betaFeedback

WorksPhysics and Astronomy

Aerosol generation by the splashing of low viscosity drops impacting liquid layers

Abstract

Using theory and numerical simulations, here we describe the early stages of the impact with a velocity VV of a drop of radius RdR_d of a low viscosity liquid such as water against a layer of generic thickness HH of the same liquid. Our predictions for the initial velocity Vt≫VV_t\gg V and the diameter Ht≪RdH_t\ll R_d of the toroidal rim bordering the edge of the thin lamella which is ejected radially outwards after the impact, are in fair agreement with both the numerical results and also with the experimental measurements reported by Zhang et al [J. Fluid Mech, 690, 5, 2012]. Consequently, the present findings can be employed, for instance, to predict the initial diameters and velocities of the fastest tiny droplets which are ejected right after a rain drop falls on a liquid pool, an ubiquitous phenomenon with implications in the dispersal of contaminants and in the generation of aerosols and of ice condensation nuclei

One of the main physical processes involved in the dispersal of contaminants and in the generation of sea spray aerosol is bubble bursting, a phenomenon which can be reliably quantified using very recent results in the literature [2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12]. While the production of aerosol particles by raindrop impact on dry soil is also driven by bubble bursting [13], the falling of raindrops on wet forests, puddles, ponds, lakes [14, 15] or the sea [16, 17, 18] induce the dispersion of contaminants [15] and the production of bioaerosols and of ice condensation nuclei [19] through a different physical mechanism namely, the ejection and subsequent breakup of the very thin and fast lamella which is issued shortly after the contact between the two liquid masses, see Figure 1, a physical process known as drop splashing. However, in spite of the number of experimental, theoretical, and numerical studies devoted to analyze the impact of a drop on a liquid layer [1, 16, 17, 18, 20, 21, 22, 23, 24, 25, 26, 27], much less is known about the crucial early stages taking place when raindrops fall on a liquid pool because none of the numerous and recent studies enumerated above addresses the discrepancies between the very precise experimental measurements reported by [1] over a decade ago using high speed X-ray images and the different quantitative analyses reported so far. Indeed, while the classical theoretical result used to quantify the initial velocity of the lamella ejected after the impact depicted in Figure 1 predicts that [21] Vt∝ν−1/2V3/2V_t \propto\nu^{-1/2}V^{3/2}, with ν\nu indicating the liquid kinematic viscosity and VV the impact velocity of the drop, the experiments in [1] do not support the prediction in [21] but, instead, suggest a best fit to the data of the type Vt∼ν−1/4V1.8V_t \sim\nu^{-1/4}V^{1.8}. Motivated by this fact and with the purpose of describing the very early stages of drop impact on a liquid layer we develop a framework similar to the one used to quantify the splashing of drops impacting solid surfaces [30]. The results obtained will then be used to predict the initial velocity and the initial radius of curvature of the toroidal rim bordering the ejected liquid sheet, which breaks due to the growth of

Image not extracted

Figure 1. Numerical simulation using Basilisk [28, 29] showing the impact with a velocity VV of a drop of radius RdR_d, density ρ\rho and viscosity μ\mu onto a liquid film of depth HH of the same liquid for We=315We = 315, Oh=0.0105Oh = 0.0105, ρg/ρ=10−3\rho_g/\rho= 10^{-3}, μg/μ=1.8×10−2\mu_g/\mu= 1.8 \times10^{-2} and h=H/Rd=1.8h = H/R_d = 1.8.

azimuthal disturbances [1, 20, 31, 32, 33, 34], provoking an early splash characterized by the ejection of fast, micron-sized droplets [1, 20], with velocities Vt≫VV_t \gg V and diameters ∼Ht≪Rd\sim H_t \ll R_d [33], see Figure 1. Our predictions will be validated using the experimental measurements reported by [1, 20] and using the results of numerical simulations carried out using Basilisk [28, 29], see the Supplementary Material for details.

We first analyze the case of a liquid pool of thickness h=H/Rd→∞h = H/R_d \to\infty in terms of the dimensionless variables and parameters defined using RdR_d, VV, Rd/VR_d/V and ρV2\rho V^2 as the characteristic values of length, velocity, time and pressure, with ρ\rho, μ\mu and σ\sigma indicating, respectively, density, viscosity and the interfacial tension coefficient. In the following, lower-case letters will denote dimensionless variables to differentiate them from their dimensional counterparts, written in capitals (e.g. vt=Vt/Vv_t = V_t/V, ht=Ht/Rdh_t = H_t/R_d) and the subscript gg will be used to denote gas quantities: indeed, the numerical results also depend on the ratios ρg/ρ\rho_g/\rho and μg/μ\mu_g/\mu, which are kept constant and equal to 10−310^{-3} and 1.8×10−21.8 \times10^{-2} unless otherwise specified.

The type of splashing analyzed here occurs within the two-jets regime reported in [1], which produces the spray reported in [20] for liquids with viscosities equal or similar to that of water. The spray is composed of micron-sized secondary droplets emitted from the toroidal rim bordering the lamella, which destabilizes due to the growth of azimuthal disturbances [1, 20, 31, 32, 33, 34]. Since splashing and the disintegration of the rim bordering the ejected lamella only occurs when the values of both the Weber and Reynolds numbers are such that We=ρV2Rd/σ≳250We = \rho V^2 R_d/\sigma\gtrsim250 [1], Re=We Oh−1≫1Re = We\,Oh^{-1} \gg1, with Oh=μ/ρRdσOh = \mu/\sqrt{\rho R_d\sigma}, for the cases of interest here, vorticity is confined within very narrow regions at the free interfaces, a fact implying that the dimensionless velocity field is irrotational outside the very thin boundary layers namely, v=∇ϕ\mathbf{v} = \nabla\phi with ϕ\phi indicating the dimensionless velocity potential. Consequently, by virtue of the continuity equation ∇⋅v=0\nabla\cdot\mathbf{v} = 0, ϕ\phi satisfies the Laplace equation ∇2ϕ=0\nabla^2\phi= 0. The potential flow will be described next for t≪1t \ll1 in a frame of reference moving with the vertical velocity −V/2-V/2 (−1/2-1/2 in dimensionless terms), with the origin of times t=0t = 0 set at the instant when the bottom of the drop would contact the liquid layer if the gas was not present. In the moving frame of reference, the free interfaces of both the bottom layer and of the impacting drop—which in the moving frame of reference and for r≪1r \ll1 is a parabola of equation z=r2/2−t/2z = r^2/2 - t/2—are located, neglecting higher order terms [22, 25], at z=0±z = 0^\pm, with z=0+z = 0^+ indicating the linearized free interface of the drop and z=0−z = 0^- the corresponding linearized position of the initially flat film. The solution of the Laplace equation subjected to the far field conditions ∂ϕ/∂z(z→±∞)→±(−1/2)\partial\phi/\partial z(z \to\pm\infty) \to\pm(-1/2), to the impenetrability condition ∂ϕ/∂z(z=0,r≤a(t))=0\partial\phi/\partial z(z = 0, r \leq a(t)) = 0 and to the boundary conditions at the free interfaces ϕ(z=0±,r>a(t))=0\phi(z = 0^\pm, r > a(t)) = 0—deduced using the Euler-Bernoulli equation in the limit t≪1t \ll1 [10, 22, 25, 30, 35], is symmetric with respect to z=0z = 0—see the sketch in Figure 2—and yields the following analytical expression for the vertical velocity at the linearized free interfaces [30, 36]:

Image not extracted

Figure 2. (a) Sketch showing the impact of a drop on a liquid layer in a frame of reference moving vertically with the velocity −V/2-V/2; the dashed line indicates the parabola along which the two liquid masses collide. (b) Sketch of the linearized boundary conditions to be satisfied by ∇2Φ=0\nabla^2\Phi= 0, whose solution provides the vertical velocities given in Eq. (1), the key ingredient behind the Wagner condition [35] in Eq. (2).

∂ϕ∂z(r>a(t),z=0±)=±12(−1−2π[a(t)r2−a2(t)−arcsin⁡(a(t)r)]).(1)\frac{\partial\phi}{\partial z}(r>a(t),z=0^\pm)=\pm\frac{1}{2}\left(-1-\frac{2}{\pi}\left[\frac{a(t)}{\sqrt{r^2-a^2(t)}}-\arcsin\left(\frac{a(t)}{r}\right)\right]\right). \tag*{(1)}

In Eq. (1) a(t)a(t) indicates the dimensionless radius of the circular region, the wet region in what follows, where the two liquid masses in Figure 2 collide, entrapping a bubble of dimensionless radius rbr_b, see Figure 1. The radius a(t)a(t) is calculated through the so-called Wagner condition [35], which is nothing but the time integral of the kinematic boundary condition at the free interfaces and permits to calculate the time taken by a material point located initially at r=a2/2r = a^2/2, i.e., a point on the drop interface at t=0t = 0, to reach the bottom liquid layer. Due to the fact that the vertical velocities at the linearized free interfaces are symmetric with respect to z=0z = 0, the two liquid masses will collide at the midpoint between their initial positions namely, at z=r2/4z = r^2/4—see Figure 2—and, therefore, using the expression for the vertical velocity at the upper free interface given in Eq. (1), the Wagner condition reads [35]:

a2(t)4−t2−1π(∫0ta(τ) dτa2(t)−a2(τ)−∫0tarcsin⁡(a(τ)a(t)) dτ)=0,(2)\frac{a^2(t)}{4}-\frac{t}{2}-\frac{1}{\pi}\left(\int_0^t\frac{a(\tau)\,\mathrm{d}\tau}{\sqrt{a^2(t)-a^2(\tau)}}-\int_0^t\arcsin\left(\frac{a(\tau)}{a(t)}\right)\,\mathrm{d}\tau\right)=0, \tag*{(2)}

which is the equation for a(t)a(t) deduced and solved in [30], where it was found that a(t)=3ta(t) = \sqrt{3t}. Consequently, due to the fact that both the local velocity field and the thickness of the lamella depend on t≪1t \ll1 through a(t)a(t), the results found in [30] are also applicable here and, hence, the radial velocity of the wet region is also a˙(t)=1/(23t)\dot{a}(t) = 1/(2\sqrt{3t}); the liquid velocity at the root of the lamella, see Figure 3, which can be deduced using the Euler-Bernoulli equation along a streamline at the free interface in a frame of reference moving with the radial velocity a˙\dot{a}, is also va(t)=2a˙=3/tv_a(t) = 2\dot{a} = \sqrt{3/t} in the laboratory frame of reference. Note that the solution for the velocity field at the free interface given in Eq. (1) is not uniformly valid because it diverges for r≈a(t)r \approx a(t) where ∂ϕ/∂z≈−(1/π)a/2x\partial\phi/\partial z \approx-(1/\pi)\sqrt{a/2x}, with r=a(t)+xr = a(t) + x, x≪1x \ll1 and, hence, the term ∣∇ϕ∣2/2\lvert\nabla\phi\rvert^2/2 needs to be retained in the Euler-Bernoulli equation in an inner region namely, a lamella of thickness ha(t)h_a(t), where the blow-up of the outer velocity field in the limit x→0x \to0 of Eq. (1) is regularized. The thickness ha(t)h_a(t) is calculated imposing that the flow rate through the lamella, in the inner region, is the one posed by the outer solution at the root of the lamella namely, ∫0aa/x dx≃2aha⇒ha≃a/a˙2∝t3/2\int_0^a\sqrt{a/x}\,\mathrm{d}x \simeq2a h_a \Rightarrow h_a \simeq a/\dot{a}^2 \propto t^{3/2}, a classical result due to Wagner [22, 25, 35]. We then follow the same steps as in [30] and, similarly to the case of impact on a solid substrate, we also note from Figure 3 that the edge of the lamella is ejected at a radial velocity vtv_t that coincides with the wetting velocity at the ejection time tet_e, i.e. vt=a˙(te)=1/23/tev_t=\dot{a}(t_e)=1/2\sqrt{3/t_e}, with tet_e deduced from the condition Dvt/Dt(te)=a¨(te)∼te−3/2Dv_t/Dt(t_e)=\ddot{a}(t_e)\sim t_e^{-3/2} with Dvt/Dt<0Dv_t/Dt<0 denoting the dimensionless acceleration of the edge of the lamella. The deceleration is caused by the combined effect of both viscous and capillary stresses and is calculated by means of the momentum equation projected in the radial direction, Dvt/Dt≈Re−1vt/ht2+We−1/ht2Dv_t/Dt\approx Re^{-1}v_t/h_t^2+We^{-1}/h_t^2 [30], with ht(te)∼ha(te)∝te3/2h_t(t_e)\sim h_a(t_e)\propto t_e^{3/2} the diameter of the edge of the lamella depicted in Figure 1 and Figure 3. Consequently, the equation for the ejection time tet_e is identical to the one deduced in [30]:

Image not extracted

Figure 3. (a) In blue, numerical values obtained using Basilisk for the radial, rt(t)r_t(t), and vertical, zt(t)z_t(t), positions of the edge of the lamella defined in Figure 1, see also the Supplementary Material for further details. The thick black line is the theoretical prediction r=a(t)=3tr=a(t)=\sqrt{3t} whereas the yellow lines, tangent to rt(t)r_t(t) and zt(t)z_t(t), permit to determine the radial and vertical velocities of the edge of the lamella, vtv_t and vvv_v respectively, at t=t0=0.07t=t_0=0.07, an instant of time at which the lamella follows a ballistic trajectory −rt(t)-r_t(t) follows a straight line- and, hence, retains its velocity at the ejection instant te<t0=0.07t_e<t_0=0.07 predicted by the solution of Eq. (3), see also panel (b). (b) Numerical shape of the lamella at t0=0.07t_0=0.07 corresponding to the thin vertical black line in figure (a). The yellow circle of diameter hth_t, see also Figure 1, is the best fit to the local shape of the rim bordering the lamella. The dashed line corresponds to the parabola in Figure 2a but, in this case, it is represented in the laboratory frame of reference i.e., z=−t0/2+r2/4z=-t_0/2+r^2/4. In (a)-(b), h=1.8h=1.8, We=315We=315, Oh=0.0105Oh=0.0105.

3/2 Re−1te−1/2+We−1=c2te3/2,(3)\sqrt{3}/2\,Re^{-1}t_e^{-1/2}+We^{-1}=c^2t_e^{3/2}, \tag*{(3)}

with cc a constant coming from the factor in ht∝hah_t\propto h_a that was set to c=1.1c=1.1 in [30] for the case of drops impacting solid substrates; here, c=c(h)c=c(h) and, for simplicity, here

we set c(h)=1c(h)=1 in Eq. (3) and will absorb the dependence of tet_e on c(h)c(h) by adjusting a factor of order unity, as will be discussed below; notice that, for the reasons in [37, 38], the entrapped bubble does not appreciably influence the value of tet_e calculated through Eq. (3) which, in the limit Oh≪1Oh\ll1 of interest here yields te∼We−2/3t_e\sim We^{-2/3}. All the numerical values of vtv_t, vvv_v and hth_t in Figure 4-Figure 5 are calculated at t=t0=0.07t=t_0=0.07, see Figure 3 because, at this instant of time, the lamella follows a ballistic trajectory [30, 33] that retains its initial velocity at te≈We−2/3<0.07t_e\approx We^{-2/3}<0.07 when We>100We>100, see also [39].

Image not extracted

Figure 4. Main: vt/vt∗v_t/v_t^* with vtv_t the experimental values in Ref. [1] [ZD] and Ref. [20] [Th] for wide ranges of values Oh≲0.02Oh \lesssim0.02; vt∗=3/te/2v_t^*=\sqrt{3}/t_e/2 with tet_e the ejection time calculated solving Eq. (3)-vt∗=3/tev_t^*=\sqrt{3}/t_e for the experimental data points in [20] [Th] because the data in this case represent drop velocities: indeed, using the experiments in [40], it was shown in [33] that the secondary drops emitted directly from the root of the lamella are ejected with the velocity va=3/tv_a=\sqrt{3/t}. The values of vtv_t represented using +, indicate numerical results; see the Supplementary Material for additional numerical data. Inset: numerical values of vtv_t for We=200,315We=200,315 and Oh=0.0105Oh=0.0105 as a function of hh: notice that 0.9≤vt/vt∗≤10.9\leq v_t/v_t^*\leq1 for over two decades in hh. Due to the fact that splash does not occur for We<100We<100 [1, 26], We≥100We\geq100 in the figure.

Image not extracted

Figure 5. Numerical values of ht/ht∗h_t/h_t^* (a) and vvv_v (b), with ht∗=te3/2h_t^*=t_e^{3/2} and tet_e given by Eq. (3). The numerical results in (b) corresponding to ρg/ρ=10−3\rho_g/\rho=10^{-3}, μg/μ=0.6×10−2\mu_g/\mu=0.6\times10^{-2} and to ρg/ρ=0.33×10−3\rho_g/\rho=0.33\times10^{-3}, μg/μ=1.8×10−2\mu_g/\mu=1.8\times10^{-2} have been calculated for Oh=0.0105Oh=0.0105 and h=1.8h=1.8. The insets show the dependence on hh of: (a) ht/ht∗h_t/h_t^*, (b) vvv_v.

Figure 4 compares the experiments of [1, 20] and our numerical results with the prediction vt∗=1/23/tev_t^*=1/2\sqrt{3/t_e}, with tet_e given by the solution of Eq. (3), for wide ranges of values of We>100We>100, OhOh and hh finding that, for the conditions under which the rim disintegrates generating a spray namely, when We≳250We\gtrsim250 [1], vt≈0.9×1/23/tev_t\approx0.9\times1/2\sqrt{3/t_e} with relative errors ∼±10%\sim\pm10\%. The results in Figure 4 also reveal that the dependence on hh of the initial radial velocity of the ejecta sheet is very small, and the reason for this lies in the fact that, except for c(h)≃1c(h)\simeq1 in Eq. (3), the expressions for tet_e and a(t)a(t) in the limit h≫1h\gg1 are identical to those found for the case of drops impacting a rigid substrate considered in [30], a case that can be approached in the limit h≪1h\ll1. The comparison between the numerical values of hth_t with ht∗=te3/2h_t^*=t_e^{3/2} in Figure 5a reveals that ht≃2.2te3/2h_t\simeq2.2t_e^{3/2}, with relative errors ∼±10%\sim\pm10\% for over two decades in hh when We≳250We\gtrsim250 [1]; note that the small deviations with respect to our prediction in Figure 5a are a consequence of the thickening of the rim caused by the fact that relative volume flux into the rim is ≈ht∗(va−vt∗)≈ht∗vt∗\approx h_t^*(v_a-v_t^*)\approx h_t^*v_t^* [33] during the time interval t0−te>0t_0-t_e>0, with t0=0.07t_0=0.07 and va=3/tv_a=\sqrt{3/t}.

The initial value of the vertical velocity vvv_v in Figure 3 can also be predicted using Wagner theory [35] in the limit h≫1h\gg1, see also [25]. Indeed, the lamella is ejected at the midpoint between the initial position of the drop and the bottom liquid layer namely, at the parabola of equation z=r2/4⇒dz/dr(r=a(te))=a(te)/2≪1z=r^2/4\Rightarrow dz/dr(r=a(t_e))=a(t_e)/2\ll1 -see Figure 2- and consequently, in the moving frame of reference, vv=vt(te)a(te)/2=3/4v_v=v_t(t_e)a(t_e)/2=3/4 which means that, in the laboratory frame of reference, the vertical velocity at the ejection instant is vv(te)=1/4v_v(t_e)=1/4, a value which is much smaller than the tangential velocity, vv≪vtv_v\ll v_t with

vt∝te−1/2∝We1/3≫1v_t\propto t_e^{-1/2}\propto We^{1/3}\gg1 because, in the limit Oh≪1Oh\ll1, te∝We−2/3t_e\propto We^{-2/3} see Eq. (3). Figure 5b shows that 1/4≲vv≲11/4\lesssim v_v\lesssim1 and, in order to check if the deviations of vvv_v with respect to 1/41/4 are associated with gas effects [17, 31, 41], we have performed simulations at reduced values of ρg/ρ\rho_g/\rho and μg/μ\mu_g/\mu, finding only slight differences in the values of vvv_v but not on vtv_t, see Figure 5b as well as the Supplementary Material. Then, the reason why 1/4≲vv≲11/4\lesssim v_v\lesssim1 in Figure 5b is because the prediction vv=1/4v_v=1/4 refers to the initial value at t=tet=t_e, whereas the values depicted in Figure 5b are measured at t0>tet_0>t_e. Indeed, for instants of time t>tet>t_e, the radial velocity at the root of the lamella is va=3/tv_a=\sqrt{3/t} and, consequently, the vertical velocity at r=3tr=\sqrt{3t} in the moving frame of reference is vv(t)=va(t)a(t)/2=3/2v_v(t)=v_a(t)a(t)/2=3/2, which means that vv(t)=1v_v(t)=1 in the laboratory frame of reference. Then, the results in Figure 5b are a consequence of the relative flux of vertical momentum entering into the rim, which is accelerated vertically from vv(te)=1/4v_v(t_e)=1/4 to vv=1v_v=1.

To conclude, here we have made use of Wagner’s theory [35] and its extension accounting for capillary and viscosity effects [30], with the purpose of quantifying the early stages of a drop impacting a liquid layer of arbitrary thickness of a low viscosity liquid such as water. Our main finding here is that, since the diameters dtd_t of the droplets ejected from the rim bordering the thin ejecta sheet are proportional to the diameter hth_t [32, 33, 42] and the radial and vertical initial velocities of such droplets, vtv_t and vvv_v respectively, are the ones of the toroidal rim [33], we find that, in the usual limit Oh≪1Oh \ll1, dt∝te3/2d_t \propto t_e^{3/2}, vt∝3/tev_t \propto\sqrt{3/t_e}, 0.25≤vv≲10.25 \leq v_v \lesssim1, with tet_e the dimensionless ejection time given by Eq. (3), which depends very weakly on the film thickness hh and recovers the analogous equation deduced in [30] in the limit h≪1h \ll1. Our quantitative description remains valid within the range of dimensionless parameters characterizing the fall of raindrops on a liquid layer of generic depth: for instance, for a rain drop of radius Rd=3R_d = 3 mm, V≈8gRd(ρ/ρg)/(3CD)≈8V \approx\sqrt{8gR_d(\rho/\rho_g)/(3C_D)} \approx8 m s−1^{-1}, where we assumed that the drag coefficient of the falling drop is CD≈1C_D \approx1, a spray composed of droplets with diameters Dt≈2Rdte3/2≈5D_t \approx2R_dt_e^{3/2} \approx5 μ\mum is ejected initially into the atmosphere with a vertical velocity Vv≈8V_v \approx8 m s−1^{-1} and a tangential velocity Vt≈3Vte−1/2≈150V_t \approx\sqrt{3V}t_e^{-1/2} \approx150 m s−1^{-1} (see Figure 4 and [20]), generating an aerosol containing particles with diameters ≲5\lesssim5 μ\mum. At later times, te<t≪1t_e < t \ll1, particles with diameters Dp≳5D_p \gtrsim5 μ\mum will also be sprayed: indeed, since the radius of the wetted area increases in time as Rd3tR_d\sqrt{3t}, the rim thickness grows in time as ≈2Rdt3/2\approx2R_dt^{3/2} and the liquid velocity flowing into the lamella decays in time as V3/tV\sqrt{3/t}, the flux of particles of diameter DpD_p which will be issued at the instant tt into the surrounding atmosphere is approximately given by ≈6πRd2Vt3/2(C‾+(Dp)+C‾−(Dp))\approx6\pi R_d^2Vt^{3/2}\left(\overline{C}_{+}(D_p)+\overline{C}_{-}(D_p)\right) with C‾±(Dp)\overline{C}_{\pm}(D_p) defined in [43]; all the micron-sized solid particles emitted by drop splashing will be later on dispersed by wind. Hence, our results are applicable to describe the aerosol generated by the early splash of rain drops falling over liquid layers of arbitrary depth, an ubiquitous process with implications in climate [19] and in the dispersal of contaminants [14, 15].

Acknowledgements

This work has been supported by the Grant PID2024-156545NB-I00, financed by the Spanish MICIU/AEI/10.13039/501100011033 and by ERDF/EU.

References

  1. [1]L. V. Zhang, J. Toole, K. Fezzaa, and R. D. Deegan, Evolution of the ejecta sheet from the impact of a drop with a deep pool, Journal of Fluid Mechanics 690, 5–15 (2012).DOI
  2. [2]X. Wang, G. B. Deane, K. A. Moore, O. S. Ryder, M. D. Stokes, C. M. Beall, D. B. Collins, M. V. Santander, S. M. Burrows, C. M. Sultana, and K. A. Prather, The role of jet and film drops in controlling the mixing state of submicron sea spray aerosol particles, Proceedings of the National Academy of Sciences 114, 6978 (2017).DOI
  3. [3]A. Gañán Calvo, Revision of bubble bursting: Universal scaling laws of top jet drop size and speed, Phys. Rev. Lett. 119, 204502 (2017).DOI
  4. [4]J. M. Gordillo and J. Rodríguez-Rodríguez, Capillary waves control the ejection of bubble bursting jets, Journal of Fluid Mechanics 867, 557 (2019).DOI
  5. [5]F. J. Blanco-Rodríguez and J. M. Gordillo, On the sea spray aerosol originated from bubble bursting jets, Journal of Fluid Mechanics 886, R2 (2020).
  6. [6]L. Dubitsky, O. McRae, and J. C. Bird, Enrichment of scavenged particles in jet drops determined by bubble size and particle position, Phys. Rev. Lett. 130, 054001 (2023).DOI
  7. [7]Z. Yang, B. Ji, J. T. Ault, and J. Feng, Enhanced singular jet formation in oil-coated bubble bursting, Nat. Phys. (2023).DOI
  8. [8]L. Deike, Mass transfer at the ocean–atmosphere interface: The role of wave breaking, droplets, and bubbles, Annual Review of Fluid Mechanics 54, 191 (2022).DOI
  9. [9]X. Jiang, L. Rotily, E. Villermaux, and X. Wang, Submicron drops from flapping bursting bubbles, Proceedings of the National Academy of Sciences 119, e211924119 (2022).DOI
  10. [10]J. M. Gordillo and F. J. Blanco-Rodríguez, Theory of the jets ejected after the inertial collapse of cavities with applications to bubble bursting jets, Phys. Rev. Fluids 8, 073606 (2023).DOI
  11. [11]X. Jiang, L. Rotily, E. Villermaux, and X. Wang, Abyss aerosols: Drop production from underwater bubble collisions, Phys. Rev. Lett. 133, 024001 (2024).DOI
  12. [12]W. Chu, R. Zhang, X. Jiang, E. Villermaux, and X. Wang, Critical role of sea spray aerosol production pathways in particulate transfer across the sea-air interface, Journal of Geophysical Research: Atmospheres 130, e2025JD044168 (2025).
  13. [13]Y. Joung and C. Buie, Aerosol generation by raindrop impact on soil, Nat. Comm. 6, 6083 (2015).DOI
  14. [14]B. D. L. Fith, A. A. McCartney, and P. J. Walklate, The role of rain in dispersal of pathogen inoculum, Annual Review of Phytopathology 27, 241 (1989).
  15. [15]P. A. Paul, S. M. El-Allaf, P. E. Lipps, and L. V. Madden, Rain splash dispersal of gibberella zeae within wheat canopies in ohio, Phytopathology 94, 1342 (2004).DOI
  16. [16]D. W. Murphy, C. Li, V. d’Albignac, D. Morra, and J. Katz, Splash behavior and oily marine aerosol production by raindrops impacting oil slicks, Journal of Fluid Mechanics 780, 536–577 (2015).DOI
  17. [17]Y. S. Tian, A. B. Aldejani, T. Alghamdi, and S. T. Thoroddsen, Dancing ejecta, Journal of Fluid Mechanics 981, A4 (2024).DOI
  18. [18]W. Tran, G. Lubimov, J. Belden, N. Speirs, and J. Marston, Effects of particulate properties on splash activity and particulate destination for particle-laden drop impacts on liquid pools, Experiments in Fluids 67, 36 (2026).DOI
  19. [19]J. A. Huffman, A. J. Prenni, P. J. DeMott, C. Pöhlker, R. H. Mason, N. H. Robinson, J. Fröhlich-Nowoisky, Y. Tobo, V. R. Després, E. Garcia, D. J. Gochis, E. Harris, I. Müller-Germann, C. Ruzene, B. Schmer, B. Sinha, D. A. Day, M. O. Andreae, J. L. Jimenez, M. Gallagher, S. M. Kreidenweis, A. K. Bertram, and U. Pöschl, High concentrations of biological aerosol particles and ice nuclei during and after rain, Atmospheric Chemistry and Physics 13, 6151 (2013).DOI
  20. [20]S. T. Thoroddsen, The ejecta sheet generated by the impact of a drop, Journal of Fluid Mechanics 451, 373–381 (2002).DOI
  21. [21]C. Josserand and S. Zaleski, Droplet splashing on a thin liquid film, Physics of Fluids 15, 1650 (2003).DOI
  22. [22]S. D. Howison, J. R. Ockendon, J. M. Oliver, R. Purvis, and F. T. Smith, Droplet impact on a thin fluid layer, Journal of Fluid Mechanics 542, 1–23 (2005).DOI
  23. [23]C. Josserand and S. T. Thoroddsen, Drop impact on a solid surface, Annual Review of Fluid Mechanics 48, 365 (2016).DOI
  24. [24]C. Josserand, P. Ray, and S. Zaleski, Droplet impact on a thin liquid film: anatomy of the splash, Journal of Fluid Mechanics 802, 775–805 (2016).DOI
  25. [25]R. Cimpeanu and M. Moore, Early-time jet formation in liquid–liquid impact problems: theory and simulations, Journal of Fluid Mechanics 856, 764–796 (2018).DOI
  26. [26]T. C. Sykes, R. Cimpeanu, B. D. Fudge, J. R. Castrejón-Pita, and A. A. Castrejón-Pita, Droplet impact dynamics on shallow pools, Journal of Fluid Mechanics 970, A34 (2023).DOI
  27. [27]H. Wang, S. Liu, A.-C. Bayel-Lainé, D. Murphy, J. Katz, and O. Coutier-Delgosha, Analysis of high-speed drop impact onto deep liquid pool, Journal of Fluid Mechanics 972, A31 (2023).DOI
  28. [28]S. Popinet, An accurate adaptive solver for surface-tension-driven interfacial flows, Journal of Computational Physics 228, 5838 (2009).DOI
  29. [29]V. Sanjay, Code repository, https://github.com/VatsalSy/Impact-forces-of-water-drops-falling-on-superhydrophobic-surfaces (2022).
  30. [30]G. Riboux and J. M. Gordillo, Experiments of drops impacting a smooth solid surface: A model of a critical impact speed for drop splashing, Phys. Rev. Lett. 113, 024507 (2014).pubmed.ncbi.nlm.nih.gov/25062193
  31. [31]L. V. Zhang, J. Toole, K. Fezzaa, and R. D. Deegan, Splashing from drop impact into a deep pool: multiplicity of jets and the failure of conventional scaling, Journal of Fluid Mechanics 703, 402–413 (2012).DOI
  32. [32]G. Agbaglah and R. Deegan, Growth and instability of the liquid rim in the crown splash regime, Journal of Fluid Mechanics 752, 485–496 (2014).DOI
  33. [33]G. Riboux and J. Gordillo, The diameters and velocities of the droplets ejected after splashing, Journal of Fluid Mechanics 772, 630–648 (2015).DOI
  34. [34]E. Q. Li, M.-J. Thoraval, J. O. Marston, and S. T. Thoroddsen, Early azimuthal instability during drop impact, Journal of Fluid Mechanics 848, 821–835 (2018).DOI
  35. [35]H. Wagner, Über stoß-und gleitvorgänge an der oberfläche von flüssigkeiten, Z. Angew. Math. Mech. 12, 193 (1932).DOI
  36. [36]H. Lamb, Hydrodynamics (Cambridge University Press, 1932).
  37. [37]P. Hicks and R. Purvis, Air cushioning and bubble entrapment in three-dimensional droplet impacts, Journal of Fluid Mechanics 649, 135–163 (2010).DOI
  38. [38]For Oh ≪ 1, tₑ ≃ We⁻²/³; moreover, i) the radius from which the lamella is first ejected is a(tₑ) = √3 tₑ ≃ √3We⁻¹/³, ii) the radius of the entrapped bubble is r_b ≈ 6 (√We Oh⁻¹ μ/μ_g)⁻¹/³ [37]. Hence, the larger is the value of the ratio K = r_b/a(tₑ) ≃ 4 We¹/⁶ Oh¹/³ (μ_g/μ)¹/³, the larger is the influence of the entrapped bubble on the ejection of the lamella; in all cases considered here, K = r_b/a(tₑ) < 1.
  39. [39]For 0.1 ≤ h ≤ 0.5 and We ≥ 630, the value of t₀ > tₑ is just the instant before the rim collides with the falling droplet, t₀ ≈ 0.05.
  40. [40]S. T. Thoroddsen, K. Takehara, and T. G. Etoh, Micro-splashing by drop impacts, Journal of Fluid Mechanics 706, 560–570 (2012).DOI
  41. [41]S. T. Thoroddsen, M.-J. Thoraval, K. Takehara, and T. G. Etoh, Droplet splashing by slingshot mechanism, Phys. Rev. Lett. 106, 034501 (2011).pubmed.ncbi.nlm.nih.gov/21405277
  42. [42]G. Agbaglah, C. Josserand, and S. Zaleski, Longitudinal instability of a liquid rim, Physics of Fluids 25, 022103 (2013).DOI
  43. [43]C̄₊(Dₚ ≳ R_d t_d³/²) = 0 and C̄₊(Dₚ ≲ R_d t_d³/²) refers to the averaged value of the volume concentration of particles of diameter Dₚ existing at t = 0 at the interfaces of both the drop (+) and the liquid layer (−): C̄₊ = 1/(2πR_d t_d³/²) ∫₀²π ∫₀R_d t_d³/² C₊(θ,z,R = R_d√3t) dθ dz, with C₊ the concentration field at t = 0: indeed, R = R_d√3t is the radial position where the liquid feeding the lamella comes from [30]. C̄₋ is defined analogously.

Paper details

vlnc:W_4d6auqjp
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents