WorksPhysics and Astronomy
Charge density wave induced nodal lines in LaTe
Abstract
LaTe is a noncentrosymmetric (NC) material with time reversal (TR) symmetry in which the charge density wave (CDW) is hosted by the Te bilayers. Here, we show that LaTe hosts a Kramers nodal line (KNL), a twofold degenerate nodal line that connects the TR invariant momenta in NC achiral systems, using angle resolved photoemission spectroscopy (ARPES), density functional theory (DFT), effective band structure (EBS) calculated by band unfolding, and symmetry arguments. DFT incorporating spin-orbit coupling (SOC) reveals that the KNL – protected by the TR and lattice symmetries – imposes gapless crossings between the bilayer-split CDW-induced shadow bands and the main bands. In excellent agreement with the EBS, ARPES data corroborate the presence of the KNL and show that the crossings traverse the Fermi level. Furthermore, spinless nodal lines - entirely gapped out by the SOC - are formed by the linear crossings of the shadow and main bands with a high Fermi velocity.
I Introduction
Recent years have witnessed a rapid development in the understanding of the physics of cooperative charge density wave (CDW) electronic state [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12]. In particular, interplay of the CDW electronic state with the non-trivial topological phases provides an interesting platform for discovery of novel quasiparticles such as, axionic insulator [3, 13], quantum spin-hall insulator [14], fractional Chern insulator states [15] and manipulation of topologically protected states [16, 17]. CDW can drive topological phase transitions by modifying the symmetry of the lattice, such as breaking the inversion symmetry [18]. Interesting topological phases are frequently found in noncentrosymmetric materials, such as, nodal chain fermions [19], Dirac and Weyl fermions [20, 21, 22], hourglass fermions protected by glide reflection [23], Kramers Weyl semimetal (KWS) [24] and recently predicted Kramers nodal line (KNL) metal [25]. KNLs differ from the Weyl nodal lines because they join two time reversal invariant momenta (TRIM) points and should appear in all achiral noncentrosymmetric time reversal symmetry (TRS) preserving systems [25]. For the subclass of nonsymmorphic symmetry, KNLs emerge from the points. Unlike the previously known nodal lines manifested by band inversion[26], the KNLs are robust under spin-orbit coupling (SOC) unless the protecting lattice symmetries such as TRS, mirror, or roto-inversion symmetries are broken. KNL fermions have been predicted to exhibit novel physical properties such as quantized optical conductivity [25]. However, in this emerging field, to the best of our knowledge, the experimental evidence of KNL is limited to the work by Shang et al. [27] who reported that transition metal ruthenium silicides belong to this class and exhibit unconventional superconductivity based on muon spin spectroscopy and density functional theory (DFT).
In recent years, multiple fascinating findings in [1, 4, 7, 28, 29, 30] – a member of the (R represents a rare earth element) family with highest CDW transition temperature of 670 K [31, 32] – have rekindled the scientific interest of the community in this noncentrosymmetric TRS preserving material. The detection of an axial Higgs boson mode in from Raman spectroscopy has been related to unconventional CDW excitation [1]. Photoinduced CDW state with topological defects in this material has been discovered from ultrafast electron diffraction and related studies [7, 28]. Transport studies have revealed that possesses an unusually high non-saturated longitudinal magnetoresistance [30], which is similar to that of nodal line material [33]. In addition, possesses very high carrier mobility [30], which, in conjunction with its high transition temperature, makes it a promising contender for next-generation electronics. Theoretical calculation of the electronic susceptibility as well as experiments have shown that dependent electron phonon coupling plays an important role in stabilizing the CDW state in [34, 35]. While there are no DFT investigations, angle resolved photoemission spectroscopy (ARPES) measurements on are also scarce in literature [7, 36]. Using time resolved ARPES, Zong et al. [7] examined light-induced melting of the CDW state of . A previous research by Brouet et al. [36] demonstrated that the CDW-induced shadow bands hybridize with the main bands existing in the non-CDW state creating a CDW gap along a particular direction of the Brillouin zone (BZ).
In light of the fact that is a noncentrosymmetric achiral material with TRS intact, topological phases brought on by inversion symmetry breaking in conjunction with other symmetries may be anticipated in the CDW state. Here, from an in-depth study of the band structure of in the CDW state by combining ARPES and initio DFT using a realistic experiment-based structure, we establish the existence of a KNL in a CDW material for the first time. It originates from the interaction of the shadow band and the main band, and is hosted by the TRS and the lattice symmetries. Furthermore, spinless nodal lines that are entirely gapped out by SOC are also identified.
Results
Modulated structure of LaTe3 in the CDW state
Figure 1a shows a 7-fold modulated supercell structure of . It is derived from the experimental structure obtained from single crystal x-ray diffraction (XRD) at 100 K [37] (see Methods). Its space group is (SG #40), which is same as that reported for the average structure [37]. is made up of two main structural units: La-Te1 corrugated slabs and Te2-Te3 bilayer. The latter, highlighted by blue double-sided arrows, are weakly coupled by van der Waals interaction. The Te bilayer of the 7-fold modulated structure hosts the CDW with , where is the reciprocal lattice vector along in the non-CDW state. This value is close to the experimental values determined from ARPES (subsection II B) and reported in previous literature [37, 38]. Moreover, the amplitude of the CDW modulation is nearly similar to that from XRD [37], see Supplementary Figs. S1a,b.

Figure 1. Structure, Brillouin zone and the Fermi surface of in the CDW state. (a) The 7-fold modulated primitive unit cell of comprising of 56 atoms with viewed perpendicular (left) and parallel (right) to the direction. The lattice constants are Å, Å with , and . The cleavage plane (light blue) occurs in between the two weakly interacting Te layers. (b) High resolution scanning tunneling microscopy topography image obtained with bias voltage of 0.2 V and a tunneling current of 0.4 nA. (c) Low energy electron diffraction pattern measured with 57 eV primary beam energy in inverted gray scale. (d) The CDW Brillouin zone (BZ) (black) is shown within that of the non-CDW state (light blue). The high symmetry points [39] are indicated in these respective colors. , and points coincide for both. (dashed line) is in the 2nd BZ along . (e) The Fermi surface (FS) in the CDW state measured by ARPES, where the length of the white dashed arrows (#1, #2) that join the shadow branches with the main branches of the FS represents .
The CDW modulation has been directly observed in the crystal studied here from a high resolution scanning tunneling microscopy (STM) topography image. In Figure 1b, the modulated Te net formed by connecting the Te atoms (orange circles) is shown by white lines. Low energy electron diffraction (LEED) pattern also shows CDW related satellite spots (encircled) besides the spots (Figure 1c). Satellite spots are also observed in the Fourier transform of the STM image, see Supplementary Note 1 and Fig. S2.
The experiment based 7 fold modulated structure discussed above has been used for the DFT calculations. The corresponding BZ is shown in Figure 1d inscribed within the non-CDW BZ. Since the BZ is related to the ordering of the lattice constants of the conventional cell, its comparison with the primitive unit cell of the 7-fold structure is shown in Supplementary Figs. S3a,b. In our notation, the horizontal plane in the BZ is represented by - and is oriented along . The CDW BZ, containing features such as the primitive reciprocal lattice vectors and all the pertinent high symmetry points and directions as well as their coordinates, is depicted in Supplementary Fig. S3c.
Crossing of the bilayer-split shadow and main bands from ARPES
An ARPES intensity plot in a generic direction parallel to at Å i.e., near the X point (the length of being Å) is shown in Figure 2a (see Methods for the

Figure 2. Crossings between the bilayer-split shadow and the main bands. ARPES intensity plots measured at 100 K for (a) 0.68, (b) 0.63, (c) 0.59, and (d) 0.56 Å. The crossing regions are highlighted by green dashed ovals. (e) A zoomed view of the near region of panel a around Å, the white dashed lines are obtained by curve fitting (see Methods). (f) Curvature plot of a part of panel c shown in an expanded scale: the crossings indicated by , , and are shown by blue, green, yellow and red circles, respectively. The and crossings occur at the point. The dashed red (black) line representing the main (shadow) band is obtained by curve fitting as in panel e. (g) Cut at of an -- ARPES intensity plot shows the dispersion of the crossing and the and bands within the yellow rectangle. A shadow band is observed in the cut . (h-k) The effective band structure (EBS) along obtained by band unfolding at similar values as in panels a-d, respectively. The band crossing regions are highlighted by green dashed ovals.
experimental details). The direction of the measurement is shown by a red line denoted by “a” in Figure 2g. It shows two main bands (inner and outer) centered around that cross at and Å, respectively. The outer main band disperses down to binding energy () of about 1.25 eV, while the inner band has a nearly flat bottom at 0.8 eV. It is interesting to note that a relatively weaker band centered around Å is a replica of the main band shifted by Å), as shown by two horizontal white dashed arrows. This replica band crosses at and Å and disperses down to eV. No shift in its position along compared to the main band is observed, which indicates that it is related to the initial state CDW superlattice [40]. It has been referred to in literature as the shadow band [36, 40, 41]. The signature of the shadow band is also evident in the Fermi surface (FS) shown in Figure 1e, where shadow FS branches appear at a separation of from the main branches, as shown by white dashed arrows in the metallic region around the point parallel to the direction. In the Supplementary Note 2, a discussion about the FS and obtained from the average separation of the shadow and main branches are provided. determined in this way is close to and is in excellent agreement with the values obtained from STM and LEED, see Supplementary Note 1.
In Figure 2a, The shadow and the main bands resemble an inverted “V” and meet each other close to at Å (highlighted by a green dashed oval). This region is shown in an expanded scale in Figure 2e, where the white dashed lines suggest a possible crossing of nearly linear bands at . The Fermi velocities of these bands, determined using the expression , turn out to be and m/s for the shadow and main bands, respectively. These values are comparable to graphene ( m/s [42]), indicating large mobility of LaTe in agreement with recent report from Hall conductivity measurements [30].
To further investigate these bands and their possible crossing, ARPES was performed over a range of out of which three representative plots (along the red lines parallel to “a” up to “d” in Figure 2g) are shown in Figure 2b-Figure 2d. Interestingly, as decreases, both the main and the shadow bands spread out in and the crossings – highlighted by green dashed ovals – shift below to larger . However, note that their position remains unchanged around . In Figure 2b-Figure 2d, splittings in both the shadow and the mains bands are observed, which are related to the coupling between the two adjacent weakly coupled Te layers. This
is the bilayer splitting that has been reported in other RTe members [36, 43, 44], bilayer graphene [45], and cuprate superconductors [46]. Here, we find that the splitting increases with , e.g., it varies from 0.016 to 0.03 Å as increases from 0.1 to 0.5 eV (Figure 2c). Evidence of varying bilayer splitting is also observed in the FS (see Supplementary Note 2).
Both the bilayer-split shadow bands - denoted by () for smaller (larger) , see Figure 2f - are shifted by from the corresponding main bands (denoted by and ). This is shown by the white dashed horizontal arrows in Figure 2a,Figure 2b. This leads to formation of four crossings between the main and the shadow bands, as shown in Figure 2f. These are also visible in a constant energy - isosurface through the band crossing e.g. at eV and a stack of momentum distribution curves (MDCs), see Supplementary Figs. S8a,b.
The crossings are denoted by left (, blue circle, crossing of and i.e., ), right (, orange circle, ), top (, red circle, ), and bottom (, green circle, ) (Figure 2f). While Figure 2a-Figure 2d show the band dispersion at discrete values, we show a continuous dispersion of the crossings, for example the in cut of Figure 2g. Here, the at Å shows the loci of the crossing within the yellow rectangle.
ARPES with different photon energies shows negligible dependence of the crossings. For example at Å, Supplementary Figs. S9a-d show that their position (highlighted by green dashed ovals) remains almost unchanged with . This is summarized in Fig. S9e through a - map at eV, where the two crossings at Å (marked by yellow arrows) show almost no change with , indicating the quasi-2D nature of LaTe.
Effective band structure from DFT compared to ARPES
Multiple crossings indicated by ARPES is a surprising result since hybridization gap is generally expected at the band touching points between the Bloch states connected by [44, 47]. To understand this, we have performed DFT calculations using the modulated structure discussed in subsection II A.
The bands calculated at different as in the experiment are shown in an extended zone scheme spread over the non-CDW BZ in Supplementary fig:S10. Many bands are observed in the CDW state due to band folding. The complexity of these bands hides the influence of the CDW on the electronic bands and impedes their interpretation and direct comparison with ARPES. So, an effective band structure (EBS) has been calculated by unfolding the bands in the non-CDW BZ [48, 49, 50]. In Figure 2h-Figure 2k, EBS shows the distribution of states as a function of their energy and momenta with appropriate spectral weight, where broadening similar to the experiment has been applied. Variations in the spectral weight is evident resulting in dissimilar EBS in the different CDW BZs. This complexity in a CDW system is discussed further in subsection II F.
The importance of the EBS calculation is that despite the CDW effect being small with the modulation amplitude only 4.5% of the average Te2-Te3 distances, the EBS reveals the shadow bands that are shifted from the main bands by (blue dashed arrows) in excellent agreement with ARPES (compare Figure 2h-Figure 2k with Figure 2a-Figure 2d). In contrast, the bands in the non-CDW state, where obviously the CDW amplitude is zero, shows only the main bands (Supplementary Fig. S11a). An analysis of the orbital character establishes that the shadow bands (as well as the main bands) are of predominantly in-plane Te - character, see the Supplementary Figs. S12a-f. The out-of-plane character becomes slightly significant only for eV, and the contributions from the La-Te1 block is negligible. However, transfer of electrons from La to the Te net determines the band filling in the Te2-Te3 layer and this has been calculated using the Bader charge analysis (see Supplementary Note 3 including Refs. 51–53).
From Figure 2h, we find that the outer branch of the shadow band disperses towards and crosses the main band around Å (highlighted by a dashed green oval). A bunch of bands that disperse weakly between 1.15 to 1.6 eV are observed in both theory and experiment at similar . A bilayer splitting of 0.17-0.2 eV (red double arrow in Figure 2h) is observed in the EBS with and crossings close to , while () appears above (below) . However, these are not visible separately in Figure 2a, indicating that possibly at this the experimental bilayer splitting is smaller compared to the DFT value. The inner branch of the shadow band that disperses to about 0.6 eV is more prominent in the EBS, but also has its counterpart in the curvature plot of ARPES (see Supplementary Fig. S11b). In Figure 2i-Figure 2k, for progressively smaller values, EBS portray all the four crossings at similar - observed in ARPES (compare Figure 2i-Figure 2k with Figure 2b-Figure 2d). The agreement is also good at larger : the main bands around 0.8 eV become flatter and move to lower .
Important to note is that from ARPES the crossings appear to be gapless (Figure 2a-Figure 2f) within the experimental and lifetime broadening. Although this is supported by the EBS (Figure 2h-Figure 2k), it should be noted that the calculations have been performed with a step size () of , and with broadening comparable to ARPES, which might conceal the potential presence of minigaps. In the subsequent subsections II D and II E, we show the DFT bands calculated with smaller to probe these crossings further.
Spinless nodal lines formed by the and crossings
The DFT bands in the crossing region with small () in absence of SOC indeed indicate that the and crossings are gapless (Figure 3a). This is reconfirmed in Figure 3b,Figure 3c by the bands calculated with even smaller (). It is interesting to note that these crossings occur at generic points of the BZ in the - plane and the bands involved are linear (Figure 3a-Figure 3c). ARPES intensity plots in Figure 2c,Figure 2f at this also demonstrate the linearity of the bands around and in excellent agreement with DFT. The velocities calculated from their slopes are similar to that obtained at from Figure 2e. Although these bands originate from the in-plane orbitals with small difference in contributions from the and orbitals as shown in Supplementary Figs. S12a-f, and bands belong to irreducible band representation (irrep), while and belong to irrep. Thus both and crossings are formed by bands belonging to different irreps (Figure 3a-Figure 3c).

Figure 3. Band crossings and the Kramers nodal line. (a) band dispersion from DFT at Å without (w/o) SOC. The irreducible representations (irreps) are shown. The vertical dashed line represents the point on i.e., the line. Zoomed colored rectangles of panel a show the bands around (b) (), (c) (), (d) (), and (e) (). Comparison of the ARPES intensity plot with DFT for the following crossings: (f) at Å and (g) at Å. The positions of these crossings obtained from DFT (orange and blue filled circles for and , respectively) are superimposed. (h) A schematic representation of the gapless and crossings in the -- space (red dashed lines) and their projection on the - plane showing the spinless nodal lines (thick red lines on both sides of the line). (i-m) Same as panels a-e except that the calculations are performed with SOC. (n) ARPES intensity plot at Å (dashed curves here and in panels f and g serve as guide to the eye) compared with the positions of the crossings enforced by the KNL obtained from DFT for (red, light red circles) and (black, gray circles). (o) A schematic representation of the four crossings (green dashed lines) related to the upper and lower branches of and . The Kramers nodal line appears along the line and is denoted by a green thick line on the - plane. The gapped out spinless nodal lines at and are also shown. The energy dispersion along is not shown here as well as in panel h.
The crossings disperse with and at larger compared to , and crossings traverse the (Supplementary Fig. S13a-c). In fact, calculations for a series of values establish that the gapless linear crossings occur over an extended range of the - space (Supplementary Fig. S14). The loci of each crossing form a continuous curve in the momentum space that has been referred to as a nodal line. A direct comparison of the (, ) cuts from ARPES (Figure 3f,Figure 3g for and , respectively) show that the positions of both the nodal lines are in excellent agreement with DFT. Both disperse between (, ) = ( eV, ) to ( eV, ) with at and for and , respectively. Thus, the crossings appear within an energy window of eV to the . Their projections in the - plane form a pair of approximately parallel nodal lines that are in length and appear at a separation of in a general direction on this plane (red solid lines in Figure 3h). These appear parallel to but on either sides of that occurs at . These nodal lines are formed by two fold crossings of
nondegenerate bands in the absence of spin and so are referred to spinless nodal lines.
With inclusion of SOC, it is intriguing to find that both the and crossings (and hence the nodal lines) are entirely gapped out by minigap of 14-17 meV into upper and lower branches, as shown in Figure 3i-Figure 3k and Supplementary Figs. S13g,h. A schematic is shown in Figure 3o. The gap is formed by hybridization of bands belonging to same one dimensional double group irrep involving both and .
Note that noncentrosymmetry should lift the SU(2) spin degeneracy. This is visible through the spin splitting of both the upper and lower branches in Figure 3j,Figure 3k. These spin-split bands belong to different irreps and and do not cross each other. The splittings for both and are -dependent, it is maximum at the extrema (3 meV for lower and 1 meV for the upper branch in Figure 3j,Figure 3k) and decreases away from it.
Evidence of Kramers nodal line from the and crossings
In the case of and , the shadow and main bands belong to the same irrep, leading to hybridization-related minigaps without SOC and the creation of upper and lower branches (Figure 3a,Figure 3d,Figure 3e). The inclusion of SOC provides a fascinating outcome: the spin-split bands in both the upper and lower branches of and exhibit gapless crossings (Figure 3l,Figure 3m), which contrasts the bands at and (Figure 3j,Figure 3k). Each branch of and crosses at the same Å (dashed lines in Figure 3i,Figure 3l,Figure 3m) resulting in four crossings. This value of is special, since it falls on the line of the CDW BZ (i.e., or the line) (Figure 1d). At Å, the four crossings appear at different : 0.256 (0.267) eV for the upper (lower) branch of , and 0.448 (0.469) eV for upper (lower) branches of .
These gapless crossings are observed over a range of , as in the case of and (subsection III D). For example, at Å, the crossings disperse to smaller and in this case both the branches of () are above (below) the (Supplementary Fig. S13f-h). Significantly, the crossings always appear at same i.e., along the line, suggesting that the crossings may be enforced by the lattice symmetries along this direction.
The band irreps with SOC shown in Figure 3l,Figure 3m are as follows: the crossing belongs to a double valued irrep that is two dimensional (), while away from it, the spin-split bands have one dimensional ( or ) representation. Significantly, the line that emerges from the point has the little group that is isomorphic to point group and has symmetries such as the two fold rotation about the -axis denoted by , glide reflection perpendicular to the axis in the - plane followed by a translation of given by and an off-centered mirror perpendicular to the axis . is a TRIM point, where according to the Kramers theorem, each band is at least doubly degenerate. The little group of is related to that of by the compatibility relations. We find that and are represented by two dimensional double-valued irreps: and , respectively. These representations are similar, as shown in Supplementary Table S2 [54]. The line passes through the point with co-ordinates and meets the TRIM point in the next BZ (see Supplementary Fig. S15). also belongs to double-valued two dimensional irrep that is same as and (Supplementary Table S2). The condition that at the TRIM points the representations should be time reversal invariant is satisfied since both and are pseudo-real [54]. Thus, -- is able to support two fold degeneracy of the bands along i.e., the line. This is a Kramers nodal line (KNL) that occurs along the line in the mirror-invariant -plane in presence of TRS, and the additional rotational symmetry constrains the KNL along a high symmetry direction [25]. Xie et al. [25] have proved the existence of KNL along the rotational axis (), which in our case is along that lies in the - mirror plane (). In Figure 3o, the projection of the loci of the crossings of the four pairs of bands in the -- space on the - plane shows the KNL (thick green line) that enforces the crossings.
The bands in a plane that cuts the KNL perpendicularly – as is the case in Figure 3i – have been described in the literature as two-dimensional massless Dirac Hamiltonian with the Berry curvature concentrated at the crossing [25]. These authors demonstrated that the Berry phase around a KNL is quantized as mod . In case of quadratic and cubic dispersion of these bands, the crossing has been dubbed as a higher-order Dirac point [25]. In the present case, both the upper and lower branches of and exhibit quadratic dispersion very close to the crossings, as is evident in Figure 3l,Figure 3m. Consequently, the gapless crossings in that are associated with the KNL are higher-order Dirac points.
ARPES and DFT along the KNL and other directions
In Figure 4a, the bands calculated along the KNL (i.e., ) show two pairs of degenerate bands related to the and crossings, highlighted by green shading in the insets , . The ARPES intensity plot in Figure 3n represents these bands that are also identified by the degenerate crossings of bands in the perpendicular direction (Figure 3l,Figure 3m) enforced by the KNL. The existence of the KNL between 0.5 to 0.7 Å along is affirmed by ARPES through an excellent agreement of the positions of the crossings obtained from DFT (filled circles) that are overlaid on the experimental data in Figure 3n. The agreement is also evident in the Supplementary Fig. S16, where Figure 3i is superposed on Figure 2f. However, the energy separations between the upper and lower branches of both and are too small to be resolved by ARPES. Similarly, the quadratic nature visible in a tiny range shown in Figure 3l,Figure 3m is not distinguished, see the regions enclosed by the red and black rectangles in Supplementary Fig. S16. Nonetheless, ARPES is consistent with DFT, and both show that the crossings disperse from eV at Å and traverse the at 0.65-0.7 Å.

Figure 4. DFT and ARPES along and perpendicular to the KNL. (a) The band structure of along in the CDW state. On the left, zoomed regions from the blue rectangles show the two fold degeneracy (dashed-green and black) of the bands along the KNL. On the right, zoomed regions from the red rectangles show the spin-splitting along the direction in contrast to . (b) ARPES intensity plot measured using photon energy of 24.4 eV and (c) the EBS obtained from DFT towards and .
We find that every band along is degenerate due to the double degeneracy enforced by the KNL (see for example the insets - of Figure 4a) and belong to two dimensional irrep. Besides the and related bands discussed above, there are other bands that cross in Figure 4a. These bands – numbered as , and and highlighted by orange shading – have not been observed in the ARPES along ( Å) due to their low spectral weight at this . However, these three bands are clearly visible in the ARPES intensity plot along ( Å) in Figure 4b and disperse across the in splendid agreement with the EBS along the same direction in Figure 4c. At larger other bands (numbered as -) in the EBS along are in very good agreement with ARPES (Figure 4b). On the other hand, the bands around the and crossings both along and perpendicular to the KNL have negligible spectral weight around and so are observed neither in EBS nor ARPES in Figure 4b,Figure 4c. Similarly, in Figure 3a,Figure 3i parabolic bands around eV and - eV are not visible in the EBS or ARPES. The is caused by the variation of the spectral weight mentioned in subsection II C. On the other hand, the band structure shows the crossings formed by band folding in every BZ, see Supplementary Fig. S10, where the crossing region is highlighted by red ovals. This shows the importance of performing ARPES over multiple CDW BZs in the direction of to decipher the influence of the CDW on the electronic band structure.
Perpendicular to the KNL along (), the bands are represented by one dimensional irreps (Supplementary Fig. S15 and Supplementary Table S3). Since the little group along this direction has lesser symmetry than , degeneracy is not enforced. This is shown by the spin-splitting along in the zoomed insets of Figure 4a. This is also true for the bands calculated along various other high symmetry directions (Supplementary Fig. S17), where the insets show degeneracy along and splitting along other directions. In the direction no bands are found to cross the , and this is corroborated by ARPES as well as EBS. Here, a hybridization related gap is observed with bands being the highest occupied
ones (red double arrow in Figure 4b,Figure 4c). This gap has been referred to in previous literature as the CDW gap in LaTe [36] and other RTe systems [40, 43, 44, 55, 56]. A discussion about the variation of the CDW gap of LaTe with and is provided in the Supplementary Note 4.
Discussions
In this work, we show the existence of the recently predicted [25] KNL in the CDW state of LaTe, along the direction with point group (Figure 3o) based on the results of ARPES, ab-initio DFT, EBS obtained by band unfolding and symmetry arguments. The origin of the KNL is associated with the time reversal symmetry (LaTe being non-magnetic in contrast to the other RTe materials) as well as the symmetries of the noncentrosymmetric and nonsymmorphic lattice ( rotation along and mirror in the - plane).
The crossings of the CDW-induced shadow and the main bands enforced by the KNL occur from eV, and disperse in to traverse the as increases (Figure 3n). The dispersion in is related to the dispersion of the main band (the crossing of the main band with moves to larger as decreases, see Figure 2a-Figure 2d, Figure 2h-Figure 2k) coupled with the constraint that the shadow band is always separated from it by . Other spin degenerate bands also cross the along the KNL. We characterize LaTe as a KNL metal in the CDW state based on multiple bands crossing the both along and perpendicular to the KNL.
We have furthermore identified spinless nodal lines in a general direction on the - plane in the limit of negligible SOC (Figure 3h). These nondegenerate bands with distinct irreps involved in the crossings are linear and traverse the with high Fermi velocity. The nodal lines are entirely gapped with SOC. These characteristics resemble those of noncentrosymmetric topological nodal line semi-metals such as pinictides e.g., CaAgAs [57], in which the nodal line is entirely gapped by SOC resulting in a topological insulator [57, 58]. Whether the SOC-induced gap in LaTe has a topological character is an open question that would require further investigation.
The appearance of these two distinct types of nodal lines can be attributed to the bilayer splitting, that splits both the shadow and the main bands to bands belonging to different irreps. Thus, the foundation of our investigation is the unambiguous observation of the bilayer-split shadow bands by ARPES with which the theory is in impressive agreement.
This occurred due to the 7 fold modulated structure with , employing which DFT was done for the first time with and the amplitude of the CDW modulation close to the experimental value. However, the experimental values differ depending on the method: for example, electron diffraction showed [38], whereas XRD reported [37] in the temperature range of 90-100 K. Here, from ARPES we find to be . Considering these values, it is possible that there might be a minor deviation of experimental from ; hence, is often considered as “incommensurate” [37, 38]. In order to answer the question whether the KNL would exist if deviates, we find that it is possible to construct a 29-fold (1×1×29) structure with from the experimental XRD structure [59]. Note that it has the same space group (SG #40) as the 7-fold structure. Its equals the experimental XRD value, which is most precise among the distinct methods, rounded to the third decimal place. Moreover, the required displacement of the 232 atoms in the primitive unit cell from the atomic positions from XRD [37] is zero (0.0000) for virtually all the atoms, with the exception of only a couple of Te atoms where it is 0.0001 Å. Since the symmetries of #40 as well as the TRS are retained in the 29-fold structure, it is expected that the KNL will remain intact.
In conclusion, the discovery of CDW-induced KNL in LaTe – a non-centrosymmetric, quasi-2D, TRS-preserving material – is the cornerstone of our work, which we feel will stimulate further investigation into the fascinating realm of CDW materials.
Methods
Experimental: Single crystals of LaTe with residual resistivity ratio (RRR, ) of 270 were grown by tellurium flux technique, as discussed in our previous work [30].
The ARPES measurements presented here were performed at the SGM3 beamline at the ASTRID2 synchrotron facility [60]. ARPES data at SGM3 beamline were collected with an energy resolution of 18 meV at eV. The angular resolution was 0.2° (0.008 Å). The measurements were performed at 100 K with different photon energies ranging from 13 eV to 140 eV. All the measurements were done on freshly cleaved surfaces at a chamber base pressure better than mbar. The ARPES intensity plots measured as a function of photon energy () have been converted to assuming the free electron final states [61]. The raw data ( vs ) have been converted to vs by utilizing the expression , where is the kinetic energy of the photoelectrons, is the emission angle and the inner potential has been assumed to be 7.5 eV based on the best matching with the ARPES data. The curvature plots have been obtained as in our earlier work [62, 63] with respect to both and axes following the method proposed by Zhang et al.[64]. This method improves the visibility of the weaker bands in the ARPES intensity plots and is better than the second derivative approach. The data analysis has been performed using IGOR pro (version 9). The dashed curves in Figure 2e,Figure 2f are obtained by a curve fitting the maxima of the MDCs. The maxima are identified by fitting the MDCs with Lorentzian functions. The least-square error method has been used for the curve fitting.
The STM measurements were carried out at a base pressure of mbar using a variable temperature STM from Omicron Nanotechnology GmbH, while LEED and preliminary ARPES measurements were carried out in a workstation from Prevac sp. z o.o. STM was performed in the constant current mode using a tungsten tip that was cleaned by sputtering and voltage pulse method. The tip was biased and sample was kept at the ground potential. LEED is performed using a four grid rear view optics from OCI Vacuum Microengineering. Both STM and LEED were performed in the CDW state at room temperature.
Density functional theory: The DFT calculations have been performed for the 7-fold modulated structure with space group ( #40). This structure has been derived from the experimental atomic positions at 100 K reported in Ref. 37 using the PSEUDO program with average displacement of the atoms being Å [59]. VESTA software has been used for Crystal structure visualization [65].
We have employed the DFT-based Vienna Ab-initio Simulation Package (VASP) [66, 67] within the framework of the projector augmented wave method (PAW) [66, 67] to investigate the electronic structure of LaTe. The exchange-correlation functional is treated under the generalized gradient approximation (GGA) given by Perdew, Burke, and Ernzerhof [68]. We have considered 11 valence electrons of the La atom () and 6 valence electrons of Te atom () in the PAW pseudopotential. The energy cut-off is set to 500 eV for the expansion of the planewaves. The convergence criterion for energy in the self-consistent-field cycle and total force tolerance on each atom are taken to be eV and 0.02 eV/Å, respectively. The SOC is employed by a second-variation method as implemented in the VASP code [67]. To calculate the EBS, we have unfolded the band structure of the CDW state into the primitive BZ of the non-CDW state, using the PyProcar python code [50]. All the DFT bands (and consequently the EBS) are rigidly shifted to larger by 0.1 eV with respect to the for comparison with the ARPES data.
Furthermore, to reconfirm the band crossings and to identify their irreps, DFT calculations have been performed using the all electron WIEN2k programme package [69] and Quantum Espresso software package [70]. Supplementary Fig. S18 shows that the bands are in agreement between the different methods. WIEN2k was performed with energy cut-off of 16 Ry, where the value is taken to be 9.5. Further, we have used 10 for the maximum value of angular momentum for the (l,m) expansion of wave function or density. Convergence criteria for energy and charge have been taken to be Ry and 0.001 , respectively. Quantum Espresso calculations have been carried out using fully relativistic PAW pseudopotentials for La and Te atoms. A planewave cutoff of 80 Ry and a k-grid were taken along with the energy accuracy of Ry.
Acknowledgment
S.S., P.S. and S.R.B. gratefully acknowledge the financial support from Department of Science and Technology, Government of India within the framework of the DST-Synchrotron-Neutron Project to perform experiments at ASTRID2 synchrotron facility. A part of this work was supported by VILLUM FONDEN via the Centre of Excellence for Dirac Materials (Grant No. 11744). The Computer division of Raja Ramanna Centre for Advanced Technology is thanked for installing the DFT codes and providing support throughout.
Author contributions
S.S., P.S., D.C., and S.R.B. conducted the ARPES measurements with assistance and support from M.B. and P.H. LEED was carried out by S.S. and P.S., while STM was performed by V.K.S. J.B. and R.D. did the DFT calculations under the supervision of A.C. The explanation of the results was provided by S.S., T.D., A.C., and S.R.B. The single crystals of LaTe were grown by A.P., S.R. and P.M, the latter introduced us to this system. S.S. analyzed the experimental data with initial help from D.C., performed the post-analysis of the DFT results with some inputs from J.B., and prepared the figures. The project was planned and led by S.R.B. who wrote the paper with significant contributions from S.S., P.H., and A.C.
Competing interests
The authors declare no competing interests.
References
- [1]Wang, Y. et al., Axial higgs mode detected by quantum pathway interference in RTe₃, Nature 606, 896 (2022).DOI
- [2]Jiang, Y.-X. et al., Unconventional chiral charge order in kagome superconductor KV₃Sb₅, Nature Materials 20, 1353 (2021).DOI
- [3]Shi, W. et al., A charge-density-wave topological semimetal, Nature Physics 17, 381 (2021).
- [4]Rettig, L. et al., Persistent order due to transiently enhanced nesting in an electronically excited charge density wave, Nature Communications 7, 10459 (2016).DOI
- [5]Luo, H. et al., Electronic nature of charge density wave and electron-phonon coupling in kagome superconductor KV₃Sb₅, Nature Communications 13, 273 (2022).DOI
- [6]Yu, F. H. et al., Unusual competition of superconductivity and charge-density-wave state in a compressed topological kagome metal, Nature Communications 12, 3645 (2021).DOI
- [7]Zong, A. et al., Evidence for topological defects in a photoinduced phase transition, Nature Physics 15, 27 (2018).
- [8]Li, H. et al., Observation of unconventional charge density wave without acoustic phonon anomaly in kagome superconductors AV₃Sb₅ (A = Rb, Cs), Phys. Rev. X 11, 031050 (2021).DOI
- [9]Song, Z. et al., Observation of an incommensurate charge density wave in monolayer TiSe₂/CuSe/Cu(111) heterostructure, Phys. Rev. Lett. 128, 026401 (2022).DOI
- [10]Lv, B. Q. et al., Unconventional hysteretic transition in a charge density wave, Phys. Rev. Lett. 128, 036401 (2022).
- [11]Pan, H., Xie, M., Wu, F. and Das Sarma, S., Topological phases in ab-stacked MoTe₂/WSe₂: Z₂ topological insulators, chern insulators, and topological charge density waves, Phys. Rev. Lett. 129, 056804 (2022).DOI
- [12]D’Souza, S. W. et al., Coexistence of charge-density wave and ferromagnetism in Ni₂MnGa, Phys. Rev. B 85, 085123 (2012).DOI
- [13]Gooth, J. et al., Axionic charge-density wave in the weyl semimetal (TaSe₄)₂I, Nature 575, 315 (2019).DOI
- [14]Qian, X., Liu, J., Fu, L. and Li, J., Quantum spin hall effect in two-dimensional transition metal dichalcogenides, Science 346, 1344 (2014).
- [15]Polshyn, H. et al., Topological charge density waves at half-integer filling of a moiré superlattice, Nature Physics 18, 42 (2021).DOI
- [16]Mitsuishi, N. et al., Switching of band inversion and topological surface states by charge density wave, Nature Communications 11, 2466 (2020).DOI
- [17]Lei, S. et al., Band engineering of dirac semimetals using charge density waves, Advanced Materials 33, 2101591 (2021).DOI
- [18]Hsu, M.-C. et al., Topological theory of inversion-breaking charge-density-wave monolayer 1T-TiSe₂, New Journal of Physics 23, 093025 (2021).DOI
- [19]Bzdušek, T., Wu, Q., Rüegg, A., Sigrist, M. and Soluyanov, A. A., Nodal-chain metals, Nature 538, 75 (2016).
- [20]Xia, Y., Cai, X. and Li, G., Multitype dirac fermions protected by orthogonal glide symmetries in a noncentrosymmetric system, Phys. Rev. B 102, 041201 (2020).DOI
- [21]Gao, H. et al., Dirac-weyl semimetal: Coexistence of dirac and weyl fermions in polar hexagonal ABC crystals, Phys. Rev. Lett. 121, 106404 (2018).DOI
- [22]Oh, Y.-T., Min, H.-G. and Kim, Y., Dual topological nodal line and nonsymmorphic dirac semimetal in three dimensions, Phys. Rev. B 99, 201110 (2019).DOI
- [23]Leonhardt, A. et al., Symmetry-enforced topological band crossings in orthorhombic crystals: classification and materials discovery, Phys. Rev. Materials 5, 124202 (2021).DOI
- [24]Chang, G. et al., Topological quantum properties of chiral crystals, Nature Materials 17, 978 (2018).
- [25]Xie, Y.-M. et al., Kramers nodal line metals, Nature Communications 12, 3064 (2021).
- [26]Yu, R., Weng, H., Fang, Z., Dai, X. and Hu, X., Topological node-line semimetal and dirac semimetal state in antiperovskite Cu₃PdN, Phys. Rev. Lett. 115, 036807 (2015).
- [27]Shang, T. et al., Unconventional superconductivity in topological Kramers nodal-line semimetals, Science Advances 8, eabq6589 (2022).DOI
- [28]Kogar, A. et al., Light-induced charge density wave in LaTe₃, Nature Physics 16, 159 (2019).DOI
- [29]Zong, A. et al., Role of equilibrium fluctuations in light-induced order, Phys. Rev. Lett. 127, 227401 (2021).DOI
- [30]Pariari, A. et al., Interplay between charge density wave order and magnetic field in the nonmagnetic rare-earth tritelluride LaTe₃, Phys. Rev. B 104, 155147 (2021).DOI
- [31]Hu, B. F., Cheng, B., Yuan, R. H., Dong, T. and Wang, N. L., Coexistence and competition of multiple charge-density-wave orders in rare-earth tritellurides, Phys. Rev. B 90, 085105 (2014).DOI
- [32]Yumigeta, K. et al., Advances in rare-earth tritelluride quantum materials: Structure, properties, and synthesis, Advanced Science 8, 2004762 (2021).DOI
- [33]Singha, R., Pariari, A. K., Satpati, B. and Mandal, P., Large nonsaturating magnetoresistance and signature of nondegenerate dirac nodes in ZrSiS, Proceedings of the National Academy of Sciences 114, 2468 (2017).DOI
- [34]Johannes, M. D. and Mazin, I. I., Fermi surface nesting and the origin of charge density waves in metals, Phys. Rev. B 77, 165135 (2008).
- [35]Eiter, H.-M. et al., Alternative route to charge density wave formation in multiband systems, Proceedings of the National Academy of Sciences 110, 64 (2012).DOI
- [36]Brouet, V. et al., Angle-resolved photoemission study of the evolution of band structure and charge density wave properties in RTe₃ (R=Y, La, Ce, Sm, Gd, Tb, and Dy), Phys. Rev. B 77, 235104 (2008).DOI
- [37]Malliakas, C. D. and Kanatzidis, M. G., Divergence in the behavior of the charge density wave in RETe₃ (RE = rare-earth element) with temperature and RE element, Journal of the American Chemical Society 128, 12612 (2006).
- [38]DiMasi, E., Aronson, M. C., Mansfield, J. F., Foran, B. and Lee, S., Chemical pressure and charge-density waves in rare-earth tellurides, Phys. Rev. B 52, 14516 (1995).
- [39]Setyawan, W. and Curtarolo, S., High-throughput electronic band structure calculations: Challenges and tools, Computational Materials Science 49, 299 (2010).DOI
- [40]Komoda, H. et al., High-resolution angle-resolved photoemission study of incommensurate charge-density-wave compound CeTe₃, Phys. Rev. B 70, 195101 (2004).DOI
- [41]Mans, A. et al., Experimental proof of a structural origin for the shadow fermi surface of Bi2Sr2CaCu2O8, Physical Review Letters 96, 10.1103/physrevlett.96.107007 (2006).
- [42]Novoselov, K. S. et al., Two-dimensional gas of massless dirac fermions in graphene, Nature 438, 197 (2005).
- [43]Gweon, G.-H. et al., Direct observation of complete fermi surface, imperfect nesting, and gap anisotropy in the high-temperature incommensurate charge-density-wave compound SmTe₃, Phys. Rev. Lett. 81, 886 (1998).DOI
- [44]Brouet, V. et al., Fermi surface reconstruction in the cdw state of CeTe₃ observed by photoemission, Phys. Rev. Lett. 93, 126405 (2004).
- [45]Ohta, T., Bostwick, A., Seyller, T., Horn, K. and Rotenberg, E., Controlling the electronic structure of bilayer graphene, Science 313, 951 (2006).
- [46]Feng, D. L. et al., Bilayer splitting in the electronic structure of heavily overdoped Bi₂Sr₂CaCu₂O₈+δ, Phys. Rev. Lett. 86, 5550 (2001).
- [47]Yang, B.-J. and Kee, H.-Y., Searching for topological density-wave insulators in multiorbital square-lattice systems, Phys. Rev. B 82, 195126 (2010).DOI
- [48]Ku, W., Berlijn, T. and Lee, C.-C., Unfolding first-principles band structures, Phys. Rev. Lett. 104, 216401 (2010).
- [49]Popescu, V. and Zunger, A., Effective band structure of random alloys, Phys. Rev. Lett. 104, 236403 (2010).
- [50]Herath, U. et al., PyProcar: A python library for electronic structure pre/post-processing, Computer Physics Communications 251, 107080 (2020).DOI
- [54]Elcoro, L. et al., Double crystallographic groups and their representations on the bilbao crystallographic server, Journal of Applied Crystallography 50, 1457 (2017).
- [55]Lee, E. et al., The 7 × 1 fermi surface reconstruction in a two-dimensional f -electron charge density wave system: PrTe₃, Scientific Reports 6, 30318 (2016).
- [56]Chikina, A. et al., Charge density wave-generated fermi surfaces in NdTe₃, arXiv preprint , arXiv:2209.04226v1 (2022).DOI
- [57]Yamakage, A., Yamakawa, Y., Tanaka, Y. and Okamoto, Y., Line-node dirac semimetal and topological insulating phase in noncentrosymmetric pnictides CaAgX(X= P, As), Journal of the Physical Society of Japan 85, 013708 (2016).DOI
- [58]Lv, B. Q., Qian, T. and Ding, H., Experimental perspective on three-dimensional topological semimetals, Rev. Mod. Phys. 93, 025002 (2021).DOI
- [59]Capillas, C. et al., A new computer tool at the bilbao crystallographic server to detect and characterize pseudosymmetry, Zeitschrift für Kristallographie 226, 186 (2011).DOI
- [60]Hoffmann, S., Søndergaard, C., Schultz, C., Li, Z. and Hofmann, P., An undulator-based spherical grating monochromator beamline for angle-resolved photoemission spectroscopy, Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 523, 441 (2004).DOI
- [61]Ngankeu, A. S. et al., Quasi-one-dimensional metallic band dispersion in the commensurate charge density wave of 1T−TaS₂, Phys. Rev. B 96, 195147 (2017).DOI
- [62]Singha, R. et al., Signatures of topological surface state and unconventional magnetotransport properties in elemental ruthenium, Submitted (2022).DOI
- [63]Sadhukhan, P. et al., Electronic structure of Au-Sn compounds grown on Au(111), Phys. Rev. B 100, 235404 (2019).DOI
- [64]Zhang, P. et al., A precise method for visualizing dispersive features in image plots, Review of Scientific Instruments 82, 043712 (2011).DOI
- [65]Momma, K. and Izumi, F., Vesta 3 for three-dimensional visualization of crystal, volumetric and morphology data, Journal of Applied Crystallography 44, 1272 (2011).
- [66]Kresse, G. and Furthmüller, J., Efficient iterative schemes for ab−initio total-energy calculations using a plane-wave basis set, Phys. Rev. B 54, 11169 (1996).
- [67]Kresse, G. and Joubert, D., From ultrasoft pseudopotentials to the projector augmented-wave method, Phys. Rev. B 59, 1758 (1999).DOI
- [68]Perdew, J. P., Burke, K. and Ernzerhof, M., Generalized gradient approximation made simple, Phys. Rev. Lett. 77, 3865 (1996).
- [69]Blaha, P. et al., WIEN2k : An augmented plane wave plus local orbitals program for calculating crystal properties, Techn. Universitat 60 (2001).
- [70]Baroni, S., de Gironcoli, S., Dal Corso, A. and Giannozzi, P., Phonons and related crystal properties from density-functional perturbation theory, Rev. Mod. Phys. 73, 515 (2001).