betaFeedback

WorksPhysics and Astronomy

Ballistic transport through 3D flat bands in rhombohedral graphene in an in-plane magnetic field

Abstract

We explore how an in-plane magnetic field reshapes the transmitting channels of a finite slab of rhombohedral multilayer graphene and redistributes the current across its thickness. The two-terminal conductance counts these channels, while the voltage at each surface reflects the relative spectral weights of right- and left-moving states on the contacted layer. In sufficiently thick slabs or at sufficiently strong fields, the nearly flat bulk zeroth Landau level gives rise to a three-dimensional Hall effect with a plateau in the four-terminal Hall resistance.

Introduction and main results: Rhombohedral multilayer graphene (RMG) has emerged as a rich member of the van der Waals family, combining an unusual single-particle band structure with strong interaction effects. In ABC-stacked graphene, the low-energy states are concentrated near the outermost layers, and their dispersion becomes flatter as the number of layers increases. This electronic structure provides a natural route to enhanced correlations and underlies the variety of symmetry-broken and topological phases observed in thin RMG [1, 2, 3, 4, 5, 6, 7, 8].

From a three-dimensional perspective, RMG provides a bulk realization of a nodal-line semimetal [9, 10]. In a minimal model with interlayer hopping only between vertically aligned AA and BB sites in adjacent layers, the bulk bands touch along a Dirac spiral whose projection bounds a disk of radius q0q_0 [11]. See supplemental material (SM) for details. For each in-plane momentum q\mathbf{q}, an NN-layer slab maps onto an SSH chain with alternating hoppings. The chain is topological for q<q0q<q_0, and its end states form the weakly dispersing drumhead bands localized on the two surfaces. Remote hoppings modify the dispersion of these surface bands, which have been observed spectroscopically [12, 13, 14].

An in-plane field B=By^\mathbf{B}=B\hat{\mathbf{y}} turns the nodal spiral into a family of two-dimensional Landau-level (LL) problems in the xx-zz plane, one for each conserved momentum qyq_y. For ∣qy∣<q0\lvert q_y\rvert<q_0, the minimal bulk model has a zeroth Landau level that remains at zero energy across most of this interval, whereas levels with ∣qy∣>q0\lvert q_y\rvert>q_0 disperse with qyq_y. The zeroth level thus lacks the free-particle dispersion along the field characteristic of a conventional three-dimensional metal. Its wavefunctions are localized along the stacking z^\hat{z} direction; as their guiding centers approach the slab boundaries, the states become dispersive. The in-plane-field spectrum and the migration of low-energy states away from the surfaces were established for RMG by Tymczyszyn, Cross, and McCann [15]; related nearly flat levels have been studied in nodal-line semimetals [16, 17].

In this manuscript, we study ballistic transport through RMG slabs in an in-plane magnetic field, calculating the two-terminal conductance, the layer-resolved current, and the voltage between weak voltage probes on opposite surfaces. Figure 1 shows that the field dependence of the conductance varies strongly with carrier density. In some regimes the conductance is nearly field independent, while in others it decreases substantially before approaching a high-field plateau near

Figure 1. The main plot shows G=I/VSDG = I/V_{\mathrm{SD}}, normalized by 4(e2/h)q0Ly/π4(e^2/h)q_0L_y/\pi, for N=51N = 51 at fixed carrier densities n=1.2×1013 cm−2n = 1.2 \times10^{13}\ \mathrm{cm}^{-2} (blue) and n=1.6×1013 cm−2n = 1.6 \times10^{13}\ \mathrm{cm}^{-2} (purple), including Zeeman splitting. The lower-density curve is nearly field independent, whereas the higher-density curve decreases above B≃6 TB \simeq6\ \mathrm{T} and approaches the same high-field plateau. The inset shows the device geometry, with B=By^\mathbf{B} = B\hat{\mathbf{y}} and a source–drain voltage VSDV_{\mathrm{SD}} driving a current II along xx. Panels (a)–(e) correspond to the marked fields on the higher-density curve. The top and middle rows show the orbital dispersions E(qx,0)E(q_x,0) and E(0,qy)E(0,q_y), respectively. Color indicates the mean position ⟨z⟩/zmax⁡\langle z\rangle/z_{\max}, where zmax⁡=Lz/2z_{\max} = L_z/2, and the horizontal dashed lines mark the chemical potential μ(B)\mu(B). The bottom row shows the majority-spin Fermi contours, with orange and green segments denoting right-moving (vx>0v_x > 0) and left-moving (vx<0v_x < 0) states, respectively. The plot beside panel (c) gives the number of right-moving channels NR(qy)N_R(q_y) at B=7 TB = 7\ \mathrm{T}. In panel (e), 2qc2q_c denotes the transverse width of the remaining Fermi contour.

G0=4e2hq0Lyπ.(1)G_0=4\frac{e^2}{h}\frac{q_0L_y}{\pi}. \tag*{(1)}

Here LyL_y is the sample width along the field, and q0Ly/πq_0L_y/\pi counts the transverse momenta in the interval ∣qy∣<q0\lvert q_y\rvert<q_0. This scale corresponds to one right-moving channel per spin and valley for each such momentum.

In the regime we study, the current peaks near the center of the slab at weak fields. As the field increases, the central peak splits into two maxima that move toward opposite surfaces. The surface Hall voltage can vary non-monotonically with magnetic field and approaches the two-terminal source–drain voltage only at high fields, see Figure 3. Thus, conductance, current distribution, and Hall voltage can evolve quite differently in the same slab.

Hall voltage ratio as a function of magnetic field

Figure 3. The inset shows the setup with top and bottom voltage probes defining VHV_H. The main plot shows VH/VSDV_H/V_{\mathrm{SD}} versus BB for N=51N=51 and n=1.6×1013 cm−2n=1.6\times10^{13}\,\mathrm{cm}^{-2}, using the same parameters as the higher-density curve in Figure 1. The ratio vanishes at B=0B=0, varies non-monotonically with field, and saturates at −1-1 for B≳18B\gtrsim18 T. In this regime the currents are peaked near the two surfaces (lower inset), see Sec. S.V.

We now show how the structure of the electronic states across the thickness of the slab shapes its transport response.

Finite-slab model: We consider an NN-layer rhombohedral graphene slab as in the inset of Figure 1 with in-plane magnetic field B=By^\mathbf{B}=B\hat{\mathbf{y}}, described by a vector potential A=Bzx^\mathbf{A}=Bz\hat{\mathbf{x}}. We denote the layer coordinate zℓ=[(N+1)/2−ℓ]dz_\ell=[(N+1)/2-\ell]d with ℓ=1,…,N\ell=1,\ldots,N, and d=3.35A˚d=3.35\text{Å} the interlayer spacing. The drumhead radius is q0=γ1/(ℏv)=(16.9A˚)−1q_0=\gamma_1/(\hbar v)=(16.9\text{Å})^{-1} where γ1\gamma_1 is the leading interlayer hopping and v=106 m/sv=10^6\text{ m/s} is the Dirac velocity.

The full finite-slab Hamiltonian for valley ξ\xi and spin ss is given by

Hξs(q;B)=Hξ(0)(q;B)+Hξ(1)(q;B)+gsμB∣B∣2I2N.(2)H_{\xi s}(\mathbf{q};B)=H_{\xi}^{(0)}(\mathbf{q};B)+H_{\xi}^{(1)}(\mathbf{q};B)+g_s\frac{\mu_B\lvert B\rvert}{2}\mathbb{I}_{2N}. \tag*{(2)}

Here [Hξ(0)]ℓℓ′=δℓℓ′v[ξ(ℏqx+eBzℓ)σx+ℏqyσy]+(γ1δℓℓ′−1+h.c.)\left[H_{\xi}^{(0)}\right]_{\ell\ell'}=\delta_{\ell\ell'}v\left[\xi(\hbar q_x+eBz_\ell)\sigma_x+\hbar q_y\sigma_y\right]+(\gamma_1\delta_{\ell\ell'-1}+\text{h.c.}), with Pauli matrices acting on the AA and BB sites of the graphene lattice, describes the minimal model. The second term Hξ(1)H_{\xi}^{(1)} accounts for remote hoppings; γ2\gamma_2 and γ3\gamma_3 modify the low-energy dispersion and Fermi-contour geometry, while γ4\gamma_4 introduces electron–hole asymmetry. The explicit form of the full Hamiltonian is given in SM [18]. The last term in Eq. (2) describes the Zeeman splitting.

As evident from Hξ(0)H_{\xi}^{(0)}, the field produces a layer-dependent momentum displacement of d/ℓB2d/\ell_B^2 per layer. As displayed in Figure 2, the total momentum shift of the drumhead in units of q0q_0 is αN\alpha N, where α=d/(ℓB2q0)=0.92×10−3B[Tesla]\alpha= d/(\ell_B^2q_0) = 0.92 \times10^{-3}B[\mathrm{Tesla}] is a dimensionless measure of the magnetic field. For each fixed qyq_y within the projected nodal interval, the bulk low-energy theory describes Landau quantization in the xzxz plane. The LL-like bulk functions have energies En=±ℏ/ℓB2∣n∣vvz(qy)E_n = \pm\hbar/\ell_B\sqrt{2|n|}vv_z(q_y) where vz(qy)=vdq02−qy2v_z(q_y) = vd\sqrt{q_0^2-q_y^2}. Their spread along zz is δz(qy)=ℓBvz(qy)/v\delta_z(q_y) = \ell_B\sqrt{v_z(q_y)/v}.

Band dispersion and spatial structure of electronic states

Figure 2. Band dispersion and spatial structure of electronic states in the minimal model for N=51N=51, retaining only the hopping amplitudes γ0\gamma_0 and γ1\gamma_1. (a,b) Dispersion versus qxq_x for qy=0q_y=0, at B=0B=0 and B=30B=30 T, respectively. In (b), color indicates the mean position ⟨z⟩/zmax⁡\langle z\rangle/z_{\max}. (c) Layer-resolved spectral function AΓ(E,qx,qy,zℓ)A_{\Gamma}(E,q_x,q_y,z_\ell) at E=0E=0, for N=51N=51, B=10B=10 T, and valley ξ=1\xi=1, with Lorentzian broadening of 3 meV (see Sec. S.VIII). The three slices correspond to qy/q0=0q_y/q_0=0, 0.395, 0.79. The depletion of zero-energy spectral weight near the slab boundaries reflects hybridization between the bulk Landau states and the surface drumhead states. (d) Schematic tilted cylinder in (qx/q0,qy/q0,z)(q_x/q_0,q_y/q_0,z) space. Its circular bases represent the drumhead bands on opposite surfaces, whose centers are displaced relative to one another by approximately αN\alpha N along qx/q0q_x/q_0. Its lateral surface traces the guiding-center positions of the bulk zeroth Landau levels (see Sec. S.III).

δz(0)=dq0ℓB\delta_z(0) = \sqrt{dq_0}\ell_B where dq0≃0.44\sqrt{d q_0} \simeq0.44. These expressions break down near ∣qy∣=q0|q_y| = q_0, where the two intersections of the nodal spiral with the plane of fixed qyq_y merge (Figure S3). In a finite slab, the Landau levels acquire dispersion in qxq_x as their guiding centers approach either surface. Figure 2(a,b) compares the zero-field and finite-field spectra of the minimal model.

Spectrum restricted to the first few Landau levels

Figure S3. Spectrum restricted to the first few Landau levels displaying the closure of the gap upon increasing qyq_y according to Eq. (17). Low-energy spectrum of the minimal model versus qxq_x for N=101N = 101, By=20B_y = 20 T, and increasing qyq_y. Dashed lines show the bulk Landau-level energies from Eq. (17) at D=0D = 0. The level spacing decreases as qyq_y approaches q0q_0. Near qy=q0q_y = q_0, the two nodal intersections merge and the separate-cone approximation breaks down; the finite-field spectrum retains a nonzero gap.

In our system, level spacings arise from two sources: confinement along the stacking direction, ΔN\Delta_N, and Landau quantization, ΔB\Delta_B. Comparing them determines whether bulk-like Landau levels can form. At B=0B = 0 the level spacing at the nodal radius q=q0q = q_0 defines the finite-size confinement scale ΔN=πγ1N\Delta_N = \frac{\pi\gamma_1}{N}, see Figure 2(a). On the other hand, the first bulk LL energy at qy=0q_y = 0 is given by ΔB=γ12α\Delta_B = \gamma_1\sqrt{2\alpha}, see Figure 2(b). Bulk LLs therefore dedevelop when ΔB≫ΔN\Delta_B \gg\Delta_N, i.e. Lz≫π2δz(0)L_z \gg\frac{\pi}{2}\delta_z(0), namely when the wavefunctions fit well within the bulk of the slab and remain weakly affected by its boundaries.

Conductance: We consider a two-terminal device of width LyL_y (inset of Figure 1), with current flowing along the xx direction between source and drain reservoirs held at chemical potentials μ±eVSD/2\mu\pm eV_{\mathrm{SD}}/2. We calculate the current II and the conductance G=I/VSDG=I/V_{\mathrm{SD}}.

In the ballistic regime, the Landauer–Imry–Büttiker scattering approach relates the conductance to the number of propagating channels at the Fermi energy. For a given transverse momentum qyq_y, each intersection of the dispersion with the Fermi energy at which the group velocity along xx is positive corresponds to a right-moving

channel, contributing e2/he^2/h to the conductance under the assumption of perfect transmission. Denoting the number of such channels by NR,ξs(E,qy;B)N_{R,\xi s}(E,q_y;B), we obtain, at zero temperature and in linear response,

GLy=e2h∑ξ,s∫dqy2πNR,ξs(μ(B),qy;B),(3)\frac{G}{L_y}=\frac{e^2}{h}\sum_{\xi,s}\int\frac{dq_y}{2\pi}N_{R,\xi s}(\mu(B),q_y;B), \tag*{(3)}

where μ(B)\mu(B) is determined by the density n(μ(B),B)n(\mu(B),B) (see Sec. S.IV). An illustrative example of NR(qy)N_R(q_y) is shown in Figure 1(c).

The physical origin of this expression is the cancellation between the group velocity of each propagating state and its one-dimensional density of states. The conductance is therefore determined by the range of transverse momenta supporting propagating channels, weighted by their multiplicity. For a simple Fermi contour, this reduces to its projected width 2qc2q_c along the qyq_y direction [Figure 1(e)]. More generally, a given qyq_y may support several right-moving channels, each of which contributes e2/he^2/h to the conductance.

Consider the high-density conductance curve in Figure 1. At weak fields, the nested Fermi contours give rise to several right-moving channels at the same qyq_y. The total width of the contours projected onto the qyq_y axis, counted with channel multiplicity, changes little up to B≃6B \simeq6 T [Figure 1(a,Figure 1b)]. The conductance is therefore nearly constant even before bulk Landau levels form. Near 6 T, the inner contours reconnect, producing a kink in the conductance. As the resulting pockets shrink, the range of qyq_y supporting multiple right-moving channels narrows and the conductance decreases [Figure 1(c,Figure 1d)]. By 25 T, a single contour of transverse width 2qc,s2q_{c,s} remains for each spin ss, with one right-moving channel per valley at each qyq_y in that interval [Figure 1(e)]. Zeeman splitting makes qc,sq_{c,s} spin dependent, but both widths are close to 2q02q_0, giving G≃G0G \simeq G_0. Throughout the field sweep, the contours are evaluated at the chemical potential μ(B)\mu(B) required to keep the carrier density fixed, which can vary nonmonotonically (Figure S6).

Figure S6. Chemical potential at fixed carrier density in an in-plane magnetic field for N=51N=51. Top: μ(B)\mu(B) for carrier densities n=(12,16,22)×1012 cm−2n=(12,16,22)\times10^{12}\,\mathrm{cm}^{-2}, from left to right, with Zeeman coupling neglected. Bottom: Fermi contours in valley ξ=+1\xi=+1 at the fields marked by matching colors above. Within each panel, all contours are evaluated at the same reference chemical potential, μref=μ(Bref)\mu_{\mathrm{ref}}=\mu(B_{\mathrm{ref}}), with Bref=0,5,12B_{\mathrm{ref}}=0,5,12 T, respectively. The legends give the corresponding carrier densities. Left: increasing BB expands the occupied momentum-space area at fixed μref\mu_{\mathrm{ref}}, consistent with the growing number of low-energy states associated with the emerging zeroth Landau level. Maintaining a fixed density therefore requires a decrease in μ\mu. Center: the inner nested contours reconnect into separate pockets that shrink with increasing field. Their loss of occupied area outweighs the expansion of the outer contour, reducing the density at fixed μref\mu_{\mathrm{ref}} and requiring μ\mu to increase. Right: the small pockets present at 12 T shrink and eventually disappear, while the larger nested contours reconnect into pockets that subsequently shrink. The resulting net loss of occupied area likewise drives an increase in μ\mu at fixed density.

Hall voltage: Eq. (3) counts channels and is blind to where in the stack their current flows. The profile itself, obtained from the layer-resolved current operator (see Sec. S.V), is governed by Lz/δzL_z/\delta_z. For Lz≲δzL_z \lesssim\delta_z the Fermi-level states are hybridized across the slab and the current is peaked at its center; for Lz≫δzL_z \gg\delta_z it splits into two maxima that move toward the surfaces, each penetrating a finite depth (Figure S7). Surface spectral weight and surface current need not coincide, since a layer contributes according to the velocity operator rather than the probability weight. A direct measurement of current profile is experimentally challenging. A more accessible signature of the underlying 3D Hall effect is a four-terminal setup with voltage probes on the top and bottom surfaces (inset of Figure 3). However, as we now show, these probes measure neither the current profile nor the surface weight itself, but the directional selectivity of the surface spectral weight.

Figure S7. Normalized layer-resolved transport-current profiles for the minimal model at fixed magnetic field B=10 TB = 10\,\mathrm{T} and chemical potential μ=10 meV\mu= 10\,\mathrm{meV}, for the slab thicknesses indicated. Each profile is normalized such that ∑ℓj~x(zℓ)=1\sum_\ell\tilde{j}_x(z_\ell) = 1. For thin slabs, the current is broadly distributed and maximal near the center. As the thickness increases, the central maximum broadens and splits into two subsurface maxima near opposite surfaces, while the current in the interior is suppressed. The current-carrying regions retain a finite penetration depth into the slab.

We assume weak coupling between the probes and the outermost layers of the slab as well as equal and incoherent coupling to the pzp_z orbitals. Let wpa=⟨a∣Pp∣a⟩w_{pa}=\langle a|P_p|a\rangle be the weight of the Fermi-level eigenstate aa on the layer contacted by probe p=t,bp=t,b. Using the zero-current condition Ip=0I_p=0, we then find that the layer resolved densities of right- and left-moving states (see Sec. S.VI)

νp±=∑ξ,s∫dqy(2π)2∑a: ±vx,a>0wpaℏ∣vx,a∣(4)\nu_p^\pm=\sum_{\xi,s}\int\frac{\mathrm{d}q_y}{(2\pi)^2}\sum_{a:\,\pm v_{x,a}>0}\frac{w_{pa}}{\hbar\lvert v_{x,a}\rvert} \tag*{(4)}

determine the floating-probe electrochemical potential

μp=νp+μS+νp−μDνp++νp−.\mu_p=\frac{\nu_p^+\mu_S+\nu_p^-\mu_D}{\nu_p^++\nu_p^-}.

Here aa labels the Fermi crossings at fixed qyq_y, including the band index. The probe thus measures a weighted mixture of the source and drain electrochemical potentials. Defining the directional polarization of probe pp, ηp=(νp+−νp−)/(νp++νp−)\eta_p=(\nu_p^+-\nu_p^-)/(\nu_p^++\nu_p^-), the probe chemical potential is μp=μ+ηpeVSD/2\mu_p=\mu+\eta_p eV_{\mathrm{SD}}/2.

The ratio of Hall voltage eVH=μt−μbeV_H=\mu_t-\mu_b and source drain voltage is therefore

VHVSD=ηt−ηb2(5)\frac{V_H}{V_{\mathrm{SD}}}=\frac{\eta_t-\eta_b}{2} \tag*{(5)}

and the Hall resistance is RH=VH/I=(ηt−ηb)/(2G)R_H=V_H/I=(\eta_t-\eta_b)/(2G). At B=0B=0, time-reversal symmetry gives equal spectral weights to right- and left-moving states on each surface. Thus ηt=ηb=0\eta_t=\eta_b=0 and VH=0V_H=0. At strong fields, right- and left-moving states are localized near opposite surfaces. When each probe samples only one propagation direction, one reads the source potential and the other reads the drain potential, giving ∣VH/VSD∣=1\lvert V_H/V_{\mathrm{SD}}\rvert=1 and ∣RH∣=1/G\lvert R_H\rvert=1/G.

At intermediate fields, each probe samples both propagation directions. Its voltage depends on which Fermi crossings are present at the fixed-density chemical potential μ(B)\mu(B) and on the weight wpa/∣vx,a∣w_{pa}/\lvert v_{x,a}\rvert of each crossing on the contacted surface. Changes in the Fermi contours and in these weights can therefore produce a nonmonotonic field dependence of VHV_H.

Figure 3 shows VH/VSDV_H/V_{\mathrm{SD}} for the high-density curve of Figure 1 (N=51N=51, n=1.6×1013 cm−2n=1.6\times10^{13}\,\mathrm{cm}^{-2}). The upward feature near 6 T coincides with the Lifshitz transition in Figure 1. Further features appear near 12 and 16 T, before the ratio saturates at −1-1 for B≳18B\gtrsim18 T, approximately where GG reaches its plateau near G0G_0.

The End Matter examines the Hall conductivity σxz\sigma_{xz}, defined by jx=σxzEzj_x=\sigma_{xz}E_z for a uniform transverse field. Interestingly, it shows that the separation between counterpropagating modes continues to affect σxz\sigma_{xz} even after the four-terminal Hall resistance has saturated.

Discussion: We expect the single-particle framework used above to be adequate as long as μ\mu lies above the zeroth Landau level, where the flat band is fully occupied

and the Fermi-level states are dispersive. The Hartree potential generated by the surface-concentrated density acts as a layer-dependent potential of the displacement-field type (see Sec. S.I). It shifts μ(B)\mu(B), qcq_c, the fields of the Lifshitz transitions and the current profile across the slab, but Eqs. (3)–(5) apply unchanged to the self-consistent bands, and the high-field regime of one chiral pair per qyq_y locked to opposite surfaces, with its plateau in GG and saturation of VHV_H, is a mean-field-stable feature. The same holds for an external displacement field, which tilts the Landau levels along qxq_x (see Eq. (17)) and leaves the picture intact as long as its screened drop across the Fermi-level states is smaller than ΔB\Delta_B.

Inversion symmetry implies that the two valleys contribute with the same sign to GG, VHV_H and σxz\sigma_{xz}. A different behavior emerges for the pseudomagnetic field induced by a strain gradient along the stacking direction. For instance, strain applied to the bottom layer will propagate toward the top, and produce an in-plane pseudofield. A pseudofield preserves time reversal, however, and therefore has opposite sign in the two valleys. The conductance, which only counts channels, survives, but the chirality locking is reversed between KK and K′K', so VHV_H and σxz\sigma_{xz} vanish and the Hall response appears only in the valley channel, VHK=−VHK′V_H^K=-V_H^{K'}.

Once μ\mu enters the zero-energy manifold, at lower density or higher field, the problem changes character: the degeneracy per volume is macroscopic and proportional to BB (see Sec. S.VIII). In the minimal model the zero-energy states lie on the surface of the tilted cylinder of Figure 2(d). Its two bases are the drumhead bands of the two slab surfaces, displaced by ±αNq0/2\pm\alpha Nq_0/2 along qxq_x. Its wall is formed by the zeroth Landau levels, whose guiding center moves across the slab at the rate d⟨z⟩/dqx=−ℓB2d\langle z\rangle/dq_x=-\ell_B^2. For Lz≫δzL_z\gg\delta_z this places zero-energy weight at every depth, and the ratio of surface to bulk zero-energy states is π/2αN\pi/2\alpha N, decreasing with layer number and field. The wall, however, is only partly covered; as the layer-resolved spectral function in Figure 2(c) shows, a Landau branch leaving one drumhead hybridizes with the drumhead of the opposite surface before completing the traversal and moves away from zero energy.

We find that the number of states within each LL per unit volume is

ρ3D=q0π2ℓB2.(6)\rho_{3D}=\frac{q_0}{\pi^2\ell_B^2}. \tag*{(6)}

We include here a factor of 2 due to the positive and negative qxq_x LL branches, see Sec. S.VIII. This should be contrasted with the usual LL degeneracy per unit area ρ2D=1/2πℓB2\rho_{2D}=1/2\pi\ell_B^2. A fascinating question, which we leave for future work, is whether the correlated and topological phases found in thin rhombohedral graphene [1, 3, 5, 6, 7, 8] acquire a three-dimensional analogue in which the flat-band states are not confined to the surfaces.

Acknowledgement: ES acknowledges funding from European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program under grant agreement No 951541 and from the Israel Science Foundation (ISF frant No. 1830/26). RB acknowledges funding from the Israel Science Foundation (ISF Grant No. 2566/26). YO acknowledges funding from ISF Grant No. 1914/24, ISF Quantum Science and Technology program (Grant No. 2074/19), the Minerva Stiftung and the Deutsche Forschungsgemeinschaft (DFG) via CRC/Transregio 183.

END MATTER

In the four-terminal setup of Figure 3, a current IxI_x is driven along the slab and the two surface probes measure a Hall voltage VHV_H. Alternatively, one could calculate, using the standard linear-response Kubo formalism, the current response to a spatially uniform total transverse field Ez(ω)E_z(\omega) and then take ω→0\omega\to0. For a field amplitude ∣VH∣/Lz\lvert V_H\rvert/L_z, one might expect this procedure to reproduce the magnitude of the measured current IxI_x. However, for a finite slab, as we now explain, the two procedures correspond to different properties of the same states.

In the scattering approach leading to Eq. (5), each probe reads an electrochemical potential that depends on the scattering probability to the probe, which is set by the relative weights with which the probe couples to right- and left-moving states. As we now show, the response to a uniform field depends instead on where those states are centered across the slab. At fixed qyq_y, when a single pair of states crosses the Fermi energy, its contribution is proportional to the separation of the two centers along zz. Thus the probes can already read the full source-drain voltage, ∣VH∣=∣VSD∣\lvert V_H\rvert=\lvert V_{SD}\rvert, while that separation is still appreciably smaller than LzL_z, see Figure 4. We note that in the thermodynamic limit, when Lz→∞L_z\to\infty, the current-carrying modes are near the edge, and the quantized value of the Hall conductance for each qyq_y is achieved, in agreement with the scattering approach.

Figure 4. (a,b) Band dispersions E(qx,qy)E(q_x,q_y) in valley ξ=−1\xi=-1 for N=51N=51, n=1.6×1013 cm−2n=1.6\times10^{13}\ \mathrm{cm}^{-2}, and qy=0q_y=0 and 0.9q00.9q_0, respectively. Thin and thick lines correspond to B=3 TB=3\ \mathrm{T} and 27 T27\ \mathrm{T}. Color indicates the mean position ⟨z⟩/zmax⁡\langle z\rangle/z_{\max}. The dotted lines mark the majority-spin effective chemical potential. Triangles mark the corresponding Fermi crossings, point in the direction of propagation, and are colored according to za/zmax⁡z_a/z_{\max}. The labels give SN(qy)S_N(q_y) at each field. (c,d) Positions za/zmax⁡z_a/z_{\max} of the Fermi crossings at momenta qx,aq_{x,a}. At 3 T3\ \mathrm{T}, the multiple crossings give a smaller SNS_N than the single counterpropagating pair at 27 T27\ \mathrm{T}. (e) Field dependence of SN(qy)S_N(q_y) for the majority spin in valley ξ=−1\xi=-1, at qy=0q_y=0 and 0.9q00.9q_0, together with the normalized Hall conductance Lyσxz/G0L_y\sigma_{xz}/G_0, summed over both spins and valleys. Vertical lines mark 33 and 27 T27\ \mathrm{T}. At high fields, Lyσxz/G0≃0.7L_y\sigma_{xz}/G_0\simeq0.7 while VH/VSD=−1V_H/V_{\mathrm{SD}}=-1 (Figure 3). The bulk Hall conductivity remains sensitive to the separation between counterpropagating modes even after the surface probes become fully selective.

For a prescribed uniform field EzE_z, the Kubo formula gives the thickness-averaged current density jˉx=σxzEz\bar{j}_x=\sigma_{xz}E_z, with (SM Sec. S.VII)

σxz=−e2ℏLz∑ξ,s∫d2q(2π)2∑nfn(q)∂zn(q)∂qx=e2ℏ∑ξ,s∫dqy2πSN(qy),(7)\begin{aligned} \sigma_{xz}=-\frac{e^2}{\hbar L_z}\sum_{\xi,s}\int\frac{d^2q}{(2\pi)^2}\sum_n f_n(\mathbf q)\frac{\partial z_n(\mathbf q)}{\partial q_x} \\ &=\frac{e^2}{\hbar}\sum_{\xi,s}\int\frac{dq_y}{2\pi}S_N(q_y), \tag*{(7)} \end{aligned}

where zn=⟨un∣z^∣un⟩z_n=\langle u_n|\hat{z}|u_n\rangle, SN=−Lz−1∑asgn⁡(vx,a)zaS_N=-L_z^{-1}\sum_a\operatorname{sgn}(v_{x,a})z_a, and aa runs over the Fermi crossings at fixed qyq_y, with positions zaz_a and velocities vx,av_{x,a}. The first equality also holds with remote hopping. The second is exact in the minimal model and remains accurate for the remote-hopping parameters considered here, for which the additional boundary term is numerically negligible (SM Sec. S.VII). Physically, the transverse field shifts each state energy by δEn=Ezzn\delta E_n=E_z z_n, changing its velocity along xx by δvx,n=(eEz/ℏ)∂qxzn\delta v_{x,n}=(eE_z/\hbar)\partial_{q_x}z_n. Equation (7) follows by summing the induced currents −efnδvx,n-e f_n\delta v_{x,n} and dividing by the slab thickness, with the occupations fnf_n held at their unperturbed values in the ω→0\omega\to0 limit. Similar expressions were obtained for the Hall conductivity of two-dimensional electron systems [19, 20].

Consider a fixed qyq_y with a single pair of Fermi crossings. For the field orientation shown in Figure 4, the left mover lies near the upper surface and the right mover near the lower surface. If their wavefunctions were centered exactly at the two surfaces, their contribution to Eq. (7) would be

SN(qy)=zL−zRLz=1.S_N(q_y)=\frac{z_L-z_R}{L_z}=1.

In the ideal limit, if one such pair is present for −qc<qy<qc-q_c<q_y<q_c in each spin and valley sector, with no crossings outside this interval, Eq. (7) gives

σxz=e2h∑ξ,s∫−qcqcdqy2π=4e2hqcπ,(8)\sigma_{xz}=\frac{e^2}{h}\sum_{\xi,s}\int_{-q_c}^{q_c}\frac{dq_y}{2\pi}=4\frac{e^2}{h}\frac{q_c}{\pi}, \tag*{(8)}

as expected for decoupled surfaces. However, in a finite slab, the two crossing states are centered a distance of order δz\delta_z inside the surfaces. Their separation is therefore smaller than LzL_z, reducing their contribution to the uniform-field Hall conductivity by a relative amount of order $\delta_z/L_z.

At fixed qyq_y, the slab is a Hall strip in the xzxz plane. For ∣qy∣<q0|q_y|<q_0 and μ\mu in the bulk gap above the zeroth Landau level, the two Dirac cones give a combined Chern number C(qy)=1C(q_y)=1 per spin and valley, fixing the net chirality at each surface. The two-terminal conductance GG counts transmitting right movers with unit weight. The four-terminal Hall voltage in Eq. (5) depends on the relative contributions of right and left movers to the local density of states at each probe. When the two probes couple exclusively to modes arriving from opposite reservoirs, ∣VH∣=∣VSD∣|V_H|=|V_{\mathrm{SD}}| and ∣RH∣=1/G|R_H|=1/G. Neither condition requires the mode centers to lie exactly at the surfaces. If each center lies a distance δz\delta z inside its surface, Eq. (7) gives SN≃1−2δz/LzS_N\simeq1-2\delta z/L_z even after the measured Hall voltage has saturated. In the thermodynamic limit, lim⁡Lz→∞SN=1\lim_{L_z\to\infty}S_N=1, and as noted above, the Hall conductance for each qyq_y is quantized.

Figure 4 shows the Fermi crossings and SNS_N for the slab of Figure 1 at n=1.6×1013 cm−2n=1.6\times10^{13}\ \mathrm{cm}^{-2}. At 3 T3\ \mathrm{T}, μ\mu crosses several subbands near the center of the slab. At 27 T27\ \mathrm{T}, the qy=0q_y=0 slice shown in Figure 4(a) has a single pair of majority-spin crossings in valley ξ=−1\xi=-1, with zL≃+0.74zmax⁡z_L\simeq+0.74z_{\max} and zR≃−0.74zmax⁡z_R\simeq-0.74z_{\max}. Thus SN≃0.74S_N\simeq0.74, with each center about 2.2 nm2.2\ \mathrm{nm} inside its surface. At this field G≃G0G\simeq G_0 and VH/VSD≃−1V_H/V_{\mathrm{SD}}\simeq-1, while Lyσxz/G0≃0.7L_y\sigma_{xz}/G_0\simeq0.7 [Figure 4(e)].

References

Band structure of RMG with in-plane magnetic field

Here, we provide details of the model and band structure and include the effect of the displacement field. We follow the notation of Ref. [15].

The Hamiltonian depends on the in-plane momentum in each layer k∥=(kx,ky)\mathbf{k}_{\parallel}=(k_x,k_y) and is written as a 2N×2N2N\times2N matrix corresponding to NN layers and two atomic sites (AA and BB) per layer. We modify the in plane terms HABH_{AB} of the Hamiltonian by a Peierls substitution which introduces a phase

HAB(k∥)=−γ0∑j=13exp⁡(ik∥⋅(RBj−RA)−ieℏ∫RBjRAA⋅dl)(9)H_{AB}(\mathbf{k}_{\parallel})=-\gamma_0\sum_{j=1}^{3}\exp\left(i\mathbf{k}_{\parallel}\cdot(\mathbf{R}_{B_j}-\mathbf{R}_A)-\frac{ie}{\hbar}\int_{\mathbf{R}_{B_j}}^{\mathbf{R}_A}\mathbf{A}\cdot\mathrm{d}\mathbf{l}\right) \tag*{(9)}

where γ0\gamma_0 is the tight binding parameter for intralayer hopping, RA\mathbf{R}_A is the position of an AA atom, and RBj\mathbf{R}_{B_j} are the positions of the three neighboring BB atoms. The magnetic vector potential A=z(By,−Bx,0)\mathbf{A}=z(B_y,-B_x,0) is chosen to maintain in-plane translation symmetry, where zz is the direction perpendicular to the graphene layers. This gives

HAB(k∥)=−γ0[eikya3−iezaBx3ℏ+2e−ikya23+iezaBx23ℏcos⁡(kxa2+ezaBy2ℏ)].(10)H_{AB}(\mathbf{k}_{\parallel})=-\gamma_0\left[e^{\frac{ik_y a}{\sqrt{3}}-\frac{ie z a B_x}{\sqrt{3}\hbar}}+2e^{-\frac{ik_y a}{2\sqrt{3}}+\frac{ie z a B_x}{2\sqrt{3}\hbar}}\cos\left(\frac{k_xa}{2}+\frac{ezaB_y}{2\hbar}\right)\right]. \tag*{(10)}

Next we shift the in-plane wave vector as q=k∥−Kξ\mathbf{q}=\mathbf{k}_{\parallel}-\mathbf{K}_{\xi} to describe deviations from one of the two valleys Kξ=ξ(4π/3a,0)\mathbf{K}_{\xi}=\xi(4\pi/3a,0) where ξ=±1\xi=\pm1 is the valley index. Then we expand the Hamiltonian for small ∣q∣|\mathbf{q}| and for small ∣B∣|\mathbf{B}| which is valid for ∣qa∣≪1|qa|\ll1 and e∣z∣a∣B∣/ℏ≪1e|z|a|\mathbf{B}|/\hbar\ll1. The resulting Hamiltonian is then

Hξ(0)(q)=(0vπ1†00⋯00vπ10γ10⋯000γ10vπ2†⋯0000vπ20⋯00⋮⋮⋮⋮⋱γ100000γ10vπN†00000vπN0)(11)H_{\xi}^{(0)}(\mathbf{q})= \begin{pmatrix} 0 & v\pi_1^\dagger& 0 & 0 & \cdots& 0 & 0\\ v\pi_1 & 0 & \gamma_1 & 0 & \cdots& 0 & 0\\ 0 & \gamma_1 & 0 & v\pi_2^\dagger& \cdots& 0 & 0\\ 0 & 0 & v\pi_2 & 0 & \cdots& 0 & 0\\ \vdots& \vdots& \vdots& \vdots& \ddots& \gamma_1 & 0\\ 0 & 0 & 0 & 0 & \gamma_1 & 0 & v\pi_N^\dagger\\ 0 & 0 & 0 & 0 & 0 & v\pi_N & 0 \end{pmatrix} \tag*{(11)}

where v=3γ0a/2ℏv=\sqrt{3}\gamma_0a/2\hbar, πℓ(q)=ξ(ℏqx+eByzℓ)+i(ℏqy−eBxzℓ)\pi_\ell(\mathbf{q})=\xi(\hbar q_x+eB_yz_\ell)+i(\hbar q_y-eB_xz_\ell), and

zℓ=(N+12−ℓ)d,(ℓ=1,…,N),(12)z_\ell=\left(\frac{N+1}{2}-\ell\right)d,\qquad(\ell=1,\ldots,N), \tag*{(12)}

is the position of the ℓ\ell-th layer with z=0z=0 at the middle layer. It is convenient to measure energies in units of γ1\gamma_1 and wave vector in units of

q0=γ1vℏ=23aγ1γ0=(16.9A˚)−1.(13)q_0=\frac{\gamma_1}{v\hbar}=\frac{2}{\sqrt{3}a}\frac{\gamma_1}{\gamma_0}=(16.9\mathring{\mathrm{A}})^{-1}. \tag*{(13)}

yielding the dimensionless Hamiltonian

Hξ(0)(q~)γ1=(0π~1†00⋯00π~1010⋯00010π~2†⋯000π~200⋯00⋮⋮⋮⋮⋱10000010π~N†00000π~N0),(14)\frac{H_{\xi}^{(0)}(\tilde{\mathbf{q}})}{\gamma_1}= \begin{pmatrix} 0 & \tilde{\pi}_1^\dagger& 0 & 0 & \cdots& 0 & 0 \\ \tilde{\pi}_1 & 0 & 1 & 0 & \cdots& 0 & 0 \\ 0 & 1 & 0 & \tilde{\pi}_2^\dagger& \cdots& 0 & 0 \\ 0 & \tilde{\pi}_2 & 0 & 0 & \cdots& 0 & 0 \\ \vdots& \vdots& \vdots& \vdots& \ddots& 1 & 0 \\ 0 & 0 & 0 & 0 & 1 & 0 & \tilde{\pi}_N^\dagger\\ 0 & 0 & 0 & 0 & 0 & \tilde{\pi}_N & 0 \end{pmatrix}, \tag*{(14)}

with

π~ℓ=vπℓγ1=ξ[q~x+(N+12−ℓ)αy]+i[q~y−(N+12−ℓ)αx].(15)\tilde{\pi}_{\ell}=\frac{v\pi_{\ell}}{\gamma_1}=\xi\left[\tilde{q}_x+\left(\frac{N+1}{2}-\ell\right)\alpha_y\right]+i\left[\tilde{q}_y-\left(\frac{N+1}{2}-\ell\right)\alpha_x\right]. \tag*{(15)}

Here q~x=qx/q0\tilde{q}_x=q_x/q_0, q~y=qy/q0\tilde{q}_y=q_y/q_0 and we defined the dimensionless magnetic field α⃗=αB⃗∣B⃗∣\vec{\alpha}=\alpha\frac{\vec{B}}{|\vec{B}|} with

α=dℓB2q0=0.86⋅10−3×B[Tesla].(16)\alpha=\frac{d}{\ell_B^2q_0}=0.86\cdot10^{-3}\times B[\mathrm{Tesla}]. \tag*{(16)}

The various parameters that we use are v=106v=10^6 m/s, γ1=0.39\gamma_1=0.39eV, γ2=−0.017\gamma_2=-0.017eV, γ3=0.38\gamma_3=0.38eV, γ4=0.14\gamma_4=0.14eV, a=2.46A˚a=2.46\mathring{\mathrm{A}} for the in-plane lattice constant, and d=3.35A˚d=3.35\mathring{\mathrm{A}} for the interlayer spacing. We next present few plots of the eigenvalues of the Hamiltonian including few extra terms.

The left panel of Figure S1 reproduces a plot in Figure 2a in Ref. [15] for the spectrum versus momentum along the field, qyq_y. Plotting instead the spectrum versus momentum perpendicular to the field qxq_x in the middle panel of Figure S1, shows flat LLs. The color scheme gives the expectation value of zz. We can see a smooth change of color from the top layer (blue) to bottom layer (red).

Three-panel spectrum plots for momentum along and perpendicular to the field, with and without a displacement field

Figure S1. Left panel: reproduction of the plot in Figure 2b of Ref. [15] for the spectrum versus momentum along the field. Middle panel: spectrum versus momentum perpendicular to the field. Dashed lines are Landau levels, Eq. (17). Right panel: inclusion of a displacement field results in tilting of the Landau levels.

In order to see this layer dependence on the zero-th energy level, which is nearly doubly degenerate, it is convenient to add a displacement field to the Hamiltonian

∂Hξ(0)(q)ℓℓ′γ1=Dδℓℓ′N+1−2ℓN−1σ0,\frac{\partial H_{\xi}^{(0)}(\mathbf{q})_{\ell\ell'}}{\gamma_1}=D\delta_{\ell\ell'}\frac{N+1-2\ell}{N-1}\sigma^0,

such that DD is the potential difference between the boundary layers in units of γ1\gamma_1. Using the results derived in the next sections, see Eq. (29) and Eq. (32) for the average zz-coordinate versus qxq_x, qyq_y, the resulting spectrum is

Enτ(qx,qy)≃sgn⁡(n)2α∣n∣[1−(qyq0)2]1/4−D(N−1)α[qxq0−τ1−(qyq0)2].(17)E_{n\tau}(q_x,q_y)\simeq\operatorname{sgn}(n)\sqrt{2\alpha|n|}\left[1-\left(\frac{q_y}{q_0}\right)^2\right]^{1/4}-\frac{D}{(N-1)\alpha}\left[\frac{q_x}{q_0}-\tau\sqrt{1-\left(\frac{q_y}{q_0}\right)^2}\right]. \tag*{(17)}

We can clearly see a tilting of the LLs in the right panel of Figure S1 for n≠0n\ne0. For n=0n=0 we can see that the zero energy state, as function of qxq_x, consists of few segments: two segments are zero-th LLs, which tilt with DD, and other segments which do not tilt but rather change by a constant ±D/2\pm D/2, and correspond to the drumhead surface states. The dashed lines Figure S1 in the middle and right panels correspond to Eq. (17). The horizontal extent of each LL is taken from the relation dzdqx=−ℓB2\frac{dz}{dq_x}=-\ell_B^2 to be −Δqx/2<(qx−τq02−qy2)<Δqx/2-\Delta q_x/2<(q_x-\tau\sqrt{q_0^2-q_y^2})<\Delta q_x/2 where Δqx/q0=(N−1)α\Delta q_x/q_0=(N-1)\alpha.

These Landau levels strongly develop as the number of layers increases, see Figure S2 for an extreme limit in which ΔB≫ΔN\Delta_B\gg\Delta_N.

Two-panel spectrum plots showing developed Landau levels and zero-field drumhead dispersion

Figure S2. Left panel: spectrum versus momentum perpendicular to the field showing clearly developed Landau levels for N=101N = 101 and 10T10\mathrm{T} (20T20\mathrm{T}) where the zero field level spacing ΔN\Delta_N is much smaller than the Landau level gap ΔB\Delta_B. Right panel: the zero field drumhead dispersion.

Finally, the closing of the Landau level gap upon bringing the momentum parallel to the field towards the drumhead radius q0q_0 is shown in Figure S3.

Inclusion of long range hopping parameters: we ask whether the LLs persist when considering the next-longer range hopping parameters in the Hamiltonian. The full Hamiltonian including these terms (γ2,γ3,γ4\gamma_2,\gamma_3,\gamma_4) is

Hξ(0)(q)+Hξ(1)(q)=(A1B3/2C⋯00B3/2†A2B5/2⋯00C†B5/2†A3⋯00⋮⋮⋮⋱BN−3/2C000⋯AN−1BN−1/2000⋯BN−1/2†AN).(18)H_{\xi}^{(0)}(\mathbf{q})+H_{\xi}^{(1)}(\mathbf{q})= \begin{pmatrix} \mathcal{A}_1 & \mathcal{B}_{3/2} & C & \cdots& 0 & 0 \\ \mathcal{B}_{3/2}^{\dagger} & \mathcal{A}_2 & \mathcal{B}_{5/2} & \cdots& 0 & 0 \\ C^{\dagger} & \mathcal{B}_{5/2}^{\dagger} & \mathcal{A}_3 & \cdots& 0 & 0 \\ \vdots& \vdots& \vdots& \ddots& \mathcal{B}_{N-3/2} & C \\ 0 & 0 & 0 & \cdots& \mathcal{A}_{N-1} & \mathcal{B}_{N-1/2} \\ 0 & 0 & 0 & \cdots& \mathcal{B}_{N-1/2}^{\dagger} & \mathcal{A}_N \end{pmatrix}. \tag*{(18)}

where each element represents a 2×22 \times2 matrix,

Aℓ=(0vπℓ†vπℓ0);Bℓ=(−v4πℓ†v3πℓγ1−v4πℓ†);C=(0γ2200);vi=3aγi2ℏ.(19)\mathcal{A}_{\ell} = \begin{pmatrix} 0 & v\pi_{\ell}^{\dagger} \\ v\pi_{\ell} & 0 \end{pmatrix} ;\quad \mathcal{B}_{\ell} = \begin{pmatrix} -v_{4}\pi_{\ell}^{\dagger} & v_{3}\pi_{\ell} \\ \gamma_{1} & -v_{4}\pi_{\ell}^{\dagger} \end{pmatrix} ;\quad \mathcal{C} = \begin{pmatrix} 0 & \frac{\gamma_{2}}{2} \\ 0 & 0 \end{pmatrix} ;\quad v_i = \frac{\sqrt{3}a\gamma_i}{2\hbar}. \tag*{(19)}

Rewriting this Hamiltonian in units of γ1\gamma_1 and versus dimensionless momentum as in Eq. (14), we obtain Hℓ(0)(q~)+Hℓ(1)(q~)γ1\frac{H_{\ell}^{(0)}(\tilde{q})+H_{\ell}^{(1)}(\tilde{q})}{\gamma_1} having a block diagonal form exactly as in Eq. (18) with (Aℓ,Bℓ,Cℓ)→(\mathcal{A}_{\ell}, \mathcal{B}_{\ell}, \mathcal{C}_{\ell}) \to

A~ℓ=(0π~ℓ†π~ℓ0);B~ℓ=(−γ4γ0π~ℓ†γ3γ0π~ℓ1−γ4γ0π~ℓ†);C~=(0γ22γ100).(20)\widetilde{\mathcal{A}}_{\ell} = \begin{pmatrix} 0 & \tilde{\pi}_{\ell}^{\dagger} \\ \tilde{\pi}_{\ell} & 0 \end{pmatrix} ;\quad \widetilde{\mathcal{B}}_{\ell} = \begin{pmatrix} -\frac{\gamma_{4}}{\gamma_{0}}\tilde{\pi}_{\ell}^{\dagger} & \frac{\gamma_{3}}{\gamma_{0}}\tilde{\pi}_{\ell} \\ 1 & -\frac{\gamma_{4}}{\gamma_{0}}\tilde{\pi}_{\ell}^{\dagger} \end{pmatrix} ;\quad \widetilde{\mathcal{C}} = \begin{pmatrix} 0 & \frac{\gamma_{2}}{2\gamma_{1}} \\ 0 & 0 \end{pmatrix}. \tag*{(20)}
Spectrum including $\gamma_{2}$, $\gamma_{3}$ and $\gamma_{4}$

Figure S4. Spectrum including γ2\gamma_{2}, γ3\gamma_{3} and γ4\gamma_{4}. At D=0D = 0 the 3D Landau levels retain nearly flat bulk-like portions while their energies shift due to the extra hopping parameters. Upon increasing DD the LLs tilt. Note a level crossing between D=0.2D = 0.2 and D=0.3D = 0.3.

Semiclassical solution

Here, we derive the 3D LLs from a semiclassical solution of the low-energy Dirac spiral Hamiltonian. Imposing periodic boundary conditions along the zz direction, we introduce a perpendicular wave vector kzk_z, in addition to the small in-plane wave vector q\mathbf{q} measured from the KK point. The bulk Hamiltonian of the minimal model then reduces to a 2×22 \times2 matrix,

HPBC(q,kz)=(0vπ†+γ1eikzdvπ+γ1e−ikzd0),(21)H^{\mathrm{PBC}}(\mathbf{q},k_z)=\begin{pmatrix} 0 & v\pi^\dagger+\gamma_1 e^{ik_zd} \\ v\pi+\gamma_1 e^{-ik_zd} & 0 \end{pmatrix}, \tag*{(21)}

where π=ξℏqx+iℏqy\pi=\xi\hbar q_x+i\hbar q_y is measured with respect to the KK (for ξ=1\xi=1) or K′K' (for ξ=−1\xi=-1) point in the Brillouin zone. This dispersion has the nodal spiral [11] in the 3D Brillouin zone at

ℏv(ξqx−iqy)=−γ1eikzd,(22)\hbar v(\xi q_x-iq_y)=-\gamma_1 e^{ik_zd}, \tag*{(22)}

which corresponds to a circle of radius q0q_0 when projected to the xyxy momentum plane, see Figure S5. Since the magnetic field points along yy, we consider constant-energy contours at fixed qyq_y. Because the Fermi surface is concentrated around the Dirac spiral, we focus on low-energy solutions with ∣qy∣<q0\lvert q_y\rvert<q_0. For a given qyq_y, this fixes two possible values of (qx,kz)(q_x,k_z),

Dirac spiral and its intersection with a plane of fixed $q_y=0.7q_0$

Figure S5. Dirac spiral given by Eq. (22) and its intersection with a plane of fixed qy=0.7q0q_y=0.7q_0. The two points are denoted by τ=±1\tau=\pm1 according to the sign of qxq_x.

qx(sp)=q0τ1−(qy/q0)2,(τ=±1),q_x^{(\mathrm{sp})}=q_0\tau\sqrt{1-(q_y/q_0)^2},\qquad(\tau=\pm1),
kz(sp)=1darg⁡−ξqx(sp)+iqyq0.(23)k_z^{(\mathrm{sp})}=\frac{1}{d}\arg\frac{-\xi q_x^{(\mathrm{sp})}+iq_y}{q_0}. \tag*{(23)}

The two values of τ\tau correspond to the two branches of Landau levels observed in the spectrum. Together with the valley degree of freedom, this yields four points in momentum space where the nodal spiral intersects the fixed kyk_y plane. Near each of these four points (ξ,τ)=(±,±)(\xi,\tau)=(\pm,\pm), we expand the Hamiltonian to linear order in deviations from the Dirac spiral,

ξ=±,qy=fixed,∣qy∣<q0,\xi=\pm,\quad q_y=\text{fixed},\quad\lvert q_y\rvert<q_0,
qx=qx(sp)+κx,q_x=q_x^{(\mathrm{sp})}+\kappa_x,
kz=kz(sp)+κz,(24)k_z=k_z^{(\mathrm{sp})}+\kappa_z, \tag*{(24)}

and obtain

HPBC≅[vξℏκx−γ1qyq0κzd]σx+[γ1ξqx(sp)q0κzd]σy.(25)H^{\mathrm{PBC}}\cong\left[v\xi\hbar\kappa_x-\gamma_1\frac{q_y}{q_0}\kappa_zd\right]\sigma_x+\left[\gamma_1\frac{\xi q_x^{(\mathrm{sp})}}{q_0}\kappa_zd\right]\sigma_y. \tag*{(25)}

In standard notation, this is an anisotropic Dirac model

HPBC=vΠxσx+vzΠzσy,(26)H^{\mathrm{PBC}}=v\Pi_x\sigma_x+v_z\Pi_z\sigma_y, \tag*{(26)}

where vz=23ddγ0v1−(qyq0)2v_z=\frac{2}{\sqrt{3}}\frac{d}{d\gamma_0}v\sqrt{1-\left(\frac{q_y}{q_0}\right)^2} and

Πx=ℏ[ξ(κx+z^ℓB2)−qydκz],Πz=ℏξτκz,(27)\Pi_x=\hbar\left[\xi\left(\kappa_x+\frac{\hat{z}}{\ell_B^2}\right)-q_y d\kappa_z\right],\qquad\Pi_z=\hbar\xi\tau\kappa_z, \tag*{(27)}

satisfying [Πx,Πz]=iτℏeB[\Pi_x,\Pi_z]=i\tau\hbar eB.

Explicit solution

The Hamiltonian Eq. (26) can be solved exactly. We absorb the velocity-anisotropy into the momentum operators Π~x=Πxv/vz\widetilde{\Pi}_x=\Pi_x\sqrt{v/v_z}, Π~z=Πzvz/v\widetilde{\Pi}_z=\Pi_z\sqrt{v_z/v} to obtain HPBC=vvz(Π~xσx+Π~zσy)H^{\mathrm{PBC}}=\sqrt{vv_z}(\widetilde{\Pi}_x\sigma_x+\widetilde{\Pi}_z\sigma_y). Squaring, (HPBC)2=vvz(Π~x2+Π~z2+i[Π~x,Π~z]σz)=vvzℏeB[2a†a+1−τσz](H^{\mathrm{PBC}})^2=vv_z(\widetilde{\Pi}_x^2+\widetilde{\Pi}_z^2+i[\widetilde{\Pi}_x,\widetilde{\Pi}_z]\sigma_z)=vv_z\hbar eB[2a^\dagger a+1-\tau\sigma_z] where we defined ladder operators

a=Π~x+iτΠ~z2ℏeB,a†=Π~x−iτΠ~z2ℏeB,(28)a=\frac{\widetilde{\Pi}_x+i\tau\widetilde{\Pi}_z}{\sqrt{2\hbar eB}},\qquad a^\dagger=\frac{\widetilde{\Pi}_x-i\tau\widetilde{\Pi}_z}{\sqrt{2\hbar eB}}, \tag*{(28)}

satisfying [a,a†]=1[a,a^\dagger]=1. We see that the spectrum is En=sgn⁡(n)2vvzℏeB∣n∣E_n=\operatorname{sgn}(n)\sqrt{2vv_z\hbar eB|n|}, with n=0,±1,±2,…n=0,\pm1,\pm2,\ldots. It has not only a spin degeneracy and a valley degeneracy, but also the additional τ=±1\tau=\pm1 degeneracy resulting from the two intersections of the spiral with a constant qyq_y plane. In units of γ1\gamma_1 as in the plots,

(Enγ1)2=2α∣n∣1−(qyq0)2.(29)\left(\frac{E_n}{\gamma_1}\right)^2=2\alpha|n|\sqrt{1-\left(\frac{q_y}{q_0}\right)^2}. \tag*{(29)}

We can see that the zero-th LL which is a zero eigenvector of the operator 2a†a+1−τσz2a^\dagger a+1-\tau\sigma_z, has τσz=1\tau\sigma_z=1. Namely it is localized in the AA sublattice for τ=1\tau=1 and vice versa. Indeed, as the tilted cylinder in Figure 2(d) shows, the LL at τ=1\tau=1 connects to the top surface, for which the B=0B=0 drumhead states are localized in the AA-sublattice, and vice versa.

From Eq. (27) it is apparent that for a bulk Landau eigenstate within the linearized theory the guiding centers change along zz as

d⟨z⟩dκx=−ℓB2.(30)\frac{d\langle z\rangle}{d\kappa_x}=-\ell_B^2. \tag*{(30)}

zero energy states from SSH model

Here, we follow [15] and map the minimal model of RMG onto an SSH chain. We then use this mapping to obtain the structure of the zero-energy states in (qx,qy,z)(q_x,q_y,z) space.

For zero magnetic field, the spectrum of the 3D RMG in the minimal model can be related to that of the 1D SSH model by treating both components of the in-plane wave vector q\mathbf{q} as parameters. In particular, the alternating hopping amplitudes tt and ww of the SSH model correspond to ℏv∣q∣\hbar v|\mathbf{q}| and γ1\gamma_1, respectively, in RMG.

Ref. [15] generalized this correspondence to the presence of an in-plane magnetic field, resulting in an effective one-dimensional tight-binding model with spatially varying hopping amplitudes. Starting from the Hamiltonian Eq. (11) for NN layers of RMG, we gauge away the phase of the intralayer hopping term on layer ℓ\ell, leaving its magnitude

v∣π(qx,qy,zn)∣=(ℏvqx+evzℓBy)2+(ℏvqy)2≡tℓ,(31)v|\boldsymbol{\pi}(q_x,q_y,z_n)|=\sqrt{(\hbar vq_x+evz_\ell B_y)^2+(\hbar vq_y)^2}\equiv t_\ell, \tag*{(31)}

with Bx=0B_x=0. Treating qxq_x and qyq_y as parameters, the Hamiltonian in Eq. (11) becomes an effective one-dimensional tight-binding model, which generalizes the SSH chain to 2N2N orbitals with hopping parameters t1,w,t2,w,…,tNt_1,w,t_2,w,\ldots,t_N, where w=γ1w=\gamma_1. This model has a uniform intercell hopping ww and spatially modulated intracell hoppings tnt_n on each unit cell.

Edge states of the SSH chain appear in the topological phase when w>t1,tNw > t_1, t_N, corresponding to states localized near the boundaries at z=±d(N−1)/2z = \pm d(N - 1)/2. Solitons of the SSH chain occur at positions zℓz_\ell and momenta (qx,qy)(q_x, q_y) for which tℓ=wt_\ell= w, namely

(ℏvqx+evzℓBy)2+(ℏvqy)2=γ12.(32)(\hbar v q_x + e v z_\ell B_y)^2 + (\hbar v q_y)^2 = \gamma_1^2. \tag*{(32)}

In terms of the radius of the drumhead, q0q_0, the above condition can be rewritten as

(qxq0+α(N+12−ℓ))2+(qyq0)2=1.(33)\left(\frac{q_x}{q_0} + \alpha\left(\frac{N+1}{2} - \ell\right)\right)^2 + \left(\frac{q_y}{q_0}\right)^2 = 1. \tag*{(33)}

This describes a family of circles in momentum space, centered at qx/q0=α(ℓ−(N+1)/2)q_x/q_0 = \alpha(\ell- (N + 1)/2) with radius q0q_0, as shown in Figure 2(d) in the main text. The surface formed by these tilted circles encodes the expectation value of the zz coordinate of zero-energy states as a function of (qx,qy)(q_x, q_y).

The SSH solitons coincide with the zero-th Landau levels found in our semiclassical solution, whose guiding centers move continuously from the bottom layer to the top layer as a function of the momentum qxq_x perpendicular to the magnetic field. The states live on the lateral surface of the tilted cylinder in Figure 2(d). The top and bottom bases of the tilted cylinder correspond to the drumhead states at the top and bottom surfaces.

Two-terminal conductance at fixed carrier density

Here, we derive Eq. (3) of the main text. This equation expresses the conductance in terms of the number of right-moving states at the chemical potential for each value of qyq_y.

We take the sample to be translationally invariant along yy, with periodic boundary conditions over a width LyL_y. The transverse momenta are then quantized in steps Δqy=2π/Ly\Delta q_y = 2\pi/L_y. For fixed valley ξ\xi, spin ss, and transverse momentum qyq_y, the slab is therefore an effective one-dimensional conductor along xx with dispersions Enξs(qx,qy;B)E_{n\xi s}(q_x, q_y; B). Its Fermi points are the solutions of

Enξs(qx,qy;B)=μ.(34)E_{n\xi s}(q_x, q_y; B) = \mu. \tag*{(34)}

A Fermi point is right-moving when

vx,nξs=1ℏ∂Enξs∂qx>0.(35)v_{x,n\xi s} = \frac{1}{\hbar}\frac{\partial E_{n\xi s}}{\partial q_x} > 0. \tag*{(35)}

We denote the number of such crossings at fixed qyq_y by

NR,ξs(μ,qy;B)=∑n∑qx∗Θ[∂Enξs∂qx(qx∗,qy;B)],Enξs(qx∗,qy;B)=μ,(36)N_{R,\xi s}(\mu, q_y; B) = \sum_n \sum_{q_x^*} \Theta\left[\frac{\partial E_{n\xi s}}{\partial q_x}(q_x^*, q_y; B)\right], \qquad E_{n\xi s}(q_x^*, q_y; B) = \mu, \tag*{(36)}

where the sum is over simple Fermi crossings, ∂qxEnξs(qx∗,qy;B)≠0\partial_{q_x} E_{n\xi s}(q_x^*, q_y; B) \ne0.

To see why each right-moving crossing contributes one conductance quantum, make a small change δμS\delta\mu_S in the chemical potential of the source. The resulting current carried by the right-moving states is

δIξs=−eLyδμS∫dqy2π∑n∫dqx2πvx,nξsΘ(vx,nξs)δ(μ−Enξs)=−eLyδμS∫dqy2π∑n,qx∗12πℏΘ(vx,nξs(qx∗,qy))=−ehLyδμS∫dqy2πNR,ξs(μ,qy;B).(37)\begin{aligned} \delta I_{\xi s} &= -eL_y\delta\mu_S \int\frac{\mathrm{d}q_y}{2\pi} \sum_n \int\frac{\mathrm{d}q_x}{2\pi} v_{x,n\xi s}\Theta(v_{x,n\xi s})\delta(\mu-E_{n\xi s}) \\ &= -eL_y\delta\mu_S \int\frac{\mathrm{d}q_y}{2\pi} \sum_{n,q_x^*} \frac{1}{2\pi\hbar}\Theta(v_{x,n\xi s}(q_x^*,q_y)) \\ &= -\frac{e}{h}L_y\delta\mu_S\int\frac{\mathrm{d}q_y}{2\pi}N_{R,\xi s}(\mu,q_y;B). \tag*{(37)} \end{aligned}

In the second line we used

δ(μ−Enξs(qx,qy))=∑qx∗δ(qx−qx∗)∣∂Enξs/∂qx∣qx∗.\delta(\mu-E_{n\xi s}(q_x,q_y)) = \sum_{q_x^*}\frac{\delta(q_x-q_x^*)}{\left|\partial E_{n\xi s}/\partial q_x\right|_{q_x^*}}.

so that the group velocity cancels the one-dimensional density of states. The drain gives the corresponding contribution from left-moving states. For the complete slab spectrum, the occupied intervals at fixed (ξ,s,qy)(\xi,s,q_y) have paired left- and right-moving boundaries, so NL,ξs=NR,ξsN_{L,\xi s}=N_{R,\xi s}. Hence to linear order in the applied bias

I=−ehLy∑ξ,s∫dqy2πNR,ξs(μ,qy;B)(μS−μD).(38)I=-\frac{e}{h}L_y\sum_{\xi,s}\int\frac{dq_y}{2\pi}N_{R,\xi s}(\mu,q_y;B)(\mu_S-\mu_D). \tag*{(38)}

Using μS−μD=−eVSD\mu_S-\mu_D=-eV_{\mathrm{SD}}, the zero-temperature ballistic conductance is therefore given by Eq. (3) which assumes ideal contacts and unit transmission.

When a field sweep is performed at fixed carrier density n0n_0, the chemical potential is determined by n(μ(B),B)=n0n(\mu(B),B)=n_0 where

n(μ,B)=∑ξ,s∫d2q(2π)2[∑α=12Nf(Eαξs(q,B)−μ)−N].(39)n(\mu,B)=\sum_{\xi,s}\int\frac{d^2q}{(2\pi)^2}\left[\sum_{\alpha=1}^{2N}f(E_{\alpha\xi s}(q,B)-\mu)-N\right]. \tag*{(39)}

Here nn is the excess sheet density relative to half filling, and the subtraction of NN removes the half-filled reference occupation in each spin–valley sector. At zero temperature, f(E−μ)=Θ(μ−E)f(E-\mu)=\Theta(\mu-E). Examples are shown in Figure S6. We emphasize the non-monotonic behavior of μ(B)\mu(B). To explain the non-monotonicity we use

(∂μ∂B)n=−(∂n/∂B)μ(∂n/∂μ)B.(40)\left(\frac{\partial\mu}{\partial B}\right)_n=-\frac{(\partial n/\partial B)_\mu}{(\partial n/\partial\mu)_B}. \tag*{(40)}

The denominator is the thermodynamic density of states and is positive whenever the system is compressible. The numerator, however, has no fixed sign because the magnetic field reconstructs the spectrum. At zero temperature,

(∂n∂B)μ=−∑ξ,s,n∫d2q(2π)2δ[μ−Enξs(q;B)]∂Enξs(q,B)∂B.(41)\left(\frac{\partial n}{\partial B}\right)_\mu=-\sum_{\xi,s,n}\int\frac{d^2q}{(2\pi)^2}\delta[\mu-E_{n\xi s}(q;B)]\frac{\partial E_{n\xi s}(q,B)}{\partial B}. \tag*{(41)}

It is therefore determined by a Fermi-surface average of the field-induced energy shifts, which may have either sign. If the field shifts states downward through the fixed chemical potential or enlarges the occupied Fermi-sea area, then (∂n/∂B)μ>0(\partial n/\partial B)_\mu>0 and μ(B)\mu(B) decreases at fixed density. Conversely, upward spectral shifts or shrinking Fermi pockets give (∂n/∂B)μ<0(\partial n/\partial B)_\mu<0 and an increasing μ(B)\mu(B). Different bands and regions of the Fermi contours can contribute with opposite signs, and their changing balance produces the nonmonotonic dependence of μ\mu on BB.

Layer-resolved current operator

Here, we present calculations of the layer-resolved current and show that, while weak-field finite slabs can carry a current peaked in the interior, field-induced redistribution can produce a current distribution concentrated near the surfaces.

Let PℓP_\ell denote the projector onto layer ℓ\ell. In the basis (A1,B1,A2,B2,…,AN,BN)(A_1,B_1,A_2,B_2,\ldots,A_N,B_N), it is given by Pℓ=∣Aℓ⟩⟨Aℓ∣+∣Bℓ⟩⟨Bℓ∣P_\ell=|A_\ell\rangle\langle A_\ell|+|B_\ell\rangle\langle B_\ell|. The projectors satisfy ∑ℓ=1NPℓ=1\sum_{\ell=1}^{N}P_\ell=\mathbb{1}. The total single-particle current operator along xx is J^x=−ev^x\hat{J}_x=-e\hat{v}_x, where v^x=1ℏ∂H(q)∂qx\hat{v}_x=\frac{1}{\hbar}\frac{\partial H(\mathbf{q})}{\partial q_x}. We define the current associated with layer ℓ\ell as

J^x(ℓ)=−e2{Pℓ,v^x}.(42)\hat{J}^{(\ell)}_x=-\frac{e}{2}\{P_\ell,\hat{v}_x\}. \tag*{(42)}

The anticommutator ensures that the layer-resolved current operator is Hermitian even when PℓP_\ell and v^x\hat{v}_x do not commute. With this definition the layer currents add exactly to the total current

∑ℓ=1NJ^x(ℓ)=−e2∑ℓ(Pℓv^x+v^xPℓ)=−e2(v^x+v^x)=−ev^x=J^x.(43)\sum_{\ell=1}^{N}\hat{J}^{(\ell)}_x=-\frac{e}{2}\sum_\ell(P_\ell\hat{v}_x+\hat{v}_xP_\ell)=-\frac{e}{2}(\hat{v}_x+\hat{v}_x)=-e\hat{v}_x=\hat{J}_x. \tag*{(43)}

For the minimal rhombohedral graphene model considered here, the qxq_x dependence resides in the intralayer Dirac Hamiltonians, whereas the dominant interlayer hopping γ1\gamma_1 is independent of qxq_x. Consequently, v^x\hat{v}_x is diagonal in layer space and [Pℓ,v^x]=0[P_\ell,\hat{v}_x]=0. Eq. (42) therefore simplifies to J^x(ℓ)=−ePℓv^xPℓ\hat{J}^{(\ell)}_x=-eP_\ell\hat{v}_xP_\ell.

For an eigenstate ∣nq⟩|n\mathbf{q}\rangle, we define

Jx,nq(ℓ)=⟨nq∣J^x(ℓ)∣nq⟩.(44)J_{x,n\mathbf{q}}^{(\ell)}=\langle n\mathbf{q}|\hat{J}_{x}^{(\ell)}|n\mathbf{q}\rangle. \tag*{(44)}

Summing over layers gives ∑ℓJx,nq(ℓ)=−e⟨nq∣v^x∣nq⟩=−eℏ∂En(q)∂qx=−evx,nq\sum_{\ell}J_{x,n\mathbf{q}}^{(\ell)}=-e\langle n\mathbf{q}|\hat{v}_{x}|n\mathbf{q}\rangle=-\frac{e}{\hbar}\frac{\partial E_{n}(\mathbf{q})}{\partial q_{x}}=-ev_{x,n\mathbf{q}}, where the second equality follows from the Hellmann–Feynman theorem.

In the Landauer–Imry–Büttiker geometry, the two reservoirs are attached to opposite xx faces and have electrochemical potentials μL−μR=eV\mu_{L}-\mu_{R}=eV. For an ideal ballistic system, right-moving states are populated by the left reservoir and left-moving states by the right reservoir,

fnqLB={fL(Enq),vx,nq>0,fR(Enq),vx,nq<0.(45)f_{n\mathbf{q}}^{\mathrm{LB}}= \begin{cases} f_{L}(E_{n\mathbf{q}}), & v_{x,n\mathbf{q}}>0,\\ f_{R}(E_{n\mathbf{q}}), & v_{x,n\mathbf{q}}<0. \end{cases} \tag*{(45)}

The layer-resolved current density is therefore

jx,totLB(zℓ)=1A∑n,qfnqLBJx,nq(ℓ),(46)j_{x,\mathrm{tot}}^{\mathrm{LB}}(z_{\ell})=\frac{1}{A}\sum_{n,\mathbf{q}}f_{n\mathbf{q}}^{\mathrm{LB}}J_{x,n\mathbf{q}}^{(\ell)}, \tag*{(46)}

where A=LxLyA=L_{x}L_{y} is the in-plane area. For a symmetrically applied small bias, μL=μ+eV2\mu_{L}=\mu+\frac{eV}{2}, μR=μ−eV2\mu_{R}=\mu-\frac{eV}{2}, the linear-response change in occupation is

δfnqLB=−∂f∂EeV2sgn⁡(vx,nq).(47)\delta f_{n\mathbf{q}}^{\mathrm{LB}}=-\frac{\partial f}{\partial E}\frac{eV}{2}\operatorname{sgn}(v_{x,n\mathbf{q}}). \tag*{(47)}

At zero temperature −∂f∂E=δ(E−μ)-\frac{\partial f}{\partial E}=\delta(E-\mu), and the current induced to linear order in the applied bias is

jxLB(zℓ)=eV2A∑n,qδ(Enq−μ)sgn⁡(vx,nq)Jx,nq(ℓ).(48)j_{x}^{\mathrm{LB}}(z_{\ell})=\frac{eV}{2A}\sum_{n,\mathbf{q}}\delta(E_{n\mathbf{q}}-\mu)\operatorname{sgn}(v_{x,n\mathbf{q}})J_{x,n\mathbf{q}}^{(\ell)}. \tag*{(48)}

Thus the Landauer–Imry–Büttiker transport-current profile is determined by the propagating states at the Fermi energy.

We now examine how the Landauer-Imry-Büttiker transport current is distributed across the thickness of the slab. To compare slabs with different numbers of layers, we define the normalized layer-resolved profile

j~xLB(zℓ)=jxLB(zℓ)∑ℓ′=1NjxLB(zℓ′).(49)\tilde{j}_{x}^{\mathrm{LB}}(z_{\ell})=\frac{j_{x}^{\mathrm{LB}}(z_{\ell})}{\sum_{\ell'=1}^{N}j_{x}^{\mathrm{LB}}(z_{\ell'})}. \tag*{(49)}

Figure S7 shows j~xLB(zℓ)\tilde{j}_{x}^{\mathrm{LB}}(z_{\ell}) for several slab thicknesses for B=10 TB=10\,\mathrm{T}. The current distribution undergoes a pronounced crossover as NN increases. For the thinnest slabs, such as N=11N=11 and N=21N=21, the current is broadly distributed across the slab and is maximal near its center. At intermediate thickness, the profile first broadens and then changes its shape. Around N=41N=41, it remains approximately center-peaked, whereas by N=61N=61 the central maximum has split into two off-center maxima. Upon increasing NN further, these maxima move toward the opposite surfaces and the current carried through the central region is progressively suppressed. For N=81N=81, and 151151, most of the transport current is concentrated in two well-separated regions associated with the top and bottom surfaces. Nevertheless the two peaks in current are not restricted to the outermost layers.

Surface Hall voltage

We derive the equations describing the 4-terminal response. A weak voltage probe samples states incident from the source and drain without appreciably perturbing their occupations. For equal incoherent coupling to the two orbitals of the outermost layers, we define

PT=∣A1⟩⟨A1∣+∣B1⟩⟨B1∣,P_T = \lvert A_1\rangle\langle A_1\rvert+ \lvert B_1\rangle\langle B_1\rvert,
PB=∣AN⟩⟨AN∣+∣BN⟩⟨BN∣.P_B = \lvert A_N\rangle\langle A_N\rvert+ \lvert B_N\rangle\langle B_N\rvert.

The weight of a slab eigenstate on the contacted orbitals is

wpnξs(q)=⟨nξs,q∣Pp∣nξs,q⟩,p=T,B.w_{pn\xi s}(q) = \langle n\xi s,q \rvert P_p \lvert n\xi s,q\rangle,\qquad p = T,B.

At zero temperature, the directional local densities of states are

νp±=∑ξ,s,n∫d2q(2π)2wpnξs(q) Θ(±vx,nξs) δ[μ−Enξs(q)](50)\nu_p^\pm= \sum_{\xi,s,n}\int\frac{d^2q}{(2\pi)^2} w_{pn\xi s}(q)\,\Theta(\pm v_{x,n\xi s})\,\delta[\mu-E_{n\xi s}(q)] \tag*{(50)}

At fixed qyq_y, the delta function can be expanded over simple Fermi crossings,

δ[μ−Enξs(qx,qy)]=∑a∈nδ(qx−qx,a)ℏ∣vx,a∣.(51)\delta[\mu-E_{n\xi s}(q_x,q_y)] = \sum_{a\in n}\frac{\delta(q_x-q_{x,a})}{\hbar\lvert v_{x,a}\rvert}. \tag*{(51)}

Integration over qxq_x yields

νp±=∑ξ,s∫dqy(2π)2∑a: ±vx,a>0wpaℏ∣vx,a∣.(52)\nu_p^\pm= \sum_{\xi,s}\int\frac{dq_y}{(2\pi)^2}\sum_{a:\,\pm v_{x,a}>0}\frac{w_{pa}}{\hbar\lvert v_{x,a}\rvert}. \tag*{(52)}

Let the probe be at chemical potential μp\mu_p. In the ballistic limit, right movers are populated by the source and left movers by the drain. To leading order in the probe coupling and in the applied bias, the tunneling current is

Ip=Cp[νp+(μp−μS)+νp−(μp−μD)],(53)I_p = C_p\left[\nu_p^+(\mu_p-\mu_S)+\nu_p^-(\mu_p-\mu_D)\right], \tag*{(53)}

where Cp>0C_p>0 contains a common tunneling prefactor. The floating-probe condition Ip=0I_p=0 gives

μp=νp+μS+νp−μDνp++νp−;(54)\mu_p=\frac{\nu_p^+\mu_S+\nu_p^-\mu_D}{\nu_p^++\nu_p^-}; \tag*{(54)}

the chemical potential of the probe is the average of the source and drain chemical potentials weighted by the directional densities. Writing μS,D=μˉ±eVSD/2\mu_{S,D}=\bar{\mu}\pm eV_{\mathrm{SD}}/2, we obtain

μp=μˉ+eVSD2ηp,withηp=νp+−νp−νp++νp−,(55)\mu_p=\bar{\mu}+\frac{eV_{\mathrm{SD}}}{2}\eta_p,\qquad\text{with}\qquad\eta_p=\frac{\nu_p^+-\nu_p^-}{\nu_p^++\nu_p^-}, \tag*{(55)}

where −1≤ηp≤1-1\leq\eta_p\leq1 describes the difference between the coupling of probe pp to right movers and left movers. Subtracting the top and bottom probe potentials and using I=GVSDI=GV_{\mathrm{SD}} and eVH=μT−μBeV_H=\mu_T-\mu_B gives

VHVSD=ηT−ηB2,RH=1GηT−ηB2.(56)\frac{V_H}{V_{\mathrm{SD}}}=\frac{\eta_T-\eta_B}{2},\qquad R_H=\frac{1}{G}\frac{\eta_T-\eta_B}{2}. \tag*{(56)}

When the top and bottom probes couple exclusively to oppositely propagating states, ηT=−ηB=±1\eta_T=-\eta_B=\pm1, then ∣VH/VSD∣=1|V_H/V_{\mathrm{SD}}|=1 and ∣RH∣=1/G|R_H|=1/G.

Bulk Hall conductivity

We provide a detailed derivation of Eq. (7) in the main text from the Kubo formula for the transverse conductivity, in terms of the exact eigenstates of a finite rhombohedral slab.

For each valley ξ\xi, the exact 2N×2N2N\times2N slab Hamiltonian satisfies

HN(ξ)(q)∣unξ(q)⟩=Enξ(q)∣unξ(q)⟩,q=(qx,qy),(57)H_N^{(\xi)}(q)|u_{n\xi}(q)\rangle=E_{n\xi}(q)|u_{n\xi}(q)\rangle,\qquad q=(q_x,q_y), \tag*{(57)}

where n=1,…,2Nn=1,\ldots,2N. The eigenstates are normalized according to ⟨unξ(q)∣umξ(q)⟩=δnm\langle u_{n\xi}(q)|u_{m\xi}(q)\rangle=\delta_{nm}. The position operator along the stacking direction is

Z^=∑ℓ=1Nzℓ(∣ℓA⟩⟨ℓA∣+∣ℓB⟩⟨ℓB∣).(58)\hat{Z}=\sum_{\ell=1}^{N}z_\ell\left(|\ell A\rangle\langle\ell A|+|\ell B\rangle\langle\ell B|\right). \tag*{(58)}

The velocity operators parallel and perpendicular to the layers are, respectively,

v^x(q)=1ℏ∂HN(q)∂qx,(59)\hat{v}_x(q)=\frac{1}{\hbar}\frac{\partial H_N(q)}{\partial q_x}, \tag*{(59)}
v^z(q)=iℏ[HN(q),Z^].(60)\hat{v}_z(q)=\frac{i}{\hbar}\left[H_N(q),\hat{Z}\right]. \tag*{(60)}

We define the corresponding matrix elements

vnm,ξi(q)=⟨unξ(q)∣v^i(q)∣umξ(q)⟩,(61)v^i_{nm,\xi}(q)=\langle u_{n\xi}(q)|\hat{v}_i(q)|u_{m\xi}(q)\rangle, \tag*{(61)}
Znm,ξ(q)=⟨unξ(q)∣Z^∣umξ(q)⟩.(62)Z_{nm,\xi}(q)=\langle u_{n\xi}(q)|\hat{Z}|u_{m\xi}(q)\rangle. \tag*{(62)}

Using Eq. (57), the matrix elements of the perpendicular velocity satisfy

vnm,ξz(q)=iℏ⟨unξ∣[HN,Z^]∣umξ⟩=iℏ[Enξ(q)−Emξ(q)]Znm,ξ(q).(63)v^z_{nm,\xi}(q)=\frac{i}{\hbar}\langle u_{n\xi}|[H_N,\hat{Z}]|u_{m\xi}\rangle=\frac{i}{\hbar}\left[E_{n\xi}(q)-E_{m\xi}(q)\right]Z_{nm,\xi}(q). \tag*{(63)}

Kubo formula

The sheet conductivity of the slab is

Σij(ω)=−ie2ℏ∑ξ,s∫d2q(2π)2∑n≠mfnξ(q)−fmξ(q)Enξ(q)−Emξ(q)×vnm,ξi(q)vmn,ξj(q)Enξ(q)−Emξ(q)+ℏω+iΓ.(64)\Sigma_{ij}(\omega)=-ie^2\hbar\sum_{\xi,s}\int\frac{d^2q}{(2\pi)^2}\sum_{n\ne m}\frac{f_{n\xi}(\boldsymbol{q})-f_{m\xi}(\boldsymbol{q})}{E_{n\xi}(\boldsymbol{q})-E_{m\xi}(\boldsymbol{q})}\times\frac{v^i_{nm,\xi}(\boldsymbol{q})v^j_{mn,\xi}(\boldsymbol{q})}{E_{n\xi}(\boldsymbol{q})-E_{m\xi}(\boldsymbol{q})+\hbar\omega+i\Gamma}. \tag*{(64)}

Here Γ>0\Gamma>0 is a phenomenological broadening. We take the magnetic field along the yy direction, and an electric field E=Ezz^\mathbf{E}=E_z\hat{\mathbf{z}} applied perpendicular to the stack. The off diagonal sheet conductivity is then

Σxz(ω,B)=−ie2ℏ∑ξ,s∫d2q(2π)2∑n≠mfnξ−fmξEnξ−Emξvnm,ξxvmn,ξzEnξ−Emξ+ℏω+iΓ.(65)\Sigma_{xz}(\omega,B)=-ie^2\hbar\sum_{\xi,s}\int\frac{d^2q}{(2\pi)^2}\sum_{n\ne m}\frac{f_{n\xi}-f_{m\xi}}{E_{n\xi}-E_{m\xi}}\frac{v^x_{nm,\xi}v^z_{mn,\xi}}{E_{n\xi}-E_{m\xi}+\hbar\omega+i\Gamma}. \tag*{(65)}

Using Eq. (63), the energy difference in the first denominator cancels, yielding

Σxz(ω,B)=e2∑ξ,s∫d2q(2π)2∑n≠m(fnξ−fmξ)Znm,ξvmn,ξx−(Enξ−Emξ)+ℏω+iΓ.(66)\Sigma_{xz}(\omega,B)=e^2\sum_{\xi,s}\int\frac{d^2q}{(2\pi)^2}\sum_{n\ne m}(f_{n\xi}-f_{m\xi})\frac{Z_{nm,\xi}v^x_{mn,\xi}}{-(E_{n\xi}-E_{m\xi})+\hbar\omega+i\Gamma}. \tag*{(66)}

We now take the limit of DC Hall conductivity. Setting ω=0\omega=0 as well as Γ=0\Gamma=0, and using

vnm,ξx=(vmn,ξx)∗Zmn,ξ=(Znm,ξ)∗(67)v^x_{nm,\xi}=(v^x_{mn,\xi})^\ast\qquad Z_{mn,\xi}=(Z_{nm,\xi})^\ast \tag*{(67)}

we obtain

ΣxzDC=−2e2∑ξ,s∫d2q(2π)2∑nfnξ∑m≠nRe⁡[vnm,ξxZmn,ξ]Enξ−Emξ.(68)\Sigma^{\mathrm{DC}}_{xz}=-2e^2\sum_{\xi,s}\int\frac{d^2q}{(2\pi)^2}\sum_n f_{n\xi}\sum_{m\ne n}\frac{\operatorname{Re}\left[v^x_{nm,\xi}Z_{mn,\xi}\right]}{E_{n\xi}-E_{m\xi}}. \tag*{(68)}

The remaining energy denominator can be eliminated using the momentum dependence of the exact eigenstates. Differentiating HN(q)∣umξ(q)⟩=Emξ(q)∣umξ(q)⟩H_N(\boldsymbol{q})|u_{m\xi}(\boldsymbol{q})\rangle=E_{m\xi}(\boldsymbol{q})|u_{m\xi}(\boldsymbol{q})\rangle with respect to qxq_x and projecting onto ⟨unξ∣\langle u_{n\xi}|, with m≠nm\ne n, gives

⟨unξ|∂HN∂qx|umξ⟩=(Emξ−Enξ)⟨unξ∣∂qxumξ⟩.(69)\left\langle u_{n\xi}\middle|\frac{\partial H_N}{\partial q_x}\middle|u_{m\xi}\right\rangle=(E_{m\xi}-E_{n\xi})\langle u_{n\xi}|\partial_{q_x}u_{m\xi}\rangle. \tag*{(69)}

Since

vnm,ξx=1ℏ⟨unξ|∂HN∂qx|umξ⟩,(70)v^x_{nm,\xi}=\frac{1}{\hbar}\left\langle u_{n\xi}\middle|\frac{\partial H_N}{\partial q_x}\middle|u_{m\xi}\right\rangle, \tag*{(70)}

we have

vnm,ξxEnξ−Emξ=−1ℏ⟨unξ∣∂qxumξ⟩.(71)\frac{v^x_{nm,\xi}}{E_{n\xi}-E_{m\xi}}=-\frac{1}{\hbar}\langle u_{n\xi}|\partial_{q_x}u_{m\xi}\rangle. \tag*{(71)}

Therefore

ΣxzDC=2e2ℏ∑ξ,s∫d2q(2π)2∑nfnξ∑m≠nRe⁡[⟨unξ∣∂qxumξ⟩Zmn,ξ].(72)\Sigma^{\mathrm{DC}}_{xz}=\frac{2e^2}{\hbar}\sum_{\xi,s}\int\frac{d^2q}{(2\pi)^2}\sum_n f_{n\xi}\sum_{m\ne n}\operatorname{Re}\left[\langle u_{n\xi}|\partial_{q_x}u_{m\xi}\rangle Z_{mn,\xi}\right]. \tag*{(72)}

Adding the m=nm=n term to the sum does not change its real part, since ⟨unξ∣∂qxunξ⟩\langle u_{n\xi}|\partial_{q_x}u_{n\xi}\rangle is purely imaginary while Znn,ξZ_{nn,\xi} is real. Using ⟨unξ∣∂qxumξ⟩=−⟨∂qxunξ∣umξ⟩\langle u_{n\xi}|\partial_{q_x}u_{m\xi}\rangle=-\langle\partial_{q_x}u_{n\xi}|u_{m\xi}\rangle, we find

∑mRe⁡[⟨unξ∣∂qxumξ⟩Zmn,ξ]=−Re⁡⟨∂qxunξ∣Z^∣unξ⟩.(73)\sum_m\operatorname{Re}\left[\langle u_{n\xi}|\partial_{q_x}u_{m\xi}\rangle Z_{mn,\xi}\right]=-\operatorname{Re}\langle\partial_{q_x}u_{n\xi}|\hat{Z}|u_{n\xi}\rangle. \tag*{(73)}

Defining

znξ(q)≡Znn,ξ(q)=⟨unξ(q)∣Z^∣unξ(q)⟩,(74)z_{n\xi}(\boldsymbol{q})\equiv Z_{nn,\xi}(\boldsymbol{q})=\langle u_{n\xi}(\boldsymbol{q})|\hat{Z}|u_{n\xi}(\boldsymbol{q})\rangle, \tag*{(74)}

and noting that Z^\hat{Z} is independent of qxq_x, we have ∂znξ∂qx=2Re⁡⟨∂qxunξ∣Z^∣unξ⟩\frac{\partial z_{n\xi}}{\partial q_x}=2\operatorname{Re}\langle\partial_{q_x}u_{n\xi}|\hat{Z}|u_{n\xi}\rangle. Therefore

ΣxzDC=−e2ℏ∑ξ,s∫d2q(2π)2∑nfnξ(q)∂znξ(q)∂qx.(75)\Sigma_{xz}^{\mathrm{DC}}=-\frac{e^2}{\hbar}\sum_{\xi,s}\int\frac{d^2q}{(2\pi)^2}\sum_n f_{n\xi}(\boldsymbol{q})\frac{\partial z_{n\xi}(\boldsymbol{q})}{\partial q_x}. \tag*{(75)}

The three-dimensional conductivity is obtained by dividing the current by the full slab volume, σij(ω)=Σij(ω)Lz\sigma_{ij}(\omega)=\frac{\Sigma_{ij}(\omega)}{L_z}, where LzL_z is the slab thickness. This gives Eq. (7). At zero temperature fnξ=Θ(μ−Enξ)f_{n\xi}=\Theta(\mu-E_{n\xi}). Define the q\boldsymbol{q}-dependent stacking position

Zocc,ξ(q)=∑nfnξ(q)znξ(q),(76)Z_{\mathrm{occ},\xi}(\boldsymbol{q})=\sum_n f_{n\xi}(\boldsymbol{q})z_{n\xi}(\boldsymbol{q}), \tag*{(76)}

so that −eZocc,ξ-eZ_{\mathrm{occ},\xi} is the dipole moment of the electrons at momentum q\boldsymbol{q}. Differentiating,

∂Zocc,ξ∂qx=∑nfnξ∂znξ∂qx−∑nδ(μ−Enξ)∂Enξ∂qxznξ.(77)\frac{\partial Z_{\mathrm{occ},\xi}}{\partial q_x}=\sum_n f_{n\xi}\frac{\partial z_{n\xi}}{\partial q_x}-\sum_n\delta(\mu-E_{n\xi})\frac{\partial E_{n\xi}}{\partial q_x}z_{n\xi}. \tag*{(77)}

At fixed qyq_y, let qxLq_x^{L} and qxRq_x^{R} lie beyond all Fermi crossings. Integrating, and using δ(μ−Enξ)=∑aδ(qx−qx,a)/∣∂qxEnξ∣\delta(\mu-E_{n\xi})=\sum_a\delta(q_x-q_{x,a})/|\partial_{q_x}E_{n\xi}| for the simple crossings qx,aq_{x,a} of band nn,

∫qxLqxRdqx∑nfnξ∂znξ∂qx=Zocc,ξ∣qxLqxR+∑asgn⁡(vx,a)za,(78)\int_{q_x^L}^{q_x^R}dq_x\sum_n f_{n\xi}\frac{\partial z_{n\xi}}{\partial q_x}=Z_{\mathrm{occ},\xi}\bigg|_{q_x^L}^{q_x^R}+\sum_a\operatorname{sgn}(v_{x,a})z_a, \tag*{(78)}

where aa runs over all Fermi crossings at fixed qyq_y (all bands), vx,a=ℏ−1∂qxEnξv_{x,a}=\hbar^{-1}\partial_{q_x}E_{n\xi} and za=znξ(qx,a,qy)z_a=z_{n\xi}(q_{x,a},q_y) are the velocity and position of the crossing state.

We now show that the first term in Eq. (78) vanishes. At qxL,Rq_x^{L,R} the chemical potential lies in a gap, so the occupied states are the NN lowest bands and Zocc,ξ=∑ℓzℓnℓZ_{\mathrm{occ},\xi}=\sum_\ell z_\ell n_\ell, with nℓn_\ell the occupied charge on layer ℓ\ell. In the minimal model the Hamiltonian is chiral, ΓHNΓ=−HN\Gamma H_N\Gamma=-H_N with Γ=±1\Gamma=\pm1 on the AA (BB) sites, so Γ∣unξ⟩\Gamma|u_{n\xi}\rangle is an eigenstate at −Enξ-E_{n\xi} with the same weight on every site. Γ\Gamma thus maps the occupied (negative-energy) states onto the empty (positive-energy) ones without changing the site weights, so each site has equal occupied and empty weight, which add up to one by completeness. Each site is therefore half filled, nℓ=1n_\ell=1 for all ℓ\ell, and Zocc,ξ=∑ℓzℓ=0Z_{\mathrm{occ},\xi}=\sum_\ell z_\ell=0 at both ends.

Physically, the filled valence band is neutral layer by layer and carries no dipole; a dipole appears only when states near μ\mu are added or removed, which happens at the Fermi crossings. The remote hopping γ4\gamma_4 (γ4/γ0≈0.04\gamma_4/\gamma_0\approx0.04) breaks the chiral symmetry, but only weakly, and we verified numerically that ∣Zocc,ξ(qxL,R)∣|Z_{\mathrm{occ},\xi}(q_x^{L,R})| is negligible for all fields and qyq_y considered. Therefore, with

SN(qy)≡−1Lz∑asgn⁡(vx,a)za,(79)S_N(q_y)\equiv-\frac{1}{L_z}\sum_a\operatorname{sgn}(v_{x,a})z_a, \tag*{(79)}

we obtain Eq. (7).

The same steps apply to a two-dimensional electron gas confined to 0<y<W0<y<W in a perpendicular field, with Z^→y^\hat{Z}\to\hat{y}, Lz→WL_z\to W and a single conserved momentum kxk_x. For μ\mu in a Landau gap the boundary term in Eq. (78) vanishes trivially, since beyond the outermost crossing all levels lie above μ\mu, and one obtains σxy=(e2/h)[yn(kR)−yn(kL)]/W\sigma_{xy}=(e^2/h)[y_n(k_R)-y_n(k_L)]/W, with kL,Rk_{L,R} the two Fermi crossings of level nn. For a hard wall the crossing states lie ∼ℓB\sim\ell_B inside the edges, so σxy=νe2/h[1−O(ℓB/W)]\sigma_{xy}=\nu e^2/h[1-O(\ell_B/W)], whereas an edge probe exchanges electrons with a single chirality, reads μS\mu_S or μD\mu_D, and gives RH=h/νe2R_H=h/\nu e^2 exactly.

For ∣qy∣<q0|q_y|<q_0 the bulk problem at fixed qyq_y is the pair of anisotropic Dirac cones τ=±\tau=\pm of Eq. (26) in the common field ByB_y. The two cones have opposite chirality, like the KK and K′K' valleys of graphene, and, as there, their Hall conductivities add rather than cancel. With the n=0n=0 level filled each contributes e2/2he^2/2h with a sign set by the field [21], so the slice carries C(qy)=1C(q_y)=1 per spin and valley for μ\mu between the zeroth and first levels. For ∣qy∣>q0|q_y|>q_0 the plane misses the spiral, Eq. (22), and C=0C=0; the change is permitted by the closing of the Landau gap at q0q_0, Figure S3. Bulk–boundary correspondence [22] applies once the slab has a bulk, i.e. once Landau levels have formed inside it, ΔB≫ΔN\Delta_B\gg\Delta_N (Lz≫δzL_z\gg\delta_z), so that the modes on the two surfaces are decoupled. It then gives NR−NL=±C(qy)N_R-N_L=\pm C(q_y) on the two surfaces, which fixes NR(qy)=1N_R(q_y)=1 in Eq. (3) and ηt,b=∓1\eta_{t,b}=\mp1 in Eq. (5). For ΔB≲ΔN\Delta_B\lesssim\Delta_N the two surfaces hybridize, the spectrum consists of confinement subbands, and NRN_R is not fixed by C(qy)C(q_y); this is the low-field regime of Figure 1 and Figure 4.

Zero-energy states

Here we count the zero-energy states of the minimal model whose locus is the tilted cylinder of Figure 2(d), and define the layer-resolved spectral function of Figure 2(c). All counts are per spin and valley.

Cylinder wall. At fixed qyq_y with ∣qy∣<q0\lvert q_y\rvert< q_0, each of the two zeroth-Landau-level branches τ=±\tau= \pm exists over the range of qxq_x in which its guiding center lies inside the slab. Since d⟨z⟩/dqx=−ℓB2\mathrm{d}\langle z\rangle/\mathrm{d}q_x = -\ell_B^2 (Sec. S.II), this range is Δqx=Lz/ℓB2=α(N−1)q0\Delta q_x = L_z/\ell_B^2 = \alpha(N-1)q_0, the same for all ∣qy∣<q0\lvert q_y\rvert< q_0. The number of wall states per unit area of the slab is therefore

∫−q0q0dqy2π 2αNq02π=αNq02π2,(80)\int_{-q_0}^{q_0} \frac{\mathrm{d}q_y}{2\pi}\, 2\frac{\alpha N q_0}{2\pi} = \frac{\alpha N q_0^2}{\pi^2}, \tag*{(80)}

and per unit volume, dividing by Lz=(N−1)dL_z = (N-1)d and using α=d/ℓB2q0\alpha= d/\ell_B^2 q_0,

ρ3D=q0π2ℓB2=2×12πℓB2×2q02π.(81)\rho_{3D} = \frac{q_0}{\pi^2\ell_B^2} = 2 \times\frac{1}{2\pi\ell_B^2} \times\frac{2q_0}{2\pi}. \tag*{(81)}

the Landau degeneracy of each xzxz plane, times the density q0/πq_0/\pi of qyq_y channels along the field, times two for τ=±\tau= \pm. It is proportional to BB and independent of NN.

Bases. Each drumhead disk has radius q0q_0 in momentum space, Sec. S.III, and contributes πq02/(2π)2=q02/4π\pi q_0^2/(2\pi)^2 = q_0^2/4\pi states per unit area; the two bases together q02/2πq_0^2/2\pi, independent of BB.

The number of surface to bulk zero-energy states is

q02/2παNq02/π2=π2αN.(82)\frac{q_0^2/2\pi}{\alpha N q_0^2/\pi^2} = \frac{\pi}{2\alpha N}. \tag*{(82)}

equal to 1.46 for N=51N = 51 at 25 T. In this geometric estimate, the number of bulk zeroth-Landau-level states exceeds the number of drumhead surface states when αN>π/2\alpha N > \pi/2.

Spectral function. Figure 2(c) shows

A(E,q,zℓ)=−1πIm⁡∑n=12N∑α=A,B∣uℓαn(q)∣2E−En(q)+iΓ.(83)A(E,q,z_\ell) = -\frac{1}{\pi}\operatorname{Im}\sum_{n=1}^{2N}\frac{\sum_{\alpha=A,B}\lvert u_{\ell\alpha}^{n}(q)\rvert^2}{E-E_n(q)+\mathrm{i}\Gamma}. \tag*{(83)}

with uℓαnu_{\ell\alpha}^{n} the amplitude of eigenstate nn on site α\alpha of layer ℓ\ell. In a finite slab a Landau branch arriving at a surface meets the drumhead state of that surface near the edge of its disk; the two hybridize and split. The weight at E=0E = 0 therefore vanishes over a range ∼δz/ℓB2\sim\delta z/\ell_B^2 of qxq_x at each end of the branch. The wall of the cylinder is the locus of the zero-energy states, not a surface they cover.

References

  1. [1]G. Chen, A. L. Sharpe, P. Gallagher, I. T. Rosen, E. J. Fox, L. Jiang, B. Lyu, H. Li, K. Watanabe, T. Taniguchi, et al., Signatures of tunable superconductivity in a trilayer graphene moiré superlattice, Nature 572, 215 (2019).DOI
  2. [2]Y. Shi, S. Xu, Y. Yang, S. Slizovskiy, S. V. Morozov, S.-K. Son, S. Ozdemir, C. Mullan, J. Barrier, J. Yin, A. I. Berdyugin, B. A. Piot, T. Taniguchi, K. Watanabe, V. I. Fal’ko, K. S. Novoselov, A. K. Geim, and A. Mishchenko, Electronic phase separation in multilayer rhombohedral graphite, Nature 584, 210–214 (2020).
  3. [3]H. Zhou, T. Xie, T. Taniguchi, K. Watanabe, and A. F. Young, Superconductivity in rhombohedral trilayer graphene, Nature 598, 434–438 (2021).
  4. [4]H. Zhou, T. Xie, A. Ghazaryan, T. Holder, J. R. Ehrets, E. M. Spanton, T. Taniguchi, K. Watanabe, E. Berg, M. Serbyn, and A. F. Young, Half- and quarter-metals in rhombohedral trilayer graphene, Nature 598, 429–433 (2021).DOI
  5. [5]T. Han, Z. Lu, G. Scuri, J. Sung, J. Wang, T. Han, K. Watanabe, T. Taniguchi, H. Park, and L. Ju, Correlated insulator and chern insulators in pentalayer rhombohedral-stacked graphene, Nature Nanotechnology 19, 181–187 (2023).DOI
  6. [6]T. Han, Z. Lu, Y. Yao, J. Yang, J. Seo, C. Yoon, K. Watanabe, T. Taniguchi, L. Fu, F. Zhang, and L. Ju, Large quantum anomalous hall effect in spin-orbit proximitized rhombohedral graphene, Science 384, 647–651 (2024).DOI
  7. [7]T. Han, Z. Lu, Z. Hadji, L. Shi, Z. Wu, W. Xu, Y. Yao, A. A. Cotton, O. Sharifi Sedesh, H. Weldeyesus, J. Yang, J. Seo, S. Ye, M. Zhou, H. Liu, G. Shi, Z. Hua, K. Watanabe, T. Taniguchi, P. Xiong, D. M. Zumbühl, L. Fu, and L. Ju, Signatures of chiral superconductivity in rhombohedral graphene, Nature 643, 654–661 (2025).DOI
  8. [8]J. Yang, X. Shi, S. Ye, C. Yoon, Z. Lu, V. Kakani, T. Han, J. Seo, L. Shi, K. Watanabe, et al., Impact of spin–orbit coupling on superconductivity in rhombohedral graphene, Nature Materials 24, 1058 (2025).DOI
  9. [9]H. Min and A. H. MacDonald, Electronic structure of multilayer graphene, Progress of Theoretical Physics Supplement 176, 227–252 (2008).DOI
  10. [10]M. Koshino and E. McCann, Trigonal warping and berry’s phase in abc-stacked multilayer graphene, Physical Review B 80, 10.1103/physrevb.80.165409 (2009).DOI
  11. [11]T. T. Heikkilä and G. E. Volovik, Dimensional crossover in topological matter: Evolution of the multiple dirac point in the layered system to the flat band on the surface, JETP Letters 93, 59–65 (2011).DOI
  12. [12]D. Pierucci, H. Sediri, M. Hajlaoui, J.-C. Girard, T. Brumme, M. Calandra, E. Velez-Fort, G. Patriarche, M. G. Silly, G. Ferro, et al., Evidence for flat bands near the fermi level in epitaxial rhombohedral multilayer graphene, ACS nano 9, 5432 (2015).DOI
  13. [13]H. Henck, J. Avila, Z. Ben Aziza, D. Pierucci, J. Baima, B. Pamuk, J. Chaste, D. Utt, M. Bartos, K. Nogajewski, B. A. Piot, M. Orlita, M. Potemski, M. Calandra, M. C. Asensio, F. Mauri, C. Faugeras, and A. Ouerghi, Flat electronic bands in long sequences of rhombohedral-stacked graphene, Physical Review B 97, 10.1103/physrevb.97.245421 (2018).DOI
  14. [14]H. Zhang, Q. Li, M. G. Scheer, R. Wang, C. Tuo, N. Zou, W. Chen, J. Li, X. Cai, C. Bao, M.-R. Li, K. Deng, K. Watanabe, T. Taniguchi, M. Ye, P. Tang, Y. Xu, P. Yu, J. Avila, P. Dudin, J. D. Denlinger, H. Yao, B. Lian, W. Duan, and S. Zhou, Correlated topological flat bands in rhombohedral graphite, Proceedings of the National Academy of Sciences 121, 10.1073/pnas.2407104121 (2024).DOI
  15. [15]M. Tymczyszyn, P. H. Cross, and E. McCann, Solitons induced by an in-plane magnetic field in rhombohedral multilayer graphene, Physical Review B 108, 10.1103/physrevb.108.115425 (2023).
  16. [16]J.-W. Rhim and Y. B. Kim, Landau level quantization and almost flat modes in three-dimensional semimetals with nodal ring spectra, Physical Review B 92, 10.1103/physrevb.92.045126 (2015).DOI
  17. [17]R. A. Molina and J. González, Surface and 3d quantum hall effects from engineering of exceptional points in nodal-line semimetals, Physical Review Letters 120, 10.1103/physrevlett.120.146601 (2018).
  18. [18]See Supplemental Materials.
  19. [19]I. Bartoš and B. Rosenstein, Edges of two-dimensional electron systems under strong magnetic fields, Progress In Surface Science 50, 91 (1995).DOI
  20. [20]P. Středa, T. Jonckheere, and J. Kučera, Hall current and electron polarizability of a two-dimensional electron gas subjected to weak superlattice potentials, Phys. Rev. B 76, 085310 (2007).DOI
  21. [21]Y. Zheng and T. Ando, Hall conductivity of a two-dimensional graphite system, Phys. Rev. B 65, 245420 (2002).DOI
  22. [22]Y. Hatsugai, Chern number and edge states in the integer quantum Hall effect, Phys. Rev. Lett. 71, 3697 (1993).pubmed.ncbi.nlm.nih.gov/10055049

Paper details

vlnc:W_xs4hw734
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents