betaFeedback

WorksPhysics and Astronomy

Analysis of 115^{115}In ββ decay through the spectral moment method

Abstract

We analyze the 115^{115}In ββ-decay energy spectrum through the spectral moment method (SMM), previously introduced in the context of 113^{113}Cd ββ decay. The spectral moments μnμ_n are defined as averaged nthn^{\rm th} powers of the ββ particle energy, characterizing the spectrum normalization (n=0n=0) and shape (n≥1n\geq 1) above a given threshold. For 115^{115}In, we consider three independent datasets characterized by different thresholds. We also consider three nuclear model calculations with two free parameters: the ratio of axial-vector to vector couplings, r=gA/gVr=g_{\rm A}/g_{\rm V}, and the small vector-like relativistic nuclear matrix element (NME), s=ss=s-NME. By using the most recent of the three datasets, we show that the first few spectral moments can determine (r, s)(r,\, s) values in good agreement with those obtained by full-fledged experimental fits. We then work out the SMM results for the other datasets. We find that, although gAg_{\rm A} quenching is generally favored, the preferred quenching factors may differ considerably depending on the chosen experimental data and nuclear models. We discuss various issues affecting both the overall normalization and the low-energy behaviour of the measured and computed spectra, and their joint effects on the experimentally quoted half-life values. Further 115^{115}In ββ-decay data at the lowest possible energy threshold appear to be crucial to clarify these issues.

Introduction

The quest for the rare process of neutrinoless double beta decay (0νββ0\nu\beta\beta) in candidate nuclei represents the most promising approach to reveal the fundamental nature of the ν\nu field, either Majorana (ν=νˉ\nu= \bar{\nu}) or Dirac (ν≠νˉ\nu\ne\bar{\nu}); see [1] for a recent review and a vast bibliography. A worldwide experimental program is underway to push the sensitivity to 0νββ0\nu\beta\beta decay half-life values as high as ∼1028\sim10^{28} y with ton-scale detectors [1, 2].

This program is being paralleled by theoretical efforts to improve the calculations of 0νββ0\nu\beta\beta decay rates in various nuclear physics models [1, 3]. At present, such calculations are still subject to considerable theoretical uncertainties, affecting not only 0νββ0\nu\beta\beta decay searches in different isotopes, but also other (observed) weak-interaction processes such as two-neutrino double beta (2νββ2\nu\beta\beta) and single beta (β\beta) decay [4]. Benchmarking models with a variety of nuclear data and processes is crucial to improve the reliability of 0νββ0\nu\beta\beta rate calculations via a data-driven approach [5].

Among various sources of uncertainties, particular attention has been given to the possible reduction (so-called quenching) of the effective axial-vector coupling gAg_A [6, 7] with respect to its vacuum value gAvac=1.276g_A^{\mathrm{vac}} = 1.276 [8, 9]. Disparate quenching factors q=gA/gAvac<1q = g_A/g_A^{\mathrm{vac}} < 1 have been advocated to explain reduced Gamow-Teller (GT) strengths with respect to model expectations, in a number of β\beta and ββ\beta\beta decays and other weak processes—see [10] for a review. Various issues related to the nature and size of quenching (as due to physical effects or missing model ingredients) are matter of research and debate [4, 5, 10, 11, 12], and their clarification is crucial to improve 0νββ0\nu\beta\beta calculations.

From a phenomenological viewpoint, it appears useful to investigate processes particularly sensitive to gAg_A, such as highly forbidden non-unique β\beta decays. Indeed, some electron spectra of forbidden β\beta decays turn out to change very rapidly (both in normalization and in shape) around values gA∼1g_A \sim1, due to subtle cancellations among large nuclear matrix elements (NME) in various nuclear models [13]. However, in the few cases where data are available, it appears difficult to reproduce both the measured spectral shapes and their normalization with the same value of gAg_A [10].

Concerning spectral shapes alone, a well-studied example is represented by the fourth-forbidden β\beta decay of 113Cd^{113}\mathrm{Cd}, the spectrum of which was measured in detail in [14, 15] and [16]. The analysis performed in [16] constrained gAg_A via the so-called spectrum-shape method (SSM) [13, 17, 18] within three nuclear models: the microscopic interacting boson-fermion model (IBFM-2), the microscopic quasiparticle-phonon model (MQPM), and the interacting shell model (ISM). While a successful description of the 113Cd^{113}\mathrm{Cd} spectral shape was obtained for quenched values of gAg_A [16], the normalization (in terms of the decay half life t1/2t_{1/2}) was not satisfactorily reproduced for the same gAg_A. An independent approach to 113Cd^{113}\mathrm{Cd} decay has been recently carried out in [19] within the so-called realistic shell model (RSM), assuming no free parameter. In comparison with the 113Cd^{113}\mathrm{Cd} data of [14, 15], the authors of [19] obtain a reasonable RSM description of the spectral shape with unquenched gAg_A. However, the predicted normalization (in terms of 10log⁡ft10^{\log ft}) remains a factor of ∼4\sim4 away from the experimental value (see Table IV in [19]).

The problem of reproducing simultaneously the absolute normalization was tackled in the so-called “enhanced” (or revised) SSM [20, 21], by noting that the so-called small vector-like relativistic nuclear matrix element (ss-NME) played a crucial role in t1/2t_{1/2} estimates, while being quite uncertain theoretically due to fundamental limitations of theoretical models which utilize limited model spaces. Then, by taking the ss-NME as a free parameter (together with gAg_{\mathrm{A}}) in data fits, a satisfactory description of 113^{113}Cd decay in terms of both spectrum shape and t1/2t_{1/2} was achieved [22]. The enhanced SSM was also recently applied to the fourth-forbidden β\beta decay spectrum of 115^{115}In, leading to a simultaneous measurement of its half-life and spectral shape, for model-dependent fitted values of gAg_{\mathrm{A}} and ss-NME [23]. It should be noted that the recent RSM calculations of 115^{115}In decay with no free parameter, analogously to 113^{113}Cd, can describe well the measured spectral shape but not its normalization, that remains a factor ∼7.7\sim7.7 away from the data [19]. Altogether, these phenomenological results show that it is nontrivial to achieve a successful comparison of theoretical and experimental forbidden decay spectra in absolute terms. Note also that shape and normalization issues are subtly connected in any estimate of the decay half-life, that depends on exactly how the electron spectrum is extrapolated below the observational energy threshold.

In this context, it may be useful to adopt methodological simplifications in comparing data and calculations, circumventing full-fledged data fits that are amenable only to the expertise of experimental collaborations. Such fits often aim at estimating t1/2t_{1/2}, by mixing observed spectral features (above threshold) with theoretically extrapolated shapes (below threshold), while a more clear separation between data and models is desirable. A step in this direction was taken in our previous work on 113^{113}Cd decay [24] by introducing the so-called spectral moment method (SMM), briefly reviewed in the next section. The SMM exploits the property that a continuous spectrum, defined in a finite interval of its argument, can be discretized in terms of its moments μn\mu_n, namely, of the average values of the nn-th power of the argument [25, 26, 27]. The zeroth moment μ0\mu_0 defines the spectrum normalization, while μ1\mu_1 and higher moments parametrize its shape. Actually, for sufficiently smooth spectra, the basic information is contained just in the first few moments [28, 29].

As discussed in [24], by applying the SMM to the 113^{113}Cd data of [14, 15], interesting results are readily obtained by equating the experimental and theoretical values of a few spectral moments. In particular, in the planes charted by the free parameters gAg_{\mathrm{A}} and ss-NME for the various nuclear models, isolines of μ0\mu_0 correspond to ellipses, while isolines of μ1\mu_1 and higher moments correspond to hyperbolas. The intersections of these conic curves provided a simple understanding [24] of more detailed results obtained through refined data fits [22]. Moreover, since all moments are consistently defined above the experimental threshold within the SMM, no assumption about low-energy spectrum extrapolations is needed (as instead required by t1/2t_{1/2} priors). While the latter issue is not particularly relevant for the 113^{113}Cd spectrum of [14, 15] (that can be extrapolated below threshold almost “by eye”), it may be of some importance in other nuclei such as 115^{115}In, where the low-energy shape is rather uncertain, as discussed below.

In this work, we systematically apply the SMM to the 115^{115}In decay spectrum, in order to compare the most recent measurement [23] with earlier ones at different thresholds [30, 31], within the IBFM-2, MQPМ, and ISM nuclear models [17, 22]. As in [24], we assume two free parameters (gAg_{\mathrm{A}} and the ss-NME), that are determined by the intersection of two moment isolines (μ0\mu_0 and μ1\mu_1) and, to some extent, by the spread of higher moment intersections. We highlight the fact that different datasets entail noticeable normalization differences above threshold. The datasets are also compatible with different (and partly conflicting) low-energy spectral shapes, qualitatively covering all cases: from an increase, to a plateau, or even to a rapid decrease. These spectral differences, partly compensated in 115^{115}In half-life estimates for accidental reasons, emerge rather clearly within the SMM, e.g., in terms of gAg_{\mathrm{A}} and ss-NME parameter values in the various cases considered. In particular, while gAg_{\mathrm{A}} quenching is generally favored in all cases, its quantification suffers from spectral ambiguities at low energy, that remain unresolved by using the available data. Further and accurate 115^{115}In decay spectrum measurements with the lowest possible experimental threshold would be highly desirable to clarify some residual spectral issues. To our knowledge, such findings have not been discussed before in the literature.

Our work is structured as follows. In Sec. II we briefly describe the SMM introduced in [24], in order to set the notation. In Sec. III we discuss and compare the input 115^{115}In data, as taken or elaborated from the observations reported in refs. [23, 30, 31]. In Sec. IV we discuss the theoretical formalism and the parameter space of nuclear models in terms of gAg_{\mathrm{A}} and ss-NME. In Sec. V we compare in detail data and calculations in terms of the SMM. We achieve a very good understanding of the parametric results reported in [23] and a reasonable understanding of those reported in [30], while we can only roughly capture the oldest results in [31]. We also compare and discuss the normalization and shape variants emerging from the SMM analysis of different data and models, and highlight current uncertainties in the low-energy behaviour of the decay spectrum. In Sec. VI we summarize the results and discuss the perspectives of our work, also in the light of other forbidden decay spectra that might be studied via their moments.

The spectral moment method (SMM)

The β\beta-decay energy spectrum S(Te)S(T_e) corresponds to the fractional number of decays nen_e per single nucleus and per unit of time tt and of β\beta kinetic energy TeT_e, observed from a given threshold TthrT_{\rm thr} up to the maximum QQ-value:

S(Te)=d2nedt dTe,Te∈[Tthr,Q].(1)S(T_e)=\frac{d^2 n_e}{dt\,dT_e},\quad T_e\in[T_{\rm thr},Q]. \tag*{(1)}

We shall use as units [Te]=keV[T_e]=\mathrm{keV} and [t]=s[t]=\mathrm{s} (or y=3.156×107 sy=3.156\times10^7\,\mathrm{s}). For 115In{}^{115}\mathrm{In}, the endpoint is accurately measured as Q=497.489 keVQ=497.489\,\mathrm{keV} [32]. Note that in [24] we expressed SS in terms of the dimensionless total energy we=1+Te/mew_e=1+T_e/m_e, as used in theoretical calculations [13, 17]. In this work we prefer to keep the dimensional argument TeT_e for both theoretical spectra (denoted as SthS^{\mathrm{th}}) and experimental spectra (SeS^{\mathrm{e}}), in order to facilitate contact with various published data on 115In{}^{115}\mathrm{In} decay. Our results do not depend on such conventional choice.

The spectral moment method (SMM) discretizes the information contained in the continuous function S(Te)S(T_e) in terms of its moments {μn}n≥0\{\mu_n\}_{n\geq0}. The zeroth moment,

μ0=∫TthrQS(we) dTe,(2)\mu_0=\int_{T_{\rm thr}}^Q S(w_e)\,dT_e, \tag*{(2)}

represents the decay rate per nucleus above the energy threshold, fixing the spectrum normalization. The n≥1n\geq1 moments, defined as

μn=∫TthrQS(Te)Ten dTe∫TthrQS(Te) dTe(n≥1),(3)\mu_n=\frac{\int_{T_{\rm thr}}^Q S(T_e)T_e^n\,dT_e}{\int_{T_{\rm thr}}^Q S(T_e)\,dT_e}\quad(n\geq1), \tag*{(3)}

embed instead the (normalization independent) spectrum shape information above threshold. The corresponding units are [μ0]=s−1[\mu_0]=\mathrm{s}^{-1} and [μn]=keVn[\mu_n]=\mathrm{keV}^n for n≥1n\geq1. Note that in [24] the moments were defined in terms of the parameter wew_e and were thus dimensionless for n≥1n\geq1.

We remark that μ0\mu_0 corresponds to the total decay rate only for null threshold (Tthr=0T_{\rm thr}=0), in which case it provides the decay half life t1/2t_{1/2} via

Tthr=0 → μ0=ln⁡2t1/2=∫0QS(Te) dTe.(4)T_{\rm thr}=0\ \to\ \mu_0=\frac{\ln2}{t_{1/2}}=\int_0^Q S(T_e)\,dT_e. \tag*{(4)}

In general, any smooth spectrum S(Te)S(T_e) can be described by the series of its moments, {μn}n≥0\{\mu_n\}_{n\geq0} [25, 26, 27]. In practice, for sufficiently smooth shapes, the most relevant features of S(Te)S(T_e) can be captured by a truncated series with relatively small NN, {μn}0≤n≤N\{\mu_n\}_{0\leq n\leq N} [28, 29]. The comparison of experimental spectra SeS^{\mathrm{e}} with some model predictions Sth(p)S^{\mathrm{th}}(p) (where pp represents the free parameters of the model) can then be approximately reduced to the comparison of a few experimental moments {μne}0≤n≤N\{\mu_n^{\mathrm{e}}\}_{0\leq n\leq N} with the corresponding theoretical values μnth(p)\mu_n^{\mathrm{th}}(p). The essence of the SMM is the reduction of continuous spectral information to a few discrete quantities (the moments).

The SMM was applied in [24] to study the 113Cd{}^{113}\mathrm{Cd} β\beta-decay spectrum and its implications, e.g., for the quenching of gAg_A. It was shown that interesting results could be obtained already by a quantitative analysis of μ0\mu_0 and μ1\mu_1, supplemented by qualitative considerations about higher moments (up to, say, N=6N=6), without the need for refined data fits. In the following, the SSM approach will be applied to the 115In{}^{115}\mathrm{In} β\beta decay spectrum, as measured by three different experiments.

115In spectrum: Input experimental data

In this section we describe our input 115In{}^{115}\mathrm{In} spectrum data as taken or elaborated from three different datasets, dubbed as: AC24 (ACCESS 2024 results) [23], LE22 [30 results] [30], and PF79 [31 results] [31]. In these experiments, by using different techniques, the decay signals were observed above different thresholds and then processed in the data analysis. The three datasets discussed below should not be considered as official experimental data, but as our best description of the signal spectra in terms of normalization and shape, that we have been able to recover on the basis of published results, plus supplementary information when available from the collaborations.

Figure 1 shows the input energy spectra in units of decays/s/keV. By eye, the spectra show relative differences in normalization and shape, that will be compared and discussed at the end of this Section. By means of Eqs. (2) and (3), the spectra in Figure 1 are converted into experimental moments μne\mu_n^{\mathrm{e}}, as listed in Table 1. As we did in [24] for 113Cd{}^{113}\mathrm{Cd}, we have verified also for 115^{115}In that, for any practical purpose, there is no need to go beyond N=6N = 6 moments; actually, significant information can be derived just from μ0\mu_0 (spectrum area above threshold) and μ1\mu_1 (average energy).

Figure 1. 115^{115}In decay: Input energy spectra corresponding to the three independent datasets AC24 [23], LE22 [30], and PF79 [31], as used in our SMM analysis. See the text for details.

DatasetTthrT_{\mathrm{thr}} [keV]μ0e\mu_0^{e} [10−2310^{-23} s−1^{-1}]μ1e\mu_1^{e} [10210^{2} keV]μ2e\mu_2^{e} [10410^{4} keV2^{2}]μ3e\mu_3^{e} [10710^{7} keV3^{3}]μ4e\mu_4^{e} [10910^{9} keV4^{4}]μ5e\mu_5^{e} [101210^{12} keV5^{5}]μ6e\mu_6^{e} [101410^{14} keV6^{6}]t1/2t_{1/2} [101410^{14} y]Ref.
AC24803.182.436.892.177.412.669.965.26[23]
LE221602.542.798.372.689.083.2211.95.18[30]
PF7904.982.226.081.886.312.238.194.41[31]

Table 1. For each of the three datasets in Figure 1, the energy threshold and the moments μne\mu_n^{e} are reported (up to n=6n = 6). The last two columns report the decay half-life t1/2t_{1/2} as quoted by the experimental collaborations in the corresponding reference.

A final remark is in order. We are unable to quantify also the uncertainties to be attached to the spectra in Figure 1, that depend on a number of unpublished details about background modeling and subtraction, instrumental effects, and systematic errors. This detailed information is included in full-fledged data fits by the experimental collaborations but is generally not accessible to external users. In any case, as shown in [24] for 113^{113}Cd and discussed below for 115^{115}In, we can grasp various published results and reveal further implications of the decay spectra, by applying the SMM to the limited information displayed in Figure 1 and summarized in Table I, with no attempt to evaluate uncertainties for the spectra and their moments.

AC24 input dataset

Within the project “Array of Cryogenic Calorimeters to Evaluate Spectral Shape” (ACCESS) [33], a measurement of the 115^{115}In β\beta decay was performed by using 1.91 g of Indium iodide crystals and cryogenic calorimeters. The energy spectrum results were reported in [23] above a threshold Tthr=80T_{\mathrm{thr}} = 80 keV, at the best-fit point for the sum of signal plus background (see Fig. 2 therein). The main input corresponds to the background-subtracted signal histogram in that figure. We adopt a digitized version of such histogram, as well as an efficiency-corrected value of 19739 decays/mol/s for the 115^{115}In signal rate above threshold [34], fixing the zeroth moment as μ0e=3.28×10−23 s−1\mu_0^{e} = 3.28 \times10^{-23}\ \mathrm{s}^{-1} in our notation. The resulting input spectrum, named AC24 dataset, is shown in Figure 1 as a light blue histogram. The shape of the spectrum determines the higher moments μne\mu_n^{e} (n≥1n \ge1), as listed in Table I.

For completeness, in Table I we also report the 115^{115}In β\beta decay half-life value t1/2=5.26×1014t_{1/2} = 5.26 \times10^{14} y estimated in [23]. As already remarked, we do not take t1/2t_{1/2} as an experimental input, since it depends on the theoretical assumptions underlying the extrapolation below the measurement threshold.

LE22 input dataset

The 115In{}^{115}\mathrm{In} β\beta decay was measured in [30] with 10.3 g of LiInSe2_2 crystals, acting both as a source and a high-resolution bolometric detector. The signal includes resolved 115In{}^{115}\mathrm{In} events and an unresolved pile-up component. The energy spectrum results were reported in [30] at the best-fit point for the sum of signal plus background, and above a threshold Tthr=160T_{\mathrm{thr}} = 160 keV (see Figure 3 therein). Our main input corresponds, in the same figure, to the 115In{}^{115}\mathrm{In} spectrum plus the contribution of pile-up decay events (∼5.5%\sim5.5\% of the total events). Actually, we adopt a smoothed version of the published 115In{}^{115}\mathrm{In} binned spectrum [35], that we renormalize by a factor 1.055 to roughly account for pile-up effects, resulting in an overall decay event rate μ0e=2.54×10−23 s−1\mu_0^{e} = 2.54 \times10^{-23}\ {\rm s}^{-1} above threshold (our estimate). A more proper inclusion of pile-up events and of their effects on the decay rate can be performed only by the experimental collaboration through their data analysis procedure.

Figure 3. Analysis of AC24 dataset in the plane charted by the free parameters r=gA/gVr=g_A/g_V and s=s= s-NME, with isolines corresponding to the equality of theoretical and experimental moments μne=μnt\mu_n^e=\mu_n^t (up to n=6n=6). The left, middle and right panels correspond to the IBFM-2, MQPM, and ISM model, respectively. In each panel, the slanted ellipse is determined by μ0\mu_0, while the bundle of hyperbolas is determined by μ1\mu_1 and higher moments. The intersections of μ0\mu_0 and μ1\mu_1 isolines are denoted by dots. The local spread of intersections of μ0\mu_0 with higher moments would vanish for a perfect match between theoretical and experimental spectra. See the text for details.

The resulting input spectrum, named LE22 dataset, is shown in Figure 1 as an orange curve. We also report in Table I (but do not use as input for reasons stated in Sec. III A) the half-life t1/2=5.18×1014t_{1/2} = 5.18 \times10^{14} y quoted in [30].

PF79 input dataset

An older measurement of the 115In{}^{115}\mathrm{In} spectrum was performed in [31] using an Indium-loaded scintillation detector. For our purposes, the main results of that work are summarized by a polynomial fit reconstruction of the decay spectrum after background subtraction, as shown in Figure 8 therein (dotted curve). A few comments are in order. On the one hand, the endpoint Q=468.8Q = 468.8 keV estimated in [31] is 6% lower than the current value [32], indicating possible energy-scale systematics. We simply assume that the QQ-value mismatch can be corrected by an overall energy rescaling, Te→1.06×TeT_e \to1.06 \times T_e. On the other hand, the energy threshold is not explicitly mentioned in [31], although it appears to be rather low (50 keV or less, from the figures), with the polynomial spectrum almost vanishing for Te→0T_e \to0. We note that the only normalization information available in [31] is the half-life, t1/2=4.41×1014t_{1/2} = 4.41 \times10^{14} y, that is well-defined at null threshold.

Figure 8. As in Fig. 4, but for the PF79 data analysis.

In the absence of further information, we adopt as our input the polynomial spectrum reconstruction of [31] with rescaled energy, and assume in practice a vanishing threshold Tthr=0T_{\mathrm{thr}} = 0, so as to fix the zeroth moment (μ0e=ln⁡2/t1/2=4.98×10−23\mu_0^{e} = \ln2/t_{1/2} = 4.98 \times10^{-23} s). This is the only dataset where the measured half-life represents an input, as no theory-dependent extrapolation of the low-energy spectrum is required. The adopted input spectrum, dubbed as PF79, is shown in Figure 1 as a green curve. We have verified a posteriori that our PF79 results do not significantly change, by choosing nonzero thresholds up to ∼50\sim50–80 keV, and adjusting μ0e\mu_0^{e} to account for the spectrum area above threshold.

Qualitative comparison of datasets

The three spectra in Figure 1 represent independent measurements of the same 115In{}^{115}\mathrm{In} β\beta absolute decay spectrum, and in principle they should be quite similar to each other in both normalization and shape (above threshold). In practice, qualitative differences emerge already at visual inspection, as discussed below. Quantitative implications will be derived in § 5.

At a glance, the LE22 and AC24 spectra in Figure 1 appear to be in qualitative agreement, although the LE22 spectrum tends to overshoot the AC24 one at low energy, suggesting a higher decay rate of the former with respect to the latter. Modulo different sub-threshold shapes, this expectation is consistent with the smaller t1/2t_{1/2} value quoted by LE22 with respect to AC24. However, just by eye, the LE22 and AC24 spectra do not allow to reliably predict whether their sub-threshold behavior tend to be decreasing, stationary, or increasing as Te→0T_e \to0.

The PF79 data entail a decay rate noticeably higher than LE22 or AC24 at any energy. In addition, the PF79 spectrum displays a seemingly identified peak between 150 and 200 keV (not evident in AC24 or LE22 data), plus a rapid drop at low energy (not emerging in AC24 data). In terms of total decay rate (area under the spectrum), the high PF79 normalization is only partly compensated by its low-energy decrease, consistent with a quoted PF79 half-life significantly lower (roughly by −15%-15\%) than those quoted by AC24 and LE22. We emphasize that comparing half-lives alone mixes two different issues (overall normalization and low-energy shapes) that should be considered separately in each dataset, as correctly implemented in the spectral moment method.

Independent of any assumption about the low-energy behaviour, a shape-only comparison of the three spectra can be performed above the highest threshold, corresponding to Tthr=160T_{\mathrm{thr}} = 160 keV for the LE22 dataset. Figure 2 shows the comparison of the three datasets, where LE22 is the same as in Figure 1, while AC24 and PF79 are renormalized by factors 1.033 and 0.759, respectively, in order to have the same area as LE22 above threshold. The small normalization adjustment between AC24 and LE22 corroborates the noted compatibility of the two spectra, in contrast with their large normalization difference with PF79. Concerning the spectral shapes, the three renormalized spectra are in reasonable agreement above 160 keV, while below this value the PF79 spectrum shows a low-energy decrease not supported by AC24.

Figure 2. Energy spectra as in Figure 1, but with AC24 and PF79 renormalized by factors 1.033 and 0.759, respectively, so as to cover the same area as LE22 above 160 keV.

In summary, visual inspection shows relative differences in normalization and shape among the three input spectra, that might be due to possible experimental systematics. Normalization differences are relatively small between the AC24 and LE22 datasets, but they are relatively large between these data and the much older PF79 dataset. Shape differences among the three datasets are relatively small at high energy, but appear to increase at low energy. Both small and large differences will affect the comparison of data with theoretical calculations, the evaluation of their free parameters, and the implications for sub-threshold shapes and decay half-lives.

115In spectrum: Theoretical calculations and free parameters

Concerning the calculation of the theoretical 115In{}^{115}\mathrm{In} β\beta-decay spectrum St(Te)S^{t}(T_{\mathrm{e}}), we adopt the general approach discussed in [17], to which we refer the reader for details and bibliography. Here we remind that, apart from overall factors, St(Te)S^{t}(T_{\mathrm{e}}) is a sum over squares and products of linear combinations of NME, arising from a multipole expansion of the nuclear current in the formalism of Behrens and Bühring [36]. The power-series expansion results in an expression including both vector NME MKLs(m)\mathcal{M}^{(m)}_{\mathrm{KLs}} (weighted by gVg_{\mathrm{V}}) and axial-vector NME MKLs(m)\mathcal{M}^{(m)}_{\mathrm{KLs}} (weighted by gAg_{\mathrm{A}}). As a consequence, by defining the ratio

r=gAgV(5)r = \frac{g_{\mathrm{A}}}{g_{\mathrm{V}}} \tag*{(5)}

the quadratic-form structure of St(Te)S^{t}(T_{\mathrm{e}}) leads to the general expression [13, 24],

St=gV2(SVt+rSVAt+r2SAt),(6)S^{t} = g_{\mathrm{V}}^{2}\left(S^{t}_{\mathrm{V}} + rS^{t}_{\mathrm{VA}} + r^{2}S^{t}_{\mathrm{A}}\right), \tag*{(6)}

where the three spectrum terms contain vector-only (V), axial-only (A), and mixed vector and axial-vector (VA) NME contributions. As in [24], in accordance with the conserved vector current (CVC) hypothesis, we shall assume that gV=1g_{\mathrm{V}} = 1, while we shall treat rr (i.e., gAg_{\mathrm{A}}) as a free parameter. Following [17], we consider three nuclear models for quantitative calculation of the NME: the microscopic interacting boson-fermion model (IBFM-2), the microscopic quasiparticle-phonon model (MQPM) and the interacting shell model (ISM).

For fourth-forbidden unique decays there are four leading-order NME, with the dominant matrix elements being M440(0)\mathcal{M}^{(0)}_{440} and M441(0)\mathcal{M}^{(0)}_{441}, and with significantly smaller contributions coming from M431(0)\mathcal{M}^{(0)}_{431} and M541(0)\mathcal{M}^{(0)}_{541}. The power expansion at next-to-leading order results in a total of 45 NME [17] that depend on TeT_{\mathrm{e}} and powers of the nuclear radius. As discussed in detail in [13, 17], for r∼1r \sim1 the quadratic form in Eq. (6) entails delicate cancellations among large NME, that lead to large spectral variations in normalization and shape. While the experimental spectrum and half-life may be reproduced for some value of rr, it is not guaranteed that there is any value of rr which could reproduce both the half-life and spectrum simultaneously. In this context, a small NME may play a relevant role by modulating the residuals of large NME cancellations, especially if its numerical value is rather uncertain from a nuclear model viewpoint. It was realized in [20, 22, 37] that this role can be played by so-called small relativistic NME, dubbed as ss-NME in [22] and just as ss in [24] and herein, where (in units of fm3\mathrm{fm}^{3}):

s=VM431(0).(7)s = \mathcal{V}\mathcal{M}_{431}^{(0)}. \tag*{(7)}

By using both rr and ss as free parameters in detailed analyses of experimental data, simultaneous fits to both the measured spectrum shape and the inferred half-life were achieved for 113Cd^{113}\mathrm{Cd} decay in [22] and for 115In^{115}\mathrm{In} decay in [30], allowing estimates of gAg_{\mathrm{A}}-quenching effects in the two nuclei. For 113Cd^{113}\mathrm{Cd} decay, results similar to those in [22] were also obtained by applying the spectral moment method [24] to an independent dataset [14]. In general, the SMM offers a simple and useful guidance in the (r,s)(r, s) parameter space, independently of the specific nucleus or dataset, as briefly described below (see [24] for further details).

Since the (r,s)(r, s) parameters enter in the spectrum St(Te)S^{\mathrm{t}}(T_{\mathrm{e}}) up to their second power, any theoretical spectral moment μnt\mu_{n}^{\mathrm{t}} is related to quadratic forms in (r,s)(r, s) via integrals of the kind [see Eqs. (2) and (3)]:

∫TthrQSt(Te)Ten dTe=∑i+j≤2aijnrisj,(8)\int_{T_{\mathrm{thr}}}^{Q} S^{\mathrm{t}}(T_{\mathrm{e}})T_{\mathrm{e}}^{n}\,\mathrm{d}T_{\mathrm{e}} = \sum_{i+j\leq2} a_{ij}^{n}r^{i}s^{j}, \tag*{(8)}

where the coefficients aijna_{ij}^{n} (with nn being a superscript, not a power) are calculable numbers within each adopted nuclear model. The 0th0^{\mathrm{th}} moment μ0t(r,s)\mu_{0}^{\mathrm{t}}(r, s) corresponds to the above quadratic form with n=0n=0 [Eq. (2)], while the nthn^{\mathrm{th}} moment μnt(r,s)\mu_{n}^{\mathrm{t}}(r, s) for n≥1n\geq1 corresponds to a ratio of quadratic forms, with index nn at numerator and zero at denominator [Eq. (3)]. Thus, by equating the theoretical and experimental moments,

μnt(r,s)=μne(n≥0),(9)\mu_{n}^{\mathrm{t}}(r, s)=\mu_{n}^{\mathrm{e}}\quad(n\geq0), \tag*{(9)}

one gets, geometrically, conic sections in the (r,s)(r, s) plane. In particular, it turns out that for n=0n=0 the conic section is an ellipse, while for n≥1n\geq1 the conic sections form a bundle of hyperbolas [24].

In principle, perfect agreement between theory and data would correspond to a unique intersection point between the ellipse and all the hyperbolas (with sparse intersections around a secondary location) [24]. At that unique point, the theoretical and experimental spectra would coincide in both normalization (μ0\mu_{0}) and shape (μn\mu_{n} with n≥1n\geq1). In practice, since theory and data never match perfectly, each hyperbola intersects the ellipse in different points. The smaller (larger) spread of such points indicates qualitatively a better (worse) agreement between theory and data. Useful guidance about the preferred (r,s)(r, s) parameter values can thus be simply obtained by looking at the intersections of the μ0\mu_{0} ellipse with the μ1\mu_{1} hyperbola, and at the local spread of intersections with a few higher-moment hyperbolas μ2,3,…,6\mu_{2,3,\ldots,6} [24]. Note that at the intersection point(s) of μ0\mu_{0} and μ1\mu_{1}, at least the spectrum area and the average β\beta-particle energy (both defined above threshold) are matched by construction.

In the next Section, the SMM approach will be applied to the three independent 115In^{115}\mathrm{In} decay datasets previously named as AC24 [23], LE22 [30] and PF79 [31]. We shall recover various results already obtained through refined data fits in [23] and partly in [30]. In addition, we shall highlight various differences in the low-energy behavior of the spectra, that are entangled with (r,s)(r, s) and t1/2t_{1/2} estimates.

Comparison of theoretical and experimental spectra

In this Section, we compare theoretical and experimental spectra for 115In^{115}\mathrm{In} decay via the SMM. We compute theoretical spectra St(Te)S^{\mathrm{t}}(T_{\mathrm{e}}) as functions of the free parameters (r,s)(r, s) in each of the three reference nuclear models (IBFM-2, MQPM and ISM), adopting the one-body transitions densities reported in [17]. We consider the three experimental spectra Se(Te)S^{\mathrm{e}}(T_{\mathrm{e}}) for the AC24, LE22, and PF79 datasets as reported in Figure 1, together with their nominal thresholds set at Tthr=80T_{\mathrm{thr}}=80, 160 and 0 keV, respectively. For each pair (r,s)(r, s), we compute the theoretical moments μnt(r,s)\mu_{n}^{\mathrm{t}}(r, s), and equate them [via Eq. (9)] to the corresponding experimental moments μne\mu_{n}^{\mathrm{e}} reported in Table I.

In particular, by solving Eq. (9) for the first two moments (n=0,1n=0, 1), we get the (r,s)(r, s) solutions reported in Table II. In the same Table we also report, as a by-product, the theoretically estimated 115In^{115}\mathrm{In} decay half-life t1/2t_{1/2}. As already noted, the zeroth moment and the half-life contain equivalent information only for a null threshold [via Eq. (4)], so that the theoretical value of t1/2t_{1/2} is uniquely fixed by μ0e\mu_{0}^{\mathrm{e}} for PF79, while it depends on (r,s)(r, s) for AC24 and LE22. Note that in Table II, for each dataset, there are generally two degenerate (r,s)(r, s) solutions for negative and positive values of ss, corresponding to different theoretical spectra. The degeneracy may be lifted by looking at the spread of moment intersections: the smaller the spread, the better the match between theory and data, as discussed below.

DatasetModelrrsst1/2t_{1/2} [101410^{14} y]
AC24IBFM-20.961−1.125-1.1255.51
1.183+1.036+1.0365.35
MQPM0.994−0.994-0.9945.62
1.103+0.849+0.8495.12
ISM0.888−1.162-1.1625.60
0.970+1.060+1.0605.24
LE22IBFM-20.796−0.970-0.9704.93
————
MQPM0.968−0.910-0.9105.26
1.239+0.268+0.2683.92
ISM0.849−1.056-1.0565.21
1.105+0.629+0.6294.20
PF79IBFM-21.255−1.672-1.6724.41
0.808+1.769+1.7694.41
MQPM1.077−1.556-1.5564.41
0.970+1.680+1.6804.41
ISM0.987−1.704-1.7044.41
0.826+1.778+1.7784.41

Table II. For each dataset and nuclear model considered, we report the (r,s)(r,s) parameter values that solve the first two moment equations, μ0e=μ0t\mu_0^e=\mu_0^t and μ1e=μ1t\mu_1^e=\mu_1^t, for s<0s<0 and s>0s>0. We also report the corresponding theoretical half-life t1/2t_{1/2} in units of 101410^{14} y.

Comparison with AC24 data

Figure 3 shows the loci of points in the (r,s)(r,s) plane fulfilling Eq. (9) up to n=6n=6, using the experimental moments μne\mu_n^e from the AC24 dataset as reported in Table I. The left, middle and right panels correspond to the IBFM-2, MQPM, and ISM model, respectively. In each panel, the μn\mu_n isolines correspond to conic sections [24]: the elongated, slanted ellipse is determined by μ0\mu_0, while the bundle of hyperbolas is determined by μ1\mu_1 and higher moments. The intersections of μ0\mu_0 and μ1\mu_1 isolines are denoted by two dots, identifying the (r,s)(r,s) pair at positive and negative values of ss reported in Table II. In all cases, these dots correspond to quenched values of gAg_A (r<1.26r<1.26) and to values ∣s∣≃O(1)\lvert s\rvert\simeq O(1).

In the ideal case of perfect match between theory and data, all isolines should intersect in a single point, leading to a unique (r,s)(r,s) solution; conversely, any mismatch between theory and data would lead to somewhat different intersections of μ0\mu_0 and μn\mu_n (n≥2n\geq2) isolines. The local spread of such intersections provides a visual appreciation of the (dis)agreement between nuclear model calculation and AC24 data. In each panel, the solution (dot) for s>0s>0 entails a smaller spread than for s<0s<0 and is thus in better agreement with the data. For all models, the s>0s>0 solutions correspond to moderate quenching (r≃1.0r\simeq1.0–1.21.2), as compared to the s<0s<0 solutions (r≃0.9r\simeq0.9–11).

Our spectral moment method results for AC24 data are in striking agreement with those obtained in [23] through a refined fit to signal plus background, using the enhanced spectral shape method and the same nuclear models. In particular, the six (r,s)(r,s) pairs and t1/2t_{1/2} values reported in our Table II for AC24 agree within few percent with the best-fit results reported in Table II of [23] (see the “matched half life” entries therein), with a consistent preference for s>0s>0 (“positive solutions” therein). We also get a clear understanding—in terms of our moment isolines—of the graphical fit results reported in Figure 3 of [23]: in that figure, the fit to t1/2t_{1/2} leads to an elliptical allowed band (akin to our μ0\mu_0 isoline), while the pixels sampling the “shape-only” fit are scattered around two curved branches (akin to our bundle of μn\mu_n isolines for n≥1n\geq1).

The very good correspondence between our results and those in [23] shows that our SMM can capture the preferred (r,s)(r, s) values in a simple and intuitive way. However, the correspondence can never be exact, for two different reasons. On the one hand, our method has some limitations, since we cannot evaluate parameter errors, as it is possible in refined data analyses by the experimental collaborations. On the other hand, our SMM approach has the advantage of using only observable information above threshold, with no sub-threshold information as embedded in t1/2t_{1/2} (a fitted parameter in the SSM approach). Therefore, we are able to present an unbiased discussion of the low-energy behavior of the theoretical spectra, constrained only by experimental data above threshold and with no prior assumption.

Figure 4 shows the six theoretical spectra corresponding to the six AC24 entries in Table II, namely, to the six (r,s)(r, s) solutions (dots) in Figure 3, compared to our input AC24 dataset. The spectra with s<0s < 0 show clear peaks, that tend to slightly overshoot the data at intermediate energies, and to rapidly decrease below threshold. The (preferred) spectra at s>0s > 0 instead have either a moderate peak with a slight low-energy decrease (IBFM-2), or no peak at all with a noticeable low-energy increase (ISM and especially MQPM). These variants affect the (unobserved) area below threshold, that contributes to the total estimated event rate and thus to the inferred value of t1/2t_{1/2}. As far as the low-energy spectrum remains ambiguous, the estimated value of t1/2t_{1/2} also remains somewhat uncertain.

Figure 4. Comparison of the AC24 dataset with the nuclear model spectra, calculated for the same (r,s)(r, s) values as in Table II. The relative spectral differences appear to be moderate at intermediate and high energies, and more significant at low (and sub-threshold) energies. The s>0s > 0 cases are compatible with both decreasing and increasing spectral shapes below threshold.

Assuming the best-fit results from [23] (obtained for IBFM-2 at r≃1.2r \simeq1.2 and s≃1s \simeq1), the expected spectrum would correspond to the red, long-dashed curve in Figure 4, characterized by a slight low-energy decrease. Further spectral data with higher statistics and lower threshold appears necessary to disentangle this best-fit prediction from its closest model variants (MQPM and ISM at s>0s > 0), characterized by a low-energy increase.

Comparison with LE22 data

Figure 5 is constructed as Figure 3 but using LE22 data. For the IBFM-2 model, one branch of the bundle of hyperbolas lies outside the considered parameter range for rr, so that only five solutions (dots) out of six are shown in the figure and reported in Table II. (The unreported solution is also disfavored by a rather large spread of intersections, not shown.) From the reduced spread of local intersection points, a preference emerges for solutions at s<0s < 0, characterized by significant quenching, r≃0.8r \simeq0.8–11 (depending on the model). These results for LE22 data are somewhat different from those obtained for AC24 data, despite the fact the the two datasets appear to be very similar at high energy and moderately different just above the LE22 threshold (see Figure 1). This fact suggests that the determination of the rr and ss parameters is quite sensitive to detailed spectral features, especially at relatively low energies.

Figure 5. As in Fig. 3, but for the LE22 data analysis. Note the absence of a second solution in the left panel. The horizontal dotted lines correspond to ss values fixed by models. See the text for details.

This hint is confirmed by the results shown in Figure 6, that is analogous Figure 4 but using LE22 data. The worse solutions (at s>0s > 0) show shape deviations and a rapid low-energy increase, not supported by the input data. The preferred solutions at s<0s < 0 for the three models reproduce well the LE22 data, but predict a low-energy decrease of the spectrum, generally in contrast with the preferred solutions for AC24 at s>0s > 0. Only the IBFM-2 model predicts a slight low-energy decrease of the spectrum both for LE22 (at s<0s < 0) and for AC24 (at s>0s > 0), but with a normalization different by ∼10%\sim10\% as Te→0T_e \to0 (compare Figure 6 and Figure 4). Once more, we surmise that further data with the smallest possible threshold would be very useful to solve residual ambiguities, affecting the low-energy shape and the overall normalization of ¹¹⁵In spectra. A theoretical assessment of sign(ss) in the various models would also be beneficial.

Figure 6. As in Fig. 4, but for the LE22 data analysis.

The above LE22 results, obtained through the SMM by assuming two free parameters (rr, ss), are not immediately comparable with those obtained in [30]. In [30], a shape-only analysis was performed with free rr, while ss was fixed by the nuclear models at face value. In particular, for ¹¹⁵In, the IBFM-2 and ISM model provide the value s=0s = 0 (due to limitations of the restricted model space), while the MQPM model predicts a small negative value, s=−0.054s = -0.054. See also [24] for an analogous discussion of model ss-values for ¹¹³Cd, and [17] for more general considerations.

In order to perform a comparison with [30], in Figure 5 we report the fixed model values of ss as horizontal dotted lines; their intersection with the μ1\mu_1 hyperbola (with the smallest local spread of higher μn\mu_n intersections) should provide an estimate of the rr values preferred by the shape-only analysis of the LE22 data in [30]. We get r≃0.82r \simeq0.82 (IBFM-2), 0.92 (MQPM), and 0.82 (ISM), in reasonable agreement with the corresponding best-fit values quoted in [30]: 0.845 (IBFM-2), 0.936 (MQPM), and 0.830 (ISM). Figure 5 also shows that such ss-fixed intersections are quite far from the μ0\mu_0 ellipse, and thus fail to reproduce the spectrum normalization in addition to the shape, despite the fact that the rr values do not change much by taking ss fixed or free in any model. At least for the LE22 dataset, the spectrum shape

seems thus be more important than its normalization to determine the amount of gAg_A quenching. Note that LE22 has the highest nominal threshold and thus the low-energy spectrum shape is largely unprobed.

In summary, for LE22 data we can reasonably reproduce the published rr values at fixed ss [30]. For unconstrained (r,s)(r, s) our LE22 results are somewhat different from those obtained above for AC24 with lower threshold. The evaluation of the free model parameters in AC24 and LE22 data appears to be quite sensitive to shape variants. In particular, assessing whether the spectra increase or decrease at low energy would provide more robust (r,s)(r, s) estimates.

Comparison with PF79 data

Figure 7 is analogous to Figure 3 but using PF79 data. The spread of intersections of the μ0\mu_0 ellipse with higher-moment hyperbolas appears to be relatively large in general, suggesting that the theoretical spectra can only roughly match the PF79 data. The smallest spread is reached for the MQPM and ISM models at s<0s < 0.

Figure 7. As in Fig. 3, but for the PF79 data analysis.

Figure 8 confirms this guess. The MQPM and ISM models at s<0s < 0 provide the spectra with the highest peak and the most rapid decrease at low energy, in qualitative agreement with PF79 input data. However, from a quantitative viewpoint, no model is able to reproduce the peak position and the low-energy vanishing of the PF79 spectrum.

The PF79 dataset shows thus peculiar aspects with respect to the AC24 and LE22 datasets, not only in terms of model-independent differences in normalization and shape (as discussed for Figure 1), but also from the viewpoint of the model parameter estimation.

Within the scope of our work, we have been able to analyze the implications of the various AC24, LE22 and PF79 spectra in Figure 1 but, of course, we cannot trace or guess the origin of their experimental differences in normalization and shape. As a consequence, although one can safely say that all the available data and the considered models prefer r<1.276r < 1.276 and thus gAg_A quenching, more definite constraints on rr (as well as on the sign of ss) still escape precise quantification in 115In{}^{115}\mathrm{In}. Constraints on the inferred half-life values are also partly uncertain, since t1/2t_{1/2} is inversely proportional to the spectrum area, which may increase or decrease together with the (poorly understood) low-energy spectrum shape, besides depending on the overall normalization. Further spectral data might help to settle these issues.

Summary and perspectives

Measuring and understanding the energy spectra of highly forbidden non-unique β\beta decays provides an interesting window to neutrino and nuclear physics. These spectra are very sensitive to the relative weight of vector and axial-vector nuclear matrix elements, and might thus shed light on the debated issue of the effective (quenched) value of gAg_A in nuclear matter, that is relevant to 0νββ0\nu\beta\beta decay searches and other weak processes [10]. However, matching theoretical and experimental β\beta spectra appears to be a very challenging task: nuclear model results, taken at face value, may easily fail (sometimes badly) to describe either the observed spectral shape or its absolute normalization (i.e., the decay rate) above the experimental threshold in β\beta energy.

In the context of 113Cd{}^{113}\mathrm{Cd} and 115In{}^{115}\mathrm{In} fourth-forbidden β\beta decays, a good theoretical description of the experimental spectrum shape (but not of its normalization) has been obtained in nuclear models using gAg_A as the only free parameter (IBFM-2, MQPM, ISM) [16, 30] and, more recently, in a shell model without free parameters (RSM) [19]. So far, a satisfactory match of both normalization and shape has been achieved only by using two degrees of freedom [22, 23], that in our work are named as r=gA/gVr = g_A/g_V and s=ss = s-NME (the small and uncertain relativistic NME). Such nontrivial match generally requires both gAg_A quenching and ∣s∣∼O(1)|s| \sim O(1) in each of the examined nuclear models (IBFM-2, MQPM, and ISM) as derived by detailed experimental data fits [22, 23],

In a previous paper [24], we have shown how to discretize and simplify the analysis of the 113Cd{}^{113}\mathrm{Cd} spectrum in the (r,s)(r, s) parameter space, in terms of spectral moments μn\mu_n defined above the experimental threshold (spectral moment method, SMM). The zeroth moment μ0\mu_0 encodes the spectrum normalization, while higher moments encode the shape information, starting from μ1\mu_1 (the average β\beta energy). It turns out that isolines of constant μn\mu_n, as obtained by equating theoretical and experimental moments, define conic sections in the (r,s)(r, s) plane, that for a perfect data-theory match would intersect in a unique point [24]. The crossing(s) of the μ0\mu_0 ellipse with the μ1\mu_1 hyperbola, plus the local spread of μn\mu_n intersections, allow to capture more elaborate results obtained from detailed fits to 113Cd{}^{113}\mathrm{Cd} data [22].

In this work, we have applied the SMM to the analysis of the 115In{}^{115}\mathrm{In} decay spectrum within the same nuclear models (IBFM-2, MQPM, ISM) considered in [24], by using three independent 115In{}^{115}\mathrm{In} input datasets, dubbed as AC24 [23], LE22 [30], and PF79 [31] (Figure 1). These datasets, characterized by different thresholds, show some relative differences in normalization and shape (Figure 1 and Figure 2) that, not surprisingly, lead to variant results in terms of (r,s)(r, s). The analysis allows to highlight both separate and common underlying features, that should be further investigated by future measurements and possibly by more refined nuclear models. Our main findings are the following:

  • For the AC24 dataset, the SSM allows to recover, within few percent, the (r,s)(r, s) results obtained from detailed data fits with the enhanced spectrum-shape method [23], showing the usefulness and simplicity of our approach (Figure 3). For the preferred (r,s)(r, s) values at s>0s > 0, the sub-threshold behavior of the spectrum is expected to be either increasing or slightly decreasing (Figure 4).

  • For the LE22 dataset, the SMM allows to reasonably recover the same rr values as from full data fits at fixed ss [30]. For free ss, the preferred rr values are somewhat different from those of AC24, and s<0s < 0 is favored (Figure 5). The sub-threshold spectrum shape for s<0s < 0 is expected to be generally decreasing (Figure 6).

  • For the PF79 data analysis (Figure 7), we can recover only roughly the main features of the input spectrum, namely, the peak at intermediate energy and the rapid drop at low energy, especially for s<0s < 0 (Figure 8).

  • In any model (IBFM-2, MQPM, ISM) it appears that gAg_A quenching (r<1.276r < 1.276) is generally needed to match the spectrum normalization and shape for any input dataset (AC24, LE22, PF79). However, there is still large scatter in the admissible (r,s)(r, s) values for different data or models, with rr ranging between ∼0.8\sim0.8 and ∼1.2\sim1.2, and ss flipping between ±O(1)\pm O(1).

  • There is also ambiguity in the low-energy behavior of the spectrum, that may be increasing, stationary or decreasing in various nuclear model descriptions of different data for variable (r,s)(r, s). Cases with s>0s > 0 (s<0s < 0) appear to be generally associated to an increase (decrease) of the spectra at low energy. Stabilizing the sign

(and size) of ss would lead to more definite indications on rr, since both parameters are strongly correlated along the moment isolines.

  • The inferred half-life t1/2t_{1/2}, being inversely proportional to the total spectrum area, is affected by both normalization and shape issues. The poorly known behavior of the spectrum at low energy affects the area and thus also t1/2t_{1/2}. We note that, at present, independent experimental estimates of t1/2t_{1/2} in the AC24, LE22, and PF79 datasets imply somewhat different sub-threshold extrapolations, and thus should not be statistically averaged in principle.

  • A better understanding of current spectral differences and variants, together with their implications for allowed (r,s)(r, s) values, low-energy spectral shapes, and half-life estimates in various nuclear models, would greatly benefit from further decay data at the lowest possible experimental threshold.

We hope that our SMM findings may promote further research on 115In^{115}\mathrm{In} β\beta decay and on other gAg_A-sensitive decays or weak processes. Concerning 115In^{115}\mathrm{In} decay, we understand that a reanalysis of acquired AC24 data (or a further run with new data) in the ACCESS experiment, pushing the threshold below 80 keV, is under consideration [34]. Concerning other processes, of particular interest is the spectrum of second-forbidden β\beta decay of 99Tc^{99}\mathrm{Tc}, that has been recently measured with high accuracy at low threshold in [38], and whose implications for quenched, unquenched, or even enhanced values of gAg_A are being actively investigated [19, 38, 39, 40]. New measurements of forbidden decay spectra with a silicon drift detector technique are also being planned [41]. From a theoretical viewpoint, it is hoped that the challenges set by the experimental results may also promote improved (or new) approaches to nuclear models, possibly leading to a closer match with data and to a better interpretation of the model parameter values. We think that the simplicity of the spectral moment method, applied in [24] to 113Cd^{113}\mathrm{Cd} and herein to 115In^{115}\mathrm{In} decay, may provide useful insights also in phenomenological analyses of 99Tc^{99}\mathrm{Tc} decay and other weak-interaction spectra.

Acknowledgments

The authors are grateful to Lorenzo Pagnanini and Stefano Ghislandi, and to Alexander Leder, for very useful communications about the AC24 and LE22 datasets, respectively. The work of E.L. and A.M. was partially supported by the research grant number 2022E2J4RK “PANTHEON: Perspectives in Astroparticle and Neutrino THEory with Old and New messengers,” under the program PRIN 2022 funded by the Italian Ministero dell’Università e della Ricerca (MUR) and by the European Union – Next Generation EU, as well as by the Theoretical Astroparticle Physics (TAsP) initiative of the Istituto Nazionale di Fisica Nucleare (INFN).

References

References

  1. [1]M. Agostini, G. Benato, J. A. Detwiler, J. Menéndez and F. Vissani, “Toward the discovery of matter creation with neutrinoless ββ decay,” Rev. Mod. Phys. 95, no.2, 025002 (2023) [arXiv:2202.01787 [hep-ex]].DOI
  2. [2]C. Adams, K. Alfonso, C. Andreoiu, E. Angelico, I. J. Arnquist, J. A. A. Asaadi, F. T. Avignone, S. N. Axani, A. S. Barabash and P. S. Barbeau, et al. “Neutrinoless Double Beta Decay,” [arXiv:2212.11099 [nucl-ex]].
  3. [3]V. Cirigliano, Z. Davoudi, W. Dekens, J. de Vries, J. Engel, X. Feng, J. Gehrlein, M. L. Graesser, L. Gráf and H. Hergert, et al. “Neutrinoless Double-Beta Decay: A Roadmap for Matching Theory to Experiment,” [arXiv:2203.12169 [hep-ph]].arxiv.org/abs/2203.12169
  4. [4]H. Ejiri, J. Suhonen and K. Zuber, “Neutrino–nuclear responses for astro-neutrinos, single beta decays and double beta decays,” Phys. Rept. 797, 1-102 (2019)DOI
  5. [5]V. Cirigliano, Z. Davoudi, J. Engel, R. J. Furnstahl, G. Hagen, U. Heinz, H. Hergert, M. Horoi, C. W. Johnson and A. Lovato, et al. “Towards precise and accurate calculations of neutrinoless double-beta decay,” J. Phys. G 49, no.12, 120502 (2022) [arXiv:2207.08085 [nucl-th]].
  6. [6]J. Suhonen and J. Kostensalo, “Double β Decay and the Axial Strength,” Front. in Phys. 7, 29 (2019)DOI
  7. [7]J. Barea, J. Kotila and F. Iachello, “Nuclear matrix elements for double-β decay,” Phys. Rev. C 87, no.1, 014315 (2013) [arXiv:1301.4203 [nucl-th]].DOI
  8. [8]J. Liu et al. [UCNA], “Determination of the Axial-Vector Weak Coupling Constant with Ultracold Neutrons,” Phys. Rev. Lett. 105, 181803 (2010) [arXiv:1007.3790 [nucl-ex]].DOI
  9. [9]D. Mund, B. Maerkisch, M. Deissenroth, J. Krempel, M. Schumann, H. Abele, A. Petoukhov and T. Soldner, “Determination of the Weak Axial Vector Coupling λ = g_A/g_V from a Measurement of the β-Asymmetry Parameter A in Neutron Beta Decay,” Phys. Rev. Lett. 110, 172502 (2013) [arXiv:1204.0013 [hep-ex]].DOI
  10. [10]J. T. Suhonen, “Value of the Axial-Vector Coupling Strength in β and ββ Decays: A Review,” Front. in Phys. 5, 55 (2017) [arXiv:1712.01565 [nucl-th]].DOI
  11. [11]H. Ejiri, “Nuclear Matrix Elements for β and ββ Decays and Quenching of the Weak Coupling g_A in QRPA,” Front. in Phys. 7, 30 (2019)DOI
  12. [12]P. Gysbers, G. Hagen, J. D. Holt, G. R. Jansen, T. D. Morris, P. Navrátil, T. Papenbrock, S. Quaglioni, A. Schwenk and S. R. Stroberg, et al. “Discrepancy between experimental and theoretical β-decay rates resolved from first principles,” Nature Phys. 15, no.5, 428-431 (2019) [arXiv:1903.00047 [nucl-th]].DOI
  13. [13]M. Haaranen, P. C. Srivastava and J. Suhonen, “Forbidden nonunique β decays and effective values of weak coupling constants,” Phys. Rev. C 93, no.3, 034308 (2016)DOI
  14. [14]P. Belli, R. Bernabei, N. Bukilic, F. Cappella, R. Cerulli, C. J. Dai, F. A. Danevich, J. R. d. Laeter, A. Incicchitti and V. V. Kobychev, et al. “Investigation of β decay of 113Cd,” Phys. Rev. C 76, 064603 (2007)
  15. [15]P. Belli, R. Bernabei, F. A. Danevich, A. Incicchitti and V. I. Tretyak, “Experimental searches for rare alpha and beta decays,” Eur. Phys. J. A 55, no.8, 140 (2019) [arXiv:1908.11458 [nucl-ex]].DOI
  16. [16]L. Bodenstein-Dresler et al. [COBRA], “Quenching of gA deduced from the β-spectrum shape of 113Cd measured with the COBRA experiment,” Phys. Lett. B 800, 135092 (2020) [arXiv:1806.02254 [nucl-ex]].
  17. [17]M. Haaranen, J. Kotila and J. Suhonen, “Spectrum-shape method and the next-to-leading-order terms of the β-decay shape factor,” Phys. Rev. C 95, no.2, 024327 (2017)DOI
  18. [18]J. Kostensalo, M. Haaranen and J. Suhonen, “Electron spectra in forbidden β decays and the quenching of the weak axial-vector coupling constant gA,” Phys. Rev. C 95, no.4, 044313 (2017)DOI
  19. [19]G. De Gregorio, R. Mancino, L. Coraggio and N. Itaco, “Study of forbidden β decays within the realistic shell model,” [arXiv:2403.02272 [nucl-th]].arxiv.org/abs/2403.02272
  20. [20]A. Kumar, P. C. Srivastava, J. Kostensalo and J. Suhonen, “Second-forbidden nonunique β-decays of 24Na and 36Cl assessed by the nuclear shell model,” Phys. Rev. C 101, no.6, 064304 (2020) [arXiv:2007.08122 [nucl-th]].DOI
  21. [21]A. Kumar, P. C. Srivastava and J. Suhonen, “Second-forbidden nonunique β− decays of 59,60Fe: possible candidates for gA sensitive electron spectral-shape measurements,” Eur. Phys. J. A 57, no.7, 225 (2021) [arXiv:2101.03046 [nucl-th]].DOI
  22. [22]J. Kostensalo, J. Suhonen, J. Volkmer, S. Zatschler and K. Zuber, “Confirmation of gA quenching using the revised spectrum-shape method for the analysis of the 113Cd β-decay as measured with the COBRA demonstrator,” Phys. Lett. B 822, 136652 (2021) [arXiv:2011.11061 [nucl-ex]].DOI
  23. [23]L. Pagnanini, G. Benato, P. Carniti, E. Celi, D. Chiesa, J. Corbett, I. Dafinei, S. Di Domizio, P. Di Stefano and S. Ghislandi, et al. “Simultaneous Measurement of Half-Life and Spectral Shape of 115In β-decay with an Indium Iodide Cryogenic Calorimeter,” [arXiv:2401.16059 [nucl-ex]].
  24. [24]J. Kostensalo, E. Lisi, A. Marrone and J. Suhonen, “113Cd β-decay spectrum and gA quenching using spectral moments,” Phys. Rev. C 107, no.5, 055502 (2023) [arXiv:2302.07048 [nucl-th]].
  25. [25]W. Feller, An Introduction to Probability Theory and Its Applications, Volume II (Wiley, 2nd edition, 1991), 704 pages.
  26. [26]J. A. Shohat and J. D. Tamarkin, The Problem of Moments, Mathematical Surveys and Monographs, Volume I (American Society of Mathematics, 1970), 144 pages.
  27. [27]K. Schmüdgen, The Moment Problem, Graduate Texts in Mathematics (Springer International Publishing, 2017), 548 pages.DOI
  28. [28]N. I. Akhiezer, The Classical Moment Problem: And Some Related Questions in Analysis (Dover Publ., 2020), 253 pages.DOI
  29. [29]G. Talenti, “Recovering a function from a finite number of moments,” Inverse Problems 3, 501 (1987).DOI
  30. [30]A. F. Leder, D. Mayer, J. L. Ouellet, F. A. Danevich, L. Dumoulin, A. Giuliani, J. Kostensalo, J. Kotila, P. de Marcillac and C. Nones, et al. “Determining gA/gV with High-Resolution Spectral Measurements Using a LiInSe2 Bolometer,” Phys. Rev. Lett. 129, no.23, 232502 (2022) [arXiv:2206.06559 [nucl-ex]].
  31. [31]L. Pfeiffer, A. P. Mills, E. A. Chandross and T. G. Kovacs, “Beta spectrum of In-115,” Phys. Rev. C 19, 1035-1041 (1979)
  32. [32]J. Blachot, “Nuclear Data Sheets for A = 115,” Nucl. Data Sheets 113, 2391-2535 (2012)
  33. [33]L. Pagnanini et al. [ACCESS], “Array of cryogenic calorimeters to evaluate the spectral shape of forbidden β-decays: the ACCESS project,” Eur. Phys. J. Plus 138, no.5, 445 (2023) [arXiv:2305.01949 [physics.ins-det]].DOI
  34. [34]Private communication from L. Pagnanini and S. Ghislandi.
  35. [35]Private communication from A. Leder.
  36. [36]H. Behrens and W. Bühring, “Electron Radial Wave Functions and Nuclear Beta-decay” (Clarendon Press, 1982), 626 pages.
  37. [37]O. S. Kirsebom, S. Jones, D. F. Strömberg, G. Martínez-Pinedo, K. Langanke, F. K. Röpke, B. A. Brown, T. Eronen, H. O. U. Fynbo and M. Hukkanen, et al. “Discovery of an Exceptionally Strong β-decay Transition of 20F and Implications for the Fate of Intermediate-Mass Stars,” Phys. Rev. Lett. 123, no.26, 262701 (2019) [arXiv:1905.09407 [astro-ph.SR]].DOI
  38. [38]M. Paulsen, P. Ranitzsch, M. Loidl, M. Rodrigues, K. Kossert, X. Mougeot, A. Singh, S. Leblond, J. Beyer and L. Bockhorn, et al. “High precision measurement of the 99Tc β spectrum,” [arXiv:2309.14014 [nucl-ex]].
  39. [39]M. Ramalho and J. Suhonen, “Shell-model treatment of the β decay of 99Tc,” [arXiv:2312.07448 [nucl-th]].
  40. [40]M. Ramalho and J. Suhonen, “gA-sensitive β spectral shapes in the mass A=86–99 region assessed by the nuclear shell model,” Phys. Rev. C 109, no.3, 034321 (2024) [arXiv:2312.07111 [nucl-th]].DOI
  41. [41]A. Nava, L. Bern ardini, M. Biassoni, T. Brad anini, C. Brofferio, M. Carminati, G. De Gregorio, C. Fiorini, G. Gagliardi and P. Lechner, et al. “Measurement of the 14C spectrum with Silicon Drift Detectors: towards the study of forbidden β transitions,” [arXiv:2405.07797 [physics.ins-det]].DOI

Paper details

vlnc:W_yjza358t
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents