betaFeedback

WorksPhysics and Astronomy

Bulk plasmons in elemental metals

Abstract

The spectral properties, momentum dispersion, and broadening of bulk plasmonic excitations of 26 elemental metals are studied from first principles calculations in the random-phase approximation. Spectral band structures are constructed from the resulting momentum- and frequency-dependent inverse dielectric function. We develop an effective analytical representation of the main collective excitations in the dielectric response, extending our earlier model based on multipole-Padé approximants (MPAs) to incorporate both momentum and frequency dependence [MPA(\q)]. With this representation, we identify plasmonic quasiparticle dispersions exhibiting complex features, including non-parabolic energy and intensity dispersions, discontinuities due to anisotropy, and overlapping effects that lead to band crossings and anti-crossings. Comparing with available experimental data, mainly in the optical limit, we find good agreement with the computed spectra. The results for elemental metals and their effective MPA(\q) representation establish a reference point that can guide both fundamental studies and practical applications in plasmonics and spectroscopy.

main.pdf

Bulk plasmons in elemental metals

Abstract

Introduction

Elemental metals, composed of a single type of metallic atom, are foundational to both modern technology and condensed matter physics [1, 2]. Examples encompass alkali metals (e.g., Na, K), alkaline earth metals (e.g., Mg, Ca), and noble (e.g., Al, Cu, Ag, Au) or other transition metals (e.g., Cr, Ti, Fe, Ni). These materials are characterized by high electrical and thermal conductivity, a strong but ductile metallic bonding, and a conduction band partially filled with delocalized electrons. Delocalized electrons respond collectively to external fields and are responsible for the characteristic optical and electronic properties that distinguish metals from insulators and semiconductors. Thus, understanding the electronic properties of elemental metals, including their collective excitations, is of significant theoretical and practical importance. Metals with a relatively simple electronic band structure, such as Al and alkali metals, host delocalized conduction electrons that behave nearly as a free-electron gas [3, 4, 5, 6]. This property, along with a substantial amount of available experimental data, makes them ideal systems for studying fundamental electronic excitations and their underlying many-body interactions.

Collective oscillations of the electron density give rise to plasmonic quasiparticles, or plasmons. Their origin lies in the long-range Coulomb restoring force acting on charge-density fluctuations, which produces well-defined modes in the free-electron gas, while in real materials, the plasmonic dispersions are modulated by their underlying electronic band structure and dielectric screening [7, 8, 9]. Plasmons can be excited by electromagnetic perturbations or incident charged particles, and appear as bulk or surface modes [10, 11]. Plasmons are central in several technological applications, including nanophotonics [12, 13], surface-enhanced spectroscopy [14], energy harvesting [15, 16], and emerging quantum plasmonic technologies [17, 18, 19]. Plasmonic properties can also be engineered by modifying the dielectric environment or the electronic structure, for example through alloying [20, 21].

Bulk plasmons correspond to longitudinal charge-density oscillations and are therefore optically inactive. They can be probed experimentally by methods such as electron energy-loss spectroscopy (EELS) [10, 11], where they appear as well-defined peaks in the measured spectra. Other techniques such as inelastic x-ray scattering and reflection electron energy loss spectroscopy (REELS) can also provide complementary insights into plasmonic properties [22, 23, 24, 25, 26, 27, 28]. In simple metals such as Al or Na, the plasmon peak is sharp and symmetric, akin to that of a free-electron gas [5, 10]. In contrast, in noble metals, such as Ag and Au, the occupied dd-bands introduce inter-band transitions that broaden and shift the plasmon resonance, and give rise to much richer spectra [4, 29]. Such experimental signatures are broadly employed for material characterization, from determining free-carrier concentrations, crystalline phases, and thicknesses to exploring nanoplasmonic effects and probing the electronic band structure [11, 27, 30].

Although the dielectric properties of elemental metals in the optical limit have been extensively studied and tabulated [4, 5, 8, 28, 29, 31], properties at finite momentum are not as widely available. For gapless metallic systems, strong electronic screening suppresses bound electron–hole (excitonic) effects, making the random-phase approximation (RPA) a well-established and widely used framework for describing bulk plasmon excitations [6, 8]. In this work, we report the frequency and momentum dependent inverse dielectric functions of 26 elemental metals computed from first principles within the RPA level of the many-body theory, using Kohn–Sham Bloch (KS) states obtained from density functional theory (DFT). We also provide an effective analytical representation of the main collective excitations in the inverse dielectric function, by generalizing our previous model based on multipole-Padé approximants (MPA) [32, 33, 34] to include momentum alongside frequency dependence. The generalized MPA model in two variables, MPA(q), is used to describe the main spectral properties of such excitations. It also shows potential to develop efficient methods to further reduce the computational cost of first-principles calculations such as GWGW and BSEBSE [6, 30], with respect to the original MPA method [32].

The paper is organized as follows: Sec. II details the theoretical framework (Sec. II A), the MPA and MPA(q) representations (Sec. II B), the set of studied materials (Sec. II C), and the computational details of the first-principle calculations (Sec. II D). Sec. III presents the results for the optical limit of intra-band contributions (Sec. III A), the comparison between RPA and the experimental spectra (Sec. III B), and the deviations from the free-electron gas model (Sec. III C), while results at finite momentum are used for the construction of spectral band structures (Sec. III D), and the generalized MPA(q) model (Sec. III E). Finally, Sec. IV holds the conclusions.

Methods

Theoretical framework

The complex dielectric function ε\varepsilon governs the response of a material to external electromagnetic fields. It depends on momentum q\mathbf{q} and frequency ω\omega. In the optical, or long-wavelength limit, q→0\mathbf{q} \to0, the dielectric function of the free-electron gas reduces to the Drude form, characterized by a single plasmon pole [4, 5, 35, 36, 37]. Within the RPA approximation, Lindhard theory extends the classical Drude model to include the q\mathbf{q} dependence [8, 9], providing a first-order quantum-mechanical description of the free-electron response. The dielectric response of real materials, often deviates from that of the homogeneous free-electron behavior, and is often much richer. The RPA dielectric function can be computed from first principles using KS-DFT states to evaluate the independent-particle microscopic polarizability, as follows

χGG′0(q,ω)=∑n,m∫BZdk(2π)3ρnmk∗(q,G)ρnmk(q,G′)×fnk−q(1−fmk)ω2−(ΩnmkqKS)22ΩnmkqKS(1)\chi^0_{GG'}(\mathbf{q},\omega)=\sum_{n,m}\int_{\mathrm{BZ}}\frac{d\mathbf{k}}{(2\pi)^3}\rho^*_{nmk}(\mathbf{q},\mathbf{G})\rho_{nmk}(\mathbf{q},\mathbf{G}')\times\frac{f_{n\mathbf{k}-\mathbf{q}}(1-f_{m\mathbf{k}})}{\omega^2-(\Omega^{\mathrm{KS}}_{nmk\mathbf{q}})^2}2\Omega^{\mathrm{KS}}_{nmk\mathbf{q}} \tag*{(1)}

where the nn and mm indices run over the bands, ρnmk(q,G)≡⟨nk∣ei(q+G)⋅r∣mk−q⟩\rho_{nmk}(\mathbf{q},\mathbf{G})\equiv\langle n\mathbf{k}|e^{i(\mathbf{q}+\mathbf{G})\cdot\mathbf{r}}|m\mathbf{k}-\mathbf{q}\rangle are transition matrix elements, the ff factors are the occupations of the KS states, ΩnmkqKS=(ϵmk−ϵnk−q)−iδ\Omega^{\mathrm{KS}}_{nmk\mathbf{q}}=(\epsilon_{m\mathbf{k}}-\epsilon_{n\mathbf{k}-\mathbf{q}})-i\delta are KS single-particle transitions, and the limit δ→0+\delta\to0^+ is implicit and ensures the correct time ordering [6].

The interacting microscopic polarizability and the inverse dielectric function are obtained by the Dyson equation:

χ=χ0+χ0vχ,(2)\chi=\chi_0+\chi^0v\chi, \tag*{(2)}
ε−1=1+vχ,(3)\varepsilon^{-1}=1+v\chi, \tag*{(3)}

where vv is the Coulomb potential. Even though the macroscopic polarizability, χ(q,ω)\chi(\mathbf{q},\omega), is given by the G=G′=0\mathbf{G}=\mathbf{G}'=0 component of the microscopic χ\chi, it is affected by the coupling of G,G′≠0\mathbf{G},\mathbf{G}'\ne0 components through Eq. (2). These contributions are commonly referred to as local-field effects, as they account for microscopic variations of the induced fields within the crystal. Their inclusion accounts for the difference between the independent-particle approximation (IPA) and RPA.

In metallic systems, χ0\chi_0 encompasses both intra- and inter-band transitions, which in Eq. (1) correspond to n=mn=m and n≠mn\ne m respectively, and thus χ0=χ0intra+χ0inter\chi_0=\chi_0^{\mathrm{intra}}+\chi_0^{\mathrm{inter}}. In the interacting polarizability χ\chi, such contributions mix according to the Dyson equation of Eq. (2) and cannot be simply splitted. In order to define intra- and inter-band frequencies from the interacting χ\chi, we can then take the case of semiconductors, that have only inter-band contributions, to define the following terms

χintra=χ−χinter,(4)\chi^{\mathrm{intra}}=\chi-\chi^{\mathrm{inter}}, \tag*{(4)}
χinter=χ0inter+χ0intervχinter.(5)\chi^{\mathrm{inter}}=\chi_0^{\mathrm{inter}}+\chi_0^{\mathrm{inter}}v\chi^{\mathrm{inter}}. \tag*{(5)}

This separation carries over to the dynamic part of the inverse dielectric function, Y≡vχ=ε−1−1Y\equiv v\chi=\varepsilon^{-1}-1, resulting in [33]

Y(q,ω)=Yintra(q,ω)+Yinter(q,ω),(6)Y(\mathbf{q},\omega)=Y_{\mathrm{intra}}(\mathbf{q},\omega)+Y_{\mathrm{inter}}(\mathbf{q},\omega), \tag*{(6)}

where Yintra=vχintraY_{\mathrm{intra}}=v\chi^{\mathrm{intra}} and Yinter=vχinterY_{\mathrm{inter}}=v\chi^{\mathrm{inter}}. Since χ0intra\chi_0^{\mathrm{intra}} vanishes in the q→0\mathbf{q}\to0 limit, so does χintra\chi^{\mathrm{intra}}. However, YintraY_{\mathrm{intra}} remains finite due to the divergence of the Coulomb potential vv. Therefore, in metals, the plasmonic quasiparticles observed in Y(q,ω)Y(\mathbf{q},\omega) at any value of q\mathbf{q} emerge from a mixture of intra- and inter-band contributions.

An important property of the imaginary part of YY, or the loss function Im⁡[−ε−1]\operatorname{Im}[-\varepsilon^{-1}], is the f-sum rule, which is conserved in the inversion of the Dyson equation (see Supplemental materials of Ref. [33]) and thus can be used to define corresponding intra-band, inter-band, and plasma frequencies:

ωintra2(q)≡2π∫0∞dω ω∣Im⁡[Yintra(q,ω)]∣,(7)\omega_{\mathrm{intra}}^2(\mathbf{q})\equiv\frac{2}{\pi}\int_0^\infty d\omega\,\omega|\operatorname{Im}[Y_{\mathrm{intra}}(\mathbf{q},\omega)]|, \tag*{(7)}
ωinter2(q)≡2π∫0∞dω ω∣Im⁡[Yinter(q,ω)]∣,(8)\omega_{\mathrm{inter}}^2(\mathbf{q})\equiv\frac{2}{\pi}\int_0^\infty d\omega\,\omega|\operatorname{Im}[Y_{\mathrm{inter}}(\mathbf{q},\omega)]|, \tag*{(8)}
ωpl2≡2π∫0∞dω ω∣Im⁡[Y(q,ω)]∣.(9)\omega_{\mathrm{pl}}^2\equiv\frac{2}{\pi}\int_0^\infty d\omega\,\omega|\operatorname{Im}[Y(\mathbf{q},\omega)]|. \tag*{(9)}

From Eq. (6) it follows that ωpl2=ωintra2(q)+ωinter2(q)\omega_{\mathrm{pl}}^2=\omega_{\mathrm{intra}}^2(\mathbf{q})+\omega_{\mathrm{inter}}^2(\mathbf{q}). Whereas ωpl\omega_{\mathrm{pl}} is q-independent, the respective intra- and inter-band contributions are q dependent, but with a dependence constrained by this condition.

The interacting χ\chi, and hence also YY, has a pole structure similar to that of χ0\chi_0 in Eq. (1). However, the large number of single-particle transitions ΩnmkqKS\Omega^{\mathrm{KS}}_{nmk\mathbf{q}} are mixed in the Dyson equation in Eq. (2), giving rise to plasmonic quasiparticles and thus resulting in much simpler envelope functions [33]. For many systems, YY in the optical limit q→0\mathbf{q} \to0 resembles the response of the free-electron gas [8, 38, 39], and can therefore be approximated by a single plasmon-pole model (PPA):

YPPA(q→0,ω)=Ω02ω2−Ω02,(10)Y^{\mathrm{PPA}}(\mathbf{q} \to0,\omega)=\frac{\Omega_0^2}{\omega^2-\Omega_0^2}, \tag*{(10)}

where the pole is located at the plasmon energy, Re⁡[Ω0]=ωpl\operatorname{Re}[\Omega_0]=\omega_{\mathrm{pl}}. In the free-electron gas the plasmon energy is related to the electronic density, ρe\rho_e, as (in Gaussian units)

ωpl=4πρe.(11)\omega_{\mathrm{pl}}=\sqrt{4\pi\rho_e}. \tag*{(11)}

The extension of the PPA model to finite q\mathbf{q} is given by [40, 41, 42, 43, 44, 45, 46, 47]

YPPA(q,ω)=2R(q)Ω(q)ω2−[Ω(q)]2,(12)Y^{\mathrm{PPA}}(\mathbf{q},\omega)=\frac{2R(\mathbf{q})\Omega(\mathbf{q})}{\omega^2-[\Omega(\mathbf{q})]^2}, \tag*{(12)}

where the pole has a quadratic dispersion according to the Drude/Lindhard model, Ω(q)≈Ω0(1+Ω′′q2/2)\Omega(\mathbf{q})\approx\Omega_0(1+\Omega^{\prime\prime}q^2/2), with an effective electron mass factor Ω′′\Omega^{\prime\prime}. The dispersion of the spectral weight is linked to the position of the pole by the f-sum rule of Eq. (9):

Ω02=2R(q)Ω(q),(13)\Omega_0^2=2R(\mathbf{q})\Omega(\mathbf{q}), \tag*{(13)}

which implies that R(q)R(\mathbf{q}) decreases with the inverse of Ω(q)\Omega(\mathbf{q}), as ∝1/q2\propto1/q^2.

Simple analytical representation: The multipole approach (MPA)

The RPA approximation is at the core of ab initio many-body theories beyond DFT, such as GWGW; however, expressing the operators in terms of single-particle excitations, as in the Lehmann representation of Eq. (1), is both computationally impractical and hinders the physical interpretation of collective features. Within first principles approaches, analytical models simplifying the frequency dependence of the dielectric function, starting from the (single-pole) PPA, have been used to reduce the computational cost. However, the use of PPA is subject to accuracy limitations [32, 33]. More complex models, such as Padé approximants and many-pole schemes, have often been used to fit and interpret individual experimental spectra [25, 48, 49, 50, 51, 52, 53]. Within ab initio GWGW calculations, effective MPA representations have been shown to provide an efficient description of the dielectric response, achieving an accuracy comparable to that of full-frequency approaches [32, 33, 34]. Such models generalize the PPA inverse dielectric response of Eq. (12) as

YMPA(q,ω)=∑pnY2Rp(q)Ωp(q)ω2−[Ωp(q)]2,(14)Y^{\mathrm{MPA}}(\mathbf{q},\omega)=\sum_{p}^{n_Y}\frac{2R_p(\mathbf{q})\Omega_p(\mathbf{q})}{\omega^2-[\Omega_p(\mathbf{q})]^2}, \tag*{(14)}

where the number of poles nYn_Y is typically around 10. In practice, poles and residues are obtained, for each q\mathbf{q}, by interpolation with a coarse sampling in the complex frequency plane [32, 33]. Despite considering each q\mathbf{q} separately, the procedure provides a good description of the q\mathbf{q} dispersion of the main poles [33]. MPA has also been combined with numerical methods to accelerate convergence with respect to the q\mathbf{q}-mesh, in the so-called constant approximation (CA) of Ref. [33] and the Monte Carlo WW averaging (W-av) of Refs. [54, 55].

In this work, we further advance this type of representation by proposing a generalized MPA model with an explicit q\mathbf{q} dependence, denoted MPA(q\mathbf{q}). We consider a polynomial dispersion of the poles and residues, following the Taylor expansion around q=0\mathbf{q}=0 of the independent-particle response and the free-electron gas. In practice, we truncate the expansion at the third order and consider specific q\mathbf{q}-directions:

Rp(q)≈Rp(1+Rp′q+Rp′′q2/2+Rp′′′q3/6),Ωp(q)≈Ωp(1+Ωp′q+Ωp′′q2/2+Ωp′′′q3/6),(15)\begin{aligned} R_p(\mathbf{q}) &\approx R_p(1+R'_p q+R''_p q^2/2+R'''_p q^3/6),\\ \Omega_p(\mathbf{q}) &\approx\Omega_p(1+\Omega'_p q+\Omega''_p q^2/2+\Omega'''_p q^3/6), \tag*{(15)} \end{aligned}

References

  1. [1]N. W. Ashcroft and N. D. Mermin, Solid State Physics (Holt, Rinehart and Winston, 1976).
  2. [2]C. Kittel, Introduction to Solid State Physics (John Wiley & Sons, Inc, 2005).
  3. [3]A. R. Menlyk and M. J. Harrison, Theory of optical excitation of plasmons in metals, Phys. Rev. B 2, 835 (1970).
  4. [4]E. Palik, Handbook of optical constants of solids (Academic Press, Institute for Physical Science and Technology University of Maryland College Park, Maryland, 1985) p. 283, 1st ed.
  5. [5]E. G. Maksimov, I. I. Mazin, S. N. Rashkeev, and Y. A. Uspenski, First-principles calculations of the optical properties of metals, J. Phys. F: Metal Phys. 18, 833 (1988).
  6. [6]R. M. Martin, L. Reining, and D. M. Ceperley, Interacting Electrons (Cambridge University Press, Cambridge, 2016).
  7. [7]D. Pines and P. Nozières, The Theory of Quantum Liquids, Vol. 1: Normal Fermi Liquids (Avalon Publishing, 1966).DOI
  8. [8]G. Giuliani and G. Vignale, Quantum Theory of the Electron Liquid (Cambridge University Press, 2005).
  9. [9]G. D. Mahan, Many-Particle Physics (Springer New York, NY, 2013).
  10. [10]H. Raether, Excitation of plasmons and interband transitions by electrons, Vol. 88 (Springer, 2006).
  11. [11]R. Egerton, Electron Energy-Loss Spectroscopy in the Electron Microscope (Springer, 2011).
  12. [12]W. L. Barnes, A. Dereux, and T. W. Ebbesen, Surface plasmon subwavelength optics, Nature 424, 824 (2003).
  13. [13]A. Karabchevsky, A. Katiyi, A. S. Ang, and A. Hazan, On-chip nanophotonics and future challenges, Nanophotonics 9, 3733 (2020).
  14. [14]M. Moskovits, Surface-enhanced spectroscopy, Rev. Mod. Phys. 57, 783 (1985).
  15. [15]H. A. Atwater and A. Polman, Plasmonics for improved photovoltaic devices, Nature Materials 9, 205 (2010).
  16. [16]S. K. Cushing and N. Wu, Progress and perspectives of plasmon-enhanced solar energy conversion, The Journal of Physical Chemistry Letters 7, 666 (2016).
  17. [17]Z. Jacob, Quantum plasmonics, MRS Bulletin 37, 761 (2012).
  18. [18]M. N. Gjerding, M. Pandey, and K. S. Thygesen, Band structure engineered layered metals for low-loss plasmonics, Nature Communications 8, 15333 (2017).
  19. [19]V. E. Babicheva, Optical processes behind plasmonic applications, Nanomaterials 13, 10.3390/nano13071270 (2023).
  20. [20]H. Möller and A. Otto, Plasmon dispersion in aluminum-magnesium alloys, Phys. Rev. Lett. 45, 2140 (1980).
  21. [21]O. K. Orhan and D. D. O’Regan, Plasmonic performance of auxgacul-x-y alloys from many-body perturbation theory, J. Phys.: Condens. Matter 31, 315901 (2019).
  22. [22]W. Schülke, H. Nagasawa, and S. Mourikis, Dynamic structure of electrons in Li by inelastic synchrotron x-ray scattering, Phys. Rev. Lett. 52, 2065 (1984).
  23. [23]W. Schülke, H. Nagasawa, S. Mourikis, and P. Lanzki, Dynamic structure of electrons in li metal: Inelastic synchrotron x-ray scattering results and interpretation beyond the random-phase approximation, Phys. Rev. B 33, 6744 (1986).
  24. [24]W. Schülke, H. Nagasawa, S. Mourikis, and A. Kaprolat, Dynamic structure of electrons in metal by inelastic x-ray scattering spectroscopy, Phys. Rev. B 40, 12215 (1989).
  25. [25]W. Schülke, Electron dynamics by inelastic X-ray scattering, Vol. 7 (OUP Oxford, 2007).
  26. [26]W. S. M. Werner, K. Glantschnig, and C. Ambrosch-Draxl, Optical constants and inelastic electron-scattering data for 17 elemental metals, Journal of Physical and Chemical Reference Data 38, 1013 (2009).
  27. [27]F. J. García de Abajo, Optical excitations in electron microscopy, Rev. Mod. Phys. 82, 209 (2010).
  28. [28]S. Babar and J. H. Weaver, Optical constants of cu, ag, and au revisited, Appl. Opt. 54, 477 (2015).
  29. [29]P. B. Johnson and R. W. Christy, Optical constants of the noble metals, Phys. Rev. B 6, 4370 (1972).
  30. [30]D. A. Leon, C. Elgvin, P. D. Nguyen, O. Prytz, F. S. Hage, and K. Berland, Unraveling many-body effects in zno: Combined study using momentum-resolved electron energy-loss spectroscopy and first-principles calculations, Phys. Rev. B 109, 115153 (2024).
  31. [31]M. N. Polyanskiy, RefractiveIndex.info database of optical constants, Scientific Data 11, 94 (2024).
  32. [32]D. A. Leon, C. Cardoso, T. Chiarotti, D. Varsano, E. Molinari, and A. Ferretti, Frequency dependence in gw made simple using a multipole approximation, Phys. Rev. B 104, 115157 (2021).
  33. [33]D. A. Leon, A. Ferretti, D. Varsano, E. Molinari, and C. Cardoso, Efficient full frequency gw for metals using a multipole approach for the dielectric screening, Phys. Rev. B 107, 155130 (2023).
  34. [34]D. A. Leon, K. Berland, and C. Cardoso, Spectral properties from an efficient analytical representation of the gw self-energy within a multipole approximation, Phys. Rev. B 111, 195147 (2025).
  35. [35]J. W. Allen and J. C. Mikkelsen, Optical properties of crsb, mnsb, nisb, and nias, Phys. Rev. B 15, 2952 (1977).
  36. [36]D. Y. Smith and B. Segall, Intraband and interband processes in the infrared spectrum of metallic aluminum, Phys. Rev. B 34, 5191 (1986).
  37. [37]K.-H. Lee and K. J. Chang, First-principles study of the optical properties and the dielectric response of al, Phys. Rev. B 49, 2362 (1994).
  38. [38]L. Hedin, New method for calculating the one-particle green’s function with application to the electron-gas problem, Phys. Rev. 139, A796 (1965).
  39. [39]A. L. Fetter and J. D. Walecka, Quantum theory of many-particle systems (McGraw-Hill, New York, 1971).
  40. [40]M. S. Hybertsen and S. G. Louie, Electron correlation in semiconductors and insulators: Band gaps and quasiparticle energies, Phys. Rev. B 34, 5390 (1986).
  41. [41]W. von der Linden and P. Horsch, Quasiparticle energies and hartree-fock bands of semiconductors and insulators, Phys. Rev. B 37, 8351 (1988).
  42. [42]S. B. Zhang, D. Tomańek, M. L. Cohen, S. G. Louie, and M. S. Hybertsen, Evaluation of quasiparticle energies for semiconductors without inversion symmetry, Phys. Rev. B 40, 3162 (1989).
  43. [43]R. W. Godby and R. J. Needs, Metal-insulator transition in kohn-sham theory and quasiparticle theory, Phys. Rev. Lett. 62, 1169 (1989).
  44. [44]G. E. Engel and B. Farid, Generalized plasmon-pole model and plasmon band structures of crystals, Phys. Rev. B 47, 15931 (1993).
  45. [45]M. Stankovski, G. Antonius, D. Waroquiers, A. Miglio, H. Dixit, K. Sankaran, M. Giantomassi, X. Gonze, M. Côté, and G.-M. Rignanese, G⁰W⁰ band gap of ZnO: Effects of plasmon-pole models, Phys. Rev. B 84, 241201 (2011).
  46. [46]A. Miglio, D. Waroquiers, G. Antonius, M. Giantomassi, M. Stankovski, M. Côté, X. Gonze, and G.-M. Rignanese, Effects of plasmon pole models on the G0W0 electronic structure of various oxides, Eur. Phys. J. B 85, 322 (2012).
  47. [47]P. Larson, M. Dvorak, and Z. Wu, Role of the plasmon-pole model in the gw approximation, Phys. Rev. B 88, 125205 (2013).
  48. [48]K.-H. Lee and K. J. Chang, Analytic continuation of the dynamic response function using an N-point Padé approximant, Phys. Rev. B 54, R8285 (1996).
  49. [49]Y.-G. Jin and K. J. Chang, Dynamic response function and energy-loss spectrum for li using an n-point padé approximant, Phys. Rev. B 59, 14841 (1999).
  50. [50]J. A. Soininen, J. J. Rehr, and E. L. Shirley, Multipole representation of the dielectric matrix, Phys. Scripta 2005, 243 (2005).
  51. [51]J. J. Kas, A. P. Sorini, M. P. Prange, L. W. Cambell, J. A. Soininen, and J. J. Rehr, Many-pole model of inelastic losses in x-ray absorption spectra, Phys. Rev. B 76, 195116 (2007).
  52. [52]J. J. Kas, J. V. Vinson, N. Trcera, D. Cabaret, E. L. Shirley, and J. J. Rehr, Many-Pole Model of Inelastic Losses Applied to Calculations of XANES, J. Phys. Conf. Ser. 190, 012009 (2009).
  53. [53]J. D. Bourke and C. T. Chantler, Electron energy loss spectra and overestimation of inelastic mean free paths in many-pole models, The Journal of Physical Chemistry A 116, 3202 (2012), pMID: 22390614.
  54. [54]A. Guandalini, D. A. Leon, P. D’Amico, C. Cardoso, A. Ferretti, M. Rontani, and D. Varsano, Efficient GW calculations via interpolation of the screened interaction in momentum and frequency space: The case of graphene, Phys. Rev. B 109, 075120 (2024).
  55. [55]G. Sesti, A. Guandalini, A. Ferretti, P. D’Amico, C. Cardoso, M. Rontani, and D. Varsano, Efficient gw calculations for metals from an accurate ab initio polarizability, https://arxiv.org/abs/2508.06930 (2025).
  56. [56]The EELS Atlas (accessed in 2025), https://eels.info/atlas.
  57. [57]A. G. Mathewson and H. P. Myers, Absolute values of the optical constants of some pure metals, Physica Scripta 4, 291 (1971).
  58. [58]P. O. Nilsson and G. Forssell, Optical properties of calcium, Phys. Rev. B 16, 3352 (1977).
  59. [59]M. Stöger-Pollach, Optical properties and bandgaps from low loss eels: Pitfalls and solutions, Micron 39, 1092 (2008).
  60. [60]N. Hiraoka, T. Hagiya, and K. Matsuda, Screening response of valence and core electrons in a metal: Inelastic x-ray scattering study, Phys. Rev. B 108, 195104 (2023).
  61. [61]A. Seidu, A. Marini, and M. Gatti, Dynamical correlation effects in a weakly correlated material: Inelastic x-ray scattering and photoemission spectra of beryllium, Phys. Rev. B 97, 125144 (2018).
  62. [62]A. vom Felde, J. Sprösser-Prou, and J. Fink, Valence-electron excitations in the alkali metals, Phys. Rev. B 40, 10181 (1989).
  63. [63]M. Cazzaninga, H.-C. Weissker, G. Huotari, T. Pylkkänen, P. Salvestrini, G. Monaco, G. Onida, and L. Reining, Dynamical response function in sodium and aluminum from time-dependent density-functional theory, Phys. Rev. B 84, 075109 (2011).
  64. [64]T. Kloos and H. Raether, The dispersion of surface plasmons of al and mg, Physics Letters A 44, 157 (1973).
  65. [65]E. Petri, A. Otto, and W. Hanke, Anisotropy of plasmon dispersion in al: An electron correlation effect, Solid State Communications 19, 711 (1976).
  66. [66]P. E. Batson, C. H. Chen, and J. Silcox, Plasmon dispersion at large wave vectors in al, Phys. Rev. Lett. 37, 937 (1976).
  67. [67]P. E. Batson and J. Silcox, Experimental energy-loss function, Im[−1/ε(q,ω)], for aluminum, Phys. Rev. B 27, 5224 (1983).
  68. [68]J. Sprösser-Prou, A. vom Felde, and J. Fink, Aluminum bulk-plasmon dispersion and its anisotropy, Phys. Rev. B 40, 5799 (1989).
  69. [69]I. Abril, R. Garcia-Molina, C. D. Denton, F. J. Pérez-Pérez, and N. R. Arista, Dielectric description of wakes and stopping powers in solids, Phys. Rev. A 58, 357 (1998).
  70. [70]A. Aulkass, S. D. Schneider, C. Hébert, S. Sagmeister, and C. Draxl, Dynamic structure factors of cu, ag, and au: Comparative study from first principles, Phys. Rev. B 88, 195124 (2013).
  71. [71]Wolfram research inc (accessed in 2025), https://periodictable.com/Properties/A/LatticeConstants.html.
  72. [72]Y. Sun, L. Zhao, C. J. Pickard, R. J. Hemley, Y. Zheng, and M. Miao, Chemical interactions that govern the structures of metals, Proceedings of the National Academy of Sciences 120, e22181405120 (2023).
  73. [73]P. Giannozzi, S. Baroni, N. Bonini, M. Calandra, R. Car, C. Cavazzoni, D. Ceresoli, G. L. Chiarotti, M. Cococcioni, I. Dabo, A. D. Corso, S. de Gironcoli, S. Fabris, G. Fratesi, R. Gebauer, U. Gerstmann, C. Gougoussis, A. Kokalj, M. Lazzeri, L. Martin-Samos, N. Marzari, F. Mauri, R. Mazzarello, S. Paolini, A. Pasquarello, L. Paulatto, C. Sbraccia, S. Scandolo, G. Sclauzero, A. P. Seitsonen, A. Smogunov, P. Umari, and R. M. Wentzcovitch, QUANTUM ESPRESSO: a modular and open-source software project for quantum simulations of materials, J. Phys.: Condens. Matter 21, 395502 (2009).
  74. [74]P. Giannozzi, O. Andreussi, T. Brumme, O. Bunau, M. B. Nardelli, M. Calandra, R. Car, C. Cavazzoni, D. Ceresoli, M. Cococcioni, N. Colonna, I. Carnimeo, A. D. Corso, S. de Gironcoli, P. Delugas, R. A. DiStasio, A. Ferretti, A. Floris, G. Fratesi, G. Fugallo, R. Gebauer, U. Gerstmann, F. Giustino, T. Gorni, J. Jia, M. Kawamura, H.-Y. Ko, A. Kokalj, E. Küçükbenli, M. Lazzeri, M. Marsili, N. Marzari, F. Mauri, N. L. Nguyen, H.-V. Nguyen, A. O. de-la Roza, L. Paulatto, S. Poncé, D. Rocca, R. Sabatini, B. Santra, M. Schliph, A. P. Seitso-nen, A. Smogunov, I. Timrov, T. Thonhauser, P. Umari, N. Vast, X. Wu, and S. Baroni, Advanced capabilities for materials modelling with Quantum ESPRESSO, J. Phys.: Condens. Matter 29, 465901 (2017).
  75. [75]J. P. Perdew, K. Burke, and M. Ernzerhof, Generalized gradient approximation made simple, Phys. Rev. Lett. 77, 3865 (1996).
  76. [76]D. R. Hamann, Optimized norm-conserving Vanderbilt pseudopotentials, Phys. Rev. B 88, 085117 (2013).
  77. [77]A. Marini, C. Hogan, M. Grüning, and D. Varsano, yambo: An ab initio tool for excited state calculations, Comput. Phys. Commun. 180, 1392 (2009).
  78. [78]D. Sangalli, A. Ferretti, H. Miranda, C. Attaccalite, I. Marri, E. Cannuccia, P. Melo, M. Marsili, F. Paleari, A. Marrazzo, G. Prandini, P. Bonfà, M. O. Atambo, F. Affinito, M. Palummo, A. Molina-Sánchez, C. Hogan, M. Grüning, D. Varsano, and A. Marini, Many-body perturbation theory calculations using the yambo code, J. Phys.: Condens. Matter 31, 325902 (2019).
  79. [79]V. P. Zhukov, F. Aryasetiawan, E. V. Chulkov, and P. M. Echenique, Lifetimes of quasiparticle excitations in 4d transition metals: Scattering theory and norm-preserving approaches, Phys. Rev. B 65, 115116 (2002).
  80. [80]T. Rangel, D. Keçik, P. E. Trevisanutto, G.-M. Rignanese, H. Van Swygenhoven, and V. Olenov, Band structure of gold from many-body perturbation theory, Phys. Rev. B 86, 125125 (2012).
  81. [81]G. Prandini, G. Rignanese, and N. Marzari, Photorealistic modelling of metals from first principles, npj Comput. Mater. 5, 10.1038/s41524-019-0266-0 (2019).
  82. [82]F. Wooten, Optical properties of solids (Academic Press, 1972).
  83. [83]K. Sturm, Band structure effects on the plasmon dispersion in simple metals, Zeitschrift für Physik B Condensed Matter 29, 27 (1978).
  84. [84]J. A. Budagosky and E. E. Krasovskij, All-electron product basis set: Application to plasmon anisotropy in simple metals, Phys. Rev. B 99, 245149 (2019).
  85. [85]S. Kaltenborn and H. C. Schneider, Plasmon dispersions in simple metals and heusler compounds, Phys. Rev. B 88, 045124 (2013).
  86. [86]See Supplemental Materials for a detailed description.
  87. [87]D. A. Leon, (2025), https://github.com/DarioALeonValido/MPAg_metals.

Paper details

vlnc:W_xzantpa5
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents