betaFeedback

WorksPhysics and Astronomy

Alfvén waves at low magnetic Reynolds number: Transitions between diffusion, dispersive Alfvén waves and nonlinear propagation

Abstract

This paper seeks whether Alfvén waves (AW) can be produced in laboratory-scale liquid metal experiments, i.e. at low-magnetic Reynolds Number (R ⁣mR\!m). AW are incompressible waves propagating along magnetic fields typically found geo and astrophysical systems. Until now, only faint linear waves have been experimentally produced in liquid metals because of the large magnetic dissipation they undergo when R ⁣m≪1R\!m\ll1. Yet, controlling laboratory AW could emulate such far remote processes as anomalous heating in the solar corona, oscillations of the Earth inner core or turbulence in the solar wind. To answer this question, we force AW with an AC electric current in a liquid metal channel in a transverse magnetic field. We derive a wave-bearing extension of the usual low−R ⁣m-R\!m MHD approximation to identify two linear regimes: The purely diffusive regime exists when NωN_ω, the ratio of the oscillation period to the timescale of diffusive two-dimensionalisation by the Lorentz force, is small. The propagative regime is governed by the ratio of the forcing period to the AW propagation timescale which, we call the Jameson number J ⁣aJ\!a after Jameson (1964), JFM. In this regime, AW are dissipative and dispersive as they propagate more slowly where velocity gradients are higher. Both regimes are recovered in the FLOWCUBE experiment, in excellent agreement with the model up to J ⁣a≲0.85J\!a \lesssim 0.85 but near the J ⁣a=1J\!a=1 resonance, high amplitude waves become clearly nonlinear. Hence, in electrically driving AW, we were able to produce some of the propagative, diffusive and nonlinear processes of astro and geophysical AW.

† Email address for correspondence: [email protected]

Introduction

The main purpose of this work is to determine whether Alfvén waves (AW) produced in liquid metal experiments can bear relevance to those in stellar or geophysical systems. Specifically, the question is whether AW can be excited and can reach sufficiently high intensity to generate complex, possibly nonlinear, dynamics despite the high dissipation they undergo.

In the absence of dissipation, AW are incompressible, non-dispersive waves propagating in electrically conducting fluids along a background magnetic field B0\mathbf{B}_0 at a phase velocity VA=B0/ρμV_A = B_0/\sqrt{\rho\mu}, where ρ\rho is the fluid’s density and μ\mu the magnetic permeability of the vacuum [77, 64, 19, 29]. In a medium of finite conductivity σ\sigma, they dissipate over a time scale τd=L2/η\tau_d = L^2/\eta, where η=(σμ)−1\eta= (\sigma\mu)^{-1} is the magnetic diffusivity. Because of the very large scale LL of stellar and geophysical systems, τd\tau_d is many orders of magnitude (typically 10710^7) greater than the propagation time scale τA=L/VA\tau_A = L/V_A. Hence, AW propagate practically unimpeded in the very low density stellar and interstellar media, the solar wind, planetary magnetospheres but also in much denser planetary interiors, where they play an important role in energy transport and dissipation [93, 67, 48]. The low dissipation favours large amplitudes and nonlinearities that underpin energy transfers between them. The solar wind offers a good example of Alfvénic turbulence, where such transfers operate across a very wide range of length scales [79, 42]. In the Sun, AW are one of the main candidates for explaining high temperatures in the solar corona [36] (Li et al. 2021). They are also commonly encountered in magnetised planetary cores, under the form of torsional AW propagating between concentric cylinders aligned with planets rotation [12, 35], or as magneto-Coriolis waves [30, 34, 94, 61]. Unfortunately, these waves are extremely difficult to study in their natural environment. Accessibility is an obvious reason, but by no means the only one: observational data produced by satellites deliver limited local data. Furthermore, Alfvén waves compete with several other magnetomechanical oscillations, for example incompressible oscillations of solar coronal loops, or magnetoacoustic waves arising out of the medium’s compressibility (see Nakariakov & Kolotkov [66] for a review). Distinguishing AW amongst these, especially with limited observational data, poses a significant challenge. Numerical simulations are challenging too because of the extreme Reynolds and magnetic Reynolds numbers at which these systems operate.

For these reasons, producing carefully controlled Alfvén waves in a laboratory formed an appealing proposition to understanding their role in natural systems ever since they were first theorised by Alfvén [3] in his seminal, yet remarkably simple paper. The immediate obstacle to such an endeavour arises from the 10810^8 to 101010^{10} factor between lengthscales of experiments and natural systems, which inflicts just as drastic a reduction in the ratio τd/τA\tau_d/\tau_A. While higher magnetic fields linearly reduce τA\tau_A, even the highest magnetic fields available to date (10 T or more) ever regain three or four orders of magnitude at best. Such is the challenge of keeping this ratio sufficiently high to observe AW, that it was named after the pioneer who made the first attempt [59]: the Lundquist number Lu=VAL/ηLu = V_A L/\eta. Lundquist tried to force AW with a conducting disc oscillating across a background magnetic field in a mercury vessel and measured the intensity of these oscillations farther down the field lines. The amplitude of the oscillations was weak with a frequency dependence relatively far from the non-viscous model he tried to match it to. Lehnert’s subsequent attempt [56] was based on a similar mechanical principle. Despite improved instrumentation and control he arrived at a similar result. While Lundquist and Lehnert’s experiments set milestones as the first laboratory experiments seeking to produce AW, the most convincing evidence of AW in liquid metals is due to Jameson [47]. The basis for his success was two new ideas: he showed theoretically that forcing waves electromagnetically instead of mechanically led to higher amplitudes and took advantage of the spatial inhomogeneity of the waves to place his probes at the locus where a local resonance maximised their amplitude. Jameson’s AW precisely matched the linear theory but their amplitude was still too low for nonlinear effects to even be noticeable. Alboussière et al. [1] tried to venture in this regime by taking advantage of electromagnets delivering up to 13 T in a 160 mm diameter bore: these authors tried to produce a self-interacting wave with an electromagnetic pulse bouncing against the ends of a vessel filled with Galinstan, a eutectic alloy liquid at room temperature. Alfvén waves were produced but their decay was too fast for the reflected and incident waves to interact. Being poloidal, these waves differed from Alfvén’s theory and previous liquid metal experiments on parallel, transversal waves. Further recent experiments focused on different aspects of linear AW: Iwai et al. [46] extracted the signature of AW from the pressure fluctuations. Magneto-Coriolis ([68, 83]) and torsional AW were produced more recently in liquid metal spherical Couette experiments (Tigrine et al. [91]). The most extreme AW experiment to date is without doubt due to Stefani et al. [89], who produced AW within a small capsule of rubidium subjected to a 63 T pulsed magnetic field of 150 ms. In this regime, compressibility enables these authors to excite a parametric resonance between magnetoacoustic and AW, when the velocities of sound and AW coincide ([98]). This mechanism involving compressibility bears relevance to those generating heat in the solar corona and this experiment is the only liquid metal experiment to have reached a nonlinear AW regime.

These experiments clearly identified a propagative behaviour with some resemblance to AW. However, the discrepancies with theory observed by Lundquist [59] and Lehnert [56] raise the question of the nature of the waves observed and how different these may be from Alfvén’s ideal waves. While Jameson [47] and Alboussière et al. [1] obtained a much better agreement with theory, they did so by better incorporating the effect of diffusion but stopped short of characterising how AW, their topology and propagation properties were affected by it. Lastly, the question of the conditions in which AW even exist in the presence of diffusion is still unexplored.

Independently, liquid metal magnetohydrodynamics (MHD) at laboratory scale has developed since the 1960s with the common assumption that the induced magnetic field is small enough for the magnetic induction diffusion to be several orders of magnitude greater than its advection by the flow, i.e. that the magnetic Reynolds number Rm=UL/ηRm = UL/\eta is vanishingly small (except where a dynamo effect was specifically sought). It became common, and sometimes justified to assume that the time scale of magnetic field fluctuations is the flow advection time scale L/UL/U, i.e. ∂tB∼u⋅∇B\partial_t \mathbf{B} \sim\mathbf{u} \cdot\nabla\mathbf{B} (see for instance Knaepen et al. [53]). This widely used assumption effectively merges the low-RmRm approximation with the quasistatic MHD (QSMHD) approximation, where magnetic field fluctuations are smeared out by diffusion ([81, 54, 28, 80]). Merging these two time scales implies that Alfvén waves cannot exist at low RmRm, which is incorrect (Ennayar et al. 2021) when this assumption is not justified ([47, 77]). This context and the limited success of liquid metal experiments in producing AW led to the idea that low-RmRm liquid metal experiments could not produce AW of relevance to their natural settings where Lu≫1Lu \gg1 and Rm≫1Rm \gg1. Plasmas, by contrast, soon appeared as an alternative to liquid metals due to their naturally high Lundquist numbers, especially when plasma technology for nuclear fusion emerged in the 1950s. The first indisputable evidence of AW was indeed obtained from a measure of wave velocity in a plasma ([4]), followed by further experiments ([95, 49, 96]), and the generation of linear interferences between AW ([33]). The first AW nonlinearities in plasmas were, however, obtained much more recently: the observation of parametric instabilities and nonlinear transfers between AW [16, 25] achieved an important step towards Alfvénic turbulence in the laboratory [43, 44]. While the compressibility of plasmas makes it more difficult to isolate AW from other waves, for example magnetoacoustic waves [24], it also makes them relevant to the solar corona and the solar wind. Plasmas also pose serious challenges in terms of metrology and require much heavier technological environments than liquid metals. Liquid metals, by contrast are incompressible, very dense and bear close similarities with planetary cores, but current experiments with them are scarce and mostly target the linear regime.

As a result, the current state of understanding of AW is relatively limited, considering they were discovered over 80 years ago. To this date there have been no experiments reproducing Alfvénic turbulence or any which are able to reproduce the complex nonlinear effects taking place in solar or geophysical systems. Even deriving reliable laws for their reflections against walls poses considerable challenges [82]. Yet, evidence of their role in stellar and planetary interiors accumulates in simulations, and observations [92, 35, 36, 66, 34, 84] (Li et al. 2021). A new form of helioseismology and planetary seismology using AW is even emerging as powerful means of probing the interior of the Sun and Jupiter [37, 41]. It is also becoming increasingly clear that wherever AW play a role, they do so through dissipation and nonlinearity, rather than in a regime of ideal linear AW. In the solar corona, thin dissipation layers may be the missing heat source that could explain high temperatures there [36], and high dissipation occurs at small scales energised by nonlinear transfer from larger scales (Davila 1987). In spherical shells representing planetary interiors, dissipation layers are required to obtain a correct solution describing the propagation of quasi-two-dimensional torsional AW [60]. These examples illustrate that the regions where AW play the most crucial role are much smaller than the planetary or solar scales, so at these scales, the local Lundquist number may fall in a range accessible to liquid metal experiments 1≤Lu≤1021 \le Lu \le10^{2} [18, 85]. The dissipative behaviour of liquid metal experiments may therefore not be as irrelevant to astrophysical and geophysical problems as the staggering values of LuLu in these problems suggest. At the same time, liquid metal technology has made strides since Jameson’s success: experiments [50, 8] conducted in very high magnetic fields (up to 10 T and rising) now offer extensive flow mapping based on ultrasound velocimetry [13, 32] and low-noise high-precision electric potential velocimetry (EPV) [52, 31, 9].

The role of dissipation and nonlinearities, the mounting need to understand complex AW and the availability of these technologies prompts us to seek the conditions in which AW can be obtained at low–RmRm and whether these can be obtained sufficiently far from the QSMHD regime for AW to incur nonlinear effects. To do this, we take advantage of electric forcing and transverse inhomogeneity as Jameson [47] did, and implement these ideas in high magnetic fields by adapting the FlowCube device [50, 74, 9, 8, 69], which we previously developed to study MHD turbulence. We seek to answer the following key questions.

  • (i) In which conditions do AW propagate at low RmRm, despite diffusion?

  • (ii) How do dissipative AW differ from the ideal non-dissipative, non-dispersive AW, especially where they are not homogeneous in planes normal to the field?

  • (iii) Can a nonlinear regime of AW be reached in liquid metals at low RmRm?

We first revisit the low–RmRm approximation, to specifically allow wave propagation, i.e. outside the QSMHD regime (§ 2). Based on this approximation, a semi-analytical model for the propagation of linear AW in a plane channel normal to a background magnetic field is derived. Using this model, we analyse the flow in a channel forced by an alternating current (AC) injected at a localised electrode embedded in one of the walls, to identify the diffusive and the propagative regimes (§ 3). Then, a similar flow is experimentally generated with FlowCube whose principle and electric potential measurement system are summarised in § 4. By comparing theory and experiments, we finally identify the diffusive and propagative regimes in the experiment, and seek nonlinearities where discrepancies between model and experiment arise (§ 5).

Linear theory of confined Alfvén waves

General configuration and governing equations

We consider a channel of height hh (Figure 1) filled with an electrically conducting incompressible fluid of density ρ\rho, kinematic viscosity ν\nu and electric conductivity σ\sigma and subjected to an axial, homogeneous and static magnetic field B0=B0ez\mathbf{B}_0 = B_0 \mathbf{e}_z. The domain is bounded by two horizontal solid, impermeable and electrically insulating walls at z~=0\tilde{z} = 0 and z~=h\tilde{z} = h, thereafter referred to as Hartmann walls as they are normal to the magnetic field. The flow is forced at the bottom wall by injecting an axial AC current density j~z(r~,θ,z~=0,t~)=j~w(r~,θ)cos⁡(ωt~)ez\tilde{\mathbf{j}}_z(\tilde{r}, \theta, \tilde{z} = 0, \tilde{t}) = \tilde{j}^{w}(\tilde{r}, \theta) \cos(\omega\tilde{t}) \mathbf{e}_z of angular frequency ω\omega and magnitude j~w\tilde{j}^{w}. The amplitude of the total current injected at the bottom wall is I0I_0. Normalising distances by hh, time by 2π/ω2\pi/\omega, velocity by u0u_0, magnetic

Image not extracted

Figure 1. Sketch of the general configuration, where Alfvén waves confined between two horizontal walls spaced hh apart evolve in the electrically conducting incompressible fluid subjected to a homogeneous, static and axial magnetic field B0=B0ez\mathbf{B}_0 = B_0\mathbf{e}_z. An axial AC current density j~w\tilde{\mathbf{j}}^w is injected at the bottom wall, which can be expressed in term of the magnetic disturbance b~w\tilde{\mathbf{b}}^w by means of Ampère’s law. The top wall is electrically insulated. Both walls are solid, no-slip and impermeable.

fields by B0B_0, current density by j0=I0/h2j_0 = I_0/h^2 and pressure by ρu02\rho u_0^2, the governing equations for the velocity u\mathbf{u}, pressure pp and magnetic disturbance to the external field b=B−B0ez\mathbf{b} = \mathbf{B} - B_0\mathbf{e}_z are the Navier-Stokes equations, the induction equation, as well as the conservation of mass and magnetic flux,

Rν ∂tu+Re{u⋅∇u+∇p}=Δu+Ha2Rm−1{∂zb+b⋅∇b},(1)R_{\nu}\,\partial_t \mathbf{u} + Re\{\mathbf{u}\cdot\nabla\mathbf{u}+\nabla p\}=\Delta\mathbf{u}+Ha^2 Rm^{-1}\{\partial_z\mathbf{b}+\mathbf{b}\cdot\nabla\mathbf{b}\}, \tag*{(1)}
Rη∂tb=Δb−Rm{u⋅∇b−b⋅∇u−∂zu},(2)R_{\eta}\partial_t\mathbf{b}=\Delta\mathbf{b}-Rm\{\mathbf{u}\cdot\nabla\mathbf{b}-\mathbf{b}\cdot\nabla\mathbf{u}-\partial_z\mathbf{u}\}, \tag*{(2)}
∇⋅u=0,(3)\nabla\cdot\mathbf{u}=0, \tag*{(3)}
∇⋅b=0,(4)\nabla\cdot\mathbf{b}=0, \tag*{(4)}

where Δ\Delta is the vectorial Laplacian operator. The five non-dimensional numbers governing this system are, respectively, the Reynolds number, the magnetic Reynolds number, the Hartmann number and the screen parameters for viscous and magnetic diffusion,

Re=u0hν,Rm=u0hη,Ha=B0hσρν,Rν=ωh22πνRη=ωh22πη,(5)Re=\frac{u_0h}{\nu},\quad Rm=\frac{u_0h}{\eta},\quad Ha=B_0h\sqrt{\frac{\sigma}{\rho\nu}},\quad R_{\nu}=\frac{\omega h^2}{2\pi\nu}\quad R_{\eta}=\frac{\omega h^2}{2\pi\eta}, \tag*{(5)}

where η=(σμ0)−1\eta=(\sigma\mu_0)^{-1} is the magnetic diffusivity.

Here, RmRm measures the ratio of magnetic field advection by the flow to magnetic field diffusion while ReRe measures the ratio between inertia and viscous forces. The square of the Hartmann number HaHa measures the ratio of Lorentz to viscous forces. Finally, RνR_{\nu} (respectively, RηR_{\eta}) measures the square ratio of the viscous diffusive (respectively, resistive) penetration depth of boundary oscillations into the domain to the domain’s size (see for example Batchelor [10]).

So far, the characteristic velocity u0u_0 is not defined. However, driving flows with a current I0I_0 injected at a single electrode induce a circulation Γ=I0/[2π(ρσν)1/2]\Gamma=I_0/[2\pi(\rho\sigma\nu)^{1/2}], which together with lengthscale hh provides the usual velocity scale for electrically driven flows and the corresponding Reynolds number (Sommeria [87]),

u0=Γ/h,Re0=I0/[2πν(σρν)1/2].(6)u_0=\Gamma/h,\qquad Re_0=I_0/[2\pi\nu(\sigma\rho\nu)^{1/2}]. \tag*{(6)}

The quantity Re0Re_0 thus provides a non-dimensional measure of the forcing intensity (Klein & Pothérat [50]). Additionally, the magnetic Reynolds number based on u0u_0, Rm0Rm_0, is also determined by this choice, since the ratio Rm0/Re0=Rη/Rν=PmRm_0/Re_0=R_{\eta}/R_{\nu}=Pm is the magnetic Prandtl number and is fixed for a given choice of fluid. It should be noted that since the expression of Γ\Gamma accounts only for the Lorentz force due to the injected current and dissipation in the Hartmann layers, the scale u0u_0 may significantly overestimate the actual velocities in the fluid. Hence, it should be better understood as a measure of the forcing. Reynolds and magnetic Reynolds numbers based on actual velocities (defined in § 4.4) are discussed in § 5.

The kinematic boundary conditions at the top and bottom Hartmann walls are no-slip impermeable,

u(r,θ,z=0,t)=u(r,θ,z=1,t)=0.(7)\mathbf{u}(r,\theta,z=0,t)=\mathbf{u}(r,\theta,z=1,t)=0. \tag*{(7)}

At the bottom wall (z=0z=0) the normal electric current is imposed and the top wall (z=1z=1) is electrically insulating. These conditions are expressed in terms of the magnetic disturbance b\mathbf{b} by means of Ampere’s law,

∇×b(r,θ,z=0,t)⋅ez=jw(r,θ)cos⁡(t),(8)\nabla\times\mathbf{b}(r,\theta,z=0,t)\cdot\mathbf{e}_z=j^w(r,\theta)\cos(t), \tag*{(8)}
∇×b(r,θ,z=1,t)⋅ez=0.(9)\nabla\times\mathbf{b}(r,\theta,z=1,t)\cdot\mathbf{e}_z=0. \tag*{(9)}

Integration in the plane of each Hartmann wall, respectively, leads to inhomogeneous and homogeneous conditions for b\mathbf{b} at the bottom and top walls,

b⊥(r,θ,z=0,t)=bw(r,θ)cos⁡(t),b(r,θ,z=1,t)=0,(10)\mathbf{b}_{\perp}(r,\theta,z=0,t)=\mathbf{b}^w(r,\theta)\cos(t),\qquad\mathbf{b}(r,\theta,z=1,t)=0, \tag*{(10)}

where the subscript ⊥\perp stands for projection in the horizontal plane (r,θ)(r,\theta) and bwb^{w} is uniquely defined by the choice of jwj^{w}.

A propagative low-Rm approximation

We start by simplifying the governing equations in the limit Rm→0Rm \to0 in way suitable to describe the propagation of waves in liquid metals. In the low-RmRm approximation, the physical quantities b\boldsymbol{b} and u\boldsymbol{u} are expanded in powers of RmRm. Thus, the induction equation at the leading order, O(Rm0)O(Rm^{0}), readily implies

Rη∂tb=Δb.(11)R_{\eta}\partial_{t}\boldsymbol{b}=\Delta\boldsymbol{b}. \tag*{(11)}

Indeed, for the fluid motion to actually induce a magnetic field, the transport term and the magnetic diffusion must balance which implies Δb=O(Rm)\Delta\boldsymbol{b}=O(Rm) and therefore b=O(Rm)\boldsymbol{b}=O(Rm) [77]. Since u=O(Rm0)\boldsymbol{u}=O(Rm^{0}), this implies that b/u=O(Rm)b/u=O(Rm) so that forcing AW electromagnetically requires forcing amplitudes RmRm times smaller than forcing them mechanically. Hence, as noted by Jameson [47], AW are much more efficiently forced electromagnetically than using the sort of mechanical forcing of the early experiments of Lundquist [59] and Lehnert [56]. Denoting b~=Rm−1b\widetilde{\boldsymbol{b}}=Rm^{-1}\boldsymbol{b} and keeping O(Rm0)O(Rm^{0}) terms in (1) and all highest remaining terms, i.e. of order O(Rm)O(Rm), in the induction equation (2) yields

(Rν∂t−Δ)u=Ha2∂zb~,(12)(R_{\nu}\partial_{t}-\Delta)\boldsymbol{u}=Ha^{2}\partial_{z}\widetilde{\boldsymbol{b}}, \tag*{(12)}
(Rη∂t−Δ)b~=∂zu.(13)(R_{\eta}\partial_{t}-\Delta)\widetilde{\boldsymbol{b}}=\partial_{z}\boldsymbol{u}. \tag*{(13)}

Importantly, since these equations result from an asymptotic expansion in RmRm, RmRm disappears in the linearised low-RmRm approximation but three governing non-dimensional numbers are left: the Hartmann number HaHa and the two screen parameters RηR_{\eta} and RνR_{\nu}. Eliminating either b\boldsymbol{b} or u\boldsymbol{u} reveals that both variables obey the same formal equation

((Rν∂t−Δ)(Rη∂t−Δ)−Ha2∂zz2){u,b~}=0.(14)\left((R_{\nu}\partial_{t}-\Delta)(R_{\eta}\partial_{t}-\Delta)-Ha^{2}\partial_{zz}^{2}\right)\{\boldsymbol{u},\widetilde{\boldsymbol{b}}\}=0. \tag*{(14)}

Equations (12)-(13) or equation (14) are the mathematical expression of the propagative low-RmRm approximation in the limit Re→0Re\to0. They are different from the QSMHD approximation discussed in § 2.3, which requires the additional assumption that Rη→0R_{\eta}\to0. The equations for the low-RmRm approximation for arbitrary ReRe are obtained simply by retaining the nonlinear and pressure terms Re{u⋅∇u+∇p}Re\{\boldsymbol{u}\cdot\nabla\boldsymbol{u}+\nabla p\} in the left-hand side of (12). Several authors used a MHD equation resembling these. The equations of Lehnert [57] and Moffatt [63] include the ∂tb\partial_{t}b term but are missing the u⋅∇b\boldsymbol{u}\cdot\nabla b term in the induction equation, and the nonlinear term in the momentum equation. While these are derived dimensionally, they are not obtained directly as an asymptotic form of the full MHD equations in the limit Rm→0Rm\to0 and only apply to infinitesimal magnetic field and velocity perturbations of a background state with a constant magnetic fields and no flow. Knaepen et al. [53] started from the dimensional full MHD equations and dropped the u⋅∇b\boldsymbol{u}\cdot\nabla b term in the induction equation but kept the full nonlinear terms in the Navier-Stokes equations. These equations, termed quasilinear are effectively the dimensional form of the propagative low-RmRm approximation. They were justified empirically by comparing numerical simulations of the full MHD equations and the QSMHD equations but not analytically derived from the full MHD equations. Here, introducing a separate time scale for the terms with time derivative enabled us to derive the propagative low-RmRm as an asymptotic limit of the full MHD equations for the first time. This provides a rigorous justification to the equations used by Knaepen et al. [53]’s.

Indeed the numerical simulations conducted by these authors confirm the effectiveness of the propagative low-RmRm approximation for Rm≲1Rm \lesssim1.

Up to this point, boundary conditions have only been specified at the top and bottom walls, but the conditions at the lateral boundaries have remained unspecified. Let us now assume that these allow for a solution of Eq (14) to be found by separation of variables under the form

{u,b~}(r,θ,z,t)={U⊥(r,θ,z) Uz(r,θ,z),B⊥(r,θ,z) Bz(r,θ,z)}exp⁡(jϵt)+c.c.,(15)\{\mathbf{u},\widetilde{\mathbf{b}}\}(r,\theta,z,t)=\{\mathbf{U}^{\perp}(r,\theta,z)\,U^{z}(r,\theta,z),\mathbf{B}^{\perp}(r,\theta,z)\,B^{z}(r,\theta,z)\}\exp(j\epsilon t)+\mathrm{c.c.}, \tag*{(15)}

where ϵ=±1\epsilon=\pm1 and jj is the imaginary unit. Here, {U⊥,B⊥}\{\mathbf{U}^{\perp},\mathbf{B}^{\perp}\} and {Uz,Bz}\{U^{z},B^{z}\} are the eigenfunctions of the Sturm–Liouville problems, respectively, associated with the directions perpendicular and parallel with the magnetic field directions, with respective eigenvalues (−λ⊥,−λz)∈C2(-\lambda_{\perp},-\lambda_z)\in\mathbb{C}^2,

(Δ⊥+λ⊥){U⊥,B⊥}=0,(16)(\Delta_{\perp}+\lambda_{\perp})\{\mathbf{U}^{\perp},\mathbf{B}^{\perp}\}=0, \tag*{(16)}
(∂zz2+λz){Uz,Bz}=0,(17)(\partial_{zz}^2+\lambda_z)\{U^z,B^z\}=0, \tag*{(17)}

with Δ⊥=Δ−∂zz2\Delta_{\perp}=\Delta-\partial_{zz}^2. This decomposition leads to the dispersion relation,

λz2+(Ha2+2λ⊥+ϵj(Rν+Rη))λz−RνRη+λ⊥2+ϵj(Rν+Rη)λ⊥=0.(18)\lambda_z^2+\left(Ha^2+2\lambda_{\perp}+\epsilon j(R_\nu+R_\eta)\right)\lambda_z-R_\nu R_\eta+\lambda_{\perp}^2+\epsilon j(R_\nu+R_\eta)\lambda_{\perp}=0. \tag*{(18)}

The boundary conditions at z=0z=0 and z=1z=1 impose that UzU^z and BzB^z be of the form Cexp⁡{j(κ+js)z}C\exp\{j(\kappa+js)z\}, where λz=(κ+js)2\lambda_z=(\kappa+js)^2 incorporates real wavenumber κ\kappa and spatial attenuation ss. The eigenvalues λ⊥\lambda_{\perp} are determined by the geometry and boundary conditions in the horizontal plane. These are left unspecified for now, but we shall simply assume that λ⊥=κ⊥2>0\lambda_{\perp}=\kappa_{\perp}^2>0 to cover the most common cases such as rectangular, periodic or axisymmetric domains. This choice enables us to introduce a real transverse wavenumber κ⊥∈R\kappa_{\perp}\in\mathbb{R}. Under these assumptions, the dispersion relation admits four solutions λz,m=±(κm+jsm)2\lambda_{z,m}=\pm(\kappa_m+js_m)^2, where m∈{1,2}m\in\{1,2\}, is expressed as

κm=±12[−Ha2−2κ⊥2+ϵma+{(−Ha2−2κ⊥2+ϵma)2+(−Rν−Rη+ϵmb)2}1/2]1/2,(19)\kappa_m=\pm\frac{1}{2}\left[-Ha^2-2\kappa_{\perp}^2+\epsilon_m a+\left\{\left(-Ha^2-2\kappa_{\perp}^2+\epsilon_m a\right)^2+\left(-R_\nu-R_\eta+\epsilon_m b\right)^2\right\}^{1/2}\right]^{1/2}, \tag*{(19)}
sm=±ϵ12[Ha2+2κ⊥2−ϵma+{(−Ha2−2κ⊥2+ϵma)2+(−Rν−Rη+ϵmb)2}1/2]1/2,(20)s_m=\pm\epsilon\frac{1}{2}\left[Ha^2+2\kappa_{\perp}^2-\epsilon_m a+\left\{\left(-Ha^2-2\kappa_{\perp}^2+\epsilon_m a\right)^2+\left(-R_\nu-R_\eta+\epsilon_m b\right)^2\right\}^{1/2}\right]^{1/2}, \tag*{(20)}

with

a=12[Ha4+4κ⊥2Ha2−(Rν−Rη)2+{[Ha4+4κ⊥2Ha2−(Rν−Rη)2]2+4Ha4(Rν+Rη)2}1/2]1/2,(21)a=\frac{1}{\sqrt{2}}\left[Ha^4+4\kappa_{\perp}^2Ha^2-(R_\nu-R_\eta)^2+\left\{\left[Ha^4+4\kappa_{\perp}^2Ha^2-(R_\nu-R_\eta)^2\right]^2+4Ha^4(R_\nu+R_\eta)^2\right\}^{1/2}\right]^{1/2}, \tag*{(21)}
b~=12[−Ha4−4κ⊥2Ha2+(Rν−Rη)2+{[Ha4+4κ⊥2Ha2−(Rν−Rη)2]2+4Ha4(Rν+Rη)2}1/2]1/2,(22)\widetilde{b}=\frac{1}{\sqrt{2}}\left[-Ha^4-4\kappa_{\perp}^2Ha^2+(R_\nu-R_\eta)^2+\left\{\left[Ha^4+4\kappa_{\perp}^2Ha^2-(R_\nu-R_\eta)^2\right]^2+4Ha^4(R_\nu+R_\eta)^2\right\}^{1/2}\right]^{1/2}, \tag*{(22)}

and ϵm=(−1)m\epsilon_m=(-1)^m. The two families of solutions m=1m=1 and m=2m=2 have very different damping and propagation properties. Solutions from the first family (subscript 1) decay very fast in the zz-direction, as the spatial decay rate s1s_1 is always greater than the wavenumber κ1\kappa_1, and so the corresponding profile mostly follows an exponential decay away from the top and bottom boundaries, without achieving a complete oscillation. Physically, this mode represents the Hartmann boundary layers that develop along the bottom and top walls and we shall refer to it as Hartmann mode for this reason. As such, s1∼Has_1 \sim Ha in the limit Ha→∞Ha \to\infty, keeping κ⊥≪Ha\kappa_\perp\ll Ha.

In contrast, solutions from the second family (subscript 2) are much less attenuated in the zz-direction. Depending on the value of parameters HaHa and κ⊥\kappa_\perp, a range of values of RηR_\eta may exist such that s2<κ2s_2 < \kappa_2. In other words, an oscillatory solution develops into the fluid layer, which can describe the propagation of a wave. Hence, we shall refer to this mode as the Alfvén mode. The properties of the Alfvén mode are best illustrated in the diffusionless limit, where the acceleration term (with the time derivative) and the Lorentz force (last term of Eq. (14)) balance each other, as the diffusive terms become negligible compared with them. This regime is achieved in the limit where Rν→∞R_\nu\to\infty and Rη→∞R_\eta\to\infty keeping Ha2/(RνRη)Ha^2/(R_\nu R_\eta) finite for the Lorentz force to remain finite. This number characterises waves driven at a specific frequency ω\omega such as in Lundquist, Lehnert and Jameson’s experiments. It can be expressed as the inverse of a Lundquist number based on the time scale of the oscillation instead of the magnetic diffusion time scale. However, since Jameson [47] was the first to have successfully produced strong AW resonances, precisely by adjusting the forcing frequency, we propose to name this number after him and define the Jameson number as Ja=(RηRν)1/2/Ha=Rη/(VAh/η)=Rη/LuJa = (R_\eta R_\nu)^{1/2}/Ha = R_\eta/(V_Ah/\eta) = R_\eta/Lu, where VA=B0/(ρμ0)1/2V_A = B_0/(\rho\mu_0)^{1/2} is the Alfvén velocity. When Ha2→∞Ha^2 \to\infty but keeping Ha2/(RηRν)Ha^2/(R_\eta R_\nu) constant and finite, Eq. (14) then reduces to the purely hyperbolic equation for the propagation of these waves in an ideal medium,

(∂t2−Ja−2∂zz2){u,b~}=0.(23)\left(\partial_t^2-Ja^{-2}\partial_{zz}^2\right)\{\mathbf{u},\widetilde{\mathbf{b}}\}=0. \tag*{(23)}

In the absence of viscous diffusion, the governing equations drop to second order and the no-slip conditions at the top and bottom boundaries need not be satisfied. For an AC injected current jwj^w with sinusoidal waveform, a sinusoidal wave propagates through the layer, with wavenumber found as the asymptotic value of κ2\kappa_2 in this limit,

κ2∼±Ja=±(RηRν)1/2Ha.(24)\kappa_2 \sim\pm Ja = \pm\frac{(R_\eta R_\nu)^{1/2}}{Ha}. \tag*{(24)}

Since the influence of the horizontal geometry (through κ⊥\kappa_\perp) disappears in the diffusionless limit, diffusionless AW are non-dispersive. Hence, for a flow forced by imposing a boundary condition at one of the Hartmann walls, this boundary condition simply propagates uniformly and without dispersion along zz at speed VAV_A. This also illustrates that the dispersive nature of the waves propagating outside the non-dissipative regime stems from the magnetic and viscous dissipation.

The QSMHD limit

While the set of governing equations (2.12-2.13) potentially supports waves, it only does so when the magnetic field oscillations are not fully damped by magnetic diffusion. By contrast, the waveless regime where waves are overdamped takes place in the QSMHD limit, where magnetic diffusion acts much faster than the time scale of the induced magnetic field fluctuations, i.e. when Rη→0R_\eta\to0. In the Navier–Stokes equation, on the other hand, since no assumption is made on HaHa or RνR_\nu, RνRm=O(Rm)R_\nu R_m = O(R_m), Ha2∂zb∼Ha2Rm=O(Rm)Ha^2\partial_{z}b \sim Ha^2 R_m = O(R_m) so all terms in Eq. (12) are O(Rm)O(R_m) and must be retained.

In other words, while the resistive screen parameter RηR_{\eta} must be 0 in the QSMHD limit, the viscous screen parameter RνR_{\nu} and the Hartmann number HaHa may retain finite values. Since, RνR_{\nu} remains finite whilst RηR_{\eta} vanishes, this approximation requires that Pm=Rη/Rν→0Pm = R_{\eta}/R_{\nu} \to0, and so applies to MHD flows of liquid metals or conducting electrolytes [5, 65] (Aujogue et al. 2016) but not necessarily to plasmas. In the end, the linearised low-RmRm QSMHD equations take the form

(Rν ∂t−Δ) u=Ha2 ∂z2b~,(25)(R_{\nu}\,\partial_t-\Delta)\,\mathbf{u}=Ha^2\,\partial_z^2\widetilde{\mathbf{b}}, \tag*{(25)}
Δb~=−∂zu,(26)\Delta\widetilde{\mathbf{b}}=-\partial_z\mathbf{u}, \tag*{(26)}

and the governing equation for u\mathbf{u} and b\mathbf{b} simplifies to

((Rν ∂t−Δ)Δ+Ha2∂zz2){u,b~}=0,(27)\left((R_{\nu}\,\partial_t-\Delta)\Delta+Ha^2\partial_{zz}^2\right)\{\mathbf{u},\widetilde{\mathbf{b}}\}=0, \tag*{(27)}

with the following dispersion relation

λz2+(Ha2+2λ⊥+ϵjRν)λz+ϵjRνλ⊥+λ⊥2=0.(28)\lambda_z^2+\left(Ha^2+2\lambda_{\perp}+\epsilon jR_{\nu}\right)\lambda_z+\epsilon jR_{\nu}\lambda_{\perp}+\lambda_{\perp}^2=0. \tag*{(28)}

Formally, Eq. (27) expresses the eigenvalue problem for the dissipation operator Δ−Ha2Δ−1∂zz2\Delta-Ha^2\Delta^{-1}\partial_{zz}^2, with ϵjRν\epsilon jR_{\nu} as the eigenvalue [71, 72]. The corresponding eigenfunctions offer a minimal basis for the representation of MHD flows in the QSMHD approximation [26, 73, 55, 75]. In the QSMHD approximation, the Lorentz force acts to diffuse momentum of transverse lengthscale l⊥l_{\perp} along the magnetic field over distance lzl_z in time scale τ2D=(ρ/(σB2))(lz/l⊥)2\tau_{2D}=(\rho/(\sigma B^2))(l_z/l_{\perp})^2 [88]. Structures of sufficiently large scale for this process to overcome viscous dissipation and inertia become quasi-two-dimensional [50, 74, 8]. Since waves do not propagate in the quasi-static limit, comparing solutions from the QSMHD equations with those of the propagative low-RmRm equations derived in § 2.2 provides us with an effective way to detect wave propagation.

Choice of the induction time scale

The time scale of the induction term ∂tb\partial_t\mathbf{b} in the induction equation (2) is crucial and deserves a more detailed discussion. Here, this induction time scale τb\tau_b is set by the frequency of the electric forcing such that τb=2π/ω\tau_b=2\pi/\omega. Formally, this introduces a time scale that is independent from other flow time scales and yields two non-dimensional parameters RνR_{\nu} and RηR_{\eta} built on its ratio to the viscous and ohmic dissipation time scales. The advantage of this approach is that the equations do not suffer from any a priori assumption on that time scale, so in practice, τb\tau_b can be varied arbitrary and represents any process controlling the induction. In this sense this is the most general non-dimensional form of the induction equation. This also means that varying the frequency of the electric forcing offers a practical means of controlling the induction independently of other processes. The laws obtained with this approach can then be applied to particular cases where the induction time scale is controlled by a specific process, be it advection, convection [78, 21] or anything else, simply by replacing 2π/ω2\pi/\omega by the relevant time scale.

Flows that are either not externally forced, or forced sufficiently slowly for the forcing time scale 2π/ω2\pi/\omega to be much greater than other flow time scales are a very common and important example. Alfén waves may then be produced by fluid motion itself (i.e. by advection), or occur as a result of a natural resonance. This leaves two possible time scales for the induction: the advective time scale τu=h/U\tau_u=h/U or the natural time scale of AW τa=h/Va\tau_a=h/V_a. This choice is decided by the Alfvén number A=τa/τuA=\tau_a/\tau_u. If A≫1A\gg1, the fastest time scale is set by advection, so τb=τu\tau_b = \tau_u and Rη=RmR_\eta= R_m, so that for Rm≪1R_m \ll1, the induction term becomes O(Rm2)O(R_m^2) and the low-RmR_m approximation reverts to the quasistatic (QS) approximation for which no waves exist. If on the other hand Al≪1Al \ll1, then τb=τa\tau_b = \tau_a, Rη=LuR_\eta= Lu and waves can exist only if Lu≫1Lu \gg1 (typically Lu≳10Lu \gtrsim10), i.e. if they overcome ohmic dissipation. In this case, the low-RmR_m approximation does not revert to the QS approximation and may support waves.

Yet, by far the most common choice for τb\tau_b at Rm≪1R_m \ll1 is τu=h/u0\tau_u = h/u_0; see for example Knaepen et al. [53]; Sarris et al. [81]; Knaepen & Moreau [54]; Sarkar et al. [80]. From the discussion above, this choice is only justified when Al≫1Al \gg1. When Al≲1Al \lesssim1, setting τb=τu\tau_b = \tau_u artificially eliminates waves from problems where they may exist. It amounts to forcibly replacing the low-RmR_m approximation, which may support waves, by the QS approximation, which cannot.

Finally, it is noteworthy that the condition on the Alfvén number expresses that waves have to overcome advection to propagate too, and not just dissipation. Such a transition between advective and propagative regimes has been extensively studied for inertial waves in flows with background rotation. In particular, the transition exhibits a wavelength dependence that may result in waves being confined to specific regions of the energy spectrum in turbulent flows ([23, 22, 97, 14 b])

Electrically driven waves

Wave driven by injecting current with a single electrode

We now turn to the more specific case where the flow is forced by injecting an electric current at one electrode embedded in the bottom wall. This is a simplified representation of the experimental device presented in § 4.1, in which an array of four electrodes is used instead. To find the conditions for Alfvén waves to emerge and identify propagative and diffusive processes, the solution is sought both in the QSMHD and in the propagative low-RmRm approximations.

We first consider a single electrode, located at the centre of a cylindrical container of non-dimensional radius rer_e. In the actual experiment, the current is fully localised within the radius of the electrode (typically 0.5 mm) and drops abruptly outside it. Mathematically, this would impose a discontinuity in jw\mathbf{j}^{w}. To circumvent the numerical issues that would ensue, we therefore model the current injected at a single electrode located at r=0r = 0 by a sharp enough Gaussian distribution, on the basis that the impact of this change on the flow is limited, at least in the QSMHD limit [7],

jw(r)=1πr02exp⁡(−(r/r0)2)ez,(29)\mathbf{j}^{w}(r) = \frac{1}{\pi r_0^2}\exp\left(-(r/r_0)^2\right)\mathbf{e}_z, \tag*{(29)}

where r0=r~0/hr_0 = \tilde{r}_0/h is the dimensionless radius of the electrode. The polar frame of reference (er,eθ)(\mathbf{e}_r,\mathbf{e}_\theta) is centred on the electrode. Assuming that the magnetic perturbation is axisymmetric (∂θ=0\partial_\theta= 0) and the azimuthal magnetic perturbation vanishes at r=0r = 0, the Biot–Savart law yields the inhomogeneous Dirichlet boundary condition for the magnetic perturbation (Figure 2),

Image not extracted

Figure 2. Sketch of the axisymmetric geometry considered for a wave driven by injecting current with a single electrode. A cylindrical channel of radius rer_e closed by two horizontal, solid, impermeable and electrically insulating walls is filled with an electrically conducting incompressible fluid and subjected to a homogeneous, static and axial magnetic field B0=B0ez\mathbf{B}_0 = B_0\mathbf{e}_z. All distances are normalised by the height of the channel. An electrode of radius r0r_0 injecting a current I0I_0 is placed flush with the bottom wall. The bottom boundary conditions on the current density and the magnetic disturbances are both represented. The right-hand side shows the radial distribution of the axial current injected by the electrode and the left-hand side shows the distribution of the azimuthal magnetic perturbation induced by the axial current. The current injected by the electrode escapes radially at infinity through the side wall.

b~⊥(r,z=0,t)=bθw(r)cos⁡(t)eθ=(2π)−11−exp⁡(−r2/r02)rcos⁡(t)eθ.(30)\tilde{\mathbf{b}}_\perp(r,z=0,t)=b_\theta^w(r)\cos(t)\mathbf{e}_\theta=(2\pi)^{-1}\frac{1-\exp\left(-r^2/r_0^2\right)}{r}\cos(t)\mathbf{e}_\theta. \tag*{(30)}

In the general case, a similar condition u⊥(r,z=0,t)=uθw(r,z=0,t)eθ\mathbf{u}_\perp(r,z=0,t)=u_\theta^w(r,z=0,t)\mathbf{e}_\theta can be imposed on the velocity at the bottom wall to force the flow with a moving wall, as Lundquist [59] did experimentally. Here, for the purpose of modelling the experimental set-up (see § 4), both Hartmann walls are considered as fixed, impermeable, with no slip solid walls and the top wall is assumed electrically insulated,

u⊥(r,z=1,t)=u⊥(r,z=1,t)=0,b~⊥(r,z=1,t)=0.(31)\mathbf{u}_\perp(r,z=1,t)=\mathbf{u}_\perp(r,z=1,t)=0,\qquad\tilde{\mathbf{b}}_\perp(r,z=1,t)=0. \tag*{(31)}

Finally, the problem is closed with lateral boundary conditions that define the Sturm–Liouville problems (2.16-2.17). Since the upper wall is electrically insulated, we assume that the current injected at the electrode escapes radially at infinity [7]. Axisymmetry imposes that for re/r0≫1r_e/r_0 \gg1, jr∼r−1j_r \sim r^{-1} so the corresponding boundary condition for the Sturm–Liouville problem (16) is lim⁡r→∞jr=0\lim_{r\to\infty}j_r=0. However, since we solve the problem numerically, the boundary condition at infinity is approximated by one at finite radius re≫r0r_e \gg r_0. Axisymmetric solutions of the Sturm–Liouville problems (16) are Bessel functions of the first kind J1(κ⊥ir)J_1(\kappa_\perp^i r), where the transverse wavenumber κ⊥i\kappa_\perp^i is J1J_1’s iith root scaled by the dimensionless radius of the vessel rer_e.

Boundary conditions and general form of the solution

With these conditions in the horizontal plane, the general form for b~θ=b~⊥⋅eθ\tilde{b}_\theta=\tilde{\mathbf{b}}_\perp\cdot\mathbf{e}_\theta and uθ=u⊥⋅eθu_\theta=\mathbf{u}_\perp\cdot\mathbf{e}_\theta is

{uθ,b~θ}(r,z,t)=∑i=1N⊥{uθi,b~θi}(z,t)J1(κ⊥ir),(32)\{u_\theta,\tilde{b}_\theta\}(r,z,t)=\sum_{i=1}^{N_\perp}\{u_\theta^i,\tilde{b}_\theta^i\}(z,t)J_1(\kappa_\perp^i r), \tag*{(32)}

with

{uθi,b~θi}(z,t)={es1iz({U1i,B1i}cos⁡(t+κ1iz)−{U2i,B2i}sin⁡(t+κ1iz))+e−s1iz({U3i,B3i}cos⁡(t−κ1iz)−{U4i,B4i}sin⁡(t−κ1iz))+es2iz({U5i,B5i}cos⁡(t+κ2iz)−{U6i,B6i}sin⁡(t+κ2iz))+e−s2iz({U7i,B7i}cos⁡(t−κ2iz)−{U8i,B8i}sin⁡(t−κ2iz))},(33)\left\{u_{\theta}^{i},\widetilde{b}_{\theta}^{i}\right\}(z,t)=\left\{e^{s_{1}^{i}z}\left(\left\{U_{1}^{i},B_{1}^{i}\right\}\cos\left(t+\kappa_{1}^{i}z\right)-\left\{U_{2}^{i},B_{2}^{i}\right\}\sin\left(t+\kappa_{1}^{i}z\right)\right)+e^{-s_{1}^{i}z}\left(\left\{U_{3}^{i},B_{3}^{i}\right\}\cos\left(t-\kappa_{1}^{i}z\right)-\left\{U_{4}^{i},B_{4}^{i}\right\}\sin\left(t-\kappa_{1}^{i}z\right)\right)+e^{s_{2}^{i}z}\left(\left\{U_{5}^{i},B_{5}^{i}\right\}\cos\left(t+\kappa_{2}^{i}z\right)-\left\{U_{6}^{i},B_{6}^{i}\right\}\sin\left(t+\kappa_{2}^{i}z\right)\right)+e^{-s_{2}^{i}z}\left(\left\{U_{7}^{i},B_{7}^{i}\right\}\cos\left(t-\kappa_{2}^{i}z\right)-\left\{U_{8}^{i},B_{8}^{i}\right\}\sin\left(t-\kappa_{2}^{i}z\right)\right)\right\}, \tag*{(33)}

and where {κ1i,κ2i}\left\{\kappa_{1}^{i},\kappa_{2}^{i}\right\} and {s1i,s2i}\left\{s_{1}^{i},s_{2}^{i}\right\} are the wavenumbers and spatial attenuations associated with the transverse wavenumber κ⊥i\kappa_{\perp}^{i}, respectively. To obtain the solution, we calculate {κ1i,κ2i}\left\{\kappa_{1}^{i},\kappa_{2}^{i}\right\} and {s1i,s2i}\left\{s_{1}^{i},s_{2}^{i}\right\} with the appropriate dispersion relation: for the solution within the propagative low-RmRm approximation, we use Eq. (18), whereas for the solution within the QSMHD approximation, we use Eq. (28). Then, to find the real coefficients {Uli,Bli}l=1..8\left\{U_{l}^{i},B_{l}^{i}\right\}_{l=1..8}, we expand the boundary condition (30) as

bw(r,t)=∑i=1NL[2(reJ2(κ⊥ire))2∫0reζbθw(ζ)J1(κ⊥iζre) dζ]J1(κ⊥ir)cos⁡(t).(34)b_{w}(r,t)=\sum_{i=1}^{N_{L}}\left[\frac{2}{\left(r_{e}J_{2}\left(\kappa_{\perp}^{i}r_{e}\right)\right)^{2}}\int_{0}^{r_{e}}\zeta b_{\theta}^{w}(\zeta)J_{1}\left(\kappa_{\perp}^{i}\frac{\zeta}{r_{e}}\right)\,d\zeta\right]J_{1}\left(\kappa_{\perp}^{i}r\right)\cos(t). \tag*{(34)}

From the above equation, Bwi\mathbf{B}_{w}^{i} and Uwi\mathbf{U}_{w}^{i} are calculated for each transverse wavenumber κ⊥i\kappa_{\perp}^{i} so that they express the boundary conditions on the magnetic and velocity perturbations for each term of the Bessel–Fourier series,

Bwi=2(reJ2(κ⊥ire))2∫0reζbθw(ζ)J1(κ⊥iζre) dζ[1000]T,(35)\mathbf{B}_{w}^{i}=\frac{2}{\left(r_{e}J_{2}\left(\kappa_{\perp}^{i}r_{e}\right)\right)^{2}}\int_{0}^{r_{e}}\zeta b_{\theta}^{w}(\zeta)J_{1}\left(\kappa_{\perp}^{i}\frac{\zeta}{r_{e}}\right)\,d\zeta\begin{bmatrix}1 & 0 & 0 & 0\end{bmatrix}^{\mathrm{T}}, \tag*{(35)}

with

Uwi=[0000]T.(36)\mathbf{U}_{w}^{i}=\begin{bmatrix}0 & 0 & 0 & 0\end{bmatrix}^{\mathrm{T}}. \tag*{(36)}

The expressions of Uwi\mathbf{U}_{w}^{i} and Bwi\mathbf{B}_{w}^{i} can be easily adapted to reflect different types of electrical or mechanical forcing. For example, waves can be forced purely mechanically with an oscillatory rotation of electrically insulating top or bottom walls (or both), or electromagnetically as in the present study. Former experiments based on the generic geometry of an axisymmetric vessel subject to an axial magnetic field involve more complex types of forcing at the bottom wall: Lundquist [59] mechanically forced a wave, using a disk with radial strips at the bottom of the vessel. While the actuation was mechanical and modelled as such by Lundquist, it is possible that the fluid between the strips acted as a solid electrical conductor, whose motion induces electromagnetic forcing. Lehnert [56] indeed used such indirect magnetic forcing, by driving a copper disk in oscillatory rotation, thereby inducing an axial current. Whether electromagnetic or mechanical, both experiments would be modelled by a different radial distribution of velocity or magnetic field at the boundary than the one in the present study. In any case, the question of which boundary conditions best represent these two experiments remains one to clarify, as significant discrepancies exist between models and experiments in these papers.

Once the boundary conditions are set for each transverse wavenumber (3.7-3.8), the unknown coefficients {Uli,Bli}l=1..8\left\{U_{l}^{i},B_{l}^{i}\right\}_{l=1..8} are determined using the Navier–Stokes equation (12) and the Sturm–Liouville problem (2.16-2.17) (the expression of these coefficients is detailed in appendix A).

Finally, for the purpose of modelling the present experiment, where the flow is mapped through electric potential measurements at the Hartmann walls, we need theoretical expressions for these quantities. The electric field E\mathbf{E} and the electric potential gradient ∇ϕ\nabla\phi along the transverse directions can be deduced from the magnetic and velocity fields solutions. The radial electric field Er=E⋅erE_r = \mathbf{E} \cdot\mathbf{e}_r is directly obtained from uθu_\theta and bθb_\theta using Ohm’s law j=E+u×ez\mathbf{j} = \mathbf{E} + \mathbf{u} \times\mathbf{e}_z and Ampere’s law,

Er=−∂zb~θ−uθ,(37)E_r = -\partial_z \widetilde{b}_\theta- u_\theta, \tag*{(37)}

where the electric field is normalized by E0=σu0B0E_0 = \sigma u_0 B_0. The radial component of the potential gradient ∂rϕ=∇ϕ⋅er\partial_r \phi= \nabla\phi\cdot\mathbf{e}_r is calculated from ErE_r and from the magnetic vector potential A\mathbf{A}, where b=∇×A\mathbf{b} = \nabla\times\mathbf{A}. The radial component of A\mathbf{A} is first obtained using the Coulomb gauge ∇⋅A=0\nabla\cdot\mathbf{A} = 0:

Ar=Δ−1∂zb~θ,(38)A_r = \Delta^{-1}\partial_z\widetilde{b}_\theta, \tag*{(38)}

where Δ−1\Delta^{-1} is the inverse of the vector Laplacian operator. Thus, using the Faraday law and Eqs. (37)–(38),

∂rϕ=−Er−∂tAr=uθ+(∂z−∂tΔ−1∂z)b~θ.(39)\partial_r \phi= -E_r - \partial_t A_r = u_\theta+ \left(\partial_z - \partial_t\Delta^{-1}\partial_z\right)\widetilde{b}_\theta. \tag*{(39)}

Assuming the same form for ErE_r and ∂rϕ\partial_r\phi as for uθu_\theta, with corresponding coefficients Eli=1…8E_l^{i=1\ldots8} and Φli=1…8\Phi_l^{i=1\ldots8}, the solutions for ErE_r and ∂rϕ\partial_r\phi are determined using (37) and (39), respectively (see appendix B).

Quantities for flow diagnosis

Being now in a position to express solutions semianalytically, we define three quantities (represented schematically in Figure 3) to best characterise how oscillations imposed at the bottom wall propagate, damp and rotate across the layer, in both theory and experiments.

Image not extracted

Figure 3. Illustration of the different diagnosis quantities for the oscillating flow: the local phase shift φ(r,θ,z)=φ0(r,θ,z)−φ0(r,θ,z=0)\varphi(r,\theta,z) = \varphi_0(r,\theta,z) - \varphi_0(r,\theta,z=0); the local attenuation coefficient α(r,θ,z)=ln⁡∣∇rϕ(r,θ,z)∣/∣∇rϕ(r,θ,z=0)∣\alpha(r,\theta,z) = \ln\lvert\nabla_r\phi(r,\theta,z)\rvert/\lvert\nabla_r\phi(r,\theta,z=0)\rvert; the horizontal polar angle Θ(r,θ,z,t)\Theta(r,\theta,z,t) of the horizontal electric potential gradient ∇ϕ\nabla\phi.

(i) The local phase shift with respect to the bottom wall based on ∂rϕ\partial_r\phi, the electric potential gradients along er\mathbf{e}_r (or based on ∇ϕ⋅ex=∂xϕ\nabla\phi\cdot\mathbf{e}_x = \partial_x\phi, in Cartesian coordinates, in § 5),

φ(r,θ,z)=φ0(r,θ,z)−φ0(r,θ,z=0),(40)\varphi(r,\theta,z) = \varphi_0(r,\theta,z) - \varphi_0(r,\theta,z=0), \tag*{(40)}

where φ0(r,θ,z)=arg⁡{∫0tser⋅∇ϕ(r,θ,z,t)e−jt dt}\varphi_0(r,\theta,z)=\arg\left\{\int_0^{t_s}\boldsymbol{e}_r\cdot\nabla\phi(r,\theta,z,t)e^{-jt}\,\mathrm{d}t\right\} is the phase of ∂rϕ\partial_r\phi, obtained analytically, and tst_s is the duration of a time series.

(ii) The local attenuation coefficient based on ∂rϕ\partial_r\phi (or on ∂xϕ\partial_x\phi, in § 5),

α(r,θ,z)=ln⁡(∣∇rϕ^∣(r,θ,z)∣∇rϕ^∣(r,θ,z=0))(41)\alpha(r,\theta,z)=\ln\left(\frac{|\widehat{\nabla_r\phi}|(r,\theta,z)}{|\widehat{\nabla_r\phi}|(r,\theta,z=0)}\right) \tag*{(41)}

where ∣∇rϕ^∣(r,θ,z)=2∣∫0tser⋅∇ϕ(r,θ,z,t)e−jt dt∣|\widehat{\nabla_r\phi}|(r,\theta,z)=2\left|\int_0^{t_s}\boldsymbol{e}_r\cdot\nabla\phi(r,\theta,z,t)e^{-jt}\,\mathrm{d}t\right| is the amplitude of the oscillation of ∂rϕ\partial_r\phi at unit angular frequency (dimensionally ω\omega), also calculated analytically.

(iii) The horizontal polar angle Θ\Theta of ∇ϕ\nabla\phi with respect to the origin

Θ(r,θ,z,t)=−arctan⁡(sin⁡θ er⋅∇ϕ(r,θ,z,t)+cos⁡θ eθ⋅∇ϕ(r,θ,z,t)cos⁡θ er⋅∇ϕ(r,θ,z,t)−sin⁡θ eθ⋅∇ϕ(r,θ,z,t))(42)\Theta(r,\theta,z,t)=-\arctan\left(\frac{\sin\theta\,\boldsymbol{e}_r\cdot\nabla\phi(r,\theta,z,t)+\cos\theta\,\boldsymbol{e}_\theta\cdot\nabla\phi(r,\theta,z,t)}{\cos\theta\,\boldsymbol{e}_r\cdot\nabla\phi(r,\theta,z,t)-\sin\theta\,\boldsymbol{e}_\theta\cdot\nabla\phi(r,\theta,z,t)}\right) \tag*{(42)}

The first two quantities are defined so as to return the spatial attenuation and phase shift of a pure sinusoidal planar wave of the form exp⁡(αz)sin⁡(κz−ωt)\exp(\alpha z)\sin(\kappa z-\omega t). For axisymmetric flows, Θ\Theta reduces to θ\theta and thus is not of interest but will come in hand in §4 and §5, where the flow is forced with four electrodes and thus no longer axisymmetric.

Numerical solver

An in-house MATLAB code was developed to numerically solve the axisymmetric one-electrode problem, i.e. to evaluate time-dependent fields uθu_\theta, b~θ\tilde{b}_\theta, ∂rϕ\partial_r\phi and ErE_r on a discrete grid. The code first solves for sis_i, κzi\kappa_{z_i} in (19) and (20) and then solves the N⊥N_\perp systems of 16 equations (A 2–A 7) to determine coefficients UliU_l^i and BliB_l^i. Because ∣si∣|s_i| and κ1\kappa_1 scale with HaHa and appear as exponential arguments, the variable-precision arithmetic package in MATLAB was used to ensure a sufficient accuracy in computing the solutions, with the number of digits set to 320. The code takes as input RηR_\eta, RνR_\nu and HaHa, the radial location rr, the number of transverse modes N⊥N_\perp, the outer radius rer_e and the requested time interval for evolution.

The discretisation in time and in the zz direction are for display only and do not affect the precision of the result. Similarly the precision of the solution for each mode κ⊥i\kappa_\perp^i depends only on the numerical precision set. On the other hand, the approximation of the boundary condition from a Fourier–Bessel expansion leads to two errors: first, the finite number of modes in the series N⊥N_\perp incurs a discretisation error; second, an error on current conservation appears by setting boundary condition Jr=0J_r=0 at a finite radius rer_e instead of infinity. We assess both type of errors relative to a high resolution run at N⊥max⁡=2500N_\perp^{\max}=2500 for re={0.66,1.32,2.65}r_e=\{0.66,1.32,2.65\}, respectively, as

ε(re,Nκ⊥)=∥∂rϕ(Nκ⊥)−∂rϕ(Nκ⊥max⁡)∥∥∂rϕ(Nκ⊥max⁡)∥(43)\varepsilon(r_e,N_{\kappa_\perp})= \frac{\left\lVert\partial_r\phi(N_{\kappa_\perp})-\partial_r\phi(N_{\kappa_\perp}^{\max})\right\rVert} {\left\lVert\partial_r\phi(N_{\kappa_\perp}^{\max})\right\rVert} \tag*{(43)}

and

εb(re)=∥bw(r,t=0,re)−bθw∥∥bθw∥(44)\varepsilon_b(r_e)= \frac{\left\lVert b_w(r,t=0,r_e)-b_\theta^w\right\rVert} {\left\lVert b_\theta^w\right\rVert} \tag*{(44)}

where ∥⋅∥\lVert\cdot\rVert represents the L2\mathcal{L}^2 norm. Convergence tests performed with the propogative low-RmRm model show that εb∼re−2\varepsilon_b\sim r_e^{-2} for re≥0.6r_e\geq0.6 and ε≤10−10\varepsilon\leq10^{-10} when N⊥≥{400,800,1700}N_\perp\geq\{400,800,1700\} for re={0.66,1.32,2.65}r_e=\{0.66,1.32,2.65\}, respectively. Based on this result, a good compromise between numerical cost and precision is reached by setting rer_e and N⊥N_\perp so as to ensure εb≤1%\varepsilon_b\leq1\% on bwb_w for any rr, and ε≤10−10\varepsilon\leq10^{-10} for all forthcoming calculations. The same test is conducted on the QSMHD model, with similar results, so that forthcoming comparison between the two models is conducted with the same number of modes N⊥N_{\perp}.

Propagative resonance versus oscillating diffusive maxima

We first seek to identify the parameter regime where propagation occurs and the purely diffusive regime. To this end, we seek solutions of the one-electrode problem with both the propagative low-RmRm model and the QSMHD model that cannot produce waves for Ha∈{2.23,2.66,3.18,3.80}×104Ha \in\{2.23, 2.66, 3.18, 3.80\} \times10^{4} and Rη∈[4.3×10−5,5.1×101]R_{\eta} \in[4.3 \times10^{-5}, 5.1 \times10^{1}]. These values are chosen to match the experimentally accessible range. Waves are expected where discrepancies exist between the models. Figure 4 represents the variations of the attenuation coefficient α\alpha (r=0.1r = 0.1, z=1z = 1) with RηR_{\eta}, renormalised with two different parameters designed to highlight each of the two regimes. The first parameter Nω=Ha2/RνN_{\omega} = Ha^{2}/R_{\nu} represents the ratio between the

Image not extracted

Figure 4. Attenuation coefficient α\alpha against Nω−1N_{\omega}^{-1} (a) and JaJa (b) for Ha={1.9×104,2.66×104,3.18×104,3.8×104}Ha = \{1.9 \times10^{4}, 2.66 \times10^{4}, 3.18 \times10^{4}, 3.8 \times10^{4}\}: solid lines (—), propagative low-RmRm model; dashed lines (- - -), QSMHD model. Calculations are performed at r=0.1r = 0.1. The attenuation coefficient α\alpha is calculated at z=1z = 1.

Lorentz force and the acceleration term ∂tu\partial_t\mathbf{u}, present in both models. As such, it does not account for propagative phenomena. We call it the oscillation parameter by analogy with the interaction parameter that measures the ratio of Lorentz force to the inertial terms in QSMHD [64]. The solutions of the QSMHD and the propagative low-RmRm models collapse for all HaHa numbers in the limit Nω−1→0N_{\omega}^{-1} \to0 and exhibit a maximum at Nω−1=1×10−3N_{\omega}^{-1} = 1 \times10^{-3}. As such, this maximum does not stem from propagative phenomena. The solution of both models starts to diverge around this maximum (marked 1a–1d on Figure 4), with a relative error from 3% to 10% for 2.23×104≤Ha≤3.18×1042.23 \times10^{4} \leq Ha \leq3.18 \times10^{4}. The two models diverge significantly more around a second set of maxima (marked 2a–2d on Figure 4), which only exists in the propagative solution. Hence, this second set of maxima necessarily results from a propagative process. On Figure 4b, the attenuation coefficients are plotted against the Jameson number Ja=(RηRν)1/2/HaJa = (R_{\eta}R_{\nu})^{1/2}/Ha. All maxima from the second set (2a–2d) collapse at the same value of Ja=0.5Ja = 0.5, for all Hartmann numbers. Dimensionally, the period associated with these maxima therefore scales with the propagation time of AW across the channel and, thus, suggests a form of propagative resonance.

Both maxima correspond to a reduced attenuation of the oscillations across the channel: however, one is purely diffusive (henceforth referred to as oscillating diffusive), and the other one is due to Alfvén wave resonances (henceforth propagative). To understand the precise mechanism behind each of them, we now inspect the spatial distribution of the local amplitude ∣∇rϕ^∣\lvert\widehat{\nabla_r \phi}\rvert, the attenuation α(r,z)\alpha(r,z) and the phase φ(r,z)\varphi(r,z) of the electric potential gradients. Solutions from the QSMHD and propagative low-RmRm models are represented on Figure 5, Figure 6 and Figure 7 for different values of the Jameson numbers Ja=0.25Ja = 0.25 (Figure 5a,Figure 5e, Figure 6a,Figure 6e and Figure 7a,Figure 7e), 0.50.5 (Figure 5b,Figure 5f, Figure 6b,Figure 6f and Figure 7b,Figure 7f), 0.750.75 (Figure 5c,Figure 5g, Figure 6c,Figure 6g and Figure 7c,Figure 7g) and 11 (Figure 5d,Figure 5h, Figure 6d,Figure 6h and Figure 7d,Figure 7h).

Image not extracted

Figure 5. Contours of ∣∇rϕ^∣\lvert\widehat{\nabla_r \phi}\rvert at Ha=3.8×104Ha = 3.8 \times10^{4} and for Ja={(a,e) 0.25; (b,f) 0.5; (c,g) 0.75; (d,h) 1}Ja = \{(a,e)\ 0.25;\ (b,f)\ 0.5;\ (c,g)\ 0.75;\ (d,h)\ 1\}: (a−d)(a-d) propagative low-RmRm model; (e−h)(e-h) QSMHD model. The vertical dash–dotted line (−⋅−-\cdot-) is located at r=0.1r = 0.1 and the vertical dashed line (−−--) at r=0.4r = 0.4. The dotted line (⋯\cdots) shows the radial location rm(z)r_m(z) of the maximal velocity.

Image not extracted

Figure 6. Contours of α(r,z)\alpha(r,z) at Ha=3.8×104Ha = 3.8 \times10^{4} and for Ja={(a,e) 0.25;(b,f) 0.5;(c,g) 0.75;(d,h) 1}Ja = \{(a,e)\ 0.25; (b,f)\ 0.5; (c,g)\ 0.75; (d,h)\ 1\}: (a–d) propagative low–RmRm model; (e–h) QSMHD model. The vertical dash-dotted line (–·–), indicates the radial position r=0.1r = 0.1 where values of α\alpha are taken for Figure 4. The solid line (——) is the locus of α(r,z)=0\alpha(r,z) = 0.

Image not extracted

Figure 7. Contours of φ\varphi at Ha=3.8×104Ha = 3.8 \times10^{4} and for Ja={(a,e) 0.25;(b,f) 0.5;(c,g) 0.75;(d,h) 1}Ja = \{(a,e)\ 0.25; (b,f)\ 0.5; (c,g)\ 0.75; (d,h)\ 1\}: (a−d)(a-d) propagative low-RmRm model; (e−h)(e-h) QSMHD model. The solid line (——) marks the φ=0\varphi= 0 isovalue and the dotted line (····) the φ=−π\varphi= -\pi isovalue.

Phenomenology of the oscillating diffusive maxima

Understanding the mechanism underpinning the oscillating diffusive maxima requires a closer look at the region near r=0r = 0, where velocities are small. Since in the limit r→∞r \to\infty, u→0\mathbf{u} \to0, the flow reaches a maximum velocity at a radius rm(z)r_m(z) between the close and far regions, represented by a dotted yellow line on the contour plots of the amplitude of the electric potential gradients in Figure 5 and Figure 8. The fluid is accelerated in the region r≤rm(z)r \le r_m(z). In the limit Rν→0R_\nu\to0, this region is governed by the balance between viscous friction in horizontal planes and the Lorentz forces,

Image not extracted

Figure 8. Contours of ∣∇rϕ∣|\nabla_r \phi| from the QSMHD model at Ha=3.8×104Ha = 3.8 \times10^{4} and for Nω−1={(a) 0.75; (b) 1; (c) 1.25}×10−3N_{\omega}^{-1} = \{(a)\ 0.75;\ (b)\ 1;\ (c)\ 1.25\} \times10^{-3}. The dotted line (⋯\cdots) shows the radial location rm(z)r_m(z) of the maximal velocity.

νΔ⊥∼νHa2Δ∥−1∂zz2,(45)\nu\Delta_{\perp} \sim\nu Ha^{2}\Delta_{\parallel}^{-1}\partial_{zz}^{2}, \tag*{(45)}

which, for a lengthscale along zz scaling with zz, leads to the classical scaling for the thickness of vortex cores in high magnetic fields: r~m(ν)/h∼Ha−1/2(z~/h)1/2\tilde{r}_{m}^{(\nu)}/h \sim Ha^{-1/2}(\tilde{z}/h)^{1/2}. Crucially, the vortex core becomes thicker as the axial distance to the injection point increases [87, 70].

For RνR_{\nu} sufficiently large, the oscillating, acceleration term ∂tu\partial_t\boldsymbol{u} overcomes viscous friction to balance the Lorentz force and so r~m(ω)/h∼(Ha2/Rν)−1/2z~/h=Nω−1/2z~/h\tilde{r}_{m}^{(\omega)}/h \sim(Ha^{2}/R_{\nu})^{-1/2}\tilde{z}/h = N_{\omega}^{-1/2}\tilde{z}/h. The transition between these two regimes takes place when r~m(ω)∼r~m(ν)\tilde{r}_{m}^{(\omega)} \sim\tilde{r}_{m}^{(\nu)}, i.e. when Rν∼HaR_{\nu} \sim Ha at z~=h\tilde{z} = h. Since the oscillating diffusive maximum is located at Rν/Ha=HaNω−1≳10≫1R_{\nu}/Ha = HaN_{\omega}^{-1} \gtrsim10 \gg1 for all values of HaHa considered, it is well within the regime dominated by the acceleration term. The contour plots of ∣∇ ⁣rϕ∣|\nabla_{\!r}\phi| in Figure 8 obtained with the QSMHD model for Nω−1={0.75,1,1.25}×10−3N_{\omega}^{-1} = \{0.75, 1, 1.25\}\times10^{-3} illustrate the oscillating diffusive process at low Nω−1N_{\omega}^{-1}. In this regime too, the vortex core becomes wider at a larger distance from the electrode, as evidenced by the slanted contours of ∣∇r~ϕ∣\lvert\nabla_{\tilde r}\phi\rvert in Figure 5 and Figure 8. However, when zz reaches the axial wavelength of the oscillations 2π/κ2\pi/\kappa, the second derivative ∂zz\partial_{zz} saturates (at (κ~)2/(4π2)(\tilde{\kappa})^{2}/(4\pi^{2})) and so does the radius of the vortex core. This zz variation implies that for r~>r~m\tilde r > \tilde r_{\mathrm{m}}, the point r=r~/h=0.1r = \tilde r/h = 0.1 on the bottom wall is always in a region of lower amplitude oscillations than the point r=0.1r = 0.1 on the top wall. This can be seen as the r=0.1r = 0.1 line crosses an isovalue of ∣∇r~ϕ∣\lvert\nabla_{\tilde r}\phi\rvert in all examples at low Nω−1N_{\omega}^{-1}. r~m(ω)\tilde r_{\mathrm{m}}^{(\omega)} also depends on the forcing frequency. Here r~m(ω)\tilde r_{\mathrm{m}}^{(\omega)} becomes larger as RνR_{\nu} increases, i.e. as Nω−1N_{\omega}^{-1} increases. This is confirmed in Figure 8 where the yellow dotted line which highlights rm(ω)=r~m(ω)/hr_{\mathrm{m}}^{(\omega)} = \tilde r_{\mathrm{m}}^{(\omega)}/h along the vessel moves radially outwards as Nω−1N_{\omega}^{-1} increases. The two different dependences of r~m(ω)\tilde r_{\mathrm{m}}^{(\omega)} in the near- and far-region of the electrode incur a maximum in the ratio of amplitudes of the oscillations at the top and bottom walls at a given NωN_{\omega} value, Nω−1=1×10−3N_{\omega}^{-1} = 1 \times10^{-3} in the present study (illustrated in Figure 8b). This translates into the maximum observed when varying NωN_{\omega} whilst measuring the amplitude ratio at a fixed location.

Phenomenology of the propagative maxima

The propagative resonance is governed by the reflection of AW on the Hartmann walls, as each propagative resonance corresponds to values of RηR_{\eta} (or of the frequency) for which the wavelength lA=VA/2πωl_A = V_A/2\pi\omega is an integer fraction of the channel height hh or, equivalently, Ja={1/4,1/2,3/4,1...}Ja = \{1/4, 1/2, 3/4, 1...\}.

Far from the electrode, the radial velocity and potential gradients are small compared with the axial ones. This is made visible through the horizontal orientation of φ\varphi isolines as rr increases (Figure 7). In areas of low radial gradient, such as near r=0.4r = 0.4, propagative resonances appear at Ja={1/4,3/4}Ja = \{1/4, 3/4\} i.e., respectively, lA={h/4,3h/4}l_A = \{h/4, 3h/4\}. This is illustrated on Figure 9, which shows the variations of α\alpha with JaJa for two radial locations r={0.1,0.4}r = \{0.1, 0.4\} at Ha=3.8×104Ha = 3.8 \times10^{4}.

Image not extracted

Figure 9. Here α\alpha from the propagative low-RmRm model against JaJa for r={0.1,0.4}r = \{0.1, 0.4\} at Ha=3.8×104Ha = 3.8 \times10^{4}.

The maximum in α\alpha results from the coexistence of a minimum of ∣∇rϕ∣\lvert\nabla_{r}\phi\rvert at the bottom wall and a maximum at the top wall. This is also visible from the location of the node and antinode of ∣∇rϕ∣\lvert\nabla_{r}\phi\rvert, α\alpha and φ\varphi along the dashed line (— · —) r=0.4r = 0.4 in Figure 5(b, Figure 5c), Figure 6(b, Figure 6c) and Figure 7(b, Figure 7c), respectively. This case corresponds to theory and experiments by Jameson [47], whose resonances also appear at Ja=1/4Ja = 1/4 and 3/43/4, in our notations. Close to the electrode, by contrast, radial gradients increase significantly. Comparing the values of α\alpha at r=0.1r = 0.1 with those at r=0.4r = 0.4 in Figure 6 shows that the attenuation coefficient decreases in absolute value in this region. Hence, waves are more strongly damped in areas of higher transverse gradients, because of the extra Joule dissipation that these incur. In this region, e.g. at r=0.1r = 0.1, the propagative resonance appears at Ja=0.5Ja = 0.5 (marked 2a–2d on Figure 4b). Plots of φ\varphi against JaJa at r=0.1r = 0.1 for different values of HaHa on Figure 10 reveal that the phase shift between the two Hartmann walls is −π-\pi at this resonance. Thus, propagative resonances in strong radial gradients take place in phase opposition, which is confirmed by the two antinodes of ∣∇rϕ∣\lvert\nabla_{r}\phi\rvert located at the Hartmann walls for this JaJa value (see Figure 5b).

Image not extracted

Figure 10. Phase shift φ\varphi from the propagative low-RmRm model against JaJa at r=0.1r = 0.1 for Ha={1.9×104,2.66×104,3.18×104,3.8×104}Ha = \{1.9 \times10^{4}, 2.66 \times10^{4}, 3.18 \times10^{4}, 3.8 \times10^{4}\}. The dash–dotted line (— · —) φ\varphi is for an ideal unbounded wave.

Lastly, an ideal AW propagating between the Hartmann walls would incur a phase shift with a linear dependence on JaJa. From Figure 10, by contrast, φ\varphi exhibits a nonlinear dependence on JaJa. The discrepancy to linearity is particularly pronounced when Ja≲0.8Ja \lesssim0.8. This regime overlaps the regime of wave propagation for Ja≳0.1Ja \gtrsim0.1, so in this regime, dissipation causes AW to become dispersive. This effect, however, progressively vanishes at higher values of JaJa. Hence, in this limit, a nearly dispersionless propagative regime is recovered, despite the dissipation.

Experimental methods

The FlowCube experimental device

The experimental device is an upgraded version of the FlowCube facility ([50, 74, 9]). It consists of a modular cuboid vessel of inner height h=10h = 10 cm and width L=15L = 15 cm. The sidewalls are electrically insulated and made of polycarbonate. The top and bottom Hartmann walls in contact with the fluid are printed circuit boards made of an FR4 epoxy layer and a ROGER 4003 ceramic layer acting as an insulator, all mounted on polyamide-coated brass frame. Both are fitted with injection electrodes to drive the flow, and probes to measure electric potentials. The working liquid metal, hermetically enclosed inside the vessel, is a eutectic alloy of gallium, indium and tin that is liquid at room temperature, of electric conductivity σ=3.4×106\sigma= 3.4 \times10^{6} S/m, density ρ=6400\rho= 6400 kg m−3^{-3}, kinematic viscosity ν=3.7×10−7\nu= 3.7 \times10^{-7} m2^{2} s−1^{-1} (i.e. the magnetic Prandtl number is Pm=Rη/Rν=ν/η=1.6×10−6Pm = R_{\eta}/R_{\nu} = \nu/\eta= 1.6 \times10^{-6}). The procedures described in Baker et al. [9] ensure hermetic filling of the vessel and good electrical contact between the metal and both sets of probes and electrodes. FlowCube is subjected to a static and uniform axial magnetic field B0 ezB_{0}\,\mathbf{e}_{z} provided by the 12 MW M10 resistive electromagnet of 376 mm diameter bore at the LNCMI (CNRS) in Grenoble. The field homogeneity over the vessel is approximately 5%. The range of magnetic fields used B0={5.87,7,8.37,10}B_{0} = \{5.87, 7, 8.37, 10\} T corresponds to Hartmann numbers Ha={1.9×104,2.66×104,3.18×104,3.8×104}Ha = \{1.9 \times10^{4}, 2.66 \times10^{4}, 3.18 \times10^{4}, 3.8 \times10^{4}\}.

Flow forcing mechanism

As in Sommeria (1986), Klein et al. [51] and Baker et al. [9], the flow is driven by injecting a prescribed current through an array of electrodes fitted flush at the bottom Hartmann wall located at z=0z = 0. These are arranged on a 16×1616 \times16 square lattice spaced 5 mm apart and a ring lattice of height electrodes per side spaced 15 mm apart (Figure 11). Each of the electrodes is made of 1 mm diameter copper wire and surface-coated with a thin layer of gold to warrant the electrical contact with the liquid metal. An AC electric current is injected through a subset of these electrodes. In this paper, the corresponding forcing pattern is a near-central square of 2×22 \times2 electrodes spaced by d~0=0.02\tilde{d}_0 = 0.02 m (non-dimensionally, d0=d~0/h=0.2d_0 = \tilde{d}_0/h = 0.2), with adjacent electrodes of opposite polarities (Figure 11). The injected current is generated by a HP 33120A function generator feeding into two superimposed KEPCO 400 W BOP 20-20M amplifiers. It is sinusoidal, with a frequency range ω/(2π)∈[1,1330]\omega/(2\pi) \in[1, 1330] Hz corresponding to Rη∈[4.4×10−2,5.8×101]R_\eta\in[4.4 \times10^{-2}, 5.8 \times10^1]. Different root mean square (r.m.s.) current intensities ∣I0∣|I_0| per electrode were investigated, from 0.1 A to 6.5 A. To overcome current variations incurred by fluctuations in the contact resistance between metal and electrodes (of the order of 1×10−2Ω1 \times10^{-2}\Omega), a constant ohmic resistance of 2Ω±0.25%2\Omega\pm0.25\% is added in series to each electrode ([74]). Injecting AC current in this way drives an oscillatory flow of controlled frequency, amplitude, and transverse lengthscale given by the pitch d~0\tilde{d}_0 between electrodes.

Image not extracted

Figure 11. Sketch of the face of the bottom Hartmann wall in contact with the GaInSn alloy The injection pattern used during the experiments is represented coloured circles. The red circles are connected to the phase of the AC power supply and the blue ones to the neutral. The blue and red electrodes are in phase opposition. Tail circles represent active potential probes.

Measurement of electric potentials

The flow is diagnosed using two arrays of electric potential probes fitted flush at the surface of each Hartmann wall. They are arranged on a 2.5 mm lattice made of a central square of 14×1414 \times14 probes, and two perpendicular arrays of 4×484 \times48 probes spanning the xx and yy directions of the Hartmann walls (Figure 11). The arrays of both walls are aligned opposite each other along ez\mathbf{e}_z. Additionally, one of four potential probes located at the outer ring of the wall serves as reference for potential measurements. Each potential probe is made of 0.2 mm diameter copper wire touching the metal at the wall surface. From these potential probes, the electric signals are gathered through printed circuit boards embedded into the Hartmann walls and routed externally to two National Instrument PXIe-4303 data acquisition modules housed in a PXI express chassis clocked at 10 MHz. Each module synchronously records the signals of 32 probes to 24-bit precision at a sampling frequency fsf_s of up to 52.2 kHz per channel, with a low r.m.s. noise (3.2 μ\muV). Such high acquisition frequencies are required to accurately capture the different physical processes at play in the flow. The diffusive and propagative regimes of the Lorentz force act on respective time scales τ2D=(ρ/(σB02))(h/d0)2\tau_{2D} = (\rho/(\sigma B_0^2))(h/d_0)^2 and τA=h/VA\tau_A = h/V_A, so fs≫max⁡{τ2D−1,τA−1}f_s \gg\max\{\tau_{2D}^{-1},\tau_A^{-1}\} ensures that the both regimes can be captured. For instance, τ2D−1≃2\tau_{2D}^{-1} \simeq2 kHz and τA−1≃1\tau_A^{-1} \simeq1 kHz at the highest magnetic field of B0=10B_0 = 10 T, where both time scales are are smallest.

Measured Reynolds and magnetic Reynolds numbers

The theory developed in § 3.1 applies in the limit Re→0Re \to0 and Rm→0Rm \to0. Hence, we need to appraise the extent to which these assumptions are valid in the experimental regimes. The flow intensity depends a priori on I0I_0 and ω/(2π)\omega/(2\pi). In the QS limit, Rη→0R_\eta\to0. In this limit, and for Ha≫1Ha \gg1, Ha2/Re≫1Ha^2/Re \gg1, Eq. (6) is a good estimate for the actual flow velocity. As RηR_\eta increases, however, the high frequency shift in the forcing current prevents velocities from ever reaching this value. For this reason, u0u_0 and the control parameter Re0Re_0 significantly overestimate the actual velocities and Reynolds numbers.

Electric potential velocimetry offers a way to estimate at least the order of magnitude of the actual velocity: with this method, transverse potential gradients obtained from the electric potential signals provide an indirect measurement of the transverse velocity field for MHD experiments ([2, 50, 9] (Sommeria 1986)). Electric potential velocimetry relies on the property that for Ha≫1Ha \gg1 and

N≫1N \gg1, most of the current concentrates in the Hartmann layers, so in the bulk near these layers, J/σ=−∇ϕ+u⊥×B0ez≃0\mathbf{J}/\sigma= -\nabla\phi+ \mathbf{u}_\perp\times B_0\mathbf{e}_z \simeq0 (dimensionally). Since these layers are very thin, ϕ\phi has essentially the same value as its value at the wall ϕW\phi_W, so the velocity in the bulk can be obtained by measuring the electric potential gradient at the wall by u⊥≃B0−1ez×∇ϕW\mathbf{u}_\perp\simeq B_0^{-1}\mathbf{e}_z \times\nabla\phi_W, to a precision O(Ha,N−1)O(Ha,N^{-1}) [52]. However, while the ∂tA\partial_t\mathbf{A} in Ohm’s law is neglected in the limit of small frequencies, it becomes important in the experiments we consider here. Not accounting for it in the EPV method may incur an error of up to 45% for the highest frequencies we consider. Nevertheless, even with such an error, the values obtained by classical EPV return a reliable order of magnitude of the actual velocity for the purpose of estimating ReRe and RmRm. Hence, based on the EPV methodology, we build an estimate for the velocity from measurements using

U⊥(z)=B0−1((∥∇⊥ϕ∥−⟨∥∇⊥ϕ∥⟩x,y)2‾)1/2,(46)U_\perp(z)=B_0^{-1}\left(\overline{\left(\lVert\nabla_\perp\phi\rVert-\langle\lVert\nabla_\perp\phi\rVert\rangle_{x,y}\right)^2}\right)^{1/2}, \tag*{(46)}

where ⟨⋅⟩x,y\langle\cdot\rangle_{x,y} denotes the operator for spatial averaging in the (x,y)(x,y) plane, the overbar stands for time averaging and ∥∇⊥ϕ∥=[(∇ϕ⋅ex)2+(∇ϕ⋅ey)2]1/2\lVert\nabla_\perp\phi\rVert=[(\nabla\phi\cdot\mathbf{e}_x)^2+(\nabla\phi\cdot\mathbf{e}_y)^2]^{1/2} is the time value of the norm of the transverse potential gradient. From this velocity, we further define the Reynolds numbers and a magnetic Reynolds numbers at the top and bottom walls based on the flow intensity as Reutop/bot=U⊥top/botd~0/νRe_u^{\mathrm{top/bot}}=U_\perp^{\mathrm{top/bot}}\tilde d_0/\nu and Rmtop/bot=U⊥top/botd~0/ηRm^{\mathrm{top/bot}}=U_\perp^{\mathrm{top/bot}}\tilde d_0/\eta, respectively. The typical values of these parameters are reported in Table 1. With 10−6≤Rm≤10−210^{-6}\le Rm\le10^{-2}, the low-RmRm approximation is indeed better satisfied than in most low-RmRm laboratory experiments where 10−3≤Rm≤10−110^{-3}\le Rm\le10^{-1}. Reynolds numbers are also sufficiently low to ensure that nonlinear effects remain extremely small (see other low-RmRm studies for comparison Zikanov et al. [99] and Cassells et al. [17]).

5.8778.3710
B0B_0 [T]
ω/2π\omega/2\pi [Hz]
min1111
max78193311151330
I0I_0 [A]1.401.401.401.40
HaHa2.23×1042.23 \times10^42.66×1042.66 \times10^43.18×1043.18 \times10^43.80×1043.80 \times10^4
LuLu2.8×1012.8 \times10^13.3×1013.3 \times10^14.0×1014.0 \times10^14.8×1014.8 \times10^1
RηR_\eta min4.36×10−24.36 \times10^{-2}4.36×10−24.36 \times10^{-2}4.36×10−24.36 \times10^{-2}4.36×10−24.36 \times10^{-2}
max3.41×1013.41 \times10^14.07×1014.07 \times10^14.85×1014.85 \times10^15.79×1015.79 \times10^1
RνR_\nu min2.69×1052.69 \times10^52.69×1052.69 \times10^52.69×1052.69 \times10^52.69×1052.69 \times10^5
max2.10×1082.10 \times10^82.50×1082.50 \times10^82.99×1082.99 \times10^83.57×1083.57 \times10^8
Re0Re_01.33×1041.33 \times10^41.33×1041.33 \times10^41.33×1041.33 \times10^41.33×1041.33 \times10^4
ReubotRe_u^{\mathrm{bot}} min6.25×1016.25 \times10^15.50×1015.50 \times10^15.35×1015.35 \times10^15.13×1015.13 \times10^1
max2.96×1032.96 \times10^34.90×1034.90 \times10^35.94×1035.94 \times10^36.37×1036.37 \times10^3
ReutopRe_u^{\mathrm{top}} min1.791.722.413.95
max2.17×1032.17 \times10^33.88×1033.88 \times10^35.22×1035.22 \times10^35.50×1035.50 \times10^3
RmubotRm_u^{\mathrm{bot}} min1.02×10−41.02 \times10^{-4}8.94×10−58.94 \times10^{-5}8.69×10−58.69 \times10^{-5}8.33×10−58.33 \times10^{-5}
max4.80×10−34.80 \times10^{-3}8.00×10−38.00 \times10^{-3}9.70×10−39.70 \times10^{-3}1.03×10−21.03 \times10^{-2}
RmutopRm_u^{\mathrm{top}} min2.91×10−62.91 \times10^{-6}2.79×10−62.79 \times10^{-6}3.92×10−63.92 \times10^{-6}6.42×10−66.42 \times10^{-6}
max3.50×10−33.50 \times10^{-3}6.30×10−36.30 \times10^{-3}8.50×10−38.50 \times10^{-3}8.90×10−38.90 \times10^{-3}

Table 1. Range of control parameters and dimensionless numbers investigated in §§ § 5.2–§ 5.4. The table also shows the extrema values at the top and bottom walls for the measured Reynolds and magnetic Reynolds numbers.

Experimental procedure

The FlowCube offers four dimensional control parameters: the injection scale d~0\tilde{d}_0, the r.m.s. value of the electric current injected per electrode I0I_0; the magnitude of the magnetic field B0B_0; the frequency of the injected current ω/(2π)\omega/(2\pi). In this study, only the last three parameters were varied so as to independently control non-dimensional parameters Re0Re_0, HaHa and RηR_\eta (Pm=Rη/Rν=1.6×10−6Pm = R_\eta/R_\nu= 1.6 \times10^{-6} being set by fluid properties). While variations of RηR_\eta, HaHa and corresponding LuLu (all summarised in table 1) enable us to test the linear theory in § 3.1, I0I_0 and so Re0Re_0 were varied for the specific purpose of assessing the linearity of the wave forcing, and thereby the limits of the linear theory.

Measurements are performed at a constant magnetic field B0B_0, i.e. at constant HaHa. Starting from a flow at rest, the electric potentials are first recorded over 30s. Then the AC power supply is switched on at a set current angular frequency ω\omega and at a r.m.s. value per electrode of the current I0I_0. Then, electric potentials are recorded for 30s, to ensure a relative convergence error on ϕ\phi lower than 10−210^{-2} for all cases. The current supply is then switched off. The last three steps are repeated for different forcing frequencies to span different values of RηR_\eta and the whole procedure is repeated for different values of the magnetic field to span different values of HaHa.

Experimental results and four-electrode theoretical model

Methodology for the comparison between theory and experiment

To enable direct comparison between experimental data and the prediction of the propagative low-RmRm model, the latter is extended to the case of a four-electrodes configuration representing the experimental current injection pattern. Since the model is linear, this is done by translating the solution for one forcing electrode to the location of each of the four forcing electrodes and superimposing the four solutions so obtained, weighing them by the sign of the current they carry. The solution is then expressed in a common Cartesian frame whose origin is at the centre of the top left electrode of the injection pattern on Figure 11. In this frame, we use two attenuation coefficients and phase shifts defined in a similar way as in § 3.3: αx\alpha_x and φx\varphi_x are based on ∇ϕ⋅ex\nabla\phi\cdot\mathbf{e}_x while α\alpha and φ\varphi are based on ∥∇⊥ϕ∥\lVert\nabla_\perp\phi\rVert. Gradients of electric potential are evaluated by second-order central finite differences using signals from adjacent probes, so αx\alpha_x and φx\varphi_x require the signals of two probes while α\alpha and φ\varphi require four.

Oscillating diffusive regime versus propagative regime

To track the existence of the diffusive and propagative flow regimes identified in § 3.5, we first analyse how these quantities vary with the screen parameter RνR_\nu: Figure 12 and Figure 13 show αx(x=0.1,y=0.012,z=1)\alpha_x(x = 0.1, y = 0.012, z = 1) and φx(x=0.1,y=0.012,z=1)\varphi_x(x = 0.1, y = 0.012, z = 1) for both theory and experiments, plotted against JaJa and Nω−1N_\omega^{-1}. The variations of both αx\alpha_x and φx\varphi_x are very similar to those observed for the single-electrode model in § 3. The attenuation coefficient exhibits a plateau in the limit Nω−1→0N_\omega^{-1} \to0, a maximum around Nω−1=1×10−3N_\omega^{-1} = 1 \times10^{-3}, followed by a sharp decay at higher values, with a second peak in the higher frequencies. Similarly, the phase shift φx\varphi_x displays two distinct sequences of monotonic decay at low and high screen parameter RνR_\nu, which are qualitatively very similar to those observed for a single electrode. The collapse of both experimental and theoretical data into a single curve for Nω−1≲5×10−3N_\omega^{-1} \lesssim5 \times10^{-3} in Figure 12(a) and Figure 13(a) confirms that the variations of αx\alpha_x within this range reflect the spatial attenuation of diffusive oscillations. Similarly, the alignment of resonant peaks at

Image not extracted

Figure 12. Attenuation coefficient αx\alpha_x versus Nω−1N_\omega^{-1} (a) and JaJa (b) for Ha={1.9×104,2.66×104,3.18×104,3.8×104}Ha = \{1.9 \times10^4, 2.66 \times10^4, 3.18 \times10^4, 3.8 \times10^4\} and (x,y,z)=(0.1,0.012,1)(x,y,z) = (0.1,0.012,1). Solid lines and markers represent the propagative low-RmRm model and measurements respectively. White markers (▹\triangleright, □\square, ◃\triangleleft) highlight the cases at Ja=0.1Ja = 0.1, 0.50.5 and 11 respectively, all at Ha=3.8×104Ha = 3.8 \times10^4, studied in more detail on Figure 14, Figure 15 and Figure 16. In (b), the oscillating diffusive regime is represented by the white area and the propagative regime by the grey area. The hatched area depicts the range of JaJa values where nonlinearities are observed.

Image not extracted

Figure 13. Phase shift φx\varphi_x against Nω−1N_\omega^{-1} (a) and JaJa (b) for Ha={1.9×104,2.66×104,3.18×104,3.8×104}Ha = \{1.9 \times10^4, 2.66 \times10^4, 3.18 \times10^4, 3.8 \times10^4\} and at (x,y,z)=(0.1,0.012,1)(x,y,z) = (0.1,0.012,1). Solid lines and markers represent the propagative low-RmRm model and measurements respectively. The dash–dotted line (−-·−-) φx\varphi_x is for an ideal unbounded wave. White markers (▹\triangleright, □\square, ◃\triangleleft) highlight the cases at Ja=0.1Ja = 0.1, 0.50.5 and 11, respectively, all at Ha=3.8×104Ha = 3.8 \times10^4, studied in more detail on Figure 14, Figure 15 and Figure 16.

Ja=0.5Ja = 0.5 and 11 on Figure 12(b) is a clear signature of resonant waves characteristic of the propagative regime. This point is one of the main results of this work as it identifies both experimentally and theoretically the two parameters NωN_\omega and JaJa that, respectively, control the purely diffusive regime and the regime where MHD waves akin to AW can be electrically driven at low-magnetic Reynolds number, as well as the transition between these regimes.

The agreement between theory and experiment is generally excellent, but two distinct types of discrepancies deserve further comments. First, an offset separates the collapsed theoretical from the collapsed experimental values of αx\alpha_x (Figure 12) resulting in a ≃15%\simeq15\% difference in the value of the peak in the diffusive regime and ≃15%\simeq15\% in its position. For the propagative peaks, these discrepancies are, respectively, of ≃10%\simeq10\% and ≃3%\simeq3\%. However, the experimental data still shows excellent collapse in the diffusive regime and the propagative peak are all well aligned to Ja=0.5Ja = 0.5 and 11. Further calculations not reported here show that the actual value of αx\alpha_x is quite sensitive to the choice of distribution of injected current across the electrode jwj^w. While our simplified model of a Gaussian distribution (3.1) is numerically convenient and roughly reflects the localisation of the injected current at an electrode, it is very different from the complex distribution of current that occurs in the experiment as a result of the interaction between the liquid phase and the solid conductor that forms the electrode ([38]). Hence, this offset can be attributed to our simplified model of the current distribution and we argue that this minor difference does not detract from the excellent agreement between the physical mechanisms taking place in FlowCube and those captured by the model.

The second discrepancy takes place in the high RνR_\nu limit, within the propagative regime: for Ja>0.85Ja > 0.85, both the attenuation and phase shift depart significantly in value and in behaviour from the model. The excellent agreement between theory and model elsewhere suggests that the model misses a physical mechanism in this regime. Since waves propagate more freely in this regime, they reach higher amplitudes and may thus interact nonlinearly, a process that the linear model cannot capture and that is discussed further in the next sections.

Linear and nonlinear flow patterns

Having identified the diffusive and propagative regimes in the experimental data, we now seek to understand the discrepancy between theory and experiments at high values of the Jameson number. To this end, the topology of the flow is investigated using the angle between the potential gradients and ex\boldsymbol{e}_x at the Hartmann walls, Θ(z=0)\Theta(z = 0) and Θ(z=1)\Theta(z = 1). This quantity has the advantage of ignoring the amplitude of the potential gradient and so reflects solely the topology of the flow. We focus on three different cases: one in the oscillating diffusive regime, one well captured by the model within the propagative regime and one within the propagative regime but with significant discrepancy between model and experiment. We set Ha=3.8×104Ha = 3.8 \times10^{4} for all three cases corresponding to Ja={0.1,0.5,1}Ja = \{0.1, 0.5, 1\}, respectively. These cases are highlighted by three different white-filled symbols in Figure 12 and Figure 13. Instantaneous experimental and theoretical contours of Θ\Theta at the top and bottom walls (z=0z = 0 and z=1z = 1) are plotted in Figure 14 for all three cases.

Image not extracted

Figure 14. Snapshot contours of Θ\Theta for Ja=0.1J_a = 0.1 (aa), Ja=0.5J_a = 0.5 (bb) and Ja=1J_a = 1 (cc). Here Ha=3.8×104H_a = 3.8 \times10^{4} for all cases. For each value of JaJ_a, instantaneous contours of Θ\Theta are plotted at the top wall (i,ii) and at the bottom wall (iii,iv), from experimental data (i,iii) and from the propagative low-RmR_m model (ii,iv). The full coloured circles show the location of two of the four injection electrodes – in phase opposition – while the empty circles show their virtual projection on the top wall. The yellow stars and the square highlight the focus points and the saddle respectively. The time considered for snapshots is arbitrary. However, other times give similar results.

For Ja=0.1Ja = 0.1 and 0.50.5 (Figure 14(a) and Figure 14(b)), isolines of Θ\Theta from experiments are topologically consistent with those from the model. The main difference is that positive isovalues of Θ\Theta swell slightly towards the positive xx-direction in the experimental data at Ja=0.5Ja = 0.5. While this could be due to nonlinearities, the limited spatial resolution in the experiments and the added uncertainty of comparing instantaneous snapshots make it difficult to reach a definite conclusion regarding the origin of this effect based on these snapshots alone.

For Ja=1Ja = 1, the experimental contours of Θ\Theta are consistent with theory at the bottom wall z=0z = 0. At the top wall z=1z = 1, by contrast, two focus points and at least one saddle appear at (x,y)=(0.38,−0.14)(x,y) = (0.38,-0.14), (x,y)=(0.48,−0.11)(x,y) = (0.48,-0.11) and (x,y)=(0.62,−0.03)(x,y) = (0.62,-0.03), respectively (Figure 14(c)). Further critical points must exist on the top wall to satisfy the topological constraints on their numbers ([45]) but these fall outside of the spatial visualisation window available to us. Because of these, the topology found in the experimental data differs fundamentally from that predicted by the model. This new topological structure is not compatible with the linear prediction, and implies an underpinning nonlinear mechanism. Furthermore, the two focus points are located in the region of the isoline swelling observed

for the case Ja=0.5Ja = 0.5, suggesting that the topological change may ensue from small nonlinear deviations to the linear prediction at lower values of JaJa. This also suggests that nonlinearities are favoured at higher values of JaJa and especially near the resonance Ja=1Ja = 1, i.e. further into the propagative regime, and where the amplitude of the waves is greatest. These conditions are most favourable to the occurrence of nonlinearities and the resonance points to a JaJa nonlinear self-interaction of the wave. Generally speaking, nonlinearities may potentially arise out of nonlinear wave interaction but also from hydrodynamic instabilities of the oscillating flow not involving wave interaction: instabilities of forced electromechanical oscillations were indeed observed, but at Ha<10Ha < 10, i.e. outside of the propagative regime of relevance here [90]. Here, however, the values of the measured Reynolds number at the bottom wall Rebot={199,102,75}Re^{\mathrm{bot}} = \{199, 102, 75\} and at the top wall Retop={48,8,8}Re^{\mathrm{top}} = \{48, 8, 8\} for Ja={0.1,0.5,1}Ja = \{0.1, 0.5, 1\}, respectively, are very low. Furthermore, the strongest changes on the flow topology are observed at the top wall for Ja=1Ja = 1, which is where the value of ReRe is the lowest. Hence, hydrodynamic instabilities are unlikely to be the cause of the instabilities.

In any case, this change in topology corresponds to the discrepancy observed on § 5.2 for Ja>0.85Ja > 0.85 and so confirms that these discrepancies reflect a nonlinear regime of AW, not accounted for in the model.

Influence of horizontal gradients on the diffusion of oscillations and wave propagation

A key result of the theoretical study in § 3.5 was that both the diffusion of oscillations and wave propagation are influenced by the transverse gradients of electric potential. We shall now track and quantify this effect experimentally. The measurements in FlowCube deliver attenuation and phase shifts between the Hartmann walls (z=0z = 0 and z=1z = 1) only. Hence, we plot the experimental and theoretical contours of these quantities, α(x,y,z=1)\alpha(x, y, z = 1) and φx(x,y,z=1)\varphi_x(x, y, z = 1), on Figure 15 and Figure 16, respectively, again focusing on the value of HaHa displaying the most prominent wave propagation at high JaJa, i.e. Ha=3.8×104Ha = 3.8 \times10^4 and for Ja∈{0.1,0.5,1}Ja \in\{0.1, 0.5, 1\}.

Image not extracted

Figure 15. Snapshot contours of α\alpha at the top wall (z=1z = 1) for Ja=0.1Ja = 0.1 (aa, bb), Ja=0.5Ja = 0.5 (cc, dd) and Ja=1Ja = 1 (ee, ff). Here Ha=3.8×104Ha = 3.8 \times10^{4} for all cases. For each value of JaJa, contours of Θ\Theta are plotted from experimental data (aa, cc, ee) and from the propagative low-RmR_m model (bb, dd, ff). The coloured circles show the location of two electrodes in phase opposition out of the four injection electrodes.

Image not extracted

Figure 16. Snapshot contours of φx\varphi_x at the top wall (z=1z = 1) for Ja=0.1Ja = 0.1 (a,ba, b), Ja=0.5Ja = 0.5 (c,dc, d) and Ja=1Ja = 1 (e,fe, f). Here Ha=3.8×104Ha = 3.8 \times10^4 for all cases. For each value of JaJa, the contours of Θ\Theta are plotted from experimental data (a,c,ea, c, e) and from the propagative low-RmRm model (b,d,fb, d, f). The coloured circles show the location of two electrodes in phase opposition out of the four injection electrodes.

Experimental contours of α\alpha and φx\varphi_x exhibit topologically equivalent patterns to their theoretical counterparts except for Ja=1Ja = 1 (within the same limitations on the spatial resolution in the experiment and the error incurred by comparing snapshots as in the previous section). The gradients of these quantities visibly decrease with the distance to the neighbouring electrode in all cases but the experimental one at Ja=1Ja = 1 too. The value of α\alpha itself (Figure 15) increases with the transverse distance form each electrode, both in the oscillating diffusive regime (Figure 15a-Figure 15b) and in the linear propagative regime (Figure 15c-Figure 15f) in both theory and experiment. Experimental contours of φx\varphi_x are consistent with the model for Ja=0.1Ja = 0.1 and 0.5 (Figure 16). In both cases, the magnitude of φx\varphi_x increases with the distance to the neighbouring electrode. These observations concur to show that the high transverse gradients in the vicinity of the electrodes increase the attenuation of the oscillations but accelerate their diffusion and their propagation along ez\mathbf{e}_z.

For Ja=1Ja = 1, the experimental contours of both α\alpha and φx\varphi_x deviate from the model. This case, highlighted by marker ⊲\lhd on Figure 12 and Figure 13, corresponds to the regime where nonlinear wave interactions incur a change in the flow topology at the top wall (Figure 14c), a phenomenon that the linear theory cannot capture. In the experimental data, the locus of the emerging nonlinear pattern coincides with a locally enhanced phase shift compared with the model, indicating that the nonlinear pattern travels along ez\mathbf{e}_z at a different velocity from the fundamental mode driven by the forcing.

To further quantify the dependence of the attenuation and phase shift on the horizontal gradients of electric potential, we take advantage of the near-monotonic dependence of these gradients on the transverse distance to the nearest electrode in the (x,y)(x,y) plane, which we denote r∗r^*. Based on this, the lengthscale of transverse gradients can be approximated by r∗r^*. We focus on the linear propagative regime where experiments and theory agree well, e.g. Ja=0.5Ja = 0.5. Figure 17 and Figure 18, respectively, show the variations of α\alpha and ∣φx∣|\varphi_x| with r∗r^* from the experiment and the model. Since these fields are not axisymmetric about either of the electrodes, these variations also depend on the azimuthal angle with respect to the closest electrode, especially for points that are nearly equidistant from two electrodes. The theoretical range of variation of α\alpha and φx\varphi_x spanned in this way is represented on the figures by a red zone. The experimental data shows a greater spread attributed to the local measurement error, of around 4%, and to the offset in damping rate incurred by our simplified model of the current distribution at the electrode (see § 5.2). Nevertheless, the experimental values of α\alpha are consistent with the model. In both cases, α\alpha increases with r∗r^*. These variations do not appear to follow a simple scaling law. Indeed, the values of r∗r^* fall in an intermediate range between the regime of low transverse gradient investigated by Jameson [47] and a regime of much higher transverse gradient where waves are highly damped. In the high damping regime, horizontal gradients are sufficiently strong to incur magnetic dissipation comparable to the axial ones, and so considerably increase the damping of oscillations along ez\mathbf{e}_z. This phenomenon takes place in the deep blue area very close to the electrode in Figure 6(c). The vertical contours of α\alpha obtained from the single electrode theory show that this region extends over the entire height of the vessel. In the QSMHD limit, this region becomes the classical viscous vortex core of inertialess thickness ∼Ha1/2\sim Ha^{1/2} studied in detail by Sommeria [87].

Figure 17. Here α\alpha versus r∗r^* for Ja=0.5Ja = 0.5 and Ha=3.8×104Ha = 3.8 \times10^4. Here r∗r^* is the distance in the (x,y)(x,y) plane between a given measurement location and the nearest injection electrode. The solid line and markers correspond to the propagative low-RmRm model and measurements, respectively. The error bars show the local measurements errors for α\alpha, of 4%.

Image not extracted

Figure 18. Here φx\varphi_x against r∗r^* for Ja=0.5Ja = 0.5 and Ha=3.8×104Ha = 3.8 \times10^4. Here r∗r^* is the distance in the (x,y)(x,y) plane between a given measurement location and the nearest injection electrode. The solid line and the light red coloured area represent the solution of the propagative low-RmR_m model while markers show measurements.

Similarly, the magnitude of the phase shift φx\varphi_x increases with r∗r^* in both experiment and model, without following any obvious scaling law (Figure 18). It should also be noticed that the experimental data is more scattered for ∣φx∣|\varphi_x| than for α\alpha. The scattering can be attributed to the to several factors: first, using a single component of the potential gradient φx\varphi_x incurs errors when the gradient is close to normal to ex\mathbf{e}_x; second, the most scattered points fall mostly in the region where discrepancies in flow topologies were observed between theory and experiment. This suggests that the scattering may arise out of nonlinear effects.

The variations of α\alpha and φ\varphi quantify the previous observation that stronger transverse gradients damp the waves whilst accelerating their propagation. Additionally, they show that the dissipative waves observed in FlowCube sit at an intermediate regime of dissipation. As such, less dissipative waves may be obtained in a different geometry minimising the transverse gradient. As Jameson [47] carefully positioned his measurement probe specifically to target this range. In doing so, he maximised the intensity of the waves he was able to observe within the physical limitations of his experiment and despite the relatively low magnetic field available to him. The quality of the results he obtained in this manner, compared with other experiments available in these times [59, 11, 56, 4] is a tribute to his deep understanding of the subtleties of these waves.

Linearity and nonlinearity of the experimental waves

The discrepancies between model and experiment at high Jameson numbers (Ja≳0.85Ja \gtrsim0.85) in § 5.2 revealed significant nonlinearities in this regime. Smaller discrepancies between theoretical and experimental contours of the potential gradient angle further suggest that these nonlinearities develop at lower Jameson numbers (Ja≃0.5Ja \simeq0.5). Hence, notwithstanding the otherwise excellent agreement between theory and experiment, the question arises of which range of control parameters sees these nonlinearities affect either the oscillating diffusive regime or the propagative one. In particular, how much of the experimental data may fall within this regime? To answer these questions, we assess the linearity of electric potential gradients with respect to the forcing intensity. Dimensionally, the forcing intensity is controlled by the total current injected in the flow, and non-dimensionally, it is measured by Re0Re_0. Nonlinearities are assessed using the average intensity of the electric potential gradients, and their relative nonlinearity is defined as

ϵNL(z)=∣1−⟨∣∇xϕ^(Re0)∣⟩x,yRe0lim⁡Re0→0Re0⟨∣∇xϕ^(Re0)∣⟩x,y∣(47)\epsilon_{\mathrm{NL}}(z)=\left|1-\frac{\left\langle\left|\nabla_x\widehat{\phi}(Re_0)\right|\right\rangle_{x,y}}{Re_0}\lim_{Re_0\to0}\frac{Re_0}{\left\langle\left|\nabla_x\widehat{\phi}(Re_0)\right|\right\rangle_{x,y}}\right| \tag*{(47)}

where ∣∇xϕ^∣|\nabla_x\widehat{\phi}| refers to the amplitude of the oscillations of ∂xϕ\partial_x\phi. The quantity ϵNL(z)\epsilon_{\mathrm{NL}}(z) can be understood as the relative discrepancy averaged at either wall (z=0z = 0, or z=1z = 1) between the measured electric potential gradients at a finite Re0Re_0 and their value expected from linear upscaling of measurements made in the linear limit Re0→0Re_0 \to0. Hence, for flows purely within the linear regime, ϵNL=0\epsilon_{\mathrm{NL}} = 0. To assess this quantity, the purely linear solution in the limit Re0→0Re_0 \to0 is approximated by the experimental data obtained at the lowest value of Re0Re_0, i.e. Re0=3.75×103Re_0 = 3.75 \times10^3 (for which Rebot=30.0Re_{\mathrm{bot}} = 30.0 and Retop=7.7Re_{\mathrm{top}} = 7.7 at Ja=0.1Ja = 0.1 and Ha=3.8×104Ha = 3.8 \times10^4). The relative nonlinearity of the potential gradient ϵNL\epsilon_{\mathrm{NL}} is plotted at the bottom and top walls for Ha={3.18×104,3.8×104}Ha = \{3.18 \times10^4, 3.8 \times10^4\} and Ja={0.1,0.5,1}Ja = \{0.1, 0.5, 1\} (Figure 19). In all cases, ϵNL\epsilon_{\mathrm{NL}} smoothly increases with Re0Re_0. Thus, nonlinearities are always present, albeit in a vanishingly small amount in the limit Re0→0Re_0 \to0. This concurs with the observation of small discrepancies in the contours of the angle of electric potential gradients Θ\Theta (Figure 14b-Figure 14c), even in regimes where theoretical values of both the attenuation coefficient and phase shift agree well with the experimental ones.

Figure 19. Normalised ∣∇xϕ∣\lvert\nabla_{x}\phi\rvert against Re0Re_0 at the top wall (a) and the bottom wall (b) for Ha={3.18×104,3.8×104}Ha = \{3.18 \times10^{4}, 3.8 \times10^{4}\} and Ja={0.1,0.5,1}Ja = \{0.1, 0.5, 1\}. For each case of the set {Ha,Ja}\{Ha, Ja\}, ∣∇xϕ∣\lvert\nabla_{x}\phi\rvert is normalised by its value at the lowest experimental Re0Re_0.

At the bottom wall, ϵNL\epsilon_{\mathrm{NL}} remains below 6% for all cases (Figure 19b). A saturation in the variations of ϵNL(Re0)\epsilon_{\mathrm{NL}}(Re_0), however, takes place around Re0≃2×104Re_0 \simeq2 \times10^4, and only in the propagative regime Ja≳0.5Ja \gtrsim0.5 (for Ha=3.8×104Ha = 3.8 \times10^4, Ja=0.5Ja = 0.5 and Ha=3.8×104Ha = 3.8 \times10^4, Ja=1Ja = 1; Figure 19b). This is indicative of a change in nonlinear dynamics with a possible dominance of nonlinear wave interaction. By contrast, flows within the diffusive regime remain essentially linear for the entire range of forcing spanned within the experiment. Data at the top wall (Figure 19a) reveal the same phenomenology but with significantly greater nonlinearity, up to ≃40%\simeq40\%. This also concurs with the observations of the contours of Θ\Theta, where the discrepancy between theory and experiment was found greater at the smallest ReRe and at the largest JaJa values, near the top wall. This further supports the idea that nonlinearities arise from nonlinear wave interactions rather than from other hydrodynamics instabilities. Indeed, these interactions are impeded near the bottom wall where patterns of injected current are imposed. However, they grow as they propagate away from the forcing region, and so are more likely observed near the top wall.

Except for the present section, all experimental data shown in this work was obtained for Re0=1.33×104Re_0 = 1.33 \times10^4 (highlighted with dashed lines on Figure 19a and Figure 19b). For this forcing intensity, ϵNL\epsilon_{\mathrm{NL}} remains lower than ≃12%\simeq12\% for all cases but Ha=3.8×104Ha = 3.8 \times10^4, Ja=1Ja = 1. Hence, it can be concluded that the phenomenology discussed throughout this work is linear in all regimes where experiment and theory agree. Nevertheless, the data at higher Re0Re_0 discussed in this section clearly shows that nonlinear regimes are easily reached within FlowCube’s operational range of parameters.

Conclusion

We studied an electrically driven oscillating flow confined between two walls perpendicular to an externally imposed magnetic field, in order to identify the conditions in which diffusive, propagative and nonlinear processes occur in low-RmRm MHD. The underlying question at stake is whether AW observed in astrophysical and geophysical systems can be studied in detail in laboratory-scale experiments using liquid metals. To address this problem, we developed two linear models, one based on a propagative extension of the usual low-RmRm MHD approximation, and one based on the QSMHD approximation. We also adapted the FlowCube experimental device [50] to directly track these regimes in a rectangular vessel filled with liquid metal. The propagative low-RmRm approximation differs from the usual QSMHD approximation in that the time scale of local oscillations of momentum and induced magnetic field is different from the flow turnover time. It is therefore governed by three non-dimensional parameters: the usual Hartmann number Ha=Bh(σ/(ρν))1/2Ha = Bh(\sigma/(\rho\nu))^{1/2} and two screen parameters, a viscous one, Rν=ωh2/(2πν)R_{\nu} = \omega h^{2}/(2\pi\nu) and a resistive one Rη=ωh2/(2πη)R_{\eta} = \omega h^{2}/(2\pi\eta). The linearised QSMHD approximation is recovered in the limit Rη→0R_{\eta} \to0, keeping RνR_{\nu} finite. This

approach enabled us to keep the induction time scale as a free parameter and so cover the full range of regimes where diffusion and propagation compete. This range can be mapped to other problems where the induction time scale is controlled by other processes such as advection or convection, and so offers a general framework for Alfvén waves at low magnetic Reynolds number.

Combining theory and experiments enabled us to identify and characterise three different regimes of forced oscillations. The first regime falls within the QSMHD approximation. It is captured by both linear models and experiments and occurs at low screen parameters RνR_\nu or RηR_\eta. In this regime, the Lorentz force acts exclusively so as to diffuse momentum along magnetic field lines. In the limit Rη→0R_\eta\to0, this diffusion process drives flows towards a quasi-two-dimensional state ([88]). Hence, we called this regime oscillating diffusive, and found that it is characterised by an oscillating parameter Nω=2πσB02/ρωN_\omega= 2\pi\sigma B_0^2/\rho\omega built out of the ratio of the oscillating acceleration time scale 2π/ω2\pi/\omega to the two-dimensionalisation time scale at the scale of the box associated with the Lorentz force, τ2D=ρ/(σB02)\tau_{2D} = \rho/(\sigma B_0^2), first introduced by [88]. The second regime occurs at higher values of RηR_\eta. It is captured by experiments in excellent agreement with the linear propagative low-RmRm model, but not by the QSMHD model. This linear propagative regime is dominated by the propagation of AW. Their resonance across the channel occurs at values of RηR_\eta such that the ratio between the propagation time of Alfvén waves across the channel and the oscillation period is either 1/4, 1/2, 3/4 or 1. The second regime is characterised by values of this ratio, which we named the Jameson number Ja=ωh/(2πVA)Ja = \omega h/(2\pi V_A) below ≃0.85\simeq0.85. The existence of this regime is one of the chief results of this study as it identifies the regime in which MHD waves akin to AW, but different from ideal AW first theorised by Alfvén ([3]), can propagate at low RmRm. The third regime occurs at the highest values of RνR_\nu, corresponding to Ja≳0.85Ja \gtrsim0.85 and therefore remains propagative in nature. It emerges where wave amplitudes are too high for the linear model to remain valid (most noticeably near the resonance Ja=1Ja = 1). Indeed, experimental data departs from the linear model, and displays a clear nonlinear behaviour. Hence, we name this regime the nonlinear propagative regime.

The particular type of AW we found in the propagative regime, further exhibits unique propagation properties so far unobserved at low-RmRm. In the linear propagative regime, both the model and the experimental data display a dependence of the phase velocity on RηR_\eta, so unlike ideal AW, these waves are dispersive. Furthermore, the configuration involves a spatially inhomogeneous forcing in the planes perpendicular to the magnetic field with electric potential gradients decaying away from the points of current injection. This provided us with an opportunity to analyse how such an inhomogeneity affects wave propagation. Indeed, both model and experiment clearly show that the propagation of these dispersive AW depends on the transverse gradients: AW are indeed both locally accelerated and more strongly damped in stronger gradients. Such variations of propagation velocity, never observed before at low-RmRm, are sometimes referred to as phase mixing. It locally increases the viscous and resistive wave dissipation responsible for a heating process that may explain the anomalous temperature in the Sun’s corona ([39, 62, 76]).

Outside the linear propagative regime, nonlinearities manifest themselves in several ways. First, contour maps of electric potential reveal a change in the flow topology, noticeable near the top Hartmann wall, i.e. farther away from the forcing point. This, together with the occurrence near a resonance of these nonlinearities, support the hypothesis of nonlinear self-interaction of AW. Additionally, varying the forcing intensity expressed by Reynolds number Re0Re_0 for different values of JaJa shows a stronger departure from the linear model at higher amplitudes, another signature of nonlinearity. The discrepancy from linearity was further found to increase continuously from very small Re0Re_0 and so suggests that nonlinearities are always present, rather than ignited near a bifurcation as the forcing amplitude increases. The presence of nonlinearities driven by wave self-interaction is another major result and so answers one of the key questions that motivated this work: nonlinear energy transfers driven by waves can be reproduced in liquid metal experiments. This opens new possibilities for the study of a second mechanism directly relevant to processes expected to take place in astrophysical systems, especially the solar corona [40] (Davila 1987).

The three regimes found in this work show that three key ingredients of astrophysical and geophysical AW can be reproduced in a small-scale experiment: diffusion, propagation and nonlinearity. Additionally, we have been able to characterise the inhomogeneous properties of dispersive AW, another key feature of the complex dynamics of AW in these systems. These results open a new spectrum of opportunities to model such practically inaccessible objects as planetary interiors or the solar corona in the relative comfort of a small-scale laboratory, using liquid metals. The AW in solar plasma or solar wind are unlikely to be fully reproduced in liquid metal experiments so we are certainly a very long way from bringing the physics of the Sun into a box filled with liquid metal. But we are almost an equally long way from having exhausted the possibilities offered by the increasingly high intensity of magnetic fields available to liquid metal experiments, and the flexibility offered by electrically driven AW: varying the forcing intensity, the forcing geometry, the shape size of the box offer as many opportunities to seek more intense nonlinearities, different types of inhomogeneities and of nonlinear effects. Each of these may hold the key to some aspects of how AW behave in the Sun or in planetary interiors.

Acknowledgement The authors are grateful to the European Magnetic Field Laboratory (EMFL) and the Laboratoire des Champs Magnetiques Intenses-Grenoble (LNCMI-Grenoble, part of theFrench CNRS) for providing us and for supporting access to their unique magnets with high magnetic field in sufficiently large bores to conduct fluid mechanics experiments.

Funding. The authors would also like to thank the IDEX of Université Grenoble Alpes for its substantial contribution to the funding of Samy LALLOZ’s doctoral scholarship through the International Strategic Partnerships (ISP) program. The SIMAP laboratory is part of the LabEx Tec 21 (Investissements d’Avenir, Grant Agreement No. ANR-11-LABX-0030). The UK Subscription to EMFL for access to the magnets at LNCMI-Grenoble is funded by EPSRC grant NS/A0000060/1.

Author ORCIDs

Samy Lalloz https://orcid.org/0009-0001-5142-1302,

François Debray https://orcid.org/0000-0002-7214-6821,

Laurent Davoust https://orcid.org/0000-0001-9544-1578,

Alban Pothérat https://orcid.org/0000-0001-8691-5241.

Declaration of interests. The authors report no conflict of interest.

Appendix A. Expression of coefficients

Here we detail the explicit expression of the unknown coefficients {Uli,Bli}l=1..8\{U_l^i,B_l^i\}_{l=1..8}, for the velocity and the magnetic disturbances, respectively. As a reminder, the solution κ1i\kappa_1^i for the velocity and the magnetic disturbances is

{uθi,b~θi}(z,t)={es1iz({U1i,B1i}cos⁡(t+κ1iz)−{U2i,B2i}sin⁡(t+κ1iz))+e−s1iz({U3i,B3i}cos⁡(t−κ1iz)−{U4i,B4i}sin⁡(t−κ1iz))+es2iz({U5i,B5i}cos⁡(t+κ2iz)−{U6i,B6i}sin⁡(t+κ2iz))+e−s2iz({U7i,B7i}cos⁡(t−κ2iz)−{U8i,B8i}sin⁡(t−κ2iz))},(48)\left\{u_{\theta}^{i},\widetilde{b}_{\theta}^{i}\right\}(z,t)=\left\{e^{s_{1}^{i}z}\left(\left\{U_{1}^{i},B_{1}^{i}\right\}\cos\left(t+\kappa_{1}^{i}z\right)-\left\{U_{2}^{i},B_{2}^{i}\right\}\sin\left(t+\kappa_{1}^{i}z\right)\right) +e^{-s_{1}^{i}z}\left(\left\{U_{3}^{i},B_{3}^{i}\right\}\cos\left(t-\kappa_{1}^{i}z\right)-\left\{U_{4}^{i},B_{4}^{i}\right\}\sin\left(t-\kappa_{1}^{i}z\right)\right) +e^{s_{2}^{i}z}\left(\left\{U_{5}^{i},B_{5}^{i}\right\}\cos\left(t+\kappa_{2}^{i}z\right)-\left\{U_{6}^{i},B_{6}^{i}\right\}\sin\left(t+\kappa_{2}^{i}z\right)\right) +e^{-s_{2}^{i}z}\left(\left\{U_{7}^{i},B_{7}^{i}\right\}\cos\left(t-\kappa_{2}^{i}z\right)-\left\{U_{8}^{i},B_{8}^{i}\right\}\sin\left(t-\kappa_{2}^{i}z\right)\right)\right\}, \tag*{(48)}

so that we define the coefficient vectors as Bi=[Bl=1i ⋯ Bl=8i]T\mathbf{B}^{i}=\left[B_{l=1}^{i}\ \cdots\ B_{l=8}^{i}\right]^{\mathrm{T}} and Ui=[Ul=1i ⋯ Ul=8i]T\mathbf{U}^{i}=\left[U_{l=1}^{i}\ \cdots\ U_{l=8}^{i}\right]^{\mathrm{T}}. Here UiU^{i} and BiB^{i} are obtained using the boundary conditions (3.7, 3.8), the Sturm–Liouville problems (2.16, 2.17) and the Navier-Stokes equation (12). From these equations, we readily obtain the expression for UiU^{i},

Ui=[Ha−2Dz1i−1[RνD−M1i]N1iHa−2Dz2i−1[RνD−M2i]N2i]−1[UwiBwi],(49)U^{i}=\left[Ha^{-2}\mathbf{D}z_{1}^{i-1}\left[R_{\nu}\mathbf{D}-M_{1}^{i}\right]N_{1}^{i}\quad Ha^{-2}\mathbf{D}z_{2}^{i-1}\left[R_{\nu}\mathbf{D}-M_{2}^{i}\right]N_{2}^{i}\right]^{-1}\left[\begin{array}{c} U_{w}^{i} \\ B_{w}^{i} \end{array}\right], \tag*{(49)}

where are expressed the block-arrays for the magnetic and kinematic boundary conditions,

N1i=[10100101es1icos⁡κ1i−es1isin⁡κ1ie−s1icos⁡κ1ie−s1isin⁡κ1i−es1isin⁡κ1i−es1icos⁡κ1ie−s1isin⁡κ1i−e−s1icos⁡κ1i],N2i=[10100101es2icos⁡κ2i−es2isin⁡κ2ie−s2icos⁡κ2ie−s2isin⁡κ2i−es2isin⁡κ2i−es2icos⁡κ2ie−s2isin⁡κ2i−e−s2icos⁡κ2i],(50)N_{1}^{i}=\left[\begin{array}{cccc} 1 & 0 & 1 & 0 \\ 0 & 1 & 0 & 1 \\ e^{s_{1}^{i}}\cos\kappa_{1}^{i} & -e^{s_{1}^{i}}\sin\kappa_{1}^{i} & e^{-s_{1}^{i}}\cos\kappa_{1}^{i} & e^{-s_{1}^{i}}\sin\kappa_{1}^{i} \\ -e^{s_{1}^{i}}\sin\kappa_{1}^{i} & -e^{s_{1}^{i}}\cos\kappa_{1}^{i} & e^{-s_{1}^{i}}\sin\kappa_{1}^{i} & -e^{-s_{1}^{i}}\cos\kappa_{1}^{i} \end{array}\right], \qquad N_{2}^{i}=\left[\begin{array}{cccc} 1 & 0 & 1 & 0 \\ 0 & 1 & 0 & 1 \\ e^{s_{2}^{i}}\cos\kappa_{2}^{i} & -e^{s_{2}^{i}}\sin\kappa_{2}^{i} & e^{-s_{2}^{i}}\cos\kappa_{2}^{i} & e^{-s_{2}^{i}}\sin\kappa_{2}^{i} \\ -e^{s_{2}^{i}}\sin\kappa_{2}^{i} & -e^{s_{2}^{i}}\cos\kappa_{2}^{i} & e^{-s_{2}^{i}}\sin\kappa_{2}^{i} & -e^{-s_{2}^{i}}\cos\kappa_{2}^{i} \end{array}\right], \tag*{(50)}

the space first derivatives,

Dz1i=[s1i−κ1i00κ1is1i0000−siiκ1i00−κ1i−s1i],Dz2i=[s2i−κ2i00κ2is2i0000−s2iκ2i00−κ2i−s2i],(51)\mathbf{D}z_{1}^{i}=\left[\begin{array}{cccc} s_{1}^{i} & -\kappa_{1}^{i} & 0 & 0 \\ \kappa_{1}^{i} & s_{1}^{i} & 0 & 0 \\ 0 & 0 & -s_{i}^{i} & \kappa_{1}^{i} \\ 0 & 0 & -\kappa_{1}^{i} & -s_{1}^{i} \end{array}\right], \qquad \mathbf{D}z_{2}^{i}=\left[\begin{array}{cccc} s_{2}^{i} & -\kappa_{2}^{i} & 0 & 0 \\ \kappa_{2}^{i} & s_{2}^{i} & 0 & 0 \\ 0 & 0 & -s_{2}^{i} & \kappa_{2}^{i} \\ 0 & 0 & -\kappa_{2}^{i} & -s_{2}^{i} \end{array}\right], \tag*{(51)}

the time first derivative,

D=[0−1001000000−10010],(52)\mathbf{D}=\left[\begin{array}{cccc} 0 & -1 & 0 & 0 \\ 1 & 0 & 0 & 0 \\ 0 & 0 & 0 & -1 \\ 0 & 0 & 1 & 0 \end{array}\right], \tag*{(52)}

and the vector Laplacian operator,

M1i=[s1i 2−κ1i 2−κ⊥i 2−2κ1is1i002κ1is1is1i 2−κ1i 2−κ⊥i 20000s1i 2−κ1i 2−κ⊥i 2−2κ1is1i002κ1is1is1i 2−κ1i 2−κ⊥i 2],M2i=[s2i 2−κ2i 2−κ⊥i 2−2κ2is2i002κ2is2is2i 2−κ2i 2−κ⊥i 20000s2i 2−κ2i 2−κ⊥i 2−2κ2is2i002κ2is2is2i 2−κ2i 2−κ⊥i 2].(53)\mathbf{M}_{1}^{i} = \begin{bmatrix} s_{1}^{i\,2}-\kappa_{1}^{i\,2}-\kappa_{\perp}^{i\,2} & -2\kappa_{1}^{i}s_{1}^{i} & 0 & 0 \\ 2\kappa_{1}^{i}s_{1}^{i} & s_{1}^{i\,2}-\kappa_{1}^{i\,2}-\kappa_{\perp}^{i\,2} & 0 & 0 \\ 0 & 0 & s_{1}^{i\,2}-\kappa_{1}^{i\,2}-\kappa_{\perp}^{i\,2} & -2\kappa_{1}^{i}s_{1}^{i} \\ 0 & 0 & 2\kappa_{1}^{i}s_{1}^{i} & s_{1}^{i\,2}-\kappa_{1}^{i\,2}-\kappa_{\perp}^{i\,2} \end{bmatrix}, \qquad \mathbf{M}_{2}^{i} = \begin{bmatrix} s_{2}^{i\,2}-\kappa_{2}^{i\,2}-\kappa_{\perp}^{i\,2} & -2\kappa_{2}^{i}s_{2}^{i} & 0 & 0 \\ 2\kappa_{2}^{i}s_{2}^{i} & s_{2}^{i\,2}-\kappa_{2}^{i\,2}-\kappa_{\perp}^{i\,2} & 0 & 0 \\ 0 & 0 & s_{2}^{i\,2}-\kappa_{2}^{i\,2}-\kappa_{\perp}^{i\,2} & -2\kappa_{2}^{i}s_{2}^{i} \\ 0 & 0 & 2\kappa_{2}^{i}s_{2}^{i} & s_{2}^{i\,2}-\kappa_{2}^{i\,2}-\kappa_{\perp}^{i\,2} \end{bmatrix}. \tag*{(53)}

Once UiU^{i} is known, BiB^{i} is derived using Eq. (12) such that

Bi=Ha−2[D1i −1[RνDt−M1i]00D2i −1[RνDt−M2i]]Ui.(54)B^{i}=Ha^{-2} \begin{bmatrix} D_{1}^{i\,-1}\left[R_{\nu}D_{t}-M_{1}^{i}\right] & 0 \\ 0 & D_{2}^{i\,-1}\left[R_{\nu}D_{t}-M_{2}^{i}\right] \end{bmatrix} U^{i}. \tag*{(54)}

Note that the dependence of the solutions UiU^{i} and BiB^{i} on RνR_{\nu} and RηR_{\eta} is only implicit in equations (A2) and (A7), through the wavenumbers and attenuation coefficients {κ1i,κ2i}\{\kappa_{1}^{i},\kappa_{2}^{i}\} and {s1i,s2i}\{s_{1}^{i},s_{2}^{i}\}, obtained from the dispersion relation (18) where they appear explicitly.

Expression of the coefficients {Eli,Φli}l=1…8\{E_{l}^{i},\Phi_{l}^{i}\}_{l=1\ldots8}

Here we express explicitly the unknown coefficients {Eli,Φli}l=1…8\{E_{l}^{i},\Phi_{l}^{i}\}_{l=1\ldots8} for the radial electric field ErE_{r} and for the radial component of the potential gradient ∂rϕ\partial_{r}\phi, respectively. As a reminder, ErE_{r} and ∂rϕ\partial_{r}\phi take the form

{Er,∂rϕ}(r,z,t)=∑i=1N⊥{Eri,∂rϕi}(z,t)J1(κrir),(55)\{E_{r},\partial_{r}\phi\}(r,z,t)=\sum_{i=1}^{N_{\perp}}\{E_{r}^{i},\partial_{r}\phi^{i}\}(z,t)J_{1}\left(\kappa_{r}^{i}r\right), \tag*{(55)}

with

{Eri,∂rϕi}(z,t)={es1iz({E1i,Φ1i}cos⁡(t+κ1iz)−{E2i,Φ2i}sin⁡(t+κ1iz))+e−s1iz({E3i,Φ3i}cos⁡(t−κ1iz)−{E4i,Φ4i}sin⁡(t−κ1iz))+es2iz({E5i,Φ5i}cos⁡(t+κ2iz)−{E6i,Φ6i}sin⁡(t+κ2iz))+e−s2iz({E7i,Φ7i}cos⁡(t−κ2iz)−{E8i,Φ8i}sin⁡(t−κ2iz))}.(56)\begin{aligned} \{E_{r}^{i},\partial_{r}\phi^{i}\}(z,t)=\{& e^{s_{1}^{i}z}\left(\{E_{1}^{i},\Phi_{1}^{i}\}\cos\left(t+\kappa_{1}^{i}z\right)-\{E_{2}^{i},\Phi_{2}^{i}\}\sin\left(t+\kappa_{1}^{i}z\right)\right) \\ &+e^{-s_{1}^{i}z}\left(\{E_{3}^{i},\Phi_{3}^{i}\}\cos\left(t-\kappa_{1}^{i}z\right)-\{E_{4}^{i},\Phi_{4}^{i}\}\sin\left(t-\kappa_{1}^{i}z\right)\right) \\ &+e^{s_{2}^{i}z}\left(\{E_{5}^{i},\Phi_{5}^{i}\}\cos\left(t+\kappa_{2}^{i}z\right)-\{E_{6}^{i},\Phi_{6}^{i}\}\sin\left(t+\kappa_{2}^{i}z\right)\right) \\ &+e^{-s_{2}^{i}z}\left(\{E_{7}^{i},\Phi_{7}^{i}\}\cos\left(t-\kappa_{2}^{i}z\right)-\{E_{8}^{i},\Phi_{8}^{i}\}\sin\left(t-\kappa_{2}^{i}z\right)\right)\}. \tag*{(56)} \end{aligned}

so that we define the coefficient vectors Ei=[El=1i … El=8i]T\mathbf{E}^{i}=[E_{l=1}^{i}\ \ldots\ E_{l=8}^{i}]^{\mathrm{T}} and Φi=[Φl=1i … Φl=8i]T\mathbf{\Phi}^{i}=[\Phi_{l=1}^{i}\ \ldots\ \Phi_{l=8}^{i}]^{\mathrm{T}}. Using the block arrays (A4–A6) defined in appendix A, Eq. (37) and Eq. (39), we readily obtain the expression in term of UiU^{i} and BiB^{i} for Ei\mathbf{E}^{i},

Ei=−Ui−[D1i00D2i]Bi(57)\mathbf{E}^{i}=-U^{i}-\begin{bmatrix} D_{1}^{i} & 0 \\ 0 & D_{2}^{i} \end{bmatrix}B^{i} \tag*{(57)}

and Φi\mathbf{\Phi}^{i},

Φi=−[D1i−DtM1i −1D1i00D2i−DtM2i −1D2i]Bi−Ui.(58)\mathbf{\Phi}^{i}=-\begin{bmatrix} D_{1}^{i}-D_{t}M_{1}^{i\,-1}D_{1}^{i} & 0 \\ 0 & D_{2}^{i}-D_{t}M_{2}^{i\,-1}D_{2}^{i} \end{bmatrix}B^{i}-U^{i}. \tag*{(58)}

References

  1. [1]Alboussière, Thierry, Cardin, Philippe, Debray, François, La Rizza, Patrick, Masson, Jean-Paul, Plunian, Franck, Ribeiro, Adolfo & Schmitt, Denys 2011 Experimental evidence of Alfvén wave propagation in a Gallium alloy. Physics of Fluids 23 (9), 096601, number: 9 Publisher: American Institute of Physics.
  2. [2]Alboussière, T, Uspenski, V & Moreau, R 1999 Quasi-2D MHD turbulent shear layers. Exp. Therm. Fluid Sci. 20 (1), 19–24, number: 1.DOI
  3. [3]Alfvén, H. 1942 Existence of Electromagnetic-Hydrodynamic Waves. Nature 150 (3805), 405–406, number: 3805.DOI
  4. [4]Allen, T. K., Baker, William R., Pyle, Robert V. & Wilcox, John M. 1959 Experimental generation of plasma Alfvén waves. Phys. Rev. Lett. 2, 383–384.DOI
  5. [5]Andreev, Oleg, Kolesnikov, Yurii & Thess, André 2013 Visualization of the Ludford column. Journal of Fluid Mechanics 721, 438–453, publisher: Cambridge University Press.
  6. [7]Baker, Nathaniel T., Pothérat, Alban & Davoust, Laurent 2015 Dimensionality, secondary flows and helicity in low-rm MHD vortices. J. Fluid Mech. 779, 325–350.
  7. [8]Baker, Nathaniel T., Pothérat, Alban, Davoust, Laurent & Debray, François 2018 Inverse and direct energy cascades in three-dimensional magnetohydrodynamic turbulence at low magnetic Reynolds number. Phys. Rev. Lett. 120 (22), 224502, number: 22 Publisher: American Physical Society.
  8. [9]Baker, Nathaniel T., Pothérat, Alban, Davoust, Laurent, Debray, François & Klein, Rico 2017 Controlling the dimensionality of low-rm MHD turbulence experimentally. Exp. Fluids 58 (7), 79.DOI
  9. [10]Batchelor, G. K. 1967 An Introduction to Fluid Dynamics. Cambridge Mathematical Library 683. Cambridge: Cambridge University Press.
  10. [11]Bostick, Winston H. & Levine, Morton A. 1952 Experimental demonstration in the laboratory of the existence of magneto-hydrodynamic waves in ionized helium. Phys. Rev. 87, 671–671.
  11. [12]Bragingsky, S.I. 1970 Torsional magnetohydrodynamic vibrations in the Earth’s core and variations in day length. Geomagn. Aeron. 10 (1), 3–12.
  12. [13]Brito, D., Nataf, H. C., Cardin, P., Aubert, J. & P., Masson J. 2001 Ultrasonic doppler velocimetry in liquid gallium. Exp. Fluids 31 (6), 653–663.DOI
  13. [14]Brons, J., P.J., Thomas & Pothérat, A. 2020a Mean flow anisotropy without waves in rotating turbulence. J. Fluid Mech. 889, A37 1–18.
  14. [16]Carter, T. A., Brugman, B., Priybl, P. & Lybarger, W. 2006 Laboratory observation of a nonlinear interaction between shear Alfvén waves. Phys. Rev. Lett. 96, 155001.
  15. [17]Cassells, O., Vo, T. & Pothérat, A Sheard, G. 2019 From three-dimensional to quasi-two-dimensional: Linear transient growth in MHD duct flows. J. Fluid Mech. 861, 382–406.DOI
  16. [18]Cattell, CA 1996 Experimental evaluation of the Lundquist number for the Earth’s magnetopause and magnetotail. Journal of Geophysical Research: Space Physics 101 (A12), 27309–27316.
  17. [19]Davidson, P. A. 2001 An Introduction to Magnetohydrodynamics. Cambridge University Press.
  18. [21]Deguchi, Kengo 2020 Subcritical magnetohydrodynamic instabilities: Chandrasekhar’s theorem revisited. Journal of Fluid Mechanics 882, A20.DOI
  19. [22]Dickinson, S.C. & Long, R.R. 1983 Oscillating-grid turbulence including effects of rotation. Journal of Fluid Mechanics 126, 315–333.DOI
  20. [23]Dickinson, S. C. & Long, R. R. 1978 Laboratory study of the growth of a turbulent layer of fluid. The Physics of Fluids 21 (10), 1698–1701.
  21. [24]Dorfman, S. & Carter, T. A. 2013 Nonlinear excitation of acoustic modes by large-amplitude Alfvén waves in a laboratory plasma. Phys. Rev. Lett. 110, 195001.
  22. [25]Dorfman, S. & Carter, T. A. 2016 Observation of an Alfvén wave parametric instability in a laboratory plasma. Phys. Rev. Lett. 116, 195002.
  23. [26]Dymkou, V. & Pothérat, A. 2009 Spectral methods based on the least dissipative modes for wall bounded MHD flows. Theoretical and Computational Fluid Dynamics 23 (6), 535–555.
  24. [28]Favier, B., Godeferd, F. S., Cambon, C., Delache, A. & Bos, W. J. T. 2011 Quasi-static magnetohydrodynamic turbulence at high Reynolds number. Journal of Fluid Mechanics 681, 434–461.
  25. [29]Finlay, Christopher 2007 Alfvén Waves, pp. 3–6. Dordrecht: Springer Netherlands.DOI
  26. [30]Finlay, Christopher C. 2008 Course 8 waves in the presence of magnetic fields, rotation and convection. Les Houches Summer School Proceedings 88, 403 – 450, cited by: 27.
  27. [31]Frank, M., Barleon, L. & Müller, U. 2001 Visual analysis of two-dimensional magnetohydrodynamics. Phys. Fluids 13 (8), 2287–2295.
  28. [32]Franke, Sven, Büttner, Lars, Czarske, Jürgen, Räbiger, Dirk & Eckert, Sven 2010 Ultrasound doppler system for two-dimensional flow mapping in liquid metals. Flow Measurement and Instrumentation 21 (3), 402–409.
  29. [33]Gekelman, Walter, Vincena, Stephen, Leneman, David & Maggs, James 1997 Laboratory experiments on shear Alfvén waves and their relationship to space plasmas. Journal of Geophysical Research: Space Physics 102 (A4), 7225–7236.
  30. [34]Gillet, Nicolas, Gerick, Felix, Jault, Dominique, Schwaiger, Tobias, Aubert, Julien & Istas, Mathieu 2022 Satellite magnetic data reveal internal waves in Earth’s core. Proceedings of the National Academy of Sciences 119 (13), e2115258119.
  31. [35]Gillet, N., Jault, D., Canet, E. & Fournier, A. 2010 Fast torsional waves and strong magnetic field within the Earth’s core. Nature 465, 74–77.
  32. [36]Grant, S.D.T., Jess, D.B., Zaqarashvili, T.V., Beck, C., Soccas-Navarro, H., Achawanden, M. J., Keys, P. H., Christian, D. J., Houston, S. J. & Hewitt, R. L. 2018 Alfvén wave dissipation in the solar chromosphere. Nature Phys 14, 480–483.
  33. [37]Hanasoge, Shravan, Birch, Aaron, Gizon, Laurent & Tromp, Jeroen 2012 Seismic probes of solar interior magnetic structure. Physical review letters 109 (10), 101101.DOI
  34. [38]Herreman, W., Nore, C., Ziebell Ramos, P., Capanera, L., Guermond, J.-L. & Weber, N. 2019 Numerical simulation of electrowortex flows in cylindrical fluid layers and liquid metal batteries. Physical Review Fluids 4 (11), 113702.
  35. [39]Heyvaerts, J & Priest, Eric R 1983 Coronal heating by phase-mixed shear Alfvén waves. Astronomy and Astrophysics 117 (2), 220–234.
  36. [40]Holst, B. van der, Sokolov, I. V., Meng, X., Jin, M., W. B. Manchester, IV, Tóth, G. & Gombosi, T. I. 2014 Alfvén wave solar model (AWSOM): Coronal heating. The Astrophysical Journal 782 (2), 81.
  37. [41]Hori, Kumiko, Jones, Chris A, Antuñano, Arrate, Fletcher, Leigh N & Tobias, Steven M 2023 Jupiter’s cloud-level variability triggered by torsional oscillations in the interior. Nature Astronomy 7 (7), 825–835.
  38. [42]Howes, G. G. 2015 A dynamical model of plasma turbulence in the solar wind. Phil. Trans. R. Soc. A. 373, 3732014014520140145.
  39. [43]Howes, G. G., Drake, D. J., Nielson, K. D., Carter, T. A., Kletzing, C. A. & Skiff, F. 2012 Toward astrophysical turbulence in the laboratory. Phys. Rev. Lett. 109, 255001.DOI
  40. [44]Howes, G. G., Nielson, K. D., Drake, D. J., Schroeder, J. W. R., Skiff, F., Kletzing, C. A. & Carter, T. A. 2013 Alfvén wave collisions, the fundamental building block of plasma turbulence. III. Theory for experimental design. Physics of Plasmas 20 (7), 072304.
  41. [45]Hunt, J. C. R, Abell, C. J., Peterka, J. A. & Woo, H. 1978 Kinematical studies of the flows around free or surface-mounted obstacles; applying topology to flow visualization. J. Fluid Mech. 86 (1), 179–200.
  42. [46]Iwai, K., Shinya, K. & Takashi, K. Moreau, R. 2003 Pressure change accompanying Alfvén waves in a liquid metal. Magnetohydrodynamics 39 (3), 245–250.
  43. [47]Jameson, Antony 1964 A demonstration of Alfvén waves Part 1. Generation of standing waves. Journal of Fluid Mechanics 19 (4), 513–527, number: 4.
  44. [48]Jault, D. & Finlay, C.C. 2015 8.09 - waves in the core and mechanical core–mantle interactions. In Treatise on Geophysics (Second Edition), Second edition edn. (ed. Gerald Schubert), pp. 225–244. Oxford: Elsevier.
  45. [49]Jephcott, DF & Stocker, PM 1962 Hydromagnetic waves in a cylindrical plasma: an experiment. Journal of Fluid Mechanics 13 (4), 587–596.
  46. [50]Klein, R. & Pothé́rat, A. 2010 Appearance of three dimensionality in wall-bounded MHD flows. Phys. Rev. Lett. 104 (3), 034502, number: 3 Publisher: American Physical Society.
  47. [51]Klein, R, Pothérat, A & Alferenok, Artem 2009 Experiment on a confined electrically driven vortex pair. Physical review E 79, 016304.pubmed.ncbi.nlm.nih.gov/19257136
  48. [52]Kljukin, A. & Thess, A. 1998 Direct measurement of the stream-function in a quasi-two-dimensional liquid metal flow. Experiments in Fluids 25 (4), 298–304.
  49. [53]Knaepen, B., Kassinos, S. & Carati, D. 2004 Magnetohydrodynamic turbulence at moderate magnetic Reynolds number. Journal of Fluid Mechanics 513, 199–220.
  50. [54]Knaepen, Bernard & Moreau, René 2008 Magnetohydrodynamic Turbulence at Low Magnetic Reynolds Number. Annual Review of Fluid Mechanics 40 (1), 25–45.
  51. [55]Kornet, Kacper & Pothérat, Alban 2015 A method for spectral DNS of low Rm channel flows based on the least dissipative modes. Journal of Computational Physics 298, 266–279.DOI
  52. [56]Lehnert, Bo 1954 Magneto-Hydrodynamic Waves in Liquid Sodium. Physical Review 94 (4), 815–824, number: 4.
  53. [57]Lehnert, B 1955 The decay of magneto-turbulence in the presence of a magnetic field and coriolis force. Quarterly of Applied Mathematics 12 (4), 321–341.
  54. [59]Lundquist, S. 1949 Experimental Investigations of Magneto-Hydrodynamic Waves. Physical Review 76 (12), 1805–1809, number: 12.DOI
  55. [60]Luo, Jiawen & Jackson, Andrew 2022 Waves in the Earth’s core. i. mildly diffusive torsional oscillations. Proc. R. Soc. A. 478, 4782021098220210982.DOI
  56. [61]Majumder, Debarshi & Sreenivasan, Binod 2023 The role of magnetic waves in tangent cylinder convection. Physics of the Earth and Planetary Interiors 344, 107105.DOI
  57. [62]McLaughlin, J. A., De Moortel, I. & Hood, A. W. 2011 Phase mixing of nonlinear visco-resistive Alfvén waves. Astronomy & Astrophysics 527, A149.DOI
  58. [63]Moffatt, H. K. 1967 On the suppression of turbulence by a uniform magnetic field. J. Fluid Mech. 28, 571–592.DOI
  59. [64]Moreau, R. 1990 Magnetohydrodynamics. Kluwer Academic Publisher.
  60. [65]Moudjed, B., Pothérat, A. & Holdsworth, M. 2020 PIV mapping of pressure and velocity fields in the plane magnetohydrodynamic Couette flow. Experiments in Fluids 61 (12), 255.DOI
  61. [66]Nakariakov, Valery M. & Kolotkov, Dmitrii Y. 2020 Magnetohydrodynamic waves in the solar corona. Annual Review of Astronomy and Astrophysics 58, 441–481.DOI
  62. [67]Nakariakov, V. M., L. Ofman, Deluca, E. E., B. Roberts & Davila, J. M. 1999 Trace observation of damped coronal loop oscillations: Implications for coronal heating. Science 285 (5429), 862–864.pubmed.ncbi.nlm.nih.gov/10436148
  63. [68]Nornberg, MD, Ji, H, Schartman, E, Roach, A & Goodman, J 2010 Observation of magnetocoriolis waves in a liquid metal Taylor-Couette experiment. Physical review letters 104 (7), 074501.
  64. [69]Pothérat, A. & Klein, R. 2017 Do magnetic fields enhance turbulence at low magnetic Reynolds number? Phys. Rev. Fluids 2 (6), 063702.DOI
  65. [70]Pothérat, A., Sommeria, J. & Moreau, R. 2000 An effective two-dimensional model for mhd flows with transverse magnetic field. Journal of Fluid Mechanics 424, 75–100.DOI
  66. [71]Pothérat, A. & Alboussière, T. 2003 Small scales and anisotropy in low-Rm magnetohydrodynamic turbulence. Physics of Fluids 15 (10), 3170–3180.DOI
  67. [72]Pothérat, Alban & Alboussière, Thierry 2006 Bounds on the attractor dimension for low-Rm wall-bound magnetohydrodynamic turbulence. Physics of Fluids 18 (12), 125102.DOI
  68. [73]Pothérat, Alban & Dymkou, Vital 2010 Direct numerical simulations of low-Rm MHD turbulence based on the least dissipative modes. Journal of Fluid Mechanics 655, 174–197, publisher: Cambridge University Press.DOI
  69. [74]Pothérat, Alban & Klein, Rico 2014 Why, how and when MHD turbulence at low becomes three-dimensional. Journal of Fluid Mechanics 761, 168–205, publisher: Cambridge University Press.DOI
  70. [75]Pothérat, Alban & Kornet, Kacper 2015 The decay of wall-bounded MHD turbulence at low. Journal of Fluid Mechanics 783, 605–636, publisher: Cambridge University Press.DOI
  71. [76]Prokopyszyn, A. P. K., Hood, A. W. & De Moortel, I. 2019 Phase mixing of nonlinear Alfvén waves. Astronomy & Astrophysics 624, A90.DOI
  72. [77]Roberts, P. H. 1967 An introduction to magnetohydrodynamics. New York: American Elsevier Pub. Co., open Library ID: OL14117453M.
  73. [78]Roberts, Paul H & Zhang, Keke 2000 Thermal generation of alfvén waves in oscillatory magnetoconvection. Journal of Fluid Mechanics 420, 201–223.DOI
  74. [79]Salem, Chadi S, Howes, GG, Bundkvist, D, Bale, SD, Chaston, CC, Chen, CHK & Mozer, FS 2012 Identification of kinetic alfvén wave turbulence in the solar wind. The Astrophysical Journal Letters 745 (1), L9.
  75. [80]Sarkar, Subharthi, Ghosh, Samit, Sivakumar, R. & Sekhar, T. V. S. 2019 On the quasi-static approximation in the finite magnetic Reynolds number magnetohydrodynamic flow past a circular cylinder. European Journal of Mechanics - B/Fluids 77, 259–272.DOI
  76. [81]Sarris, I. E., Zikos, G. K., Grecos, A. P. & Vlachos, N. S. 2006 On the Limits of Validity of the Low Magnetic Reynolds Number Approximation in MHD Natural-Convection Heat Transfer. Numerical Heat Transfer, Part B: Fundamentals 50 (2), 157–180.
  77. [82]Schaeffer, Nathanaël, Jauldi, Dominique, Cardin, Philippe & Drouard, Marie 2012 On the reflection of Alfvén waves and its implication for Earth’s core modelling. Geophysical Journal International 191 (2), 508–516.
  78. [83]Schmitt, Denys, Cardin, Philippe, La Rizza, Patrick & Nataf, H-C 2013 Magneto–coriolis waves in a spherical Couette flow experiment. European Journal of Mechanics-B/Fluids 37, 10–22.DOI
  79. [84]Schwaiger, T., Gillet, N., Jaul t, D., Istas, M. & Mandea, M. 2024 Wave-like motions and torques in Earth’s core as inferred from geomagnetic data: A synthetic study. Physics of the Earth and Planetary Interiors 346, 107104.DOI
  80. [85]Singh, Kap & Subramanian, Prasad 2007 An evaluation of possible mechanisms for anomalous resistivity in the solar corona. Solar Physics 243, 163–169.
  81. [87]Sommeria, J. 1988 Electrically driven vortices in a strong magnetic field. J. Fluid Mech. 189, 553–569.DOI
  82. [88]Sommeria, Joël & Moreau, René 1982 Why, how, and when, MHD turbulence becomes two-dimensional. J. Fluid Mech. 118, 507–518, publisher: Cambridge University Press.DOI
  83. [89]Stefani, F., Forbriger, J., Gundrum, Th., Herrmannsdörfer, T. & Wosnitza, J. 2021 Mode conversion and period doubling in a liquid rubidium Alfvén-wave experiment with coinciding sound and Alfvén speeds. Phys. Rev. Lett. 127, 275001.DOI
  84. [90]Thomas, A., Bassom, A. & Davies, C. 2010 Linear stability of a Stokes layer with an imposed axial magnetic field, the. J. Fluid Mech. 662, 320–328.DOI
  85. [91]Tigrine, Zahia, Nataf, Henri-Claude, Schaeffer, Nathanaël, Cardin, Philippe & Plunian, Franck 2019 Torsional Alfvén waves in a dipolar magnetic field: experiments and simulations. Geophysical Journal International 219 (Supplement-1), S83–S100.
  86. [92]Tomczyk, S., McIntosh, S. W., Keil, S. L., Judge, P. G., Schad, T., Seeley, D. H. & Edmondson, J. 2007 Alfvén waves in the solar corona. Science 317 (5842), 1192–1196.
  87. [93]Tsurutani, Bruce T & Ho, Christian M 1999 A review of discontinuities and Alfvén waves in interplanetary space: Ulysses results. Reviews of Geophysics 37 (4), 517–541.DOI
  88. [94]Varma, Aditya & Sreenivasan, Binod 2022 The role of slow magnetostrophic waves in the formation of the axial dipole in planetary dynamos. Physics of the Earth and Planetary Interiors 333, 106944.DOI
  89. [95]Wilcox, John M, DeSilva, Alan W & Cooper, William S 1961 Experiments on Alfvén-wave propagation. Phys. Fluids 4 (12), 1506–1513.
  90. [96]Woods, LC 1962 Hydromagnetic waves in a cylindrical plasma. Journal of Fluid Mechanics 13 (4), 570–586.DOI
  91. [97]Yarom, E. & Sharon, E. 2014 Experimental observation of steady inertial wave turbulence in deep rotating flows. Nature Physics 10 (7), 510.DOI
  92. [98]Zaqarashvili, T. V. & Roberts, B. 2006 Two-wave interaction in ideal magnetohydrodynamics. Astronomy & Astrophysics 452 (3), 1053–1058, number: 3 Publisher: EDP Sciences.DOI
  93. [99]Zikanov, Oleg, Krasnov, Dmitry, Boeck, Thomas, Thess, Andre & Rossi, Maurice 2014 Laminar-turbulent transition in magnetohydrodynamic duct, pipe, and channel flows. Applied Mechanics Reviews 66 (3), 030802.DOI

Paper details

vlnc:W_5g63g72u
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents