betaFeedback

WorksPhysics and Astronomy

Synchronization-controlled transport near an absorbing transition: Effective Enskog kinetic theory of a driven granular monolayer

Abstract

Synchronization with vibrating boundaries can qualitatively alter the dynamics of confined granular fluids and control the collision-induced transfer of energy to horizontal motion. We develop an Enskog kinetic theory for the active phase of a driven granular monolayer within the framework of the ΔΔ-model, which accounts for the transfer of energy from the vertical to the horizontal degrees of freedom of grains. Synchronization effects are incorporated through a state-dependent effective collision rule governed by the interplay between the local collision frequency and a characteristic synchronization time. A viscous drag force is also included to account for energy dissipation arising from interactions with the confining plates. Within this framework, we characterize the homogeneous active state and use it as the reference state for a Chapman–Enskog expansion. The solution of the Enskog equation to Navier–Stokes order then yields explicit expressions for the shear and bulk viscosities, the thermal conductivity, the diffusive heat coefficient, and the first-order contribution to the cooling rate, consistently accounting for inelasticity, damping, finite-density effects, and synchronization. Event-driven molecular-dynamics simulations show that the theory accurately describes the steady temperature and shear and bulk viscosities over a broad region of the active phase. Close to the discontinuous synchronization-controlled absorbing transition, deviations are mainly attributed to the mean-field coarse-graining of the microscopic synchronization dynamics: fluctuations of the collision-dependent injection amplitude and correlations between synchronization and pre-collisional velocities become increasingly important. These results provide a kinetic description of synchronization-controlled transport and delineate its range of validity near the absorbing transition.

Introduction

Like equilibrium matter, granular materials exhibit solid-, liquid-, and gas-like states.1 Unlike equilibrium matter, however, they continually dissipate energy through interparticle interactions and require external driving to sustain their motion, keeping them out of equilibrium.2,3 Vertically vibrated grains confined between closely spaced horizontal plates provide an experimentally accessible setup for investigating the physics of such granular systems.4–6 Individual trajectories can be tracked while density, confinement, and driving parameters are varied. Experiments on such vibrated granular systems find many collective effects such as crystallization, melting, and solid–fluid coexistence,7–14 with transitions controlled by non-equilibrium driving.15–18 Clustering and liquid–gas phase separation have also been observed experimentally and numerically in the absence of attractive interactions.19–24 Segregation in related systems raises the industrially relevant questions of controlling mixing and separation of grains.25–34 Standing waves and localized excitations in such systems further illustrate how diverse the collective responses are.35–38 Together, these phenomena make vibrated granular systems a useful setting for linking dissipative particle dynamics to collective organization.

While the resulting state in granular systems may often look equilibrium-like in some respect, finer observables typically reveal the non-equilibrium nature of the system: velocity distributions are non-Gaussian,[43, 44] [39, 40, 41, 42] molecular chaos[45, 46, 47, 48, 49] or equipartition[50, 51, 52] may not hold, and although individual grain trajectories can resemble Brownian motion,[53, 54, 55] their collective dynamics depart from equilibrium by showing strong violations of the fluctuation–dissipation theorem.[56, 57, 58]

These observations called for a simple model suitable for numerical and theoretical studies of these nonequilibrium effects. A direct approach is to resolve theoretically the experimental geometry: grains confined between vibrating plates receive energy through vertical motion and transfer part of it to horizontal motion through oblique grain–grain collisions.[59, 60, 61, 62, 63, 64] Although this energy transfer controls the homogeneous state and its instabilities,[65, 66] [24] retaining the full vertical dynamics complicates a hydrodynamic description. The effective two-dimensional Δ\Delta-model offers a simpler approach by representing this transfer directly in the collision rule.[67] Particles move in a two-dimensional plane and receive a separation velocity increment Δ\Delta at each collision, so that energy injection competes with inelastic dissipation while conserving pair momentum.[68, 69] The complex 3D vibrations along the vertical axis are replaced by effective collisions that can inject energy in the two-dimensional plane. This simple collision rule allows for computations of the transport coefficients of the resulting fluid, including in the dense regime,[70, 71, 72] as summarized in the recent review.[73] Its homogeneous state and stability have been studied in detail,[74, 75] and extensions address equipartition, diffusion, and segregation in mixtures.[76, 77, 78, 79, 80] Variations of this model have also been used to investigate phase separation, nonequilibrium interfaces or effective chiral interactions.[81, 82, 83, 84] [23]

The Δ\Delta-model nevertheless neglects interactions between grains and the confining plates in three-dimensional systems. Besides supplying vertical energy, the plates dissipate horizontal motion through friction. At low density, grain–grain collisions become too rare to replenish this lost horizontal energy, and the grains can stop moving horizontally despite continued vertical vibration.[85] To capture this effect, the model can be supplemented with a drag term −γ(v−Uw)-\gamma(\mathbf{v}-\mathbf{U}_{\mathrm{w}}), which relaxes the grain velocity v\mathbf{v} toward the horizontal plate velocity Uw\mathbf{U}_{\mathrm{w}}, usually set to zero.[86, 87] Plate roughness also introduces fluctuations in the horizontal velocity at contact,[57, 58, 88] which can be represented by weak stochastic forcing. Both damping and stochastic forcing modify the hydrodynamic behavior of the system, as shown in Ref. 89, in which the transport coefficients of this model were derived.

A final ingredient absent from the Δ\Delta-model is synchronization with the vibrating plate. Under suitable driving conditions, grains can settle into periodic vertical motion locked to the plate oscillation.[90, 91, 92, 93, 94, 95] Simple dynamical models of a bouncing ball explain this locking through transitions between chaotic and periodic motion,[96, 97, 98] as the driving parameters are varied. Such a synchronization mechanism can have dramatic effects on the dynamics of the system.[95] Recent numerical studies have shown that it plays a central role in the absorbing transition exhibited by quasi-two-dimensional vibrated granular systems.[86, 87] In particular, Maire et al.[87] demonstrated that synchronization can qualitatively alter the nature of the transition between horizontally active and absorbing states. Indeed, synchronized grains collide at nearly equal heights. This suppresses vertical-to-horizontal energy transfer, which in turn makes the horizontal motion stop even without drag.[86, 87] Frequent collisions at high density disrupt this synchronization, whereas longer collision intervals let the vertical motion synchronize. To represent this mechanism in the 2D Δ\Delta-model described above, we assume that a grain synchronizes with the plate after a collision-free interval of duration τs\tau_s, and that each collision disrupts this synchronization. The velocity increment Δij\Delta_{ij} then depends on the state of the two grains just before they collide: it is zero if both are synchronized and takes a finite value otherwise. A schematic illustration of the system is shown in Figure 1.

Figure 1. Schematic illustration of a confined granular monolayer between vertically vibrating plates. (a) Asynchronous collision: if at least one particle has collided within the synchronization time τs\tau_s, energy is injected through velocity increments ±Δσ^\pm\Delta\hat{\boldsymbol{\sigma}}. (b) Synchronized collision: if both particles have remained collision-free for longer than τs\tau_s, energy injection is suppressed (Δij=0\Delta_{ij}=0). Purple arrows indicate the vertical particle motion. The lower sketches represent the effective horizontal dynamics in the xyxy plane. In each lower sketch, the isolated particle illustrates the viscous drag −γv-\gamma\mathbf{v}, opposing the horizontal velocity v\mathbf{v}.

Within the kinetic description proposed in Ref. 86, this history dependence was treated at a mean-field level by replacing the collision-dependent injection amplitude Δij\Delta_{ij} by an effective quantity Δ‾ij\overline{\Delta}_{ij} controlled by the competition between the collision frequency and the synchronization time. This approximation provides a simple description of the homogeneous active branch and captures, at a mean-field level, the synchronization mechanism underlying the termination of the active branch and the consequent discontinuous absorbing transition observed in this system. In this regime, a decrease in the collision frequency favors synchronization, which reduces the effective horizontal energy injection and therefore lowers the granular temperature. The resulting decrease in the collision frequency further enhances synchronization, producing a positive feedback that eventually terminates the finite-temperature active branch. Thus, the discontinuous transition is associated with the loss of the finite-temperature active solution rather than with a progressive vanishing of the active population.

In the absence of synchronization, a continuous transition can instead emerge through a distinct mechanism. In this case, the system approaches the absorbing state through a progressive change in the population dynamics. Close to criticality, the system develops a heterogeneous population of active and inactive particles, and the absorbing transition occurs through the progressive vanishing of the active fraction rather than through the disappearance of the kinetic energy carried by active particles. Consequently, a homogeneous description in which all particles are treated as active cannot reproduce this critical regime quantitatively.

A complementary issue concerns the hydrodynamic description of the active state. In Ref. 86, the transport coefficients entering the hydrodynamic theory were approximated by their equilibrium hard-disk expressions. However, in a recent work,[89] the Navier–Stokes transport coefficients of the Δ\Delta-model at moderate densities in the presence of viscous drag and stochastic forcing were derived, showing that external dissipation and collisional injection can substantially modify transport. Thus, the question arises as to whether, and if so to what extent, the conclusions drawn from Ref. 86 may be altered when the correct forms of the Navier–Stokes transport coefficients are accounted for.

While the role of synchronization in the homogeneous energy balance and in the absorbing transition has been characterized in previous studies,[86, 87] a consistent transport theory for the synchronized active state is still lacking. In particular, synchronization introduces an additional feedback that is absent from the conventional Δ\Delta-model: local variations of density and temperature modify the collision frequency and therefore the degree of synchronization, which in turn changes the amount of energy injected through collisions. In the present work, we incorporate this feedback into an Enskog kinetic description of the Δ\Delta model based on the Chapman–Enskog expansion[99] by treating the synchronization-dependent injection amplitude within the mean-field closure introduced in Ref. 86. However, an important difference from Ref. 86 is that here the parameter Δij(r1,r2)\Delta_{ij}(\mathbf{r}_1,\mathbf{r}_2) for a pair of colliding particles takes into account delocalization in collisions. In other words, it accounts for the fact that the particles are located at different positions r1\mathbf{r}_1 and r2\mathbf{r}_2. This feature introduces additional complexities compared to the conventional Δ\Delta-model.[72]

The extension of the Chapman–Enskog method to dissipative dynamics has been employed in this paper to explicitly derive the expressions of Navier–Stokes transport coefficients. As usual,[100] these forms have been approximately determined by considering the leading Sonine approximations to their kinetic contributions. In spite of this sort of approximation, the forms of the transport coefficients account for inelasticity, viscous drag, finite-density effects, and synchronization. To assess the accuracy of the theoretical predictions, they are compared with event-driven molecular-dynamics (EDMD) simulations, and the limitations of the synchronization mean-field closure close to the absorbing transition are examined through the fourth velocity cumulant and collisional synchronization statistics. In general, the comparison between the theory and the simulations shows good agreement in the active branch, indicating the reliability of the kinetic theory derived here. Importantly, an overall very good agreement is obtained when the theoretical transport coefficients are evaluated using the steady granular temperature measured in the simulations. This observation supports the accuracy of the Chapman–Enskog description of transport and indicates that a significant part of the remaining discrepancies originates instead from the mean-field prediction of the homogeneous reference state, particularly from its estimate of the granular temperature. By using the simulated temperature, we largely remove this source of discrepancy, which is mainly associated with correlations and with the heterogeneous coexistence of active and inactive particle populations not explicitly represented in the present mean-field theory.

The paper is organized as follows. Section II introduces the model and its Enskog kinetic description, and Sec. III characterizes the homogeneous state. Sections IV and V develop the Chapman–Enskog expansion and derive the forms of the Navier–Stokes transport coefficients in the leading Sonine approximations. Some representative cases are considered to compare theory with simulations. Section VI discusses the main findings and future directions. Technical details of the Chapman–Enskog calculation, the origin of the deviations in the fourth cumulant, and the event-driven molecular-dynamics simulations are given in the Appendices.

Enskog kinetic theory for confined dragged granular gases with synchronization

Collision rules in the Delta-model

We consider a set of identical solid particles, modeled as two-dimensional hard disks of diameter σ\sigma and mass mm. Collisions between grains are inelastic and are characterized by a constant coefficient of normal restitution 0<α≤10 < \alpha\le1, where α=1\alpha= 1 corresponds to elastic collisions. In the context of the so-called Δ\Delta-model,[67] the z-to-xy energy-transfer mechanism is effectively represented through modified collision rules. Let us consider a collision between a particle ii and a particle jj. The relation between their respective precollisional velocities (v1,v2)(\mathbf{v}_1,\mathbf{v}_2) and their postcollisional velocities (v1′,v2′)(\mathbf{v}'_1,\mathbf{v}'_2) reads

v1′=v1−12(1+α)(σ^⋅g)σ^−Δijσ^,(1)\mathbf{v}'_1 = \mathbf{v}_1 - \frac{1}{2}(1+\alpha)(\widehat{\boldsymbol{\sigma}}\cdot\mathbf{g})\widehat{\boldsymbol{\sigma}} - \Delta_{ij}\widehat{\boldsymbol{\sigma}}, \tag*{(1)}
v2′=v2+12(1+α)(σ^⋅g)σ^+Δijσ^.(2)\mathbf{v}'_2 = \mathbf{v}_2 + \frac{1}{2}(1+\alpha)(\widehat{\boldsymbol{\sigma}}\cdot\mathbf{g})\widehat{\boldsymbol{\sigma}} + \Delta_{ij}\widehat{\boldsymbol{\sigma}}. \tag*{(2)}

Here, g=v1−v2\mathbf{g}=\mathbf{v}_1-\mathbf{v}_2 is the relative velocity, σ^\widehat{\boldsymbol{\sigma}} is the unit collision vector joining the centers of the two colliding disks and pointing from particle 1 to particle 2, and particles are approaching when σ^⋅g>0\widehat{\boldsymbol{\sigma}}\cdot\mathbf{g}>0. In Eqs. (1) and (2), Δij≥0\Delta_{ij}\geq0 is a collision-dependent non-negative velocity increment. At this stage, Δij\Delta_{ij} is deliberately left unspecified. The conventional Δ\Delta-model is recovered for Δij≡Δ\Delta_{ij}\equiv\Delta,[67] whereas the synchronization-dependent rule considered here is introduced in Sec. II B. Writing the mechanical collision rule in this general form allows the collision dynamics to be analyzed independently of the subsequent coarse-graining of the synchronization history.

The additional velocity increment is directed along the line of centers, so that the collision rule is also consistent with angular-momentum conservation.[101] The relative velocity after collision is

g′=g−(1+α)(σ^⋅g)σ^−2Δijσ^.(3)\mathbf{g}' = \mathbf{g} - (1+\alpha)(\widehat{\boldsymbol{\sigma}}\cdot\mathbf{g})\widehat{\boldsymbol{\sigma}} - 2\Delta_{ij}\widehat{\boldsymbol{\sigma}}. \tag*{(3)}

so that

σ^⋅g′=−α(σ^⋅g)−2Δij.(4)\hat{\boldsymbol{\sigma}}\cdot\mathbf{g}'=-\alpha(\hat{\boldsymbol{\sigma}}\cdot\mathbf{g})-2\Delta_{ij}. \tag*{(4)}

Momentum is conserved by Eqs. (1) and (2), whereas kinetic energy is not. The energy change in one collision is

ΔE≡m2(v1′2+v2′2−v12−v22)=m[Δij2+αΔij(σ^⋅g)−1−α24(σ^⋅g)2].(5)\Delta E \equiv\frac{m}{2}\left(v_1^{\prime2}+v_2^{\prime2}-v_1^2-v_2^2\right) = m\left[\Delta_{ij}^2+\alpha\Delta_{ij}(\hat{\boldsymbol{\sigma}}\cdot\mathbf{g})-\frac{1-\alpha^2}{4}(\hat{\boldsymbol{\sigma}}\cdot\mathbf{g})^2\right]. \tag*{(5)}

Thus, for α<1\alpha<1, energy is gained or lost depending on whether σ^⋅g\hat{\boldsymbol{\sigma}}\cdot\mathbf{g} is smaller than or larger than 2Δij/(1−α)2\Delta_{ij}/(1-\alpha), respectively. In particular, for α=1\alpha=1 and Δij=0\Delta_{ij}=0 the collision is elastic. For later use, we also introduce the restituting collision (v1′′,v2′′)→(v1,v2)(\mathbf{v}_1^{\prime\prime},\mathbf{v}_2^{\prime\prime})\to(\mathbf{v}_1,\mathbf{v}_2) with the same collision vector σ^\hat{\boldsymbol{\sigma}}:

v1′′=v1−12(1+α−1)(σ^⋅g)σ^−α−1Δijσ^,(6)\mathbf{v}_1^{\prime\prime}=\mathbf{v}_1-\frac{1}{2}(1+\alpha^{-1})(\hat{\boldsymbol{\sigma}}\cdot\mathbf{g})\hat{\boldsymbol{\sigma}}-\alpha^{-1}\Delta_{ij}\hat{\boldsymbol{\sigma}}, \tag*{(6)}
v2′′=v2+12(1+α−1)(σ^⋅g)σ^+α−1Δijσ^.(7)\mathbf{v}_2^{\prime\prime}=\mathbf{v}_2+\frac{1}{2}(1+\alpha^{-1})(\hat{\boldsymbol{\sigma}}\cdot\mathbf{g})\hat{\boldsymbol{\sigma}}+\alpha^{-1}\Delta_{ij}\hat{\boldsymbol{\sigma}}. \tag*{(7)}

For a fixed value of Δij\Delta_{ij}, which is assumed not to depend explicitly on the precollisional velocities, the corresponding velocity-space Jacobians are

dv1′dv2′=α dv1dv2,dv1′′dv2′′=α−1 dv1dv2.(8)\mathrm{d}\mathbf{v}_1'\mathrm{d}\mathbf{v}_2'=\alpha\,\mathrm{d}\mathbf{v}_1\mathrm{d}\mathbf{v}_2,\qquad\mathrm{d}\mathbf{v}_1^{\prime\prime}\mathrm{d}\mathbf{v}_2^{\prime\prime}=\alpha^{-1}\,\mathrm{d}\mathbf{v}_1\mathrm{d}\mathbf{v}_2. \tag*{(8)}

Effective synchronization-dependent Δ\Delta model

As discussed in the Introduction, a key ingredient of quasi-two-dimensional vibrated granular layers is synchronization: after a sufficiently long free flight, an isolated particle can relax toward a periodic vertical motion in phase with the vibrating plates, whereas a grain–grain collision disrupts this synchronized motion. When both colliding grains are synchronized, their vertical coordinates are nearly identical and the transfer from vertical to horizontal motion is strongly suppressed. Conversely, a collision involving at least one asynchronized particle is typically non-planar and can transfer a finite amount of energy to the horizontal degrees of freedom.

Following Ref. 86, we describe this mechanism in our purely two-dimensional model through a single synchronization time τs\tau_s. Each particle ii carries a “time since last collision” δti\delta t_i: a free flight longer than τs\tau_s “synchronizes” that particle, whereas every collision resets its clock. The microscopic collision-dependent injection amplitude is therefore taken as

Δij={Δ>0,if δti<τs or δtj<τs,0,otherwise.(9)\Delta_{ij}= \begin{cases} \Delta>0, & \text{if }\delta t_i<\tau_s\text{ or }\delta t_j<\tau_s,\\ 0, & \text{otherwise}. \end{cases} \tag*{(9)}

In the limit τs→∞\tau_s\to\infty, particles never synchronize between successive collisions and Eq. (9) reduces to the conventional Δ\Delta-model, Δij≡Δ\Delta_{ij}\equiv\Delta. As in the synchronization-dependent kinetic treatment of Ref. 86, we focus on the active branch and do not introduce an independent active-particle fraction. In the notation of that work, this amounts to setting Pa=1P_a=1. Hence, the present theory is intended to describe the synchronization-controlled active state and the mechanism associated with the discontinuous transition; the activation–inactivation population dynamics required for the continuous critical transition is not retained.

An exact kinetic description of Eq. (9) would require the joint statistics of velocities and synchronization histories. To close the theory in terms of the one-particle distribution, we first neglect correlations between these two sets of variables. Thus, for an arbitrary function h(v1,v2)h(\mathbf{v}_1,\mathbf{v}_2), we assume

⟨h(v1,v2)Δij⟩coll≃⟨h(v1,v2)⟩coll⟨Δij⟩coll,(10)\left\langle h(\mathbf{v}_1,\mathbf{v}_2)\Delta_{ij}\right\rangle_{\mathrm{coll}}\simeq\left\langle h(\mathbf{v}_1,\mathbf{v}_2)\right\rangle_{\mathrm{coll}}\left\langle\Delta_{ij}\right\rangle_{\mathrm{coll}}, \tag*{(10)}

where ⟨⋯ ⟩coll\langle\cdots\rangle_{\mathrm{coll}} denotes an average performed over all colliding pairs. We then introduce a second mean-field approximation at the level of the collision rule. Assuming statistically independent Poissonian collision histories for the two particles, and a local, quasi-stationary approximation for the collision frequency, the probability that both particles have remained collision-free for a time longer than τs\tau_s is approximated by

References

  1. [43]43 P. M. Reis, R. A. Ingale, and M. D. Shattuck, Phys. Rev. E 75, 051311 (2007).
  2. [44]44 S. Tatsumi, Y. Murayama, H. Hayakawa, and M. Sano, J. Fluid Mech. 641, 521 (2009).
  3. [45]45 I. Pagonabarraga, E. Trizac, T. P. C. van Noije, and M. H. Ernst, Phys. Rev. E 65, 011303 (2001).
  4. [46]46 D. L. Blair and A. Kudrolli, Phys. Rev. E 64, 050301 (2001).
  5. [47]47 D. L. Blair and A. Kudrolli, Phys. Rev. E 67, 041301 (2003).
  6. [48]48 G. W. Baxter and J. S. Olafsen, Nature 425, 680 (2003).
  7. [49]49 G. W. Baxter and J. S. Olafsen, Phys. Rev. Lett. 99, 028001 (2007).
  8. [50]50 V. Garzó and J. W. Dufty, Phys. Rev. E 60, 5706 (1999).
  9. [51]51 K. Feitosa and N. Menon, Phys. Rev. Lett. 88, 198301 (2002).
  10. [52]52 R. D. Wildman and D. J. Parker, Phys. Rev. Lett. 88, 064301 (2002).
  11. [53]53 A. Sarracino, D. Villamaina, G. Costantini, and A. Puglisi, Journal of Statistical Mechanics: Theory and Experiment 2010, P04013 (2010).
  12. [54]54 P. M. Reis, R. A. Ingale, and M. D. Shattuck, Phys. Rev. Lett. 98, 188301 (2007).
  13. [55]55 G. D’Anna, P. Mayor, A. Barrat, V. Loreto, and F. Nori, Nature 424, 909 (2003).
  14. [56]56 U. Marini Bettolo Marconi, A. Puglisi, L. Rondoni, and A. Vulpiani, Physics Reports 461, 111 (2008).
  15. [57]57 G. Gradenigo, A. Sarracino, D. Villamaina, and A. Puglisi, EPL 96, 14004 (2011).
  16. [58]58 A. Puglisi, A. Gnoli, G. Gradenigo, A. Sarracino, and D. Villamaina, J. Chem. Phys. 136, 014704 (2012).
  17. [59]59 S. McNamara and J.-L. Barrat, Phys. Rev. E 55, 7767 (1997).
  18. [60]60 V. Kumaran, Phys. Rev. E 57, 5660 (1998).
  19. [61]61 A. Barrat and E. Trizac, Phys. Rev. E 66, 051303 (2002).
  20. [62]62 J. J. Brey, V. Buzón, M. I. García de Soria, and P. Maynar, Entropy 19, 68 (2017).
  21. [63]63 P. Maynar, M. I. García de Soria, and J. J. Brey, J. Stat. Mech. 2019, 093205 (2019).
  22. [64]64 M. Mayo, J. C. Petit, M. I. García de Soria, and P. Maynar, J. Stat. Mech. 2023, 123208 (2023).
  23. [65]65 E. L. Grossman, T. Zhou, and E. Ben-Naim, Phys. Rev. E 55, 4200 (1997).
  24. [66]66 E. Khain and I. S. Aranson, Phys. Rev. E 84, 031308 (2011).
  25. [67]67 R. Brito, D. Risso, and R. Soto, Phys. Rev. E 87, 022209 (2013).
  26. [68]68 J. J. Brey, M. I. García de Soria, P. Maynar, and V. Buzón, Phys. Rev. E 88, 062205 (2013).
  27. [69]69 J. J. Brey, P. Maynar, M. I. García de Soria, and V. Buzón, Phys. Rev. E 89, 052209 (2014).
  28. [70]70 R. Soto, D. Risso, and R. Brito, Phys. Rev. E 90, 062204 (2014).
  29. [71]71 J. J. Brey, V. Buzón, P. Maynar, and M. I. García de Soria, Phys. Rev. E 91, 052201 (2015).
  30. [72]72 V. Garzó, R. Brito, and R. Soto, Phys. Rev. E 98, 052904 (2018).
  31. [73]73 R. Brito, R. Soto, and V. Garzó, Entropy 28, 454 (2026).
  32. [74]74 J. J. Brey, V. Buzón, M. I. García de Soria, and P. Maynar, Phys. Rev. E 93, 062907 (2016).
  33. [75]75 V. Garzó, R. Brito, and R. Soto, EPJ Web Conf. 249, 04005 (2021).
  34. [76]76 R. Brito, R. Soto, and V. Garzó, Phys. Rev. E 102, 052904 (2020).
  35. [77]77 V. Garzó, R. Brito, and R. Soto, Phys. Fluids 33, 023310 (2021).
  36. [78]78 V. Garzó, R. Brito, and R. Soto, Phys. Fluids 36, 033326 (2024).
  37. [79]79 R. Gómez González, V. Garzó, R. Brito, and R. Soto, Phys. Fluids 36, 123387 (2024).
  38. [80]80 D. González Méndez and V. Garzó, Phys. Fluids 38, 033343 (2026).
  39. [81]81 R. Maire, A. Plati, F. Smallenburg, and G. Foffi, Phys. Rev. Lett. 136, 148301 (2026).
  40. [82]Maire, R., Petrini, A., Marini Bettolo Marconi, U., & Caprini, L. (2026). The Journal of Chemical Physics. 165, (034501).
  41. [83]83 R. Maire and I. Pagonabarraga, arXiv:2607.23221 (2026), 10.48550/arXiv.2607.23221.DOI
  42. [84]84 R. Maire and I. Pagonabarraga, arXiv:2607.23223 (2026), 10.48550/arXiv.2607.23223.DOI
  43. [85]85 B. Néel, I. Rondini, A. Turzillo, N. Mujica, and R. Soto, Phys. Rev. E 89, 042206 (2014).
  44. [86]86 R. Maire, A. Plati, F. Smallenburg, and G. Foffi, J. Stat. Mech. 2025, 123206 (2025).
  45. [87]87 R. Maire, A. Plati, M. Stockinger, E. Trizac, F. Smallenburg, and G. Foffi, Phys. Rev. Lett. 132, 238202 (2024).
  46. [88]88 A. Prevost, D. A. Egolf, and J. S. Urbach, Phys. Rev. Lett. 89, 084301 (2002).
  47. [89]89 D. González Méndez, R. Gómez González, and V. Garzó, Phys. Rev. E 114, 025419 (2026).
  48. [90]90 P. Pierański, Journal de Physique 44, 573 (1983).
  49. [91]91 P. Pierański, Z. Kowalik, and M. Franaszek, Journal de Physique 46, 681 (1985).
  50. [92]92 J.-Y. Chastaing, E. Bertin, and J.-C. Géminard, American Journal of Physics 83, 518 (2015).
  51. [93]Mujica, N., & Soto, R. (2016). Environmental Applications. In Recent Advances in Fluid Dynamics with Environmental Applications (pp. 445–463).
  52. [94]94 F. Schindler, Phase behavior and perturbation response of quasi-2D driven granulates employing molecular dynamics simulations, Ph.D. thesis, Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU) (2023).
  53. [95]95 N. Rivas, S. Ponce, B. Gallet, D. Risso, R. Soto, P. Cordero, and N. Mujica, Phys. Rev. Lett. 106, 088001 (2011).
  54. [96]96 R. M. Everson, Physica D: Nonlinear Phenomena 19, 355 (1986).
  55. [97]97 A. Mehta and J. M. Luck, Phys. Rev. Lett. 65, 393 (1990).
  56. [98]98 J. M. Luck and A. Mehta, Phys. Rev. E 48, 3988 (1993).
  57. [99]Chapman, S., & Cowling, T. G. (1970). The Mathematical Theory of Non-Uniform Gases.
  58. [100]Garzó, V. (2019). Granular Gaseous Flows: A Kinetic Theory Approach to Granular Gaseous Flows. In Springer.
  59. [101]101 J. F. Lutsko, J. Chem. Phys. 120, 5634 (2004).
  60. [102]102 N. V. Brilliantov and T. Pöschel, Kinetic Theory of Granular Gases (Oxford University Press, 2004).DOI
  61. [103]103 T. P. C. van Noije and M. H. Ernst, Granular Matter 1, 57 (1998).
  62. [106]106 G. A. Bird, Molecular Gas Dynamics and the Direct Simulation Monte Carlo of Gas Flows (Clarendon, Oxford, 1994).DOI
  63. [107]107 R. Gómez González and V. Garzó, J. Stat. Mech. 2019, 093204 (2019).

Paper details

vlnc:W_ycn4vvjr
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 2

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents