betaFeedback

WorksPhysics and Astronomy

Uncertainty quantification in mechanics: A unified Bayesian perspective

Abstract

Uncertainty quantification (UQ) is essential to experimental mechanics, but has become particularly relevant in computational mechanics, manifesting in two fundamental problem types: forward and inverse problems. The former addresses how input uncertainties propagate to the quantities of interest, whereas the latter aims to infer unknown parameters from experimental observations or simulations. Since efficient propagation typically requires a prohibitive number of evaluations to compute marginal output distributions, the development of fast, data-driven surrogate models becomes necessary. Thus, we can distinguish between two inverse tasks: (i) the identification and calibration of input uncertainties, and (ii) the construction of surrogates, a methodology collectively referred to as surrogate-based UQ. Building on probabilistic reasoning and the concept of partial belief, we demonstrate that Bayesian probability theory provides a unified theoretical framework for addressing both problem types. We further show that Bayesian inference allows for the seamless incorporation of essential subproblems, including model selection for identifying the most probable model specifications and experimental design for optimizing data collection by identifying experiments or simulations that maximize expected information gain about parameters, among others such as connections to sensitivity analysis or the use of special priors like random fields. While this theoretical framework is presented for general mechanical problems, particular emphasis is placed on biomechanics, where variability and uncertainty is especially pronounced due to inherent biological heterogeneity, patient-specific variability, and noisy data.

*Corresponding author(s). E-mail(s): link;

Introduction

The integration of uncertainty quantification (UQ) has become indispensable to the fields of experimental and computational mechanics alike. As computational models increasingly inform engineering design and safety-critical decisions, deterministic output predictions are no longer sufficient. Instead, ensuring the reliability and robustness of simulation results requires a rigorous assessment of how input uncertainties, such as material properties, geometry, and boundary conditions, propagate through mechanical systems to affect the quantities of interest.

Biomechanical systems represent a prime example of where these uncertainties become most apparent. While physics-based mathematical models have substantially advanced our understanding of complex biomechanical systems, such as cardiovascular, respiratory, or cerebral physiology, their typically deterministic nature struggles to account for patient-specific variability, inherent biological heterogeneity, and noisy data. Collectively, these limitations remain a significant bottleneck for clinical translation.

In particular, two key challenges in the clinical application of biomechanical models persist [1]. First, quantifying uncertainty when adapting model inputs to patient-specific conditions is inherently difficult, as available data are often uncertain, incomplete, or noisy. Second, a persistent trade-off between model complexity and input uncertainty requires balancing errors introduced by model simplifications against those arising from uncertain parameters. Although many computational models aim to support clinical decision-making and accelerate medical device development, this potential remains only partially realized despite substantial progress over the past decade, largely due to the lack of a consistent framework.

Together, these challenges motivate a unified theoretical framework for UQ. Indeed, Bayesian probability theory has been mathematically proven as the unique, consistent approach for inference under uncertainty [2, 3]. By treating probability as a measure of partial belief, this theory provides a rigorous foundation to explicitly quantify all uncertainty sources, including noisy data, missing information, and uncertain models, while naturally incorporating prior knowledge. Building on these probabilistic principles, we demonstrate that Bayesian theory effectively addresses the two primary problem types: (i) forward problems and (ii) inverse problems, with many practical cases involving a combination of both, as shown in Figure 1.

Overview of surrogate-based uncertainty quantification

Figure 1. Overview of surrogate-based uncertainty quantification by propagating uncertainty from input to output and addressing the two inverse problems involved.

Forward problems in UQ refer to quantifying how uncertainties in the model inputs affect the uncertainty in a model output or quantity of interest. For instance, one may ask: What is the uncertainty in a particular Cauchy stress component at a certain point in the aorta wall due to uncertainties in the parameters of our constitutive model? Thus, we seek to propagate uncertainty from the model inputs to the output. Indeed, it will soon become apparent that uncertainty propagation often involves solving inverse problems for two distinct practical purposes: (i) quantification of the input uncertainty and (ii) surrogate modeling.

The term quantification of the input uncertainty, whether based on experimental data or on medical data in biomechanics, may require a parameter estimation problem for the constitutive model before uncertainty propagation can commence. It is therefore often referred to as model calibration and can also be reformulated as an optimization problem. Similar to before, one may ask: What are the most likely value and associated uncertainties for the stiffness parameter of a constitutive model, given a set of, say, uniaxial tension tests? The estimated parameters, which link the measured experimental quantities to the parameters of interest, can then serve as input for computational simulations to propagate these uncertainties through the model.

The term surrogate modeling requires further explanation. In order to propagate uncertainty, we need a sufficient number of samples to compute the marginal probability of the model output. We obtain this marginal probability by integrating the joint probability with respect to the model input parameters. In biomechanics, however, obtaining a single model output for one specific parameter set can demand hours, days, or even weeks of computational time. Unfortunately, reliable statistical estimates of model output uncertainty typically require thousands to millions of samples. This issue arises directly from the convergence behavior of numerical integration techniques used to evaluate the marginal probability (cf. Wollner et al. [4]).

Nevertheless, not all hope is lost. A common remedy is the use of a surrogate model, also known as an emulator or meta-model, which provides a fast, data-driven approximation of the original model.

Constructing such a surrogate follows a standard three-step procedure. This involves (i) generating a manageable dataset of model outputs by solving the original model for selected input parameter samples, (ii) fitting a parameterized function to these simulations to form the surrogate, and (iii) using this surrogate in place of the original model to efficiently approximate the marginal probability or output uncertainty. In essence, we have demonstrated that the forward UQ task frequently incorporates the inverse problem of identifying surrogate parameters. The surrogate should (i) approximate the original model as accurately and faithfully as possible so that the resulting uncertainty estimates remain meaningful and statistically significant, even with limited data, and (ii) be inexpensive and fast to evaluate, so that the computation becomes practically feasible.

In this review article, we show that Bayesian probability theory provides the unifying theoretical framework, that incorporates all these problems and concepts into a single coherent whole. For this purpose, we begin by introducing the concepts of logic of belief and partial truth in § 2. We then propose a workflow for UQ in § 3, ranging from inverse problems, namely model calibration and parameter estimation as well as surrogate modeling, to uncertainty propagation. Building on this foundation, we review popular surrogate models and selected alternatives and discuss model selection within the Bayesian framework in § 4. Next, we introduce Bayesian experimental design and provide a brief excursion into Bayesian optimization for inverse design in § 6. This is followed by a brief exposition of the connection to sensitivity analysis in § 7. It shows that sensitivity analysis can be understood as a special case and interpretation of the foregoing Bayesian theory, including a Bayesian generalization of Sobol’ indices. We conclude with the introduction of random fields for heterogeneous materials modeling as a special statistical prior within the Bayesian theory in § 8. While many topics are accompanied by illustrative mechanical examples, detailed computational aspects and sampling methods are only briefly touched upon, as they remain beyond the scope of this review article.

The logic of belief and partial truth

Here, we introduce probability theory as an extension of Aristotelian logic. Aristotle’s logic is formalized through logical statements called propositions (AA, BB, CC, …).

For example, let AA denote the proposition A≡A \equiv ‘Julius Caesar was left-handed.’ Its negation, ¬A\neg A, would then mean ¬A≡\neg A \equiv ‘Julius Caesar was not left-handed.’ Other propositions might include: B≡B \equiv ‘Julius Caesar was right-handed’ and C≡C \equiv ‘Julius Caesar was ambidextrous.’ New propositions can be formed by combining existing ones with logical operations. The logical AND operation (∧\land) yields statements such as A∧BA \land B, meaning A∧B≡A \land B \equiv ‘Julius Caesar was left-handed and right-handed.’ which is logically equivalent to A∧B≡A \land B \equiv ‘Julius Caesar was ambidextrous ≡C\equiv C.’ Likewise, the logical OR operation (∨\lor) allows combinations like A∨BA \lor B, meaning A∨B≡A \lor B \equiv ‘Caesar was left- or right-handed.’ In fact, the logical OR is already one concept more than strictly necessary, since De Morgan’s law allows it to be expressed in terms of negation and conjunction: ¬(A∨B)=¬A∧¬B\neg(A \lor B) = \neg A \land\neg B.

Propositions can take one of two logical values: true or false. For instance, consider the statement A≡A \equiv ‘Julius Caesar was left-handed.’ If this proposition is true, its negation must necessarily be false. Thus, A=True⇒¬A=FalseA = \mathrm{True} \Rightarrow\neg A = \mathrm{False} and vice versa A=False⇒¬A=TrueA = \mathrm{False} \Rightarrow\neg A = \mathrm{True}. Importantly, both AA and its negation ¬A\neg A cannot be true at the same time. That is, the compound statement A∧¬A≡A \land\neg A \equiv ‘Julius Caesar was left-handed and not left-handed’ is false regardless of which is option is actually true. In Boolean algebra, the logical value true is conventionally represented by the number 1, and false by the number 0. Hence, if A=1A = 1, then its negation satisfies ¬A=0\neg A = 0; equivalently, A=1⇒¬A=0A = 1 \Rightarrow\neg A = 0. The conjunction of two propositions, C≡A∧BC \equiv A \land B, is true only when both AA and BB are true. In other words, the statement ‘Caesar was left- and right-handed’ can only be true if both statements — ‘Caesar was left-handed’ and ‘Caesar was right-handed’ — are true. By contrast, the proposition, or disjunction (logical OR), ‘Caesar was left- or right-handed’ is true if either (or both) of the statements is true. Formally, A=1⇒A∨B=1A = 1 \Rightarrow A \lor B = 1, and, independently, B=1⇒A∨B=1B = 1 \Rightarrow A \lor B = 1.

The possible combinations of truth values for propositions and their logical operations can be conveniently summarized using truth tables, see Table 1.

AABBA∧BA \land BA∨BA \lor B
1001
0101
1111
0000

Table 1. Truth table according to Boolean (Aristotelian) logic.

Propositions can also be conditioned on other propositions, denoted by the vertical bar (∣|). For example, A∣B=1A \mid B = 1 is read as ‘AA is true given BB is true,’ ‘AA is true on the condition that BB is true,’ or simply ‘AA is true if BB is true.’ In our running example, this corresponds to the statement ‘Caesar was left-handed, assuming that he was right-handed.’ In essence, a condition specifies a prerequisite that is taken to be true before evaluating the truth of another proposition. Within the above truth table, conditioning on B=1B = 1 means restricting our attention to those rows where BB is fixed at 1. In other words, we consider only the second and third rows, where BB is true, and assess the truth value of AA under that condition.

We will shortly see how Bayesian probability theory extends Boolean logic, in which a proposition is either true (1) or false (0), to allow any real value in between. Such values can be interpreted as partial truths or as a degree of belief in the truthfulness of a given proposition. In fact, it was mathematically proven by Cox [2], and later presented in a more modern formulation in [3, 5], that under certain natural assumptions1, the probability calculus is, up to a constant exponent, the unique and only consistent extension of logic to partial truths. In this sense, the fundamental laws of probability arise directly from the requirements of logical consistency. They emerge naturally from Boolean algebra [6, 7, 8].

Let P(A)P(A) denote the probability, or degree of belief, that the proposition AA is true. Let a belief of 1 correspond to certainty, and a belief of 0 to impossibility. In principle, any other numerical representation could have been chosen for certainty or truth; the present choice is simply the most convenient. Logical consistency requires that either AA or its negation ¬A\neg A must be true, and conversely, that both cannot be true at the same time, i.e.,

P(A∨¬A)=1,P(A∧¬A)=0,(1)P(A \lor\neg A)=1,\qquad P(A \land\neg A)=0, \tag*{(1)}

where these relations capture the most fundamental constraints of Boolean logic.

Cox [2], building on Boole’s work, identified six basic properties of logic: (i) double negation: ¬(¬A)=A\neg(\neg A)=A; (ii) commutativity: A∨∧B=B∨∧AA\lor\land B=B\lor\land A; (iii) idempotence: stating a proposition twice is equivalent to stating it once, A∨∧A=AA\lor\land A=A; (iv) associativity: A∨∧(B∨∧C)=(A∨∧B)∨∧CA\lor\land(B\lor\land C)=(A\lor\land B)\lor\land C; (v) De Morgan’s law: ¬(A∧∨B)=¬A∨∧¬B\neg(A\land\lor B)=\neg A\lor\land\neg B; and (vi) absorption: A∧∨(A∨∧B)=AA\land\lor(A\lor\land B)=A, where ∧∨\land\lor and ∨∧\lor\land denotes two possible alternatives of each axiom using, consistently, either the first or second symbol each. In other words, each of the axioms: (ii) to (vi), has two equivalent variants. Cox argued that these basic requirements of logical consistency must also hold for partial truths. For example, the law of double negation, ¬(¬A)=A\neg(\neg A)=A, implies that the corresponding degree of belief satisfies P(¬(¬A))=P(A)P(\neg(\neg A))=P(A), or formally, ¬(¬A)=A⇒P(¬(¬A))=P(A)\neg(\neg A)=A\Rightarrow P(\neg(\neg A))=P(A). He further introduced the principle of transitivity: If we believe more strongly in AA than in BB, and more in BB than in CC, then we must also believe more strongly in AA than in CC; formally, (P(A)>P(B))∧(P(B)>P(C))⇒P(A)>P(C)(P(A)>P(B))\land(P(B)>P(C))\Rightarrow P(A)>P(C).

Based on these logical axioms, Cox derived the so-called sum rule and product rule without assuming any particular functional form. This derivation relies on two key assumptions: (i) different paths of logical reasoning given the same context K\mathcal{K} must lead to the same conclusions, and (ii) the probability of a statement being true is directly related to the probability of its negation. The resulting expressions are the sum rule,

P(A∧B∣K)=P(A∣K)+P(B∣K)−P(A∨B∣K),(2)P(A\land B\mid\mathcal{K})=P(A\mid\mathcal{K})+P(B\mid\mathcal{K})-P(A\lor B\mid\mathcal{K}), \tag*{(2)}

and the product rule,

P(A∧B∣K)=P(A∣B,K)P(B∣K).(3)P(A\land B\mid\mathcal{K})=P(A\mid B,\mathcal{K})P(B\mid\mathcal{K}). \tag*{(3)}

Here, P(A∣B,K)P(A\mid B,\mathcal{K}) denotes the belief that AA is true, given that statement BB is assumed to be true and given context K\mathcal{K}. For complete proofs, the interested reader is referred to related literature [2, 5, 9].

These two rules (Eqs. (2) and (3)) form the mathematical foundation of Bayesian probability theory and provide a consistent framework for reasoning under uncertainty. To apply them meaningfully, however, one must always specify the context or background information K\mathcal{K} on which the probabilities are conditioned. In any given problem, including those in the broad field of mechanics, there is always some background information available, at the very least in the form of the problem definition. This context is not a mere formality. It implies that (i) there is no such thing as an unconditional probability and (ii) omitting relevant background knowledge often leads to inconsistent reasoning. In our earlier discussion of Caesar’s dexterity, the background information implicitly included the assumptions that Caesar existed and that he was a human with two hands. To illustrate the importance of such context, let us now consider a different example. Suppose we analyze the preferred hand of the Hindu deity Vishnu, who is often depicted with four arms. Counting clockwise and starting at an arbitrary arm, let us define the proposition Ai≡A_i\equiv ‘Vishnu’s preferred arm was number ii,’ where i=1,2,3,4i=1,2,3,4. Then, by basic deductive logic, ¬A1=A2∨A3∨A4\neg A_1=A_2\lor A_3\lor A_4, or more generally ¬Ai=⋁j≠iAj\neg A_i=\bigvee_{j\ne i}A_j for j=1,2,3,4j=1,2,3,4. This leads to four equations P(Ai∣K)+P(¬Ai∣K)=1P(A_i\mid\mathcal{K})+P(\neg A_i\mid\mathcal{K})=1, and consequently, ∑iP(Ai∣K)=1\sum_iP(A_i\mid\mathcal{K})=1. We see that the context K\mathcal{K} of either Caesar or Vishnu substantially changes the analysis. In the probability-theoretic literature, this context K\mathcal{K} is often denoted in the form p(A∣K)p(A\mid\mathcal{K}) with an explicit conditional complex of propositions. For the remainder of this exposition, we will omit the explicit denotation of this context, the reader however be advised that probabilities are nevertheless and always conditional on context.

As introduced above, Bayesian probability theory is formulated in terms of propositions, to which it assigns a non-negative measure of truth called probability. Unlike in Boolean algebra, propositions are not limited to being either true or false, but may take any value in between. In this way, Bayesian probability theory extends inductive logic to situations involving uncertainty, where probabilities represent degrees of belief rather than absolute truth values. In contrast to frequentist statistics, this concept of probability is not an intrinsic property of a system or object that arises from the relative frequency of occurrence of a proposition in an experiment repeated ad infinitum. Instead, it expresses a subjective degree of belief in a proposition, conditioned on the available information. Different observers, having access to different information, may therefore reach different conclusions. However, consistency requires that observers who possess the same or equivalent information must arrive at the same conclusions. Together, this principle of consistency, along with the sum and product rules, forms the logical foundation of Bayesian inference and determines how beliefs should be updated as new information becomes available.

By combining the rules of logical consistency for partial truths, we arrive at the central relationships of Bayesian reasoning. Using the sum rule, we can immediately derive from Eq. (1) the intuitive result P(A∨¬A)=P(A)+P(¬A)=1P(A \lor\neg A) = P(A) + P(\neg A) = 1. Another basic intuition, and one of Cox’s axioms mentioned before, suggests that our belief in the statement A∧BA \land B should yield the exact same truth value as the logically equivalent reversed statement B∧AB \land A. Formally: A∧B=B∧A⇒P(A∧B)=P(B∧A)A \land B = B \land A \Rightarrow P(A \land B) = P(B \land A). From this point forward, we adopt notation that is more common in the contemporary literature and denote the logical AND (∧\land) with a comma (,), so that P(A,B)≡P(A∧B)P(A, B) \equiv P(A \land B). Applying the product rule Eq. (3), and, carelessly, omitting the context K\mathcal{K}, we immediately arrive at the well-known Bayes’ theorem,

P(A,B)=P(B,A)=P(A∣B)P(B)=P(B∣A)P(A).(4)\begin{aligned} P(A, B) &= P(B, A) \\ &= P(A \mid B)P(B) \\ &= P(B \mid A)P(A) . \tag*{(4)} \end{aligned}

Bayes’ theorem expresses how our belief in a proposition AA should be updated when new information BB becomes available. The term P(A)P(A) represents the prior probability, quantifying our degree of belief in AA before observing BB. The term P(B∣A)P(B \mid A) is the likelihood, describing how compatible the new information BB is with the assumption that AA is true. The updated belief, or posterior probability, is given by P(A∣B)P(A \mid B), which combines prior knowledge with new information through the normalization factor P(B)P(B), known as the evidence. In this way, Bayes’ theorem provides a consistent and logically grounded method for learning from data.

Evaluating the normalization term P(B)P(B) typically requires accounting for all mutually exclusive possibilities under which BB could occur. This is achieved through the marginalization rule, which ensures that probabilities remain consistent when integrating over unknown or unobserved variables. From the sum and product rules above, and using the law of negation (Eq. (1)), we obtain the marginalization rule in its simplest form,

P(B)=P(B,A∨¬A)=P(B,A)+P(B,¬A)=P(B∣A)P(A)+P(B∣¬A)P(¬A).(5)\begin{aligned} P(B) &= P(B, A \lor\neg A) = P(B, A) + P(B, \neg A) \\ &= P(B \mid A)P(A) + P(B \mid\neg A)P(\neg A) . \tag*{(5)} \end{aligned}

The marginalization rule generalizes naturally to a set of mutually exclusive and exhaustive propositions BiB_i, where Bi∧Bj=0B_i \land B_j = 0 for all i≠ji \ne j, with i,j=1,…,Ni,j = 1,\ldots,N, and ⋁i=1NBi=1\bigvee_{i=1}^{N} B_i = 1; that is, no two propositions BjB_j can be true simultaneously, and the disjunction of all propositions is surely true,

P(A)=∑i=1NP(A,Bi)=∑i=1NP(A∣Bi)P(Bi).(6)P(A) = \sum_{i=1}^{N} P(A, B_i) = \sum_{i=1}^{N} P(A \mid B_i)P(B_i) . \tag*{(6)}

Moreover, the marginalization rule can also be extended to continuous propositions a,b,ca,b,c, where the proposition aa expresses ‘aa has value in [amin⁡,amax⁡][a_{\min},a_{\max}],’ or a∈[amin⁡,amax⁡]a \in[a_{\min},a_{\max}]. For continuous variables, the probability of a specific value becomes infinitesimally small [10]. In this case, the notion of probability is generalized to probability density functions (PDF), denoted p(a)p(a). The continuous form of the marginalization rule is then

p(a)=∫p(a∣b)p(b) db.(7)p(a) = \int p(a \mid b)p(b)\,\mathrm{d}b . \tag*{(7)}

Together, the marginalization rule and Bayes’ theorem provide all necessary tools for reasoning and computation with probabilities2, or what we may call the calculus of uncertainties. Indeed, either the pair of the sum and product rules, or the pair of Bayes theorem (Eq. (4)) and the marginalization rule (Eq. (6)), are the only two rules we need to remember to do Bayesian inference.

Uncertainty quantification

Bayesian probability theory provides a robust framework for quantifying information and characterizing uncertainty across diverse contexts. It enables us to perform statistical inference, make controlled approximations, and switch seamlessly between forward and inverse problems. Furthermore, it allows for the analysis of how uncertainties interact within coupled physical models, even when informed by heterogeneous and noisy datasets. Remarkably, models for data analysis and UQ are built upon just two fundamental rules: (i) Bayes’ theorem and (ii) the marginalization rule. To implement this framework effectively, we follow a structured workflow for UQ, as illustrated in Figure 2. The following sections adhere strictly to the notation and logic established in this process.

References

  1. [1]Eck, V.G., Donders, W.P., sturdy, J., Feinberg, J., Delhaas, T., Hellevik, L.R., Huberts, W.: A guide to uncertainty quantification and sensitivity analysis for cardiovascular applications. International Journal for Numerical Methods in Biomedical Engineering 32(8), 02755 (2016) https://doi.org/10.1002/cnm.2755
  2. [2]Cox, R.T.: Probability, frequency and reasonable expectation. American Journal of Physics 14(1), 1–13 (1946) https://doi.org/10.1119/1.1990764
  3. [3]Sivia, D., Skilling, J.: Data Analysis: A Bayesian Tutorial, (2006). Oxford University Press
  4. [4]Wollner, M.P., Rolf-Pissarczyk, M., Holzapfel, G.A.: A reparameterization-invariant Bayesian framework for uncertainty estimation and calibration of simple materials. Computational Mechanics, 1–31 (2025) https://doi.org/10.1007/s00466-024-02573-2
  5. [5]Garrett, A.J.M.: Whence the laws of probability? In: Erickson, G.J., Rychert, J.T., Smith, C.R. (eds.) Maximum Entropy and Bayesian Methods. Fundamental Theories of Physics, pp. 71–86 (1998). https://doi.org/10.1007/978-94-011-5028-6_6 . Springer
  6. [6]Jaynes, E.T.: Probability Theory, (2003). https://doi.org/10.1017/CBO9780511790423 . Cambridge University Press
  7. [7]von Toussaint, U.: Bayesian inference in physics. Reviews of Modern Physics 83(3), 943–999 (2011) https://doi.org/10.1103/RevModPhys.83.943
  8. [8]von der Linden, W., Dose, V., von Toussaint, U.: Bayesian Probability Theory: Applications in the Physical Sciences, 1st edn. (2014). https://doi.org/10.1017/CBO9781139565608 . Cambridge University Press
  9. [9]Knuth, K.H., Skilling, J.: Foundations of inference. Axioms 1(1), 38–73 (2012) https://doi.org/10.3390/axioms1010038
  10. [10]Wollner, M.P., Rolf, M., Ranftl, S., Holzapfel, G.A.: Uncertainty quantification in biomechanics: probabilistic fundamentals. In: Holzapfel, G.A., Rolf, M., Xu, X.Y. (eds.) Model Validation and Uncertainty Quantification in Biomechanics: Sources and Methods of Uncertainty and Variability Analysis, (2026). Academic Press
  11. [11]Avril, S., Bonnet, M., Bretelle, A.-S., Grédiac, M., Hild, F., Jenny, P., Latourte, F., Lemosse, D., Pagano, S., Pagnacco, E., Pierron, F.: Overview of identification methods of mechanical parameters based on full-field measurements. Experimental Mechanics 48, 381–402 (2008) https://doi.org/10.1007/s11340-008-9148-y
  12. [12]Haylock, R.G.E.: Bayesian Inference About Outputs of Computationally Expensive Algorithms with Uncertainty on the Inputs. PhD thesis, University of Nottingham, UK (1997)
  13. [13]O’Hagan, A., Kennedy, M.C., Oakley, J.E.: Uncertainty analysis and other inference tools for complex computer codes. In: Bernardo, J.M., et al.(eds.) Bayesian Statistics 6: Proceedings of the Sixth Valencia International Meeting June 6-10, pp. 503–524 (1999). https://doi.org/10.1093/oso/9780198504856.003.0022 //doi.org/10.1016/j.media.2025.103703
  14. [14]Kennedy, M.C., O’Hagan, A.: Predicting the output from a complex computer code when fast approximations are available. Biometrika 87(1), 1–13 (2000) https://doi.org/10.1093/biomet/87.1.1
  15. [15]Oakley, J., O’Hagan, A.: Bayesian inference for the uncertainty distribution of computer model outputs. Biometrika 89(4), 769–784 (2002) https://doi.org/10.1093/biomet/89.4.769
  16. [16]O’Hagan, A.: Bayesian analysis of computer code outputs: a tutorial. Reliability Engineering & System Safety 91(10–11), 1290–1300 (2006) https://doi.org/10.1016/j.ress.2005.11.025
  17. [17]Ranftl, S., von der Linden, W.: Bayesian surrogate analysis and uncertainty propagation. In: Physical Sciences Forum, vol. 3, p. 6 (2021). https://doi.org/10.3390/psf2021003006 · Max-Ent 2021 Proceedings
  18. [18]Fokina, D., Muravleva, E., Ovchinnikov, G., Os-eledets, I.: Microstructure synthesis using style-based generative adversarial networks. Physical Review E 101(4), 043308 (2020) https://doi.org/10.1103/PhysRevE.101.043308
  19. [19]Hsu, T., Epting, W.K., Kim, H., Abernathy, H.W., Hackett, G.A., Rollett, A.D., Salvador, P.A., Holm, E.A.: Microstructure generation via generative adversarial network for heterogeneous, topologically complex 3D materials. JOM 73(1), 90–102 (2021) https://doi.org/10.1007/s11837-020-04484-y
  20. [20]Lambard, G., Yamazaki, K., Demura, M.: Generation of highly realistic microstructural images of alloys from limited data with a style-based generative adversarial network. Scientific Reports 13(1), 566 (2023) https://doi.org/10.1038/s41598-023-27574-8
  21. [21]Feldman, P., Fainstein, M., Siles, V., Delrieux, C., Iarussi, E.: Recursive variational autoencoders for 3D blood vessel generative modeling. Medical Image Analysis, 103703 (2025) https://doi.org/10.1016/j.media.2025.103703
  22. [22]Liang, L., Liu, M., Martin, C., Elefteriades, J.A., Sun, W.: A machine learning approach to investigate the relationship between shape features and numerically predicted risk of ascending aortic aneurysms. Biomechanics and Modeling in Mechanobiology 16(5), 1519–1533 (2017) https://doi.org/10.1007/s10237-017-0903-9
  23. [23]Verstraeten, S., Brüning, J., Goubergrits, L., Schievano, S., Capelli, C., Rizzo, A., Rolf, M., Holzapfel, G.A., Spanjaards, M., Huberts, W., SIMCor consortium: Generation and validation of virtual patient cohorts for in silico clinical trials: achievements from the SIMCor project. In: Holzapfel, G.A., Rolf, M., Xu, X.Y. (eds.) Model Validation and Uncertainty Quantification in Biomechanics: From Biological Soft Tissue to Blood Flow, (2026). Academic Press
  24. [24]Lyu, X., Ren, X.: Microstructure reconstruction of 2D/3D random materials via diffusion-based deep generative models. Scientific Reports 14(1), 5041 (2024) https://doi.org/10.1038/s41598-024-54861-9
  25. [25]Colmenarez, J.A., Dong, P., Li, X., Gu, L.: Biomechanics-trained diffusion model predicts post-PCI plaque morphology and rupture from IVOCT: towards an AI digital twin for stent planning. Computers in Biology and Medicine 198 Part B, 111216 (2025) https://doi.org/10.1016/j.compbiomed.2025.111216
  26. [26]Vahidullah, T., Kuhl, E.: Generative AI for material design: a mechanics perspective from burgers to matter. Computer Methods in Applied Mechanics and Engineering 461 Part A, 119171 (2026) https://doi.org/10.1016/j.cma.2026.119171
  27. [27]Yang, G., Huang, X., Hao, Z., Liu, M.-Y., Belongie, S., Hariharan, B.: Pointflow: 3D point cloud generation with continuous normalizing flows. In: Proceedings of the IEEE/CVF International Conference on Computer Vision, pp. 4541–4550 (2019). https://doi.org/10.1109/ICCV.2019.00464 Ranftl, S., Rolf-Pissarcyzk, M., Wolkerstorfer, G., Pepe, A., Egger, J., von der Linden, W., Holzapfel, G.A.: Stochastic modeling of inhomogeneities in the aortic wall and uncertainty quantification using a bayesian encoder–decoder surrogate. Computer Methods in Applied Mechanics and Engineering 401, 115594 (2022) https://doi.org/10.1016/j.cma.2022.115594
  28. [29]Holzapfel, G.A., Niestrawska, J.A., Ogden, R.W., Reinisch, A.J., Schriefl, A.J.: Modelling non-symmetric collagen fibre dispersion in arterial walls. Journal of The Royal Society Interface 12(106), 20150188 (2015) https://doi.org/10.1098/rsif.2015.0188
  29. [30]Jammalamadaka, S.R., Sengupta, A.: Topics in Circular Statistics vol. 5, (2001). https://doi.org/10.1142/4031 . World Scientific
  30. [31]Jaynes, E.T.: Information theory and statistical mechanics. The Physical Review 106(4), 620–630 (1957) https://doi.org/10.1103/PhysRev.106.620
  31. [32]Jeffreys, H.: Theory of Probability, (1939). Clarendon Press
  32. [33]Kroese, D.P., Taimre, T., Botev, Z.I.: Handbook of Monte Carlo Methods, (2011). https://doi.org/10.1002/9781118014967 . John Wiley & Sons, Inc
  33. [34]Pensalfini, M., Böll, M., Buganza Tepole, A.: Identification of model parameter distributions via multilevel Bayesian approaches. In: Holzapfel, G.A., Rolf, M., Xu, X.Y. (eds.) Model Validation and Uncertainty Quantification in Biomechanics: Sources and Methods of Uncertainty and Variability Analysis, (2026). Academic Press
  34. [35]Ranftl, S., Müller, T.S., Windberger, U., Brenn, G., von der Linden, W.: A Bayesian approach to blood rheological uncertainties in aortic hemodynamics. International Journal for Numerical Methods in Biomedical Engineering, 3576 (2022) https://doi.org/10.1002/cnm.3576
  35. [36]Madireddy, S., Sista, B., Vemaganti, K.: Bayesian calibration of hyperelastic constitutive models of soft tissue. Journal of the Mechanical Behavior of Biomedical Materials 59, 108–127 (2016) https://doi.org/10.1016/j.jmbbm.2015.10.025
  36. [37]Teferra, K., Brewick, P.T.: A Bayesian model calibration framework to evaluate brain tissue characterization experiments. Computer Methods in Applied Mechanics and Engineering 357, 112604 (2019) https://doi.org/10.1016/j.cma.2019.112604
  37. [38]Sundnes, J., Rodriguez-Cantano, R.: A Bayesian approach to parameter estimation in cardiac mechanics. In: Sommer, G., Li, K., Haspinger, D.C., Ogden, R.W. (eds.) Solid (Bio)mechanics: Challenges of the Next Decade. Studies in Mechanobiology, Tissue Engineering and Biomaterials vol. 24, (2022). https://doi.org/10.1007/978-3-030-92339-6_10 . Springer Cham
  38. [39]Joshi, A., Thakolkaran, P., Zheng, Y., Escande, M., Flaschel, M., De Lorenzis, L., Kumar, S.: Bayesian-EUCLID: discovering hyperelastic material laws with uncertainties. Computer Methods in Applied Mechanics and Engineering 398, 115225 (2022) https://doi.org/10.1016/j.cma.2022.115225
  39. [40]Krijnen, R.P., Joshi, A., Kumar, S., Peirlinck, M.: Unsupervised full-field Bayesian inference of orthotropic hyperelasticity from a single biaxial test: a myocardial case study. arXiv (2025) https://doi.org/10.48550/arXiv.2510.09498
  40. [41]Richter, J., Nitzler, J., Pegolotti, L., Menon, K., Biehler, J., Wall, W.A., Schiavazzi, D.E., Marsden, A.L., Pfaller, M.R.: Bayesian Windkessel calibration using optimized zero-dimensional surrogate models. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences 383(2292) (2025) https://doi.org/10.1098/rsta.2024.0223
  41. [42]Choi, C.H., Marsden, A.L., Schiavazzi, D.E.: FalconBC: Flow matching for Amortized inference of Latent-Conditioned physiologic Boundary Conditions. arXiv (2026) https://doi.org/10.48550/arXiv.2603.19331
  42. [43]Karumuri, S., Bilionis, I.: Learning to solve Bayesian inverse problems: an amortized variational inference approach using Gaussian and flow guides. Journal of Computational Physics 511, 113117 (2024) https://doi.org/10.1016/j.jcp.2024.113117
  43. [44]Thomas, A.J., Barocio, E., Bilionis, I., Pipes, R.B.: Bayesian inference of fiber orientation and polymer properties in short fiber-reinforced polymer composites. Composites Science and Technology 228, 109630 (2022) https://doi.org/10.1016/j.compscitech.2022.109630
  44. [45]Chakraborty, A., Messner, M.C.: Bayesian analysis for estimating statistical parameter distributions of elasto-viscoplastic material models. Probabilistic Engineering Mechanics 66, 103153 (2021) https://doi.org/10.1016/j.probengmech.2021.103153
  45. [46]Khodadadian, A., Noii, N., Parvizi, M., Abbaszadeh, M., Wick, T., Heitzinger, C.: A Bayesian estimation method for variational phase-field fracture problems. Computational Mechanics 66, 827–849 (2020) https://doi.org/10.1007/s00466-020-01876-4
  46. [47]Willmann, H., Nitzler, J., Brandstaeter, S., Wall, W.A.: Bayesian calibration of coupled computational mechanics models under uncertainty based on interface deformation. Advanced Modeling and Simulation in Engineering Sciences 9, 24 (2022) https://doi.org/10.1186/s40323-022-00237-5
  47. [48]Yang, L., Meng, X., Karniadakis, G.E.: Bayesian physics-informed neural networks for forward and inverse PDE problems with noisy data. Journal of Computational Physics 425, 109913 (2021) https://doi.org/10.1016/j.jcp.2020.109913
  48. [49]Linka, K., Schäfer, A., Meng, X., Zou, Z., Karniadakis, G.E., Kuhl, E.: Bayesian physics informed neural networks for real-world non-linear dynamical systems. Computer Methods in Applied Mechanics and Engineering 402, 115346 (2022) https://doi.org/10.1016/j.cma.2022.115346
  49. [50]Linka, K., Holzapfel, G.A., Kuhl, E.: Discovering uncertainty: Bayesian constitutive artificial neural networks. Computer Methods in Applied Mechanics and Engineering 433, 117517 (2025) https://doi.org/10.1016/j.cma.2024.117517
  50. [51]Xie, H., Song, J., Zhong, Y., Li, J., Gu, C., Choi, K.-S.: Extended Kalman filter nonlinear finite element method for nonlinear soft tissue deformation. Computer Methods and Programs in Biomedicine 200, 105828 (2021) https://doi.org/10.1016/j.cmpb.2020.105828
  51. [52]Song, J., Xie, H., Zhong, Y., Gu, C., Choi, K.-S.: Maximum likelihood-based extended Kalman filter for soft tissue modelling. Journal of the Mechanical Behavior of Biomedical Materials 137, 105553 (2023) https://doi.org/10.1016/j.jmbbm.2022.105553
  52. [53]Zhu, X., Li, J., Zhong, Y., Choi, K.-S., Shirinzadeh, B., Smith, J., Gu, C.: Iterative Kalman filter for biological tissue identification. International Journal of Robust and Nonlinear Control 35, 3949–3961 (2023) https://doi.org/10.1002/rnc.6742
  53. [54]Kennedy, M.C., O’Hagan, A.: Bayesian calibration of computer models. Journal of the Royal Statistical Society: Series B (Statistical Methodology) 63(3), 425–464 (2001) https://doi.org/10.1111/1467-9868.00294
  54. [55]Morrison, R.E., Oliver, T.A., Moser, R.D.: Representing model inadequacy: a stochastic operator approach. SIAM/ASA Journal on Uncertainty Quantification 6(2), 457–496 (2018) https://doi.org/10.1137/16M1106419
  55. [56]Paun, L.M., Colebank, M.J., Olufsen, M.S., Hill, N.A., Husmeier, D.: Assessing model mismatch and model selection in a Bayesian uncertainty quantification analysis of a fluid-dynamics model of pulmonary blood circulation. Journal of the Royal Society Interface 17(173), 20200886 (2020) https://doi.org/10.1098/rsif.2020.0886
  56. [57]Römer, U., Liu, J., Böl, M.: Surrogate-based Bayesian calibration of biomechanical models with isotropic material behavior. International Journal for Numerical Methods in Biomedical Engineering 38, 3575 (2022) https://doi.org/10.1002/cnm.3575
  57. [58]Calvetti, D., Dunlop, M., Somersalo, E., Stuart, A.: Iterative updating of model error for Bayesian inversion. Inverse Problems 34, 025008 (2018) https://doi.org/10.1088/1361-6420/aaa34d
  58. [59]Pensalfini, M., Buganza Tepole, A.: Mechanobiological and bio-mechanical pathways in cutaneous wound healing. PLoS Computational Biology 19(3), 1010902 (2023) https://doi.org/10.1371/journal.pcbi.1010902
  59. [60]Koutsourelakis, P.-S.: Accurate uncertainty quantification using inaccurate computational models. SIAM Journal on Scientific Computing 31(5), 3274–3300 (2009) https://doi.org/10.1137/080733565
  60. [61]Wiener, N.: The homogeneous chaos. American Journal of Mathematics 60(4), 897–936 (1938) https://doi.org/10.2307/2371268
  61. [62]Xiu, D., Karniadakis, G.E.: The Wiener–Askey polynomial chaos for stochastic differential equations. SIAM Journal on Scientific Computing 24(2), 619–644 (2002) https://doi.org/10.1137/S1064827501387826
  62. [63]Ghanem, R.G., Spanos, P.D.: Stochastic Finite Elements: A Spectral Approach, (1991). https://doi.org/10.1007/978-1-4612-3094-6 . Springer New York, NY
  63. [64]Ghanem, R., Higdon, D., Owhadi, H. (eds.): Handbook of Uncertainty Quantification vol. 6, (2017). https://doi.org/10.1007/978-3-319-12385-1 . Springer Cham
  64. [65]O’Hagan, A.: Polynomial chaos: a tutorial and critique from a statistician’s perspective (2013). http://tonyohagan.co.uk/academic/pdf/Polynomial-chaos.pdf,accessed25.06.2019
  65. [66]Oladyshkin, S., Nowak, W.: Data-driven uncertainty quantification using the arbitrary polynomial chaos expansion. Reliability Engineering & System Safety 106, 179–190 (2012) https://doi.org/10.1016/j.ress.2012.05.002
  66. [67]Jakeman, J.D., Franzelin, F., Narayan, A., Eldred, M., Pflüger, D.: Polynomial chaos expansions for dependent random variables. Computer Methods in Applied Mechanics and Engineering 351, 643–666 (2019) https://doi.org/10.1016/j.cma.2019.03.049
  67. [68]Torre, E., Marelli, S., Embrechts, P., Sudret, B.: A general framework for data-driven uncertainty quantification under complex input dependencies using vine copulas. Probabilistic Engineering Mechanics 55, 1–16 (2019) https://doi.org/10.1016/j.probengmech.2018.08.001
  68. [69]Xiu, D., Karniadakis, G.E.: The Wiener-Askey polynomial chaos for stochastic differential equations. SIAM Journal on Scientific Computing 27(3), 1118–1139 (2005)
  69. [70]Sudret, B.: Global sensitivity analysis using polynomial chaos expansions. Reliability Engineering & System Safety 93(7), 964–979 (2008) https://doi.org/10.1016/j.ress.2007.04.002
  70. [71]Crestaux, T., Le Maître, O.P., Martinez, J.-M.: Polynomial chaos expansion for sensitivity analysis. Reliability Engineering & System Safety 94(7), 1611–1172 (2009) https://doi.org/10.1016/j.ress.2008.10.008
  71. [72]Mühlpfordt, T., Findeisen, R., Hagenmeyer, V., Faulwasser, T.: Comments on truncation errors for polynomial chaos expansions. IEEE Control Systems Letters 2(1), 169–174 (2017) https://doi.org/10.1109/LCSYS.2017.2778138
  72. [73]Zhang, Z., Choi, M., Karniadakis, G.E.: Anchor points matter in ANOVA decomposition. In: Hesthaven, J., Rønquist, E. (eds.) Spectral and High Order Methods for Partial Differential Equations. Lecture Notes in Computational Science and Engineering vol. 76, pp. 347–355 (2011). https://doi.org/10.1007/978-3-642-15337-2_32 . Springer Berlin
  73. [74]Foo, J., Karniadakis, G.E.: Multi-element probabilistic collocation method in high dimensions. Journal of Computational Physics 229(5), 1536–1557 (2010) https://doi.org/10.1016/j.jcp.2009.10.043
  74. [75]Blatman, G., Sudret, B.: Adaptive sparse polynomial chaos expansion based on least angle regression. Journal of Computational Physics 230(6), 2345–2367 (2011)DOI
  75. [76]Doostan, A., Owhadi, H.: A non-adapted sparse approximation of PDEs with stochastic inputs. Journal of Computational Physics 230(8), 3015–3034 (2011) https://doi.org/10.1016/j.jcp.2011.01.002
  76. [77]Lüthen, N., Marelli, S., Sudret, B.: Sparse polynomial chaos expansions: literature survey and benchmark. SIAM/ASA Journal on Uncertainty Quantification 9(2), 593–649 (2021) https://doi.org/10.1137/20M1315774
  77. [78]Zhang, D., Lu, L., Guo, L., Karniadakis, G.E.: Quantifying total uncertainty in physics-informed neural networks for solving forward and inverse stochastic problems. Journal of Computational Physics 397, 108850 (2019) https://doi.org/10.1016/j.jcp.2019.07.048
  78. [79]Schwab, C., Zech, J.: Deep learning in high dimension: neural network expression rates for generalized polynomial chaos expansions in UQ. Analysis and Applications 17(1) (2019) https://doi.org/10.1142/S0219538518500203
  79. [80]Cooper, R.G.: Augmented Neural Network Surrogate Models for Polynomial Chaos Expansions and Reduced Order Modeling. PhD thesis, Virginia Polytechnic Institute and State University, CA, USA (2021)
  80. [81]Zheng, X., Zhang, J., Wang, N., Tang, G., Yao, W.: Mini-data-driven deep arbitrary polynomial chaos expansion for uncertainty quantification. Reliability Engineering & System Safety 229, 108813 (2021) https://doi.org/10.1016/j.ress.2022.108813
  81. [82]Lütjens, B., Crawford, C.H., Veilleitte, M., Newman, D.: PCE-PINNs: Physics-informed neural networks for uncertainty propagation in ocean modeling. arXiv (2021) https://doi.org/10.48550/arXiv.2105.02939
  82. [83]Zheng, X., Yao, W., Zhang, Y., Zhang, X.: Consistency regularization-based deep polynomial chaos neural network method for reliability analysis. Reliability Engineering & System Safety 227, 108732 (2022) https://doi.org/10.1016/j.ress.2022.108732
  83. [84]Oladyshkin, S., Praditia, T., Kroeker, I., Mohammadi, F., Nowak, W., Otte, S.: The deep arbitrary polynomial chaos neural network or how deep artificial neural networks could benefit from data-driven homogeneous chaos theory. Neural Networks 166, 85–104 (2023) https://doi.org/10.1016/j.neunet.2023.06.036
  84. [85]Yao, W., Zheng, X., Zhang, J., Wang, N., Tang, G.: Deep adaptive arbitrary polynomial chaos expansion: a mini-data-driven semi-supervised method for uncertainty quantification. Reliability Engineering & System Safety 229, 108813 (2023) https://doi.org/10.1016/j.ress.2022.108813
  85. [86]Bahmani, B., Kevrekidis, I.G., Shields, M.D.: Neural chaos: a spectral stochastic neural operator. Journal of Computational Physics 539, 114233 (2025) https://doi.org/10.1016/j.jcp.2025.114233
  86. [87]Exenberger, J., Ranftl, S., Peharz, R.: Deep polynomial chaos expansion. 29th International Conference on Artificial Intelligence and Statistics (AISTATS) (2026) https://doi.org/10.48550/arXiv.2507.21273
  87. [88]Campos, J.O., Guedes, R.M., Werneck, Y.B., Barra, L.P.S., dos Santos, R.W., Rocha, B.M.: Polynomial chaos expansion surrogate modeling of passive cardiac mechanics using the Holzapfel–Ogden constitutive model. Journal of Computational Science 71, 102039 (2023) https://doi.org/10.1016/j.jocs.2023.102039
  88. [89]Rodríguez-Cantano, R., Sundnes, J., Rognes, M.E.: Uncertainty in cardiac myofiber orientation and stiffnesses dominate the variability of left ventricle deformation response. International Journal for Numerical Methods in Biomedical Engineering 35(5), 3178 (2019) https://doi.org/10.1002/cnm.3178
  89. [90]Jafarinia, A., Melito, G.M., Müller, T.S., Rolf-Pissarczyk, M., Holzapfel, G.A., Brenn, G., Ellermann, K., Hochrainer, T.: Morphological parameters affecting false lumen thrombosis following type B aortic dissection: a systematic study based on simulations of idealized models. Biomechanics and Modeling in Mechanobiology 22(3), 885–904 (2023) https://doi.org/10.1007/s10237-023-01687-5
  90. [91]Krige, D.G.: A statistical approach to some basic mine valuation problems on the Witwatersrand. Journal of the Southern African Institute of Mining and Metallurgy 52(6), 119–139 (1951) https://doi.org/10.10520/AJA0038223X_4792
  91. [92]O’Hagan, A.: Curve fitting and optimal design for prediction. Journal of the Royal Statistical Society. Series B (Methodological) 40(1), 1–42 (1978) https://doi.org/10.2307/2984861
  92. [93]Rasmussen, C.E., Williams, C.K.I.: Gaussian Processes for Machine Learning, (2006). https://doi.org/10.1142/S0129065704001899 . The MIT Press
  93. [94]Abrahamsen, P.: Gaussian random fields and correlation functions. Norwegian Computing Center, Norway (1997)DOI
  94. [95]Cuturi, M.: Positive definite kernels in machine learning. arXiv (2009) https://doi.org/10.48550/arXiv.0911.5367
  95. [96]Duvenaud, D.K.: Automatic Model Construction with Gaussian Processes. PhD thesis, University of Cambridge, UK (2014)DOI
  96. [97]Schobi, R., Sudret, B., Wiart, J.: Polynomial-chaos-based Kriging. International Journal for Uncertainty Quantification 5(2) (2015) https://doi.org/10.1615/Int.J.UncertaintyQuantification.2015012467
  97. [98]Cortes, C., Vapnik, V.: Support-vector networks. Machine Learning 20(3), 273–297 (1995) https://doi.org/10.1007/BF00994018
  98. [99]Vovk, V.: Kernel ridge regression. In: Schölkopf, B., Luo, Z., Vovk, V. (eds.) Empirical Inference, (2013). https://doi.org/10.1007/978-3-642-41136-6_11 . Springer Berlin, Heidelberg
  99. [100]Girard, A.: Approximate Methods for Propagation of Uncertainty with Gaussian Process Models. PhD thesis, University of Glasgow, UK (2004)
  100. [101]Marrel, A., Iooss, B., Laurent, B., Roustant, O.: Calculations of Sobol indices for the Gaussian process metamodel. Reliability Engineering & System Safety 94(3), 742–751 (2009) https://doi.org/10.1016/j.ress.2008.07.008
  101. [102]Wirthl, B., Brandstaeter, S., Nitzler, J., Schre-fler, B.A., Wall, W.A.: Global sensitivity analysis based on Gaussian-process metamodelling for complex biomechanical problems. International Journal for Numerical Methods in Biomedical Engineering 39(3), 3675 (2023) https://doi.org/10.1002/cnm.3675
  102. [103]Hensman, J., Fusi, N., Lawrence, N.D.: Gaussian processes for big data. arXiv (2013) https://doi.org/10.48550/arXiv.1309.6835
  103. [104]Liu, H., Ong, Y.-S., Shen, X., Cai, J.: When Gaussian process meets big data: a review of scalable GPs. IEEE Transactions on Neural Networks and Learning Systems 31(11), 4405–4423 (2020) https://doi.org/10.1109/TNNLS.2019.2957109
  104. [105]Binois, M., Wycoff, N.: A survey on high-dimensional Gaussian process modeling with application to Bayesian optimization. ACM Transactions on Evolutionary Learning and Optimization 2(8), 1–26 (2022) https://doi.org/10.1145/354561
  105. [106]Brandstaeter, S., Fuchs, S.L., Biehler, J.: Global sensitivity analysis of a homogenized constrained mixture model of arterial growth and remodeling. Journal of Elasticity 145, 191–221 (2021) https://doi.org/10.1007/s10659-021-09833-9
  106. [107]Wirthl, B., Brandstaeter, S., Nitzler, J., Schre-fler, B.A., Wall, W.A.: Global sensitivity analysis based on Gaussian-process metamodelling for complex biomechanical problems. International Journal for Numerical Methods in Biomedical Engineering 39(3), 3675 (2023) https://doi.org/10.1002/cnm.3675
  107. [108]Lee, T., Turin, S.Y., Gosain, A.K., Bilionis, I., Buganza Tepole, A.: Propagation of material behavior uncertainty in a nonlinear finite element model of reconstructive surgery. Biomechanics and Modeling in Mechanobiology 17, 1857–1873 (2018) https://doi.org/10.1007/s10237-018-1061-4
  108. [109]Dinkel, M., Geitner, C.M., Robalo Rei, G., Nitzler, J., Wall, W.A.: Solving Bayesian inverse problems with expensive likelihoods using constrained Gaussian processes and active learning. Inverse Problems 40, 095008 (2024) https://doi.org/10.1088/1361-6420/ad5eb4
  109. [110]Dalton, D., Gao, H., Husmeier, D.: Finite-element Gaussian processes for the machine learning of steady-state linear partial differential equations. Computer Methods in Applied Mechanics and Engineering 451, 118580 (2026) https://doi.org/10.1016/j.cma.2025.118580
  110. [111]Paun, L.M., Colebank, M.J., Husmeier, D.: A comparison of Gaussian processes and polynomial chaos emulators in the context of haemodynamic pulse-wave propagation modelling. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences 383, 20240222 (2025) https://doi.org/10.1098/rsta.2024.0222
  111. [112]Ranftl, S., Melito, G.M., Badeli, V., Reinbacher-Köstinger, A., Ellermann, K., Linden, W.: Bayesian uncertainty quantification with multi-fidelity data and Gaussian processes for impedance cardiography of aortic dissection. Entropy 21(2), 58 (2019) https://doi.org/10.3390/e21010058
  112. [113]Huang, G.-B., Zhu, Q.-Y., Siew, C.-K.: Extreme learning machine: theory and applications. Neurocomputing 70(1-3), 489–501 (2006) https://doi.org/10.1016/j.neucom.2005.12.126
  113. [114]Rahimi, A., Recht, B.: Random features for large-scale kernel machines. In: Proceedings of the 21st International Conference on Neural Information Processing Systems, vol. 20 (2007)
  114. [115]Tripathy, R.K., Bilionis, I.: Deep UQ: Learning deep neural network surrogate models for high dimensional uncertainty quantification. Journal of Computational Physics 375, 565–588 (2018) https://doi.org/10.1016/j.jcp.2018.08.036
  115. [116]Zhu, Y., Zabaras, N.: Bayesian deep convolutional encoder–decoder networks for surrogate modeling and uncertainty quantification. Journal of Computational Physics 366, 415–447 (2018)
  116. [117]Lakshminarayanan, B., Pritzel, A., Blundell, C.: Simple and scalable predictive uncertainty estimation using deep ensembles. arXiv (2017) https://doi.org/10.48550/arXiv.1612.01474
  117. [118]Wilson, A.G., Izmailov, P.: Bayesian deep learning and a probabilistic perspective of generalization. Advances in neural information processing systems 33, 4697–4708 (2020)
  118. [119]Karniadakis, G.E., Kevrekidis, I.G., Lu, L., Perdikaris, P., Wang, S., Yang, L.: Physics-informed machine learning. Nature Reviews Physics 3(6), 422–440 (2021) https://doi.org/10.1038/s42254-021-00314-5
  119. [120]Zhu, Y., Zabaras, N., Koutsourelakis, P.-S., Perdikaris, P.: Physics-constrained deep learning for high-dimensional surrogate modeling and uncertainty quantification without labeled data. Journal of Computational Physics 394, 56–81 (2019) https://doi.org/10.1016/j.jcp.2019.05.024
  120. [121]Wang, S., Teng, Y., Perdikaris, P.: Understanding and mitigating gradient flow pathologies in physics-informed neural networks. SIAM Journal on Scientific Computing 43(5), 3055–3081 (2021) https://doi.org/10.1137/20M1318043
  121. [122]Wang, S., Sankaran, S., Perdikaris, P.: Respecting causality is all you need for training physics-informed neural networks. Computer Methods in Applied Mechanics and Engineering 421, 116813 (2022) https://doi.org/10.1016/j.cma.2024.116813
  122. [123]Basir, S., Senocak, I.: Physics and equality constrained artificial neural networks: application to forward and inverse problems with multi-fidelity data fusion. Journal of Computational Physics 463, 111301 (2022) https://doi.org/10.1016/j.jcp.2022.111301
  123. [124]Wang, S., Sankaran, S., Wang, H., Perdikaris, P.: An expert’s guide to training physics-informed neural networks. arXiv (2023) https://doi.org/10.48550/arXiv.2308.08468
  124. [125]Novák, L., Sharma, H., Shields, M.D.: Physics-informed polynomial chaos expansions. Journal of Computational Physics 506, 112926 (2024) https://doi.org/10.1016/j.jcp.2024.112926
  125. [126]Raissi, M., Perdikaris, P., Karniadakis, G.E.: Machine learning of linear differential equations using Gaussian processes. Journal of Computational Physics 348, 683–693 (2017) https://doi.org/10.1016/j.jcp.2017.07.050
  126. [127]Raissi, M., Karniadakis, G.E.: Hidden physics models: machine learning of nonlinear partial differential equations. Journal of Computational Physics 357, 125–141 (2018) https://doi.org/10.1016/j.jcp.2017.11.039
  127. [128]Cross, E.J., Rogers, T.J., Pitchforth, D.J., Gibson, S.J., Zhang, S., Jones, M.R.: A spectrum of physics-informed Gaussian processes for regression in engineering. Data-Centric Engineering 5, 8 (2024) https://doi.org/10.1017/dce.2024.2
  128. [129]Lu, L., Jin, P., Pang, G., Zhang, Z., Karniadakis, G.E.: Learning nonlinear operators via DeepONet based on the universal approximation theorem of operators. Nature Machine Intelligence 3(3), 218–229 (2021) https://doi.org/10.1038/s42256-021-00302-5
  129. [130]Wang, S., Wang, H., Perdikaris, P.: Learning the solution operator of parametric partial differential equations with physics-informed deeponets. Science Advances 7(40), 8605 (2021) https://doi.org/10.1126/sciadv.abi8605
  130. [131]Yu, X., Hooten, S., Liu, Z., Zhao, Y., Fiorentino, M., Van Vaerenbergh, T., Zhang, Z.: Separable operator networks. arXiv (2024) https://doi.org/10.48550/arXiv.2407.11253
  131. [132]Mandl, L., Goswami, S., Lambers, L., Ricken, T.: Separable physics-informed DeepONet: breaking the curse of dimensionality in physics-informed machine learning. Computer Methods in Applied Mechanics and Engineering 434, 117586 (2025) https://doi.org/10.1016/j.cma.2024.117586
  132. [133]Yin, M., Ban, E., Rego, B.V., Zhang, E., Cavinato, C., Humphrey, J.D., Karniadakis, G.E.: Simulating progressive intramural damage leading to aortic dissection using DeepONet: an operator–regression neural network. Journal of The Royal Society Interface 19(1987), 20210670 (2022) https://doi.org/10.1098/rsif.2021.0670
  133. [134]Goswami, S., Li, D.S., Rego, B.V., Latorre, M., Humphrey, J.D., Karniadakis, G.E.: Neural operator learning of heterogeneous mechanobiological insults contributing to aortic aneurysms. Journal of The Royal Society Interface 19, 20220410 (2022) https://doi.org/10.1098/rsif.2022.0410
  134. [135]Agarwal, A., Sarkar, D.R., Goswami, S.: Multimodal neural operators for real-time biomechanical modelling of traumatic brain injury. arXiv (2025) https://doi.org/10.48550/arXiv.2510.03248
  135. [136]Hong, J., Min, C., Lee, B., Persad, A.R., Jeong, J.-H., Park, Y.-H.: Estimating aortic pressure waveform in a 1D hemodynamic model of the human arterial system using DeepONet. 46th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 1–5 (2024) https://doi.org/10.1109/EMBC53108.2024.10781510
  136. [137]Zhu, Y., Peng, B.: Neural Operator-based Framework for Time Efficient Denoising of Displacement Fields in Ultrasound Elastography, pp. 3318–3323 (2024). https://doi.org/10.1109/SMC54092.2024.10831893
  137. [138]Goswami, S., Yin, M., Yu, Y., Karniadakis, G.E.: A physics-informed variational DeepONet for predicting crack path in quasi-brittle materials. Computer Methods in Applied Mechanics and Engineering 391, 114587 (2022) https://doi.org/10.1016/j.cma.2022.114587
  138. [139]Jafarzadeh, S., Silling, S., Zhang, L., Ross, C., Lee, C.H., Rahman, S.M.R., Wang, S., Yu, Y.: Heterogeneous peridynamic neural operators: discover biotissue constitutive law and microstructure from digital image correlation measurements. Foundations of Data Science 7, 226–270 (2025) https://doi.org/10.3934/fods.2024041
  139. [140]You, H., Zhang, Q., Ross, C.J., Lee, C.-H., Hsu, M.-C., Yu, Y.: A physics-guided neural operator learning approach to model biological tissues from digital image correlation measurements. arXiv (2022) https://doi.org/10.48550/arXiv.2204.00205
  140. [141]Ahmadi, N., Cao, Q., Humphrey, J.D., Karniadakis, G.E.: Physics-informed machine learning in biomedical science and engineering. Annual Review of Biomedical Engineering 28, 309–336 (2026) https://doi.org/10.1146/annurev-bioeng-110824-124907
  141. [142]Mandl, L., Ricken, T., Goswami, S.: Physics-informed neural operators for biomechanics: advancing computational modeling with separable architectures. In: Holzapfel, G.A., Rolf, M., Xu, Y.X. (eds.) Model Validation and Uncertainty Quantification in Biomechanics: From Soft Biological Tissue to Blood Flow, (2026). Academic Press
  142. [143]Breiman, L., Friedman, J., Olshen, R.A., Stone, C.J.: Classification and Regression Trees, (2017). https://doi.org/10.1201/9781315139470 . Chapman and Hall/CRC
  143. [144]Breiman, L.: Random forests, Machine Learning 45, 5–32 (2001) https://doi.org/10.1023/A:1010933404324
  144. [145]Friedman, J.H.: Stochastic gradient boosting. Computational Statistics and Data Analysis 38(4), 367–378 (2002) https://doi.org/10.1016/S0167-9473(01)00065-2
  145. [146]Efron, B.: Bootstrap methods: another look at the jackknife. In: Kotz, S., Johnson, N.L. (eds.) Breakthroughs in Statistics: Methodology and Distribution, pp. 569–593 (1992). https://doi.org/10.1007/978-1-4612-4380-9_41 . Springer New York
  146. [147]Chen, T., Guestrin, C.: XGBoost: A scalable tree boosting system. In: Proceedings of the 22nd ACM SIGKDD International Conference on Knowledge Discovery and Data Mining, pp. 785–794. Association for Computing Machinery, New York, NY (2016). https://doi.org/10.1145/2939672.2939785
  147. [148]Prokhorenkova, L., Gusev, G., Vorobev, A., Dorogush, A.V., Gulin, A.: Catboost: Unbiased boosting with categorical features. arXiv (2019) https://doi.org/10.48550/arXiv.1706.09516
  148. [149]Braito, S., Krispel, T., Badeli, V., Tronstad, C., Hisdal, J., Kalvøy, H., Kern, R., Ranftl, S.: Uncertainty quantification for impedance plethysmography with gradient boosting tree regression. In: Model Validation and Uncertainty Quantification in Biomechanics: Sources and Methods of Uncertainty and Variability Analysis, (2026). Academic Press
  149. [150]Kerschen, G., Golinval, J.-C., Vakakis, A.F., Bergman, L.A.: The method of proper orthogonal decomposition for dynamical characterization and order reduction of mechanical systems: an overview. Nonlinear dynamics 41(1), 147–169 (2005) https://doi.org/10.1007/s11071-005-2803-2
  150. [151]Lassila, T., Manzoni, A., Quarteroni, A., Rozza, G.: Model order reduction in fluid dynamics: challenges and perspectives. In: Quarteroni, A., Rozza, G. (eds.) Reduced Order Methods for Modeling and Computational Reduction, pp. 235–273 (2014). https://doi.org/10.1007/978-3-319-02090-7_9 . Springer Cham
  151. [152]Rathore, S., Africa, P.C., Ballarin, F., Pichi, F., Girfoglio, M., Rozza, G.: Projection-based reduced order modelling for unsteady parametrized optimal control problems in 3D cardiovascular flows. Computer Methods and Programs in Biomedicine 269, 108813 (2025) https://doi.org/10.1016/j.cmpb.2025.108813
  152. [153]Kutz, J.N., Brunton, S.L., Brunton, B.W., Proctor, J.L.: Dynamic Mode Decomposition: Data-Driven Modeling of Complex Systems, (2016). https://doi.org/10.1137/1.9781611974508 . SIAM
  153. [154]Chinesta, F., Cueto, E., Payan, Y., Ohayon, J. (eds.): Reduced Order Models for the Biomechanics of Living Organs, (2023). https://doi.org/10.1016/C2020-0-03057-4 . Academic Press
  154. [155]Siena, P., Girfoglio, M., Rozza, G.: Fast and accurate numerical simulations for the study of coronary artery bypass grafts by artificial neural networks. In: Chinesta, F., Cueto, E., Payan, Y., Ohayon, J. (eds.) Reduced Order Models for the Biomechanics of Living Organs, pp. 167–183 (2023). https://doi.org/10.1016/B978-0-32-389967-3.00012-3 . Academic Press
  155. [156]Balzotti, C., Siena, P., Girfoglio, M., Stabile, G., Dueñas-Pamplona, J., Sierra-Pallares, J., Amat-Santos, I., Rozza, G.: A reduced order model formulation for left atrium flow: an atrial fibrillation case. Biomechanics and Modeling in Mechanobiology 23(4), 1411–1429 (2024) https://doi.org/10.1007/s10237-024-01847-1
  156. [157]Chen, P., Quarteroni, A., Rozza, G.: Reduced Order Methods for Uncertainty Quantification Problems
  157. [158]Bäumler, K., Rolf-Pissarczyk, M., Schussnig, R., Fries, T.-P., Mistelbauer, G., Marsden, A.L., Fleischmann, D., Holzapfel, G.A.: Assessment of aortic dissection remodeling with patient-specific fluid–structure interaction models. IEEE Transactions on Biomedical Engineering 72(3), 953–964 (2025) https://doi.org/10.1109/TBME.2024.3480362
  158. [159]Fleeter, C.M., Geraci, G., Schiavazzi, D.E., Kahn, A.M., Marsden, A.M.: Multilevel and multifidelity uncertainty quantification for cardiovascular hemodynamics. Computer Methods in Applied Mechanics and Engineering 365, 113030 (2020) https://doi.org/10.1016/j.cma.2020.113030
  159. [160]Schäfer, F., Choi, C., Zanoni, A., Menon, K., Gianluca, G., Marsden, A.L., Schiavazzi, D.E.: An introduction to multi-fidelity uncertainty propagation for applications in biomechanics. In: Holzapfel, G.A., Rolf, M., Xu, X.Y. (eds.) Model Validation and Uncertainty Quantification in Biomechanics: Sources and Methods of Uncertainty and Variability Analysis, (2026). Academic Press
  160. [161]Biehler, J., Gee, M.W., Wall, W.A.: Towards efficient uncertainty quantification in complex and large-scale biomechanical problems based on a Bayesian multi-fidelity scheme. Biomechanics and Modeling in Mechanobiology 14(3), 489–513 (2015) https://doi.org/10.1007/s10237-014-0618-0
  161. [162]Tran, J.S., Schiavazzi, D.E., Ramachandra, A.B., Kahn, A.M., Marsden, A.L.: Automated tuning for parameter identification and uncertainty quantification in multi-scale coronary simulations. Computers and Fluids 142, 128–138 (2017) https://doi.org/10.1016/j.compfluid.2016.05.015
  162. [163]Fleeter, C.M., Geraci, G., Schiavazzi, D.E., Kahn, A.M., Marsden, A.L.: Multilevel and multifidelity uncertainty quantification for cardiovascular hemodynamics. Computer Methods in Applied Mechanics and Engineering 365, 113030 (2020) https://doi.org/10.1016/j.cma.2020.113030
  163. [164]Lee, T., Bilionis, I., Buganza Tepole, A.: Propagation of uncertainty in the mechanical and biological response of growing tissues using multi-fidelity Gaussian process regression. Computer Methods in Applied Mechanics and Engineering 359, 112724 (2020) https://doi.org/10.1016/j.cma.2019.112724
  164. [165]Choi, C.H., Zanoni, A., Schiavazzi, D.E., Marsden, A.L.: On the performance of multi-fidelity and reduced-dimensional neural emulators for inference of physiologic boundary conditions. arXiv (2025) https://doi.org/10.48550/arXiv.2506.11683
  165. [166]Molléro, R., Pennec, X., Delingette, H., Garny, A., Ayache, N., Sermesant, M.: Multifidelity-CMA: a multifidelity approach for efficient personalisation of 3D cardiac electromechanical models. Biomechanics and Modeling in Mechanobiology 17(1), 285–300 (2018) https://doi.org/10.1007/s10237-017-0960-0
  166. [167]Nitzler, J., Biehler, J., Fehn, N., Koutsourelakis, P.-S., Wall, W.A.: A generalized probabilistic learning approach for multi-fidelity uncertainty quantification in complex physical simulations. Computer Methods in Applied Mechanics and Engineering 400, 115600 (2022) https://doi.org/10.1016/j.cma.2022.115600 https://doi.org/10.1016/j.cma.2022.115600
  167. [168]Nitzler, J., Temir, B.Z., Koutsourelakis, P.-S., Wall, W.A.: Efficient Bayesian multi-fidelity inverse analysis for expensive and non-differentiable physics-based simulations in high stochastic dimensions. Computer Methods in Applied Mechanics and Engineering 448, 118442 (2026) https://doi.org/10.1016/j.cma.2025.118442
  168. [169]Nitzler, J., Bergbauer, M., Koutsourelakis, P.-S., Wall, W.A.: Scalable high-dimensional Bayesian field reconstruction with finite elements: application to 3D porous media flow. arXiv (2026) https://doi.org/10.48550/arXiv.2605.24682
  169. [170]Kass, R.E., Raftery, A.E.: Bayes factors. Journal of the American Statistical Association 90(430), 773–795 (1995)
  170. [171]O’Hagan, A.: Fractional Bayes factors for model comparison. Journal of the Royal Statistical Society: Series B (Methodological) 57(1), 99–118 (1995) https://doi.org/10.1111/j.2517-6161.1995.tb02017.x
  171. [172]Madireddy, S., Sista, B., Vemaganti, K.: A Bayesian approach to selecting hyperelastic constitutive models of soft tissue. Computer Methods in Applied Mechanics and Engineering 291, 102–122 (2015) https://doi.org/10.1016/j.cma.2015.03.012
  172. [173]Aggarwal, A., Hudson, L.T., Laurence, D.W., Lee, C.-H., Pant, S.: A Bayesian constitutive model selection framework for biaxial mechanical testing of planar soft tissues: application to porcine aortic valves. Journal of the Mechanical Behavior of Biomedical Materials 138, 105657 (2023) https://doi.org/10.1016/j.jmbbm.2023.105657
  173. [174]Ritto, T.G., Nunes, L.C.S.: Bayesian model selection of hyperelastic models for simple and pure shear at large deformations. Computers & Structures 165, 101–109 (2015) https://doi.org/DOI
  174. [175]Mototake, Y.I., Izuno, H., Nagata, K., Demura, M., Okada, M.: A universal Bayesian inference framework for complicated creep constitutive equations. Scientific Reports 10(1), 10437 (2020) https://doi.org/10.1038/s41598-020-65945-7
  175. [176]Battalgazy, B., Khatamz, D., Ghasemi, Z., Mallick, D.D., Arroyave, R., Srivastava, A.: A Bayesian-based approach for constitutive model selection and calibration using diverse material responses. Acta Materialia 287, 120796 (2025) https://doi.org/10.1016/j.actamat.2025.120796
  176. [177]Urrea–Quintero, J.-H., Anton, D., De Lorenzis, L., Wessels, H.: Automated constitutive model discovery by pairing sparse regression algorithms with model selection criteria. Computer Methods in Applied Mechanics and Engineering 449 Part B, 118551 (2026) https://doi.org/10.1016/j.cma.2025.118551
  177. [178]Chiachío, J., Chiachío, M., Saxena, A., Sankararaman, S., Rus, G., Goebel, K.: Bayesian model selection and parameter estimation for fatigue damage progression models in composites. International Journal of Fatigue 70, 361–373 (2015) https://doi.org/10.1016/j.ijfatigue.2014.08.003
  178. [179]Hamdia, K.M., Msekh, M.A., Silani, M., Thai, T.Q., Budarapu, P.R., Rabczuk, T.: Assessment of computational fracture models using Bayesian method. Engineering Fracture Mechanics 205, 387–398 (2019) https://doi.org/10.1016/j.engfracmech.2018.09.019
  179. [180]Oden, J.T., Prudencio, E.E., Hawkins-Daarud, A.: Selection and assessment of phenomenological models of tumor growth. Mathematical Models and Methods in Applied Sciences 23(7), 1309–1338 (2913) https://doi.org/10.1142/S0218202513500103
  180. [181]Rinkens, A., Verhoosel, C.V., Alicke, A., Anderson, P.D., Jaensson, N.O.: Bayesian model selection for complex flows of yield stress fluids. arXiv (2026) https://doi.org/10.48550/arXiv.2601.10115 Akaike, H.: A new look at the statistical model identification. IEEE Transactions on Automatic Control 19(6), 716–723 (2003) https://doi.org/10.1109/TAC.1974.1100705
  181. [183]Stoica, P., Selen, Y.: Model-order selection: a review of information criterion rules. IEEE Signal Processing Magazine 21(4), 36–47 (2004) https://doi.org/10.1109/MSP.2004.1311138
  182. [184]Javid, K., Handley, W., Hobson, M., Lasenby, A.: Compromise-free Bayesian neural networks. arXiv (2020) https://doi.org/10.48550/arXiv.2004.12211
  183. [185]Stone, M.: Cross-validatory choice and assessment of statistical predictions. Journal of the Royal Statistical Society: Series B (Methodological) 36(2), 111–133 (1974) https://doi.org/10.1111/j.2517-6161.1974.tb00994.x
  184. [186]Stone, M.: An asymptotic equivalence of choice of model by cross-validation and Akaike’s criterion. Journal of the Royal Statistical Society: Series B (Methodological) 39(1), 44–47 (1977) https://doi.org/10.1111/j.2517-6161.1977.tb01603.x
  185. [187]Trevor, H., Robert, T., Jerome, F.: The Elements of Statistical Learning: Data Mining, Inference, and Prediction, (2009). Springer. Chapter 9
  186. [188]Chaloner, K., Verdinelli, I.: Bayesian experimental design: a review. Statistical Science 10, 273–304 (1995) https://doi.org/10.1214/ss/1177009939
  187. [189]DasGupta, A.: 29. Review of optimal Bayes designs. In: Ghosh, S., Rao, C.R. (eds.) Design and Analysis of Experiments vol. 13, pp. 1099–1147 (1996). https://doi.org/10.1016/S0169-7161(96)13031-5
  188. [190]Lindley, D.V.: Bayesian statistics: a review. In: Bayesian Statistics, pp. 1–74 (1972). https://doi.org/10.1137/1.9781611970654.ch1
  189. [191]MacKay, D.J.C.: Information-based objective functions for active data selection. Neural Computation 4(4), 590–604 (1992) https://doi.org/10.1162/neco.1992.4.4.590
  190. [192]Loredo, T.J.: Bayesian adaptive exploration. AIP Conference Proceedings 707(1), 330–346 (2004) https://doi.org/10.1063/1.1751377
  191. [193]Helin, T., Marzouk, Y., Rojo-Garcia, J.R.: Bayesian optimal experimental design with Wasserstein information criteria. arXiv (2025) https://doi.org/10.48550/arXiv.2504.10092
  192. [194]Huan, X., Marzouk, Y.M.: Simulation-based optimal Bayesian experimental design for nonlinear systems. Journal of Computational Physics 232, 288–317 (2013) https://doi.org/10.1016/j.jcp.2012.08.013
  193. [195]Long, Q., Scavino, M., Tempone, R., Wang, S.: Fast estimation of expected information gains for Bayesian experimental designs based on Laplace approximations. Computer Methods in Applied Mechanics and Engineering 259, 24–39 (2013) https://doi.org/10.1016/j.cma.2013.02.017
  194. [196]Beck, J., Dia, B.M., Espath, L.F.R., Long, Q., Tempone, R.: Fast Bayesian experimental design: Laplace-based importance sampling for the expected information gain. Computer Methods in Applied Mechanics and Engineering 334, 523–553 (2018) https://doi.org/10.1016/j.cma.2018.01.053
  195. [197]Pandita, P., Bilionis, I., Panchal, J.: Bayesian optimal design of experiments for inferring the statistical expectation of expensive black-box functions. Journal of Mechanical Design 141(10), 101404 (2019) https://doi.org/10.1115/1.4043930
  196. [198]Pandita, P., Tsifilis, P., Awalgaonkar, N.M., Bilionis, I., Panchal, J.: Surrogate-based sequential Bayesian experimental design using non-stationary Gaussian processes. Computer Methods in Applied Mechanics and Engineering 385, 114007 (2021) https://doi.org/10.1016/j.cma.2021.114007
  197. [199]Eberle-Blick, S., Hyvönen, N.: Bayesian experimental design for linear elasticity. Inverse Problems and Imaging 18, 1294–1319 (2024) https://doi.org/10.3934/ipi.2024015
  198. [200]Ricciardi, D.E., Seidl, D.T., Lester, B.T., Jones, A.R., Jones, E.M.C.: Bayesian optimal experimental design for constitutive model calibration. International Journal of Mechanical Sciences 265, 108881 (2024) https://doi.org/10.1016/j.ijmecsci.2023.108881 Science, vol. 27, pp. 400–404 (1974). https://doi.org/10.1007/3-540-07165-2_55 . Springer Berlin
  199. [201]Bhattacharya, K., Cao, L., Stuart, A.: Optimal experimental design for reliable learning of history-dependent constitutive laws. Computer Methods in Applied Mechanics and Engineering 457, 119022 (2026) https://doi.org/10.1016/j.cma.2026.119022
  200. [202]Ryan, E.G., Drovandi, C.C., McGree, J.M., Pettitt, A.N.: A review of modern computational algorithms for Bayesian optimal design. International Statistical Review 84, 128–154 (2015) https://doi.org/10.1111/insr.12107
  201. [203]Brochu, E., Cora, V.M., de Freitas, N.: A tutorial on Bayesian optimization of expensive cost functions, with application to active user modeling and hierarchical reinforcement learning. arXiv (2010) https://doi.org/10.48550/arXiv.1012.2599
  202. [204]Shahriari, B., Swersky, K., Wang, Z., Adams, R.P., de Freitas, N.: Taking the human out of the loop: a review of Bayesian optimization. Proceedings of the IEEE 104(1), 1–24 (2015) https://doi.org/10.1017/CBO9781107415324.004
  203. [205]Frazier, P.I.: A tutorial on Bayesian optimization. arXiv (2018) https://doi.org/10.48550/arXiv.1807.02811
  204. [206]Kawaguchi, K., Kaelbling, L.P., Lozano-Pérez, T.: Bayesian optimization with exponential convergence. Advances in Neural Information Processing Systems 28 (2015)arxiv.org/abs/1604.01348
  205. [207]Jones, D.R., Schonlau, M., Welch, W.J.: Efficient global optimization of expensive black-box functions. Journal of Global Optimization 13(4), 455–492 (1998) https://doi.org/10.1023/A:1008306431147
  206. [208]Močkus, J.: On Bayesian methods for seeking the extremum. In: Močkus, J. (ed.) Optimization Techniques IFIP Technical Conference Novosibirsk, July 1–7, 1974. Optimization Techniques 1974. Lecture Notes in Computer Science, vol. 27, pp. 400–404 (1974). https://doi.org/10.1007/3-540-07165-2_55 . Springer Berlin
  207. [209]Hernández-Lobato, J.M., Hoffman, M.W., Ghahramani, Z.: Predictive entropy search for efficient global optimization of black-box functions. arXiv (2014) https://doi.org/10.48550/arXiv.1406.2541
  208. [210]Wang, Z., Jegelka, S.: Max-value entropy search for efficient Bayesian optimization. arXiv (2017) https://doi.org/10.48550/arXiv.1703.01968
  209. [211]Preuss, R., Toussaint, U.: Global variance as a utility function in Bayesian optimization. Physical Sciences Forum 3(1), 3 (2021) https://doi.org/10.3390/psf2021003003
  210. [212]Hoffer, J.G., Ranftl, S., Geiger, B.C.: Robust Bayesian target value optimization. Computers & Industrial Engineering 180, 109279 (2023)DOI
  211. [213]Balandat, M., Karrer, B., Jiang, D., Daulton, S., Letham, B., Wilson, A.G., Bakshy, E.: BoTorch: a framework for efficient Monte-Carlo Bayesian optimization. arXiv (2020) https://doi.org/10.48550/arXiv.1910.06403
  212. [214]Tian, Y., Li, T., Pang, J., Zhou, Y., Xue, D., Ding, X., Lookman, T.: Materials design with target-oriented Bayesian optimization. npj Computational Materials 11, 209 (2025) https://doi.org/10.1038/s41524-025-01704-4
  213. [215]Kansara, H., Khosroshahi, S.F., Guo, L., Bessa, M.A., Tan, W.: Multi-objective Bayesian optimisation of spinodoid cellular structures for crush energy absorption. Computer Methods in Applied Mechanics and Engineering 440, 117890 (2025) https://doi.org/10.1016/j.cma.2025.117890
  214. [216]Raßloff, A., Seibert, P., Kalina, K.A., Kästner, M.: Inverse design of spinodoid structures using Bayesian optimization. Computational Mechanics 77, 275–296 (2025) https://doi.org/10.1007/s00466-024-02587-w
  215. [217]Chiappetta, M., Carraturо, M., Raßloff, A., Kästner, M., Auricchio, F.: An efficient Bayesian framework for inverse problems via optimization and inversion: surrogate modeling, parameter inference, and uncertainty quantification. arXiv (2026) https://doi.org/10.48550/arXiv.2602.04537
  216. [218]Vangelatos, Z., Sheikh, H.M., Marcus, P.S., Grigoropoulos, C.P., Lopez, V.Z., Flamourakis, G., Farsari, M.: Strength through defects: a novel Bayesian approach for the optimization of architected materials. Science Advances 7, 2218 (2021) https://doi.org/10.1126/sciadv.abk2218
  217. [219]Borowska, A., Gao, H., Lazarus, A., Husmeier, D.: Bayesian optimisation for efficient parameter inference in a cardiac mechanics model of the left ventricle. International Journal for Numerical Methods in Biomedical Engineering 35(5), 3593 (2022) https://doi.org/10.1002/cnm.3593
  218. [220]Miranda-Valdez, I.Y., Mäkinen, T., Koivisto, J., Alava, M.J.: Bayesian optimization to infer parameters in viscoelasticity. Journal of Rheology 69(6), 1059–1066 (2025) https://doi.org/10.1122/8.0001068
  219. [221]Snoek, J., Larochelle, H., Adams, R.P.: Practical Bayesian optimization of machine learning algorithms. arXiv (2012) https://doi.org/10.48550/arXiv.1206.2944
  220. [222]Zhong, Y., Li, Y., Xu, C., Xie, G., Hou, J., Shi, X.: A Bayesian neural network and extended finite element method based prediction method of crack tip parameters and growth path. Theoretical and Applied Fracture Mechanics 145, 105659 (2026) https://doi.org/10.1016/j.tafmec.2026.105659
  221. [223]Zhang, D., Dai, W., Ding, Y.: Bayesian optimization–based physics-informed neural network for adaptive prediction of multiaxial fatigue life in metallic materials. Fatigue & Fracture of Engineering Materials & Structures 49(1), 28–51 (2026) https://doi.org/10.1111/ffe.70101
  222. [224]Huber, F., Bürkner, P.C., Gödd eke, D., Schulte, M.: Knowledge-based modeling of simulation behavior for Bayesian optimization. Computational Mechanics 74, 151–168 (2024) https://doi.org/10.1007/s00466-023-02427-3
  223. [225]Saltelli, A., Ratto, M., Andres, T., Campolongo, F., Cariboni, J., Gatelli, D., Saisana, M. Tarantola, S.: Global Sensitivity Analysis: The Primer. (2008). https://doi.org/10.1002/9780470725184 . John Wiley & Sons
  224. [226]Melito, G.M., Brandstaeter, S., Quicken, S., Rolf, M., Holzapfel, G.A., Ellermann, K., Huberts, W.: Sensitivity analysis in biomechanics: addressing model complexity and uncertainty. In: Holzapfel, G.A., Rolf, M., Xu, X.Y. (eds.) Model Validation and Uncertainty Quantification in Biomechanics: Sources and Methods of Uncertainty and Variability Analysis, (2026). Academic Press
  225. [227]Sobol’, I.M.H.: On sensitivity estimation for nonlinear mathematical models. Matematicheskoe modelirovanie 2(1), 112–118 (1990)
  226. [228]Oakley, J.E., O’Hagan, A.: Probabilistic sensitivity analysis of complex models: a Bayesian approach. Journal of the Royal Statistical Society B: Statistical Methodology 66(3), 751–769 (2004) https://doi.org/10.1111/j.1467-9868.2004.05304.x
  227. [229]Becker, W., Rowson, J., Oakley, J.E., Yoxall, A., Manson, G., Worden, K.: Bayesian sensitivity analysis of a model of the aortic valve. Journal of Biomechanics 44(8), 1499–1506 (2011) https://doi.org/10.1016/j.jbiomech.2011.03.008
  228. [230]Melis, A., Clayton, R.H., Marzo, A.: Bayesian sensitivity analysis of a 1D vascular model with Gaussian process emulators. International Journal for Numerical Methods in Biomedical Engineering 33(12), 2882 (2017) https://doi.org/10.1002/cnm.2882
  229. [231]Vanmarcke, E.: Random Fields: Analysis and Synthesis, (2010). World Scientific
  230. [232]Bošnjak, D., Schussnig, R., Ranftl, S., Holzapfel, G.A., Fries, T.P.: Geometric uncertainty of patient-specific blood vessels and its impact on aortic hemodynamics: A computational study. Computers in Biology and Medicine 190, 110017 (2025) https://doi.org/10.1016/j.compbiomed.2025.110017
  231. [233]Hauseux, P., Hale, J.S., Cotin, S., Bordas, S.P.A.: Quantifying the uncertainty in a hyper-elastic soft tissue model with stochastic parameters. Applied Mathematical Modelling 62, 86–02 (2018) https://doi.org/10.1016/j.apm.2018.04.021
  232. [234]Tran, J.S., Schiavazzi, D.E., Kahn, A.M., Marsden, A.L.: Uncertainty quantification of simulated biomechanical stimuli in coronary artery bypass grafts. Computer Methods in Applied Mechanics and Engineering 345, 402–428 (2019) https://doi.org/10.1016/j.cma.2018.10.024
  233. [235]He, X., Zhou, S., Xu, Y., Tian, J.: Random phase field model for simulating mixed fracture modes in spatially variable rocks under impact loading. International Journal of Impact Engineering 196, 105174 (2025) https://doi.org/10.1016/j.ijimpeng.2024.105174
  234. [236]Su, Y., Zhu, J., Long, X., Zhao, L., Chen, C., Liu, C.: Statistical effects of pore features on mechanical properties and fracture behaviors of heterogeneous random porous materials by phase-field modeling. International Journal of Solids and Structures 264, 112098 (2023) https://doi.org/10.1016/j.ijsolstr.2022.112098
  235. [237]Hai, L., Li, J.: Modeling tensile damage and fracture of quasi-brittle materials using stochastic phase-field model. Theoretical and Applied Fracture Mechanics 118, 103283 (2022) https://doi.org/10.1016/j.tafmec.2022.103283
  236. [238]Stefanou, G., Savvas, D., Gavallas, P., Papaioannou, I.: The effect of random field parameter uncertainty on the response variability of composite structures. Composites Part C: Open Access 9, 100324 (2022) https://doi.org/10.1016/j.jcomc.2022.100324
  237. [239]Sakata, S., Stefanou, G., Shirahama, K., Ono, S.: Probabilistic strength estimation analysis of composites considering cross-correlated random fields of local strength and apparent elastic properties. Mechanics Research Communications 152, 104628 (2026) https://doi.org/10.1016/j.mechrescom.2026.104628
  238. [240]Staber, B., Guilleminot, J.: A random field model for anisotropic strain energy functions and its application for uncertainty quantification in vascular mechanics. Computer Methods in Applied Mechanics and Engineering 333, 94–113 (2018) https://doi.org/10.1016/j.cma.2018.01.001
  239. [241]Shinozuka, M., Deodatis, G.: Simulation of stochastic processes by spectral representation. Appl Mech Rev 44, 191–204 (1991) https://doi.org/10.1115/1.3119501
  240. [242]Shinozuka, M., Deodatis, G.: Simulation of multi-dimensional Gaussian stochastic fields by spectral representation. Appl Mech Rev 49, 29–53 (1996) https://doi.org/10.1115/1.3101883
  241. [243]Xiu, D.: Numerical Methods for Stochastic Computations: A Spectral Method Approach, (2010). Princeton University Press
  242. [244]Le Maître, O., Knio, O.M.: Spectral Methods for Uncertainty Quantification: With Applications to Computational Fluid Dynamics, (2010). https://doi.org/10.1007/978-90-481-3520-2 . Springer Dordrecht
  243. [245]Liu, Y., Li, J., Sun, S., Yu, B.: Advances in Gaussian random field generation: a review. Computers and Geosciences 23(5), 1011–1047 (2019) https://doi.org/10.1007/s10596-019-09867-y
  244. [246]Grigoriu, M.: Applied Non-Gaussian Processes: Examples, Theory, Simulation, Linear Random Vibration, and MATLAB Solutions, (1995). Prentice Hall
  245. [247]Grigoriu, M.: Simulation of stationary non-Gaussian translation processes. Journal of Engineering Mechanics 124(2), 121–126 (1998) https://doi.org/10.1061/(ASCE)0733-9399(1998)124:2(121)
  246. [248]Kim, H., Shields, M.D.: Simulation of strongly non-Gaussian non-stationary stochastic processes utilizing Karhunen-Loeve expansion. In: 12th International Conference on Applications of Statistics and Probability in Civil Engineering, ICASP12 (2015) 2015.06.004
  247. [249]Vio, R., Andreani, P., Wamsteker, W.: Numerical simulation of non-Gaussian random fields with prescribed correlation structure. Publications of the Astronomical Society of the Pacific 113(786), 1009–1020 (2001) https://doi.org/10.1086/322919
  248. [250]Trandafir, R., Demetriu, S.: Numerical simulation of non-Gaussian random fields. In: 7th Balkan Conference on Operational Research. Constanta, Romania, pp. 231–237 (2005)
  249. [251]Bocchini, P., Deodatis, G.: Critical review and latest developments of a class of simulation algorithms for strongly non-Gaussian random fields. Probabilistic Engineering Mechanics 23(4), 393–407 (2008) https://doi.org/10.1016/j.probengmech.2007.09.001
  250. [252]Shields, M.D., Deodatis, G., Bocchini, P.: A simple and efficient methodology to approximate a general non-Gaussian stationary stochastic process by a translation process. Probabilistic Engineering Mechanics 26(4), 511–519 (2011) https://doi.org/10.1016/j.probengmech.2011.04.003
  251. [253]Hasofer, A.M., Ditlevsen, O.D., Tarp-Johansen, N.J.: Positive random fields for modeling material stiffness and compliance. In: 7th International Conference on Structural Safety and Reliability, ICOSSAR ’97, pp. 723–730 (1998)
  252. [254]Vio, R., Andreani, P., Tenorio, L., Wamsteker, W.: Numerical simulation of non-Gaussian random fields with prescribed marginal distributions and cross-correlation structure. II. Multivariate random fields. Publications of the Astronomical Society of the Pacific 114, 1281–1289 (2002) https://doi.org/10.1086/342767
  253. [255]Benowitz, B.A., Shields, M.D., Deodatis, G.: Determining evolutionary spectra from non-stationary autocorrelation functions. Probabilistic Engineering Mechanics 41, 73–88 (2015) https://doi.org/10.1016/j.probengmech.2015.06.004
  254. [256]Kramer, P.R., Kurbanmuradov, O., Sabelfeld, K.: Comparative analysis of multiscale Gaussian random field simulation algorithms. Journal of Computational Physics 226(1), 897–924 (2007) https://doi.org/10.1016/j.jcp.2007.05.002
  255. [257]Fuglstad, G.A., Lindgren, F., Simpson, D., Rue, H.: Exploring a new class of non-stationary spatial Gaussian random fields with varying local anisotropy. Statistica Sinica 25(1), 115–133 (2015) https://doi.org/10.5705/ss.2013.106w
  256. [258]Fuglstad, G.A., Simpson, D., Lindgren, F., Rue, H.: Does non-stationary spatial data always require non-stationary random fields? Spatial Statistics 14, 505–531 (2015) https://doi.org/10.1016/j.spasta.2015.10.001
  257. [259]de Carvalho Paludo, L., Bouvier, V., Cottereau, R.: Scalable parallel scheme for sampling of Gaussian random fields over very large domains. International Journal for Numerical Methods in Engineering 117(8), 845–859 (2019) https://doi.org/10.1002/nme.5981
  258. [260]Panunzio, A., Cottereau, R., Puel, G.: Large scale random fields generation using localized Karhunen–Loève expansion. Advanced Modeling and Simulation in Engineering Sciences 5, 1–29 (2018) https://doi.org/10.1186/s40323-018-0114-7
  259. [261]Rue, H.: Fast sampling of Gaussian Markov random fields. Journal of the Royal Statistical Society, Series B (Statistical Methodology) 63(2), 325–338 (2001) https://doi.org/10.1016/j.cma.2019.02.003
  260. [262]Lindgren, F., Rue, H., Lindström, J.: An explicit link between Gaussian fields and Gaussian Markov random fields: the SPDE approach. Journal of the Royal Statistical Society Series B 73(4), 423–498 (2011) https://doi.org/10.1111/j.1467-9868.2011.00777.x
  261. [263]Chow, E., Saad, Y.: Preconditioned Krylov subspace methods for sampling multivariate Gaussian distributions. SIAM Journal on Scientific Computing 36(2), 588–608 (2014) https: //doi.org/10.1137/130920587DOI
  262. [264]Aune, E., Eidsvik, J., Pokern, Y.: Iterative numerical methods for sampling from high dimensional Gaussian distributions. Statistics and Computing 23(4), 501–521 (2013) https://doi.org/10.1007/s11222-012-9326-8
  263. [265]Der Kiureghian, A., Ditlevsen, O.: Aleatory or epistemic? Does it matter? Structural Safety 31(2), 105–112 (2009) https://doi.org/10.1007/s00466-024-02573-2

Paper details

vlnc:W_yrgbwnwx
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents