betaFeedback

WorksPhysics and Astronomy

First-Principles Investigation of Sr2PrSbO6 Double Perovskite: An Emerging Aspirant for Electrocatalysis, Plasmonic, Photonics, Thermoelectric and Solar Cell Applications

Abstract

In this study, we investigate the structural properties, chemical stability, and electronic, optical, and thermoelectric properties of Sr2PrSbO6\mathrm{Sr_2PrSbO_6} using first-principles calculations based on Density Functional Theory (DFT). The goal of this study is to evaluate its potential contribution to next-generation electrocatalysts, optoelectronic devices, and thermoelectric systems. The structural optimization reveals that Sr2PrSbO6\mathrm{Sr_2PrSbO_6} crystallizes in a stable cubic perovskite structure with space group Fm3ˉmFm\bar{3}m. The calculated formation energy indicates high thermodynamic stability, confirming the viability of Sr2PrSbO6\mathrm{Sr_2PrSbO_6} for practical applications. The electronic band structure calculations show that Sr2PrSbO6\mathrm{Sr_2PrSbO_6} is a wide bandgap semiconductor with a direct bandgap of 3.488 eV3.488~\mathrm{eV} at the ΓΓ-point. The calculated density of states (DOS) indicates significant contributions from O 2p2p, Sb 5p5p, and Pr 5d5d orbitals. Optical property calculations, including the dielectric function and absorption coefficient, reveal strong absorption in the UV regions, making Sr2PrSbO6\mathrm{Sr_2PrSbO_6} a promising candidate for optoelectronic applications such as UV light-emitting diodes (LEDs) and photovoltaic-thermoelectric (PV-TE) tandem systems. At room temperature, the calculated dimensionless quantity ZTZT is 0.330.33, which indicates this material as a possible candidate for thermoelectric applications. Our results will serve as a benchmark for future experimental and theoretical research on the properties of this material.

Introduction

The increasing global demand for energy, in conjunction with the increasing apprehensions regarding the greenhouse effect and environmental pollution resulting from fossil fuel production, has prompted extensive research into the development of new electrochemical storage systems and renewable energy solutions. [1–10] It is only recently that the creation of new functional materials, with unique functionality relevant to the described issues and invested to mitigate them, received intensive effort. Despite the progress, materials with unique and tailored properties are still essential for energy conversion processes, which vary across technologies. Quite impressively, the oxide perovskites and their derivatives [11, 12, 13, 14, 15, 16] are implemented within a range of technologies and shown to be versatile. Additionally, the structural and compositional flexibility of oxide perovskites provides properties like superconductivity, ferroelectricity, magnetoresistance, and ionic conductivity [17, 18].

In double perovskites, either the A-site or B-site is occupied by two different cations, leading to a general formula of the structure A′A′′B2O6A^\prime A^{\prime\prime}\mathrm{B}_2\mathrm{O}_6 (double A-site) or A2B′B′′O6\mathrm{A}_2\mathrm{B}^\prime\mathrm{B}^{\prime\prime}\mathrm{O}_6 (double B-site). Normally, A-site cations donate electrons to the [BO6][\mathrm{BO}_6] lattice, and B-site cations are the major contributors to the physical properties. Hence, double perovskites are named for the double B-site occupancy. These three-dimensional crystal structures are known for exhibiting the typical checkerboard geometry, in which the ’A’ letters present rare-earth or large alkaline-earth elements; the ’B’ and ’B′’ present transition metal cations or lanthanides that showed multiferroic behavior in oxide systems and have garnered significant interest. [12, 19] The fact that the ionic radii or valence states of the B and B′ cations vary gives rise to spatial separation, which can encourage B-site ordering into a rock-salt structure, allowing room for electrostatic stability. [19] It can then maintain the interactions of all charge, spin, and lattice systems in orchestration to allow the overall behavior of the material. Francisco Fernandez Martinez and co authors have synthesised Sr2RESbO6\mathrm{Sr}_2\mathrm{RESbO}_6 (RE = la to Lu and Y) and conducted FT-Raman and FT-IR vibrational spectroscopic studies. [20]

The distinctive 4f4f electrons in rare earth elements are crucial for uncovering new properties and applications. Researchers are striving to bridge current gaps by providing insights into these materials’ composition, synthesis, and uses. [21] The double perovskites La2NiMnO6\mathrm{La}_2\mathrm{NiMnO}_6 and Gd2NiMnO6\mathrm{Gd}_2\mathrm{NiMnO}_6, containing rare earth elements offer potential applications in thermoelectric, photocatalytic, magnetocaloric, and solar energy technologies. [22] Ba2LnMO6\mathrm{Ba}_2\mathrm{LnMO}_6 double perovskites (where M = Sb, Bi, or Ln = lanthanides) were synthesized and their structures were examined in detail. [23] Dielectric relaxation measurements were also conducted on a Pr2NiZrO6\mathrm{Pr}_2\mathrm{NiZrO}_6 (PNZ) sample over a range of frequencies and temperatures spanning 313 K to 593 K. [24] Das et al. studied the electrical and magnetic properties of the rare earth double perovskite Dy2CoMnO6\mathrm{Dy}_2\mathrm{CoMnO}_6. [25] The perovskites A2FeMnO6\mathrm{A}_2\mathrm{FeMnO}_6 (with A = Ba or La) were studied using both experimental approaches and Density Functional Theory to examine their structural, electronic, magnetic, and optical features. [26] By employing both Density Functional Theory and experimental methods, the study explored the structural, electrical, and magnetic properties of RE2NiCrO6\mathrm{RE}_2\mathrm{NiCrO}_6 (RE = Ce, Pr, Nd). [27] Analyzed through DFT, the double perovskites Sr2(RE)CoO6\mathrm{Sr}_2(\mathrm{RE})\mathrm{CoO}_6 showed promise for use in thermoelectric and photovoltaic solar technologies. [28] A thorough first-principles study of Sr2ScBiO6\mathrm{Sr}_2\mathrm{ScBiO}_6 revealed its promising physical properties for low-cost energy technologies. [29] Sr2XNbO6\mathrm{Sr}_2\mathrm{XNbO}_6 (where X = La or Lu) was examined in a separate research for its potential in UV thermoelectric and optoelectronic uses, revealing direct bandgaps of 4.02 eV and 3.7 eV. [30] In a similar vein, Haid and co-authors explored Sr2CrTaO6\mathrm{Sr}_2\mathrm{CrTaO}_6, underscoring its half-metallic ferrimagnetic ground state and its applications in visible, ultraviolet, and infrared technologies. [31]

The literature on double perovskites with Pr at the B-site and Sb at the B′-site is noticeably lacking, despite the fact that oxide double perovskites have many applications. $\mathrm{Sr}_2\mathrm{PrSbO}_6ҵәа` is one such material with a perovskite structure, making it a promising candidate for these applications.To our best knowledge The cubic symmetry and high thermodynamic stability of Sr2PrSbO6\mathrm{Sr}_{2}\mathrm{PrSbO}_{6} suggest that it could be used in high-performance electronic devices [32].This gap represents a substantial opportunity to investigate these materials, as the distinctive compositional structure of Sr2PrSbO6\mathrm{Sr}_{2}\mathrm{PrSbO}_{6} double perovskites may yield remarkable electronic properties and varied potential applications. Consequently, this study seeks to examine the versatility of Sr2PrSbO6\mathrm{Sr}_{2}\mathrm{PrSbO}_{6} in advanced technologies, including solid oxide fuel cells, catalysis, optoelectronics, and thermoelectrics, utilizing Density Functional Theory (DFT).

Recent advancements in Density Functional Theory (DFT) have enabled detailed insights into the structural, electronic, and optical properties of complex oxides like Sr2PrSbO6\mathrm{Sr}_{2}\mathrm{PrSbO}_{6}. To the best of our knowledge, no previous studies have extensively reported the structural, optoelectronic, thermoelectric properties, and chemical stability of this material. Hence, by employing first-principles calculations, this study aims to provide a comprehensive understanding of Sr2PrSbO6\mathrm{Sr}_{2}\mathrm{PrSbO}_{6}, including its electronic band structure, density of states, optical properties (such as the dielectric function and absorption coefficient), and chemical stability. These properties are crucial for evaluating the material’s potential for use in devices such as UV light-emitting diodes (LEDs), photovoltaic cells, and high-power electronics. [33]

Computational Methodology

In this study, first-principles calculations based on Density Functional Theory (DFT) were utilized to examine the structural, electronic, optical properties, and chemical stability of Sr2PrSbO6\mathrm{Sr}_{2}\mathrm{PrSbO}_{6}. These calculations were carried out using the Vienna Ab initio Simulation Package (VASP) [34, 35, 36, 37, 38, 39].Augmented wavefunctions, such as Projector Augmented Wave (PAW) potentials, enhance the fidelity of density functional theory (DFT) calculations. They do so by accurately representing electron density near atomic cores and improving the modeling of electron-core interactions. [40]. The utilization of PAW potentials ensures a more accurate depiction of electronic properties while effectively considering core electron interactions. Geometrical optimizations are conducted using the Perdew-Burke-Ernzerhof (PBE) functional based on the Generalized Gradient Approximation (GGA) for exchange-correlation interactions [41, 42].The GGA-PBE functional was chosen because it is computationally efficient, and has significantly higher accuracy than the LDA functional across a variety of systems. Ions are relaxed into their lowest energy state configurations using the conjugate-gradient technique. The electron-ion interactions were treated with Projector Augmented Wave (PAW) pseudopotentials, specifically chosen from the standard VASP library to match the PBE functional for elements Sr, Pr, Sb, and O. This selection ensures a reliable representation of core-electron interactions while maintaining computational efficiency.

A plane-wave basis set with a kinetic energy cutoff of 400 eV was applied, following thorough convergence tests to validate the energy cutoff and k-point mesh for accuracy and reliability. The Brillouin zone was sampled using Monkhorst-Pack [43] grid of 3×3×33 \times3 \times3 for both structural optimization and electronic property calculations, confirmed sufficient through convergence testing. The initial structure of Sr2PrSbO6\mathrm{Sr}_{2}\mathrm{PrSbO}_{6} was sourced from the Materials Project database, and subsequent structural optimization was conducted using the Conjugate Gradient (CG) algorithm with specific convergence criteria: a total energy convergence of 1×10−81 \times10^{-8} eV/atom, a force convergence threshold of −2×10−2-2 \times10^{-2} eV/Å, and a fully relaxed stress tensor and cell shape.

Electronic band structure calculations were performed along the high-symmetry path in the Brillouin zone, specifically the Γ\Gamma-X-U|K-Γ\Gamma-L-W-X points, along with the computation of the density of states (DOS) and partial density of states (PDOS) to analyze orbital contributions. A spin-polarized DFT approach was employed for band structure, with a non-self-consistent calculation initiated from existing wavefunctions and charge densities from a prior self-consistent field (SCF) calculation. Similarly, DOS and PDOS calculations used spin-polarized DFT. The projected density of states (PDOS) was enabled for detailed orbital analysis.

Optical properties, including the dielectric function, refractive index, and absorption coefficient, were derived using Kohn-Sham orbitals from the DFT calculations. The frequency-dependent dielectric function, ε(ω)=ε1(ω)+iε2(ω)\varepsilon(\omega) = \varepsilon_{1}(\omega) + i\varepsilon_{2}(\omega), was evaluated to understand the interaction of Sr2PrSbO6\mathrm{Sr}_{2}\mathrm{Pr}\mathrm{Sb}\mathrm{O}_{6} with electromagnetic waves. Chemical stability was analyzed through formation energy calculations. The transport coefficients were determined using the semiclassical Boltzmann theory as implemented in the BoltzTraP2 code [44]. Overall, these comprehensive calculations provide valuable insights into the fundamental properties of Sr2PrSbO6\mathrm{Sr}_{2}\mathrm{Pr}\mathrm{Sb}\mathrm{O}_{6}, with a focus on accurate structural, electronic, and optical characteristics supported by thorough convergence testing and methodological rigor.

Structural Properties

Crystal Structure

Sr2PrSbO6\mathrm{Sr}_{2}\mathrm{Pr}\mathrm{Sb}\mathrm{O}_{6} crystallizes in a cubic crystal system with a space group of Fm−3m\mathit{Fm-3m} which can be observed from Figure 1. The optimized lattice parameters are a=4.267a = 4.267 Å, b=4.267b = 4.267 Å, and c=4.267c = 4.267 Å, reflecting the high degree of symmetry inherent in a cubic structure. The equivalence of the lattice parameters confirms the ideal cubic symmetry of the crystal. The unit cell consists of 2 formula units of Sr2PrSbO6\mathrm{Sr}_{2}\mathrm{Pr}\mathrm{Sb}\mathrm{O}_{6}.

Crystal structure of the compound showing the arrangement of Pr, Sb, and Sr atoms

Figure 1. Crystal structure of the compound showing the arrangement of Pr (yellow polyhedra), Sb (brown polyhedra), and Sr (green spheres) atoms. The coordination geometry is depicted with oxygen atoms (red spheres), highlighting the connectivity of the polyhedra. The unit cell directions (aa, bb, and cc) are shown in the bottom-left corner for reference.

In this structure, Sr atoms occupy the corner positions with coordinates at (0.25,0.25,0.25)(0.25, 0.25, 0.25) and (0.75,0.75,0.75)(0.75, 0.75, 0.75). Pr atoms are located at the body center with coordinates at (0.0,0.0,0.0)(0.0, 0.0, 0.0). Sb atoms occupy the face-centered positions with coordinates at (0.5,0.5,0.5)(0.5, 0.5, 0.5). O atoms are positioned at the general positions with the following coordinates: (0.7323,0.2677,0.2677)(0.7323, 0.2677, 0.2677), (0.2677,0.7323,0.7323)(0.2677, 0.7323, 0.7323), (0.2677,0.7323,0.2677)(0.2677, 0.7323, 0.2677), (0.7323,0.2677,0.7323)(0.7323, 0.2677, 0.7323), (0.2677,0.2677,0.7323)(0.2677, 0.2677, 0.7323), and (0.7323,0.7323,0.2677)(0.7323, 0.7323, 0.2677). The detailed atomic positions and corresponding Wyckoff coordinates are presented in Table 1.

AtomWyckoffxyz
Sr8c0.250.250.25
Pr4a0.00.00.0
Sb4b0.50.50.5
O24e0.73230.26770.2677
O24e0.26770.73230.7323
O24e0.26770.73230.2677
O24e0.73230.26770.7323
O24e0.26770.26770.7323
O24e0.73230.73230.2677

Table 1. Atomic positions and Wyckoff coordinates for Sr2PrSbO6\mathrm{Sr}_2\mathrm{PrSbO}_6.

Bond Lengths and Angles

The bond lengths and angles in the Sr2PrSbO6\mathrm{Sr}_2\mathrm{PrSbO}_6 structure were analyzed in detail to understand the nature of bonding and the geometry within the crystal lattice. The Sr–O bond length was measured at 3.02109 Å, indicating a weaker ionic interaction due to the larger ionic radius of Sr2+\mathrm{Sr}^{2+}. In contrast, the Pr–O and Sb–O bond lengths were found to be 2.28474 Å and 1.98238 Å, respectively, with the shorter Sb–O bond length suggesting a more covalent character due to the higher electronegativity of Sb. The bond angle analysis revealed an O–Sb–O angle of 90.0000 degrees, which is typical for a nearly perfect octahedral coordination, implying minimal distortion in the SbO6\mathrm{SbO}_6 octahedra. Additionally, the Sr–O–Pr bond angle was calculated to be 87.1316 degrees, indicating a slight deviation from an ideal linear arrangement, likely resulting from the size mismatch between Sr, Pr, and Sb atoms, leading to minor structural distortions. The result is summarized in Table 2.

Bond/AngleValue
Sr–O Bond Length3.02109 Å
Pr–O Bond Length2.28474 Å
Sb–O Bond Length1.98238 Å
O–Sb–O Angle90.0000 degrees
Sr–O–Pr Angle87.1316 degrees

Table 2. Bond lengths and angles in SrPrSbO6\mathrm{SrPrSbO}_6.

Tolerance Factor

To understand the structural stability and the formability of the perovskite crystal structures, the Goldschmidt tolerance factor [45] that compares the cation’s and anion’s ionic sizes in a crystal structure, is studied. The Sr2PrSbO6\mathrm{Sr}_2\mathrm{PrSbO}_6 stoichiometry defines the overall crystallographic structure of double-perovskite material, where AA represents Sr, BB being the lanthanide series metal cation Pr, B′B' refers to the post-transition metal cation Sb, and XX is oxygen. For Sr2PrSbO6\mathrm{Sr}_2\mathrm{PrSbO}_6, the tolerance factor (TfT_f) is defined by the ionic radii of the AA (RAR_A), BB (RBR_B), B′B' (RB′R'_{B}) and OO (ROR_O) site ions as stated in equation (1).

Tf=RA+RO2[RB+RB′2+RO](1)T_f = \frac{R_A + R_O}{\sqrt{2}\left[\frac{R_B+R'_{B}}{2}+R_O\right]} \tag*{(1)}

For an ideal cubic perovskite structure, TfT_f typically ranges between 0.8 and 1.0, with the A-cation being larger than the B-cation [46]. However, when the A-cation is smaller, TfT_f decreases below 1.0, leading to octahedral tilting to fill the space, which in turn reduces the symmetry of the crystal structure.

The calculated tolerance factor of 0.968 is within the stable range for perovskite structures (0.8 ≤t≤\le t \le 1.0), indicating that Sr2PrSbO6\mathrm{Sr}_2\mathrm{PrSbO}_6 is structurally stable and likely to maintain its perovskite phase under standard conditions. [18, 45]

Thermodynamic Stability

The thermodynamic stability of Sr2PrSbO6\mathrm{Sr}_2\mathrm{PrSbO}_6 was evaluated through the calculation of its formation energy using the equation ΔEformation=∑Eproducts−∑Ereactants\Delta E_{\mathrm{formation}} = \sum E_{\mathrm{products}} - \sum E_{\mathrm{reactants}}. [47] The formation energy for Sr2PrSbO6\mathrm{Sr}_2\mathrm{PrSbO}_6 was found to be −22.7698127-22.7698127 eV per formula unit, which corresponds to −2.27698127-2.27698127 eV per atom. This significantly negative value indicates high thermodynamic stability, confirming that Sr2PrSbO6\mathrm{Sr}_2\mathrm{PrSbO}_6 is stable and can be synthesized under appropriate conditions. The negative formation energy further affirms that Sr2PrSbO6\mathrm{Sr}_2\mathrm{Pr}\mathrm{SbO}_6 is not prone to decomposition, making it a promising candidate for various applications in the perovskite structure. [19]

Chemical Stability

The formation energy of the decomposed compound is summarized in Table 3 and Figure 2. From the analysis of the decomposition reactions of Sr2PrSbO6\mathrm{Sr}_2\mathrm{Pr}\mathrm{SbO}_6, based on the calculated formation energies per atom, the following conclusions can be made:

Formation energy per atom for various decomposition reactions of Sr2PrSbO6

Figure 2. Formation energy per atom (eV) for various decomposition reactions of Sr2PrSbO6\mathrm{Sr}_2\mathrm{Pr}\mathrm{SbO}_6, labeled by reaction number. Positive formation energy values indicate energetically unfavorable reactions, while negative values correspond to energetically favorable reactions. Reaction 7 exhibits the highest positive formation energy, indicating a strong endothermic process, whereas reactions 1 and 2 display the lowest formation energies, suggesting highly exothermic reactions.

Reaction No.Full ReactionTotal AtomsFormation Energy per Atom (eV)
12SrO+Pr2O3+Sb2O32\mathrm{SrO} + \mathrm{Pr}_{2}\mathrm{O}_{3} + \mathrm{Sb}_{2}\mathrm{O}_{3}14−1.99
22SrO+Pr2O3+2Sb2\mathrm{SrO} + \mathrm{Pr}_{2}\mathrm{O}_{3} + 2\mathrm{Sb}11−1.29
32SrO+Pr2O3+SbO22\mathrm{SrO} + \mathrm{Pr}_{2}\mathrm{O}_{3} + \mathrm{SbO}_{2}14−1.20
42SrO+Pr2O3+SbO42\mathrm{SrO} + \mathrm{Pr}_{2}\mathrm{O}_{3} + \mathrm{SbO}_{4}100.02
52SrO+PrO2+Sb2O32\mathrm{SrO} + \mathrm{PrO}_{2} + \mathrm{Sb}_{2}\mathrm{O}_{3}140.21
62SrO+PrO2+SbO22\mathrm{SrO} + \mathrm{PrO}_{2} + \mathrm{SbO}_{2}15−1.70
72Sr+Pr+Sb+3O22\mathrm{Sr} + \mathrm{Pr} + \mathrm{Sb} + 3\mathrm{O}_{2}102.28
82SrO+Pr+Sb+12O22\mathrm{SrO} + \mathrm{Pr} + \mathrm{Sb} + \frac{1}{2}\mathrm{O}_{2}120.07
92SrO+PrO3+Sb+SbO22\mathrm{SrO} + \mathrm{PrO}_{3} + \mathrm{Sb} + \mathrm{SbO}_{2}13−1.97
10Sr2O3+PrSbO4+SbO3\mathrm{Sr}_{2}\mathrm{O}_{3} + \mathrm{PrSbO}_{4} + \mathrm{SbO}_{3}15−1.30
112SrO+PrO2+SbO22\mathrm{SrO} + \mathrm{PrO}_{2} + \mathrm{SbO}_{2}14−0.98
12SrO+SrPrO4+Sb\mathrm{SrO} + \mathrm{SrPrO}_{4} + \mathrm{Sb}90.48
13SrO+SrPrO3+Sb2O3\mathrm{SrO} + \mathrm{SrPrO}_{3} + \mathrm{Sb}_{2}\mathrm{O}_{3}11−0.82

Table 3. Formation energies per atom for the decomposition reactions of Sr2PrSbO6\mathrm{Sr}_{2}\mathrm{PrSbO}_{6}.

The most stable decomposition pathway for Sr2PrSbO6\mathrm{Sr}_2\mathrm{Pr}\mathrm{SbO}_6 is represented by Reaction 1 (2SrO+Pr2O3+Sb2O32\mathrm{SrO}+\mathrm{Pr}_2\mathrm{O}_3+\mathrm{Sb}_2\mathrm{O}_3) and Reaction 9 (Sr2O3+Pr2O3+Sb2O3\mathrm{Sr}_2\mathrm{O}_3+\mathrm{Pr}_2\mathrm{O}_3+\mathrm{Sb}_2\mathrm{O}_3), having the most negative formation energies per atom of −1.99-1.99 eV and −1.97-1.97 eV, respectively. This suggests that Sr2PrSbO6\mathrm{Sr}_2\mathrm{Pr}\mathrm{SbO}_6 is most likely to decompose into SrO\mathrm{SrO}, Pr2O3\mathrm{Pr}_2\mathrm{O}_3, and Sb2O3\mathrm{Sb}_2\mathrm{O}_3, or alternatively into Sr2O3\mathrm{Sr}_2\mathrm{O}_3, Pr2O3\mathrm{Pr}_2\mathrm{O}_3, and Sb2O3\mathrm{Sb}_2\mathrm{O}_3, indicating a relative stability under standard conditions but with potential for decomposition under specific scenarios.

Reactions with positive formation energies, such as Reaction 3 (2SrO+PrSbO42\mathrm{SrO} + \mathrm{PrSbO}_{4}, 0.02 eV) and Reaction 12 (SrO+SrPrO4+Sb\mathrm{SrO} + \mathrm{SrPrO}_{4} + \mathrm{Sb}, 0.48 eV), are less favorable, indicating that these products are less likely to form spontaneously. Intermediate stability is observed in reactions like Reaction 5 (2SrO+PrO3+Sb2O52\mathrm{SrO} + \mathrm{PrO}_{3} + \mathrm{Sb}_{2}\mathrm{O}_{5}, −1.70 eV) and Reaction 10 (Sr2O3+PrSbO4+SbO3\mathrm{Sr}_{2}\mathrm{O}_{3} + \mathrm{PrSbO}_{4} + \mathrm{SbO}_{3}, −1.30 eV), suggesting partial decomposition under specific environmental conditions such as elevated temperatures.

Unstable reactions, such as Reaction 6 (2Sr+Pr+Sb+3O22\mathrm{Sr} + \mathrm{Pr} + \mathrm{Sb} + 3\mathrm{O}_{2}, 2.28 eV) and Reaction 7 (2SrO+Pr+Sb+1.5O22\mathrm{SrO} + \mathrm{Pr} + \mathrm{Sb} + 1.5\mathrm{O}_{2}, 1.77 eV), indicate that decomposition into elemental forms is highly unlikely. Overall, Sr2PrSbO6\mathrm{Sr}_{2}\mathrm{PrSbO}_{6} demonstrates considerable stability, making it suitable for high-temperature and chemically resistant applications, such as in solid oxide fuel cells, catalysis, and dielectric materials, reinforcing its potential use in demanding environments.

Electronic Properties

Band Structure

Electronic properties offer crucial insights into various material characteristics, such as the nature of bonding between anions and cations, photon absorption efficiency, electrical conductivity, and related attributes. Recently, lanthanide-based double perovskites have attracted attention for their unique direct band gap, making them a subject of significant research interest. [48, 49]Additionally, the potential of these materials as emitters of white light has been investigated in pioneering study regarding their band gap characteristics, the experimental synthesis of LD has produced favorable findings. [50].

The electronic band structure of Sr2PrSbO6\mathrm{Sr}_{2}\mathrm{PrSbO}_{6} was calculated using Density Functional Theory (DFT) along the high-symmetry paths in the Brillouin zone, specifically Γ\Gamma-X-U|K-Γ\Gamma-L-W-X. The calculated band structure is shown in Figure 3(a).As seen in the figure, Sr2PrSbO6\mathrm{Sr}_2\mathrm{PrSbO}_6 exhibits a direct bandgap of 3.488 eV, located at the Γ\Gamma-point for both spin-up and spin-down configurations. This significant bandgap suggests that Sr2PrSbO6\mathrm{Sr}_2\mathrm{PrSbO}_6 is a wide bandgap semiconductor, which makes it suitable for applications in optoelectronic devices such as ultraviolet (UV) light emitters, and potential applications in high-power electronics. [33]Additionally, its large bandgap could imply strong resistance to thermal excitation, suggesting possible applications in high-temperature electronic devices. [51]

Spin-polarized electronic band structure and density of states of Sr₂PrSbO₆

Figure 3. Spin-polarized electronic properties of Sr2PrSbO6\mathrm{Sr}_2\mathrm{PrSbO}_6 determined using GGA calculations: (a) Electronic band structure along high-symmetry points in the Brillouin zone, with the Fermi level set to zero; (b) Total and partial density of states (DOS and PDOS), showing contributions from Sr, Pr, Sb, and O atoms. The inset highlights the contributions from individual atomic orbitals.

Density of States

The total and partial density of states (TDOS and PDOS) are shown in Figure 3(b). The TDOS also confirms that the band gap is 3.488 eV. This wide bandgap makes Sr2PrSbO6\mathrm{Sr}_2\mathrm{PrSbO}_6 suitable for tandem solar cell. [52, 53, 54] The total and partial density of states (TDOS and PDOS) analyses of Sr2PrSbO6\mathrm{Sr}_2\mathrm{PrSbO}_6 indicate that it is a non-magnetic semiconductor with a bandgap at the Fermi level, where the symmetric spin-up and spin-down states confirm the absence of spin polarization. The valence band is predominantly composed of O 2p2p states with minor contributions from Sb 5p5p and Pr 4f4f states, highlighting the crucial role of oxygen in the electronic structure. In the conduction band, Sb 5d5d states are dominant, with some involvement of Pr 5p5p states, while the presence of Pr 4f4f states near the Fermi level suggests potential optical interactions. This electronic configuration makes Sr2PrSbO6\mathrm{Sr}_2\mathrm{PrSbO}_6 possible candidate for several applications, including optoelectronics (e.g., UV light-emitting diodes and laser diodes) [55], photodetectors operating in the UV-visible spectrum [56] due to its wide bandgap and ability to perform under higher voltages and temperatures. Spin-polarized calculations were performed to investigate the magnetic properties of Sr2PrSbO6\mathrm{Sr}_2\mathrm{PrSbO}_6. The results indicate that Sr2PrSbO6\mathrm{Sr}_2\mathrm{PrSbO}_6 is non-magnetic, with no net magnetic moment per unit cell. The absence of magnetism is primarily attributed to the electronic configuration and the lack of significant spin polarisation in the Pr atoms. The calculated spin density shows negligible contributions from all atoms within the unit cell, confirming the non-magnetic nature of the compound. The high activity and stability of double perovskites can be explained by having the O p-band centre neither too close nor too far from the Fermi level. In addition to electronic structure, the covalency of the B–O bond also plays a critical role in oxygen reduction reaction (ORR). A stronger covalency of the B–O bond should increase the driving force and thereby facilitate the O2−/OH−\mathrm{O}_2^-/\mathrm{OH}^- exchange on the surface B ions, which can be considered as the rate-limiting step of ORR [57]. The O p-band centre of our material falls under this criteria, which makes it a possible candidate for electrocatalysis applications.

Optical Properties

The optical properties codify key insights into aspects such as the electronic energy band and phonon vibrational modes [58, 59]. We have examined the optical characteristics of Sr2PrSbO6\mathrm{Sr}_2\mathrm{PrSbO}_6 double perovskite in the energy range of 0−150-15 eV in order to investigate their potential photonic and optoelectronic uses. The Kramers-Kronig relation for the complex dielectric function [60, 61]

ε(ω)=ε1(ω)+iε2(ω)(2)\varepsilon(\omega) = \varepsilon_1(\omega) + i\varepsilon_2(\omega) \tag*{(2)}

can be used to express the dielectric properties. In this relation, ε1(ω)\varepsilon_1(\omega) is the real part that aids in determining the polarization and dispersion of light, and ε2(ω)\varepsilon_2(\omega) is the imaginary part that describes the material’s absorptive properties. Understanding the optical properties of this material, including refractive index n(ω)n(\omega), absorption coefficient α(ω)\alpha(\omega), reflectivity R(ω)R(\omega), and energy loss spectra L(ω)L(\omega), is based on these components, ε1(ω)\varepsilon_1(\omega) and ε2(ω)\varepsilon_2(\omega). The following describes the relationship between the dielectric constants and other optical parameters: [59, 62, 63, 64]

n(ω)=12(ε12(ω)+ε22(ω)+ε1(ω))1/2(3)n(\omega) = \frac{1}{\sqrt{2}}\left(\sqrt{\varepsilon_1^2(\omega)+\varepsilon_2^2(\omega)}+\varepsilon_1(\omega)\right)^{1/2} \tag*{(3)}
R(ω)=∣ε(ω)−1ε(ω)+1∣2(4)R(\omega) = \left|\frac{\sqrt{\varepsilon(\omega)}-1}{\sqrt{\varepsilon(\omega)}+1}\right|^2 \tag*{(4)}
α(ω)=2ωkc(5)\alpha(\omega) = \frac{2\omega k}{c} \tag*{(5)}
L(ω)=ε2(ω)ε12(ω)+ε22(ω)(6)L(\omega) = \frac{\varepsilon_2(\omega)}{\varepsilon_1^2(\omega)+\varepsilon_2^2(\omega)} \tag*{(6)}

Specific electronic transitions between the valence and conduction bands are represented by the characteristic peaks that appear in the optical spectra [65]. From Figure 4(a) we can see that the static dielectric constant ε1(0)\varepsilon_1(0) is 2.66. The charge carrier recombination rate, which impacts optoelectronic device performance, is strongly influenced by the static dielectric constant [66].Materials with a high dielectric constant exhibit a lower charge carrier recombination rate, thereby enhancing device performance. It can also be seen from Figure 4 (a) that As energy increases, the dielectric function’s real portion ϵ1(ω)\epsilon_{1}(\omega), begins to rise and reaches its maximum value of 7.01 at 5.57 eV.Then it starts to decrease and reaches to a minimum value of -1.64 at 7.27 eV.The negative value in the UV region means maximum reflectivity as electromagnetic waves gets reflected by medium in this energy range [64].After that ϵ1(ω)\epsilon_{1}(\omega) starts to increase and approaches towards unity.

Optical properties of Sr₂PrSbO₆ as a function of photon energy

Figure 4. Optical properties of Sr2PrSbO6\mathrm{Sr}_{2}\mathrm{PrSbO}_{6} as a function of photon energy: (a) Real part of the dielectric function; (b) Imaginary part of the dielectric function; (c) Optical absorption spectrum; (d) Optical reflectivity; (e) Refractive index; (f) Electron energy loss spectrum (EELS). Highlighted regions indicate the energy ranges of interest.

The dielectric function’s imaginary portion ϵ2(ω)\epsilon_{2}(\omega), which describes the absorption characteristics of double perovskite materials and is inextricably tied to their electronic band structure, is shown in Figure 4(b). The photon energy at which ϵ2(ω)\epsilon_{2}(\omega), first appears is approximately 3.52 eV, which is in good agreement with the band gap energies of the materials. This suggests that electronic transitions from the valence band to the conduction band occur as a result of the materials’ absorption of photons at energies that match their band gaps.The prominent peak in ϵ2(ω)\epsilon_{2}(\omega) is observed at around 6.23 eV.The sharp decline after that suggests minimal interaction between the material’s surface and the incident electromagnetic radiation [67].At around 11.40 eV ϵ2(ω)\epsilon_{2}(\omega) approaches zero indicating that the material acts transparent above this energy range which is likely due to the absence of available electronic states for transition.

The absorption spectra reflects the distortion of light intensity as it traverses a unit distance in an absorbing medium. Figure 4(c) illustrates the absorption spectra of Sr2PrSbO6\mathrm{Sr}_{2}\mathrm{Pr}\mathrm{Sb}\mathrm{O}_{6} highlighting prominent peak between 6 eV to 11 eV covering the whole UV region; hence, the compound exhibits elevated absorbance and negligible electron losses in the ultraviolet area. Consequently, this double perovskite functions as effective UV absorbers, mitigating the detrimental impacts of UV radiation and presenting prospective uses in UV phototherapy and photovoltaic cells.Figure 4(c) illustrates that the absorption coefficient α(ω)\alpha(\omega) is minimal across the visible spectrum and increases gradually in the ultraviolet region.The optical transparency in the visible spectrum indicates considerable potential for using these materials as a hole transport layer (HTM) in solar cells.

The refractive index n(ω)n(\omega) of Sr2PrSbO6\mathrm{Sr}_{2}\mathrm{PrSbO}_{6} closely resembles the shape of the real part of the dielectric function ϵ1(ω)\epsilon_{1}(\omega) as depicted in Figure 4 (e). The calculated static refractive index ϵ(0)\epsilon(0) is 1.63. The value of n(ω)n(\omega) is significantly high between 4 eV and 7.13 eV. It is important to emphasise that this material can function well as inner layer coatings in UV absorbing devices [68] because of their high refractive index in the ultraviolet (UV) region. The refractive index then gradually drops and, at high energies, falls below unity, suggesting a weaker interaction between the material and incident electromagnetic radiation.

Electron energy loss spectra (EELS) characterise the energy dissipation of a high-velocity electron as it traverses a medium. When electrons in the material absorb photon energy, a high-speed electron loses some of its energy, leading to collective electron oscillations that can be identified in the L(ω)L(\omega) spectra [61]. Figure 4(f) presents peak in the high energy region of the L(ω)L(\omega) spectra, signifying considerable electron losses in this area relative to the visible region. When the incident frequency of the electromagnetic wave is below the plasma frequency, electrons within the material can move sufficiently fast to produce plasma oscillations, which effectively screen or negate the external electric field. This leads to enhanced reflectivity, marked by peaks in the UV region of L(ω)L(\omega) spectra that align with minima in the reflectivity spectrum in Figure 4(e). Sr2PrSbO6\mathrm{Sr}_{2}\mathrm{PrSbO}_{6} exhibits a sharp energy loss peak at around 10.5 eV, corresponding to the plasmon resonance frequency. This suggests its suitability for plasmonic applications [69], such as sensors and plasmonic waveguides, where tunable optical properties are required.

In conclusion, the optical properties of Sr2PrSbO6\mathrm{Sr}_{2}\mathrm{PrSbO}_{6} make this compound promising for widespread optoelectronic applications, ranging from high-speed photonics to solar energy harvesting and plasmonics. [69, 70]

Thermoelectric Property

Comprehending the thermoelectric characteristics of materials is crucial for transforming waste heat into usable energy. Annually, around 20-50% of industrial energy intake is lost as waste heat [71]. Thermoelectric materials can directly transform thermal energy into electrical power, hence improving total energy efficiency. In this part, we have examined the thermoelectric characteristics of Sr2PrSbO6\mathrm{Sr}_{2}\mathrm{PrSbO}_{6} within the temperature range of 300 to 700 K. The constant relaxation time approximation was employed to compute thermoelectric parameters including the Seebeck coefficient (SS), electronic thermal conductivity per relaxation time (κe/τ0\kappa_{\mathrm{e}}/\tau_{0}) and electrical conductivity per relaxation time (σ/τ0\sigma/\tau_{0}) using the BoltzTrap2 algorithm [44].

The Seebeck coefficient is measured in terms of voltage induced at the cost of temperature gradient across a conductor. The sign of SS denotes the nature of the dominant charge carriers. A positive SS indicates p-type semiconductors, where holes are the dominant charge carriers, whereas a negative SS denotes n-type semiconductors, characterized by electrons as the primary charge carriers. We simulated the Seebeck coefficient of Sr2PrSbO6\mathrm{Sr}_{2}\mathrm{PrSbO}_{6} and plotted the relationship between the Seebeck coefficient SS and μ−Ef\mu- E_f under three different temperature conditions (300 K, 500 K and 700 K), as shown in Figure 5(a). The data demonstrate that the compound exhibits substantial Seebeck coefficient values in both the positive and negative ranges, indicating the presence of both types of charge carriers in the systems. SS attains its greatest values in the range of μ−Ef\mu- E_f values of -0.09 RyR_y to 0.01 RyR_y levels. The material demonstrates substantial Seebeck coefficients of approximately 1569 μ\muK V−1^{-1} at 300 K. When the temperature is increased to high temperature, the material under investigation show a decrease in SS value, indicating that at high temperature the Seebeck coefficient decreases. The compound would perform well as a thermoelectric material at around 300 K.

Variation in the thermoelectric properties of Sr₂PrSbO₆

Figure 5. Variation in the thermoelectric properties of Sr₂PrSbO₆ as a function of μ−Ef\mu- E_f at different temperatures (300 K, 500 K, 700 K): (a) Seebeck coefficient (SS); (b) Electrical conductivity scaled by relaxation time (σ/τ\sigma/\tau); (c) Electronic thermal conductivity scaled by relaxation time (κe/τ\kappa_e/\tau). The dashed vertical line indicates the Fermi level (EfE_f).

For optimal thermoelectric performance, a compound must demonstrate higher electrical conductivity. The plots of electrical conductivity versus μ−Ef\mu- E_f at various temperatures are presented in Figure 5(b). It can be noticed from the plots that the value of σ\sigma is higher at negative μ−Ef\mu- E_f than in the positive μ−Ef\mu- E_f region. This result implies that hole doping in this material will be more beneficial for thermoelectric applications than electron doping.

From the point of view of temperature change, the σ\sigma values of Sr2_2PrSbO6_6 at low temperature contain many burr-like peaks, as shown in Figure 5(b). This indicates that the conductivity fluctuates greatly with the change in μ−Ef\mu- E_f, but the overall change trend is the same. At 300 K, the maximum value of σ\sigma for Sr2_2PrSbO6_6 is found to be approximately 1.1289×1022 Ω−1m−1s−11.1289 \times10^{22}\ \Omega^{-1}\mathrm{m}^{-1}\mathrm{s}^{-1}. However, when the temperature is increased from 300 K to 900 K, σ\sigma decreases with temperature. The slight decrease in the electrical conductivity with the increasing temperature may be attributed to increasing charge carrier concentration, collision, and scattering phenomena. The phenomenon of heat conduction in a material by moment of free electrons and lattice vibration is termed thermal conductivity κ\kappa. This conductivity results from lattice vibrations occurring within the compounds during the motion of thermally excited electrons, encompassing both electronic κe\kappa_e and phononic κl\kappa_l components. This study calculates thermal conductivity while disregarding the phononic component, despite its contribution to the material’s total thermal conductivity. This is because BoltzTraP2 code does not incorporate this contribution. This exclusion has been noticed in other comparable investigations owing to the identical computational limitation [72, 73]. Figure 5(c) illustrates the variation of electronic thermal conductivity versus μ−Ef\mu- E_f at 300 K, 500 K, and 700 K. It can be noticed from the figure that both the compounds exhibited higher thermal conductivity for negative μ−Ef\mu- E_f, and their thermal conductivity is found to be ∼1.759×1017 WΩ−1m−1s−1\sim1.759 \times10^{17}\ \mathrm{W}\Omega^{-1}\mathrm{m}^{-1}\mathrm{s}^{-1} at 300 K. However, in contrast to electrical conductivity, electronic thermal conductivity increases drastically when the temperature goes from 300 K to 700 K and achieves maximum peaks ∼1.759×1017 W Ω−1m−1s−1\sim1.759 \times10^{17}\ \mathrm{W}\ \Omega^{-1}\mathrm{m}^{-1}\mathrm{s}^{-1}. It can also be noticed from the plots that both electrical and thermal conductivities show similar profiles. Hence, the results follow the Wiedemann-Franz law. [74]

To enhance the precision of the assessment regarding the conversion of thermal to electrical energy, the figure of merit (ZTZT) was calculated near Ef=0E_f = 0 using the formula

ZT=σS2TκZT = \frac{\sigma S^2 T}{\kappa}

[75] and summarised in Table 4. The ZTZT value measures the highest conversion efficiency attainable by a thermoelectric device. It is noticeable that at 300K the ZTZT value was found to be 0.331. It is essential to recognize that the ZTZT values obtained have the potential for enhancement via the implementation of strain effects or the refinement of doping strategies [76]. These findings suggest that Sr2_2PrSbO6_6 is highly promising thermoelectric material, making it suitable for various applications in energy conversion technologies.

Temperature (K)300500700
SS (μV/K\mu\mathrm{V}/\mathrm{K})70-1811
σ/τ\sigma/\tau (1/Ω m s1/\Omega\ \mathrm{m}\ \mathrm{s})5.4×10215.4 \times10^{21}3.9×10213.9 \times10^{21}3×10213 \times10^{21}
κe/τ\kappa_{\mathrm{e}}/\tau (W/mK s\mathrm{W}/\mathrm{mK}\ \mathrm{s})2.4×10162.4 \times10^{16}4.62×10164.62 \times10^{16}6.41×10166.41 \times10^{16}
ZT0.3310.0130.004

Table 4. Thermoelectric Properties at Various Temperatures Near Ef=0E_f = 0

Conclusion

This study utilises first-principles Density Functional Theory (DFT) computations to examine the structural, electronic, optical, and thermoelectric properties of Sr2_2PrSbO6_6, a double perovskite with considerable potential for advanced engineering applications. The material crystallises in a cubic perovskite structure exhibiting high thermodynamic stability, as evidenced by its negative formation energy of −22.77-22.77 eV per formula unit. The calculated Goldschmidt tolerance factor of 0.968 signifies structural stability, making it a suitable option for practical applications.

The investigation of the electronic band structure indicates a substantial direct bandgap of 3.488 eV, categorising Sr2_2PrSbO6_6 as a wide bandgap semiconductor which is appropriate for use in UV light-emitting diodes (LEDs), photovoltaic cells, and high-power electronics. Assessments of optical properties indicate significant absorption in the UV-visible spectrum and elevated refractive indices, reinforcing its applicability in optoelectronic devices and plasmonic applications. The thermoelectric investigation reveals a significant Seebeck coefficient and advantageous electrical and thermal conductivity, positioning Sr2_2PrSbO6_6 as a viable choice for energy conversion technologies, including waste heat recovery systems.

The lack of magnetism, along with the material’s resilience to breakdown and strong covalent bonding in B–O interactions, underscores its potential for high-temperature and chemically rigorous applications, such as electrocatalysis. These findings establish Sr2_2PrSbO6_6 as a multifunctional material with potential to contribute significantly to next-generation electronic, photonic, and energy systems, making it a compelling subject for further experimental validation and engineering development.

This study establishes a foundation for utilising Sr2_2PrSbO6_6 in industrial and technical applications, providing a significant contribution to the progression of functional materials in optoelectronics, thermoelectrics, and sustainable energy solutions.

Declaration of Competing Interest

The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.

Data Availability

The data supporting the findings of this study are available upon request from the corresponding author.

Author Contributions

Md. Mohiuddin designed the study and performed the calculations analyzed the data and wrote the manuscript. A. Kabir administered the project and supervised the investigations by guiding the computations, analyzed the data. All authors reviewed the manuscript.

Acknowledgments

The authors acknowledge the University of Dhaka for facilitating the research environment in the Department of Physics, and Bangladesh Research and Education Network BdREN (bdren.net.bd) for the computational lab facilities.

References

  1. [11]Weng, B. et al. A layered Na₁₋ₓNiᵧFe₁₋ᵧO₂ double oxide oxygen evolution reaction electrocatalyst for highly efficient water-splitting. Energy Environ. Sci. 10, 121–128 (2017).
  2. [12]Sun, S. et al. Bandgap Engineering of Stable Lead-Free Oxide Double Perovskites for Photovoltaics. Adv. Mater. 30, 1705901 (2018).DOI
  3. [13]Weng, B. et al. Barium Bismuth Niobate Double Perovskite/Tungsten Oxide Nanosheet Photoanode for High-Performance Photoelectrochemical Water Splitting. Adv. Energy Mater. 8, 1701655 (2018).DOI
  4. [14]Pérez-Tomás, A., Mingorance, A., Tanenbaum, D. & Lira-Cantú, M. Metal Oxides in Photovoltaics: All-Oxide, Ferroic, and Perovskite Solar Cells. In The Future of Semiconductor Oxides in Next-Generation Solar Cells, Elsevier, 267–356 (2018).
  5. [15]Grinberg, I. et al. Perovskite oxides for visible-light-absorbing ferroelectric and photovoltaic materials. Nature 503, 509–512 (2013).DOI
  6. [16]Ge, J., Yin, W.-J. & Yan, Y. Solution-Processed Nb-Substituted BaBiO₃ Double Perovskite Thin Films for Photoelectrochemical Water Reduction. Chem. Mater. 30, 1017–1031 (2018).DOI
  7. [17]Peña, M. A. & Fierro, J. L. G. Chemical Structures and Performance of Perovskite Oxides. Chem. Rev. 101, 1981–2018 (2001).pubmed.ncbi.nlm.nih.gov/11710238
  8. [18]Cohen, R. E. Origin of ferroelectricity in perovskite oxides. Nature 358, 136–138 (1992).DOI
  9. [19]García-Martín, S., King, G., Nénert, G., Ritter, C. & Woodward, P. M. The Incommensurately Modulated Structures of the Perovskites NaCeMnWO₆ and NaPrMnWO₆. Inorg. Chem. 51, 4007–4014 (2012).
  10. [20]Fernández-Martínez, F., Montero, J. L., Carrillo, I. & Colón, C. FT-Raman and FT-IR vibrational spectroscopic studies of Sr₂RE₃B₆O₆ (RE = La to Lu and Y) double perovskites. J. Alloys Compd. 538, 34–39 (2012).
  11. [21]Chen, X., Xu, J., Xu, Y., Luo, F. & Du, Y. Rare earth double perovskites: a fertile soil in the field of perovskite oxides. Inorg. Chem. Front. 6, 2226–2238 (2019).DOI
  12. [22]Rani, M. et al. Rare earth-based oxides double perovskites A₂NiMnO₆ (A= La and Gd): Applications in magneto-caloric, photo-catalytic and thermoelectric devices. Phys. B Condens. Matter 680, 415645 (2024).DOI
  13. [23]Otsuka, S. & Hinatsu, Y. Structures and magnetic properties of rare earth double perovskites containing antimony or bismuth Ba₂LnMO₆ (Ln=rare earths; M=Sb, Bi). J. Solid State Chem. 227, 132–141 (2015).DOI
  14. [24]Mahato, D. K., Rudra, M. & Sinha, T. P. Structural and electrical features of rare earth based double perovskite oxide: Pr₂NiZrO₆. J. Alloys Compd. 689, 617–624 (2016).DOI
  15. [25]Das, P. et al. Investigation of electrical and magnetic properties of rare-earth based double perovskite: Dy₂CoMnO₆. Ferroelectrics 588, 1–8 (2022).DOI
  16. [26]Dar, S. A. et al. Study of structural, electronic, magnetic, and optical properties of A₂FeMnO₆ (A = Ba, La) double perovskites, experimental and DFT analysis. Colloids Surf. A Physicochem. Eng. Asp. 664, 131145 (2023).DOI
  17. [27]Kumar, A. et al. Experimental and theoretical studies of structural, electronic and magnetic properties of RE₂NiCrO₆ (RE= Ce, Pr and Nd) double perovskites. Physica B: Condensed Matter 633, 413801 (2022).
  18. [28]Laghzaoui, S., Lamrani, A. F. & Laamara, R. A. Robust half-metallic ferromagnet in doped double perovskite Sr₂TiCoO₆ by rare-earth elements for photovoltaic and thermoelectric conversion: A DFT method. J. Phys. Chem. Solids 183, 111639 (2023).DOI
  19. [29]Al-Qaisi, S. et al. A comprehensive first-principles study on the physical properties of Sr₂ScBiO₆ for low-cost energy technologies. Opt. Quantum Electron. 55, 1015 (2023).DOI
  20. [30]Hanif, M. et al. Theoretical investigation of physical properties of Sr₂XNbO₆ (X = La, Lu) double perovskite oxides for optoelectronic and thermoelectric applications. Int. J. Energy Res. 46, 16884–16902 (2022).DOI
  21. [31]Haid, S. et al. Thermoelectric, Structural, Optoelectronic and Magnetic properties of double perovskite Sr₂CrTaO₆: First principle Study. Mater. Sci. Eng. B 245, 68–74 (2019).DOI
  22. [32]Sun, Q. & Yin, W.-J. Thermodynamic Stability Trend of Cubic Perovskites. J. Am. Chem. Soc. 139, 14905–14908 (2017).DOI
  23. [33]Hudgins, J. L., Simin, G. S., Santi, E. & Khan, M. A. An assessment of wide bandgap semiconductors for power devices. IEEE Trans. Power Electron. 18, 907–914 (2003).DOI
  24. [34]Hohenberg, P. & Kohn, W. Inhomogeneous Electron Gas. Phys. Rev. 136, B864–B871 (1964).
  25. [35]Payne, M. C., Teter, M. P., Allan, D. C., Arias, T. A. & Joannopoulos, J. D. Iterative minimization techniques for ab initio total-energy calculations: molecular dynamics and conjugate gradients. Rev. Mod. Phys. 64, 1045–1097 (1992).DOI
  26. [36]Kohn, W. & Sham, L. J. Self-Consistent Equations Including Exchange and Correlation Effects. Phys. Rev. 140, A1133–A1138 (1965).DOI
  27. [37]Gillan, M. J. Calculation of the vacancy formation energy in aluminium. J. Phys. Condens. Matter 1, 689 (1989).DOI
  28. [38]Vanderbilt, D. Soft self-consistent pseudopotentials in a generalized eigenvalue formalism. Phys. Rev. B 41, 7892–7895 (1990).pubmed.ncbi.nlm.nih.gov/9993096
  29. [39]Kresse, G. & Furthmüller, J. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set. Comput. Mater. Sci. 6, 15–50 (1996).DOI
  30. [40]Kresse, G. & Joubert, D. From ultrasoft pseudopotentials to the projector augmented-wave method. Phys. Rev. B 59, 1758–1775 (1999).DOI
  31. [41]Paier, J., Hirschl, R., Marsman, M. & Kresse, G. The Perdew-Burke-Ernzerhof exchange-correlation functional applied to the G2-1 test set using a plane-wave basis set. J. Chem. Phys. 122, 234102 (2005).pubmed.ncbi.nlm.nih.gov/16008425
  32. [42]Perdew, J. P., Burke, K. & Ernzerhof, M. Generalized Gradient Approximation Made Simple. Phys. Rev. Lett. 77, 3865–3868 (1996).pubmed.ncbi.nlm.nih.gov/10062328
  33. [43]Wang, V., Xu, N., Liu, J.-C., Tang, G. & Geng, W.-T. VASPKIT: A user-friendly interface facilitating high-throughput computing and analysis using VASP code. Comput. Phys. Commun. 267, 108033 (2021).
  34. [44]Madsen, G. K. H., Carrete, J. & Verstraete, M. J. BoltzTraP2, a program for interpolating band structures and calculating semi-classical transport coefficients. Comput. Phys. Commun. 231, 140–145 (2018).
  35. [45]Sato, T., Takagi, S., Deledda, S., Hauback, B. C. & Orimo, S. Extending the applicability of the Goldschmidt tolerance factor to arbitrary ionic compounds. Sci. Rep. 6, 23592 (2016).DOI
  36. [46]Jin, S. Can We Find the Perfect A-Cations for Halide Perovskites? ACS Energy Lett. 6, 3386–3389 (2021).DOI
  37. [47]Melius, C. F. The Thermochemistry and Reaction Pathways of Energetic Material Decomposition and Combustion. Philos. Trans. R. Soc. Lond., Phys. Sci. Eng. 339(1654), 365–376 (1992).
  38. [48]Volonakis, G., Filip, M. R., Haghighirad, A. A., Sakai, N., Wenger, B., Snaith, H. J. & Giustino, F. Lead-Free Halide Double Perovskites via Heterovalent Substitution of Noble Metals. J. Phys. Chem. Lett. 7, 1254–1259 (2016).arxiv.org/abs/1603.01585
  39. [49]Charifi, Z., Baaziz, H., Uğur, Ş. & Uğur, G. Prediction of the electronic structure, optical and vibrational properties of ScXCo₂Sb₂ (X = V, Nb and Ta) double half-Heusler alloys: a theoretical study. Indian J. Phys. 97, 413–428 (2023).DOI
  40. [50]Abdullah, D. & Gupta, D. C. Exploring the half-metallic ferromagnetism, dynamical and mechanical stability, optoelectronic and thermoelectric properties of K₂NaMnI₆ (M = Mn, Co, Ni) for spintronic applications. Sci. Rep. 13, 1–16 (2023).DOI
  41. [51]Touati, F., Mnif, F. & Lawati, A. High-Temperature Electronics: Status and Future Prospects in the 21st Century. J. Eng. Res. TJER 3, 43–54 (2006).DOI
  42. [52]Chen, Q., Zhou, L., Zhang, J., Chen, D., Zhu, W., Xi, H., Zhang, J., Zhang, C. & Hao, Y. Recent Progress of Wide Bandgap Perovskites towards Two-Terminal Perovskite/Silicon Tandem Solar Cells. Nanomaterials 14, 202 (2024).DOI
  43. [53]Forgács, D., Pérez-del-Rey, D., Ávila, J., Momblona, C., Gil-Escrig, L., Dänekamp, B., Sessolo, M. & Bolink, H. J. Efficient wide band gap double cation – double halide perovskite solar cells. J. Mater. Chem. A 5(7), 3203–3207 (2017).
  44. [54]Fang, Z., Deng, B., Jin, Y., Yang, L., Chen, L., Zhong, Y., Feng, H., Yin, Y., Liu, K., Li, Y., Zhang, J., Huang, J., Zeng, Q., Wang, H., Yang, X., Yang, J., Tian, C., Xie, L., Wei, Z., & Xu, X. Surface reconstruction of wide-bandgap perovskites enables efficient perovskite/silicon tandem solar cells. Nat. Commun. 15(1), 10554 (2024).DOI
  45. [55]Shahzad, M. K., Hussain, S., Riaz, M., Sattar, H., Ashraf, G. A., Azeem, W., Ali, S. M. & Alam, M. Investigation of ultra wide bandgap Fluoro-perovskite materials RBeF₃ (R = K and Li) for smart window applications: A DFT study. Heliyon 10(7), e29143 (2024).
  46. [56]Zhou, X., Lu, Z., Zhang, L. & Ke, Q. Wide-bandgap all-inorganic lead-free perovskites for ultraviolet photodetectors. Nano Energy 117, 108908 (2023).DOI
  47. [57]Grimaud, A., May, K. J., Carlton, C. E., Lee, Y.-L., Risch, M., Hong, W. T., Zhou, J. & Shao-Horn, Y. Double perovskites as a family of highly active catalysts for oxygen evolution in alkaline solution. Nat. Commun. 4, 2439 (2013).
  48. [58]Solid State Properties: From Bulk to Nano. https://link.springer.com/book/10.1007/978-3-662-55922-2 (SpringerLink, 2022).
  49. [59]Fox, M. Optical Properties of Solids, Vol. 3. Oxford University Press (2010).
  50. [60]Albanesi, E. A., Peltzer y Blanca, E. L. & Petukhov, A. G. Calculated optical spectra of IV–VI semiconductors PbS, PbSe and PbTe. Comput. Mater. Sci. 32, 85–95 (2005).DOI
  51. [61]Kumar, V. & Roy, D. R. Strain-induced band modulation and excellent stability, transport and optical properties of penta-MP₂ (M = Ni, Pd, and Pt) monolayers. Nanoscale Adv. 2(10), 4566–4580 (2020).DOI
  52. [62]Saha, S., Sinha, T. P. & Mookerjee, A. Electronic structure, chemical bonding, and optical properties of paraelectric BaTiO₃. Phys. Rev. B 62, 8828–8834 (2000).DOI
  53. [63]Dar, S. A., Sharma, R., Srivastava, V. & Sakalle, U. K. Investigation on the electronic structure, optical, elastic, mechanical, thermodynamic and thermoelectric properties of wide band gap semiconductor double perovskite Ba₂InTaO₆. RSC Adv. 9, 9522–9532 (2019).DOI
  54. [64]Hilal, M., Rashid, B., Khan, S. H. & Khan, A. Investigation of electro-optical properties of InSb under the influence of spin-orbit interaction at room temperature. Mater. Chem. Phys. 184, 41–48 (2016).DOI
  55. [65]Flores, M. Z. S., Freire, V. N., dos Santos, R. P., Farias, G. A., Caetano, E. W. S., de Oliveira, M. C. F., Fernandez, J. R. L., Scolfaro, L. M. R., Bezerra, M. J. B., Oliveira, T. M., Bezerra, G. A., Cavada, B. S. & Leite Alves, H. W. Optical absorption and electronic band structure first-principles calculations of α-glycine crystals. Phys. Rev. B 77, 115104 (2008).DOI
  56. [66]Liu, X., Xie, B., Duan, C., Wang, Z., Fan, B., Zhang, K., Lin, B., Colberts, F. J. M., Ma, W., Janssen, R. A. J., Huang, F. & Cao, Y. A high dielectric constant non-fullerene acceptor for efficient bulk-heterojunction organic solar cells. J. Mater. Chem. A 6, 395–403 (2018).DOI
  57. [67]Rouf, S. A., Hussain, M. I., Mumtaz, U., Majeed, A. M. & Masood, H. T. A density functional theory study of the structural, electronic, and optical properties of XGaO₃ (X = V, Nb) perovskites for optoelectronic applications. J. Comput. Electron. 20(4), 1484–1495 (2021).DOI
  58. [68]Dey, A., Baraiya, B. A., Adhikary, S. & Jha, P. K. First-principles calculations of the effects of edge functionalization and size on the band gap of Be₃N₂ nanoribbons: Implications for nanoelectronic devices. ACS Appl. Nano Mater. 4(1), 493–502 (2020).DOI
  59. [69]Ai, B., Fan, Z. & Wong, Z. J. Plasmonic–perovskite solar cells, light emitters, and sensors. Microsyst. Nanoeng. 8(1), 5 (2022).DOI
  60. [70]Yao, Y., Li, B., Ding, D., Kan, C., Hang, P., Zhang, D., Hu, Z., Ni, Z., Yu, X., & Yang, D. Oriented wide-bandgap perovskites for monolithic silicon-based tandems with over 1000 hours operational stability. Nat. Commun. 16(1), 40 (2025).DOI
  61. [71]Southwest Research Institute. Waste heat recovery research.
  62. [72]Khandy, S. A. & Gupta, D. C. Investigation of structural, magneto-electronic, and thermoelectric response of ductile SnAlO₃ from high-throughput DFT calculations. Int. J. Quantum Chem. 117(8), e25351 (2017).DOI
  63. [73]Hasan, S. et al. First-principles calculations of thermoelectric transport properties of quaternary and ternary bulk chalcogenide crystals. Materials 15(8), 2843 (2022).DOI
  64. [74]Yadav, A., Deshmukh, P. C., Roberts, K., Jisrawi, N. M. & Valluri, S. R. An analytic study of the Wiedemann–Franz law and the thermoelectric figure of merit. J. Phys. Commun. 3(10), 105001 (2019).arxiv.org/abs/1904.03183
  65. [75]Olivieri, A. C. & Escandar, G. M. Analytical Figures of Merit. In Practical Three-Way Calibration, edited by A. C. Olivieri & G. M. Escandar, pp. 93–107. Elsevier, Boston, 2014.
  66. [76]Cheng-Wei, W. et al. Enhanced high-temperature thermoelectric performance by strain engineering in BiOCl. Phys. Rev. Appl. 18(1), 014053 (2022).

Paper details

vlnc:W_zd83ekpy
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents