betaFeedback

WorksPhysics and Astronomy

Theoretical analysis of a two-dimensional bilayer convection-diffusion-reaction-source problem

Abstract

This work investigates the two-dimensional thermal behavior of a bilayer medium subject to both internal and external heat sources. The model incorporates diffusion, advection, and temperature-dependent volumetric heat generation or absorption in each layer, as well as general convective conditions on the external boundaries. The influence of interfacial thermal resistance between the two materials is also considered. An analytical solution is developed using Fourier-based techniques, and a stable and convergent finite difference method is proposed to analyze particular scenarios. The theoretical results are validated against known solutions and numerical simulations, demonstrating consistency with the expected physical behavior. The findings contribute to a deeper understanding of heat transfer phenomena in layered systems and offer potential insights for optimizing thermal performance in engineering applications involving composite materials.

Nomenclature

Subscripts and Superscripts

0initial value
∞\inftystationary state
AArelative to the left boundary
BBrelative to the right boundary
HHhomogeneous system
iispatial grid position (numerical method)
jjspatial grid position (numerical method)
kktime grid position (numerical method)
mm (1, 2)layer number

nn — eigenvalue number

pp — eigenvalue number

xx — indicates in the xx direction

yy — indicates in the yy direction

Capital Letters

AA — auxiliary dimensionless parameter

BB — auxiliary dimensionless parameter

Aˉ\bar{A} — auxiliary temporal function

Bˉ\bar{B} — auxiliary temporal function

BiBi — Biot number

Bi∗Bi^{*} — auxiliary dimensionless parameter

Biˉ\bar{Bi} — auxiliary dimensionless parameter

CC — the specific heat at constant pressure [J(kg∘C)−1]\left[\mathrm{J}(\mathrm{kg}^{\circ}\mathrm{C})^{-1}\right]

DD — differential operator.

Dˉ\bar{D} — dimensionless differential operator

KK — auxiliary dimensionless parameter (Initial condition)

PeP_{e} — Péclet number

PP — auxiliary function (numerical method) $1$

P\mathcal{P} — partition (numerical method)

RR — related to the thermal resistance at the interface [m][\mathrm{m}]

Rˉ\bar{R} — dimensionless RR

SS — auxiliary dimensionless heat source

TT — temperature field relative to ambient $1$

TrT_{r} — reference temperature $1$

Lowercase Letters

ff — dimensionless auxiliary spatial function

gg — dimensionless auxiliary temporal function

hh — convection heat transfer coefficient [Wm−2(∘C)−1]\left[\mathrm{Wm}^{-2}({}^{\circ}\mathrm{C})^{-1}\right]

qq — auxiliary parameter

ss — heat source $2$

sˉ\bar{s} — dimensionless auxiliary heat source

s^\hat{s} — dimensionless heat source

tt — temporary variable [s][\mathrm{s}]

uu — dimensionless auxiliary spatial function

ww — body length in the yy direction [m][\mathrm{m}]

wˉ\bar{w} — dimensionless body length in the yy direction

xx — spatial variable in the xx direction [m][\mathrm{m}]

xˉ\bar{x} — dimensionless spatial variable in the xx direction

x1x_{1} — interface location [m][\mathrm{m}]

xˉ1\bar{x}_{1} — dimensionless interface location

x2x_{2} — body length in the xx direction [m][\mathrm{m}]

yy — spatial variable in the yy direction [m][\mathrm{m}]

SymbolDescription
yˉ\bar{y}dimensionless spatial variable in the yy direction
zzauxiliary parameter (numerical method)
Greek Letters
α\alphathermal diffusivity coefficient [m2s−1\mathrm{m}^{2}\mathrm{s}^{-1}]
αˉ\bar{\alpha}dimensionless thermal diffusivity coefficient
β\betafluid velocity [m s−1\mathrm{m}\,\mathrm{s}^{-1}]
χ\chiauxiliary dimensionless parameter
δ\deltaauxiliary dimensionless parameter
∇\nablaNabla operator
Δ\DeltaLaplacian operator
Δt\Delta ttime discretization step (numerical method) [s\mathrm{s}]
Δx\Delta xspatial discretization step (numerical method) [m\mathrm{m}]
Δy\Delta yspatial discretization step (numerical method) [m\mathrm{m}]
ϵ\epsilondimensionless spatial eigenvalue
η\etaauxiliary dimensionless parameter
γ\gammaauxiliary dimensionless parameter
ι\iotaauxiliary parameter (numerical method)
κ\kappathermal conductivity coefficient [W(m∘C)−1\mathrm{W}(\mathrm{m}^{\circ}\mathrm{C})^{-1}]
κˉ\bar{\kappa}dimensionless thermal conductivity coefficient
λ\lambdadimensionless temporal eigenvalue
Λ\Lambdaauxiliary parameter (numerical method) [W(m∘C)−1\mathrm{W}(\mathrm{m}^{\circ}\mathrm{C})^{-1}]
μ\muauxiliary dimensionless parameter
ν\nugeneration/consumption coefficient [s−1\mathrm{s}^{-1}]
νˉ\bar{\nu}dimensionless generation/consumption coefficient
ω\omegadimensionless spatial eigenvalue
Ω\Omegaproblem definition domain
Ωˉ\bar{\Omega}dimensionless problem definition domain
ϕ\phiauxiliary dimensionless parameter
Π\Piauxiliary parameter (numerical method) [m−1\mathrm{m}^{-1}]
ψ\psiauxiliary dimensionless parameter
ρ\rhodensity [kg m−3\mathrm{kg}\,\mathrm{m}^{-3}]
σ\sigmaauxiliary dimensionless parameter
τ\taudimensionless temporary variable
θ\thetadimensionless temperature
Θ\Thetadimensionless auxiliary temperature function
υ\upsilonauxiliary parameter (numerical method)
Υ\Upsilonauxiliary parameter (numerical method)
φ\varphiauxiliary dimensionless parameter
ξ\xiauxiliary dimensionless parameter
ζ\zetaauxiliary parameter (numerical method)

Table 3.

Introduction

The study of thermal and mass transport in multilayered systems has attracted significant attention in recent years, owing to its wide-ranging relevance across engineering, industrial, and scientific applications [1, 2, 3, 4, 5, 6]. These layered configurations appear in diverse contexts such as composite materials, porous media, electronic devices, biological tissues, and energy systems [7, 8, 9, 10, 11, 12, 13]. Research contributions span from textile engineering [14] and environmental remediation [15, 16, 17, 18], to biomedical applications like transdermal drug delivery and tumor modeling [19, 20, 21, 22, 23], and thermal management in high-performance systems [24, 25, 26, 27, 28].

A wide variety of mathematical models and solution techniques have been developed to describe such problems. Analytical approaches such as the separation of variables, recursive image methods, and transform-based methods are frequently used for simplified scenarios [3, 7, 29, 30, 31, 32, 33, 34, 35]. On the other hand, numerical schemes like finite difference and finite element methods are favored for handling complex boundary conditions and geometries [1, 7, 33]. Nevertheless, many studies in the literature focus exclusively on steady-state regimes [36, 37, 38, 39, 40], limiting their applicability to time-dependent phenomena.

One-dimensional models of diffusion in multilayered media are well established [41, 42, 43], and further complexity has been introduced by incorporating spatial or temporal variability in boundary conditions, chemical reactions, and convective terms [44, 45, 46, 47, 48, 49]. However, in many practical situations, thermal processes must be examined in two or three dimensions, particularly when the geometry or boundary effects play a significant role. Although two-dimensional heat transfer has been previously explored under idealized boundary conditions such as isothermal or adiabatic surfaces orthogonal to the layering direction [32, 50, 51, 52, 53], these works often exclude the full spectrum of realistic influences.

The existing literature, though rich in scope, still lacks comprehensive models that simultaneously account for multiple effects: transient behavior, convection, internal and external heat generation, and thermal resistance at interfaces. For instance, the work in [54] considers two-dimensional heat transfer in layered materials but omits the role of advection, interface resistance, external sources, and general convective boundary conditions—factors that may substantially alter system behavior.

To bridge this gap, the present study develops a detailed mathematical model for unsteady two-dimensional heat transfer in a bilayer structure, governed by a convection-diffusion-reaction-source (CDRS) equation. The formulation incorporates temperature-dependent internal heat generation, advective transport, external heat sources, thermal resistance at the material interface, and general convective conditions on the domain boundaries. Nonlinear effects may play a significant role and, depending on the materials composing the bilayer, can substantially alter its thermal behavior. Therefore, it is important to investigate such effects in specific cases (see, for instance, [55, 56]). In this study, only linear effects at the interface were considered, as incorporating nonlinearities into a general framework would add complexity and could hinder physical interpretation. An analytical solution is constructed using Fourier methods, and a robust finite difference scheme is implemented to simulate specific scenarios. The results aim to enhance theoretical insights and provide useful tools for the design and optimization of thermally complex multilayer systems.

Mathematical Modeling

The problem of interest concerns transient heat transfer in a two-dimensional bilayer body. Each layer is assumed to be homogeneous and isotropic. Additionally, internal heat generation or loss proportional to the local temperature, as well as advection due to fluid flow, are considered. External heat sources are also included in the model. Phenomena such as thermal runaway and radiative heat transfer are neglected.

The length of the bilayer body is denoted by x2x_2. The interface between the two materials is located at x1x_1, where x2>x1x_2 > x_1. The thickness of the body in the yy-direction is denoted by ww. A schematic representation of the problem is shown in Figure 1.

General scheme of the problem of interest

Figure 1. General scheme of the problem of interest.

The transient energy conservation equation, which accounts for diffusion, advection, internal heat generation or loss, and external heat sources in a two-dimensional bilayer body, is given by:

{∂T1∂t(x,y,t)=D1T1(x,y,t)+s1(x,y,t),(x,y,t)∈Ω1,∂T2∂t(x,y,t)=D2T2(x,y,t)+s2(x,y,t),(x,y,t)∈Ω2.(1)\begin{cases} \frac{\partial T_{1}}{\partial t}(x,y,t)=D_{1}T_{1}(x,y,t)+s_{1}(x,y,t), \quad(x,y,t)\in\Omega_{1},\\ \frac{\partial T_{2}}{\partial t}(x,y,t)=D_{2}T_{2}(x,y,t)+s_{2}(x,y,t), \quad(x,y,t)\in\Omega_{2}. \tag*{(1)} \end{cases}

where, for m=1,2m=1,2, Ωm=(xm−1,xm)×(0,w)×R+\Omega_{m}=(x_{m-1},x_{m})\times(0,w)\times\mathbb{R}^{+}, and DmD_{m} is a parabolic differential operator previously used in [57], defined as

DmTm(x,y,t):=αmΔ(Tm)(x,y,t)−βm⋅∇(Tm)(x,y,t)+νmTm(x,y,t),(2)D_{m}T_{m}(x,y,t):=\alpha_{m}\Delta(T_{m})(x,y,t)-\beta_{m}\cdot\nabla(T_{m})(x,y,t)+\nu_{m}T_{m}(x,y,t), \tag*{(2)}

where

{Δ(Tm)(x,y,t):=∂2Tm(x,y,t)∂x2+∂2Tm(x,y,t)∂y2,∇(Tm)(x,y,t):=(∂Tm(x,y,t)∂x,∂Tm(x,y,t)∂y).(3)\begin{cases} \Delta(T_{m})(x,y,t):=\frac{\partial^{2}T_{m}(x,y,t)}{\partial x^{2}}+\frac{\partial^{2}T_{m}(x,y,t)}{\partial y^{2}},\\ \nabla(T_{m})(x,y,t):=\left(\frac{\partial T_{m}(x,y,t)}{\partial x},\frac{\partial T_{m}(x,y,t)}{\partial y}\right). \tag*{(3)} \end{cases}

References

  1. [1]W.-b. Yuan, N. Yu, L.-y. Li, Y. Fang, Heat transfer analysis in multi-layered materials with interfacial thermal resistance. Composite Structures 293 (2022), 115728. https://doi.org/10.1016/j.compstruct.2022.115728
  2. [2]J.K. Carson, Modelling thermal diffusivity of heterogeneous materials based on thermal diffusivities of components with implications for thermal diffusivity and thermal conductivity measurement. International Journal of Thermophysics 43 (2022), 108. https://doi.org/10.1007/s10765-022-03037-6
  3. [3]L. Zhou, M. Parhizi, A. Jain, Theoretical modeling of heat transfer in a multilayer rectangular body with spatially-varying convective heat transfer boundary condition. International Journal of Thermal Sciences 170 (2021), 107156. https://doi.org/10.1016/j.ijthermalsci.2021.107156
  4. [4]L. Zhou, M. Parhizi, A. Jain, Temperature distribution in a multi-layer cylinder with circumferentially-varying convective heat transfer boundary conditions. International Journal of Thermal Sciences 160 (2021), 106673. https://doi.org/10.1016/j.ijthermalsci.2020.106673
  5. [5]Y.A. Cengel, Heat and mass transfer: A practical approach. McGraw-Hill, New York (2007).
  6. [6]R. Yavaraj, D. Senthilkumar, Numerical analysis of non-Fourier heat conduction dynamics in the composite layer. Journal of Mechanical Engineering and Sciences 17(3) (2023), pp. 9597–9615. https://doi.org/10.15282/jmes.17.3.2023.6.0760
  7. [7]R.I. Hickson, S.I. Barry, G.N. Mercer, Critical times in multilayer diffusion. Part 1: Exact solutions. International Journal of Heat and Mass Transfer 52 (2009), pp. 5776–5783. https://doi.org/10.1016/j.ijheatmasstransfer.2009.08.013
  8. [8]D.W. Hahn, M.N. Özisik, Heat Conduction. 3rd. Ed., John Wiley & Sons, (2012). http://dx.doi.org/10.1002/9781118411285
  9. [9]S. Kakac, Y. Yener, Heat Conduction. 2nd. Ed., Hemisphere Press, (1985).
  10. [10]M. Cavalcante, S. Marques, M.-J. Pindera, Transient thermomechanical analysis of a layered cylinder by the parametric finite-volume theory. Journal Thermal Stresses 32 (2008), pp. 112–134. https://doi.org/10.1080/01495730802540783
  11. [11]S.M. Becker, H. Herwig, One dimensional transient heat conduction in segmented fin-like geometries with distinct discrete peripheral convection. International Journal of Thermal Sciences 71 (2013), pp. 148–162. https://doi.org/10.1016/j.ijthermalsci.2013.04.004
  12. [12]R. Pasupuleti, Y. Wang, I. Shabalin, L.Y. Li, Z. Liu, S. Grove, Modelling of moisture diffusion in multilayer woven fabric composites. Computational Materials Science 50(5) (2011), pp. 1675–1680. https://doi.org/10.1016/j.commatsci.2010.12.028
  13. [13]L. Choobineh, A. Jain, An explicit analytical model for rapid computation of temperature field in a three-dimensional integrated circuit (3D IC). International Journal of Thermal Sciences 87 (2015), pp. 103–109. https://doi.org/10.1016/j.ijthermalsci.2014.08.012
  14. [14]J.F. Caunce, S.I. Barry, G.N. Mercer, A spatially dependent model for washing wool. Applied Mathematical Modelling 32(4) (2008), pp. 389–404. https://doi.org/10.1016/j.apm.2006.12.010
  15. [15]H. French, Heat transfer and fluid flow in nuclear systems. 1st Ed., Pergamon Press, (1981). https://doi.org/10.13182/NT8-3-A33154
  16. [16]C. Liu, W.P. Ball, Analytical modeling of diffusion-limited contamination and decontamination in a two-layer porous medium. Advances in Water Resources 21(4) (1998), pp. 297–313. https://doi.org/10.1016/S0309-1708(96)00062-0
  17. [17]G. Liu, B.C. Si, Analytical modeling of one-dimensional diffusion in layered systems with position-dependent diffusion coefficients. Advances in Water Resources 31(2) (2008), pp. 251–268. https://doi.org/10.1016/j.advwatres.2007.08.008
  18. [18]L. Ferragut, M.I. Asensio, J.M. Cascón, D. Prieto, J. Ramírez, An efficient algorithm for solving a multi-layer convection–diffusion problem applied to air pollution problems. Advances in Engineering Software 65 (2013), pp. 191–199. https://doi.org/10.1016/j.advengsoft.2013.06.010
  19. [19]S. Mitragotri, Y.G. Anissimov, A.L. Bunge, H.F. Frasch, R.H. Guy, J. Hadgraft, G.B. Kasting, M.E. Lane, M.S. Roberts, Mathematical models of skin permeability: An overview. International Journal of Pharmaceutics 418(1) (2011), pp. 115–129. https://doi.org/10.1016/j.ijpharm.2011.02.023
  20. [20]S. McGinty, S. McKee, R.M. Wadsworth, C. McCormick, Modelling drug-eluting stents. Mathematical Medicine and Biology 28(1) (2011), pp. 1–29. https://doi.org/10.1093/imammb/dqq003
  21. [21]S. McGinty, A decade of modelling drug release from arterial stents. Mathematical Biosciences 257 (2011), pp. 80–90. https://doi.org/10.1016/j.mbs.2014.06.016
  22. [22]A. Jain, S. McGinty, G. Pontrelli, L. Zhou, Theoretical modeling of endovascular drug delivery into a multilayer arterial wall from a drug-coated balloon. International Journal Heat Mass Transfer 187 (2022), 122572. https://doi.org/10.1016/j.ijheatmasstransfer.2022.122572
  23. [23]D. Mantzavinos, M.G. Papadomanolaki, Y.G. Saridakis, A.G. Sifalakis, Fokas transform method for a brain tumor invasion model with heterogeneous diffusion in 1 + 1 dimensions. Applied Numerical Mathematics 104 (2016), pp. 47–61. https://doi.org/10.1016/j.apnum.2014.09.006
  24. [24]T.M. Bandhauer, S. Garimella, T.F. Fuller, A critical review of thermal issues in Lithium-ion batteries. Journal of The Electrochemical Society 158(3) (2011), pp. R1–R25. http://dx.doi.org/10.1149/1.3515880
  25. [25]K. Shah, D. Chalise, A. Jain, Experimental and theoretical analysis of a method to predict thermal runaway in Li-ion cells. Journal of Power Sources 330 (2016), pp. 167–174. https://doi.org/10.1016/j.jpowsour.2016.08.133
  26. [26]K. Shah, V. Vishwakarma, A. Jain, Measurement of multiscale thermal transport phenomena in Li-ion cells: A review. Journal of Electrochemical Energy Conversion and Storage 13(3) (2016). https://doi.org/10.1115/1.4034413
  27. [27]G. Krishnan, M. Parhizi, M. Pathak, Solution phase limited diffusion modeling in a li-ion cell subject to concentration-dependent pore wall flux. Journal of The Electrochemical Society 168(9) (2021), 090511. https://doi.org/10.1149/1945-7111/ac1cfb
  28. [28]V.R. Subramanian, D. Tapriyal, R.E. White, A boundary condition for porous electrodes. Electrochemical and Solid-State Letters 7(9) (2004), A259. https://doi.org/10.1149/1.1773751
  29. [29]F. de Monte, Transient heat conduction in one-dimensional composite slab. A ‘natural’ analytic approach. International Journal of Heat and Mass Transfer 43(19) (2000), pp. 3607–3619. https://doi.org/10.1016/S0017-9310(00)00008–9
  30. [30]F. de Monte, An analytic approach to the unsteady heat conduction processes in one-dimensional composite media. International Journal of Heat and Mass Transfer 45(6) (2002), pp. 1333–1343. https://doi.org/10.1016/S0017-9310(01)00226–5
  31. [31]C.J. Dias, A method of recursive images to solve transient heat diffusion in multilayer materials. International Journal of Heat and Mass Transfer 85 (2015), pp. 1075–1083. http://dx.doi.org/10.1016/j.ijheatmasstransfer.2015.01.138
  32. [32]C-C. Ma, S-W. Chang, Analytical exact solutions of heat conduction problems for anisotropic multilayered media. International Journal of Heat and Mass Transfer 47(8) (2004), pp. 1643–1655. https://doi.org/10.1016/j.ijheatmasstransfer.2003.10.022
  33. [33]D. Rubio, D.A. Tarzia, G.F. Umbricht, Heat transfer process with solid-solid interface: Analytical and numerical solutions. WSEAS Transactions on Mathematics 20 (2021), pp. 404–414. https://doi.org/10.37394/23206.2021.20.42
  34. [34]R.B. Goldner, K.K. Wong, T.E. Haas, One-dimensional diffusion into a multilayer structure: An exact solution for a bilayer. Journal of Applied Physics 72 (1992), pp. 4674–4676. https://doi.org/10.1063/1.352072
  35. [35]O.K. Dudko, A.M. Berezhkovskii, G.H. Weiss, Diffusion in the presence of periodically spaced permeable membranes. The Journal of Chemical Physics 121(22) (2004), pp. 11283–11288. https://doi.org/10.1063/1.1814055
  36. [36]G.F. Umbricht, D. Rubio, D.A. Tarzia, Determination of thermal conductivities in multilayer materials. WSEAS Transactions on Heat and Mass Transfer 17 (2022), pp. 188–195. https://doi.org/10.37394/232012.2022.17.20
  37. [37]D. Rubio, G.F. Umbricht, N. Saintier, M. Morvidone, D.A. Tarzia, Non-invasive study to determine changes in physical properties of multilayer materials. MRS Advances 7 (2022), pp. 1115–1119. https://doi.org/10.1557/s43580-022-00463-4
  38. [38]G.F. Umbricht, D.A. Tarzia, D. Rubio, Determination of two homogeneous materials in a bar with solid-solid interface. Mathematical Modelling of Engineering Problems 9(3) (2022), pp. 568–576. https://doi.org/10.18280/mmep.090302
  39. [39]G.F. Umbricht, D. Rubio, D.A. Tarzia, Estimation of a thermal conductivity in a stationary heat transfer problem with a solid-solid interface. International Journal of Heat and Technology 39(2) (2021), pp. 337–344. https://doi.org/10.18280/ijht.390202
  40. [40]G.F. Umbricht, D. Rubio, D.A. Tarzia, Estimation technique for a contact point between two materials in stationary heat transfer problem. Mathematical Modelling of Engineering Problems 7(4) (2020), pp. 607–613. https://doi.org/10.18280/mmep.070413
  41. [41]M. Norouzi, A. Amiri Delouei, M. Seilsepour, A general exact solution for heat conduction in multilayer spherical composite laminates. Composite Structures 106 (2013), pp. 288–295. https://doi.org/10.1016/j.compstruct.2013.06.005
  42. [42]A. Amiri Delouei, M.H. Kayhani, M. Norouzi, Exact analytical solution of unsteady axisymmetric conductive heat transfer in cylindrical orthotropic composite laminates. International Journal of Heat and Mass Transfer 55(15–16) (2012), pp. 4427–4436. https://doi.org/10.1016/j.ijheatmasstransfer.2012.04.012
  43. [43]A.S. Kim, Complete analytic solutions for convection-diffusion-reaction-source equations without using an inverse Laplace transform. Scientific Reports 10 (2020), 8040. https://doi.org/10.1038/s41598-020-63982-7
  44. [44]P.K. Jain, S. Singh, Rizwan-uddin, Analytical solution to transient asymmetric heat conduction in a multilayer annulus. ASME Journal of Heat and Mass Transfer 131(1) (2009), 011304. https://doi.org/10.1115/1.2977553
  45. [45]B. Yang, S. Liu, Closed-form analytical solutions of transient heat conduction in hollow composite cylinders with any number of layers. International Journal of Heat and Mass Transfer 108(A) (2017), pp. 907–917. https://doi.org/10.1016/j.ijheatmasstransfer.2016.12.020
  46. [46]S. Singh, P.K. Jain, Rizwan-uddin, Finite integral transform method to solve asymmetric heat conduction in a multilayer annulus with time-dependent boundary conditions. Nuclear Engineering and Design 241(1) (2017), pp. 144–154. https://doi.org/10.1016/j.nucengdes.2010.10.010
  47. [47]S. Singh, P.K. Jain, Rizwan-uddin, Heat conduction problem in a two-layered hollow cylinder by using the Green’s function method. Journal of Applied Mathematics and Computational Mechanics 12(2) (2013), pp. 45–50. https://doi.org/10.17512/jamcm.2013.2.06
  48. [48]H. Qian, D. Zhou, W. Liu, W. Lu, H. Feng, Thermal stresses in layered thick cylindrical shells of infinite length. Journal of Thermal Stresses 40(3) (2017), pp. 322–343. https://doi.org/10.1080/01495739.2016.1269623
  49. [49]M.H. Kayhani, M. Norouzi, A. Amiri Delouei, A general analytical solution for heat conduction in cylindrical multilayer composite laminates. International Journal of Thermal Sciences 52 (2012), pp. 73–82. https://doi.org/10.1016/j.ijthermalsci.2011.09.002
  50. [50]Z. Annasabi, F. Erchiqui, 3D hybrid finite elements for anisotropic heat conduction in a multi-material with multiple orientations of the thermal conductivity tensors. International Journal of Heat and Mass Transfer 158 (2020), 119795. https://doi.org/10.1016/j.ijheatmasstransfer.2020.119795
  51. [51]A. Zukauskas, J. Ziugzda, Heat transfer of a cylinder in crossflow. Hemisphere Publishing, New York (1985).
  52. [52]D. Sarkar, K. Shah, A. Haji-Sheikh, A. Jain, Analytical modeling of temperature distribution in an anisotropic cylinder with circumferentially-varying convective heat transfer. International Journal of Heat and Mass Transfer 79 (2014), pp. 1027–1033. https://doi.org/10.1016/j.ijheatmasstransfer.2014.08.060
  53. [53]G. Krishnan, A. Jain, Theoretical analysis of a two-dimensional multilayer diffusion problem with general convective boundary conditions normal to the layered direction. International Journal of Heat and Mass Transfer 202 (2023), 123723. https://doi.org/10.1016/j.ijheatmasstransfer.2022.123723
  54. [54]G. Krishnan, A. Jain, Diffusion and reaction in a two-dimensional multilayer body: analytical solution and imaginary eigenvalue analysis. International Journal of Heat and Mass Transfer 196 (2022), 123163. https://doi.org/10.1016/j.ijheatmasstransfer.2022.123163
  55. [55]Y. Xu, B.-Y. Cao, Y. Zhou, Near-interface effects on interfacial phonon transport: Competition between phonon-phonon interference and phonon-phonon scattering. International Journal of Heat and Mass Transfer 232 (2024), 125943. https://doi.org/10.1016/j.ijheatmasstransfer.2024.125943
  56. [56]Y. Xu, Y. Zhou, Metric for quantifying elastic and inelastic thermal transport at interfaces. Physical Review B 110(11) (2024), 115305. https://doi.org/10.1103/PhysRevB.110.115305
  57. [57]G.F. Umbricht, D. Rubio, Optimal estimation of thermal diffusivity in an energy transfer problem. WSEAS Transactions on Fluid Mechanics 16 (2021), pp. 222–231. https://doi.org/10.37394/232013.2021.16.21
  58. [58]H.A. Basha, F.S. El Habel, Analytical solution of the one-dimensional time-dependent transport equation. Water Resources Research 29(9) (1993), pp. 3209–3214. https://doi.org/10.1029/93WR01038
  59. [59]V.K. Bharati, V.P. Singh, A. Sanskritsyayn, N. Kumar, Analytical solution of advection-dispersion equation with spatially dependent dispersivity. Journal of Engineering Mechanics 143(11) (2017), pp. 1–11. http://dx.doi.org/10.1061/(asce)em.1943-7889.0001346
  60. [60]P. Das, S. Begam, M.K. Singh, Mathematical modeling of groundwater contamination with varying velocity field. Journal of Hydrology and Hydromechanics 65(2) (2017), pp. 192–204. https://doi.org/10.1515/johh-2017-0013
  61. [61]A. Sanskritsyayn, H. Suk, N. Kumar, Analytical solutions for solute transport in groundwater and riverine flow using Greens function method and pertinent coordinate transformation method. Journal of Hydrology 547 (2017), pp. 517–533. https://doi.org/10.1016/j.jhydrol.2017.02.014
  62. [62]A. Jain, L. Zhou, M. Parhizi, Multilayer one-dimensional Convection-Diffusion-Reaction (CDR) problem: Analytical solution and imaginary eigenvalue analysis. International Journal of Heat and Mass Transfer 177 (2021), 121465. https://doi.org/10.1016/j.ijheatmasstransfer.2021.121465
  63. [63]G.F. Umbricht, D. Rubio, D.A. Tarzia, Bilayer one-dimensional Convection-Diffusion-Reaction-Source problem: Analytical and numerical solution. International Journal of Thermal Sciences 208 (2025), 109471. https://doi.org/10.1016/j.ijthermalsci.2024.109471
  64. [64]G.F. Umbricht, D.A. Tarzia, D. Rubio, Analytical and numerical study of a convection-diffusion-reaction-source problem in multilayered materials. International Journal of Thermal Sciences 211 (2025), 109690. https://doi.org/10.1016/j.ijthermalsci.2025.109690
  65. [65]I. Esho, K. Shah, A. Jain, Measurements and modeling to determine the critical temperature for preventing thermal runaway in Li-ion cells. Applied Thermal Engineering 145 (2018), pp. 287–294. https://doi.org/10.1016/j.applthermaleng.2018.09.016
  66. [66]K.W. Morton, D.F. Mayers, Numerical solution of partial differential equations. Cambridge University Press, Cambridge (2005). http://dx.doi.org/10.1017/CBO9780511221248
  67. [67]G.F. Umbricht, D. Rubio, R. Echarri, C. El Hasi, A technique to estimate the transient coefficient of heat transfer by convection. Latin American Applied Research 50(3) (2020), pp. 229–234. https://doi.org/10.52292/j.laar.2020.179

Paper details

vlnc:W_z8kde29f
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents