WorksPhysics and Astronomy
Fourier Transform of the Scalar Propagator with Quantum Light-Cone Fluctuations
Abstract
We derive the Lorentzian Fourier transform of the Gaussian-smeared light-cone contribution to the scalar propagator in Krein-space quantization in terms of a Meijer -function. We characterize its distributional structure, recover the massive propagator by adding the Bessel-function tail, and derive an exact expression for the massless one-loop bubble kernel using a position-space prescription.
Introduction
Krein-space quantization introduces an indefinite inner product and auxiliary negative-norm degrees of freedom. For the scalar two-point function considered here, the resulting time-ordered kernel is the real, principal-value part of the conventional Feynman propagator [1]. Metric fluctuations can broaden the classical light cone, motivating the replacement of its delta-function contribution by a Gaussian [2, 3]. We adopt a Gaussian of finite width, normalized as a distribution in the invariant interval.
The Fourier transform of this Gaussian is not an absolutely convergent four-dimensional integral, since the Gaussian remains constant along the noncompact surfaces of fixed Minkowski interval. Consequently, treating it as a Euclidean radial transform would alter the problem. We therefore compute the Lorentzian Fourier transform in four-dimensional Minkowski space in the sense of tempered distributions. An auxiliary Gaussian integral reduces the calculation to an Abel-summed sine integral, which we evaluate in terms of a Meijer -function.
We obtain explicit expressions for timelike and spacelike momenta and determine the distributional extension at the null cone. This analysis separates the principal-value massless pole from a continuous remainder. Adding the Bessel-function tail yields the massive propagator and demonstrates the cancellation of the massless pole when the light-cone smearing has unit normalization. We then apply this result to derive an exact expression for the massless one-loop bubble kernel using a position-space prescription.
Throughout this work, we use a constant positive smearing parameter , which characterizes the Gaussian width and is related to the metric-fluctuation variance. This prescription defines a model for the light-cone contribution rather than a general metric-averaged propagator. In a more general treatment, the variance may depend on the two spacetime points and on the gravitational state; here, we approximate it by a constant to obtain an analytically tractable model.
Conventions and the smearing model
We work in four-dimensional Minkowski spacetime with
We set
Our Fourier-transform conventions are
where .
The unsmeared scalar time-ordered kernel in Krein-space quantization is defined by [1, 3]
Its coordinate-space representation is
The Bessel contribution is evaluated for and extended by zero for . At the light cone, the ratio is defined by its continuous limit . The value assigned to does not affect the distribution. For the massless field, we set .
Quantum metric fluctuations motivate a Gaussian smearing of the light-cone contribution [2, 3]. We introduce the normalized Gaussian
We smear the delta distribution in the Minkowski interval according to
Since and , this prescription is equivalent to replacing by in (5). The resulting propagator model is
Here denotes the square of the Minkowski interval, not a Euclidean radial norm. The prescription smears only the light-cone contribution and leaves the Bessel-function tail unchanged.
For , the Fourier representation of the Bessel contribution is
The principal-part prescription in this expression is defined by
This specifies the distribution through its partial-fraction decomposition.
The Fourier transform of is defined by
Consequently,
For , the Bessel contribution vanishes and . All Fourier transforms are understood in the sense of tempered distributions.
In units , the dimensions are
If the first-order interval fluctuation is modeled as a centered Gaussian random variable with constant variance , then
Under this Gaussian model, averaging broadens the light-cone contribution [2]. Comparison with the smearing in (9) gives . The variance depends on the gravitational state and its correlations; a quantitative relation to graviton density requires specifying that state. Here and below, single angle brackets denote expectation values over metric fluctuations.
The model (9) is an approximation to the metric-averaged propagator, rather than a general expression for that average. The normalized smearing ensures the distributional zero-width limit
Here denotes the space of tempered distributions, the continuous dual of the Schwartz space of smooth functions whose derivatives of every order decrease faster than any inverse power at infinity. The convergence means that
where denotes the action of the distribution on the test function . For the bounded function , this action is given by
The alternative Gaussian coefficient multiplies by . It therefore gives a different zero-width normalization when the Bessel tail is unchanged. We use (9) consistently below; Appendix § 9 records the conversion to the alternative coefficient.
Distributional Lorentzian Fourier transform
Since is bounded, it defines a tempered distribution on Minkowski spacetime . Its Fourier transform can be obtained by Gaussian regularization:
where the limit is taken in . The integration variables remain real. The positive-definite Gaussian regulator ensures absolute convergence for without a Wick rotation. Although the regulator breaks Lorentz invariance at finite , the limiting Fourier transform is Lorentz invariant because depends only on .
We use the auxiliary identity
With the regulator retained, the coordinate integrations are Gaussian. For , the corresponding distributional Fresnel limit is
The phase factor follows from one time integration and three spatial integrations. Evaluating the coordinate integrals at finite and then taking the distributional limit gives
The integral at inherits its prescription from the original regulated Fourier transform; it is not an ordinary improper integral.
Pairing the contributions from positive and negative , and then setting on the positive half-line, yields
Here Abel summation means inserting and taking in the sense of tempered distributions. The unregulated sine integral is not an ordinary improper integral because its amplitude tends to one at infinity.
A useful distributional decomposition is
The first term follows from
The amplitude in the second integral is integrable:
Consequently, the second term in (24) defines a continuous odd function of .
To justify the corresponding decomposition in four-momentum space, subtract the unsmeared massless light-cone kernel before removing the regulator in (19). In the auxiliary representation, this subtraction replaces by . After pairing with a Schwartz function, the regulated coordinate integrals are bounded uniformly by a constant times for : the modulus of the regulated Gaussian prefactor is at most , and the remaining exponential has modulus at most one. Thus the subtracted integrand has an integrable majorant proportional to
Dominated convergence therefore applies to the subtracted integral after pairing with Schwartz test functions. The unsmeared massless light-cone term is fixed by (5) and transforms to . Thus (23) is understood explicitly as
Here
This separates the principal-value massless pole from a continuous remainder, which vanishes at , and fixes the transform without additional terms supported on the null cone. All exchanges of integrations are understood with the stated regulators or after pairing with Schwartz test functions.
Meijer representation
For , integration by parts in the Abel sense gives an absolutely convergent cosine integral:
Define . Using a regulator for the oscillatory interchange gives
This route avoids using the elementary Mellin transform of the sine outside its initial strip of validity. With , the duplication and reflection identities give
Comparison with the Mellin–Barnes definition [4] gives
Oddness supplies the result for negative . Consequently, away from ,
The factor is essential. Dependence on alone would give the wrong spacelike sign.
Define the dimensionless function
The shift identity for the Meijer -function gives the equivalent pointwise formula
At the null cone, the Fourier transform determined by (19) has the explicit decomposition
Here is the real part of the distributional boundary value of . Equation (37), equivalently (24), specifies the meaning of the special-function expression at .
Subtracting the massless version of (5) from the massive one fixes the tail transform without an additional integration:
The frequently used notation means precisely this difference, not an unspecified product of singular distributions. Combining (37) and (38), we obtain
For , the massless pole cancels exactly. For , the massless pole remains. The massive physical pole at is also retained. A principal-value pole is a well-defined distribution, but it is not a bounded function. Both limiting operations are consistent:
in . The second limit is not obtained by taking a fixed- infrared expansion and then setting .
Infrared and large-invariant-momentum behavior
Expansion near the null cone
The coincident poles in the Mellin–Barnes representation of generate logarithms. Its residue expansion is
where is the digamma function. In particular, as ,
Here denotes the Euler–Mascheroni constant. Thus, for fixed and ,
This proves that is continuous at but is not differentiable there. For and ,
For , the leading term is instead . Accordingly, smearing does not remove the massless propagator pole. Whether a particular amplitude has an infrared divergence depends on its full integrand and external kinematics.
Large invariant momentum
The function in (30) is flat at , and all its derivatives are integrable and vanish at both integration endpoints. Repeated integration by parts therefore shows that, for every integer ,
Consequently decreases faster than every inverse power of for fixed . No particular exponential rate is needed for this conclusion. The massive tail then determines the algebraic asymptotics:
This is an expansion away from the pole surfaces. Large is not the same as large Euclidean norm of the four-momentum: arbitrarily large momenta can remain close to the light cone.
Coordinate-space regularity and a massless bubble kernel
At fixed , is smooth and bounded. For , the Bessel-function tail is bounded but has a finite jump across the light cone. As ,
whereas for . For fixed and ,
Thus the full kernel has finite one-sided limits at the light cone, although it is not continuous there for . Its value on the light cone, including at coincidence, depends on the convention chosen for the jump. This choice does not affect the associated distribution.
For a concrete application, let denote the external four-momentum flowing through the bubble, and set . We define the massless bubble kernel as the Fourier transform of an ordinary bounded product:
where the Fourier transform is understood in . Direct multiplication gives
Hence the exact result in this prescription is
For , this becomes
The bubble kernel is dimensionless, as required. Its distributional extension at the null cone is
In particular, it retains a principal-value singularity at . One may write the symbolic momentum-space convolution
provided the right-hand side is understood through (49), or a compatible limiting prescription. Here denotes the loop momentum, so the two internal lines carry momenta and . A convolution of arbitrary tempered distributions is not automatically defined by an ordinary integral.
For the interaction , we use vertex factor and internal-line factor . We adopt the convention and define the invariant scattering amplitude by
where and are the total initial and final four-momenta. With these conventions, the formal amputated -channel contribution is
where is the diagram’s symmetry factor. Interpreting this expression as a physical scattering amplitude additionally requires specifying the interacting Krein-space rules and the physical-state prescription.
For the massive case, the same position-space prescription gives
All three coordinate-space products are bounded and define tempered distributions. Only the first term has been reduced here to the displayed Meijer -function. Moreover, multiplying averaged propagators is a specified effective prescription: in general,
when the same fluctuating metric enters both factors.
Conclusion
The Gaussian light-cone model admits an exact Lorentzian Fourier transform. Its Meijer -function representation must include the factor (the timelike-spacelike sign) and a specified extension at the null cone. With unit-normalized light-cone smearing, the massive result is the principal-value massive pole plus a continuous correction; the massless result retains its principal-value massless pole. For fixed , the Gaussian contribution decays faster than any inverse power of as , while the massive tail has the algebraic behavior . At fixed positive smearing width, the bounded coordinate-space kernels allow ordinary products for the nonderivative examples considered here. The exact bubble illustrates both the usefulness and the limits of that statement: its Fourier transform is well defined as a tempered distribution, although it retains a principal-value singularity at . To establish ultraviolet and infrared finiteness and determine whether renormalization conditions are required, further work should specify the metric correlations, the averaging of products, and the interacting physical-state prescription before extending the calculation to general amplitudes.
Acknowledgements
The author acknowledges ChatGPT for its assistance in discussions of the Meijer -function.
Alternative Gaussian normalizations
For , we consider the alternative Gaussian term
Keeping this coefficient is mathematically possible, but its zero-width limit is , rather than the light-cone term in (5). Its exact transform is
If the Bessel tail is left unchanged, the full transform with the alternative normalization is
For , the massless pole therefore cancels only when . Equation (9) adopts unit normalization to recover the stated unsmeared propagator. This changes the model normalization; it is not an algebraic rearrangement of the alternative coefficient.
The coefficient in Eq. (2.5) of Ref. [3] must be compared using the variance appearing there. Writing and , its light-cone term is
Thus that printed coefficient differs by a factor from the unit-normalized Gaussian average adopted here. The factor above instead concerns the alternative expression written directly in terms of with exponent . For the coefficient printed in Ref. [3], the preceding conversion formulas apply with after matching the widths.
Notation and computational checks
The Meijer -function is represented in grouped computational notation as
There are no upper parameters. The lower parameters are divided into two groups: and contribute the numerator factors , whereas contributes the denominator factor . Explicitly,
Here is a positive real constant specifying the vertical contour in the complex -plane. The contour lies to the right of all poles of and .
For a numerical check of (34), one may compare the Meijer -function expression for with the convergent cosine integral (30), rather than truncating the nonconvergent, unregularized sine integral. Near , the expansion (43) can be used to avoid loss of numerical precision caused by subtractive cancellation.
References
- [1]M. V. Takook, Negative norm states in de Sitter space and QFT without renormalization procedure, Int. J. Mod. Phys. E 11 (2002), 509–518. doi:10.1142/S0218301302001071; arXiv:gr-qc/0006019.DOI
- [2]L. H. Ford, Gravitons and light cone fluctuations, Phys. Rev. D 51 (1995), 1692–1700. doi:10.1103/PhysRevD.51.1692.DOI
- [3]M. V. Takook, “Krein” regularization method, Mod. Phys. Lett. A 37 (2022), 2250059. doi:10.1142/S0217732322500596; arXiv:2112.05390.DOI
- [4]NIST Digital Library of Mathematical Functions, Chapter 16, Sec. 16.17, Definition of the Meijer G-function, https://dlmf.nist.gov/16.17.