betaFeedback

WorksPhysics and Astronomy

Generation of neutron Bessel beams

Abstract

Matter waves can exhibit structured wavefields analogous to those of light, offering new means of controlling the spatial and angular-momentum degrees of freedom of massive particles. Bessel beams are a fundamental class of structured waves that exhibit non-diffracting propagation, self-healing, and well-defined orbital angular momentum (OAM). Here, we experimentally realize neutron Bessel beams by imprinting a nanoscale conical phase gradient onto a neutron wavefront. By incorporating azimuthal phase gradients, we generate zeroth-, third-, and sixth-order Bessel beams, demonstrating direct control of both the OAM and radial structure of a massive particle. We also propose a neutron Bessel-grating interferometer, complementary to established optical and electron interferometric methods, in which varying the radial grating period by approximately 100 nm yields a controlled Gouy phase shift of ππ. These results establish neutron Bessel beams as a new platform for diffractive neutron focusing and provide an experimental foundation for theoretical studies of Bessel beams in neutron scattering, decay, and OAM characterization.

Introduction

In 1987, Durnin et al. experimentally demonstrated a remarkable class of propagation-invariant solutions to the Helmholtz equation: Bessel beams (BBs) [1, 2]. Unlike conventional Gaussian beams, an ideal BB maintains its transverse intensity profile during propagation and can reconstruct after partial obstruction [3]. Furthermore, zeroth-order BBs possess the smallest central-spot diameter compared to conventional beams [4], while higher-order BBs carry well-defined orbital angular momentum (OAM) [5]. These properties have enabled applications including extended-depth-of-field imaging [6, 7], OAM transfer [8], optical micromanipulation [9, 10], and high-aspect-ratio laser materials processing [11].

While BBs have been extensively studied in optical systems [12], their subsequent realization with matter waves [13], including electrons [14] and atomic Bose–Einstein condensates [15], demonstrated that these propagation-invariant solutions are a universal feature of wave mechanics. Several theoretical studies have directly considered free-space propagating neutron Bessel beams, and their relevance in multiple neutron scattering experiments [16, 17, 18], neutron decay [19], and neutron OAM characterization [20]. Realizing such beams with neutrons, however, presents unique experimental challenges arising from limited transverse coherence, low available flux, and finite detector spatial resolution. These constraints necessitate different approaches to wavefront engineering than those used for optical or charged-particle beams.

Here, we apply the nanoscale phase-grating array approach developed for generating helical neutron waves [21] to imprint a conical phase gradient onto the neutron wavefront, generating free-space propagating neutron BBs. We demonstrate control over both the radial structure and OAM of the neutron wave by generating zeroth-, third-, and sixth-order BBs. For the zeroth-order BB propagated into the far-field, we measure a central intensity spot-size FWHM that is a factor of 2×2\times smaller than that of a Gaussian beam under equivalent experimental conditions. Together with vortex [21] and Airy [22] beams, this work completes the three fundamental classes of structured neutron states. The conical structure of neutron Bessel beams also provides a phase-grating platform for measuring the Gouy phase, a fundamental phase anomaly described by the uncertainty principle [23], which has been observed for optical Bessel beams [24] and structured electron beams [25]. Finally, neutron Bessel beams offer a route to shaping and focusing neutron waves without refractive optics, which are limited by near-unity refractive indices [26, 27].

Bessel Beam Generation

Several review articles have presented the theory, experimental generation, and applications of Bessel beams [28, 29]. Here, we outline the basic principles underlying the generation and propagation of neutron Bessel beams implemented in this work.

Theory: A Bessel beam is a cylindrical-coordinate solution of the time-dependent Schrödinger equation for a free neutron, which can be written as

ψ(r,ϕ,z,t)=Jℓ(krr)eiℓϕeikzze−iωt,(1)\psi(r,\phi,z,t) = J_{\ell}(k_r r)e^{i\ell\phi}e^{ik_z z}e^{-i\omega t}, \tag*{(1)}

where Jℓ(krr)J_{\ell}(k_r r) is the Bessel function of the first kind of order ℓ\ell, krk_r and kzk_z are the transverse and longitudinal components of the neutron wavevector, respectively, and ω=ℏk2/2mn\omega= \hbar k^2/2m_n, where k2=kr2+kz2k^2 = k_r^2 + k_z^2 and mnm_n is the neutron mass. The integer ℓ\ell denotes the OAM mode of the beam, with each neutron carrying OAM of ℓℏ\ell\hbar about the propagation axis.

The transverse profile of a Bessel beam can be understood as the coherent superposition of plane waves whose wavevectors lie on a cone, with equal transverse wavevector magnitude (krk_r) and uniformly distributed azimuthal angles. This superposition gives rise to the Bessel function Jℓ(krr)J_{\ell}(k_r r) in Eq. (1), which can be expressed as [30]

Jℓ(krr)=i−ℓ2π∫02πexp⁡[iℓ(ϕ′−ϕ)]×exp⁡[ikr(xcos⁡ϕ′+ysin⁡ϕ′)] dϕ′.(2)J_{\ell}(k_r r) = \frac{i^{-\ell}}{2\pi}\int_{0}^{2\pi}\exp[i\ell(\phi' - \phi)] \times\exp[i k_r(x\cos\phi' + y\sin\phi')]\,d\phi'. \tag*{(2)}

Propagation dynamics: A Bessel beam can be generated by imprinting a conical phase profile onto an incident wavefront using a phase grating. A general Bessel phase profile is given by

Φ(x,y)=Δβ2[sgn⁡(sin⁡[2πpx+2πρr+qϕ])+1],(3)\Phi(x,y) = \frac{\Delta\beta}{2}\left[\operatorname{sgn}\left(\sin\left[\frac{2\pi}{p}x+\frac{2\pi}{\rho}r+q\phi\right]\right)+1\right], \tag*{(3)}

where pp is the period of the linear grating, ρ\rho is the radial period, and qq is the topological charge of the grating. The phase shift acquired by the neutron wavefunction relative to free space is set by the grating height hh according to Δβ=Nbcλh\Delta\beta= N b_c \lambda h, where NbcN b_c is the neutron scattering length density of the grating material and λ\lambda is the neutron wavelength. The Bessel-beam order ℓ\ell, and hence the OAM mode, is determined by the grating topological charge and the diffraction order mm according to ℓ=mq\ell= mq, such that neutrons in the mmth diffraction order carry an OAM of mqℏmq\hbar. The sign of mqmq determines the handedness of the OAM winding about the propagation axis.

The linear grating component spatially separates the diffraction orders at the detector, with the first diffraction orders propagating at an angle α≈λ/p\alpha\approx\lambda/p relative to the zeroth order. The conical phase fringes set the cone angle θ≈λ/ρ\theta\approx\lambda/\rho of the Bessel beams. In the far field at a propagation distance zz, the m=+1m = +1 diffraction order for q=0q = 0 is centered at horizontal position x≈zαx \approx z\alpha, with a Bessel ring radius of r≈zθr \approx z\theta. Thus, the linear and radial grating periods determine the diffraction angle and the transverse wavevector, respectively, while the azimuthal phase winding determines the quantized OAM ℓℏ\ell\hbar. The resulting radial intensity profile depends on both the transverse wavevector and the OAM order ℓ\ell. Figure 1 illustrates the near-field and far-field propagation of neutron Bessel beams generated by gratings with q=0q = 0 (top row) and q=3q = 3 (bottom row), producing zeroth- and third-order Bessel beams that differ by whether the beam carries OAM. The simulations consider a Gaussian neutron wavepacket with transverse extent σ\sigma incident on a phase grating described by Eq. (3), with p=120p = 120 nm, ρ=480\rho= 480 nm, R=10R = 10 μ\mum, λ=12\lambda= 12 Å, and σ=1\sigma= 1 μ\mum. Details of the simulation method are provided in Refs. [31, 32].

Simulated near-field and far-field propagation of Bessel beams generated by two phase gratings

Figure 1. Simulated near-field and far-field propagation of Bessel beams generated by two phase gratings: a q=0q = 0 grating producing a zeroth-order Bessel beam (BB0_0, top row) and a q=3q = 3 grating producing a third-order Bessel beam (BB3_3, bottom row). Simulation parameters are p=120p = 120 nm, ρ=480\rho= 480 nm, R=10R = 10 μ\mum, λ=12\lambda= 12 Å, and σ=1\sigma= 1 μ\mum. (a) Near-field intensity carpet of BB0_0 in the first diffraction order. Consistent with Eq. (4), the beam remains non-diffracting until z≈0.4z \approx0.4 mm, beyond which it begins to expand. (b) Transverse (xyxy) intensity profile at z=0.4z = 0.4 mm, showing a bright central core surrounded by concentric rings. (c) Far-field intensity carpet up to z=10z = 10 m and (d) the corresponding transverse profile at z=10z = 10 m, where the beam forms a ring. (e–h) Same as (a–d) for BB3_3, illustrating the effect of OAM. In the near field (e,f), the bright central core of BB0_0 is replaced by a zero-intensity core arising from the on-axis phase singularity. In the far field (g,h), the ring has a larger radius than for BB0_0 from carrying nonzero OAM.

When the incident wavepacket uniformly illuminates the grating element (σ≫R\sigma\gg R), the maximum propagation distance over which the Bessel beam remains nondiffracting is

zmax⁡=Rtan⁡θ,(4)z_{\max} = \frac{R}{\tan\theta}, \tag*{(4)}

where RR is the radius of the diffractive element and θ=λ/ρ\theta= \lambda/\rho is the cone angle. In the opposite limit (R≫σR \gg\sigma), the transverse extent of the wavepacket sets the effective aperture, and RR in Eq. (4) is replaced by σ\sigma. The simulations in Figure 1 fall in this second regime (R=10σR = 10\sigma), giving zmax⁡≈σ/tan⁡θ≈0.4z_{\max} \approx\sigma/\tan\theta\approx0.4 mm, and both beams remain nondiffracting up to this distance before beginning to spread (Figure 1a,Figure 1e).

Within the non-diffracting region, both beams exhibit the multi-ring transverse profile characteristic of Bessel beams (Figure 1b,Figure 1f), but the zeroth-order beam has a bright, narrow central core, whereas the beam carrying OAM has a zero-intensity core due to its on-axis phase singularity. Beyond zmax⁡z_{\max}, the beams expand linearly (Figure 1c,Figure 1g) and both form ring-shaped profiles in the far field (Figure 1d,Figure 1h), with the ring radius increasing in the nonzero OAM case. The interplay between RR, σ\sigma, and ℓ\ell thus governs both the propagation dynamics and the transverse intensity profiles of the Bessel beams [33].

Experimental Implementation: We implemented this method of Bessel beam generation by fabricating nanoscale conical phase structures in silicon wafers, with a linear period of p=120p = 120 nm and a radial period of ρ=480\rho= 480 nm. Scanning electron microscopy (SEM) images of individual grating elements are shown in Figure 2a for q=0q = 0 and Figure 2c for q=3q = 3, and the corresponding array structures, viewed at a 45∘45^\circ angle, are shown in Figure 2b,Figure 2d. Each grating element has a radius of approximately R=0.6R = 0.6 μ\mum, chosen to be comparable to the transverse neutron coherence length [32], and the elements are repeated millions of times in an array to increase the overall diffraction efficiency. Since neutrons in the mmth diffraction order carry an OAM of mqℏmq\hbar, the q=3q = 3 grating produces third-order Bessel beams (BB3_3) in the m=±1m = \pm1 diffraction orders and sixth-order Bessel beams (BB6_6) in the m=±2m = \pm2 diffraction orders. For the fabricated gratings, the non-diffraction region is confined to a short distance directly after the grating, zmax⁡≈0.24z_{\max} \approx0.24 mm for λ=12\lambda= 12 Å.

SEM images of the Bessel beam phase gratings

Figure 2. SEM images of the Bessel beam phase gratings used in this work. (a) A single grating element of the zeroth-order Bessel grating with q=0q = 0 (Eq. (3)). (b) The BB0_0 phase-grating array viewed at a 45∘45^\circ angle. (c,d) Corresponding images of the q=3q = 3 grating, which produces the BB3_3 and BB6_6 neutron Bessel beams. The grating element has a radius of R=0.6R = 0.6 μ\mum.

Using these gratings, we performed neutron scattering experiments on the ZOOM small-angle neutron scattering (SANS) instrument at the ISIS Neutron and Muon Source and on the Bilby SANS instrument [34] at the Australian Centre for Neutron Scattering (ACNS). An overview of the measurements and the relevant experimental parameters for both instruments is given in Table I. The standard SANS setup consists of a collimation region defined by the source slit with diameter A1A_1, the collimation distance L1L_1, and the sample slit with diameter A2A_2, followed by the sample position, occupied here by the silicon phase gratings. The neutrons then propagate

FacilityISISISISANSTO
InstrumentZOOMZOOMBILBY
MeasurementBB0_0 & BB3_3BB6_6BB3_3
zz [m]9.69.618.4
λ\lambda [Å]10.5–14.56.5–14.512–19
A1A_1 [mm]6620
L1L_1 [m]8817.1
A2A_2 [mm]665

Table 1. Experimental configurations for the measurements in this work. Measurements of the BB0_0, BB3_3, and BB6_6 Bessel beams were performed at ISIS/ZOOM and ANSTO/Bilby. Here zz is the grating-to-detector distance, λ\lambda is the wavelength range, and A1A_1, L1L_1, and A2A_2 are the source slit diameter, collimation distance, and sample slit diameter, respectively.

a distance zz to a position-sensitive 3^3He neutron detector with typical pixel sizes of ∼3\sim3–88 mm.

Two-dimensional data reduction was performed for all measurements using the Mantid framework [35]. The ZOOM configuration was optimized for measurement of multiple diffraction orders simultaneously, while Bilby was used in a high-resolution configuration, taking advantage of its long rear-detector distance and adjustable wavelength resolution, which we set to Δλ/λ=5.6%\Delta\lambda/\lambda= 5.6\%. Only Bilby’s rear detector was used. Bilby data were reduced using dedicated scripts [36], with the wavelength range restricted to 1212–1919 Å to maximize signal while excluding shorter wavelengths, where the angular resolution and detector pixelation are less favorable.

Results

Shown in Figure 3 are the experimentally generated BB0_0, BB3_3, and BB6_6 far-field intensity profiles, alongside simulations. The measurement configurations for rows 1 and 2 in Figure 3 correspond to columns 2 and 3 of Table I, respectively.

Experimental and simulated far-field SANS intensity profiles of Bessel beams

Figure 3. (a,b) Experimental and simulated far-field SANS intensity profiles of the zeroth order Bessel beam (BB0_0, horizontal diffraction) and the third order Bessel beam (BB3_3, vertical diffraction) at the 2D position sensitive neutron detector. As observed in both experiment and simulation, the BB0_0 possesses a bright central spot surrounded by a broader ring, whereas BB3_3 displays the zero intensity center from carrying OAM ℓ=3\ell= 3. (c,d) Experimental and simulated intensity slices along the BB0_0 and BB3_3 first diffraction orders, indicated by the orange and purple lines in (b). (e,f) Experimental and simulated far-field SANS intensity profiles in log-scale to demonstrate higher diffraction orders, such as the sixth order Bessel beam (BB6_6, vertical diffraction). (g,h) Transverse slices are in good agreement with simulation. The experiment exhibits some asymmetry between positive and negative diffraction orders, which may arise from slight tilts of the wafers about the vertical and horizontal axes, and which may explain why the simulated BB6_6 is slightly less intense. In both experiment and simulation the direct beam is masked out to emphasize the diffracted orders. The experimental configurations for the top row and bottom row of images correspond to columns 2 and 3 of Table I, respectively.

To simultaneously measure both q=0q = 0 and q=3q = 3 BB gratings, the BB gratings were stacked orthogonally, utilizing a method previously proposed and implemented with fork-dislocation phase-gratings [37, 38]. As seen in Figure 3a, the q=0q = 0 grating is arranged for horizontal diffraction, and the q=3q = 3 grating is perpendicular, producing the vertical diffraction orders. The black or white central masks obstruct the direct beam in both simulations and experiments.

We directly compare transverse intensity slices between simulation and experiment. The orange and purple lines represent the experiment slices while the black dotted line is the simulation. All simulated intensity profiles are in good agreement with experiment for simulated grating heights of h=1.2 μmh = 1.2\ \mu\mathrm{m} for the q=0q = 0 grating and h=1.3 μmh = 1.3\ \mu\mathrm{m} for the q=3q = 3 grating. The diffraction efficiency of the gratings is proportional to h2h^2 for small phase shifts (Δβ\Delta\beta in Eq. (3)).

The structure in the BB intensity profiles is a direct result of interference taking place between the waves propagating in a conical shape. We can therefore quantify the quality of the neutron BB production through visibility of the interference fringes [29]. Comparing the bright ring intensities (Imax⁡I_{\max}) to the dark fringes (Imin⁡I_{\min}) for all profiles in Figure 3, we compute the contrast

C=Imax⁡−Imin⁡Imax⁡+Imin⁡(5)C = \frac{I_{\max} - I_{\min}}{I_{\max} + I_{\min}} \tag*{(5)}

and summarize the results in Table II. The contrast of the BB0_0 in the first diffraction order was limited to 15% due to detector spatial resolution constraints, while the BB3_3 and BB6_6 with the dark vortex centers have a production quality of over 60%.

Notably, both simulated and experimental BB0_0 intensity profiles in Figure 3 illustrate a small central lobe. As illustrated in Figure 1a-Figure 1h, this is expected behaviour for the near-field BB0_0 intensity profiles but in the far-field there is typically no central spot for any BB. This far-field central lobe appears since we are in the limit R<σR < \sigma. In this aperture-edge limit, the resultant far-field intensity profile is effectively a convolution of the ideal ring pattern shown in Figure 1d, and the diffraction from the phase grating aperture edge in Figure 2a. This yields a central lobe in the far-field BB0_0 intensity profiles, which we see in both experiment and simulation in Figure 3a,Figure 3b.

Computing the FWHM for the first diffraction order BB0_0 we obtain a central spot FWHM of 7.8 mm ±\pm 0.1 mm, at λ=12.5\lambda= 12.5 Å. For comparison, we performed measurements with solely linear gratings at the exact same propagation distance and collimation settings. The linear gratings have been previously demonstrated in Refs. [21, 22]. The FWHM of the Gaussian diffraction spots in the first diffraction order is 15.5 mm ±\pm 0.1 mm. Under these experimental conditions, the neutron BBs have a central spot size that is ∼2\sim2 times smaller than conventional Gaussian beams.

The BB3_3 profiles in Figure 3 exhibit a faint multi-ring structure, characterized by a bright lobe on the outer ring and a weaker inner ring. A similar structure is reproduced in our simulations. In the ideal limit of large RR, a Bessel beam is expected to produce a single, narrow ring in the far field (Figure 1d,Figure 1h). Once again, the additional structure observed here arises from the interplay between the finite values of RR and ρ\rho and the neutron’s transverse extent.

BB orderContrast
BB0_0 (m=1m = 1)(15 ±\pm 7) %
BB0_0 (m=2m = 2)(61 ±\pm 7) %
BB3_3(61 ±\pm 13) %
BB6_6(73 ±\pm 12) %

Table 2. Neutron Bessel beam quality, quantified by the fringe contrast CC (Eq. (5)) for each Bessel-beam order. The uncertainties are statistical and represent one standard deviation.

To resolve these features more clearly, we generated BB3_3 using a higher angular resolution configuration, listed in column 4 of Table I. Figure 4 shows the m=+1m = +1 diffraction order from the q=3q = 3 grating, which produces BB3_3. The bright outer lobe is clearly resolved, while the weaker inner ring is also visible. The corresponding azimuthally integrated radial intensity profiles from experiment and simulation are shown below the BB3_3 images in Figure 4. Both profiles exhibit a central intensity minimum at r=0r = 0, consistent with the phase singularity associated with the ℓ=3\ell= 3 OAM mode, followed by a weak peak at approximately r=4.0r = 4.0 cm corresponding to the inner ring. At larger radius, a second, more intense peak corresponds to the bright outer ring, before the intensity decreases to a minimum beyond r=10r = 10 cm. In comparable experiments featuring small phase grating apertures, this wide ring structure distinguishes the BB3_3 profile from a conventional ℓ=3\ell= 3 OAM mode [21].

Experimental and simulated third-order Bessel beam BB$_3$ intensity profiles

Figure 4. Experimental and simulated third-order Bessel beam BB3_3 measured using the higher angular resolution configuration in column 4 of Table I, which resolves the more complex ring structure comprising the intensity profile. A dimmer inner ring is observed in both experiment and simulation, surrounded by a larger-radius, more intense outer ring. The bright spot on the outer ring is a direct consequence of the physical phase-grating structure. The corresponding azimuthally integrated radial intensity profiles show peaks at r∼4r \sim4 cm and r∼7r \sim7 cm for the inner and outer rings, respectively. The overall radial profile is substantially broader than that produced by a simple ℓ=3\ell= 3 fork-dislocation phase-grating.

Discussion and Applications

The experimental realization of neutron Bessel beams establishes them as an accessible class of structured neutron wavefields and completes the demonstration of the three fundamental classes of structured neutron states: vortex (OAM) [21], Airy [22], and Bessel beams, expanding the range of structured wavefields available for neutron optics. This development comes amid recent progress in neutron OAM research, including new approaches to OAM generation and characterization [39, 40, 41, 42, 43] and investigations of OAM-dependent nuclear interactions [38]. Beyond just vortex states, various theoretical studies have directly considered neutron Bessel beams for investigating scattering [16, 17, 18], OAM characterization [20], and neutron decay [19]. More recently, theoretical work has investigated spin textures and Skyrmion-like structures in twisted fermion beams, including Bessel states [44].

Notably, the conical structure of neutron Bessel beams also provides access to the Gouy phase. This phase can be understood as a consequence of the uncertainty principle: confining a wave transversely spreads its transverse momentum and thereby reduces its longitudinal wavevector [23]. In a Bessel beam, this confinement is built into the cone of plane waves itself. Because every plane wave component shares the same transverse wavevector krk_r, the beam accumulates a Gouy phase that grows linearly with propagation distance and is independent of the OAM order ℓ\ell [24, 29],

ϕG=(k−kz)z≈kr2z2k=πλzρ2.(6)\phi_G = (k-k_z)z \approx\frac{k_r^2 z}{2k} = \frac{\pi\lambda z}{\rho^2}. \tag*{(6)}

For neutrons, this confinement-induced phase has been observed by passing neutrons through narrow silicon channels inside a perfect-crystal interferometer [45]. Bessel gratings offer a complementary free-space measurement, with the transverse momentum defined lithographically by ρ\rho rather than by material boundaries, and with a phase that accumulates at ≈16\approx16 rad/mm for λ=12\lambda= 12 Å and ρ=480\rho= 480 nm.

Interferometric measurements of the Bessel-beam Gouy phase are well established in optics [24, 46], and Gouy-phase effects have been observed with structured electron beams [25, 47]. These techniques translate naturally to neutron optics. For example, in a Bessel-grating variant of the neutron OAM interferometer [31], arrays of q=+2q=+2 and q=−2q=-2 Bessel gratings with identical ρ\rho can be patterned on opposite faces of a silicon wafer of thickness dd. The two primary interfering paths differ by the Gouy phase ϕG\phi_G of Eq. (6) with z=dz=d, which rotates the four-fold petal interference pattern in the far field by ϕG/Δℓ\phi_G/\Delta\ell, where here Δℓ=4\Delta\ell=4. Because ϕG∝1/ρ2\phi_G \propto1/\rho^2, this rotation is set by the grating design: for d=320d=320 μ\mum and λ=12\lambda=12 Å, changing ρ\rho from 480 nm to 380 nm shifts the Gouy phase by π\pi, producing a clearly resolved petal rotation (Figure 5). Such a measurement would provide a lithographically tunable, ℓ\ell-independent propagation phase for neutron interferometry, against which OAM-dependent phase shifts from materials and nuclear interactions could be isolated.

Simulated Gouy phase measurement with a neutron Bessel grating interferometer

Figure 5. Simulated Gouy phase measurement with a neutron Bessel grating interferometer, consisting of q=+2q=+2 and q=−2q=-2 Bessel gratings on opposite faces of a silicon wafer of thickness d=320d=320 μ\mum, for λ=12\lambda=12 Å. (a) Four-lobe far-field interference pattern for ρ=480\rho=480 nm. (b) Reducing the radial period to ρ=380\rho=380 nm increases the Gouy phase accumulated across the wafer by π\pi (Eq. (6)), rigidly rotating the pattern by π/Δℓ=π/4\pi/\Delta\ell=\pi/4 rad. The larger ring radius reflects the larger cone angle θ≈λ/ρ\theta\approx\lambda/\rho. (c) Azimuthal intensity profiles taken at the radius of maximum intensity slice (rmax⁡r_{\max}) in (a) and (b), showing the π\pi phase shift. The simulations consider a single grating element on each face, with R=2R=2 μ\mum, p=100p=100 nm, z=12z=12 m and σ=10\sigma=10 μ\mum.

Beyond their OAM and radial features, neutron Bessel beams uniquely combine properties that are otherwise distributed across different classes of structured waves. The combination of a narrow central lobe and its propagation invariance over an extended non-diffracting region is particularly valuable for neutrons, for which focusing optics remain a central challenge: the neutron refractive index of common materials differs from unity by only ∼10−5\sim10^{-5}–10−610^{-6}, so conventional refractive lenses are weak and must be stacked to achieve appreciable focusing [26, 27]. A Bessel grating instead acts as a diffractive axicon, producing an extended focal line whose central lobe is set lithographically and is maintained over the entire non-diffracting region. By optimizing the grating parameters of this work, in particular the element radius RR and radial period ρ\rho in Eq. (4), samples placed within the non-diffracting region could exploit the propagation-invariant and self-healing properties of neutron Bessel beams to investigate neutron–matter interactions with structured incident wavefronts. Finally, Bessel gratings are naturally complementary to emerging diffractive neutron optics. Neutron Fresnel lenses [48, 49] could transform the generated Bessel beams into perfect vortices, whose ring radius is ideally independent of OAM [50]. Such beams would provide a platform for isolating OAM-dependent scattering effects, since the transverse extent of different OAM modes could ideally be made equal.

Conclusion

This work presents the first experimental realization of neutron Bessel beams and demonstrates control over their OAM and radial structure. By varying the grating topological charge, we generate zeroth-, third-, and sixth-order Bessel beams. The far-field intensity profile generated from the zeroth-order Bessel beam grating exhibits a central spot approximately 2×2 \times smaller than the corresponding Gaussian diffraction order measured under identical conditions, demonstrating the enhanced transverse localization afforded by the Bessel-beam structure. Higher-order neutron Bessel beams are generated with a contrast quality of over 60 %. These results enable several applications, including measurement of the neutron Gouy phase, which can be shifted by π\pi through a ∼100\sim100 nm change in ρ\rho, structured probes of OAM-dependent scattering and nuclear interactions, and diffractive neutron focusing without refractive optics.

Acknowledgments

This work was supported by the Canadian Excellence Research Chairs (CERC) program, the Natural Sciences and Engineering Research Council of Canada (NSERC) Discovery program, the NSERC Canada Graduate Scholarships programs (CGS-M and PGS-D), Collaborative Research and Training Experience (CRE-ATE) program, the Canada First Research Excellence Fund (CFREF), and the US Department of Energy, Office of Nuclear Physics, under Interagency Agreement 89243019SSC000025. Experiments at the ISIS Neutron and Muon Source were supported by beamtime allocation RB2520246 from the Science and Technology Facilities Council. We acknowledge the support of the Australian Centre for Neutron Scattering (ACNS) and the Australian Government through the National Collaborative Research Infrastructure Strategy, in supporting the neutron research infrastructure used in this work via ACNS P21610.

References

References

  1. [1]J. Durnin, “Exact solutions for nondiffracting beams. i. the scalar theory,” Journal of the Optical Society of America A, vol. 4, no. 4, pp. 651–654, 1987.DOI
  2. [2]J. Durnin, J. J. Miceli, and J. H. Eberly, “Diffraction-free beams,” Physical Review Letters, vol. 58, no. 15, pp. 1499–1501, 1987.pubmed.ncbi.nlm.nih.gov/10034453
  3. [3]Z. Bouchal, J. Wagner, and M. Chlup, “Self-reconstruction of a distorted nondiffracting beam,” Optics communications, vol. 151, no. 4-6, pp. 207–211, 1998.DOI
  4. [4]D. McGloin and K. Dholakia, “Bessel beams: diffraction in a new light,” Contemporary physics, vol. 46, no. 1, pp. 15–28, 2005.DOI
  5. [5]K. Volke-Sepúlveda, V. Garcés-Chávez, S. Chávez-Cerda, J. Arlt, and K. Dholakia, “Orbital angular momentum of a high-order bessel light beam,” Journal of Optics B: Quantum and Semiclassical Optics, vol. 4, no. 2, pp. S82–S89, 2002.
  6. [6]T. A. Planchon, L. Gao, D. E. Milkie, M. W. Davidson, J. A. Galbraith, C. G. Galbraith, and E. Betzig, “Rapid three-dimensional isotropic imaging of living cells using bessel beam plane illumination,” Nature methods, vol. 8, no. 5, pp. 417–423, 2011.DOI
  7. [7]F. O. Fahrbach and A. Rohrbach, “Propagation stability of self-reconstructing bessel beams enables contrast-enhanced imaging in thick media,” Nature communications, vol. 3, no. 1, p. 632, 2012.DOI
  8. [8]V. Garcés-Chávez, D. McGloin, M. Padgett, W. Dultz, H. Schmitzer, and K. Dholakia, “Observation of the transfer of the local angular momentum density of a multiringed light beam to an optically trapped particle,” Physical review letters, vol. 91, no. 9, p. 093602, 2003.
  9. [9]J. Arlt, V. Garcés-Chávez, W. Sibbett, and K. Dholakia, “Optical micromanipulation using a bessel light beam,” Optics communications, vol. 197, no. 4-6, pp. 239–245, 2001.DOI
  10. [10]V. Garcés-Chávez, D. McGloin, H. Melville, W. Sibbett, and K. Dholakia, “Simultaneous micromanipulation in multiple planes using a self-reconstructing light beam,” Nature, vol. 419, no. 6903, pp. 145–147, 2002.
  11. [11]M. Duocastella and C. B. Arnold, “Bessel and annular beams for materials processing,” Laser & Photonics Reviews, vol. 6, no. 5, pp. 607–621, 2012.DOI
  12. [12]H. Rubinstein-Dunlop, A. Forbes, M. Berry, M. Dennis, D. L. Andrews, M. Mansuripur, C. Denz, C. Alpmann, P. Banzer, T. Bauer, et al., “Roadmap on structured light,” Journal of Optics, vol. 19, no. 1, p. 013001, 2016.
  13. [13]K. Y. Bliokh, E. Karimi, M. J. Padgett, M. A. Alonso, M. R. Dennis, A. Dudley, A. Forbes, S. Zahedpour, S. W. Hancock, H. M. Milchberg, et al., “Roadmap on structured waves,” Journal of Optics, vol. 25, no. 10, p. 103001, 2023.
  14. [14]V. Grillo, E. Karimi, G. C. Gazzadi, S. Frabboni, M. R. Dennis, and R. W. Boyd, “Generation of nondiffracting electron bessel beams,” Physical Review X, vol. 4, no. 1, p. 011013, 2014.DOI
  15. [15]C. Ryu, K. Henderson, and M. Boshier, “Creation of matter wave bessel beams and observation of quantized circulation in a bose–einstein condensate,” New Journal of Physics, vol. 16, no. 1, p. 013046, 2014.DOI
  16. [16]A. V. Afanasev, D. Karlovets, and V. Serbo, “Schwinger scattering of twisted neutrons by nuclei,” Physical Review C, vol. 100, no. 5, p. 051601, 2019.DOI
  17. [17]A. V. Afanasev, D. V. Karlovets, and V. G. Serbo, “Elastic scattering of twisted neutrons by nuclei,” Physical Review C, vol. 103, no. 5, p. 054612, 2021.DOI
  18. [18]J. A. Sherwin, “Scattering of slow twisted neutrons by ortho-and parahydrogen,” Physics Letters A, vol. 437, p. 128102, 2022.DOI
  19. [19]I. Pavlov, A. Chaikovskaia, and D. Karlovets, “Angular momentum effects in neutron decay,” Physical Review C, vol. 111, no. 2, p. 024619, 2025.DOI
  20. [20]M. Maksimov, N. Borodin, D. Kargina, D. Naumov, and D. Karlovets, “Diffraction by circular and triangular apertures as a diagnostic tool of twisted matter waves,” Physical Review A, vol. 112, no. 6, p. 062823, 2025.DOI
  21. [21]D. Sarenac, M. E. Henderson, H. Ekinci, C. W. Clark, D. G. Cory, L. DeBeer-Schmitt, M. G. Huber, C. Kapahi, and D. A. Pushin, “Experimental realization of neutron helical waves,” Science Advances, vol. 8, no. 46, p. eadd2002, 2022.arxiv.org/abs/2205.06263
  22. [22]D. Sarenac, O. Lailey, M. E. Henderson, H. Ekinci, C. W. Clark, D. G. Cory, L. DeBeer-Schmitt, M. G. Huber, J. S. White, K. Zhernenkov, et al., “Generation of neutron airy beams,” Physical Review Letters, vol. 134, no. 15, p. 153401, 2025.DOI
  23. [23]S. Feng and H. G. Winful, “Physical origin of the gouy phase shift,” Optics letters, vol. 26, no. 8, pp. 485–487, 2001.pubmed.ncbi.nlm.nih.gov/18040360
  24. [24]P. Martelli, T. Tacca, A. Gatto, G. Moneta, and M. Martinelli, “Gouy phase shift in nondiffracting bessel beams,” Optics Express, vol. 18, no. 7, pp. 7108–7120, 2010.DOI
  25. [25]G. Guzzinati, P. Schattschneider, K. Y. Bliokh, F. Nori, and J. Verbeeck, “Observation of the larmor and gouy rotations with electron vortex beams,” Physical review letters, vol. 110, no. 9, p. 093601, 2013.pubmed.ncbi.nlm.nih.gov/23496708
  26. [26]H. Rauch and S. A. Werner, Neutron Interferometry: Lessons in Experimental Quantum Mechanics, Wave-Particle Duality, and Entanglement, vol. 12. Oxford University Press; 2 edition, 2015.DOI
  27. [27]V. F. Sears, Neutron Optics: An Introduction to the Theory of Neutron Optical Phenomena and their Applications. New York: Oxford University Press, March 1989.
  28. [28]S. N. Khonina, N. L. Kazanskiy, S. V. Karpeev, and M. A. Butt, “Bessel beam: significance and applications—a progressive review,” Micromachines, vol. 11, no. 11, p. 997, 2020.DOI
  29. [29]A. S. Rao, “A conceptual review on bessel beams,” Physica Scripta, vol. 99, no. 6, p. 062007, 2024.DOI
  30. [30]“NIST Digital Library of Mathematical Functions.” https://dlmf.nist.gov/, Release 1.2.8 of 2026-09-15.
  31. [31]F. W. J. Olver, A. B. Olde Daalhuis, D. W. Lozier, B. I. Schneider, R. F. Boisvert, C. W. Clark, B. R. Miller, B. V. Saunders, H. S. Cohl, and M. A. McClain, eds.arxiv.org/abs/2404.00705
  32. [32]D. Sarenac, M. E. Henderson, H. Ekinci, C. W. Clark, D. G. Cory, L. DeBeer-Schmitt, M. G. Huber, O. Lailey, J. S. White, K. Zhernenkov, et al., “Probing single-particle spatial extent with helical neutron wavefronts,” arXiv preprint arXiv:2606.22922, 2026.
  33. [33]P. Overfelt and C. Kenney, “Comparison of the propagation characteristics of bessel, bessel–gauss, and gaussian beams diffracted by a circular aperture,” Journal of the Optical Society of America A, vol. 8, no. 5, pp. 732–745, 1991.DOI
  34. [34]A. Sokolova, A. E. Whitten, L. De Campo, J. Christoforidis, A. Eltobaji, J. Barnes, F. Darmann, and A. Berry, “Performance and characteristics of the bilby time-of-flight small-angle neutron scattering instrument,” Applied Crystallography, vol. 52, no. 1, pp. 1–12, 2019.DOI
  35. [35]O. Arnold, J.-C. Bilheux, J. Borreguero, A. Buts, S. I. Campbell, L. Chapon, M. Doucet, N. Draper, R. F. Leal, M. C. Gil, et al., “Mantid—data analysis and visualization package for neutron scattering and μ sr experiments,” Nuclear instruments and methods in physics research section a: accelerators, spectrometers, detectors and associated equipment, vol. 764, pp. 156–166, 2014.DOI
  36. [36]A. Sokolova, “Mantid Bilby: Instructions, scripts and test files for BILBY SANS instrument data reduction.” https://github.com/hortica/Mantid_Bilby, 2026. GitHub repository.
  37. [37]O. Lailey, D. Sarenac, C. W. Clark, D. G. Cory, L. DeBeer-Schmitt, H. Ekinci, D. V. Garrad, M. E. Henderson, M. G. Huber, P. Vadnere, et al., “Multimode structured neutron beams,” Optics Express, vol. 34, no. 19, pp. 34960–34967, 2026.arxiv.org/abs/2511.07662
  38. [38]D. Sarenac, O. Lailey, D. Garrad, P. Vadnere, N. Shentevski, C. Clark, D. Cory, J. Cotter, H. Ekinci, M. Huber, et al., “Experimental limit on neutron orbital angular momentum detection using polarized he 3,” Physical Review Research, vol. 8, no. 4, p. 043027, 2026.arxiv.org/abs/2603.16655
  39. [39]N. Geerits, S. Sponar, K. E. Steffen, W. M. Snow, S. R. Parnell, G. Mauri, G. N. Smith, R. M. Dalgliesh, and V. de Haan, “Measuring the angular momentum of a neutron using earth’s rotation,” Physical Review Research, vol. 7, no. 1, p. 013046, 2025.arxiv.org/abs/2407.09307
  40. [40]S. McKay, S. Parnell, R. Dalgliesh, N. Lavrik, I. Kravchenko, Q. Le Thien, D. Baxter, G. Ortiz, and R. Pynn, “Topological shaping of vortex neutron beams using forked phase gratings,” Physical Review Research, vol. 8, no. 2, p. 023199, 2026.
  41. [41]P. Chahal, N. Shentevski, P. Vadnere, D. G. Cory, O. Lailey, D. Pushin, and D. Sarenac, “A generalized k-space coherent averaging method for engineering lattices of spin-orbit beams,” New Journal of Physics, 2026.arxiv.org/abs/2603.13576
  42. [42]N. Geerits, S. Hack, L. Brukner, A. Van Well, S. R. Parnell, H. Abele, and S. Sponar, “A white beam spin echo interferometer for neutron orbital angular momentum generation,” Review of Scientific Instruments, vol. 97, no. 6, 2026.DOI
  43. [43]S. Samiei, “Generalized optical theorem for structured neutron beams and consequences for forward-transmission null tests of time-reversal invariance,” arXiv preprint arXiv:2607.0413, 2026.arxiv.org/abs/2604.27413
  44. [44]A. Afanasiev and C. E. Carlson, “Non-diffractive topological spin textures of relativistic twisted fermion beams,” arXiv preprint arXiv:2607.03474, 2026.
  45. [45]H. Rauch, H. Lemmel, M. Baron, and R. Loidl, “Measurement of a confinement induced neutron phase,” Nature, vol. 417, no. 6889, pp. 630–632, 2002.pubmed.ncbi.nlm.nih.gov/12050660
  46. [46]R. Ropp, A. Dudley, C. López-Mariscal, and A. Forbes, “Measuring the rotation rates of superpositions of higher-order bessel beams,” Journal of Modern Optics, vol. 59, no. 3, pp. 259–267, 2012.
  47. [47]V. Grillo, T. R. Harvey, F. Venturi, J. S. Pierce, R. Balboni, F. Bouchard, G. Carlo Gazzadi, S. Frabboni, A. H. Tavabi, Z.-A. Li, et al., “Observation of nanoscale magnetic fields using twisted electron beams,” Nature communications, vol. 8, no. 1, p. 689, 2017.DOI
  48. [48]M. r. Dhanalakshmi Veeraraj, D. Qu, S. Zhao, P. Qi, K. Jefimovs, M. Busi, J. Kohlbrecher, C. David, M. Strobl, and J. Vila-Comamala, “Diffractive lenses for neutron techniques,” Scientific Reports, vol. 15, no. 1, p. 8408, 2025.DOI
  49. [49]M. r. Dhanalakshmi Veeraraj, D. Qu, H-Y. Chen, S. Strebel, P. Qi, A. Fedrigo, L. Helfen, A. Tengattini, M. Busi, H. Wang, et al., “An achromatic neutron lens,” Nature Communications, 2026.DOI
  50. [50]A. S. Ostrovsky, C. Rickenstorff-Parrao, and V. Arrizón, “Generation of the perfect optical vortex using a liquid-crystal spatial light modulator,” Opt. Lett., vol. 38, pp. 534–536, Feb 2013.DOI

Paper details

vlnc:W_zzbzhur7
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 4

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents