betaFeedback

WorksPhysics and Astronomy

Light-facilitated ferroelectric switching in wurtzite crystals

Abstract

Wurtzite ferroelectrics combine large remanent polarization with full CMOS compatibility, positioning them as a leading platform for next-generation non-volatile memory. Their practical deployment, however, is hindered by an intrinsically large coercive field, rooted in the high energy barrier separating the polar wurtzite phase from the nonpolar hexagonal phase that mediates polarization switching. Here, using first-principles calculations, we propose an alternative, field-free strategy for lowering this barrier: above-bandgap electronic photoexcitation. Taking LaN as a representative wurtzite ferroelectric, we show that light induced carriers dramatically reduce the energy difference between the hexagonal intermediate phase and the wurtzite ground state, sharply reducing the energy barrier to ferroelectric switching. This effect originates from a photoinduced partial metallization of the polar phase, which screens the dipole-dipole interactions that stabilize ferroelectric order and thereby favors the competing nonpolar structure. The robustness of this mechanism is further confirmed for the rocksalt polymorph. Our results establish light as a powerful, non-invasive route to controlling ferroelectric switching in wurtzites, opening a path toward faster, lower-voltage, and more energy-efficient non-volatile memory technologies.

Wurtzites (WZ, space group P63mcP6_{3}mc) have rapidly evolved from a purely piezoelectric materials family into a genuinely new class of ferroelectrics. Archetypal WZ ferroelectrics, aluminum scandium nitride alloys (AlxSc1−xN\mathrm{Al}_{x}\mathrm{Sc}_{1-x}\mathrm{N}, ASN), exhibit switchable polarization of 0.8–1.7 C·m−2^{-2} and retain their ferroelectric performance up to temperatures of ∼1,100\sim1{,}100 °C.[1][2] Crucially, wurtzites combine this large remanent polarization with full compatibility with complementary metal-oxide-semiconductor (CMOS) technology and back-end-of-line integration,[3] positioning them as prime candidates for next-generation non-volatile memories and neuromorphic devices.

Over the past few years, significant progress has been made in overcoming the endurance and leakage bottlenecks that initially limited WZ-based devices. Whereas early ASN capacitors were restricted to roughly 10710^{7} switching cycles by coercive fields exceeding 3 MV cm−1^{-1}, controlled partial-polarization switching has recently pushed the write endurance beyond 101010^{10} cycles.[4] In parallel, ASN ferroelectric diode memories have been demonstrated at diameters below 50 nm,[5] and alloy engineering is now being exploited to further tune the coercive field and phase stability.[6] Together, these advances mark the transition of WZ ferroelectrics from a scientific curiosity into a viable platform for next-generation embedded non-volatile memory and in-memory computing.

Despite this promise, WZ ferroelectrics suffer from a key limitation: an intrinsically high coercive field, Ec\mathcal{E}_{c}. Polarization reversal in wurtzites requires the crystal to traverse a high-energy, nonpolar intermediate state associated with a transient hexagonal-layered phase (H, space group P63/mmcP6_{3}/mmc), in which the nitrogen sublattice adopts an energetically unfavourable coordination with neighbouring metal atoms.[7][8] This switching pathway yields an Ec\mathcal{E}_{c} approximately an order of magnitude higher than that of conventional oxide ferroelectrics. While a high Ec\mathcal{E}_{c} provides a large switching barrier that enhances data retention and suppresses unintended polarization reversal, it simultaneously imposes substantial operating-voltage requirements that complicate low-voltage CMOS integration. Reducing film thickness alone is not a viable workaround, since it compromises the achievable polarization. A central challenge in WZ ferroelectrics is therefore to identify effective strategies for lowering the energy barrier to polarization switching, thereby reducing Ec\mathcal{E}_{c}.

In this Letter, using first-principles calculations, we propose an original strategy for lowering the energy barrier to polarization switching in wurtzites: inducing above-bandgap electronic excitations with light. Taking LaN as a representative wurtzite material, we show that optical absorption considerably reduces the energy difference between the ground-state polar WZ and the transient nonpolar H phase, even stabilising the latter polymorph under sufficient light irradiation. This behaviour is rationalised in terms of partial metallization of the polar WZ crystal, which screens dipole-dipole interactions and thereby favours the nonpolar hexagonal phase. Assessing the impact of light absorption on other competing polymorphs, such as the nonpolar rocksalt phase (RS, cubic Fm3‾mFm\overline{3}m), further corroborates the robustness of the proposed ferroelectric-switching strategy.

First-principles calculations based on density functional theory (DFT) were carried out with the VASP code,[10, 11] using an energy cutoff of 500 eV, the projector augmented wave method,[12] and the generalized gradient approximation[13] for the exchange-correlation energy. We considered three candidate crystal structures: wurtzite (WZ, space group P63/mmcP6_3/mmc), rocksalt (RS, Fm3‾mFm\overline{3}m), and layered hexagonal (H, P63/mcP6_3/mc) with AA′ stacking (see Figure 1). The Brillouin zones of the WZ and H phases were sampled with an 8×8×68 \times8 \times6 k-point grid, while a 10×10×1010 \times10 \times10 grid was used for the RS phase. Van der Waals dispersion corrections, necessary to properly describe the H phase, were accounted for with the DFT-D3 method.[14] Optoelectronic properties were calculated with the range-separated hybrid HSEsol functional.[15] Electric polarizations were estimated with the Born effective charges method.[16, 17]

Figure 1. (a)–(d) The wurtzite (WZ) ground-state, (b)–(e) the layered hexagonal (H) saddle point of field-induced ferroelectric switching in WZ, and (c) the rocksalt (RS) structure. Large green and small gray spheres represent La and N atoms, respectively, and solid black lines represent primitive cells. The angle α\alpha can be used to track the transformation of the WZ into the H phase under illumination (αWZ=78.7∘\alpha_{\mathrm{WZ}} = 78.7^\circ and αH=90∘\alpha_{\mathrm{H}} = 90^\circ). (f) Double-well potential curve in which the H phase appears as a saddle point separating two WZ structures with opposed polarization.

Figure 1. (a)–(d) The wurtzite (WZ) ground-state, (b)–(e) the layered hexagonal (H) saddle point of field-induced ferroelectric switching in WZ, and (c) the rocksalt (RS) structure. Large green and small gray spheres represent La and N atoms, respectively, and solid black lines represent primitive cells. The angle α\alpha can be used to track the transformation of the WZ into the H phase under illumination (αWZ=78.7∘\alpha_{\mathrm{WZ}} = 78.7^\circ and αH=90∘\alpha_{\mathrm{H}} = 90^\circ). (f) Double-well potential curve in which the H phase appears as a saddle point separating two WZ structures with opposed polarization.

Photoexcitation was simulated by adjusting the smearing of the Fermi-Dirac distribution, such that the conduction band is effectively populated at the expense

of depleting the valence band. This effective approach has been successfully employed in a series of previous works,[18, 19, 20, 21] showing excellent agreement with more sophisticated photoexcitation methods.[22] Phonon dispersions were computed by finite differences with the Phonopy software,[23] using 4×4×34 \times4 \times3 supercells for the WZ and H phases and a 4×4×44 \times4 \times4 supercell for the RS phase. Finite-temperature renormalized phonons were obtained with the Dynaphopy software[24] by analysing ab initio molecular dynamics simulations performed with a timestep of 1.5 fs and total simulation times of ∼50\sim50 ps. Free energies were calculated within the quasiharmonic approximation.[16, 19]

Table 1 reports the electronic and dielectric properties calculated for several archetypal wurtzite materials using first-principles methods. LaN was selected as the WZ test case for this study for several reasons. First, and most importantly, since we focus on light-induced effects, the optical bandgap of LaN (Eg=2.3E_g = 2.3 eV) is ideal for radiation absorption in the visible range and, consequently, for practical applications. Second, LaN exhibits superior piezoelectric and dielectric properties compared with AlN, GaN, and ZnO (see Table 1). For instance, the piezoelectric stress tensor component along the cc-axis, e33e_{33}, is approximately 67% larger in LaN than in ZnO, and 22% @page 2/6 starts_mid=1 ends_mid=1

Material (WZ)e33e_{33} (C ⋅\cdot m−2^{-2})EgE_g (eV)PsP_s (C ⋅\cdot m−2^{-2})ϵ\epsilon (ϵ0\epsilon_0)EbE_b (meV/f.u.)
AlN1.646.11.208.6182
GaN0.613.31.2410.4468
LaN2.002.30.6117.358
ZnO1.203.30.9310.398

Table 1. Calculated electronic and dielectric properties of archetypal wurtzite materials. e33e_{33} represents the piezoelectric stress tensor component along the c-axis, EgE_g the optical bandgap, PsP_s the spontaneous electrical polarization along the c-axis, ϵ\epsilon the static dielectric tensor averaged over its diagonal components, and EbE_b the energy barrier to polarization switching.

and thereby favours the nonpolar hexagonal phase. Assessing the impact of light absorption on other competing polymorphs, such as the nonpolar rocksalt phase (RS, cubic Fm3‾mFm\overline{3}m), further corroborates the robustness of the proposed ferroelectric-switching strategy.

First-principles calculations based on density functional theory (DFT) were carried out with the VASP code,[10, 11] using an energy cutoff of 500 eV, the projector augmented wave method,[12] and the generalized gradient approximation[13] for the exchange-correlation energy. We considered three candidate crystal structures: wurtzite (WZ, space group P63/mmcP6_3/mmc), rocksalt (RS, Fm3‾mFm\overline{3}m), and layered hexagonal (H, P63/mcP6_3/mc) with AA′ stacking (see Figure 1). The Brillouin zones of the WZ and H phases were sampled with an 8×8×68 \times8 \times6 k-point grid, while a 10×10×1010 \times10 \times10 grid was used for the RS phase. Van der Waals dispersion corrections, necessary to properly describe the H phase, were accounted for with the DFT-D3 method.[14] Optoelectronic properties were calculated with the range-separated hybrid HSEsol functional.[15] Electric polarizations were estimated with the Born effective charges method.[16, 17]

Photoexcitation was simulated by adjusting the smearing of the Fermi-Dirac distribution, such that the conduction band is effectively populated at the expense

of depleting the valence band. This effective approach has been successfully employed in a series of previous works,[18, 19, 20, 21] showing excellent agreement with more sophisticated photoexcitation methods.[22] Phonon dispersions were computed by finite differences with the Phonopy software,[23] using 4×4×34 \times4 \times3 supercells for the WZ and H phases and a 4×4×44 \times4 \times4 supercell for the RS phase. Finite-temperature renormalized phonons were obtained with the Dynaphopy software[24] by analysing ab initio molecular dynamics simulations performed with a timestep of 1.5 fs and total simulation times of ∼50\sim50 ps. Free energies were calculated within the quasiharmonic approximation.[16, 19]

Table 1 reports the electronic and dielectric properties calculated for several archetypal wurtzite materials using first-principles methods. LaN was selected as the WZ test case for this study for several reasons. First, and most importantly, since we focus on light-induced effects, the optical bandgap of LaN (Eg=2.3E_g = 2.3 eV) is ideal for radiation absorption in the visible range and, consequently, for practical applications. Second, LaN exhibits superior piezoelectric and dielectric properties compared with AlN, GaN, and ZnO (see Table 1). For instance, the piezoelectric stress tensor component along the cc-axis, e33e_{33}, is approximately 67% larger in LaN than in ZnO, and 22% larger than in AlN. Likewise, the dielectric constant, ϵ\epsilon, of LaN is larger than that of the other considered WZ materials. In contrast, the spontaneous electric polarization of LaN is the smallest, although still sizable and suitable for practical applications (Ps=0.61P_s = 0.61 C⋅\cdotm−2^{-2}). In view of these properties, we propose LaN as the ideal wurtzite for experimental validation of the theoretical findings presented below.

Figure 2 shows the effect of light irradiation on the vibrational phonon spectrum of LaN in the H and WZ polymorphs. Under dark conditions (n=0n = 0), the WZ phase is fully vibrationally stable, whereas the H phase is not,

Figure 2. Phonon dispersion of the hexagonal H (top row) and WZ (bottom row) polymorphs under increasing photoexcited charge density, nn, expressed in units of e/A˚3e/\text{Å}^{3}.

as evidenced by several imaginary phonon frequencies (shown as negative values in the plot) appearing at the center of the Brillouin zone. This result is consistent with the H phase being the saddle point along the ferroelectric switching path of the WZ phase.[7, 8] Under increasing photoexcitation (n>0n > 0), however, the vibrational instabilities of the H phase disappear for photoexcited charge densities equal to or larger than 0.0050.005 e/A˚3e/\text{Å}^{3} (Figure 2). In contrast, under increasing nn all phonon frequencies of the WZ phase remain positive and real, indicating full vibrational stability; more quantitatively, some of the high-frequency WZ optical branches (>10> 10 THz) shift appreciably toward lower energies, while some of the low-frequency optical branches (<5< 5 THz) shift toward higher energies. Interestingly, the phonon spectra of the H and WZ polymorphs turn out to be practically identical at the highest analyzed nn, suggesting collapse of the two structures into a single phase.

The phonon results enclosed in Figure 2 hint at large structural variations in the considered LaN polymorphs induced by light, which in turn may alter the energy barrier to polarization switching in the WZ phase. According to a single-domain free-energy Landau-Devonshire model of the form F(P)=12αP2+14βP4−E⋅PF(P) = \frac{1}{2}\alpha P^2 + \frac{1}{4}\beta P^4 - \boldsymbol{E} \cdot\boldsymbol{P}, where PP represents the electric polarization, E\boldsymbol{E} an external electric field, and α<0\alpha< 0 and β>0\beta> 0 are parameters, the intrinsic coercive field necessary to switch the electrical polarization amounts to Ec=833⋅(Eb/Ps)E_c = \frac{8}{3\sqrt{3}} \cdot(E_b/P_s), with PsP_s being the spontaneous electric polarization and Eb≡EH−EWZE_b \equiv E_H - E_{WZ} (Table 1). [25] Although this estimation typically provides an upper bound for the coercive field observed experimentally (where ferroelectric switching proceeds through the nucleation and propagation of domains, which requires smaller fields), it illustrates that the energy barrier EbE_b, readily accessible via first-principles methods, is an appropriate descriptor for tracking possible EcE_c variations induced by external stimuli.

Table 1 reports the EbE_b values estimated for different archetypal wurtzite materials under dark conditions (n=0n = 0). Among them, LaN presents the lowest energy barrier (58 meV/f.u.), approximately three times smaller than that of AlN and half that of ZnO. Figure 3 shows the evolution of EbE_b under increasing photoexcited charge density in LaN. The energy difference between the two polymorphs is observed to decrease monotonically with increasing nn, nominally vanishing at values equal to or larger than 0.005 e−^{-}/Å3^3. This behavior is consistent with that observed in Figure 2 for the vibrational phonon spectrum, which suggests a collapse of the two structures into a single phase under sufficient light irradiation. These findings demonstrate that above-bandgap electronic photoexcitation is an effective strategy for lowering the energy barrier EbE_b, and consequently for facilitating ferroelectric switching, in wurtzite crystals.

Figure 3. (a) Energy of the WZ and H polymorphs as a function of photoexcited charge density; the energy difference Eb≡EH−EWZE_b \equiv E_H - E_{WZ} is shown in the inset. (b) Evolution of the hexagonal bond angle α\alpha in the WZ phase under increasing photoexcited charge density; the H phase is characterised by α=90∘\alpha= 90^\circ.

fig:3b reports the evolution of the hexagonal bond angle α\alpha (fig:1d,fig:1e) under increasing photoexcitation.

Under dark conditions, this angle amounts to 78.7∘78.7^\circ in the WZ phase and to 90∘90^\circ in the H phase. It is observed that α\alpha steadily increases from the characteristic WZ value at n=0n = 0 to the characteristic H value at the maximum considered photoexcited density. This result, taken together with those shown in Figure 2 and fig:3a, shows that the WZ phase spontaneously transforms into the H polymorph as a result of increasing above-bandgap electronic photoexcitation, thus significantly depleting EbE_b. This behavior, in analogy to that previously observed for polar oxides,[18, 19, 20, 21, 22] can be explained in terms of the screening of dipole-dipole interactions in polar phases caused by partial light-induced metallization, which energetically favors the related nonpolar phases.

Thus far in this study, we have focused on the impact of light absorption on the phase competition between the WZ and H polymorphs of LaN, the two phases directly involved in ferroelectric switching. However, other phases, such as the cubic nonpolar rocksalt structure (RS, Fm3ˉm\mathrm{Fm}\bar{3}\mathrm{m}), can also be thermodynamically and compositionally stabilized in binary nitrides and oxides under ordinary dark conditions.[26] It is therefore legitimate to ask whether light absorption similarly affects these competing phases, and whether such effects might alter the conclusions presented above.

Figure 4 shows the free-energy difference between the WZ and RS phases expressed as a function of photoexcited charge density and temperature. Finite-temperature effects were taken into account with the quasiharmonic approximation, considering TT-renormalized phonons.[16, 19] Under zero-temperature conditions, the energy of the ground-state WZ phase is approximately 20 meV per formula unit smaller than that of the RS phase. Under increasing photoexcitation, this energy difference increases in absolute value, with the WZ polymorph remaining the ground state. Likewise, when thermal effects are considered at room temperature, the free-energy difference FWZ−FRSF_{\mathrm{WZ}} - F_{\mathrm{RS}} follows the same trend as the corresponding internal energy difference, both qualitatively and quantitatively. These results indicate that light-induced effects on WZ ferroelectric switching are largely unaffected by the evolution of other competing nonpolar polymorphs under n≠0n \ne0 conditions.

Figure 4. Free-energy difference between the WZ and RS polymorphs, FWZF_{WZ} and FRSF_{RS}, at ambient and zero temperature expressed as a function of nn. Phonon dispersions of the WZ and RS phases are also shown; for the RS polymorph, zero-kelvin (dashed red lines) and room-temperature renormalized phonons (solid black lines) are displayed.

In summary, using first-principles calculations we have demonstrated that above-bandgap electronic photoexcitation offers an original and effective route for lowering the energy barrier to ferroelectric switching in wurtzite crystals, taking LaN as a representative test case (analogous results, not shown here, have also been obtained for ZnO). Light-induced carriers stabilize the nonpolar hexagonal phase that mediates polarization reversal relative to the wurtzite ground state, thereby significantly reducing EbE_b. This behavior, which we attribute to a photoinduced partial metallization that screens the dipole-dipole interactions stabilizing ferroelectric order, is unaffected by the light-induced evolution of other competing nonpolar phases, underscoring the robustness of the mechanism.

Because the intrinsic coercive field scales directly with this energy barrier, our results indicate that optical excitation can substantially reduce the operating voltages currently required for WZ-based ferroelectric switching, without the drawbacks associated with reducing film thickness. Beyond LaN, given the broad chemical tunability of the wurtzite family, we expect this light-facilitated switching mechanism to be readily transferable to other technologically relevant nitrides and oxides. These findings establish light as a non-invasive, low-power complement to conventional electric-field control, opening new avenues for faster, lower-voltage, and more energy-efficient non-volatile memory and neuromorphic technologies based on wurtzite ferroelectrics.

Acknowledgments

R.R. acknowledges support by MICIN/AEI/10.13039/501100011033 under grant PID2024-162811NB-100, and the Severo Ochoa Centers of Excellence Program under grant CEX2019-000917-S. C.C. acknowledges support by MICIN/AEI/10.13039/501100011033 and ERDF/EU under the grants CNS2025-165467, PID2023-146623NB-I00, PID2023-147469NB-C21 and the Maria de Maeztu Units of Excellence Programme CEX2023-001300-M, and by the Generalitat de Catalunya under grants 2021SGR-00343, 2021SGR-01519 and 2021SGR-01411. Computational support was provided by the Red Española de Supercomputación under the grants FI-2024-1-0005, FI-2024-2-0003, FI-2024-3-0004, FI-2024-1-0025, FI-2024-2-0006, FI-2024-1-0012, FI-2024-1-0015 and FI-2025-2-0015, and the Centro de Supercomputación de Galicia (CESGA).

References

  1. [1]F. Yang, Advanced Electronic Materials 11, 2400279 (2025).
  2. [2]S. Fichtner, N. Wolff, F. Lofink, L. Kienle, and B. Wagner, Journal of Applied Physics 125, 114103 (2019).
  3. [3]K.-H. Kim, I. Karpov, R. H. Olsson, and D. Jariwala, Nature Nanotechnology 18, 422 (2023).
  4. [4]H. Cho, Y. Wang, C. Leblanc, Y. Zhang, Y. He, Z. Han, X. Tong, V. D. Bumululla, J. Tan, R. H. Olsson, and D. Jariwala, Nature Communications 17, 1507 (2026).
  5. [5]Z. Hu, H. Cho, R. K. Rai, K. Bao, Y. Zhang, Z. Qu, Y. He, Y. Ji, C. Leblanc, K.-H. Kim, Z. Han, Z. Qiu, X. Du, E. A. Stach, R. Olsson, and D. Jariwala, Nano Letters 25, 13748 (2025).
  6. [6]J. Hayden, M. D. Hossain, Y. Xiong, K. Ferri, W. Zhu, M. V. Imperatore, N. Giebink, S. Trolier-McKinstry, I. Dabo, and J.-P. Maria, Phys. Rev. Mater. 5, 044412 (2021).
  7. [7]S. Calderon, J. Hayden, S. M. Baksa, W. Tzou, S. Trolier-McKinstry, I. Dabo, J.-P. Maria, and E. C. Dickey, Science 380, 1034 (2023).
  8. [8]A. J. E. Rowberg, S. Mu, M. W. Swift, and C. G. Van de Walle, Phys. Rev. Mater. 5, 094602 (2021).
  9. [10]G. Kresse and J. Hafner, Phys. Rev. B 47, 558 (1993).
  10. [11]G. Kresse and D. Joubert, Phys. Rev. B 59, 1758 (1999).
  11. [12]P. E. Blöchl, Phys. Rev. B 50, 17953 (1994).
  12. [13]J. P. Perdew, K. Burke, and M. Ernzerhof, Phys. Rev. Lett. 77, 3865 (1996).
  13. [14]S. Grimme, J. Antony, S. Ehrlich, and H. Krieg, J. Chem. Phys. 132, 154104 (2010).
  14. [15]L. Schimka, J. Harl, and G. Kresse, The Journal of Chemical Physics 134 (2011).
  15. [16]C. Menéndez and C. Cazorla, Phys. Rev. Lett. 125, 117601 (2020).
  16. [17]C. Menéndez, D. Chu, and C. Cazorla, npj Comput. Mater. 6, 76 (2020).
  17. [18]C. Cazorla, S. Bichelmainer, C. Escorihuela-Sayalero, J. Íñiguez, J. Carrete, and R. Rurali, Nanoscale 16, 8335 (2024).
  18. [19]R. Rurali, C. Escorihuela-Sayalero, J. L. Tamarit, J. Íñiguez González, and C. Cazorla, Phys. Rev. Lett. 133, 116401 (2024).
  19. [20]M. Raya-Moreno, C. Cazorla, E. Canadell, and R. Rurali, npj 2D Mater. Appl. 8, 64 (2024).
  20. [21]C. Cazorla, C. Escorihuela-Sayalero, J. Carrete, J. Íñiguez González, and R. Rurali, Adv. Funct. Mater. e2425424.
  21. [22]C. Paillard, E. Torun, L. Wirtz, J. Íñiguez, and L. Bellaiche, Phys. Rev. Lett. 123, 087601 (2019).
  22. [23]A. Togo, L. Chaput, T. Tadano, and I. Tanaka, J. Phys. Condens. Matter 35, 353001 (2023).
  23. [24]A. Carreras, A. Togo, and I. Tanaka, Comput. Phys. Commun. 221, 221 (2017).
  24. [25]H. Moriwake, B. Akkopru-Akgun, S. Calderon, E. C. Dickey, and P. Gorai, MRS Bulletin 50, 1066 (2025).
  25. [26]N. Afshar, M. Yassine, W. Liebscher, F. Hörich, A. Dadgar, and O. Ambacher, Journal of Applied Physics 139, 015704 (2026).

Paper details

vlnc:W_3urrzbm2
Version
v1 · latest
Published
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents