betaFeedback

WorksPhysics and Astronomy

Kinetic Monte Carlo modeling of ammonium formate NH4+_4^+HCOO−^- and ammonium cyanate NH4+_4^+OCN−^- in interstellar ices

Abstract

JWST observations have revealed evidence for NH4+_4^+ in the ices of the Chamaeleon I dark molecular cloud, with HCOO−^- and OCN−^- likely counter ions. Laboratory experiments have demonstrated that ammonium formate and ammonium cyanate can form through acid-base reactions involving NH3_3 at cryogenic temperatures. The formation of these two ammonium salts are simulated to investigate their formation in dark-cloud ices and assess their sensitivity to uncertainties in the chemical reaction network, including the recently considered HOCO-mediated pathway for CO2_2 formation, as well as variations in the cosmic-ray ionization rate, cloud collapse timescale and density, and elemental depletion. Our modeling framework consists of microscopic kinetic Monte Carlo (KMC) simulations of grain-surface chemistry augmented by UCLCHEM gas-phase and physical cloud evolution simulations. The microscopic KMC method provides for explicit simulation of the location, movement and reaction of ice species, making it particularly well-suited to model acid-base chemistry of NH4+_4^+-salt formation, occurring within the ice mantle over extended timescales. The simulations produce the canonical ice-evolution sequence, with an initially H2_2O-rich ice followed by a layer dominated by CO and CO2_2. Salt production is dominated by NH4+_4^+HCOO−^-, which is found to form predominantly during the H2_2O-rich stage as its production is limited by the availability of NH3_3. NH4+_4^+OCN−^- is found to form later at the interface between the H2_2O- and CO-rich ice when the formation of its precursor acid HNCO is enabled. Despite the variations explored, the total NH4+_4^+ abundance, particularly relative to H2_2O, remains remarkably robust and consistent with the observed abundance. Depending on the variation, a redistribution between counterions HCOO−^- and OCN−^- is observed.

Introduction

Recent James Webb Space Telescope (JWST) observations have affirmed the presence of ammonium salts in interstellar ices within dark molecular clouds [63]. Ammonium salts are a class of chemical compounds containing the ammonium ion (NH4+\mathrm{NH_4^+}) and a counter anion, which can form through acid-base reactions between ammonia (NH3\mathrm{NH_3}) and acids. The NH4+\mathrm{NH_4^+} ion was detected toward two background sources, J110621 and NIR38, in the Chamaeleon I dense molecular cloud through its mid-infrared absorption feature at 6.85 μm6.85\,\mu\mathrm{m}. This absorption feature has long been observed in interstellar ices, initially primarily toward relatively warm young stellar objects in observations with the Infrared Space Observatory (ISO) and later with Spitzer [57, 10]. The feature was proposed to arise in part from the ν4\nu_4 vibrational mode of NH4+\mathrm{NH_4^+}, based on laboratory experiments [90]. Now the JWST observations provide strong evidence for the presence of NH4+\mathrm{NH_4^+} in the cold, dense molecular-cloud environment of Chamaeleon I [63]. The inferred column density of NH4+\mathrm{NH_4^+} is of the same order as ammonia: N(NH4+)≈N(NH3)N(\mathrm{NH_4^+}) \approx N(\mathrm{NH_3}), indicating that ammonium is present in significant abundance.

The presence of ammonium in dark molecular clouds indicates that ammonium salts can already form at an early stage of star formation at very low temperatures (T∼10 KT \sim10\ \mathrm{K}). In this stage, ices forming on nanosized carbon/silicate grains, regulate much of the chemistry and are crucial to explaining the rich molecular inventory found in the dense areas of the interstellar medium (ISM). In contrast to the gas – which contains most of the mass of the molecular cloud – the grain-surface chemistry enables the formation of molecules, such as CH3OH\mathrm{CH_3OH}, H2O\mathrm{H_2O} and NH3\mathrm{NH_3}, as well as more complex species (involving more atoms). Locked in the ices, these molecules are the main reservoir of volatile elements that influence the chemistry in subsequent stages and environments of star formation (see, e.g., [81, 17, 85]).

Ammonium salts are typically more thermally stable than their neutral precursors, allowing them to remain on grain surfaces well above the desorption temperatures of their constituent molecules. For example, experiments [69, 38] (Kruckzkiewicz et al. 2021) have shown that ammonium formate (NH4+HCOO−\mathrm{NH_4^+HCOO^-}), ammonium acetate (NH4+CH3COO−\mathrm{NH_4^+CH_3COO^-}), and ammonium cyanide (NH4+CN−\mathrm{NH_4^+CN^-}) desorb at temperatures higher or comparable to the water-ice desorption temperature [29]. Ammonium salts may therefore retain nitrogen on grain surfaces after the desorption of their neutral precursors and other volatile ice constituents, potentially affecting the evolution of the elemental nitrogen budget through the various stages of star formation. For example, the study of ammonium formate and ammonium acetate desorption by Kruczkiewicz et al. [58] showed that the ammonium sublimation zone is expected to lie within the water snowline, closer to the core of a protostar. This could alter the distribution of nitrogen across the protoplanetary disk relative to the conventional picture in which N-bearing species desorb with the water ice mantle, and would have important implications for identifying the main nitrogen carriers in the environment of a developing star. Since ammonium salts can play a role in the formation of complex organic molecules (COMs) and (pre)biotic species [79], they can also act as reservoirs of molecules and functional groups that would otherwise desorb at lower temperatures, potentially preserving precursors for subsequent COM and prebiotic chemistry.

The implications of nitrogen retention in ammonium salts on grains extend beyond the protostellar environment and may also help explain the apparent nitrogen depletion in comets. While nitrogen is only lightly depleted in the ISM and appears to remain predominantly in the gas as diffuse clouds evolve into dense clouds [88, 52], a significant depletion is observed in comets [28]. Measurements by the Giotto and Rosetta missions toward comets 1P/Halley and 67P/Churyamov-Gerasimenko respectively, found N/C ratios up to an order of magnitude lower than solar-system values [53, 30, 61], while the N/Si ratio in 1P/Halley was also found to be lower than the solar value [37]. Ammonium salts have emerged as a potential reservoir of this missing nitrogen, with their presence in comet 67P supported by several independent measurements, including the detection of sublimation products in the coma [2], identification of the 3.2 µm absorption band with NH4+\mathrm{NH}_{4}^{+} [82, 77, 78], and direct in-situ measurements of ammonium salts in dust grains released from the cometary nucleus [3]. Although several formation scenarios have been proposed, the salts may at least in part have a prestellar origin [3]. Correlations between protostellar and cometary chemical compositions [1, 25, 86] further support the possibility that ammonium salts were formed on icy dust grains within the molecular cloud and subsequently incorporated into cometary material.

Given their importance and confirmed detection, it would be desirable to take NH4+\mathrm{NH}_{4}^{+} salts into account in astrochemical models of dark-cloud ices, elucidate their formation on grain surfaces and assess how it depends on physical and chemical conditions. However, their explicit formation has only recently been considered in astrochemical models; to our knowledge, only one modeling effort so far has investigated ammonium salt formation, focusing on the ammonium sulfur salt NH4+SH−\mathrm{NH}_{4}^{+}\mathrm{SH}^{-} [99]. The choice of which ammonium salts to include in such models remains open, since the detection of NH4+\mathrm{NH}_{4}^{+} does not uniquely identify the counterion with which it is associated in the ice. HCOO−\mathrm{HCOO}^{-} and OCN−\mathrm{OCN}^{-} are particularly promising candidates, given their detection in interstellar ices and evidence for their association with NH4+\mathrm{NH}_{4}^{+} in laboratory and cometary material. Recent JWST observations toward starless and protostellar regions of molecular clouds [63, 86, 85] have secured the attribution of the 4.62 µm band to OCN−\mathrm{OCN}^{-} (e.g. Geballe [36]; van Broekhuizen et al. [97]). The detection of HCOO−\mathrm{HCOO}^{-} is less straightforward, as its spectral signature lies in the COM fingerprint region (6.8–8.6 µm), where spectral features from multiple molecules overlap. Nevertheless, HCOO−\mathrm{HCOO}^{-} has been identified in JWST observations toward both low- and high-mass protostars [86], where it was found to be the main carrier of the 7.2 and 7.4 µm bands. Moreover, direct evidence for ammonium formate comes from comet 67P, where a spectral reflectance feature of the cometary surface was found to match well with the laboratory spectrum of NH4+HCOO−\mathrm{NH}_{4}^{+}\mathrm{HCOO}^{-} mixed with analogue cometary surface material [77].

In this work, we investigate the formation of ammonium formate (NH4+HCOO−\mathrm{NH}_{4}^{+}\mathrm{HCOO}^{-}) and ammonium cyanate (NH4+OCN−\mathrm{NH}_{4}^{+}\mathrm{OCN}^{-}) in the ices of dark molecular clouds. Salt formation in interstellar ices has long been proposed to proceed through energetic processing of ice mantles followed by acid-base reactions (e.g. Grim et al. [40]). Although irradiation is an effective laboratory means of producing acids and ions, it may not be required for salt formation under astrophysical conditions [90, 97]. Indeed, ammonium salts can readily form through acid-base reactions with sufficiently low activation barriers to proceed at cryogenic temperatures [96]. Quantum chemical calculations [76] and laboratory experiments have shown that ammonium ions and their counter ions can form upon co-deposition of NH3\mathrm{NH}_{3} with acids such as isocyanic acid (HNCO) [70, 83] (Mispelear et al. 2012) and formic acid (HCOOH) [89, 33, 7]. We therefore focus on the formation of NH4+HCOO−\mathrm{NH}_{4}^{+}\mathrm{HCOO}^{-} and NH4+OCN−\mathrm{NH}_{4}^{+}\mathrm{OCN}^{-} through the following thermal acid-base reactions on grain surfaces:

NH3+HCOOH→NH4+HCOO−(1)\mathrm{NH}_{3}+\mathrm{HCOOH}\rightarrow\mathrm{NH}_{4}^{+}\mathrm{HCOO}^{-} \tag*{(1)}
NH3+HNCO→NH4+OCN−.(2)\mathrm{NH}_{3}+\mathrm{HNCO}\rightarrow\mathrm{NH}_{4}^{+}\mathrm{OCN}^{-}. \tag*{(2)}

At low temperatures, these reactions are expected to be facilitated provided the reactants are positioned close to each other. Bergner et al. and Mispelear et al. have shown that reactions (1) and (2) have relatively low activation barriers (70 and 48 K respectively) under such conditions. This demonstrates that thermal acid-base chemistry can provide a viable pathway for ammonium salt formation if the corresponding acids are present in the ice. HCOOH has been securely detected in interstellar ices toward protostars with JWST [86, 85], while HNCO has not yet been detected in interstellar ices; however, gas-phase abundances of HNCO have been found to correlate with solid OCN− [73].

Our modeling framework combines a microscopic kinetic Monte Carlo (KMC) model of grain-surface chemistry with the rate-equation code UCLCHEM [43], which follows the gas-phase chemistry and the physical evolution of a collapsing molecular cloud. Together, these models enable us to perform comprehensive gas- and grain-surface chemistry simulations during the evolution of a molecular cloud. The KMC program allows for a microscopic simulation where the location and movement of each individual atomic/molecule species is followed and each reaction event is explicitly simulated. These properties make the microscopic KMC method uniquely suited to model reactions between acid and base species. In particular, these reactions are expected to proceed rapidly once the reactants are in close proximity at low temperatures [7] (Mispelear et al. 2012), making the spatial distribution and mobility of the reactants important for determining their overall efficiency.

Rate-equation models, by contrast, provide a macroscopic, mean-field description of the underlying microscopic processes. The relatively recently developed non-diffusive chemistry formalism (see Ruaud et al. [87]; Chang & Herbst [15]; Shingledecker et al. [92]; Jin & Garrod [56]) can account for reactions that do not require prior thermal diffusion and may therefore provide a more appropriate treatment of these acid-base reactions than conventional Langmuir-Hinshelwood diffusion reactions. However, non-diffusive chemistry methods have primarily been developed to treat reactions with radicals leading to the formation of COMs, and their applicability to salt-formation reactions involving abundant and stable ice species, such as NH3_3, remains to be firmly established. The microscopic KMC treatment therefore provides a more direct approach for investigating ammonium-salt formation under these conditions.

We use this modeling framework to assess the sensitivity of ammonium formate and ammonium cyanate formation within the ice to uncertainties in the chemical reaction network and in the physical and chemical conditions of the molecular cloud. In particular, we investigate the effect of the CO2_2 formation network, including the recently considered HOCO radical pathway, on ammonium salt formation. Furthermore, we explore the sensitivity of ammonium salt formation to variations in the cosmic-ray ionization rate, the timescale and final density of cloud collapse, and the assumed level of elemental depletion. This paper is structured as follows. § 2 describes the modeling framework and § 3.1 presents the baseline model and its resulting ice evolution and ammonium salt formation. We investigate variations in the chemical reaction network in Sect. 3.2 and in the physical conditions in Sect. 3.3. The results of the chemical and physical variations are synthesized in Sect. 3.4, where we also compare the modeled ice composition and ammonium-salt abundances with observations. Conclusions are presented in Sect. 4.

Modeling method

The grain surface chemistry was simulated using a “continuous-time random-walk kinetic Monte Carlo” algorithm, which is an implementation of the microscopic kinetic Monte Carlo (KMC) technique that keeps track of the positions of the species on the grain. For a detailed description, an overview of the theoretical background and its application to surface astrochemistry, see Cuppen et al. [19]. The KMC code used is an adaptation of the one applied in Cuppen & Herbst [18]; Cuppen et al. [20]; Lamberts et al. [59]; Simons et al. [93]; Jiménez-Serra et al. [54].

In particular, a similar setup to Jiménez-Serra et al. [54] was used, where the gas-phase chemistry was simulated using the rate-equation code UCLCHEM (version 3.2) which includes freeze-out, H2_2 formation and a few basic hydride formation reactions as part of its grain-surface chemistry. The obtained abundances, densities, and photon fluxes were then used as input to the KMC simulation, from which the adsorption fluxes were calculated using standard kinetic gas theory (see, e.g., Cuppen et al. [21]), as well as the photodissociation rates. We note that this leads to a one-way coupling of the gas and grain chemistry. In both UCLCHEM and the KMC, thermal and chemical desorption is simulated and our setup may lead to inconsistencies if the desorption rates between the two models differ significantly. In that case, the adsorption fluxes calculated from the gas abundances (simulated by UCLCHEM) would not reflect the desorption of grain species (simulated by the KMC). We assume this effect to be negligible at the low temperatures considered here. A post-analysis confirmed that feedback from desorption has a negligible effect on the gas-phase composition, with the exception of H and H2_2.

The surface formation of H2_2 in UCLCHEM was found to be more efficient than observed in the KMC simulations, which affects the atomic H abundance in the gas. H2_2 formation through recombination on the grain is modeled by UCLCHEM using two formalisms: an effective kinetic rate equation treatment (Cazaux & Tielens [13, 14]) and Langmuir-Hinshelwood reactions. The use of these two processes independently from each other can lead to “double” formation of H2_2, which is especially problematic for our one-way coupled setup between UCLCHEM and KMC simulations, as the atomic hydrogen is lost from the system. Moreover, although the H2_2-formation efficiency implemented in the kinetic rate equation formalism is based on surface-model studies parameterized for a wide range of astrophysical conditions following Cazaux & Tielens [13, 14], it does not consider a grain surface network where many reactions compete for atomic H, as is the case in our KMC simulations. This becomes important at higher densities where the fluxes of O, CO, and N onto the grain is of similar magnitude as atomic H. Here a significant fraction of the H landing onto the grain gets locked up in species such as H2_2O, CH4_4, and CH3_3OH and also the routes for H2_2 formation change from H + H →\rightarrow H2_2 to H2_2 abstraction reactions (Simons et al. [93]).

In order to alleviate the above-mentioned issues within our model setup, we adopted an iterative strategy where the H2_2 formation efficiency employed in UCLCHEM for the kinetic rate equation treatment was reparametrized using H2_2 formation data from the KMC calculations. The new gas-phase data obtained in this way was then used again to rerun the KMC simulations. See Appendix A for the details and implications of using the adjusted versus the default UCLCHEM H2_2-formation efficiency. We note that in the most recent version of UCLCHEM (≥4.0\geq4.0) double formation of H2_2 has been addressed using a temperature-dependent switch between the two formalisms.

As KMC simulations can quickly become computationally expensive, we have kept the selection of transferred gas-phase abundances to a minimum, i.e., to atomic and molecular species that represent the main reservoirs of the elements H, C, O, and N in the gas phase and/or are directly involved in the formation of the main ice components and ammonium salts: H, CO, O, C, N, H2_2, O2_2, and N2_2. The gas-phase chemistry evolves on much longer timescales (of the order of thousands of years) than the grain-surface chemistry considered in the KMC simulations (ranging from microseconds to days). Accordingly, the gas abundances, densities, and photon fluxes are passed from UCLCHEM to the KMC program at intervals of 1000 years. Between these updates, the KMC simulations evolve using a variable timestep, explicitly resolving the faster grain-surface processes.

The grain surface is represented by a 50×5050 \times50 lattice with periodic boundary conditions, onto which species can accrete and form layers. Spherical grains with a radius of 0.1 μm0.1~\mu\mathrm{m} and a site density of 1015 cm−210^{15}~\mathrm{cm}^{-2} are assumed. Desorption and diffusive hopping are treated as thermally-activated Arrhenius-type processes, with activation energies being site-specific and determined by the binding energies of the species and their interactions with neighbouring particles. See Cuppen & Herbst [18] for a detailed account of the calculation of the rate coefficients for these processes, where we have used a factor 0.4 instead of 0.5 for the ratio between diffusion and binding energy. The non-thermal processes included are chemical (reactive) desorption and dissociation, the latter being caused either through direct ultraviolet- or cosmic-ray induced photon radiation. Equations for the corresponding rate coefficients can be found in Cuppen & Herbst [18]; Simons et al. [93].

Physical and Chemical Parameters

In our simulations of ice chemistry, we consider the evolution of a typical molecular cloud from its diffuse to dense stage. Our setup is closely aligned with that of Jiménez-Serra et al. [54] and we consider the model of J110621 as a reference and example of a typical dense cloud. It is constructed as follows. We start with a “Phase 0” (UCLCHEM only), modeling the cloud as a static diffuse cloud with a H nuclei density of nH=2×103 cm−3n_{\mathrm{H}} = 2 \times10^{3}\ \mathrm{cm}^{-3}, gas and dust temperature of 15 K and a visual extinction of AV=1.5A_{\mathrm{V}} = 1.5 mag. In the next phase, “Phase 1”, the cloud collapse is simulated by increasing the density (nHn_{\mathrm{H}}) towards a final density, here set to nH=2×105 cm−3n_{\mathrm{H}} = 2 \times10^{5}\ \mathrm{cm}^{-3}. The collapse follows the free-fall treatment ([11, 84, 43]), and is engineered to span a duration of tcollapse=105t_{\mathrm{collapse}} = 10^{5} yr. Correspondingly, we let the visual extinction increase with density towards a set final value of AV=47A_{\mathrm{V}} = 47 mag ([55, 9, 31])

AV=AV0+nH×rout1.6×1021,(3)A_{\mathrm{V}} = A_{\mathrm{V0}} + \frac{n_{\mathrm{H}} \times r_{\mathrm{out}}}{1.6 \times10^{21}}, \tag*{(3)}

where AV0A_{\mathrm{V0}} is the initial value for the extinction (1.5 mag) and routr_{\mathrm{out}} is the radius of the cloud. Finally, “Phase 2” is simulated; a static period of 2×1042 \times10^{4} yr under the same dense cloud conditions reached at the end of the collapse. For phase 0, we have only obtained gas-phase abundances, whereas for phases 1 and 2, both gas-phase (using UCLCHEM) and grain-surface abundances (with the KMC program) are obtained. A schematic overview of our modeling setup is provided in Appendix § 6 and Table 1 reports the relevant parameter values used for our reference model. Please note that the temperature remains constant throughout the simulation.

ParameterPhase 0 staticPhase 1 collapsePhase 2 static
nC/nHan_{\mathrm{C}}/n_{\mathrm{H}}^{a}2.23×10−42.23 \times10^{-4}2.23×10−42.23 \times10^{-4}2.23×10−42.23 \times10^{-4}
nO/nHan_{\mathrm{O}}/n_{\mathrm{H}}^{a}5.62×10−45.62 \times10^{-4}5.62×10−45.62 \times10^{-4}5.62×10−45.62 \times10^{-4}
nN/nHan_{\mathrm{N}}/n_{\mathrm{H}}^{a}6.18×10−56.18 \times10^{-5}6.18×10−56.18 \times10^{-5}6.18×10−56.18 \times10^{-5}
ζ\zeta [s−1^{-1}]5.2×10−175.2 \times10^{-17}5.2×10−175.2 \times10^{-17}5.2×10−175.2 \times10^{-17}
tdurationt_{\mathrm{duration}} [yr]10610^{6}10510^{5}2×1042 \times10^{4}
nHn_{\mathrm{H}} [cm−3^{-3}]2×1032 \times10^{3}2×1052 \times10^{5}b{}^{b}2×1052 \times10^{5}
TT [K]151010
AVA_{\mathrm{V}} [mag]1.547b{}^{b}47

Table 1. Parameter values for the reference model. Notes. a{}^{a} Elemental abundances set from Jenkins [52], minimally depleted case, F∗=0F_{*}=0. b{}^{b} Value at the end of the phase.

The cosmic-ray ionization rate, here denoted by ζ\zeta, is set to 5.2×10−17 s−15.2 \times10^{-17}\ \mathrm{s}^{-1}, consistent with estimates based on H3+\mathrm{H}_{3}^{+} observations ([22, 74]). This value is around four times higher than the canonical value of 1.3×10−17 s−11.3 \times10^{-17}\ \mathrm{s}^{-1}—commonly used in astrochemical codes. The elemental abundances of C, O, and N can also have a strong effect on the final ice composition in our simulations. Since these are provided as initial gas abundances in phase 0, i.e., a young diffuse cloud, we have chosen to use abundances corresponding to minimal depletion as determined by Jenkins [52] (F∗=0F_{*}=0 case). The elemental abundances of C, O, and N are listed in Table 1.

In § 3.3, we investigate variations in some of the key parameters listed in Table 1 and discuss the resulting changes relative to the reference model. The effects of varying ζ\zeta, including adopting the canonical value, are explored in Sect. 3.3.1. Other choices of elemental abundances are discussed in Sect. 3.3.3. Finally, the effects of adopting longer collapse times (tcollapset_{\mathrm{collapse}}) and higher final densities (nHn_{\mathrm{H}}) are examined in Sect. 3.3.2.

Reaction network

The used reaction network builds on previously established grain-surface reaction schemes, with reaction pathways confirmed by laboratory experiments or quantum mechanical calculations. It combines the water formation network ([59]), the CO hydrogenation network ([93]), and the glycine formation network ([48]) used in earlier studies. We have extended the network to include the formation of NH4+HCOO−\mathrm{NH}_{4}^{+}\mathrm{HCOO}^{-} and NH4+OCN−\mathrm{NH}_{4}^{+}\mathrm{OCN}^{-} through thermal acid–base reactions (1) and (2), respectively. In addition, we include acid formation reactions, CO oxidation pathways involving the intermediate HOCO, and other CO2\mathrm{CO}_{2} formation pathways through O-atom addition. An overview of all newly-added reactions is shown in Table B.1.

Reaction (1) was experimentally shown to be feasible under cold interstellar ice conditions ([7]). We adopt the measured rate constant, which follows an Arrhenius expression with an activation barrier of 70 K and a pre-exponential factor of 1.4×10−3 s−11.4 \times10^{-3}\ \mathrm{s}^{-1}. Similarly, the rate for reaction (2) is adopted from Mispelaer et al. [65] (barrier of 48 K, pre-exponential factor of 3.5×10−3 s−13.5 \times10^{-3}\ \mathrm{s}^{-1}). For both acid-base reactions, the kinetics were found to be described by two distinct processes: a relatively slow process attributed to the movement of the reactants, involving diffusion and/or changes in their relative orientation, and a fast process corresponding to the chemical reaction itself ([7, 65]). We adopt only the “pure” chemical reaction rate constants of the latter process from these studies, as diffusion and the resulting meeting rate between reactants are explicitly treated in the KMC model. The reaction rate constant is thus applied whenever the acid and base occupy neighboring lattice sites.

The role of the HOCO radical is central to the different model variations discussed in this work. Traditionally, astrochemical models have attributed CO2\mathrm{CO}_{2} formation primarily to the direct reaction:

CO + OH →\rightarrow CO2_{2} + H. (4)

This is supported by several laboratory studies ([71, 49, 68]) and is the basis for our variation, Model B. However, quantum-mechanical ([39, 66]), molecular dynamics ([4]), and recent experimental work ([80, 51]) suggest that HOCO can be stabilized in the ice, leading to CO2_{2} via a two-step process:

CO + OH →\rightarrow HOCO (5)

HOCO + H →\rightarrow CO2_{2} + H2_{2}. (6)

In our canonical model (Model A), we adopt this mediated pathway. We also include the competing H-addition channel:

HOCO + H →\rightarrow HCOOH. (7)

Due to a lack of quantitative branching ratios, we assume equal branching among the three possible outcomes of the HOCO + H reaction (forming CO2_{2}, HCOOH, or CO + H2_{2}O). The rate for reaction (5) is adopted from the H2_{2}O-ice calculations of Molpeceres et al. [66], using a value of approximately 101010^{10} s−1s^{-1}. For consistency in comparing Model A and Model B (see Sect. 3.2.1), the same rate constant is used for reaction (4) as for reaction (5).

The formation of formic acid (HCOOH) is treated via three pathways. First, we include the radical-radical reaction HCO + CO ([45, 6]) and a competing channel HCO + OH →\rightarrow CO + H2_2O with an equal branching ratio ([24]). Second, we include the barrierless reaction CH2_2OH + O →\rightarrow HCOOH + H, alongside an alternative channel to H2_2CO + OH with equal branching ratio, as excess thermal energy may cause well-skipping in this product ([91]). Third, we include the hydrogenation of the hydrocarboxyl radical (HOCO), which laboratory studies suggest is a primary route to HCOOH without external energetic processing ([47]).

Finally, we consider the reaction of HOCO with nitrogen atoms to enable the formation of HNCO:

HOCO+N→HOCON,(4)\mathrm{HOCO} + \mathrm{N} \rightarrow\mathrm{HOCON}, \tag*{(4)}

followed by a series of barrierless hydrogenation reactions (see Table B.1). In Sect. 3.2.2, we compare this route to an alternative direct pathway

CO+NH→HNCO,(5)\mathrm{CO} + \mathrm{NH} \rightarrow\mathrm{HNCO}, \tag*{(5)}

which is omitted from our standard models due to the large uncertainties in its rate coefficient.

Destruction pathways for the two ammonium salts are not included in the reaction network due to lack of experimentally constrained dissociation rates and the uncertain nature of their destruction under interstellar conditions. While direct photodissociation is expected to be inefficient given the stable ionic nature of these salts, energetic-particle processing may induce destruction through ionization-driven processes, as briefly discussed in Sect. 3.4. Dissociation reactions for all other species are included and rates are taken where available from Heays et al. [41]. Otherwise, canonical values are used.

With the UCLCHEM simulations we have used the gas-phase chemical network from the UMIST 2012 database (McElroy et al. [64]) and the default grain network (based on Quénard et al. [81]).

Results and discussion

Ice evolution

The time-dependent cloud parameters provided to the KMC grain-surface simulation consist of the gas-phase abundances, cloud density, and visual extinction calculated with UCLCHEM. A selection of the gas abundances, together with the cloud density and visual extinction during Phase 1 and 2 of the simulation is shown in panels (a), (c) and (d) of Figure 1 respectively. Panel (b) shows the time evolution of abundances of several ice species resulting from the KMC simulation. The corresponding growth of the ice mantle in terms of the number of monolayers is shown in panel (e). Here, and throughout the remainder of this work, time is reset to t=0t = 0 at the beginning of Phase 1 and tcollapset_{\mathrm{collapse}} denotes the end of Phase 1 (start of Phase 2); the Phase-0 evolution is not shown.

Figure 1. Time evolution of selected gas-phase (a) and grain-surface (b) species abundances during collapse and dense cloud conditions (Phase 1 and 2). The corresponding evolution of the cloud density (c), visual extinction (d), and number of ice monolayers (e) is shown in the lower-left panels. Side cross-sections of the ice mantles are shown in panel (f), at the end of Phase 1 (left), before severe CO freeze-out; and at the end of Phase 2 (right), after CO freeze-out. Each pixel represents an atom or molecule of a given species, as indicated by the legend. Gas-phase chemistry and cloud evolution (density and visual extinction) are modeled with UCLCHEM, from which gas abundances, density and visual extinction are provided to the KMC program simulating the grain-surface ice chemistry. KMC abundance profiles and the number of ice layers show mean and standard deviation (shaded area) based on 4 independent runs.

The cloud collapse model results in a rapid increase in density towards the end of Phase 1 (t≳7×104t \gtrsim7 \times10^{4} yr), until dense cloud conditions are reached at tcollapse=105t_{\mathrm{collapse}} = 10^{5} yr. In the subsequent Phase 2, the density remains constant at nH=2×105n_{\mathrm{H}} = 2 \times10^{5} cm−3^{-3} and the ice mantle continues to grow significantly. The ice thickness roughly doubles in size from ∼30\sim30 to ∼60\sim60 monolayers within a span of 20,000 years after tcollapset_{\mathrm{collapse}}, driven by the increase in accretion flux and enhanced retention of species on the grain at high density and visual extinction.

The grain-surface abundances follow the canonical ice evolution scenario (Öberg et al. [72]), where ice formation is broadly divided into two stages that occur before and after significant depletion of CO from the gas phase while freezing out onto the grain. Prior to CO freeze-out, a water-rich ice mantle (polar ice) forms through the efficient hydrogenation of atoms and simple molecules, leading to the formation of hydrides such as H2_2O and NH3_3. This stage is followed by the formation of a CO-rich ice (apolar ice), dominated by CO2_2 in addition to frozen CO. In our model, the collapse time, tcollapse=105t_{\mathrm{collapse}} = 10^{5} yr, approximately marks the transition between these two regimes: during Phase 1 we observe steady production of H2_2O and NH3_3, whereas in Phase 2 the abundances of these hydrides level off while the CO2_2 abundance increases rapidly. In our model, the onset of significant CO freeze-out in Phase 2 is accompanied by a decrease in the gas-phase abundance of atomic H, reducing its availability for grain-surface chemistry and limiting the continued hydrogenation of accreted species. This contributes to the leveling off of the H2_2O and NH3_3 abundances.

Panel (f) of Figure 1 shows two cross-sections of the ice mantle, the left is at the end of Phase 1 and the right at the end of Phase 2. These cross-sections confirm the formation of two ice fractions: a polar layer dominated by blue representing H2_2O and an apolar layer dominated by orange and teal, representing CO and CO2_2 respectively. In both images, the ice mantle is covered by a single H2_2 layer. Molecular hydrogen does not accumulate because the binding energy of H2_2 to itself is too low to support multilayer growth (see, e.g., [60, 18]), a feature that is explicitly accounted for in our KMC model.

We find that NH4+_4^+ salts predominantly form during the early stage of ice formation (Phase 1) and that their production is limited by the availability of NH3_3. Beyond tcollapset_{\mathrm{collapse}}, the abundance of NH4+_4^+ increases only slightly following the cessation of NH3_3 production. In contrast, the formation of formic acid (HCOOH) continues well into Phase 2, while the abundance of cyanic acid (HNCO) only reaches appreciable levels during this later stage. The main formation channel for both acids is linked to the CO-to-CO2_2 conversion chemistry through HOCO (see § 3.2.1), leading to enhanced production with increasing levels of CO abundance on the grain. This effect, combined with the reduced availability of NH3_3 for salt formation, leads to a significant increase in the abundances of both acids, especially at the interface between the two ice phases as can be seen in panel (f). Zooming in on the salt complexes, NH4+_4^+HCOO−^- (magenta pixels) is found to be present throughout the H2_2O-ice together with NH3_3. The NH4+_4^+OCN−^- complexes (gold pixels) are confined to upper layers of the H2_2O-dominated ice, consistent with the delayed production of HNCO. The near absence of NH4+_4^+ salts in the upper half of the ice is due to the absence of NH3_3 in this layer. In the following, we will refer to the model studied above as Model A, which we regard as our baseline model. In the next sections, we consider variations of Model A in which individual changes are made to the reaction network (Sect. 3.2) or to the input chemical and physical parameters (Sect. 3.3).

Changes to the chemical reaction network

Effect of inclusion of HOCO in the CO2 reaction network

In our main model, Model A, we have adopted the HOCO-mediated CO2 formation pathway and the associated HOCO reaction pathways. Here we investigate the effect of this HOCO-mediated treatment on the production of ammonium salts (NH4+HCOO−\mathrm{NH_4^+HCOO^-} and NH4+OCN−\mathrm{NH_4^+OCN^-}) and on the overall ice composition by comparing Model A with Model B, in which HOCO is omitted from the reaction network and CO2 is formed through the direct pathway of reaction (4). A comparison between the two models is presented in Figure 2.

Figure 2. Comparison between Model A, which includes the HOCO radical, and Model B, in which CO2_2 is formed directly from CO + OH. The top panels show the reaction network fluxes of the CO2_2 and NH4+_4^+ salt formation network (a), the ice cross-section at the end of Phase 2 (b), and the abundance profiles (c) for Model A, while the corresponding results for Model B are shown in the bottom panels (d-f). In the reaction network flux diagrams, the thickness of the arrows indicates the relative frequency of the reaction, and only reactions contributing more than 2% to the formation of a species are shown. The abundance profiles show the mean and standard deviation (shaded area) based on four independent runs.

The reaction fluxes shown in Figure 2a illustrate how the CO2 formation flux connects, through HOCO, to the formation pathways of NH4+HCOO−\mathrm{NH_4^+HCOO^-} and NH4+OCN−\mathrm{NH_4^+OCN^-}. The hydrogen-addition reaction leading to CO2 (reaction (6)) competes with the other two channels, leading to H2O and HCOOH. Upon encounter with atomic H, the dominant reaction pathway likely depends on the relative orientation of H and HOCO. We adopt equal branching ratios between the three pathways, assuming no preferential orientation (see Table B.1). This results in approximately equal formation rates of H2O, CO2, and HCOOH from HOCO. In addition, HOCO can react with atomic nitrogen to form the intermediate HOCON, which can subsequently lead to the formation of the acid HNCO. Both HCOOH and HNCO can react with NH3 in the ice through the acid–base reactions (1) and (2).

In contrast, in Model B, the CO2 formation network is disconnected from the salt-production network, as illustrated in Figure 2d. The formation of NH4+HCOO−\mathrm{NH_4^+HCOO^-} proceeds through alternative pathways involving the methanol-formation network (via CH2OH) and radical chemistry through HCO, largely independent of CO2 formation, which occurs directly via CO + OH. No alternative route to the HOCO/HOCON pathway for the formation of HNCO is included, and consequently no OCN−\mathrm{OCN^-} is produced in this model without HOCO.

Figures 2b and 2e show a comparison between Models A and B in terms of their ice cross-sections, while the abundance profiles of ice species throughout Phases 1 and 2 are compared in Figure 2c and Figure 2f. Both models produce a CO-rich ice layer on top of a H2O-dominated ice. The primary effect of including HOCO is a redistribution of the products of CO oxidation from CO2 towards HCOOH, with a corresponding increase in NH4+HCOO−\mathrm{NH_4^+HCOO^-}. This is evident from the increased presence of these species in the ice cross-sections and their higher final abundances. The HOCO-including model yields an approximately sixfold increase in the final relative abundance of HCOOH ([HCOOH] ∼9.5×10−6\sim9.5 \times10^{-6} for Model A versus ∼1.6×10−6\sim1.6 \times10^{-6} for Model B) and a slightly more than twofold increase in NH4+HCOO−\mathrm{NH_4^+HCOO^-} ([NH4+HCOO−] ∼4.8×10−6\sim4.8 \times10^{-6} for Model A versus ∼2.7×10−6\sim2.7 \times10^{-6} for Model B). Furthermore, in Model A, HOCO is concentrated primarily in the upper ice layers, similar to HCOOH. This reflects the reduced availability of NH3 for salt formation together with the relatively short duration of the CO-rich Phase 2, leaving species such as HCOOH and HOCO less efficiently converted.

The time evolution of the abundances of CO, CH3OH, and CH4 is largely unaffected by the inclusion of HOCO, as their abundance profiles are nearly identical in Models A and B. The similar CO abundance is expected because CO is consumed efficiently in both models: in Model A, a fraction of CO reacts with OH to form HOCO, whereas in Model B the same reaction is treated as direct CO2 formation. Since the abundances of CH3OH and CH4 are largely determined by the hydrogenation of CO and its hydrogenated intermediates, their abundance, in turn, also remains the same in both models. In contrast, the abundance of NH3 is strongly influenced: Model B exhibits a final NH3 abundance approximately twice that of Model A, whereas the NH4+\mathrm{NH_4^+} abundance is correspondingly lower. As discussed above, HOCO enhances the formation of acid species, leading to a decrease in NH3 as it reacts to form NH4+\mathrm{NH_4^+} salts.

We recommend using a reaction network where CO2 is formed through HOCO instead of the direct CO + OH reaction, since this is consistent with several studies as indicated earlier

([39, 66, 4, 80, 51]). Moreover, it results in a more realistic H2_2O:CO2_2 ratio: in Model A, H2_2O remains the most abundant ice species throughout phases 1 and 2, whereas the more efficient conversion of CO to CO2_2 in Model B leads to a final CO2_2 abundance that exceeds that of H2_2O.

Finally, we note that reaction (5) is assigned a fixed rate coefficient based on calculations for a H2_2O-rich ice environment ([66]). This rate constant was found to vary substantially with the assumed ice matrix; a substantially higher rate coefficient was obtained when the reaction was modeled in a H2_2O cluster than in a CO cluster because water ice is much more efficient in dissipating excess energy ([66]). Unfortunately, our model does not accommodate this change in rate coefficient because of change in local environment (yet) and a single value is set for the entire simulation. The rate coefficient used in Model A is more relevant for Phase 1 (t<tcollapset < t_{\mathrm{collapse}}), when the bulk of the water ice is formed. During Phase 2 (tcollapse<tt_{\mathrm{collapse}} < t), when the CO-rich ice layer emerges, the formation of HOCO and species formed from HOCO are likely overestimated. Indeed, we see that if we run the Model-A network using the rate coefficient relevant for a CO environment ([66]) for the entire run that HCOOH and CO2_2 become less abundant, especially in Phase 2.

The formation of NH4+_4^+ salts is likely largely unaffected by the switch in rate constant as these species form primarily during the early, water-rich stage. Moreover, their formation is limited by the availability of NH3_3. We found that the abundance of NH4+_4^+ remained very similar for the two Model-A networks with different rate coefficients; n(NH4+)/nHn(\mathrm{NH}_4^+)/n_{\mathrm{H}} values of ∼5×10−6\sim5 \times10^{-6} and

∼4×10−6\sim4 \times10^{-6} were observed at the end of Phase 2 for the H2_2O-ice and CO-ice rate constants, respectively.

Inclusion of reaction CO + NH →\rightarrow HNCO

Model A includes only one formation pathway for HNCO, namely reaction (4). Here, we compare Model A with a model that additionally includes the direct reaction between CO and the NH radical, i.e., reaction (5). We refer to this modified model as Model C.

Quantum chemical calculations, combined with experiments on HNCO formation in 12 K Ar matrices ([42]), suggest an activation energy of 4210 K for reaction (5), rendering it negligible at temperatures of 10 K. However, another experimental study aimed at reproducing astrochemically relevant conditions identified reaction (5) as the dominant formation pathway for HNCO, compared to related reactions such as NH2_2 + CO →\rightarrow HNCO + H and H + NCO →\rightarrow HNCO ([27]). The rate coefficient for reaction (5) remains uncertain. Nevertheless Fedoseev et al. suggested that the rate of H + CO →\rightarrow HCO provides an upper limit, since no H2_2CO formation was detected in their experiments. Following the energy barriers reported by Fuchs et al. [32] for H + CO →\rightarrow HCO, we use a rate of 2×10−52 \times10^{-5} s−1^{-1} (corresponding to an energy barrier of ∼375\sim375 K) for reaction (5).

A comparison of the ice abundance profiles during phases 1 and 2 of cloud evolution for a selection of species relevant to NH4+_4^+ salt formation is presented in Figure 3. As expected, the inclusion of reaction (5) leads to an increase in the solid HNCO abundance. Whereas for Model A, the HNCO fractional abundance remains low (∼10−9\sim10^{-9}) during the early stage of ice evoolution (t<80000t < 80000 yr), Model C yields an HNCO abundance already of the order of 10−810^{-8} through much of that time period. In Phase 2, the HNCO abundance increases to values comparable to those of NH4+ (4×10−64 \times10^{-6}), while for Model A, the abundance reaches values comparable to that of NH3.

Figure 3. Abundance profiles during Phases 1 and 2 of cloud evolution for selected species relevant to NH4+ salt formation are shown for Models A and C. The latter model includes reaction (9) and exhibits enhanced HNCO formation, with atomic N being diverted from NH3 and NH4+ towards HNCO. The inset compares the abundance fraction of the two NH4+X− salts (X=HCOO− or OCN−) relative to the total NH4+ abundance as a function of time between the two models.

In both models, peak production of HNCO occurs near the end of Phase 1/start of Phase 2, corresponding to the onset of CO freeze-out. At this stage, CO becomes increasingly abundant, while hydrogenation of N towards NH also remains efficient. The NH radical can either react with H to form NH3 or with CO to form HNCO. With the rapid change in relative gas-phase abundance n(H)/n(CO)n(\mathrm{H})/n(\mathrm{CO}), the relative ice abundance of NH3 and HNCO also moves towards a preference of HNCO towards late times. The lower abundances of NH3 and NH4+ observed during Phase 2 in Model C compared with Model A can therefore be attributed to the allocation of nitrogen towards HNCO. Concurrently, the HCOOH abundance is nearly identical for both models. Thus, we can conclude that the CO-based chemistry involving HOCO which forms HCOOH is largely unaffected by the inclusion of reaction (5).

Finally, although the absolute abundance of NH4+ decreases slightly in Model C, the dominant effect is a redistribution of the NH4+ salts among the counterions HCOO− and OCN−. The inset of Figure 3 shows the fraction of the two NH4+X− species abundance relative to the total NH4+ abundance as a function of time. In Model A, ammonium cyanate accounts for ∼2\sim2–5%5\% of the total NH4+ salt abundance, whereas in Model C the NH4+ salt population is partitioned approximately 20:8020:80 between ammonium cyanate and ammonium formate. Hence, we conclude that the inclusion of reaction (5) leads to a significant increase in OCN− formation.

Variation of physical parameters

Effect of the cosmic-ray ionization rate

Cosmic rays are a fundamental source of ionization within the interstellar medium (ISM), influencing both the gas-phase and grain-surface chemistry in molecular clouds. The magnitude of the cosmic-ray ionization rate (CRIR) has remained uncertain for more than half a century. Directly estimated from the primary ionization rate of H2, namely, ζ\zeta, this rate has been found to vary with the physical environment, ranging from values of the order of 10−1810^{-18} s−1 in well-shielded dense regions to ∼10−15\sim10^{-15} s−1 in diffuse clouds [95, 22, 46, 75]. In addition, inferred values depend on the observational tracer and detection method used. A recent JWST detection of cosmic-ray-excited rovibrational H2 emission yielded ζ=1.7×10−16\zeta= 1.7 \times10^{-16} s−1 [8], whereas the canonical value adopted in many astrochemical models of dense clouds is 1.3×10−171.3 \times10^{-17} s−1 (see, e.g., Garrod 2013; Holdship et al. 2017; Iqbal & Wakelam 2018; Jiménez-Serra et al. 2025).

In our reference model, Model A, we adopt ζA=5.2×10−17\zeta_{\mathrm{A}} = 5.2 \times10^{-17} s−1, following the estimates of [22, 74]. This value is four times the canonical dense-cloud value and remains well within the range inferred for dense molecular clouds. To investigate the sensitivity of grain-surface chemistry, and in particular the formation of NH4+ salts, to the cosmic-ray ionization rate, we additionally consider two models with lower and higher ionization rates: Model D1 with 14ζA=1.3×10−17\frac{1}{4}\zeta_{\mathrm{A}} = 1.3 \times10^{-17} s−1 and Model D2 with 2ζA=1.04×10−162\zeta_{\mathrm{A}} = 1.04 \times10^{-16} s−1.

We identify two principal effects of varying the CRIR on the formation of NH4+ salts. The first is an increase in the production of atomic hydrogen. In our models, atomic H is produced in the gas phase through cosmic-ray ionization of H2 and subsequent ion-molecule chemistry, as computed by UCLCHEM. An increase in ζ\zeta therefore results in a larger flux of atomic H onto the grain surface, enhancing the hydrogenation of surface species. Most importantly, this leads to an increased production of NH3, which enables the acid-base chemistry responsible for the formation of NH4+.

The second effect is the enhanced photodissociation of ice species through the increased flux of cosmic-ray-induced UV photons. The photodissociation rates of the salts NH4+HCOO− and NH4+OCN−, however, remain unknown and are therefore not included in the present model. Moreover, salts are expected to be relatively resistant to UV-induced dissociation because of the strong electrostatic interaction between their constituent ions. This is further discussed in Section 3.4.

For Model A, the gas-phase abundance of atomic H is approximately 1.5×10−31.5 \times10^{-3} cm−3 throughout Phase 1 of the cloud evolution (see Sect. 3.1, Figure 1a). Relative to Model A, Model D2 exhibits an increase of approximately 30% in the atomic H abundance, whereas Model D1 shows a decrease of approximately 40%. Similar increases and decreases are observed in the ice abundances of both NH3 and NH4+, as shown in Figure 4a where the time evolution of the sum, n(NH3)+n(NH4+)n(\mathrm{NH}_{3}) + n(\mathrm{NH}_{4}^{+}), is plotted for each model. As shown in the inset, the fraction n(NH4+)/(n(NH3)+n(NH4+))n(\mathrm{NH}_{4}^{+})/(n(\mathrm{NH}_{3}) + n(\mathrm{NH}_{4}^{+})) decreases with increasing ζ\zeta, particularly during Phase 2. This indicates that the enhanced production of NH3 outpaces its conversion into NH4+, resulting in a larger reservoir of unreacted ammonia. Furthermore, these results demonstrate that, within our models, the CRIR effectively regulates the supply of atomic H available for hydrogenation of species on the grain. Because the formation of NH4+ salts is limited by the availability of NH3 (Sect. 3.1), increasing ζ\zeta enhances the production of NH3 and subsequently the abundance of NH4+.

Figure 4. Comparison between models with different cosmic-ray ionization rates, ζ\zeta, showing the total ammonia and formic acid reservoirs, n(NH3)+n(NH4+)n(\mathrm{NH}_3) + n(\mathrm{NH}_4^+) and n(HCOOH)+n(HCOO−)n(\mathrm{HCOOH}) + n(\mathrm{HCOO^-}) respectively, during Phases 1 and 2 of the cloud evolution (panel a). The inset shows the ratio n(NH4+)/(n(NH3)+n(NH4+))n(\mathrm{NH}_4^+) / (n(\mathrm{NH}_3) + n(\mathrm{NH}_4^+)). The net cumulative production of NH3\mathrm{NH}_3 (panel b) and the averaged binned frequencies of NH3\mathrm{NH}_3 formation and dissociation events (panel c) over the corresponding time period are also shown.

In contrast, varying the CRIR has little influence on CO-based chemistry or the formation of HCOOH via the HOCO intermediate. Instead, increasing ζ\zeta promotes the consumption of HCOOH to form NH4+HCOO−. As shown by the nearly constant total abundance of n(HCOOH)+n(HCOO−)n(\mathrm{HCOOH}) + n(\mathrm{HCOO^-}) in Figure 4a, the CRIR primarily redistributes carbon and oxygen between the neutral acid and its ammonium salt rather than altering the overall HCOOH budget.

Although a higher CRIR enhances the photodissociation of ice species, it paradoxically leads to a substantial increase in NH3\mathrm{NH}_3 abundance. This indicates that enhanced production, driven by increased atomic H abundance, outweighs the accompanying increase in photodissociation. This competition is illustrated in panels b and c of Figure 4, where the net cumulative production of NH3\mathrm{NH}_3 – defined as the difference between formation via NH2+H→NH3\mathrm{NH}_2 + \mathrm{H} \to\mathrm{NH}_3 and total photodissociation – increases with ζ\zeta throughout both phases of cloud evolution. Binned frequency analysis (Figure 4c) confirms that while a higher ζ\zeta increases the NH3\mathrm{NH}_3 photodissociation, it more significantly enhances the formation rate due to the increased availability of surface atomic H. Since formation exceeds dissociation across all models – and this gap widens during late-stage cloud collapse (8.0×104 yr<t<tcollapse8.0 \times10^4\ \mathrm{yr} < t < t_{\mathrm{collapse}}) – increased CRIR increases the NH3\mathrm{NH}_3 reservoir, ultimately facilitating more efficient NH4+\mathrm{NH}_4^+ salt formation.

Collapse time and final cloud density

In our main model, Model A, it is assumed that the molecular cloud collapses during Phase 1 from an initial hydrogen nuclei density of nH=2×103 cm−3n_{\mathrm{H}} = 2 \times10^3\ \mathrm{cm}^{-3} to a final density of nH=2×105 cm−3n_{\mathrm{H}} = 2 \times10^5\ \mathrm{cm}^{-3} over a timescale of tcollapse=105 yrt_{\mathrm{collapse}} = 10^5\ \mathrm{yr}. The adopted collapse time is shorter than typically expected for the physical evolution of molecular clouds and may influence the grain-surface chemistry and the resulting ice composition. Using the parameterized collapse formalism of Rawlings et al. [84], the default retardation factor yields a collapse time of the order of 1 Myr for the diffuse-to-dense cloud evolution considered here. To assess the effect of the adopted cloud evolution on the grain-surface chemistry, and in particular the influence of a slower collapse on NH4+\mathrm{NH}_4^+ salt formation, we compare Model A with two models, Model E1 and E2, representing slower collapse. Model E1 adopts a collapse time of 10610^6 years while retaining the same final density of 2×105 cm−32 \times10^5\ \mathrm{cm}^{-3}. Model E2 adopts the same collapse time but reaches a lower final density of 2×104 cm−32 \times10^4\ \mathrm{cm}^{-3}. For both Models E1 and E2 the timespan of Phase 2 is set to 10510^5 years.

A selection of the resulting gas-phase and grain-surface abundance profiles is presented in the top panels of Figure 5, ordered from the most rapid to the slowest cloud evolution (Models A, E1, and E2). In the slower-collapse models, the freeze-out of gas species occurs more gradually, over several hundred thousand years rather than the tens of thousands of years in Model A. Although significant CO freeze-out occurs later in absolute time in Models E1 and E2, it begins at an earlier stage of the density evolution, i.e., at a lower cloud density. While the onset of significant CO freeze-out coincides with the start of Phase 2 in Model A, a comparable level of CO freeze-out is reached earlier relative to the collapse timescale in Models E1 and E2, at approximately 0.9×tcollapse=0.9×106 yr0.9 \times t_{\mathrm{collapse}} = 0.9 \times10^6\ \mathrm{yr}, indicated by tfreezet_{\mathrm{freeze}} in Figure 5. The transition between a H2O\mathrm{H}_2\mathrm{O}- and a CO-rich ice is therefore roughly demarcated by tfreezet_{\mathrm{freeze}}, although in Models E1 and E2 this transition is much less abrupt and less well-defined. In both models, the gas-phase atomic H abundance stays comparable to the gas-phase CO abundance; consequently hydrogenation reactions, in particular H2O\mathrm{H}_2\mathrm{O} formation, continue as CO increasingly dominates the ice composition. Meanwhile, the CO depletion found in Phase 2 of Model E1 is extensive, but consistent with predictions from other astrochemical model simulations for similar timescale and density Jiménez-Serra et al. [54]. In Model E2, the longer timescale is compensated by the lower final density, resulting in a level of CO depletion comparable to that of Model A instead of Model E1.

Figure 5. Comparison between models with different collapse times and final density, ordered from left to right according to increasingly slower cloud evolution. Values of the collapse timescale and final density that differ from those of Model A are highlighted in red. Top panels: selection of gas-phase (dashed) and grain-surface (solid) abundance profiles for Models A, E1, and E2. Compared to Model A, the slower collapse in Models E1 and E2 results in a more gradual freeze-out of CO and a less rapid decline in the gas abundance of atomic H. Bottom panels: fraction of NH4+_4^+ with respect to the total ammonia reservoir (NH3_3 + NH4+_4^+) and the abundance of the total ammonia reservoir relative to H2_2O over the corresponding time period.

Compared to Model A, the formation of salt precursors is more gradual in the slower-collapse models and both NH4+HCOO−\mathrm{NH}_4^+\mathrm{HCOO^-} and NH4+OCN−\mathrm{NH}_4^+\mathrm{OCN^-} are formed efficiently in Models E1 and E2; by t=0.4×tcollapset = 0.4 \times t_{\mathrm{collapse}}, these salts reach abundances that Model A only achieves towards the end of its collapse. This efficiency is further evidenced by the higher ratios of NH4+\mathrm{NH}_4^+ relative to the total ammonia reservoir (NH3+NH4+\mathrm{NH}_3 + \mathrm{NH}_4^+) seen in Models E1 and E2 and shown in the bottom panels of Figure 5.

As also shown, at the end of Phase 2, all models have reached a similar NH3+NH4+/H2O\mathrm{NH}_3 + \mathrm{NH}_4^+/\mathrm{H}_2\mathrm{O} ratio. However, while in Model A this ratio is rather constant during the simulation, the slower-collapse models have a clear peak in the ratio of the ammonia reservoir to H2O\mathrm{H}_2\mathrm{O}. This effect is most pronounced for Model E1 around 0.4×1060.4 \times10^6 yr. It appears to coincide with the change in H and CO abundance in the gas phase, but the exact mechanism remains unclear.

Overall, these results indicate that the extended timescales of Models E1 and E2 can partially compensate for lower accretion fluxes, allowing efficient salt formation even at lower densities. However, as no destruction mechanisms for ammonium salts are included in our network, the continued accumulation of these species over longer timescales should be interpreted with caution.

Elemental abundances

In Model A we have opted to use elemental abundances (EA) of Jenkins [52] corresponding to the minimally depleted case. To evaluate how our results depend on the adopted elemental abundances, we also consider two additional models, Models F1 and F2, which both assume higher levels of elemental depletion. As listed in Table 2, Model F1 adopts the maximally depleted abundances of Jenkins [52], while Model F2 adopts the high-metal abundance set (EA2) tabulated by Wakelam & Herbst [100]. Since nitrogen remains minimally depleted, especially in comparison to other elements such as oxygen and carbon, models of stronger depletion exhibit larger elemental N/O and N/C ratios (also shown in Table 2). These ratios can significantly influence the competition between reaction pathways for nitrogen- and oxygen-bearing species.

SpeciesModel Aa^{a}Model F1b^{b}Model F2c^{c}
He0.10.10.09
N6.18×10−56.18 \times10^{-5}6.18×10−56.18 \times10^{-5}7.60×10−57.60 \times10^{-5}
O5.62×10−45.62 \times10^{-4}3.34×10−43.34 \times10^{-4}2.56×10−42.56 \times10^{-4}
C2.23×10−42.23 \times10^{-4}1.77×10−41.77 \times10^{-4}1.20×10−41.20 \times10^{-4}
Si2.44×10−62.44 \times10^{-6}2.98×10−62.98 \times10^{-6}1.70×10−61.70 \times10^{-6}
Fe3.88×10−63.88 \times10^{-6}2.01×10−72.01 \times10^{-7}2.00×10−72.00 \times10^{-7}
Mg2.239×10−52.239 \times10^{-5}2.254×10−62.254 \times10^{-6}2.40×10−62.40 \times10^{-6}
nN/nOn_{\mathrm{N}}/n_{\mathrm{O}}0.110.190.30
nN/nCn_{\mathrm{N}}/n_{\mathrm{C}}0.280.350.63

Table 2. Elemental abundances with respect to nHn_{\mathrm{H}}

The abundance profiles throughout Phases 1 and 2 of the gas-phase atomic nitrogen and oxygen, together with the ice abundances of NH4+_4^+, HCOOH, NH3_3 and H2_2O are shown in Figure 6 for Models A, F1, and F2. These models are ordered according to increasing elemental N/O ratio. While only a modest increase in gas-phase atomic N and a slight decrease in atomic O are observed for Models F1 and F2 compared to Model A, the elemental N/O ratio increases by almost a factor of two and three, respectively. This change has very little effect on the H2_2O abundance and only a minor effect on the NH4+_4^+ abundance. However,

Selection of gas-phase and grain-surface abundance profiles for Models A, F1, and F2

Figure 6. Selection of gas-phase (dashed) and grain-surface (solid) abundance profiles for Models A, F1, and F2, ordered from left to right according to increasing elemental N/O ratio, as indicated in the panel titles. Model A uses elemental abundances representative of very low depletion, while Models F1 and F2 adopt abundance sets corresponding to more strongly depleted conditions.

Notes. a^{a} Minimally depleted case Jenkins [52]. b^{b} Maximally depleted case Jenkins [52]. c^{c} High-metal abundance (EA2) Wakelam & Herbst [100].

it causes a clear transition in the relative abundances of HCOOH and NH3_3. In Model A, the final HCOOH abundance substantially exceeds that of NH3_3, while both species reach comparable abundances in Model F1. In Model F2, NH3_3 becomes much more abundant than HCOOH. This transition is explained by the sensitivity of the HCOOH and NH3_3 formation pathways to the elemental N/O ratio. The pathways leading to these species compete for available atomic H, with increasing N/O favouring nitrogen hydrogenation over the oxygen- and carbon-bearing chemistry involved in HCOOH formation. Because the increased availability of one precursor of NH4+_4^+ (NH3_3) is accompanied by a reduced abundance of the other (HCOOH), the NH4+\mathrm{NH}_4^+ abundance remains robust across the different elemental abundance models considered here.

Sensitivity of NH4+ formation to model variations

Section 3.1 discussed the ice evolution of our main model, Model A, whereas Sects. 3.2 and 3.3 considered different chemical or physical variations of Model A. Here, we synthesise the results from these variations in order to assess how sensitive the formation of NH4+HCOO−\mathrm{NH}_4^+\mathrm{HCOO}^- and NH4+OCN−\mathrm{NH}_4^+\mathrm{OCN}^-, as well as those of the major ice constituents, are to changes in the adopted model assumptions. We only include those models that have the correct two-step CO2\mathrm{CO}_2 formation route via HOCO, i.e., all models except Model B.

An overview of the ice composition of Model A and the different model variations is provided in Figure 7, which shows the fractional abundances relative to water for some of the main ice species (CO, CO2\mathrm{CO}_2, CH3\mathrm{CH}_3OH, and CH4\mathrm{CH}_4), along with NH3\mathrm{NH}_3 and the salt species NH4+\mathrm{NH}_4^+, HCOO−\mathrm{HCOO}^-, and OCN−\mathrm{OCN}^-. For comparison, the observed abundances from McClure et al. [63] towards background star J110621 in the Chamaeleon I cloud – which we regard as representative of a typical molecular-cloud environment and on which the parameter values for Model A were loosely based – are also indicated where available. Assessment of the CO column density indicates that the line of sight towards J110621 probes a source in an early stage of ice evolution, before catastrophic deposition of CO onto the grains has occurred (McClure et al. [63]). We hence indicate the abundances at t=tfreezet = t_{\mathrm{freeze}}.

Figure 7. Comparison of relative abundances of main ice species (top panels), NH3_3, and NH4+_4^+ salts (bottom panels) for Model A, its variations discussed in Sects. 3.2.2–3.3.3, and observations. Abundances are percentages relative to H2_2O, taken at the onset of CO freeze-out, tfreezet_\mathrm{freeze} (discussed in Sect. 3.3.2). Colors indicate Model A (red) and variations: CO + NH →\rightarrow HNCO (blue), cosmic-ray ionization rate (green), slower collapse (orange), and higher-depletion elemental abundances (purple). Grey dashed lines and shaded areas indicate observed values and 3σ3\sigma confidence intervals, respectively, for sightline J110621 from McClure et al. [63] where available.

Figure 7 shows that all models have rather similar ice abundances with respect to H2\mathrm{H}_2O, which are in reasonable agreement with the observed values. The largest deviations from Model A are observed for Models E1 and E2 and Models F1 and F2. Models E1 and E2 exhibit higher abundances of CO and CO2\mathrm{CO}_2 and a much lower abundance of CH4\mathrm{CH}_4, which can be explained by their earlier conversion from C to CO in the gas phase. Models F1 and F2 deviate mostly in N-bearing species, which are more dominant due to the higher N/O ratio in the gas. Finally, OCN−\mathrm{OCN}^- is significantly more important in Model C, because of the inclusion of the reaction CO+NH→HNCO\mathrm{CO} + \mathrm{NH} \rightarrow\mathrm{HNCO}.

Compared to observations, we find an overly efficient conversion of CO to CO2\mathrm{CO}_2 in all our models, which generally results in an underestimation of the abundance of CO and an overestimation of that of CO2\mathrm{CO}_2. Increased production of CO2\mathrm{CO}_2 has also previously been encountered in other astrochemical models (Garrod & Pauly [35]; Clément et al. [16]; Jiménez-Serra et al. [54]), with different underlying mechanisms proposed to explain this behaviour. Although a detailed investigation of these mechanisms falls outside the scope of this work, we note that our KMC model includes CO2\mathrm{CO}_2 formation through the radical HOCO. As discussed in Sect. 3.2.1, formation of CO2\mathrm{CO}_2 through the HOCO intermediate results in more modest CO2\mathrm{CO}_2 production than allowing CO2\mathrm{CO}_2 to form directly through reaction 4, and therefore results in better agreement with the observed abundances presented here. Further improvement may nevertheless be possible. Different conformers of HOCO may need to be considered explicitly, as detailed computational studies have shown the branching between the products of HOCO + H to be conformer dependent, with CO2\mathrm{CO}_2 formation being favoured by cis-HOCO (Molpeceres et al. [67]). The relative abundance of the different conformers may therefore affect the overall rate of CO2\mathrm{CO}_2 formation and provide a further improvement to the treatment of the CO-to-CO2\mathrm{CO}_2 balance.

Considering the ammonium salts and ammonia in Figure 7, we find that these species remain abundant in the ices across all model variations. The very similar fractional abundance of NH4+\mathrm{NH}_4^+, close to 10% in all models, indicates that its formation is relatively insensitive to the range of physical and chemical conditions explored here. As salt production is dominated by ammonium formate among the two ammonium salts, the HCOO−\mathrm{HCOO}^- abundance closely follows that of NH4+\mathrm{NH}_4^+ in all models. As discussed above, more variation in the fractional abundance is observed for OCN−\mathrm{OCN}^-. Model A and Models D1 to E2 show NH4+\mathrm{NH}_4^+, OCN−\mathrm{OCN}^-, and NH3\mathrm{NH}_3 abundances in good agreement with the observed values. In general, we find a slightly higher NH4+\mathrm{NH}_4^+-to-NH3\mathrm{NH}_3 ratio than observed. This balance may be affected by the absence of dissociation reactions for the ammonium salts in our model. However, photodissociation rates under astrophysically relevant ice conditions for NH4+HCOO−\mathrm{NH}_4^+\mathrm{HCOO}^- and NH4+OCN−\mathrm{NH}_4^+\mathrm{OCN}^-, and for ammonium salts in general, remain unconstrained. Moreover, the ionic environment of the ice may lead to rapid recombination or proton-transfer reactions following ionization, making it unclear whether salt destruction in the ice can be adequately represented by a simple dissociation reaction. Energetic-particle processing may therefore provide a more appropriate framework for investigating the destruction and reproportion of ammonium salts. Proton-irradiation experiments on NH4+SH−\mathrm{NH}_4^+\mathrm{SH}^-, for example, show that irradiation leads to the formation of NH3\mathrm{NH}_3 and reactive sulfur-bearing species, demonstrating that ionization can initiate subsequent chemistry involving both the ammonium ion and its counterion Loeffler et al. [62]. Thus, rather than introducing an isolated dissociation reaction for the ammonium salts, a more complete treatment would involve an ionization-driven reaction network in which the products of salt processing can undergo subsequent proton-transfer, recombination, and other ion-molecule reactions.

Furthermore, additional types of ammonium salts could be included, as a wider range of counterions is expected to be present in the ice. Plausible candidates include sulfur-bearing ionic species, in particular NH4+SH−\mathrm{NH}_4^+\mathrm{SH}^- (Vitorino et al. [99]; Slavinskaya et al. [94]), CN−\mathrm{CN}^- (Noble et al. [69]), and Cl−\mathrm{Cl}^- (Altwegg et al. [3]). Since our models show that ammonium salt formation is limited by the availability of NH3\mathrm{NH}_3, we expect that the inclusion of additional counterions and their associated acids, would not substantially increase the total NH4+\mathrm{NH}_4^+ abundance. Inclusion of other NH4+\mathrm{NH}_4^+ salts in our models would simply redistribute ammonium among the different anions, while leaving the ammonium reservoir (NH3\mathrm{NH}_3 and NH4+\mathrm{NH}_4^+ abundance) relatively unchanged and in reasonable agreement with observation.

The contribution to ammonia production by the molecule forming in the gas and subsequently accreting onto the grain has been neglected in the present study, since we find that NH3\mathrm{NH}_3 and the related species NH and NH2\mathrm{NH}_2 together contribute less than 0.015% to the elemental N budget throughout the course of the simulation.

The dust temperature was kept constant at T=10T = 10 K in all models and was therefore not explored as a variable. Whereas diffusion and desorption of hydrogen is found to respond sensitively only on the dust temperature, KMC simulations of ice chemistry that are mainly driven by radical-radical reactions show only a minor temperature dependence for the ice abundances (Jiménez-Serra et al. [54]; Simons et al. [93]). We reason that this is because (i) H atoms find a reactant before desorption independent of the temperature in the 10-15 K range and (ii) most reactions are non-diffusive radical-radical reactions that are rather temperature independent. Although the rate constant of the acid-base reactions depends exponentially on the temperature, we do not expect a strong temperature dependence of the NH4+_4^+ abundance either, since the acid-base reactions are NH3_3-limited and not reaction-barrier limited.

The robust formation of the two ammonium salts and the limited variation in the fractional abundance of NH4+_4^+ across the different models can be attributed to several factors. First, the main change in several variations of Model A is the abundance of atomic H. Although this affects the absolute amount of NH4+_4^+ formed, it also affects the formation of H2_2O in a similar and proportional manner, leaving the ratio NH4+_4^+ / H2_2O relatively unchanged. Second, we find that changes in the abundance of one precursor to the ammonium salts can be partially compensated by changes in the abundance of the other (e.g. HCOOH and NH3_3), as their formation pathways compete for the available atomic H on the grains.

Conclusions

Using our microscopic KMC model of grain-surface chemistry, combined with gas-phase and physical cloud evolution calculations performed with UCLCHEM, we have modeled the formation of ammonium formate (NH4+_4^+HCOO−^-) and ammonium cyanate (NH4+_4^+OCN−^-) in interstellar ice, motivated by the JWST detection of NH4+_4^+ toward the Chamaeleon I dark molecular cloud. This model framework allows us to treat the formation of NH4+_4^+ salts in the ice in detail while following the chemical and physical evolution of a collapsing molecular cloud.

  1. The abundances of NH4+_4^+, HCOO−^- and, to a lesser extent, OCN−^- are found to be remarkably robust across all model variations explored in this work, particularly when expressed with respect to H2_2O. Moreover, the relative abundances of NH4+_4^+ and OCN−^- are in good agreement with observations.

  1. Salt production is dominated by NH4+_4^+HCOO−^-, which is predominantly formed in the H2_2O-rich ice mantle. NH4+_4^+OCN−^- is mainly formed at a later stage, within the interface between the H2_2O- and CO-rich ice, when the formation of its precursor acid HNCO is enhanced. The production of both salts is ultimately limited by the availability of NH3_3.

  1. An increase in the cosmic-ray ionization rate has a limited effect on salt production with respect to H2_2O. The higher dissociation rate is compensated by the higher production rate because of the increased H abundance. This results in a higher absolute abundance of both NH4+_4^+ and H2_2O.

Given the robust nature of NH4+_4^+ production, we expect that adding further salt species – such as ammonium sulfur salts – would primarily redistribute NH4+_4^+ among different counter anions without significantly altering its total abundance. To further improve the chemical precision of our results, future extensions of the network should incorporate salt destruction processes (e.g., dissociation by energetic particles) to better balance the NH4+_4^+/NH3_3 ratio, constrain the branching ratios of the HOCO + H reaction, and implement environment-dependent rate coefficients. These extensions will allow for a more nuanced treatment of the evolution of ammonium salts in interstellar ices.

H2 formation efficiency

The default UCLCHEM rate for H2_2 formation on grains follows the treatment of Cazaux & Tielens [13, 14] and is given by

RH2,form=12ϵSHσvthn(H)nd,(6)R_{\mathrm{H}_2,\mathrm{form}} = \frac{1}{2}\epsilon S_{\mathrm{H}}\sigma v_{\mathrm{th}} n(\mathrm{H}) n_{\mathrm{d}}, \tag*{(6)}

where σ\sigma is the grain cross-section, vthv_{\mathrm{th}} the thermal velocity, and n(H)n(\mathrm{H}) and ndn_{\mathrm{d}} number density of H atoms in the gas and of dust grains, respectively. SHS_{\mathrm{H}} denotes the sticking probability of an H atom onto a grain and is temperature dependent following Hollenbach & McKee [44]. The recombination efficiency, ϵ\epsilon, is calculated according to Cazaux & Tielens [13] and within the UCLCHEM simulations of the collapsing molecular cloud (Phase 1 and 2; see § 2.1), this factor assumes a constant value relatively close to the maximum efficiency limit of 1, namely ϵ=0.83\epsilon= 0.83.

We can compare the efficiency factor, ϵ\epsilon, to the actual efficiency encountered in the KMC simulations, which we denote as ϵˉ\bar{\epsilon}. In the simulations, H2_2 that desorbs can either originate from H2_2 formation or from desorption of adsorbed H2_2 from the gas phase. This is accounted for in the following way:

ϵˉ=2NH2,des−NH2,depNH,dep,(7)\bar{\epsilon} = 2\frac{N_{\mathrm{H}_2,\mathrm{des}} - N_{\mathrm{H}_2,\mathrm{dep}}}{N_{\mathrm{H},\mathrm{dep}}}, \tag*{(7)}

with NH2,desN_{\mathrm{H}_2,\mathrm{des}} the number of desorbed H2_2 molecules within a certain time bin, and NX,depN_{X,\mathrm{dep}} is the number of species X (= H or H2_2) landing on the grain within the same time bin. Fig. A.1 shows the efficiency calculated from the corresponding KMC simulation using Eq. (A.2) (iteration 0, blue data points) as a function of the fractional abundance of atomic H in the gas. In contrast to the default value, the resulting efficiency is found to depend strongly on the atomic H gas abundance. As the atomic H abundance decreases – which, in practice, corresponds to the temporal evolution of the ice mantle – ϵˉ\bar{\epsilon} initially lies below the default value, with ϵˉ∼0.6\bar{\epsilon} \sim0.6 at n(H)/nH∼10−3n(\mathrm{H})/n_{\mathrm{H}} \sim10^{-3}, and subsequently decreases towards zero for n(H)/nH∼10−5n(\mathrm{H})/n_{\mathrm{H}} \sim10^{-5}. We attribute these lower values of ϵˉ\bar{\epsilon} to the consumption of atomic H in surface reactions other than H2_2 recombination. The abundance ratio n(H)/nH∼10−5n(\mathrm{H})/n_{\mathrm{H}} \sim10^{-5} corresponds to the stage at which CO ice begins to form on top of the already established H2_2O ice mantle. The interface between these two ice layers is also where the chemical activity is expected to peak. Indeed, a minimum in ϵˉ\bar{\epsilon} can be observed around n(H)/nH<10−5n(\mathrm{H})/n_{\mathrm{H}} < 10^{-5}, after which it increases again towards the default value of ∼0.83\sim0.83. This latter regime corresponds to a later evolutionary stage in which most reactive atomic species have already been depleted, and H atoms are mostly involved in subsequent hydrogenation and abstraction reactions leading to efficient H2_2-formation cycles.

To better reproduce the H2_2-formation efficiency encountered in the KMC simulation, we replace the default recombination efficiency from Cazaux & Tielens [13] with a custom efficiency factor (ϵˉfit\bar{\epsilon}_{\mathrm{fit}}). To this end, we first fit the efficiencies obtained from the KMC simulation which was still coupled to the default UCLCHEM treatment (iteration 0) with an asymptotic exponential function

ϵˉfit(n(H))=a[1−exp⁡(−bn(H)nH)],(8)\bar{\epsilon}_{\mathrm{fit}}(n(\mathrm{H})) = a \left[1-\exp\left(-b\frac{n(\mathrm{H})}{n_{\mathrm{H}}}\right)\right], \tag*{(8)}

where aa denotes the asymptotic maximum efficiency and bb determines the exponential scaling. Both quantities are treated as free parameters. Only a subset of the KMC data points are included in the fit, corresponding to the fractional atomic H abundance range

Determination of the custom efficiency factor

Figure A.1. Determination of the custom efficiency factor, ϵˉfit(n(H))\bar{\epsilon}_{\mathrm{fit}}(n(\mathrm{H})), by which the default H2_2-recombination efficiency, ϵ\epsilon, in UCLCHEM is replaced. The value of the latter is depicted by the green dashed line. Blue and orange data points represent the efficiency determined using Eq. (A.2) from the KMC coupled to the UCLCHEM simulation with the default (iteration 0) and the custom (iteration 1) efficiency respectively. Data points within the selected range (blue- and orange-shaded area) are fit by an exponential growth function (Eq. (A.3)) yielding ϵˉfit(n(H))\bar{\epsilon}_{\mathrm{fit}}(n(\mathrm{H})) for iteration 0 and 1 respectively). The KMC simulations are iterations of Model A, as described in Sect. 3.1. The datapoints were obtained by averaging over 1000 year intervals and 4 independent runs.

Figure A.2. Time evolution of the gas abundances of the main atomic species and CO during the collapse and dense-cloud stages (Phases 1 and 2) for iterations 0 and 1, corresponding to the default and custom H2_2 recombination efficiencies, respectively. The use of the custom efficiency primarily affects the abundance of atomic H, while the abundances of O, N, and CO remain largely unchanged.

1.3×10−3≥n(H)/nH≥4.5×10−61.3 \times10^{-3} \ge n(\mathrm{H})/n_{\mathrm{H}} \ge4.5 \times10^{-6} (blue shaded area). At lower atomic H abundances, the efficiency increases rapidly and cannot be reproduced by the adopted functional form. This regime roughly corresponds to the end of phase 2 and beyond (Sect. 2), and as mentioned above, is a phase where the ice chemistry has largely settled. This regime is not important for the purposes of the present study and therefore we allow for the underestimation of surface-H2_2 formation there. Optimizing the fit yields a=0.6a = 0.6 and b=3500b = 3500.

Next, we perform a second UCLCHEM simulation replacing ϵ\epsilon in Eq. (A.1) by ϵˉfit\bar{\epsilon}_{\mathrm{fit}} and using a sticking probability of H atoms equal to unity, as relatively recent studies suggest that this is a good approximation for gas and grain temperatures of 10 K ([98, 26]). The efficiencies extracted from the corresponding KMC simulation (iteration 1) are also shown in Fig. A.1. Repeating the fitting procedure yields nearly identical values of aa and bb, demonstrating that

Figure A.3. Time evolution of selected grain-surface species during the collapse and dense-cloud stages (Phases 1 and 2) for iterations 0 and 1, corresponding to the default and custom H2_2 recombination efficiencies, respectively. The increased atomic H abundance in iteration 1 enhances the formation of hydrides and CO-hydrogenation products during Phase 2. Consequently, larger abundances of ammonium salts are produced, although their formation still occurs predominantly in the H2_2O-rich ice during the collapse phase for both iterations.

ϵˉfit(n(H))\bar{\epsilon}_{\mathrm{fit}}(n(\mathrm{H})) converges after a single iteration. Again only a subset of the KMC data points are included in the fit (1.3×10−3≥n(H)/nH≥2×10−51.3 \times10^{-3} \ge n(\mathrm{H})/n_{\mathrm{H}} \ge2 \times10^{-5}).

Employing the custom efficiency factor has a negligible effect on the grain-surface formation of H2_2 in the KMC simulations. It does, however, significantly affect the atomic hydrogen abundance predicted by UCLCHEM. Fig. A.2 shows the gas abundances of the main atomic species, together with CO, during Phases 1 and 2. While the abundances of O, N, and CO remain essentially unchanged throughout the collapse and subsequent dense-cloud phase, the abundance of atomic H exhibits a less pronounced decline during Phase 2 in iteration 1 than in iteration 0. As a consequence, the iteration 1 KMC simulation experiences a higher deposition flux of atomic H, leading to an enhanced surface abundance of H atoms, particularly during Phase 2.

The time evolution of the abundances of several ice species during phases 1 and 2 are shown in Fig. A.3. For iteration 1, we indeed observe enhanced formation of hydrides around and after the collapse time, as illustrated by the increased abundances of H2_2O and NH3_3. This enhancement is a direct consequence of the increased availability of atomic H on the grain surface.

Additional model details

Figure B.1. Flowchart of our setup simulating the molecular cloud with the UCLCHEM and the KMC code. Parameter values shown for modeling line of sight towards J110621 of the Chamaeleon I cloud, which we take as an example of a typical dense cloud.

ReactionProductsRate [s−1^{-1}]Branching ratioRef.
NH3_3 + HCOOH →\rightarrowNH4+_4^{+} HCOO−^{-}1.28×10−61.28 \times10^{-6}1Bergner et al. [7]
NH3_3 + HNCO →\rightarrowNH4+_4^{+} OCN−^{-}2.88×10−52.88 \times10^{-5}1Mispelaer et al. [65]
HCO + OH →\rightarrowHCOOH2×10112 \times10^{11}0.5Döntgen & Leonhard [24]
HCO + OH →\rightarrowCO + H2_2O2×10112 \times10^{11}0.5Döntgen & Leonhard [24]
CH2_2OH + O →\rightarrowHCOOH + H2×10112 \times10^{11}0.5Seetula et al. [91]
CH2_2OH + O →\rightarrowH2_2CO + OH2×10112 \times10^{11}0.5Seetula et al. [91]
CO + OH →\rightarrowHOCO1×10101 \times10^{10}1Molpeceres et al. [66]
HOCO + H →\rightarrowHCOOH2×10112 \times10^{11}0.33
HOCO + H →\rightarrowCO2_2 + H2_22×10112 \times10^{11}0.33
HOCO + H →\rightarrowCO + H2_2O2×10112 \times10^{11}0.33
HOCO + N →\rightarrowHOCON2×10112 \times10^{11}0.8Dibble & Zeng [23]
HOCON + H →\rightarrowOCN + H2_2O2×10112 \times10^{11}0.3
HOCON + H →\rightarrowHNCO + OH2×10112 \times10^{11}0.3
OCN + H →\rightarrowHNCO2×10112 \times10^{11}1
CO + O →\rightarrowCO2_21×10−101 \times10^{-10}1Goumans et al. [39]
HCO + O →\rightarrowCO2_2 + H2×10112 \times10^{11}0.5Baulch et al. [5]; Campbell & Handy [12]; Westenberg & Dehaas [101]
HCO + O →\rightarrowCO + OH2×10112 \times10^{11}0.5Baulch et al. [5]; Campbell & Handy [12]; Westenberg & Dehaas [101]

Table B.1. Overview of newly added reactions.

References

  1. [1]Altwegg, K., Balsiger, H., & Fuselier, S. A. 2019, ARA&A, 57, 113
  2. [2]Altwegg, K., Balsiger, H., Hännі, N., et al. 2020, Nat. Astron., 4, 533
  3. [3]Altwegg, K., Combi, M., Fuselier, S. A., et al. 2022, MNRAS, 516, 3900
  4. [4]Arasa, C., van Hemert, M. C., van Dishoeck, E. F., & Kroes, G. J. 2013, J. Phys. Chem. A, 117, 7064
  5. [5]Baulch, D. L., Bowman, C. T., Cobos, C. J., et al. 2005, J. Phys. Chem. Ref. Data, 34, 757
  6. [6]Bennett, C. J., Hama, T., Kim, Y. S., Kawasaki, M., & Kaiser, R. I. 2010, ApJ, 727, 27
  7. [7]Bergner, J. B., Öberg, K. I., Rajappan, M., & Fayolle, E. C. 2016, ApJ, 829, 85
  8. [8]Bialy, S., Chemke, A., Neufeld, D. A., et al. 2026, Nat. Astron., 10, 540
  9. [9]Bohlin, R. C., Savage, B. D., & Drake, J. F. 1978, ApJ, 224, 132
  10. [10]Boogert, A. C. A., Pontoppidan, K. M., Knez, C., et al. 2008, ApJ, 678, 985
  11. [11]Brown, P. D., Charnley, S. B., & Millar, T. J. 1988, MNRAS, 231, 409
  12. [12]Campbell, I. M. & Handy, B. J. 1978, J. Chem. Society, Faraday Transactions 1: Phys. Chem. in Condensed Phases, 74, 316
  13. [13]Cazaux, S. & Tielens, A. G. G. M. 2002, ApJ, 575, L29
  14. [14]Cazaux, S. & Tielens, A. G. G. M. 2004, ApJ, 604, 222
  15. [15]Chang, Q. & Herbst, E. 2016, ApJ, 819, 145
  16. [16]Clément, A., Taillard, A., Wakelam, V., et al. 2023, A&A, 675, A165
  17. [17]Coutens, A., Commerçon, B., & Wakelam, V. 2020, A&A, 643, A108
  18. [18]Cuppen, H. M. & Herbst, E. 2007, ApJ, 668, 294
  19. [19]Cuppen, H. M., Karssemeijer, L. J., & Lamberts, T. 2013, Chem. Rev., 113, 8840
  20. [20]Cuppen, H. M., van Dishoeck, E. F., Herbst, E., & Tielens, A. G. G. M. 2009, A&A, 508, 275
  21. [21]Cuppen, H. M., Walsh, C., Lamberts, T., et al. 2017, Space Sci. Rev., 212, 1
  22. [22]Dalgarno, A. 2006, Proc. Natl. Acad. Sci. USA, 103, 12269
  23. [23]Dibble, T. S. & Zeng, Y. 2010, Chem. Phys. Letters, 495, 170
  24. [24]Döntgen, M. & Leonhard, K. 2016, J. Phys. Chem. A, 120, 1819
  25. [25]Drozdovskaya, M. N., van Dishoeck, E. F., Rubin, M., Jørgensen, J. K., & Altwegg, K. 2019, MNRAS, 490, 50
  26. [26]Dupuy, J. L., Lewis, S. P., & Stancil, P. C. 2016, ApJ, 831, 54
  27. [27]Fedoseev, G., Ioppolo, S., Zhao, D., Lamberts, T., & Linnartz, H. 2014, MNRAS, 446, 439
  28. [28]Filacchione, G., Groussin, O., Herny, C., et al. 2019, Space Sci. Rev., 215, 19
  29. [29]Fraser, H. J., Collings, M. P., McCoustra, M. R. S., & Williams, D. A. 2001, MNRAS, 327, 1165
  30. [30]Fray, N., Bardyn, A., Cottin, H., et al. 2017, MNRAS, 469, S506
  31. [31]Frerking, M. A., Langer, W. D., & Wilson, R. W. 1982, ApJ, 262, 590
  32. [32]Fuchs, G. W., Cuppen, H. M., Ioppolo, S., et al. 2009, A&A, 505, 629
  33. [33]Gálvez, O., Maté, B., Herrero, V. J., & Escribano, R. 2010, ApJ, 724, 539
  34. [35]Garrod, R. T. & Pauly, T. 2011, ApJ, 735, 15
  35. [36]Geballe, T. R. 1984, Occ. Rep. R. Obs. Edinb., 12, 56
  36. [37]Geiss, J. 1988, Rev. Mod. Astron., 1
  37. [38]Gerakines, P. A., Yarnall, Y. Y., & Hudson, R. L. 2024, Icarus, 413, 116007
  38. [39]Goumans, T. P. M., Uppal, M. A., & Brown, W. A. 2008, MNRAS, 384, 1158
  39. [40]Grim, R. J. A., Greenberg, J. M., de Groot, M. S., et al. 1989, A&AS, 78, 161
  40. [41]Heays, A. N., Bosman, A. D., & van Dishoeck, E. F. 2017, A&A, 602, A105
  41. [42]Himmel, H., Junker, M., & Schnöckel, H. 2002, J. Chem. Phys., 117, 3321
  42. [43]Holdship, J., Viti, S., Jiménez-serra, I., Makrymallis, A., & Priestley, F. 2017, AJ, 154, 38
  43. [44]Hollenbach, D. & McKee, C. F. 1979, ApJS, 41, 555
  44. [45]Hudson, R. R. & Moore, M. H. 1999, Icarus, 140, 451
  45. [46]Indriolo, N. & McCall, B. J. 2012, ApJ, 745, 91
  46. [47]Ioppolo, S., Cuppen, H. M., van Dishoeck, E. F., & Linnartz, H. 2010, MNRAS, 410, 1089
  47. [48]Ioppolo, S., Fedoseev, G., Chuang, K., et al. 2020, Nat. Astron., 5, 197
  48. [49]Ioppolo, S., van Boheemen, Y., Cuppen, H. M., van Dishoeck, E. F., & Linnartz, H. 2011, MNRAS, 413, 2281
  49. [51]Ishibashi, A., Molpeceres, G., Hidaka, H., et al. 2024, ApJ, 976, 162
  50. [52]Jenkins, E. B. 2009, ApJ, 700, 1299
  51. [53]Jessberger, E. K., Christoforidis, A., & Kissel, J. 1988, Nature, 332, 691
  52. [54]Jiménez-Serra, I., Megías, A., Salarias, J., et al. 2025, A&A, 695, A247
  53. [55]Jiménez-Serra, I., Viti, S., Qué­nard, D., & Holdship, J. 2018, ApJ, 862, 128
  54. [56]Jin, M. & Garrod, R. T. 2020, ApJS, 249, 26
  55. [57]Keane, J. V., Tielens, A. G. G. M., Boogert, A. C. A., Schutte, W. A., & Whittet, D. C. 2001, A&A, 376, 254
  56. [58]Kruczkiewicz, F., Vitorino, J., Congiu, E., Theulé, P., & Dulieu, F. 2021, A&A, 652, A29
  57. [59]Lamberts, T. de Vries, X., & Cuppen, H. M. 2014, Faraday Discuss., 168, 327
  58. [60]Lee, T. J. 1972, Nat. Phys. Sci., 237, 99
  59. [61]Lodders, K. 2010, Ap&SS Proc., 379
  60. [62]Loeffler, M. J., Hudson, R. L., Chanover, N. J., & Simon, A. A. 2015, Icarus, 258, 181
  61. [63]McClure, M. K., Rocha, W. R. M., Pontoppidan, K. M., et al. 2023, Nat. Astron., 7, 431
  62. [64]McElroy, D., Walsh, C., Markwick, A. J., et al. 2013, A&A, 550, A36
  63. [65]Mispelaer, F., Theulé, P., Duvernay, F., Roubin, P., & Chiavassa, T. 2012, A&A, 540, A40
  64. [66]Molpeceres, G., Enrique-Romero, J., & Aikawa, Y. 2023, A&A, 677, A39
  65. [67]Molpeceres, G., Enrique-Romero, J., Ishibashi, A., et al. 2025, MNRAS, 538, 1565
  66. [68]Noble, J. A., Dulieu, F., Congiu, E., & Fraser, H. J. 2011, ApJ, 735, 121
  67. [69]Noble, J. A., Theule, P., Borget, F., et al. 2012, MNRAS, 428, 3262
  68. [70]Novozamsky, J. H., Schutte, W. A., & Keane, J. V. 2001, A&A, 379, 588
  69. [71]Oba, Y., Watanabe, N., Kouchi, A., Hama, T., & Pironello, V. 2010, ApJ, 712, L174
  70. [72]Öberg, K. I., Boogert, A. C. A., Pontoppidan, K. M., et al. 2011, ApJ, 740, 109
  71. [73]Öberg, K. I., Bottinelli, S., & van Dishoeck, E. F. 2009, A&A, 494, L13
  72. [74]Obolentseva, M., Ivlev, A. V., Silsbee, K., et al. 2024, ApJ, 973, 142
  73. [75]Padovani, M., Ivlev, A. V., Galli, D., et al. 2020, Space Sci. Rev., 216, 29
  74. [76]Park, J. & Woon, D. E. 2006, ApJ, 648, 1285
  75. [77]Poch, O., Istiqomah, I., Quirico, E., et al. 2020, Sci., 367, eaaw7462
  76. [78]Poch, O., Istiqomah, I., Quirico, E., et al. 2023, Ap&SS Proc., 271
  77. [79]Puzzarini, C. & Alessandrini, S. 2024, ACS Cent. Sci., 10, 13
  78. [80]Qasim, D., Lamberts, T., He, J., et al. 2019, A&A, 626, A118
  79. [81]Qué­nard, D., Ile, D. J., Jiménez-Serra, I., et al. 2018, ApJ, 868, 9
  80. [82]Quirico, E., Moroz, L., Schmitt, B., et al. 2016, Icarus, 272, 32
  81. [83]Raunier, S., Chiavassa, T., Marinelli, F., Allouche, A., & Aycard, J. 2003, J. Phys. Chem. A, 107, 9335
  82. [84]Rawlings, J. M. C., Hartquist, T. W., Menten, K. M., & Williams, D. A. 1992, MNRAS, 255, 471
  83. [85]Rocha, W., McClure, M., Sturm, J., et al. 2025, A&A
  84. [86]Rocha, W. R. M., van Dishoeck, E. F., Ressler, M. E., et al. 2024, A&A, 683, A124
  85. [87]Ruaud, M., Loison, J. C., Hickson, K. M., et al. 2015, MNRAS, 447, 4004
  86. [88]Savage, B. D. & Sembach, K. R. 1996, ARA&A, 34, 279
  87. [89]Schutte, W. A., Boogert, A. C. A., Tielens, A. G. G. M., et al. 1999, A&A, 343, 966
  88. [90]Schutte, W. A. & Khanna, R. K. 2003, A&A, 398, 1049
  89. [91]Seetula, J., Kalinovski, I., Slagle, I., & Gutman, D. 1994, Chem. Phys. Letters, 224, 533
  90. [92]Shingledecker, C. N., Tennis, J., Gal, R. L., & Herbst, E. 2018, ApJ, 861, 20
  91. [93]Simons, M. A. J., Lamberts, T., & Cuppen, H. M. 2020, A&A, 634, A52
  92. [94]Slavinskaya, K., Boogert, A. C. A., Tyczhoniec, Ł., et al. 2025, A&A, 693, A146
  93. [95]Spitzer, L. J. & Tomasko, M. G. 1968, ApJ, 152, 971
  94. [96]Theulé, P., Duvernay, F., Danger, G., et al. 2013, Adv. Space Res., 52, 1567
  95. [97]van Broekhuizen, F. A., Pontoppidan, K. M., Fraser, H. J., & van Dishoeck, E. F. 2005, A&A, 449, 249
  96. [98]Veeraghattam, V. K., Manrodt, K., Lewis, S. P., & Stancil, P. C. 2014, ApJ, 790, 4
  97. [99]Vitorino, J., Loison, J.-C., Wakelam, V., Congiu, E., & Dulieu, F. 2024, MNRAS, 533, 52
  98. [100]Wakelam, V. & Herbst, E. 2008, ApJ, 680, 371
  99. [101]Westenberg, A. A. & Dehaas, N. 1972, J. Phys. Chem., 76, 2215

Paper details

vlnc:W_znhx4jfh
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents