betaFeedback

WorksPhysics and Astronomy

Gaps in Topological Magnon Spectra: Intrinsic vs. Extrinsic Effects

Abstract

For topological magnon spectra, determining and explaining the presence of a gap at a magnon crossing point is a key to characterize the topological properties of the system. An inelastic neutron scattering study of a single crystal is a powerful experimental technique that is widely employed to probe the magnetic excitation spectra of topological materials. Here, we show that when the scattering intensity rapidly disperses in the vicinity of a crossing point, such as a Dirac point, the apparent topological gap size is extremely sensitive to experimental conditions including sample mosaic, resolution, and momentum integration range. We demonstrate these effects using comprehensive neutron-scattering measurements of CrCl3_3. Our measurements confirm the gapless nature of the Dirac magnon in CrCl3_3, but also reveal an artificial, i.e. extrinsic, magnon gap unless the momentum integration range is carefully controlled. Our study provides an explanation of the apparent discrepancies between spectroscopic and first-principles estimates of Dirac magnon gap sizes, and provides guidelines for accurate spectroscopic measurement of topological magnon gaps.

This manuscript has been authored by UT-Battelle, LLC under Contract No. DE-AC05-00OR22725 with the U.S. Department of Energy. The United States Government retains and the publisher, by accepting the article for publication, acknowledges that the United States Government retains a nonexclusive, paid-up, irrevocable, world-wide license to publish or reproduce the published form of this manuscript, or allow others to do so, for United States Government purposes. The Department of Energy will provide public access to these results of federally sponsored research in accordance with the DOE Public Access Plan (http://energy.gov/downloads/doe-public-access-plan).

Magnons in a honeycomb-lattice ferromagnet have an analogous description to the single-orbital tight-binding model for electrons in graphene. As a result, the magnons in a honeycomb ferromagnet exhibit a linear energy-momentum dispersion near a magnon crossing point, often termed a Dirac magnon [Fig. 1] [1, 2, 3]. Observing the Dirac magnon is of intense current interest as a means of assessing potential topological properties. In particular, if spin-orbit coupling (SOC) accompanying a broken inversion symmetry generates a nonzero Dzyalloshinskii–Moriya interaction (DMI), a gap opens at the Dirac crossing point, in close analogy with the spin-orbit-induced semiconducting gap in graphene. This can yield a topologically-protected magnon edge-state with low-dissipation, which results in a non-trivial topological magnon insulator [2, 3, 4, 5]. Consequently, experimentally identifying materials with a topological magnon gap (TMG) is a crucial goal, with wide-ranging implications for spin-transport-based technologies such as magnon spintronics [6, 7, 8].

Several chromium-based (Cr3+^{3+}, S=3/2S=3/2) honeycomb ferromagnetic materials have been proposed to host gapped Dirac magnons, namely CrBr3_3, CrI3_3, and CrMTe3_3 (MM=Si, Ge) [9, 10, 11, 12]. In all of these materials, the key experimental evidence for a TMG has been obtained from single-crystal neutron spectroscopy experiments, which report gaps ∼3\sim3 to 5 meV. However, the origin of the gap opening remains unclear, with proposals including DMI, Kitaev interactions, and magnon-phonon coupling [5, 9, 10, 13] [14, 15]. Furthermore, the estimated gaps based upon the DMI and Kitaev interaction strengths are much bigger than the predicted gap size of first-principle calculations for the small SOC of half-filled t2gt_{2g} orbitals of Cr3+^{3+} [13] [16]. In this context, accurate neutron spectroscopy experiments can be crucial, because they provide a measurement of the magnon dispersion in 4-dimensional momentum-energy (QQ-EE) space that can, in principle, be quantitatively compared with calculations. In practice, however, the weakness of the neutron-sample interaction often requires compromises to increase the signal strength, such as the use of many co-aligned single crystals with increased mosaicity, the relaxation of QQ and EE resolution to gain more neutron flux, and the integration of measured data over a significant range of QQ and EE to improve counting statistics of the measurement. These approaches to enhance signal can result in spurious findings when the neutron intensity rapidly disperses or has a singularity in QQ-EE space as is the case for a Dirac magnon, and this may in turn cause a significant impact on the observation and estimates of the TMG.

In this letter, we present a detailed analysis of extrinsic effects on spectroscopic estimates of TMG sizes. Our key finding is that a dominant extrinsic contribution to the apparent magnon gap occurs if “typical” QQ-integration ranges are used, which can cause the intrinsic TMG to be substantially over-estimated or misdiagnosed. We identify this effect using a simple model. We then present high-resolution neutron spectroscopy measurements on a single crystal of CrCl3_3. Our results establish CrCl3_3 as an ideal quasi-2D Heisenberg ferromagnet with a gapless Dirac magnon, and provide a comprehensive map of the excitation spectrum near the Dirac point. However, we also find that an extrinsic magnon gap appears unless the QQ-integration range is carefully controlled. Finally, we reinterpret published spectroscopic studies of CrBr3_3 [11] and CrSiTe3_3 [12], and show that the apparent magnon gaps in these materials likely contain substantial extrinsic contributions. Our results resolve apparent discrepancies between spectroscopic and first-principles estimates of TMG sizes, and provide guidelines for accurate spectroscopic measurement of topological magnon gaps.

Figure 1 shows calculated magnon spectra for a honeycomb-lattice Heisenberg ferromagnet with nearest-neighbor (n.n.) interaction J1J_1. This model preserves effective time-reversal magnon symmetry and exhibits a gapless Dirac magnon. As shown in Figure 1(a), two cone-shaped dispersions touch at a single location in three-dimensional QQ-EE space. The linear dispersion near the Dirac point is revealed by taking a slice along the [−K,K,0][-K,K,0] direction [Fig. 1(b)]. In practice, it is necessary to integrate the intensity over a finite QQ-range (denoted 2δ2\delta) orthogonal to the slice direction. The gapless Dirac magnon is faithfully reproduced only in the limit δ→0\delta\to0 [Fig. 1(a)]. In contrast, taking δ=0.03\delta= 0.03 r.l.u. yields an apparent gap of size ∼0.5SJ1\sim0.5SJ_1, which is 8% of the full bandwidth of 6SJ16SJ_1 [Fig. 1(b)]. Here, our choice of δ\delta is informed by previous experimental studies, in which “typical” values of δ\delta are between 0.03 and 0.20 r.l.u. [9, 10, 11] [17]. This extrinsic gap occurs because the intensity is averaged over the Dirac cone away from the Dirac point, and is substantial even for small δ\delta because the intensity varies rapidly with QQ. This QQ-integration effect is also distinct from the effect of sample mosaicity such as considered for recent study of CrI3_3 [10], which generates a superposition of off-centered Dirac cones [Fig. 1(c)], and causes an additional artificial gap at the Dirac point [Fig. 1(d)].

Calculated Dirac magnon spectra showing artificial gaps from finite Q-integration range and sample mosaicity

Figure 1. Demonstration of how data processing parameters (QQ-range of integration) and sample mosaicity lead to the appearance of artificial gaps in a gapless Dirac magnon spectrum. (a) Gapless Dirac magnon dispersion for spins SS on a honeycomb lattice with ferromagnetic nearest-neighbor interaction J1J_1. (b) The QQ-EE contour map is obtained by integrating over data within the finite orthogonal QQ-range, 2δ2\delta shown in (a). Due to rapid dispersion away from the crossing point, an artificial gap (ΔK\Delta_K) appears in the spectrum with an apparent size (ΔK\Delta_K, defined as the distance between the two peak centers) that depends on the QQ-integration range. (c) Sample mosaicity generates a broad distribution of off-centered Dirac cones in QQ, and the superposed magnon spectra produces an artificial gap at the KK-point. (d) Calculated Dirac magnon spectra for a 10∘10^\circ sample mosaicity with a δ=0.01\delta=0.01 r.l.u.. Data within the yellow bar are integrated to obtain the energy scan at the KK-point (far right panels).

We investigate extrinsic contributions to the magnon gap using spectroscopic measurements on the van-der-Waals ferromagnet CrCl3_3, which contains undistorted Cr3+^{3+} honeycomb layers below 150 K (space group R3ˉR\bar{3}) [18, 19]. CrCl3_3 has a ferromagnetic spin alignment in the plane in each honeycomb layer below TN=14T_N = 14 K [18]. Compared to CrBr3_3 and CrI3_3, the relatively light Cl ligand atom of CrCl3_3 is likely to give a small SOC and hence anisotropic exchange interactions should also be correspondingly weak and host a gapless Dirac magnon, as suggested by recent neutron-scattering measurements on polycrystalline CrCl3_3 samples [20, 21]. Furthermore, unlike other Cr-halides such as CrI3_3, CrCl3_3 can be grown in as a large single crystal with a small sample mosaic. Consequently, CrCl3_3 is an ideal model system to investigate the impact of extrinsic effects and data treatment on the spin-wave spectrum near the Dirac point.

A CrCl3_3 single crystal with a mosaic <0.68∘< 0.68^\circ was grown by re-crystallization of commercial CrCl3_3 powder [22]. The INS data was collected with the SEQUOIA time-of-flight spectrometer [23] at the Spallation Neutron Source located at Oak Ridge National Laboratory. The Fermi choppers were phased for the high-resolution mode of SEQUOIA for incident energies Ei=4E_i = 4, 11, and 25 meV [24]. Figure 2(a) shows the measured magnon spectra at 5 K (T<TNT < T_N). The spectra are composed of one acoustic and one optical magnon branch with an overall magnon bandwidth of 8 meV (WHKW_{\mathrm{HK}}) in the HKHK-plane. The acoustic magnon emanates from the Γ\Gamma point (0,0,0)(0,0,0), and meets the optical magnon at the K-points, exhibiting typical spin-waves for a ferromagnetic honeycomb lattice [2].

To model the observed magnon spectra, we used linear spin-wave theory (LSWT) using the SpinW package [25]. The spin Hamiltonian was modeled with H=Jn∑i,jSiSj−Dz∑i(Siz)2\mathcal{H} = J_n \sum_{i,j} \mathbf{S}_i\mathbf{S}_j - D^z \sum_i (S_i^z)^2, for S=3/2S = 3/2 of Cr3+^{3+}. We consider Heisenberg (JnJ_n) exchanges up to the third n.n. interactions in the honeycomb plane and an easy-plane single-ion anisotropy (Dz>0D^z > 0). We exclude bond-dependent exchange interactions (Kitaev and Γ\Gamma terms) because these would yield different mode energies at different K-points coupled with the aligned spin direction [26], in disagreement with our experimental data. We also note that the symmetry-allowed second n.n. DMI term cannot generate a magnon gap at the K-point for the in-plane magnetic structure with the symmetry operations of exchange matrix for R3ˉR\bar{3} structure [17]. The inter-layer coupling was assumed to be negligible due to the highly two-dimensional spin-wave dispersion (see [24] for a sensitivity of interlayer coupling in spin-wave analysis). The calculated magnon dispersions from the model Hamiltonian were fitted to the experimental dispersion points extracted by fitting a Gaussian function to the INS spectra. The best fit was for J1=−0.934(5)J_1 = -0.934(5) meV, J2=−0.0302(2)J_2 = -0.0302(2) meV, J3=0.0488(1)J_3 = 0.0488(1) meV, and Dz=0.0100(1)D^z = 0.0100(1) meV [24]. The dominant n.n. ferromagnetic interaction J1J_1 is responsible for the formation of the ferromagnetic honeycomb spin-lattice in CrCl₃. The single-ion anisotropy was found to be nearly zero, indicating a nearly isotropic Cr³⁺ spin. Figure 2(b-Figure 2d) show that the calculated spectra reproduce the measured spectra with high fidelity, demonstrating a quasi-two-dimensional Heisenberg ferromagnetic honeycomb spin-lattice for CrCl₃. The determined Hamiltonian preserves time-reversal symmetry of magnons, resulting in a gapless Dirac magnon at the K-point.

INS spectra and spin-wave calculations for CrCl₃

Figure 2. (a) INS spectra of CrCl₃ measured at T=5T = 5 K (<TN< T_\mathrm{N}) along high-symmetry directions as indicated in the HKHK-reciprocal space map shown in the inset. Data were obtained by integrating over a thickness of Q=0.024Q = 0.024 Å−1^{-1} (0.02 r.l.u. along [H,0,0][H,0,0]) in the HKHK-plane and −2.5≤[0,0,L]≤2.5-2.5 \le[0,0,L] \le2.5 along the out-of-plane direction. (b) Corresponding spin-wave calculations convolved with the energy resolution function of the instrument. Constant energy slices for (c) E=6.0±0.15E = 6.0 \pm0.15 meV and (d) E=2.5±0.15E = 2.5 \pm0.15 meV are compared with the corresponding calculations.

Details of the magnon spectra near the Dirac point are shown in Figure 3. In the figure, the magnon spectra are displayed along the radial QQ-direction (parallel to [H,H,0][H,H,0]) with varying transverse QQ-component ([−K,K,0][-K,K,0]). The separate acoustic and optical modes intersect at the single QQ-position of the Dirac point (13,13,0)\left(\frac{1}{3},\frac{1}{3},0\right). This sharp band touching is viewed as a nodal point at EDirac=4.4E^\mathrm{Dirac} = 4.4 meV in the horizontal QQ-EE slices of the spectra [Figure 3(b)], representing the shape of a Dirac cone dispersion. Deviating from EDiracE^\mathrm{Dirac}, the Dirac point evolves into triangular scattering patterns around K [Figure 2(c,Figure 2d)] with modulating intensity across the Dirac point in energy. The variation in intensity is associated with the isospin locked with offset momentum winding around the Dirac point [26, 27]. As the result, the two conical dispersions having anti-phased winding patterns of intensity meet at the K-point [refer to Figure 1(a)]. When QQ is perpendicular to the radial-direction, the two bands have an identical magnon structure factor, and the Dirac magnon reveals a clear band crossing, as shown in Figure 3(c), evidencing a gapless Dirac magnon in CrCl₃.

Q-E slices, constant-energy slices, and comparisons of experimental and calculated spectra near a Dirac point

Figure 3. (a) QQ-EE slices along [H,H,0][H,H,0]-directions at K=−0.05K=-0.05, 00, 0.050.05, 0.10.1, and 0.150.15 for [−K,K,0][-K,K,0]. Data were obtained by integrating over −0.01≤K≤0.01-0.01 \le K \le0.01 and −2.5≤L≤2.5-2.5 \le L \le2.5. The dashed lines connect ends of acoustic and optical magnon bonds varying with [−K,K,0][-K,K,0], which shows a crossing of two magnon bands at a Dirac point, K=(13,13,0)K=(\frac{1}{3},\frac{1}{3},0). (b) Constant energy slices of the INS spectra. The dashed lines indicate energy evolution of acoustic and optical magnons along the transverse QQ-direction near the Dirac point. (c-d) Opening an artificial gap at crossing point, (23,−13,0)(\frac{2}{3},-\frac{1}{3},0), with increasing integration range, dQrad\mathrm{d}Q^{\mathrm{rad}}. The spectra were collected using high resolution mode for Ei=11E_i=11 meV with the SEQUOIA spectrometer, and obtained by integrating over (c) dQrad=±0.01\mathrm{d}Q^{\mathrm{rad}}=\pm0.01 r.l.u., (d) dQrad=±0.03\mathrm{d}Q^{\mathrm{rad}}=\pm0.03 r.l.u., and (e) dQrad=±0.06\mathrm{d}Q^{\mathrm{rad}}=\pm0.06 r.l.u. (0.020.02, 0.060.06, 0.130.13 Å−1^{-1}, respectively). The energy-resolution convolved spin-wave spectra are compared in the second and third rows, and are calculated for the identical QQ-integration range as the experimental data. The constant QQ-scans at the Dirac point were compared by integrating over dQtrans=±0.02\mathrm{d}Q^{\mathrm{trans}}=\pm0.02 r.l.u. (a yellow bar in the contour map). The blue bar is the instrumental resolution at EDirac=4.4E^{\mathrm{Dirac}}=4.4 meV. The peak positions and full-width-at-half maximum are quantified by Gaussian fits and exhibited as points with error-bars, respectively, as a function of dQrad\mathrm{d}Q^{\mathrm{rad}} in (f). The distance between the positions indicate the apparent gap size.

As described above, a focal issue in the search for topological properties of the magnon spectrum is identifying the presence of an intrinsic gap (TMG) at the K-point. Here we investigate the impact of QQ-integration range on the spectrum near the Dirac point in CrCl₃. Figure 3(c)-(Figure 3e) show the results of the differently histogrammed spectra in the vicinity of the K-point while varying the orthogonal momentum-integration range, dQrad\mathrm{d}Q^\mathrm{rad} (see Figure 3(b) for dQrad\mathrm{d}Q^\mathrm{rad}). For dQrad=±0.01\mathrm{d}Q^\mathrm{rad} = \pm0.01, the experimental spectrum shows a gapless feature [Figure 3(c)]. However, a slightly wider integration range with dQrad=±0.03\mathrm{d}Q^\mathrm{rad} = \pm0.03 opens an apparent gap with ΔK∼0.7\Delta_K \sim0.7 meV (∼0.09WHK\sim0.09 W_{HK}) [Figure 3(d)] and the apparent gap size increases with ΔK∼1.3\Delta_K \sim1.3 meV (0.16WHK0.16 W_{HK}) for dQrad=±0.06\mathrm{d}Q^\mathrm{rad} = \pm0.06 [Figure 3(e)] (see Figure 3(f) for dQrad\mathrm{d}Q^\mathrm{rad} dependence of the gap size). The measured spectra are directly compared to the spin-wave calculation from the obtained Hamiltonian parameters, reflecting the resolution function of the SEQUOIA spectrometer for the identical momentum integration ranges. The good agreement between calculations and experiment demonstrates that the apparent gap is fully explained by the choice of QQ-integration range. This artificial gap consistently appears in the radial QQ scan for dQtrans\mathrm{d}Q^\mathrm{trans} range, reflecting the conical shape of dispersion. It is worth noting that this apparent gap exhibits a finite spectral intensity within the gap, where the instrumental resolution is smaller than the apparent gap size, which is in contrast to the TMG case showing zero intensity between the peak splitting [24]. Therefore, to clarify TMG, careful comparison of the measured data to the energy-resolution convolved spin-wave calculation including momentum integration range should be performed.

The discussion above has important implications for the ongoing debate regarding the observations of the Dirac magnon gap in other chromium van der Waals honeycomb ferromagnets. The previously used momentum integration range and a large sample mosaic for CrBr3_3 (dQtrans=±0.2\mathrm{d}Q^{\mathrm{trans}}=\pm0.2) and CrI3_3 (sample mosaic =8∼17∘=8\sim17^\circ), respectively, are likely to cause a large extrinsic gap contribution [9, 10, 11], thus the TMGs are possibly overestimated. Figure 4(a) shows the calculated INS spectrum of the spin-wave spectra for CrBr3_3 [11], including the QQ-integration range and instrumental resolution used in Ref. [11]. This calculation assumes only Heisenberg interactions (J1=−1.48J_1=-1.48 meV, J2=−0.08J_2=-0.08 meV, J3=0.11J_3=0.11, and Dz=−0.02D^z=-0.02 meV) from Ref. [11] with zero DMI. For simplicity, the sample mosaic was assumed to be zero. The resulting spectrum shows the upper and lower magnon spectra having decreased intensities near the Dirac points (K1K_1, K2K_2), which reproduces the observed magnon dispersion in Ref. [11]. Noticeably, most of the observed gap, corresponding to the peak splittings ∼4\sim4 meV, in the energy scans at K1K_1 and K2K_2 is explained by the orthogonal momentum integration range effect on a pure Heisenberg model, without DMI. As a consequence, the size of the gap at the Dirac point is likely overestimated.

Calculations of INS spectra for topological magnon candidates, considering extrinsic effects

Figure 4. Calculations of INS spectra for topological magnon candidates, considering extrinsic effects. (a) Calculated spectra for time-of-flight spectrometer experiment for CrBr3_3 [11]. Spin-waves were calculated for only the Heisenberg Hamiltonian parameters considering the integration range dQtrans=0.2dQ^{\mathrm{trans}} = 0.2 r.l.u. (0.23 A˚−10.23\,\mathrm{\mathring{A}}^{-1}). (b) Calculated energy scans at K1K_1 and K2K_2. (c) Calculated spectra for a triple-axis spectrometer experiment for CrSiTe3_3 [12]. The spin-wave spectrum was calculated for only the Heisenberg parameters, and convolved with the instrumental energy resolution function for the experimental conditions presented in Ref. [12]. The simulated resolution ellipse functions at the K-points at EDirac=10E^{\mathrm{Dirac}} = 10 meV are indicated with gray ellipse. The K-points are divided into ‘focus’ and ‘defocus’ regions according to the coupling status of the dispersion and resolution ellipse, and the energy scans simulated at K1focusK_1^{\mathrm{focus}}, K2defocusK_2^{\mathrm{defocus}}, and K2defocusK_2^{\mathrm{defocus}} are compared in (d).

In contrast to time-of-flight spectroscopy measurement on Cr trihalides, topological magnon candidates CrMTe3_3 (M=Si,GeM=\mathrm{Si},\mathrm{Ge}) were measured using triple-axis spectrometers [12]. For triple-axis measurements, integration ranges are not a concern but resolution effects can be significant, particularly when horizontal focusing is used. Therefore, the observed spectra are strongly coupled with the shape of the resolution function (gray ellipse in Figure 4(c)). Figure 4(c) exhibits newly calculated spin-wave spectra for CrSiTe3_3 [12], including the resolution calculation for the experiment using Reslib [28]. For the spin-wave calculation, we used only Heisenberg spin Hamiltonian parameters (J1=−1.49J_1=-1.49 meV, J2=−0.15J_2=-0.15 meV, Jc1=−0.07J_{c1}=-0.07, Jc2=−0.06J_{c2}=-0.06, and Dz=−0.01D^z=-0.01 meV, from Ref. [12]) with zero DMI. As can be seen, while the gapless Dirac dispersion parallel to the ellipse (focused) at K1focusK_1^{\mathrm{focus}} leads to a single peak (gapless), the Dirac dispersions anti-parallel to the ellipse (defocused) at K1defocusK_1^{\mathrm{defocus}} decaying phonon spectra [30], where similar effects may be anticipated.

Acknowledgments

We thank Yixi Su for providing their experimental conditions and Michael E. Manley for useful discussions. This research was supported by the U.S. Department of Energy, Office of Science, Basic Energy Sciences, Materials Science and Engineering Division. Work at the Oak Ridge National Laboratory Spallation Neutron Source was supported by U.S. DOE, Office of Science, BES, Scientific User Facilities Division.

and K2defocusK_2^{\mathrm{defocus}} lead to an apparent gaps in the constant QQ-scans [Figure 4(d)]. In this case, the defocused resolution condition plays similar role to the orthogonal QQ-integration range in Figure 3. Confirming the TMG in CrMMTe3_3 (MM=Si,Ge) requires quantitative comparison of the data and the fully resolution-convolved simulation. Assuming that the data in Ref. [12] (Fig.2H) was measured at the focused K1K_1 (13,13,3\frac{1}{3},\frac{1}{3},3) and defocused K2K_2 (23,23,3\frac{2}{3},\frac{2}{3},3), our new resolution-convolved spin-wave simulations suggest a DMI∼0.06\sim0.06 meV that is a half of the value reported in Ref. [12] (see [24] for details).

In conclusion, revealing and understanding topological magnons are important steps towards the realization of magnon-based electronic devices as well as for the fundamental goal of discovering a topological magnon insulator. To meet these challenges, accurately clarifying and estimating an intrinsic Dirac magnon gap is a critical issue in defining the topological properties, and INS experiments play a key role in this endeavor. In particular, our study provides important guidance for spectroscopic measurements of systems having a singularity or a band crossing where the spectrum rapidly disperses in momentum space. We have shown that instrumental and data-processing effects can introduce an artificial gap, so that accurate estimation of the topological gap size requires careful data histograms and comparison with resolution-convolved calculations. Our results are relevant not only to Dirac magnon gaps, but also to similar Weyl magnon, determining avoided crossing of rattler modes to acoustic phonons [29], and quantifying the life-time of rapidly

Supplemental material for “Gaps in Topological Magnon Spectra: Intrinsic vs. Extrinsic Effects”

Seung-Hwan Do; Joe A. Paddison; Gabriele Sala; Travis J. Williams; Koji Kaneko; Keitaro Kuwahara; A. F. May; Jiaqiang Yan; Michael A. McGuire; Matthew B. Stone; Mark D. Lumsden; Andrew D. Christianson

Experimental Details and Spectral Simulation Methods

A single piece of CrCl3_3 single crystal (mass: 0.88 g and dimension: 12×12×412 \times12 \times4 mm2^2) was aligned with [H,K,0][H,K,0] in the horizontal scattering plane for the inelastic neutron scattering (INS) measurements (see Figure S1). The sample was sealed within an aluminum can under an atmosphere of helium exchange gas at room temperature. Figure S1 and (c) show the elastic scattering for the (H,K,1)(H,K,1) and (H,0,L)(H,0,L) planes. Sharp magnetic reflections appear as magnetic satellite peaks with the ordering wave vector Qm=(0,0,32)\mathbf{Q}_{m}=(0,0,\frac{3}{2}) in the R3ˉR\bar{3} rhombohedral crystal structure, representing the alternative magnetic stacking order of the ferromagnetic honeycomb lattice. The rocking scan for Q=(3,0,0)Q=(3,0,0) Bragg reflection was fitted with a Gaussian function, as shown in Figure S1, which gives the full-width at half-maximum (FWHM) ∼0.68∘\sim0.68^\circ, indicating the sample mosaicity is smaller than ∼0.68∘\sim0.68^\circ.

Aligned CrCl3 single crystal, elastic scattering patterns, and rocking scan

Figure S1. (a) A picture of aligned CrCl3_3 single crystal used for INS measurements. Elastic scattering for (b) [H,K,1][H,K,1] and (c) [H,0,L][H,0,L] were obtained from SEQUOIA using Ei=25E_i=25 meV. Nuclear reflections appear at −H+K+L=3m-H+K+L=3m (m=m=integer) with reverse-obverse twins for R3ˉR\bar{3} structure. Magnetic reflections appear with a propagation vector Qm=(0,0,32)\mathbf{Q}_{m}=(0,0,\frac{3}{2}). The ring-patterns are scattering from the aluminum sample holder. (d) A rocking scan for the Bragg reflection at Q=(3,0,0)Q=(3,0,0) using Ei=60E_i=60 meV. The solid line is the Gaussian fit to the data.

The INS data were obtained at T=5T=5 K using the SEQUOIA time-of-flight spectrometer located at the Oak Ridge National Laboratory (ORNL). The Fermi chopper was set to 120 Hz, 180 Hz, and 240 Hz for Ei=4E_i=4, 11, and 25 meV, which give FWHM = 0.11, 0.24, and 0.65 meV of resolution at the elastic line (E=0E=0 meV), respectively. For Ei=25E_i=25 meV, measurements were performed by rotating the sample through 180∘180^\circ about its vertical axis with 0.5∘0.5^\circ steps. For Ei=11E_i=11 meV, measurements were performed by rotating the sample 2∗50∘2 * 50^\circ with 1∘1^\circ step covering two K-points at (−1,2,0)(-1,2,0) and (2,−1,0)(2,-1,0) (see Figure S2). The Ei=4E_i=4 meV data was measured by rotating the sample through 35∘35^\circ about its vertical axis to cover QQ along the [H,0,0][H,0,0]-direction. Data were reduced and analyzed using the Mantid [1], Dave [2], and Horace [3] software packages.

Comparison of INS data with and without symmetrization

Figure S2. Comparison of INS data for Ei=11E_i=11 meV with and without symmetrization. (a) The unsymmetrized constant energy slice data for E=[2.85,3.15]E=[2.85,3.15] meV and (b) corresponding symmetrized data. Unsymmetrized transverse QQ-scans for the two K-points at (c) Q=(−13,23,0)Q=(-\frac{1}{3},\frac{2}{3},0) and (d) Q=(23,−13,0)Q=(\frac{2}{3},-\frac{1}{3},0) and (e) corresponding symmetrized data at (23,−13,0)(\frac{2}{3},-\frac{1}{3},0) were obtained by integrating over dQrad=±0.01\mathrm{d}Q^{\mathrm{rad}}=\pm0.01 and −2.5≤L≤2.5-2.5\leq L\leq2.5.

Spin-wave spectra were calculated using the SpinW package [4]. In comparison to measured spectra, the orthogonal integration range dQdQ was accounted for by averaging over the resolution convoluted QQ-EE spectra at ∼10\sim10 Q-points per 0.01 Å−1^{-1} within the range. The triple-axis spectroscopy simulations shown in Figure 4(c)(Figure 4d) of the main text were performed using ResLib [5] with the resolution function calculation using the Popovici method [6] using the experimental parameters of the IN8 spectrometer used in Ref. [7].

Data Symmetrization and Confirmation of Gapless Dirac Magnon

While unsymmetrized data was used for Ei=25E_i=25 meV to analyze the linear spin-wave theory and to make figures shown in the main text, Ei=11E_i=11 meV and 4 meV data were symmetrized using symmetry operations of the Laue class of the R3ˉR\bar{3} to enhance statistics. Figure S2 shows a comparison between unsymmetrized and symmetrized data for Ei=11E_i=11 meV. The shown magnon spectra in the symmetrized data exhibit the same QQ-EE pattern as the unsymmetrized data, but the signal to noise ratio is improved.

Spin-wave fitting results and determination of the Hamiltonian parameters

Experimental dispersions were extracted by fitting Gaussian functions to the constant momentum scans for Ei=25E_i=25 meV and 11 meV data along the high symmetry directions (see Figure S3). 570 dispersion points were obtained from the both Ei=11E_i=11 and 25 meV energy spectra (filled circles in Figure S3), and used for fitting the spin-wave dispersions for the spin Hamiltonian model [Figure S3],

Magnetic structure, constant momentum scans, dispersion comparison, extracted intensity, and chi-squared dependence

Figure S3. (a) Magnetic structure and exchange paths for CrCl3_3. Ferromagnetic moments are aligned in the abab-plane and antiferromagnetically stacked along the cc-axis. The exchange paths are labeled. (b) Constant momentum scans at the high symmetry points in the Brillouin zone (dots). The black solid lines indicate the Gaussian fitting results on the elastic (E=0E=0) and inelastic (E≠0E\ne0) excitation peaks. (c) Comparison between experimental dispersion points from Ei=25E_i=25 meV (blue filled circles) 11 meV (pink filled circles) and calculated dispersion (solid purple line) from the best fitting result. (d) Extracted intensity of acoustic (violet dot) and optical (red dot) modes and comparison to LSWT calculation (solid line). The black arrow indicates the intensity at the K-point. (e) The χ2\chi^2 value as a function of the JintJ_{\mathrm{int}} interaction strength. The black solid line indicates the parabolic fitting result.

H0=J1∑ijSiSj+J2∑ijSiSj+J3∑ijSiSj+Jint∑ijSiSj−Dz∑i(Siz)2.(1)\mathcal{H}_0=J_1\sum_{ij}S_iS_j+J_2\sum_{ij}S_iS_j+J_3\sum_{ij}S_iS_j+J_{\mathrm{int}}\sum_{ij}S_iS_j-D^z\sum_i(S_i^z)^2. \tag*{(1)}

This Hamiltonian model describes Heisenberg exchanges up to third nearest neighbor (n.n.) interactions (JnJ_n) in a honeycomb layer, Heisenberg n.n. inter-layer interaction (JintJ^{\mathrm{int}}) along cc-axis, and easy-plane single-ion anisotropy (Dz>0D^z>0) (see Figure S3 for the exchange paths). Due to the highly two-dimensional magnon spectra, out-of-plane spin interactions were assumed to be negligible and for simplicity Jint=0.001J_{\mathrm{int}}=0.001 meV was used to stabilize the antiferromagnetic layer order (see below for sensitivity of the χ2\chi^2 on JintJ_{\mathrm{int}}).

For fitting the spin-wave dispersion, the χ2\chi^2 optimization function was defined as following,

χ2=1n∑i(Eiobs−Eicalc.)2σi2,(2)\chi^2=\frac{1}{n}\sum_i\frac{(E_i^{\mathrm{obs}}-E_i^{\mathrm{calc.}})^2}{\sigma_i^2}, \tag*{(2)}

where EiobsE_i^{\mathrm{obs}} and EicalcE_i^{\mathrm{calc}} indicate observed and calculated dispersion energies, and nn and σi\sigma_i indicate the number of dispersion points and standard deviation in the observed dispersion. The fitting of the Hamiltonian parameters to minimize the χ2\chi^2 was performed using the algorithm implemented in the SpinW package [4]. The comparison of the calculated dispersion for the optimized parameters to experimental dispersion is shown in Figure S3, and shows a good agreement. In addition, Figure S3 shows a comparison of the extracted magnon scattering intensity with the spin-wave calculation: the good agreement indicates the existence of isotropically or randomly

distributed magnetic domains in the plane without preferred orientation.

To check the sensitivity of the inter-layer interaction to the obtained parameters, Fig. S3(e) shows the χ2\chi^2 values of the dispersion points as a function of the JintJ_{\mathrm{int}} interaction strength with fixed other parameters. The antiferromagnetic interaction was only considered to stabilize the alternative stacking order ground state. The minimum χ2\chi^2 appears near Jint∼0J_{\mathrm{int}}\sim0 meV, and the χ2\chi^2 shows parabolic increase with increasing JintJ_{\mathrm{int}}. The graphical errorbar estimation on the local χ2\chi^2 minimum gives the error of JintJ_{\mathrm{int}} with ∼0.13\sim0.13 meV [8], corresponding to the sensitivity of the parameter on the spin-wave fitting result. Due to the small number of interaction paths for JintJ_{\mathrm{int}} (number of interactions on a single spin: #Jint=1\#J_{\mathrm{int}}=1) Figure S3, the spin-wave can be less-sensitive to varying the JintJ_{\mathrm{int}}, compared to other exchanges paths for fixed values of exchange (#J1=3\#J_1=3, #J2=6\#J_2=6, and #J3=3\#J_3=3).

Low Energy Magnon Spectra: Gapless Dispersion at Γ\Gamma-Point and Dispersion-Less Spin-Wave Along LL

The low-energy spectra near the zone center (ZC) shown in Figure S4 reveals a quadratic dispersion as expected for a ferromagnetic spin-wave, E∝AQ2+ΔΓE\propto AQ^2+\Delta_{\Gamma}, where AA and ΔΓ\Delta_{\Gamma} are the spin-wave stiffness and magnon gap at the ZC. The low-energy magnon dispersion for energy transfers less than 1.2 meV, measured in the Ei=4E_i=4 meV configuration, were fitted with the function, which yields A=17.14(49)A=17.14(49) and ΔΓ=0.00(1)\Delta_{\Gamma}=0.00(1) meV. The resulting gapless (Goldstone) mode (ΔΓ∼0\Delta_{\Gamma}\sim0 meV) indicates the preserved U(1) symmetry of Cr spins. This gapless feature is in contrast to the other chromate trihalide materials [9, 10], which emphasizes the importance of the ligand atom’s SOC in determining the magnetic anisotropy of the systems [11]. Figure S4 shows no discernible dispersion along [0.12,0,L][0.12,0,L] near the ZC. Also, no dispersion along [0,0,L][0,0,L] through the ZC is detected within instrumental resolution (FWHM = 0.24 meV at E=0E=0 meV for Ei=11E_i=11 meV) [Fig. S4(c)]. The bandwidth along the LL-direction is smaller than the instrumental resolution WL<FWHM/2∼0.12W_L<\mathrm{FWHM}/2\sim0.12 meV, corresponding to less than 1.5% of WHKW_{HK}, indicating highly two-dimensional spin interactions in CrCl3_3.

Low-energy magnon spectra near the magnetic zone center

Figure S4. (a) Low-energy spectrum near the magnetic zone center at Γ\Gamma (0,0,0) along [H,0,0]. The low-energy dispersion points and its energy line-widths were extracted by Gaussian fits to the constant momentum scans and are exhibited as points with vertical error-bars. The horizontal error-bars indicate integration range for the constant momentum scans. Solid line indicates a gapless biquadratic ferromagnetic spin-wave dispersion, E∝AQ2+ΔΓE\propto AQ^2+\Delta_{\Gamma}. (b) Magnon spectra along [0.12,0,L] with integration range marked by the bar in (a). (c) Low-energy spectrum near the magnetic zone centers at Q=(−1,2,−23)Q=(-1,2,-\frac{2}{3}), (−1,2,0)(-1,2,0), and (−1,2,23)(-1,2,\frac{2}{3}) along [0,0,L].

Dirac Magnon Along the Radial Direction

In this section, we investigate the Dirac magnon spectra along a radial direction through the K-point with different orthogonal QQ-integration ranges dQtrans=±0.05dQ^{\mathrm{trans}}=\pm0.05 r.l.u. and ±0.2\pm0.2 r.l.u. (see Figure 2(b) in the main text for definition of dQtransdQ^{\mathrm{trans}}). These dQtransdQ^{\mathrm{trans}} values are typical QQ-integration ranges that were used for Ref. [7, 12]. Figure S5 shows the magnon spectra along the [2H,−H,0][2H,-H,0]-direction (equivalent direction to the [H,H,0][H,H,0]-direction) for the different dQtransdQ^{\mathrm{trans}} sizes. As the dQtransdQ^{\mathrm{trans}} increases, the magnon dispersion appears to open a gap at the K-point, (23,−13,0)(\frac{2}{3},-\frac{1}{3},0); while the constant momentum scan for dQtrans=0.01dQ^{\mathrm{trans}}=0.01, the data for dQtrans=±0.05dQ^{\mathrm{trans}}=\pm0.05 shows two separated peaks with gap ΔK∼0.5\Delta_K\sim0.5 meV. The measured spectra were compared to the spin-wave calculations for the determined Hamiltonian parameters in the Figure S5(Figure S5), and the observed gapless and gaped spectra for dQtrans=±0.01dQ^{\mathrm{trans}}=\pm0.01 and ±0.05\pm0.05 are closely reproduced by the pure Reisenberg model (J1−J2−J3J_1-J_2-J_3 model). These results confirm that the orthogonal integration range for the radial QQ-direction produces an extrinsic gap, same as the transverse direction discussed in the main text.

Dependence of the apparent scattering at the Dirac point along radial $Q$-direction on the range of momentum integration

Figure S5. Dependence of the apparent scattering at the Dirac point along radial QQ-direction on the range of momentum integration. (a-c) The INS spectra were measured using high resolution mode with Ei=11E_i = 11 meV with the SEQUOIA spectrometer, with varying the orthogonal momentum integration range dQtrans=±0.01dQ^{\mathrm{trans}} = \pm0.01, 0.05, and 0.2 r.l.u. (0.012, 0.061, 0.244 Å−1^{-1}, respectively) and −2.5≤L≤2.5-2.5 \le L \le2.5 r.l.u.. The spin-wave spectra were calculated for the determined Hamiltonian of the J1−J2−J3J_1-J_2-J_3 model (d-f) and the J1−J2−J3−A2zJ_1-J_2-J_3-A_2^z model (g-i) with the identical QQ-integration ranges. Blue bars in the figure indicate the instrumental resolution at EDiracE^{\mathrm{Dirac}}.

On the other hand, the momentum integration range dQtrans=±0.2dQ^{\mathrm{trans}}=\pm0.2 covers nearly half of the Brillouin zone, and the obtained spectra may not reflect the localized spectrum near the K-point. Thus, the shown spectra in Figure S5 and (f) show a very broadened excitation due to the widely averaged spectral weight of the acoustic and optical modes. Accordingly, the constant momentum scan shows two broad peaks with a separation of ∼3\sim3 meV for the gapless spin-wave model, which represents spectral centers of the averaged acoustic and optical modes’ spectral weights, not corresponding to the Dirac magnon gap. Therefore, such a large momentum integration range should not be used to investigate the Dirac magnon spectra.

To compare the observed apparent gap with an intrinsic magnon gap arising from the well-known topological magnon example, we assumed a ferromagnetic spin structure aligned along the cc-axis, same as in the CrBr3_3, CrI3_3, and CrMTe3_3 (M=Si,Ge), and introduced the second n.n. DMI (A2zA_2^z) along the zz-axis to the original spin Hamiltonian model (H0\mathcal{H}_0). Then, the new Hamiltonian (H1\mathcal{H}_1) is

H1=H0+∑ijA2z⋅(Si×Sj).(3)\mathcal{H}_1 = \mathcal{H}_0 + \sum_{ij} A_2^z \cdot(\mathbf{S}_i \times\mathbf{S}_j). \tag*{(3)}

Here we considered A2z=J2=0.03A_2^z = J_2 = 0.03 meV, corresponding to ∼3%\sim3\% of J1J_1, and the resulting spin-wave calculations are exhibited in Figure S5-Figure S5). The DMI breaks the time-reversal symmetry of magnon, which results in a clear peak splitting from an intrinsic gap for all the orthogonal QQ integration values [13].

Noticeably, this intrinsic magnon gap features almost zero scattering intensity at the EDiracE^{\mathrm{Dirac}} regardless of the size of the momentum integration range, in contrast to the pure Heisenberg J1−J2−J3J_1-J_2-J_3 model. This further indicates how the intrinsic gap and the spurious gap can appear differently in the measured spectra where energy resolution is sufficiently smaller than the intrinsic magnon gap.

REINTERPRETATION OF DMI SIZE IN CRSITe3_3

In this section, we discuss the previously published triple-axis neutron spectroscopy results of CrSiTe3_3 [7]. As described in the main text, the spectrum at the K-point depends strongly on the shape of the resolution function. Figure S7 demonstrates how the resolution ellipses couple to magnon dispersions at the K-points and how it determines the focused and defocused regions. We assumed that the collected constant momentum scan at K1_1 in Ref. [7] was measured in the focused region, and compare the experimental data with spectrum simulated with varying DMI in accurate resolution-convolved spin-wave calculations for CrSiTe3_3.

Resolution ellipses and coupling to magnon dispersions

Figure S7. Resolution ellipses and coupling to magnon dispersions for constant momentum scans at (a) K1focusK_{1}^{\mathrm{focus}}, (b) K2defocusK_{2}^{\mathrm{defocus}}, (c) K1defocusK_{1}^{\mathrm{defocus}}, and (d) K2focusK_{2}^{\mathrm{focus}} for the IN8 triple-axis spectrometer experiment for CrSiTe3\mathrm{CrSiTe}_{3} [7]. At each energy transfer plotted, the solid (dashed) ellipses correspond to the projection (section) of the resolution function onto the QxQ_x-EE plane. The solid lines are magnon dispersions of CrSiTe3\mathrm{CrSiTe}_{3}. The red thick dashed lines and think ellipses indicate intense magnon modes and resolution functions coupled with the magnons at K-points. As a result of the coupling, the K-points are divided into ‘focus’ and ‘defocus’ regions according to whether the intense dispersion is parallel to and anti-parallel to the ellipse, respectively.

Figure S6 shows the simulated spin-wave spectra for CrSiTe3_3 [7], including the resolution calculation for the experiment using Reslib [5]. For the spin-wave calculation, we used Heisenberg spin Hamiltonian parameters (J1=−1.49J_1=-1.49 meV, J2=−0.15J_2=-0.15 meV, Jc1=−0.07J_{c1}=-0.07, Jc2=−0.06J_{c2}=-0.06, and Dz=−0.01D^z=-0.01 meV) from Ref. [7] with the second n.n. DMI = 0 meV, 0.06 meV, and 0.12 meV. Figure S6 (a-c) compare the resulting simulations with the experimental data at K1_1 (13,13,3\frac{1}{3},\frac{1}{3},3) and K2_2 (23,23,3\frac{2}{3},\frac{2}{3},3). For the zero DMI model, the simulated constant momentum scan at K1_1 (focused region) shows a single peak corresponding to a gapless Dirac magnon spectrum (solid blue line in Figure S6), but its line shape is narrower than data, the simulated intensity is shifted to lower energies, and it does not explain the peak splitting observed in the experimental data (blue filled circles).

Comparison of calculated spectra with varying DMI size and experimental data

Figure S6. Comparison of calculated spectrum with varying DMI size and experimental data from a triple-axis spectrometer experiment for CrSiTe3_3 [7]. The blue (red) filled circles are experimental constant momentum scan data at K1_1 (13,13,3\frac{1}{3},\frac{1}{3},3) (K2_2 (23,23,3\frac{2}{3},\frac{2}{3},3)), digitized from Ref.[7]. (a-c) The blue and red solid lines are calculated spectrum at K1_1 (13,13,3\frac{1}{3},\frac{1}{3},3) and K2_2 (23,23,3\frac{2}{3},\frac{2}{3},3), respectively for the Heisenberg Hamiltonian parameters with DMI from 0 meV to 0.12 meV as described in the text, including instrumental resolution-convolution of the experimental conditions used in Ref.[7]. (d-h) The blue and red solid lines are calculated spectrum at K1_1 (0.35, 0.35, 3) and K2_2 (23,23,3\frac{2}{3},\frac{2}{3},3).

For non-zero DMI, the calculated spectrum opens a gap which generates two peaks, and the size of the gap increases as the strength of DMI increases. However, we note that the line shape of the simulated peaks for all the DMI values up to 0.12 meV do not match the experimental data: the intensity ratio between lower and upper magnon bands is reversed when compared to the experimental data. In practice, the measured wave vector can slightly deviate from exact K-point, (13,13,3\frac{1}{3},\frac{1}{3},3), or the crystal can be slightly mis-aligned. To obtain better agreement with the data, we also simulate the spectrum at Q=(0.35,0.35,3)Q=(0.35,0.35,3). The simulated spectrum at this wave vector better reproduces not only the measured peak intensity distribution but also line shape observed for K1focus_1^{\mathrm{focus}}. Through a qualitative comparison with experimental data, we found that DMI = 0.06 meV provides a good description of the observed peak splitting and line shape (Figure S6). On the other hand, in the K2_2 defocused region, the line shape is much less-sensitive to the DMI value and both 0 meV and 0.06 meV provide good agreement with the data. We note that 0.12 meV (the estimated best parameter in Ref. [7] does not provide good agreement with the data.

References

  1. [1]O. Arnold, J. Bilheux, J. Borreguero, A. Buts, S. Campbell, L. Chapon, M. Doucet, N. Draper, R. Ferraz Leal, M. Gigg, V. Lynch, A. Markvardsen, D. Mikkelson, R. Mikkelson, R. Miller, K. Palmen, P. Parker, G. Passos, T. Perring, P. Peterson, S. Ren, M. Reuter, A. Savici, J. Taylor, R. Taylor, R. Tolchenov, W. Zhou, and J. Zikovsky, Mantid—Data analysis and visualization package for neutron scattering and μSR experiments, Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 764, 156 (2014).DOI
  2. [2]R. Azuah, L. Kneller, K. Qiu, P. Treganna-Piggott, C. Brown, J. Copley, and R. Dimeo, Dave: A comprehensive software suite for the reduction, visualization, and analysis of low energy neutron spectroscopic data, J. Res. Natl. Inst. Stand. Technol. 114, 341 (2009).pubmed.ncbi.nlm.nih.gov/27504233
  3. [3]R. Ewings, A. Buts, M. Le, J. Van Duijn, I. Bustinduy, and T. Perring, Horace: software for the analysis of data from single crystal spectroscopy experiments at time-of-flight neutron instruments, Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 834, 132 (2016).DOI
  4. [4]S. Toth and B. Lake, Linear spin wave theory for single-q incommensurate magnetic structures, Journal of Physics: Condensed Matter 27, 166002 (2015).DOI
  5. [5]E. Farhi, Y. Debab, and P. Willendrup, iFit: A new data analysis framework. Applications for data reduction and optimization of neutron scattering instrument simulations with McStas, Journal of Neutron Research 17, 5 (2014).
  6. [6]M. Popovici, On the resolution of slow-neutron spectrometers. IV. The resolution function, spatial effects included, Acta Crystallographica Section A 31, 507 (1975).DOI
  7. [7]F. Zhu, L. Zhang, X. Wang, F. J. dos Santos, J. Song, T. Mueller, K. Schmalzl, W. F. Schmidt, A. Ivanov, J. T. Park, J. Xu, J. Ma, S. Lounis, S. Blügel, Y. Mokrousov, Y. Su, and T. Brückel, Topological magnon insulators in two-dimensional van der Waals ferromagnets CrSiTe3 and CrGeTe3: Toward intrinsic gap-tunability, Science Advances 7, eabi7532 (2021).
  8. [8]P. R. Bevington and D. K. Robinson, Data reduction and error analysis, McGraw Hill, New York (2003).
  9. [9]L. Chen, J.-H. Chung, T. Chen, C. Duan, A. Schnedewind, I. Radelytskyi, D. J. Voneshen, R. A. Ewings, M. B. Stone, A. I. Kolesnikov, B. Winn, S. Chi, R. A. Mole, D. H. Yu, B. Gao, and P. Dai, Magnetic anisotropy in ferromagnetic CrI3, Phys. Rev. B 101, 134418 (2020).DOI
  10. [10]E. J. Samuelsen, R. Silberglit, G. Shirane, and J. P. Remeika, Spin Waves in Ferromagnetic CrBr3 Studied by Inelastic Neutron Scattering, Phys. Rev. B 3, 157 (1971).
  11. [11]D.-H. Kim, K. Kim, K.-T. Ko, J. Seo, J. S. Kim, T.-H. Jang, Y. Kim, J.-Y. Kim, S.-W. Cheong, and J.-H. Park, Giant Magnetic Anisotropy Induced by Ligand LS Coupling in Layered Cr Compounds, Phys. Rev. Lett. 122, 207201 (2019).DOI
  12. [12]L. Chen, J.-H. Chung, M. B. Stone, A. I. Kolesnikov, B. Winn, V. O. Garlea, D. L. Abernathy, B. Gao, M. Augustin, E. J. G. Santos, and P. Dai, Magnetic Field Effect on Topological Spin Excitations in CrI₃, Phys. Rev. X 11, 031047 (2021).DOI
  13. [13]S. A. Owerre, A first theoretical realization of honeycomb topological magnon insulator, Journal of Physics: Condensed Matter 28, 386001 (2016).DOI

Paper details

vlnc:W_yqs4p5sh
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents