This paper proposes a vertical segmented waveguide-enabled pinching antenna (V-SWAN)-assisted downlink non-orthogonal multiple access (NOMA)-integrated sensing and communication (ISAC) environmental division multiple access (EDMA) framework for simultaneously supporting multi-user communication and target sensing. In the proposed framework, multiple pinching antennas (PAs) are deployed along a segmented vertical dielectric waveguide to serve communication users (CUs), aerial users (AUs), and sensing target (ST). CUs are distributed on the ground, whereas AUs and ST are above the ground, where line-of-sight (LoS) and non-line-of-sight (NLoS) propagation conditions coexist. In particular, SWAN provides an effective platform for realizing EDMA by reducing the effective propagation distance and in-waveguide attenuation, thereby suppressing co-channel interference and enabling efficient multi-user transmission. The communication and sensing model are formulated, followed by the corresponding SINR expressions. We formulate the statistical characterizations for the combination of LoS and NLoS propagation for CUs, and LoS propagation for AUs and sensing channels for generalized multi-user, multi-PA scenarios. Based on these statistical characterizations, the segment outage and sensing outage probabilities are derived and evaluated for the generalized framework. The asymptotic evaluation is also done at a high transmit signal-to-noise ratio (SNR) to gain further insights. The results show that the proposed framework outperforms the conventional H-SWAN and single vertical pinching antenna system (V-PASS) in terms of segment outage probability, sensing outage probability, and segment sum rate. Monte Carlo simulation results closely match the analytical results, validating the accuracy of the derived expressions.
Introduction
S. Bhattacharyya and K. Singh are with the Institute of Communications Engineering, National Sun Yat-sen University, Kaohsiung 80424, Taiwan (e-mail: [email protected], [email protected]).
M.-L. Ku is with the Department of Communication Engineering, National Central University, Taoyuan City 32001, Taiwan (e-mail: [email protected]).
B. Kumbhani is with the Department of Electrical Engineering, Indian Institute of Technology Ropar, Punjab - 140001, India (e-mail: [email protected]).
The growing demand for high-data-rate wireless communication systems is shifting towards millimetre-wave (mmWave) and terahertz (THz) bands for higher bandwidth. However, these high-frequency bands also overlap with those used for radar sensing. Emerging applications such as augmented reality/virtual reality (AR/VR), Internet of Everything (IoE), and autonomous ground and aerial vehicles require both high-data-rate communication and reliable sensing capabilities. This motivates the integration of communication and sensing within the same platform. Implementing both functions as standalone systems requires redundant hardware deployment and results in high operational costs [1]. Integrated sensing and communication (ISAC) enables both functionalities by sharing the same spectrum, hardware, and signal-processing resources, thereby improving spectrum efficiency and reducing system complexity [2, 3]. Moreover, ISAC has recently attracted significant attention as a key technology for future sixth-generation (6G) networks, supporting advanced applications such as smart healthcare, environmental monitoring, and smart infrastructure [4]. Despite these advantages, ISAC operation also faces challenges due to multipath propagation, line-of-sight (LoS) blockage, clutter, and mutual interference between sensing and communication, which can significantly degrade performance even over short or moderate transmission distances[5]. In practical ISAC systems, multiple communication users (CUs) and sensing targets (STs) are present and need to be served simultaneously, which increases interference and makes simultaneous operation challenging. To address this problem, multiple-input multiple-output (MIMO) can be integrated with ISAC to provide diversity, multiplexing, and array gains, while also enabling spatial beamforming for multiple CUs and STs. Thus, MIMO-ISAC provides an effective approach for improving communication and sensing performance while managing interference in multi-user and multi-target scenarios [6, 7]. However, in conventional MIMO systems, the antennas are deployed at fixed locations. Therefore, in the presence of obstacles such as large buildings or trees, the fixed antenna positions provide limited flexibility to avoid blockage and interference, which may degrade the communication performance. To address the above issues, recent studies have explored flexible and reconfigurable antenna technologies, including movable antennas (MAs) [8], fluid antennas (FAs) [9], and reconfigurable intelligent surfaces (RISs) [10]. MAs mechanically adjust their antenna positions according to the users positions and varying channel conditions, while FAs employ conductive liquids in a dielectric medium to dynamically modify the antenna position and radiation characteristics. These two provide antenna position as an additional spatial degree of freedom, allowing it to be adjusted according to user requirements. Meanwhile, RISs reconfigure the wireless propagation environment by adjusting the phase shifts of the incident signals at their reflecting elements to mitigate interference and bypass obstacles. Owing to these advantages, these technologies have also found applications in ISAC systems [11, 12, 13]. While FAs and PAs have shown performance benefits, their benefits are limited as they can only move or change their antenna positions within a few wavelengths, which has a negligible effect on the large-scale path loss. Moreover, once they are deployed in the system, they cannot be easily reconfigured.
To overcome the aforementioned limitations, recently pinching antenna systems (PASS) have been developed which has caught the attention of researchers owing to its ability to mitigate large scale path loss effects [14]. PASS uses a dielectric waveguide as a transmission medium along which multiple PAs are deployed at different locations [15]. The signal propagating through the waveguide is radiated into free space through these PAs, which can be placed close to the intended users to improve the propagation conditions and mitigate the impact of large-scale path loss and blockage [16]. Owing to these advantages, several recent studies have investigated the performance and design aspects of PASS [17, 18, 19, 20]. In [19], the authors derived analytical expressions for the outage probability and average rate for PASS while incorporating both free-space path loss and waveguide attenuation under realistic conditions. In another paper [20], authors investigated multi-waveguide PASS for multi-user communication and proposed three transmission structures, namely waveguide multiplexing (WM), waveguide division (WD), and waveguide switching (WS). The PA beamforming and baseband signal processing were optimized to improve the max-min fairness (MMF) performance compared with a conventional fixed-position antenna system. In addition to this, PASS has recently attracted attention for its potential use in ISAC system [1, 21, 22]. In [21] the authors derived a closed-form Cramér–Rao lower bound (CRLB) for a PASS-assisted ISAC system and showed a significant reduction in the CRLB value compared to the conventional framework. In [22], the author proposed a multi-waveguide PASS-assisted ISAC system, where the PA deployment and beamforming are jointly optimized to minimize the sensing CRLB while satisfying communication QoS and transmit power constraints. However, conventional horizontal PASS is mainly designed to serve ground users and is confined to two-dimensional (2D) coverage [19, 20], which limits its ability to support the aerial communication envisioned for sixth-generation (6G) networks [23]. In particular, unmanned aerial vehicles (UAVs) are increasingly used for applications such as urban logistics delivery, emergency services, air traffic management, and logistics support in mountainous areas. To address the aforementioned issues, vertical PASS has been introduced, where PAs are deployed along a vertical dielectric waveguide to extend the coverage from the conventional 2D plane to 3D space [24, 25]. However, conventional PASS uses a single waveguide for all the PAs, which can result in high in-waveguide attenuation loss and the inter-antenna radiation (IAR) effect and degraded system performance. In particular, the received signal captured by one selected PA and guided via waveguide to the access point can be re-radiated by other PAs, making the received signal model more complicated and also introducing inaccuracies in the model.
To address this issue, a segmented waveguide-enabled pinching antenna system (SWAN) is used, which divides the waveguide into multiple shorter segments having their own feed point (FP), reducing the in-waveguide distance through which the signal travels within the waveguide, as a result, the attenuation loss is also reduced [26]. In this design, the segments are isolated to prevent in-waveguide propagation across different segments, enabling the use of multiple PAs while avoiding complex electromagnetic modeling at each PA. Also, in terms of reliability, replacing a faulty segment is more cost-effective and less disruptive than replacing the entire long waveguide. All these advantages are also applicable to ISAC system [27, 28]. In [27], the author implemented a hybrid segment selection and multiplexing (HSSM) protocol to provide favorable performance with lower hardware cost. Similarly, in [28], to balance performance and complexity, the authors proposed three transceiver protocols: segment selection which selects a single segment for signal transmitting, segment aggregation which combines signals from all segments using a single RF chain, and segment multiplexing which jointly processes the signals from all segments using individual RF chains.
On the other hand, the increasing demand for higher data rates has drawn attention to multiple access (MA) techniques such as non-orthogonal multiple access (NOMA), space division multiple access (SDMA), and orthogonal multiple access (OMA). However, these techniques are limited to conventional domains such as time, frequency, space, code, and power. Motivated by this, [29] proposed an environmental division multiple access technique (EDMA), in which key propagation characteristics, such as LoS blockage and large-scale path loss, are exploited to suppress co-channel interference and enable efficient multiple access (MA) transmission. However, traditional waveguides suffer often from in-waveguide losses. To address this, SWAN provides an efficient platform for EDMA by reducing effective propagation distance, reducing in-waveguide attenuation, and suppressing co-channel interference, thereby enhancing overall system performance. Although SWAN-based EDMA effectively mitigates the multi-user interference through environmental separation and waveguide segmentation, existing studies mainly focus on single-user transmission within each segment [29]. Practically, multiple users can coexist within the same segment, which makes single-user transmission inefficient in terms of spectrum utilization. So, simultaneous transmission of multi-users within each segment is essential for improving system efficiency. For this, integrating multiple access techniques like NOMA into EDMA becomes a promising solution for serving multiple users simultaneously [30]. Based on the literature survey, only the authors in [24] have recently investigated the V-PASS architecture, accounting for the combined effects of in-waveguide and free-space propagation losses. However, their study is limited to UAV communication involving a single waveguide and a single PA. Moreover, as discussed earlier, a single-waveguide architecture can suffer from considerable in-waveguide attenuation. This motivates the development of the V-SWAN architecture, where multiple waveguides and multiple PAs can reduce the effective in-waveguide propagation distance and thereby mitigate attenuation while providing greater spatial flexibility for serving distributed users and supporting sensing functionalities. To address this research gap, we propose a V-SWAN-assisted downlink NOMA-ISAC EDMA framework to simultaneously support multi-user communication and target sensing. The main contributions can be highlighted as follows:
Introduction to V-SWAN Assisted downlink NOMA-ISAC EDMA Framework: We propose a generalised V-SWAN-assisted downlink NOMA-ISAC EDMA framework, where multiple PAs are deployed in each segment to serve multiple users and ST simultaneously. The users are categorised as CUs and aerial users (AUs). The CUs are distributed on the ground, so there are heterogeneous propagation conditions with both LoS and non-line-of-sight (NLoS) links, whereas AUs and ST are distributed above ground, and for these, LoS conditions are considered. Based on this framework, a generalised received signal model for communication and sensing is developed, followed by the corresponding signal-to-interference-plus-noise ratio (SINR) expression.
Multi-user Multi-PA Performance Evaluation:
The proposed framework is generalised for multi-user and multi-PA scenarios. Since each segment serves multiple users, the overall segment performance is evaluated in terms of segment outage probability and segment sum rate. Sensing outage probability is evaluated for a single target. Further, these performance metrics are compared with conventional H-SWAN and V-PASS frameworks.
The asymptotic evaluation of the proposed V-SWAN frameworks at high SNR limits the behaviour of the proposed framework due to interference-limited SNR.
Segment Outage Analysis: Users and the target are distributed in different environments,Where CUs are distributed on the ground, and AUs and ST are above the ground, their effective channel is different due to the superposition of different PA contributions with in-waveguide attenuation, phase variation, and user-dependent wireless communication.
Communication Outage: The CU channel consists of both LoS and NLoS components, whereas the AU channel is LoS. In both cases, the effective channel is approximated by a moment-matched complex random variable with a nonzero mean, and channel power follows a non-central chi-square distribution. Based on this characterization, the user outage probability is evaluated using numerical integration, which
is further used to calculate the segment outage probability.
Sensing Outage: The ST channel is LoS, and the forward channel is approximated using moment matching, while the backward path is characterised by conditioning on the ST location and the selected receiving PA. Thus, the backward channel is deterministic, and its PDF and CDF are obtained accordingly. Based on this, the sensing outage is evaluated using numerical integration.
Performance Comparison: Extensive numerical results are presented to validate the analytical expression obtained from the proposed VSWAN-assisted downlink NOMA-ISAC EDMA framework for outage analysis, varying in-waveguide attenuation, different user distributions, power allocation, and sensing-related parameters, which affect the performance of communication and sensing. The obtained results outperform the existing conventional PASS framework, and the results of the analytical expression closely match with Monte Carlo simulation, confirming the accuracy of the proposed method.
Notations Used: The notations and mathematical operators used in this paper are listed in Table I
Symbols
Description
General System Parameters
X,Y,D
Serving area length, width and height, respectively
L
Total number of segments
Al,Fl
Denotes lth segment and FP of lth segment
Al,seg
Segment Length of Al
M
Total number of PAs in each segment
κ
In-waveguide attenuation coefficient
ηeff
Effective refractive index
c,fc
Speed of light and carrier frequency, respectively
ΩFl,ΩPl,m
Coordinates of FP of Al and mth PA of Al, respectively
Pl,m
Transmit Power of mth PA of Al
ψl
ISAC signal of Al
hl,m,hl
In-waveguide channel between Fl and mth PA and channel vector of Al, respectively
Communication Parameters
hl,kq,m
Channel between mth PA of Aq and kth the user of Al
hl,kq
Channel vector between M PAs of qth and kth user of Al
θq,m,l,k
LoS indicator between mth PA of Aq and kth the user of Al
hl,keff,q
Effective channel between Fq of Aq and kth user of Al
ν
Path loss factor
ϕ
LoS blockage parameter
gq,m,l,k
Rayleigh fading coefficient between mth PA of Aq and kth user of Al
KR
Rician factor
K
Total No. of users in each segment
ΩCUk,ΩAUl,k
Coordinates of kth CU and kth AU of Al respectively
α
Power allocation factor for communication
bl,k
NOMA power-allocation coefficient of kth user of Al
nl,k
Background noise at kth users of Al
Sensing Parameters
1−α
Power allocation factor for sensing
ΩTl
Coordinates of ST of Al
σT
Radar cross section (RCS) of the ST
hl,Tq,m
Forward channel between mth PA of Aq and ST of Al
hl,Tq
Forward channel vector between M PAs of Aq and ST of Al
h~l,sen
Effective forward channel between FP and ST of Al
P^l,m
Selected PA for reception of reflected signal
h~l,m
Backward channel between mth PA and Fl of Al
h~T,l
Backward channel between ST and selected P^l,m PA of Al
ns,l
Background noise at AP for sensing
β
Spectrum allocation factor
Mathematical Operators
j,∥⋅∥,∣⋅∣
Imaginary unit −1, Euclidean Norm, Absolute value, respectively
E[⋅]
Expectation operator
Table I. List of Notation and Mathematical Operations
Organization of the paper: The remainder of the paper is organised as follows. Section II presents the system model and SINR formulations. Section III provides channel characterization and the outage analysis of the multi-user and multi-PA scenario. Section IV presents the analytical and simulation results, and Section V concludes the paper.
System Model
Let us consider a V-SWAN-assisted downlink NOMA-ISAC EDMA framework as illustrated in Figure 1. The complete service region of the proposed framework is given by X×Y×D, where X and Y denote the length and width of the considered area, respectively, while D denotes the height of the waveguide. V-SWAN is mounted on a mechanical support and extends vertically along the z-axis. The system consists of L non-overlapping segments denoted by Al, where l∈{1,2,…,L} with each segment having equal length given by Al,seg=LD, equipped with a dedicated feed point (FP) and is connected to a single access point (AP) through a dedicated radio-frequency (RF) chain, through which the RF signal is injected into the waveguide. It is also equipped with M PAs that radiate the guided RF signal into free space. Let Fl denote the FP, while M is the number of PAs randomly distributed within each segment Al. Cartesian coordinates of Fl are given as ΩFl=[0,0,ZFl] and, for simplicity, FP is assumed to be located at the top of each segment. PAs are represented as Pl={Pl,1,Pl,2,…,Pl,M} with m∈{1,2,…,M}, and its Cartesian coordinates are given by ΩPl,m=[0,0,ZPl,m], where ZPl,m∈((l−1)Al,seg,lAl,seg).
Figure 1. An illustration of the proposed V-SWAN assisted downlink NOMA-ISAC EDMA framework.
References
[1]W. Mao, Y. Lu, Y. Xu, B. Ai, O. A. Dobre, and D. Niyato, “Multi-antenna enabled wide pinching antennas for ISAC,” IEEE Trans. Wireless Commun., vol. 25, pp. 5846–5858, 2026.
[2]F. Liu et al., “Integrated sensing and communications: Toward dual-functional wireless networks for 6G and beyond,” IEEE J. Sel. Areas Commun., vol. 40, no. 6, pp. 1728–1767, 2022.DOI
[3]M. Liu, P. Fu, C. Maosouros, B. Clerckx, Y. H. Kim, A. Nallanathan, and F. Wang, “Multiple access enabled integrated sensing and communication with imperfect SIC: Non-orthogonal versus rate splitting,” IEEE Trans. Wireless Commun., vol. 25, pp. 8835–8400, 2026.DOI
[4]M. U. F. Qaisar, W. Yuan, Q. Günüü, T. Riihonen, Y. Cui, L. Zhang, N. Gonzalez-Prelcic, M. D. Renzo, and Z. Han, “The role of ISAC in 6G networks: Enabling next-generation wireless systems,” IEEE Trans. Netw. Sci. Eng., vol. 13, pp. 7825–7861, 2026.DOI
[5]D. Zhang et al., “Integrated sensing and communications over the years: An evolution perspective,” IEEE Commun. Surv. Tut., vol. 28, pp. 5014–5048, 2026.
[6]C. Meng, Z. Wei, D. Ma, L. Su, and Z. Feng, “Multiobjective-optimization-based transmit beamforming for multitarget and multiuser MIMO-ISAC systems,” IEEE Internet Things J., vol. 11, no. 18, pp. 2960–29 274, 2024.DOI
[7]Q. Shi, Y. Wang, Z. Zhou, G. Cui, and P. Fan, “Low probability of intercept signal design for MIMO integrated sensing and communication systems,” IEEE Trans. Commun., vol. 73, no. 9, pp. 8155–8165, 2025.DOI
[8]L. Zhu, W. Ma, and R. Zhang, “Movable antennas for wireless communication: Opportunities and challenges,” IEEE Commun. Mag., vol. 62, no. 6, pp. 114–120, 2024.arxiv.org/abs/2306.02331
[9]Z. Ding, R. Schober, and H. Vincent Poor, “Flexible-antenna systems: A pinching-antenna perspective,” IEEE Trans. on Commun., vol. 73, no. 10, pp. 9236–9253, 2025.arxiv.org/abs/2412.02376
[10]W. Ma et al., “A survey on reconfigurable and movable antennas for wireless communications and sensing,” IEEE Commun. Surv. Tut., vol. 28, pp. 4842–4882, 2026.DOI
[11]G. Chen, Q. Wu, S. Lu, M. Hua, and W. Chen, “Multi-IRS-aided ISAC system: Multi-path exploitation versus reduction,” IEEE Trans. Wireless Commun., vol. 25, pp. 13 351–13 368, 2026.arxiv.org/abs/2506.21968
[12]W. Lyu, S. Yang, Y. Xiu, Z. Zhang, C. Assi, and C. Yuen, “Movable antenna enabled integrated sensing and communication,” IEEE Trans. Wireless Commun., vol. 24, no. 4, pp. 2862–2875, 2025.arxiv.org/abs/2410.19763
[13]Y. Chen, Q. Xue, C. Ouyang, Z. Li, Y. Wang, and M. Hua, “Pinching-antenna-enabled ISAC: A unified architecture for flexible communication and sensing,” arXiv preprint arXiv:2609.18083, 2026.arxiv.org/abs/2609.18083
[14]H. O. Y. Suzuki and K. Kawai, “Pinching antenna: Using a dielectric waveguide as an antenna,” NTT DOCOMO Tech. J., vol. 23, no. 3, pp. 5–12, 2022.
[15]S. Bhattacharyya, S. Kumar, K. Singh, and C.-P. Li, “Performance analysis of RSMA-enabled SWIPT in pinching antenna systems,” IEEE Wireless Commun. Lett., vol. 15, pp. 4454–4458, 2026.DOI
[16]Z. Ding and H. Vincent Poor, “LoS blockage in pinching-antenna systems: Curse or blessing?” IEEE Wireless Commun. Lett., vol. 14, no. 9, pp. 2798–2802, 2025.
[17]Z. Wang, C. Ouyang, X. Mu, Y. Liu, and Z. Ding, “Modeling and beamforming optimization for pinching-antenna systems,” IEEE Trans. Commun., vol. 73, no. 12, pp. 13 904–13 919, 2025.DOI
[18]Y. Liu, H. Jiang, X. Xu, Z. Wang, J. Guo, C. Ouyang, X. Mu, Z. Ding, A. Nallanathan, G. K. Karagiannidis, and R. Schober, “Pinching-antenna systems (PASS): A tutorial,” IEEE Trans. Commun., vol. 74, pp. 4881–4918, 2026.DOI
[19]D. Tyrovolas, S. A. Tegos et al., “Performance analysis of pinching-antenna systems,” IEEE Trans. Cogn. Commun. Netw., vol. 12, pp. 590–601, 2026.arxiv.org/abs/2502.06701
[20]J. Zhao, H. Song, X. Mu, K. Cai, Y. Zhu, and Y. Liu, “Pinching-antenna systems-enabled multi-user communications: Transmission structures and beamforming optimization,” IEEE Trans. Commun., vol. 74, pp. 2316–2330, 2026.arxiv.org/abs/2508.14458
[21]Z. Ding, “Pinching-antenna assisted ISAC: A CRLB perspective,” npj Wireless Technol., vol. 1, no. 1, p. 4, 2025.arxiv.org/abs/2504.05792
[22]H. Li, R. Zhong, Z. Pan, C. Dong, J. Lei, and Y. Liu, “Pinching antenna systems for integrated sensing and communications,” IEEE Trans. Wireless Commun., vol. 25, pp. 13 416–13 429, 2026.arxiv.org/abs/2508.19540
[23]M. Vaezi, A. Azari, S. R. Khosraviard, M. Shirvanimoghaddam, M. M. Azari, D. Chasaki, and P. Popovski, “Cellular, wide-area, and non-terrestrial IoT: A survey on 5G advances and the road toward 6G,” IEEE Commun. Surv. Tut., vol. 24, no. 2, pp. 1117–1174, 2022.DOI
[24]T. Wang, K. Cao, Y. Qu, L. Lv, X. Lei, D. Tyrovolas, and P. D. Diamantoulakis, “Vertical pinching antenna systems (V-PAS) aided UAV communications,” arXiv preprint arXiv:2607.23184, 2026.arxiv.org/abs/2607.23184
[25]Q. Gao, R. Zhong, Y. Liu, H. Shin, and Y. Liu, “RL-based beamforming optimization for 3D pinching antenna assisted ISAC systems,” IEEE Trans. Veh. Technol., vol. 75, no. 8, pp. 18 643–18 648, 2026.
[26]C. Ouyang, H. Jiang, Z. Wang, Y. Liu, and Z. Ding, “Uplink and downlink communications in segmented waveguide-enabled pinching-antenna systems (SWANs),” IEEE Trans. Commun., vol. 74, pp. 3688–3703, 2026.arxiv.org/abs/2509.10666
[27]Q. Gao, R. Zhong, H. Shin, and Y. Liu, “Integrated sensing and communication for segmented waveguide-enabled pinching antenna systems,” arXiv preprint arXiv:2601.20658, 2026.arxiv.org/abs/2601.20658
[28]H. Jiang, C. Ouyang, Z. Wang, Y. Liu, A. Nallanathan, Z. Ding, and R. Schober, “Segmented waveguide-enabled pinching-antenna systems (SWANs) for ISAC,” arXiv preprint arXiv:2512.07649, 2025.arxiv.org/abs/2512.07649
[29]Z. Ding, R. Schober, and H. V. Poor, “Environment division multiple access (EDMA): A feasibility study via pinching antennas,” IEEE Trans. Wireless Commun., vol. 25, pp. 15 675–15 691, 2026.arxiv.org/abs/2511.03820
[30]S. Bhattacharyya, S. Mondal, K. Singh, and C.-P. Li, “Performance analysis of pinching Antenna-Assisted EDMA-NOMA transmissions,” in GLOBECOM 2026 IEEE Global Commun. Conf., 2026, pp. 1–6.
[31]Y. Xu, Y. Lu, Z. Ding, and T.-H. Chang, “Pinching-antenna system design under random LoS and NLoS channels,” IEEE Trans. Wireless Commun., vol. 25, pp. 18 440–18 455, 2026.arxiv.org/abs/2512.04719
[32]Z. Sun, X. Mu, S. Han, S. Xu, and M. Matthaiou, “Pinching-antenna-enabled cognitive radio networks,” IEEE Trans. Commun., vol. 74, pp. 9185–9199, 2026.arxiv.org/abs/2511.13272
[33]S. Bhattacharyya, S. Kumar, K. Singh, and C.-P. Li, “Pinching antenna assisted integrated sensing and communication using quadrature RSMA,” arXiv preprint arXiv:2609.05987, 2026.arxiv.org/abs/2609.05987
[34]A. Agarwal, R. Chaurasiya, S. Rai, and A. K. Jagannatham, “Outage probability analysis for NOMA downlink and uplink communication systems with generalized fading channels,” IEEE Access, vol. 8, pp. 220 461–220 481, 2020.DOI
[35]D. Bozanis, V. K. Papanikolaou, S. A. Tegos, and G. K. Karagiannidis, “Cramér-rao bounds for integrated sensing and communications in pinching-antenna systems,” in Proc. IEEE PIMRC, 2025, pp. 1–6.DOI
[36]L. Wang, M. ElKashlan, R. W. Heath, M. Di Renzo, and K.-K. Wong, “Millimeter wave power transfer and information transmission,” in GLOBECOM 2015 IEEE Global Commun. Conf. IEEE, 2015, pp. 1–6.
[37]A. Atalik, A. Köse, and M. Gastpar, “Differential entropy of the conditional expectation under additive gaussian noise,” IEEE Trans. Signal Process., vol. 70, pp. 4851–4866, 2022.DOI
[38]S. Kumar, K. Singh, and C.-P. Li, “Performance analysis for rate splitting multiple access enhanced pinching-antenna assisted integrated sensing and communication systems,” IEEE Trans. Wireless Commun., vol. 25, pp. 18 023–18 038, 2026.DOI