betaFeedback

WorksPhysics and Astronomy

Magnetic field amplification during a turbulent collapse

Abstract

The question of whether a dynamo can be triggered by gravitational collapse is of great interest, especially for the early Universe. Here, we employ supercomoving coordinates to study the magnetic field amplification from decaying turbulence during gravitational collapse. We perform three-dimensional simulations and show that for large magnetic Reynolds numbers there can be exponential growth of the comoving magnetic field with conformal time before the decay of turbulence impedes further amplification. The collapse dynamics only affects the nonlinear feedback from the Lorentz force, which diminishes more rapidly for shorter collapse times, allowing nearly kinematic continued growth. We confirm that helical turbulence is more efficient in driving dynamo action than nonhelical turbulence, but this difference decreases for larger collapse times. We also show that for nearly irrotational flows, dynamo amplification is still possible, but it is always associated with a growth of vorticity – even if it still remains very small. In nonmagnetic runs, the growth of vorticity is associated with viscosity and grows with the Mach number. In the presence of magnetic fields, vorticity emerges from the curl of the Lorentz force. During a limited time interval, an exponential growth of the comoving magnetic field with conformal time is interpreted as clear evidence of dynamo action.

Introduction

The hypothesis that dynamo action is ubiquitous in astrophysical plasmas was introduced in the 1950s, but it faced skepticism due to various antidynamo theorems [9, 19]. While initially the community focused on large-scale dynamos in the Sun [31, 39] and galaxies [43] (Parker 1971), the advance of powerful computers brought significant attention to small-scale dynamos at the scale of turbulence; see Meneguzzi et al. [29] for the first simulations and Kazantsev [23] for the underlying theory, as well as Kulsrud & Anderson [25] for an independent and more detailed derivation. By now, it is clear that three-dimensional turbulence always leads to dynamo action when the plasma is sufficiently well conducting; see Brandenburg & Ntormousi [6] for a recent review. This behavior implies that part of the kinetic energy in the turbulence is almost always converted into magnetic energy.

Collapse flows are particularly compelling for dynamo action. Since gravitational collapse provides a strong source of kinetic energy, it can enhance the magnetization of collapsing structures by sustaining or introducing turbulence in the flow. This mechanism is very relevant for galactic magnetism. Recently, there have been claims of strong (∼μG\sim\mu\mathrm{G} or stronger) large-scale coherent galactic magnetic fields at redshifts up to 5.6 [15, 8]. Assuming only tiny primordial seed magnetic fields, there might not be enough time for a high-redshift galaxy to build strong enough magnetic fields through mean-field dynamo action. An early amplification of a tiny initial seed through a small-scale dynamo [3], especially during the gravitational collapse of the initial halo, could alleviate this problem.

Another relevant situation is star formation in the early Universe. Primordial molecular clouds with initially negligible magnetic fields can become increasingly magnetized as they collapse, an effect that is known to play a crucial role in the star formation process [32].

Despite its relevance to various astrophysical environments, gravitational collapse dynamos have not yet been convincingly demonstrated. The main reason is that characterizing dynamos in unsteady flows is inherently challenging. For steady flows, we can always formulate an eigenvalue problem, provided the magnetic field is still weak and unaffected by the feedback from the Lorentz force, which affects the flow amplitude. It is even possible to prove that there is no eigenfunction with a nonvanishing eigenvalue when the magnetic diffusivity is strictly zero [30]. Unsteady flows present a significant complication because, in that situation, the kinematic growth or decay of the magnetic field is no longer exponential. The problem becomes approachable if the flow is statistically steady, i.e., the level of turbulence remains constant over time. In such cases, the energy spectrum grows at all wavenumbers at the same rate [40]. This behavior is suggestive of the existence of an eigenfunction of the type discussed by Kazantsev [23]. However, many astrophysical flows, such as gravitational collapse, are not even statistically steady. Dynamo research in these cases is still in its infancy.

In a series of numerical simulations of isolated turbulent collapsing molecular clouds, Sur et al. [42, 41] and Federrath et al. [14] reported a significant amplification of the magnetic field. However, in the absence of a proper criterion for dynamo action due to the inherent difficulties described above, these works defined dynamo action as any excess growth above the field B∝ρ2/3B \propto\rho^{2/3} expected by gravitational collapse as the density ρ\rho increases. Other works studying magnetic field growth in collapse flows (e.g., [36] (Xu & Lazarian 2020)) explicitly integrated the evolution of the magnetic field through a turbulent dynamo.

A common problem faced in collapse simulations is to identify dynamo action when other amplification mechanisms, such as tangling or compression, are also active. In this context, we proposed a criterion for dynamo action in unsteady flows based on the work done against the Lorentz force [5]. Furthermore, by calculating the work against various forces, we emphasized that the Jeans instability drives predominantly irrotational motions, which are unlikely to account for any dynamo action observed in our simulation, except for an early period before the collapse becomes more significant.

Kinetic helicity—a measure of the alignment between velocity and vorticity—is not necessary for dynamo action. However, if present, it lowers the critical conductivity needed to overcome the effects of Joule dissipation [16]. Otherwise, resistive losses prematurely convert magnetic energy into heat before the field can reach sufficient strength.

A collapsing flow can produce vorticity through viscosity (especially in shocks), the baroclinic term, and magnetic fields. However, which of these processes is active during collapse is currently unknown. To isolate the effects related to the collapse dynamics, Irshad P et al. (2025) employed the supercomoving coordinates of Shandarin [37], where the conformal time tt is related to the physical time tpht_{\rm ph} through dt=dtph/a2dt = dt_{\rm ph}/a^2, and a(t)a(t) is the scale factor; see also Martel & Shapiro [26] for a detailed presentation of the supercomoving coordinates in magnetohydrodynamics. Irshad P et al. (2025) employed a supercomoving coordinate system that follows the self-gravitating collapse. These coordinates enabled them to maintain sufficient numerical resolution throughout the entire collapse, which is another common problem faced in collapse simulations, including ours of 2022.

Irshad P et al. (2025) found superexponential growth of the magnetic field as a result of the increasing turnover rate and saturation field strengths over the expectations from flux freezing. They applied a solenoidal forcing function with and without kinetic helicity. The present work aims to study decaying turbulence during gravitational collapse by employing supercomoving coordinates and allowing not only for cases without initial kinetic helicity but also cases with or without initial vorticity, i.e., acoustic turbulence.

Our model

Supercomoving coordinates

We employ supercomoving coordinates using the same definition of the scale factor as Irshad P et al. (2025), i.e.,

a(t)=(1+s2t2/4)−1,(1)a(t) = (1 + s^2 t^2/4)^{-1}, \tag*{(1)}

where tt is the conformal time, ss is a freefall parameter, which is related to the freefall time tff=π/2st_{\rm ff} = \pi/2s. The physical time tpht_{\rm ph} is then given by

tph(t)=∫0ta2(t′) dt′,(2)t_{\rm ph}(t) = \int_0^t a^2(t')\,dt', \tag*{(2)}

which is defined in the range 0≤tph≤tff0 \leq t_{\rm ph} \leq t_{\rm ff}.

The supercomoving coordinates stretch the finite time singularity at tfft_{\rm ff} to infinity while also limiting the comoving magnetic field strength according to

B=a2Bph,(3)B = a^2 B_{\rm ph}, \tag*{(3)}

where BphB_{\rm ph} is the physical magnetic field.

Governing equations

We solve the MHD equations with an isothermal equation of state, where the pressure pp and density ρ\rho are related to each other through p=ρcs2p = \rho c_{\mathrm{s}}^2 with cs=constc_{\mathrm{s}} = \mathrm{const} being the isothermal sound speed. We apply an initial velocity field u\mathbf{u}, which leads to a turbulent evolution. We also apply an initial seed magnetic field B\mathbf{B}. To ensure that B\mathbf{B} remains solenoidal, we solve for the magnetic vector potential A\mathbf{A} so that B=∇×A\mathbf{B} = \nabla\times\mathbf{A}. The evolution equations for A\mathbf{A}, u\mathbf{u}, and ρ\rho are given by

∂A∂t=u×B+η∇2A,(4)\frac{\partial\mathbf{A}}{\partial t} = \mathbf{u} \times\mathbf{B} + \eta\nabla^2 \mathbf{A}, \tag*{(4)}
DuDt=−cs2∇ln⁡ρ+ρ−1[a(t)J×B+∇⋅(2νρS)],(5)\frac{\mathrm{D}\mathbf{u}}{\mathrm{D}t} = -c_{\mathrm{s}}^2 \nabla\ln\rho+ \rho^{-1}\left[a(t)\mathbf{J} \times\mathbf{B} + \nabla\cdot(2\nu\rho\mathbf{S})\right], \tag*{(5)}
Dln⁡ρDt=−∇⋅u,(6)\frac{\mathrm{D}\ln\rho}{\mathrm{D}t} = -\nabla\cdot\mathbf{u}, \tag*{(6)}

where J=∇×B/μ0\mathbf{J} = \nabla\times\mathbf{B}/\mu_0 is the current density with μ0\mu_0 being the vacuum permeability, J×B\mathbf{J} \times\mathbf{B} is the Lorentz force, S\mathbf{S} the rate-of-strain tensor with the components Sij=12(∂iuj+∂jui)−13δij∇⋅uS_{ij} = \frac{1}{2}(\partial_i u_j + \partial_j u_i) - \frac{1}{3}\delta_{ij}\nabla\cdot\mathbf{u} and ν\nu is the kinematic viscosity.

Initial conditions and parameters

We consider a cubic domain of size L3L^3 with periodic boundary conditions. The lowest wavenumber in the domain is then k1≡2π/Lk_1 \equiv2\pi/L. Owing to the use of periodic boundary conditions, the mass in the domain is conserved, so the mean density is a constant, which defines our reference density ρ0≡ρ‾\rho_0 \equiv\overline{\rho}. In the numerical simulations, we set cs=k1=ρ0=1c_{\mathrm{s}} = k_1 = \rho_0 = 1.

We construct our initial velocity in Fourier space (indicated by a tilde) as u~(k)=M(k)S(k)\widetilde{\mathbf{u}}(\mathbf{k}) = \mathbf{M}(\mathbf{k})\mathbf{S}(\mathbf{k}). Here

Sj(k)=r(k,j)k0−3/2(k/k0)1+(k/k0)17/6,(7)S_j(\mathbf{k}) = r(\mathbf{k},j)\frac{k_0^{-3/2}(k/k_0)}{1+(k/k_0)^{17/6}}, \tag*{(7)}

where r(k,j)r(\mathbf{k},j) is a Gaussian-distributed random number with zero mean and a variance of unity for each value of k\mathbf{k} and each direction jj, k0k_0 is the peak wavenumber of the initial condition, and M\mathbf{M} is a matrix that consists of a superposition of a vortical and an irrotational contribution (Brandenburg & Scannapieco [7]):

Mij(k)=(1−ζ)(δij−k^ik^j+σik^kϵijk)+ζk^ik^j,(8)M_{ij}(\mathbf{k}) = (1-\zeta)(\delta_{ij}-\hat{k}_i\hat{k}_j+\sigma\mathrm{i}\hat{k}_k\epsilon_{ijk})+\zeta\hat{k}_i\hat{k}_j, \tag*{(8)}

where 0≤ζ≤10 \leq\zeta\leq1 quantifies the irrotational fraction and 0≤σ≤10 \leq\sigma\leq1 the helicity fraction. The extreme cases ζ=0\zeta= 0 and ζ=1\zeta= 1 correspond to vortical and irrotational flows, respectively, while σ=0\sigma= 0 and σ=1\sigma= 1 correspond to nonhelical and helical fields, respectively. The shell-integrated kinetic energy spectrum, EK(k)E_{\mathrm{K}}(k), which is normalized such that ∫EK(k) dk=ρ0⟨u2/2⟩\int E_{\mathrm{K}}(k)\,\mathrm{d}k = \rho_0\langle\mathbf{u}^2/2\rangle, is initially ∝k4\propto k^4 for k<k0k < k_0 and ∝k−5/3\propto k^{-5/3} for k>k0k > k_0. The magnetic energy spectrum EM(k)E_{\mathrm{M}}(k) is normalized such that ∫EM(k) dk=⟨B2/2μ0⟩\int E_{\mathrm{M}}(k)\,\mathrm{d}k = \langle\mathbf{B}^2/2\mu_0\rangle and initially of the same shape as EK(k)E_{\mathrm{K}}(k). We also compute the vortical energy spectrum EV(k)E_{\mathrm{V}}(k), which is normalized such that ∫k2EV(k) dk=ρ0⟨ω2/2⟩\int k^2 E_{\mathrm{V}}(k)\,\mathrm{d}k = \rho_0\langle\boldsymbol{\omega}^2/2\rangle, where ω=∇×u\boldsymbol{\omega} = \nabla\times\mathbf{u} is the vorticity.

It is often convenient to express our results not in code units, where cs=k1=ρ0=1c_{\mathrm{s}} = k_1 = \rho_0 = 1, but in units of u0u_0 and k0k_0. Here, u0≡⟨u2⟩1/2u_0 \equiv\langle u^2\rangle^{1/2} is the initial rms velocity. We also define a nondimensional magnetic field as

Bi≡Bi/(μ0ρ0u02)1/2,(9)B_i \equiv B_i/(\mu_0\rho_0u_0^2)^{1/2}, \tag*{(9)}

where i=x,y,zi = x,y,z refers to the three components, and i=rmsi = \mathrm{rms} or i=inii = \mathrm{ini} refer to the rms values of the magnetic field at the actual or the initial time, respectively. We also define the Mach and magnetic Reynolds numbers based on the initial velocity, Ma0=u0/cs\mathrm{Ma}_0 = u_0/c_{\mathrm{s}} and ReM=u0/ηk0\mathrm{Re}_{\mathrm{M}} = u_0/\eta k_0, respectively. The Mach number at the actual time is denoted by Ma\mathrm{Ma}. As a nondimensional measure of ss, we define S=s/u0k0S = s/u_0k_0. When S<1S < 1 (S>1S > 1), the collapse is slower (faster) than the turnover rate of the turbulence.

In the following, we vary the input parameters ss, ζ\zeta, k0/k1k_0/k_1, Ma0\mathrm{Ma}_0, ReM\mathrm{Re}_{\mathrm{M}}, and BiniB_{\mathrm{ini}}. In all cases presented below, the magnetic Prandtl number is unity, i.e., ν/η=1\nu/\eta= 1.

In the following, we display the conformal time in units of the initial turnover time, (u0k0)−1(u_0k_0)^{-1}, where u0u_0 is the initial rms velocity. As in Brandenburg & Ntormousi [5], we monitor the vortical and irrotational contributions to the turbulence, ωrms=⟨ω2⟩1/2\omega_{\mathrm{rms}} = \langle\omega^2\rangle^{1/2} and (∇⋅u)rms=⟨(∇⋅u)2⟩1/2(\nabla\cdot\mathbf{u})_{\mathrm{rms}} = \langle(\nabla\cdot\mathbf{u})^2\rangle^{1/2}, in terms of quantities that have the dimension of a wavenumber,

k∇⋅u=(∇⋅u)rms/urms,(10)k_{\nabla\cdot\mathbf{u}} = (\nabla\cdot\mathbf{u})_{\mathrm{rms}}/u_{\mathrm{rms}}, \tag*{(10)}
kω=ωrms/urms.(11)k_{\omega} = \omega_{\mathrm{rms}}/u_{\mathrm{rms}}. \tag*{(11)}

These two values are expected to scale with k0k_0, which is why we usually present the ratios k∇⋅u/k0k_{\nabla\cdot\mathbf{u}}/k_0 and kω/k0k_{\omega}/k_0.

We use for all simulations the PENCIL CODE (Pencil Code Collaboration et al. [33]). Except for Run 39, where the resolution is 204832048^3 mesh points, it is either 5123512^3 or 102431024^3, as indicated in Table 1, where we summarize all runs discussed in this paper. As discussed later in § 3.3, kω/k0k_{\omega}/k_0 starts off with a small, but finite value, decreases rapidly at first, and may later display a continuous growth until a maximum (kω/k0)max⁡(k_{\omega}/k_0)_{\max} is reached. When a maximum is reached, we denote the total growth in ee-folds from minimum to maximum by Δln⁡(kω/k0)\Delta\ln(k_{\omega}/k_0), which is analogous to the growth in ee-folds of the magnetic field, which we denote by Δln⁡B\Delta\ln\mathcal{B}.

Table 1. Summary of the runs discussed in this paper. Here we list the nondimensional parameter SS; the physical values in code units are s/csk1=0.2s/c_{\mathrm{sk}1}=0.2, 1, 5, 20, and 100 both for the helical and nonhelical runs, 1–7 and 8–14, respectively. Column 7 gives ReM\mathrm{Re}_{\mathrm{M}} (Re\mathrm{Re}) for magnetic (nonmagnetic) runs. Dashes in columns 8–10 indicate the 8 nonmagnetic runs. For magnetic runs, dashes in columns 9 and 10 indicate decay. Run 39 corresponds to Run B of Brandenburg & Ntormousi [5] and is discussed in § 4.

RunSSσ\sigmaζ\zetak0/k1k_0/k_1Ma0\mathrm{Ma}_0ReM\mathrm{Re}_{\mathrm{M}} (Re\mathrm{Re})BiniB_{\mathrm{ini}}Δln⁡B\Delta\ln Bλ/u0k0\lambda/u_0k_0Δln⁡(kω/k0)\Delta\ln(k_\omega/k_0)(kω/k0)max⁡(k_\omega/k_0)_{\max}resol.
10.110100.1818402.3×10−82.3 \times10^{-8}8.330.520.397.095123512^3
20.110100.1818402.3×10−52.3 \times10^{-5}6.620.520.397.095123512^3
30.110100.1818402.3×10−22.3 \times10^{-2}1.881.000.316.465123512^3
40.610100.1818402.3×10−22.3 \times10^{-2}2.211.030.225.935123512^3
52.810100.1818402.3×10−22.3 \times10^{-2}3.561.030.306.435123512^3
61110100.1818402.3×10−22.3 \times10^{-2}4.771.030.366.825123512^3
75610100.1818402.3×10−22.3 \times10^{-2}5.961.030.397.045123512^3
80.200100.1313003.3×10−83.3 \times10^{-8}4.270.370.336.975123512^3
90.200100.1313003.3×10−53.3 \times10^{-5}4.220.370.336.975123512^3
100.200100.1313003.3×10−23.3 \times10^{-2}1.490.970.145.705123512^3
110.800100.1313003.3×10−23.3 \times10^{-2}1.920.970.175.915123512^3
123.800100.1313003.3×10−23.3 \times10^{-2}3.030.980.296.665123512^3
131500100.1313003.3×10−23.3 \times10^{-2}3.750.980.336.925123512^3
147700100.1313003.3×10−23.3 \times10^{-2}4.120.980.336.975123512^3
150.200.10100.1211703.6×10−23.6 \times10^{-2}1.410.340.115.505123512^3
160.200.50100.088005.4×10−25.4 \times10^{-2}1.040.250.004.005123512^3
170.200.90100.088405.1×10−25.1 \times10^{-2}0.310.040.250.945123512^3
180.200.95100.098804.9×10−24.9 \times10^{-2}0.050.0030.280.475123512^3
190.200.96100.098804.8×10−24.8 \times10^{-2}0.020.0010.260.385123512^3
200.200.97100.098904.8×10−24.8 \times10^{-2}——0.210.295123512^3
210.200.98100.099004.7×10−24.7 \times10^{-2}——0.130.205123512^3
220.200.99100.099104.7×10−24.7 \times10^{-2}——0.200.165123512^3
230.201100.099204.6×10−24.6 \times10^{-2}——0.300.145123512^3
240.101200.09920———0.010.07102431024^3
250.201100.09930———0.030.05102431024^3
260.40150.09940———0.380.04102431024^3
271.00120.10950———1.270.03102431024^3
280.500.95100.04220———0.090.235123512^3
290.100.95100.18890———0.310.71102431024^3
300.100.95100.271330———0.431.00102431024^3
310.100.95100.361780———0.511.31102431024^3
320.200.96100.099004.9×10−24.9 \times10^{-2}0.020.0010.170.38102431024^3
330.200.96100.0918004.9×10−24.9 \times10^{-2}0.120.0040.280.53102431024^3
340.200.96100.0945004.9×10−24.9 \times10^{-2}0.510.0080.530.79102431024^3
350.201100.0918709.4×10−39.4 \times10^{-3}——0.030.07102431024^3
360.201100.0918702.4×10−22.4 \times10^{-2}——0.170.09102431024^3
370.201100.0918704.7×10−24.7 \times10^{-2}——0.340.21102431024^3
380.201100.0918709.4×10−29.4 \times10^{-2}——0.250.48102431024^3
390.410100.191902.3×10−172.3 \times10^{-17}8.320.420.014.29204832048^3

Table 1.

While higher resolution leads to more accurate results, the lower resolution computations produce qualitatively similar ones; compare, for example, Runs 19 and 32, which have the same parameters. Both runs have almost the same vorticity and magnetic field evolution, but the lower resolution run has a slightly deeper minimum of kω/k0k_\omega/k_0, which results in a larger value of Δln⁡(kω/k0)\Delta\ln(k_\omega/k_0).

Results

Growth versus physical and conformal time

We have performed runs with different values of S\mathcal{S} using either helical (σ=1\sigma=1) or nonhelical (σ=0\sigma=0) turbulence, sometimes without irrotational contributions (ζ=0\zeta=0). Figure 1 shows that the larger the value of S\mathcal{S}, the larger the final magnetic field strength. This is because the effective Lorentz force in Equation (5), aJ×B\boldsymbol{a}\mathbf{J}\times\mathbf{B}, diminishes more rapidly with time when S\mathcal{S} is larger, allowing the magnetic field to continue growing further. In supercomoving coordinates, the initial growth rate of the magnetic field is not affected by the value of S\mathcal{S}. However, the growth rate is larger with than without kinetic helicity. On the other hand, at later times, when the magnetic field decays, the values are similar regardless of the presence of kinetic helicity.

Figure 1. Evolution of the rms magnetic field in comoving coordinates for s/csk1=0.2s/c_{sk1}=0.2 (black lines), 1 (blue lines), 5 (green lines), 20 (orange lines), and 100 (red lines). Solid (dashed) lines refer to cases with (without) initial kinetic helicity and have values of u0u_0 that are slightly larger (smaller), so S\mathcal{S} is in the range 0.1–56 (0.2–77); see Table 1. Runs 3–7 and Runs 10–14.

In physical time, the magnetic field shows a steep increase just toward the end of the collapse; see Figure 2. Interestingly, the runs with large values of S\mathcal{S}, which produce the strongest comoving magnetic fields, now yield the weakest physical fields when comparing the runs at the same fractional collapse time. This is because for the runs with large values of S\mathcal{S}, the freefall time is short, so

Figure 2. Same as Figure 1, but in physical units. Time is here normalized by the freefall time. The black and blue dots on the black and blue curves denote the time until which the growth in Figure 1 was still approximately exponential. The inset shows the same, but now time is normalized by the initial turnover time. Runs 3–7 and Runs 10–14.

the fractional times are larger, which effectively interchanges the order of the curves. This is demonstrated in the inset of Figure 2, where we show the same data, but now with time in units of the initial turnover time. In Figure 2, we have also indicated the times where the initial exponential growth of the comoving magnetic field with conformal time terminates. For S=0.1\mathcal{S}=0.1 and 0.6, Brms/a2B_{\rm rms}/a^2 has hardly increased by an order of magnitude. In particular, the growth of Brms/a2B_{\rm rms}/a^2 versus physical time is not superexponential, as found by Irshad P et al. (2025). The reason for our subexponential growth for S≪1\mathcal{S}\ll1 is that the rms velocity decreases significantly due to turbulent diffusion, leading to a smaller growth rate, which then counters the effect of collapse. Only for larger values of S\mathcal{S} is the growth superexponential in physical coordinates, and exponential in comoving coordinates. For S≥2.8\mathcal{S}\geq2.8, the times when exponential growth in comoving coordinates terminates are outside the plot range of Figure 2.

Given that the only effect of the collapse is on the Lorentz force, it is clear that the kinematic phase is completely independent of the collapse. In the runs with a smaller initial field, the kinematic growth phases can last longer before the turbulence has decayed too much, while for a stronger initial field, nonlinear effects terminate the exponential growth phase earlier. This is shown quantitatively in Figure 3, where we see the magnetic field growth for different initial field strengths. For weak initial fields, the comoving magnetic field grows by more than three orders of magnitude. It could grow more strongly if the magnetic Reynolds number were larger. The growth is only limited by the competition between magnetic field amplification by the flow and the simultaneous decay of the flow. Similar results were already reported in Brandenburg et al. [4], but without collapse dynamics (a=1a = 1).

Figure 3. Same as Figure 1, but for 3 different initial field strengths. Runs 1–3 and Runs 8–10.

Effect of the Lorentz force

As we have seen from Figure 3, when the initial magnetic field strength is large, the early exponential growth diminishes more rapidly. This is the result of the effective Lorentz force in Equation (5) becoming comparable with the inertial term, which implies [Irshad P et al. 2025]

a1/2Brms≲urmsμ0ρ0.(12)a^{1/2}B_{\rm rms} \lesssim u_{\rm rms}\sqrt{\mu_0\rho_0}. \tag*{(12)}

This is demonstrated in Figure 4(a), where we compare the evolution of a1/2Brmsa^{1/2}B_{\rm rms} with that of urms/u0u_{\rm rms}/u_0 for the same runs as those of Figure 1 and Figure 2.

Figure 4. (a) Similar to Figure 1, but now a1/2Brmsa^{1/2}B_{\rm rms} (thicker lines) and the instantaneous rms velocity (thinner lines) are plotted. The order of the colors is the same as before, with black being for s/csk1=0.2s/c_s k_1 = 0.2 and red for s/csk1=100s/c_s k_1 = 100 and solid (dashed) lines refer to helical (nonhelical) initial flows, for which SS varies in the range 0.1–56 (0.2–77). (b) Evolution separately for a1/2a^{1/2} (dashed–dotted lines) and BrmsB_{\rm rms} (solid lines), again with the same colors as before. Runs 3–7 and Runs 10–14.

We see that Equation (12) is well obeyed for all runs. The largest values of a1/2Brmsa^{1/2}B_{\rm rms} are obtained for the runs with small values of SS. The effect of kinetic helicity here is surprisingly weak, and the values of a1/2Brmsa^{1/2}B_{\rm rms} are only slightly smaller for the nonhelical runs than for the helical ones. For larger values of SS, on the other hand, the differences between helical and nonhelical runs are much larger and we see that the decay of a1/2a^{1/2} is well overcompensated by the growth of BrmsB_{\rm rms} so that the product a1/2Brmsa^{1/2}B_{\rm rms} still shows a strong increase later in the evolution; see Figure 4(b), where we plot separately the evolutions of a1/2a^{1/2} and BrmsB_{\rm rms}.

We also see that for large values of SS (short freefall times), a1/2Brmsa^{1/2}B_{\rm rms} decays at early times and only shows growth after that. This is opposite to the case of small values of SS and simply because at early times, a1/2a^{1/2} decays faster than the exponential growth of BrmsB_{\rm rms}. Only somewhat later, for 2≲tu0k0≲102 \lesssim t u_0 k_0 \lesssim10, exponential growth prevails.

Critical vorticity

Numerical simulations have demonstrated in the past that vorticity is an important ingredient of dynamos ([17, 13]). Achikanath Chirakkara et al. [1] did report dynamo action for purely irrotational driving, but this could perhaps still be explained by some residual vorticity in their simulations.

The apparent necessity of vorticity may be a limitation of current simulations, whose maximum magnetic Reynolds number may still not be large enough, because theoretically, small-scale dynamo action should also be possible for irrotational turbulence ([24, 27]). Clarifying this question for collapse simulations with the effective gain in resolution due to the use of supercomoving coordinates is crucial. We can study this here in more detail by varying the value of ζ\zeta. In Figure 5 we plot the evolution of k⋅∇⋅u/k0k \cdot\nabla\cdot u/k_0 and BrmsB_{\rm rms} for runs with ReM=900\mathrm{Re}_{\rm M} = 900 and several values of ζ\zeta. It is only when ζ\zeta is very close to unity that dynamo action ceases. This suggests that very small amounts of vorticity can suffice for successful dynamo action. The intervals displaying a steady increase of k∇⋅u/k0k_{\nabla\cdot u}/k_0, which were also seen in the work of Brandenburg & Ntormousi [5], are just a consequence of the more rapid decay of urmsu_{\mathrm{rms}} compared to (∇⋅u)rms(\nabla\cdot u)_{\mathrm{rms}}. At early times, urmsu_{\mathrm{rms}} is approximately constant while (∇⋅u)rms(\nabla\cdot u)_{\mathrm{rms}} shows an approximate power law decrease. This explains the initial decrease of k∇⋅u/k0k_{\nabla\cdot u}/k_0.

Figure 5. Evolution of k∇⋅u/k0k_{\nabla\cdot u}/k_0 (upper panel) and BrmsB_{\mathrm{rms}} (lower panel) for ζ=0.1\zeta= 0.1 (red), 0.5 (orange), 0.9 (green), 0.95 (blue), and 1 (black). Runs 15–18 and Run 23.

In Figure 6 we focus on several more values of ζ\zeta close to unity and find that for ReM=880\mathrm{Re}_{\mathrm{M}} = 880, the critical value is around 0.96. For larger values of ζ\zeta, there is no growth; see Runs 20–23 and Runs 35–38. However, the critical value of 1−ζ1-\zeta decreases with increasing magnetic Reynolds number. For larger values of ReM\mathrm{Re}_{\mathrm{M}}, smaller amounts of vorticity suffice for dynamo action. This is shown in Figure 7, where we compare runs for ζ=0.96\zeta= 0.96 with different values of ReM=900\mathrm{Re}_{\mathrm{M}} = 900, 1800, and 4500, using 102431024^3 mesh points. This value of ζ\zeta led to a vorticity that was the marginal value for obtaining growing magnetic fields for ReM=900\mathrm{Re}_{\mathrm{M}} = 900. We see that, as we increase ReM\mathrm{Re}_{\mathrm{M}}, the episode of growth becomes longer and the maximum magnetic field larger.

Figure 6. kω/k0k_{\omega}/k_0 (upper panel) and BrmsB_{\mathrm{rms}} (lower panel) for 1 (dotted black), 0.99 (solid black), 0.98 (blue), 0.97 (green), 0.96 (orange), and ζ=0.95\zeta= 0.95 (red). Runs 18–23.

Figure 7. kω/k0k_{\omega}/k_0 (upper panel) and BrmsB_{\mathrm{rms}} (lower panel) for ReM=900\mathrm{Re}_{\mathrm{M}} = 900 (black), 1800 (blue), and 4400 (green). The frequency of the oscillations is ω≈15\omega\approx15. The resolution is in all cases 102431024^3 mesh points. Runs 32–34.

To assess the level of vorticity, it is of interest to define a Reynolds number based on the vorticity as (Haugen et al. [17]; Elias-López et al. [11] (2024))

Reω=ωrmsνk02,(13)\mathrm{Re}_{\omega} = \frac{\omega_{\mathrm{rms}}}{\nu k_0^2}, \tag*{(13)}

and compute the critical value above which dynamo action occurs. Looking at Table 1, we see that the thresh-

old of ζ\zeta between 0.96 and 0.97 corresponds to kω/k0=0.38k_{\omega}/k_0 = 0.38 and 0.29, respectively. With ReM≈900\mathrm{Re}_{\mathrm{M}} \approx900, the critical value is PrMReω=(kω/k0)ReM≈300\mathrm{Pr}_{\mathrm{M}} \mathrm{Re}_{\omega} = (k_{\omega}/k_0)\mathrm{Re}_{\mathrm{M}} \approx300. This value is rather large, but it is unclear whether the dynamo onset is indeed determined predominantly by Reω\mathrm{Re}_{\omega}. If dynamos do indeed work for purely acoustic turbulence (ζ=1\zeta= 1), as found by Achikanath Chirakkara et al. [1], the dynamo onset could not depend on Reω\mathrm{Re}_\omega alone. Thus, future work should establish to what extent our critical value of PrMReω\mathrm{Pr}_{\mathrm{M}}\mathrm{Re}_\omega of 300 is universal.

Effect of scale separation

We have seen from Figure 6 that for very small values of 1−ζ1-\zeta, the expected approach of kωk_\omega to zero slows down in the sense that the values are almost the same for ζ=1\zeta=1 and ζ=0.99\zeta=0.99, and that for ζ=0.98\zeta=0.98 is further away. It is conceivable that the finite value of kωk_\omega for ζ=1\zeta=1 is caused by nonrepresentative averages resulting from a small number of turbulent eddies, i.e., from small scale separation, which is the ratio between k0k_0 and the lowest wavenumber of the domain. To check whether this is the case, we present in Figure 8 runs with different values of k0k_0. As expected, we see that kωk_\omega scales with k0k_0, so the ratio kω/k0k_\omega/k_0 varies only little and lies in the range 0.01≤kω/k0≤0.020.01 \leq k_\omega/k_0 \leq0.02 after about 10–30 turnover times. This suggests that this value of kω/k0k_\omega/k_0 is not affected by the finite scale separation. When we decrease the scale separation ratio to k0/k1=2k_0/k_1=2, the run shows vigorous fluctuations. They may indicate that the numerical resolution becomes insufficient in the collapsing regions. The above simulations have demonstrated once again that without the gain of effective resolution due to the use of supercomoving coordinates, earlier collapse simulations may have been severely underresolved.

Figure 8. kω/k0k_\omega/k_0 for hydrodynamic runs with ζ=1\zeta=1, ReM=900\mathrm{Re}_{\mathrm{M}}=900, and different values of k0k_0. Runs 24–27.

Growth of vorticity

In Figure 6, we have seen that for ζ=0.95\zeta=0.95, there can be growth of kωk_\omega by a certain amount. It is possible that this is caused either by magnetic driving [22] or by what is known as magnetically assisted vorticity production [7]. To clarify this, it is useful to compare with the purely hydrodynamic case; see Table 1.

For an isothermal gas, there is no baroclinic term, which would be the main agent for producing vorticity in nonisothermal flows. There is also no rotation or shear, both of which could lead to vorticity generation [10, 11] (Elias-López et al. 2024). There remain only three possibilities for driving or amplifying vorticity: (i) through viscosity via gradients of the velocity divergence being inclined against density gradients, (ii) through magnetic driving or magnetically assisted vorticity production [7], and (iii) through nonlinearity.

The growth of vorticity through nonlinearity may be motivated by the formal analogy with the induction equation when the magnetic field is replaced by the vorticity ω\boldsymbol{\omega}, i.e.,

∂ω∂t=∇×(u×ω)+ω˙visc+ω˙mag.(14)\frac{\partial\boldsymbol{\omega}}{\partial t}=\nabla\times(\boldsymbol{u}\times\boldsymbol{\omega})+\dot{\boldsymbol{\omega}}_{\mathrm{visc}}+\dot{\boldsymbol{\omega}}_{\mathrm{mag}}. \tag*{(14)}

where ω˙visc=ν(∇2ω+∇×G)\dot{\boldsymbol{\omega}}_{\mathrm{visc}}=\nu(\nabla^2\boldsymbol{\omega}+\nabla\times\boldsymbol{G}) is the curl of the viscous acceleration with Gi=2SijVjln⁡ρG_i=2S_{ij}V_j\ln\rho being a vector characterizing the driving of vorticity even if it was vanishing initially [28, 7], and ω˙mag=a(t)∇×(J×B/ρ)\dot{\boldsymbol{\omega}}_{\mathrm{mag}}=a(t)\nabla\times(\boldsymbol{J}\times\boldsymbol{B}/\rho) is the vorticity driving from the curl of the Lorentz force, where we have included the a(t)a(t) term resulting from the use of supercomoving coordinates.

The analogy between induction and vorticity equations is obviously imperfect, because the velocity is directly related to the vorticity. This analogy has been invoked by Batchelor [2] to explain dynamo action, but here we rather use it to motivate the question whether vorticity can be amplified.

To distinguish between the various possibilities, we must vary the viscosity, the Mach number, and the initial magnetic field strength. One important clue is given by the fact that the occurrence of vorticity depends on the Mach number of the turbulence. This is demonstrated in Figure 9, where we plot the evolution of kω/k0k_\omega/k_0 for different Mach numbers. Figure 10 shows that (kω/k0)max⁡(k_\omega/k_0)_{\max} scales with the actual Mach number Ma at the time when (kω/k0)max⁡(k_\omega/k_0)_{\max} is reached and the initial Mach number Ma0\mathrm{Ma}_0, respectively. The slopes for both scalings are different, and somewhat shallower than the nearly quadratic scaling found by Federrath et al. [13] for the forced case.

Evolution of $k_\omega/k_0$ for different Mach numbers

Figure 9. Evolution of kω/k0k_\omega/k_0 for different Mach numbers. Runs 28–31.

Figure 10. Scaling of (kω/k0)max⁡(k_\omega/k_0)_{\max} with the actual and initial Mach numbers, Ma and Ma0\mathrm{Ma}_0, respectively. The slopes are 1.6 and 0.84, respectively. Runs 28–31.

In all our runs, kω/k0k_\omega/k_0 reaches a maximum at some point. For runs 15–18, we see that (kω/k0)max⁡(k_\omega/k_0)_{\max} increases with increasing values of Bini\mathcal{B}_{\mathrm{ini}}; see Figure 11. Figure 12 shows that this increase is linear and not quadratic, which means that the vorticity is magnetically driven rather than due to magnetically assisted growth; see Brandenburg & Scannapieco [7] for details on this distinction. As seen from Table 1, the magnetic field decays for these runs, so there is no dynamo action. Due to the presence of the a(t)a(t) factor in ω˙mag\dot{\omega}_{\mathrm{mag}}, we expect the magnetic effect to diminish in collapse simulations with a small value of SS.

Figure 11. kω/k0k_\omega/k_0 for hydromagnetic runs with ζ=1\zeta= 1, ReM=1900\mathrm{Re}_{\mathrm{M}} = 1900, and different magnetic field strengths. Runs 35–38.

Figure 12. Dependence of the maximum of kω/k0k_\omega/k_0 on Bini\mathcal{B}_{\mathrm{ini}} for hydromagnetic runs with ζ=1\zeta= 1, ReM=900\mathrm{Re}_{\mathrm{M}} = 900, and different magnetic field strengths. The straight line indicates a linear relationship. Runs 35–38.

Spectral evolution

In Figure 13, we show the evolution of EK(k,t)E_{\mathrm{K}}(k,t), EV(k,t)E_{\mathrm{V}}(k,t), and EM(k,t)E_{\mathrm{M}}(k,t) for Run 34. This is our run with the largest magnetic Reynolds number (ReM=4500\mathrm{Re}_{\mathrm{M}} = 4500) and has only 4% vorticity (ζ=0.96\zeta= 0.96), but shows clear dynamo action. The evolution of kω/k0k_\omega/k_0 and BrmsB_{\mathrm{rms}} was shown in Figure 7.

Figure 13. Evolution of EK(k,t)E_K(k,t), EV(k,t)E_V(k,t), and EM(k,t)E_M(k,t) for Run 34. The arrows indicate the sense of time. The first time is shown as dotted lines to distinguish it better from the next one, for which EM(k)E_M(k) is still very similar.

We see that both EK(k,t)E_{\mathrm{K}}(k,t) and EV(k,t)E_{\mathrm{V}}(k,t) decay, while EM(k,t)E_{\mathrm{M}}(k,t) increases both at large and small wavenumbers. Overall, EV(k)E_{\mathrm{V}}(k) is almost a hundred times smaller than EK(k,t)E_{\mathrm{K}}(k,t), but, similarly to EM(k,t)E_{\mathrm{M}}(k,t), EV(k)E_{\mathrm{V}}(k) also shows a small temporal increase at small values of kk. This is suggestive of magnetic vorticity production via an inverse cascade. Also, although EV(k,t)E_{\mathrm{V}}(k,t) decays in the inertial range, it bulges at k/k0≈4k/k_0 \approx4, which appears to be a direct consequence of magnetic driving.

As already demonstrated in Brandenburg & Ntormousi [5], the collapse dynamics do not affect the magnetic energy spectra significantly. At length scales above the Jeans length, the collapse does lead to a growth of the compressive part of the kinetic energy spectra and even a growth of magnetic energy, but this is associated with the compression itself and is not a consequence of a dynamo; see Figure 9(b) of Brandenburg & Ntormousi [5].

Instantaneous growth rate

For the magnetic energy to grow, the induction term u×B\boldsymbol{u} \times\boldsymbol{B} in Equation (4) has to overcome the dissipation term. This is also true in the unsteady case and can therefore be used to characterize dynamo action in a collapse simulation. In the evolution equation for the mean magnetic energy density, EM(t)≡⟨B2/2μ0⟩\mathcal{E}_{\mathrm{M}}(t) \equiv\langle B^2/2\mu_0\rangle, the term

⟨J⋅(u×B)⟩=−WL(15)\langle\boldsymbol{J} \cdot(\boldsymbol{u} \times\boldsymbol{B}) \rangle= -W_{\mathrm{L}} \tag*{(15)}

has to exceed the Joule dissipation, QM=⟨μ0ηJ2⟩Q_{\mathrm{M}} = \langle\mu_0\eta J^2\rangle. The instantaneous growth rate of magnetic energy can then be written as γ=(−WL−QM)/EM\gamma=(-W_L-Q_M)/\mathcal{E}_M. The first term, which can also be written as WL=⟨u⋅(J×B)⟩W_L=\langle\mathbf{u}\cdot(\mathbf{J}\times\mathbf{B})\rangle, is the work done by the Lorentz force. When it is negative, kinetic energy is used to drive magnetic energy; see Equation (15).

Brandenburg & Ntormousi [5] made use of the fact that in two dimensions (2D), when no action is possible, Equation (4) can be written as an advection–diffusion equation, i.e., DA/Dt=η∇2AD A/Dt=\eta\nabla^2 A, where AA is the component of A\mathbf{A} that is normal to the 2D plane. This motivated them to decompose WLW_L by expanding B=∇×A\mathbf{B}=\nabla\times\mathbf{A} to get

−⟨J⋅(u×B)⟩=⟨Jiuj(Ai,j−Aj,i)⟩=WL2D+WL3D.(16)-\langle\mathbf{J}\cdot(\mathbf{u}\times\mathbf{B})\rangle=\langle J_i u_j(A_{i,j}-A_{j,i})\rangle=W_L^{2D}+W_L^{3D}. \tag*{(16)}

Here, the first term is related to the advection term. The second term, WL3D=−⟨JiujAj,i⟩W_L^{3D}=-\langle J_i u_j A_{j,i}\rangle, vanishes in 2D. Thus, they identified WL3DW_L^{3D} with a contribution that characterizes the 3D nature of the system and used it as a proxy for dynamo action when it is large enough. They thus defined

γ2D=−(WL2D+QM)/EM,γ3D=−WL3D/EM,(17)\gamma_{2D}=-(W_L^{2D}+Q_M)/\mathcal{E}_M,\qquad\gamma_{3D}=-W_L^{3D}/\mathcal{E}_M, \tag*{(17)}

so that γ2D+γ3D=γ\gamma_{2D}+\gamma_{3D}=\gamma.

In Figure 14, we plot the time dependences of γ\gamma, γ2D\gamma_{2D}, and γ3D=γ−γ2D\gamma_{3D}=\gamma-\gamma_{2D} for Runs 23 (no dynamo, because kωk_\omega is too small), 32 (weak dynamo), and 34 (strong dynamo, ReM\mathrm{Re}_M is the largest). We see that γ2D\gamma_{2D} is always negative, except during an early phase for Run 34, which can be associated with strong 2D tangling of the initial magnetic field. When γ3D\gamma_{3D} is added to γ2D\gamma_{2D}, the resulting instantaneous growth rate is positive during the early part of the evolution of Run 32 and during the entire evolution of Run 34.

Figure 14. Evolution of the pseudo growth rate γ\gamma (black lines), with contributions from γ2D\gamma_{2D} (blue lines) and the residual γ−γ2D\gamma-\gamma_{2D} (red lines), for Runs 23 (a), 32 (b), and 34 (c).

Our considerations above have shown that the use of γ2D\gamma_{2D} and γ3D\gamma_{3D} does indeed provide a meaningful tool to assess dynamo action in unsteady environments in general, and in collapse simulations in particular. Nevertheless, we regard the direct demonstration of exponential growth in supercomoving coordinates in § 3.1 as even more convincing evidence for dynamo action.

Visualizations

In Figure 15, we present visualizations of BzB_z, ωz/u0k0\omega_z/u_0 k_0, and ∇⋅u/u0k0\nabla\cdot u/u_0 k_0 for Run 37 at early and late times. There is no significance in our having chosen the zz component of BB and ω\omega; all three components are statistically equivalent.

Visualizations of $B_z$, $\omega_z/u_0 k_0$, and $\nabla \cdot u/u_0 k_0$ for Run 37 at early and late times

Figure 15. Visualizations of BzB_z, ωz/u0k0\omega_z/u_0 k_0, and ∇⋅u/u0k0\nabla\cdot u/u_0 k_0 for Run 37 at early and late times. Note that the domain is cubic, but the images have been stretched in the horizontal direction to take advantage of the full page size.

The magnetic field appears to preserve its initial length scale corresponding to k=k0k=k_{0}, and only the field strength becomes weaker with time. By contrast, the vorticity quickly develops small-scale patches that then grow to larger-scale patches at later times. Note also that the magnitude of ωz/u0k0\omega_{z}/u_{0}k_{0} (about 0.01) is comparable to that of BzB_{z}. This is reminiscent of the findings of Kahniashvili et al. [22], who reported a quantitative agreement between the spectra of vorticity and magnetic field.

For the velocity divergence, there is a much larger decrease from the time tu0k0=3tu_{0}k_{0}=3 to tu0k0=30tu_{0}k_{0}=30. As stated above, the compressive part of the velocity field, which is reflected in the values and the appearance of ∇⋅u\nabla\cdot\mathbf{u}, decreases more strongly with time than the vortical part, as reflected through the vorticity. We also see that, although the initial scales are rather small, they still seem to be sufficiently well resolved.

Comparison with previous work

In our earlier paper (Brandenburg & Ntormousi [5]), we simulated gravitational collapse using numerical simulations of decaying turbulence in a Jeans-unstable domain at a resolution of 204822048^{2} mesh points. We only found a weak increase in the magnetic field with time. Given the knowledge of the collapse time from the simulations, i.e., the time when the singularity was reached, we can replace the pressureless freefall time by the actual collapse time and express the evolution of the rms magnetic field in comoving coordinates. This allows us to see whether the growth in the old simulations is close to exponential in comoving coordinates during any time interval.

The result is shown in Figure 16, where we computed the conformal time and scale factor numerically based on Equation (1). Here we used the empirical value of tff≈2.016/csk1t_{\mathrm{ff}}\approx2.016/c_{\mathrm{s}}k_{1}, which yields s≈0.78 csk0s\approx0.78\,c_{\mathrm{s}}k_{0}, and thus, since u0/cs=0.19u_{0}/c_{\mathrm{s}}=0.19 and k0/k1=10k_{0}/k_{1}=10, we

Figure 16. Physical magnetic field BphB_{\mathrm{ph}} (dashed red lines) and its comoving counterpart a2Bpha^{2}B_{\mathrm{ph}} (black lines) versus physical time (a) and conformal time (b) for Run B from Brandenburg & Ntormousi [5] and Run 39 of the present paper.

have S≈0.4S\approx0.4; see Table 1, where it is called Run 39. The physical values of the magnetic field computed by Brandenburg & Ntormousi [5] are denoted by BphB_{\mathrm{ph}}. We also plot the comoving values a2Bpha^{2}B_{\mathrm{ph}} both versus physical and conformal time. Here, the a(t)a(t) and the conformal time have been computed from Equations (1) and (2). Although there is a steady increase of BrmsB_{\mathrm{rms}}, Figure 16(b) shows that the comoving magnetic field does not follow an exponential growth in conformal time, except for a very early time interval 0<tu0k0≲0.40<tu_{0}k_{0}\lesssim0.4.

To understand why the exponential phase is so short in this run, we compare its parameters with those of the other runs presented in this paper; see Table 1. The closest match is with Run 1. We see immediately that the main problem with Run 39 is the small value of the magnetic Reynolds number, which is 10 times smaller than that of Run 1. In spite of the high resolution of Run 39, the value of ReM\mathrm{Re}_{\mathrm{M}} could not have been chosen larger because of the strong compression and large gradients suffered by the collapsing regions toward the end of the run. This highlights the main advantage of choosing supercomoving coordinates for collapse simulations.

Conclusions

In this work we approached the problem of dynamo action during gravitational collapse by employing supercomoving coordinates. This is a significant change of paradigm with respect to previous simulation work (e.g., [42, 41, 14, 5]), which was limited by the shrinking dynamical range during the collapse; see § 4. In supercomoving coordinates, we can look for exponential growth of the magnetic field, which is a clear signature of a dynamo. This allows us to surpass the other obstacle faced by previous work, which is characterizing dynamos in unsteady flows.

When describing gravitational collapse in supercomoving coordinates, the governing equations of magnetohydrodynamics are similar to the original ones, except that now the scale factor appears in front of the Lorentz force. This reduces the effective Lorentz force, because a(t)a(t) becomes progressively smaller with time. Therefore, in the limit of very short collapse times or large values of ss, the evolution approaches essentially the kinematic evolution. This, however, does not mean unlimited continual growth, because the rms value of the turbulent intensity is declining.

As shown previously [4], decaying turbulence leads to an episode of exponential growth if the magnetic Reynolds number is large enough. The larger it is, the longer is the episode of exponential growth. This is essentially the result of a competition against the decay of turbulence, which lowers the instantaneous value of the magnetic Reynolds number as time goes on. The gravitational collapse changes this picture only little if we view the decay in supercomoving coordinates, because the collapse only affects the nonlinear dynamics, and this nonlinearity gets weaker with time.

Irshad P et al. (2025) considered forced turbulence, as opposed to our study of decaying turbulence. Therefore, in their models, the magnetic field could always be sustained, but the source of the driving remains unclear. The superexponential growth that they reported, however, was still recovered in our decay simulations, unless the freefall time is longer than the turnover time of the turbulence. In that case, the growth is actually subexponential, but this is primarily a consequence of the decay of the turbulence.

Our present work has also shown that even very small amounts of vorticity can be sufficient to facilitate dynamo action. In particular, we find that the vorticity can grow in concert with the magnetic field. However, the magnetic vorticity production will decline in simulations with small values of SS.

Earlier work on turbulent collapse and dynamo action has suggested that the collapse drives turbulence and enhances it ([41, 18] (Xu & Lazarian 2020)). Our work casts doubt on this interpretation due to two aspects. First, the collapse dynamics reduces the effective nonlinearity, resulting in stronger apparent field amplification by the turbulence, and second, there can be generation of vorticity both from viscosity and from the magnetic field itself, but this is not directly related to the collapse. It should therefore be checked whether these two factors could have contributed to the earlier findings of collapse-driven turbulence. In this context, the fact that we do not solve the Poisson equation for self-gravity but treat the collapse as a homogeneous flow through the change of coordinates could be a difference worth investigating.

As explained in Section 4, the transformation to supercomoving coordinates may also help analyze existing simulations in physical coordinates. We argue that for homogeneous collapse simulations that do not utilize supercomoving coordinates, it is still useful to express such results in terms of comoving quantities and conformal time, because they might display exponential magnetic field growth that would be perhaps the strongest indication of dynamo action so far.

Our work has applications not just to interstellar clouds and primordial star formation (e.g., [35, 20, 38]), but also to larger cosmological scales. Our results show that small amounts of vorticity might suffice to produce dynamo action even in decaying turbulence, which, we argue, is also relevant to gravitational collapse. This consideration is important for understanding magnetism in prot halos before the first stars form and their feedback drives sufficient turbulence for dynamo action (e.g., [34]).

Finally, our findings indicate that earlier simulations, including our own high-resolution simulations at 204832048^3 mesh points, may still have had insufficient resolution to follow the collapse and should be revisited using more idealized settings that allow the usage of a comoving frame.

We thank Fabio Del Sordo for helpful discussions on vorticity generation, Pallavi Bhat for suggesting an explanation for the subexponential growth for S≪1S \ll1, and the referee for a detailed assessment of our work. We also acknowledge inspiring discussions with the participants of the program on “Turbulence in Astrophysical Environments” at the Kavli Institute for Theoretical Physics in Santa Barbara. This research was supported in part by the Swedish Research Council (Vetenskapsrådet) under grant No. 2019-04234, the National Science Foundation under grants No. NSF PHY-2309135, AST-2307698, AST-2407698, AST-2408411, and NASA Award 80NSSC22K0825. E.N. acknowledges funding from the Italian Ministry for Universities and Research (MUR) through the “Young Researchers” funding call (Project MSCA 000074). We acknowledge the allocation of computing resources provided by the Swedish National Allocations Committee at the Center for Parallel Computers at the Royal Institute of Technology in Stockholm.

Software and Data Availability. The source code used for the simulations of this study, the Pencil Code ([33]), is freely available on https://github.com/pencil-code. The simulation setups and corresponding input and reduced output data are freely available on http://doi.org/10.5281/zenodo.15693287.

References

  1. [1]Achikanath Chirakkara, R., Federrath, C., Trivedi, P., & Banerjee, R. 2021, PhRvL, 126, 091103, doi: 10.1103/PhysRevLett.126.091103
  2. [2]Batchelor, G. K. 1950, RSPSA, 201, 405, doi: 10.1098/rspa.1950.0069DOI
  3. [3]Beck, R., Poedz, A. D., Shukurov, A., & Sokoloff, D. D. 1994, A&A, 289, 94
  4. [4]Brandenburg, A., Khniashvili, T., Mandal, S., et al. 2019, PhRvF, 4, 024608, doi: 10.1103/PhysRevFluids.4.024608DOI
  5. [5]Brandenburg, A., & Ntormousi, E. 2022, MNRAS, 513, 2136, doi: 10.1093/mnras/stac982DOI
  6. [6]Brandenburg, A. 2023, ARA&A, 61, 561, doi: 10.1146/annurev-astro-071221-052807DOI
  7. [7]Brandenburg, A., & Scannapieco, E. 2025, ApJ, 983, 105, doi: 10.3847/1538-4357/adbe38DOI
  8. [8]Chen, J., Lopez-Rodriguez, E., Ivison, R. J., et al. 2024, A&A, 692, A34, doi: 10.1051/0004-6361/202450969DOI
  9. [9]Cowling, T. G. 1933, MNRAS, 94, 39, doi: 10.1093/mnras/94.1.39DOI
  10. [10]Del Sordo, F., & Brandenburg, A. 2011, A&A, 528, A145, doi: 10.1051/0004-6361/201015661
  11. [11]Elias-López, A., Del Sordo, F., & Viganò, D. 2023, A&A, 677, A46, doi: 10.1051/0004-6361/202346696
  12. [13]Federrath, C., Chabrier, G., Schober, J., et al. 2011a, PhRvL, 107, 114504, doi: 10.1103/PhysRevLett.107.114504DOI
  13. [14]Federrath, C., Sur, S., Schleicher, D. R. G., Banerjee, R., & Klessen, R. S. 2011b, ApJ, 731, 62, doi: 10.1088/0004-637X/731/1/62DOI
  14. [15]Geach, J. E., Lopez-Rodriguez, E., Doherty, M. J., et al. 2023, NATUR, 621, 483, doi: 10.1038/s41586-023-06346-4DOI
  15. [16]Gilbert, A. D., Frisch, U., & Pouquet, A. 1988, GaPFD, 42, 151, doi: 10.1080/03091928808208861DOI
  16. [17]Haugen, N. E. L., Brandenburg, A., & Mee, A. J. 2004, MNRAS, 353, 947, doi: 10.1111/j.1365-2966.2004.08127.xDOI
  17. [18]Hennebelle, P. 2021, A&A, 655, A3, doi: 10.1051/0004-6361/202141650DOI
  18. [19]Hide, R., & Palmer, T. N. 1982, GApFD, 19, 301, doi: 10.1080/03091928208208961DOI
  19. [20]Hirano, S., & Machida, M. N. 2022, ApJL, 935, L16, doi: 10.3847/2041-8213/ac85e0DOI
  20. [22]Kahniashvili, T., Brandenburg, A., Campanelli, L., Ratra, B., & Tevzadze, A. G. 2012, PhRvD, 86, 103005, doi: 10.1103/PhysRevD.86.103005DOI
  21. [23]Kazantsev, A. P. 1968, JETP, 26, 1031
  22. [24]Kazantsev, A. P., Ruzmaikin, A. A., & Sokolov, D. D. 1985, ZhETF, 61, 285
  23. [25]Kulsrud, R. M., & Anderson, S. W. 1992, ApJ, 396, 606, doi: 10.1086/171743DOI
  24. [26]Martel, H., & Shapiro, P. R. 1998, MNRAS, 297, 467, doi: 10.1046/j.1365-8711.1998.01497.xDOI
  25. [27]Martins Afonso, M., Mitra, D., & Vincenzi, D. 2019, RSPSA, 475, 20180591, doi: 10.1098/rspa.2018.0591
  26. [28]Mee, A. J., & Brandenburg, A. 2006, MNRAS, 370, 415, doi: 10.1111/j.1365-2966.2006.10476.xDOI
  27. [29]Meneguzzi, M., Frisch, U., & Pouquet, A. 1981, PhRvL, 47, 1060, doi: 10.1103/PhysRevLett.47.1060DOI
  28. [30]Moffatt, H. K., & Proctor, M. R. E. 1985, JFM, 154, 493, doi: 10.1017/S002211208500163XDOI
  29. [31]Parker, E. N. 1955, ApJ, 122, 293, doi: 10.1086/146087 —. 1971, ApJ, 163, 255, doi: 10.1086/150765DOI
  30. [32]Pattle, K., Fissel, L., Tahani, M., Liu, T., & Ntormousi, E. 2023, in Astronomical Society of the Pacific Conference Series, Vol. 534, Protostars and Planets VII, ed. S. Inutsuka, Y. Aikawa, T. Muto, K. Tomida, & M. Tamura, 193, doi: 10.48550/arXiv.2203.11179
  31. [33]Pencil Code Collaboration, Brandenburg, A., Johansen, A., et al. 2021, JOSS, 6, 2807, doi: 10.21105/joss.02807
  32. [34]Schleicher, D. R. G., Banerjee, R., Sur, S., et al. 2010, A&A, 522, A115, doi: 10.1051/0004-6361/201015184DOI
  33. [35]Schleicher, D. R. G., Galli, D., Glover, S. C. O., et al. 2009, ApJ, 703, 1096, doi: 10.1088/0004-637X/703/1/1096DOI
  34. [36]Schober, J., Schleicher, D., Federrath, C., et al. 2012, ApJ, 754, 99, doi: 10.1088/0004-637X/754/2/99DOI
  35. [37]Shandarin, S. F. 1980, Astrophysics, 16, 439, doi: 10.1007/BF01005530DOI
  36. [38]Sharda, P., Federrath, C., & Krumholz, M. R. 2020, MNRAS, 497, 336, doi: 10.1093/mnras/staa1926DOI
  37. [39]Steenbeck, M., Krause, F., & Rädler, K. H. 1966, Zeitschrift Naturforschung Teil A, 21, 369, doi: 10.1515/zna-1966-0401DOI
  38. [40]Subramanian, K., & Brandenburg, A. 2014, MNRAS, 445, 2930, doi: 10.1093/mnras/stu1954DOI
  39. [41]Sur, S., Federrath, C., Schleicher, D. R. G., Banerjee, R., & Klessen, R. S. 2012, MNRAS, 423, 3148, doi: 10.1111/j.1365-2966.2012.21100.xDOI
  40. [42]Sur, S., Schleicher, D. R. G., Banerjee, R., Federrath, C., & Klessen, R. S. 2010, ApJL, 721, L134, doi: 10.1088/2041-8205/721/2/L134DOI
  41. [43]Vainshtein, S. I., & Ruzmaikin, A. A. 1971, AZh, 48, 902

Paper details

vlnc:W_2du8s55x
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 5

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents