betaFeedback

WorksMathematics

Uniqueness of Ricci flows from singular initial data

Abstract

We establish uniqueness of Ricci flows with non-negative sectional curvatures and scaling invariant curvature bounds, assuming that the induced distance functions converge to the same initial distance function up to isometry. In the compact case, restricting the size of the initial singular set, we also establish uniqueness under suitable weaker conditions.

Introduction

Let (Mn,g0)(M^n,g_0) be a smooth, complete Riemannian manifold. A Ricci flow starting at g0g_0 is a smooth one parameter family of metrics (g(t))t∈[0,T)(g(t))_{t\in[0,T)} such that

∂tg(t)=−2Ric⁡(g(t)),g(0)=g0.\partial_tg(t)=-2\operatorname{Ric}(g(t)),\qquad g(0)=g_0.

Introduced by Hamilton [25], it constitutes a nonlinear heat equation for the metric and has proven to be a highly successful tool in differential geometry and topology.

While many of these results rely on understanding the singularity formation and long-time behaviour of the flow, Ricci flow has also emerged as an important tool to construct smoothings of initial singular spaces while preserving suitable lower curvature bounds and geometric control. Important examples include the proof of the Anderson–Cheeger–Colding–Tian conjecture on the structure of volume non-collapsed 3-dimensional Ricci limit spaces by Simon–Topping [41, 42] (building on the work of Hochard [27]) and the proof of Petrunin’s smoothing conjecture for non-negatively curved polyhedral spaces by Lebedeva–Matveev–Petrunin–Shevchishin in dimension three [32] and recently in all dimensions by Bamler–Cabezas-Rivas [3]. Further examples of Ricci flows and Ricci–DeTurck flows constructed starting from singular initial spaces include [4, 14, 21, 28, 31, 30, 35, 34, 39, 40, 46].

To date only little is known about the uniqueness of Ricci flows starting from singular initial data. Our first theorem establishes uniqueness of Ricci flows with non-negative sectional curvature and scaling invariant curvature estimates.

Theorem 1.1. Let g(t)g(t) and g~(t)\widetilde{g}(t), t∈(0,T]t \in(0,T], be complete smooth solutions to the Ricci flow on the manifolds MM and M~\widetilde{M}, respectively. Suppose that there exists α>0\alpha> 0 such that

(i) sec⁡(g(t)),sec⁡(g~(t))≥0\operatorname{sec}(g(t)),\operatorname{sec}(\widetilde{g}(t)) \ge0;

(ii) sup⁡M∣Rm⁡(g(t))∣+sup⁡M~∣Rm⁡(g~(t))∣≤αt−1\sup_M |\operatorname{Rm}(g(t))|+\sup_{\widetilde{M}}|\operatorname{Rm}(\widetilde{g}(t))| \le\alpha t^{-1}

for t∈(0,T]t \in(0,T]. Denote

d0:=lim⁡t→0+dg(t),d~0:=lim⁡t→0+dg~(t)d_0:=\lim_{t\to0^+}d_{g(t)},\qquad\widetilde{d}_0:=\lim_{t\to0^+}d_{\widetilde{g}(t)}

to be the limiting initial distances on MM and M~\widetilde{M} respectively. Assume Φ:(M,d0)→(M~,d~0)\Phi:(M,d_0)\to(\widetilde{M},\widetilde{d}_0) is an isometry. Then Φ\Phi is a smooth diffeomorphism that satisfies Φ∗g~(t)=g(t)\Phi^*\widetilde{g}(t)=g(t) for all t∈(0,T]t\in(0,T].

Remark 1.2. (a) Note that we make no further assumption on the structure of the initial data in the above statement.

(b) The existence of the limiting initial distances and uniform attainment follows from Lemma 2.1.

(c) Note that for n≥4n\ge4 non-negative sectional curvature is in general not preserved under Ricci flow. Nevertheless, the conditions of non-negative curvature operator or non-negative complex sectional curvature are preserved and both imply non-negative sectional curvature.

(d) By work of Deruelle [17] expanding gradient Ricci solitons with non-negative curvature operator coming out of a metric cone with link (Sn−1,γ)(\mathbb{S}^{n-1},\gamma), where γ\gamma is a smooth metric on Sn−1\mathbb{S}^{n-1} with curvature operator greater or equal than one, exist and are unique. The above theorem gives an alternative proof of uniqueness without assuming smoothness of the link.

Our second theorem allows to relax the lower bound on the curvature by restricting the size of the initial singular set. To state it we consider the cone CPIC2\mathrm{C}_{\mathrm{PIC2}} of weakly PIC2 algebraic curvature operators (also known as non-negative complex sectional curvature) and Id\mathrm{Id} the identity curvature operator with sectional curvatures equal to one (see [43] for further exposition).

Theorem 1.3. Let MnM^n be a compact smooth manifold with distance d0d_0 that generates the same topology as MM. Let Σ⋐M\Sigma\Subset M be closed and g0g_0 be a smooth metric on Mreg:=M∖ΣM_{\mathrm{reg}}:=M\setminus\Sigma which is locally compatible with d0d_0, such that

(i) Hd0n(Σ)=0\mathcal{H}_{d_0}^n(\Sigma)=0;

(ii) Vol⁡g0(Mreg)<+∞\operatorname{Vol}_{g_0}(M_{\mathrm{reg}})<+\infty;

(iii) there exists an open set U⊃ΣU\supset\Sigma such that Rm⁡g0∈CPIC2\operatorname{Rm}_{g_0}\in\mathrm{C}_{\mathrm{PIC2}} on U∖ΣU\setminus\Sigma.

Suppose g(t)g(t) and g~(t)\widetilde{g}(t) are Ricci flows on M×(0,T]M\times(0,T] such that

(a) dg(t),dg~(t)→d0d_{g(t)},d_{\widetilde{g}(t)}\to d_0 uniformly on M×MM\times M as t↘0t\searrow0;

(b) g(t),g~(t)→g0g(t),\widetilde{g}(t)\to g_0 in Cloc∞(Mreg)C^\infty_{\mathrm{loc}}(M_{\mathrm{reg}}) as t↘0t\searrow0;

(c) sup⁡M∣Rm⁡(g(t))∣+∣Rm⁡(g~(t))∣≤αt−1\sup_M|\operatorname{Rm}(g(t))|+|\operatorname{Rm}(\widetilde{g}(t))|\le\alpha t^{-1} for some α>0\alpha>0;

(d) Rm⁡(g(t))+Id,Rm⁡(g~(t))+Id∈CPIC2\operatorname{Rm}(g(t))+\mathrm{Id},\operatorname{Rm}(\widetilde{g}(t))+\mathrm{Id}\in\mathrm{C}_{\mathrm{PIC2}}.

Then g(t)=g~(t)g(t)=\widetilde{g}(t) on M×(0,T]M\times(0,T].

Remark 1.4. (a) Note that Rm(g)+Id∈CPIC2\mathrm{Rm}(g)+\mathrm{Id}\in\mathrm{CPI}_{C^2} implies that Ric⁡(g)\operatorname{Ric}(g) is uniformly bounded from below and thus Lemma 2.1 together with (b) – (d) gives the existence of a limiting initial distance for both flows.

(b) Considering the flows from compact polyhedral spaces constructed in [32] and [3], Theorem 1.3 gives uniqueness in the class of flows satisfying conditions (a) – (d).

In the compact case, uniqueness of Ricci flows for smooth initial metrics was first established by Hamilton [25] and later simplified by DeTurck [18]. In the non-compact case for solutions with bounded curvature initially and uniformly throughout the evolution, uniqueness was resolved by Chen–Zhu [12], see also the proof via energy methods by Kotschwar [29]. More recently, the second named author established uniqueness in the non-compact case for potentially unbounded initial curvature together with scaling invariant curvature bounds in [33].

For non-smooth initial data in dimension two, Topping and Yin obtained uniqueness for Ricci flows starting from non-atomic Radon measures [44]. In higher dimensions uniqueness for initial limit spaces with two-sided sectional curvature bounds was proven by Corro, Moreno, and Zarei in [16], provided the flows also have uniform two-sided sectional curvature bounds. For uniformly volume non-collapsed flows with scaling invariant curvature bounds und a uniform lower bound on the sectional curvature coming out of Reifenberg spaces, uniqueness was recently established by the first-named author in [20].

Outline of proof. We employ a similar strategy as in [12, 33, 20], by constructing a harmonic map heat flow F:M×(0,T]→M~F:M\times(0,T]\to\widetilde{M} such that

∂tF=Δg(t),g~(t)F\partial_tF=\Delta_{g(t),\widetilde{g}(t)}F

with F(x,t)→Φ(x)F(x,t)\to\Phi(x) as t→0t\to0 (where we take Φ=id⁡\Phi=\operatorname{id} in the case of Theorem 1.3). In particular, FF is constructed by starting at a positive time t>0t>0, smoothing out the map Φ:(M,g(t))→(M~,g~(t))\Phi:(M,g(t))\to(\widetilde{M},\widetilde{g}(t)) to give derivative bounds, flowing this map via harmonic map heat flow, and using the derivative bounds and parabolic regularity to take a smooth limit as t→0t\to0. However, unlike as in [20], we use the standard heat flow to obtain a smoothing of Φ\Phi with suitable estimates. The main further important ingredient is an extension of the estimate by Bamler–Brendle [1] to control the optimal local Lipschitz constant of the map FF, while allowing for unbounded curvature. This allows to establish that the limiting map F(⋅,t)F(\cdot,t) is 1-Lipschitz and homotopy equivalent to the initial isometry for all t>0t>0. In the compact case, using that the degree of F(⋅,t)F(\cdot,t) has to be one, and comparing the volumes yields that F(⋅,t)F(\cdot,t) is an isometry for all t>0t>0 and thus constant in time. In the noncompact case, we show that by evolving spherical Busemann functions via the heat equation along the flow, we are able to construct a suitable weighted volume to extend the above argument to this case as well. Note that this differs from the further strategy in both [33, 20] which depended on stability estimates for Ricci-DeTurck flow.

The paper is structured as follows. In §2, we recall properties of the distance function under Ricci flow, and in §3, we give some useful evolution equations for harmonic map heat flow. Then in §4, we perform the smoothing of Φ\Phi using heat flow methods. In §5, we prove Theorem 1.1 in the compact case, by constructing the harmonic map heat flow FF and comparing the volumes of (M,g(t))(M,g(t)) and (M~,g~(t))(\widetilde{M},\widetilde{g}(t)). We prove Theorem 1.3 in §6, by using (almost) nonnegative curvature together with heat kernel estimates to control FF near the singular set Σ\Sigma, and smoothness back to time t=0t=0 to control FF away from Σ\Sigma. Again, comparing the volumes of (M,g(t))(M,g(t)) and (M~,g~(t))(\widetilde{M},\widetilde{g}(t)) gives additional control on FF, which allows us to use properties of the Ricci-DeTurck flow F∗g(t)F_*g(t) to prove Theorem 1.3. Finally, in §7, we prove the noncompact case of Theorem 1.1, by evolving the spherical Busemann functions via the heat equation along the flows to construct a suitable weighted volume to extend the previous argument to this case.

Acknowledgments. L. Flower is supported by the Warwick Mathematics Institute Centre for Doctoral Training, and gratefully acknowledges funding from the University of Warwick and the UK Engineering and Physical Sciences Research Council (Grant number: EP/W524645/1). M.-C. Lee is supported by Hong Kong RGC grants No. 14300623 and No. 14304225, and an Asian Young Scientist Fellowship. F. Schulze has received funding by the European Union (European Research Council (ERC), GENREG – 101200301). Views and opinions expressed are however those of the authors only and do not necessarily reflect those of the European Union or the European Research Council. Neither the European Union nor the granting authority can be held responsible for them.

AI disclosure. An initial version of the full proof with a more ad-hoc smoothing in the compact case with isolated conical singularities is due to the authors. The idea of smoothing the initial isometry via the standard heat flow was suggested by an LLM, together with a strategy in case the initial data is given by a metric cone. The idea to evolve the Busemann function by the heat flow coupled to Ricci flow to obtain a suitable weighted volume in the non-compact case is again due to the authors.

The authors retain full responsibility for the correctness of the final work. This article does not contain any AI written text.

Canonical distance induced from Ricci flow

In this section, we discuss the distance which is canonically induced by the Ricci flow. We consider a Ricci flow solution g(t)g(t), t∈(0,T]t \in(0,T] defined on a smooth manifold MM. In our setting, the distance dg(t)d_{g(t)} as t→0t \to0 is non-degenerating and defines a distance on MM. The following is proved by Simon-Toping [41], building on the distance estimates of Hamilton [26].

References

  1. [1]Bamler, R. H.; Brendle, S., A comparison principle for solutions to the Ricci flow. Math. Res. Lett. 22 (2015), no. 4, 983–988DOI
  2. [2]Bamler, R. H.; Cabezas-Rivas, E.; Wilking, B., The Ricci flow under almost non-negative curvature conditions. Invent. Math. 217 (2019), no. 1, 95–126.arxiv.org/abs/1707.03002
  3. [3]Bamler, R. H.; Cabezas-Rivas, E., Smoothing polyhedral spaces via Ricci flow. arXiv:2609.37549.
  4. [4]Burkhardt-Guim, P., Pointwise lower scalar curvature bounds for C⁰ metrics via regularizing Ricci flow
  5. [5]Calabi, E.; Hartman, P., On the smoothness of isometries. Duke Math. J. 37 (1970), 741–750.DOI
  6. [6]Chan, P.-Y.; Lai, Y.; Lee, M.-C., Higher-dimensional flying wing Steady Ricci Solitons. arXiv:2510.23005
  7. [7]Chan, P.-Y.; Lee, M.-C., Gap theorem on Riemannian manifolds using Ricci flow. Adv. Math. 482 (2025), part C, Paper No. 110625, 40 pp.arxiv.org/abs/2305.01396
  8. [8]Chan, P.-Y.; Lee, M.-C.; Luke T. P., Expanding Ricci solitons coming out of weakly PIC1 metric cones, arXiv:2404.12755.arxiv.org/abs/2404.12755
  9. [9]Cheeger, J.; Gromoll, D., On the structure of complete manifolds of nonnegative curvature. Ann. of Math. 96 (1972), no. 3, 413–443.DOI
  10. [10]Cheeger, J.; Gromov, M.; Taylor, M., Finite propagation speed, kernel estimates for functions of the Laplace operator, and the geometry of complete Riemannian manifolds. J. Differential Geom. 17 (1982), no. 1, 15–53.
  11. [11]Chen, B.-L., Strong uniqueness of the Ricci flow. J. Differential Geom. 82 (2009) 363–382.arxiv.org/abs/0706.3081
  12. [12]Chen, B.-L.; Zhu, X.-P., Uniqueness of the Ricci flow on complete noncompact manifolds. J. Differential Geom. 74 (2006), no. 1, 119–154.DOI
  13. [13]Chow, B.; Lu, P.; Ni, L., Hamilton’s Ricci flow. American Mathematical Society, Providence, RI; Science Press Beijing, New York, 2006, xxxvi+608 pp.DOI
  14. [14]Chu, J.; Lee, M.-C., Ricci-DeTurck flow from rough metrics and applications to scalar curvature problems. J. Funct. Anal. 289 (2025), no. 2, Paper No. 110916, 41 pp.DOI
  15. [15]Colding, T. H., Ricci curvature and volume convergence. Ann. of Math. (2) 145 (1997), no. 3, 477–501.DOI
  16. [16]Corro, D.; Moreno, A.; Zarei, M., Ricci flow from singular spaces with bounded curvature, arXiv:2503.05896.
  17. [17]Deruelle, A., Smoothing out positively curved metric cones by Ricci expanders. Geom. Funct. Anal. 26 (2016), no. 1, 188–249.arxiv.org/abs/1502.07921
  18. [18]DeTurck, D., Deforming metrics in the direction of their Ricci tensors. J. Diff. Geom. 18 (1983), 157–16.
  19. [19]Drees, G., Asymptotically flat manifolds of nonnegative curvature. Differential Geom. Appl. 4 (1994), no. 1, 77–90.DOI
  20. [20]Flower, L. O., On the uniqueness of Ricci flows from certain Alexandrov spaces. arXiv:2610.03129
  21. [21]Giesen, G.; Topping, P. M., Existence of Ricci flows of incomplete surfaces. Comm. Partial Differential Equations 36 (2011), no. 10, 1860–1880.DOI
  22. [22]Greene, R. E.; Shiohama, K., The isometry groups of manifolds admitting nonconstant convex functions. J. Math. Soc. Japan 39 (1987), no. 1, 1–16.DOI
  23. [23]Greene, R. E.; Wu, H., C∞ approximations of convex, subharmonic, and plurisubharmonic functions. Ann. Sci. École Norm. Sup. (4) 12 (1979), no. 1, 47–84.DOI
  24. [24]Gromoll, D.; Meyer, W., On complete open manifolds of positive curvature. Ann. of Math. 90 (1969), no 2, 75–90.DOI
  25. [25]Hamilton, R. S., Three-manifolds with positive Ricci curvature. J. Differential Geometry 17 (1982), no. 2, 255–306.DOI
  26. [26]Hamilton, R. S., The formation of singularities in the Ricci flow. International Press, Cambridge, MA (1995), 7–136.
  27. [27]Hochard, R., Short-time existence of the Ricci flow on complete, non-collapsed 3-manifolds with Ricci curvature bounded from below, arXiv:1603.08726
  28. [28]Koch, H.; Lamm, T., Geometric flows with rough initial data. Asian J. Math. 16 (2012), no. 2, 209–235.arxiv.org/abs/0902.1488
  29. [29]Kotschwar, B., An energy approach to the problem of uniqueness for the Ricci flow. Comm. Anal. Geom. 22 (2014), no. 1, 149–176.arxiv.org/abs/1206.3225
  30. [30]Lai, Y., Ricci flow under local almost non-negative curvature conditions. Adv. Math. 343 (2019), 353–392arxiv.org/abs/1804.08073
  31. [31]Lamm, T.; Simon, M., Ricci flow of W^{2,2}-metrics in four dimensions. Comment. Math. Helv. 98 (2023), no. 2, 261–364.arxiv.org/abs/2109.08541
  32. [32]Lebedeva, N.; Matveev, V.; Petrunin, A.; Shevchishin, V., Smoothing 3-dimensional polyhedral spaces. Electron. Res. Announc. Math. Sci. 22 (2015), 12–19.DOI
  33. [33]Lee, M.-C., Uniqueness of Ricci flow with scaling invariant estimates, arXiv:2503.20292.
  34. [34]Lee,M.-C.; Liu, S. S. Y., The Ricci-DeTurck flow from an initial metric with a Morrey-type integrability condition. Pacific J. Math. 340 (2026), no. 2, 375–397.DOI
  35. [35]Lee, M.-C.; Tam, L.-F., Kähler manifolds with almost nonnegative curvature. Geom. Topol. 25 (2021), no. 4, 1979–2015.DOI
  36. [36]Lee, M.-C.; Tam, L.-F., Some local maximum principles along Ricci flows. Canad. J. Math. 74 (2022), no. 2, 329–348.
  37. [37]Li, P.; Yau, S.-T., On the parabolic kernel of the Schrödinger operator. Acta Math., 156 (1986), no. 3-4, 153–201.DOI
  38. [38]Nash, J., The imbedding problem for Riemannian manifolds. Ann. of Math. (2) 63 (1956), 20–63.DOI
  39. [39]Richard, T. Canonical smoothing of compact Alexandrov surfaces via Ricci flow. Ann. Sci. Éc. Norm. Supér. (4) 51 (2018), no. 2, 263–279.
  40. [40]Simon, M., Deformation of C⁰ Riemannian metrics in the direction of their Ricci curvature. Comm. Anal. Geom. 10 (2002), no. 5, 1033–1074.DOI
  41. [41]Simon, M.; Topping, P. M., Local mollification of Riemannian metrics using Ricci flow, and Ricci limit spaces. Geom. Topol. 25 (2021), no. 2, 913–948.DOI
  42. [42]Simon, M.; Topping, P. M., Local control on the geometry in 3D Ricci flow, J. Differential Geom. 122 (2022), no. 3, 467–518.arxiv.org/abs/1611.06137
  43. [43]Topping, P. M., Ricci flow and PIC. In: Surveys in differential geometry 2022. Essays on geometric flows—celebrating 40 years of Ricci flow. Vol. 27. 2024, pp. 189–211.
  44. [44]Topping, P. M., Yin, H., Uniqueness of Ricci flows from non-atomic Radon measures on Riemann surfaces. Proc. Lond. Math. Soc. (3) 128 (2024), no. 6, Paper No. e126000, 34 pp.DOI
  45. [45]Wu, H., An elementary method in the study of nonnegative curvature. Acta Math. 142 (1979), no. 1-2, 57–78.DOI
  46. [46]Yin, H., Ricci flow on surfaces with conical singularities. J. Geom. Anal. 20 (2010), no. 4, 970–995.arxiv.org/abs/0901.2387

Paper details

vlnc:W_z9qrx2zd
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Mathematics

an LLM

View statement
Looking for related papers…
Contents