WorksPhysics and Astronomy
Phases of deformed sine dilaton gravity and JT limit
Abstract
We study the implications of marginal deformation in sine dilaton gravity (sDG). We investigate the thermodynamic properties of deformed sine dilaton gravity (dsDG) and examine the phase stability of black holes in two space-time dimensions. We found that the deformation parameter () sets a critical temperature threshold (). Below this critical value (), the system enters an unphysical phase characterized by a fractional density of states and a negative Wald entropy. Above the critical temperature (), we obtain a physical black hole phase with positive entropy and negative free energy. Furthermore, we evaluate the Komar integral, derive the Casimir function for dsDG, and establish the first law of black hole thermodynamics. Finally, we explore the infrared (IR) limit of dsDG which we identify as Jackiw-Teitelboim (JT) gravity accompanied by marginal deformation. We also perform a detailed analysis of various thermodynamic entities pertinent to this deformed JT solution.
Introduction and overview
In recent years, the two-dimensional gravitational model known as Jackiw-Teitelboim (JT) gravity [1]-[3] has played a significant role as the simplest paradigm for understanding the gauge/gravity duality [4]-[5], with its boundary physics described by the one-dimensional quantum mechanical Sachdev-Ye-Kitaev (SYK) model [6]-[7]. JT gravity is a two-dimensional Einstein gravity coupled with a scalar field (known as dilaton) and a negative cosmological constant. As an exactly solvable model of 2D quantum gravity, JT gravity provides valuable insights into quantum gravity and black hole physics [8]. On the other hand, the SYK model is a one-dimensional, maximally chaotic quantum mechanical system describing the interactions of Majorana fermions, which can be solved exactly in the strong-coupling and Large limits.
Interestingly, the authors in [9]-[10] generalized the two-dimensional gravity by introducing a periodic dilaton potential known as sine dilaton gravity (sDG), which acts as a ultraviolet (UV) completion of conventional JT gravity. The boundary dual of sDG is described by the double scaled SYK model (DSSYK) [11]-[12]. The DSSYK model features several intriguing properties, including the non-linear behavior of entropy, two distinct notions of temperature, and a bounded energy spectrum characterized by a periodic chord space Hamiltonian [11]. On the other hand, the sDG model has proven useful in understanding two-dimensional quantum cosmological models [13]-[14]. The sDG theory features an interpolating geometry capable of producing both de Sitter () and Anti-de Sitter () space-time in different limits, depending on the choice of the principal branch [9]. In other words, the DSSYK/sDG duality offers significant insights into gauge/gravity duality in lower dimensions and has consequently become a primary focus of recent literature.
It is worth noting that the authors in [15] explored one-loop corrections in the context of the DSSYK/sDG duality, while the authors in [16] explicitly computed the Krylov complexity in DSSYK and its bulk dual in sDG. Additionally, the authors in [17] computed the holographic central charges for sDG () and its low-energy limit, JT gravity (), finding that . This indicates that the sDG model can be interpreted as the UV completion of JT gravity. Furthermore, the authors in [18] constructed a holographic -function for the RG flow from sDG to JT gravity. Recently, irrelevant deformations in the context of DSSYK and their implications for sDG theory have been explored in [19]. It was demonstrated in [9] that sDG can be rewritten as two copies of Liouville CFT at the classical level. In the present work, we discuss the effects due to marginal deformation into the sine dilaton gravity, following the approach of [20] and investigate its implications in the thermodynamics of marginally deformed 2D black holes.
Our analysis reveals that the deformation modifies key thermodynamic observables, such as the Hawking temperature, the Wald entropy, and the free energy of the black holes. Remarkably, these modifications preserve the standard form of the first law of black hole thermodynamics. A crucial physical implication of the marginal deformation is that it introduces a minimum temperature threshold (). Below this critical value (), the system enters an unphysical phase characterized by a fractional density of states and a negative Wald entropy. Above the critical value (), the entropy becomes positive and increases with temperature, while the free energy decreases with a rise in temperature. Furthermore, we derive the corresponding Casimir function for deformed sDG (dsDG) which play key role in establishing the first law of black hole mechanics. Finally, we explore the infrared (IR) limit of deformed dsDG to obtain deformed JT (dJT) gravity, where we analyze its thermal properties and density of states.
The rest of the paper is organized as follows.
In Section 2, we discuss marginal deformations in the Liouville theory framework along the lines of [20]. We then translate the deformations into the sDG framework, thus setting up the background of our analysis.
In Section 3, we compute the black hole solutions of the deformed sDG theory and comment on its conformal structure.
In Section 4, we study the thermodynamic properties of the deformed sDG black holes, investigating their phase stability and the density of states.
In Section 5, we compute the Komar integral and the associated Casimir function of the dsDG and verify the first law of black hole mechanics.
In Section 6, we study the infrared (IR) limit of deformed sDG, which yields deformed JT (dJT) gravity. We compute the black hole solutions of dJT and examine their thermodynamic behavior.
Finally, in Section 7, we summarize our main conclusions and outline some interesting directions for future work.
Deformed sine dilaton gravity and Liouville CFT
Marginal deformations in a Liouville conformal field theory (CFT) provide an interesting extension of the theory, as they preserve conformal invariance even at the level of conformal perturbation theory [20]. In other words, their study captures how the Liouville framework accommodates non-trivial modifications while retaining its underlying conformal structure.
Furthermore, these deformations provide a controlled starting point for investigating how the interaction changes quantum observables, particularly the sphere partition function [20]. Interestingly, sine dilaton gravity (sDG) [9], [18] can also be recast into the Liouville theory framework. Therefore, it is naturally interesting to study the implications of these deformations on gravitational observables in the context of sDG and their interpretation in the corresponding double-scaled SYK (DSSYK) boundary theory. In this section, we establish the theoretical framework underlying our analysis by discussing the marginal deformations into the sDG framework [20].
The sDG is a theory of gravity in two space-time dimensions characterized by a sinusoidal potential [9]. It serves as the UV completion of Jackiw-Teitelboim (JT) gravity, which features a linear potential [9]–[10]. The complete action for the sDG theory1 is given by [9]
where represents the two-dimensional Ricci scalar, denotes the dilaton scalar field, and the overall coupling is proportional to the inverse 2D gravitational constant. Furthermore, corresponds to the Gibbons-Hawking-York boundary term [16], and represents the appropriate boundary counter-term, which are given below
where denotes the determinant of the induced metric on the boundary , and represents the trace of the extrinsic curvature.
Interestingly, the authors in [9], [18], show that in the conformal gauge (i.e., , being the flat metric), the sDG theory (2) can be recast as a sum of two copies of the Liouville CFT
where and represent the redefined fields2. Here, and are the corresponding Liouville parameters, and , denote the cosmological constants.
In the literature, this theory (3) is referred to as the Complex Liouville String (CLS) theory [20], characterized by a sum of two Liouville CFTs with and complex conjugate central charges. The authors in [20] studied the CLS and its marginal deformation in detail within the Liouville theory framework. In particular, they introduced a marginal deformation of the following form
where represents the deformation operator and is the corresponding deformation parameter. Here, and are complex parameters constrained by the marginality condition [20]
with are the background charges, defined as for . It can be shown that the marginality condition (5) ensures that the operator (4) possesses the precise scaling dimension required to be marginal3. They proposed this deformation to study the Virasoro Minimal String [21] and the Complex Liouville String in a unified framework, which has interesting connections with matrix models, de-Sitter gravity, and the DSSYK model [22, 23].
In the following, we introduce a marginal deformation along the lines of [20] into the sDG model of 2D gravity (1), which serves as the foundation of our analysis. To begin with, we rescale the fields as
Using these rescalings (6), we can express and in terms of and as follows (see footnote 2)
Next, we substitute the values of the background charges in terms of , along with the relation , into condition (5). This yields the following quadratic equation for in terms of and
Solving the above equation (8) for , we obtain
Thus, the marginality condition (5) imposes the relation between and (9). Now substituting the expression for and from (7) and the relation (9) into the operator (4), we find4
In the subsequent analysis, we set the following condition on the Liouville parameters
This constraint (11) further simplifies the deformation (10) to
In the rest of the paper, we study this marginal deformation (12) in detail. Before proceeding further, it is worth noting that condition (11) simplifies the deformation in such a way that it modifies the conformal factor while preserving the conformal structure (see § 3.1 and [9]). Moreover, this condition (11), along with the relation (9) and , further restricts us to a special class of marginal deformations where the parameters obey the following conditions
These relations (13) completely fix the parameters of the deformation operator in terms of the underlying Liouville parameters, providing the stage for analyzing the physical implications in subsequent sections.
Real deformed sDG
In this section, we study real marginally deformed sine dilaton gravity (rsDG) [20]. This deformation can be interpreted as the sum of a marginal deformation () and its complex conjugate (), yielding a real deformed sDG. For the single marginal deformation case, see Appendix § 9. Deforming the sDG leads to a modified space-time structure, which also alters the thermal properties of black holes. To be specific, we compute the black hole solutions for rsDG black holes in this section.
The action for rsDG [20] is given by
where is a real deformation parameter. The associated boundary terms are given below
where is a constant chosen to cure all boundary divergences.
Black hole solutions
In this subsection, we examine the dynamical equations of motion associated with rsDG (14). In particular, we obtain the black hole solutions in the static gauge [24]. On varying the action (14) with respect to the space-time metric () and the dilaton (), we obtain the following equations of motion:
where the potential is defined as . Here, denotes the derivative with respect to the dilaton ().
Now, one can easily solve the field equations (16) and (17) in the Euclidean static gauge [24]
where is the radial coordinate. Solving equations (16) and (17) in the gauge (18) yields the following deformed black hole solutions5
where the subscript “bh” denotes the black hole solution, and is an integration constant. The black hole horizon can be obtained by solving , which yields
Similarly, the boundary of spacetime is located at , where diverges. Taking the limit , we simultaneously recover the undeformed horizon radius and the undeformed boundary [9]. In other words, the deformation parameter modifies both the black hole horizon and the boundary structure.
Remarkably, under the following coordinate transformation
the static line element (18) can be re-expressed in the form of a conformally AdS metric,
where and . Here, stands for the effective AdS metric, given below
Notice that our choice of the radial contour (22) is similar to that of the undeformed theory [9], with the addition of the deformation parameter . For the undeformed theory, this choice demonstrated that a physical bulk probe experiences an effective AdS geometry, which was crucial for matching correlation functions and establishing the sDG/DSSYK duality [9]-[10]. In a similar spirit, we argue that for the deformed theory, a bulk probe consisting of a massive scalar field non-minimally coupled to the dilaton,
will likewise experience an effective AdS geometry, thereby preserving the structure of the holographic dictionary.
Thermodynamics and phase stability
In this section, we investigate the thermodynamic properties of the real deformed sine dilaton gravity (rsDG) black holes (19)-[20]. In particular, we obtain their Hawking temperature [25] and examine thermal observables such as Wald entropy [26]-[27] and free energy [28]-[29]. Finally, we analyze the phase stability of these black holes.
In literature, the Hawking temperature () [25] is defined as
For rsDG balck holes, the Hawking temperature can be obtained by differentiating equation (19) with respect to radial coordinate at the horizon , which yields the following
On the other hand, evaluating (19) directly at gives the horizon condition
Notice that one can express the Hawking temperature (27) in a more compact form. To this end, squaring and adding equations (27) and (28), followed by a straightforward rearrangement of terms, leads to
As expected, in the undeformed limit (), the equation (29) smoothly reduces to the standard Hawking temperature of the undeformed theory [9].
Now, we compute the Wald entropy () [26] associated with the rsDG black holes. We obtain by varying the action (14) with respect to the Riemann curvature tensor () as follows
where is the Lagrangian and is the anti-symmetric tensor, with a normalization condition given as [26].
Using equations (14) and (30), we obtain
where we have used the dilaton profile (20) and the horizon radius given in (21). This demonstrates that the Wald entropy of the black holes explicitly depends on the deformation parameter ().
Next, we examine the free energy () associated with the deformed black hole solution (19). Within the Euclidean path integral formulation, the free energy [28] is defined as
where denotes the thermodynamic partition function, is the corresponding Euclidean on-shell action, and is the inverse Hawking temperature.
Notice that the free energy receives contributions from both bulk and boundary terms. To determine the bulk contribution, we first compute the Ricci scalar, . Substituting along with the solutions (19)–(20) into equation (14), and integrating over the radial and time coordinates, we obtain
where and is the boundary cut-off. In the asymptotic limit, and .
Similarly, the contributions from the Gibbons-Hawking-York (GHY) boundary term and the counter-terms are given by
Adding the bulk contribution (33) and the boundary contributions (34)–(35), we obtain the renormalized on-shell action () as follows
Using the above expression (36) in the definition (32), we obtain the free energy as follows
Notice that in the limit , we smoothly recover the black hole free energy corresponding to pure sine dilaton gravity [9]. In other words, the deformation parameter directly shifts both the thermodynamic entropy and the total free energy of the black hole, demonstrating how the marginal deformations alter the thermal stability.
In the following, we express the Wald entropy (31) and free energy (37) of the deformed black holes explicitly in terms of the Hawking temperature (26). This formulation enables us to analyze their temperature dependence for various values of the deformation parameter . To begin with, we express in terms of the Hawking temperature. Toward this end, we solve equations (27) and (28) for and , which yields
Here, we drop the subscript in temperature for brevity.
It is straightforward to determine from equation (38) using the trigonometric identity , which yields
Substituting equation (39) back into (38), we obtain
Now we define the quantities, and , such that we have
Substituting the components of equation (41) into equation (40) for , and applying the trigonometric subtraction identity for sine, we obtain
Selecting the appropriate physical branch for , we arrive at
Using the above expression (43), one can express the Wald entropy (31) in terms of the temperature as follows
In order to express the free energy (37) as a function of the temperature , we first substitute equation (27) into the free energy to replace the combination with which yields
Next, substituting the expressions from equations (28), (39), and (43) into equation (45) yields
Before proceeding further, it is worth noting that the entropy (44) and free energy (46) satisfy the fundamental thermodynamic relation
Next, we plot these quantities (44)–(46) against the temperature for various values of . It is interesting to note that the deformation parameter significantly alters both the entropy and the free energy of the black holes. For instance, in the absence of deformation (), the entropy starts at zero and grows continuously with temperature, as shown in Figure 1a. However, in the presence of deformation, there exists a minimum temperature below which the entropy becomes negative and corresponds to unphysical (micro) states or degree of freedom in sine dilaton gravity.
Figure 1. Phase stability of rsDG black holes for coupling parameter, .
The critical temperature entirely depends on the deformation parameter () and can be obtained analytically via the vanishing condition of the Wald entropy (31), as shown below
Physically, the thermodynamic entropy provides a measure of the density of states () i.e., . In the temperature regime (), one finds that
This implies that given by (43) is negative in the region . As a result, the Wald entropy () (31), which is proportional to the horizon value (), turns negative. This formally leads to a density of states () strictly less than unity as shown below
where .
Now, we perform a perturbative expansion of in (50) around the critical temperature . Defining , where denotes a small deviation below the critical threshold, the density of states expands as
which is strictly less than unity for any non-vanishing deformation ().
The condition in (51) signals a fundamental breakdown of the standard semiclassical thermodynamic description, as a well defined microcanonical ensemble strictly requires (and corresponding positive entropy ). This unphysical regime () originates directly from the real marginal deformation parameter . In two dimensional dilaton gravity, the dilaton field () determines the effective gravitational coupling via [30]. Below the critical temperature (), the deformation forces the horizon radius (43) and consequently the dilaton at the horizon (20) into negative values (49). This renders the effective gravitational coupling negative, indicating an inaccessible region where the physical degrees of freedom are suppressed.
Notice that the exclusion of this low-temperature branch is a direct consequence of requiring a positive effective gravitational coupling. Although the density of states in this regime, it remains positive and non-vanishing, unlike the negative spectral densities encountered in certain semiclassical pure-gravity models [31]-[32]. Consequently, this classical unphysical branch does not, by itself, imply that the marginal deformation renders the boundary theory non-unitary [33].
Similarly, the plot of the free energy (Figure 1b) versus temperature reveals a local maximum at the critical temperature . For lower temperatures (), increases monotonically with temperature until it reaches a local peak at . Beyond this critical threshold, turns downward and decreases monotonically as the temperature continues to rise, leading to a physically stable black hole phase. Furthermore, larger deformations cause this local maximum in to shift toward higher temperatures (48). In the undeformed limit (), this local maximum disappears entirely, leaving a free energy profile that decreases monotonically across all temperatures.
To summarize, Figure 1 demonstrates that the presence of deformation gives rise to an unphysical phase at temperatures below the critical value (). In this regime, the entropy is negative and the free energy increases monotonically with rising temperature. Once the temperature exceeds the critical threshold (), we obtain a physical black hole phase characterized by positive entropy and negative free energy.
Komar integral and black hole thermodynamics
In this section, we compute the Komar integral [34] and verify the first law of thermodynamics [35] for real marginally deformed black holes. It is worth noting that the standard construction of conserved charges using the Komar integral does not work for sine-dilaton gravity. Therefore, we employ the Grumiller–Kummer–Vassilevich (GKV) formalism [36]-[38] to obtain the Casimir function for the real deformed sine dilaton gravity (rsDG) black holes. One of the advantages of this formalism is that the Casimir function is a coordinate independent conserved quantity which, for black-hole solutions, is naturally identified with the conserved mass.
In order to compute the Casimir function, we begin with the action for canonical two-dimensional dilaton gravity containing at most second-order derivatives, given by [38]
where is the two-dimensional Ricci scalar, denotes the dilaton, represents the kinetic coupling, is the dilaton potential, and is an overall coupling constant.
Notice that our real marginally deformed sine-dilaton gravity theory [14] exhibits a similar structure. By comparing the canonical action (52) with our rsDG theory [14], we establish the following mappings6
Consequently, the rsDG belongs to the class of dilaton gravity models characterized by the absence of kinetic dilaton coupling.
Following the Grumiller–Kummer–Vassilevich (GKV) formalism, the conserved Casimir function () [36] is defined as
where and denote the light-cone coordinates [38]. Here, the auxiliary functions and are given by
Substituting the mapping (53) into the definitions (55) and performing the explicit integrations, we find that the auxiliary functions simplify to
Again, substituting these auxiliary functions into (54) yields the Casimir function for real deformed sine-dilaton gravity as follows
where we have utilized the geometric relation [38]. Notice that the addition of the marginal deformation parameter () directly modifies the scalar potential , while leaving the kinetic coupling vanishing (). As a result, the exterior derivative of the Casimir function continues to vanish on-shell, i.e., [38]. Furthermore, acts solely as a target-space coupling and introduces no explicit coordinate dependence. Nevertheless, it smoothly deforms the background geometry and the thermodynamic properties of black holes while preserving the exact integrability of the rsDG field equations and the underlying Poisson-algebraic conservation structure of the theory [38].
In order to simplify the Casimir function (57), we first expand the kinetic term as follows
Now using the mapping (53) and black hole solutions (19)–(20) into (58), we obtain
Finally substituting (59) back into the Casimir function (57), we obtain
Notably, the deformation parameter does not explicitly appear in the expression for the Casimir invariant, as expected.
In literature [36, 37, 38], the mass of black hole is defined to be the Casimir invariant up to appropriate normalization. Along the same line, we define the mass of the rsDG black hole as follows
where the overall normalization constant is fixed by requiring that the first law of black-hole mechanics is satisfied identically. This result is consistent with the Arnowitt–Deser–Misner (ADM) energy (or conserved mass measured at spatial infinity) previously obtained for standard sDG as well as the DSSYK result [9]. Although the mass is negative, it remains bounded from below, suggesting that a physical (positive) mass can be obtained via an appropriate shift in the energy spectrum, as discussed below.
The negative sign of the ADM energy () (61) in sine dilaton gravity,
can be naturally understood from the bounded DSSYK spectrum. The spectral parameter ranges within , bounding the energy as [39]
Notice that the spectrum is symmetric around (occurring at ), while and correspond to the lower and upper spectral edges [9], respectively. The entropy is maximum at and degenerate for all other values of [9]. For every value of the entropy, there exists two corresponding values of , one in the range and the other in the range . Therefore, to avoid over counting of states, it is important to consider only one of the ranges which is a counterpart of the other. In other words, the opposite sign of the cosine parametrization can be obtained by the reparametrization , under which [39]. This transformation exchanges the two endpoints of the bounded spectral interval and reverses the sign of the energy parametrization.
Following the convention of the authors in [9], the low-energy sector corresponds to the lower edge. Expanding the energy around this endpoint () yields
implying a minimum energy of the spectrum given by
Next, we define the excitation energy () of the black holes relative to the lower spectral edge, as , we find
where we have used equation (62). This positive excitation energy (66) exhibits the quadratic dependence characteristic of the Schwarzian regime. Thus, the negative ADM energy of sDG is naturally interpreted as the absolute energy of a state within the bounded DSSYK spectrum, whereas the positive Schwarzian energy is obtained by measuring the energy relative to the lower spectral edge. Consequently, the sign of the ADM energy is associated with the parametrization of the black hole horizon, chosen such that the lower edge of the spectrum yields the correct Schwarzian energy [9].
Since the deformation parameter does not affect the Casimir invariant or the conserved mass, it leaves the first law of thermodynamics unchanged. As discussed previously, the first law of black hole thermodynamics relates the variation of the conserved mass () to the Hawking temperature () and the Wald entropy () via [35]
For real deformed sine dilaton gravity, the Hawking temperature (26) and the variation of the Wald entropy (31) are given by
Taking the product directly yields
which precisely reproduces the first law of black hole mechanics. It is worth noting that, although the marginal deformation modifies both the temperature and the entropy differential individually, their non-trivial dependence cancels out exactly in their product.
Deformed JT gravity
In this section, we examine the infrared (IR) or low energy limit of real marginally deformed sine dilaton gravity (rsDG), defined by the action (14). This IR regime is realized by appropriately rescaling both the dilaton field and the marginal deformation parameter , followed by taking the limit . Within this limiting regime, we construct the corresponding black hole solutions and analyze their thermodynamic properties.
To formulate the low energy limit, we begin by redefining the dilaton field and the deformation parameter as follows
where the overline represents the redefine quantities. Substituting these (70) redefinitions into the action (14) and taking the limit , we arrive at9
Notice that this action (71) corresponds to the standard JT gravity [1]-[3] augmented by a linear deformation term , where the subscript “dJT” denotes the deformed JT gravity sector. Furthermore, the boundary terms are given below
On varying the deformed JT gravity action (71) with respect to the space-time metric and dilaton, we obtain the following equations of motion10
These equations (73)–(74) can be solved in the static gauge (18), or obtained directly by expanding the black hole solutions (19)–(20) around and [18], which yields11
where “dbh” denotes the deformed JT gravity black hole solutions. Moreover, the black hole horizon is determined by solving , which gives
It is trivial to check that in the vanishing deformation limit (), we recover the standard result for sine dilaton gravity [9].
Thermodynamics
Having obtained the black hole solutions for deformed JT gravity (75)–(76), we now investigate their thermodynamic properties. In particular, we compute the Hawking temperature, Wald entropy, free energy, and examine the thermodynamic relations among them.
The Hawking temperature for deformed JT black holes is obtained by taking the derivative of with respect to the radial coordinate [28], which yields
Now, following the approach developed for the rsDG theory in Section 4, we compute the thermal observables associated with the deformed JT gravity black holes (75)–(76). Before proceeding further, we express the radial coordinate in terms of the Hawking temperature using the expressions (77)–(78), which yields
Using the definition of Wald entropy (30) () in the low energy regime, we obtain the following expression12
where we use the dilaton value (76) and the relation (79).
Next, we compute the free energy associated with the dJT black hole solutions. To this end, we substitute (75)–(76) into the bulk action (71) and integrate over the time and the radial coordinate, which yields
where represents the radial boundary cut-off. Notice that in the strict JT gravity limit, the physical boundary is located at infinity ().
Similarly, the on-shell boundary contributions (72) are given by
Adding the bulk (81) and boundary (82) contributions yields the renormalized on-shell () action as follows
Finally, substituting equation (83) along with the relation (79) into the definition of renormalized free energy (32) for deformed JT gravity black holes gives
where we eliminate using equation (78).
It is interesting to note that the Wald entropy (80) and free energy (84) satisfy the standard thermodynamic relation
Furthermore, the expressions (80) and (84) indicate the existence of a critical temperature, , at which the Wald entropy vanishes. In the low-temperature regime (), the system enters an unphysical phase, where the entropy becomes negative. At the same time, the free energy increases with rise in temperature, reaching a local maximum at the threshold, as illustrated in Figure 2.
(a) Entropy vs temperature
(b) Free energy vs temperature
Figure 2. Phase stability of dJT black holes for various deformation parameter.
As previously discussed in § 4, this low temperature domain () corresponds to an unphysical number of degrees of freedom () as shown below
where the Wald entropy () for deformed JT black hole solutions is provided in equation (80). Expanding around the critical temperature, i.e. , with is a small parameter, yields
which remains strictly less than unity, confirming the presence of unphysical states.
Conversely, for , the Wald entropy (80) grows linearly with temperature, while the free energy (84) decreases monotonically that ensures a local thermally stable phase (see Figure 2). In this high-temperature regime (), the thermodynamic observables of dJT black holes exhibit either linear (80) or quadratic (84) dependence. In contrast, rsDG black holes display a significant non-linear temperature dependence across both the entropy (44) and free energy (46), as demonstrated in Figure 1. For instance, compared to dJT black holes, the entropy of rsDG black holes increases more rapidly, while the corresponding free energy decreases more gradually with rising temperature. These non-linear corrections reflect the fact that rsDG theory provides an ultraviolet (UV) completion and possesses a richer phase structure.
Conclusion and future directions
In the present work, we have explored the phase stability of sine dilaton gravity under marginal deformations. We began by reviewing the background within the context of Liouville theory and subsequently introduced these deformations into sDG following the approach of [20]. In this framework, we derived the black hole solutions associated with the deformed sDG and examined their thermodynamic phase stability.
Our analysis reveals that the marginal deformation significantly alters the thermodynamic observables, notably introducing a threshold minimum temperature (). Below this critical temperature (), the system encounters an unphysical phase where the Wald entropy becomes negative and the density of states drops below unity, thereby reducing the number of accessible physical states. Conversely, above the critical temperature (), the system exhibits a stable black hole phase.
Furthermore, we computed the Casimir function for the deformed sDG and identified it with the ADM mass. Remarkably, we found that the temperature, entropy, and free energy are modified in such a way that the first law of thermodynamics remains invariant compared to the undeformed theory. Finally, we performed a similar analysis in the IR limit of the deformed theory, which yields standard JT gravity accompanied by the deformation. The black hole solutions obtained in this deformed JT limit and their subsequent thermal properties confirm that the deformation continues to induce a minimum temperature threshold below which all thermodynamic observables become physically inadmissible.
Below we provide a few interesting directions for future extensions.
In this work, our analysis is performed entirely in the bulk, where the marginal deformation introduces a minimum temperature cut-off that modifies the complete thermodynamics of the system. Within the framework of the gauge/gravity duality [4], it would be an interesting direction to investigate similar behavior in the dual one-dimensional deformed DSSYK model. In particular, this deformation is expected to
modify the chord Hilbert space by introducing a cut-off, thereby reducing the number of physically admissible states.
It would also be worthwhile to study the implications of the deformation on various holographic observables, such as the two-point correlation function [40], the boundary stress-energy tensor, and the central charge [41]-[43].
Acknowledgments
PM and DR are indebted to the authorities of Indian Institute of Technology, Roorkee for their unconditional support towards researches in basic sciences. HR would like to thank the authorities of K.R. Mangalam University, Gurugram, for their support. DR also acknowledges the Mathematical Research Impact Centric Support (MATRICS) grant (MTR/2023/000005) received from ANRF, India.
Single marginal deformation
In this section, we consider the case of a single marginal deformation [20] in the context of sine dilaton gravity. In particular, we compute the black hole solutions associated with the complex deformation and examine their thermodynamic properties, such as the Hawking temperature, Wald entropy and the free energy.
We begin with the following action [20]
where the boundary terms are given below
After varying the action (88), we obtain the following equations of motion
where we define the potential as . One can simplify the above equations (90)-(91) in the Euclidean static gauge (18) to find the following black hole solutions
The black hole horizon () can be obtained by solving , yielding
It is trivial to check that in the limit , we recover the undeformed horizon, [9].
Furthermore, using a suitable coordinate transformation [9],
the space-time metric (18) can be recast in a conformally AdS form as
where denotes the horizon radius in coordinate. It is worth noting that although the space-time metric is conformally , it remains a complex quantity due to the complex nature of the horizon radius (). Consequently, the holographic dictionary corresponding to the boundary dDSSYK theory becomes non-trivial.
Next, using (92), we compute the Hawking temperature () for the complex deformed black holes as follows
One can also express the Hawking temperature () given in (97) in terms of and , as discussed earlier in (29). Towards this end, we rewrite as
where we have used the trigonometric identity . Furthermore, using the horizon condition of (92) along with the identity , we find
Now, substituting (99) into (98) simplifies the expression to
Next, taking the square of equation (100) and using the expression (99), one obtains
Finally, plugging (101) into (97), we arrive at the following expression for Hawking temperature
Next, we study the thermal properties associated with the complex deformed black holes. Before proceeding further, we first express the horizon radius (94) in terms of Hawking temperature (102). To begin with, we rewrite (102) as follows
where we have used the trigonometric identity .
Now, substituting (103) in (94), the horizon radius, can be expressed as
Having obtained the black hole solutions (92)-(93) and the horizon radius (104) for complex deformed sine-dilaton gravity, we now aim to study their thermodynamics. To begin with, we first examine the Wald entropy (30) (), which can be obtained by varying the action (88) with respect to the Riemann tensor. This yields
Next, we compute the free energy () for the complex deformed black holes. To this end, we substitute the solutions (92)-(93) into (88) and evaluate the on-shell bulk action () after integrating over the radial and time coordinates, which yields
where we define . Here denotes the boundary cut-off. Similarly, we obtain the boundary contribution, which is given below
Finally, by adding equations (106) and (107), and substituting the horizon radius expression from equation (104) into the free energy definition (32), we obtain
Notice that the Hawking temperature (102), the Wald entropy (105), and the free energy (108) are all complex quantities for the deformation under consideration (88), which renders them physically inadmissible. However, it is interesting to notice that if we rescale the deformation parameter, i.e., and consider only the real part, the Hawking temperature (102) and the Wald entropy (105) become
Notice that the ADM mass of the theory remains unchanged (i.e., ) as discussed in appendix C. One can easily check that equation (109) satisfy the first law of black hole mechanics, i.e., holds identically. Motivated by this observation, to bypass complex thermodynamic observables, in Section 3 we consider a marginal deformation defined as the sum of the deformation in (88) and its complex conjugate, thereby yielding real deformations. As discussed in Section 4, this real deformation produces entirely real thermodynamical observables.
Geometric identity
In this Appendix, we derive the geometric relation , which plays a crucial role in constructing the Casimir invariant for real deformed sine dilaton gravity (rsDG).
In the Grumiller Kummer Vassilevich (GKV) formalism [38], the target space light-cone coordinates () can be expressed in differential form as
where denotes the two dimensional Hodge dual operator, represents the frame two-bein (zweibein) 1-forms, and is the exterior derivative of the scalar dilaton field .
In component form, the above expression (110) simplifies [38] to
where is the two dimensional Levi-Civita symbol13, and is the determinant of the zweibein frame.
Now, we define the norm of the coordinates (111) as follows
Using the two-dimensional identity [44]
one finds
Finally, substituting the relation [38] into (114) yields
Exterior derivative of the Casimir function
In this Appendix, we explicitly verify that the exterior derivative of the Casimir function (57) for real marginally deformed sine dilaton gravity vanishes on-shell i.e., .
The exterior derivative of the Casimir invariant is given by
Differentiating (57) with respect to space-time coordinates yields
To evaluate the above expression (117) on-shell, we take the trace of the metric equation of motion (16), which gives
where we use the two dimensional identity, i.e., .
Substituting the trace condition (118) back into the equation of motion (16) reduces it to the following
Finally, substituting the above relation (119) into the equation (117), we find exact cancellation between the kinetic and potential contributions as shown below
Consequently, holds throughout space-time, implying conservation of the ADM mass given in equation (61). This conservation law is independent of the real marginal deformation parameter .
Deformed AP model
In this section, we present a distinct class of solutions associated with deformed JT gravity (71). In particular, we obtain solutions analogous to the Almheiri-Polchinski black holes in two spacetime dimensions [30]. However, their thermodynamic behavior is identical to the results presented in Section 6, as given in equations (75)–(76).
For completeness, we rewrite the equations of motion for dJT gravity (73)–(74) as
To solve the equations of motion (121)–(122), we adopt the static Euclidean ansatz [30]
where is the Euclidean time, is the radial coordinate, and is the conformal factor. In this gauge, the explicit solutions are given by
where denotes the horizon location and the boundary is located at . Alternatively, employing the coordinate transformation [30]
in the line element (123), we obtain the standard Euclidean Schwarzschild metric given by
This demonstrates that the hyperbolic Almheiri–Polchinski solution (124) and the Schwarzschild solution (126) are related by a coordinate transformation and thus describe identical physical sectors, as further explored in § 6.
References
- [3]J. Maldacena, D. Stanford and Z. Yang, “Conformal symmetry and its breaking in two dimensional Nearly Anti-de-Sitter space,” PTEP 2016 (2016) no.12, 12C104 doi:10.1093/ptep/ptw124 [arXiv:1606.01857 [hep-th]].DOI
- [4]J. M. Maldacena, Adv. Theor. Math. Phys. 2 (1998), 231-252 doi:10.4310/ATMP.1998.v2.n2.a1 [arXiv:hep-th/9711200 [hep-th]].DOI
- [5]J. Polchinski, “Introduction to Gauge/Gravity Duality,” doi:10.1142/9789814350525_0001 [arXiv:1010.6134 [hep-th]].
- [7]J. Maldacena and D. Stanford, “Remarks on the Sachdev-Ye-Kitaev model,” Phys. Rev. D 94 (2016) no.10, 106002 doi:10.1103/PhysRevD.94.106002 [arXiv:1604.07818 [hep-th]].DOI
- [8]S. W. Hawking and D. N. Page, “Thermodynamics of Black Holes in anti-De Sitter Space,” Commun. Math. Phys. 87 (1983), 577 doi:10.1007/BF01208266DOI
- [9]A. Blommaert, T. G. Mertens and J. Papalini, “The dilaton gravity hologram of double-scaled SYK,” [arXiv:2404.03535 [hep-th]].DOI
- [10]A. Blommaert, A. Levine, T. G. Mertens, J. Papalini and K. Parmentier, “An entropic puzzle in periodic dilaton gravity and DSSYK,” [arXiv:2411.16922 [hep-th]].arxiv.org/abs/2411.16922
- [11]H. W. Lin, “The bulk Hilbert space of double scaled SYK,” JHEP 11 (2022), 060 doi:10.1007/JHEP11(2022)060 [arXiv:2208.07032 [hep-th]].DOI
- [12]M. Berkooz and O. Mamroud, “A cordial introduction to double scaled SYK,” Rept. Prog. Phys. 88 (2025) no.3, 036001 doi:10.1088/1361-6633/ada889 [arXiv:2407.09396 [hep-th]].DOI
- [14]A. Blommaert and A. Levine, “Sphere amplitudes and observing the universe’s size,” JHEP 07 (2026), 136 doi:10.1007/JHEP07(2026)136 [arXiv:2505.24633 [hep-th]].DOI
- [15]L. Bossi, L. Griguolo, J. Papalini, L. Russo and D. Seminara, “Sine-dilaton gravity vs double-scaled SYK: exploring one-loop quantum corrections,” JHEP 06 (2025), 152 doi:10.1007/JHEP06(2025)152 [arXiv:2411.15957 [hep-th]].DOI
- [16]S. E. Aguilar-Gutierrez, “Building the holographic dictionary of the DSSYK from chords, complexity & wormholes with matter,” JHEP 10 (2025), 221 doi:10.1007/JHEP10(2025)221 [arXiv:2505.22716 [hep-th]].
- [17]P. Mahapatra, H. Rathi and D. Roychowdhury, “Holographic central charge for sine dilaton gravity,” Phys. Lett. B 869 (2025), 139813 doi:10.1016/j.physletb.2025.139813 [arXiv:2502.13884 [hep-th]].DOI
- [18]P. Mahapatra, H. Rathi and D. Roychowdhury, “Probing sine dilaton gravity with flow central charge,” Phys. Lett. B 880 (2026), 140843 doi:10.1016/j.physletb.2026.140843 [arXiv:2601.17698 [hep-th]].DOI
- [19]S. E. Aguilar-Gutierrez, “Deforming the Double-Scaled SYK and Reaching the Stretched Horizon From Finite Cutoff Holography,” Fortsch. Phys. 74 (2026) no.5, e70112 doi:10.1002/prop.70112 [arXiv:2602.06113 [hep-th]].
- [20]G. Giribet, M. Leston, P. Schmied and B. Sivillotti, “Deforming the double Liouville string,” Phys. Rev. D 111 (2025) no.8, 086022 doi:10.1103/PhysRevD.111.086022 [arXiv:2412.18411 [hep-th]].DOI
- [21]S. Collier, L. Eberhardt, B. Mühlmann and V. A. Rodriguez, “The Virasoro minimal string,” SciPost Phys. 16, no.2, 057 (2024) doi:10.21468/SciPostPhys.16.2.057 [arXiv:2309.10846 [hep-th]].DOI
- [22]H. Verlinde and M. Zhang, “SYK correlators from 2D Liouville-de Sitter gravity,” JHEP 05, 053 (2025) doi:10.1007/JHEP05(2025)053 [arXiv:2402.02584 [hep-th]].DOI
- [23]V. Narovlansky and H. Verlinde, “Double-scaled SYK and de Sitter holography,” JHEP 05, 032 (2025) doi:10.1007/JHEP05(2025)032 [arXiv:2310.16994 [hep-th]].DOI
- [24]Erwin Schrödinger. Space-Time Structure. Cambridge University Press, Cambridge, 1950.
- [25]S. W. Hawking, “Particle Creation by Black Holes,” Commun. Math. Phys. 43 (1975), 199-220 [erratum: Commun. Math. Phys. 46 (1976), 206] doi:10.1007/BF02345020DOI
- [26]R. M. Wald, “Black hole entropy is the Noether charge,” Phys. Rev. D 48 (1993) no.8, R3427-R3431 doi:10.1103/PhysRevD.48.R3427 [arXiv:gr-qc/9307038 [gr-qc]].DOI
- [27]A. Lala, H. Rathi and D. Roychowdhury, “Jackiw-Teitelboim gravity and the models of a Hawking-Page transition for 2D black holes,” Phys. Rev. D 102, no.10, 104024 (2020) doi:10.1103/PhysRevD.102.104024 [arXiv:2005.08018 [hep-th]].DOI
- [28]G. W. Gibbons and S. W. Hawking, “Action Integrals and Partition Functions in Quantum Gravity,” Phys. Rev. D 15 (1977), 2752-2756 doi:10.1103/PhysRevD.15.2752DOI
- [29]H. Rathi and D. Roychowdhury, “Phases of Euclidean wormholes in JT gravity,” Nucl. Phys. B 994, 116315 (2023) doi:10.1016/j.nuclphysb.2023.116315 [arXiv:2111.11279 [hep-th]].DOI
- [30]A. Almheiri and J. Polchinski, “Models of AdS₂ backreaction and holography,” JHEP 11, 014 (2015) doi:10.1007/JHEP11(2015)014 [arXiv:1402.6334 [hep-th]].DOI
- [32]N. Benjamin, H. Ooguri, S. H. Shao and Y. Wang, “Light-cone modular bootstrap and pure gravity,” Phys. Rev. D 100, no.6, 066029 (2019) doi:10.1103/PhysRevD.100.066029 [arXiv:1906.04184 [hep-th]].DOI
- [33]J. L. Cardy, “Operator Content of Two-Dimensional Conformally Invariant Theories,” Nucl. Phys. B 270, 186-204 (1986) doi:10.1016/0550-3213(86)90552-3DOI
- [34]A. Komar, “Covariant conservation laws in general relativity,” Phys. Rev. 113 (1959), 934-936 doi:10.1103/PhysRev.113.934DOI
- [35]J. M. Bardeen, B. Carter and S. W. Hawking, “The Four laws of black hole mechanics,” Commun. Math. Phys. 31 (1973), 161-170 doi:10.1007/BF01645742
- [36]D. Grumiller, R. Ruzziconi and C. Zwikel, “Generalized dilaton gravity in 2d,” SciPost Phys. 12 (2022) no.1, 032 doi:10.21468/SciPostPhys.12.1.032 [arXiv:2109.03266 [hep-th]].DOI
- [37]D. Grumiller and R. Meyer, “Quantum Dilaton Gravity in Two Dimensions with Fermionic Matter,” Class. Quant. Grav. 23 (2006), 6435-6458 doi:10.1088/0264-9381/23/22/021 [arXiv:hep-th/0607030 [hep-th]].DOI
- [38]D. Grumiller, W. Kummer and D. V. Vassilevich, “Dilaton gravity in two-dimensions,” Phys. Rept. 369 (2002), 327-430 doi:10.1016/S0370-1573(02)00267-3 [arXiv:hep-th/0204253 [hep-th]].DOI
- [39]K. Okuyama, JHEP 08 (2025), 181 doi:10.1007/JHEP08(2025)181 [arXiv:2505.08116 [hep-th]].DOI
- [40]M. Goulian and M. Li, “Correlation functions in Liouville theory,” Phys. Rev. Lett. 66 (1991), 2051-2055 doi:10.1103/PhysRevLett.66.2051DOI
- [43]H. Rathi and D. Roychowdhury, “AdS₂ holography and ModMax,” JHEP 07, 026 (2023) doi:10.1007/JHEP07(2023)026 [arXiv:2303.14379 [hep-th]].DOI
- [44]M. Nakahara, Geometry, Topology and Physics, 2nd ed. Boca Raton: Taylor & Francis, 2003.


