betaFeedback

WorksPhysics and Astronomy

Realizing One-dimensional Metallic States in Graphene via Periodically Coupled Zeroth Pseudo-Landau Levels

Abstract

Strain-induced pseudo-magnetic fields can mimic real magnetic fields to generate a zero-magnetic-field analogue of the Landau levels (LLs), i.e., the pseudo-LLs, in graphene. The distinct nature of the pseudo-LLs enables one to realize novel electronic states beyond that can be feasible with real LLs. Here, we report the realization of one-dimensional (1D) metallic states, which can be described well by the Su-Schrieffer-Heeger model, in graphene via periodically coupled zeroth pseudo-LLs. In our experiment, nanoscale strained structures embedded with pseudo-LLs are generated periodically along 1D channel of suspended graphene monolayer. Our experiments demonstrate that the zeroth pseudo-LLs of these strained structures are coupled to form metallic states, exhibiting a serpentine pattern that snakes back and forth along the 1D suspended graphene monolayer. These results are verified theoretically by large-scale tight-binding calculations of the strained samples. Our result provides a new pathway to realize novel quantum states and engineer the electronic properties of graphene by using the localized pseudo-LLs as building blocks.

A non-uniform strain in graphene can create pseudo-magnetic fields (PMFs), which generate a unique Landau quantization at zero external magnetic field [1, 2, 3, 4, 5, 6]. By tuning deformed structure of graphene, the PMFs can be changed from zero to hundreds of Tesla, providing an efficient way to tailor electronic properties of graphene [7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24]. Therefore, throughout the last ten years many efforts have been made to introduce custom-designed strained structures [25, 26, 27, 28] and PMFs in graphene [7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24]. Even more interestingly, the different nature between the PMFs and the real magnetic fields enables one to realize novel quantum states that cannot be realized purely with the real magnetic fields [14, 15, 16, 17, 18, 19, 23]. For example, a special valley-polarized Landau quantization was observed in strained graphene because the PMFs point in opposite directions at the two different valleys of graphene [14, 19]. The strain-induced pseudo-Landau levels (pseudo-LLs), which are also quite different from real LLs, only depend on the deformed structure of graphene and, thus, can be localized at nanoscale. In this Letter, by taking advantage of the nanoscale localization of the pseudo-LLs, we demonstrated for the first time that it is possible to use the pseudo-LLs as the building block to realize a model system exhibiting novel quantum states. We realized one-dimensional (1D) metallic states, which can be described well by the Su-Schrieffer-Heeger (SSH) model [29, 30], via periodically coupled zeroth pseudo-LLs in graphene. These robust 1D SSH metallic states in graphene were directly visualized in our scanning tunneling microscopy (STM) measurements and justified by a full tight-binding calculation.

In our experiment, nanoscale strained structures are generated periodically along 1D channel of suspended graphene monolayer. To obtain the 1D channel of suspended graphene monolayer, we adopted an etching technique of graphene using high-flow of hydrogen and metallic nanoparticles [31, 32, 33, 34, 35, 36, 37]. According to our STM measurements, the width of the 1D channels, which is determined by the diameter of the metallic nanoparticles, ranges from a few nanometers to several tens nanometers (Fig. S1). Two types of the 1D channels are obtained after the etching processes, as summarized in Figure 1. The first one is that the topmost graphene is etched and 1D nanoscale trench with atomic-scale sharp edges of the topmost graphene is obtained, as shown in Figure 1(a) and the first type of the 11D channels is that the underlying graphene layers are etched, leaving the topmost graphene layer untouched, as shown in Figure 1(b) and Figure 1(e). The two types of the 11D channels are quite different in the heights of the trenches and the strengths of the intervalley scattering around them, as shown in Figure 1(d), Figure 1(f) and Fig. S1. Therefore, it is quite easy to distinct them in the experiment. In this work, we mainly focused on the second type of the channels because that it provides 11D nanoscale suspended graphene monolayer, which is vital to realize 11D periodic strained structures, as illustrated subsequently.

Schematic images and STM images of etched graphene edges and channels

Figure 1. (a) Schematic image of the top layer etched edges. (b) Schematic image of the bottom layer etched channel. (c) A STM topographical image of the sharp edges, Vs=1.4V_s = 1.4 V, I=0.6I = 0.6 nA. Inset: the height profile across the edge. Scale bar: 50 nm. (d) Left: the zoom-in atomic image of the square area in (c), Vs=0.4V_s = 0.4 V, I=0.5I = 0.5 nA. Scale bar: 2 nm. Right: The fast Fourier transform (FFT) image of one edge. The six outer spots are reciprocal lattices of graphene. The inner (3×3)(\sqrt{3} \times\sqrt{3}) R30∘^\circ pattern is induced by intervalley scattering from the edge. Scale bar: 3.5 nm−1^{-1}. (e) A Typical STM image of the bottom etched smooth channel, Vs=−0.8V_s = -0.8 V, I=0.2I = 0.2 nA. Scale bar: 10 nm. (f) Left: the zoom-in image of the square area in (e), Vs=0.6V_s = 0.6 V, I=0.1I = 0.1 nA. Scale bar: 2 nm. Right: The FFT image of the top panel. The six spots are reciprocal lattice of graphene. Scale bar: 3.5 nm−1^{-1}.

For most of the 11D suspended graphene membrane (the 11D structure above large Ni terraces or multilayer graphene terraces), the length is over several hundreds of nanometers and there is no observable strained structure (Fig. S1), indicating that the supporting substrate does not introduce stress on the 11D suspended structure even though there are different thermal expansion coefficients between the topmost graphene monolayer and the substrate. However, for the 11D suspended graphene monolayer above terraces with small widths (see Figs. S2 and S3 for more experimental characterizations), we observed clear strained structures along the 11D structure, as shown in Figure 2(a)-Figure 2(c). In this case, the 11D suspended graphene monolayer is suddenly cut off at the edges of the terraces and, therefore, the length of the 11D structure is relatively short. The two ends at the edges of the terraces may introduce strain in the short 11D suspended graphene monolayer and, consequently, generate periodic strained structures along it (see Fig. S4 for more experimental data), as shown in Figure 2(b).

3D STM images, spectra, and pseudo-magnetic field distribution

Figure 2. (a) A 3D STM image of etched channels on continuous steps marked by yellow arrows, Vs=−1.8V_s = -1.8 V, I=0.1I = 0.1 nA. Scale bar: 20 nm. (b) Two-dimensional projection of the longest channel in (a), Vs=0.05V_s = 0.05 V, I=0.015I = 0.015 nA. Scale bar: 10 nm. Inset: the height profile along the black arrow. (c) The zoom-in image of the black dashed square in (b). Scale bar: 3 nm. (d) The dI/dV\mathrm{d}I/\mathrm{d}V spectra taken around the center (top) and edge (bottom) of the ripple. The corresponding positions are marked by the purple and black dots in (c). (e) The distribution of PMFs along the 1D channel, showing the same period as the ripples.

In strained graphene, lattice deformation can effectively modulate electron hopping and create pseudo-LLs around Dirac point of graphene. The strain-induced pseudo-LLs can be explicitly demonstrated by scanning tunneling spectroscopy (STS) measurements in which the pseudo-LLs are clearly observed as pronounced peaks [7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24]. Figure 2(d) shows representative STS spectra acquired on different positions of a strained structure in the 11D suspended graphene monolayer (marked in Figure 2(c)). The four pronounced peaks in the spectra are attributed to the strain-induced pseudo-LLs, which can be fitted well by the Landau quantization of massless Dirac fermions in graphene monolayer (see Fig. S3). In our experiment, a robust zeroth pseudo-LL, exhibiting a large full width about 0.2 eV, is observed in all the spectra of the strained graphene and the signals of high pseudo-LLs with LL index n≠0n \ne0 are much weaker. Theoretically, the description of strained graphene as an effective PMF is exactly valid only at the charge neutrality point and fails at higher energies [14]. Therefore, the high pseudo-LLs are not well defined and, consequently, much weaker in the spectra. To measure the spatial distribution of the PMFs, STS spectra at different positions of the 1D suspended graphene monolayer are carefully measured. The values of the PMFs in each position of the strained structures can be obtained according to the fitting of the Landau quantization of massless Dirac fermions. Figure 2(e) shows distribution of the PMFs measured around four strained ripples along the 1D suspended graphene monolayer. Obviously, the PMFs are quite non-uniform and show similar period as the strained structures along the 1D structure.

To further explore effects of the quasi-periodic distributed PMFs on electronic properties of the 1D suspended graphene monolayer, conductance maps, which reflect spatial-distributed local density of states (LDOS), at different energies are measured, as shown in Figure 3(a)-(Figure 3c) (see Fig. S5 for maps at other energies). At energies, both positive and negative, far away from the zeroth pseudo-LL, there is almost no observable feature induced by the strained structures in the 1D suspended graphene monolayer (Figure 3 (c)). By reducing the energy to close to the zeroth pseudo-LL, strain-induced electronic states, which are mainly localized in the strained structures, are clearly observed along the 1D structure (Figure 3(a)). At the zeroth pseudo-LL, we observed a serpentine pattern that snakes back and forth along the 1D suspended graphene monolayer, which reminds us the 1D SSH metallic states observed in graphene nanoribbons very recently [38, 39, 40]. Such a result indicates that the zeroth pseudo-LLs at different strained structures are coupled to form a 1D metallic state.

dI/dV maps measured experimentally and theoretically calculated

Figure 3. The dI/dVdI/dV maps measured at the energy of (a) -0.1 eV, (b) 0.05 eV and 0.1 eV (around zero pseudo-LL), (c) 0.4 eV and 0.6 eV, respectively. (d)-(f) Theoretical calculated dI/dVdI/dV maps at the corresponding energies of -0.1 eV, 0.05 eV, 0.1 eV, 0.4 eV and 0.5 eV. The Dirac point is shifted to zero energy. Scale bar: 10 nm.

The serpentine zeroth pseudo-LLs in the 1D suspended graphene are further verified in theory by utilizing a large-scale propagation method in the frame of tight-binding model. The strained graphene used in the calculation is composed of transverse (xx) buckling and longitudinal (yy) ripples (see SI Note 9 and Fig. S6 for details). The out-of-plane displacement of the strained structure along the 1D suspended graphene monolayer is modelled by a sinusoidal function. We vary five setting parameters of buckling and ripples to mimic the strained structure in Figure 2(b), and obtain the structure 1 in Figure 4(a) (SI Note 9). The distortion-induced strain is defined as ε=(∑idi3d−1)×100%\varepsilon= \left(\frac{\sum_i d_i}{3d}-1\right)\times100\% with did_i (i=1,2,3i=1,2,3) the first neighbor interatomic distance in the deformed lattice and d=0.142d=0.142 nm the distance between carbon atoms in equilibrium. As illustrated in Figure 4(b), the ε\varepsilon shows a periodicity and with the maximum value around 4% located around the crossover (ripple head) of the buckling and ripples. The strength of the strain-induced PMFs in the 1D suspended graphene monolayer are evaluated in Figure 4(c). The PMFs vary at different positions and exhibit the same period as the strained structure, which is in good agreement with the experimental results. The strain-induced PMFs also strongly modify electronic properties of the 1D suspended graphene monolayer. Figure 4(d) shows representative LDOS at two different positions of the strained structure. The strain-induced pseudo-LLs can be explicitly identified, as observed in our experiment. To further compare with the experimental result, we calculated energy-fixed LDOS of the 1D suspended graphene monolayer, as shown in Figure 3(d)-(Figure 3f). Similar to the experimental results, the 1D metallic states, exhibiting a serpentine pattern, are only observed at the zeroth pseudo-LL energy.

Schematic representation and calculated properties of strained graphene structures

Figure 4. (a) Schematic representation of the calculated graphene monolayer embedded with buckling and periodic ripples that have crests at an angle to the trench. The inset shows the sample has an armchair configuration along the channel. (b) and (e) Contour plots of the calculated average strain ε\varepsilon of the strained graphene structures 1 and 2, respectively. The pink areas denote the ranges of strain of two structures. (c) and (f) Calculated pseudo-magnetic field of structure 1 and 2, respectively. (d) and (g) Calculated local DOS of point 1 and point 2 along the ripple of structure 1 and 2, respectively. The corresponding positions are marked by the black and red dots in (a). (h) Top panel: Schematic representation of an effective SSH model to describe the strained graphene. A and B are two sublattices for a herringbone chain and tt is the effective hopping between them. Bottom panel: Diagram of effective hopping tt between two localized states (named pLL0_0) in graphene.

In the strained structures of the 1D suspended graphene layer, the maximum value of strain exists near the ripple head and the maximum response of the LDOS is around the highest point of the ripple. Consequently, this strain induced serpentine pattern can be understood by a low-energy effective SSH tight-binding model [29, 30]. The dispersion relationship of the two-sublattice system in the SSH model is described as E±(k)=±∣t1∣2+∣t2∣2+2∣t1∣∣t2∣cos⁡(k+δ)E_{\pm}(k)=\pm\sqrt{|t_1|^2+|t_2|^2+2|t_1||t_2|\cos(k+\delta)}, where δ\delta is the relative phase between two effective hopping terms t1t_1 and t2t_2. When t1=t2=tt_1=t_2=t, a metallic state forms in the chain. In our experiment, the staggered strained structures mimic different sublattices and the robust pseudo-LLs contribute to the localized zero modes. The overlap of the adjacent zero-mode states with equal hopping parameters t1=t2≈50t_1=t_2\approx50 meV leads to an enlarged SSH metallic chain in the channel in Figure 3 (here the bottom of zero pseudo-LLs are defined as the effective band width in Figure 2(d), Figure 4(d) and Figure 4(g)). The enlarged SSH chain in Figure 4(a) has two features. One is the symmetry, which ensures that the effective hopping tt (illustrated in Figure 4(h)) is identical between zeroth pseudo-LLs (see Fig. S8 for asymmetric ripples). The other is the varied amplitude, which excludes the possibility of connecting states localized in the ripples to form a snake-like pattern (Figs. S7 and S9).

To further explore effect of strain near the ripple head on the width of the zeroth pseudo-LLs as well as the effective hopping tt, we carried out more calculation by reducing the strain near the ripple head with decreasing 25% of the amplitude of ripple head (other method is to modulate the buckling in SI Note 14), as shown in Figure 4(e) of structure 2. The PMF of this structure, as shown in Figure 4(f), shows lower intensity and the width of zero-mode increases from 180 meV to 250 meV with the corresponding hopping tt changing from 50 meV to 62.5 meV (LDOS in Figure 4(g) and serpentine pattern in Fig. S10). This tendency can be inspired by the changes of nearest-neighbor hopping interactions near the ripple head. In the strained structures of the suspended graphene monolayer, localized states appear in both sub-lattice A and B of graphene (loss of sublattice polarization), the band width is determined by the effective hopping tt between adjacent zero modes, which is proportional to the nearest neighbor hopping amplitude of graphene. In fact, the effective hopping t=50t = 50~62.5 meV is inside the energy range 5.2~120 meV with the minimum value corresponding to infinite did_i and the maximum value corresponding to di=dd_i = d [40]. With increasing the strain, the band is flattened due to the reduced effective hopping strength.

In summary, by taking advantage of the nanoscale localization of the pseudo-LLs, we demonstrated the realization of the 1D SSH metallic states in graphene by using the strain-induced pseudo-LLs as the building block. Via STM and STS measurements, we directly image the 1D metallic states realized by periodic coupled zeroth pseudo-LLs along the 1D suspended graphene monolayer. Our result provides a new avenue to build custom-designed model systems with novel quantum phases by using nanoscale localized pseudo-LLs.

Acknowledgements

This work was supported by the National Natural Science Foundation of China (Grant Nos. 11974050, 11674029, 11921005, 11774269, 12047543) and National Key R and D Program of China (Grant No. 2017YFA0303301, 2018YFA0305800). L.H. also acknowledges support from the National Program for Support of Top-notch Young Professionals, support from “the Fundamental Research Funds for the Central Universities”, and support from “Chang Jiang Scholars Program”. Numerical calculations presented in this paper were performed on the supercomputing system in the Supercomputing Center of Wuhan University.

Figures

References

  1. [1]M. A. Vozmediano, M. Katsnelson, and F. Guinea, Gauge fields in graphene, Phys. Rep. 496, 109 (2010).DOI
  2. [2]F. Guinea, B. Horovitz, and P. Le Doussal, Gauge field induced by ripples in graphene, Phys. Rev. B 77, 205421 (2008).DOI
  3. [3]F. Guinea, M. Katsnelson, and M. Vozmediano, Midgap states and charge inhomogeneities in corrugated graphene, Phys. Rev. B 77, 075422 (2008).
  4. [4]F. Guinea, M. Katsnelson, and A. Geim, Energy gaps and a zero-field quantum Hall effect in graphene by strain engineering, Nat. Phys. 6, 30 (2010).DOI
  5. [5]S. Zhu, J. A. Stroscio, and T. Li, Programmable extreme pseudomagnetic fields in graphene by a uniaxial stretch, Phys. Rev. Lett. 115, 245501 (2015).DOI
  6. [6]B. Amorim, A. Cortijo, F. De Juan, A. G. Grushin, F. Guinea, A. Gutiérrez-Rubio, H. Ochoa, V. Parente, R. Roldán, and P. San-Jose, Novel effects of strains in graphene and other two dimensional materials, Phys. Rep. 617, 1 (2016).DOI
  7. [7]N. Levy, S. Burke, K. Meaker, M. Panlasigui, A. Zettl, F. Guinea, A. C. Neto, and M. F. Crommie, Strain-induced pseudo–magnetic fields greater than 300 tesla in graphene nanobubbles, Science 329, 544 (2010).DOI
  8. [8]D. Guo, T. Kondo, T. Machida, K. Iwatake, S. Okada, and J. Nakamura, Observation of Landau levels in potassium-intercalated graphite under a zero magnetic field, Nat. Commun. 3, 1068 (2012).DOI
  9. [9]J. Lu, A. C. Neto, and K. P. Loh, Transforming moiré blisters into geometric graphene nano-bubbles, Nat. Commun. 3, 823 (2012).DOI
  10. [10]H. Yan, Y. Sun, L. He, J.-C. Nie, and M. H. Chan, Observation of Landau-level-like quantization at 77 K along a strained-induced graphene ridge, Phys. Rev. B 85, 035422 (2012).DOI
  11. [11]W. Yan, W.-Y. He, Z.-D. Chu, M. Liu, L. Meng, R.-F. Dou, Y. Zhang, Z. Liu, J.-C. Nie, and L. He, Strain and curvature induced evolution of electronic band structures in twisted graphene bilayer, Nat. Commun. 4, 2159 (2013).DOI
  12. [12]L. Meng, W.-Y. He, H. Zheng, M. Liu, H. Yan, W. Yan, Z.-D. Chu, K. Bai, R.-F. Dou, and Y. Zhang, Strain-induced one-dimensional Landau level quantization in corrugated graphene, Phys. Rev. B 87, 205405 (2013).DOI
  13. [13]A. Georgi, P. Nemes-Incze, R. Carrillo-Bastos, D. Faria, S. Viola Kusminskiy, D. Zhai, M. Schneider, D. Subramaniam, T. Mashoff, and N. M. Freitag, Tuning the pseudospin polarization of graphene by a pseudomagnetic field, Nano Lett. 17, 2240 (2017).DOI
  14. [14]S.-Y. Li, Y. Su, Y.-N. Ren, and L. He, Valley polarization and inversion in strained graphene via pseudo-Landau levels, valley splitting of real Landau levels, and confined states, Phys. Rev. Lett. 124, 106802 (2020).DOI
  15. [15]X. Zong, H. Hu, G. Ouyang, J. Wang, R. Shi, L. Zhang, Q. Zeng, C. Zhu, S. Chen, and C. Cheng, Tailoring sample-wide pseudo-magnetic fields on a graphene–black phosphorus heterostructure, Nat. Nanotechnol. 13, 828 (2018).
  16. [16]P. Jia, W. Chen, J. Qiao, M. Zhang, X. Zheng, Z. Xue, R. Liang, C. Tian, L. He, and Z. Di, Programmable graphene nanobubbles with three-fold symmetric pseudo- magnetic fields, Nat. Commun. 10, 3127 (2019).DOI
  17. [17]P. Nigge, A. Qu, É. Lantagne-Hurtubise, E. Marsell, S. Link, G. Tom, M. Zonzo, M. Michiardi, M. Schneider, and S. Zhdanovich, Room temperature strain-induced Landau levels in graphene on a wafer-scale platform, Sci. Adv. 5, eaaw5593 (2019).DOI
  18. [18]Y. Jiang, J. Mao, J. Duan, X. Lai, K. Watanabe, T. Taniguchi, and E. Y. Andrei, Visualizing strain-induced pseudomagnetic fields in graphene through an hBN magnifying glass, Nano Lett. 17, 2839 (2017).DOI
  19. [19]S.-Y. Li, K.-K. Bai, L.-J. Yin, J.-B. Qiao, W.-X. Wang, and L. He, Observation of unconventional splitting of Landau levels in strained graphene, Phys. Rev. B 92, 245302 (2015).DOI
  20. [20]C.-C. Hsu, M. Teague, J.-Q. Wang, and N.-C. Yeh, Nanoscale strain engineering of giant pseudo-magnetic fields, valley polarization, and topological channels in graphene, Sci. Adv. 6, eaat9488 (2020).DOI
  21. [21]H. Shi, Z. Zhan, Z. Qi, K. Huang, E. van Veen, J. Á. Silva-Guillén, R. Zhang, P. Li, K. Xie, and H. Ji, Large-area, periodic, and tunable intrinsic pseudo-magnetic fields in low-angle twisted bilayer graphene, Nat. Commun. 11, 371 (2020).DOI
  22. [22]D.-H. Kang, H. Sun, M. Luo, K. Lu, M. Chen, Y. Kim, Y. Jung, X. Gao, S. J. Parluhutan, and J. Ge, Pseudo-magnetic field-induced slow carrier dynamics in periodically strained graphene, Nat. Commun. 12, 5087 (2021).DOI
  23. [23]J. Mao, S. P. Milovanović, M. Anđelković, X. Lai, Y. Cao, K. Watanabe, T. Taniguchi, L. Covaci, F. M. Peeters, and A. K. Geim, Evidence of flat bands and correlated states in buckled graphene superlattices, Nature 584, 215 (2020).
  24. [24]R. Banerjee, V.-H. Nguyen, T. Granzier-Nakajima, L. PabbI, A. Lherbier, A. R. Binion, J.-C. Charlier, M. Terrones, and E. W. J. N. I. Hudson, Strain modulated superlattices in graphene, Nano Lett. 20, 3113 (2020).DOI
  25. [25]W. Bao, F. Miao, Z. Chen, H. Zhang, W. Jang, C. Dames, and C. N. Lau, Controlled ripple texturing of suspended graphene and ultrathin graphite membranes, Nat. Nanotechnol. 4, 562 (2009).
  26. [26]L. Tapasztó, T. Dumitrică, S. J. Kim, P. Nemes-Incze, C. Hwang, and L. P. J. N. p. Biró, Breakdown of continuum mechanics for nanometre-wavelength rippling of graphene, Nat. Phys. 8, 739 (2012).DOI
  27. [27]L. Meng, Y. Su, D. Geng, G. Yu, Y. Liu, R.-F. Dou, J.-C. Nie, and L. He, Hierarchy of graphene wrinkles induced by thermal strain engineering, Appl. Phys. Lett 103, 251610 (2013).DOI
  28. [28]K.-K. Bai, Y. Zhou, H. Zheng, L. Meng, H. Peng, Z. Liu, J.-C. Nie, and L. He, Creating one-dimensional nanoscale periodic ripples in a continuous mosaic graphene monolayer, Phys. Rev. Lett. 113, 086102 (2014).DOI
  29. [29]W. P. Su, J. Schrieffer, and A. J. Heeger, Solitons in polyacetylene, Phys. Rev. Lett. 42, 1698 (1979).DOI
  30. [30]W. P. Su, J. Schrieffer, and A. J. Heeger, Soliton excitations in polyacetylene, Phys. Rev. B Condens. Matter 22, 2099 (1980).
  31. [31]L. Ci, Z. Xu, L. Wang, W. Gao, F. Ding, K. F. Kelly, B. I. Yakobson, and P. M. Ajayan, Controlled nanocutting of graphene, Nano Res. 1, 116 (2008).DOI
  32. [32]L. C. Campos, V. R. Manfrinato, J. D. Sanchez-Yamagishi, J. Kong, and P. Jarillo-Herrero, Anisotropic etching and nanoribbon formation in single-layer graphene, Nano Lett. 9, 2600 (2009).DOI
  33. [33]N. Severin, S. Kirstein, I. Sokolov, and J. Rabe, Rapid trench channeling of graphenes with catalytic silver nanoparticles, Nano Lett. 9, 457 (2009).DOI
  34. [34]M. Lukas, V. Meded, A. Vijayaraghavan, L. Song, P. M. Ajayan, K. Fink, W. Wenzel, and R. Krupke, Catalytic subsurface etching of nanoscale channels in graphite, Nat. Commun. 4, 1379 (2013).DOI
  35. [35]L. Chen, L. He, H. S. Wang, H. Wang, S. Tang, C. Cong, H. Xie, L. Li, H. Xia, T. Li, T. Wu, D. Zhang, L. Deng, T. Yu, X. Xie, and M. Jiang, Oriented graphene nanoribbons embedded in hexagonal boron nitride trenches, Nat. Commun. 8, 14703 (2017).DOI
  36. [36]H. S. Wang, L. Chen, K. Elibol, L. He, H. Wang, C. Chen, C. Jiang, C. Li, T. Wu, C. X. Cong, T. J. Pennycook, G. Argentero, D. Zhang, K. Watanabe, T. Taniguchi, W. Wei, Q. Yuan, J. C. Meyer, and X. Xie, Towards chirality control of graphene nanoribbons embedded in hexagonal boron nitride, Nat. Mater. 20, 202 (2020).DOI
  37. [37]R. Yang, L. Zhang, Y. Wang, Z. Shi, D. Shi, H. Gao, E. Wang, and G. Zhang, An anisotropic etching effect in the graphene basal plane, Adv. Mater. 22, 4014 (2010).DOI
  38. [38]D. J. Rizzo, G. Veber, T. Cao, C. Bronner, T. Chen, F. Zhao, H. Rodriguez, S. G. Louie, M. F. Crommie, and F. R. Fischer, Topological band engineering of graphene nanoribbons, Nature 560, 204 (2018).DOI
  39. [39]O. Gröning, S. Wang, X. Yao, C. A. Pignedoli, G. B. Barin, C. Daniels, A. Cupo, V. Meunier, X. Feng, and A. Narita, Engineering of robust topological quantum phases in graphene nanoribbons, Nature 560, 209 (2018).DOI
  40. [40]D. J. Rizzo, G. Veber, J. Jiang, R. McCurdy, T. Cao, C. Bronner, T. Chen, S. G. Louie, F. R. Fischer, and M. F. Crommie, Inducing metallicity in graphene nanoribbons via zero-mode superlattices, Science 369, 1597 (2020).DOI

Paper details

vlnc:W_75ss2qgw
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents