betaFeedback

WorksPhysics and Astronomy

Self-diffusiophoretic propulsion of a spheroidal particle in a shear-thinning fluid

Abstract

Shear-thinning viscosity is a non-Newtonian behaviour that active particles often encounter in biological fluids such as blood and mucus. The fundamental question of how this ubiquitous non-Newtonian rheology affects the propulsion of active particles has attracted substantial interest. In particular, spherical Janus particles driven by self-diffusiophresis, a major physico-chemical propulsion mechanism of synthetic active particles, were shown to always swim slower in a shear-thinning fluid than in a Newtonian fluid. In this work, we move beyond the spherical limit to examine the effect of particle eccentricity on self-diffusiophoretic propulsion in a shear-thinning fluid. We use a combination of asymptotic analysis and numerical simulations to show that shear-thinning rheology can enhance self-diffusiophoretic propulsion of a spheroidal particle, in stark contrast to previous findings for the spherical case. A systematic characterization of the dependence of the propulsion speed on the particle's active surface coverage has also uncovered an intriguing feature associated with the propulsion speeds of a pair of complementarily coated particles not previously reported. Symmetry arguments are presented to elucidate how this new feature emerges as a combined effect of anisotropy of the spheroidal geometry and nonlinearity in fluid rheology.

Introduction

Due to their small sizes, swimming microorganisms such as bacteria and spermatozoa live in a low-Reynolds-number world, where viscous forces dominate inertial forces. They use a variety of strategies to overcome the challenge of generating self-propulsion at low Reynolds number [60]. Extensive studies have elucidated the hydrodynamics of these biological propulsion mechanisms and shed light on their profound roles in various biological processes [22, 43]. In recent decades, there are also growing interests in developing synthetic active particles that can self-propel like living microorganisms for biomedical and microfluidic applications, including self-assembly [73] (Schwarz-Linek et al. 2012), drug delivery [24], and motion-based microsensing [37]. Some synthetic active particle designs are inspired by biological systems, such as artificial helical propellers [75, 25], which mimic the helical structure of bacterial flagella [41]. Other novel designs exploit different physical or physico-chemical mechanisms to achieve self-propulsion [66, 4, 51] (Patteson et al. 2016).

In particular, a major class of synthetic active particles converts chemical energy into motility by asymmetric chemical reactions on the particle surface. A variety of novel synthetic active colloids has been developed [54, 9, 76]. For instance, microspheres half-coated in platinum, also known as Janus particles, can self-propel via catalytic decomposition of hydrogen peroxide on the platinum-coated surface [33, 64]. While the exact mechanism underlying the resulting motion is still under debate [7, 19, 21], it has been hypothesised that the motion is diffusiophoretic as a result of the gradients of molecular oxygen produced by the catalytic decomposition on the half-coated surface [29, 28, 51]. Since the solute concentration gradient is self-generated, the motion of these active particles is also referred to as self-diffusiophoresis. To model the self-diffusiophoretic motion, a common approach is to separate the fluid domain into outer (the bulk fluid) and inner (the interaction layer) regions, where the short-range solute-particle interaction is assumed to be confined in the interaction layer [1, 36]. When the interaction layer is thin relative to particle size, the phoretic effects can be represented by a distribution of effective slip velocities at the particle surface, analogous to the squirmer model [48, 6, 56] proposed for swimming ciliates such as Paramecium and Volvox. While the slip velocity in the squirmer model is determined by the beating motion of short cilia covering the cell, the slip velocity of a self-diffusiophoretic particle is proportional to the solute concentration gradient and phoretic mobility calculated from the interaction potential in the interaction layer [1, 36]. As a remark, recent studies have indicated that the standard self-diffusiophoretic framework described may become ineffective when the reactive species are charged [8, 16, 2].

Extensive studies have elucidated various interesting features of self-diffusiophoretic motion in a Newtonian fluid [51]. However, most biological fluids such as blood and mucus display non-Newtonian (complex) rheological behaviors including viscoelasticity and shear-thinning viscosity [34, 3]. Since these synthetic active particles will invariably encounter biological fluids in their biomedical applications, a fundamental question is how different non-Newtonian rheological behaviors impact the propulsion of these active particles (Patteson et al. 2016). While many previous theoretical and experimental studies focused on swimming in viscoelastic fluids [70, 20, 68, 52, 17, 78, 63, 4] (Li et al. 2021), recent studies have begun to address the effect of shear-thinning viscosity [50, 72, 23, 53, 30] (Li & Ardekani 2015). A shear-thinning fluid loses its viscosity with applied shear due to changes in its microstructure. Such a non-Newtonian behaviour was found to impact the propulsion of various low-Reynolds-number swimmers in qualitatively different manners [15, 14, 27, 18, 61] (Qu & Breuer 2020). In particular, Datt et al. [15] considered a general spherical squirmer model in a shear-thinning fluid and demonstrated how shear-thinning rheology can both enhance and hinder its propulsion, depending on specific details of the slip velocity. Interestingly, in a latter study [14], spherical self-diffusiophoretic particles were found to always swim slower in a shear-thinning fluid than in a Newtonian fluid for any level of active surface coverage. This also prompts the question to what extent the conclusion of hindered swimming continues to hold for non-spherical self-diffusiophoretic particles.

Swimmers with non-spherical shapes are commonly found in both nature and engineered systems. For instance, ciliates such as Paramecium and Tetrahymena have approximately prolate spheroidal body shapes. Keller & Wu [39] considered a spheroidal squirmer model, which was extended by later studies to probe the effect of geometrical shape upon ciliary locomotion [35, 71, 57]. Furthermore, synthetic active particles of non-spherical shapes, including prolate spheroids and general slender bodies, were also fabricated and studied experimentally and theoretically [11, 10, 26, 67, 57, 77, 38, 58, 74]. In particular, Poehnl et al. [57] analysed the self-diffusiophoretic motion of spheroidal particles in a Newtonian fluid. However, much less is known about these spheroidal active particles in non-Newtonian fluids. A recent study has suggested that shear-thinning rheology can indeed enhance the propulsion of a squirming spheroid [27]. However, it remains unclear whether or not a spheroidal self-diffusiophoretic particle can swim faster in a shear-thinning fluid than in a Newtonian fluid, which was shown impossible for the spherical case [14]. In this work, we fill in this knowledge gap by analysing the self-diffusiophoretic motion of a spheroidal particle in a shear-thinning fluid. We use asymptotic analysis and numerical simulations to reveal how shear-thinning viscosity impacts the propulsion speed of a prolate spheroidal self-diffusiophoretic particle with different eccentricities and levels of active surface coverage. Our results have uncovered some propulsion behaviours not observed in the spherical case and we present symmetry considerations to help elucidate the emergence of these new features as a combined effect of particle anisotropy and nonlinear fluid rheology.

Problem formulation

Geometrical setup

We examine a prolate spheroidal particle characterised by a major axis, aa, and a minor axis, bb, as illustrated in Figure 1. The prolate spheroidal coordinates (τ,ζ,ϕ)(\tau,\zeta,\phi), where τ∈[1,∞)\tau\in[1,\infty), ζ∈[−1,1]\zeta\in[-1,1], and ϕ∈[0,2π)\phi\in[0,2\pi), are employed in this work. The prolate spheroidal coordinates can be related to the cylindrical coordinates (r,z,ϕ)(r,z,\phi) as

Figure 1. Geometric configuration of a spheroidal Janus particle. The model is presented in prolate spheroidal coordinates (τ,ζ,ϕ)(\tau,\zeta,\phi). The coordinate grid is indicated by dashed lines, and the basis vectors are denoted eτ\mathbf{e}_{\tau} and eζ\mathbf{e}_{\zeta}. The active cap of the particle, depicted in grey, spans from ζ=−1\zeta=-1 to ζ0\zeta_0. The rest of the surface is inert.

r=cfτ2−11−ζ2,z=cfτζ,(1)r=c_f\sqrt{\tau^2-1}\sqrt{1-\zeta^2},\qquad z=c_f\tau\zeta, \tag*{(1)}

where r2=x2+y2r^2=x^2+y^2, and cf=a2−b2c_f=\sqrt{a^2-b^2}. The surface of the spheroidal particle is given by the equation

z2a2+r2b2=1,(2)\frac{z^2}{a^2}+\frac{r^2}{b^2}=1, \tag*{(2)}

which translates to r=b1−ζ2r=b\sqrt{1-\zeta^2} and z=aζz=a\zeta. Comparing with (2.1), the spheroidal particle surface can be simply represented by

τ=τ0=1/e,(3)\tau=\tau_0=1/e, \tag*{(3)}

where e=cf/ae=c_f/a is the eccentricity. The basis vectors in the prolate spheroidal coordinates, represented as (eτ,eζ,eϕ)(\mathbf{e}_{\tau},\mathbf{e}_{\zeta},\mathbf{e}_{\phi}), are related to the basis vectors in cylindrical coordinates, denoted as (er,ez,eϕ)(\mathbf{e}_r,\mathbf{e}_z,\mathbf{e}_{\phi}), in the following manner,

eτ=cfτhτer+cfζhτez,eζ=−cfζhζer+cfτhζez.(4)\mathbf{e}_{\tau}=\frac{c_f\tau}{h_{\tau}}\mathbf{e}_r+\frac{c_f\zeta}{h_{\tau}}\mathbf{e}_z,\qquad\mathbf{e}_{\zeta}=-\frac{c_f\zeta}{h_{\zeta}}\mathbf{e}_r+\frac{c_f\tau}{h_{\zeta}}\mathbf{e}_z. \tag*{(4)}

The metric coefficients for the prolate spheroidal coordinates are given by

hτ=cfτ2−ζ2τ2−1,hζ=cfτ2−ζ21−ζ2,hϕ=cfτ2−11−ζ2.(5)h_{\tau}=\frac{c_f\sqrt{\tau^2-\zeta^2}}{\sqrt{\tau^2-1}},\qquad h_{\zeta}=\frac{c_f\sqrt{\tau^2-\zeta^2}}{\sqrt{1-\zeta^2}},\qquad h_{\phi}=c_f\sqrt{\tau^2-1}\sqrt{1-\zeta^2}. \tag*{(5)}

On the surface of the prolate spheroidal particle, the unit normal vector pointing outwards is given by n=eτ\mathbf{n}=\mathbf{e}_{\tau}, and the unit tangent vector pointing upwards is given by t=eζ\mathbf{t}=\mathbf{e}_{\zeta} as illustrated in Figure 1.

Governing equations and boundary conditions

We treat the problem within the continuum framework of self-diffusiophoretic propulsion [28, 49], where the particle interacts with a solute species of local concentration CC. Here, we consider an axisymmetric Janus spheroidal particle with chemically active and inert compartments, with the polar position ζ0\zeta_0 specifying the active surface coverage as illustrated in Figure 1. On the active portion of the particle surface (τ=τ0, ζ≤ζ0)(\tau=\tau_0,\ \zeta\le\zeta_0), we assume that the solute is emitted/absorbed with a fixed-flux characterised by the activity AA,

Dn⋅∇C=−A,(6)D\mathbf{n}\cdot\nabla C=-A, \tag*{(6)}

where DD is the diffusivity, A>0A>0 corresponds to solute emission, and A<0A<0 corresponds to the solute absorption. The activity becomes zero (A=0)(A=0) on the inert portion of the particle surface (τ=τ0, ζ>ζ0)(\tau=\tau_0,\ \zeta>\zeta_0). Under the assumption of a thin interaction layer (Golestanian et al. 2005, 2007; Michelin & Lauga [49]; Datt et al. [14]), the effective slip velocity at the surface of the particle,

us=M(I−nn)⋅∇C,(7)\mathbf{u}_{s}=M(\mathbf{I}-\mathbf{n}\mathbf{n})\cdot\nabla C, \tag*{(7)}

is proportional to the tangential concentration gradients and the phoretic mobility MM determined by the interaction potential profile (Anderson [1]; Michelin & Lauga [49]). In general, when the interactions are attractive, M<0M<0 and the slip velocity is opposite to the concentration gradients; when the interactions are repulsive, M>0M>0 and the slip velocity is along the concentration gradients. In this work, we present results for the case where M>0M>0 and A>0A>0 without loss of generality. By symmetry and linearity, a flipping of the sign of MM or AA only inverts the direction of swimming velocity in the results presented below.

In the bulk fluid, the solute concentration is governed by an advection-diffusion equation

∂C∂t+u⋅∇C=D∇2C,(8)\frac{\partial C}{\partial t}+\mathbf{u}\cdot\nabla C=D\nabla^{2}C, \tag*{(8)}

where u\mathbf{u} is the velocity of the flow, and the solute concentration in the far-field is denoted by C∞C_{\infty}. In the inertialess regime, the flow generated by the phoretic slip velocity is governed by the momentum and continuity equations, respectively, as

∇⋅σ=0,∇⋅u=0,(9)\nabla\cdot\boldsymbol{\sigma}=0,\qquad\nabla\cdot\mathbf{u}=0, \tag*{(9)}

where σ=−pI+T\boldsymbol{\sigma}=-p\mathbf{I}+\mathbf{T}, pp is the pressure, I\mathbf{I} is the identity tensor, and T\mathbf{T} is the deviatoric stress tensor. The boundary condition for the velocity field on the particle surface in the laboratory frame is given by

u(τ=τ0)=us(ζ)+U,(10)\mathbf{u}(\tau=\tau_{0})=\mathbf{u}_{s}(\zeta)+\mathbf{U}, \tag*{(10)}

where us\mathbf{u}_{s} is the phoretic slip velocity given by (2.7), and U=Uez\mathbf{U}=U\mathbf{e}_{z} is the unknown propulsion velocity, which occurs in the zz-direction by axisymmetry. The flow decays to zero in the far field, u(τ→∞)=0\mathbf{u}(\tau\to\infty)=0. The system of equations is closed by enforcing the force-free condition on the particle,

∫Sn⋅σ dS=0,(11)\int_{S}\mathbf{n}\cdot\boldsymbol{\sigma}\,\mathrm{d}S=0, \tag*{(11)}

where SS denotes the particle surface.

Shear-thinning rheology

To probe the effect of shear-thinning rheology on the self-diffusiophoretic motion, we consider here the Carreau constitutive model (Bird et al. [5]), which has been shown effective in capturing the shear-thinning viscosity of different biological fluids (Vélez-Cordero & Lauga [72]). In the Carreau model, the deviatoric stress is given by

T=[μ∞+(μ0−μ∞)(1+12λ2γ˙:γ˙)n−12]γ˙;(12)\mathbf{T}=\left[\mu_{\infty}+(\mu_{0}-\mu_{\infty})\left(1+\frac{1}{2}\lambda^{2}\dot{\boldsymbol{\gamma}}:\dot{\boldsymbol{\gamma}}\right)^{\frac{n-1}{2}}\right]\dot{\boldsymbol{\gamma}}; \tag*{(12)}

here μ0\mu_{0} and μ∞\mu_{\infty} represent, respectively, the viscosities when the shear rate is zero and infinite, 1/λ1/\lambda characterizes the critical shear rate at which the non-Newtonian behaviour becomes significant, and γ˙=∇u+(∇u)T\dot{\boldsymbol{\gamma}}=\nabla\mathbf{u}+(\nabla\mathbf{u})^{T} is the strain rate tensor. For low and high shear rates (relative to the critical shear rate), the fluid tends to behave as a Newtonian fluid with viscosity, respectively, μ0\mu_{0} and μ∞\mu_{\infty}. In the intermediate regime, the fluid displays a power-fluid behaviour, with the index n<1n<1 characterising the degree of shear-thinning.

Non-dimensionalisation

We non-dimensionalise the problem by scaling lengths with aa, velocities with MA/DMA/D, stresses by μ0MA/Da\mu_0MA/Da, and the solute concentration with Aa/DAa/D. Hereafter we consider only dimensionless quantities and use the same symbols as their dimensional counterparts for convenience.

We denote the solute concentration relative to the far-field solute concentration as c=C−C∞c=C-C_\infty, which satisfies the dimensionless advection-diffusion equation,

Pe(∂c∂t+u⋅∇c)=∇2c.(13)Pe\left(\frac{\partial c}{\partial t}+\mathbf{u}\cdot\nabla c\right)=\nabla^2c. \tag*{(13)}

Here, the Péclet number Pe=MAa/D2Pe=MAa/D^2 characterises the relative importance of advective to diffusive transport of the solute. We assume the diffusivity is high enough and neglect the alteration in solute distribution caused by the flow from phoretic effects, the solute concentration becomes harmonic,

∇2c=0.(14)\nabla^2c=0. \tag*{(14)}

The dimensionless boundary condition on the active portion of the particle surface (τ=τ0, ζ≤ζ0)(\tau=\tau_0,\ \zeta\le\zeta_0) is given by

n⋅∇c=−1,(15)\mathbf{n}\cdot\nabla c=-1, \tag*{(15)}

whereas that on the inert portion (τ=τ0, ζ>ζ0)(\tau=\tau_0,\ \zeta>\zeta_0) is simply

n⋅∇c=0.(16)\mathbf{n}\cdot\nabla c=0. \tag*{(16)}

The relative solute concentration decays to zero at infinity,

c(τ→∞)=0.(17)c(\tau\to\infty)=0. \tag*{(17)}

Given that the solute concentration is decoupled, the governing equations for the fluid align with those presented in (9). The Carreau constitutive equation is rendered dimensionless as

T=γ˙+(1−β)[−1+(1+12Cu2γ˙:γ˙)n−12]γ˙,(18)\mathbf{T}=\dot{\boldsymbol{\gamma}}+(1-\beta)\left[-1+\left(1+\frac{1}{2}Cu^2\dot{\boldsymbol{\gamma}}:\dot{\boldsymbol{\gamma}}\right)^{\frac{n-1}{2}}\right]\dot{\boldsymbol{\gamma}}, \tag*{(18)}

where β=μ∞/μ0\beta=\mu_\infty/\mu_0, the viscosity ratio, and Cu=λMA/aDCu=\lambda MA/aD, the Carreau number, which compares the characteristic shear rate MA/aDMA/aD to the critical shear rate 1/λ1/\lambda.

In the laboratory frame, the dimensionless boundary condition for the velocity field on the particle surface is given by u(τ=τ0)=us+Uez\mathbf{u}(\tau=\tau_0)=\mathbf{u}_s+U\mathbf{e}_z, where the slip velocity in dimensionless form reads

us=(I−nn)⋅∇c,(19)\mathbf{u}_s=(\mathbf{I}-\mathbf{n}\mathbf{n})\cdot\nabla c, \tag*{(19)}

and the flow decays to zero in the far-field, u(τ→∞)=0\mathbf{u}(\tau\to\infty)=\mathbf{0}. In the following calculations, we determine the unknown propulsion speed UU of the spheroidal self-diffusiophretic particle in a shear-thinning fluid.

Asymptotic analysis and numerical simulations

Asymptotic analysis

The solute concentration can be obtained by solving the Laplace equation (14) with boundary conditions (15)–(17) in the prolate spheroidal coordinates. An analytical solution in form of a series is given by Popescu et al. [59]

c(τ,ζ)=∑n=0∞ρnQn(τ)Pn(ζ),(20)c(\tau,\zeta)=\sum_{n=0}^{\infty}\rho_n Q_n(\tau)P_n(\zeta), \tag*{(20)}

where Pn(ζ)P_n(\zeta) and Qn(τ)Q_n(\tau) are, respectively, the Legendre functions of the first and the second kinds. As τ≥τ0>1\tau\ge\tau_0 > 1, the Legendre functions of the second kind vanish when τ→∞\tau\to\infty, satisfying the far-field boundary condition for the relative concentration, (17). By substituting the solution (20) into the boundary conditions at the particle surface, (2.15)–(2.16), and employing the orthogonality of the Legendre functions, the coefficients ρn\rho_n in the series solution are determined as

ρn(τ0,ζ0)=−2n+121Qn′(τ0)τ0τ02−1∫−1ζ0τ02−ζ2Pn(ζ) dζ.(21)\rho_n(\tau_0,\zeta_0)=-\frac{2n+1}{2}\frac{1}{Q_n'(\tau_0)\tau_0\sqrt{\tau_0^2-1}}\int_{-1}^{\zeta_0}\sqrt{\tau_0^2-\zeta^2}P_n(\zeta)\,\mathrm{d}\zeta. \tag*{(21)}

By employing the solution (20) in (19), the resulting phoretic slip velocity at the particle surface, us(ζ)=useζ\mathbf{u}_s(\zeta)=u_s\mathbf{e}_{\zeta}, is given by

us(ζ)=τ0∑n=0∞BnPn1(ζ)τ02−ζ2,(22)u_s(\zeta)=\tau_0\sum_{n=0}^{\infty}B_n\frac{P_n^1(\zeta)}{\sqrt{\tau_0^2-\zeta^2}}, \tag*{(22)}

where the phoretic modes are given by

Bn=−ρn(τ0,ζ0)Qn(τ0),(23)B_n=-\rho_n(\tau_0,\zeta_0)Q_n(\tau_0), \tag*{(23)}

and Pn1P_n^1 is the associated Legendre function with order 1.

We perform an asymptotic analysis in the weakly non-Newtonian regime where the deviation of the viscosity ratio from unity, ϵ=1−β\epsilon=1-\beta, is small. We expand the physical quantities in powers of ϵ\epsilon as

{u,γ˙,σ,p,T,U}={u0,γ˙0,σ0,p0,T0,U0}+ϵ{u1,γ˙1,σ1,p1,T1,U1}+O(ϵ2).(24)\{\mathbf{u},\dot{\boldsymbol{\gamma}},\boldsymbol{\sigma},p,T,U\}=\{\mathbf{u}_0,\dot{\boldsymbol{\gamma}}_0,\boldsymbol{\sigma}_0,p_0,T_0,U_0\}+\epsilon\{\mathbf{u}_1,\dot{\boldsymbol{\gamma}}_1,\boldsymbol{\sigma}_1,p_1,T_1,U_1\}+O(\epsilon^2). \tag*{(24)}

The zeroth-order problem corresponds to the Newtonian problem, where σ0=−p0I+γ˙0\boldsymbol{\sigma}_0=-p_0\mathbf{I}+\dot{\boldsymbol{\gamma}}_0, and γ˙0=∇u0+(∇u0)T\dot{\boldsymbol{\gamma}}_0=\nabla\mathbf{u}_0+(\nabla\mathbf{u}_0)^{T}. For boundary conditions, we have u0(τ=τ0)=U0ez+useζ\mathbf{u}_0(\tau=\tau_0)=U_0\mathbf{e}_z+u_s\mathbf{e}_{\zeta} on the particle surface and u0(τ→∞)=0\mathbf{u}_0(\tau\to\infty)=0 in the far-field, where usu_s is given in (22). The flow field u0\mathbf{u}_0 and propulsion speed U0U_0 of this zeroth-order, Newtonian problem were obtained in previous works [44, 59, 57] (Lauga & Michelin 2016), which we summarise in Appendix A.

We consider the first-order non-Newtonian correction to the Newtonian problem. To the order of ϵ\epsilon, the flow satisfies

∇⋅σ1=0,(25)\nabla\cdot\boldsymbol{\sigma}_1=0, \tag*{(25)}
∇⋅u1=0,(26)\nabla\cdot\mathbf{u}_1=0, \tag*{(26)}

where σ1=−p1I+T1\boldsymbol{\sigma}_1=-p_1\mathbf{I}+\mathbf{T}_1 and the stress tensor T1=γ˙1+A\mathbf{T}_1=\dot{\boldsymbol{\gamma}}_1+\mathbf{A}, with

A=[−1+(1+12Cu2γ˙0:γ˙0)n−22]γ˙0.(27)\mathbf{A}=\left[-1+\left(1+\frac{1}{2}Cu^2\dot{\boldsymbol{\gamma}}_0:\dot{\boldsymbol{\gamma}}_0\right)^{\frac{n-2}{2}}\right]\dot{\boldsymbol{\gamma}}_0. \tag*{(27)}

For boundary conditions, we have the first correction to the Newtonian propulsion velocity, u1(τ=τ0)=U1=U1ez\mathbf{u}_1(\tau=\tau_0)=U_1=U_1\mathbf{e}_z, on the particle surface, and u1(τ→∞)=0\mathbf{u}_1(\tau\to\infty)=0 in the far-field. To obtain the propulsion speed U1U_1, we bypass detailed calculations of the flow via a reciprocal theorem approach [40]. By considering an auxiliary Stokes flow due to a prolate spheroid of the same geometry translating at a velocity U^\hat{\mathbf{U}}, where the velocity u^\hat{\mathbf{u}} and stress σ^\hat{\boldsymbol{\sigma}} fields satisfy ∇⋅σ^=0\nabla\cdot\hat{\boldsymbol{\sigma}} = 0 and ∇⋅u^=0\nabla\cdot\hat{\mathbf{u}} = 0, one can form the relation

u^⋅(∇⋅σ1)=u1⋅(∇⋅σ^)=0.(28)\hat{\mathbf{u}} \cdot(\nabla\cdot\boldsymbol{\sigma}_1) = \mathbf{u}_1 \cdot(\nabla\cdot\hat{\boldsymbol{\sigma}}) = 0. \tag*{(28)}

By integrating the relation over the fluid volume VV exterior to the particle surface SS and applying the divergence theorem, one can obtain

∫Sn⋅σ^⋅u1 dS−∫Sn⋅σ1⋅u^ dS=∫Vσ1:∇u^ dV−∫Vσ^:∇u1 dV.(29)\int_S \mathbf{n} \cdot\hat{\boldsymbol{\sigma}} \cdot\mathbf{u}_1 \, \mathrm{d}S - \int_S \mathbf{n} \cdot\boldsymbol{\sigma}_1 \cdot\hat{\mathbf{u}} \, \mathrm{d}S = \int_V \boldsymbol{\sigma}_1 : \nabla\hat{\mathbf{u}} \, \mathrm{d}V - \int_V \hat{\boldsymbol{\sigma}} : \nabla\mathbf{u}_1 \, \mathrm{d}V. \tag*{(29)}

We note that due to the force-free condition at O(ϵ)O(\epsilon), ∫Sn⋅σ1 dS=0\int_S \mathbf{n} \cdot\boldsymbol{\sigma}_1 \, \mathrm{d}S = 0, the second integral on the left hand side of (3.10) is given by ∫Sn⋅σ1⋅u^ dS=(∫Sn⋅σ1 dS)⋅U^=0\int_S \mathbf{n} \cdot\boldsymbol{\sigma}_1 \cdot\hat{\mathbf{u}} \, \mathrm{d}S = \left(\int_S \mathbf{n} \cdot\boldsymbol{\sigma}_1 \, \mathrm{d}S\right) \cdot\hat{\mathbf{U}} = 0. Upon substituting the constitutive equations for σ^\hat{\boldsymbol{\sigma}} and σ1\boldsymbol{\sigma}_1 and applying the boundary condition u1=U1\mathbf{u}_1 = \mathbf{U}_1 on SS, (3.10) simplifies to

F^⋅U1=∫VA:∇u^ dV,(30)\hat{\mathbf{F}} \cdot\mathbf{U}_1 = \int_V \mathbf{A} : \nabla\hat{\mathbf{u}} \, \mathrm{d}V, \tag*{(30)}

where F^=∫Sn⋅σ^ dS=−8πτ0−1[(τ02+1)coth⁡−1τ0−τ0]−1ez\hat{\mathbf{F}} = \int_S \mathbf{n} \cdot\hat{\boldsymbol{\sigma}} \, \mathrm{d}S = -8\pi\tau_0^{-1}\left[(\tau_0^2+1)\coth^{-1}\tau_0-\tau_0\right]^{-1}\mathbf{e}_z is the drag on the translating prolate spheroid in the auxiliary problem. Therefore, the first-order correction to the phoretic speed is given in terms of a volume integral in prolate spheroidal coordinates as

U1=−(τ02+1)coth⁡−1τ0−τ04τ02∫τ0∞∫−11(A:∇u^)(τ2−ζ2) dζdτ,(31)U_1 = -\frac{(\tau_0^2+1)\coth^{-1}\tau_0-\tau_0}{4\tau_0^2}\int_{\tau_0}^{\infty}\int_{-1}^{1}(\mathbf{A}:\nabla\hat{\mathbf{u}})(\tau^2-\zeta^2)\,\mathrm{d}\zeta\mathrm{d}\tau, \tag*{(31)}

which can be evaluated with quadrature.

Numerical simulation

To extend the results beyond the weakly non-Newtonian regime considered in the asymptotic analysis in §3.1, we develop numerical simulations based on the finite element method (FEM) using the partial differential equation (PDE) module of the commercial package COMSOL to perform fully coupled simulations of the momentum and continuity equations (9) with the Carreau-Yasuda constitutive equation (18), and the solute transport equation (14). We use an axisymmetric computational domain with a dimensionless radius of 500 to simulate the self-propulsion of the Janus particle in an unbounded fluid. A sufficiently large domain size is important to guarantee accuracy due to the slow spatial decay of flows at low Reynolds numbers. The Janus particle is modelled as a half-spheroid whose major axis coincides with the axis of symmetry. The simulations are performed in a reference frame that is co-moving with the particle, and the far-field velocity is equal to the negative swimming velocity determined by the force-free condition (11). The computational domain is discretised by approximately 100000–127000 triangular elements, and the mesh is locally refined near the particle to properly resolve the spatial variation of the viscosity. Taylor-Hood and quadratic Lagrange elements are adopted to discretise the flow field (u,p)(u,p) and the concentration field cc, respectively. It is important to note that, theoretically, there exists a discontinuous alteration in surface activity between the active and inert compartments of the Janus particle. However, when modelled numerically, this abrupt transition can cause significant numerical errors, particularly at lower CuCu values. To alleviate the numerical errors, we introduce a minor smoothing transition, dependent on the mesh size, to the surface activity in the vicinity of the discontinuity.

In addition to comparing with the asymptotic results in this work, we have validated our numerical implementation against previous results for a spherical Janus particle in a shear-thinning fluid [14] and a spheroidal Janus particle in a Newtonian fluid [59]; see Appendix § 7 for more details.

Results and discussion

Effect of particle eccentricity on self-diffusiophoresis in a shear-thinning fluid

In a Newtonian fluid, the dependence of the self-diffusiophoretic propulsion speed on the particle geometry and catalyst coverage was examined in detail by previous works (Popescu et al. [59]; Poehnl et al. [57]). Here we investigate how shear-thinning rheology impacts the propulsion speeds (UU) relative to their corresponding Newtonian values (U0U_0). The special case of a spherical Janus particle was examined by Datt et al. [14] and shown to always swim slower in a shear-thinning fluid than in a Newtonian fluid across a wide range of CuCu. In Figure 2(a), we reproduce these results by setting the eccentricity to be zero (e=0e = 0, black solid line and black circles): the spherical Janus particle displays reduced propulsion speed (U/U0<1U/U_0 < 1) as CuCu increases from zero, reaching a local minimum when CuCu is around O(1)O(1), before approaching the Newtonian value again when CuCu becomes exceedingly large. We employ the spherical case as a benchmark to probe the effect of particle geometry by varying the eccentricity from e=0e = 0 to e=0.99e = 0.99. From spherical to moderately spheroidal particles (e.g., e=0.6e = 0.6), the increased eccentricity does not affect the qualitative features of the speed dependence on CuCu.

Figure 2. (a) Swimming speed of a spheroidal Janus particle UU in a shear-thinning fluid relative to its corresponding Newtonian value U0U_0 as a function of the Carreau number for different values of eccentricity ee when the shear-thinning effect is weak (β=0.9\beta= 0.9). The asymptotic results in the small ϵ=1−β\epsilon= 1-\beta limit (lines) agree well with numerical simulations (symbols). For large eccentricities (e.g. e=0.9e = 0.9 and 0.990.99), the Janus particle can swim faster in a shear-thinning fluid than in a Newtonian fluid. (b) Numerical results for strong shear-thinning effect (β=0.1\beta= 0.1), the qualitative behaviours remain the same, the speed variations are substantially larger. In both (a, b), the active coverage of the particle ζ0=0\zeta_0 = 0 and the shear-thinning power law index n=0.25n = 0.25.

However, for more slender spheroidal particles (e.g., e=0.99e = 0.99), our results reveal that a self-diffusiophoretic particle can also swim faster in a shear-thinning fluid than in a Newtonian fluid (blue dotted lines and blue upward triangles), which was shown impossible for a spherical particle (black solid line and black circles) (Datt et al. [14]). These new behaviors are predicted by both the asymptotic results by the reciprocal theorem (lines) and results by numerical simulations (symbols) in the weakly shear-thinning regime (β=0.9\beta= 0.9), which display excellent agreements as shown in Figure 2(a). We verify that these new features continue to exist beyond the weakly non-Newtonian regime by considering a small viscosity ratio (β=0.1\beta= 0.1) in Figure 2(b), where we observe the same qualitative behaviours but with greater magnitudes of speed enhancement and reduction at different CuCu.

Effect of active surface coverage on self-diffusiophoresis in a shear-thinning fluid

We focus in §4.1 on Janus particles with half active surface coverage (ζ0=0\zeta_0 = 0), which was shown to maximise the self-diffusiophoretic propulsion speed of spherical and spheroidal particles in a Newtonian fluid. Here, we examine whether this feature remains the same or not when the fluid displays shear-thinning rheology. In Figure 3(a), we display the propulsion speed relative to its Newtonian value as a function of particle eccentricity and active surface coverage, which varies between ζ0=−1\zeta_0 = -1 (no active surface coverage) and ζ0=1\zeta_0 = 1 (full active surface coverage). It is observed that, regardless of the active surface coverage, the regime of enhanced propulsion (U/U0>1U/U_0 > 1, indicated by the dashed line in Figure 3(a) only occurs when the particle eccentricity goes beyond a threshold value of approximately 0.7. In addition, the enhanced propulsion occurs for a wider range of active surface coverage with increased particle eccentricity. For instance, among all the values of active surface coverage examined in Figure 3(a), while enhanced propulsion is observed only in about 15% of the cases when e=0.8e = 0.8, the percentage increase to more than 60% when e=0.99e = 0.99. Another interesting feature is the asymmetry in the occurrence of enhanced propulsion with respect to the active surface coverage: the regime is not symmetrically distributed around ζ0\zeta_0 but instead skewed towards the positive direction of ζ\zeta. This observation also suggests that the specific case of half active coverage (ζ0=0\zeta_0 = 0), which was shown to maximise self-diffusiophoretic propulsion in previous works [59, 57, 14], may no longer be optimal for spheroidal particles in shear-thinning fluids.

Figure 3. (a) Swimming speed of a spheroidal Janus particle in a shear-thinning fluid with different values of eccentricity ee and active coverage ζ0\zeta_0. The dashed line indicates the particles of which the swimming speed is enhanced by the shear-thinning effect. (b) Relative swimming efficiency of a spheroidal Janus particle with different values of eccentricity and active coverage. For all data points, Cu=20000Cu = 20000, β=0.1\beta= 0.1 and n=0.25n = 0.25.

In addition to propulsion speed, efficiency is another relevant performance measure of the swimming motion. Recent studies have investigated how the geometrical shape of active particles influence their efficiency of swimming in a Newtonian fluid [31] (Daddi-Moussa-Ider et al. 2021). Here we adopt the widely used definition of swimming efficiency introduced by Lighthill [47] for low-Reynolds-number swimmers, η=F⋅U/P\eta= \mathbf{F} \cdot\mathbf{U}/P, to characterize the efficiency of swimming in a shear-thinning fluid. Lighthill’s efficiency compares the power dissipation of the swimmer, P=∫n⋅σ⋅u dSP = \int\mathbf{n} \cdot\boldsymbol{\sigma} \cdot\mathbf{u}\,\mathrm{d}S, with the power required to move a particle with identical shape at the same swimming velocity U\mathbf{U} against the drag force F\mathbf{F}. Our results show that, while speed enhancement occurs only in a specific domain of eccentricity and active surface coverage (Figure 3(a)), the swimming efficiency in a shear-thinning fluid is consistently enhanced, η/η0>1\eta/\eta_0 > 1, relative to the corresponding swimming efficiency in a Newtonian fluid (η0\eta_0) in the entire domain shown in Figure 3(b). Taken together, these results reveal that self-diffusiophoretic propulsion can be enhanced both speed-wise and efficiency-wise in a shear-thinning fluid relative to the corresponding case in a Newtonian fluid.

Next, we further examine the asymmetry observed in the enhanced propulsion speed with respect to the active surface coverage shown in Figure 3(a). We display in Figure 4(a) the absolute propulsion speed of a spherical and a spheroidal particles as a function of active surface coverage at different values of CuCu. In Figure 4(a), we observe that the propulsion speed of a spherical particle is symmetric about the half surface coverage (ζ0\zeta_0), which maximises the speed in both Newtonian (Cu=0Cu = 0) and shear-thinning (Cu>0Cu > 0) fluids. In contrast, for a spheroidal particle with e=0.99e = 0.99 shown in Figure 4(b), while the aforementioned features still hold in the Newtonian limit (Cu=0Cu = 0, blue downward triangles), when the fluid is shear-thinning (e.g., Cu=500Cu = 500, red upward triangles) the variation of the propulsion becomes asymmetric about ζ0=0\zeta_0 = 0, which no longer maximises the self-diffusiophoretic propulsion speed. Instead, the maximum propulsion speed occurs at a positive active surface coverage (ζ0>0\zeta_0 > 0) as shown in Figure 4(b), depending on parameters measuring the shear-thinning effect including β\beta and CuCu. The emergence of this novel feature requires the combined presence of both non-Newtonian rheology and non-spherical geometry, which we attempt to better understand via symmetry arguments presented in the next section.

Figure 4. Swimming speed of (a) a spherical (e=0e = 0) and (b) a spheroidal (e=0.99e = 0.99) Janus particle as a function of ζ0\zeta_0 with β=0.1\beta= 0.1. Three fluids are considered: Cu=0Cu = 0 (blue downward-pointing triangle, Newtonian fluid), 500 (red upward-pointing triangle), 20000 (black circle).

Symmetry considerations

To examine this feature of symmetry breaking across the full range of CuCu, we compare the swimming speed of two complementarily coated particles with ζ0=±0.5\zeta_0 = \pm0.5 for the spherical (e=0e = 0, Figure 5a) and spheroidal (e=0.99e = 0.99, Figure 5b) cases. For spherical particles, Figure 5(a) shows that the swimming speed of particle with ζ0=−0.5\zeta_0 = -0.5 (blue triangles) is identical to that with ζ0=0.5\zeta_0 = 0.5 (black circles) over the entire range of CuCu, despite the latter having a significantly larger active surface coverage. On the contrary, Figure 5(b) demonstrates that the swimming speed of two complementarily coated spheroidal particles (ζ0=±0.5\zeta_0 = \pm0.5) only approach the same value when CuCu is exceedingly small or large, where the fluid medium becomes effectively Newtonian. At intermediate values of CuCu, the spheroidal particle with ζ0=−0.5\zeta_0 = -0.5 (blue triangles) generally exhibits a considerably different swimming speed compared with its complementarily coated counterpart (ζ0=0.5\zeta_0 = 0.5, black circles) as shown in Figure 5(b).

Figure 5. Swimming speed of (a) a pair of complementarily coated spherical (e=0e = 0) and (b) spheroidal (e=0.99e = 0.99) particles in a shear-thinning fluid with active coverage ζ0=±0.5\zeta_0 = \pm0.5. The complementarily coated spherical swimmers are propelled with the same speed, while spheroidal swimmers break this symmetry. In both (a, b), β=0.1\beta= 0.1 and n=0.25n = 0.25.

One may understand the above feature as a combined result of symmetry breaking and nonlinear rheology as illustrated in Figure 6. We denote the phoretic slip velocity on the surface of a particle with an active coverage ζ0\zeta_0 as us(ζ;ζ0)u_s(\zeta;\zeta_0) and the corresponding propulsion speed as U(ζ0)U(\zeta_0). We note that in the zero-PePe limit considered here, the linearity of the Laplace equation allows superposition in the solute concentration problem. Now, consider a fully coated particle, the phoretic slip velocity can be decomposed into two complementary cases, us(ζ;1)=us(ζ;−ζ0)−us(−ζ;ζ0)u_s(\zeta;1) = u_s(\zeta;-\zeta_0) - u_s(-\zeta;\zeta_0), as shown in Figure 6 for a spherical and a spheroidal particles. For a fully coated spherical particle, the slip velocity is zero everywhere on the particle surface due to isotropy, us(ζ;1)=0u_s(\zeta;1) = 0. This property leads to the result us(ζ;−ζ0)=us(−ζ;ζ0)u_s(\zeta;-\zeta_0) = u_s(-\zeta;\zeta_0), which means that the boundary conditions on two complementarily coated spherical particles become identical upon a reflection about z=0z = 0. This result is illustrated in Figure 7(a) for the slip velocity of two complementarily coated spherical particles, which consequently, upon a reflection about z=0z = 0, generate the same flow field as shown in Figure 7(c). The identical propulsion speed of these complementarily coated particles, U(ζ0)=U(−ζ0)U(\zeta_0) = U(-\zeta_0), is therefore a direct result of isotropy for spherical self-diffusiophoretic particles, regardless of whether the fluid is Newtonian or non-Newtonian.

Figure 6. Schematics illustrating the symmetry considerations for a pair of complementarily coated particles. The phoretic slip velocity on the surface of a particle with an active coverage ζ0\zeta_0 is denoted as us(ζ;ζ0)u_s(\zeta;\zeta_0), and the corresponding propulsion speed as U(ζ0)U(\zeta_0). The slip velocity on a fully-coated spherical particle is zero everywhere due to the isotropy. Consequently, the flow induced by the particles with active region ±ζ0\pm\zeta_0 always shows a symmetry, which leads to identical speeds. As the slip velocity on a fully-coated anisotropic particle is not zero, the flow and the slip velocity do not have the reflection symmetry, and the particle speeds are not the same in general. However, if the flow is Newtonian, the speeds are the same due to the linearity.

Figure 7. The slip velocity and the flow field around the particles with active region ζ0=±0.5\zeta_0 = \pm0.5, in a shear-thinning fluid with Cu=1Cu = 1, β=0.1\beta= 0.1 and n=0.25n = 0.25. The slip velocity and the flow field around the spherical swimmers has an upside-down symmetry (a)(c), which does not appear in those around the spheroidal swimmers (e=0.99e = 0.99) (b)(d).

When particle eccentricity is introduced, the anisotropy implies that the slip velocity of a fully coated spheroidal particle does not vanish everywhere on the surface of the particle, us(ζ;1)≠0u_s(\zeta;1) \ne0. As illustrated in Figure 7(b), the boundary conditions on two complementarily coated spheroidal particles therefore no longer have the reflection symmetry about z=0z = 0, us(ζ;−ζ0)≠us(−ζ;ζ0)u_s(\zeta;-\zeta_0) \ne u_s(-\zeta;\zeta_0), leading to generally distinct flows surrounding the spheroidal particles as shown in Figure 7(d). Consequently, unlike spherical particles, one may expect two complementarily coated spheroidal particles to have distinct propulsion speeds in general. This conclusion is largely true as shown in Figure 5(b), except for the special case when the fluid is Newtonian. For a Newtonian fluid, the linearity of the governing equations allows the superposition of the solutions associated with the pair of particles with complementary coatings to form the solution of a particle with full coating (Figure 6a), leading to the result, U(1)=U(ζ0)−U(−ζ0)U(1)=U(\zeta_0)-U(-\zeta_0). Since U(1)=0U(1)=0 for a fully coated particle, we obtain the conclusion U(ζ0)=U(−ζ0)U(\zeta_0)=U(-\zeta_0) for a Newtonian fluid, which holds for both spherical and spheroidal particles, despite the absence of reflection symmetry in their slip velocities. When the fluid is non-Newtonian, the superposition described above no longer holds, allowing the propulsion speed of two complementarily coated spheroidal particles to be different.

To summarise, isotropy in spherical geometry alone guarantees that two complementarily coated particles propel with identical speeds, regardless of whether the fluid is Newtonian or not. In parallel, in a Newtonian fluid the linearity of the problem alone guarantees the same, regardless of whether the particle is spherical or not. Hence, to propel two complementarily coated particles with different speeds, both isotropy and linearity need to be broken. The emergence of different speeds for a pair of complementarily coated spheroidal particles in a shear-thinning fluid reported here, therefore, serves as a specific example illustrating this general feature.

Concluding remarks

Shear-thinning viscosity is a non-Newtonian behavior that active particles often encounter in biological fluids. The investigation into how this ubiquitous non-Newtonian rheology impacts the propulsion speed of active particles has garnered considerable recent interest. In particular, previous studies have demonstrated how shear-thinning rheology slows down spherical active particles [15, 14]. A more recent investigation [27] has suggested that, by tuning the geometrical shape of a squirmer, it is possible for a spheroidal squirmer to swim faster in a shear-thinning fluid than in a Newtonian fluid. In this work, we have extended the analysis by van Gogh et al. [27] on the spheroidal squirmer model to self-diffusiophoretic particles, a major physico-chemical propulsion mechanism of synthetic active particles. Unlike the squirmer model, where the velocity distribution on the particle surface is prescribed, the effective slip velocity of a self-diffusiophoretic particle is determined by the solute concentration gradient and the phoretic mobility. Using asymptotic analysis to probe the weakly non-Newtonian behavior, we have demonstrated that shear-thinning viscosity can indeed enhance self-diffusiophoretic propulsion of spheroidal particles with a large particle eccentricity in a specific regime of Carreau number. This result is in stark contrast with spherical self-diffusiophoretic particles, which always swim slower in a shear-thinning fluid [14]. We have also used numerical simulations to verify that the new features uncovered by the asymptotic analysis continue to hold beyond the weakly non-Newtonian regime.

We have also systematically characterised the dependence of the self-diffusiophoretic propulsion speed on the particle’s active surface coverage in a shear-thinning fluid. Previous studies showed that a pair of complementarily coated spherical or spheroidal particles always propel at the same speed in a Newtonian fluid. When the fluid becomes shear-thinning, the same propulsion speed still occurs when the complementarily coated particles are spherical in shape. However, we have found distinct propulsion speeds for two complementarily coated spheroidal particles in a shear-thinning fluid. We have also presented symmetry arguments to better understand how this new feature emerges as a combined effect of anisotropy associated with the spheroidal geometry and nonlinearity associated with the non-Newtonian rheology. Such symmetry-breaking might hint at using anisotropic active particles as a tool for probing microrheology of complex fluids.

We remark on several limitations of the current work and discuss potential directions for further investigations. First, we have neglected the effect of solute advection by considering the zero PePe limit. It remains unclear how the flow modifications due to shear-thinning rheology influence solute advection and thereby the phoretic propulsion. In particular, the symmetry considerations presented in § 4.3, which require the linearity of the Laplace equation, would no longer hold for finite PePe. It would therefore be interesting to probe how the nonlinearity associated with solute advection affects the symmetry breaking observed for the propulsion of complementarily coated particles. Second, we have followed previous work [14] to focus on the non-Newtonian effect in the bulk fluid in this work, neglecting the influence of fluid rheology on the surface slip of a self-diffusiophretic particle, which was shown to modify the propulsion speed of a spherical Janus particle in intriguing manners [12]. In particular, in a weakly shear-thinning fluid, the effect due to the modified slip velocity could dominate the retardation due to the bulk non-Newtonian stress, leading to the speed enhancement of a Janus spherical particle. An investigation is currently underway to extend the analysis beyond the weakly non-Newtonian regime and examine the effect of particle geometry in this more complex physical scenario, where the non-Newtonian effects on both slip and mobility of self-diffusiophoretic particles are taken into account. We also call for future efforts in developing a comprehensive physical understanding of the findings reported in this work. Last, we focus on the effect of shear-thinning viscosity here while complex biological fluids also display other non-Newtonian fluid behaviors including viscoelasticity. Future work accounting for the viscoelastic stress and its combined effects with shear-thinning rheology will shed light on how the geometric shape of self-diffusiophretic particles should be tuned to maximize their propulsion in biological fluids.

Funding. We acknowledge the supports from the National Science Foundation under grant numbers 1931292 and 2323046 (to O.S.P.), the National Natural Science Foundation of China under grant number 1237258 (to Y.M.), and the Fundamental Research Funds for the Central Universities, Peking University (to Y.M.). L.Z. acknowledges the partial support from the Singapore Ministry of Education Academic Research Fund Tier 2 (MOE-T2EP50122-0015). The computation of the work was performed on resources of the National Supercomputing Centre, Singapore (https://www.nscc.sg).

Declaration of interests. The authors report no conflict of interest.

Solution to the zeroth-order (Newtonian) problem

Here we summarise the solution to the zeroth-order problem, which corresponds to the self-diffusiophoretic motion of a spheroidal particle in a Newtonian fluid considered in previous works [44, 59, 57] (Lauga & Michelin 2016). In particular, we follow the approach by Poehnl et al. [57] here to determine the unknown velocity field u0\mathbf{u}_0 and propulsion velocity U0U_0.

The unknown propulsion velocity U0U_0 can be obtained using the Lorentz reciprocal theorem [69, 59, 57], by considering an auxiliary Stokes flow problem (u^,σ^)(\hat{\mathbf{u}},\hat{\boldsymbol{\sigma}}) of a translating prolate spheroidal particle of the same geometry along its major axis. Via the reciprocal theorem [59, 57], an integral relation is obtained as

F^⋅U0=−∫Sus⋅(n⋅σ^) dS,(32)\hat{\mathbf{F}} \cdot\mathbf{U}_0 = -\int_S \mathbf{u}_s \cdot(\mathbf{n} \cdot\hat{\boldsymbol{\sigma}})\,\mathrm{d}S, \tag*{(32)}

which relates the force on the translating particle in the auxiliary problem F^\hat{\mathbf{F}} with the unknown propulsion velocity U0\mathbf{U}_0 via a surface integral involving the surface velocity us\mathbf{u}_s. By using the known solution to the auxiliary problem [32] and simplifying the surface integral in the prolate spheroidal coordinates, the propulsion velocity U0=U0ez\mathbf{U}_0 = U_0\mathbf{e}_z is obtained in terms of the integral [59, 57]

U0=−τ02∫−11us1−ζ2τ02−ζ2 dζ.(33)U_0 = -\frac{\tau_0}{2}\int_{-1}^{1}u_s\frac{\sqrt{1-\zeta^2}}{\sqrt{\tau_0^2-\zeta^2}}\,\mathrm{d}\zeta. \tag*{(33)}

Upon substituting the slip velocity given by (22), one obtain the final expression of the propulsion speed for NN phoretic modes as [57]

U0=τ022∑n=1,oddnNBn∫−11Pn1(ζ)Pn1(ζ)τ02−ζ2 dζ.(34)U_0 = \frac{\tau_0^2}{2}\sum_{\substack{n=1,\,\mathrm{odd}\\ n}}^{N} B_n\int_{-1}^{1}\frac{P_n^1(\zeta)P_n^1(\zeta)}{\tau_0^2-\zeta^2}\,\mathrm{d}\zeta. \tag*{(34)}

To determine the velocity field, we consider a streamfunction ψ0\psi_0 for the axisymmetric flow in the co-moving frame

u0−U0=1hζhϕ∂ψ0∂ζeτ−1hτhϕ∂ψ0∂τeζ,(35)\mathbf{u}_0-U_0=\frac{1}{h_\zeta h_\phi}\frac{\partial\psi_0}{\partial\zeta}\mathbf{e}_\tau-\frac{1}{h_\tau h_\phi}\frac{\partial\psi_0}{\partial\tau}\mathbf{e}_\zeta, \tag*{(35)}

where the far-field corresponds to a uniform flow given by −U0-U_0. A general solution of the streamfunction can be expanded in terms of products of the Gegenbauer functions in the prolate spheroidal coordinates. For a bounded solution satisfying the far-field and force-free condition, the streamfunction takes the form [57]

ψ0(τ,ζ)=∑n=2∞gn(τ)Gn(ζ),(36)\psi_0(\tau,\zeta)=\sum_{n=2}^{\infty}g_n(\tau)G_n(\zeta), \tag*{(36)}

with g2(τ)=C4H4(τ)+D2H2(τ)−2c2U0G2(τ)g_2(\tau)=C_4H_4(\tau)+D_2H_2(\tau)-2c^2U_0G_2(\tau), g3(τ)=C3+C5H5(τ)+D3H3(τ)g_3(\tau)=C_3+C_5H_5(\tau)+D_3H_3(\tau), and gn(τ)=Cn+2Hn+2(τ)+CnHn−2(τ)+DnHn(τ)g_n(\tau)=C_{n+2}H_{n+2}(\tau)+C_nH_{n-2}(\tau)+D_nH_n(\tau) for n≥4n\geq4, where GnG_n and HnH_n are the Gegenbauer polynomials of the first and the second kinds, respectively. The coefficients CnC_n and DnD_n are determined by the tangential slip velocity and the zero normal velocity on the particle surface. If we consider a slip velocity (22) expansion of only NN modes and apply the boundary conditions to the stream function expansion (A 5) with only NN terms ranging from n=2n=2 to n=N+1n=N+1, the following system of equations is obtained

gn(τ0)=0,for 2≤n≤N+1,(37)g_n(\tau_0)=0,\qquad\text{for }2\leq n\leq N+1, \tag*{(37)}
∂gn∂τ∣τ=τ0=τ0c2n(n−1)Bn−1,for 2≤n≤N+1.(38)\left.\frac{\partial g_n}{\partial\tau}\right|_{\tau=\tau_0}=\tau_0c^2n(n-1)B_{n-1},\qquad\text{for }2\leq n\leq N+1. \tag*{(38)}

These equations can be separated into a system with coefficients that only have even indices and a system with coefficients that only have only odd indices, as all the indices of CnC_n and DnD_n in gng_n are always the same parity [57]. The odd system of equations always has one more unknown than equation; a solve-able system of equations is obtained by setting

CN+3−m=0,where m={1,when N is odd0,when N is even,(39)C_{N+3-m}=0,\quad\text{where }m=\begin{cases}1, & \text{when }N\text{ is odd}\\0, & \text{when }N\text{ is even}\end{cases}, \tag*{(39)}

for N≥2N \ge2. Upon obtaining the phoretic modes BnB_n using (21) and (23) and using the result given by (A3), the system of equations (A6)–(A7) is solved for the coefficients CnC_n and DnD_n for the zeroth-order velocity field. Interested readers are referred to previous works for further details [59, 57].

Appendix B

Validation of numerical simulations

In this appendix, we include results on the validation of our numerical approach against previously reported findings. First, we follow the numerical implementation described in § 3.2 to simulate the self-propulsion of a spherical Janus particle in a shear-thinning fluid and compare the numerical results with the asymptotic solution obtained by Datt et al. [14] in the weakly nonlinear limit (β=0.99\beta= 0.99). As shown in Figure 8(a), the results display satisfactory agreements for a wide range of CuCu for different active surface coverage, ζ0\zeta_0. Second, we assess the capability of our numerical approach in handling non-spherical geometries by simulating the self-propulsion of spheroidal Janus particles with different eccentricities in a Newtonian fluid and compare the numerical results with the solution obtained by Popescu et al. [59]. As shown in Figure 8(b), the results again agree satisfactorily, validating our numerical implementation.

Figure 8. Validation of numerical approach against previously reported results. (a) Comparison of the numerical results (symbols) on the swimming velocity of a spherical Janus particle as a function of CuCu for different active surface coverage ζ0\zeta_0 with the asymptotic solution (lines) of the scaled first-order swimming velocity (U1/U0U_1/U_0) obtained by Datt et al. [14] in a weakly shear-thinning fluid (β=0.99\beta= 0.99). (b) Comparison of the numerical results (symbols) on the swimming velocity UU of a spheroidal Janus particle as a function of ζ0\zeta_0 for different eccentricities ee with the solution (lines) obtained by Popescu et al. [59] in a Newtonian fluid. Note that the Janus particles simulated here are coated on the bottom to maintain consistency, and correspondingly, we set A=−1A=-1 and M=1M=1 in both (a, b).

References

  1. [1]ANDERSON, JOHN L 1989 Colloid transport by interfacial forces. Annu. Rev. Fluid Mech. 21 (1), 61–99.
  2. [2]ASMOLOV, EVGENY S, NIZKAYA, TATIANA V & VINOGRADOVA, OLGA I 2022 Self-diffusiophoresis of janus particles that release ions. Phys. Fluids 34 (3).DOI
  3. [3]BASKURT, OGUZ K & MEISELMAN, HERBERT J 2003 Blood rheology and hemodynamics. In Seminars in thrombosis and hemostasis, , vol. 29, pp. 435–450. Thieme Medical Publishers, Inc.
  4. [4]Bechinger, Clemens, Di Leonardo, Roberto, Löwen, Hartmut, Reichhardt, Charles, Volpe, Giorgio & Volpe, Giovanni 2016 Active particles in complex and crowded environments. Rev. Mod. Phys. 88 (4), 045006.DOI
  5. [5]Bird, Robert Byron, Armstrong, Robert Calvin & Hassager, Ole 1987 Dynamics of polymeric liquids. vol. 1: Fluid mechanics.
  6. [6]Blake, John R 1971 A spherical envelope approach to ciliary propulsion. J. Fluid Mech. 46 (1), 199–208.DOI
  7. [7]Brown, Aidan & Poon, Wilson 2014 Ionic effects in self-propelled pt-coated janus swimmers. Soft Matter 10, 4016–4027.arxiv.org/abs/1312.4130
  8. [8]Brown, Aidan T, Poon, Wilson CK, Holm, Christian & De Graaf, Joost 2017 Ionic screening and dissociation are crucial for understanding chemical self-propulsion in polar solvents. Soft Matter 13 (6), 1200–1222.DOI
  9. [9]Buttinoni, Ivo, Volpe, Giovanni, Kümmerl, Felix, Volpe, Giorgio & Bechinger, Clemens 2012 Active brownian motion tunable by light. J. Phys.: Condens. Matter 24 (28), 284129.DOI
  10. [10]Champion, Julie A, Katare, Yogesh K & Mitragotri, Samir 2007 Making polymeric micro-and nanoparticles of complex shapes. Proc. Natl. Acad. Sci. 104 (29), 11901–11904.pubmed.ncbi.nlm.nih.gov/17620615
  11. [11]Champion, Julie A & Mitragotri, Samir 2006 Role of target geometry in phagocytosis. Proc. Natl. Acad. Sci. 103 (13), 4930–4934.pubmed.ncbi.nlm.nih.gov/16549762
  12. [12]Choudhary, Akash, Renganathan, Thiruvengadam & Pushpavanam, S 2020 Non-newtonian effects on the slip and mobility of a self-propelling active particle. J. Fluid Mech. 899.DOI
  13. [14]Datt, Charu, Natale, Giovannantonio, Hatzikiriakos, Savvas G & Elfring, Gwynn J 2017 An active particle in a complex fluid. J. Fluid Mech. 823, 675–688.DOI
  14. [15]Datt, Charu, Zhu, Lailai, Elfring, Gwynn J & Pak, On Shun 2015 Squirming through shear-thinning fluids. J. Fluid Mech. 784.DOI
  15. [16]De Corato, Marco, Arqué, Xavier, Patiño, Tania, Arroyo, Marino, Sánchez, Samuel & Pagonabarraga, Ignacio 2020 Self-propulsion of active colloids via ion release: Theory and experiments. Phys. Rev. Lett. 124 (10), 108001.DOI
  16. [17]De Corato, M, Greco, F & Maffettone, PL 2015 Locomotion of a microorganism in weakly viscoelastic liquids. Phys. Rev. E 92 (5), 053008.DOI
  17. [18]Demir, Ebru, Lordi, Noah, Ding, Yang & Pak, On Shun 2020 Nonlocal shear-thinning effects substantially enhance helical propulsion. Phys. Rev. Fluids 5 (11), 111301.DOI
  18. [19]Ebbens, S., Gregory, D. A., Dunderdale, G., Howse, J. R., Ibrahim, Y., Liverpool, T. B. & Golestanian, R. 2014 Electrokinetic effects in catalytic platinum-insulator janus swimmers. Europhys. Lett. 106 (5), 58003.DOI
  19. [20]Elfring, Gwynn J & Lauga, Eric 2015 Theory of locomotion through complex fluids. Complex Fluids Biol. Syst.: Exp., Theory, Comput. pp. 283–317.arxiv.org/abs/1410.4322
  20. [21]Eloul, Shaltiel, Poon, Wilson C. K., Farago, Oded & Frenkel, Daan 2020 Reactive momentum transfer contributes to the self-propulsion of janus particles. Phys. Rev. Lett. 124, 188001.DOI
  21. [22]Fauci, L. J. & Dillon, R. 2006 Biofluidmechanics of reproduction. Annu. Rev. Fluid Mech. 38 (1), 371–394.DOI
  22. [23]Gagnon, David A, Keim, Nathan C & Arratia, Paulo E 2014 Undulatory swimming in shear-thinning fluids: experiments with caenorhabditis elegans. J. Fluid Mech. 758, R3.DOI
  23. [24]Gao, Wei & Wang, Joseph 2014 Synthetic micro/nanomotors in drug delivery. Nanoscale 6 (18), 10486–10494.DOI
  24. [25]Ghosh, A. & Fischer, P. 2009 Controlled propulsion of artificial magnetic nanostructured propellers. Nano Lett. 9 (6), 2243–2245.DOI
  25. [26]Glotzer, Sharon C & Solomon, Michael J 2007 Anisotropy of building blocks and their assembly into complex structures. Nat. Mater. 6 (8), 557–562.pubmed.ncbi.nlm.nih.gov/17667968
  26. [27]van Gogh, Brandon, Demir, Ebru, Palaniappan, D & Pak, On Shun 2022 The effect of particle geometry on squirming through a shear-thinning fluid. J. Fluid Mech. 938.DOI
  27. [28]Golestanian, Ramin, Liverpool, TB & Ajdari, A 2007 Designing phoretic micro-and nano-swimmers. New J. Phys. 9 (5), 126.DOI
  28. [29]Golestanian, Ramin, Liverpool, Tanniemola B & Ajdari, Armand 2005 Propulsion of a molecular machine by asymmetric distribution of reaction products. Phys. Rev. Lett. 94 (22), 220801.
  29. [30]Gómez, Saúl, Godínez, Francisco A, Lauga, Eric & Zenit, Roberto 2017 Helical propulsion in shear-thinning fluids. J. Fluid Mech. 812.DOI
  30. [31]Guo, Hanliang, Zhu, Hai, Liu, Ruowen, Bonnet, Marc & Veerapenani, Shravan 2021 Optimal ciliary locomotion of axisymmetric microswimmers. Journal of Fluid Mechanics 927, A22.DOI
  31. [32]Happel, John & Brenner, Howard 2012 Low Reynolds number hydrodynamics: with special applications to particulate media, , vol. 1. Springer Science & Business Media.
  32. [33]Howse, Jonathan R., Jones, Richard A. L., Ryan, Anthony J., Gough, Tim, Vafabakhsh, Reza & Golestanian, Ramin 2007 Self-motile colloidal particles: From directed propulsion to random walk. Phys. Rev. Lett. 99, 048102.DOI
  33. [34]Hwang, Sh, Litt, M & Forsman, WC 1969 Rheological properties of mucus. Rheol. Acta. 8 (4), 438–448.DOI
  34. [35]Ishimoto, Kenta & Gaffney, Eamonn A 2013 Squirmer dynamics near a boundary. Phys. Rev. E 88 (6), 062702.pubmed.ncbi.nlm.nih.gov/24483481
  35. [36]Jülicher, F. & Prost, J. 2009 Generic theory of colloidal transport. Eur. Phys. J. E 29, 27–36.DOI
  36. [37]Kagan, Daniel, Calvo-Marzal, Percy, Balasubramanian, Shankar, Sattayasamitsathit, Sirilak, Manesh, Kalayil Mian, Flechsig, Gerd-Uwe & Wang, Joseph 2009 Chemical sensing based on catalytic nanomotors: motion-based detection of trace silver. J. Am. Chem. Soc. 131 (34), 12082–12083.
  37. [38]Katsamba, Panayiota, Butler, Matthew D, Koens, Lyndon & Montenegro-Johnson, Thomas D 2022 Chemically active filaments: analysis and extensions of slender phoretic theory. Soft Matter 18 (37), 7051–7063.
  38. [39]Keller, Stuart R & Wu, Theodore Y 1977 A porous prolate-spheroidal model for ciliated micro-organisms. J. Fluid Mech. 80 (2), 259–278.
  39. [40]Lauga, Eric 2014 Locomotion in complex fluids: integral theorems. Phys. Fluids. 26 (8), 081902.DOI
  40. [41]Lauga, E. 2016 Bacterial hydrodynamics. Annu. Rev. Fluid Mech. 48, 105–130.DOI
  41. [43]Lauga, Eric & Powers, Thomas R 2009 The hydrodynamics of swimming microorganisms. Rep. Prog. Phys. 72 (9), 096601.DOI
  42. [44]Leshansky, A M, Kenneth, O, Gat, O & Avron, J E 2007 A frictionless microswimmer. New J. Phys. 9 (5), 145.DOI
  43. [47]Lighthill, J 1975 Mathematical Biofluiddynamics. SIAM, Philadelphia.DOI
  44. [48]Lighthill, MJ 1952 On the squirming motion of nearly spherical deformable bodies through liquids at very small reynolds numbers. Comm. Pure Appl. Math. 5 (2), 109–118.
  45. [49]Michelin, Sébastien & Lauga, Eric 2014 Phoretic self-propulsion at finite Péclet numbers. J. Fluid Mech. 747, 572–604.
  46. [50]Montenegro-Johnson, Thomas D, Smith, David J & Loghin, Daniel 2013 Physics of rheologically enhanced propulsion: Different strokes in generalized stokes. Phys. Fluids. 25 (8), 081903.
  47. [51]Moran, Jeffrey L & Posner, Jonathan D 2017 Phoretic self-propulsion. Annu. Rev. Fluid Mech. 49, 511–540.
  48. [52]Natale, Giovannantonio, Datt, Charu, Hatzikiriakos, Savvas G & Efl­ering, Gwynn J 2017 Autophoretic locomotion in weakly viscoelastic fluids at finite péclet number. Phys. Fluids 29 (12).
  49. [53]Park, Jin-Sung, Kim, Daeyeon, Shin, Jennifer H & Weitz, David A 2016 Efficient nematode swimming in a shear thinning colloidal suspension. Soft Matter 12 (6), 1892–1897.DOI
  50. [54]Patiño, Tania, Arqué, Xavier, Mestre, Rafael, Palacios, Lucas & Sánchez, Samuel 2018 Fundamental aspects of enzyme-powered micro-and nanoswimmers. Acc. Chem. Res. 51 (11), 2662–2671.DOI
  51. [56]Pedley, T. J. 2016 Spherical squirmers: Models for swimming micro-organisms. IMA J. Appl. Math. 81, 488–521.DOI
  52. [57]Poehnl, Ruben, Popescu, Mihail N & Uspal, William E 2020 Axisymmetric spheroidal squirmers and self-diffusiophoretic particles. J. Phys.: Condens. Matter. 32 (16), 164001.DOI
  53. [58]Poehnl, Ruben & Uspal, William 2021 Phoretic self-propulsion of helical active particles. J. Fluid Mech. 927, A46.DOI
  54. [59]Popescu, Mihail Nicolae, Dietrich, S, Tasinkevych, M & Ralston, J 2010 Phoretic motion of spheroidal particles due to self-generated solute gradients. Eur. Phys. J. E 31 (4), 351–367.DOI
  55. [60]Purcell, Edward M 1977 Life at low reynolds number. Am. J. Phys. 45 (1), 3–11.
  56. [61]Qin, Ke, Peng, Zhiwei, Chen, Ye, Nguangia, Herve, Zhu, Lailai & Pak, On Shun 2021 Propulsion of an elastic filament in a shear-thinning fluid. Soft Matter 17 (14), 3829–3839.DOI
  57. [63]Saad, Shabab & Natale, GiovanniAntonio 2019 Diffusiophoresis of active colloids in viscoelastic media. Soft Matter 15 (48), 9909–9919.DOI
  58. [64]Sánchez, Samuel, Soler, Lluís & Katuri, Jaideep 2015 Chemically powered micro-and nanomotors. Angew. Chem. Int. Ed. 54 (5), 1414–1444.DOI
  59. [66]Schweitzer, Frank & Farmer, J. Doyle 2003 Brownian agents and active particles: collective dynamics in the natural and social sciences, , vol. 1. Springer.DOI
  60. [67]Shemi, Onajite & Solomon, Michael J 2018 Self-propulsion and active motion of janus ellipsoids. J. Phys. Chem. B. 122 (44), 10247–10255.DOI
  61. [68]Spagnolie, Saverio E & Underhill, Patrick T 2023 Swimming in complex fluids. Annu. Rev. Condens. Matter Phys. 14, 381–415.DOI
  62. [69]Stone, Howard A & Samuel, Aravinthan D T 1996 Propulsion of microorganisms by surface distortions. Phys. Rev. Lett. 77 (19), 4102.pubmed.ncbi.nlm.nih.gov/10062388
  63. [70]Sznitman, Josué & Arratia, Paulo E 2014 Locomotion through complex fluids: an experimental view. In Complex Fluids Biol. Syst.: Exp., Theory, Comput., pp. 245–281. Springer.DOI
  64. [71]Theers, Mario, Westphal, Elmar, Gompper, Gerhard & Winkler, Roland G 2016 Modeling a spheroidal microswimmer and cooperative swimming in a narrow slit. Soft Matter 12 (35), 7372–7385.DOI
  65. [72]Vélez-Cordero, J Rodrigo & Lauga, Eric 2013 Waving transport and propulsion in a generalized newtonian fluid. J. Non-Newton. Fluid Mech. 199, 37–50.
  66. [73]Wensink, HH, Kantsler, V, Goldstein, RE & Dunkel, J 2014 Controlling active self-assembly through broken particle-shape symmetry. Phys. Rev. E 89 (1), 010302.pubmed.ncbi.nlm.nih.gov/24580155
  67. [74]Yariv, Ehud 2019 Self-diffusiophoresis of slender catalytic colloids. Langmuir 36 (25), 6903–6915.DOI
  68. [75]Zhang, L., Abbott, J. J., Dong, L., Peyer, K. E., Kratochvil, B. E., Zhang, H., Bergeles, C. & Nelson, B. J. 2009 Characterizing the swimming properties of artificial bacterial flagella. Nano Lett. 9 (10), 3663–3667.DOI
  69. [76]Zhou, Chao, Zhang, HP, Tang, Jinyao & Wang, Wei 2018 Photochemically powered agcl janus micromotors as a model system to understand ionic self-diffusiophoresis. Langmuir 34 (10), 3289–3295.DOI
  70. [77]Zhu, Guangpu & Zhu, Lailai 2023 Self-propulsion of an elliptical phoretic disk emitting solute uniformly. J. Fluid Mech. 974, A57.arxiv.org/abs/2304.06776
  71. [78]Zöttl, Andreas & Yeomans, Julia M 2019 Enhanced bacterial swimming speeds in macromolecular polymer solutions. Nat. Phys. 15 (6), 554–558.DOI

Paper details

vlnc:W_yqdubh34
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents