WorksEngineering
Integrated Co-design Framework for High-Efficiency Assembly and Integration of Small Satellites
Abstract
The rapid growth of small-satellite constellations has increased the need for higher manufacturing throughput, lower production costs, and shorter turnaround times. This makes efficient assembly, integration, and testing (AIT) increasingly important. Building on our prior work, this paper presents an integrated design-for-AIT approach for the 65 kg Lumelite-5 satellite. The integrated approach incorporates co-designing the satellite configuration, structural interfaces, subsystem placement, harness routing, and ground support equipment to facilitate efficient AIT. Service interfaces are centralized on one satellite side to simplify electrical ground support equipment access and routing. Skeletal support interfaces are developed to retain mounted components and service interfaces when removable enclosures are opened to expose internal harness-routing paths for inspection, troubleshooting, and rework. Defined mechanical references further support controlled removal and reinstallation of sensors and components. A removable double hinge ground-support mechanism allows the top deck to open up to 180 degrees relative to the bottom deck while accommodating interconnecting-harness articulation, without introducing permanent hinge mass and complexity to the satellite. Finally, dedicated harness-routing and tie-down provisions provide predefined yet adjustable restraint locations to accommodate as built routing variations and maintain controlled harness articulation during top-deck rotation. Through this work, we demonstrate how co-designing satellite architecture and AIT processes from the early development stages can support more scalable, repeatable, and efficient constellation production.