betaFeedback

WorksPhysics and Astronomy

Top quark couplings at the muon collider

Abstract

We present an overview of the sensitivity of a muon collider to the flavor-diagonal electroweak couplings of the top quark, using dimension-six operators of the Warsaw basis. Of the nine fermion-boson operators involving the top quark, the bounds on three are not competitive with existing limits, and we focus on the remaining six. We estimate individual 95%95\% CL limits on the corresponding Wilson coefficients at s=3\sqrt{s} = 3, 66, 1010, and 1414~TeV from 2σ2σ statistical cross-section uncertainties, and assess the effect of an assumed systematic uncertainty. We consider six top-quark production modes: ttˉt\bar t, ttˉht \bar t h, ttˉννˉt \bar t ν\bar ν, ttˉμ+μ−t \bar t μ^+ μ^-, single-top tbˉμ−νˉμt\bar b μ^- \bar ν_μ, and single-top-plus-Higgs, the last three for several rapidity coverages of the final-state muons. The ss-channel ttˉt\bar t and ttˉht\bar t h processes give the strongest sensitivity to the electroweak dipole couplings, with allowed intervals narrower than the current LHC ones by factors of about 33 to 66 at s=3\sqrt{s} = 3 and 66 TeV, and by an order of magnitude or more at 1010 and 1414 TeV. The left- and right-handed ttZttZ couplings, as well as the Yukawa tthtth couplings (for s≥6\sqrt{s} \geq 6 TeV), are best probed in ttˉννˉt \bar t ν\bar ν production, while the right-handed tbWtbW coupling is best probed in single-top production. For the ttZttZ and tbWtbW couplings, the limits improve on the current LHC bounds by factors from about 1.51.5 to more than an order of magnitude. Our results agree with previous analyses of the Yukawa and the dipole couplings, and provide a roadmap for more in-depth studies.

Introduction

The Large Hadron Collider (LHC) program has probed Higgs-boson and top-quark interactions, and has found all observables to be compatible with the Standard Model (SM). The high-luminosity phase of the LHC (HL-LHC) is expected to improve these analyses somewhat, thanks to the increase in data. However, there is a recognized need to probe electroweak interactions at high energies in the cleaner environment of a lepton collider. Much attention has been given to the Muon Collider (MuC), since such a machine would combine the energy reach of a hadron collider with the precision of a lepton collider [1, 2, 3, 4].

We are interested in the sensitivity that the MuC can reach at different energies for the couplings of the top quark to gauge and Higgs bosons generated by the dimension-six operators of the Warsaw basis [5]. We consider the flavor-diagonal operators only; for flavor-changing top-quark couplings at the MuC, we refer to Refs. [6, 7, 8, 9, 10]. We also do not consider four-fermion operators, which have been addressed in Ref. [11]. A previous study, Ref. [12], has addressed two of the couplings (the electroweak dipole operators), and yet another, Ref. [13], has given some limits on three others. Here, we aim for a comprehensive analysis of the nine possible Wilson coefficients of interest and of all the most relevant top-quark production processes. For three of them, CφQ(+),CtGC_{\varphi Q}^{(+)}, C_{tG}, and CbWC_{bW}, top production at the MuC is not competitive with existing limits (see Sect. 2), and we focus on the remaining six.

Currently, two center-of-mass energies in particular are considered desirable and realistic for the MuC project: s=3\sqrt{s}=3 and 1010 TeV [14]. In this study, we also include s=6\sqrt{s}=6 and 1414 TeV, to obtain a better view of the energy dependence. For the integrated luminosity, we use the well-known formula L=Ecm2/10\mathcal{L}=E_{\mathrm{cm}}^2/10, with L\mathcal{L} in units of ab−1\mathrm{ab}^{-1} and EcmE_{\mathrm{cm}} in TeV [2]. In Table 1, we show the four energies and the corresponding integrated luminosities.

s\sqrt{s} [TeV]361014
L\mathcal{L} [ab−1^{-1}]0.93.61019.6

Table 1. Benchmark values for energy and luminosity of a high energy MuC used in this study. Luminosity given by the equation (1) in [2].

Higgs physics and the nature of electroweak symmetry breaking (EWSB) are the main focus of interest in the literature, especially at s=10\sqrt{s}=10 TeV where WWWW and ZZZZ fusion production modes of the Higgs boson become dominant. The second mode involves outgoing muons with rapidities in the range 3≤∣y∣<63 \leq|y| < 6, which makes the case for tagging forward muons [15]. For a recent and thorough study of the opportunities offered by tagging forward muons, we refer to Ref. [16] (see also Refs. [17, 18, 19]). The European Strategy for Particle Physics (2026 update) is already considering such a capability as aspirational, and it focuses on detecting muons with rapidities up to ∣y∣=4|y|=4 or ∣y∣=6|y|=6 [14]. In this study, we consider final-state muons in the ranges ∣y∣<2.5|y|<2.5, ∣y∣<4|y|<4, and ∣y∣<6|y|<6 for processes that involve neutral-gauge-boson fusion diagrams.

The article is organized as follows. In Sect. 2, we present the dimension-six fermion-boson operators involving the top quark that are relevant for this study. In Sect. 3, we discuss the most important tree-level production modes with top quarks in the final state: μ+μ−→ttˉ\mu^+\mu^- \to t\bar{t}, ttˉht\bar{t}h, ttˉννˉt\bar{t}\nu\bar{\nu}, ttˉμ+μ−t\bar{t}\mu^+\mu^-, tbˉμ−νˉμt\bar{b}\mu^-\bar{\nu}_{\mu}, tbˉμ−νˉμht\bar{b}\mu^-\bar{\nu}_{\mu}h. Based on 2σ2\sigma cross-section uncertainties, we estimate 95% confidence-level (CL) limits in Sect. 4, where we identify the processes with the highest sensitivity for each of the coefficients and, in subsection 4.7, provide two-dimensional allowed regions and marginalized limits for the electroweak dipole coefficients. In Sect. 5, we present a summary and our final remarks. Appendix § 7 gives the individual limits on the six coefficients of interest, for both the real and imaginary parts of the complex ones; in each case, we show the limits set by the five most sensitive processes for that coefficient, together with the effect of an assumed systematic uncertainty, which can be significant for processes with large cross sections.

Dimension-six fermion-boson operators involving the top quark

We refer to the list of dimension-six effective operators known as the Warsaw basis in Ref. [5] and to a subsequent article [20], where the associated Feynman rules (in RξR_{\xi} gauges) are provided. Two types of operators involving the top quark are recognized: fermion-boson and four-fermion. We will not consider the latter; for a recent study of the sensitivity to four-fermion interactions involving two leptons and two top quarks at the MuC, we refer to Ref. [11]. There are nine fermion-boson operators where up-type quarks appear:

Qφu=φ†iD↔μφ uˉγμu,Qφq(1)=(φ†iD↔μφ)qˉγμq,Qφq(3)=(φ†iD↔μkφ)qˉτkγμq,Qφud=(φ~†iD↔μφ)uˉγμd,Quφ=φ†φ qˉuφ~,QuB=qˉσμνuφ~Bμν,QuW=qˉσμνuτkφ~Wμνk,QdW=qˉσμνdτkφWμνk,QuG=qˉσμνuTAφ~GμνA.(1)\begin{aligned} Q_{\varphi u} &= \varphi^\dagger i\overleftrightarrow{D}_{\mu}\varphi\,\bar{u}\gamma^\mu u,\\ Q_{\varphi q}^{(1)} &= (\varphi^\dagger i\overleftrightarrow{D}_{\mu}\varphi)\bar{q}\gamma^\mu q,\\ Q_{\varphi q}^{(3)} &= (\varphi^\dagger i\overleftrightarrow{D}_{\mu}^{k}\varphi)\bar{q}\tau^{k}\gamma^\mu q,\\ Q_{\varphi ud} &= (\widetilde{\varphi}^{\dagger}i\overleftrightarrow{D}_{\mu}\varphi)\bar{u}\gamma^\mu d,\\ Q_{u\varphi} &= \varphi^\dagger\varphi\,\bar{q}u\widetilde{\varphi},\\ Q_{uB} &= \bar{q}\sigma^{\mu\nu}u\widetilde{\varphi}B_{\mu\nu},\\ Q_{uW} &= \bar{q}\sigma^{\mu\nu}u\tau^{k}\widetilde{\varphi}W_{\mu\nu}^{k},\\ Q_{dW} &= \bar{q}\sigma^{\mu\nu}d\tau^{k}\varphi W_{\mu\nu}^{k},\\ Q_{uG} &= \bar{q}\sigma^{\mu\nu}uT^{A}\widetilde{\varphi}G_{\mu\nu}^{A}. \tag*{(1)} \end{aligned}

We omit family indices, as we are only interested in flavor-diagonal couplings of the third family. As is common practice in the literature, we will refer to the right-handed up-type quark uu of the third family as tt, and use qq for the left-handed doublets of the first two generations and QQ for that of the third. Therefore, we will write QφuQ_{\varphi u} as QφtQ_{\varphi t}, QφudQ_{\varphi ud} as QφtbQ_{\varphi tb}, Qφq(1)Q_{\varphi q}^{(1)} as QφQ(1)Q_{\varphi Q}^{(1)}, and so on. The Lagrangian we use is written as:

L=LSM+1Λ2[CφtQφt+CφQ(1)QφQ(1)+CφQ(3)QφQ(3)]+1Λ2[CφtbQφtb+CtφQtφ+CtBQtB+CtWQtW+CbWQbW+CtGQtG+H.c.].(2)\mathcal{L}=\mathcal{L}_{\mathrm{SM}}+\frac{1}{\Lambda^{2}}\left[C_{\varphi t}Q_{\varphi t}+C_{\varphi Q}^{(1)}Q_{\varphi Q}^{(1)}+C_{\varphi Q}^{(3)}Q_{\varphi Q}^{(3)}\right] +\frac{1}{\Lambda^{2}}\left[C_{\varphi tb}Q_{\varphi tb}+C_{t\varphi}Q_{t\varphi}+C_{tB}Q_{tB}+C_{tW}Q_{tW}+C_{bW}Q_{bW}+C_{tG}Q_{tG}+\mathrm{H.c.}\right]. \tag*{(2)}

Notice that the first three operators in (1) are Hermitian; correspondingly, the Wilson coefficients on the first line of (2) are real, whereas those on the second line are complex. We set the mass scale Λ=1\Lambda=1 TeV for convenience.

Concerning the operators QφQ(1)Q_{\varphi Q}^{(1)} and QφQ(3)Q_{\varphi Q}^{(3)}, the following combinations are in common use in the literature [21, 22]:

QφQ(±)≡12[QφQ(1)±QφQ(3)],CφQ(±)≡CφQ(1)±CφQ(3),(3)Q_{\varphi Q}^{(\pm)}\equiv\frac{1}{2}\left[Q_{\varphi Q}^{(1)}\pm Q_{\varphi Q}^{(3)}\right],\qquad C_{\varphi Q}^{(\pm)}\equiv C_{\varphi Q}^{(1)}\pm C_{\varphi Q}^{(3)}, \tag*{(3)}

so that

CφQ(1)QφQ(1)+CφQ(3)QφQ(3)=CφQ(−)QφQ(−)+CφQ(+)QφQ(+).(4)C_{\varphi Q}^{(1)}Q_{\varphi Q}^{(1)}+C_{\varphi Q}^{(3)}Q_{\varphi Q}^{(3)}=C_{\varphi Q}^{(-)}Q_{\varphi Q}^{(-)}+C_{\varphi Q}^{(+)}Q_{\varphi Q}^{(+)}. \tag*{(4)}

Both QφQ(+)Q_{\varphi Q}^{(+)} and QφQ(−)Q_{\varphi Q}^{(-)} generate a left-handed tbWtbW coupling, but QφQ(−)Q_{\varphi Q}^{(-)} generates a ttZttZ vertex, whereas QφQ(+)Q_{\varphi Q}^{(+)} generates a ZbbZbb coupling. It follows that CφQ(+)C_{\varphi Q}^{(+)} is strongly bounded at the tree level by electroweak precision data from LEP and SLC. A recent limit can be found in Ref. [23]: −0.015≤CφQ(+)≤+0.019-0.015\leq C_{\varphi Q}^{(+)}\leq+0.019 (Table 6, 68% CL). It is important to bear this separation in mind: neglecting it can lead to artificially strong individual constraints on CφQ(1)C_{\varphi Q}^{(1)} and CφQ(3)C_{\varphi Q}^{(3)} when they are obtained from global fits that include LEP and SLC measurements. For example, let us consider CφQ(3)C_{\varphi Q}^{(3)}. In a 2025 publication, the ATLAS collaboration reports individual limits of [−0.45,0.13][-0.45,0.13] (68% CL) based on top-quark processes recorded by the ATLAS detector (see Table 7 in Ref. [28]). In a 2026 publication, they report a much smaller bound of ±0.02\pm0.02 (68% CL), which is due to the inclusion of LEP and SLC data (see Figure 7 in Ref. [27]). A similar situation can be found in Refs. [13, 25, 29, 30]. It should be noted that CφQ(−)C_{\varphi Q}^{(-)} can also be bounded by electroweak data, but the sensitivity comes from contributions at the one-loop level. In this article, we are interested in the sensitivity from direct, tree-level contributions.

CtWrC_{tW r}CtBrC_{tB r}CtWrC_{tW r} [12]CtBrC_{tB r} [12]CtWrC_{tW r} [13]
tˉth−3 TeV\bar{t}t h - 3\ \mathrm{TeV}[−0.028,+0.134][-0.028,+0.134][−0.022,+0.112][-0.022,+0.112]0.0290.0290.0230.0230.030.03
tˉth−6 TeV\bar{t}t h - 6\ \mathrm{TeV}[−0.009,+0.036][-0.009,+0.036][−0.007,+0.030][-0.007,+0.030]−−--−−--−−--
tˉth−10 TeV\bar{t}t h - 10\ \mathrm{TeV}[−0.004,+0.013][-0.004,+0.013][−0.003,+0.011][-0.003,+0.011]0.0040.0040.0030.0030.0070.007
tˉth−14 TeV\bar{t}t h - 14\ \mathrm{TeV}[−0.002,+0.007][-0.002,+0.007][−0.002,+0.006][-0.002,+0.006]−−--−−--−−--

Table 6. Individual limits on the dipole coefficients CtWrC_{tW r} and CtBrC_{tB r} from μ+μ−→ttˉh\mu^{+}\mu^{-} \to t\bar{t}h. The limits correspond to the cross-section uncertainties given in Table 4.

CφQ(−)C_{\varphi Q}^{(-)}CφtC_{\varphi t}CtφrC_{t\varphi r}
3 TeV[−0.52,+0.55][-0.52,+0.55][−0.38,+0.48][-0.38,+0.48][−3.47,+4.49][-3.47,+4.49]
6 TeV[−0.18,+0.19][-0.18,+0.19][−0.11,+0.12][-0.11,+0.12][−1.67,+2.41][-1.67,+2.41]
10 TeV[−0.10,+0.10][-0.10,+0.10][−0.050,+0.056][-0.050,+0.056][−1.07,+1.68][-1.07,+1.68]
14 TeV[−0.063,+0.065][-0.063,+0.065][−0.030,+0.034][-0.030,+0.034][−0.79,+1.32][-0.79,+1.32]

Table 7. Individual limits on coefficients CφQ(−)C_{\varphi Q}^{(-)}, CφtC_{\varphi t} and CtφrC_{t\varphi r} from the production mode ttˉννˉt\bar{t}\nu\bar{\nu}. The limits correspond to the cross-section uncertainties given in Table 4.

Figure 7. Individual limits on the real and imaginary parts of the dipole couplings CtWC_{tW} and CtBC_{tB}. Solid central bars represent limits from the cross-section statistical uncertainties (Table 4), while semi-transparent extensions include an assumed 2% systematic uncertainty added in quadrature.

There have been a substantial number of articles presenting limits from the LHC in the last 15 years. In Table 2 we show 95% CL bounds based on top-quark production as reported by CMS and ATLAS publications in the last three years. Since the maximum size of CφQ(+)C_{\varphi Q}^{(+)} is about two orders of magnitude smaller than the limits on CφQ(−)C_{\varphi Q}^{(-)}, we can use the approximation CφQ(1)≃−CφQ(3)C_{\varphi Q}^{(1)} \simeq-C_{\varphi Q}^{(3)}, so that CφQ(−)≃2CφQ(1)C_{\varphi Q}^{(-)} \simeq2C_{\varphi Q}^{(1)}. Indeed, this relation is consistent with the limits shown in Table 2.

CbWC_{bW} [24]CtGC_{tG} [24]CtBC_{tB} [25]CtWC_{tW} [25]CtφC_{t\varphi} [27]
[−0.75,0.75][-0.75, 0.75][−0.21,0.24][-0.21, 0.24][−0.15,0.016][-0.15, 0.016][−0.26,0.034][-0.26, 0.034][−1.6,2.8][-1.6, 2.8]
CφtbC_{\varphi tb} [24]CφtC_{\varphi t} [26]CφQ(1)C_{\varphi Q}^{(1)} [26]CφQ(3)C_{\varphi Q}^{(3)} [24]CφQ(−)C_{\varphi Q}^{(-)} [24]
[−3.14,3.18][-3.14, 3.18][−2.20,1.60][-2.20, 1.60][−1.40,0.84][-1.40, 0.84][−0.85,1.89][-0.85, 1.89][−2.68,2.94][-2.68, 2.94]

Table 2. Individual 95% CL limits on the effective couplings from top-quark processes at CMS [24, 25] and ATLAS [26, 27].

With the projected 3ab−13\mathrm{ab}^{-1} of data from the high-luminosity phase of the LHC (HL-LHC), these limits should be reduced, but the estimates in the literature vary significantly. For instance, from Tables 52 and 53 of the 2019 CERN Yellow Report, Ref. [31], we observe estimated 95% CL individual limits for some of the Wilson coefficients that are actually similar to the ones already established in Table 2. In the last two years, significantly more stringent estimates have been published in Refs. [13, 32]. We show them in Table 3. These references use the combination CtZ=cwCtW−swCtBC_{tZ}=c_wC_{tW}-s_wC_{tB}, with cw=cos⁡θWc_w=\cos\theta_W, in place of CtBC_{tB}. Similar recent estimates can also be found in Ref. [33].

CtBC_{tB}CtWC_{tW}CtGC_{tG}CφtC_{\varphi t}CφQ(1)C_{\varphi Q}^{(1)}
[31] 2019[−0.5,0.3][-0.5,0.3][−0.3,0.5][-0.3,0.5][−0.1,0.1][-0.1,0.1][−0.89,0.89][-0.89,0.89][−0.75,0.73][-0.75,0.73]
[13] 2025CtZC_{tZ} 0.70CtWC_{tW} 0.11CtGC_{tG} 0.08CφtC_{\varphi t} 0.60CtφC_{t\varphi} 1.4
[32] 2026CtZC_{tZ} 0.008CtWC_{tW} 0.007CtGC_{tG} 0.024CφtC_{\varphi t} 0.075CtφC_{t\varphi} 0.45
[32] 2026-mCtZC_{tZ} 0.28CtWC_{tW} 0.20CtGC_{tG} 0.15CφtC_{\varphi t} 2.6CtφC_{t\varphi} 2.0

Table 3. Three projected 95% CL individual limits on the effective couplings at the HL-LHC. The last row shows marginalized limits.

Comparing with the LHC bounds, we notice that the dipole couplings could get remarkably stringent limits of order 10−210^{-2} at the HL-LHC. In contrast, we observe that the limits on the Yukawa coefficient CtφC_{t\varphi} could be reduced by somewhat less than an order of magnitude. Table 3 also shows the marginalized limits for the same Wilson coefficients presented by Ref. [32] in Fig. 68. We notice a difference of one or two orders of magnitude, suggesting that the stringency of individual limits can be misleading. The MuC at 10 TeV could actually yield bounds on CtBC_{tB} and CtWC_{tW} (comparable to those on CtZC_{tZ} and CtWC_{tW}) even smaller than the projected individual limits of the HL-LHC, as we shall see below, but even if they were of similar size, the input from this collider would provide an important contribution to the overall fit.

As noted in the Introduction, top production at the MuC is not competitive for three of the coefficients: CφQ(+)C_{\varphi Q}^{(+)}, which is strongly constrained by LEP and SLC data, CtGC_{tG}, and CbWC_{bW}. For the chromomagnetic coupling CtGC_{tG}, CMS [24] obtained a bound of about ∣CtG∣<0.2\lvert C_{tG}\rvert< 0.2 in 2023, whereas a global fit performed one year later in Ref. [34] obtained a significantly smaller bound of 0.08. Furthermore, Ref. [35], a recent study of LHC ttˉt\bar{t} production at next-to-next-to-leading order (NNLO), reports an even smaller individual bound of about 0.05. At the MuC, ttˉgt\bar{t}g production could serve as a probe. We have tested this option and obtained limits of roughly 0.8 at all four energies, about one order of magnitude weaker than the recent LHC bounds. We therefore do not address the CtGC_{tG} coupling in the remainder of this article. For CbWC_{bW}, we obtain limits from single-top production (Sect. 4.5), but a recent study [36] reports much stronger limits from bbˉb\bar{b} and bbˉhb\bar{b}h production.

Top production processes: Monte Carlo simulations

We consider six top-quark production processes in this work:

μ+μ−→ttˉ,μ+μ−→ttˉh,μ+μ−→ttˉννˉ,μ+μ−→ttˉμ+μ−,μ+μ−→tbˉμ−νˉμ+tˉbμ+νμ,μ+μ−→tbˉμ−νˉμh+tˉbμ+νμh.(5)\begin{aligned} \mu^{+}\mu^{-} &\to t\bar{t}, && \\ \mu^{+}\mu^{-} &\to t\bar{t}h, && \\ \mu^{+}\mu^{-} &\to t\bar{t}\nu\bar{\nu}, && \\ \mu^{+}\mu^{-} &\to t\bar{t}\mu^{+}\mu^{-}, && \\ \mu^{+}\mu^{-} &\to t\bar{b}\mu^{-}\bar{\nu}_{\mu}+\bar{t}b\mu^{+}\nu_{\mu}, && \\ \mu^{+}\mu^{-} &\to t\bar{b}\mu^{-}\bar{\nu}_{\mu}h+\bar{t}b\mu^{+}\nu_{\mu}h. && \tag*{(5)} \end{aligned}

Illustrative unitary-gauge Feynman diagrams for the processes in Eq. (5) are provided in Figure 1–Figure 4. In Figure 1(a), we show the Feynman diagrams for top-pair production, which involve the ss-channel exchange of γ\gamma and ZZ bosons that couple to the top quark through standard model (SM) or dimension-six SMEFT couplings. Also shown in this figure are diagrams for associated top-pair production with a Higgs boson. In diagram (b), the Higgs boson is inserted onto the top-quark line via a trivalent vertex, which can originate from either the SM or the SMEFT; however, diagram (c) involves a tetravalent vertex that does not exist in the SM. Figure 2 displays the Feynman diagrams for μ+μ−→ttˉμ+μ−\mu^{+}\mu^{-} \to t\bar{t}\mu^{+}\mu^{-} [diagrams (a), (b), and (c) with f=μ−f=\mu^{-}] and for μ+μ−→ttˉννˉ\mu^{+}\mu^{-} \to t\bar{t}\nu\bar{\nu} [diagrams (a), (b), (d), and (e) with f=νe,νμ,f=\nu_e,\nu_\mu, or ντ\nu_\tau]. Only annihilation diagrams such as (a) and (b) can feature νe\nu_e or ντ\nu_\tau in the final state, and their contribution to the SM cross section is negligibly small: less than 0.2% at s=3\sqrt{s}=3 TeV and even smaller at higher energies. Vector-boson fusion (VBF) diagrams in Figure 2(d) and Figure 2(e) can only have νμ\nu_\mu in the final state; furthermore, diagram (e) contains a tetravalent vertex that does not exist in the SM.

Illustrative unitary-gauge Feynman diagrams for top-pair and associated top-pair plus Higgs production

Figure 1. Illustrative unitary-gauge Feynman diagrams for (a) top-pair production, (b), (c) associated top-pair plus Higgs production. Three types of vertices are distinguished: standard unmarked vertices represent SM couplings, solid-circle vertices indicate anomalous couplings, open-circle vertices can be either SM or anomalous.

Figure 2. Illustrative unitary-gauge Feynman diagrams for μ+μ−→ttˉμ+μ−\mu^{+}\mu^{-}\to t\bar{t}\mu^{+}\mu^{-}: (a), (b), (c) with f=μ−f=\mu^{-}; μ+μ−→ttˉννˉ\mu^{+}\mu^{-}\to t\bar{t}\nu\bar{\nu}: (a), (b), (d), (e) with f=νe,νμ,ντf=\nu_e,\nu_\mu,\nu_\tau. Graphical code for the vertices as in Figure 1.

Figure 4. Illustrative unitary-gauge Feynman diagrams for associated single-top plus Higgs production μ+μ−→tbˉμ−νˉμh\mu^{+}\mu^{-} \to t\bar{b}\mu^{-}\bar{\nu}_{\mu}h. Upper row: annihilation diagrams, lower row: vector boson fusion diagrams. Diagrams that can be obtained by inserting a Higgs line into a massive propagator line via a trivalent vertex in Figure 3 are omitted. Graphical code for the vertices as in Figure 1.

In Figure 3, we show the Feynman diagrams for the single-top production process μ+μ−→tbˉμ−νˉμ\mu^{+}\mu^{-}\to t\bar{b}\mu^{-}\bar{\nu}_{\mu}. Both annihilation and VBF diagrams are depicted, with the former dominating the cross section for s≲2 TeV\sqrt{s}\lesssim2\ \mathrm{TeV} and the latter for s≳2 TeV\sqrt{s}\gtrsim2\ \mathrm{TeV}. This crossover reflects the increasingly important role of electroweak radiation at high energies and is particularly relevant for SMEFT studies, as annihilation is sensitive to four-fermion contact operators, whereas VBF probes Higgs-gauge couplings to fermions. Feynman diagrams for the associated production of a single top quark and a Higgs boson can be obtained from the diagrams in Figure 3 by attaching a Higgs line to any massive internal line via a trivalent vertex, corresponding to either an SM or a SMEFT coupling. In Figure 4, we illustrate diagrams that cannot be obtained in this manner, as they contain a tetravalent or pentavalent SMEFT vertex that does not exist in the SM.

Figure 3. Illustrative unitary-gauge Feynman diagrams for single-top production μ+μ−→tbˉμ−νˉμ\mu^{+}\mu^{-} \to t\bar{b}\mu^{-}\bar{\nu}_{\mu}. Upper row: annihilation diagrams, lower row: vector boson fusion diagrams. Graphical code for the vertices as in Figure 1.

We simulate the processes in Eq. (5) using MadGraph5_aMC@NLO (henceforth MG5) version 3.6.7 [37]. We implemented the dimension-six SMEFT operators from Sect. 2 in MG5 by means of FeynRules version 2.3.49 [38]. Furthermore, we analyzed the events generated by MG5 using ROOT version 6.39.01 [39]. We also employed the program CalcHEP version 3.9.2 [40] with manually coded anomalous vertices to cross-check our results. For the numerical calculations in this work, we adopt α−1=127.9\alpha^{-1}=127.9, MZ=91.1876 GeVM_Z=91.1876\ \mathrm{GeV}, GF=1.16637×10−5 GeV−2G_F=1.16637\times10^{-5}\ \mathrm{GeV}^{-2} (which implies sin⁡2θW=0.2312\sin^2\theta_W=0.2312), mt=172.5 GeVm_t=172.5\ \mathrm{GeV}, mb=4.5 GeVm_b=4.5\ \mathrm{GeV}, mu=md=ms=mc=mμ=me=0m_u=m_d=m_s=m_c=m_\mu=m_e=0, θC=0.22736\theta_C=0.22736, and Λ=1 TeV\Lambda=1\ \mathrm{TeV}.

In our simulations, we always apply a rapidity cut on the final-state particles of the processes in Eq. (5):

∣y(t)∣,∣y(b)∣,∣y(h)∣<2.5,(6)|y(t)|,|y(b)|,|y(h)|<2.5, \tag*{(6)}

reflecting the tracking acceptance and, consequently, the geometric range in which bb-tagging is operational. For the processes in Eqs. (5a) and (5b), the cuts in Eq. (6) are the only ones applied. For the process in Eq. (5c), we apply Eq. (6) together with an invariant mass cut on the neutrino pair:

m(ν,νˉ)>150 GeV,(7)m(\nu,\bar{\nu})>150\ \mathrm{GeV}, \tag*{(7)}

which ensures that the neutrino pair remains away from the ZZ-boson resonance.

In the case of the processes in Eqs. (5d), (5e), and (5f), which feature muons in the final state, we define three distinct rapidity regions:

R<y0:∣y(μ)∣<y0,with y0=2.5, 4.0, 6.0.(8)R_{<y_0}: \lvert y(\mu) \rvert< y_0,\qquad\text{with } y_0 = 2.5,\ 4.0,\ 6.0. \tag*{(8)}

The phase-space region R<2.5R_{<2.5} covers the tracking facilities of the baseline central detector,4 while regions R<4.0R_{<4.0} and R<6.0R_{<6.0} correspond to hypothetical extensions of the muon detector into the forward and backward hemispheres. We also define the region R>2.5R_{>2.5} for processes where the final-state muon falls outside the assumed detector acceptance and is therefore unobserved. For the process in Eq. (5d) within regions R<2.5R_{<2.5} and R<4.0R_{<4.0}, we apply the cuts in Eq. (6) alongside:

ΔR(μ−,μ+)>0.4,m(μ−,μ+)>150 GeV,(9)\Delta R(\mu^{-},\mu^{+}) > 0.4,\qquad m(\mu^{-},\mu^{+}) > 150\ \mathrm{GeV}, \tag*{(9)}

which suppresses contributions from the ZZ resonance. For Eq. (5d) in region R<6.0R_{<6.0}, we impose Eqs. (6) and (9) in addition to:

E(μ)>500 GeV.(10)E(\mu) > 500\ \mathrm{GeV}. \tag*{(10)}

Finally, for Eq. (5d) in region R>2.5R_{>2.5}, we apply the invariant mass cut from Eq. (9), which acts as a missing mass constraint in this kinematic configuration. For the single-top quark processes in Eqs. (5e) and (5f) within regions R<2.5R_{<2.5}, R<4.0R_{<4.0}, and R<6.0R_{<6.0}, we implement the cuts from Eq. (6) along with:

m(b,μ,ν)>202 GeV,(11)m(b,\mu,\nu) > 202\ \mathrm{GeV}, \tag*{(11)}

which forces a potential leptonically decaying antitop line to remain off-shell, as appropriate for a dedicated single-top production process rather than top-pair production.

Limits from Top production processes at the MuC

To estimate the potential MuC individual limits for each operator coefficient, we use the same statistical criterion as in Ref. [12]. The signal observability is given by the statistical significance

χ=SB,S=L⋅(σSMEFT−σSM)⋅K,B=L⋅σSM⋅K,(12)\chi= \frac{S}{\sqrt{B}}, \qquad S = \mathcal{L}\cdot(\sigma_{\mathrm{SMEFT}}-\sigma_{\mathrm{SM}})\cdot K, \qquad B = \mathcal{L}\cdot\sigma_{\mathrm{SM}}\cdot K, \tag*{(12)}

where SS is the number of signal events, L\mathcal{L} the integrated luminosity, KK an efficiency factor that includes branching fractions and experimental acceptances, and BB the number of SM background events. In the case of a process with NtN_t top quarks and NHN_H Higgs bosons in the final state (where, in this paper, Nt=1,2N_t=1,2 and NH=0,1N_H=0,1), in the hadronic channel we have

K=BR⁡(t→Wb)NtBR⁡(W→jj)Nt(top-tag)NtBR⁡(h→bbˉ)NH(higgs-tag)NH,(13)K = \operatorname{BR}(t\to Wb)^{N_t}\operatorname{BR}(W\to jj)^{N_t}(\text{top-tag})^{N_t}\operatorname{BR}(h\to b\bar{b})^{N_H}(\text{higgs-tag})^{N_H}, \tag*{(13)}

where

BR⁡(t→Wb)=0.997,BR⁡(W→jj)=0.68,top-tag=0.81,\operatorname{BR}(t\to Wb)=0.997,\quad\operatorname{BR}(W\to jj)=0.68,\quad\text{top-tag}=0.81,
BR⁡(h→bbˉ)=0.53,higgs-tag=0.75.(14)\operatorname{BR}(h\to b\bar{b})=0.53,\quad\text{higgs-tag}=0.75. \tag*{(14)}

For instance, in the case of ttˉt\bar{t} production, we obtain K=0.30K=0.30. In (13b), the branching ratios are as given in [42], and the tagging efficiencies are taken from [43] (see also eq. (22) in [12]). In what follows we will consider a statistical significance χ=2\chi=2 in (12), for 95% CL limits, as in Ref. [12]. Given the luminosities in Table 1 and the SM cross sections in Table 4, we obtain the associated 1σ1\sigma cross-section uncertainties from (12) as ϵσ=Δσ/σSM=(χ/B)∣χ=1=1/L⋅σSM⋅K\epsilon_{\sigma}=\Delta\sigma/\sigma_{\mathrm{SM}}=(\chi/\sqrt{B})|_{\chi=1}=1/\sqrt{\mathcal{L}\cdot\sigma_{\mathrm{SM}}\cdot K}, for each process and energy. For clarity, in Table 4 we include also the numerical results for the 2σ2\sigma uncertainties.

μ+μ−→X\mu^{+}\mu^{-} \to X3 TeV6 TeV10 TeV14 TeV
σSM\sigma_{\mathrm{SM}}2εσ2\varepsilon_{\sigma}σSM\sigma_{\mathrm{SM}}2εσ2\varepsilon_{\sigma}σSM\sigma_{\mathrm{SM}}2εσ2\varepsilon_{\sigma}σSM\sigma_{\mathrm{SM}}2εσ2\varepsilon_{\sigma}
ttˉht\bar{t}h0.4030.50.1327.10.05325.20.03024.0
ttˉt\bar{t}19.332.84.842.81.752.80.892.8
tbˉμ−νˉμ [R<2.5]t\bar{b}\mu^{-}\bar{\nu}_{\mu}\ [R<2.5]2.465.71.583.61.012.70.712.3
tbˉμ−νˉμ [R<4.0]t\bar{b}\mu^{-}\bar{\nu}_{\mu}\ [R<4.0]5.283.95.461.94.821.24.140.9
tbˉμ−νˉμ [R<6.0]t\bar{b}\mu^{-}\bar{\nu}_{\mu}\ [R<6.0]6.753.59.321.510.380.810.680.6
ttˉμ+μ− [R<2.5]t\bar{t}\mu^{+}\mu^{-}\ [R<2.5]0.09339.90.04329.30.02125.10.01322.7
ttˉμ+μ− [R<4.0]t\bar{t}\mu^{+}\mu^{-}\ [R<4.0]0.9012.80.677.40.376.00.225.5
ttˉμ+μ− [R<6.0]t\bar{t}\mu^{+}\mu^{-}\ [R<6.0]2.058.53.003.53.002.12.771.6
ttˉμ+μ− [R>2.5]t\bar{t}\mu^{+}\mu^{-}\ [R>2.5]7.034.613.801.618.650.821.520.6
ttˉννˉt\bar{t}\nu\bar{\nu}3.866.27.292.29.681.211.020.8
ttˉ(μ+μ−+ννˉ)t\bar{t}(\mu^{+}\mu^{-}+\nu\bar{\nu})10.893.721.091.328.330.732.540.5
tbˉμ−νˉμh [R<2.5]t\bar{b}\mu^{-}\bar{\nu}_{\mu}h\ [R<2.5]0.012129.80.008677.10.006254.50.004744.4
tbˉμ−νˉμh [R<4.0]t\bar{b}\mu^{-}\bar{\nu}_{\mu}h\ [R<4.0]0.019103.80.02148.70.02129.80.01922.3
tbˉμ−νˉμh [R<6.0]t\bar{b}\mu^{-}\bar{\nu}_{\mu}h\ [R<6.0]0.014119.40.03140.30.04320.70.04813.9

Table 4. SM cross sections σSM\sigma_{\mathrm{SM}} in fb, computed with MG5, and their 2σ2\sigma relative uncertainties 2εσ2\varepsilon_{\sigma} in %.

In the following subsections we address each one of the top production processes and the individual limits obtained for each WC. Given a certain operator, there are usually one or two processes that yield the most sensitivity. On the other hand, given a certain process, there are some operators that are particularly sensitive to it and others that are not. To simplify the presentation, not all the WC bounds coming from a certain process are shown, but only the ones for which the best limits are obtained. The limits from the five most sensitive processes for each coefficient and energy are collected in Appendix § 7, except for CbWC_{bW} (see Sect. 4.5). The Appendix also shows the effect of an assumed 2% systematic uncertainty, which can be significant for processes with large cross sections, and hence small statistical uncertainties.

Limits from ss-channel ttˉt\bar{t} production

We first consider ttˉt\bar{t} production. As we go from s=3\sqrt{s}=3 TeV to 14 TeV, the SM cross section is reduced by an order of magnitude, but the luminosity also grows by an order of magnitude, so that the 2σ2\sigma uncertainty remains constant at 2.8%, see Table 4. Only two of the four coefficients that can be constrained from this process, CφQ(−)C_{\varphi Q}^{(-)}, CφtC_{\varphi t}, CtBC_{tB}, and CtWC_{tW}, get significant limits: the dipole coefficients CtBC_{tB} and CtWC_{tW}. The ttZttZ and ttγtt\gamma couplings from the dipole operators QuBQ_{uB} and QuWQ_{uW} are proportional to the ZZ-boson and photon momenta; thus, not surprisingly, some of the best limits for CtBC_{tB} and CtWC_{tW} at high energy come from this process. The ttZttZ couplings from QφQ(−)Q_{\varphi Q}^{(-)} and QφtQ_{\varphi t} are not momentum-dependent, and the competitive limits do not come from this process. For CφtC_{\varphi t}, the limits are greater than the current ones shown in Table 2. For CφQ(−)C_{\varphi Q}^{(-)}, the limits are of order 1 (a third of the current bounds), yet they are about an order of magnitude greater than what we obtain from ttˉt\bar{t} production with neutrinos. That is the subject of section 4.3.

Regarding previous reports on limits on the dipole coefficients from ss-channel ttˉt\bar{t} production, other authors have also found that this process yields competitive bounds. In Table 5 we show our limits as well as the limits presented in Refs. [12, 13]. Ref. [12] provides one lower limit on Λ/CtB\Lambda/\sqrt{C_{tB}} and on Λ/CtW\Lambda/\sqrt{C_{tW}}, and we show the corresponding upper limit on C/Λ2C/\Lambda^{2} with Λ=1\Lambda=1 TeV. The authors in [13] also provide only one upper bound. Since we are using the same criterion for the cross-section uncertainties as Ref. [12], it is expected that our limits should coincide with theirs. However, in [12] the authors include a correction from initial-state radiation (ISR), which tends to increase the ttˉt\bar{t} cross section by a small amount. This is why their limits are also slightly smaller. The coefficients CtBC_{tB} and CtWC_{tW} are, in general, complex. We provide the limits on the imaginary parts of all the WC in the Appendix. In [12], there are limits for CtBiC_{tBi} given at s=3,10\sqrt{s}=3,10 TeV, and the bounds we obtain are again consistent with theirs. For the real parts at 3 TeV, there is a second allowed interval along each axis, for both CtWrC_{tWr} and CtBrC_{tBr} (see Figure 5); the tabulated intervals are those containing the SM point.

CtWrC_{tW r}CtBrC_{tB r}CtWrC_{tW r} [12]CtBrC_{tB r} [12]CtWrC_{tW r} [13]
ttˉt\bar{t} − 3 TeV[−0.029,+0.053][-0.029,+0.053][−0.023,+0.038][-0.023,+0.038]0.0260.0220.028
ttˉt\bar{t} − 6 TeV[−0.022,+0.062][-0.022,+0.062][−0.018,+0.051][-0.018,+0.051]−−−−−−
ttˉt\bar{t} − 10 TeV[−0.016,+0.031][-0.016,+0.031][−0.013,+0.025][-0.013,+0.025]0.0160.0130.015
ttˉt\bar{t} − 14 TeV[−0.013,+0.020][-0.013,+0.020][−0.010,+0.016][-0.010,+0.016]−−−−−−

Table 5. Individual limits on the dipole coefficients CtWrC_{tW r} and CtBrC_{tB r} from μ+μ−→ttˉ\mu^{+}\mu^{-} \to t\bar{t}. The limits correspond to 2ϵσ=2.8%2\epsilon_{\sigma}=2.8\% for all values of s\sqrt{s}.

Figure 5. Allowed regions at 95% CL for the real parts of the Wilson coefficients CtWC_{tW} and CtBC_{tB}. Individual limits are indicated by the light-red dots, and marginalized ones by the dashed black lines.

Top pair plus Higgs production μ+μ−→ttˉh\mu^{+}\mu^{-} \to t\bar{t}h

In Figure 1(b) and (c), we show two sample diagrams of the ss-channel ttˉht\bar{t}h production mode. In addition to the potential contributions from the same four couplings as in the previous process, the Yukawa coupling also contributes, as suggested by diagram (b):

yt=1+δyt=1−v2mt(vΛ)2Ctφ=1−Ctφ16.4.(15)y_t = 1+\delta y_t = 1-\frac{v}{\sqrt{2}m_t}\left(\frac{v}{\Lambda}\right)^2 C_{t\varphi}=1-\frac{C_{t\varphi}}{16.4}. \tag*{(15)}

It is natural to expect that this production mode is the most sensitive to the top-Higgs Yukawa coupling. In 2022, the authors of Ref. [15] obtained bounds on δyt\delta y_t based on the ss-channel ttˉht\bar{t}h production at 3 TeV and also based on VBF ttˉht\bar{t}h production at 10 TeV. Their study included a detailed analysis of signal versus background for both cases, and they found that the precision for the Yukawa measurement would be at best about ∼50%\sim50\%. This is equivalent to an upper bound on CtφC_{t\varphi} of about 8.2. At s=10\sqrt{s}=10 TeV, we obtain bounds in the interval [−2.5,+2.9][-2.5,+2.9], significantly stronger than the 8.2 bound above, but still somewhat weaker than the current limits from ATLAS listed in Table 2. In subsequent articles [44, 45], it was reported that the process most sensitive to δyt\delta y_t is ttˉνμνˉμt\bar{t}\nu_\mu\bar{\nu}_\mu production. In this case the attainable precision improves by about an order of magnitude. We will refer to this process in the next section.

Surprisingly, at high energies the ss-channel ttˉht\bar{t}h process provides the most stringent bounds on the dipole operators QtBQ_{tB} and QtWQ_{tW}. This occurs despite the lower SM cross section and the resulting large cross-section uncertainty (see Table 4) compared to ttˉt\bar{t} production [12]. We note that Ref. [11] also considers this mode (along with ttˉt\bar{t}) to obtain limits on four-fermion couplings. In Table 6, we show the limits on CtBC_{tB} and CtWC_{tW} obtained from this process. The limits given in Refs. [12, 13] are also shown. As in the case of ttˉt\bar{t}, our limits agree with those of Ref. [12]. This is also true for the imaginary part of CtBC_{tB}. In fact, at all energies the best limits on the imaginary parts CtBiC_{tBi} and CtWiC_{tWi} come from ss-channel ttˉht\bar{t}h production. Nevertheless, as we will see below, there are other processes, such as single-top and single-top-plus-Higgs production, that yield less stringent but still competitive bounds on the dipole coefficients.

The process μ+μ−→ttˉννˉ\mu^{+}\mu^{-} \to t\bar{t}\nu\bar{\nu}

In the effective W approximation (EWA), this process originates from the VBF subprocess W+W−→ttˉW^{+}W^{-} \to t\bar{t}. It is well known that, in addition, the ZZ(γ)→ttˉZZ(\gamma) \to t\bar{t} contribution must be included for events in which the final-state muons are not detected. However, before addressing the additional contribution, it is instructive to see what sensitivity we obtain for the W+W−W^{+}W^{-} mode alone. As mentioned in the previous section, this process is more sensitive to the Yukawa coupling than ttˉht\bar{t}h production at s≥6 TeV\sqrt{s} \ge6\ \mathrm{TeV}, and for the imaginary part at all energies. The limit ∣Ctϕ∣≲1\lvert C_{t\phi}\rvert\lesssim1 in Table 7 at 10 TeV is equivalent to a variation of about 6.5% for the Yukawa coefficient. This is consistent with the limit of 5.6% for δyt\delta y_t given in Ref. [44], where the enhanced sensitivity comes from analyzing the distribution of the scattering angle between the top and the W+W^{+} boson.

In a subsequent study, Ref. [45] reports an even smaller 95% CL limit of 3% based on two kinematic distributions: the ttˉt\bar{t} invariant mass and the polar angle of tt. Furthermore, Ref. [45] considers both the semileptonic and the hadronic decay modes of the top-quark pair, whereas Ref. [44] uses only the semileptonic mode. In the approach of Ref. [45], the partonic cross sections for both processes W+W−→ttˉW^{+}W^{-} \to t\bar{t} and ZZ(γ)→ttˉZZ(\gamma) \to t\bar{t} are calculated and then convolved with the muon PDF [1]. The limit from Ref. [45] translates to ∣Ctϕ∣≲0.5\lvert C_{t\phi}\rvert\lesssim0.5, which is about half of what we obtain. The authors of [45] point out that the sensitivity is dominated by the W+W−W^{+}W^{-} mode, a result that is also consistent with the weaker limits we obtain from ttˉμ+μ−t\bar{t}\mu^{+}\mu^{-} production, as we shall see below.

More recently, Ref. [46] studied the Yukawa coupling in the Higgs-associated production process μ+μ−→ttˉνμνˉμh\mu^{+}\mu^{-} \to t\bar{t}\nu_{\mu}\bar{\nu}_{\mu}h, obtaining a 2σ2\sigma limit of 4.9% on δyt\delta y_t at s=10 TeV\sqrt{s}=10\ \mathrm{TeV}. Their analysis is based on the full matrix element but without including top decay (as we do here). However, they also re-evaluate this limit including top decay in the leptonic and semileptonic channels (at the partonic level) and obtain a weaker bound that is twice as large.

As for the imaginary part CtϕiC_{t\phi i} of the Yukawa coupling, the process ttˉννˉt\bar{t}\nu\bar{\nu} provides a bound of about 1.2 at s=10 TeV\sqrt{s}=10\ \mathrm{TeV} (see Figure 8), which increases to 1.5 when the untagged-muon contribution is added. In Ref. [47], a study based on the ttˉνμνˉμht\bar{t}\nu_{\mu}\bar{\nu}_{\mu}h and single-top-plus-Higgs final states uses a CP-violation-sensitive angular variable that directly tests the imaginary coefficient. The analysis includes event reconstruction and signal-versus-background separation, and the authors obtain a 2σ2\sigma limit of ∣Ctϕi∣≤4\lvert C_{t\phi i}\rvert\le4, weaker than the one we obtain.

Figure 8. Individual limits on the real and imaginary parts of the Wilson coefficients CtφC_{t\varphi} and CφtbC_{\varphi tb}. The label “ttνμνˉμtt\nu_\mu\bar{\nu}_\mu” refers to the process of Eq. (5c); the contributions of νe\nu_e and ντ\nu_\tau are negligible. The label “ttpmissttp_{\mathrm{miss}}” refers to the process μ+μ−→ttˉμ+μ−+ttˉννˉ\mu^+\mu^- \to t\bar{t}\mu^+\mu^- + t\bar{t}\nu\bar{\nu} with ∣y(μ)∣>2.5|y(\mu)| > 2.5. Color code as in Figure 7.

Besides the Yukawa coefficient, we have found that the vector left- and right-handed tZtZ couplings CφQ(−)C_{\varphi Q}^{(-)} and CφtC_{\varphi t} also get their best bounds from the ttˉννˉt\bar{t}\nu\bar{\nu} process. Notice that for CφtC_{\varphi t} at 10 TeV, the bound is more than an order of magnitude (about a factor of 40) smaller than the current LHC limits. As we will see in the next section, when the contribution from ttˉμ+μ−t\bar{t}\mu^{+}\mu^{-} production with untagged forward muons is added, the sensitivity to CφQ(−)C_{\varphi Q}^{(-)} barely changes, but the limits on CφtC_{\varphi t} become weaker by factors of about 3 to 7, and those on CtϕC_{t\phi} by about 30%.

The process μ+μ−→ttˉμ+μ−\mu^{+}\mu^{-} \to t\bar{t}\mu^{+}\mu^{-}

We have found that this process, which involves tagging the final-state muons, is not very sensitive to any of the couplings considered here. At most, we obtain second-best limits for CφtC_{\varphi t}, and among the best five for CφQ(−)C_{\varphi Q}^{(-)}. Even then, those bounds are significantly weaker than the ones from the previous case μ+μ−→ttˉννˉ\mu^{+}\mu^{-} \to t\bar{t}\nu\bar{\nu}. Moreover, the requirement that the outgoing muons appear in the central region ∣y∣<2.5\lvert y\rvert< 2.5 greatly reduces the sensitivity. Only if we allow for detection at high rapidities do we obtain bounds for CφQ(−)C_{\varphi Q}^{(-)} and CφtC_{\varphi t} stronger than the current LHC limits. The limits for ∣y∣<2.5|y| < 2.5 are either at least three times larger than the current LHC bounds or about an order of magnitude larger than the limits for ∣y∣<4|y| < 4 or ∣y∣<6|y| < 6. Since they are not competitive, they are omitted from Table 8.

CφQ(−)C_{\varphi Q}^{(-)}CφtC_{\varphi t}CtφrC_{t\varphi r}
3 TeV [R<4.0][R<4.0][−0.73,+1.01][-0.73,+1.01][−3.30,+1.91][-3.30,+1.91][−7.34,+15.1][-7.34,+15.1]
3 TeV [R<6.0][R<6.0][−1.16,+1.36][-1.16,+1.36][−1.74,+1.40][-1.74,+1.40][−8.01,+16.1][-8.01,+16.1]
6 TeV [R<4.0][R<4.0][−0.41,+0.47][-0.41,+0.47][−1.81,+1.66][-1.81,+1.66][−4.51,+11.4][-4.51,+11.4]
6 TeV [R<6.0][R<6.0][−0.46,+0.50][-0.46,+0.50][−0.70,+0.59][-0.70,+0.59][−3.02,+8.78][-3.02,+8.78]
10 TeV [R<4.0][R<4.0][−0.35,+0.41][-0.35,+0.41][−2.16,+1.31][-2.16,+1.31][−4.59,+11.80][-4.59,+11.80]
10 TeV [R<6.0][R<6.0][−0.26,+0.27][-0.26,+0.27][−0.41,+0.35][-0.41,+0.35][−1.62,+6.34][-1.62,+6.34]
14 TeV [R<4.0][R<4.0][−0.31,+0.36][-0.31,+0.36][−2.26,+1.40][-2.26,+1.40][−5.35,+13.2][-5.35,+13.2]
14 TeV [R<6.0][R<6.0][−0.19,+0.20][-0.19,+0.20][−0.30,+0.27][-0.30,+0.27][−1.16,+5.38][-1.16,+5.38]

Table 8. Individual limits on coefficients CφQ(−)C_{\varphi Q}^{(-)}, CφtC_{\varphi t} and CtφrC_{t\varphi r} from the production mode ttˉμ+μ−t\bar{t}\mu^{+}\mu^{-}. The limits correspond to the cross-section uncertainties given in Table 4.

Although this process is less sensitive, it must be added to the ttˉννˉt\bar{t}\nu\bar{\nu} signal when the outgoing muons escape detection. Assuming a muon detector that covers the region ∣y(μ±)∣<2.5|y(\mu^{\pm})| < 2.5, we have re-evaluated the limits from ttˉννˉt\bar{t}\nu\bar{\nu} by including ttˉμ+μ−t\bar{t}\mu^{+}\mu^{-} with both muons satisfying ∣y(μ±)∣>2.5|y(\mu^{\pm})| > 2.5. We show the new limits obtained from this process, which is dominated by VBF, in Table 9. Comparing with the 10 TeV results in Table 7, we observe that the sensitivity to CφQ(−)C_{\varphi Q}^{(-)} is essentially unchanged, while the limits on CφtC_{\varphi t} and CtφC_{t\varphi} become weaker by factors of about 3 and 1.3, respectively.

CφQ(−)C_{\varphi Q}^{(-)}CφtC_{\varphi t}CtφrC_{t\varphi r}
3 TeV[−0.54,+0.58][-0.54,+0.58][−0.86,+2.71][-0.86,+2.71][−4.30,+5.69][-4.30,+5.69]
6 TeV[−0.19,+0.19][-0.19,+0.19][−0.25,+1.29][-0.25,+1.29][−2.01,+3.14][-2.01,+3.14]
10 TeV[−0.10,+0.10][-0.10,+0.10][−0.11,+0.20][-0.11,+0.20][−1.26,+2.23][-1.26,+2.23]
14 TeV[−0.070,+0.070][-0.070,+0.070][−0.070,+0.12][-0.070,+0.12][−0.97,+1.81][-0.97,+1.81]
Cϕtb,rC_{\phi tb,r}, ∣y∣<6.0|y| < 6.0CtB,rC_{tB,r}, ∣y∣<2.5|y| < 2.5CtW,rC_{tW,r}, ∣y∣<2.5|y| < 2.5CbW,rC_{bW,r}, ∣y∣<2.5|y| < 2.5
3 TeV[−2.14,+2.11][-2.14,+2.11][−0.097,+0.15][-0.097,+0.15][−0.080,+0.21][-0.080,+0.21][−0.13,+0.14][-0.13,+0.14]
6 TeV[−0.76,+0.69][-0.76,+0.69][−0.038,+0.041][-0.038,+0.041][−0.034,+0.059][-0.034,+0.059][−0.046,+0.047][-0.046,+0.047]
10 TeV[−0.35,+0.31][-0.35,+0.31][−0.017,+0.016][-0.017,+0.016][−0.016,+0.023][-0.016,+0.023][−0.020,+0.021][-0.020,+0.021]
14 TeV[−0.22,+0.20][-0.22,+0.20][−0.010,+0.009][-0.010,+0.009][−0.010,+0.012][-0.010,+0.012][−0.011,+0.011][-0.011,+0.011]

Table 9. Individual limits on coefficients CφQ(−)C_{\varphi Q}^{(-)}, CφtC_{\varphi t} and CtφrC_{t\varphi r} from the process ttˉννˉ+ttˉμ+μ−t\bar{t}\nu\bar{\nu}+t\bar{t}\mu^{+}\mu^{-} with ∣y(μ±)∣>2.5|y(\mu^{\pm})| > 2.5. The limits correspond to the cross-section uncertainties given in Table 4.

Single-top production μ+μ−→tbˉμ−νˉμ+tbμˉ+νμ\mu^{+}\mu^{-} \to t\bar{b}\mu^{-}\bar{\nu}_{\mu}+t b\bar{\mu}^{+}\nu_{\mu}

Single-top production has been considered for an e+e−e^{+}e^{-} collider at energies of 0.5, 1, and 3 TeV [48], but it has not been addressed in the literature for the higher energies reached by the MuC. In our analysis, we observe that single-top production provides the strongest limits on the right-handed tbWtbW coupling CφtbC_{\varphi tb}. The limits on the dipole couplings CtBC_{tB}, CtWC_{tW} and CbWC_{bW} are not the strongest, but they improve on the current LHC limits in Table 2: for CbWC_{bW} at all energies, and for CtBC_{tB} and CtWC_{tW} from 6 TeV on,

with intervals narrower by factors of about 2–3 at 6 TeV and 5–13 at 10 and 14 TeV. Our results are shown in Table 10. In Ref. [48], at 3 TeV, the limits on CϕtbC_{\phi tb} were established as ±3.1\pm3.1 for a cross-section uncertainty of 5%. This limit is similar to the one we obtain at 3 TeV with ∣y∣<2.5|y| < 2.5 at the MuC.

The limits presented in Table 10 depend on the muon rapidity range. We show the limits for the range that gives the best result (for CϕtbC_{\phi tb} at 3 TeV, the range ∣y∣<4|y| < 4 is marginally better; see Figure 8); those for the other ranges are larger, in some cases only slightly. Notice that the limits on CtWC_{tW} and CbWC_{bW} are similar, both below 10−110^{-1}. Both operators contribute to single-top production via the tbWtbW coupling, with QtWQ_{tW} involving a left-handed bb quark and QbWQ_{bW} a right-handed one. The interference with the SM amplitude for QbWQ_{bW} is suppressed by mbm_b because of the chirality flip. However, the contribution to the amplitude squared is dominated by the term proportional to CbW2C_{bW}^{2}, which we find to be similar in size to the term proportional to CtW2C_{tW}^{2}. The right-handed charged-current operator QϕtbQ_{\phi tb} lacks the dependence on the WW-boson momentum that the dipole operators generate in the tbWtbW vertex, and its contribution to the amplitude is significantly weaker than that of the dipole operators. The resulting limits are, as expected, much larger.

A very recent study of the potential sensitivity of the HL-LHC to this coupling, using bWbW spin correlations [49], projects a bound on the right-handed tbWtbW form factor of ∣VR∣<0.037|V_R| < 0.037, which translates to ∣Cϕtb∣=2Λ2/v2∣VR∣<1.22|C_{\phi tb}| = 2\Lambda^{2}/v^{2}|V_R| < 1.22. If muon tagging extends to ∣y∣<6|y| < 6, the MuC at 10 TeV could set a bound about a third of that value, as seen in Table 10. For ∣y∣<2.5|y| < 2.5, the bound at that energy would be about 1.1, which is similar to their prediction.

For the bottom-quark dipole operator QbWQ_{bW}, the strongest limits on CbWC_{bW} come from bbˉb\bar{b} and bbˉhb\bar{b}h production. A recent study, Ref. [36], provides 95% CL limits on CbWC_{bW} and CbBC_{bB} of order 10−210^{-2} or smaller, as is the case for the dipole coefficients CtWC_{tW} and CtBC_{tB} with ttˉht\bar{t}h production. For CbWC_{bW}, they read:

−0.030≤CbW,r≤+0.028(s=3 TeV),-0.030 \leq C_{bW,r} \leq+0.028 \qquad(\sqrt{s}=3\ \mathrm{TeV}),
−0.0024≤CbW,r≤+0.0020(s=10 TeV).-0.0024 \leq C_{bW,r} \leq+0.0020 \qquad(\sqrt{s}=10\ \mathrm{TeV}).

Single-top production plus Higgs

The bounds on WCs obtained from single-top-plus-Higgs production are shown in Table 11. They show the same relative hierarchy of bounds as in single-top production (see Table 10), and the bounds themselves are similar for both processes. However, the nature of those bounds is different: the single-top process benefits from relatively large cross sections and low backgrounds, resulting in small cross-section uncertainties, as shown in Table 4, whereas the single-top-plus-Higgs cross section depends on the WC much more strongly than that of any other process except top-pair-plus-Higgs production, but, being small, leads to large statistical uncertainties. These two effects partially cancel, so that single-top-plus-Higgs production ends up setting limits similar to those from single-top production, as shown in Tables 10 and 11. Consequently, if a systematic uncertainty were added in quadrature to the statistical ones in Table 4, the total uncertainty for single-top production would increase, weakening its limits

Cϕtbr,∣y∣<6.0C_{\phi tb r}, |y| < 6.0CtBr,∣y∣<2.5C_{tB r}, |y| < 2.5CtWr,∣y∣<2.5C_{tW r}, |y| < 2.5CbWr,∣y∣<2.5C_{bW r}, |y| < 2.5
3 TeV[−4.29,+4.20][-4.29, +4.20][−0.14,+0.22][-0.14, +0.22][−0.13,+0.24][-0.13, +0.24][−0.20,+0.20][-0.20, +0.20]
6 TeV[−1.21,+1.18][-1.21, +1.18][−0.043,+0.061][-0.043, +0.061][−0.039,+0.063][-0.039, +0.063][−0.052,+0.053][-0.052, +0.053]
10 TeV[−0.51,+0.50][-0.51, +0.50][−0.017,+0.023][-0.017, +0.023][−0.015,+0.023][-0.015, +0.023][−0.020,+0.020][-0.020, +0.020]
14 TeV[−0.29,+0.28][-0.29, +0.28][−0.009,+0.012][-0.009, +0.012][−0.008,+0.012][-0.008, +0.012][−0.010,+0.010][-0.010, +0.010]

caption: Table 11: Individual limits on the coefficients CϕtbrC_{\phi tb r}, CtBrC_{tB r}, CtWrC_{tW r}, and CbWrC_{bW r} from the single-top production plus Higgs modes tbˉμ−νˉμh+tˉbμ+νμht\bar{b}\mu^{-}\bar{\nu}_{\mu}h + \bar{t}b\mu^{+}\nu_{\mu}h. The range of ∣y(μ±)∣|y(\mu^{\pm})| shown is the one that gives the best limits (some of the other rapidity ranges are shown in Figure 7 and Figure 8). The limits correspond to the cross-section uncertainties given in Table 4.

:::

on the WCs, whereas the total uncertainty for single-top-plus-Higgs, being statistically dominated, would remain essentially unchanged, and so would the limits in Table 11. For instance, for single-top production at 14 TeV with ∣y∣<6|y| < 6, a 2% systematic uncertainty would increase the total 2σ2\sigma uncertainty from 0.6% to 4.0%, whereas for single-top-plus-Higgs production it would merely change from 13.9% to 14.5%. The limits for an assumed systematic uncertainty of 2% are shown in Figure 7–Figure 9 of Appendix § 7.

Individual limits on the Wilson coefficients $C_{\varphi Q}^{(-)}$ and $C_{\varphi t}$ for $\sqrt{s}=3$, $6$, $10$, and $14$ TeV

Figure 9. Individual limits on the Wilson coefficients CφQ(−)C_{\varphi Q}^{(-)} and CφtC_{\varphi t}. Color code as in Figure 7. The labels “ttˉνμνˉμt\bar{t}\nu_{\mu}\bar{\nu}_{\mu}” and “ttˉpmisst\bar{t}p_{\mathrm{miss}}” as defined in Figure 8.

Allowed regions and marginalized limits for CtBC_{tB} and CtWC_{tW}

In this section we report two-dimensional allowed regions for the electroweak dipole Wilson coefficients CtBC_{tB} and CtWC_{tW}, the operators to which we find the strongest sensitivity. The allowed regions for the real and imaginary parts are reported separately: Figure 5 shows the allowed regions in the real-parts plane CtWrC_{tW r}–CtBrC_{tB r}, and Figure 6 those in the imaginary-parts plane CtWiC_{tW i}–CtBiC_{tB i}, in both cases for the four energies s=3\sqrt{s} = 3, 6, 10, and 14 TeV. The allowed regions at 2σ2\sigma confidence level are bounded by ellipses defined by σ(CtW,CtB)/σSM=1±2ϵσ\sigma(C_{tW}, C_{tB})/\sigma_{\mathrm{SM}} = 1 \pm2\epsilon_{\sigma}, where ϵσ\epsilon_{\sigma} is the cross-section uncertainty from Table 4, as explicitly indicated on the ellipses in the figures. For the real parts at s=3\sqrt{s} = 3 TeV, the allowed region is an elliptical annulus, whereas for the remaining energies, and for the imaginary parts at all energies, it is a solid ellipse.

Figure 6. Allowed regions at 95% CL for the imaginary parts of the Wilson coefficients CtWC_{tW} and CtBC_{tB}. Individual limits are indicated by the light-red dots, and marginalized ones by the dashed black lines.

The allowed regions are computed for the process that yields the best individual limits at each energy. For the real parts (Figure 5), these are the limits from ttˉt\bar{t} production at s=3\sqrt{s} = 3 TeV, see Table 5 and Figure 7, and from ttˉht\bar{t}h production at the three higher energies, see Table 6 and Figure 7. For the imaginary parts (Figure 6), the best limits are set by ttˉht\bar{t}h production at all energies, see Figure 7. In the figures, the extremal points of the ellipses, indicated by light-blue dots, determine the marginalized limits on the couplings, as shown by the dashed lines. The intersections of the ellipses with the coordinate axes, shown by light-red dots, correspond to the individual limits given in Table 5 and Table 6 and in Figure 7.

The different shapes of the allowed regions can be understood as follows. The amplitudes corresponding to the real parts CtWrC_{tW r} and CtBrC_{tB r} interfere significantly with the SM amplitude, which produces a noticeable asymmetry between the lower and upper limits in Table 5 and Table 6. If the interference were negligible or zero, as is the case for CtWiC_{tW i} and CtBiC_{tB i}, there would be no destructive interference, the cross section could only grow with the effective coupling, and the lower and upper limits would have the same size. If the interference is strong enough, the minimum of σ/σSM\sigma/\sigma_{\mathrm{SM}} can lie below the lower edge of the allowed band, 1−2ϵσ1 - 2\epsilon_{\sigma}, as happens for ttˉt\bar{t} production at s=3\sqrt{s} = 3 TeV. In that case, as the Wilson coefficient grows, the cross section first drops below the band, then rises again and re-enters it, so that two distinct intervals appear along each axis, and the allowed region is an elliptical annulus (Figure 5). At s=6\sqrt{s} = 6, 10, and 14 TeV, the best limits come from ttˉht\bar{t}h production. Its amplitude also interferes strongly with the SM, but its cross-section uncertainty is so large that the minimum of σ/σSM\sigma/\sigma_{\mathrm{SM}} stays above 1−2ϵσ1 - 2\epsilon_{\sigma}, and the allowed region is a solid ellipse (see Table 4).

As an additional observation, ttˉht\bar{t}h production is more sensitive than ttˉt\bar{t} production at higher energies, despite its much larger cross-section uncertainty. This is because of a chiral suppression of order mt2/sm_t^2/s in ttˉt\bar{t}, which is lifted in ttˉht\bar{t}h by the additional chirality flip from the Yukawa coupling.

Final remarks

We have estimated individual limits on the Wilson coefficients of the dimension-six operators of the Warsaw basis [5] that generate top-quark–electroweak-boson couplings at a muon collider. Of the nine fermion-boson coefficients, we focus on six; for CφQ(+)C_{\varphi Q}^{(+)} (LEP and SLC), CtGC_{tG} (LHC), and CbWC_{bW} (bbˉb\bar{b} and bbˉhb\bar{b}h production), top production at the MuC is not competitive with existing limits. We have considered the most important tree-level production modes with top quarks in the final state, at center-of-mass energies of 3, 6, 10, and 14 TeV, with integrated luminosities L=Ecm2/10 ab−1\mathcal{L} = E_{\mathrm{cm}}^2/10\ \mathrm{ab}^{-1}. The limits were estimated from 2σ2\sigma cross-section uncertainties, corresponding to 95% CL, for muon rapidity ranges ∣y∣<2.5\lvert y\rvert< 2.5, 4, and 6 in the processes with neutral-gauge-boson fusion diagrams.

The electroweak dipole coefficients CtBC_{tB} and CtWC_{tW} are the couplings to which we find the strongest sensitivity, see Table 5 in Sect. 4.1 and Table 6 in Sect. 4.2, where we also provide a comparison to the limits in the previous literature. For these dipole coefficients we have also provided two-dimensional allowed regions and marginalized limits in Sect. 4.7. Limits on the coefficients CφQ(−)C_{\varphi Q}^{(-)}, CφtC_{\varphi t}, CtφC_{t\varphi} and CφtbC_{\varphi tb} are provided in Table 7–11 in Sect. 4.3–4.6. Furthermore, the individual limits on those six coefficients, for both the real and imaginary parts of the complex ones, are collected in Appendix § 7, where we give the five most sensitive processes in each case, together with the effect of an assumed systematic uncertainty. The limits on CbWC_{bW} from top production are omitted there because they are weaker by factors of about 5 to 10 than those from bbˉb\bar{b} and bbˉhb\bar{b}h production in the literature, as shown in Table 10 and discussed in Sect. 4.5. Our main findings are summarized in the following list.

  1. For the Yukawa coefficient CtφC_{t\varphi}, the most sensitive process at s≥6\sqrt{s} \ge6 TeV is ttˉννˉt\bar{t}\nu\bar{\nu} production, in agreement with previous studies [44, 45]; at 3 TeV, ttˉht\bar{t}h production is more sensitive for the real part.

  1. The ss-channel processes ttˉt\bar{t} and ttˉht\bar{t}h provide the most stringent bounds on the dipole couplings CtBC_{tB} and CtWC_{tW}: ttˉt\bar{t} production at s=3\sqrt{s}=3 TeV for the real parts, and ttˉht\bar{t}h production otherwise. This is in agreement with the conclusion of Ref. [12]. In addition, single-top and single-top-plus-Higgs production provide bounds on the dipole couplings that are more stringent than the current LHC limits at s≥6\sqrt{s} \ge6 TeV, and for CbWC_{bW} at all energies. Compared with the current CMS intervals in Table 2, the allowed intervals for these dipole couplings are narrower by factors of about 3 to 6 at 3 and 6 TeV, and by an order of magnitude or more at 10 and 14 TeV.

  1. The left- and right-handed ttZttZ couplings CφQ(−)C_{\varphi Q}^{(-)} and CφtC_{\varphi t} obtain their best bounds from ttˉννˉt\bar{t}\nu\bar{\nu} production. These bounds are narrower than the current LHC limits by factors of about 4 to 5 at 3 TeV, and by more than an order of magnitude from 6 TeV on, provided that the forward muons are tagged, so that the ttˉμ+μ−t\bar{t}\mu^{+}\mu^{-} events can be separated. If the muons are not tagged, the sensitivity to CφQ(−)C_{\varphi Q}^{(-)} is essentially unchanged, but the allowed interval for CφtC_{\varphi t} is essentially no narrower than the LHC one at 3 TeV and narrower by a factor of about 2.5 at 6 TeV, growing to more than an order of magnitude at 10 and 14 TeV.

  1. The process μ+μ−→ttˉμ+μ−\mu^{+}\mu^{-} \to t\bar{t}\mu^{+}\mu^{-} is not very sensitive to any of the couplings we have considered. However, when the outgoing muons escape detection (∣y(μ±)∣>2.5|y(\mu^{\pm})| > 2.5), this process adds to ttˉννˉt\bar{t}\nu\bar{\nu} production,

and the sensitivity of the combined process is somewhat degraded compared to that of ttˉννˉt\bar{t}\nu\bar{\nu} alone (see item (3)).

(5) The right-handed tbWtbW coupling CφtbC_{\varphi tb} obtains its best limits from single-top and single-top-plus-Higgs production. These limits are narrower than the current LHC limits by a factor of about 1.5 at 3 TeV, growing to more than an order of magnitude at 14 TeV.

Finally, we remark that this analysis provides an overview of the different production processes and the potential sensitivity to the various couplings, at the level of undecayed top quarks. More detailed analyses, including decayed top quarks, backgrounds, and kinematic distributions, and in some cases also parton showering, hadronization, and fast detector simulation, have been made for the Yukawa coupling, but not for the other five coefficients treated in Appendix A. Moreover, the limits presented here are based on statistical uncertainties only; an assumed systematic uncertainty, as shown in Appendix A, can weaken considerably the limits from processes with large cross sections. More realistic analyses will be required in future studies.

Acknowledgments

We acknowledge support from Sistema Nacional de Investigadores de Secihti, México. The authors are grateful for the computing time granted by Lancad and Secihti on the Super-Computing Hybrid Cluster “Xiuhcóatl” at the General Coordination Of Information And Communication Technologies (CGSTIC) at Cinvestav (http://clusterhibrido.cinvestav.mx). We acknowledge the use of Anthropic Claude for assistance with syntax and grammar.

Individual limits on Wilson coefficients

This Appendix presents the individual bounds on the Wilson coefficients CtWC_{tW}, CtBC_{tB}, CtφC_{t\varphi}, CφtbC_{\varphi tb}, CφQ(−)C_{\varphi Q}^{(-)}, and CφtC_{\varphi t}, obtained in this work. The bounds are shown in Figure 7, Figure 8, and Figure 9. For each coefficient and center-of-mass energy s\sqrt{s}, the figures show the five processes that provide the strongest individual limits with the uncertainties given in Table 4. The limits on CbWC_{bW} obtained from single-top production are much weaker than those from other processes, as reported in Sect. 4.5 above, and are therefore not included here.

Notice that the uncertainties in Table 4 are obtained from (12) and are therefore statistical uncertainties. This is consistent with the practice in the references cited in Table 3, Table 5, and Table 6, and allows us to compare our results with those in these references. For completeness, the figures in this Appendix also present limits obtained with an assumed systematic uncertainty of 2% (1σ1\sigma), added in quadrature to the statistical uncertainty ϵσ\epsilon_\sigma (half of the values in Table 4); the total is then multiplied by 2 to obtain the 2σ2\sigma uncertainty used for the limits. These bounds are represented by semi-transparent bar extensions. As discussed in Sect. 4.6, the effect is largest for single-top production at high energies, where the statistical uncertainties are smallest, and small for single-top-plus-Higgs production, which is statistically dominated.

The limits given here for systematic uncertainties of 0% and 2% serve as benchmarks that can be used to linearly extrapolate to higher systematic uncertainties. This is relevant because at present there is no realistic estimate of the systematic uncertainties of a muon-collider detector. We have explicitly checked that, in the cases where those two limits are substantially different, linear extrapolation to a systematic uncertainty of 5% gives accurate results.

References

  1. [1]Hind Al Ali, Nima Arkani-Hamed, Ian Banta, et al., “The muon Smasher’s guide”, Rept. Prog. Phys. 85 (2022) 084201, [arXiv:2103.14043 [hep-ph]].
  2. [2]C. Aime, A. Apyan, M. A. Mahmoud Mohammed, N. Bartosik, F. Batsch, A. Bertolin, M. Bonesini, S. Bottaro, D. Buttazzo and R. M. Capdevilla Roldan, et al. “Muon Collider Physics Summary,” [arXiv:2203.07256 [hep-ph]].arxiv.org/abs/2203.07256
  3. [3]K. M. Black, S. Jindariani, D. Li, F. Maltoni, P. Meade, D. Stratakis, D. Acosta, R. Agarwal, K. Agashe and C. Aimè, et al. “Muon Collider Forum Report,” [arXiv:2209.01318 [hep-ex]].arxiv.org/abs/2209.01318
  4. [4]C. Accettura, D. Adams, R. Agarwal, et al., “Towards a Muon Collider”, [arXiv:2303.08533 [physics.acc-ph]].arxiv.org/abs/2303.08533
  5. [5]B. Grzadkowski, M. Iskrzynski, M. Misiak and J. Rosiek, “Dimension-Six Terms in the Standard Model Lagrangian,” JHEP 10, 085 (2010) [arXiv:1008.4884 [hep-ph]].DOI
  6. [6]D. Ake, A. O. Bouzas and F. Larios, “Top Quark Flavor Changing Couplings at a Muon Collider,” Adv. High Energy Phys. 2024, 2038180 (2024) doi:10.1155/2024/2038180 [arXiv:2311.09488 [hep-ph]].DOI
  7. [7]L. Shang, L. Zhang, B. Yang and S. Moretti, “Probing Anomalous tq̄Z Interactions at Muon Colliders,” [arXiv:2606.22412 [hep-ph]].
  8. [8]A. Senol, B. S. Ozaltay, M. Tekin and H. Denizli, “Sensitivity to top-quark FCNC interactions at future muon colliders,” Eur. Phys. J. C 86, no.9, 1068 (2026) doi:10.1140/epjc/s10052-026-16357-w [arXiv:2604.13562 [hep-ph]].DOI
  9. [9]S. Airen and R. Franceschini, “Top quark FCNC in Randall-Sundrum models: post-LHC allowed rates and searches at e+e− and μ+μ− colliders,” [arXiv:2601.14966 [hep-ph]].arxiv.org/abs/2601.14966
  10. [10]A. Glioti, D. Marzocca and A. Wulzer, “Flavor physics at high-energy muon colliders,” JHEP 12, 152 (2025) doi:10.1007/JHEP12(2025)152 [arXiv:2509.08132 [hep-ph]].DOI
  11. [11]T. Biswas, A. Datta and B. Mele, “Probing Higgs and top interactions through the muon lens at multi-TeV muon colliders,” JHEP 08, 121 (2026) [arXiv:2604.08688 [hep-ph]].DOI
  12. [12]T. Han, D. Liu and S. Wang, “Top quark electroweak dipole moment at a high energy muon collider,” Phys. Rev. D 111, no.3, 035015 (2025). [arXiv:2410.11015 [hep-ph]].DOI
  13. [13]F. Cornet-Gomez, V. Miralles, M. Miralles López, M. M. Llácer, and M. Vos, “Future collider constraints on top-quark operators,” JHEP 10, 156 (2025), [arXiv:2503.11518 [hep-ph]].
  14. [14]C. Accettura et al. [International Muon Collider], “The Muon Collider,” [arXiv:2504.21417 [physics.acc-ph]].
  15. [15]M. Forslund and P. Meade, “High precision higgs from high energy muon colliders,” JHEP 08, 185 (2022), [arXiv:2203.09425 [hep-ph]].DOI
  16. [16]M. Ruhdorfer, E. Salvioni and A. Wulzer, “Building the case for forward muon detection at a muon collider,” Phys. Rev. D 111, no.5, 053010 (2025) doi:10.1103/PhysRevD.111.053010 [arXiv:2411.00096 [hep-ph]].DOI
  17. [17]M. Ruhdorfer, E. Salvioni and A. Weiler, “A Global View of the Off-Shell Higgs Portal,” SciPost Phys. 8, 027 (2020) doi:10.21468/SciPostPhys.8.2.027 [arXiv:1910.04170 [hep-ph]].DOI
  18. [18]P. Li, Z. Liu and K. F. Lyu, “Higgs boson width and couplings at high energy muon colliders with forward muon detection,” Phys. Rev. D 109, no.7, 073009 (2024) [arXiv:2401.08756 [hep-ph]].arxiv.org/abs/2401.08756
  19. [19]C. H. de Lima, “Boosting vector boson fusion reconstruction at muon colliders,” Phys. Rev. D 113, no.5, L051703 (2026) doi:10.1103/xp3t-mvxx [arXiv:2507.22108 [hep-ph]].
  20. [20]A. Dedes, W. Materkowska, M. Paraskevas, J. Rosiek and K. Suxho, “Feynman rules for the Standard Model Effective Field Theory in Rξ-gauges,” JHEP 06, 143 (2017) [arXiv:1704.03888 [hep-ph]].DOI
  21. [21]G. Durieux, M. Perelló, M. Vos and C. Zhang, “Global and optimal probes for the top-quark effective field theory at future lepton colliders,” JHEP 10, 168 (2018) doi:10.1007/JHEP10(2018)168 [arXiv:1807.02121 [hep-ph]].DOI
  22. [22]J. A. Aguilar-Saavedra, C. Degrande, G. Durieux, F. Maltoni, E. Vryonidou, C. Zhang, D. Barducci, I. Brivio, V. Cirigliano and W. Dekens, et al. “Interpreting top-quark LHC measurements in the standard-model effective field theory,” [arXiv:1802.07237 [hep-ph]].arxiv.org/abs/1802.07237
  23. [23]Y. Liu, Y. Wang, C. Zhang, L. Zhang and J. Gu, “Probing top-quark operators with precision electroweak measurements*,” Chin. Phys. C 46, no.11, 113105 (2022) [arXiv:2205.05655 [hep-ph]].DOI
  24. [24]A. Hayrapetyan et al. [CMS], “Search for physics beyond the standard model in top quark production with additional leptons in the context of effective field theory,” JHEP 12, 068 (2023) doi:10.1007/JHEP12(2023)068 [arXiv:2307.15761 [hep-ex]].DOI
  25. [25]V. Chekhovsky et al. [CMS], “Combined effective field theory interpretation of Higgs boson, electroweak vector boson, top quark, and multi-jet measurements,” [arXiv:2504.02958 [hep-ex]].DOI
  26. [26]G. Aad et al. [ATLAS], “Inclusive and differential cross-section measurements of tt̄Z production in pp collisions at √s = 13 TeV with the ATLAS detector, including EFT and spin-correlation interpretations,” JHEP 07, 163 (2024) doi:10.1007/JHEP07(2024)163 [arXiv:2312.04450 [hep-ex]].DOI
  27. [27]G. Aad et al. [ATLAS], “Effective field theory interpretation of ATLAS measurements involving the Higgs boson, electroweak bosons and the top quark,” [arXiv:2604.21670 [hep-ex]].arxiv.org/abs/2604.21670
  28. [28]G. Aad et al. [ATLAS], “Constraints on effective field theories via quadruple-differential angular decay rates from t-channel single-top-quark production at √s = 13 TeV with the ATLAS detector,” [arXiv:2510.23372 [hep-ex]].DOI
  29. [29]J. de Blas, A. Goncalves, V. Miralles, L. Reina, L. Silvestrini and M. Valli, “Constraining new physics effective interactions via a global fit of electroweak, Drell-Yan, Higgs, top, and flavour observables,” JHEP 03, 013 (2026) doi:10.1007/JHEP03(2026)013 [arXiv:2507.06191 [hep-ph]].DOI
  30. [30]J. de Blas, A. Goncalves, V. Miralles, L. Reina, L. Silvestrini and M. Valli, Impact of Higgs-boson measurements on SMEFT fits, [arXiv:2512.02256 [hep-ph]].DOI
  31. [31]P. Azzi, S. Farry, P. Nason, A. Tricoli, D. Zeppenfeld, R. Abdul Khalek, J. Alimena, N. Andari, L. Aperio Bella and A. J. Armbruster, et al. “Report from Working Group 1: Standard Model Physics at the HL-LHC and HE-LHC,” CERN Yellow Rep. Monogr. 7, 1-220 (2019) [arXiv:1902.04070 [hep-ph]].
  32. [32]T. Armadillo et al., “New Physics Reach through Precision at Future Colliders: a Multi-Pronged Approach,” [arXiv:2604.16596 [hep-ph]].
  33. [33]J. ter Hoeve, L. Mantani, J. Rojo, A. N. Rossia and E. Vryonidou, “Connecting scales: RGE effects in the SMEFT at the LHC and future colliders,” JHEP 06, 125 (2025) [arXiv:2502.20453 [hep-ph]].arxiv.org/abs/2502.20453
  34. [34]E. Celada, T. Giani, J. ter Hoeve, L. Mantani, J. Rojo, A. N. Rossia, M. O. A. Thomas and E. Vryonidou, “Mapping the SMEFT at high-energy colliders: from LEP and the (HL-)LHC to the FCC-ee,” JHEP 09, 091 (2024) [arXiv:2404.12809 [hep-ph]].arxiv.org/abs/2404.12809
  35. [35]N. Kidonakis and K. Simşek, “t̄t production as a probe of dimension-six SMEFT at higher orders,” Phys. Rev. D 114, no.5, 055019 (2026) [arXiv:2604.00902 [hep-ph]].arxiv.org/abs/2604.00902
  36. [36]D. Barducci, “Bottom quark electroweak dipole moments at a high-energy μ collider,” [arXiv:2606.24410 [hep-ph]].arxiv.org/abs/2606.24410
  37. [37]J. Alwall, R. Frederix, S. Frixione, V. Hirschi, F. Maltoni, O. Mattelaer, H.-S. Shao, T. Stelzer, P. Torrielli, M. Zaro, “The automated computation of tree-level and next-to-leading order differential cross sections, and their matching to parton shower simulations,” J. High Energy Phys. 07 (2014) 079 [arXiv:1405.0301 [hep-ph]].DOI
  38. [38]A. Alloul, N. D. Christensen, C. Degrande, C. Duhr, B. Fuks, “FeynRules 2.0 – A complete toolbox for tree-level phenomenology,” Comput. Phys. Commun. 185 (2014) 2250 [arXiv:1310.1921 [hep-ph]].DOI
  39. [39]R. Brun, F. Rademakers, “ROOT: An object oriented data analysis framework,” Nucl. Instrum. Methods Phys. Res. A 389 (1997) 81.
  40. [40]A. Belyaev, N. D. Christensen and A. Pukhov, “CalcHEP 3.4 for collider physics within and beyond the Standard Model,” Comput. Phys. Commun. 184, 1729-1769 (2013) [arXiv:1207.6082 [hep-ph]].DOI
  41. [41]J. de Favereau, C. Delaere, P. Demin, A. Giammanco, V. Lemaitre, A. Mertens, M. Selvaggi, “DELPHES 3: a modular framework for fast simulation of a generic collider experiment,” J. High Energy Phys. 02 (2014) 057 [arXiv:1307.6346 [hep-ph]].DOI
  42. [42]F. Takahashi et al. (Particle Data Group), “The Review of Particle Physics,” Int. J. Mod. Phys. A 41 (2026) 2630011.
  43. [43]CMS Collaboration, “Jet Tagging with the Boosted Event Shape Tagger at CMS,” CMS Performance Note CMS DP-2023/065, https://cds.cern.ch/record/2868813.
  44. [44]M. Chen and D. Liu, “Top Yukawa coupling measurement at the muon collider,” Phys. Rev. D 109, no.7, 075020 (2024) [arXiv:2212.11067 [hep-ph]].arxiv.org/abs/2212.11067
  45. [45]Z. Liu, K. F. Lyu, I. Mahbub and L. T. Wang, “Top Yukawa coupling determination at high energy muon collider,” Phys. Rev. D 109, no.3, 035021 (2024) [arXiv:2308.06323 [hep-ph]].arxiv.org/abs/2308.06323
  46. [46]J. Chen, J. Chen and W. He, “Measuring Top Yukawa Coupling through 2 → 3 VBS at Muon Collider,” [arXiv:2502.08310 [hep-ph]].arxiv.org/abs/2502.08310
  47. [47]M. E. Cassidy, Z. Dong, K. Kong, I. M. Lewis, Y. Zhang and Y. J. Zheng, “Probing the CP structure of the top quark Yukawa at the future muon collider,” JHEP 05, 176 (2024) [arXiv:2311.07645 [hep-ph]].DOI
  48. [48]A. Escamilla, A. Q. Bouzas and F. Larios, “Single top production at linear e⁻e⁺ colliders,” Phys. Rev. D 97, 033004 (2018) [arXiv:1712.02763 [hep-ph]].DOI
  49. [49]Q. Bi, Z. Li, C. Liu, J. Liu and X. P. Wang, “Probing anomalous Wtb couplings through bW spin correlations in top-quark pair production at the HL-LHC,” [arXiv:2610.04971 [hep-ph]].arxiv.org/abs/2610.04971

Paper details

vlnc:W_zuk3w3uf
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 8

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Anthropic Claude

View statement
Looking for related papers…
Contents