betaFeedback

WorksPhysics and Astronomy

Classification and enumeration of solid-solid phase transition mechanisms

Abstract

Crystal-structure match (CSM), the atom-to-atom correspondence between two crystalline phases, is used extensively to describe solid-solid phase transition (SSPT) mechanisms. However, existing computational methods cannot account for all possible CSMs. Here, we propose a formalism to classify all CSMs into a tree structure, which is independent of the choices of unit cell and supercell. We rigorously proved that only a finite number of noncongruent CSMs are of practical interest. By representing CSMs as integer matrices, we introduce the crystmatch method to exhaustively enumerate them, which uncontroversially solves the CSM optimization problem under any geometric criterion. For most SSPTs, crystmatch can reproduce all known deformation mechanisms and CSMs within 10 CPU minutes, while also revealing thousands of new candidates. The resulting database can be further used for comparing experimental phenomena, high-throughput energy barrier calculations, or machine learning.

Introduction

In solid-solid phase transition (SSPT), atoms in one crystal structure are rearranged to form another crystal structure. This process establishes an atom-to-atom correspondence between the initial and final structures, which is called a crystal-structure match (CSM) [1, 2, 3]. Every transition path on the potential energy surface (PES) determines a CSM, while the latter describes the SSPT more concisely and flexibly. Consequently, it is common for researchers to identify the CSM, rather than the transition path, to determine which SSPT mechanism is involved [4, 5, 6, 7, 8]. This is especially true in nucleation simulations [7, 8, 9, 10], where the term “mechanism” is almost synonymous with “CSM”, which serves as a common language for both nucleation and concerted mechanism studies [3].

It has long been believed that SSPTs, like chemical reactions, occur along a minimum energy path (MEP) with the lowest energy barrier [11, 12, 13]. Just as each transition path determines a CSM, each CSM can also yield an MEP through methods such as the solid-state nudged elastic band (NEB) [12]. However, NEB-like methods can only produce an MEP with the user-specified CSM, ignoring all other CSMs and their MEPs, as illustrated in Figure 1. Hence, despite their great success, NEB-like methods may still fail to give the lowest-barrier MEP, which has been an open question in the SSPT mechanism research for the past decade [13, 14, 15]. The main difficulty is that unlike the atom-to-atom correspondence in a chemical reaction, possible CSMs in an SSPT are extremely numerous—due to the large number of identical atoms and possible ways of lattice deformation—and thus hard to determine by human intuition [1, 2, 3].

Figure 1. A schematic diagram showing that the initial structure (orthorhombic, yellow) may evolve to the final structure (hexagonal, other colors) in a number of ways. (a) After specifying the final structure as shown in the blue box, the NEB method can find the MEP denoted by the blue dashed line. However, to become the final structure, neither the lattice nor the atoms must end up as the blue box. Other possible endpoints spread out in both lattice and atomic degrees of freedom (DOF) on the PES, whose MEPs (gray dashed lines) are inaccessible. (b) Endpoints that differ in rigid transformations (cyan) can be easily taken into account by the NEB method [20]. (c) Endpoints that differ in CSMs, including those with the same SLM (pink) and different SLMs (purple), which we use CRYSTMATCH to exhaust.

To investigate what CSMs are favored by the SSPT, efforts have been made on two fronts: variable-CSM MEP calculation [14, 15] and pure geometric CSM optimization [13]. The former includes the stochastic surface walking (SSW) [15, 16, 17] and PALLAS [14], where intensive energy calculations hinder the enumeration of CSMs. The latter relies on a specific optimization criterion, such as minimum strain [18], minimum number of broken bonds [1], or minimum total distance traveled by the atoms [2, 19]. However, geometrically optimized CSMs may not have the lowest energy barrier, and some are even suboptimal under their own criteria [3]. It would be useful to list all possible CSMs, both to guide MEP calculations and to identify the best CSM under any geometric criterion—yet, such a methodology is lacking.

In this paper, we present a complete classification of CSMs, and the CRYSTMATCH method for exhaustively enumerating them. To this end, a mathematical formalism is developed in Section II such that the deformation gradient, sublattice match (SLM), multiplicity and shuffle distance of a CSM can be rigorously defined in a cell-independent manner. These concepts organize all CSMs into a tree-like structure, as shown in Figure 2, whose matrix representation and pruning scheme are discussed in Section III. To traverse this tree, three algorithms are detailed in Section IV. We demonstrate their application using the B1–B2 and graphite-to-diamond transitions as examples in Section V.

Figure 2. Given the initial and final crystal structures, all CSMs between them can be classified into a tree by their multiplicities and SLMs. Without restrictions, the tree would have infinite breadth at each level. For empirical (see Table II) and computational considerations, an upper bound μmax⁡\mu_{\max} for the multiplicity μ\mu is introduced. Also, CSMs with too much strain or shuffle distance are deemed nonphysical. Under these prunings, the remaining tree contains only a finite number of CSMs, which can be obtained via Algorithms 1 and 2.

It should be noted that the molecular dynamics (MD) has also been used extensively to study SSPTs [21]. Among different transition paths, the one with the lowest energy barrier is most likely to be obtained by MD. This bypasses the CSM problem, but it takes an average time tˉ∝exp⁡(βΔ‡)\bar{t} \propto\exp(\beta\Delta^{\ddagger}) to see a rare event with energy barrier Δ‡\Delta^{\ddagger} to happen. Such Δ‡\Delta^{\ddagger} increases linearly with the supercell volume until it can accommodate a critical nucleus [8, 9, 10, 12], making the MD simulation very hard—if not infeasible. Fortunately, enhanced sampling techniques like the metadynamics (MetaD) [22, 23] can reinforce the occurrence of rare events by adding a history-dependent bias potential, making it possible to simulate nucleation in SSPTs [8, 9]. Nevertheless, the bias potential may elevate different energy barriers unequally, thus altering the lowest-barrier path and CSM. We do not discuss here how CRYSTMATCH can serve MetaD, but simply show that the enumeration results of the former contain the CSM yielded by the latter.

Cell-independent formalism

Conventionally, CSMs are described by a pair of initial and final supercells, as shown in Figure 3. However, the multivaluedness of this description causes severe in-

Figure 3. Four CSMs from A\mathcal{A} (orthorhombic) to B\mathcal{B} (hexagonal). Each CSM is described by the correspondences between the initial and final supercell vectors (pink), and two translational-inequivalent atoms (black). From the labels on the atoms (0–9 and A–F) in B\mathcal{B}, one can see that J1=J2≠J3≠J4\mathcal{J}_1 = \mathcal{J}_2 \ne\mathcal{J}_3 \ne\mathcal{J}_4.

conveniences for both the theory and the enumeration of CSMs [2, 3, 24]. The purpose of this section is to establish a cell-independent formalism, making it self-evident that multiplicity and SLM—the main subjects in Figure 2—are general, singlevalued, intrinsic properties of CSMs. We also define congruence relations among CSMs and SLMs, which are crucial for the efficiency of CRYSTMATCH.

To ensure the unambiguousness of the narration and proofs, we define fundamental terms (e.g., “lattice” and “crystal structure”) using the language of set theory. All lemmas are proved in Appendix A, while frequently used symbols are summarized in Table 1. Commutative diagrams, as a tool for depicting the composition of homomorphisms, are also adopted to simplify the exposition. Let us begin with a set of points in R3\mathbb{R}^{3}, where each point is endowed with an atomic species; we denote by X\mathbb{X} the set of all atomic species.

SymbolMeaning
AA, BBCrystal structure (atomic structure)
SSNonsingular linear transformation
+t+\mathbf{t}Translation by t∈R3\mathbf{t}\in\mathbb{R}^{3}
SA+tS\mathcal{A}+\mathbf{t}Structure deformed by SS, then translated by t\mathbf{t}
LAL_{\mathcal{A}}Lattice of a crystal structure A\mathcal{A}
L~A\widetilde{L}_{\mathcal{A}}Sublattice of a crystal structure A\mathcal{A}
ZAZ_{\mathcal{A}}Number of atoms in a primitive cell of A\mathcal{A}
J\mathcal{J}CSM (atom-to-atom correspondence)
(L~A,L~B,S)(\widetilde{L}_{\mathcal{A}},\widetilde{L}_{\mathcal{B}},S)An SLM from A\mathcal{A} to B\mathcal{B}
Z~\widetilde{Z}Period of an SLM or a CSM
μ\muMultiplicity of an SLM or a CSM
(S,t)(S,\mathbf{t})Affine transformation a↦Sa+t\mathbf{a}\mapsto S\mathbf{a}+\mathbf{t}

Table 1. TABLE I. Frequently used symbols in Section II.

Definition 1 (Atomic Structure). An atomic structure is a nonempty set A⊂R3\mathcal{A} \subset\mathbb{R}^{3} together with a mapping χA:A→X\chi_{\mathcal{A}}:\mathcal{A}\to\mathbb{X}.

Definition 2 (Atom-to-Atom Correspondence). Let A\mathcal{A} and B\mathcal{B} be atomic structures. We say that a mapping J:A→B\mathcal{J}:\mathcal{A}\to\mathcal{B} is an atom-to-atom correspondence if (1) J\mathcal{J} is bijective, and (2) J\mathcal{J} preserves atom species, i.e., makes the following diagram commute:

A→JBχA↓↓χBX=X(1)\begin{CD} \mathcal{A} @>\mathcal{J}>> \mathcal{B} \\ @V\chi_{\mathcal{A}}VV @VV\chi_{\mathcal{B}}V \\ \mathbb{X} @= \mathbb{X} \tag*{(1)} \end{CD}

The above diagram is essentially a directed graph, whose vertices are sets and arrows are mappings. Paths composed of multiple arrows naturally represent a composite mapping, from its starting point to its endpoint. Commutativity of Eq. (1) means that any two paths with the same starting point and endpoint are equal, i.e.,

χA=χB∘J.(2)\chi_{\mathcal{A}}=\chi_{\mathcal{B}}\circ\mathcal{J}. \tag*{(2)}

One can also interpret Eq. (1) as follows: For any a∈A\mathbf{a}\in\mathcal{A}, it is mapped along different paths to

χA(a)=χB(J(a)),(3)\chi_{\mathcal{A}}(\mathbf{a})=\chi_{\mathcal{B}}(\mathcal{J}(\mathbf{a})), \tag*{(3)}

which means that the species of atom a\mathbf{a} is the same as that of its counterpart J(a)\mathcal{J}(\mathbf{a}).

Commutative diagrams are primarily used in category theory and homological algebra, where the arrows represent homomorphisms. In this spirit, we redefine for all subsequent diagrams: Arrows between two atomic structures always represent atom-to-atom correspondences, i.e., species-preserving bijections. Consequently, the symbols χA\chi_{\mathcal{A}} and X\mathbb{X} no longer appear in most diagrams. This approach handles polyatomic SSPTs once and for all. We hope the reader keeps in mind that A⟶B\mathcal{A}\longrightarrow\mathcal{B} denotes an “isomorphism” between atomic structures.

Lattices and crystal structures

Definition 3 (Lattice). We say that a vector set L⊂R3L\subset\mathbb{R}^{3} is a lattice if it (1) is a group under vector addition, (2) is full rank (has three linearly independent elements), and (3) has a positive lower bound λ\lambda on the distance between any two of its elements, i.e.,

∀t1,t2∈L,t1≠t2 ⟹ ∣t1−t2∣≥λ.(4)\forall\mathbf{t}_{1},\mathbf{t}_{2}\in L,\quad\mathbf{t}_{1}\ne\mathbf{t}_{2}\ \Longrightarrow\ \lvert\mathbf{t}_{1}-\mathbf{t}_{2}\rvert\ge\lambda. \tag*{(4)}

Definition 4 (Crystal Structure). Let A\mathcal{A} be an atomic structure. We say that a vector t∈R3\mathbf{t}\in\mathbb{R}^{3} is a translation element of A\mathcal{A} if the mapping a↦a+t\mathbf{a}\mapsto\mathbf{a}+\mathbf{t} is an atom-to-atom correspondence from A\mathcal{A} to itself, i.e.,

A→+tA.(5)\mathcal{A}\xrightarrow{+\mathbf{t}}\mathcal{A}. \tag*{(5)}

We say that an atomic structure A\mathcal{A} is a crystal structure if all its translation elements form a lattice, denoted as LAL_{\mathcal{A}}. We refer to LAL_{\mathcal{A}} as the lattice of A\mathcal{A}, and sublattices of LAL_{\mathcal{A}} sublattices of A\mathcal{A}.

Let L~A\widetilde{L}_{\mathcal{A}} be a sublattice of a crystal structure A\mathcal{A}. The relation ∼\sim on A\mathcal{A} defined as

a∼a′⟺∃t∈L~A,a′=a+t(6)\mathbf{a}\sim\mathbf{a}'\quad\Longleftrightarrow\quad\exists\mathbf{t}\in\widetilde{L}_{\mathcal{A}},\quad\mathbf{a}'=\mathbf{a}+\mathbf{t} \tag*{(6)}

is an equivalence relation, whose reflexivity, symmetry, and transitivity are ensured by the identity element, invertibility, and closure of the group (L~A,+)(\widetilde{L}_{\mathcal{A}},+), respectively. We say that a,a′∈A\mathbf{a},\mathbf{a}'\in\mathcal{A} are L~A\widetilde{L}_{\mathcal{A}}-equivalent, and denote the L~A\widetilde{L}_{\mathcal{A}}-equivalence class of a\mathbf{a} by

a+L~A={a+t∣t∈L~A},(7)\mathbf{a}+\widetilde{L}_{\mathcal{A}}=\left\{\mathbf{a}+\mathbf{t}\mid\mathbf{t}\in\widetilde{L}_{\mathcal{A}}\right\}, \tag*{(7)}

and the quotient set by

A/L~A={a+L~A∣a∈A}.(8)\mathcal{A}/\widetilde{L}_{\mathcal{A}}=\left\{\mathbf{a}+\widetilde{L}_{\mathcal{A}}\mid\mathbf{a}\in\mathcal{A}\right\}. \tag*{(8)}

For any crystal structure A\mathcal{A}, we denote ZA=∣A/LA∣Z_{\mathcal{A}}=\lvert\mathcal{A}/L_{\mathcal{A}}\rvert, which equals to the number of atoms in a primitive cell. Actual crystal structures all have a finite ZAZ_{\mathcal{A}} since they have a finite atomic density. We will assume this henceforth, but the reader can also modify Definition 1 to make it rigorous; see Lemma 9.

Definition 5 (CSM). A crystal structure match (CSM) is an atom-to-atom correspondence between two crystal structures. We denote the set of all CSMs from crystal structure A\mathcal{A} to crystal structure B\mathcal{B} by CSM⁡(A,B)\operatorname{CSM}(\mathcal{A},\mathcal{B}).

Decomposing crystal-structure matches

Now we aim at defining the deformation gradient of a CSM. Our approach is to first define the shuffle, a type of CSM that is considered to have no deformation. Then, we will define the deformation of a general CSM as the difference between that CSM and a shuffle, as shown in Figure 4(a). In the following text, the composition of mappings (including CSMs, linear transformations, and translations) will appear more frequently. When there is no risk of confusion, we will denote f∘gf \circ g simply as fgfg.

Decomposition of a crystal-structure match and its shuffle lattices

Figure 4. (a) An example of J∈CSM⁡(A,B)\mathcal{J}\in\operatorname{CSM}(\mathcal{A},\mathcal{B}) being decomposed into a deformation gradient S∈CSM⁡(A,SA)S\in\operatorname{CSM}(\mathcal{A},S\mathcal{A}) and a shuffle JS−1∈CSM⁡(SA,B)\mathcal{J}S^{-1}\in\operatorname{CSM}(S\mathcal{A},\mathcal{B}). (b) In the above decomposition, a sublattice L~A⊂LA\widetilde{L}_{\mathcal{A}}\subset L_{\mathcal{A}} is deformed to the shuffle lattice L~B⊂LB\widetilde{L}_{\mathcal{B}}\subset L_{\mathcal{B}}. We call the triplet (L~A,L~B,S)(\widetilde{L}_{\mathcal{A}},\widetilde{L}_{\mathcal{B}},S) the SLM of J\mathcal{J}.

Definition 6 (Shuffle). Let A\mathcal{A} and B\mathcal{B} be crystal structures. We say that a vector t∈LA∩LBt \in L_{\mathcal{A}} \cap L_{\mathcal{B}} is a translation element of J∈CSM⁡(A,B)\mathcal{J} \in\operatorname{CSM}(\mathcal{A},\mathcal{B}) if we have the commutative diagram:

A→JB+t↓↓+tA→JB(9)\begin{CD} \mathcal{A} @>\mathcal{J}>> \mathcal{B} \\ @V{+t}VV @VV{+t}V \\ \mathcal{A} @>\mathcal{J}>> \mathcal{B} \tag*{(9)} \end{CD}

i.e., J(a+t)=J(a)+t\mathcal{J}(a+t)=\mathcal{J}(a)+t for all a∈Aa\in\mathcal{A}. If all translation elements of J\mathcal{J} form a lattice, we refer to it as the shuffle lattice of J\mathcal{J} and say that J\mathcal{J} is a shuffle. We use a squiggly arrow A⇝B\mathcal{A}\rightsquigarrow\mathcal{B} to denote a shuffle.

In actual SSPTs, A\mathcal{A} and B\mathcal{B} in different phases generally have no common translation elements (except 0\mathbf{0}), in which case J∈CSM⁡(A,B)\mathcal{J}\in\operatorname{CSM}(\mathcal{A},\mathcal{B}) can never be a shuffle. However, it is possible to deform A\mathcal{A} such that the deformed structure shares more translation elements with B\mathcal{B}, making the deformed CSM a shuffle. To formalize this idea, we denote by SA={Sa∣a∈A}S\mathcal{A}=\{Sa\mid a\in\mathcal{A}\} the crystal structure deformed from A\mathcal{A} via S∈GL⁡(3,R)S\in\operatorname{GL}(3,\mathbb{R}). It has a canonical atom-species mapping χAS−1\chi_{\mathcal{A}}^{S^{-1}}, which is the only mapping that makes the following diagram commutes:

References

  1. [1]V. Stevanović, R. Trottier, C. Musgrave, F. Therrien, A. Holder, and P. Graf, Predicting kinetics of polymorphic transformations from structure mapping and coordination analysis, Phys. Rev. Mater. 2, 033802 (2018).DOI
  2. [2]F. Therrien, P. Graf, and V. Stevanović, Matching crystal structures atom-to-atom, J. Chem. Phys. 152, 074106 (2020).
  3. [3]F.-C. Wang, Q.-J. Ye, Y.-C. Zhu, and X.-Z. Li, Crystal-structure matches in solid-solid phase transitions, Phys. Rev. Lett. 132, 086101 (2024).DOI
  4. [4]D. Zahn, Y. Grin, and S. Leoni, Mechanism of the pressure-induced wurtzite to rocksalt transition of cdse, Phys. Rev. B 72, 064110 (2005).DOI
  5. [5]F. Shimojo, S. Kodiyalam, I. Ebbsjö, R. K. Kalia, A. Nakano, and P. Vashishta, Atomistic mechanisms for wurtzite-to-rocksalt structural transformation in cadmium selenide under pressure, Phys. Rev. B 70, 184111 (2004).DOI
  6. [6]J. Cai and N. Chen, First-principles study of the wurtzite-to-rocksalt phase transition in zinc oxide, J. Phys.: Condens. Matter 19, 266207 (2007).DOI
  7. [7]D. Zahn and S. Leoni, Nucleation and growth in pressure-induced phase transitions from molecular dynamics simulations: Mechanism of the reconstructive transformation of NaCl to the CsCl-type structure, Phys. Rev. Lett. 92, 250201 (2004).pubmed.ncbi.nlm.nih.gov/15244985
  8. [8]M. Badin and R. Martoňák, Nucleating a different coordination in a crystal under pressure: A study of the B1-B2 transition in NaCl by metadynamics, Phys. Rev. Lett. 127, 105701 (2021).
  9. [9]P. A. Santos-Florez, H. Yanxon, B. Kang, Y. Yao, and Q. Zhu, Size-dependent nucleation in crystal phase transition from machine learning metadynamics, Phys. Rev. Lett. 129, 185701 (2022).
  10. [10]R. Z. Khaliullin, H. Eshet, T. D. Kühne, J. Behler, and M. Parrinello, Nucleation mechanism for the direct graphite-to-diamond phase transition, Nat. Mater. 10, 693 (2011).DOI
  11. [11]H. Eyring, The activated complex in chemical reactions, J. Chem. Phys. 3, 107 (1935).DOI
  12. [12]D. Sheppard, P. Xiao, W. Chemelewski, D. D. Johnson, and G. Henkelman, A generalized solid-state nudged elastic band method, J. Chem. Phys. 136, 074103 (2012).DOI
  13. [13]F. Therrien, E. B. Jones, and V. Stevanović, Metastable materials discovery in the age of large-scale computation, Appl. Phys. Rev. 8, 031310 (2021).DOI
  14. [14]L. Zhu, R. E. Cohen, and T. A. Strobel, Phase transition pathway sampling via swarm intelligence and graph theory, J. Phys. Chem. Lett. 10, 5019 (2019).DOI
  15. [15]C. Shang, X.-J. Zhang, and Z.-P. Liu, Stochastic surface walking method for crystal structure and phase transition pathway prediction, Phys. Chem. Chem. Phys. 16, 17845 (2014).DOI
  16. [16]S.-H. Guan, X.-J. Zhang, and Z.-P. Liu, Energy landscape of zirconia phase transitions, J. Am. Chem. Soc. 137, 8010 (2015).DOI
  17. [17]X.-J. Zhang and Z.-P. Liu, Variable-cell double-ended surface walking method for fast transition state location of solid phase transitions, J. Chem. Theory Comput. 11, 4885 (2015).DOI
  18. [18]X. Zhang, Y. Song, N. Tamura, and R. D. James, Determination of the stretch tensor for structural transformations, J. Mech. Phys. Solids 93, 34 (2016).
  19. [19]Q.-S. Huang, Y. Zhang, P. F. Liu, H. G. Yang, X. Zhang, and S.-H. Wei, Interface-confined intermediate phase in tio2 enables efficient photocatalysis, Proc. Natl. Acad. Sci. U.S.A. 121, e2318341121 (2024).
  20. [20]M. J. Field, A practical introduction to the simulation of molecular systems (Cambridge University Press, 1999) pp. 153–156.
  21. [21]S. Scandolo, M. Bernasconi, G. L. Chiarotti, P. Focher, and E. Tosatti, Pressure-induced transformation path of graphite to diamond, Phys. Rev. Lett. 74, 4015 (1995).pubmed.ncbi.nlm.nih.gov/10058391
  22. [22]A. Laio and M. Parrinello, Escaping free-energy minima, Proc. Natl. Acad. Sci. U.S.A. 99, 12562 (2002).DOI
  23. [23]R. Martoňák, A. Laio, and M. Parrinello, Predicting crystal structures: the Parrinello-Rahman method revisited, Phys. Rev. Lett. 90, 075503 (2003).
  24. [24]Y.-F. Li and Z.-P. Liu, Smallest stable Si/SiO₂ interface that suppresses quantum tunneling from machine-learning-based global search, Phys. Rev. Lett. 128, 226102 (2022).DOI
  25. [25]F. Therrien and V. Stevanović, Minimization of atomic displacements as a guiding principle of the martensitic phase transformation, Phys. Rev. Lett. 125, 125502 (2020).
  26. [27]H. T. Stokes, D. M. Hatch, J. Dong, and J. P. Lewis, Mechanisms for the reconstructive phase transition between the B₁ and B₂ structure types in NaCl and PbS, Phys. Rev. B 69, 174111 (2004).
  27. [28]E. C. Bain and N. Dunkirk, The nature of martensite, Trans. AIME 70, 25 (1924).
  28. [29]L. Sandoval, H. M. Urbassek, and P. Entel, The Bain versus Nishiyama–Wassermann path in the martensitic transformation of Fe, New J. Phys. 11, 103027 (2009).
  29. [30]W. Pitsch, The martensite transformation in thin foils of iron-nitrogen alloys, Philos. Mag. 4, 577 (1959).DOI
  30. [31]Z. Nishiyama, Martensitic transformation (Elsevier, 2012).
  31. [32]G. Kurdjumow and G. Sachs, Über den mechanismus der stahlhärtung, Z. Phys. 64, 325 (1930).
  32. [33]M. J. Buerger, Phase transformations in solids (John Wiley, 1951) pp. 183–211.
  33. [34]Y. Nga and C. Ong, Mechanism of pressure-induced polymorphic transition in NaCl, Phys. Rev. B 46, 10547 (1992).pubmed.ncbi.nlm.nih.gov/10002904
  34. [35]D. Zahn, Molecular dynamics investigation of the pressure induced B1 to B2 phase transitions of RbBr, J. Solid State Chem. 177, 3590 (2004).
  35. [36]M. Watanabe, M. Tokonami, and N. Morimoto, The transition mechanism between the CsCl-type and NaCl-type structures in CsCl, Acta Crystallogr. Sect. A 33, 294 (1977).DOI
  36. [37]O. Blaschko, G. Ernst, G. Quittner, G. Pépy, and M. Roth, Investigations of the NaCl-to-CsCl phase transition in RbI by elastic diffuse and inelastic neutron scattering, Phys. Rev. B 20, 1157 (1979).
  37. [38]P. Tolédano, K. Knorr, L. Ehm, and W. Depmeier, Phenomenological theory of the reconstructive phase transition between the NaCl and CsCl structure types, Phys. Rev. B 67, 144106 (2003).
  38. [39]S. H. Tolbert and A. Alivisatos, The wurtzite to rock salt structural transformation in cdse nanocrystals under high pressure, J. Chem. Phys. 102, 4642 (1995).
  39. [40]H. Sowa, On the transition from the wurtzite to the NaCl type, Acta Crystallogr. Sect. A 57, 176 (2001).pubmed.ncbi.nlm.nih.gov/11223504
  40. [41]M. Wilson and P. A. Madden, Transformations between tetrahedrally and octahedrally coordinated crystals: the wurzite→rocksalt and blende→rocksalt mechanisms, J. Phys.: Condens. Matter 14, 4629 (2002).DOI
  41. [42]M. S. Dresselhaus, G. Dresselhaus, and A. Jorio, Group theory: application to the physics of condensed matter (Springer Science & Business Media, 2007).
  42. [43]G. L. W. Hart and R. W. Forcade, Algorithm for generating derivative structures, Phys. Rev. B 77, 224115 (2008).DOI
  43. [44]S. Axler, Linear algebra done right (Springer, 2015) pp. 233–238.
  44. [45]R. Jonker and A. Volgenant, A shortest augmenting path algorithm for dense and sparse linear assignment problems, Computing 38, 325 (1987).
  45. [46]D. F. Crouse, On implementing 2d rectangular assignment algorithms, IEEE Trans. Aerosp. Electron. Syst. 52, 1679 (2016).DOI
  46. [47]D. J. Wales and J. P. Doye, Global optimization by basin-hopping and the lowest energy structures of Lennard-Jones clusters containing up to 110 atoms, J. Phys. Chem. A 101, 5111 (1997).
  47. [48]K. G. Murty, An algorithm for ranking all the assignments in order of increasing cost, Oper. Res. 16, 682 (1968).
  48. [49]See https://www.phy.pku.edu.cn/xzli/RESEARCH.htm, for the documentation and source code of CRYSTMATCH.
  49. [50]K. S. Atsushi Togo and I. Tanaka, Spglib: a software library for crystal symmetry search, Sci. Technol. Adv. Mater., Meth. 4, 2384822 (2024).DOI
  50. [51]F. P. Bundy, H. P. Bovenkerk, H. M. Strong, and R. H. Wentorf Jr, Diamond-graphite equilibrium line from growth and graphitization of diamond, J. Chem. Phys. 35, 383 (1961).
  51. [52]T. Irifune, A. Kurio, S. Sakamoto, T. Inoue, and H. Sumiya, Ultrahard polycrystalline diamond from graphite, Nature 421, 599 (2003).pubmed.ncbi.nlm.nih.gov/12571587
  52. [53]J. Wei, B. Feng, R. Ishikawa, T. Yokoi, K. Matsunaga, N. Shibata, and Y. Ikuhara, Direct imaging of atomistic grain boundary migration, Nat. Mater. 20, 951 (2021).DOI
  53. [54]J.-L. Li, Y.-F. Li, and Z.-P. Liu, Silicon orientations to grow semi-polar aln, Nat. Commun. 16, 1 (2025).DOI
  54. [55]H. Cohen, A course in computational algebraic number theory, Graduate texts in mathematics, Vol. 130 (Springer, 2011).

Paper details

vlnc:W_yrarnf7n
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents