betaFeedback

WorksPhysics and Astronomy

Physics in Safety and Safety in Physics: Lessons from the LHC and its Underground Experiments

Abstract

Large underground particle-physics facilities are usually discussed by separating scientific performance from the systems that make their operation safe. We develop a complementary view in which safety is treated as an intrinsic part of the physical and operational structure of an experiment. Using the LHC, ATLAS, and CMS as principal case studies, we introduce the concepts of physics in safety and safety in physics: physical laws, measurements, and models determine hazards and protective barriers, while those barriers in turn define the machine, detector, access, and intervention states in which physics can be performed. We formulate this relation through a safe operational phase space and through admissible trajectories connecting different configurations, emphasizing that safety constrains not only states but also transitions between them. The framework is applied to beam and magnet protection, cryogenic and oxygen-deficiency hazards, detector-specific risk configurations, personnel access, maintenance, and radiation protection, with particular attention to the different architectures of ATLAS and CMS. We argue that validated protection does not merely restrict scientific activity but can enlarge the domain of sustainable operation. This viewpoint provides a unified physical and operational framework for understanding safety at the LHC and for incorporating protection, maintainability, and recoverability into the design of future accelerator and underground facilities such as HL-LHC, FCC and muon collider.

Introduction

Modern high-energy physics relies on experimental infrastructures whose complexity extends far beyond the particle interactions that constitute their primary scientific target. The Large Hadron Collider (LHC) at CERN is a particularly prominent example. Its operation combines ultrarelativistic particle beams, superconducting magnets, large stores of electromagnetic and kinetic energy, cryogenic systems operating at temperatures close to absolute zero, ultra-high vacuum, high-voltage equipment, radiation fields, large underground structures, extensive ventilation and electrical networks, and experimental detectors containing many millions of individual components [1, 2]. The ATLAS [3] and CMS [4] experiments add another level of complexity through detector magnets, power-distribution systems, cooling circuits, movable detector structures, gas systems, electronics, radiation-sensitive components, and the simultaneous presence of large numbers of personnel during installation, maintenance, and shutdown activities.

Such facilities reveal a particularly close relationship between physics and safety. The same physical quantities that make frontier experiments possible also determine their characteristic hazards. Beam energy enables high-energy particle collisions, but an uncontrolled beam loss can damage accelerator components. Large electrical currents generate the magnetic fields required for beam steering and particle-momentum measurement, while the corresponding stored magnetic energy must be safely controlled during a quench or electrical failure. Cryogenic helium permits the operation of superconducting magnets, while an accidental release may generate overpressure, very low temperatures, or oxygen deficiency hazard conditions in an underground environment. Ionizing radiation is an intrinsic consequence of accelerator operation and particle interactions, while the same interaction physics determines shielding requirements, activation, dosimetry, and access conditions.

This relationship motivates the two complementary directions considered in this work, which we refer to as physics in safety and safety in physics. By physics in safety, we mean the use of physical laws, quantitative models, instrumentation, and experimental measurements to identify hazards, estimate their possible consequences, and design systems capable of preventing or mitigating them. By safety in physics, we mean the converse influence: safety requirements define conditions under which accelerators and experiments may be constructed, commissioned, accessed, maintained, and operated, and therefore form part of the boundary conditions within which experimental physics is performed.

The central premise of this paper can therefore be stated as follows: at a large underground accelerator facility, safety is neither external to physics nor merely administrative. Physical laws determine the hazards, measurements reveal the state of the system, protection systems constrain its evolution, and operational experience feeds back into improved physical and engineering models. Conversely, these safety constraints define the operational phase space within which experimental physics can be performed.

It is useful at the outset to distinguish several concepts that are sometimes grouped together under the general term “safety.” Personnel safety is concerned primarily with preventing unacceptable harm to people. Machine protection is concerned with preventing or limiting damage to the accelerator and its components. Detector and equipment protection similarly aims to prevent damage to experimental systems. Radiation protection introduces its own hierarchy of monitoring, zoning, access control, shielding, and dose limitation. Fire safety, electrical safety, cryogenic safety, and occupational safety add further, partly overlapping layers. These domains strongly interact, but their objectives and protection architectures need not be identical. For example, the LHC machine-protection system is designed to prevent damage from stored beam and magnet energy, while the LHC Access Safety System provides collective personnel protection by interlocking access conditions with the state of the accelerator [2, 5–7]. Likewise, detector safety systems may automatically protect experimental equipment without being identical to the systems responsible for personnel protection [3, 4, 8].

A useful schematic representation of the relation discussed in this paper is

physical state⟶hazard⟶risk⟶measurement⟶protection⟶operational constraint.(1)\text{physical state} \longrightarrow\text{hazard} \longrightarrow\text{risk} \longrightarrow\text{measurement} \longrightarrow\text{protection} \longrightarrow\text{operational constraint}. \tag*{(1)}

The sequence in Eq. (1) should not be interpreted as a strictly linear process. In a real accelerator complex, the different stages form a network of feedback loops. Measurements continuously update knowledge of the physical state; protection systems may modify that state; operational restrictions change the accessible machine configurations; and experience accumulated during commissioning, operation, maintenance, anomalies, and incidents can lead to revisions of both the hazard model and the associated protection strategy.

This motivates a second conceptual representation that will be used throughout this work. Let the instantaneous physical and operational state of an accelerator facility be represented schematically by a multidimensional vector

X(t)={Ebeam,Imag,Emag,T,P,CO2,H˙∗,VHV,σaccess,σdet,…},(2)\mathbf{X}(t)=\left\{E_{\mathrm{beam}}, I_{\mathrm{mag}}, E_{\mathrm{mag}}, T, P, C_{\mathrm{O}_2}, \dot{H}^{*}, V_{\mathrm{HV}}, \sigma_{\mathrm{access}}, \sigma_{\mathrm{det}}, \ldots\right\}, \tag*{(2)}

where EbeamE_{\mathrm{beam}} denotes stored beam energy, ImagI_{\mathrm{mag}} and EmagE_{\mathrm{mag}} characterize magnet currents and stored magnetic energy, TT and PP denote relevant temperatures and pressures, CO2C_{\mathrm{O}_2} is an oxygen concentration1, H˙∗\dot{H}^{*} represents an appropriate radiation dose-rate quantity, and VHVV_{\mathrm{HV}} represents high-voltage states. The variables σaccess\sigma_{\mathrm{access}} and σdet\sigma_{\mathrm{det}} denote discrete status variables describing, respectively, personnel-access conditions and the relevant detector operating configuration. The precise choice of variables is system dependent and may include many additional quantities.

One may then introduce, at a conceptual level, a safe operational phase space

Ωsafe⊂Ωphys,(3)\Omega_{\mathrm{safe}} \subset\Omega_{\mathrm{phys}}, \tag*{(3)}

where Ωphys\Omega_{\mathrm{phys}} denotes the set of physically realizable machine and experiment states, while Ωsafe\Omega_{\mathrm{safe}} denotes those states, transitions, and configurations for which the applicable protection conditions are satisfied. Safe operation may then be expressed schematically as

X(t)∈Ωsafe.(4)\mathbf{X}(t) \in\Omega_{\mathrm{safe}}. \tag*{(4)}

Approach to a relevant boundary,

X(t)→∂Ωsafe,(5)\mathbf{X}(t) \to\partial\Omega_{\mathrm{safe}}, \tag*{(5)}

may trigger preventive or protective responses such as an interlock, beam abort, power removal, magnet discharge, detector shutdown, alarm, restriction of access, or evacuation.

Equations (2)–(5) are not intended to replace the detailed hazard analyses, safety rules, or engineering specifications applicable to a real installation. In particular, safety cannot in general be reduced to independent threshold conditions on a small number of scalar variables. Dependencies between subsystems, transient conditions, common-cause failures, redundancy, procedural states, human actions, and the history of a system can all be important. The construction nevertheless provides a useful physical language for the present discussion: safety can be regarded as defining an admissible subset of a much larger space of possible physical and operational states.2

This viewpoint is especially natural for the LHC because its operating conditions are inseparable from machine protection. A stored ultrarelativistic proton beam may be described at the simplest level by

Ebeam=nbNbEp,(6)E_{\mathrm{beam}}=n_{\mathrm{b}}N_{\mathrm{b}}E_{\mathrm{p}}, \tag*{(6)}

where nbn_b is the number of bunches, NbN_b is the number of particles per bunch, and EpE_p is the energy per proton. The scientific value of the machine requires large values of these quantities, while the potential consequence of an uncontrolled loss grows with the same stored energy. Machine protection therefore does not merely protect a completed accelerator from an external hazard; it enters directly into the conditions under which beam intensity can be increased and machine operation can proceed [2].

A similar argument applies to superconducting systems. To leading order, the magnetic energy associated with an inductive circuit is

Emag=12LI2,(7)E_{\mathrm{mag}} = \frac{1}{2}LI^2, \tag*{(7)}

where LL is the relevant inductance and II the current. Large currents and stored energies are indispensable for accelerator and detector performance, but they simultaneously require quench detection, energy extraction, electrical protection, cryogenic relief, and carefully defined failure responses. Thus, the scientific and safety aspects of the system originate from the same underlying physical variables.

The LHC also provides an important historical illustration of why safety models must evolve with empirical knowledge. During powering tests on 19 September 2008, an electrical fault in sector 3–4 developed into an arc, resulting in extensive mechanical and electrical damage and the release of several tonnes of helium into the tunnel. Subsequent analysis showed that the helium flow associated with the event substantially exceeded the maximum credible incident considered in an earlier cryogenic risk analysis. The experience led to a reassessment of the relevant failure scenario, modifications to protection measures, and dedicated studies of personnel safety in the LHC underground areas [2, 9–11]. This episode is important for the present discussion not merely as an accident case study, but as an example of a more general scientific principle:

model→prediction→observation→model revision→improved protection.(8)\text{model} \to\text{prediction} \to\text{observation} \to\text{model revision} \to\text{improved protection}. \tag*{(8)}

In this sense, safety knowledge at the technological frontier contains an empirical component. The objective is, of course, not to learn primarily through damaging events, but to extract information from commissioning data, tests, simulations, operational anomalies, near misses, and incidents and to incorporate that knowledge into progressively more robust systems.

The underground environment adds another essential dimension. Restricted access and egress, the potential accumulation or displacement of gases, long transport distances, radiation zoning, fire compartments, ventilation requirements, and the presence of large experimental structures make the state of the underground infrastructure itself part of the experimental boundary conditions. A cavern or accelerator tunnel is therefore not simply a geometrical container in which physics is performed. Its ventilation, access, electrical, cryogenic, alarm, evacuation, and radiation-protection systems participate directly in defining when and how the accelerator or experiment may operate.

ATLAS and CMS provide complementary examples of this integration at the detector scale. Large experimental detectors must simultaneously achieve high efficiency, stability, precision, and availability while remaining protected against abnormal environmental and technical conditions. The distinction between detector control and detector protection is particularly instructive. A detector control system is primarily concerned with bringing subsystems into the states required for operation and physics data taking, monitoring their parameters, and coordinating their configuration. A detector safety or protection system, by contrast, must be capable of overriding normal operation when predefined hazardous conditions are detected. In ATLAS, for example, the Detector Safety System was designed as a dedicated and redundant protection layer capable of initiating automatic actions to bring detector equipment into a safe state independently of routine detector control [3, 8]. CMS employs its own hierarchy of detector-control and subsystem-protection architectures adapted to its detector design and operational requirements [12, 13]. The comparison is useful precisely because there is no requirement for different experiments to implement protection in an identical way; the relevant architecture follows from the physical system, its failure modes, and the protection objectives.

The reverse influence—safety in physics—is equally important. Accelerator and detector states cannot be chosen exclusively by asking which configuration would maximize luminosity, efficiency, or data-taking time. Beam conditions, magnet currents, detector voltages, access modes, maintenance activities, and commissioning sequences are constrained by interlocks, permits, readiness conditions, radiation levels, equipment states, and human-access requirements. These constraints can affect schedules, detector availability, commissioning strategies, and the rate at which new operating regimes are approached. It would therefore be misleading to describe safety simply as a limitation imposed on scientific activity. In a highly energetic and complex installation, the ability to establish and verify safe operating conditions is itself what makes sustained high-performance operation possible.

This observation suggests a broader interpretation of protection systems. Their purpose is not solely to react to failures. They also define trusted boundaries within which increasingly demanding scientific states can be explored.

Redundancy, interlocks, monitoring, controlled access, fail-safe design, testing, and operational procedures reduce the extent to which safety depends on an unverified assumption that every component will remain in its nominal state. In this respect, a mature protection system does not oppose scientific ambition; rather, it provides part of the technical foundation on which such ambition can be exercised repeatedly and reproducibly.

The aim of this paper is not to provide a comprehensive safety manual for CERN, nor to reproduce the detailed regulatory framework applicable to individual installations. Instead, we use the LHC and the ATLAS and CMS underground experiments as case studies for examining how physical principles, quantitative hazard models, instrumentation, engineered protection, operational rules, and human decision making become coupled in a large scientific facility. Particular attention is given to stored beam and magnetic energy, machine protection, cryogenic hazards, radiation, underground access, detector safety systems, and the feedback between operational experience and subsequent protection strategies.

The novelty of the framework proposed here is not the introduction of operational limits themselves, which are intrinsic to accelerator and detector protection, but their formulation as a coupled state-and-trajectory problem for the scientific facility as a whole. Rather than treating machine protection, detector configuration, cryogenics, infrastructure, personnel access, and intervention conditions as independent safety domains, we regard them as components of a common multidimensional operational state. Safety therefore depends not only on whether the instantaneous values of individual variables lie within acceptable limits, but also on whether their combination represents an admissible global configuration and whether the trajectory connecting two configurations remains admissible. This unified phase-space description provides a common language for machine protection, detector safety, cryogenic and environmental conditions, access control, maintenance, commissioning, and operational validation.

The discussion is organized as follows. In Sec. II, we characterize the LHC as an energetic underground physical system and identify the principal physical quantities relevant to both performance and safety. Section III develops the transition from physical variables to hazards, monitoring, protective barriers, and operational constraints. Stored beam and magnetic energy and their relation to machine protection are discussed in Sec. IV. § 1.4 considers cryogenics, helium release, oxygen-deficiency hazards, and underground personnel protection, including lessons from the 2008 sector 3–4 incident. In Sec. VI, we examine ATLAS and CMS as complementary examples of safety embedded within large detector systems. The converse problem—how safety requirements shape the actual practice of experimental physics—is addressed in § 1.6. Section VIII discusses implications for the High-Luminosity LHC and future large accelerator and underground research facilities. Our conclusions are summarized in Sec. IX.

The LHC as an energetic underground physical system

The LHC is naturally described as a particle accelerator, but from the viewpoint developed in this work it is equally useful to regard it as a spatially distributed system in which large amounts of energy are stored, transported, transformed, and ultimately dissipated under highly controlled conditions. The relevant energy reservoirs are not limited to the kinetic energy of the circulating beams. They include the magnetic energy stored in the superconducting accelerator and detector magnets, electrical energy supplied to accelerator and experimental systems, thermodynamic energy associated with the large cryogenic helium inventory, mechanical and gravitational energy associated with massive detector structures, and the energy subsequently deposited in matter through beam losses and radiation fields.

The characteristic physical scales of these systems span many orders of magnitude. Proton beams circulate over a circumference of approximately 26.7 km, while potentially damaging energy deposition may occur within millimetre- or centimetre-scale regions. Superconducting magnets extend over kilometres of accelerator lattice while individual quenches begin locally. Liquid helium is distributed around the machine, whereas an accidental release can influence the conditions within a comparatively restricted tunnel volume. The accelerator should therefore not be characterized by a single “stored energy,” but by a hierarchy of energy reservoirs, spatial distributions, characteristic release times, and couplings between subsystems.

This distinction is central to the relation between physics and safety. Large stored energy does not by itself define a hazard. The consequences of an abnormal event also depend on the rate at which the energy can be released, the volume or mass into which it is transferred, and the efficiency with which the energy reservoir couples to the affected system. Schematically, a useful set of quantities is

{Est, E˙rel, uE, ϵdep, η},(9)\left\{ E_{\mathrm{st}},\ \dot{E}_{\mathrm{rel}},\ u_E,\ \epsilon_{\mathrm{dep}},\ \eta\right\}, \tag*{(9)}

where EstE_{\mathrm{st}} denotes stored energy,

E˙rel=∣dEstdt∣(10)\dot{E}_{\mathrm{rel}} = \left| \frac{dE_{\mathrm{st}}}{dt} \right| \tag*{(10)}

characterizes an energy-release rate,

uE=EstVeff(11)u_E = \frac{E_{\mathrm{st}}}{V_{\mathrm{eff}}} \tag*{(11)}

is an effective energy density, and

ϵdep=ηEstmeff(12)\epsilon_{\mathrm{dep}} = \frac{\eta E_{\mathrm{st}}}{m_{\mathrm{eff}}} \tag*{(12)}

represents a characteristic specific energy deposition into an affected mass meffm_{\mathrm{eff}}. The factor η\eta summarizes the fraction of the available energy that can be transferred to the system under consideration. Equations (9)–(12) are not intended as a substitute for detailed accident or protection calculations. They emphasize, however, why total energy alone is an insufficient measure of the physical severity of a failure.

Geometry and distributed character of the machine

The LHC is installed in the approximately 26.7 km circumference tunnel originally constructed for LEP and is divided into eight principal sectors. Its superconducting bending and focusing systems operate in superfluid helium at approximately 1.9 K, while the principal experimental interaction regions contain large underground caverns housing ATLAS, CMS, ALICE, and LHCb [1, 14]. Two major experiments ATLAS and CMS are situated approximately 100 m below ground and constitute, in themselves, large technological infrastructures containing superconducting magnets, detector services, electrical distribution, cooling systems, gas installations, ventilation, access systems, and radiation-protection infrastructure [3, 4].

The underground geometry has direct physical consequences. Energy released in a confined environment does not propagate or dissipate as it would in an unbounded external space. Gas expansion interacts with tunnel and cavern geometry; ventilation determines transport and dilution; shielding modifies radiation fields; access shafts and galleries determine evacuation paths; and compartment boundaries can modify the propagation of smoke, pressure, and heat. The underground volume must therefore be considered part of the physical system rather than merely a passive container surrounding the accelerator.

At the same time, the longitudinal scale of the accelerator implies that the relevant energies are highly distributed. An order-10 GJ magnetic-energy inventory does not constitute a single localized 10 GJ source [1, 2]. The accelerator is divided into electrical, cryogenic, vacuum, and protection sectors, and the localization and isolation of energy reservoirs are fundamental features of the machine architecture. Safety analysis consequently requires both a global view of the facility and a local description of the physical subsystem in which an abnormal transition occurs.

Stored energy of the circulating beams

For a proton beam containing nbn_b bunches, each with NbN_b particles at energy EpE_p, the total kinetic energy stored in the circulating beam is given by Eq. (6). At the nominal LHC design point,

nb=2808,Nb≃1.15×1011,Ep=7 TeV,(13)n_b = 2808,\qquad N_b \simeq1.15 \times10^{11},\qquad E_p = 7\ \mathrm{TeV}, \tag*{(13)}

which gives

Ebeamnom≃3.62×108 J=362 MJ(14)E_{\mathrm{beam}}^{\mathrm{nom}} \simeq3.62 \times10^{8}\ \mathrm{J} = 362\ \mathrm{MJ} \tag*{(14)}

for each of the two beams [1, 2]. Equation (14) illustrates an important property of accelerator physics. The energy of an individual 7 TeV proton is only

Ep≃1.12×10−6 J,(15)E_p \simeq1.12 \times10^{-6}\ \mathrm{J}, \tag*{(15)}

but the stored beam contains of order 3×10143 \times10^{14} such particles. A microscopic energy scale per particle is therefore transformed, through particle number and beam coherence, into a macroscopic energy reservoir. The revolution period of the LHC is approximately

Trev≃89 μs.(16)T_{\mathrm{rev}} \simeq89\ \mu\mathrm{s}. \tag*{(16)}

For purposes of illustrating the relevant timescale, the ratio

Pbeam(1 turn)≡EbeamTrev(17)P_{\mathrm{beam}}^{(1\ \mathrm{turn})} \equiv\frac{E_{\mathrm{beam}}}{T_{\mathrm{rev}}} \tag*{(17)}

is approximately

Pbeam(1 turn)≃4×1012 W(18)P_{\mathrm{beam}}^{(1\ \mathrm{turn})} \simeq4 \times10^{12}\ \mathrm{W} \tag*{(18)}

at nominal beam energy. This quantity should not be interpreted as a continuous beam power: a stored circulating beam is not continuously dissipating hundreds of megajoules. Rather, it illustrates the enormous instantaneous power scale that becomes relevant if a substantial fraction of the beam is transferred to matter over a timescale comparable to one revolution.

The physical consequences of beam loss are determined more directly by energy density and energy deposition than by total beam energy alone. High-energy protons penetrating matter initiate hadronic and electromagnetic cascades, distributing energy over a volume determined by the material, beam size, impact geometry, and the hydrodynamic response of the target. Detailed calculations have shown that the nominal LHC beam is capable of causing extensive material damage if a sufficiently large fraction is lost in an uncontrolled manner [15, 16]. The need to control where beam energy is allowed to be deposited is thus a direct consequence of particle-interaction physics.

It is important for the present discussion that beam energy is also a scientific resource. Increasing particle energy, bunch population, or number of bunches enhances the accessible collision rate or physics reach, but simultaneously modifies the protection requirements. Accelerator performance and machine protection are therefore coupled already at the level of Eq. (6); they are not independent considerations added at different stages of machine operation.

Magnetic energy and the superconducting state

The second major energy reservoir is contained in the superconducting magnet system. For an inductive circuit, the stored magnetic energy is given in Eq. (7). The nominal field of the LHC main dipoles is approximately 8.33 T8.33\ \mathrm{T}, generated with a current close to 12 kA12\ \mathrm{kA}. A single main dipole stores approximately 7 MJ7\ \mathrm{MJ} at nominal conditions, while the magnetic energy associated with one LHC sector is of order

Emagsector≃1.1 GJ.(19)E_{\mathrm{mag}}^{\mathrm{sector}} \simeq1.1\ \mathrm{GJ}. \tag*{(19)}

The total magnetic-energy scale of the accelerator is consequently close to 10 GJ10\ \mathrm{GJ} [2].

These values make superconductivity itself part of the safety problem. During normal operation, the magnet windings have essentially vanishing electrical resistance. If a local region crosses the superconducting boundary and becomes resistive, a quench develops. The stored magnetic energy must then be redistributed or extracted without producing unacceptable local temperatures, voltages, mechanical stresses, or cryogenic consequences.

The electromagnetic field also generates mechanical forces. A useful local scale is provided by the magnetic energy density

uB=B22μ0,(20)u_B = \frac{B^2}{2\mu_0}, \tag*{(20)}

which has the dimensions of pressure, where μ0\mu_0 denotes the vacuum permeability. One may therefore associate a characteristic magnetic pressure

pB∼B22μ0.(21)p_B \sim\frac{B^2}{2\mu_0}. \tag*{(21)}

For B=8.33 TB = 8.33\ \mathrm{T},

pB≃2.8×107 Pa≃28 MPa.(22)p_B \simeq2.8 \times10^7\ \mathrm{Pa} \simeq28\ \mathrm{MPa}. \tag*{(22)}

The actual stresses in a magnet depend strongly on coil geometry, mechanical supports, local field distribution, and structural constraints, but Eq. (21) demonstrates why high-field magnet design is simultaneously an electromagnetic and mechanical problem.

This is another example of the two-way relation considered in this paper. The large magnetic field required by accelerator physics generates the forces and stored energies that protection systems must control, while the mechanical, cryogenic, and electrical limits of the magnet system constrain the admissible accelerator operating state.

Cryogenics as a distributed thermodynamic system

The superconducting state of the main LHC magnets requires operation in pressurized superfluid helium at approximately 1.9 K. The LHC cryogenic infrastructure is consequently a distributed thermodynamic system extending around essentially the entire accelerator circumference [17] [14]. The total helium inventory associated with LHC operation is of order 130 tonnes, although this inventory is distributed among different parts and thermodynamic states of the cryogenic system.

The safety significance of a cryogenic fluid cannot be characterized only by its low temperature. Helium undergoing depressurization and warming can expand by a very large factor. As a simple scale estimate, treating helium as an ideal gas after warming to approximately room temperature gives

VHe≃mHeRTMHeP,(23)V_{\mathrm{He}} \simeq\frac{m_{\mathrm{He}}RT}{M_{\mathrm{He}}P}, \tag*{(23)}

where MHeM_{\mathrm{He}} and RR are the molar mass and gas constant of helium, respectively. At T≃293T \simeq293 K and P≃1P \simeq1 bar,

VHe≃6.1 m3(mHe1 kg)(T293 K)(1 barP).(24)V_{\mathrm{He}} \simeq6.1\ \mathrm{m}^{3}\left(\frac{m_{\mathrm{He}}}{1\ \mathrm{kg}}\right)\left(\frac{T}{293\ \mathrm{K}}\right)\left(\frac{1\ \mathrm{bar}}{P}\right). \tag*{(24)}

This estimate is not an accident model: an actual cryogenic discharge involves transient multiphase flow, heat transfer, pressure evolution, ventilation, geometry, and non-equilibrium effects. It nevertheless illustrates why even a comparatively modest local helium inventory can displace a substantial volume of air after warming and expansion.

For the LHC operating conditions, the relevant initial state is superfluid helium at approximately 1.9 K, whose density is about ρHe II≃145 kg m−3\rho_{\mathrm{He\,II}} \simeq145\ \mathrm{kg}\,\mathrm{m}^{-3}. After vaporization and warming to approximately room temperature at atmospheric pressure, one kilogram of helium occupies a volume given by Eq. (24). The corresponding volume-expansion factor is therefore

EHe≡VHegasVHeII=ρHe IIVHegasmHe∼103.(25)\mathcal{E}_{\mathrm{He}} \equiv\frac{V_{\mathrm{He}}^{\mathrm{gas}}}{V_{\mathrm{He}}^{\mathrm{II}}} = \rho_{\mathrm{He\,II}}\frac{V_{\mathrm{He}}^{\mathrm{gas}}}{m_{\mathrm{He}}} \sim10^{3}. \tag*{(25)}

Thus, a comparatively small volume of superfluid helium can generate a gas volume approximately three orders of magnitude larger after vaporization and warming. The precise expansion factor depends on the initial thermodynamic state of the helium and on the final gas temperature and pressure; the estimate in Eq. (25) should therefore be understood as an order-of-magnitude value appropriate for safety considerations.

The physical state of the cryogenic system is therefore naturally described by several coupled quantities,

Xcryo={T,P,mHe,m˙He,xHe,Q˙,…},(26)\mathbf{X}_{\mathrm{cryo}} = \left\{T, P, m_{\mathrm{He}}, \dot{m}_{\mathrm{He}}, x_{\mathrm{He}}, \dot{Q}, \ldots\right\}, \tag*{(26)}

where m˙He\dot{m}_{\mathrm{He}} characterizes mass flow, xHex_{\mathrm{He}} may denote a local helium concentration, and Q˙\dot{Q} represents relevant heat transfer. A transition from a nominal cryogenic state to an abnormal one may then couple magnet protection, pressure relief, ventilation, oxygen concentration, and personnel access. The 2008 LHC sector 3–4 incident, discussed in detail in § 1.4, provides an important example of precisely such cross-system coupling.

Energetic systems of ATLAS and CMS

The large LHC experiments should themselves be regarded as energetic physical systems rather than passive instruments placed around the collision points. In ATLAS and CMS, magnetic fields required for momentum measurement are generated by superconducting magnet systems containing gigajoule-scale stored energies.

ATLAS employs a central solenoid together with a barrel toroid and two end-cap toroids. At nominal currents, the corresponding stored magnetic energies are approximately

EsolATLAS≃0.04 GJ,EBTATLAS≃1.08 GJ,EECTATLAS≃2×0.25 GJ,(27)E_{\mathrm{sol}}^{\mathrm{ATLAS}} \simeq0.04\ \mathrm{GJ}, \qquad E_{\mathrm{BT}}^{\mathrm{ATLAS}} \simeq1.08\ \mathrm{GJ}, \qquad E_{\mathrm{ECT}}^{\mathrm{ATLAS}} \simeq2 \times0.25\ \mathrm{GJ}, \tag*{(27)}

giving a total of approximately

EmagATLAS≃1.6 GJ(28)E_{\mathrm{mag}}^{\mathrm{ATLAS}} \simeq1.6\ \mathrm{GJ} \tag*{(28)}

for the complete superconducting magnet system [18] [3].

References

  1. [17]S. Claudet, P. Lebrun, L. Tavian, and U. Wagner, Exergy Analysis of the Cryogenic Helium Distribution System for the Large Hadron Collider (LHC), AIP Conf. Proc. 1218, 1267 (2010), cERN-ATS-2010-020.DOI
  2. [18]H. H. J. ten Kate, ATLAS Superconducting Toroids and Solenoid, IEEE Trans. Appl. Supercond. 15, 1267 (2005), on behalf of the ATLAS Collaboration.
  3. [19]S. Sklet, Safety barriers: Definition, classification, and performance, Journal of Loss Prevention in the Process Industries 19, 494 (2006).DOI
  4. [20]V. de Dianous and C. Fiévez, ARAMIS project: A more explicit demonstration of risk control through the use of bow-tie diagrams and the evaluation of safety barrier performance, Journal of Hazardous Materials 130, 220 (2006).pubmed.ncbi.nlm.nih.gov/16107301
  5. [21]R. Schmidt, Machine Protection and Interlock Systems for Circular Machines—Example for LHC, in Proceedings of the 2014 Joint International Accelerator School: Beam Loss and Accelerator Protection (CERN, Newport Beach, CA, USA, 2016) pp. 319–341, arXiv:1608.03087 [physics.acc-ph].DOI
  6. [22]T. Cartier-Michaud, A. Apollonio, G. Blarasin, B. Todd, and J. Uythoven, Data-Driven Risk Matrices for CERN’s Accelerators, in Proceedings of the 12th International Particle Accelerator Conference (IPAC’21) (JACoW Publishing, Campinas, Brazil, 2021) pp. 2260–2263, paper TUPAB325.
  7. [23]S. Kaplan and B. J. Garrick, On the Quantitative Definition of Risk, Risk Analysis 1, 11 (1981).DOI
  8. [24]T. Aven, Risk Assessment and Risk Management: Review of Recent Advances on Their Foundation, European Journal of Operational Research 253, 1 (2016).DOI
  9. [25]R. Filippini, B. Dehning, G. Gagliardi, F. Rodriguez-Mateos, R. Schmidt, B. Todd, J. Uythoven, A. Vergara-Fernández, and M. Zerlauth, Reliability Assessment of the LHC Machine Protection System, in Proceedings of the 2005 Particle Accelerator Conference (PAC 2005) (IEEE, Knoxville, TN, USA, 2005) pp. 1257–1259, cERN-LHC-Project-Report-812.DOI
  10. [26]S. Yuan, M. Yang, G. Reniers, C. Chen, and J. Wu, Safety barriers in the chemical process industries: A state-of-the-art review on their classification, assessment, and management, Safety Science 148, 105647 (2022).DOI
  11. [27]M. Rausand, Reliability of Safety-Critical Systems: Theory and Applications (John Wiley & Sons, 2014).
  12. [28]B. Puccio, A. Castañeda Serra, M. Kwiatkowski, I. Romera Ramirez, and B. Todd, The CERN Beam Interlock System: Principle and Operational Experience, in Proceedings of the 1st International Particle Accelerator Conference (IPAC’10) (Kyoto, Japan, 2010) pp. 2866–2868, cERN-ATS-2010-128, paper WEP EB073.DOI
  13. [29]W. Bartmann, R. Assmann, C. Bracco, G. Goddard, V. Kain, A. Rossi, and D. Wollmann, LHC Injection and Dump Protection, Tech. Rep. CERN-ATS-2010-028 (CERN, Geneva, 2010) contribution to the first LHC Commissioning Workshop, Evian-les-Bains, France, 2010.
  14. [30]F. J. Willeke, Reliability considerations for the operation of large accelerator user facilities, in Proceedings of the 2014 Joint International Accelerator School: Beam Loss and Accelerator Protection, CERN Yellow Reports, Vol. 2, edited by R. Schmidt (CERN, Geneva, 2016) pp. 111–136.DOI
  15. [31]B. Fernández Adiego, E. Blanco Viñuela, A. Germinario, H. Mainaud Durand, and M. Sosin, Protection layers design for the high luminosity LHC full remote alignment system, in Proceedings of the 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS’23) (2023) pp. 285–291.DOI
  16. [32]S. Redaelli, Beam Cleaning and Collimation Systems, in Proceedings of the 2014 Joint International Accelerator School: Beam Loss and Accelerator Protection (CERN, Newport Beach, CA, USA, 2016) pp. 403–437, arXiv:1608.03159 [physics.acc-ph].DOI
  17. [33]K. Dahlerup-Petersen, R. Denz, D. Milani, F. Rodríguez-Mateos, and F. Tegaenfeldt, The Quench Protection System for the LHC Test String 2, IEEE Trans. Appl. Supercond. 14, 251 (2004), cERN-LHC-PROJECT-REPORT-715.
  18. [34]T. Kramer, B. Goddard, M. Gyr, A. Koschik, J. A. Uythoven, and T. Weiler, Apertures in the LHC Beam Dump System and Beam Losses During Beam Abort, in Proceedings of the 11th European Particle Accelerator Conference (EPAC’08) (Genoa, Italy, 2008) pp. 2665–2667, paper WEPF064, CERN-LHC-PROJECT-REPORT-1161.
  19. [35]E. B. Holzer, B. Dehning, E. Effinger, J. Emery, V. Grishin, C. Hajdu, S. Jackson, C. Kurfuerst, A. Marsili, M. Misowiec, M. Nagel, E. Nebot del Busto, A. Nordt, C. Roderick, M. Sapinski, and C. Zamantzas, Beam loss monitoring for lhc machine protection, Physics Procedia 37, 2055 (2012).DOI
  20. [36]A. Lechner, P. Bélanger, I. Efthymiopoulos, L. Grob, B. Lindstrom, R. Schmidt, and D. Wollmann, Dust-induced beam losses in the cryogenic arcs of the cern large hadron collider, Phys. Rev. Accel. Beams 25, 041001 (2022), arXiv:2112.11068 [physics.acc-ph].DOI
  21. [37]H. Burkhardt, B. Goddard, and V. Mertens, Protection Devices in the Transfer Lines to the LHC, in Proceedings of the 2003 Particle Accelerator Conference (PAC 2003), Vol. 3 (IEEE, Portland, OR, USA, 2003) pp. 1721–1723, cERN-LHC-PROJECT-REPORT-641.DOI
  22. [38]V. Kain, B. Goddard, R. Schmidt, and J. Wenninger, Protection Level During Extraction, Transfer and Injection into the LHC, in Proceedings of the 2005 Particle Accelerator Conference (PAC 2005) (IEEE, Knoxville, TN, USA, 2005) pp. 1505–1507, paper RPP E016; CERN-LHC-PROJECT-REPORT-851.DOI
  23. [39]E. B. Holzer, B. Dehning, E. Effinger, J. Emery, G. Ferioli, J. L. Gonzalez, E. Gschwendtner, G. Guaglio, M. Hodgson, D. Kramer, R. Leitner, L. Ponce, V. Prieto, M. Stockner, and C. Zamantzas, Beam Loss Monitoring System for the LHC, in 2005 IEEE Nuclear Science Symposium Conference Record, Vol. 2 (IEEE, San Juan, Puerto Rico, 2005) pp. 1052–1056, cERN-AB-2006-009-BI.DOI
  24. [40]B. Dehning, Beam loss monitors at lhc, in Proceedings of the 2014 Joint International Accelerator School: Beam Loss and Accelerator Protection, CERN Yellow Reports, Vol. 2 (CERN, Geneva, 2016) pp. 303–318, arXiv:1608.03079 [physics.acc-ph].DOI
  25. [41]M. Blaszkiewicz, A. Apollonio, S. Bolton, A. Colinet, L. Felsberger, I. Romera, R. Secondo, J. Uythoven, and D. Wollmann, Reliability Studies for CERN’s New Safe Machine Parameter System, in Proceedings of the 14th International Particle Accelerator Conference (IPAC’23) (JACoW Publishing, Venice, Italy, 2023) pp. 4085–4088, paper THPA057
  26. [42]S. Bolton, M. Blaszkiewicz, A. Colinet, L. Felsberger, J. Guasch-Martinez, C. Martin, I. Romera, R. Secondo, and J. Uythoven, Development of a second-generation system for the reliable distribution of machine protection parameters, in Proceedings of the 15th International Particle Accelerator Conference (IPAC’24) (JACoW Publishing, Geneva, Switzerland, 2024) pp. 3401–3404.
  27. [43]R. A. Barlow, P. Bobbio, E. Carlier, G. Gräwer, N. Voumard, and R. Gjelsvik, The Beam Energy Tracking System of the LHC Beam Dumping System, Tech. Rep. CERN-AB-2006-006-BT (CERN, Geneva, 2006) presented at the 10th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS 2005), Geneva, Switzerland, 10–14 October 2005, paper PO2.056-4.
  28. [44]C. Bracco, M. J. Barnes, and A. Lechner, Beam injection and dumping systems, in High-Luminosity Large Hadron Collider (HL-LHC): Technical Design Report, CERN Yellow Reports: Monographs (CERN, Geneva, 2020) pp. 259–268.DOI
  29. [45]D. Carbajo Perez, A. Perillo-Marcone, E. Berthomé, C. Bertone, N. Biancacci, C. Bracco, G. Bregliozzi, B. Bulat, C. Cadiou, M. Calviani, G. Cattenoz, A. Cherif, P. Costa Pinto, A. Dallocchio, M. Di Castro, P. Fessia, M. I. Frankl, J.-F. Fuchs, H. Garcia Gavela, L. Gentini, J.-M. Geisser, S. Giordani, M. A. Gonzalez De La Asela Cabana, J.-L. Grenard, S. Joly, A. Lechner, J. Lendara, J. Maestre, E. Page, M. Perez Ornedo, D. Pugnat, E. Rigutto, R. Seidenbinder, B. Salvant, A. Sapountzis, K. Scibor, J. Sola Merino, M. Taborelli, E. Urrutia, R. Franqueira Ximenes, A. Vieille, C. Vollinger, and C. Yin Valgrgen, New generation cern lhc injection dump—assembly and installation (tdis), in Proceedings of the 12th International Particle Accelerator Conference (IPAC’21) (JACoW Publishing, 2021) pp. 3548–3551.
  30. [46]C. Wiesner, W. Bartmann, C. Bracco, E. Carlier, L. Ducimetière, M. I. Frankl, M. A. Fraser, B. Goddard, C. Heßler, T. Kramer, A. Lechner, N. Magnin, V. Senaj, and D. Wollmann, Asynchronous beam dump tests at lhc, in Proceedings of the 9th International Particle Accelerator Conference (IPAC’18) (JACoW Publishing, 2018).DOI
  31. [47]M. Chorowski, G. Konopka, and G. Riddone, Helium Discharge and Dispersion in the LHC Accelerator Tunnel in Case of Cryogenic Failure, in Proceedings of the 18th International Cryogenic Engineering Conference (ICEC 18) (Mumbai, India, 2000) pp. 231–234, cERN-LHC-Project-Report-381.
  32. [48]M. Chorowski, W. K. Erdt, G. Konopka, and G. Riddone, Oxygen Deficiency Hazard (ODH) Monitoring System in the LHC Tunnel, Tech. Rep. CERN-LHC-Project-Report-523 (CERN, Geneva, 2001).
  33. [49]S. W. V. Sciver, Helium Cryogenics, 2nd ed., International Cryogenics Monograph Series (Springer, New York, 2012).DOI
  34. [50]V. Parma and Y. Leclercq, Cryogenic safety in helium cryostats at cern, IOP Conf. Ser. Mater. Sci. Eng. 278, 012171 (2017).DOI
  35. [51]P. Cruikshank, V. Parma, A. Perin, and L. Tavian, New Protection Scheme and Pressure Relief-Valve Staging of the LHC Insulation Vacuum Enclosure Following the 19th September 2008 Incident, Tech. Rep. CERN-ATS-Note-2010-057 TECH (CERN, Geneva, 2010).
  36. [52]M. Chorowski, J. Fydrych, Z. Modlinski, J. Polinski, L. Tavian, and J. Wach, Risk Analysis Update of the LHC Cryogenic System Following the 19th September 2008 Incident, in Proceedings of the 23rd International Cryogenic Engineering Conference and International Cryogenic Materials Conference 2010 (ICEC 23–ICMC 2010) (Oficyna Wydawnicza Politechniki Wroclawskiej, Wroclaw, Poland, 2011) pp. 879–884, CERN-ATS-2011-019.
  37. [53]H. Boterenbrood, H. J. Burckhardt, J. Cook, V. Filimonov, B. Hallgren, W. Heubers, V. Khoumoutnikov, Y. Ryabov, and F. Varela, Design and implementation of the atlas detector control system, IEEE Trans. Nucl. Sci. 51, 495 (2004).DOI
  38. [54]S. Schmeling, R. B. Flockhart, S. Lüders, and G. Morpurgo, The detector safety system for lhc experiments, IEEE Trans. Nucl. Sci. 51, 521 (2004).DOI
  39. [55]J. Bremer, The Cryogenic System for the ATLAS Liquid Argon Detector, in Proceedings of the 18th International Cryogenic Engineering Conference (ICEC 18) (Mumbai, India, 2000) pp. 219–222, on behalf of the ATLAS Liquid Argon Collaboration; CERN-LHC-Project-Report-393.
  40. [56]C. Fabre, J. Bremer, M. Chalifour, G. Gonidec, G. Passardi, P. Petit, M. Pezzetti, and F. Wicek, Design Principles and Operational Results of the Cryogenic System for the ATLAS Liquid Argon Calorimeter, in Proceedings of the 22nd International Cryogenic Engineering Conference and International Cryogenic Materials Conference 2008 (ICEC 22–ICMC 2008) (Korea Institute of Applied Superconductivity and Cryogenics, Seoul, Republic of Korea, 2009) pp. 787–792.
  41. [57]B. Curé, G. Le Godec, M. Ostrega, and U. Wagner, Fifteen years of operation of the compact muon solenoid detector superconducting magnet, IEEE Trans. Appl. Supercond. 34, 1 (2024).DOI
  42. [58]ATLAS Collaboration, ATLAS data quality operations and performance for 2015–2018 data-taking, JINST 15 (04), P04003, arXiv:1911.04632 [physics.ins-det].DOI
  43. [59]N. J. Buchanan, L. Chen, D. M. Gingrich, S. Liu, H. Chen, D. Damazio, F. Densing, S. Duffin, J. Farrell, S. Kandasamy, J. Kierstead, F. Lanni, D. Lissauer, H. Ma, D. Makowiecki, T. Muller, V. Radeka, S. Rescia, R. Ruggiero, H. Takai, K. Wolniewicz, H. Ghazlane, A. Hoummada, L. Hervas, T. Hott, H. G. Wilkens, J. Ban, S. Boettcher, G. Brooijmans, C. Y. Chi, S. Caughron, M. Cooke, K. Copic, D. Dannheim, A. Gara, A. Haas, I. Katsanos, J. A. Parsons, S. Simion, W. Sippach, L. Zhang, N. Zhou, P. Eckstein, M. Kobel, E. Ladygin, E. Auge, R. Bernier, M. Bouchel, A. Bozzone, D. Breton, C. de La Taille, I. Falleau, D. Fournier, P. Imbert, G. Martin-Chassard, A. Perus, J. P. Richer, N. Seguin Moreau, L. Serin, V. Tocut, J. J. Veillet, D. Zerwas, J. Colas, N. Dumont-Dayot, N. Massol, G. Perrot, I. Wingerter-Seez, M. Escalier, F. Hubaut, B. Laforge, O. Le Dortz, P. Schmemling, J. Collot, D. Dzhahini, M. L. Gallin-Martel, P. Martin, W. D. Cwienk, J. Fent, L. Kurchaninov, M. Citterio, M. Mazzanti, F. Tartarelli, V. Bansal, C. Boulahouache, W. Cleland, B. Liu, J. McDonald, V. Paolone, J. Rabel, V. Savinov, G. Zuk, K. Benslama, P. Borgeaud, X. de La Broise, E. Delagnes, A. Le Coquie, B. F. Mansouliè, and J. Pascual, ATLAS liquid argon calorimeter front end electronics, JINST 3 (09), P09003.
  44. [60]Tracker Group of the CMS Collaboration, The CMS phase-1 pixel detector upgrade, JINST 16 (02), P02027, arXiv:2012.14304 [physics.ins-det].
  45. [61]T. Kello (CMS Collaboration), The CMS tracker performance in LHC run 3, PoS TIPP2023, 013 (2025).DOI
  46. [62]CMS Collaboration, The Phase-2 Upgrade of the CMS DAQ: Interim Technical Design Report, Tech. Rep. CERN-LHCC-2017-014, CMS-TDR-018 (CERN, Geneva, 2017).
  47. [63]ATLAS Collaboration, The ATLAS experiment at the CERN large hadron collider: a description of the detector configuration for run 3, JINST 19 (05), P05063, arXiv:2305.16623 [physics.ins-det].DOI
  48. [64]Tracker Group of the CMS Collaboration, The CMS phase-1 pixel detector upgrade, JINST 16 (02), P02027, arXiv:2012.14304 [physics.ins-det].
  49. [65]E. Butz, CMS strip detector: Operational experience and run1 to run2 transition, PoS Vertex2014, 004 (2015), on behalf of the CMS Collaboration.
  50. [66]CMS Collaboration, Mechanical stability of the CMS strip tracker measured with a laser alignment system, JINST 12 (04), P04023, arXiv:1701.02022 [physics.ins-det].
  51. [67]D. Ramos, M. Tytgat, K. Motay, K. Mota Amarilo, A. Samalan, K. Skovpen, G. A. Alves, E. Alves Coelho, F. Marujo da Silva, M. Barroso Ferreira Filho, E. M. Da Costa, D. De Jesus Damiao, B. C. Ferreira, S. Fonseca De Souza, L. Mundim, H. Nogima, J. P. Pinheiro, A. Santoro, M. Thiel, R. Gomes De Souza, A. Aleksandrov, R. Hadjiiska, P. Iaydjiev, M. Shopova, G. Sultanov, A. Dimitrov, L. Litov, B. Pavlov, P. Petkov, A. Petrov, E. Shumka, P. Cao, W. Diao, W. Gong, Q. Hou, H. Kou, Z.-A. Liu, J. Song, N. Wang, J. Zhao, S. J. Qian, C. Avila, D. A. Barbosa Trujillo, A. Cabrera, C. A. Florez, J. A. Reyes Vega, R. Aly, A. Radi, Y. Assran, I. Crotty, M. A. Mahmoud, L. Balleyguier, X. Chen, C. Combaret, G. Galbit, M. Gouzevitch, G. Grenier, I. B. Laktineh, A. Luciol, L. Mirabito, W. Tromeur, I. Bagaturia, O. Kemularia, I. Lomidze, Z. Tsamalaidze, V. Amoozegar, B. Boghrati, M. Ebrahim, F. Esfandi, Y. Hosseini, M. Mohammadi Najafabadi, E. Zareian, M. Abbrescia, N. De Filippis, G. Iaselli, F. Loddo, G. Pugliese, L. Benussi, S. Bianco, S. Meola, D. Piccolo, S. Bountempo, F. Carnevali, L. Lista, P. Paolucci, F. Fienga, A. Braghieri, P. Montagna, C. Riccardi, P. Salvini, P. Vitulo, T. J. Kim, E. Asilar, Y. Ryou, S. Choi, B. Hong, K. S. Lee, J. Goh, J. Shin, Y. Lee, I. Pedraza, C. Uribe Estrada, H. Castilla-Valdez, R. Lopez-Fernandez, A. Sanchez Hernandez, M. Ramirez Garcia, D. L. Ramirez Guadarrama, M. A. Shah, E. Vazquez, N. Zaganidis, A. Ahmad, M. I. Asghar, H. R. Hoorani, S. Muhammad, and J. Eysermans, New RPC gas mixtures for sustainable operation in the CMS experiment, Nucl. Instrum. Meth. A 1082, 170969 (2026), on behalf of the CMS Muon Group.
  52. [68]CMS Collaboration, Development of the CMS detector for the CERN LHC run 3, JINST 19 (05), P05064, arXiv:2309.05466 [physics.ins-det].DOI
  53. [69]A. Rao, CMS to improve underground fire-fighting system, CERN / CMS Experiment (2014), published 24 February 2014.
  54. [70]CERN, CERN installations are put to the test, CERN Bulletin 23/2006–24/2006, 1 (2006).
  55. [71]D. Forkel-Wirth, S. Roesler, M. Silari, M. Streit-Bianchi, C. Theis, H. Vincke, and H. Vincke, Radiation Protection at CERN, in Proceedings of the CERN Accelerator School: Course on High Power Hadron Machines (CERN, Bilbao, Spain, 2013) pp. 415–436, CERN Yellow Report CERN-2013-001; CERN Accelerator School held in Bilbao, Spain, 24 May–2 June 2011, arXiv:1303.6519 [physics.acc-ph].
  56. [72]J. D. Harrison, M. Balonov, F. Bochud, C. Martin, H.-G. Menzel, P. Ortiz-López, R. Smith-Bindman, J. R. Simmonds, and R. Wakeford, Use of dose quantities in radiological protection, Annals of the ICRP 50, 10.1177/0146645320911864 (2021), iCRP Publication 147.
  57. [73]T. Otto, ICRU report 95: New operational quantities for external radiation exposure, Annals of the ICRP 53, 74 (2024).
  58. [74]A. Fassò and S. Rokni, Operational radiation protection in high-energy physics accelerators: implementation of ALARA in design and operation of accelerators, Radiation Protection Dosimetry 137, 94 (2009).
  59. [75]N. Leveson, A new accident model for engineering safer systems, Safety Science 42, 237 (2004).DOI
  60. [76]C. Perrow, Normal Accidents: Living with High-Risk Technologies, updated ed. (Princeton University Press, Princeton, 1999).
  61. [77]N. G. Leveson, Engineering a Safer World: Systems Thinking Applied to Safety (MIT Press, Cambridge, Massachusetts, 2012).DOI
  62. [78]J. Rasmussen, Risk management in a dynamic society: A modelling problem, Safety Science 27, 183 (1997).
  63. [79]E. Hollnagel, D. D. Woods, and N. Leveson, eds., Resilience Engineering: Concepts and Precepts (Ashgate, Aldershot, 2006).
  64. [80]O. Beltramello, H. J. Burckhart, S. Franz, M. Jaekel, M. Jeckel, S. Lüders, G. Morpurgo, F. dos Santos Pedrosa, K. Pommes, and H. Sandaker, The detector safety system of the atlas experiment, Journal of Instrumentation 4, P09012.
  65. [81]C. Garino, B. Daudin, J. De Jonghe, A. Dorsival, F. B. Dos Santos Pedrosa, G. Dumont, K. Foraz, and E. Reguero Fuentes, Intervention Management from Operation to Shutdown, in Proceedings of the 4th International Particle Accelerator Conference (IPAC’13) (JACoW, Shanghai, China, 2013) pp. 3705–3707, paper THPWA035; CDS Record 2010151.
  66. [82]CERN, CERN Annual Report 2023, Annual Report of the European Organization for Nuclear Research, Vol. 69 (CERN, Geneva, 2024).DOI
  67. [83]CERN, Annual Progress Report 2024, Tech. Rep. CERN/SPC/1252/Rev., CERN/FC/6883/Rev., CERN/3886/Rev. (CERN, Geneva, 2025) approved by the CERN Council, June 2025.DOI
  68. [84]J.-P. Tock, A. Herty, A. Borglund, C. Duchemin, C. Bedel, F. Dos Santos Pedrosa, G. Riddone, J. Etheridge, J. Fernandez, M. Bernardini, M. Modena, P. Fessia, R. Steerenberg, S. Blanchard, S. Roesler, M. Vargas Jorba, and S. Marsh, The Third Long Shutdown (LS3) of the CERN Accelerator Complex, in Proceedings of the 16th International Particle Accelerator Conference (IPAC’25) (JACoW Publishing, Taipei, Taiwan, 2025) pp. 891–894, paper TUBN1.
  69. [85]S. Evrard, L. Contini, M. Dole, J. Fernandez, G. Godineau, T. Hakulinen, F. Havart, I. Krautsztrung, T. Ladziński, T. Lang, P. Martel, B. Morand, M. Munoz Codoc eo, P. Ninin, R. Nunes, G. Olivet Dessent, D. Raffourt, O. Rios, E. Sanchez-Corral Mena, and A. Suwalska, Consolidation of Personnel Safety Systems at CERN, in Proceedings of the 16th International Particle Accelerator Conference (IPAC’25) (JACOW Publishing, Taipei, Taiwan, 2025) pp. 3000–3002, paper THPSO22.DOI
  70. [86]G. Apollinari, I. Béjar Alonso, O. Brüning, P. Fessia, M. Lamont, L. Rossi, and L. Tavian, eds., High-Luminosity Large Hadron Collider (HL-LHC): Technical Design Report V. 0.1, CERN Yellow Reports: Monographs, Vol. 4/2017 (CERN, Geneva, 2017).
  71. [87]C. Adorisio, I. Béjar Alonso, J. C. Gascon, T. Otto, and S. Roesler, Safety, in High-Luminosity Large Hadron Collider (HL-LHC): Preliminary Design Report, CERN Yellow Reports No. CERN-2015-005, edited by G. Apollinari, I. Béjar Alonso, O. Brüning, M. Lamont, and L. Rossi (CERN, Geneva, 2015) pp. 249–256, arXiv:1705.09512 [physics.acc-ph].
  72. [88]M. Benedikt, F. Zimmermann, B. Auchmann, W. Bartmann, J. P. Burnet, C. Carli, A. Chancé, P. Craievich, M. Giovannozzi, C. Grojean, J. Gutleber, K. Hanke, A. Henriques, P. Janot, C. Lourenço, M. Mangano, T. Otto, J. Poole, S. Rajagopalan, T. Raubenheimer, E. Todesco, et al., Future Circular Collider Feasibility Study Report: Volume 2 Accelerators, Technical Infrastructure and Safety, Eur. Phys. J. Spec. Top. 234, 5713 (2025), CERN-FCC-ACC-2025-0004; CERN DOI 10.17181/CERN.EBAY.7W4X, arXiv:2505.00274 [physics.acc-ph].
  73. [89]International Muon Collider Collaboration, Interim Report for the International Muon Collider Collaboration, CERN Yellow Reports: Monographs, Vol. 2/2024 (CERN, Geneva, 2024) arXiv:2407.12450 [physics.acc-ph].
  74. [90]D. Wollmann, R. Denz, B. Lindström, E. Ravaioli, F. Rodríguez Mateos, A. Siemko, J. Uythoven, A. Verweij, A. Will, and M. Zerlauth, Machine Protection, in High-Luminosity Large Hadron Collider (HL-LHC): Technical Design Report, CERN Yellow Reports: Monographs, Vol. 10 (CERN, Geneva, 2020) pp. 153–168.DOI
  75. [91]S. Redaelli, R. Bruce, A. Lechner, and A. Mereghetti, Collimation System, in High-Luminosity Large Hadron Collider (HL-LHC): Technical Design Report, CERN Yellow Reports: Monographs, Vol. 10 (CERN, Geneva, 2020) pp. 87–114.
  76. [92]S. Tygier, R. B. Appleby, R. Bruce, D. Mirarchi, S. Redaelli, and A. Valloni, Performance of the Large Hadron Collider Cleaning System During the Squeeze: Simulations and Measurements, Phys. Rev. Accel. Beams 22, 023001 (2019).
  77. [93]R. Apsimon, G. Burt, A. Dexter, N. Shipman, A. Castilla, A. Macpherson, K. Ness Sjöbak, A. Santamaria Garcia, N. Stapley, A. Alekou, and R. B. Appleby, Prediction of Beam Losses During Crab Cavity Quenches at the High Luminosity LHC, Phys. Rev. Accel. Beams 22, 061001 (2019).
  78. [94]S. Claudet, G. Ferlin, E. Monneret, A. Perin, O. Pirotte, M. Sisti, and R. Van Weelderen, Cryogenics for the HL-LHC, in High-Luminosity Large Hadron Collider (HL-LHC): Technical Design Report, CERN Yellow Reports: Monographs, Vol. 10 (CERN, Geneva, 2020) pp. 189–198.
  79. [95]C. Buttar, ATLAS ITk Pixel Detector Overview, Nucl. Instrum. Meth. A 1070, 169978 (2025).DOI
  80. [96]C.-C. Kuo, CMS Inner Tracker Upgrade for the HL-LHC: Design, Development, and Production Status, Nucl. Instrum. Meth. A 1080, 170696 (2025).
  81. [97]ATLAS Collaboration, ATLAS Phase-II Upgrade Scoping Document, Tech. Rep. (CERN, 2015).
  82. [98]T. Lorenzon, D. Bozzato, R. Froeschl, and V. Kouskoura, Radiation Protection Aspects of Long Shutdown 3 at the CERN LHC Experiments: A Methodology for Residual Activation Assessments Applied to the CMS Case Study, in SATIF-15: 15th Workshop on Shielding Aspects of Accelerators, Targets and Irradiation Facilities (OECD Nuclear Energy Agency, 2024).
  83. [99]D. Bozzato, R. Froeschl, and V. Kouskoura, Operational radiation protection challenges for the lhc experiments, Radiation Protection Dosimetry 199, 785 (2023).
  84. [100]M. Brugger and S. Roesler, Remanent dose rates around the collimators of the lhc beam cleaning insertions, Radiation Protection Dosimetry 115, 470 (2005).
  85. [101]K. Kershaw, B. Feral, J.-L. Grenard, T. Feniet, S. De Man, C. Hazelaar-Bal, C. Bertone, and R. Ingo, Remote Inspection, Measurement and Handling for Maintenance and Operation at CERN, International Journal of Advanced Robotic Systems 10, 382 (2013).
  86. [102]A. Infantino, A.-P. Bernardes, M. Calviani, G. Dumont, S. El-Idrissi, R. Mouret, C. Tromel, and H. Vincke, Radiation protection challenges in the upgrade, autopsy and disposal of the lhc beam dump, Radiation Protection Dosimetry 199, 891 (2023).
  87. [103]T. Otto, C. Adorisio, C. Gaignant, A. Infantino, and M. Maietta, Safety, in High-Luminosity Large Hadron Collider (HL-LHC): Technical Design Report, CERN Yellow Reports: Monographs, Vol. 10 (CERN, Geneva, 2020) pp. 329–342.DOI
  88. [104]L. Elie, P. Dyrcz, A. Infantino, C. Tromel, and H. Vincke, Radiation Protection Challenges for the Large Hadron Collider Upgrade, Radiation Protection Dosimetry 199, 900 (2023).
  89. [105]FCC Collaboration, Future Circular Collider Feasibility Study Report: Volume 3, Civil Engineering, Implementation and Sustainability, Eur. Phys. J. Spec. Top. 234, 5113 (2025), arXiv:2505.00273 [physics.acc-ph].
  90. [106]L. Delprat, B. Newton, B. Bradu, and K. Brodzinski, Status of the FCC Cryogenics Feasibility Study, IOP Conf. Ser. Mater. Sci. Eng. 1327, 012001 (2025), proceedings of the 29th International Cryogenic Engineering Conference and International Cryogenic Materials Conference (ICEC29–ICMC2024), Geneva, Switzerland, 22–26 July 2024.
  91. [107]J. Manczak, A. Frasca, A. Lechner, C. Ah id a, D. Schulte, D. Calzolari, L. Bottura, M. Caviani, R. Franqueira Ximenes, A. Portone, C. Rogers, and F. Saura Esteban, Radiation Load Studies for the Proton Target Area of a Multi-TeV Muon Collider, in Proceedings of the 15th International Particle Accelerator Conference (IPAC2024) (JACoW Publishing, Geneva, 2024) pp. 2544–2547.
  92. [108]MICE Collaboration, Transverse Emittance Reduction in Muon Beams by Ionization Cooling, Nature Physics 20, 1558 (2024).
  93. [109]A. Lechner, A. Frasca, C. Carli, D. Schulte, D. Calzolari, D. Amorim, F. Salvat Pujol, G. Lerner, J. Manczak, J. Ferreira Somoza, K. Skoufaris, L. Bottura, P. Borges de Sousa, R. van Weelderen, B. Caiffi, and S. Mariotto, Radiation Shielding Studies for Superconducting Magnets in Multi-TeV Muon Colliders, in Proceedings of the 15th International Particle Accelerator Conference (IPAC2024) (JACoW Publishing, Geneva, 2024) pp. 2536–2539.DOI
  94. [110]D. Lucchesi, N. Bartosik, D. Calzolari, L. Castelli, and A. Lechner, Machine-Detector Interface for Multi-TeV Muon Collider, PoS EPS-HEP2023, 630 (2024).DOI
  95. [111]G. Lerner, A. Frasca, A. Lechner, C. Carli, C. Ahhida, and J. Manczak, FLUKA Simulations of Neutrino-Induced Effective Dose at a Muon Collider, in Proceedings of the 15th International Particle Accelerator Conference (IPAC2024) (JACoW Publishing, Geneva, 2024).DOI
  96. [112]M. Wied, J. Oehmen, and T. Welo, Conceptualizing resilience in engineering systems: An analysis of the literature, Systems Engineering 23, 3 (2020).DOI
  97. [113]A. Mentges, L. Halekotte, M. Schneider, T. Demmer, and D. Lichte, A resilience glossary shaped by context: Reviewing resilience-related terms for critical infrastructures, International Journal of Disaster Risk Reduction 96, 103893 (2023).DOI
  98. [114]International Atomic Energy Agency, Decommissioning of Facilities, IAEA Safety Standards Series GSR Part 6 (International Atomic Energy Agency, Vienna, 2014).
  99. [115]International Atomic Energy Agency, Decommissioning of Medical, Industrial and Research Facilities, IAEA Safety Standards Series SSG-49 (International Atomic Energy Agency, Vienna, 2019).

Paper details

vlnc:W_yjdcrqtg
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents