WorksPhysics and Astronomy
Exact Splitting of Amplitudes and One-Loop Integrands: A Classical Origin of Zeros
Abstract
We introduce a recursion based on hidden zeros that reconstructs complete tree level scattering amplitudes and one-loop integrands at generic kinematics. The recursion takes a universal exact-splitting form: both tree amplitudes and one-loop surface integrands are expressed as sums of products of complete tree functions, with the chosen zero conditions manifest in every term. We establish this structure for cubic scalar theory, the nonlinear sigma model, and inverse string Kawai–Lewellen–Tye (KLT) functions. We derive the tree splitting formula from the equations of motion, showing that hidden zeros arise when the product of two currents solves the equations of motion, while corrections away from the zero reconstruct the full amplitude. We further show that inverse KLT is the unique extension of with higher-point non-derivative interactions that preserves hidden zeros.
Introduction
At a scattering pole, an intermediate particle goes on shell and the residue factorizes into lower amplitudes. Hidden zeros reveal structure away from poles: the complete amplitude vanishes on special kinematic loci through nontrivial cancellations between finite Feynman diagrams [1], occurring in a wide range of theories [2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14]. They have been related to enhanced scaling under complex momentum shifts and used to reconstruct amplitudes without assuming locality or unitarity [15, 16, 17]. This adds to a broader program in which amplitudes are uniquely determined by principles other than unitarity, with unitarity emerging as a consequence [18, 19, 20, 21, 22, 23]. These results suggest that hidden zeros may serve as fundamental organizing principles for quantum field theory.
Previous work has established near-zero, smooth, splitting relations, in which amplitudes reduce to products of lower amplitudes or currents on restricted kinematic loci [24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39]. A key precedent for the present work is the higher-order splitting construction of Ref. [40], which proposed an identity valid at generic kinematics, manifesting the skinny hidden zero.
In this work, we promote hidden zeros into a new recursive construction of scattering amplitudes at generic kinematics, generalizing the above mentioned results. Rather than merely constraining amplitudes on special loci, the zeros organize the complete amplitude even when all their defining conditions are relaxed. Remarkably, the recursion takes a universal exact-splitting form, schematically,
where the prefactors are precisely the tree or one-loop zero conditions (or their trigonometric generalizations), while the remaining factors are complete tree functions or amplitudes. Their sum reconstructs the full amplitude, with every term vanishing separately on the chosen zero locus.
For cubic scalars, pions, and cosmological wavefunction coefficients the tree-level exact splitting formula were already presented in Ref. [41], where they were used to generate new types of zero conditions. Here we extend the construction to the inverse string Kawai–Lewellen–Tye (KLT) functions, uncover their classical origin, and extend the recursion to one-loop surface integrands in all three theories. The resulting framework unifies previously known restricted splitting relations and also naturally reproduces the pion leading and subleading soft theorems.
We also propose a physical interpretation of hidden zeros and exact splitting, motivated by dual shuffle factorization, which separates diagrams along a zero line rather than across an on-shell propagator [14] (see also [34]). Surprisingly, on the hidden-zero locus, the product of two currents satisfies the classical equation of motion. Away from this locus, the product generates a source proportional to the zero conditions . The response to this source is given by the third current , reconstructing the full amplitude through the exact splitting formula.
Finally, we remark that the appearance of inverse KLT in this construction is not accidental. Within matrix-scalar theories with an arbitrary analytic kinetic function and non-derivative interactions, hidden zeros uniquely select the one-parameter inverse KLT tree family, whose undeformed limit is theory. Crucially, the zeros determine not only the contact interactions but also the trigonometric momentum dependence of the propagator itself.1
Cubic scalars
Exact splitting
The ordered cubic theory provides the basic example of the splitting formula. The ordered tree amplitude sums all planar cubic diagrams, or equivalently all triangulations of the -point polygon. Each internal diagonal carries a propagator , where
All momenta are outgoing and massless, with . At four points,
The sum of the two exchange diagrams displays the hidden zero , away from poles. Exact splitting extends this rearrangement to every multiplicity and every rectangular zero.
Fix . This choice selects the zero
The exact-splitting formula adapted to this zero is [41]
Here is a complete lower amplitude with its attaching propagator:
The three lower polygons are
Each is a complete on-shell lower-point amplitude, regarded as a function of its internal channels.
The prefactors are precisely sums of the defining zero conditions:
Each term vanishes on the chosen rectangle, while the splitting formula holds at generic kinematics. If all cells except are set to zero, only contributes and we recover the near-zero split [1],
For example, at 5-points, choose in Eq. (5). The formula reads
which expands to the five planar cubic trees. The two numerators in Eq. (10) are and so each term vanishes on the rectangle.
Origin from the equation of motion
We now derive the splitting formula from the classical equation , motivated by dual shuffle factorization, which naturally splits diagrams along a line joining and , which also defines corresponding zero conditions [14]. This suggests replacing the shuffle by a product of the two associated classical currents, . Surprisingly, this trial solution satisfies the equation of motion on the zero locus defined by legs and . We will show that the correction required by the equation of motion, away from the zero locus, instead generates precisely the exact splitting formula of Eq. (5).
Here sums the ordered trees with external legs , with . Taking leg as the root, the amplitude is obtained by removing the root propagator and taking the root on shell . For each interval containing the marked leg , write
To determine , substitute Eq. (11) into the ordered current equation . The terms that attach a branch to either factor in the trial product sum to , while the inverse propagator of the combined current contributes . Their difference is the source for the correction:
By Eq. (8), the prefactor is a sum of the -variables defining the zero.
At each cubic vertex only one sub-current contains the marked leg, so the equation for is linear. Iterating it attaches the remaining branches to each source in all planar ways. After root amputation, their sum is the outside current on , with . Since the trial product has no pole in , only the correction contributes to the amplitude:
This proves Eq. (5) at generic kinematics. On the zero locus every source vanishes, so the trial product already solves the current equation and .
The inverse string KLT kernel
The Kawai–Lewellen–Tye (KLT) relations express closed-string tree amplitudes as sums of products of ordered open-string amplitudes. Their kinematic weights form the KLT kernel, whose matrix inverse is described by scalar functions with two cyclic orderings [44, 45]. We study matching orderings and denote the normalized function by , with and .
These functions are generated at tree level by
where is a Catalan number. An internal line contributes , and an ordered -point vertex contributes [44, 46]. The limit restores the ordinary kinetic term and removes all higher contacts.
Exact splitting
At four points, summing the two exchange diagrams gives
The numerator vanishes at , with . The case recovers the familiar field-theory zero, while nonzero gives additional zeros at finite .
For each , the inverse KLT amplitude obeys the following trigonometric counterpart of Eq. (5):
The lower polygons are those of Eq. (7). For , define the attached functions
Each is the complete lower-point amplitude generated by Eq. (14), including all exchange and contact contributions, with internal channels inherited from the parent polygon. The attaching factors involve inverse sines, while propagators within the lower amplitudes retain their cotangent form.
The prefactor makes the zero condition explicit:
By Eq. (8), the argument of each sine is times a sum of -variables in the selected rectangle. Thus imposing throughout the rectangle makes every term vanish [46, 47]. Eq. (16) holds at generic kinematics, with all zero conditions relaxed, and reduces term by term to the cubic splitting formula as .
Derivation from the equation of motion. To derive Eq. (16), we use an equivalent field variable whose classical equation is [45]
where . Appendix B 2 gives the derivation and the field redefinition relating this equation to the Lagrangian in Eq. (14).
The nonlinear sigma model
Exact splitting
The NLSM describes massless Goldstone pions with derivative interactions. Pure pion amplitudes vanish at odd multiplicity.
In the normalization , the ordered tree exact splitting identity is also given by the same expression in Eq. (5) [41]
with given by Eq. (8). The lower functions are
The complete mixed amplitude has three biadjoint scalars at , in that second color-trace order, and pions elsewhere [48, 49]. We take .
The pion amplitude was remarkably shown to follow from the cubic scalar amplitude through the -shift relation [50],
where and denote even and odd labels, respectively, and mixed-parity channels are unchanged. The same relation can be used to derive Eq. (20) from Eq. (5).
The pion splitting formula Eq. (20) also follows from the classical field equation
where the composite field collects the pion derivative interactions. Appendix A shows examples, while Appendix B3 proves the required projection, and also directly derives it from the equation of motion.
Eq. (20) advances the exact-factorization program of Ref. [30] by providing an explicit identity for the full pion tree amplitude at arbitrary multiplicity and generic kinematics.
Soft limits
The exact splitting formula in Eq. (20) directly yields both the single- and double-soft theorems for pions. In the single-soft limit, the zero prefactors make the Adler zero manifest, while the current sums combine into the mixed amplitudes of the subleading theorem [48]. Schematically,
More details are given in Appendix F. In the adjacent double-soft limit, only two terms survive, and one can show they reduce to the hard pion amplitude times a soft factor, giving the leading double-soft theorem.
One-loop surface integrands
In this section we extend the splitting formulas to one-loop surface integrands. In this case, we find that exact splitting expresses the loop integrand in terms of trees.
Cubic scalars
For cubic scalars, a one-loop surface integrand is a sum over triangulations of a polygon with one puncture , each dual to a planar one-loop Feynman diagram [16, 36]. Each internal curve represents a propagator, and the weight of a triangulation is the product of these propagators. A curve joining boundary vertices and carries . The curves associated with and pass on opposite sides of the puncture and are assigned independent variables. We also assign the puncture an auxiliary parity . A curve from vertex to the puncture carries , with the same parity used throughout each triangulation Figure 1. Summing both sectors gives

Figure 1. The three two-point triangulations in either puncture-parity sector ; summing both sectors gives Eq. (25).
The usual momentum-space integrand is obtained by first discarding the tadpole and external-bubble contributions associated with and , whose loop integrals are scaleless in dimensional regularization. We then identify the remaining curve variables with momentum invariants where is the loop momentum.
For example, at two points, summing the three triangulations in Figure 1 over gives
We find the full one-loop surface integrand admits an exact splitting into complete trees at generic kinematics. For arbitrary multiplicity,
where . The inner and outside polygons are , and . As at tree level, includes its attaching propagator, with . Examples are given in Appendix A.
As in Eq. (5), each prefactor is a sum of local zero conditions. On the loop mesh, the cells satisfy
The cells form a triangular region called a mountain [16], shown at three points in Figure 2. Setting every cell of the mountain to zero makes Eq. (26) vanish term by term. Allowing only the peak cell to be nonzero recovers the restricted one-loop split of Ref. [16].
Figure 2. A three-point mountain on the kinematic mesh [16]. Setting every shaded cell to zero gives the mountain zero for the integrand.
Tree splitting from a loop residue. The residue at , with , opens the loop into an -point
tree and takes the mountain zero to a rectangular tree zero [16]. For , the same cut is the diagonal of , and therefore splits the inner tree into two trees. Together with , these give the three factors of the tree splitting formula. Varying recovers every splitting position in Eq. (5). Conversely, agreement on all radial residues fixes the cubic integrand, since every cubic diagram contains a radial propagator. The proof is given in Appendix D.
Inverse KLT
For inverse KLT, the one-loop surface integrand is the sum of the two puncture-parity sectors, . Each sector uses the tree vertices and propagators of Eq. (14), together with the one-loop contact interactions prescribed in Ref. [46].
The exact splitting formula has the same form as in the cubic theory
with
As at tree level, each attaching channel contributes . The outside current carries the boundary attachment . At the peak, .
Away from poles, every term vanishes on the locus for all $1\le j\le i\le n. As , each attaching factor reduces to its cubic propagator and reduces to , recovering Eq. (26) term by term.
At finite , the radial cuts fix all terms containing radial propagators. To isolate the remaining terms, set for all . Then the radial propagators vanish, while the boundary channels remain arbitrary. On this locus, Eq. (28) reproduces the one-loop contact interactions of Ref. [46] with all their tree attachments (Appendix D).
The nonlinear sigma model
For even , apply the shifts in Eq. (22) to the boundary channels and shift the radial channels as
Writing for the cubic surface integrand at the shifted arguments, we obtain the pion surface integrand
The shifts preserve each mountain numerator . The cubic splitting formula Eq. (26) therefore gives
For either attached tree factor , the pion projection is
where counts the vertices of . The inherited shifts act on the complete tree and its attaching propagators. Appendix D proves Eq. (32), while Appendix E defines the projected tree factors, including their composite insertions and contact terms.
Uniqueness of inverse KLT from hidden zeros
In this section we show that the inverse string KLT theory is uniquely selected by zeros from a general class. Consider one massless matrix scalar with single-trace, momentum-independent interactions and the Lagrangian
The constants are the ordered vertex weights, and an internal line carrying channel contributes . The kinetic function is analytic near the origin, with and , so its propagator has a massless pole of unit residue, . Ordinary cubic theory has and for . At every multiplicity , we require the amplitude to vanish at regular points of every zero locus. We normalize . At four points,
Its vanishing at fixes the even part of the propagator. In particular, the function
is odd and has the expansion . Here denotes the propagator with its constant part removed.
The five-point amplitude contains five cubic exchange diagrams, and on the rectangle , vanishing requires
where . This addition law determines the remaining momentum dependence. Expanding it about , using the unit-residue pole, gives . To solve the equation, write . The equation becomes , which gives . Consequently,
The four- and five-point zeros therefore fix the momentum dependence up to and a constant propagator shift, while the higher-point zeros fix the remaining interactions. The resulting tree amplitudes is in fact independent of at fixed . Thus zeros select the one-parameter, matching-order inverse KLT tree family within the class of Lagrangians in Eq. (34). The complete interaction tower and its uniqueness are derived in Appendix C.
Outlook
We have introduced exact splitting, a recursion that reconstructs amplitudes at generic kinematics while making the chosen hidden zero manifest in every term. The classical equations of motion explain both why the zero conditions appear as prefactors, and the product of three currents. The product of two currents generates a source, and the third sums all tree attachments to it. On the zero locus, the product of two currents satisfies the equation of motion.
At one loop, exact splitting expresses surface integrands entirely in terms of trees and reproduces the tree identities on radial cuts. Whether any structure survives after the loop momentum is integrated remains open. A further question is whether the hidden zeros of Yang–Mills amplitudes admit a similar recursion.
Such recursive formulas also reveal zeros beyond the rectangular loci [41]. The same procedure can now be used to generate potentially new zeros even at one loop.
Acknowledgments YL is supported in part by a Technion fellowship. LR is supported by the National Natural Science Foundation of China General Program No. 12475070 and the Beijing Natural Science Foundation International Scientist Project No. IS24014. AI tools were used as research and coding assistants for exploratory calculations, checks, and manuscript editing. The authors are responsible for the scientific content.
References
Low-point examples
Cubic scalars
Two points at one loop. We retain independent and , as well as the tadpole channels . Since , Eq. (26) has three terms:
The last term contains and , which cancel the negative terms from the first two numerators. The result is
Thus each sector contains one bubble and two tadpoles.
Inverse KLT
Two points at one loop. The three terms in Eq. (28) are
After cancellation of the mixed-sector products, this becomes
Each sector contains the bubble, two tadpoles, and the loop-order contact fixed by the surface prescription.
Pions
Five and six points. The pure-pion five-point amplitude vanishes, . The nonzero five-point lower function in six-pion splitting instead has three biadjoint scalars at 2, 5, 6:
The constant and the two poles are its contact and exchange terms. Substituting this function and the four-pion amplitudes into Eq. (20), with , gives
The source numerators are , , and , so the selected zero is manifest in each term. Expanding the shifted fourteen cubic trees and extracting the coefficient of gives the same expression.
Two points at one loop. At , Eq. (30) sends , , , and ; are unchanged. Applying this projection to the three cubic terms in Eq. (39) gives
The first expression retains the mountain numerators.
Classical derivation of exact splitting
Cubic scalars
We first derive the current equation and then identify the contribution of each source to the amplitude. This also fixes the conventions used for the other theories. For the matrix equation , one can perturbatively solve it by expanding over the on-shell plane waves
The matrices retain the color ordering. Let denote the coefficient of ; in particular, . Acting with multiplies this coefficient by . Substituting Eq. (46) into the field equation and equating the coefficients gives:
These coefficients include the source propagator. The amplitude is .
Select external particle . The terms in Eq. (47) separate according to which factor contains :
Only one factor in each term contains the plane wave. We test and write . The two factors satisfy
Substituting the terms independent of sum, by Eq. (49), to . Subtracting its contribution from the left gives
The boundary values are . Eq. (50) determines the correction recursively from currents with fewer external legs; no nonlinear terms in occur.
To identify the third factor, follow the contribution of one proper source , with . It first enters as . Every subsequent term of Eq. (50) attaches complete tree currents except leg . Contracting the source sub-diagram by an external leg leaves the outside current on , with the source propagator kept explicit. Therefore
The second equality uses the cyclic ordering . Each outside tree occurs once: the path from its source edge to the root specifies the successive attachments. The full-interval source instead contributes directly.
The trial product has no pole. Amputating the correction therefore gives
which is Eq. (5). The unit term involves no division by . On a regular rectangular zero every source vanishes, so the unique correction with the stated boundary values is zero.
Eqs. (B1) and (B2) give the standard pertubiner construction of scalar Berends–Giele currents [51, 52]. Substituting the trial ansatz produces the source that is proportional to the rectangular-zero condition. Summing its tree attachments and amputating the root gives the three-current splitting formula Eq. (52).
Inverse KLT
Only the kinetic function and the marked interaction change. Consider the generating equation
Here , , and the ordered -point vertex is . Expanding in external legs gives the Berends–Giele currents , normalized by .
Let denote the classical solution generated by unmarked external legs and set . Expanding to first order over , the part of the full solution linear in , gives
Indeed, with , this variation is . The first two terms couple additional tree currents to either side of , while the last term couples them to both sides.
Using the Berends–Giele recursions for the two factors in the trial product, the above equation gives the source
The extra product of inverse propagators is required by the higher contacts. The three interaction terms combine through the identity . The source therefore vanishes when , namely a rectangular zero.
The equation for is again linear. Iterating the linear equation for the correction sums the remaining tree diagrams into the outside current, as in Eq. (51).
with the same ranges and unit convention as in Eq. (52).
To identify these amplitudes, put . The propagator obeys
For the complete classical solution, define . Since and ,
On the branch analytic at the vacuum,
These are exactly the propagator and vertices of Eq. (14). Both formulations have the same nonlinear source , so their amputated multi-particle currents agree. The resulting lower functions are therefore , including at inherited channel values.
Finally, the source coefficient is
The cancellation of three phases follow from the second equality of Eq. (57). This gives Eq. (16) with the complete lower functions of Eq. (17). For the source , it contains all external legs except the root . After the root propagator is amputated, there is no outside tree remains so that an identity outside factor is given. The complete coupling tower and its uniqueness are derived in Appendix C.
Pions
The pion derivation uses the same product and source as the cubic theory, but the equation of motion must be accompanied by a nonlinear constraint. We use and the normalization . In the minimal parametrization [53],
The square root denotes the branch analytic at . Introduce the auxiliary matrices
The constraint and the pion field equation become , . For example, varying gives and , which imply the equation above. All matrices retain the block form in Eq. (62).
Let and be the ordered coefficients on the external legs labeling , with . Writing , select the component of :
Expansion of the two pion field equations gives
Thus an even number of pion legs is determined algebraically through the above equations, while those with an odd number contain a pion propagator. In particular, the coefficient of the composite field and the amputated pion current depend only on the lower-point currents. For odd , putting the root on shell gives the complete pion amplitude. The coefficient , non-zero for even , will be identified below with the mixed amplitude.
For even , select the external pion and denote its linear coefficient by . In the following equations is the classical solution generated by the remaining external legs. Linearization gives
We use the product proposed in the cubic derivation and define the source matrix through its selected coefficients:
The common marked external leg is counted once. Applying Eqs. (64) and (65) to the two factors verifies both the constraint and the mismatch:
The derivation of the second equality is similar as for cubic theory; their remaining sums are Eq. (64). The cancellation uses . Consequently the correction obeys
The correction vanishes when is the first or last external leg. With these boundary conditions, the linearized recursions Eqs. (64)–(65) determine each correction from currents with fewer external legs.
To identify the outside factor and source, introduce a fixed external source coupled to the pion and composite fields,
Here includes both matrix traces, and has the block form of , so the source coupling is . Diagrammatically, it sums all trees with one source insertion. A pion insertion generates the complete pion current, including its root propagator. While the insertion of generates a composite operator form factor without that propagator. After amputating leg , the remaining diagrams give the outside current on on . introduces the phase cancellation from the source and the outside currents. Since the product has no pole in ,
Every source vanishes on the corresponding rectangular zero, away from poles.
The composite coefficient is the mixed amplitude of Eq. (21). To see this, use Cayley coordinates, where . In the Cayley-current representation of the single soft theorem, the contribution associated with requires the last coupled current to be the single external leg . Removing that unit current leaves precisely the tree expansion of . Thus, in our normalization and second-trace ordering,
This identifies and reproduce Eq. (20) from Eq. (71).
Fixing the complete interaction tower
Within the class of theories in Eq. (34), the four- and five-point zeros fix the propagator, and one rectangular zero at each higher multiplicity fixes the remaining contact vertex.
Write and , with . The four-point zero gives , so is odd. At five points, substituting cancels all terms linear in and leaves the five cubic diagrams built from , together with the constant . On the zero , take and . Then and , and oddness reduces the zero condition to
Expanding at gives . The unit-residue pole fixes the solution,
with at .
For fixed , uniqueness at higher points follows immediately. At the first valence where two candidate theories differ, all exchange diagrams agree. Their amplitudes therefore differ only by the constant . Evaluating at any regular point of a common rectangular zero gives .
To construct the tower, write . For , Appendix B 2 gives a solution with all rectangular zeros whose interaction satisfies . For general , set . This turns the field equation into . The shift has no root propagator, so it drops out upon amputation. The same tree amplitudes are therefore generated by
Equating powers of fixes every coupling from :
Only affects the tree amplitudes. In the convention , Eq. (76) gives the Catalan couplings and , recovering Eq. (14) for . The choice instead gives , the form used in Appendix B 2.
Proof of one-loop exact splitting
Cubic scalars. We prove Eq. (26) by matching its radial residues at independent surface kinematics. Cutting opens the punctured disk into the polygon
where are the two copies of and is the opened puncture. The residue of the integrand is therefore .
For , the cut appears in two places on the right of Eq. (26). If , it splits the inner tree along the diagonal . The two resulting trees carry the attachments and . Together with the outside current, they give precisely the tree splitting formula Eq. (5) on a polygon . This is with the channels , , assigned in place of . Here denotes the copy .
If , the pole lies in the explicit attachment . These terms restore the original channels. Writing and , their sum is
To see this, restore the chords in order of increasing . Only trees containing the changed chord contribute to each difference. Cutting that chord gives the two trees displayed above. The full residue is thus .
For , the peak supplies and restoration starts at , since is a boundary edge. Reflection gives the cuts. Both sides of Eq. (26) are linear in each radial propagator separately and vanish when all radial propagators are set to zero. Hence their residues fix the full cubic integrand.
Inverse KLT. The radial cuts follow by the same argument, using inverse-KLT tree splitting for the cut inside . To see that the endpoint terms again restore the channels, write . Away from the peak, the sine addition formula gives the coefficient of the two amputated trees as
Thus Eq. (77) carries over with replaced by and by . Only the terms independent of all radial propagators remain to be matched.
Set for every , keeping the boundary channels arbitrary. The radial propagators and the peak term vanish, and . Fix a loop contact with ordered tree branches. The inner vertex takes consecutive branches and has weight . The outside vertex takes the remaining branches and has weight . The branch containing the boundary edge must lie outside, leaving placements for the inner group. Including , the total weight is
The first equality follows by pairing with and using the Catalan recursion. This is twice the contact weight of Ref. [46], as required by the two parity sectors. Odd valence gives no contribution. Since the attached trees were arbitrary, this proves Eq. (28) including all contacts.
Pions. The parity shift preserves . The attached tree factors scale as and , respectively, by Appendix E. Since , multiplying the cubic identity by and taking the limit gives Eq. (32) term by term.
The lower trees in pion loop splitting
The lower factors in Eq. (32) are complete trees. Their inherited parity assignments need not alternate, so ordinary pion amplitudes alone do not specify them. We first define these trees and then show that only their leading large- coefficients enter the loop identity.
Shifted trees and their insertions
For , retain the parent signs and shift each internal channel by
Boundary edges of the lower polygon are not propagators and are excluded from this assignment. Let denotes the degree that count its neighboring external legs and the propagators with equal-sign vertices. The complete cubic tree obeys
For a polygon containing both signs, define
The similarly scaled coefficient of an all-equal-sign polygon vanishes. Two-vertex units are defined separately and are not tree amplitudes.
To prove Eq. (81), consider the coefficient of . Each coefficient has poles only for unshifted propagators joining opposite sign vertices and has degree in . On each such pole, tree factorization gives and . Induction in multiplicity therefore shows that every residue vanishes for . Any remaining contribution must be a local contact term. For , its negative momentum degree excludes such a term. For , only a possible constant at remains. Cyclic symmetry reverses the alternating signs and sends , while this is excluded since is even. Together with , this proves Eq. (81).
For , is the ordinary pion amplitude. An external leg between equal-sign vertices instead carries an insertion of the composite field defined in Appendix B 3. Use the same conventions of that appendix, the shifted cubic equation gives
At leading order these reduce to the pion constraint and field equation already derived in Appendix B 3. For a single composite insertion, choose its external leg as the root. With external pions, the corresponding current is times the coefficient of . Amputation multiplies this by , canceling the sign and give the scaling required by Eq. (82). Thus the projected tree is the complete insertion, whose identification with the mixed amplitude was established in Appendix B 3.
The trees with two composite insertions can be generated by adding a scalar probe to the pion theory,
Take the coefficient of in the connected tree amplitude with two external legs. No internal propagator occurs at this order. The result includes all pion-exchange diagrams and the contact vertices generated by . By mathematical induction, its factorization residues agree with those of Eq. (82). Their difference therefore has no poles. Since both functions scale as inverse momentum squared for , this difference cannot be a local contact term and must vanish. For example,
The insertion positions determine the allowed poles. These functions are not arbitrary amplitudes with four biadjoint scalars. Alternatively, Eq. (82), evaluated after summing the complete cubic tree, is a terminating definition that requires no auxiliary fields.
Projection of each mountain term
Set , , and . The inner and outside polygons are and . Their equal-sign edge counts are
The mountain numerator is unchanged:
A propagator with equal-sign endpoints contributes one power of ; its scaled limit is the common endpoint sign. An opposite-sign propagator is unchanged. The two radial attachments therefore supply powers and the outside attachment supplies . Since , Eq. (81) gives
Thus each summand starts at order or later. Multiplying Eq. (26) by and taking the limit produces one product of leading coefficients per summand, with no contributions from subleading coefficients.
Away from the peak , the projected factors in Eq. (32) are
The peak is treated separately: , and its inner polygon is alternating. Only the inner tree can have two insertions; the outside tree has at most one.
This proves Eq. (32) for the shifted surface representative, retaining its tadpole and bubble terms. The result concerns the integrand before integration. The auxiliary tree prescription does not impose a choice of subtractions for a conventional loop amplitude.
Pion soft limits from exact splitting
We derive the Adler zero and its first nonzero coefficient. We use the normalization and take smooth on-shell, momentum-conserving soft limits at generic hard kinematics. Hard momenta in the leading coefficients below are evaluated at zero soft momentum.
The limit follows from splitting. Since , Eq. (20) becomes
Set . Every numerator in Eq. (90) is . The lower factors are finite: every pion propagator carries a proper odd interval of hard waves with generically nonzero invariant. The closing channel tends to zero, but is a composite current with no root propagator. Thus the Adler zero holds term by term. Interchanging the two finite sums also determines the first nonzero coefficient:
The inner sum is a complete mixed amplitude, with the second trace ordered as :
To verify this identity, use the minimal fields and Cayley currents mentioned in Appendix B.3. At , the product on the left is for even and for odd . The fields obey
Fix a partition into nonempty odd-length blocks, and let . A cut after block contributes . The condition permits precisely , and
Consequently the sum retains exactly the partitions in which belongs to an even block, with weight (-1)^{r-1}. These are the Cayley vertex weights for a three-scalar junction, with scalar branches containing $2,i,n and cubic seed [49]. Each branch equals : every vertex with two scalars has the corresponding pion vertex rule, so replacing its scalar path by pions preserves the current. A tree with three external scalars has exactly one such junction. This proves Eq. (92), including contact terms. Substitution gives the subleading single-soft theorem [48]:
References
- [1]N. Arkani-Hamed, Q. Cao, J. Dong, C. Figueiredo, and S. He, Hidden zeros for particle/string amplitudes and the unity of colored scalars, pions and gluons, JHEP 2024 (10), 231, arXiv:2312.16282 [hep-th].
- [2]C. Bartsch, T. V. Brown, K. Kampf, U. Oktem, S. Paranjape, and J. Trnka, Hidden amplitude zeros from the double-copy map, Phys. Rev. D 111, 045019 (2025), arXiv:2403.10594 [hep-th].arxiv.org/abs/2403.10594
- [3]Y. Li, D. Roest, and T. ter Veldhuis, Hidden zeros in exceptional field theories from double copy, JHEP 2025 (04), 121, arXiv:2403.12939 [hep-th].arxiv.org/abs/2403.12939
- [4]H. Huang, Y. Yang, and K. Zhou, Note on hidden zeros and expansions of tree-level amplitudes, Eur. Phys. J. C 85, 685 (2025), arXiv:2502.07173 [hep-th].arxiv.org/abs/2502.07173
- [5]Y.-C. Chang, H.-Y. Chen, and Y.-t. Huang, All zeros of (super)String Theory (2025), arXiv:2506.15299 [hep-th].arxiv.org/abs/2506.15299
- [6]N. Arkani-Hamed, C. Figueiredo, and G. N. Remmen, Open string amplitudes: singularities, asymptotics and new representations, JHEP 2025 (04), 039, arXiv:2412.20639 [hep-th].
- [7]S. He, Y. Zhang, F. Zhu, and P. Zhu, String Amplitudes on Integer Rectangles (2026), arXiv:2610.31197 [hep-th].arxiv.org/abs/2610.31197
- [8]K. Zhou, Hidden zeros for higher-derivative YM and GR amplitudes at tree-level, JHEP 2026 (02), 039, arXiv:2510.11070 [hep-th].arxiv.org/abs/2510.11070
- [9]M. Carrillo González and F. Ward, Hidden zeros in massive field theories, Phys. Rev. D 113, 125018 (2026), arXiv:2601.16860 [hep-th].arxiv.org/abs/2601.16860
- [10]Y. Zhang and P. Zhu, Fermionic hidden zeros (2026), arXiv:2609.06552 [hep-th].arxiv.org/abs/2609.06552
- [11]Q. Cao, Form Factors from String Amplitudes, Phys. Rev. Lett. 135, 021603 (2025), arXiv:2504.15702 [hep-th].DOI
- [12]L. Zhang, 2-split of form factors via BCFW recursion relation, JHEP 2026 (01), 103, arXiv:2509.12564 [hep-th].arxiv.org/abs/2509.12564
- [13]S. De, S. Paranjape, A. Pokraka, M. Spradlin, and A. Volovich, Hidden zeros of the cosmological wavefunction, JHEP 2025 (07), 174, arXiv:2503.23579 [hep-th].arxiv.org/abs/2503.23579
- [14]Y. Li and L. Rodina, Cosmological Wavefunctions as Amplitudes: Dual Shuffle Factorization and Uniqueness from New Hidden Zeros (2026), arXiv:2604.01133 [hep-th].arxiv.org/abs/2604.01133
- [15]L. Rodina, Hidden Zeros Are Equivalent to Enhanced Ultraviolet Scaling, and Lead to Unique Amplitudes in Tr(φ³) Theory, Phys. Rev. Lett. 134, 031601 (2025), arXiv:2406.04234 [hep-th].DOI
- [16]J. V. Backus and L. Rodina, Emergence of Unitarity and Locality from Hidden Zeros at One-Loop Order, Phys. Rev. Lett. 135, 131601 (2025), arXiv:2503.03805 [hep-th].DOI
- [17]L. Rodina, G. Sellaroli, and Y. Ni, A Combinatorial Origin of Locality (2026), arXiv:2608.23008 [hep-th].arxiv.org/abs/2608.23008
- [18]N. Arkani-Hamed, L. Rodina, and J. Trnka, Locality and Unitarity of Scattering Amplitudes from Singularities and Gauge Invariance, Phys. Rev. Lett. 120, 231602 (2018), arXiv:1612.02797 [hep-th].
- [19]L. Rodina, Uniqueness from gauge invariance and the Adler zero, JHEP 2019 (09), 084, arXiv:1612.06342 [hep- th].DOI
- [20]L. Rodina, Uniqueness from locality and BCFW shifts, JHEP 2019 (09), 078, arXiv:1612.03885 [hep-th].DOI
- [21]L. Rodina, Scattering Amplitudes from Soft Theorems and Infrared Behavior, Phys. Rev. Lett. 122, 071601 (2019), arXiv:1807.09738 [hep-th].DOI
- [22]J. J. M. Carrasco and L. Rodina, UV considerations on scattering amplitudes in a web of theories, Phys. Rev. D 100, 125007 (2019), arXiv:1908.08033 [hep-th].DOI
- [23]L. Rodina, UV consistency conditions for CHY integrands, Phys. Rev. D 102, 045012 (2020), arXiv:2005.06446 [hep-th].DOI
- [24]F. Cachazo, N. Early, and B. Giménez Umbert, Smoothly splitting amplitudes and semi-locality, JHEP 2022 (08), 252, arXiv:2112.14191 [hep-th].DOI
- [25]Q. Cao, J. Dong, S. He, and C. Shi, A universal splitting of tree-level string and particle scattering amplitudes, Phys. Lett. B 856, 138934 (2024), arXiv:2403.0855 [hep-th].DOI
- [26]Q. Cao, J. Dong, S. He, C. Shi, and F. Zhu, On universal splittings of tree-level particle and string scattering amplitudes, JHEP 2024 (09), 049, erratum: JHEP 01, 126 (2025), doi:10.1007/JHEP01(2025)126, arXiv:2406.03838 [hep-th].
- [27]A. Guevara and Y. Zhang, New factorizations of Yang-Mills amplitudes (2024), arXiv:2406.08969 [hep-th].arxiv.org/abs/2406.08969
- [28]Y. Zhang, On the new factorizations of Yang-Mills amplitudes, JHEP 2025 (02), 074, arXiv:2412.15198 [hep-th].DOI
- [29]K. Zhou, Understanding zeros and splittings of ordered tree amplitudes via Feynman diagrams, JHEP 2025 (03), 154, arXiv:2411.07944 [hep-th].arxiv.org/abs/2411.07944
- [30]Y. Li, T. Wang, T. Brauner, and D. Roest, Diagrammatic Derivation of Hidden Zeros and Exact Factorization of Pion Scattering Amplitudes, Phys. Rev. Lett. 135, 181601 (2025), arXiv:2412.14858 [hep-th].arxiv.org/abs/2412.14858
- [31]B. Feng, L. Zhang, and K. Zhou, Hidden zeros and 2-split via BCFW recursion relation, JHEP 2025 (08), 205, arXiv:2504.14215 [hep-th].arxiv.org/abs/2504.14215
- [32]B. Feng, L. Zhang, and K. Zhou, 2-split from Feynman diagrams and expansions, JHEP 2026 (02), 204, arXiv:2508.21345 [hep-th].arxiv.org/abs/2508.21345
- [33]T. Azevedo, H. Gomez, and R. Lipinski Jusinskas, On-shell representation and further instances of the 2-split behavior of amplitudes, JHEP 2026 (06), 001, arXiv:2512.20790 [hep-th].DOI
- [34]K. Zhou, Universal interpretation of hidden zero and 2-split of tree-level amplitudes using Feynman diagrams. Part I. Tr(φ³), NLSM and YM, JHEP 2026 (09), 112, arXiv:2604.23680 [hep-th].arxiv.org/abs/2604.23680
- [35]L. Zhang and K. Zhou, Generalized 2-split for higher-derivative YM and GR amplitudes at tree-level, JHEP 2026 (06), 105, arXiv:2601.00297 [hep-th].arxiv.org/abs/2601.00297
- [36]N. Arkani-Hamed and C. Figueiredo, All-order splits and multi-soft limits for particle and string amplitudes, JHEP 2025 (10), 077, arXiv:2405.09608 [hep-th].
- [37]K. Zhou, Towards New Hidden Zero and 2-Split of Loop-Level Feynman Integrands in Tr(φ³) Model, JHEP 2026 (10), 030, arXiv:2604.13810 [hep-th].arxiv.org/abs/2604.13810
- [38]B. Giménez Umbert and B. Sturmfels, Splitting CEGM amplitudes, JHEP 2025 (04), 076, arXiv:2501.10805 [hep-th].arxiv.org/abs/2501.10805
- [39]N. Early, The CEGM NLSM, JHEP 2025 (04), 030, arXiv:2502.08016 [hep-th].arxiv.org/abs/2502.08016
- [40]C. R. T. Jones and S. Paranjape, Smooth splitting and zeros from on-shell recursion, JHEP 2025 (07), 251, arXiv:2505.02520 [hep-th].arxiv.org/abs/2505.02520
- [41]Y. Li and L. Rodina, From Hidden Zeros to Exact Split-tings and New Zeros (2026), arXiv:2610.01775 [hep-th].arxiv.org/abs/2610.01775
- [42]H.-H. Chi, H. Elvang, A. Herderschee, C. R. T. Jones, and S. Paranjape, Generalizations of the double-copy: the KLT bootstrap, JHEP 03, 077, arXiv:2106.12600 [hep-th].
- [43]A. S.-K. Chen, H. Elvang, and A. Herderschee, Boot-strapping the string Kawai-Lewellen-Tye kernel, Phys. Rev. Lett. 131, 031602 (2023), arXiv:2302.04895 [hep-th].
- [44]S. Mizera, Inverse of the String Theory KLT Kernel, JHEP 2017 (06), 084, arXiv:1610.04230 [hep-th].DOI
- [45]S. Mizera, Combinatorics and Topology of Kawai–Lewellen–Tye Relations, JHEP 2017 (08), 097, arXiv:1706.08527 [hep-th].DOI
- [46]C. Bartsch, K. Kampf, J. Novotný, and J. Trnka, A surface integrand for the inverse KLT kernel, JHEP 2026 (10), 099, arXiv:2602.15102 [hep-th].arxiv.org/abs/2602.15102
- [47]C. Bartsch, K. Kampf, J. Novotný, and J. Trnka, Universality of colored scalars from the stringy Kawai–Lewellen–Tye kernel, Phys. Rev. D 112, 085002 (2025), arXiv:2505.01501 [hep-th].arxiv.org/abs/2505.01501
- [48]F. Cachazo, P. Cha, and S. Mizera, Extensions of Theories from Soft Limits, JHEP 2016 (06), 170, arXiv:1604.03893 [hep-th].DOI
- [49]I. Low and Z. Yin, The Infrared Structure of Nambu-Goldstone Bosons, JHEP 10, 078, arXiv:1804.08629 [hep-th].DOI
- [50]N. Arkani-Hamed, Q. Cao, J. Dong, C. Figueiredo, and S. He, Nonlinear Sigma model Amplitudes to all loop orders are contained in the Tr(Φ³) theory, Phys. Rev. D 110, 065018 (2024), arXiv:2401.05483 [hep-th].
- [51]F. A. Berends and W. T. Giele, Recursive Calculations for Processes with n Gluons, Nucl. Phys. B 306, 759 (1988).DOI
- [52]S. Mizera and B. Skrzypek, Perturbiner methods for effective field theories and the double copy, JHEP 10, 018, arXiv:1809.02096 [hep-th].DOI
- [53]K. Kampf, J. Novotný, and J. Trnka, Tree-level amplitudes in the nonlinear sigma model, JHEP 05, 032, arXiv:1304.3048 [hep-th].DOI
