][111][111](11‾0)(1\overline{1}0)(111)(111)(001)(001)
# of ph. polarizations11222
1st phaseTITIWSMWSMNLSM
2nd phaseSemimetalSemimetal
3rd phaseWSM
Space groupImm2Cm(8)Imm2Cm(8)F4‾3mF\overline{4}3m

Table 1. Cavity-induced topological phase transition from trivial semimetallic phase and modified space group from F4‾3mF\overline{4}3m depending on photon polarization direction

Discussion

Vacuum photon fluctuations-induced topological phase transitions are studied using state-of-the-art QEDFT calculations. We show that topological phases of bulk HgTe can be selectively controlled depending on the orientations of bulk HgTe relative to the polarization of photonic modes of an optical cavity and a waveguide of dielectric or hyperbolic type. The photon-matter interaction induces changes of the electronic charge density, in a process similar to the dynamical localization in driven systems [21], which in turn makes it possible to introduce ionic distortion and crystal symmetry breaking. As a result, the emergent topological phases in photon field-dressed HgTe can be selectively activated, depending on the photon field polarization directions and strengths. When the (001)(001) plane of HgTe is parallel to the two polarizations of the mode of an optical cavity, the trivial semimetal HgTe becomes an NLSM via photon field-induced electronic charge rearrangement but without crystal structure changes. When, instead, the (11‾0)(1\overline{1}0) plane of HgTe is parallel with the two in-plane photon fields of the optical cavity, the topological phase transition to WSM follows from ionic distortion and related crystal symmetry breaking. Finally, when a single photon mode of a dielectric planar waveguide is coupled to HgTe along the [110][110] direction, the system displays a TI phase within a weak photon field-matter coupling regime, and a WSM phase under strong coupling, as a consequence of ionic distortions.

The range of light-matter coupling strength (0≤A0≤0.0080 \le A_0 \le0.008) explored in our work is realistically achievable in hyperbolic photon-polariton or plasmon-polariton based photonic structures in their ground states, even in the absence of real photons (dark cavity) [9, 26, 27]. On the other hand, such strong couplings for the two-mirrored optical cavity configuration remain challenging to achieve by photon vacuum-fluctuation only. However, in principle, they can be reachable in the case of a non-zero photon population, such as a resonantly pumped Fabry-Pérot cavity [48, 49, 50, 51, 52]. In the SI, the light-matter coupling strengths (A0A_0) with vacuum fluctuating photons and pumped photons are discussed. Furthermore, additional future studies that bridge theoretical models and experimental observations will be helpful to fully understand the feasibility of strong light-matter interaction of vacuum-fluctuating photon fields in different types of photonic environments [7, 32, 33, 53].

Photon field-induced phenomena present a clear advantage over strain-induced or laser-driven approaches. By selecting the appropriate sample orientation and tuning the coupling strength within a photonic structure, multiple emergent topological states in bulk HgTe can be accessed and controlled under ambient conditions. In contrast, pressure-induced transitions require high or anisotropic pressures to drive HgTe into a topological phase [45], while laser-driven methods [11] produce only short-lived, non-equilibrium states that quickly succumb to irreversible heating, limiting their potential for device applications. Our study suggests that photon fields confined within optical cavities or waveguides offer a more robust and versatile platform for manipulating topology, with both geometry and coupling strength serving as effective tuning parameters.

Method

We used the custom-made QEDFT implementation within the Quantum Espresso package to evaluate the electronic structure, the ionic relaxation, and photon-matter interactions [9, 47, 54]. A plane-wave basis up to 80 Ry was employed to describe the Kohn-Sham wavefunctions, and spin-orbit coupling was included. The Perdew-Wang-type local density approximation functional is considered to describe the electron-electron exchange and correlation effects [55]. The core-level states were considered via the projector augmented wave method. We sampled the Brillouin zone with a 6×6×66 \times6 \times6 grid of points for the HgTe cubic superlattice with 4 Hg and 4 Te atoms and checked the k-point convergence up to 9×9×99 \times9 \times9 and the consistency in its primitive lattice. To investigate the topological properties of HgTe with the Wannier interpolation technique, we used Wannier90 and WannierTools packages [56, 57]. Bloch states with 200×200×200200 \times200 \times200 and 200×200200 \times200 sampled grid points in the Brillouin zone were considered for finding the Fermi level and the Fermi arc surface plot, respectively.

To study the effect of photon fields on electronic and ionic structures from first principles, we use the QEDFT framework based on the non-relativistic Pauli-Fierz Hamiltonian [47]. The ground state properties of the electronic subsystem can be obtained via the auxiliary Kohn–Sham (KS) scheme. The KS Hamiltonian reads

H^KS=−ℏ22me∇2+vKS(r),(1)\hat{H}_{\mathrm{KS}}=-\frac{\hbar^2}{2m_e}\nabla^2+v_{\mathrm{KS}}(\mathbf{r}), \tag*{(1)}

where the KS potential vKS(r)v_{\mathrm{KS}}(\mathbf{r}) comprises the external potential vext(r)v_{\mathrm{ext}}(\mathbf{r}), the Hartree and electronic exchange–correlation potential vHxc(r)v_{\mathrm{Hxc}}(\mathbf{r}), and the photon–electron exchange–correlation potential vpxc(r)v_{\mathrm{pxc}}(\mathbf{r}). For the latter, we adopt the electron-photon exchange approximation within the local density approximation (pxLDA) [47]. The corresponding pxLDA potential is determined by solving the Poisson equation:

∇2vpxLDA(r)=−∑α=1Mp2π2λ~α2ω~α2[(ϵ~α⋅∇)2(3ρ(r)8π)23].(2)\nabla^2v_{\mathrm{pxLDA}}(\mathbf{r})=-\sum_{\alpha=1}^{M_p}\frac{2\pi^2\tilde{\lambda}_{\alpha}^{2}}{\tilde{\omega}_{\alpha}^{2}}\left[(\tilde{\boldsymbol{\epsilon}}_{\alpha}\cdot\nabla)^2\left(\frac{3\rho(\mathbf{r})}{8\pi}\right)^{\frac{2}{3}}\right]. \tag*{(2)}

Here λ~α\tilde{\lambda}_{\alpha}, ω~α\tilde{\omega}_{\alpha}, and ϵ~α\tilde{\boldsymbol{\epsilon}}_{\alpha} are the light-matter interaction coefficient, frequency, and polarization for the α\alpha-th dressed photon mode. The connection between dressed and bare photon frequencies can be found in Refs. [9] and [47]. Although a specific photon frequency ω~α\tilde{\omega}_{\alpha} is used, the strength of the photon field effect in the pxLDA approximation is largely governed by the ratio λ~α/ω~α\tilde{\lambda}_{\alpha}/\tilde{\omega}_{\alpha}, if we consider one or two orthogonal effective photon modes with identical frequency and coupling strength. In our work, we denote the light–matter coupling strength λ~α/2ω~α\tilde{\lambda}_{\alpha}/\sqrt{2\tilde{\omega}_{\alpha}} as A0A_0, which is comparable with the amplitude of the vector potential of photon field in the non-relativistic Pauli-Fierz Hamiltonian. Finally, the forces acting on nuclei are evaluated using the Hellmann–Feynman theorem.

Acknowledgments

We acknowledge support by the Max Planck Institute New York City Center for Non-Equilibrium Quantum Phenomena, the Cluster of Excellence “CUI: Advanced Imaging of Matter”–EXC 2056–Project ID 390715994, European Research Council (ERC-2024-SyG-101167294; UnMySt), and Grupos Consolidados (IT1453-22). P.T. was supported by the National Natural Science Foundation of China (Grants No. 12234011 and No. 12374053) and the National Key Basic Research and Development Program of China (Grant No. 2024YFA1409100). D.S. was supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT) (No. RS-2024-00333664) and the Ministry of Science and ICT (No. RS-2022-NR068223). M.K.S. is supported by the Novo Nordisk Foundation, Grant number NNF22SA0081175, NNF Quantum Computing Programme. We also acknowledge support from the Max Planck–New York Center for Non-Equilibrium Quantum Phenomena. The Flat-iron Institute is a division of the Simons Foundation.

Author Contributions

D.S., S.L., P.T., and A.R. wrote the manuscript. D.S. performed the ab initio calculations under the supervision of P.T. and A.R. I.L. and A.R. developed the QEDFT code. D.S., B.F., and P.T. analyzed the topological phase of HgTe. E.V.B., M.K.S., I.L., and S.L. investigated the condition of realistic light-matter coupling strength. All authors discussed the results and contributed to the final paper.

References

  1. [1]Basov, D. N., Averitt, R. D. & Hsieh, D. Towards properties on demand in quantum materials. Nature Materials 16, 1077–1088 (2017).DOI
  2. [2]Rudner, M. S. & Lindner, N. H. Band structure engineering and non-equilibrium dynamics in Floquet topological insulators. Nature Reviews Physics 2, 229–244 (2020).DOI
  3. [3]Bernevig, B. A., Hughes, T. L. & Zhang, S.-C. Quantum Spin Hall Effect and Topological Phase Transition in HgTe Quantum Wells. Science 314, 1757–1761 (2006).
  4. [4]Nova, T. F., Disa, A. S., Fechner, M. & Cavalleri, A. Metastable ferroelectricity in optically strained SrTiO₃. Science 364, 1075–1079 (2019).DOI
  5. [5]Guan, M. X., Wang, E., You, P. W., Sun, J. T. & Meng, S. Manipulating weyl quasiparticles by orbital-selective photoexcitation in WTe2. Nat. Commun. 12, 1885 (2021).
  6. [6]de la Torre, A. et al. Colloquium: Nonthermal pathways to ultrafast control in quantum materials. Reviews of Modern Physics 93, 041002 (2021).DOI
  7. [7]Jarc, G. et al. Cavity-mediated thermal control of metal-to-insulator transition in 1T-TaS₂. Nature 622, 487–492 (2023).DOI
  8. [8]Keren, I. et al. Cavity-Altered Superconductivity (2025). URL http://arxiv.org/abs/2505.17378.
  9. [9]Lu, I.-T. et al. Cavity-enhanced superconductivity in MgB₂ from first-principles quantum electrodynamics (QEDFT). Proceedings of the National Academy of Sciences 121, e2415061121 (2024).DOI
  10. [10]Sie, E. J. et al. An ultrafast symmetry switch in a Weyl semimetal. Nature 565, 61–66 (2019).DOI
  11. [11]Shin, D., Rubio, A. & Tang, P. Light-Induced Ideal Weyl Semimetal in HgTe via Nonlinear Phononics. Physical Review Letters 132, 016603 (2024).
  12. [12]Vaswani, C. et al. Light-Driven Raman Coherence as a Nonthermal Route to Ultrafast Topology Switching in a Dirac Semimetal. Physical Review X 10, 021013 (2020).DOI
  13. [13]McIver, J. W. et al. Light-induced anomalous Hall effect in graphene. Nature Physics 16, 38–41 (2020).
  14. [14]Disa, A. S., Nova, T. F. & Cavalleri, A. Engineering crystal structures with light. Nature Physics 17, 1087–1092 (2021).DOI
  15. [15]Zhou, S. et al. Pseudospin-selective Floquet band engineering in black phosphorus. Nature 614, 75–80 (2023).DOI
  16. [16]Bao, C., Tang, P., Sun, D. & Zhou, S. Light-induced emergent phenomena in 2D materials and topological materials. Nature Reviews Physics 4, 33–48 (2022).DOI
  17. [17]Zhou, S. et al. Floquet Engineering of Black Phosphorus upon Below-Gap Pumping. Physical Review Letters 131, 116401 (2023).DOI
  18. [18]Fan, B., Duan, W., Rubio, A. & Tang, P. Chiral Floquet engineering on topological fermions in chiral crystals. npj Quantum Materials 9, 101 (2024).DOI
  19. [19]Bloch, J., Cavalleri, A., Galitski, V., Hafezi, M. & Rubio, A. Strongly correlated electron–photon systems. Nature 606, 41–48 (2022).DOI
  20. [20]Torre, A. d. l. et al. Colloquium: Nonthermal pathways to ultrafast control in quantum materials. Reviews of Modern Physics 93, 041002 (2021).DOI
  21. [21]Latini, S. et al. The ferroelectric photo ground state of SrTiO₃: Cavity materials engineering. Proc. Natl. Acad. Sci. USA 118, e2105618118 (2021).DOI
  22. [22]Lu, I.-T. et al. Cavity engineering of solid-state materials without external driving. Adv. Opt. Photon. 17, 441–525 (2025).DOI
  23. [23]Herzig Sheinfux, H. et al. High-quality nanocavities through multimodal confinement of hyperbolic polaritons in hexagonal boron nitride. Nat. Mater. 23, 499–505 (2024).
  24. [24]Weber, L., Viñas Boström, E., Claassen, M., Rubio, A. & Kennes, D. M. Cavity-renormalized quantum criticality in a honeycomb bilayer antiferromagnet. Communications Physics 6, 247 (2023).
  25. [25]Dong, X.-L., Li, P.-B., Gong, Z. & Nori, F. Waveguide QED with dissipative light-matter couplings. Physical Review Research 7, L012036 (2025).DOI
  26. [26]Jin, X. et al. Reshaping the phonon energy landscape of nanocrystals inside a terahertz plasmonic nanocavity. Nature Communications 9, 763 (2018).DOI
  27. [27]Stern, H. L. et al. A quantum coherent spin in hexagonal boron nitride at ambient conditions. Nature Materials 23, 1379–1385 (2024).
  28. [28]Hugall, J. T., Singh, A. & van Hulst, N. F. Plasmonic Cavity Coupling. ACS Photonics 5, 43–53 (2018).DOI
  29. [29]Forn-Díaz, P., Lamata, L., Rico, E., Kono, J. & Solano, E. Ultrastrong coupling regimes of light-matter interaction. Reviews of Modern Physics 91, 025005 (2019).
  30. [30]Garcia-Vidal, F. J., Ciuti, C. & Ebbesen, T. W. Manipulating matter by strong coupling to vacuum fields. Science 373, eabd0336 (2021).
  31. [31]Enkner, J. et al. Tunable vacuum-field control of fractional and integer quantum Hall phases. Nature 641, 884–889 (2025).
  32. [32]Chiriacò, G. Thermal Purcell effect and cavity-induced renormalization of dissipations. Physical Review B 110, L161107 (2024).DOI
  33. [33]Pannir-Sivajothi, S. & Yuen-Zhou, J. Blackbody Radiation and Thermal Effects on Chemical Reactions and Phase Transitions in Cavities. ACS Nano 19, 9896–9905 (2025).
  34. [34]Schäfer, C., Flick, J., Ronca, E., Narang, P. & Rubio, A. Shining light on the microscopic resonant mechanism responsible for cavity-mediated chemical reactivity. Nature Communications 13, 7817 (2022).DOI
  35. [35]Svendsen, M. K. et al. Theory of Quantum Light-Matter Interaction in Cavities: Extended Systems and the Long Wavelength Approximation (2023). URL arxiv.org/abs/2312.17374.arxiv.org/abs/2312.17374
  36. [36]Ruggenthaler, M., Sidler, D. & Rubio, A. Understanding Polaritonic Chemistry from Ab Initio Quantum Electrodynamics. Chemical Reviews 123, 11191–11229 (2023).
  37. [37]Sidler, D., Ruggenthaler, M., Schäfer, C., Ronca, E. & Rubio, A. A perspective on ab initio modeling of polaritonic chemistry: The role of non-equilibrium effects and quantum collectivity. The Journal of Chemical Physics 156, 230901 (2022).DOI
  38. [38]Flick, J., Ruggenthaler, M., Appel, H. & Rubio, A. Atoms and molecules in cavities, from weak to strong coupling in quantum-electrodynamics (QED) chemistry. Proceedings of the National Academy of Sciences 114, 3026–3034 (2017).DOI
  39. [39]Jungwirth, T., Wunderlich, J. & Olejník, K. Spin Hall effect devices. Nature Materials 11, 382–390 (2012).DOI
  40. [40]Quantum, M. A. et al. Interferometric single-shot parity measurement in inas–al hybrid devices. Nature 638, 651–655 (2025).DOI
  41. [41]Nadj-Perge, S. et al. Observation of majorana fermions in ferromagnetic atomic chains on a superconductor. Science 346, 602–607 (2014).
  42. [42]Schäfer, C., Buchholz, F., Penz, M., Ruggenthaler, M. & Rubio, A. Making ab initio QED functional(s): Non-perturbative and photon-free effective frameworks for strong light–matter coupling. Proceedings of the National Academy of Sciences 118, e2110464118 (2021).DOI
  43. [43]Ruggenthaler, M. et al. Quantum-electrodynamical density-functional theory: Bridging quantum optics and electronic-structure theory. Physical Review A 90, 012508 (2014).DOI
  44. [44]De Oliveira, R. E. P. & De Matos, C. J. S. Graphene based waveguide polarizers: In-depth physical analysis and relevant parameters. Sci Rep 5, 16949 (2014).arxiv.org/abs/1505.07438
  45. [45]Ruan, J. et al. Symmetry-protected ideal Weyl semimetal in HgTe-class materials. Nature Communications 7, 11136 (2016).
  46. [46]König, M. et al. Quantum spin hall insulator state in HgTe quantum wells. Science 318, 766–770 (2007).pubmed.ncbi.nlm.nih.gov/17885096
  47. [47]Lu, I-T. et al. Electron-photon exchange-correlation approximation for quantum-electrodynamical density-functional theory. Phys. Rev. A 109, 052823 (2024).DOI
  48. [48]Kim, T. et al. Fabry–Perot Cavity Control for Tunable Raman Scattering. Small 19, 2207003 (2023).DOI
  49. [49]Li, Z. et al. Fabry-perot resonance modes in a mos₂-based vertical stacking cavity for light-matter coupling and topological phase singularity. Physical Review B 111, 205414 (2025).DOI
  50. [50]Huang, X. et al. Fabry-Perot cavity enhanced light-matter interactions in two-dimensional van der Waals heterostructure. Nano Energy 62, 667–673 (2019).DOI
  51. [51]Zhou, L. et al. Cavity Floquet engineering. Nature Communications 15, 7782 (2024).DOI
  52. [52]Grunwald, L., Boström, E. V., Svendsen, M. K., Kennes, D. M. & Rubio, A. Cavity Spectroscopy for Strongly Correlated Polaritonics Systems. Physical Review Letters 134, 246901 (2025).DOI
  53. [53]Fassioli, F., Faist, J., Eckstein, M. & Fausti, D. Controlling radiative heat flow through cavity electrodynamics. arXiv (2024). URL arxiv.org/abs/2403.00851.arxiv.org/abs/2403.00851
  54. [54]Giannozzi, P. et al. Advanced capabilities for materials modelling with quantum espresso. Journal of Physics: Condensed Matter 29, 465901 (2017).
  55. [55]Perdew, J. P. & Wang, Y. Accurate and simple analytic representation of the electron-gas correlation energy. Phys. Rev. B 45, 13244–13249 (1992).pubmed.ncbi.nlm.nih.gov/10001404
  56. [56]Pizzi, G. et al. Wannier90 as a community code: new features and applications. Journal of Physics: Condensed Matter 32, 165902 (2020).
  57. [57]Wu, Q., Zhang, S., Song, H-F., Troyer, M. & Soluyanov, A. A. WannierTools: An open-source software package for novel topological materials. Computer Physics Communications 224, 405–416 (2018).

Paper details

vlnc:W_xaj58e2e
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents