WorksPhysics and Astronomy
Crystal orientation dependent spin pumping in Bi0.1Y2.9Fe5O12/Pt interface
Abstract
Ferromagnetic resonance (FMR) based spin pumping is a versatile tool to quantify the spin mixing conductance and spin to charge conversion (S2CC) efficiency of ferromagnet/normal metal (FM/NM) heterostructure. The spin mixing conductance of FM/NM interface can also be tuned by the crystal orientation symmetry of epitaxial FM. In this work, we study the S2CC in epitaxial Bismuth substituted Yttrium Iron Garnet (Bi0.1Y2.9Fe5O12) thin films Bi-YIG (100 nm) interfaced with heavy metal platinum (Pt (8 nm)) deposited by pulsed laser deposition process on different crystal orientation Gd3Ga5O12 (GGG) substrates i.e. [100] and [111]. The crystal structure and surface roughness characterized by X-Ray diffraction and atomic force microscopy measurements establish epitaxial Bi-YIG[100], Bi-YIG[111] orientations and atomically flat surfaces respectively. The S2CC quantification has been realized by two complimentary techniques, (i) FMR-based spin pumping and inverse spin Hall effect (ISHE) at GHz frequency and (ii) temperature dependent spin Seebeck measurements. FMR-ISHE results demonstrate that the [111] oriented Bi-YIG/Pt sample shows significantly higher values of spin mixing conductance ((2.31+-0.23)x10^18 m^-2) and spin Hall angle (0.01+-0.001) as compared to the [100] oriented Bi-YIG/Pt. A longitudinal spin Seebeck measurement reveals that the [111] oriented sample has higher spin Seebeck coefficient (106.40+-10 nV mm-1 K-1). This anisotropic nature of spin mixing conductance and spin Seebeck coefficient in [111] and [100] orientation has been discussed using the magnetic environment elongation along the surface normal or parallel to the growth direction. Our results aid in understanding the role of crystal orientation symmetry in S2CC based spintronics devices.
Introduction
Spin pumping is defined as the transfer of electron spins from a ferromagnet (FM) to a normal metal (NM) in an FM/NM junction under magnetic precession[1, 2, 3]. In general, a time varying magnetization pumps a pure spin current into a NM contact and this idea of spin pumping has been realized by numerous experimental techniques in which excitation sources are varied from GHz to THz time scales[4, 5, 6]. This is also observed with temperature gradient dependent spin Seebeck effect[7, 8, 9]. The efficiency of spin pumping relates to spin angular momentum transfer[10] and spin mixing conductance[11, 12]. The nature of this efficiency is strongly affected by interface characteristics of NM in contact with either ferromagnetic metal (FM)[13] or ferrimagnetic insulator (FMI)[14]. A great deal of theoretical and experimental research has been focused on how to actuate, detect, and regulate the magnetization and spin currents in these systems[15]. One of the most important magnetic materials for spin pumping is Bismuth substituted Yttrium Iron Garnet (Bi-YIG, ). This is primarily due to its long spin-wave propagation length and low Gilbert damping[16, 17, 18, 19, 20, 22] [21]. Several experimental studies on spin pumping have been reported using the Bi-YIG/Pt system[8, 23, 24, 25, 26] because of high spin orbit coupling (SOC) in Pt.
The recent theoretical and experimental works on this subject predict that the spin pumping efficiency strongly depends on the interface cut and orientation of NM and FM structures[27, 28, 29, 30, 31]. This anisotropy has been explained on the basis of local magnetic moment of magnetic ions and generation of crystal field symmetry due to broken rotational symmetry of magnetic atoms[27]. Motivated by these results, we investigate the role of crystal field symmetry in Bi-YIG/Pt multilayers. Here we discuss the tuning of spin pumping by controlling the interface cut dependent growth of 100 nm Bi-YIG film on (GGG) substrates. Our Bi-YIG/Pt heterostructures have been deposited using pulsed laser deposition (PLD) technique where GGG [100] and GGG [111] substrates are used to change the interface cut orientation. We utilize the broadband ferromagnetic resonance (FMR) technique to realize the spin pumping based on the enhancement of Gilbert damping and spin to charge conversion (S2CC) using inverse spin Hall effect (ISHE). The spin mixing conductance and spin Hall angle vary significantly with [111] and [100] orientations. To further corroborate our findings, we have used the complementary technique based on spin Seebeck effect where the variation of spin Seebeck voltage due to interface cut orientation has been observed.
Experimental Technique
The Bi-YIG thin films of thickness 100 nm were grown on [100] and [111] -oriented GGG substrates using PLD technique. Bare grown samples, GGG[100]/Bi-YIG and GGG[111]/Bi-YIG were labeled as Bi-YIG [100] and Bi-YIG [111] respectively. After that, a platinum thin film of 8 nm thickness with deposition rate of was successfully deposited in-situ on bare Bi-YIG using PLD with optimized growth parameters. Platinum deposited samples, GGG[100]/Bi-YIG/Pt, and GGG[111]/Bi-YIG/Pt were labeled as Bi-YIG[100]/Pt and Bi-YIG[111]/Pt, respectively. The size of grown samples is . Before deposition, GGG substrates were appropriately cleaned using acetone and isopropanol. All thin films were deposited at a base vacuum of mbar. We used a 248 nm KrF excimer laser with a 10 Hz pulse rate to ablate the material from the target. During deposition, Oxygen pressure, target to substrate distance, and substrate temperature were all maintained at 0.15 mbar, 5.0 cm, and , respectively. The growth rate of deposited Bi-YIG films was 6 nm/min. The as-grown films were in-situ annealed for 2 hours at in the presence of oxygen (0.15 mbar). After deposition of Bi-YIG film the target to substrate distance was changed to cm and substrate temperature , for deposition of the Pt film, Thickness was measured using atomic force microscopy (AFM) (WITec GmbH, Germany).
FMR-based spin pumping measurements have been carried out in a vector network analyzer spectrometer, where samples are placed in a flip-chip arrangement on a microstrip line with DC magnetic field applied perpendicular to the high-frequency magnetic field () onto the film plane. The dc voltage generated due to ISHE was measured with the help of Keithley 2182 Nanovoltmeter. For spin Seebeck effect measurements, standard longitudinal spin Seebeck effect (LSSE) geometry was used with a temperature gradient formed between the Pt layer and the GGG substrate, and the voltage (perpendicular to an applied magnetic field and temperature gradient) was measured using a Keithley 2182 Nanovoltmeter.
Results and Discussion
Structural, surface morphology and static magnetization study
Bi-YIG crystallizes in cubic structure with the Ia-3d space group. Figure 1 (a)-(Figure 1d) shows the XRD pattern of Bi-YIG and Bi-YIG/Pt bilayers on [100] and [111] cut GGG substrates. XRD patterns shown in Figure 1 (a) and 1 (b) indicate the single-crystalline growth of Bi-YIG and Bi-YIG/Pt thin films. Figure 1 (c) and 1 (d) show the evidence for successful growth of Pt layer on top of bare Bi-YIG films of [100] and [111] orientations. The growth of Pt film is nano-crystalline in nature. The lattice constant, lattice mismatch (with respect to substrate), and lattice volume obtained from XRD data are listed in Table 1. The cubic structure lattice constant is calculated using the formula
| S. No. | Sample | Lattice constant () | Lattice Mismatch (%) | Lattice volume () | Roughness (nm) |
| 1. | Bi-YIG [100] | 12.461 | 0.53 | 1935.15 | 0.36 |
| 2. | Bi-YIG [111] | 12.472 | 0.64 | 1939.80 | 0.33 |
| 3. | Bi-YIG/Pt [100] | 12.402 | 0.39 | 1907.81 | 0.29 |
| 4. | Bi-YIG/Pt [111] | 12.455 | 0.80 | 1932.31 | 0.34 |
Table 1. Lattice constant and roughness obtained from XRD and AFM.
Figure 1.
Where, is the wavelength of Cu-K radiation, is the diffraction angle, and [h, k, l] are the Miller indices of the corresponding XRD peaks.
The lattice mismatch () is calculated using the equation
Here, and indicate the lattice constants of the film and substrate, respectively. The calculated value of lattice constant are tabulated in Table 1 which are consistent with prior findings[16, 32, 33] [21]. The lattice constant slightly increases in the case of [111] as compared to [100] because the distribution of Bi at the dodecahedral site is dependent on the substrate orientation[21,34,35] which leads to a comparatively larger lattice mismatch (or strain). Observed values of lattice mismatch are close to what has been reported earlier[36, 37]. The lattice mismatch of the film plays an important role, a smaller lattice mismatch value can reduce the damping constant of the film[38, 39].
Furthermore, the surface roughness plays an important role in magnetization dynamics due to the generation of two magnon scattering in films with higher roughness. Figure 1 (e)-(Figure 1h) shows room temperature AFM images with root mean square (RMS) roughness. We have observed RMS roughness around 0.35 nm or less for all grown Bi-YIG films which is comparable to previously reported YIG films[18, 40]. We have observed that there RMS roughness remains unchanged for all grown films. Moreover, roughness would be more affected by changes in growth factors than by substrate orientation[18] [21].
VSM magnetization measurements were performed at 300 K with an applied magnetic field parallel to the film plane (in-plane). The GGG substrate's paramagnetic contribution was properly subtracted. Magnetization plots of Bi-YIG thin films for [100] and [111] orientations are shown in Figure 1(i). The schematic of an applied magnetic field direction parallel to the film plane is shown in the inset of Figure 1(i). Measured saturation magnetization () values are 165.60 20.10 mT Gauss for Bi-YIG [100] and 196.20 19.10 mT for Bi-YIG [111]. Saturation magnetization error bars are related to sample volume uncertainty. The observed value of of as grown [100] and [111]-oriented Bi-YIG films are consistent with previous reports[33, 41, 42, 43]. Bismuth doping generally affects the magnetic and mechanical properties of YIG, However, the dependence of saturation magnetization on interface cut is minimal because the magnetization of YIG is induced via a super-exchange interaction at the and site (in Wycoff notation) between non-equivalent ions. Along [111], there is more contribution of ions compared to [100] orientation[21], and Bismuth located at the dodecahedral site distort the tetrahedral and octahedral Fe ions[22].
Figure 1 (j) shows the crystal orientation dependent atomic model of YIG with Yttrium (Y) (red), Fe ‘d site’ (green) and Fe ‘a site’ (blue) atomic position. The interface cut dependent magnetic environment is highly anisotropic in [111] and [100] orientation which is clearly depicted in Figure 1(j). Pt interface with these different magnetic environments may change its spin conversion efficiency[44] which will be discussed in next sections.
Ferromagnetic resonance (FMR) study
FMR measurements are performed at room temperature. Figure 2 (a) and (b) show the FMR absorption spectra of [100] and [111] -oriented thin films, respectively. When Pt is deposited on top of Bi-YIG, the observed FMR absorption spectra shift right in case of [100] and left in case of [111] orientation with respect to bare Bi-YIG film. This shows that Pt deposition moderately affects the effective saturation magnetization in Bi-YIG[111] due to its [111] texture. The FMR data at 10 GHz with its Lorentzian fit is shown in the inset of Figure 2 (a) and 2 (b), and the schematic depicts the direction of the applied DC magnetic field in the film plane. Inset in Figure 2 (a) and (b) shows the enhancement of FMR linewidth in Bi-YIG/Pt samples as compared to bare Bi-YIG samples.
Figure 2.
The corresponding FMR linewidth enhancement is ~0.24 mT in [100] and ~0.50 mT in [111] oriented films. This enhancement in linewidth results from spin pumping. The coupling that transfers angular momentum from Bi-YIG to the metal contributes to the damping due to precession of Bi-YIG magnetization that leads to increasing linewidth. To calculate the increment in Gilbert damping due to Pt deposition, we have measured the FMR data at different resonance frequencies ( GHz-12 GHz) with dc magnetic field applied parallel to film plane. The Lorentzian fitting was used to fit the FMR data and calculate the FMR linewidth () and resonance magnetic field () or different frequencies. From the fitting of Kittel's in-plane equation provided by Eq. (3)[45], the gyromagnetic ratio () and effective magnetization field () were calculated.
Where, is the effective field with anisotropy field . Similarly, Gilbert damping parameter () and inhomogeneous broadening () linewidth were calculated from the fitting of the Landau–Lifshitz–Gilbert equation (LLG) provided by equation 4[45],
Figure 2 (c) and 2 (d) show Kittel and LLG fitted graphs for the [111] orientation, respectively, with an inset showing Kittel and LLG fitted graphs for the [100] orientation.
Table 2 lists the calculated parameters obtained from the FMR study. The measured Gilbert damping () is consistent with thin films used in spin-wave propagation studies[24, 43] [21]. For both orientations [100] and [111], the value of increases when Pt is deposited on top of Bi-YIG films (Table 2). The value of increases significantly in (111) orientation. However, in the case of pure YIG it is reported that Gilbert damping in [100] is more as compared to [111][28]. In our case higher obtained in [111] may be ascribed qualitatively to the presence of Bi ions, which additional induce spin-orbit coupling (SOC)[16, 46, 47] that causes local distortion of Fe so as to affect the magnetic properties as compared with pure YIG[22]. The higher lattice mismatch (strain) in (111) could also be the reason for increased electron scattering leading to higher damping[48].
Figure 1 (j) elucidates how more Fe atoms (i.e., more magnetic environment) and also more yttrium sites are available for the distribution of Bi ions along [111] orientation. This is the cause of higher lattice mismatch in Bi-YIG [111]. These findings account for the higher Gilbert damping and values in the [111] orientation. In conclusion, Bi-YIG/Pt with an orientation of [100] has the lowest damping factor. We note that these are the essential desirable factors used in spintronic devices that need longer propagation lengths for spin waves.
| S. No. | Sample | () | (Oe) | (Oe) |
| 1. | Bi-YIG [100] | (2.970.11) | 25.990.21 | 2124.898.80 |
| 2. | Bi-YIG [111] | (3.620.17) | 26.690.33 | 2241.7012.77 |
| 3. | Bi-YIG/Pt [100] | (3.740.14) | 27.330.29 | 2030.1240.19 |
Table 2. Damping and linewidth parameters obtained from FMR
| 4. | Bi-YIG/Pt [111] |
Table 2 (PDF p. 10).
Inverse spin Hall effect (ISHE) study using FMR based spin pumping and spin Seebeck effect
The induced crystal field anisotropy due to different interfaces strongly affects the tuning of spin mixing conductance because the magnetic ions can result in different spin currents according to its placement in [111] and [100] orientation. It is argued that the crystal field is elongated along the surface normal in [111] orientation and parallel to the surface in [100] orientation[27]. This anisotropic nature of the crystal field gives the highest spin mixing conductance in [111] direction and considerably lower in [100] orientation. At Bi-YIG/Pt interfaces where the spin pumping or the transfer of spin angular momentum occurs, the spin mixing conductance () plays a significant role in transfer of spin angular momentum. Spin pumping-induced damping is measured from the enhancement in the Gilbert damping constant (e.g. due to Pt layer on top of Bi-YIG film ()). This is required for calculating the spin mixing conductance at the Bi-YIG/Pt interface. Table 2 shows the Gilbert damping values of bare Bi-YIG and Pt deposited Bi-YIG samples. The value of as for [100] and for [111] oriented samples are calculated using equation (5)[14]. The observed spin mixing conductance values are consistent with previous reports[14, 24, 49, 50] and shows that it depends on crystal orientation. A larger spin mixing conductance in [111] oriented samples occur that indicates that [111] grown samples have a greater spin-injection efficiency than [100] oriented samples. This is a consequence of [111] oriented sample having a greater Gilbert damping constant enhancement owing to the Pt layer.
Where and are the magnetization and thickness of the Bi-YIG thin film, is the Bohr magneton, is the g-factor of Bi-YIG[22] and is the enhancement in the Gilbert damping constant due to Pt layer on top of Bi-YIG film.
ISHE measurements are carried out at room temperature using FMR technique. In this scheme, a dc magnetic field (H) is applied in the film plane and perpendicular to the sample length. ISHE voltage () is measured along the length of the Pt layer. A resonant rf field (), is also superimposed to cause the uniform precession of the Bi-YIG magnetization. When excited precession occurs at the interface, angular momentum is transferred to the conduction electrons in Pt, resulting in a pure spin current () in Pt. As a result of ISHE, the spin current travels across the Pt perpendicular to the plane and is transformed into charge current (). As a consequence of this, a voltage difference develops between the two ends of the Pt layer that is measured using a Keithley nanovoltmeter. Figure 3 (a) shows the measured dc voltage () at frequency 10 GHz, and Figure 3 (b) shows its Lorentzian fitting[45] with symmetric and anti-symmetric contributions. Figure 3 (c) shows the symmetric contribution of the voltage () extracted from the measured dc voltage (). The inset shows the schematic setup for FMR spin pumping for measurement of ISHE voltage.
!Four-panel plots showing spin-dependent voltage and conductance measurements for [111] and [100] orientations bbox=0.21,0.25,0.85,0.68
Figure 3.
The ISHE voltages[14] given by equation 6 depends on several material parameters
Where is the electron charge, is the spin Hall angle, and denotes the conductivity and thickness of the NM (FM) thin-film respectively, is the spin diffusion length in Pt[16], denotes interfacial spin mixing conductance, is the resonance frequency, is the length of the sample, and in our FMR cavity at power = +15 dBm. The ellipticity of the magnetization precession gives rise to the factor [13, 14].
Values of and are calculated using equations (5)–(7). Calculated values of for [100] orientation is and for [111] orientation is . Figure 3 (d) shows the comparative results of and for [100] and [111] oriented samples. Consequently, the spin current density can be calculated using[14],
is calculated to be for [100] and for [111] orientation. , and was significantly larger in the case of [111] orientation, indicating the enhanced spin orbit contribution and spin transparency in [111] oriented Bi-YIG/Pt bilayer structure, resulting in maximum signal ~76.30 V. For the [100] oriented Bi-YIG/Pt film it was found to be ~46.31 V. Our obtained transport parameters are in agreement with the reported literature values[14, 51, 52, 53, 54, 55, 56, 57, 58] in which order of spin mixing conductance values varies from to . Similarly order of spin Hall angle[57] and spin current density are also in agreement with published data[27, 29, 30, 31]. It shows the effect of crystal orientation on spin mixing conductance. Jia et al. [31] observed no crystal orientation dependent in the pure YIG/Ag system. Cahaya et al.[27], reported that asymmetry of spin mixing conductance depends not only on the density of exposed moments and but also on local point symmetry. The pumped spin-current anisotropy is dependent on the quadrupole moment, which is dependent on the orbital occupancy of interface magnetic atoms. For half-filled shells ions () quadrupole moment is zero. It is necessary to break symmetry, such as via strain or at an interface, to obtain a finite quadrupole moment. From the theoretical explanation given by[27], we conclude that our crystal orientation dependent findings may be due to rotational symmetry breaking in Bi-YIG thin films owing to substrate lattice mismatch. As discussed already, a larger lattice mismatch in [111] is observed compared to [100]. Furthermore, we have used Bi-doped YIG system, where affects the magnetic properties of YIG[22] and also distribution of ions among dodecahedral sites depends on substrate orientation[59, 60, 61] [21]. Figure 1(j) shows the interface cut dependent magnetic environment in [100] and [111] orientation. The interaction of Pt with these varied magnetic environments may affect its spin conversion efficiency. Hence, the enhancement in spin pumping parameters depends on the orientation of crystal growth[27, 29, 30, 31], which supports our experimental findings of ISHE results.
Spin Seebeck effect
The integration of magnetic insulators with Pt promises to usher in several applications of spin current technology to thermoelectric devices. In this regard, we discuss spin Seebeck study on the same films that were studied for inverse Spin Hall Effect previously. We note that the doping of Bi softens the crystal and increases the growth induced anisotropy[22]. The effective SOC for ions is increased by mixing 6p orbitals of Bi ions with O-2p orbitals. Energy transmission between spin and phonon systems is also enhanced by SOC. Thus during spin thermoelectric generation, maximum energy transfer mechanism for the heat simulation of magnetization precession will result in larger spin currents in Bi-YIG films[23]. The spin Seebeck effect measurements were performed in longitudinal spin Seebeck effect (LSSE) geometry. Figure 4 (a) shows the schematic setup for LSSE measurements. Figure 4 (b), 4 (c), and 4 (d) show the comparative results of longitudinal spin Seebeck voltage () as a function of temperature (20 K to 300 K), applied magnetic field (up to Tesla) and temperature gradient (upto 11 K) respectively. At room temperature, the observed spin Seebeck coefficient is nV mm K for [111] and nV mm K for [100] oriented sample. Because these voltages are obtained across various effective resistances, we represent these voltages in their normalized form, i.e. , where is the observed transverse voltage, R and L are the corresponding resistance and distance between contact probes, is the temperature gradient across the sample. The Spin Seebeck effect study indicates the significantly higher values of spin Seebeck coefficient observed in the case of the [111]. These findings from spin Seebeck measurements also provide credence to the higher ISHE voltage generated in the [111] orientation that was seen in FMR spin pumping studies.
According to these experimentally observed ISHE results, the spin mixing conductance of Bi-YIG/Pt bilayers depends on crystal cut and orientation[27]. We find that the spin pumping efficiency of the [111] oriented sample is substantially greater than that of the [100] orientated sample.
Conclusion
We have successfully grown the Bi-YIG(100 nm)/Pt(8 nm) bilayer using pulsed laser deposition technique on top of GGG substrates having [100] and [111] orientations. AFM and XRD characterizations revealed that the deposited thin films are phase pure and have smooth surfaces. FMR based spin pumping results confirm that there are significantly higher values of spin mixing conductance ( three times) and spin Hall angle in the case of the [111] orientated sample compared to [100] oriented sample. This indicates that significantly higher spin current can transfer to the Pt from Bi-YIG [111]. Consequently, the [111] oriented sample has a higher spin pumping efficiency than the [100] oriented sample. From a longitudinal spin Seebeck measurement we note that the [111] orientated sample had a higher (~20 %) spin Seebeck coefficient. In conclusion, the results of inverse spin Hall effect and spin Seebeck experiments show that the fundamental parameters of spin pumping can be tuned effectively by substrate’s orientation.
Acknowledgements
This work is supported by the MHRD-IMPRINT grant, DST (SERB, AMT, and PURSE-II) grant of Govt. of India. Ganesh Gurjar acknowledges CSIR, New Delhi for financial support. We acknowledge AIRF, JNU for access of PPMS facility.
Conflict of interest statement
The authors declare that they have no competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
Data Availability statement
The data that support the findings of this study are available from the corresponding author upon reasonable request.
Figure Captions
Figure 1: XRD patterns of GGG/Bi-YIG/Pt structure, Bi-YIG XRD pattern shown (a) with [100] and (b) [111] orientations, (c) and (d) shows the XRD pattern of Pt film with respect to bare Bi-YIG films on [100] and [111] orientations, (e)-(h) AFM images of Bi-YIG and Bi-YIG/Pt films in [100] and [111] orientations, (i) VSM plot of Bi-YIG film in [100] and [111] orientations (one inset shows the schematic of applied magnetic field direction in the film plane, second inset shows the schematic of sample grown structure), (j) shows the crystal orientation dependent atomic model of YIG with Yttrium (Y) (red), Fe ‘d site’ (green) and Fe ‘a site’ (blue) atomic position.
Figure 2: FMR absorption spectra of Bi-YIG and Bi-YIG/Pt films with (a) [100] and (b) [111] orientation. Inset shows FMR data at 10 GHz with its Lorentzian fit and enhancement in FMR linewidth in Pt deposited sample. The schematic shows the direction of the applied DC magnetic field in the film plane. (c) and (d) show frequency-dependent FMR field () data fitted with Kittel equation and frequency-dependent FMR linewidth () data fitted with LLG equation [111] orientation, respectively, with an inset showing Kittel and LLG fitted graphs for the [100] orientation.
Figure 3: (a) show the measured dc voltage () at frequency 10 GHz, (b) show its Lorentzian fitting with symmetric and anti-symmetric contributions, (c) symmetric contribution of the voltage () extracted from the measured dc voltage () (schematic setup of ISHE measurements), (d) shows the comparative results of spin mixing conductance () and spin Hall angle () for [100] and [111] oriented samples.
Figure 4. (a) Shows the schematic setup of spin Seebeck measurements in LSSE geometry, comparative results of longitudinal spin Seebeck voltage () as a function of (a) ambient temperature, (b) applied magnetic field, (c) temperature gradient, for [100] and [111] oriented samples.
Figure 4 (PDF p. 28).
References
- [1]Tserkovnyak Y, Brataas A and Bauer G E W 2002 Enhanced Gilbert Damping in Thin Ferromagnetic Films Phys. Rev. Lett. 88 117601pubmed.ncbi.nlm.nih.gov/11909427
- [2]Simanek E and Heinrich B 2003 Gilbert damping in magnetic multilayers Phys. Rev. B 67 144418DOI
- [3]Zutic I, Fabian J and Sarma S Das 2004 Spintronics: Fundamentals and applications Rev. Mod. Phys. 76 323
- [4]Brataas A, van Wees B, Klein O, de Loubens G and Viret M 2020 Spin insulatronics Phys. Rep.DOI
- [5]Ivanov B A 2019 Ultrafast spin dynamics and spintronics for ferrimagnets close to the spin compensation point (Review) Low Temp. Phys. 45 935DOI
- [6]Sharma V, Wu W, Bajracharya P, To D Q, Johnson A, Janotti A, Bryant G W, Gundlach L, Jungfleisch M B and Budhani R C 2021 Light and microwave driven spin pumping across FeGaB–BiSb interface Phys. Rev. Mater. 5 124410DOI
- [7]Uchida K, Adachi H, Ota T, Nakayama H, Maekawa S and Saitoh E 2010 Observation of longitudinal spin-Seebeck effect in magnetic insulators Appl. Phys. Lett. 97 172505DOI
- [8]Siegel G, Prestgard M C, Teng S and Tiwari A 2014 Robust longitudinal spin-Seebeck effect in Bi-YIG thin films Sci. Rep. 4 4429DOI
- [9]De A, Ghosh A, Mandal R, Ogale S and Nair S 2020 Temperature Dependence of the Spin Seebeck Effect in a Mixed Valent Manganite Phys. Rev. Lett. 124 17203
- [10]Liu L, Buhrman R A and Ralph D C 2011 Review and Analysis of Measurements of the Spin Hall Effect in Platinumarxiv.org/abs/1111.3702
- [11]Hirsch J E 1999 Spin hall effect Phys. Rev. Lett. 83 1834–7
- [12]Zwierzycki M, Tserkovnyak Y, Kelly P J, Brataas A and Bauer G E W 2005 First-principles study of magnetization relaxation enhancement and spin transfer in thin magnetic films Phys. Rev. B - Condens. Matter Mater. Phys. 71 064420DOI
- [13]Mosendz O, Vlaminck V, Pearson J E, Fradin F Y, Bauer G E W, Bader S D and Hoffmann A 2010 Detection and quantification of inverse spin Hall effect from spin pumping in permalloy/normal metal bilayers Phys. Rev. B 82 214403DOI
- [14]Wang H L, Du C H, Pu Y, Adur R, Hammel P C and Yang F Y 2014 Scaling of spin Hall angle in 3d, 4d, and 5d metals from Y3Fe5O12/metal spin pumping Phys. Rev. Lett. 112 197201DOI
- [15]Jedema F J, Filip A T and Van Wees B J 2001 Electrical spin injection and accumulation at room temperature in an all-metal mesoscopic spin valve Nature 410 345–8
- [16]Kumar R, Samantaray B and Hossain Z 2019 Ferromagnetic resonance studies of strain tuned Bi:YIG films J. Phys. Condens. Matter 31 20–4DOI
- [17]Chang H, Janantha P A P P, Ding J, Liu T, Cline K, Gelfand J N, Li W, Marconi M C and Wu M 2017 Role of damping in spin Seebeck effect in yttrium iron garnet thin films Sci. Adv. 3 e1601614DOI
- [18]Kehlberger A, Richter K, Onbasli M C, Jakob G, Kim D H, Goto T, Ross C A, Götz G, Reiss G, Kuschel T and others 2015 Enhanced magneto-optic Kerr effect and magnetic properties of CeY 2 Fe 5 O 12 epitaxial thin films Phys. Rev. Appl. 4 14008
- [19]Helseth L E, Hansen R W, Il’yashenko E I, Baziljevich M and Johansen T H 2001 Faraday rotation spectra of bismuth-substituted ferrite garnet films with in-plane magnetization Phys. Rev. B 64 174406DOI
- [20]Fakhrul T, Tazlaru S, Beran L, Zhang Y, Veis M and Ross C A A 2019 Magneto-Optical Bi: YIG Films with High Figure of Merit for Nonreciprocal Photonics Adv. Opt. Mater. 7 Gurjar G, Sharma V, Patnaik S and Kuanr B K 2021 Control of magnetization dynamics by substrate orientation in YIG thin films Mater. Res. Express
- [22]Siu G G, Lee C M and Liu Y 2001 Magnons and acoustic phonons in Y3-xBixFe5O12 Phys. Rev. B - Condens. Matter Mater. Phys. 64 944211–9442110DOI
- [23]Imamura M, Asada H, Nishimura R, Yamaguchi K, Tashima D and Kitagawa J 2021 Enhancement of the spin Seebeck effect owing to bismuth substitution in thermoelectric generators fabricated from LPE Bi-substituted YIG films AIP Adv. 11 35143DOI
- [24]Soumah L, Beaulieu N, Qassym L, Carrétero C, Jacquet E, Lebourgeois R, Youssef J Ben, Bortolotti P, Cros V, Anane A, Ben Youssef J, Bortolotti P, Cros V and Anane A 2018 Ultra-low damping insulating magnetic thin films get perpendicular Nat. Commun. 9 1–6DOI
- [25]Iguchi R, Ando K, An T, Saitoh E and Sato T 2012 Evaluation of nonlinear effect in high power spin pumping in polycrystalline bi-substituted yttrium iron garnet (Bi:YIG)/Pt bilayer structure IEEE Trans. Magn. 48 3051–3DOI
- [26]Kirihara A, Uchida K I, Kajiwara Y, Ishida M, Nakamura Y, Manako T, Saitoh E and Yorozu S 2012 Spin-current-driven thermoelectric coating Nat. Mater. 11 686–9DOI
- [27]Cahaya A B, Leon A O and Bauer G E W 2017 Crystal field effects on spin pumping Phys. Rev. B 96 1–11DOI
- [28]Medwal R, Deka A, Vas J V, Duchamp M, Asada H, Gupta S, Fukuma Y and Rawat R S 2021 Facet controlled anisotropic magnons in Y3Fe5O12 thin films Appl. Phys. Lett. 119 162403DOI
- [29]Isasa M, Bedoya-Pinto A, Vélez S, Golmar F, Sanchez F, Hueso L E, Fontcuberta J and Casanova F 2014 Spin Hall magnetoresistance at Pt/CoFe2O4 interfaces and texture effects Appl. Phys. Lett. 105 142402
- [30]Tokaç M, Bunyaev S A, Kakazei G N, Schmool D S, Atkinson D and Hindmarch A T 2015 Interfacial Structure Dependent Spin Mixing Conductance in Cobalt Thin Films Phys. Rev. Lett. 115 1–5pubmed.ncbi.nlm.nih.gov/26274431
- [31]Jia X, Liu K, Xia K and Bauer G E W 2011 Spin transfer torque on magnetic insulators Epl 96 1–6DOI
- [32]Veis M, Liskova E, Antos R, Visnovsky S, Kumar N, Misra D S, Venkataramani N, Prasad S and Krishnan R 2011 Polar and longitudinal magneto-optical spectroscopy of bismuth substituted yttrium iron garnet films grown by pulsed laser deposition Thin Solid Films 519 8041–6DOI
- [33]Bhoi B, Kim B, Kim Y, Kim M-K, Lee J-H and Kim S-K 2018 Stress-induced magnetic properties of PLD-grown high-quality ultrathin YIG films J. Appl. Phys. 123 203902DOI
- [36]Bhoi B, Sahu B, Venkataramani N, Aiyar R and Prasad S 2015 Preparation of low microwave loss YIG thin films by pulsed laser deposition IEEE Trans. Magn. 51 1–4DOI
- [37]Liu X, Yang Q, Zhang D, Wu Y and Zhang H 2019 Magnetic properties of bismuth substituted yttrium iron garnet film with perpendicular magnetic anisotropy AIP Adv. 9 115001
- [38]Yamada K, Kogiso K, Shiota Y, Yamamoto M, Yamaguchi A, Moriyama T, Ono T and Shima M 2020 Dependence of Gilbert damping constant on microstructure in nanocrystalline YIG coatings prepared by co-precipitation and spin-coating on a Si substrate J. Magn. Magn. Mater. 513DOI
- [39]Krysztofik A, Ozouglu S, McMichael R D and Coy E 2021 Effect of strain-induced anisotropy on magnetization dynamics in Y3Fe5O12 films recrystallized on a lattice- mismatched substrate Sci. Rep. 11 1–10
- [40]Onbasli M C, Kehlberger A, Kim D H, Jakob G, Kläui M, Chumak A V., Hillebrands B and Ross C A 2014 Pulsed laser deposition of epitaxial yttrium iron garnet films with low Gilbert damping and bulk-like magnetization APL Mater. 2DOI
- [41]Jalali-Roudsar A A, Denysenkov V P, Khartsev S I, Grishin A M, Adachi N and Okuda T 2001 Microwave and magneto-optic properties of pulsed laser deposited bismuth iron garnet films IEEE Trans. Magn. 37 2454–6
- [42]Tan S, Liu Y, Chen J, Yang L, Lan J and Dai B 2019 Study on lattice constant and magnetic properties of bismuth substituted YIG polycrystal thin film on different substrates prepared by rf magnetron sputtering J. Mater. Sci. Mater. Electron. 30 7410–4DOI
- [43]Lin Y, Jin L, Zhang H, Zhong Z, Yang Q, Rao Y and Li M 2020 Bi-YIG ferrimagnetic insulator nanometer films with large perpendicular magnetic anisotropy and narrow ferromagnetic resonance linewidth J. Magn. Magn. Mater. 496 165886DOI
- [44]Frangou L, Oyarzun S, Auffret S, Vila L, Gambarelli S and Baltz V 2016 Enhanced Spin Pumping Efficiency in Antiferromagnetic IrMn Thin Films around the Magnetic Phase Transition Phys. Rev. Lett. 116 077203
- [45]Bajracharya P, Sharma V, Johnson A and Budhani R C 2022 Resonant precession of magnetization and precession — induced DC voltages in FeGaB thin films J. Phys. D. Appl. Phys. 55DOI
- [46]Yang J, Xu Y, Zhang F and Guillot M 2006 The effects of the spin--orbit coupling strength of the two configurations of rare-earth ions on the magneto-optical properties in garnets J. Phys. Condens. Matter 18 9287DOI
- [47]Jesenska E, Yoshida T, Shinozaki K, Ishibashi T, Beran L, Zahradnik M, Antos R, Kucera M and Veis M 2016 Optical and magneto-optical properties of Bi substituted yttrium iron garnets prepared by metal organic decomposition Opt. Mater. Express 6 1986–97
- [48]Liu T, Chang H, Vlaminck V, Sun Y, Kabatek M, Hoffmann A, Deng L and Wu M 2014 Ferromagnetic resonance of sputtered yttrium iron garnet nanometer films J. Appl. Phys. 115 87–90
- [49]Heinrich B, Burrowes C, Montoya E, Kardasz B, Girt E, Song Y-Y, Sun Y and Wu M 2011 Spin pumping at the magnetic insulator (YIG)/normal metal (Au) interfaces Phys. Rev. Lett. 107 66604pubmed.ncbi.nlm.nih.gov/21902353
- [50]Takahashi R, Iguchi R, Ando K, Nakayama H, Yoshino T and Saitoh E 2012 Electrical determination of spin mixing conductance at metal/insulator interface using inverse spin Hall effect J. Appl. Phys. 111 07C307DOI
- [51]Jungfleisch M B, Lauer V, Neb R, Chumak A V. and Hillebrands B 2013 Improvement of the yttrium iron garnet/platinum interface for spin pumping-based applications Appl. Phys. Lett. 103 022411
- [52]Burrowes C, Heinrich B, Kardasz B, Montoya E A, Girt E, Sun Y, Song Y Y and Wu M 2012 Enhanced spin pumping at yttrium iron garnet/Au interfaces Appl. Phys. Lett. 100 092403DOI
- [53]Kajiwara Y, Harii K, Takahashi S, Ohe J, Uchida K, Mizuguchi M, Umezawa H, Kawai H, Ando K, Takanashi K, Maekawa S, Saitoh E and others 2010 Transmission of electrical signals by spin-wave interconversion in a magnetic insulator Nature 464 262–6DOI
- [54]Hahn C, De Loubens G, Klein O, Viret M, Naletov V V. and Ben Youssef J 2013 Comparative measurements of inverse spin Hall effects and magnetoresistance in YIG/Pt and YIG/Ta Phys. Rev. B - Condens. Matter Mater. Phys. 87 174417
- [55]Nakayama H, Althammer M, Chen Y-T T, Uchida K, Kajiwara Y, Kikuchi D, Ohtani T, Geprags S, Opel M, Takahashi S, Gross R, Bauer G E W, Goennenwein S T B, Saitoh E and others 2013 Spin Hall magnetoresistance induced by a nonequilibrium proximity effect Phys. Rev. Lett. 110 206601
- [56]Vlietstra N, Shan J, Castel V, Van Wees B J and Ben Youssef J 2013 Spin-Hall magnetoresistance in platinum on yttrium iron garnet: Dependence on platinum thickness and in-plane/out-of-plane magnetization Phys. Rev. B - Condens. Matter Mater. Phys. 87 184421DOI
- [57]Qiu Z, Ando K, Uchida K, Kajiwara Y, Takahashi R, Nakayama H, An T, Fujikawa Y and Saitoh E 2013 Spin mixing conductance at a well-controlled platinum/yttrium iron garnet interface Appl. Phys. Lett. 103 092404DOI
- [58]Li M, Zhang D, Jin L, Liu B, Zhong Z, Tang X, Meng H, Yang Q, Zhang L and Zhang H 2021 Interfacial chemical states and recoverable spin pumping in YIG/Pt Appl. Phys. Lett. 118 042406DOI
- [59]Callen H 1971 Growth-induced anisotropy by preferential site ordering in garnet crystals Appl. Phys. Lett. 18 311–3DOI
- [60]LeCraw R C, Luther L C and Gyorgy E M 1982 Growth-induced anisotropy and damping versus temperature in narrow linewidth, 1-μm YIG(Bi, Ca, Si) bubble films J. Appl. Phys. 53 2481–2DOI
- [61]Hansen P and Witter K 1985 Growth-induced uniaxial anisotropy of bismuth-substituted iron-garnet films J. Appl. Phys. 58 454–9DOI