betaFeedback

WorksEngineering

Miniaturized Low-Cost 3-D Printed High-Permittivity Dielectric Transmissive LP-to-CP Converter for L-Band Satellite Communications

Abstract

A low-cost, miniaturized, additively manufactured transmissive linear-to-circular polarization converter for L-band air and space communication systems is presented. The proposed polarizer employs an in-house-fabricated high-permittivity dielectric medium, realized using a 3-D printed polylactic acid (PLA) enclosure filled with a TiO2_2–water mixture. Variation in the effective permittivity is achieved by adjusting the mixture filling fraction. The selected 60% filling fraction corresponds to an effective relative permittivity of 11.3 at 1 GHz. The high-permittivity loading enables miniaturization of the polarizer height and area by reducing the anisotropic dielectric unit-cell dimensions to 0.037λ0×0.037λ0×0.22λ0\boldsymbol{0.037λ_0 \times 0.037λ_0 \times 0.22λ_0}. An additively manufactured polarizer with overall dimensions 0.83λ0×0.77λ0×0.22λ0\boldsymbol{0.83λ_0 \times 0.77λ_0 \times 0.22λ_0} is experimentally validated using a compact linearly polarized feed source. The measured results demonstrate LP-to-CP conversion, with a 3 dB axial ratio of 12% and insertion loss of less than 0.6 dB. Radiation-pattern measurements at 1 GHz show LHCP-to-RHCP discrimination levels of 19 and 24 dB in the xz- and yz-planes, respectively. The proposed configuration combines miniaturization, LP-to-CP conversion, and low-cost additive manufacturing, making it promising for UAV-mounted and other size-constrained L-band satellite communication terminals.

Paper details

vlnc:W_y9kk2ep3
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
arXiv nonexclusive license
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Engineering

Not recorded for this paper

View statement
Looking for related papers…