WorksPhysics and Astronomy
On the determination of the meson width in the nuclear medium with the transparency ratio
Abstract
We have studied the feasibility of the experimental determination of the width of a meson in a nuclear medium by using the method of the nuclear transparency. The cross section for inclusive production of a in different nuclei is evaluated, taking care of the absorption in the nucleus, or equivalently, the survival probability of the in its way out of the nucleus from the point of production. We use present values of the in medium width of mesons and calculate ratios of the cross sections for different nuclei to the nucleus as reference. We find ratios of the order of for heavy nuclei, a large deviation from unity, which indicates that the method proposed is adequate to measure this relevant magnitude, so far only known theoretically.
Introduction
The study of the modification of meson properties inside a nuclear medium has attracted and continues attracting much attention in the physics community. Reviews on the subject can be found in Refs. [1, 2, 3, 4, 5] (see also extended information in Ref. [6]). For light mesons there have been many methods to study the meson nucleus interaction, like scattering of pions and kaons with nuclei, or mesonic atoms, because of the availability of pion and kaon beams [1, 7]. The experimental investigation of meson properties for which there are no beams is certainly more difficult, as is the case of or nucleus interaction and the possibility of having or nuclear bound states, which have nevertheless had much experimental attention [8, 9, 10, 11, 12, 13, 14, 15, 16, 17].
Our purpose here is to present an experimental method to study the modification of the meson properties in a nuclear medium. The medium properties of mesons have been thoroughly studied theoretically [18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31]. However, how to observe experimentally the theoretical predictions remains still an unexplored field. In the present work we propose a method which is based on the use of the transparency ratio in -nucleus collisions producing mesons.
The method of the transparency ratio was proposed in Ref. [32] to determine the width of antiprotons in a nuclear medium. While there are beams available, the measurement of the absorption in nuclei was found basically useless, because with such a large annihilation, the absorption cross section is roughly , with the radius of the nucleus, independently of the width in the nucleus, meaning that all will be basically absorbed. If one reduces this width, the are absorbed later in the nucleus but are absorbed anyway. The insensitivity of these experiments to determine the properties in the medium stimulated the suggestion of using the production of in nuclei rather than the absorption from a beam. The ideal reaction is to use photons that can reach all parts of the nucleus with negligible absorption and then produce the antiprotons and see their survival probability. This magnitude is then very sensitive to the width in the medium and then, by measuring the production in different nuclei, one can make a determination of the width in the medium.
The method has become popular and has been used with the same purpose to determine particle properties in the medium [33, 34, 35, 36, 37, 38, 39, 40, 41]. In Ref. [37] the transparency ratio method was used in the reaction comparing the production in several nuclei, , , and , and to eliminate the possible contribution of multinucleon production processes the production rates were normalized to that of the . We shall investigate the same nuclei here and study the reaction in these different nuclei to see the sensitivity to the width in the medium. We shall take the results for the medium properties from [23]. The work will be exploratory and we shall make some approximations, which, however, still allow to obtain reasonable transparency ratios. When the idea proposed here is eventually implemented experimentally, some improvements can be done which we will mention at the end.
This paper is organized as follows. In § 2 we introduce the formalism of the transparency ratio method applied to the reaction, starting by presenting a simple model for the absorption of the meson produced inside the nucleus, and then paying attention to the kinematics of the three-body final state that enter the phase space integral needed for the computation of the nucleus cross section. Sec. III presents the theoretical predictions for the transparency ratio of the meson. Since the width is not exactly determined in the model of Ref. [23] at the momenta involved in this work, we consider different scenarios for the width inspired by the said model. We also engage in a discussion about the optimal energy needed for the production of a maximal number of mesons with small momentum. We finish this section considering some caveats that the computation and measurement present, giving as well some possible solutions that could be taken into consideration in future works. In Sec. III A we present an improved method where realistic nuclear densities are used and aspects of the dependence of the production amplitudes are considered. Finally, in Sec. IV we present our conclusions.
Formalism
With the prospective character of the paper we start from using a simplified picture for the nuclei, assuming a sphere of constant density . In Sec. III A we shall use realistic densities. Then,
where is the nuclear radius and is the nuclear mass number. Our picture for production will start from an elementary reaction
where and refer to the initial and final nucleons, respectively. Note that we must produce a in connection with to conserve charm. If we were looking at production we could have it through a two-body final state as , but in the absence of elementary baryons with , we stick to the production through the mechanism of Eq. (2). The process proceeds as depicted in Figure 1. We are not concerned with what happens to the and the nucleon, and only follow the and evaluate the survival probability to arrive at the surface of the nucleus and leave it to be detected.
Figure 1. Schematic picture of the process considered for the reaction.
Following Ref. [23] we use the selfenergy of the in the nuclear medium, as a function of the nuclear density and its momentum in the rest frame of the nucleus. We know that
is the differential probability of absorption in a distance . In Eq. (3) stands for the selfenergy in the nuclear medium, which includes inelastic and quasielastic channels; and is the modulus of the three-momentum of the in the laboratory (lab) frame, where the nucleus is at rest. Then, the survival probability of this without undergoing reactions is given by
with
For the constant density nuclei, this integral can be calculated analytically and it is given by
with
where is the angle between and (in the nucleus rest frame).
The next step is to evaluate the phase space for the process and the cross section for each nucleus. We take the photon in the direction and first evaluate the phase space in the center of mass frame, assuming the momentum ( being the initial nucleon) to be at rest in the nucleus rest frame, which is a good assumption given the large momenta of the photons involved in the reaction. Then, the cross section is given by
where is the squared modulus of the transition matrix, which we take as a constant in the simplifying path that we follow and then it will cancel out when evaluating the transparency ratio at the end. This will be improved in Sec. III A. In Eq. (8), is given by
Additionally, is the momentum of the in the center of mass frame
and is an integration variable corresponding to the invariant mass of (with the emitted nucleon in ). The integration limits of are
Furthermore, denotes the momentum of the in the rest frame
with the Källén function, and is the position inside the nucleus where the reaction takes place, given by
In the previous expression for we take because when doing the integral over all angles of it is unnecessary to make an extra rotation in .
This settles the issue of the phase space in the evaluation of and the only step missing is how to calculate the momentum of the in the lab frame of the nucleus at rest. This is done by means of a boost from the frame where the initial nucleon has a momentum
to the frame where the is at rest. We apply the general formula given in Ref. [42]
where and are the three-momentum and energy of the initial nucleon in the center of mass frame.
Once this is done, one defines the transparency ratio as
where is the nucleon cross section, is the nucleus mass number and is the corresponding nucleus cross section. However, we prefer to normalize to the results in order to reduce the effect of multi-step processes leading to the same final states, as was done in Ref. [37], and finally define
Next we do some considerations on the energies needed for the process. The minimum value of for is
which corresponds to a . We want to optimize the original set up to the input that we have. The medium selfenergy of the meson is calculated in Ref. [23] for momenta up to about 1 GeV. Then it is easy to calculate the kinematics of the emitted and see that if we have small values of , the minimum momenta of the in the lab frame are of the order of 3 GeV. But we also see that if we take values of around GeV or higher, then the minimum values stabilize around 1.4 1.5 GeV.
There is another thing we do to maximize the efficiency of the proposed experiment. Because our calculations are done up to about GeV, and the minimum momenta are also bigger than 1.4 GeV, we select momenta GeV. Then, we check which is the photon energy which maximizes the fraction of that come with a momentum in that range.
Results
Following Ref. [23], we take
which, by using , gives a width in the medium of about 47 MeV for GeV. There is no need to worry about the density dependence at this point since our nuclei have constant density .
In Figure 2 we show the fraction of momenta with GeV as a function of the photon three-momentum in the lab frame. This is computed using a Monte Carlo integration method for the phase space of Eq. (8) and counting the number of times that the is smaller than 2 GeV with respect to the total number of Monte Carlo points in the integral. As we can see from this figure, the optimal photon momentum is of about GeV. This corresponds to a photon nucleon invariant mass of about GeV. We choose this energy to carry out the calculations of the transparency ratio.

Figure 2. Percentage of mesons with GeV as a function of of .
In Figure 3 we show the results for the transparency ratio of Eq. (17). As we can see, the function diverges substantially from unity, which tells us that an actual measurement of this ratio can give information on . This was actually the case when studying the emission of in nuclei [37], from where one could induce, using the data, that the width of the in a nuclear medium at was MeV. To show the sensitivity of to the value of , we redo the calculations using and , which correspond to a half and a quarter of the value presented in Eq. (19), respectively. We see in Figure 3 that the values of are now closer to 1, but still significantly different from unity, such that one can still distinguish possible values of smaller than what was evaluated in Ref. [23].
Figure 3. transparency ratio of Eq. (17), normalized to C as a function of the mass number of nuclei. The three lines show the transparency ratio calculated with the different values of . The points in the figure indicate the results for C, Ca, Nb, and Pb.
Once this point is reached, let us discuss some related caveats. Our calculations are based on the assumption that is mostly due to genuine absorption, where the disappears and that the quasielastic contribution is relatively small. While this is the case in our calculations [23], where the main channels for stem from , , , , there is another filter that one could do in future studies when data are available. Indeed, the kinematics of the process, with very fast photons, lead to all in a very narrow cone in the forward direction in the rest frame. The that we have selected have a small momenta, as we say between 1.4 2 GeV. These colliding with other nucleons in the nuclei with will show a dispersion of angles, where the final will not be so forward peaked as the primary produced. One can then put an extra filter on forward angles for the , such that only these which do not undergo any reaction are observed. In this case we would obtain the full for in the medium. One can argue similarly for primary produced with momentum larger than 2 GeV, which lose energy after a quasielastic collision. In a further step one can consider the shadowing of photons at the energy where the experiment is done, which is always much smaller than the strong absorption of the mesons [37].
Improvements on nuclei density profiles and momentum-dependent photoproduction amplitudes
In the calculations done we have made approximations, which allow us to obtain sensible results with a minimum computing time. Yet, one might rightly state that the consideration of actual nuclear densities and the momentum dependence of the transition amplitudes would alter the results obtained notably. In this section we address these two issues.
In the first place we take the nuclear density from Ref. [43], as used in Ref. [37]. For C we use a harmonic oscillator shape
with normalized such that and , fm. For Ca, Nb, Pb we take the Woods-Saxon shape
with normalized such that for each nucleus and the parameters and given in Table I. Now the integral of Eq. (4), which before could be done analytically by means of Eq. (7), has to be done numerically for each value of and appearing in the Monte Carlo calculation. This integral is done using a Gaussian integration algorithm. becomes now .
| Nucleus | [fm] | [fm] |
| 3.51 | 0.563 | |
| 4.87 | 0.573 | |
| 6.62 | 0.549 |
Table 1. Values of and for , , .
The next issue is the momentum dependence of the photoproduction amplitude. One reason to normalize the production of different nuclei to the one of was that details on the production amplitude largely canceled in that ratio, which was essentially tied to the width of the produced particle in the medium. In the present case we can benefit to account for the momentum dependence of the amplitude from the work of Ref. [44]. In that paper a calculation is done for the and related reactions, and momentum and angular dependencies are evaluated. While taking into account explicitly all the dependencies is beyond reach, we have taken advantage of these results to prove the large insensitivity of the transparency ratio to such details. For this purpose we have chosen the dependence of the cross section in the variable , which gives rise by far to the largest changes on the cross section, a two orders of magnitude reduction from to . Hence, we have taken for our transition matrix element squared the dependence of
Taking this into consideration forces us to introduce more variables into the evaluation of the cross section of Eq. (8). Indeed, in this formula the integration of the momentum of the in the rest frame was done as
The value of is still given by Eq. (12) but now we replace
such that
To evaluate the nucleon momentum transfer we boost the initial nucleon momentum from the rest frame, where with given in Eq. (9), and where the system has momentum , to the frame where the system is at rest. We find now
where and are the energy of the system and the initial nucleon in the rest frame, respectively. Now we can evaluate the momentum transfer squared:
where . We have introduced two new integrals in the Monte Carlo integration, plus the external Gaussian integration for the computation of the quantity. This yields an increase in the computing time, but the calculation remains yet perfectly feasible.
In Figure 4 we show the new results that we obtain for the transparency ratio, after normalizing to the results, compared to those obtained before with the simplified formulas. There are some changes, but the results are very similar. For instance, for the differences are of the order of 5%, and a bit bigger for and . We should expect fewer changes from other momentum dependencies of the amplitude. We confirm what was found in [37] about the insensitivity of the transparency ratio to details of the production. We have checked that most of the differences in Figure 4 are indeed largely due to the use of the realistic densities, while the details of the transition amplitude are relatively unimportant. The errors for the final results (green squares in Figure 4) are obtained by running several times the Monte Carlo calculations with different seeds. We take the average from the different runs and the dispersion of the results with respect to the average gives us the error. In the original calculations (red line), as well as in the results considering only the nuclear density distributions correction (blue circles), the errors arising from the Monte Carlo integration are negligible.
Figure 4. Green squares: results for the transparency ratio to using realistic densities with and GeV, as well as the momentum dependence of the photoproduction amplitude. Red solid line: result of Figure 3 for GeV with the simplified treatment. Blue circles: results obtained when only the changes in the nuclear density are considered.
As to the actual facilities where the reactions could be done, the GlueX Facility in Jefferson Lab [45] can produce photons up to an energy around 12 GeV. This energy, although sufficient to produce the pair (the minimum needed to generate the pair at threshold is of 11.2 GeV), is not able to generate the desirable low-momentum mesons with GeV. As seen in Figure 2, the magnitude of required for this is of around 21 GeV. However, if the energy of the electrons at JLab were to be upgraded to 22 GeV, as has been proposed in Ref. [46], it would be possible to produce low-momentum mesons, although with small statistics. Apart from GlueX, there are other future accelerators that will be able to generate the energies needed for process to occur while maximizing the number of low-momentum mesons. One such example is the EIC in the US, which will reach electron-proton center of mass energies of up to 100 GeV [47]. Another example is the EicC in China, where they will collide electrons and several nuclei for center of mass energies ranging from 10 to 15 GeV [48]. The method proposed to measure the width of the in a nuclear medium is to our knowledge the first experimental reaction suggested to actually measure such physical magnitude.
Conclusions
We have explored the feasibility of measuring the width of the mesons in nuclei by using the method of the nuclear transparency. The reaction suggested is , where the elementary reaction taking place in the nucleus is , with the nucleons in the nucleus. The is followed once produced, and the probability that it survives without being absorbed in the nucleus is evaluated. Then the total cross section for the nuclear reaction is calculated, with a choice of variables in the integration that allows us to easily evaluate different magnitudes of relevance for the reaction, like the fraction of mesons that leave the nucleus with a certain momentum, the angles of the produced particles, invariant masses of the and particles not observed, etc.
We perform the calculations using the results for in the nuclear medium of Ref. [23], and calculate the ratio of cross sections for production in different nuclei to that of the nucleus. Since is calculated up to about 1 GeV of momentum, and there is a minimum momentum of about 1.4 GeV for the produced, we put a filter of observed with momentum smaller that 2 GeV. To optimize the efficiency of the reaction we look for the energy of the photons for which the fraction of mesons produced in this range is maximum, which we obtain around for for a nucleon of the nucleus of about 10 GeV. The transparency ratios that we get relative to the nucleus reach values of 0.6 for nuclei like , which is a substantial reduction which should be easy to see in actual experiments. The reactions could be carried in a future experiment like the EIC or the EicC, or in a future upgrade of GlueX.
We have made some approximations to make the calculations easier and clearer in this first exploratory approach. With respect to these approximations, we have also considered a list of issues where improvements can be done, once one knows the photon energies that will be used and other particular circumstances in an eventual implementation of the experiment. For the moment we have demonstrated the feasibility of the experiment and the optimal conditions for a successful determination of the selfenergy evaluated theoretically. We hope the work done stimulates interest in the experimental side.
Acknowledgments
This work was supported under contracts No. PID2020-112777GB-I00, and No. PID2022-139427NB-I00 financed by the Spanish MCIN/AEI/10.13039/501100011033/FEDER, UE, by Generalitat Valenciana under contract PROMETEO/2020/023, and from the project CEX2020-001058-M (Unidad de Excelencia “María de Maeztu”) and CEX2023-001292-S (Centro de Excelencia “Severo Ochoa”). This project has received funding from the European Union Horizon 2020 research and innovation programme under the program H2020-INFRAIA-2018-1, grant agreement No. 824093 of the STRONG-2020 project. This work of N. I. was partly supported by JSPS KAKENHI Grant Number 24K07020. M. A. and V. M. are supported through Generalitat Valenciana (GVA) Grants No. CIDEGENT/2020/002 and ACIF/2021/290, respectively. L. T. also acknowledges support from the CRC-TR 211 ’Strong-interaction matter under extreme conditions’- project Nr. 315477589 - TRR 211 and from the Generalitat de Catalunya under contract 2021 SGR 00171.
References
References
- [1]J.A. Oller, E. Oset and A. Ramos, Chiral unitary approach to meson meson and meson - baryon interactions and nuclear applications, Prog. Part. Nucl. Phys. 45 (2000) 157 [hep-ph/0002193].DOI
- [2]M. Post, S. Leupold and U. Mosel, Hadronic spectral functions in nuclear matter, Nucl. Phys. A 741 (2004) 81 [nucl-th/0309085].DOI
- [3]R.S. Hayano and T. Hatsuda, Hadron properties in the nuclear medium, Rev. Mod. Phys. 82 (2010) 2949 [0812.1702].DOI
- [4]V. Metag, M. Nanova and E.Y. Par ev, Meson–nucleus potentials and the search for meson–nucleus bound states, Prog. Part. Nucl. Phys. 97 (2017) 199 [1706.09654].DOI
- [5]L. Tolos and L. Fabbietti, Strangeness in Nuclei and Neutron Stars, Prog. Part. Nucl. Phys. 112 (2020) 103770 [2002.09223].
- [6]T.E.O. Ericson and W. Weise, Pions and Nuclei, Clarendon Press, Oxford, UK (1988).
- [7]E. Friedman and A. Gal, In-medium nuclear interactions of low-energy hadrons, Phys. Rep. 452 (2007) 89 [0705.3965].DOI
- [8]CBELSA/TAPS collaboration, Determination of the η′-nucleus optical potential, Phys. Lett. B 727 (2013) 417 [1311.0122].
- [9]CBELSA/TAPS collaboration, The η′ -carbon potential at low meson momenta, Eur. Phys. J. A 54 (2018) 182 [1810.1288].
- [10]n-PRiME/Super-FRS collaboration, Measurement of excitation spectra in the 12C(p, d) reaction near the η′ emission threshold, Phys. Rev. Lett. 117 (2016) 202501 [1611.02948].pubmed.ncbi.nlm.nih.gov/27886506
- [11]LEPS2/SB@GExist collaboration, Search for η′ bound nuclei in the 12C(γ, p) reaction with simultaneous detection of decay products, Phys. Rev. Lett. 124 (2020) 202501 [2005.03449].
- [12]S.D. Bass, V. Metag and P. Moskal, The η- and η′-Nucleus Interactions and the Search for η, η′- Mesic States, in Handbook of Nuclear Physics, I. Tanihata, H. Toki and T. Kajino, eds., pp. 1–28 (2022), DOI [2111.01388].
- [13]J.-J. Xie, W.-H. Liang, E. Oset, P. Moskal, M. Skurzok and C. Wilkin, Determination of the η3He threshold structure from the low energy pd → η3He reaction, Phys. Rev. C 95 (2017) 015202 [1609.03399].DOI
- [14]J.-J. Xie, W.-H. Liang and E. Oset, η4He interaction from the dd → η4He reaction near threshold, Eur. Phys. J. A 55 (2019) 6 [1805.12532].DOI
- [15]N. Ikeno, H. Nagahiro, D. Jido and S. Hirenzaki, η-nucleus interaction from the d + d reaction around the η production threshold, Eur. Phys. J. A 53 (2017) 194 [1708.07692].DOI
- [16]M. Skurzok, P. Moskal, N.G. Kelkar, S. Hirenzaki, H. Nagahiro and N. Ikeno, Constraining the optical potential in the search for η-mesic 4He, Phys. Lett. B 782 (2018) 6 [1802.08597].DOI
- [17]N. Ikeno, Y. Higashi, H. Fujioka, K. Itahashi, R. Sekiya, Y.K. Tanaka et al., Feasibility of the observation of η′ mesic nuclei in the semi-exclusive 12C(p, d) reaction, 2406.06058.
- [18]L. Tolos, J. Schaffner-Bielich and A. Mishra, Properties of D-mesons in nuclear matter within a self-consistent coupled-channel approach, Phys. Rev. C 70 (2004) 025203 [nucl-th/0404064].
- [19]L. Tolos, J. Schaffner-Bielich and H. Stoecker, In-medium effects at FAIR, Phys. Lett. B 635 (2006) 85 [nucl-th/0509054].DOI
- [20]T. Mizutani and A. Ramos, D mesons in nuclear matter: A DN coupled-channel equations approach, Phys. Rev. C 74 (2006) 065201 [hep-ph/0607257].DOI
- [21]L. Tolos, A. Ramos and T. Mizutani, Open charm in nuclear matter at finite temperature, Phys. Rev. C 77 (2008) 015207 [0710.2684].DOI
- [22]R. Molina, D. Gamermann, E. Oset and L. Tolos, Charm and hidden charm scalar mesons in the nuclear medium, Eur. Phys. J. A 42 (2009) 31 [0806.3711].DOI
- [23]L. Tolos, C. Garcia-Recio and J. Nieves, The Properties of D and D* mesons in the nuclear medium, Phys. Rev. C 80 (2009) 065202 [0905.4859].DOI
- [24]L. Tolos and J.M. Torres-Rincon, D-meson propagation in hot dense matter, Phys. Rev. D 88 (2013) 074019 [1306.5426].DOI
- [25]L. Tolos, Charming mesons with baryons and nuclei, Int. J. Mod. Phys. E 22 (2013) 1330027 [1309.7305].DOI
- [26]C. Sasaki, Fate of charmed mesons near chiral symmetry restoration in hot matter, Phys. Rev. D 90 (2014) 114007 [1409.3420].DOI
- [27]S. Reddy P., A. Jahan C. S., N. Dhale, A. Mishra and J. Schaffner-Bielich, D mesons in strongly magnetized asymmetric nuclear matter, Phys. Rev. C 97 (2018) 065208 [1712.07997].DOI
- [28]T. Buchheim, T. Hilger, B. Kämpfer and S. Leupold, Chiral-partner D mesons in a heat bath within QCD sum rules, J. Phys. G 45 (2018) 085104 [1801.01472].DOI
- [29]M. Albaladejo, J.M. Nieves and L. Tolos, DD−∗ scattering and χc1(3872) in nuclear matter, Phys. Rev. C 104 (2021) 035203 [2102.08589].DOI
- [30]V. Montesinos, M. Albaladejo, J. Nieves and L. Tolos, Properties of the Tcc(3875)+ and T¯c c¯ (3875)− and their heavy-quark spin partners in nuclear matter, Phys. Rev. C 108 (2023) 035205 [2306.17673].
- [31]V. Montesinos, M. Albaladejo, J. Nieves and L. Tolos, Charge-conjugation asymmetry and molecular content: The Ds0∗(2317)± in matter, Phys. Lett. B 853 (2024) 138656 [2403.00451].DOI
- [32]E. Hernandez and E. Oset, Many body modes of antiproton annihilation tested with anti-proton production, Z. Phys. A 341 (1992) 201.
- [33]V.K. Magas, L. Roca and E. Oset, The phi meson width in the medium from proton induced phi production in nuclei, Phys. Rev. C 71 (2005) 065202 [nucl-th/0403067].DOI
- [34]M. Kaskulov, E. Hernandez and E. Oset, Inclusive omega photoproduction from nuclei and omega in the nuclear medium, Eur. Phys. J. A 31 (2007) 245 [nucl-th/0601007].
- [35]K. Garrow et al., Nuclear transparency from quasielastic A(e,e-prime p) reactions up to Q**2 = 8.1-(GeV/c)**2, Phys. Rev. C 66 (2002) 044613 [hep-ex/0109027].
- [36]P. Lava, M.C. Martinez, J. Ryckebusch, J.A. Caballero and J.M. Udias, Nuclear transparencies in relativistic A(e, e-prime p) models, Phys. Lett. B 595 (2004) 177 [nucl-th/0401041].
- [37]CBELSA/TAPS collaboration, Transparency ratio in γA→η′A and the in-medium η′ width, Phys. Lett. B 710 (2012) 600 [1204.2914].
- [38]CLAS collaboration, Measurement of transparency ratios for protons from short-range correlated pairs, Phys. Lett. B 722 (2013) 63 [1212.5343].
- [39]L. Tolos, R. Molina, E. Oset and A. Ramos, K̄∗ meson in dense matter, Phys. Rev. C 82 (2010) 045210 [1006.3454].DOI
- [40]T. Ishikawa et al., phi photo-production from Li, C, Al, and Cu nuclei at E(gamma) = 1.5-GeV to 2.4-GeV, Phys. Lett. B 608 (2005) 215 [nucl-ex/0411016].DOI
- [41]D. Cabrera, L. Roca, E. Oset, H. Toki and M.J. Vicente Vacas, Mass dependence of inclusive nuclear phi photoproduction, Nucl. Phys. A 733 (2004) 130 [nucl-th/0310054].DOI
- [42]P. Fernandez de Cordoba, Y. Ratis, E. Oset, J. Nieves, M.J. Vicente-Vacas, B. Lopez-Alvaredo et al., Projectile delta excitation in alpha - proton scattering, Nucl. Phys. A 586 (1995) 586.DOI
- [43]H. De Vries, C. De Jager and C. De Vries, Nuclear charge-density-distribution parameters from elastic electron scattering, Atomic Data and Nuclear Data Tables 36 (1987) 495.
- [44]M. Siddikov and I. Schmidt, Exclusive photoproduction of D-meson pairs with large invariant mass, Phys. Rev. D 108 (2023) 096031 [2309.09748].arxiv.org/abs/2309.09748
- [45]GlueX collaboration, First Measurement of Near-Threshold J/ψ Exclusive Photoproduction off the Proton, Phys. Rev. Lett. 123 (2019) 072001 [1905.10811].DOI
- [46]A. Accardi et al., Strong Interaction Physics at the Luminosity Frontier with 22 GeV Electrons at Jefferson Lab, 2306.09360.
- [47]R. Abdul Khalek et al., Science Requirements and Detector Concepts for the Electron-Ion Collider: EIC Yellow Report, Nucl. Phys. A 1026 (2022) 122447 [2103.05419].
- [48]D.P. Anderele et al., Electron-ion collider in China, Front. Phys. (Beijing) 16 (2021) 64701 [2102.09222].


