betaFeedback

WorksPhysics and Astronomy

Vacancy-Ordered Double Perovskites Cs2_2BI6_6 (B = Pt, Pd, Te, Sn): An Emerging Class of Thermoelectric Materials

Abstract

Vacancy-ordered double perovskites (A2_2BX6_6), being one of the environmentally friendly and stable alternatives to lead halide perovskites, have garnered considerable research attention in the scientific community. However, their thermal transport has not been explored much despite their potential applications. Here, we explore Cs2_2BI6_6 (B = Pt, Pd, Te, Sn) as potential thermoelectric materials using the state-of-the-art first-principles based methodologies, viz., density functional theory combined with many-body perturbation theory (G0_0W0_0) and spin-orbit coupling. %The phonon dispersion plots and Poisson's and Pugh's ratios show the dynamical and mechanical stability of this class of perovskites. The absence of polyhedral connectivity in vacancy-ordered perovskites gives rise to additional degrees of freedom leading to lattice anharmonicity. The presence of anharmonic lattice dynamics leads to strong electron-phonon coupling, which is well captured by Fröhlich mesoscopic model. % to investigate the interaction of longitudinal optical phonon modes with the carriers that strongly influence the carrier mobility. The lattice anharmonicity is further studied using ab initio molecular dynamics and electron localization function. The maximum anharmonicity is observed in Cs2_2PtI6_6, followed by Cs2_2PdI6_6, Cs2_2TeI6_6 and Cs2_2SnI6_6. Also, the computed average thermoelectric figure of merit (zTzT) for Cs2_2PtI6_6, Cs2_2PdI6_6, Cs2_2TeI6_6 and Cs2_2SnI6_6 are 0.88, 0.85, 0.95 and 0.78, respectively, which reveals their promising renewable energy applications.

Graphical TOC Entry

Image not extracted

Figure 1.

Sustainable and renewable energy sources have become a long-standing aim in fulfilling the shortage of energy globally[1, 2, 3, 4]. Apart from solar energy, waste heat energy converted into electrical energy is a prominent source of renewable energy. To utilize this waste heat effectively, we need efficient thermoelectric materials[5, 6, 7]. Advantageously, the thermoelectric generators are durable, robust, scalable, compact and do not contain any moving parts. Note that, to have the maximum thermoelectric figure of merit (zTzT, see below), the material must have a large Seebeck coefficient (SS) along with high electrical conductivity (σ\sigma) and a low thermal conductivity (κ\kappa)[8, 9] [10].

zT=S2σTκ(1)zT = \frac{S^{2}\sigma T}{\kappa} \tag*{(1)}

However, the strong coupling between these parameters with a trade-off relationship is challenging to achieve a high zTzT in a single system.

Halide-based perovskites have unveiled a paradigm shift in the quest for high-performance materials[2] [11, 12, 13, 14]. This can be attributed to their compositional and structural diversity that enables a wide array of functional properties15. More recently, halide perovskites have attracted attention for thermoelectric energy conversion due to their unique structural features and lattice dynamics16–20. Yang et al. 17 reported an ultralow thermal conductivity of 0.5 W m−1 K−1\mathrm{W\,m^{-1}\,K^{-1}} in halide perovskite nanowires composed of CsPbI3\mathrm{CsPbI_3}, CsPbBr3\mathrm{CsPbBr_3} and CsSnI3\mathrm{CsSnI_3}. Additionally, several strategies viz., introduction of lattice defects in the structure30,31, creation of artificial superlattices and preparation of composite materials32, have been explored to reduce the lattice thermal conductivities in materials. Most of the reported thermoelectric materials, such as SnSe\mathrm{SnSe}21,22, PbTe\mathrm{PbTe}23–26, Cu2Se\mathrm{Cu_2Se}27 and BiCuSeO\mathrm{BiCuSeO}28,29, have low intrinsic lattice thermal conductivity, similar in magnitude to that observed in halide perovskites. This exceptionally low thermal conductivity of halide perovskites, in conjunction with their high carrier mobility, makes them promising for thermoelectric investigations18,33,34. However, unfortunately, these alluring materials suffer from lead toxicity and long-term instability. These drawbacks have motivated the scientific community to explore alternative perovskite compositions and structures.

One alternative class of materials is the inorganic lead-free double perovskites with the general formula A2BX6\mathrm{A}_{2}\mathrm{B}\mathrm{X}_{6}, commonly known as vacancy-ordered double perovskites. This defect-variant of halide perovskite is derived by doubling the ABX3\mathrm{ABX}_{3} unit cell along all three crystallographic axes and removing every alternate BB-site cation, as illustrated in Figure 1. These perovskites provide new opportunities for non-toxic and stable replacements of Pb and Sn. Lately, vacancy-ordered double perovskites have been explored in thermoelectrics due to their ultralow lattice thermal conductivity, which is attributed to their highly anharmonic lattice dynamics16,18,35. More recently, Jong et al. have reported that twofold rattling modes of Cs atoms and SnI6\mathrm{SnI}_{6} clusters lead to ultralow thermal conductivity in Cs2SnI6\mathrm{Cs}_{2}\mathrm{SnI}_{6}36.

Image not extracted

Figure 1 (PDF p. 4). Schematic of the relationship between ABX3\mathrm{ABX}_{3} perovskite and A2BX6\mathrm{A}_{2}\mathrm{BX}_{6} (vacancy-ordered) double perovskite.

Motivated by this idea, in this Letter, we have studied the vacancy-ordered double perovskites Cs2BI6\mathrm{Cs}_{2}\mathrm{BI}_{6} (B=PtB = \mathrm{Pt}, Pd\mathrm{Pd}, Te\mathrm{Te}, Sn\mathrm{Sn}) using state-of-the-art first-principles based methodologies under the framework of density functional theory (DFT)37,38 with suitable exchange-correlation (εxc\varepsilon_{\mathrm{xc}}) functionals combined with many-body perturbative approaches (G0W0G_{0}W_{0})39,40 and spin-orbit coupling (SOC). First, we have examined the structural, mechanical and thermodynamic stability of these materials. After that, we have studied the thermoelectric properties, where we find reasonably high zTzT values, calculated as a function of temperature (TT). Interestingly, we have observed the presence of anharmonic effects, which are quantified by computing the harmonic and anharmonic energy contribution as a function of temperature in these vacancy-ordered double perovskites. In order to further explore the underlying mechanisms, we have examined the dynamical stability and anharmonicity by computing the phonon bandstructures and electron localization function (ELF).

The ELF further confirms the presence of anharmonicity in this class of systems. As a consequence, we find that the study of electron-phonon interaction is important. The electron-phonon interaction is well captured by studying Fröhlich mesoscopic model41,42 to investigate the interaction of longitudinal optical phonon modes with the carriers that strongly influence the carrier mobility.

Cs2BI6\mathrm{Cs}_{2}\mathrm{BI}_{6} (B=Pt,Pd,Te,Sn\mathrm{B} = \mathrm{Pt}, \mathrm{Pd}, \mathrm{Te}, \mathrm{Sn}) vacancy-ordered double perovskites have a face-centered cubic crystal structure with the space group Fm3‾mFm\overline{3}m (no. 225). In this structure, the Cs atoms are situated at the 8c Wyckoff positions and (0.25, 0.25, 0.25) coordinates, B atoms at 4a Wyckoff positions and (0, 0, 0) coordinates, and I atoms at 24e Wyckoff positions and (xx, 0, 0) coordinates, where the value of xx is around 0.20. Each of the Cs atoms resides between the [BI6\mathrm{BI}_{6}] octahedra and is surrounded by 12 I atoms, while the B atoms are at the corners and face-centered positions of [BI6\mathrm{BI}_{6}] octahedra. The Cs atoms located in the octahedral cage can act as heavy rattlers and lead to lattice anharmonicity36. The optimized lattice parameters of Cs2BI6\mathrm{Cs}_{2}\mathrm{BI}_{6} perovskites are listed in Table S1 of Supporting Information (SI).

ConfigurationsExperimentalPBEPBE-vdWoptB86-vdW
Cs2PtI6\mathrm{Cs}_{2}\mathrm{PtI}_{6}11.37111.37^{1}11.7411.4711.29
Cs2PdI6\mathrm{Cs}_{2}\mathrm{PdI}_{6}11.33211.33^{2}11.6711.4211.23
Cs2TeI6\mathrm{Cs}_{2}\mathrm{TeI}_{6}11.70311.70^{3}12.0611.8711.65
Cs2SnI6\mathrm{Cs}_{2}\mathrm{SnI}_{6}11.65311.65^{3}12.0011.8211.57

Table S1. Calculated lattice parameters (Å) of Cs2BI6\mathrm{Cs}_{2}\mathrm{BI}_{6} (B = Pt, Pd, Te, Sn) vacancy-ordered double perovskites using different exchange-correlation (εxc\varepsilon_{xc}) functionals.

Firstly, we have examined the stability of material as it is an essential factor in achieving a high-performance device applications. In order to predict the structural stability of the vacancy-ordered double perovskites, we have calculated the Goldschmidt tolerance factor (tt)43,44 and octahedral factor (μ\mu)45. Recently, a new tolerance factor (τ\tau)46, proposed by Bartel et al. is also computed and compared for all the considered perovskites (see details in § 8 of SI). The calculated values show that these perovskites are stable in cubic structures. Besides structural stability, we have also calculated the thermodynamic and mechanical stabilities. For thermodynamic stability47,48, we have calculated the Gibbs free energies (ΔG\Delta G) of perovskites as per the equations given in § 9 of SI. ΔG\Delta G is calculated using both Perdew-Burke-Ernzerhof (PBE)49 and Heyd–Scuseria–Ernzerhof (HSE06)50,51 εxc\varepsilon_{xc} functionals in the Cs2BI6\mathrm{Cs}_{2}\mathrm{BI}_{6} perovskites. The values of ΔG\Delta G are negative, indicating the thermodynamic stability of these perovskites (for details, refer Table S3 of SI).

ConfigurationsΔG\Delta G (eV/atom) (PBE)ΔG\Delta G (eV/atom) (HSE06)
Cs2_2PtI6_6-0.62-0.77
Cs2_2PdI6_6-0.04-0.16
Cs2_2TeI6_6-1.09-1.17
Cs2_2SnI6_6-0.35-0.44

Table S3. ΔG(T,P)\Delta G(T,P) of Cs2_2BI6_6 perovskites calculated using PBE and HSE06 εxc\varepsilon_{xc} functionals

Subsequently, to determine the mechanical stability of the perovskites, we have calculated the elastic constants of the materials using the finite strain theory52. For cubic symmetry, three independent elastic constants viz., C11C_{11}, C12C_{12} and C44C_{44} are sufficient to explain the mechanical stability and related properties of the crystal. Using these elastic constants, we can calculate Bulk (BB), Shear (GG) and Young’s modulus (EE) of the perovskites (for details, see Section IV of SI). The corresponding mechanical stability criterion53,54 is given as follows:

C11>0, C44>0, C11−C12>0, C11+2C12>0(2)C_{11} > 0,\ C_{44} > 0,\ C_{11} - C_{12} > 0,\ C_{11} + 2C_{12} > 0 \tag*{(2)}

The calculated elastic constants and moduli are given in Table 1. As we can see, the elastic constants satisfy the stability criteria, indicating the mechanical stability of these vacancy-ordered double perovskites. The fragility of these perovskites are studied in terms of Pugh’s (B/GB/G) and Poisson’s ratio (ν\nu). The calculated values of B/GB/G (> 1.75) and ν\nu (> 0.26) show that the studied vacancy-ordered double perovskites are ductile (see Table 1 below). Also, we have calculated the elastic anisotropy (AA) of these materials, given by the equation:

ConfigurationsC11C_{11}C12C_{12}C44C_{44}BBGGEEB/GB/Gν\nuAA
Cs2_2PtI6_69.584.513.936.203.308.401.880.271.55
Cs2_2PdI6_616.648.987.3611.535.6611.392.040.291.92
Cs2_2TeI6_620.3010.558.7013.806.9017.742.000.291.78
Cs2_2SnI6_614.368.206.6510.254.8812.632.100.292.16

Table 1. Calculated elastic constants CijC_{ij} (GPa), Bulk modulus BB (GPa), Shear modulus GG (GPa), Young’s modulus EE (GPa), Pugh’s ratio B/GB/G, Poisson’s ratio ν\nu and elastic anisotropy AA of Cs2_2BI6_6 vacancy-ordered double perovskites.

A=2C44C11−C12(3)A = \frac{2C_{44}}{C_{11} - C_{12}} \tag*{(3)}

where AA represents the elastic anisotropy coefficient. The value of AA is equal to 1 for an isotropic crystal. The deviation from this value measures the degree of elastic anisotropy possessed by the crystal. According to the calculated values, all the considered double perovskites are anisotropic in nature.

After studying the stability, we have calculated the electronic band gaps (with and without SOC) of the vacancy-ordered double perovskites. Since simple local/semi-local εxc\varepsilon_{xc} functionals (viz., LDA, GGA) are unable to predict the band gaps correctly due to their incapability of capturing the electron’s self-interaction error, we have employed HSE06 εxc\varepsilon_{xc} functional and many-body perturbation theory (G0W0G_{0}W_{0}) to calculate the band gaps more accurately. The calculated band gaps of Cs2_2PtI6_6, Cs2_2PdI6_6, Cs2_2TeI6_6 and Cs2_2SnI6_6 are 1.35, 1.43, 1.49 and 1.23 eV, respectively. This implies that all these perovskites have band gaps in the visible region, expanding their scope for energy-harvesting applications. The values of band gaps are listed in Table 2, which agree well with the experimental values. The bandstructures, projected density of states (pDOS) and kk-grid convergence data are provided for all perovskites in Section V-§ 13 of SI.

ConfigurationsPBEPBE+SOCHSE06HSE06+SOCG0_0W0_0@PBE+SOCG0_0W0_0@HSE06+SOCExperimental
Cs2_2PtI6_60.360.291.070.961.352.201.3755
Cs2_2PdI6_60.060.020.620.510.591.431.4156
Cs2_2TeI6_61.140.911.701.492.122.441.5057
Cs2_2SnI6_60.090.060.840.701.232.311.2515

Table 2. Band gap (eV) of Cs2_2BI6_6 vacancy-ordered double perovskites calculated using different εxc\varepsilon_{xc} functionals.

Next, we have calculated the thermoelectric properties of the perovskites using the BoltzTrap Code58. Figure 2(a) shows the Seebeck coefficient (SS) as a function of chemical potential (μ\mu) for Cs2_2BI6_6 perovskites (for computational details, see § 14 of SI). SS measures the induced thermoelectric voltage (ΔV\Delta V) in response to a temperature difference (ΔT\Delta T) across the material and is given as S=ΔV/ΔTS=\Delta V/\Delta T, while μ\mu shows the addition or removal of electrons (doping) against the repulsive forces of electrons already present in the material. Advantageously, the position of μ\mu determines the fraction of electrons in the conduction or valence band which take part in the electronic transport and hence influences SS. Thus, SS can be determined from the change in the chemical potential of electrons induced by the temperature difference. By definition, μ=0\mu=0 coincides with the top of the valence band in semiconductors. This implies that at μ=0\mu=0, the nature of SS determines the type of semiconductor. From Figure 2(a), we can see that at μ=0\mu=0, the value of SS is positive for Cs2_2PtI6_6 and Cs2_2TeI6_6 at various temperatures, indicating that these perovskites are pp-type semiconductors. The maximum values of SS for Cs2_2PtI6_6 and Cs2_2TeI6_6 are 710 and 190 μ\muV/K, respectively, at 300 K. On the other hand, SS is negative for Cs2_2PdI6_6 and Cs2_2SnI6_6, which indicates the nn-type character in these perovskites59. For Cs2_2PdI6_6 and Cs2_2SnI6_6, the maximum values of SS are 148 and 290 μ\muV/K, respectively, at 300 K. Also, we have observed that the value of SS decreases with an increase in temperature for all the considered Cs2_2BI6_6 perovskites. Figure 2(b) shows the variation of SS with

Image not extracted

Figure 2. Seebeck coefficient (SS) as a function of (a) chemical potential (μ\mu) and (b) carrier concentration (nn) at 300, 500 and 800 K. (c) Thermoelectric figure of merit (zTzT) as a function of temperature (TT) for Cs2_2PtI6_6, Cs2_2PdI6_6, Cs2_2TeI6_6 and Cs2_2SnI6_6, calculated using HSE06 εxc\varepsilon_{xc} functional.

carrier concentration (nn)60,61 at different temperatures. Subsequently, to calculate the efficiency of material to convert heat into electrical energy, we have calculated the zTzT as a function of temperature (see Figure 2(c)) for Cs2_2BI6_6 perovskites. The computed average zTzT for Cs2_2PtI6_6, Cs2_2PdI6_6, Cs2_2TeI6_6 and Cs2_2SnI6_6 are 0.88, 0.85, 0.95 and 0.78, respectively, which make them promising for thermoelectric applications.

Low thermal conductivity is desirable for efficient thermoelectric materials, which in turn depends on lattice dynamics62,63. Lattice dynamics play a pivotal role in governing materials properties such as thermal conductivity64, ionic and electronic transport65, optical emission66, ferroelectricity and superconductivity67. Deviation from harmonic vibrational potential results in high amplitude anharmonic vibrations that introduce vibrational disorder in the system. This results in significant phonon-phonon scattering, which leads to low thermal conductivities and better thermoelectric performance68–70 (see details in Section IX of SI). To examine this deviation at high temperatures, we have calculated the harmonic (UhU_h) as well as anharmonic energy (UahU_{ah}) in vacancy-ordered double perovskites. UhU_h is calculated under harmonic approximation for all perovskites. To quantify UahU_{ah} in Cs2_2BI6_6 vacancy-ordered double perovskites, we have performed AIMD calculations at different temperatures using Nose-Hoover thermostat71. This data is then fed to a post-processing python package pyHMA72, which determines the anharmonic energy (for details, see § 16 of SI). Figure 3(a-Figure 3d) show the variation of UahU_{ah} with temperature. As the temperature increases, we observe a deviation from harmonic potential leading to lattice anharmonicity.

Image not extracted

Figure 3. Harmonic (UhU_{\mathrm{h}}) and anharmonic energy (UahU_{\mathrm{ah}}) of (a) Cs2PtI6\mathrm{Cs}_{2}\mathrm{PtI}_{6} (b) Cs2PdI6\mathrm{Cs}_{2}\mathrm{PdI}_{6} (c) Cs2TeI6\mathrm{Cs}_{2}\mathrm{TeI}_{6} and (d) Cs2SnI6\mathrm{Cs}_{2}\mathrm{SnI}_{6} as a function of temperature (TT), calculated using HSE06 εxc\varepsilon_{\mathrm{xc}} functional.

The intimate connection between anharmonic lattice dynamics and functional properties motivates a fundamental understanding of anharmonicity in this class of materials. To further assess anharmonicity in our system, we have first examined the dynamical stability by plotting the phonon dispersion bandstructures of all Cs2_2BI6_6 perovskites using density functional perturbation theory (DFPT)73, as shown in Figure 4(a). For vacancy-ordered double perovskites, the structural symmetry confirms 108 phonon modes as they contain 36 atoms per unit cell. Out of these 108 phonon modes, there are 3 acoustic modes, while the remaining modes are optical, characterized as low and high-frequency phonons, respectively. The absence of negative frequencies confirms the dynamical stability of these perovskites. After examining the phonon modes, we try to explore the interaction between the atoms of these perovskites. The spatial distribution of the electron density around atom gives the measure of phonon anharmonicity. Therefore, we have computed the ELF to study materials bonding and anharmonicity (see Figure 4(b)). The localization of electrons is estimated by a dimensionless ELF probability density ranging between 0 and 1. With the increase in ELF value, the electrons get more localized, and hence the bonds become stronger. As we can see in Figure 4(b), I atoms draw more charge because of its higher electronegativity in comparison to B atoms. Nevertheless, there is significant charge sharing among B-I bonds due to the small electronegativity difference, indicating the possibility of covalent bonding. On the other hand, no charge is shared between Cs and B/I atoms. However, physical interaction between Cs and [BI6][\mathrm{BI}_{6}] octahedra results in nonspherical electron density around Cs and I atoms, which explains the origin of the phonon anharmonicity. Also, there is no charge transfer between the neighbouring octahedra owing to the vacancies in Cs2BI6\mathrm{Cs}_{2}\mathrm{BI}_{6} perovskites. This indicates that [BI6][\mathrm{BI}_{6}] octahedra in Cs2BI6\mathrm{Cs}_{2}\mathrm{BI}_{6} are loosely bound and may lead to cluster-rattling vibrations along with Cs atom rattlers36. This in turn, increases the phonon scattering followed by suppression of κ\kappa69,70.

Image not extracted

Figure 4. (a) Phonon dispersion plots and (b) two dimensional ELF of (110) plane passing through Cs, Pt, Pd, Te, Sn and I atoms of Cs2_2PtI6_6, Cs2_2PdI6_6, Cs2_2TeI6_6 and Cs2_2SnI6_6, calculated using PBE εxc\varepsilon_{\mathrm{xc}} functional. The ELF values of 0.0, 0.5, and 1.0 are interpreted as absence, uniform electron gas like, and localized electrons, respectively.

Anharmonic lattice dynamics give rise to stronger electron-phonon coupling in the material as electrons interact with lattice vibrations via the formation of polarons74,75. To study these electron-phonon interactions, we have calculated the electron-phonon coupling strength using Fröhlich’s polaron model42. The dimensionless Fröhlich electron-phonon coupling parameter (α\alpha) measures the electron-phonon coupling strength of the material and is given as:

α=14πε012(1ε∞−1εstatic)e2ℏωLO(2m∗ωLOℏ)1/2(4)\alpha= \frac{1}{4\pi\varepsilon_0}\frac{1}{2}\left(\frac{1}{\varepsilon_{\infty}}-\frac{1}{\varepsilon_{\mathrm{static}}}\right)\frac{e^2}{\hbar\omega_{\mathrm{LO}}}\left(\frac{2m^{*}\omega_{\mathrm{LO}}}{\hbar}\right)^{1/2} \tag*{(4)}

The α\alpha depends on the material-specific properties, viz., electronic (ε∞\varepsilon_{\infty}) and ionic static (εstatic\varepsilon_{\mathrm{static}}) dielectric constants, permittivity of free space (ε0\varepsilon_0), the effective carrier mass (m∗m^{*}) (for calculation of effective mass, see § 17 in SI), and a characteristic longitudinal optical phonon angular frequency (ωLO\omega_{\mathrm{LO}}). For a system having multiple phonon branches, an average LO frequency is calculated by considering all the infrared active optical phonon branches and taking a spectral average of them76 (for details of calculation of ωLO\omega_{\mathrm{LO}} and different polaron parameters, see § 18 of SI). The values of α\alpha for Cs2_2BI6_6 perovskites are listed in Table 4 and follow the order:

ConfigurationsωLO\omega_{\mathrm{LO}} (THz)αe\alpha_{\mathrm{e}}mP/m∗m_{\mathrm{P}}/m^{*}lPl_{\mathrm{P}} (Å)μP\mu_{\mathrm{P}} (cm2V−1s−1\mathrm{cm}^{2}\mathrm{V}^{-1}\mathrm{s}^{-1})
Cs2PtI6\mathrm{Cs}_{2}\mathrm{PtI}_{6}1.742.241.2922.9042.15
Cs2PdI6\mathrm{Cs}_{2}\mathrm{PdI}_{6}1.621.811.1925.1064.90
Cs2TeI6\mathrm{Cs}_{2}\mathrm{TeI}_{6}4.261.731.3550.9845.30
Cs2SnI6\mathrm{Cs}_{2}\mathrm{SnI}_{6}3.521.501.2747.4371.12

Table 4. Calculated polaron parameters corresponding to electrons in Cs2BI6\mathrm{Cs}_{2}\mathrm{BI}_{6} perovskites. ωLO\omega_{\mathrm{LO}} (THz), αe\alpha_{\mathrm{e}}, mPm_{\mathrm{P}}, lPl_{\mathrm{P}} (Å) and μP\mu_{\mathrm{P}} (cm2V−1s−1\mathrm{cm}^{2}\mathrm{V}^{-1}\mathrm{s}^{-1}) are the optical phonon frequency, Fröhlich coupling constant, polaron mass, polaron radii and polaron mobility, respectively.

Cs2_2PtI6_6 > Cs2_2PdI6_6 > Cs2_2TeI6_6 > Cs2_2SnI6_6. The ELF and strong electron-phonon coupling validate the presence of anharmonicity in our considered perovskites. Also, the heavy atoms present in the system act as phonon rattlers and help suppress the lattice thermal conductivity effectively. This leads to their effective utilization in high-performance thermoelectric device applications.

Configurationsm∗m^{*}ε∞\varepsilon_{\infty}εstatic\varepsilon_{\mathrm{static}}
mathrmCs2mathrmPtI6\\mathrm{Cs}_{2}\\mathrm{PtI}_{6}0.493.414.55
mathrmCs2mathrmPdI6\\mathrm{Cs}_{2}\\mathrm{PdI}_{6}0.472.803.30
mathrmCs2mathrmTeI6\\mathrm{Cs}_{2}\\mathrm{TeI}_{6}0.403.595.55
mathrmCs2mathrmSnI6\\mathrm{Cs}_{2}\\mathrm{SnI}_{6}0.332.673.46

Table 3. Effective mass of electrons m∗m^{*} in terms of rest mass of electron m0m_{0}, electronic dielectric constant ε∞\varepsilon_{\infty} and ionic static dielectric constant εstatic\varepsilon_{\mathrm{static}} of Cs2BI6\mathrm{Cs}_{2}\mathrm{BI}_{6} perovskites.

In summary, we have carried out an exhaustive study to investigate the structural, elastic and thermoelectric properties of Cs2BI6\mathrm{Cs}_2\mathrm{BI}_6 (B=Pt,Pd,Te,Sn\mathrm{B} = \mathrm{Pt}, \mathrm{Pd}, \mathrm{Te}, \mathrm{Sn}) vacancy-ordered perovskites under the framework of density functional theory. The Pugh’s and Poisson’s ratios show the ductile nature of the perovskites. Also, the negative Gibbs free energies and phonon bandstructures confirm the stability of these perovskites. The band gaps calculated using different εxc\varepsilon_{xc} functionals appear in visible region, which is advantageous for energy-harvesting properties. The zTzT values for Cs2PtI6\mathrm{Cs}_2\mathrm{PtI}_6, Cs2PdI6\mathrm{Cs}_2\mathrm{PdI}_6, Cs2TeI6\mathrm{Cs}_2\mathrm{TeI}_6 and Cs2SnI6\mathrm{Cs}_2\mathrm{SnI}_6 are 0.88, 0.85, 0.95 and 0.78, respectively, which show that these perovskites are promising for thermoelectric applications. To examine the role of anharmonicity, the ELFs are plotted for these perovskites, which indicates the presence of lattice anharmonicity. The calculation of the harmonic and anharmonic energy confirm the anharmonicity in this class of materials. As a result of anharmonicity, these compounds have strong electron-phonon coupling and the strength of this coupling is quantified using Fröhlich’s polaron model. The phonon-phonon scattering owing to the presence of anharmonicity and heavy atoms acting as phonon rattlers results in low thermal conductivity and better thermoelectric properties.

Computational Methods

All the DFT37,38 calculations have been performed using the Vienna ab initio simulation package (VASP)77,78. The ion-electron interactions in all the elemental constituents are described using the projector augmented wave (PAW)79,80 method as implemented in VASP. The structural optimization is performed using generalized gradient approximation (PBE)49 and optB8681 εxc\varepsilon_{xc} functional with vdW corrections, relaxing all ions until Hellmann-Feynman forces are less than 0.001 eV/Å. The two-body vdW interaction, devised by Tkatchenko-Scheffler has been used during optimization82. The cutoff energy of 600 eV is used for the plane wave basis set such that the total energy calculations are converged within 10−510^{-5} eV. The Γ\Gamma-centered 4×4×44 \times4 \times4 kk-grid is used to sample the Brillouin zone except when stated otherwise. The band gap is calculated using hybrid εxc\varepsilon_{xc} functional (HSE06)50,51 and many-body perturbation theory. Note that the single-shot GW (G0W0G_{0}W_{0})39,40 calculations have been performed on top of the orbitals obtained from PBE/HSE06 (with SOC) εxc\varepsilon_{\mathrm{xc}} functional [G0_{0}W0_{0}@PBE+SOC/HSE06+SOC]. The number of bands is set to four times the number of occupied bands. The polarizability calculation is performed on a grid of 50 frequency points. The effective mass is calculated by SUMO83 using a parabolic fitting of the band edges. The phonon calculation is performed for 2×2×22 \times2 \times2 supercell using the PHONOPY package84,85. The BoltzTrap Code58 based on Boltzmann transport theory and phono3py86 are used to evaluate thermoelectric properties. The self-consistent process described by Hellwarth is used to calculate the electron-phonon coupling strength41. Static dielectric constant is calculated using density functional perturbation theory (DFPT)73 with a denser kk-grid (6×6×66 \times6 \times6). To calculate the anharmonic energy, we have carried out ab initio molecular dynamics (AIMD) simulation employing Nose-Hoover thermostat71 and pyHMA package72.

Acknowledgement

P.B. acknowledges UGC, India, for the senior research fellowship [grant no. 1392/(CSIR-UGC NET JUNE 2018)]. M.J. acknowledges CSIR, India, for the senior research fellowship [Grant No. 09/086(1344)/2018-EMR-I]. S.S. acknowledges CSIR, India, for the senior research fellowship [grant no. 09/086(1432)/2019-EMR-I]. S.B. acknowledges financial support from SERB under a core research grant (Grant No. CRG/2019/000647) to set up his High Performance Computing (HPC) facility “Veena” at IIT Delhi for computational resources.

Supporting Information Available

See supplementary material for the details of optimized lattice parameters, Goldschmidt tolerance factor (tt), octahedral factor (μ\mu) and new tolerance factor (τ\tau), Gibbs free energy (ΔG\Delta G), mechanical properties, bandstructures, projected density of states (pDOS), kk-grid convergence, computational details of Seebeck coefficient (SS) and thermoelectric figure of merit (zTzT), thermal conductivity (κ\kappa), harmonic (UhU_{\mathrm{h}}) and anharmonic energy (UahU_{\mathrm{ah}}), effective mass and polaron parameters of Cs2_2BI6_6 perovskites vacancy-ordered perovskites.

Vacancy-Ordered Double Perovskites Cs2BI6\mathrm{Cs_2BI_6} (B = Pt, Pd, Te, Sn): An Emerging Class of Thermoelectric Materials

Preeti Bhumla; Manjari Jain; Sajjan Sheoran; Saswata Bhattacharya

Phone: +91-11-2659 1359. Fax: +91-11-2658 2037

Supplemental Material

  1. Lattice parameters of Cs2BI6\mathrm{Cs}_2\mathrm{BI}_6 (B = Pt, Pd, Te, Sn) vacancy-ordered double perovskites

  1. Goldschmidt tolerance factor (tt), octahedral factor (μ\mu) and new tolerance factor (τ\tau) of Cs2BI6\mathrm{Cs}_2\mathrm{BI}_6 (B = Pt, Pd, Te, Sn) vacancy-ordered double perovskites

  1. Gibbs free energy (ΔG\Delta G) of Cs2BI6\mathrm{Cs}_2\mathrm{BI}_6 (B = Pt, Pd, Te, Sn) vacancy-ordered double perovskites

  1. Mechanical properties of Cs2BI6\mathrm{Cs}_2\mathrm{BI}_6 (B = Pt, Pd, Te, Sn) vacancy-ordered double perovskites

  1. Band structures of Cs2BI6\mathrm{Cs}_2\mathrm{BI}_6 (B = Pt, Pd, Te, Sn) vacancy-ordered double perovskites

  1. Projected density of states (pDOS) of Cs2BI6\mathrm{Cs}_2\mathrm{BI}_6 (B = Pt, Pd, Te, Sn) vacancy-ordered double perovskites

  1. kk-grid convergence in Cs2BI6\mathrm{Cs}_2\mathrm{BI}_6 (B = Pt, Pd, Te, Sn) vacancy-ordered double perovskites

  1. Computational details for calculation of Seebeck coefficient (SS) and thermoelectric figure of merit (zTzT) in Cs2BI6\mathrm{Cs}_2\mathrm{BI}_6 (B = Pt, Pd, Te, Sn) vacancy-ordered double perovskites

  1. Thermal conductivity (κ\kappa) of Cs2BI6\mathrm{Cs}_2\mathrm{BI}_6 (B = Pt, Pd, Te, Sn) vacancy-ordered double perovskites

  1. Calculation of harmonic (UhU_{\mathrm{h}}) and anharmonic energy (UahU_{\mathrm{ah}}) in Cs2BI6\mathrm{Cs}_2\mathrm{BI}_6 (B = Pt, Pd, Te, Sn) vacancy-ordered double perovskites

  1. Effective mass calculation of Cs2PtI6\mathrm{Cs}_2\mathrm{PtI}_6 vacancy-ordered double perovskite

  1. Calculation of longitudinal optical phonon frequency (ωLO\omega_{\mathrm{LO}}), effective mass of polaron (mPm_{\mathrm{P}}), polaron radii (lPl_{\mathrm{P}}) and polaron mobility (μP\mu_{\mathrm{P}})

Lattice parameters of Cs2BI6\mathrm{Cs}_{2}\mathrm{BI}_{6} (B = Pt, Pd, Te, Sn) vacancy-ordered double perovskites

Table S1 shows the lattice parameters of vacancy-ordered double perovskites calculated using PBE and optB86 exchange-correlation (εxc\varepsilon_{xc}) functionals along with van der Waals (vdW) forces. The two-body vdW interaction, devised by Tkatchenko-Scheffler, has been used during optimization. The optB86-vdW εxc\varepsilon_{xc} functional reproduces the lattice parameters of vacancy-ordered double perovskites close to experimental ones.

Goldschmidt tolerance factor (tt), octahedral factor (μ\mu) and new tolerance factor (τ\tau) of Cs2BI6\mathrm{Cs}_2\mathrm{BI}_6 (B=Pt\mathrm{B} = \mathrm{Pt}, Pd\mathrm{Pd}, Te\mathrm{Te}, Sn\mathrm{Sn}) vacancy-ordered double perovskites

Goldschmidt tolerance factor (tt) and octahedral factor (μ\mu) are given as:

t=rA+rX2(rB+rX),μ=rBrX(5)t = \frac{r_A + r_X}{\sqrt{2}(r_B + r_X)}, \quad\mu= \frac{r_B}{r_X} \tag*{(5)}

where rAr_A, rBr_B, and rXr_X are the Shannon ionic radii[4] for AA, BB and XX ions, respectively. The Shannon radii for Cs+\mathrm{Cs}^{+}, Pt4+\mathrm{Pt}^{4+}, Pd4+\mathrm{Pd}^{4+}, Te4+\mathrm{Te}^{4+}, Sn4+\mathrm{Sn}^{4+} and I−\mathrm{I}^{-} are 1.88, 0.63, 0.62, 0.69 and 0.97 Å, respectively. For stable cubic perovskites, the ranges of tt and μ\mu are 0.8≤t≤1.00.8 \le t \le1.0 and 0.29≤μ≤0.550.29 \le\mu\le0.55. The calculated values given in Table S2 show that the considered perovskites are stable in cubic structures. Recently, Bartel et al. have reported a new tolerance factor (τ\tau) to predict the stability of a perovskite, which is given as:

Configurationsttμ\muτ\tau
Cs2PtI6Cs_{2}PtI_{6}1.020.285.25
Cs2PdI6Cs_{2}PdI_{6}1.020.285.31
Cs2TeI6Cs_{2}TeI_{6}0.910.444.19
Cs2SnI6Cs_{2}SnI_{6}0.990.314.90

Table S2. Goldschmidt tolerance factor (tt), octahedral factor (μ\mu) and new tolerance factor (τ\tau) of Cs2BI6Cs_{2}BI_{6} vacancy-ordered double perovskites

τ=rXrB−nA(nA−rA/rBln⁡(rA/rB))(6)\tau= \frac{r_X}{r_B} - n_A \left(n_A - \frac{r_A/r_B}{\ln(r_A/r_B)}\right) \tag*{(6)}

where nAn_A is the oxidation state of cation AA, rir_i is the ionic radius of ion ii and rA>rBr_A > r_B by definition. τ<4.18\tau< 4.18 indicates the formation of perovskite (92% accuracy). Since the range of τ\tau is calculated for ABX3\mathrm{ABX}_3 and A2BB′X6\mathrm{A}_2\mathrm{BB}'\mathrm{X}_6 double perovskites, this may deviate for vacancy-ordered double perovskites (due to defects).

Gibbs free energy (GG) of Cs2BI6\mathrm{Cs}_2\mathrm{BI}_6 (B=Pt,Pd,Te,Sn\mathrm{B} = \mathrm{Pt}, \mathrm{Pd}, \mathrm{Te}, \mathrm{Sn}) vacancy-ordered double perovskites

Reactions for decomposition of Cs2BI6\mathrm{Cs}_2\mathrm{BI}_6 vacancy-ordered double perovskites:

Cs2PtI6⟶2CsI+PtI4\mathrm{Cs}_2\mathrm{PtI}_6 \longrightarrow2\mathrm{CsI} + \mathrm{PtI}_4
ΔHD=E(Cs2PtI6)−2E(CsI)−E(PtI4)\Delta H_{\mathrm{D}} = E(\mathrm{Cs}_2\mathrm{PtI}_6) - 2E(\mathrm{CsI}) - E(\mathrm{PtI}_4)
Cs2PdI6⟶CsI3+PdI2+CsI\mathrm{Cs}_2\mathrm{PdI}_6 \longrightarrow\mathrm{CsI}_3 + \mathrm{PdI}_2 + \mathrm{CsI}
ΔHD=E(Cs2PdI6)−E(CsI3)−E(PdI2)−E(CsI)\Delta H_{\mathrm{D}} = E(\mathrm{Cs}_2\mathrm{PdI}_6) - E(\mathrm{CsI}_3) - E(\mathrm{PdI}_2) - E(\mathrm{CsI})
Cs2TeI6⟶2CsI+TeI4\mathrm{Cs}_2\mathrm{TeI}_6 \longrightarrow2\mathrm{CsI} + \mathrm{TeI}_4
ΔHD=E(Cs2TeI6)−2E(CsI)−E(TeI4)\Delta H_{\mathrm{D}} = E(\mathrm{Cs}_2\mathrm{TeI}_6) - 2E(\mathrm{CsI}) - E(\mathrm{TeI}_4)
Cs2SnI6⟶2CsI+SnI4\mathrm{Cs}_2\mathrm{SnI}_6 \longrightarrow2\mathrm{CsI} + \mathrm{SnI}_4
ΔHD=E(Cs2SnI6)−2E(CsI)−E(SnI4)\Delta H_{\mathrm{D}} = E(\mathrm{Cs}_2\mathrm{SnI}_6) - 2E(\mathrm{CsI}) - E(\mathrm{SnI}_4)

Here E(Cs2BI6)E(\mathrm{Cs}_2\mathrm{BI}_6), E(CsI3)E(\mathrm{CsI}_3), E(CsI)E(\mathrm{CsI}) and E(BI4)E(\mathrm{BI}_4) are respectively the total DFT energies of Cs2BI6\mathrm{Cs}_2\mathrm{BI}_6, CsI3\mathrm{CsI}_3, CsI\mathrm{CsI} and BI4\mathrm{BI}_4 and ΔHD\Delta H_{\mathrm{D}} is the decomposition energy. To determine the thermodynamic stability of Cs2BI6\mathrm{Cs}_2\mathrm{BI}_6 perovskites at room temperature, we have calculated the Gibbs free energy GG as a function of temperature TT and pressure PP given by the following equation:

G(T,P)=F(T,V)+PV(7)G(T,P) = F(T,V) + PV \tag*{(7)}

Here F(T,V)F(T,V) is the Helmholtz free energy as a function of temperature TT and volume VV. To calculate the PVPV term, we varied the volume of the system and calculated the total energies at different volume. After that, we fitted the data into the empirical equation of state (EOS) to obtain the E(V)E(V) function and hence calculated the pressure by P=−(∂E/∂V)TP = -(\partial E/\partial V)_T. According to adiabatic approximation, F(T,V)F(T,V) can be written in terms of ionic vibrational and electronic contributions as follows:

F(T,V)=Fvib(T,V)+Fel(T,V)≃Fvib(T,V)+E(T=0K,V)(8)F(T,V)=F_{vib}(T,V)+F_{el}(T,V)\simeq F_{vib}(T,V)+E(T=0\mathrm{K},V) \tag*{(8)}

In the electronic Helmholtz free energy equation, the TSelTS_{el} term is ignored as the electronic temperature effect is negligible for non-metallic systems near room temperature and thus

Fel(T,V)=E(T=0K,V)−TSel≃E(T=0K,V).F_{el}(T,V)=E(T=0\mathrm{K},V)-TS_{el}\simeq E(T=0\mathrm{K},V).

Within quasiharmonic approximation (QHA), the ionic Helmholtz free energy FvibF_{vib} can be given as follows:

Fvib=3MkBT∫0ωLln⁡{2sinh⁡[ℏω(V0)2kBT]}g(ω)dω(9)F_{vib}=3Mk_{\mathrm{B}}T\int_{0}^{\omega_{\mathrm{L}}}\ln\left\{2\sinh\left[\frac{\hbar\omega(V_{0})}{2k_{\mathrm{B}}T}\right]\right\}g(\omega)\mathrm{d}\omega \tag*{(9)}

where MM is the atomic mass, ℏ\hbar is the reduced Planck’s constant, kBk_{\mathrm{B}} is the Boltzmann constant and ωi\omega_i is the phonon frequency and g(ω)g(\omega) is the normalized phonon DOS. Subsequently, the thermodynamic stability of Cs2_2BI6_6 perovskites is estimated by calculating the Gibbs free energy difference as follows:

ΔG(T,P)=GCs2BI6(T,P)−[2GCsI(T,P)+GBI4(T,P)](10)\Delta G(T,P)=G_{\mathrm{Cs_{2}BI_{6}}}(T,P)-\left[2G_{\mathrm{CsI}}(T,P)+G_{\mathrm{BI_{4}}}(T,P)\right] \tag*{(10)}

The ΔG(T,P)\Delta G(T,P) values are listed in Table S3. The negative values confirm the thermodynamic stability of these vacancy-ordered double perovskites (see Figure S1).

Image not extracted

Figure S1. ΔG\Delta G (TT, PP) of Cs2_2BI6_6 vacancy-ordered double perovskites calculated using PBE and HSE06 εxc\varepsilon_{xc} functionals.

Mechanical properties of Cs2BI6\mathrm{Cs}_{2}\mathrm{B}\mathrm{I}_{6} (B=Pt\mathrm{B} = \mathrm{Pt}, Pd\mathrm{Pd}, Te\mathrm{Te}, Sn\mathrm{Sn}) vacancy-ordered double perovskites

The Voigt bulk (BVB_{V}) and shear (GVG_{V}) moduli, Reuss bulk (BRB_{R}) and shear (GRG_{R}) moduli are calculated using the following relations:

BV=BR=C11+2C123(11)B_{V} = B_{R} = \frac{C_{11} + 2C_{12}}{3} \tag*{(11)}
GV=C11−C12+3C445(12)G_{V} = \frac{C_{11} - C_{12} + 3C_{44}}{5} \tag*{(12)}
GR=5(C11−C12)C444C44+3(C11−C12)(13)G_{R} = \frac{5(C_{11} - C_{12})C_{44}}{4C_{44} + 3(C_{11} - C_{12})} \tag*{(13)}

According to Voigt–Reuss–Hill approximations,[5] Young’s modulus (EE) and Poisson’s ratio (ν\nu) are obtained as:

B=BV+BR2,G=GV+GR2(14)B = \frac{B_{V} + B_{R}}{2}, \qquad G = \frac{G_{V} + G_{R}}{2} \tag*{(14)}
E=9BG3B+G(15)E = \frac{9BG}{3B + G} \tag*{(15)}
ν=3B−2G3B+G(16)\nu= \frac{3B - 2G}{3B + G} \tag*{(16)}

The ductility of these perovskites is studied in terms of Pugh’s (B/GB/G) and Poisson’s ratio (ν\nu). If the B/GB/G is found to be greater (or lower) than 1.75, the material is ductile (or brittle). For ν\nu, the limiting value is 0.26. The calculated values of B/GB/G and ν\nu show that the studied vacancy-ordered double perovskites are ductile.

Band structures of Cs2BI6\mathrm{Cs}_{2}\mathrm{BI}_{6} (B=Pt\mathrm{B} = \mathrm{Pt}, Pd\mathrm{Pd}, Te\mathrm{Te}, Sn\mathrm{Sn}) vacancy-ordered double perovskites

The band structures for Cs2PtI6\mathrm{Cs}_{2}\mathrm{PtI}_{6}, Cs2PdI6\mathrm{Cs}_{2}\mathrm{PdI}_{6}, Cs2TeI6\mathrm{Cs}_{2}\mathrm{TeI}_{6} and Cs2SnI6\mathrm{Cs}_{2}\mathrm{SnI}_{6} are calculated using HSE06+SOC εxc\varepsilon_{xc} functional (see Figure S2) and the band gaps of these perovskites are 0.96, 0.51, 1.49 and 0.70 eV, respectively.

Image not extracted

Figure S2. Band structures of (a) Cs2PtI6\mathrm{Cs}_{2}\mathrm{PtI}_{6}, (b) Cs2PdI6\mathrm{Cs}_{2}\mathrm{PdI}_{6}, (c) Cs2TeI6\mathrm{Cs}_{2}\mathrm{TeI}_{6} and (d) Cs2SnI6\mathrm{Cs}_{2}\mathrm{SnI}_{6} vacancy-ordered double perovskites, calculated using HSE06+SOC εxc\varepsilon_{xc} functional.

The band structures for Cs2PtI6\mathrm{Cs}_{2}\mathrm{PtI}_{6} and Cs2SnI6\mathrm{Cs}_{2}\mathrm{SnI}_{6} are calculated using G0W0\mathrm{G}_{0}\mathrm{W}_{0}@PBE+SOC εxc\varepsilon_{xc} functional (see Figure S3) and the band gaps of these perovskites are 1.35 and 1.23 eV, respectively.

Image not extracted

Figure S3. Band structures of (a) Cs2PtI6\mathrm{Cs}_{2}\mathrm{PtI}_{6} and (b) Cs2SnI6\mathrm{Cs}_{2}\mathrm{SnI}_{6} vacancy-ordered double perovskites, calculated using G0W0\mathrm{G}_{0}\mathrm{W}_{0}@PBE+SOC.

Projected density of states (pDOS) of Cs2BI6\mathrm{Cs}_{2}\mathrm{BI}_{6} (B = Pt, Pd, Te, Sn) vacancy-ordered double perovskites

Figure S4 shows the pDOS of all four vacancy-ordered double perovskites. The valence band maximum (VBM) of these perovskites are mostly dominated by I-p orbitals, while conduction band minimum (CBm) are contributed by I-p orbitals along with Pt-d, Pd-d, Te-p and Sn-s orbitals in Cs2PtI6\mathrm{Cs}_{2}\mathrm{PtI}_{6}, Cs2PdI6\mathrm{Cs}_{2}\mathrm{PdI}_{6}, Cs2TeI6\mathrm{Cs}_{2}\mathrm{TeI}_{6} and Cs2SnI6\mathrm{Cs}_{2}\mathrm{SnI}_{6}, respectively. The VBM is also composed of Pt-d, Pd-d and Te-s orbitals in Cs2PtI6\mathrm{Cs}_{2}\mathrm{PtI}_{6}, Cs2PdI6\mathrm{Cs}_{2}\mathrm{PdI}_{6} and Cs2TeI6\mathrm{Cs}_{2}\mathrm{TeI}_{6}, respectively. There is a strong hybridization of Te-p and I-p orbitals in Cs2TeI6\mathrm{Cs}_{2}\mathrm{TeI}_{6} and Sn-s and I-p orbitals in Cs2SnI6\mathrm{Cs}_{2}\mathrm{SnI}_{6}.

Image not extracted

Figure S4. Projected density of states (pDOS) of (a) Cs2PtI6\mathrm{Cs}_{2}\mathrm{PtI}_{6}, (b) Cs2PdI6\mathrm{Cs}_{2}\mathrm{PdI}_{6}, (c) Cs2TeI6\mathrm{Cs}_{2}\mathrm{TeI}_{6} and (d) Cs2SnI6\mathrm{Cs}_{2}\mathrm{SnI}_{6} vacancy-ordered double perovskites, calculated using HSE06+SOC εxc\varepsilon_{xc} functional.

kk-grid convergence in Cs2BI6\mathrm{Cs}_2\mathrm{BI}_6 (B = Pt, Pd, Te, Sn) vacancy-ordered double perovskites

For the reliability of the calculations, we have checked the convergence of the properties viz., energy (EE), Seebeck coefficient (SS), imaginary (Im⁡(ε)\operatorname{Im}(\varepsilon)) and real (Re⁡(ε)\operatorname{Re}(\varepsilon)) part of the dielectric function in the vacancy-ordered double perovskites with kk-grid. The energies of the Cs2BI6\mathrm{Cs}_2\mathrm{BI}_6 perovskites in Table S4 show that 4×4×44\times4\times4 kk-grid is sufficient to calculate EE. Also, the values of SS with 4×4×44\times4\times4 and 6×6×66\times6\times6 kk-grids are nearly similar and are listed in Table S5.

EE (eV)
Configurations2×2×22\times2\times23×3×33\times3\times34×4×44\times4\times45×5×55\times5\times56×6×66\times6\times6
Cs2PtI6\mathrm{Cs}_2\mathrm{PtI}_6-110.5206-110.5481-110.5493-110.5493-110.5494
Cs2PdI6\mathrm{Cs}_2\mathrm{PdI}_6-106.3718-106.4057-106.4056-106.4057-106.4052
Cs2TeI6\mathrm{Cs}_2\mathrm{TeI}_6-98.7717-98.7872-98.7873-98.7874-98.7873
Cs2SnI6\mathrm{Cs}_2\mathrm{SnI}_6-105.2440-105.2542-105.2547-105.2550-105.2532

Table S4. Energies (eV) of Cs2BI6\mathrm{Cs}_2\mathrm{BI}_6 (B = Pt, Pd, Te, Sn) vacancy-ordered double perovskites at different kk-grids calculated using PBE εxc\varepsilon_{xc} functional.

SS (μ\muV/K)
Configurations4×4×44\times4\times46×6×66\times6\times6
Cs2PtI6\mathrm{Cs}_2\mathrm{PtI}_6710.01710.06
Cs2PdI6\mathrm{Cs}_2\mathrm{PdI}_6148.23148.31
Cs2TeI6\mathrm{Cs}_2\mathrm{TeI}_6190.11190.18
Cs2SnI6\mathrm{Cs}_2\mathrm{SnI}_6290.52290.59

Table S5. Seebeck coefficient (μ\muV/K) of Cs2BI6\mathrm{Cs}_2\mathrm{BI}_6 (B = Pt, Pd, Te, Sn) vacancy-ordered double perovskites at different kk-grids calculated using HSE06 εxc\varepsilon_{xc} functional.

We have also checked the kk-grid convergence for imaginary (Im⁡(ε)\operatorname{Im}(\varepsilon)) and real part (Re⁡(ε)\operatorname{Re}(\varepsilon)) of the dielectric function. Figure S5 (a) and (b) show the variation of Im⁡(ε)\operatorname{Im}(\varepsilon) and Re⁡(ε)\operatorname{Re}(\varepsilon) for

Image not extracted

Figure S5. Imaginary (Im⁡(ε)\operatorname{Im}(\varepsilon)) and real (Re⁡(ε)\operatorname{Re}(\varepsilon)) part of the dielectric function for Cs2TeI6\mathrm{Cs}_{2}\mathrm{TeI}_{6} vacancy-ordered double perovskite calculated using PBE εxc\varepsilon_{xc} functional.

Cs2TeI6\mathrm{Cs}_{2}\mathrm{TeI}_{6} vacancy-ordered double perovskite. On increasing the kk-grid, no shift is observed in the first peak position of Im⁡(ε)\operatorname{Im}(\varepsilon) part of dielectric function. Hence, the 4×4×44 \times4 \times4 kk-grid is sufficient to compute quasiparticle (G0W0\mathrm{G}_{0}\mathrm{W}_{0}) band gap. Therefore, we have calculated all the properties with 4×4×44 \times4 \times4 kk-grid except when stated otherwise.

Computational details for calculation of Seebeck coefficient (SS) and thermoelectric figure of merit (zTzT) in Cs2BI6\mathrm{Cs}_{2}\mathrm{B}\mathrm{I}_{6} (B=Pt,Pd,Te,Sn\mathrm{B} = \mathrm{Pt}, \mathrm{Pd}, \mathrm{Te}, \mathrm{Sn}) vacancy-ordered double perovskites

The thermoelectric properties viz., Seebeck coefficient (SS) and thermoelectric figure of merit (zTzT) are calculated using the Boltzmann transport equation and the rigid band approach as implemented in the BoltzTraP code.[6] The cutoff energy of 600 eV is used for the plane wave basis set such that the total energy calculations are converged within 10−510^{-5} eV. The Γ\Gamma-centered 4×4×44 \times4 \times4 kk-grid is used to sample the Brillouin zone after checking the convergence with kk-grids (see Table S6). Seebeck coefficient (SS) is determined as a function of chemical potential (μ\mu) for Cs2BI6\mathrm{Cs}_{2}\mathrm{B}\mathrm{I}_{6} perovskites. After that, we have plotted zTzT as a function of temperature (TT). The “average zTzT” is calculated by taking the mean of all zTzT values at different temperatures.

SS (μV/K\mu\mathrm{V}/\mathrm{K})
Configurations4×4×44 \times4 \times46×6×66 \times6 \times6
Cs2PtI6\mathrm{Cs}_{2}\mathrm{Pt}\mathrm{I}_{6}710.01710.06
Cs2PdI6\mathrm{Cs}_{2}\mathrm{Pd}\mathrm{I}_{6}148.23148.31
Cs2TeI6\mathrm{Cs}_{2}\mathrm{Te}\mathrm{I}_{6}190.11190.18
Cs2SnI6\mathrm{Cs}_{2}\mathrm{Sn}\mathrm{I}_{6}290.52290.59

Table S6. Seebeck coefficient (SS) of Cs2BI6\mathrm{Cs}_{2}\mathrm{B}\mathrm{I}_{6} (B=Pt,Pd,Te,Sn\mathrm{B} = \mathrm{Pt}, \mathrm{Pd}, \mathrm{Te}, \mathrm{Sn}) vacancy-ordered double perovskites at different kk-grids calculated using HSE06 εxc\varepsilon_{xc} functional.

Thermal conductivity (κ\kappa) of Cs2BI6\mathrm{Cs}_{2}\mathrm{BI}_{6} (B=Pt\mathrm{B} = \mathrm{Pt}, Pd\mathrm{Pd}, Te\mathrm{Te}, Sn\mathrm{Sn}) vacancy-ordered double perovskites

Image not extracted

Figure S6. Calculated (a) electronic thermal conductivity, (b) lattice thermal conductivity and (c) total thermal conductivity in Cs2BI6\mathrm{Cs}_{2}\mathrm{BI}_{6} vacancy-ordered double perovskites, calculated using PBE εxc\varepsilon_{xc} functional.

Calculation of harmonic (UhU_h) and anharmonic energies (UahU_{ah}) in Cs2_2BI6_6 (B = Pt, Pd, Te, Sn) vacancy-ordered double perovskites

Harmonic energy (UhU_h) is calculated as per the following equation:

Uh=∑ihνi2+∑ikBTln⁡[1−exp⁡(hνikBT)](17)U_h = \sum_i \frac{h\nu_i}{2} + \sum_i k_BT \ln\left[1-\exp\left(\frac{h\nu_i}{k_BT}\right)\right] \tag*{(17)}

where kBk_B, hh, and TT are respectively the Boltzmann constant, Planck’s constant, and temperature. νi\nu_i represent frequencies of vibration, which we get from vibration calculation.

To calculate the anharmonic energy, we have performed AIMD calculations at 250, 500, 750, 1000, 1250, 1500, 1750 and 2000 K temperatures using Nose-Hoover thermostat with time and time-step being 8 ps and 1 fs, respectively. This data is then supplied to a post-processing python package pyHMA, which determines the anharmonic energy according to the relation:

Uah=⟨U+12F⋅Δr⟩−Ulat(18)U_{ah} = \left\langle U + \frac{1}{2}\mathbf{F}\cdot\Delta\mathbf{r}\right\rangle- U_{lat} \tag*{(18)}

where the F\mathbf{F} vector represents the forces on all atoms, and Δr\Delta\mathbf{r} is the displacement of each atom from its lattice (equilibrium) site. The pyHMA package reads MD data from output file (vasprun.xml) to compute anharmonic energy. The package can be downloaded from the development version on GitHub.

Effective mass calculation of Cs2PtI6\mathrm{Cs}_2\mathrm{PtI}_6 vacancy-ordered double perovskite

Calculation of effective masses using SUMO package.

Electron effective masses:

mem_e: 0.491 | band 284 | [0.00, 0.00, 0.00] (Γ\Gamma) →\to [0.50, 0.50, 0.50] (L)

mem_e: 0.489 | band 284 | [0.00, 0.00, 0.00] (Γ\Gamma) →\to [0.50, 0.00, 0.50] (X)

mem_e: 0.491 | band 285 | [0.00, 0.00, 0.00] (Γ\Gamma) →\to [0.50, 0.50, 050] (L)

mem_e: 0.489 | band 285 | [0.00, 0.00, 0.00] (Γ\Gamma) →\to [0.50, 0.00, 0.50] (X)

mem_e: 0.491 | band 286 | [0.00, 0.00, 0.00] (Γ\Gamma) →\to [0.50, 0.50, 0.50] (L)

mem_e: 0.489 | band 286 | [0.00, 0.00, 0.00] (Γ\Gamma) →\to [0.50, 0.00, 0.50] (X)

To calculate the average electron mass at Γ\Gamma-point, we have taken the average of masses along Γ→\Gamma\to L and Γ→\Gamma\to X directions.

Average effective electron mass = 0.49 m0m_0

Calculation of longitudinal optical phonon frequency (ωLO)(\omega_{\mathrm{LO}}), effective mass of polaron (mP)(m_{\mathrm{P}}), polaron radii (lP)(l_{\mathrm{P}}) and polaron mobility (μP)(\mu_{\mathrm{P}})

The average frequency of the LO (Longitudinal Optical) modes is calculated from infrared (IR) phonon frequencies obtained using the density functional perturbation theory (DFPT). The free electrons interact with lattice, which consists of more than one infrared-active optical phonon mode. To get an effective longitudinal optical phonon frequency (ωLO)(\omega_{\mathrm{LO}}), we have used the ansatz of Hellwarth and Biaggio. [7] The oscillator strength WiW_i of the LO phonon modes is calculated using the LO-TO (Transverse Optical) splitting as given by the following equation:

Wi2=1ϵ∞(ωLO,i2−ωTO,i2)(19)W_i^2 = \frac{1}{\epsilon_\infty}\left(\omega_{\mathrm{LO},i}^2-\omega_{\mathrm{TO},i}^2\right) \tag*{(19)}

with subsequent quadratic mean (W2=∑Wi2)(W^2 = \sum W_i^2) over single oscillator strengths to obtain the oscillator strength of the single phonon branch WW. The frequency ωLO\omega_{\mathrm{LO}} (in wave numbers) of this branch is then calculated by solving

W2ωLOcoth⁡(hcωLO2kBT)=∑i=12Wi2ωLO,icoth⁡(hcωLO,i2kBT)(20)\frac{W^2}{\omega_{\mathrm{LO}}}\coth\left(\frac{hc\omega_{\mathrm{LO}}}{2k_{\mathrm{B}}T}\right) = \sum_{i=1}^{2}\frac{W_i^2}{\omega_{\mathrm{LO},i}}\coth\left(\frac{hc\omega_{\mathrm{LO},i}}{2k_{\mathrm{B}}T}\right) \tag*{(20)}

Further, within the Fröhlich’s polaron theory, as extended by Feynman, the effective mass of polaron (mp)(m_{\mathrm{p}}) [8] can be calculated as:

mP=m∗(1+α6+α240+……)(21)m_{\mathrm{P}} = m^*\left(1+\frac{\alpha}{6}+\frac{\alpha^2}{40}+\ldots\ldots\right) \tag*{(21)}

where m∗m^{*} is the effective mass of electron in terms of rest mass of electron m0m_{0}. The polaron radius (lP)(l_{\mathrm{P}})1 can be determined as:

lP=h2cm∗ωLO(22)l_{\mathrm{P}} = \sqrt{\frac{h}{2cm^{*}\omega_{\mathrm{LO}}}} \tag*{(22)}

where hh is the Planck’s constant and cc is the speed of light. Now, according to Hellwarth polaron model,2 the polaron mobility (μP)(\mu_{\mathrm{P}}) is defined as follows:

μP=3πe2πcωLOm∗αsinh⁡(β/2)β5/2w3v31K(23)\mu_{\mathrm{P}} = \frac{3\sqrt{\pi}e}{2\pi c\omega_{\mathrm{LO}}m^{*}\alpha}\frac{\sinh(\beta/2)}{\beta^{5/2}}\frac{w^{3}}{v^{3}}\frac{1}{K} \tag*{(23)}

where, β=hcωLOkBT\beta= \frac{hc\omega_{\mathrm{LO}}}{k_{\mathrm{B}}T}, ee is the electronic charge, m∗m^{*} is the effective mass of charge carrier, ww and vv correspond to temperature dependent variational parameters. KK is a function of vv, ww, and β\beta defined as follows:

K(a,b)=∫0∞du[u2+a2−bcos⁡(vu)]−3/2cos⁡(u)(24)K(a,b) = \int_{0}^{\infty} du \left[u^{2}+a^{2}-b\cos(vu)\right]^{-3/2}\cos(u) \tag*{(24)}

Here, a2a^{2} and bb are calculated as:

a2=(β2)2+v2−w2w2vβcoth⁡(βv/2)(25)a^{2} = \left(\frac{\beta}{2}\right)^{2}+\frac{v^{2}-w^{2}}{w^{2}v}\beta\coth(\beta v/2) \tag*{(25)}
b=v2−w2w2vβsinh⁡(βv/2)(26)b = \frac{v^{2}-w^{2}}{w^{2}v}\frac{\beta}{\sinh(\beta v/2)} \tag*{(26)}

References

  1. [1]Faizan, M.; Bhamu, K.; Murtaza, G.; He, X.; Kulhari, N.; AL-Anazy, M. M.; Khan, S. H. Electronic and optical properties of vacancy ordered double perovskites A₂BX₆ (A= Rb, Cs; B= Sn, Pd, Pt; and X= Cl, Br, I): a first principles study. Sci. Rep. 2021, 11, 1–9.DOI
  2. [2]Schupp, B.; Heines, P.; Savin, A.; Keller, H.-L. Crystal Structures and Pressure-Induced Redox Reaction of Cs₂PdI₄·I₂ to Cs₂PdI₆. Inorg. Chem. 2000, 39, 732–735.DOI
  3. [3]Maughan, A. E.; Ganose, A. M.; Bordelon, M. M.; Miller, E. M.; Scanlon, D. O.; Neilson, J. R. Defect tolerance to intolerance in the vacancy-ordered double perovskite semiconductors Cs₂SnI₆ and Cs₂TeI₆. J. Am. Chem. Soc. 2016, 138, 8453–8464.DOI
  4. [4]Shannon, R. D. Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides. Acta Crystallographica A 1976, 32, 751–767.DOI
  5. [5]Voigt, W. Lehrbuch der Kristallphysik, 1910. Leipzig etrived, Nov 2016, 29.
  6. [6]Madsen, G. K.; Singh, D. J. BoltzTraP. A code for calculating band-structure dependent quantities. Comput. Phys. Commun. 2006, 175, 67–71.DOI
  7. [7]Hellwarth, R. W.; Biaggio, I. Mobility of an electron in a multimode polar lattice. Phys. Rev. B 1999, 60, 299.DOI
  8. [8]Feynman, R. P. Slow Electrons in a Polar Crystal. Phys. Rev. 1955, 97, 660–665.DOI
  9. [9]Sendner, M.; Nayak, P. K.; Egger, D. A.; Beck, S.; Müller, C.; Epding, B.; Kowalsky, W.; Kronik, L.; Snaith, H. J.; Pucci, A. et al. Optical phonons in methylammonium lead halide perovskites and implications for charge transport. Mater. Horiz. 2016, 3, 613–620.DOI

Paper details

vlnc:W_xse4mndz
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents