betaFeedback

WorksMathematics

LithoSAGE: Spatially Adaptive and Geometrically Equivariant Neural Operators for Computational Lithography

Abstract

Operator learning offers an efficient surrogate for lithography simulation, replacing costly numerical solutions with direct model inference. However, existing learning architectures are not designed to simultaneously provide geometric equivariance and adaptability to layout windows with different physical extents, and thus their generalization capability is limited. To address this problem, we propose LithoSAGE, a spatially adaptive and geometrically equivariant neural operator method trained on lithography data. Within its basic Fourier neural operator architecture, spectral weights are expressed as continuous functions of normalized radial frequency through a learnable sum of Gaussians. This representation preserves the geometric properties of the lithography system and incorporates rotation and translation equivariance, spatial interaction decay, and direct evaluation on different layout windows. Experiments predict aerial images from mask layouts and resist images from aerial images, demonstrating the geometric equivariance and spatial adaptivity of LithoSAGE. Comparisons with other architectures also assess prediction errors and parameter efficiency.

Introduction

Pattern transfer by lithography is a central step in semiconductor manufacturing. Lithography simulation follows the conversion of a mask layout into a printed pattern through an optical process and a photoresist process [34]. In the optical model, the mask transmission function and illumination source determine the aerial image, the intensity distribution within the photoresist. The resist model then converts this aerial image into a virtual continuous resist image; thresholding or contour extraction gives the printed pattern [31, 33]. Diffraction, partial coherence, illumination conditions, and the projection pupil govern the optical transfer of mask features [20]. The resist model describes the ensuing exposure, post-exposure bake, diffusion, chemical reactions, and development that produce the resist contour [7, 32]. During calibration and mask optimization, these simulations are repeated for each layout clip and process setting. Accounting for all the physical effects increases their computational cost [28, 41]. Practical simulators therefore often use calibrated compact process models, in which empirical nonlinear transformations represent detailed resist effects before thresholding or contour extraction [36, 9, 3, 14]. The resulting sequence of spatial fields makes lithography simulation a natural application of operator learning.

Learning nonlinear mappings between function spaces from data is the central aim of operator learning [23, 37]. When such a mapping comes from a physical model that is costly to evaluate repeatedly, its learned approximation can provide an efficient surrogate. Representative methods include Graph Kernel Network (GKN) [24], the Deep Operator Network (DeepONet) [30], and Fourier neural operator (FNO) [25]. GKN approximates kernel integral operators by message passing on graphs. Motivated by the universal approximation theorem for nonlinear operators, DeepONet combines coefficients from a branch network with basis functions from a trunk network. FNO instead parameterizes integral kernels in Fourier space, enabling efficient spectral convolution on regular grids. Later developments use other representations and physical information. The Multiwavelet Transform Operator (MWT) approximates operator kernels with multiwavelets [16], while the Wavelet Neural Operator (WNO) learns localized representations through wavelet transforms [38]. General Neural Operator Transformer (GNOT) uses heterogeneous normalized attention to handle multiple input functions and irregular meshes [17]. For Helmholtz problems, the Neumann Series Neural Operator (NSNO) uses a U-Net to capture multiscale features [4]. The Physics-Informed Neural Operator (PINO) includes governing equations in operator learning [26], and PINTO addresses representations on complex geometries [2]. Multi-scale Fourier Neural Operator (MscaleFNO) employs parallel scaled FNO branches for highly oscillatory mappings [47, 48]. Other recent methods introduce structured long-range interactions. LSR-Net separates long-range and short-range components and represents the former with an exponential Fourier multiplier [21]. E-FNO augments Fourier computation with a nonlocal kernel expressed as a sum of exponentials [29].

The optical imaging mapping and the subsequent resist process mapping place lithography simulation naturally within operator learning [43]. Many data-driven lithography methods nevertheless use fixed grids and treat the task as image regression. LithoGAN translates mask patterns into resist patterns with a conditional generative adversarial network (GAN) [45]. Deep Agile Mask Optimization (DAMO) combines a deep lithography simulator, a deep mask generator, and layout splitting to optimize masks over complete chip layouts [5]. To represent nonlocal optical coupling between layout features, more recent models incorporate global interactions. The Dual-Band Optics-Inspired Neural Network (DOINN) combines an optimized Fourier unit that mimics frequency-domain optical computation with a convolutional local path that recovers high-frequency layout details [41]. The Convolutional Fourier Neural Operator (CFNO) applies a shared FNO to layout tokens and convolves across tokens for efficient mask optimization at large scale [42]. LithoBench supplies circuit layout tiles and an evaluation framework for benchmarking learning methods in lithography simulation and mask optimization [51].

A practical lithography surrogate needs more than accurate predictions on a fixed layout window. Its response should remain consistent when a pattern changes orientation or position, with mask and source rotated jointly for the optical mapping. It should also operate on windows of different physical extents and reflect the relevant decay behavior. Rotation equivariance means that rotating the input field gives the corresponding rotation of the output, provided the optical or resist process has that rotational symmetry. Translation equivariance means that shifting the input shifts the aerial or resist image by the same amount, subject to boundary effects. Spatial adaptivity is the ability to use the model on layout windows with different physical extents. Decay behavior is a fourth consideration: interactions attenuate with spatial separation in the physical domain, and the spectral response attenuates toward high frequencies or the cutoff in the Fourier domain.

Prior work generally treats some of these requirements without combining all of them. In lithography, symmetry has been used to accelerate aerial image simulation and preserve optical kernel symmetry [49, 15], as well as to build compact process models invariant to geometric transformations [13]. Group-equivariant convolutional neural networks (G-CNNs) and U-Net variants impose rotation or reflection symmetries through group convolutions and shared weights [6, 11]. Group-equivariant FNOs apply related constructions to spectral layers that respect rotations, translations, and reflections [19]. With discrete rotation groups, the guarantee covers the finite set of represented rotations rather than arbitrary angles. Other neural operator approaches combine convolution and equivariant attention with FNO architectures [50], employ group averaging [8], or encode translation, rotation, reflection, and scaling for particular physical problems [40]. Transfer between computational domains and spatial resolutions has also received attention [46, 1]. These approaches, however, generally do not jointly encode decay behavior and support spatial adaptivity over layout windows with different physical extents. Large-layout lithography strategies typically split a layout into fixed-size blocks, process each block with a model or optimizer, and assemble the outputs [5, 44]. This improves scalability while retaining a dependence on models or optimizers designed for fixed-size blocks. The present work is motivated by combining rotation and translation equivariance with a continuous spectral representation that supports spatial adaptivity and introduces a structural bias toward the required decay behavior.

We propose LithoSAGE, a Spatially Adaptive and Geometrically Equivariant operator learning method for lithography simulation built on FNO. Spatial adaptivity here means applying the same learned operator to layout windows with different physical extents without retraining. Geometric equivariance concerns rotations and translations. The basic construction expresses FNO spectral weights as continuous functions of normalized radial frequency through a learnable sum-of-Gaussians (SOG) expansion. The expansion takes the place of independently assigned weights at discrete Fourier modes, while Fourier filtering continues to represent nonlocal lithographic interactions. Gaussian sums have been used to approximate interaction kernels for efficient kernel summation, convolution, and spectral computation [27, 10]. SOG-Net represented the Fourier multiplier of each convolution layer for long-range interactions by a sum of Gaussian functions with trainable amplitudes and variances, enabling different long-range behaviors of interatomic potentials [22]. In LithoSAGE, the Gaussian expansion instead represents spectral weight matrices for lithography operators. Continuity in physical frequency allows the learned function to be evaluated on the Fourier grids associated with different physical windows. The same parameters can therefore be used without defining new spectral weights for each window. Radial dependence shares weights among Fourier modes with equal radial frequency and thereby enforces rotation equivariance. Under periodic boundary conditions, Fourier filtering commutes with translations, preserving translation equivariance. The localized Gaussian components and smooth cutoff taper also regularize the spectral response and promote spatial decay of the resulting nonlocal kernels.

The contributions of this work are as follows:

  • We develop a continuous spectral parameterization using a sum of Gaussian functions. A smooth function of physical frequency represents the spectral response, so the same learned function can be evaluated across layout windows. Localized Gaussian bases and a smooth cutoff taper also encode the required decay behavior.

  • We construct radial spectral weights shared by Fourier modes of equal radial frequency. This sharing yields rotation equivariance and retains the translation equivariance of Fourier multipliers.

  • Experiments verify rotation and translation equivariance for both lithography mappings and demonstrate direct evaluation on layout windows of different physical extents. Comparisons with the other considered architectures assess prediction performance, parameter efficiency, equivariance, and transfer across physical window extents and spatial resolutions. Whereas existing methods typically cover only some of these properties, the proposed model combines them in one formulation.

The paper proceeds as follows. § 2 describes the optical and photoresist processes and formulates the two learning tasks. § 3 develops LithoSAGE, including the spectral parameterization by a sum of Gaussian functions and the associated structural design. § 4 gives the experimental setup and results. § 5 summarizes the method and the experimental findings.

Lithography Processes and Structural Requirements

In optical lithography, the mask modulates illumination from a source, and the projection system transfers the resulting field to the wafer. The aerial image is the intensity distribution formed inside the photoresist coating [34]. This distribution initiates photochemical changes in the resist. Post-exposure bake and development then produce the printed resist pattern.

The optical imaging sequence is shown in Figure 1(a). Source light first travels through the Köhler illumination system, which sets the angular distribution incident on the mask. The mask modulates the light according to the layout and generates diffracted light that passes toward the projection system. The finite numerical aperture restricts which diffraction orders the optics can collect, so only part of this light forms the wafer image. Its intensity distribution within the photoresist is the aerial image and sets the spatial exposure for the resist process that follows.

Figure 1. Schematic overview of (a) the optical model, (b) photoresist process, and (c) the field representation used in the learning tasks.

Figure 1(b) shows the photoresist process following optical imaging. The aerial image drives chemical changes during exposure, with higher intensities producing stronger responses. In a chemically amplified resist (CAR) [32, 34], exposure activates the photoacid generator and generates acid. Diffusion starts during exposure and continues during post-exposure bake (PEB). During PEB, the acid catalyzes reactions that change the local dissolution behavior. Development selectively removes material according to the resulting solubility distribution. In the field representation adopted here, the combined response is described by a continuous resist image. Thresholding or contour extraction of that field gives a binary printed pattern.

The field representation of this sequence is summarized schematically in Figure 1(c):

(m(r),S)→Ha(r)→Rphysz(r)→Bp(r).(1)\left(m(\mathbf{r}), S\right) \xrightarrow{\mathcal{H}} a(\mathbf{r}) \xrightarrow{\mathcal{R}_{\mathrm{phys}}} z(\mathbf{r}) \xrightarrow{\mathcal{B}} p(\mathbf{r}). \tag*{(1)}

The aligned spatial fields share the lateral coordinate r=(x,y)\mathbf{r}=(x,y) on a computational domain Ω⊂R2\Omega\subset\mathbb{R}^{2}. We write the mask transmission function, aerial image, resist image, and printed pattern as m(r)m(\mathbf{r}), a(r)a(\mathbf{r}), z(r)z(\mathbf{r}), and p(r)p(\mathbf{r}), respectively. Illumination is specified by the source distribution SS in normalized pupil coordinates. The optical mapping, photoresist process, and thresholding or contour extraction are denoted by H\mathcal{H}, Rphys\mathcal{R}_{\mathrm{phys}}, and B\mathcal{B}, respectively. Panel (c) shows the source and mask entering the optical model, followed by the spatial output fields. The physical models for these steps are given below.

Optical Model

The optical operator H\mathcal{H} in Eq. (1) takes a mask transmission function (MTF) m(r)m(\mathbf{r}) and a continuous source distribution S(s)S(\mathbf{s}) to the aerial image a(r)a(\mathbf{r}) inside the photoresist [12, 34]. The lateral coordinate is r=(x,y)∈Ω\mathbf{r}=(x,y)\in\Omega, as defined above, and m(r)m(\mathbf{r}) specifies the mask’s spatial transmission. The mask layout describes the arrangement of features; m(r)m(\mathbf{r}) is the transmission field used in the optical calculation. For an ideal binary amplitude mask, m(r)m(\mathbf{r}) is one in transmissive regions and zero in opaque regions. Each coordinate s=(sx,sy)\mathbf{s}=(s_x,s_y) identifies an illumination direction in normalized pupil coordinates, with source intensity density S(s)S(\mathbf{s}).

For a fixed direction of illumination s\mathbf{s}, a plane wave represents the field reaching the mask. The scalar thin mask approximation describes its local modulation by the MTF as

Uin(r;s)=e−2πifcs⋅r,U_{\mathrm{in}}(\mathbf{r};\mathbf{s})=e^{-2\pi i f_c\mathbf{s}\cdot\mathbf{r}},
Umask(r;s)=m(r)Uin(r;s)=m(r)e−2πifcs⋅r,(2)U_{\mathrm{mask}}(\mathbf{r};\mathbf{s})=m(\mathbf{r})U_{\mathrm{in}}(\mathbf{r};\mathbf{s})=m(\mathbf{r})e^{-2\pi i f_c\mathbf{s}\cdot\mathbf{r}}, \tag*{(2)}

where ii denotes the imaginary unit. The optical cutoff fc=NA/λf_c=\mathrm{NA}/\lambda is set by the numerical aperture NA and wavelength λ\lambda.

Propagation through the projection optics is described by expanding the MTF into spatial-frequency components:

m(r)=F−1[m^](r)=∫R2m^(f)e2πif⋅r df,(3)m(\mathbf{r})=\mathcal{F}^{-1}[\widehat{m}](\mathbf{r})=\int_{\mathbb{R}^{2}}\widehat{m}(\mathbf{f})e^{2\pi i\mathbf{f}\cdot\mathbf{r}}\,\mathrm{d}\mathbf{f}, \tag*{(3)}

where f=(fx,fy)\mathbf{f}=(f_x,f_y) is the spatial frequency coordinate, and m^(f)\hat{m}(\mathbf{f}) is its spectral amplitude. The transform is defined by

m^(f)=F[m](f)=∫Ωm(r)e−2πif⋅r dr.(4)\hat{m}(\mathbf{f})=\mathcal{F}[m](\mathbf{f})=\int_{\Omega}m(\mathbf{r})e^{-2\pi i\mathbf{f}\cdot\mathbf{r}}\,d\mathbf{r}. \tag*{(4)}

For illumination along s\mathbf{s}, the oblique incident plane wave shifts the mask spectrum by fcsf_c\mathbf{s} relative to the projection pupil. The same dependence on illumination can be expressed through a shifted pupil, Π(f−fcs)\Pi(\mathbf{f}-f_c\mathbf{s}). For an ideal circular pupil, this function is

Π(f)={1,∥f∥2≤fc,0,∥f∥2>fc.(5)\Pi(\mathbf{f})= \begin{cases} 1, & \lVert\mathbf{f}\rVert_2\le f_c,\\ 0, & \lVert\mathbf{f}\rVert_2>f_c. \end{cases} \tag*{(5)}

The pupil selects the diffraction components that pass through the projection system. Apart from a phase factor of unit magnitude, the coherent field at the image plane for source direction s\mathbf{s} is

Es(r;m)=F−1[m^(f)Π(f−fcs)](r),(6)E_{\mathbf{s}}(\mathbf{r};m)=\mathcal{F}^{-1}\left[\hat{m}(\mathbf{f})\Pi(\mathbf{f}-f_c\mathbf{s})\right](\mathbf{r}), \tag*{(6)}

where F−1\mathcal{F}^{-1} is the inverse Fourier transform. The intensity contributed by this illumination direction is thus ∣Es(r;m)∣2\lvert E_{\mathbf{s}}(\mathbf{r};m)\rvert^2.

The source is normalized by ∫R2S(s) ds=1\int_{\mathbb{R}^2}S(\mathbf{s})\,d\mathbf{s}=1, and S(s)=0S(\mathbf{s})=0 outside the illumination support. Under Köhler illumination, electromagnetic waves from different illumination directions are mutually incoherent. Their intensity contributions can therefore be added, giving the continuous Abbe formulation

a(r;m,S)=∫R2S(s)∣Es(r;m)∣2 ds.(7)a(\mathbf{r};m,S)=\int_{\mathbb{R}^2}S(\mathbf{s})\lvert E_{\mathbf{s}}(\mathbf{r};m)\rvert^2\,d\mathbf{s}. \tag*{(7)}

By summing the intensity contributions of individual illumination directions, the Abbe formulation directly represents partially coherent imaging in a computational form. The equivalent Hopkins formulation combines the illumination source and projection pupil in the transmission cross coefficient (TCC), which is widely used in practical lithography simulation [20, 34]. We use the Abbe form because access to individual source points is convenient for optical data generation and for the source-conditioned construction developed later. Let M\mathcal{M}, S\mathcal{S}, A\mathcal{A}, and Z\mathcal{Z} be the spaces of mask transmission functions, continuous source distributions, aerial images, and resist images, respectively. We use θ\theta generically for the trainable parameters of each surrogate. We seek a learned surrogate operator

H~θ:M×S→A,(8)\widetilde{\mathcal{H}}_{\theta}:\mathcal{M}\times\mathcal{S}\to\mathcal{A}, \tag*{(8)}

whose predicted aerial image, for an MTF m(r)m(\mathbf{r}) and continuous source distribution S(s)S(\mathbf{s}), satisfies

a~(r)=[H~θ(m,S)](r)≈[H(m,S)](r)=a(r;m,S).(9)\widetilde{a}(\mathbf{r})=[\widetilde{\mathcal{H}}_{\theta}(m,S)](\mathbf{r})\approx[\mathcal{H}(m,S)](\mathbf{r})=a(\mathbf{r};m,S). \tag*{(9)}

The source distribution is specified in normalized pupil coordinates and supplied separately as a conditioning input. It is neither a spatial field on Ω\Omega nor an additional field concatenated with the MTF.

Photoresist Process

The photoresist process in Figure 1(b) is described here as a mapping from the aerial image a(r)a(\mathbf{r}) to a continuous resist image z(r)z(\mathbf{r}). In a chemically amplified resist (CAR), light activates the photoacid generator. The resulting acid catalyzes deprotection reactions, altering the local dissolution rate. Acid diffuses during exposure and the subsequent PEB [32]. Development then selectively removes material according to its solubility. A detailed simulation can include coupled transport and reaction dynamics and variation through the resist thickness, but requires calibrated material and process parameters [34].

For a tractable approximation, we use a two-dimensional CAR compact model consisting of spatial filtering and nonlinear response functions [9, 3, 36, 14]. The lateral coordinate is r=(x,y)∈Ω⊂R2\mathbf{r}=(x,y)\in\Omega\subset\mathbb{R}^{2}. Instead of resolving the fully coupled resist dynamics, the model treats exposure, acid diffusion, chemical amplification, and development as separately modeled responses in a sequence. An aerial image satisfying a(r)≥0a(\mathbf{r})\ge0 is mapped to a continuous resist image z:Ω→[0,1]z:\Omega\to[0,1] by the following four stages:

Exposure response:H0(r)=1−exp⁡[−αexpD a(r)],Acid diffusion:Hdiff(r)=(κσ∗H0)(r),Chemical amplification:Hamp(r)=1−exp⁡[−kampHdiff(r)namp],Development response:z(r)=Θβ(Hamp(r)−ϑdev).(10)\begin{aligned} \text{Exposure response:}\quad&H_{0}(\mathbf{r})=1-\exp[-\alpha_{\mathrm{exp}}D\,a(\mathbf{r})], \\ \text{Acid diffusion:}\quad&H_{\mathrm{diff}}(\mathbf{r})=(\kappa_{\sigma}*H_{0})(\mathbf{r}), \\ \text{Chemical amplification:}\quad&H_{\mathrm{amp}}(\mathbf{r})=1-\exp[-k_{\mathrm{amp}}H_{\mathrm{diff}}(\mathbf{r})^{n_{\mathrm{amp}}}], \\ \text{Development response:}\quad&z(\mathbf{r})=\Theta_{\beta}(H_{\mathrm{amp}}(\mathbf{r})-\vartheta_{\mathrm{dev}}). \tag*{(10)} \end{aligned}

The intermediate fields H0H_{0}, HdiffH_{\mathrm{diff}}, and HampH_{\mathrm{amp}} are the exposure, diffused, and amplified responses, respectively. The normalized exposure dose DD scales the aerial image, and αexp\alpha_{\mathrm{exp}} sets the exposure sensitivity. Here ∗* denotes convolution. Convolution with κσ\kappa_{\sigma} models cumulative lateral acid diffusion over exposure and PEB, rather than resolving acid transport in time. A response at one location therefore depends on exposure in neighboring regions as well as the local aerial image intensity. The parameters kampk_{\mathrm{amp}} and nampn_{\mathrm{amp}} set the strength and shape of the amplification response; ϑdev\vartheta_{\mathrm{dev}} is the development threshold. Development uses the smooth threshold Θβ(u)=1/[1+exp⁡(−βu)]\Theta_{\beta}(u)=1/[1+\exp(-\beta u)], with β\beta controlling transition sharpness.

We model diffusion with an isotropic Gaussian kernel,

κσ(r)=12πσ2exp⁡(−∥r∥222σ2),(11)\kappa_{\sigma}(\mathbf{r})=\frac{1}{2\pi\sigma^{2}}\exp\left(-\frac{\lVert\mathbf{r}\rVert_{2}^{2}}{2\sigma^{2}}\right), \tag*{(11)}

where σ\sigma gives the effective diffusion length and ∥r∥2\lVert\mathbf{r}\rVert_{2} measures Euclidean distance from the kernel center. Dependence of κσ\kappa_{\sigma} only on ∥r∥2\lVert\mathbf{r}\rVert_{2} gives diffusion no preferred direction. Its decay with physical distance makes nearby aerial image values contribute more to HdiffH_{\mathrm{diff}} than distant values. The Fourier transform is also Gaussian, suppressing rapid spatial variations. A threshold of 0.5 on the resist image defines the printed pattern:

p(r)=1{z(r)≥1/2}.(12)p(\mathbf{r})=\mathbf{1}_{\{z(\mathbf{r})\ge1/2\}}. \tag*{(12)}

This compact description does not resolve a full three-dimensional resist simulation. It preserves the spatial coupling from acid diffusion and the local nonlinear responses for exposure, chemical amplification, and development. The diffusion kernel is isotropic, and identical local response functions are used at every position. In this field representation, m(r)m(\mathbf{r}), a(r)a(\mathbf{r}), and z(r)z(\mathbf{r}) follow a periodic boundary convention. The convention serves the numerical treatment of spatial operators; it does not assert physical periodicity of the lithography fields. Isotropic convolution and spatially uniform local responses preserve rotation equivariance. The periodic boundary convention preserves translation equivariance. These features motivate the equivariant architecture presented later.

Denote the CAR compact operator in § 2.2 by RCAR:A→Z\mathcal{R}_{\mathrm{CAR}}:\mathcal{A}\to\mathcal{Z}. We learn a surrogate R~θ:A→Z\widetilde{\mathcal{R}}_{\theta}:\mathcal{A}\to\mathcal{Z} whose prediction satisfies

z~(r)=[R~θ(a)](r)≈[RCAR(a)](r)=z(r).(13)\widetilde{z}(\mathbf{r})=[\widetilde{\mathcal{R}}_{\theta}(a)](\mathbf{r})\approx[\mathcal{R}_{\mathrm{CAR}}(a)](\mathbf{r})=z(\mathbf{r}). \tag*{(13)}

No explicit source distribution is needed for this mapping, since the aerial image already contains its influence.

Structural Requirements

The physical mapping has geometric, discretization, and interaction structure that a lithography surrogate should preserve. We consider four related properties: rotation equivariance, translation equivariance, spatial adaptivity, and decay behavior. Figure 2(a) depicts the basic rotation relation: rotating the input field should rotate the output in the same way. For the optical mapping, the illumination source rotates together with the mask. Planar rotations constitute the two-dimensional special orthogonal group

Figure 2. Illustration of the rotation and translation equivariances and spatial adaptivity targeted by the LithoSAGE architecture.

SO(2)={Rα=(cos⁡α−sin⁡αsin⁡αcos⁡α):α∈[0,2π)}.(14)SO(2) = \left\{ R_{\alpha} = \begin{pmatrix} \cos\alpha& -\sin\alpha\\ \sin\alpha& \cos\alpha\end{pmatrix} : \alpha\in[0,2\pi) \right\}. \tag*{(14)}

For a spatial field u(r)u(\mathbf{r}), the rotation acts as

(Rαu)(r)=u(Rα−1r).(15)(R_{\alpha}u)(\mathbf{r}) = u(R_{\alpha}^{-1}\mathbf{r}). \tag*{(15)}

For a continuous source distribution, the analogous action is

(RαS)(s)=S(Rα−1s).(16)(R_{\alpha}S)(\mathbf{s}) = S(R_{\alpha}^{-1}\mathbf{s}). \tag*{(16)}

This operation rotates the illumination’s angular distribution in normalized pupil coordinates. With an ideal projection system, the continuous Abbe operator obeys the joint equivariance relation

H(Rαm,RαS)=RαH(m,S).(17)\mathcal{H}(R_{\alpha}m, R_{\alpha}S) = R_{\alpha}\mathcal{H}(m,S). \tag*{(17)}

Rotation equivariance for mask-to-aerial-image prediction therefore involves both the mask and the illumination source. If an anisotropic dipole source is held fixed while only the mask rotates, Eq. (17) does not generally hold. The continuous optical operator is jointly SO(2)SO(2) equivariant. In aerial-image-to-resist-image prediction, isotropic diffusion and spatially uniform pointwise response functions have no preferred orientation. A rotation of the aerial image thus produces the same rotation of the resist image.

Figure 2(b) depicts the analogous translation requirement: shifting the input should shift the output by the same amount. For a displacement τ=(τx,τy)∈R2\boldsymbol{\tau} = (\tau_x,\tau_y) \in\mathbb{R}^2, the translation is

Tτ(r)=r+τ.(18)T_{\boldsymbol{\tau}}(\mathbf{r}) = \mathbf{r} + \boldsymbol{\tau}. \tag*{(18)}

Its action on a spatial field u(r)u(\mathbf{r}) is

(Tτu)(r)=u(r−τ).(19)(T_{\boldsymbol{\tau}}u)(\mathbf{r}) = u(\mathbf{r} - \boldsymbol{\tau}). \tag*{(19)}

The inverse argument in Eq. (19) corresponds to moving the spatial pattern by τ\boldsymbol{\tau}. In optical imaging, source coordinates specify illumination angles in the pupil plane, so they do not move with a spatial translation of the mask. A spatially homogeneous optical model consequently satisfies

H(Tτm,S)=TτH(m,S)(20)\mathcal{H}(T_{\boldsymbol{\tau}}m,S) = T_{\boldsymbol{\tau}}\mathcal{H}(m,S) \tag*{(20)}

provided that the boundary convention preserves translation symmetry. For the resist mapping, diffusion is a function of relative displacement, and the local responses are uniform over the domain. The mapping therefore has translation equivariance under the same boundary convention.

Spatial adaptivity in Figure 2(c) means using a single learned model on layout windows with different physical extents. Lithography simulation involves small windows around individual patterns as well as larger windows that include more surrounding features. The surrogate should return the output on each corresponding window without a separate model for every window size.

Decay behavior, the fourth property, involves attenuation in physical and Fourier spaces. Nonlocal influence should generally decrease with spatial separation. At sufficiently high spatial frequencies, the response should be attenuated and approach zero at the relevant cutoff. Optical imaging combines nonlocal diffraction with a finite passband. Resist diffusion instead combines localized spatial coupling with attenuation of high frequencies. The surrogate should represent these behaviors alongside nonlocal coupling.

Methodology

Fourier Neural Operator Framework

For optical prediction, the input and output are u(r)=m(r)u(\mathbf{r}) = m(\mathbf{r}) and y(r)=a~(r)y(\mathbf{r}) = \widetilde{a}(\mathbf{r}); the illumination source enters separately as a nonspatial conditioning input. For resist prediction, they are u(r)=a(r)u(\mathbf{r}) = a(\mathbf{r}) and y(r)=z~(r)y(\mathbf{r}) = \widetilde{z}(\mathbf{r}). A standard FNO [25] applies a pointwise lifting map, passes the resulting field through Fourier layers, and then applies a pointwise projection:

u(r)→Pv0(r)→L0⋯→LL−1vL(r)→Qy(r).(21)u(\mathbf{r}) \xrightarrow{P} v_0(\mathbf{r}) \xrightarrow{\mathcal{L}_0} \cdots\xrightarrow{\mathcal{L}_{L-1}} v_L(\mathbf{r}) \xrightarrow{Q} y(\mathbf{r}). \tag*{(21)}

The map PP lifts the scalar input into a multichannel latent field, and QQ projects the last latent field to a scalar output. The network contains LL Fourier layers: Lℓ\mathcal{L}_{\ell} is layer ℓ\ell, with input latent field vℓv_{\ell}. We use dd for the common latent channel width. A Fourier layer takes the form

vℓ+1(r)=σact(Wℓvℓ(r)+(Kℓvℓ)(r)),(22)v_{\ell+1}(\mathbf{r}) = \sigma_{\mathrm{act}}\left(W_{\ell}v_{\ell}(\mathbf{r}) + (\mathcal{K}_{\ell}v_{\ell})(\mathbf{r})\right), \tag*{(22)}

where WℓW_{\ell} mixes channels through a pointwise linear map, σact\sigma_{\mathrm{act}} is a pointwise activation, and Kℓ\mathcal{K}_{\ell} acts as the Fourier multiplier

(Kℓvℓ)(r)=F−1(Gℓ(k)⋅F(vℓ)(k))(r).(23)(\mathcal{K}_{\ell}v_{\ell})(\mathbf{r}) = \mathcal{F}^{-1}\left(G_{\ell}(\mathbf{k}) \cdot\mathcal{F}(v_{\ell})(\mathbf{k})\right)(\mathbf{r}). \tag*{(23)}

Here F\mathcal{F} and F−1\mathcal{F}^{-1} are the discrete Fourier transform and its inverse, respectively. The discrete frequency index is k=(kx,ky)\mathbf{k} = (k_x, k_y), and Gℓ(k)G_{\ell}(\mathbf{k}) is the spectral weight matrix for layer ℓ\ell.

Write the latent-field Fourier coefficient as v^ℓ(k)=F(vℓ)(k)\widehat{v}_{\ell}(\mathbf{k}) = \mathcal{F}(v_{\ell})(\mathbf{k}) at discrete index k=(kx,ky)\mathbf{k} = (k_x, k_y). The retained indices form a set Λ\Lambda. In layer ℓ\ell, let CinC_{\mathrm{in}} and CoutC_{\mathrm{out}} be the input and output channel counts, respectively. For every k∈Λ\mathbf{k} \in\Lambda, a standard FNO learns a spectral matrix Gℓ(k)∈CCout×CinG_{\ell}(\mathbf{k}) \in\mathbb{C}^{C_{\mathrm{out}} \times C_{\mathrm{in}}}. The output Fourier coefficient in channel oo is computed by

(Kℓvℓ^)o(k)=∑i=1CinGℓ,o,i(k)v^ℓ,i(k),k∈Λ.(24)(\widehat{\mathcal{K}_{\ell}v_{\ell}})_o(\mathbf{k}) = \sum_{i=1}^{C_{\mathrm{in}}} G_{\ell,o,i}(\mathbf{k})\widehat{v}_{\ell,i}(\mathbf{k}), \qquad\mathbf{k} \in\Lambda. \tag*{(24)}

The indices ii and oo refer to input and output channels. At frequency index kk, the entry Gℓ,o,i(k)G_{\ell,o,i}(k) transfers the Fourier coefficient from input channel ii to output channel oo. Output coefficients outside the retained set Λ\Lambda are zero.

Fourier multiplication is convolution in physical space, allowing each output location to couple with information throughout the spatial domain. For a rectangular window of side lengths LxL_x and LyL_y, the discrete Fourier mode index k=(kx,ky)∈Z2k=(k_x,k_y)\in\mathbb{Z}^2 corresponds to angular spatial frequency

(ξx,ξy)=(2πkxLx,2πkyLy).(25)(\xi_x,\xi_y)=\left(\frac{2\pi k_x}{L_x},\frac{2\pi k_y}{L_y}\right). \tag*{(25)}

Continuous Spectral Parameterization

The physical extent of a window determines which physical frequencies its Fourier grid samples. Standard FNO assigns independent spectral weights to a fixed collection of discrete modes. These weights do not enforce equal responses at frequencies related by rotation. If the window extent changes, retaining the same indices changes the physical frequency range of the layer. Keeping that range fixed would instead require a different number of modes, including indices for which no weights have been learned. The construction below uses continuous weights in physical frequency to accommodate different windows and radial sharing to enforce rotation equivariance.

Physical passband. Standard FNO fixes the number of retained discrete modes to choose its spectral range. In LithoSAGE, a physical-frequency cutoff ξc\xi_c is specified instead, and the retained indices for each window are

Λ(Lx,Ly)={(kx,ky)∈Z2:(2πkxLx)2+(2πkyLy)2≤ξc}.(26)\Lambda(L_x,L_y)=\left\{(k_x,k_y)\in\mathbb{Z}^2:\sqrt{\left(\frac{2\pi k_x}{L_x}\right)^2+\left(\frac{2\pi k_y}{L_y}\right)^2}\leq\xi_c\right\}. \tag*{(26)}

The cutoff ξc\xi_c thus defines a common physical passband, while the number of retained modes varies with LxL_x and LyL_y. A larger window samples physical frequency more finely and contains more discrete modes in that passband. Its retained mode set adapts to the window extent, with the cutoff and learned spectral parameters unchanged.

Rotation equivariance. For the basic Fourier layer, rotation equivariance constrains spectral weights to a radial form. We use angular spatial frequency ξ=(ξx,ξy)\boldsymbol{\xi}=(\xi_x,\xi_y) in this analysis; it is related to the optical spatial frequency ff by ξ=2πf\boldsymbol{\xi}=2\pi f. Consider a continuous Fourier layer from input u∈L2(R2;CCin)u\in L^2(\mathbb{R}^2;\mathbb{C}^{C_{\mathrm{in}}}) to output y∈L2(R2;CCout)y\in L^2(\mathbb{R}^2;\mathbb{C}^{C_{\mathrm{out}}}), with a bounded, continuous spectral weight matrix G:R2→CCout×CinG:\mathbb{R}^2\to\mathbb{C}^{C_{\mathrm{out}}\times C_{\mathrm{in}}}. Rotations are assumed to affect spatial coordinates only, leaving the channel components unchanged.

Theorem 1 (Rotation equivariance of a Fourier layer). Suppose that

y^(ξx,ξy)=G(ξx,ξy)u^(ξx,ξy).(27)\widehat{y}(\xi_x,\xi_y)=G(\xi_x,\xi_y)\widehat{u}(\xi_x,\xi_y). \tag*{(27)}

The layer is equivariant under all planar rotations if and only if the spectral weight G(ξx,ξy)G(\xi_x,\xi_y) depends only on the radial frequency ξx2+ξy2\sqrt{\xi_x^2+\xi_y^2}. Equivalently, the spectral weight is constant on every circle centered at the origin.

Theorem 1 characterizes SO(2)SO(2) equivariance of the continuous Fourier layer. It supplies the radial constraint in LithoSAGE: equal radial frequencies share a spectral weight. The result holds for real as well as complex weights. If the operator must map real-valued fields to real-valued fields, coefficients at opposite frequencies must also obey conjugate symmetry. Radiality assigns equal weights to these opposite frequencies, so satisfying that symmetry requires

real spectral weights. Appendix § 8 proves the theorem, and Appendix § 9 gives the conjugate symmetry conditions for the two mappings.

In the continuous construction, lifting, projection, pointwise channel mixing, and activation use identical maps at every spatial position, preserving rotation and translation equivariance. For the resist mapping, radial weights in each Fourier layer therefore give rotation equivariance of the full network. For the optical mapping, the radial response is measured relative to source coordinates, as defined below; the resulting relation is equivariance under joint rotation of the mask and source. No analogous constraint on spectral weights is needed for translation, because Fourier multipliers already commute with translations.

Gaussian spectral weights. Define the radial frequency as ρ=ξx2+ξy2\rho= \sqrt{\xi_x^2+\xi_y^2} and its normalized coordinate over the common physical passband as ν(ξx,ξy)=ρ/ξc\nu(\xi_x,\xi_y)=\rho/\xi_c. The spectral weight for layer ℓ\ell, output channel oo, and input channel ii is parameterized by

Gℓ,o,i(ξx,ξy)=∑b=1Nbγℓ,o,i,bexp⁡(−(ν(ξx,ξy)−μb)2δℓ,b2).(28)G_{\ell,o,i}(\xi_x,\xi_y)=\sum_{b=1}^{N_b}\gamma_{\ell,o,i,b}\exp\left(-\frac{\left(\nu(\xi_x,\xi_y)-\mu_b\right)^2}{\delta_{\ell,b}^2}\right). \tag*{(28)}

The expansion uses NbN_b Gaussian basis functions. Basis bb has center μb\mu_b and positive width δℓ,b>0\delta_{\ell,b}>0 in layer ℓ\ell. The coefficient γℓ,o,i,b\gamma_{\ell,o,i,b} weights this basis from input channel ii to output channel oo in layer ℓ\ell. Increasing NbN_b gives a more flexible representation of the radial spectral response. Centers μb\mu_b and widths δℓ,b\delta_{\ell,b} may be fixed or trained, whereas coefficients are learned for every layer and channel pair. The coordinate ν(ξx,ξy)\nu(\xi_x,\xi_y) depends on (ξx,ξy)(\xi_x,\xi_y) only through ρ(ξx,ξy)\rho(\xi_x,\xi_y). Hence Eq. (28) is radial and satisfies Theorem 1.

For the optical mapping from mask and illumination source to aerial image, we extend the radial construction using frequencies relative to individual source points. The source-conditioned form represents illumination by a weighted set SQ={(sq,wq)}q=1NsS_Q=\{(s_q,w_q)\}_{q=1}^{N_s}. Here NsN_s is the number of source points, sq=(sq,x,sq,y)s_q=(s_{q,x},s_{q,y}) gives the normalized pupil coordinate of point qq, and wqw_q is a nonnegative weight. The weights are normalized by ∑q=1Nswq=1\sum_{q=1}^{N_s}w_q=1. The normalized radial coordinate for source point qq is

νq(ξx,ξy)=(ξxξc−αssq,x)2+(ξyξc−αssq,y)2,(29)\nu_q(\xi_x,\xi_y)=\sqrt{\left(\frac{\xi_x}{\xi_c}-\alpha_s s_{q,x}\right)^2+\left(\frac{\xi_y}{\xi_c}-\alpha_s s_{q,y}\right)^2}, \tag*{(29)}

where the dimensionless factor αs\alpha_s maps normalized pupil coordinates to normalized angular spatial frequency coordinates.

Conditioning the spectral weight on SQS_Q gives

Gℓ,o,i(ξx,ξy;SQ)=∑q=1Nswq∑b=1Nbγℓ,o,i,bexp⁡(−(νq(ξx,ξy)−μb)2δℓ,b2).(30)G_{\ell,o,i}(\xi_x,\xi_y;S_Q)=\sum_{q=1}^{N_s}w_q\sum_{b=1}^{N_b}\gamma_{\ell,o,i,b}\exp\left(-\frac{\left(\nu_q(\xi_x,\xi_y)-\mu_b\right)^2}{\delta_{\ell,b}^2}\right). \tag*{(30)}

The indices ℓ\ell, oo, and ii and the parameters NbN_b, γℓ,o,i,b\gamma_{\ell,o,i,b}, μb\mu_b, and δℓ,b\delta_{\ell,b} retain their meanings from Eq. (28). A basis function is radial in the frequency displacement from one source point. Summing these functions with source weights can nevertheless produce an anisotropic spectral response determined by the illumination. Jointly rotating the mask and source coordinates leaves the relative frequency distances unchanged, so the Fourier layer is equivariant under joint rotation of the mask and source. For the aerial-image-to-resist-image mapping, no explicit source enters and Eq. (28) is used. With the window-dependent mode set Λ(Lx,Ly)\Lambda(L_x,L_y) in Eq. (26), either spectral form can be evaluated on the Fourier grids of square and rectangular windows with different physical extents using the same learned parameters. For the form without an explicit source, radiality together with conjugate symmetry requires real spectral weights.

A finite sum of Gaussian radial basis functions can approximate a continuous function on a compact interval arbitrarily well, provided that sufficiently many components and suitable centers and widths are available [35]. Accordingly, the parameterization in Eq. (28) can, in principle, approximate continuous radial spectral responses over the retained frequency interval as NbN_b increases and suitable values of μb\mu_b and δb\delta_b are provided. For the spectral matrices in LithoSAGE, the approximation applies entry by entry. Omitting the layer index for clarity, write the bb-th Gaussian basis as

ϕb(ν)=exp⁡(−(ν−μb)2δb2).(31)\phi_b(\nu) = \exp\left(-\frac{(\nu-\mu_b)^2}{\delta_b^2}\right). \tag*{(31)}

The bases are smooth and localized near μb\mu_b. Their learned weighted sum gives a smooth, continuous spectral response, as in Figure 3(a). Near the physical cutoff we apply a cosine taper. It starts at normalized radial frequency ν0\nu_0, corresponding to physical radial frequency ρ0=ν0ξc\rho_0 = \nu_0\xi_c, and falls smoothly to zero over ρ0<ρ<ξc\rho_0 < \rho< \xi_c; see Figure 3(b). Denote the associated radial spatial kernel by Ksp(rsep)K_{\mathrm{sp}}(r_{\mathrm{sep}}), with scalar separation rsepr_{\mathrm{sep}}. Abrupt truncation at ξc\xi_c introduces a spectral-edge discontinuity. The smooth taper suppresses it and reduces oscillatory sidelobes in Ksp(rsep)K_{\mathrm{sp}}(r_{\mathrm{sep}}), promoting more localized interactions [18], as sketched in Figure 3(c). These curves are schematic. The learned response need not be globally monotonic, and the parameterization imposes no particular spatial decay law.

Figure 3. Schematic illustration of the localized Gaussian basis, smooth spectral cutoff taper, and associated spatial kernel decay.

Figure 4 summarizes the basic LithoSAGE architecture and the operations in one Fourier layer. The lifting map PP converts the input field to a latent field, a stack of LL Fourier layers processes it, and QQ projects it to the output. The upper path shows how continuous radial spectral weights are represented by a sum of Gaussian functions. The lower path applies these weights to Fourier coefficients of vℓv_\ell. The Fourier and pointwise outputs are added, and σact\sigma_{\mathrm{act}} produces the next field vℓ+1v_{\ell+1}. For optical prediction, the illumination source additionally conditions the spectral weights, as in Eq. (30).

Figure 4. Overall architecture of LithoSAGE and the spectral parameterization and computation in one Fourier layer.

Numerical Results

We compare LithoSAGE against FNO [25], DOINN [41], and CFNO [42]. The comparisons cover reference-window prediction errors and parameter counts, geometric equivariance, and transfer across physical window extents and spatial resolutions. The comparisons follow the common data splits and training protocol in § 4.1. DOINN and CFNO need input dimensions divisible by their pooling or patch factors. Where necessary, we apply periodic padding on the evaluation grid and crop the output to the original extent. Inputs and targets are never resized.

Experimental Protocol

The two tasks in § 2 are mask-to-aerial-image (mask-to-AI) prediction and aerial-image-to-resist-image (AI-to-RI) prediction. We evaluate LithoSAGE on both. The first approximates the optical operator of § 2.1; the second approximates the CAR compact resist operator of § 2.2. The experiments examine the structural properties targeted by the architecture.

Data generation. We construct ViaSet and MetalSet from the via and metal layer subsets, respectively, of LithoBench [51]. Each dataset uses 1,100 binary mask layouts, divided into 800 training, 100 validation, and 200 test samples with a fixed split. An original binary layout is denoted by χ(r)∈{0,1}\chi(\mathbf{r}) \in\{0,1\} on the reference square window of side length LrefL_{\mathrm{ref}}. Before optical simulation, we low-pass filter χ(r)\chi(\mathbf{r}) by retaining frequencies with ∥f∥2≤fLP\lVert\mathbf{f}\rVert_2 \le f_{\mathrm{LP}}. This gives the continuous mask transmission field m(r)m(\mathbf{r}). Area averaging then resamples m(r)m(\mathbf{r}) onto the task grid; small overshoots beyond [0,1][0,1] may remain. We simulate the aerial-image target a(r)a(\mathbf{r}) directly on the mask-to-AI grid. The CAR model and thresholding subsequently give the resist image z(r)z(\mathbf{r}) and printed pattern p(r)p(\mathbf{r}). Appendix § 7.§ 2 lists LrefL_{\mathrm{ref}}, fLPf_{\mathrm{LP}}, the task grids, and the physical simulation parameters.

ViaSet uses layouts from the first via layers of two benchmark digital circuits. A horizontal or vertical dipole source is assigned to each mask and represented by the quadrature SQS_Q with NSN_S points. The two orientations occur equally often in every training, validation, and test split. The optical simulator in TorchResist [39] generates aerial images with the wavelength λ\lambda, numerical aperture NA, and pupil model in Appendix § 7.§ 2. Resist targets use fixed CAR material parameters and the normalized exposure dose DD specified there for ViaSet.

MetalSet uses synthesized metal layer layouts with the same split and spatial discretization as ViaSet. Its aerial images use the same source representation and optical parameters (λ,NA)(\lambda,\mathrm{NA}). With the optical settings held fixed, layout geometry is the main difference between the mask-to-AI datasets. ViaSet has sparse via patterns, while MetalSet has denser patterns with longer, more connected metal features. Resist generation uses the same CAR material parameters, but DD takes the MetalSet value in Appendix § 7.§ 2. The datasets thus describe the same resist material at different exposure conditions and define different AI-to-RI mappings.

Representative ViaSet and MetalSet samples appear in Figure 5. Mask Layout labels the original binary field χ(r)\chi(\mathbf{r}); Mask Transmission labels the continuous field m(r)m(\mathbf{r}) after low-pass filtering. The simulated fields reflect the different geometries. Aerial and resist responses are more localized in ViaSet and extend more broadly along connected features in MetalSet. The resist images additionally reflect the different exposure conditions.

Representative generated samples for ViaSet and MetalSet

Figure 5. Representative generated samples for ViaSet and MetalSet. For each dataset, the panels show the illumination source, mask layout, mask transmission, aerial image, resist image, and printed pattern.

Training protocol. Equivariance tests and architecture comparisons use models trained on the reference window with the common splits and rotation augmentation. Every model in the architecture comparison has the same training window and epoch budget. Checkpoints are chosen using only the validation split. The spatial adaptivity study uses separate models trained jointly on the reference window and a larger square window, as specified in § 4.5. Model architectures and training settings are listed in Appendices § 7.§ 3 and § 7.§ 4, respectively.

Metrics. For a reference field and its prediction, write y,y~∈RNy, \tilde{y} \in\mathbb{R}^{N}, where NN counts pixels. We measure continuous aerial and resist image accuracy with the root mean square error (RMSE) and relative L2L_2 error:

RMSE⁡(y~,y)=(1N∑n=1N∣y~n−yn∣2)1/2,Rel.⁡L2(y~,y)=∥y~−y∥2∥y∥2.(32)\operatorname{RMSE}(\tilde{y},y)=\left(\frac{1}{N}\sum_{n=1}^{N}\lvert\tilde{y}_n-y_n\rvert^2\right)^{1/2}, \qquad\operatorname{Rel.} L_2(\tilde{y},y)=\frac{\lVert\tilde{y}-y\rVert_2}{\lVert y\rVert_2}. \tag*{(32)}

The maximum absolute error, ∥y~−y∥∞=max⁡n∣y~n−yn∣\lVert\tilde{y}-y\rVert_\infty=\max_n\lvert\tilde{y}_n-y_n\rvert, measures the largest pointwise difference in an output field. For AI-to-RI prediction, both the reference and predicted resist images are thresholded at 0.5. We evaluate the printed patterns with intersection over union (IOU) and PA. Denoting the predicted and reference printed pixel sets by IpredI_{\mathrm{pred}} and IrefI_{\mathrm{ref}}, respectively, gives

IOU⁡=∣Ipred∩Iref∣∣Ipred∪Iref∣,PA⁡=∣Ipred∩Iref∣∣Iref∣.(33)\operatorname{IOU}=\frac{\lvert I_{\mathrm{pred}}\cap I_{\mathrm{ref}}\rvert}{\lvert I_{\mathrm{pred}}\cup I_{\mathrm{ref}}\rvert}, \qquad\operatorname{PA}=\frac{\lvert I_{\mathrm{pred}}\cap I_{\mathrm{ref}}\rvert}{\lvert I_{\mathrm{ref}}\rvert}. \tag*{(33)}

IOU accounts for extra printed regions as well as missing ones. PA instead measures what fraction of reference printed pixels the prediction recovers. Both metrics range over [0,1][0,1], with higher values indicating closer agreement.

For equivariance under a spatial transformation gg, we compare two outputs: the prediction from the transformed input, Fθ(gx)F_\theta(gx), and the transformed prediction from the original input, gFθ(x)gF_\theta(x). Here FθF_\theta is the trained model. We quantify the difference with RMSE, relative L2L_2 error, and maximum absolute error. For AI-to-RI prediction, we also threshold both resist images at 0.5 and compute the IOU of the resulting printed patterns.

Prediction Accuracy and Parameter Efficiency

Reference-window prediction errors and parameter counts are reported in Table 1. With 0.089 million parameters, LithoSAGE uses about 1.9% of FNO’s parameter count. Its relative L2L_{2} errors are 0.0338 and 0.0248 for mask-to-AI prediction on ViaSet and MetalSet, respectively, and 0.0131 and 0.0088 for AI-to-RI prediction. Printed-pattern IOU and PA both exceed 0.99 on the two datasets. These results demonstrate accurate aerial-image and resist-image prediction and high printed-pattern agreement with a compact parameterization.

TaskDatasetModelParam. (10610^{6})Output RMSE ↓\downarrowOutput Rel. L2↓L_{2} \downarrowIOU ↑\uparrowPA ↑\uparrow
Mask→\toAIViaSetFNO4.7457.569×10−47.569 \times10^{-4}0.0537––
Mask→\toAIViaSetDOINN0.3011.640×10−31.640 \times10^{-3}0.1163––
Mask→\toAIViaSetCFNO1.5771.445×10−31.445 \times10^{-3}0.1024––
Mask→\toAIViaSetLithoSAGE0.0894.774×10−44.774 \times10^{-4}0.0338––
Mask→\toAIMetalSetFNO4.7452.362×10−32.362 \times10^{-3}0.0293––
Mask→\toAIMetalSetDOINN0.3015.413×10−35.413 \times10^{-3}0.0671––
Mask→\toAIMetalSetCFNO1.5777.818×10−37.818 \times10^{-3}0.0970––
Mask→\toAIMetalSetLithoSAGE0.0891.998×10−31.998 \times10^{-3}0.0248––
AI→\toRIViaSetFNO4.7403.780×10−43.780 \times10^{-4}0.00650.99660.9984
AI→\toRIViaSetDOINN0.2911.431×10−31.431 \times10^{-3}0.02450.98840.9921
AI→\toRIViaSetCFNO1.5681.762×10−31.762 \times10^{-3}0.03010.98540.9910
AI→\toRIViaSetLithoSAGE0.0897.640×10−47.640 \times10^{-4}0.01310.99270.9949
AI→\toRIMetalSetFNO4.7409.060×10−49.060 \times10^{-4}0.00550.99780.9986
AI→\toRIMetalSetDOINN0.2914.139×10−34.139 \times10^{-3}0.02510.99170.9951
AI→\toRIMetalSetCFNO1.5684.826×10−34.826 \times10^{-3}0.02920.98660.9978
AI→\toRIMetalSetLithoSAGE0.0891.457×10−31.457 \times10^{-3}0.00880.99640.9980

Table 1. Prediction errors and parameter counts on the 2048 nm ×\times 2048 nm reference window.

Rotation and Translation Equivariance

We assess rotation and periodic translation equivariance of LithoSAGE on both tasks. Each test compares two outputs: the prediction from a transformed input and the transformed prediction from the original input. The same spatial transformation is used in both paths. Comparing these outputs measures equivariance.

Rotation equivariance. Optical tests rotate the mask together with the quadrature points of the illumination source. Resist tests rotate the input aerial image. We use 90∘90^\circ, 180∘180^\circ, and 270∘270^\circ rotations, which exactly permute the square grid and require no interpolation. For mask-to-AI prediction, mean equivariance RMSE over the 200 test samples on ViaSet is 3.333×10−93.333 \times10^{-9}, 3.475×10−93.475 \times10^{-9}, and 3.319×10−93.319 \times10^{-9} at 90∘90^\circ, 180∘180^\circ, and 270∘270^\circ, respectively. MetalSet gives 1.353×10−81.353 \times10^{-8}, 1.462×10−81.462 \times10^{-8}, and 1.343×10−81.343 \times10^{-8}. For AI-to-RI prediction, the respective values are 1.633×10−81.633 \times10^{-8}, 2.106×10−82.106 \times10^{-8}, and 1.641×10−81.641 \times10^{-8} on ViaSet, and 3.848×10−83.848 \times10^{-8}, 5.354×10−85.354 \times10^{-8}, and 4.040×10−84.040 \times10^{-8} on MetalSet. The largest absolute residual across the tested cases is 3.159×10−63.159 \times10^{-6}, and the two printed patterns have IOU 1.0000. These residuals verify rotation equivariance for both tasks at the tested angles, up to floating point error.

Figure 6 compares the output fields for a 90∘90^\circ rotation. “Predict Rotated” comes from predicting the rotated input. To obtain “Rotate Prediction”, the model predicts the original input and that output is then rotated by 90∘90^\circ. The two fields look indistinguishable in each row. Their small differences lie near feature boundaries, consistent with the quantitative residuals.

Rotation equivariance of LithoSAGE at 90 degrees for the two prediction tasks on MetalSet

Figure 6. Rotation equivariance of LithoSAGE at 90∘90^\circ for the two prediction tasks on MetalSet.

Translation equivariance. For mask-to-AI prediction, only the mask is translated; the illumination source stays fixed in pupil coordinates. For AI-to-RI prediction, we periodically translate the input aerial image. The tested shifts are (0.1,0.1)(0.1, 0.1), (0.2,0.2)(0.2, 0.2), and (0.5,0.5)(0.5, 0.5) pixel. They correspond to physical displacements τ=(1.6,1.6)\tau= (1.6, 1.6) nm, (3.2,3.2)(3.2, 3.2) nm, and (8.0,8.0)(8.0, 8.0) nm for mask-to-AI, and τ=(0.6006,0.6006)\tau= (0.6006, 0.6006) nm, (1.2012,1.2012)(1.2012, 1.2012) nm, and (3.0029,3.0029)(3.0029, 3.0029) nm for AI-to-RI. To limit nonlinear aliasing on the coarse task grids, we periodically interpolate the input onto a twofold internal grid, halve the runtime pixel spacing, and spectrally project the prediction onto the original grid. Mask-to-AI RMSE values are 9.094×10−99.094 \times10^{-9}, 1.306×10−81.306 \times10^{-8}, and 4.054×10−94.054 \times10^{-9} on ViaSet, and 3.434×10−63.434 \times10^{-6}, 5.554×10−65.554 \times10^{-6}, and 2.217×10−82.217 \times10^{-8} on MetalSet. AI-to-RI values are 2.542×10−72.542 \times10^{-7}, 4.108×10−74.108 \times10^{-7}, and 1.520×10−81.520 \times10^{-8} on ViaSet, and 1.660×10−51.660 \times10^{-5}, 2.677×10−52.677 \times10^{-5}, and 4.251×10−84.251 \times10^{-8} on MetalSet. The first two shifts remain fractional on the internal grid. The final shift is integer there and serves as a control. LithoSAGE thus retains low residuals for subpixel translations, but its discrete implementation does not preserve fractional shifts on the grid to floating point precision.

The 0.1-pixel translation in Figure 7 illustrates the subpixel test. “Predict Shifted” is predicted from the shifted input. “Shift Prediction” is formed by predicting the original input and then shifting the output by 0.1 pixel in each coordinate direction. Differences occur mainly near feature boundaries. The close field agreement is consistent with the low residuals for subpixel periodic translation.

Periodic translation equivariance of LithoSAGE for a subpixel shift of 0.1 pixel on MetalSet

Figure 7. Periodic translation equivariance of LithoSAGE for a subpixel shift of 0.1 pixel on MetalSet.

Table 2 compares a 90° rotation and a subpixel periodic translation of 0.37 pixel. All four architectures use the same subpixel evaluation protocol. Rotation residuals for LithoSAGE are several orders of magnitude below those of the comparison models. Translation residuals are similar to FNO in most cases, while DOINN and CFNO give larger residuals. These observations agree with the construction: radial sharing imposes rotation equivariance, and the Fourier multiplier preserves translation equivariance under periodic boundaries.

TaskDatasetModelRot. Rel. L2L_2 ↓Rot. IOU ↑Shift Rel. L2L_2 ↓Shift IOU ↑
Mask→\toAIViaSetFNO3.064×10−23.064 \times10^{-2}–1.572×10−6\mathbf{1.572 \times10^{-6}}–
DOINN5.570×10−25.570 \times10^{-2}–4.666×10−24.666 \times10^{-2}–
CFNO6.448×10−26.448 \times10^{-2}–3.631×10−23.631 \times10^{-2}–
LithoSAGE2.353×10−7\mathbf{2.353 \times10^{-7}}–7.453×10−7\mathbf{7.453 \times10^{-7}}–
MetalSetFNO2.428×10−22.428 \times10^{-2}–6.431×10−5\mathbf{6.431 \times10^{-5}}–
DOINN5.678×10−25.678 \times10^{-2}–2.179×10−22.179 \times10^{-2}–
CFNO6.874×10−26.874 \times10^{-2}–2.247×10−22.247 \times10^{-2}–
LithoSAGE1.687×10−7\mathbf{1.687 \times10^{-7}}–5.299×10−5\mathbf{5.299 \times10^{-5}}–
AI→\toRIViaSetFNO3.588×10−33.588 \times10^{-3}0.99810.99816.268×10−6\mathbf{6.268 \times10^{-6}}1.0000\mathbf{1.0000}
DOINN2.171×10−22.171 \times10^{-2}0.98720.98721.001×10−21.001 \times10^{-2}0.99420.9942
CFNO2.729×10−22.729 \times10^{-2}0.98350.98357.597×10−27.597 \times10^{-2}0.67530.6753
LithoSAGE2.797×10−7\mathbf{2.797 \times10^{-7}}1.0000\mathbf{1.0000}5.396×10−6\mathbf{5.396 \times10^{-6}}1.0000\mathbf{1.0000}
MetalSetFNO3.906×10−33.906 \times10^{-3}0.99840.99841.945×10−5\mathbf{1.945 \times10^{-5}}1.0000\mathbf{1.0000}
DOINN2.173×10−22.173 \times10^{-2}0.99070.99075.655×10−35.655 \times10^{-3}0.99760.9976
CFNO2.194×10−22.194 \times10^{-2}0.99040.99045.161×10−35.161 \times10^{-3}0.99780.9978
LithoSAGE2.333×10−7\mathbf{2.333 \times10^{-7}}1.0000\mathbf{1.0000}1.244×10−41.244 \times10^{-4}1.0000\mathbf{1.0000}

Table 2. Relative equivariance residuals at a 90° rotation and a 0.37-pixel periodic translation.

Transfer from a Single Training Window

We evaluate direct transfer of the reference-window models under changes in physical window extent and spatial resolution. The reference field is 2048 nm ×\times 2048 nm, sampled at the pixel size for each task. Window transfer doubles both side lengths without changing pixel size. Resolution transfer halves pixel size on the same physical window. Joint transfer doubles the side lengths and halves pixel size at once. None of the settings involves retraining, and each target is simulated independently on its evaluation grid.

Table 3 reports transfer errors when window extent, resolution, or both change. LithoSAGE has the lowest errors in all four window-transfer cases and all four joint-transfer cases. In resolution transfer it gives the lowest errors for mask-to-AI on both datasets, whereas FNO gives the lowest errors for AI-to-RI. Within each task and dataset, its errors stay of the same order across the three settings. This indicates limited dependence on the training window or its discrete resolution. The behavior agrees with evaluating a continuous spectral function on each input’s physical frequency grid instead of using a fixed discrete grid. Alongside the prediction and equivariance results, the comparisons show that LithoSAGE combines compact parameterization, geometric equivariance, and stable transfer over the evaluated physical windows and resolutions.

TaskDatasetModelWindow ↓Resolution ↓Joint ↓
Mask→\toAIViaSetFNO0.31830.05610.3271
DOINN0.11472.43342.4453
CFNO0.10211.42971.4342
LithoSAGE0.03390.03570.0361
MetalSetFNO0.61180.03110.6139
DOINN0.06720.64970.6481
CFNO0.09730.62350.6224
LithoSAGE0.02500.02750.0276
AI→\toRIViaSetFNO0.37930.00650.3771
DOINN0.02490.16910.1691
CFNO0.03100.97290.9738
LithoSAGE0.01820.01310.0182
MetalSetFNO0.27010.00550.2698
DOINN0.02510.06220.0619
CFNO0.02930.10840.1063
LithoSAGE0.01490.00880.0149

Table 3. Relative L2L_2 errors under changes in physical window extent and spatial resolution.

Prediction on Multiple Windows and Local Error Analysis

We next examine spatial adaptivity using dedicated models trained jointly on 2048 nm × 2048 nm and 4096 nm × 4096 nm fields. Each window provides 800 training layouts and 100 validation layouts. Composites use only base layouts from the corresponding split. Within each epoch, batches from the two windows are randomly interleaved. We select the checkpoint with the lowest mean validation relative L2L_2 error across the two training windows. Evaluation covers both seen extents and the unseen 6144 nm × 6144 nm and 6144 nm × 4096 nm fields. For each task, the pixel size stays fixed across all windows. The three larger windows consist of 2 × 2, 3 × 3, and 3 × 2 arrangements of distinct binary layouts, respectively. We first assemble each complete binary field on the original grid, apply the same physical low-pass cutoff, and then resample it onto the task grid by area averaging. Aerial and resist targets are simulated over the complete composed field; they are not assembled from separately simulated subfields. Appendix § 7.§ 4 summarizes the losses and optimization settings for these dedicated models.

Mask-to-AI prediction. Figure 8 presents representative MetalSet predictions for the two seen and two unseen physical windows. At each window, the displayed layout has a maximum absolute error near the median, so these examples describe typical performance rather than the error tail. The predicted aerial images reproduce the overall optical response around the mask features at all four windows. Their maximum absolute errors are 0.0117, 0.0187, 0.0223, and 0.0219, respectively. Differences are largest near feature boundaries, where aerial intensity changes most rapidly. We examine the distribution of these largest local errors over the full test sets below.

Aerial image predictions for composed MetalSet layouts with different physical window extents

Figure 8. Aerial image predictions for composed MetalSet layouts with different physical window extents.

We then test all 200 layouts from each dataset at every physical window to assess whether the representative behavior holds more broadly. Table 4 lists aerial-image RMSE and relative L2L_2 error. Across the four windows, RMSE lies between 1.836×10−41.836 \times10^{-4} and 1.884×10−41.884 \times10^{-4} on ViaSet, and between 1.086×10−31.086 \times10^{-3} and 1.142×10−31.142 \times10^{-3} on MetalSet. Relative L2L_2 errors stay within 0.0131–0.0135 and 0.0136–0.0140, respectively. Neither measure increases systematically with physical window area. Thus, the same model retains nearly constant field averaged aerial-image accuracy on the larger windows, including both unseen extents.

DatasetPhysical windowOutput RMSE ↓\downarrowOutput Rel. L2L_2 ↓\downarrow
ViaSet2048 nm ×\times 2048 nm1.853×10−41.853 \times10^{-4}0.0131
ViaSet4096 nm ×\times 4096 nm1.836×10−41.836 \times10^{-4}0.0132
ViaSet6144 nm ×\times 6144 nm1.884×10−41.884 \times10^{-4}0.0135
ViaSet6144 nm ×\times 4096 nm1.863×10−41.863 \times10^{-4}0.0132
MetalSet2048 nm ×\times 2048 nm1.097×10−31.097 \times10^{-3}0.0136
MetalSet4096 nm ×\times 4096 nm1.086×10−31.086 \times10^{-3}0.0136
MetalSet6144 nm ×\times 6144 nm1.120×10−31.120 \times10^{-3}0.0138
MetalSet6144 nm ×\times 4096 nm1.142×10−31.142 \times10^{-3}0.0140

Table 4. Mask-to-AI prediction performance across physical window extents.

AI-to-RI prediction. The corresponding MetalSet AI-to-RI predictions appear in Figure 9. The four displayed windows have maximum absolute errors of 0.0210, 0.0282, 0.0350, and 0.0321, respectively. Differences occur mainly within narrow bands around resist boundaries. Although locally noticeable, these differences have little effect after thresholding. The predicted printed patterns consequently remain visually consistent with the simulated patterns at all four physical windows.

Resist image predictions for composed MetalSet layouts with different physical window extents

Figure 9. Resist image predictions for composed MetalSet layouts with different physical window extents.

Table 5 reports the AI-to-RI results for all 200 test layouts at each window. On ViaSet, RMSE rises from 4.780×10−44.780 \times10^{-4} at the reference window to 5.740×10−45.740 \times10^{-4}–5.926×10−45.926 \times10^{-4} at the three larger windows. Relative L2L_2 error similarly rises from 0.0082 to 0.0099–0.0102, with comparable errors across the larger windows. The changes on MetalSet are more gradual: RMSE increases

DatasetPhysical windowOutput RMSE ↓\downarrowOutput Rel. L2L_2 ↓\downarrowIOU ↑\uparrowPA ↑\uparrow
ViaSet2048 nm ×\times 2048 nm4.780×10−44.780 \times10^{-4}0.00820.99540.9969
ViaSet4096 nm ×\times 4096 nm5.926×10−45.926 \times10^{-4}0.01020.99410.9969
ViaSet6144 nm ×\times 6144 nm5.740×10−45.740 \times10^{-4}0.00990.99430.9970
ViaSet6144 nm ×\times 4096 nm5.874×10−45.874 \times10^{-4}0.01010.99410.9969
MetalSet2048 nm ×\times 2048 nm6.701×10−46.701 \times10^{-4}0.00410.99820.9984
MetalSet4096 nm ×\times 4096 nm7.185×10−47.185 \times10^{-4}0.00440.99800.9984
MetalSet6144 nm ×\times 6144 nm7.406×10−47.406 \times10^{-4}0.00450.99800.9985
MetalSet6144 nm ×\times 4096 nm7.539×10−47.539 \times10^{-4}0.00450.99790.9984

Table 5. AI-to-RI prediction performance across physical window extents.

from 6.701×10−46.701 \times10^{-4} to 7.539×10−47.539 \times10^{-4}, and relative L2L_2 error changes from 0.0041 to 0.0045. Even with these changes in the continuous resist images, the reported IOU values are at least 0.9940 on ViaSet and 0.9979 on MetalSet, while PA is at least 0.9968 and 0.9984. Printed patterns therefore remain stable at both seen and unseen extents. The moderate growth in continuous field error is not accompanied by a comparable loss of agreement in the printed patterns.

Distribution of localized errors. RMSE and relative L2L_2 error measure discrepancies averaged over the whole field. By contrast, the maximum absolute error of each layout captures isolated local differences. For every task and dataset, we set a reference error level on the 2048 nm×2048 nm2048\ \mathrm{nm} \times2048\ \mathrm{nm} window such that 98.0% of its 200 test layouts, or 196 layouts, fall at or below that level. We then use this fixed level for the remaining windows. For mask-to-AI prediction, the levels are 0.009 on ViaSet and 0.031 on MetalSet; for AI-to-RI prediction, they are 0.057 and 0.043, respectively. Coverage is the fraction of layouts whose maximum error falls at or below the corresponding fixed level. The reference-window value of 98.0% is therefore a calibration baseline; the comparison concerns how coverage changes across physical windows. We calibrate each task and dataset separately because their error distributions differ. These levels serve as references for window transfer, rather than common manufacturing acceptance limits.

Figure 10 reports the mask-to-AI distributions. Starting from 98.0%, ViaSet coverage falls to 94.5%, 81.0%, and 89.0% on the 4096 nm×4096 nm4096\ \mathrm{nm} \times4096\ \mathrm{nm}, 6144 nm×6144 nm6144\ \mathrm{nm} \times6144\ \mathrm{nm}, and 6144 nm×4096 nm6144\ \mathrm{nm} \times4096\ \mathrm{nm} windows, respectively. MetalSet coverage across the four windows is 98.0%, 91.0%, 83.0%, and 86.5%. In both datasets, coverage is lowest at the largest 6144 nm×6144 nm6144\ \mathrm{nm} \times6144\ \mathrm{nm} window and recovers partly at the smaller 6144 nm×4096 nm6144\ \mathrm{nm} \times4096\ \mathrm{nm} window. With a fixed pixel size, these windows contain approximately 1, 4, 9, and 6 times as many sampled locations. A maximum taken over a larger field thus has more opportunities to encounter an isolated large error. This also accounts for the lower coverage at the seen 4096 nm×4096 nm4096\ \mathrm{nm} \times4096\ \mathrm{nm} window than at the reference window: coverage describes the tail of localized errors, not simply whether an extent was seen during training. Meanwhile, Table 4 shows almost unchanged RMSE and relative L2L_2 errors. Together, these observations indicate broader localized error tails rather than a general loss of aerial-image accuracy.

Figure 10. Per-layout maximum absolute errors for mask-to-AI prediction across physical window extents. The red lines denote the fixed reference error levels defined in the text.

The AI-to-RI distributions are shown in Figure 11. Coverage on ViaSet is 98.0%, 81.5%, 77.0%, and 82.0% across the four windows; on MetalSet, it is 98.0%, 95.5%, 82.5%, and 87.0%. Both datasets again have their lowest coverage at 6144 nm × 6144 nm. Reducing the area to 6144 nm × 4096 nm raises coverage by 5.0 percentage points on ViaSet and 4.5 on MetalSet. The ViaSet values of 81.5% and 82.0% at 4096 nm × 4096 nm and 6144 nm × 4096 nm differ by just one of the 200 test layouts. This small difference does not establish a systematic reversal of the area trend. In resist prediction, a slight displacement of a steep transition can cause a large pointwise difference within a narrow band. The maximum error can therefore cross the reference level even when the resist image is accurate over most of the field. This agrees with Table 5: field averaged errors change moderately, while IOU and PA remain close to one at all four windows.

Figure 11. Per-layout maximum absolute errors for AI-to-RI prediction across physical window extents. The red lines denote the fixed reference error levels defined in the text.

Discussion and Conclusions

We have presented LithoSAGE, a spatially adaptive and geometrically equivariant neural operator for lithography simulation. Its basic spectral parameterization represents Fourier weights as continuous functions of normalized radial frequency through a learnable sum of Gaussian functions. Radial sharing enforces rotation equivariance in the continuous construction, while Fourier multipliers preserve translation equivariance under periodic boundary conditions. Evaluating the continuous spectral response on the physical frequency grids of different layout windows allows the learned parameters to be applied across windows of different physical extents. The localized Gaussian basis and smooth cutoff taper regularize the spectral response and promote spatial decay of the induced nonlocal kernels.

The main experiments demonstrate geometric equivariance and spatial adaptivity in both prediction tasks. Rotation residuals at 90∘90^\circ, 180∘180^\circ, and 270∘270^\circ remain near floating point precision, with the mask and illumination source rotated jointly in the optical task. Subpixel periodic translations also yield low residuals and closely aligned output fields. Models trained jointly on 2048 nm × 2048 nm and 4096 nm × 4096 nm fields apply directly to unseen window extents and shapes, without retraining or resizing inputs to the training window. Across the evaluated windows, errors in aerial image prediction remain almost unchanged. errors in resist image prediction increase moderately before stabilizing at the larger windows, while printed patterns maintain high IOU and PA. The distributions of the maximum error for individual layouts develop broader upper tails as the evaluated area grows, and the largest square window has the lowest reference coverage. Field averaged metrics remain much more stable. These results demonstrate accurate field predictions and high agreement between the predicted and reference printed patterns across the evaluated physical windows.

Comparisons with FNO, DOINN, and CFNO further assess predictive accuracy and parameter efficiency alongside these structural properties. Rotation equivariance residuals for LithoSAGE are substantially lower than those of the comparison models, demonstrating stronger consistency under rotation. For periodic translation, its residuals are comparable to the lowest values in most cases, while the predicted printed patterns maintain nearly perfect overlap with the translated reference patterns on both datasets. Models trained on the reference window also maintain low prediction errors when physical window extent and spatial resolution change, achieving the lowest errors among the compared models in the window transfer and joint transfer tests. On the reference window, LithoSAGE achieves competitive predictive accuracy with substantially fewer parameters. These results demonstrate that LithoSAGE combines accurate prediction, rotation and translation equivariance, and spatial adaptivity in a compact lithography surrogate. Future work will improve localized pointwise accuracy, explore more flexible equivariant spectral representations, and extend evaluation to a wider range of optical and resist process conditions.

Acknowledgments

This work is financially supported by National Key R&D Program of China (grant No.2024YFA1012403) and the National Natural Science Foundation of China (grant Nos.12325113 and 12426304). The authors thank Dr. Yihao Liang for his helpful suggestions to this work. The authors also acknowledge support from the SJTU Kunpeng & Ascend Center of Excellence.

Configuration and Notation

This appendix lists the numerical parameters and implementation settings for the experiments. The main text defines the symbols needed to follow the physical models, data pipeline, and network construction. The following tables give their values and distinguish related notation that might otherwise cause confusion.

Notation and Parameter Conventions

Table 6: Key notation and parameter conventions used across the physical model, network, and experiments.

SymbolMeaningConvention or distinction
χ\chi, mm, aa, zz, ppLayout and lithography fieldsBinary layout, mask transmission, aerial image, resist image, and printed pattern, respectively.
S(s)S(s); SQS_QSource representationsSS is continuous; SQ={(sq,wq)}q=1NsS_Q = \{(s_q, w_q)\}_{q=1}^{N_s} is the quadrature representation used in computation.
r=(x,y)r = (x, y)Lateral spatial coordinateMeasured in nm; rsepr_{\mathrm{sep}} denotes scalar spatial separation.
ffSpatial frequencyCycles per unit length; used in the optical model and mask preprocessing.
ξ=(ξx,ξy)\xi= (\xi_x, \xi_y)Angular spatial frequencyξ=2πf\xi= 2\pi f; used in the spectral parameterization of LithoSAGE.
fcf_cCoherent optical cutoffOptical pupil cutoff, fc=NA/λf_c = \mathrm{NA}/\lambda.
fLPf_{\mathrm{LP}}Mask preprocessing cutoffApplied before optical simulation; distinct from the network cutoff ξc\xi_c.
ξc\xi_cLithoSAGE spectral cutoffAngular frequency cutoff that defines the retained mode set.
LrefL_{\mathrm{ref}}Reference side lengthSide length of the square reference window.
LLNumber of Fourier layersNetwork depth; distinct from LxL_x, LyL_y, and LrefL_{\mathrm{ref}}.
ddLatent channel widthUpright dd is reserved for integration differentials.
NN, NsN_s, NbN_bPixel, source point, and basis countsThe subscripts distinguish the three quantities.

Table 6.

Physical Simulation and Data Generation Parameters

Table 7: Spatial discretization and optical data generation parameters.

ParameterValueRole
Reference side length LrefL_{\mathrm{ref}}2048 nmReference physical window.
Grid of the original binary mask2048 × 20481 nm sampling before filtering and resampling.
Mask low-pass cutoff fLPf_{\mathrm{LP}}0.0127 nm−1^{-1}Approximate transmitted frequency support over all source points.
Mask-to-AI grid128 × 128Pixel size 16 nm.
AI-to-RI grid341 × 341Pixel size 6.0059 nm.
Wavelength λ\lambda193 nmOptical wavelength.
Numerical aperture NA1.35Projection numerical aperture.
Coherent cutoff fcf_c0.0070 nm−1^{-1}fc=NA/λf_c = \mathrm{NA}/\lambda.
Projection pupilIdeal circular pupilNo aberration or defocus.
Source distribution SSHorizontal/vertical dipoleEqual representation of both orientations in each split.
Source quadrature size NsN_s32Quadrature points per source.

Table 7.

ParameterValueMeaning
aexpa_{\mathrm{exp}}2.5Exposure sensitivity.
DD0.9 (ViaSet); 0.5 (MetalSet)Normalized exposure dose.
σ\sigma16 nmLateral diffusion length.
kampk_{\mathrm{amp}}3Amplification strength.
nampn_{\mathrm{amp}}1Amplification exponent.
ϑdev\vartheta_{\mathrm{dev}}0.5Development threshold.
β\beta40Smooth threshold sharpness.
Printed pattern threshold0.5Threshold for the continuous resist image.

Table 8. CAR compact model parameters used to generate the AI-to-RI datasets.

The two datasets share all CAR material parameters but use different normalized exposure doses DD. At the AI-to-RI pixel spacing, σ=16\sigma= 16 nm corresponds to 2.6641 pixels on the 341×341341 \times341 grid. For each dataset, we choose DD from a fixed candidate sweep using the first 100 training layouts only. Selection maximizes aggregate IOU between simulated printed patterns and the original binary layouts. This dose is then held fixed throughout the training, validation, and test sets.

LithoSAGE Architecture Parameters

ParameterMask-to-AIAI-to-RIRole
Fourier layers LL44Spectral layer count.
Latent width dd3232Latent channel count.
Reference side length LrefL_{\mathrm{ref}}2048 nm2048 nmReference length for the cutoff.
Spectral cutoff ξc\xi_c0.0706 rad nm−1^{-1}0.0706 rad nm−1^{-1}Fixed cutoff; 24 modes on the reference window, with indices recomputed for each window.
Gaussian bases NbN_b1616Radial basis count.
Gaussian centers μb\mu_b(b−1/2)/Nb\sqrt{(b-1/2)/N_b}Linearly spaced on [0,1][0,1]Centers in normalized radial frequency.
Gaussian widths δℓ,b\delta_{\ell,b}Fixed from adjacent center spacingLearned independently by layerBasis widths.
Source scale αs\alpha_s0.6228–Scale from source coordinates to normalized angular frequency.

Table 9. Architecture parameters of LithoSAGE for the two prediction tasks.

For mask-to-AI prediction, source conditioning is implemented on a centered full spectrum so that the mask and source can be rotated jointly, with αs=2πfc/ξc\alpha_s = 2\pi f_c/\xi_c. The spectral coefficients use an initialization gain of 0.5. The final weight matrix in the output head uses a gain of 0.1. Its output bias is initialized from four times the mean target intensity in the training split. For AI-to-RI prediction, we use a real radial spectral multiplier, in accordance with the real-field symmetry described in Appendix § 9. The spectral response is multiplied by the cosine taper

t(ν)={1,0≤ν≤0.9,12[1+cos⁡(πν−0.90.1)],0.9<ν<1,0,ν≥1,(34)t(\nu) = \begin{cases} 1, & 0 \le\nu\le0.9, \\ \frac{1}{2}\left[1+\cos\left(\pi\frac{\nu-0.9}{0.1}\right)\right], & 0.9 < \nu< 1, \\ 0, & \nu\ge1, \end{cases} \tag*{(34)}

in which ν=ξx2+ξy2/ξc\nu= \sqrt{\xi_x^2+\xi_y^2}/\xi_c.

Training and Evaluation Parameters

SettingReference windowMultiple windows
Training windows2048 nm ×\times 2048 nm2048 nm ×\times 2048 nm and 4096 nm ×\times 4096 nm
Batch size22 for each window loader
Random seed00
OptimizerAdam, (β1,β2)=(0.9,0.999)(\beta_1, \beta_2) = (0.9, 0.999); no weight decaySame
Rotation augmentation0∘0^\circ, 90∘90^\circ, 180∘180^\circ, 270∘270^\circ sampled uniformlySame
Maximum epochs2020
Mask-to-AI lossPixelwise MSEPixelwise MSE plus 0.2 times the MSE of the largest 1% absolute residuals
AI-to-RI lossPixelwise MSEPixelwise MSE
Checkpoint criterionLowest validation relative L2L_2 errorLowest mean validation relative L2L_2 error over both windows

Table 10. Training settings for LithoSAGE in the reference window and multiple window experiments.

For LithoSAGE, mask-to-AI training uses a learning rate of 2×10−32 \times10^{-3} in epochs 1–10 and 2×10−42 \times10^{-4} in epochs 11–20. AI-to-RI training uses 10−310^{-3} in epochs 1–5 and 10−410^{-4} in epochs 6–20. Original aerial images, mask-to-AI targets, and AI-to-RI inputs are scaled to [0,2][0, 2]; continuous RI targets and AI-to-RI outputs are in [0,1][0, 1]. The optical output is twice a sigmoid output, whereas the RI output uses a sigmoid directly. Neither training nor checkpoint selection uses the test split.

The experiment subsections give the equivariance settings and localized-error evaluation parameters, since these specify the reported tests directly. In particular, § 4.3 defines the subpixel translations, and § 4.5 defines the reference levels for the localized maximum-error analysis.

Baseline Configurations

Although the three comparison architectures have different internal representations, none natively accepts an unordered set of source quadrature points. We therefore supply the illumination condition to FNO, DOINN, and CFNO through a common source descriptor for mask-to-AI prediction. For a function ψ\psi of source coordinates,

Ew[ψ(s)]=∑q=1Nswqψ(sq),(35)\mathbb{E}_w[\psi(\mathbf{s})] = \sum_{q=1}^{N_s} w_q \psi(\mathbf{s}_q), \tag*{(35)}

with ∑qwq=1\sum_q w_q = 1. We use the following nine moments in the descriptor:

(Ew[sx],Ew[sy],Ew[sx2],Ew[sy2],Ew[sxsy],Ew[sx2+sy2],Ew[sx4],Ew[sy4],Ew[sx2sy2]),(36)\left(\mathbb{E}_w[s_x], \mathbb{E}_w[s_y], \mathbb{E}_w[s_x^2], \mathbb{E}_w[s_y^2], \mathbb{E}_w[s_xs_y], \mathbb{E}_w[s_x^2+s_y^2], \mathbb{E}_w[s_x^4], \mathbb{E}_w[s_y^4], \mathbb{E}_w[s_x^2s_y^2]\right), \tag*{(36)}

A 9→32→169 \to32 \to16 multilayer perceptron maps these moments to a conditioning vector. The moments distinguish the two fixed orthogonal dipoles used here without ambiguity. This encoding gives the baselines a compatible source-conditioning interface. By comparison, LithoSAGE incorporates the quadrature set SQS_Q directly into its spectral layer.

FNO. The FNO baseline uses the standard spectral architecture described in § 3.1. After lifting, a stack of Fourier layers processes the latent field using independent complex weights on the retained modes. For comparison, we match its layer count and latent width to LithoSAGE. Its spectral weights are still attached to discrete Fourier modes, rather than continuous radial functions. In mask-to-AI prediction, the source descriptor conditions each spectral block.

DOINN. DOINN joins a global RFNO branch with a local convolutional path. Pooling supplies the RFNO input, while a local encoder retains higher-frequency spatial information at several channel scales. In mask-to-AI prediction, the source descriptor conditions the RFNO feature and the features at every encoder scale before the two branches are combined.

CFNO. CFNO extracts spectral features at multiple patch scales and combines them with a convolutional encoder and decoder. Its three patch branches represent different spatial scales, while the convolutional path gathers local features. For mask-to-AI prediction, source conditioning is applied to the spectral and convolutional feature groups before they are combined. The numerical architecture settings for these implementations are listed in Table 11.

ModelSpectral or multiscale settingsLocal or channel settings
FNO4 Fourier layers; 24 retained modesLatent width 32
DOINN8×88 \times8 average pooling; RFNO with 24 retained modesRFNO output 96; encoder widths (24, 48, 96)
CFNOPatch sizes (16, 32, 64); feature dimensions (16, 32, 64)Encoder (32, 64, 128); decoder (128, 64, 32)

Table 11. Core numerical architecture settings of the comparison models.

Table 12 lists each model’s learning rate schedule. The remaining shared training settings follow § 4.1 and Appendix § 7.§ 4.

ModelMask-to-AIAI-to-RI
FNO2×10−32 \times10^{-3} (1–3); 2×10−42 \times10^{-4} (4–10); 10−410^{-4} (11–15); 5×10−55 \times10^{-5} (16–20)5×10−45 \times10^{-4} (1–5); 5×10−55 \times10^{-5} (6–10); 2.5×10−52.5 \times10^{-5} (11–20)
DOINN5×10−45 \times10^{-4} (1–5); 5×10−55 \times10^{-5} (6–20)5×10−45 \times10^{-4} (1–5); 5×10−55 \times10^{-5} (6–10); 2.5×10−52.5 \times10^{-5} (11–20)
CFNO5×10−45 \times10^{-4} (1–5); 5×10−55 \times10^{-5} (6–10); 2.5×10−52.5 \times10^{-5} (11–20)3×10−43 \times10^{-4} (1–3); 3×10−53 \times10^{-5} (4–10); 2.5×10−52.5 \times10^{-5} (11–20)

Table 12. Learning rate schedules for the baseline models trained on the reference window.

Proof of the Radial Spectral Weight Characterization

Proof of Theorem 1. Write LG\mathcal{L}_{G} for the Fourier layer in Eq. (27). A rotation through α∈[0,2π)\alpha\in[0, 2\pi) acts on a field as

(Rαu)(x)=u(Rα−1x).(37)(R_{\alpha}u)(x) = u(R_{\alpha}^{-1}x). \tag*{(37)}

For multiple scalar channels, the rotation acts on each channel separately without mixing channel indices. Changing variables yields

Rαu^(ξ)=u^(Rα−1ξ),(38)\widehat{R_{\alpha}u}(\xi) = \hat{u}(R_{\alpha}^{-1}\xi), \tag*{(38)}

with ξ=(ξx,ξy)\xi= (\xi_x,\xi_y). If we rotate the input before applying the Fourier layer, we obtain

LGRαu^(ξ)=G(ξ)u^(Rα−1ξ).(39)\widehat{\mathcal{L}_{G}R_{\alpha}u}(\xi) = G(\xi)\hat{u}(R_{\alpha}^{-1}\xi). \tag*{(39)}

If we apply the layer before rotating the output, we obtain

RαLGu^(ξ)=G(Rα−1ξ)u^(Rα−1ξ).(40)\widehat{R_{\alpha}\mathcal{L}_{G}u}(\xi) = G(R_{\alpha}^{-1}\xi)\hat{u}(R_{\alpha}^{-1}\xi). \tag*{(40)}

The layer is therefore rotation equivariant provided that

G(ξ)=G(Rα−1ξ)(41)G(\xi) = G(R_{\alpha}^{-1}\xi) \tag*{(41)}

at every ξ\boldsymbol{\xi} and for every α\alpha. Direct substitution establishes sufficiency.

For necessity, assume that the layer is rotation equivariant, yet the matrices in Eq. (B.5) differ at a frequency ξ0\boldsymbol{\xi}_0. By continuity of their difference, there exist a channel vector c\boldsymbol{c} and a neighborhood UU of ξ0\boldsymbol{\xi}_0 such that

[G(ξ)−G(Rα−1ξ)]c≠0.(42)\left[G(\boldsymbol{\xi})-G(R_{\alpha}^{-1}\boldsymbol{\xi})\right]\boldsymbol{c}\ne0. \tag*{(42)}

Now choose Fourier data supported in Rα−1UR_{\alpha}^{-1}U and aligned with c\boldsymbol{c}. The outputs in Eqs. (B.3) and (B.4) then differ on UU, contradicting rotation equivariance. Thus, Eq. (B.5) must hold at every frequency.

A rotation leaves the frequency radius unchanged:

∥Rα−1ξ∥2=∥ξ∥2.(43)\left\lVert R_{\alpha}^{-1}\boldsymbol{\xi}\right\rVert_{2}=\left\lVert\boldsymbol{\xi}\right\rVert_{2}. \tag*{(43)}

When GG depends only on ∥ξ∥2\lVert\boldsymbol{\xi}\rVert_{2}, this identity ensures Eq. (B.5) and hence rotation equivariance. Conversely, Eq. (B.5) requires equal values of GG at frequencies connected by a rotation. Any two points on a circle centered at the origin can be related by a planar rotation. Therefore, GG is constant along each such circle and is a function only of ∥ξ∥2\lVert\boldsymbol{\xi}\rVert_{2}.

Real Spectral Weights for Real Fields

We use the angular spatial frequencies ξx\xi_x and ξy\xi_y defined in Eq. (25). Under this convention, the continuous Fourier transform takes the form

u^(ξx,ξy)=∫R2u(x,y)exp⁡[−i(ξxx+ξyy)] dx dy.(44)\widehat{u}(\xi_x,\xi_y)=\int_{\mathbb{R}^{2}}u(x,y)\exp[-\mathrm{i}(\xi_xx+\xi_yy)]\,\mathrm{d}x\,\mathrm{d}y. \tag*{(44)}

If uu is a real field, then

u^(−ξx,−ξy)=u^(ξx,ξy)‾.(45)\widehat{u}(-\xi_x,-\xi_y)=\overline{\widehat{u}(\xi_x,\xi_y)}. \tag*{(45)}

The output yy must obey the same relation to be real. Together with Eq. (27), this gives the necessary and sufficient condition

G(−ξx,−ξy)=G(ξx,ξy)‾.(46)G(-\xi_x,-\xi_y)=\overline{G(\xi_x,\xi_y)}. \tag*{(46)}

For a matrix-valued multiplier, this equality applies to each entry.

The AI-to-RI spectral weight is radial about the origin, which implies

G(−ξx,−ξy)=G(ξx,ξy).(47)G(-\xi_x,-\xi_y)=G(\xi_x,\xi_y). \tag*{(47)}

Combining Eqs. (C.3) and (C.4) yields

G(ξx,ξy)=G(ξx,ξy)‾.(48)G(\xi_x,\xi_y)=\overline{G(\xi_x,\xi_y)}. \tag*{(48)}

The radial multiplier must consequently be real. The Gaussian basis functions are real, so we enforce this requirement through

γℓ,o,i,b∈R.(49)\gamma_{\ell,o,i,b}\in\mathbb{R}. \tag*{(49)}

In mask-to-AI prediction, the Gaussian responses are centered relative to source points, so the multiplier is not radial about the origin. The dipole quadrature used here is, however, centrally symmetric. Each source point (sq,wq)(s_q,w_q) has a partner (sq∗,wq∗)(s_{q^*},w_{q^*}) for which

sq∗=−sq,wq∗=wq.(50)s_{q^*}=-s_q,\qquad w_{q^*}=w_q. \tag*{(50)}

Each such pair satisfies

∥ξξc−αssq∥2=∥ξξc−αssq∗∥2.(51)\left\lVert\frac{\boldsymbol{\xi}}{\xi_c}-\alpha_s s_q\right\rVert_2 = \left\lVert\frac{\boldsymbol{\xi}}{\xi_c}-\alpha_s s_{q^*}\right\rVert_2. \tag*{(51)}

The paired points have equal weights as well. Reindexing the source sum in Eq. (30) therefore gives

Gℓ,o,i(−ξ;SQ)=Gℓ,o,i(ξ;SQ).(52)G_{\ell,o,i}(-\xi; S_Q) = G_{\ell,o,i}(\xi; S_Q). \tag*{(52)}

The taper defined in Eq. (A.1) is a function only of ∥ξ∥2\lVert\xi\rVert_2, making it even. With real SOG coefficients, the full source-conditioned multiplier is both real and even, as required by Eq. (C.3).

The centered frequency representation in the mask-to-AI model retains both ξ\xi and −ξ-\xi. Applying this real, even multiplier therefore preserves the Hermitian symmetry of real inputs and yields real outputs.

References

  1. [1]Bahador Bahmani, Somdatta Goswami, et al. A resolution independent neural operator. Comput. Methods Appl. Mech. Engr., 444:118113, 2025.
  2. [2]Sumanth Kumar Boya and Deepak N. Subramani. PINTO: Physics-informed transformer neural operator for learning generalized solutions of partial differential equations for any initial and boundary condition. Comput. Phys. Commun., 315:109702, 2025.DOI
  3. [3]Jeffrey D. Byers, Mark D. Smith, et al. Lumped parameter model for chemically amplified resists. In Optical Microlithography XVII, 5377:1462–1474, 2004.DOI
  4. [4]Fukai Chen, Ziyang Liu, et al. NSNO: Neumann series neural operator for solving Helmholtz equations in inhomogeneous medium. J. Syst. Sci. Complex., 37(2):413–440, 2024.arxiv.org/abs/2401.13494
  5. [5]Guojin Chen, Wanli Chen, et al. DAMO: Deep agile mask optimization for full chip scale. In Proceedings of the 39th IEEE/ACM ICCAD, 1–9, 2020.DOI
  6. [6]Taco Cohen and Max Welling. Group equivariant convolutional networks. In Proceedings of the 33rd ICML, Proceedings of Machine Learning Research, 48:2990–2999, 2016.arxiv.org/abs/1602.07576
  7. [7]Frederick H. Dill, William P. Hornberger, et al. Characterization of positive photoresist. IEEE Trans. Electron Devices, 22(7):445–452, 1975.DOI
  8. [8]David Erzmann and Sören Dittmer. Equivariant neural operators for gradient-consistent topology optimization. J. Comput. Des. Eng., 11(3):91–100, 2024.DOI
  9. [9]David Fuard, Maxime Besacier, et al. Validity of the diffused aerial image model: An assessment based on multiple test cases. In Optical Microlithography XVI, 5040:1536–1543, 2003.DOI
  10. [10]Xuanzhao Gao, Shidong Jiang, et al. A fast spectral sum-of-Gaussians method for electrostatic summation in quasi-2D systems. Numer. Math., 158(2):533–585, 2026.arxiv.org/abs/2412.04595
  11. [11]Robin Ghyselinck, Valentin Delchevalerie, et al. On the effectiveness of rotation-equivariance in U-Net: A benchmark for image segmentation. Trans. Mach. Learn. Res., 2025.arxiv.org/abs/2412.09182
  12. [12]Joseph W. Goodman. Introduction to Fourier Optics. W. H. Freeman, 4th edition, 2017.
  13. [13]Yuri Granik. Transformational invariance in compact process modeling. Journal of Micro/Nanolithography, MEMS, and MOEMS, 19(1):013502, 2020.DOI
  14. [14]Yuri Granik, Dmitry Medvedev, et al. Toward standard process models for OPC. In Optical Microlithography XX, 6520:652043, 2007.DOI
  15. [15]Shaopeng Guo, Lei Cheng, et al. Symmetry-preserving modeling for lithographic imaging. Opt. Lett., 49(14):4038–4041, 2024.DOI
  16. [16]Gaurav Gupta, Xiongye Xiao, et al. Multiwavelet-based operator learning for differential equations. In NeurIPS, 34:24048–24062, 2021.arxiv.org/abs/2109.13459
  17. [17]Zhongkai Hao, Zhengyi Wang, et al. GNOT: A general neural operator transformer for operator learning. In Proceedings of the 40th ICML, Proceedings of Machine Learning Research, 202:12556–12569, 2023.arxiv.org/abs/2302.14376
  18. [18]Fredric J. Harris. On the use of windows for harmonic analysis with the discrete Fourier transform. Proceedings of the IEEE, 66(1):51–83, 1978.DOI
  19. [19]Jacob Helwig, Xuan Zhang, et al. Group equivariant Fourier neural operators for partial differential equations. In Proceedings of the 40th ICML, Proceedings of Machine Learning Research, 202:12907–12930, 2023.arxiv.org/abs/2306.05697
  20. [20]Harold H. Hopkins. On the diffraction theory of optical images. Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences, 217(1130):408–432, 1953.DOI
  21. [21]Qian Serena Hou and Zecheng Gan. LSR-Net: Long-short-range operator learning for pattern dynamics on manifolds. arXiv:2607.00750, 2026.arxiv.org/abs/2607.00750
  22. [22]Yajie Ji, Jiuyang Liang, et al. Machine-learning interatomic potentials for long-range systems. Phys. Rev. Lett., 135(17):178001, 2025.DOI
  23. [23]Nikola B. Kovachki, Samuel Lanthaler, et al. Operator learning: Algorithms and analysis. In Siddhartha Mishra and Alex Townsend, editors, Numerical Analysis Meets Machine Learning, Handbook of Numerical Analysis, 25:419–467. Elsevier, 2024.arxiv.org/abs/2402.15715
  24. [24]Zongyi Li, Nikola B. Kovachki, et al. Neural operator: Graph kernel network for partial differential equations. In ICLR 2020 Workshop: DeepDiffEq, 2020.arxiv.org/abs/2003.03485
  25. [25]Zongyi Li, Nikola B. Kovachki, et al. Fourier neural operator for parametric partial differential equations. In ICLR, 2021.
  26. [26]Zongyi Li, Hongkai Zheng, et al. Physics-informed neural operator for learning partial differential equations. ACM/IMS J. Data Sci., 1(3):1–27, 2024.arxiv.org/abs/2111.03794
  27. [27]Jiuyang Liang, Zixuan Gao, et al. A kernel-independent sum-of-Gaussians method by de la Vallée-Poussin sums. Adv. Appl. Math. Mech., 13(5):1126–1141, 2021.
  28. [28]Yibo Lin, Meng Li, et al. Data efficient lithography modeling with transfer learning and active data selection. IEEE Trans. Comput.-Aided Design Integr. Circuits Syst., 38(10):1900–1913, 2019.arxiv.org/abs/1807.03257
  29. [29]Siyu Liu, Yihui Tu, et al. Exponential-enhanced Fourier neural operator: A dual-channel framework for solving PDEs with nonlocal kernels. J. Comput. Appl. Math., 489:117870, 2027.DOI
  30. [30]Lu Lu, Pengzhan Jin, et al. Learning nonlinear operators via DeepONet based on the universal approximation theorem of operators. Nat. Mach. Intell., 3(3):218–229, 2021.
  31. [31]Chris A. Mack. PROLITH: A comprehensive optical lithography model. In Optical Microlithography IV, 538:207–220, 1985.DOI
  32. [32]Chris A. Mack. Lithographic effects of acid diffusion in chemically amplified resists. In Elsa Reichmanis, Christopher K. Ober, et al., editors, Microelectronics Technology: Polymers for Advanced Imaging and Packaging, ACS Symposium Series, 614:56–68. American Chemical Society, 1995.DOI
  33. [33]Chris A. Mack. Lithographic simulation: A review. In Lithographic and Micromachining Techniques for Optical Component Fabrication, 4440:59–72, 2001.DOI
  34. [34]Chris A. Mack. Fundamental Principles of Optical Lithography: The Science of Microfabrication. John Wiley & Sons, 2008.
  35. [35]Jooyoung Park and Irwin W. Sandberg. Universal approximation using radial-basis-function networks. Neural Comput., 3(2):246–257, 1991.DOI
  36. [36]John Randall, Kurt G. Ronse, et al. Variable-threshold resist models for lithography simulation. In Optical Microlithography XII, 3679:176–182, 1999.DOI
  37. [37]Unique Subedi and Ambuj Tewari. Operator learning: A statistical perspective. Annu. Rev. Stat. Appl., 13(1):123–148, 2026.arxiv.org/abs/2504.03503
  38. [38]Tapas Tripura and Souvik Chakraborty. Wavelet neural operator for solving parametric partial differential equations in computational mechanics problems. Comput. Methods Appl. Mech. Eng., 404:115783, 2023.DOI
  39. [39]Zixiao Wang, Jieya Zhou, et al. TorchResist: Open-source differentiable resist simulator. In DTCO and Computational Patterning IV, 13425:134251S, 2025.arxiv.org/abs/2502.06838
  40. [40]Wei Wei, Li-Yun Fu, et al. Symmetric Fourier neural operators with translation, rotation, and scaling equivariances for wave propagation modeling. IEEE Trans. Geosci. Remote Sens., 64:5910410, 2026.DOI
  41. [41]Haoyu Yang, Zongyi Li, et al. Generic lithography modeling with dual-band optics-inspired neural networks. In Proceedings of the 59th ACM/IEEE DAC, 973–978, 2022.arxiv.org/abs/2203.08616
  42. [42]Haoyu Yang, Zongyi Li, et al. Large scale mask optimization via convolutional Fourier neural operator and litho-guided self training. arXiv:2207.04056, 2022.arxiv.org/abs/2207.04056
  43. [43]Haoyu Yang, Yibo Lin, et al. Machine learning for mask synthesis and verification. In Haoxing Ren and Jiang Hu, editors, Machine Learning Applications in Electronic Design Automation, 425–470. Springer, 2022.DOI
  44. [44]Haoyu Yang and Haoxing Ren. Enabling scalable AI computational lithography with physics-inspired models. In ASP-DAC 2023, 715–720, 2023.DOI
  45. [45]Wei Ye, Mohamed Baker Alawieh, et al. LithoGAN: End-to-end lithography modeling with generative adversarial networks. In Proceedings of the 56th DAC, 107:1–107:6, 2019.
  46. [46]Ximeng Ye, Hongyu Li, et al. On the locality of local neural operator in learning fluid dynamics. Comput. Methods Appl. Mech. Engrg., 427:117035, 2024.DOI
  47. [47]Zilin You, Zhenli Xu, and Wei Cai. MscaleFNO: Multi-scale Fourier neural operator learning for oscillatory functions and wave scattering problems. J. Comput. Phys., 547:114530, 2026.
  48. [48]Zilin You, Zhenli Xu, and Wei Cai. Multiscale Fourier neural operator for inverse wave scattering in highly oscillatory media. arXiv:2606.08448, 2026.arxiv.org/abs/2606.08448
  49. [49]Peng Yu, Weifeng Qiu, et al. Fast lithography image simulation by exploiting symmetries in lithography systems. IEEE Trans. Semicond. Manuf., 21(4):638–645, 2008.DOI
  50. [50]Xuanle Zhao, Yue Sun, et al. Enhancing solutions for complex PDEs: Introducing complementary convolution and equivariant attention in Fourier neural operators. arXiv:2311.12902, 2023.arxiv.org/abs/2311.12902
  51. [51]Su Zheng, Haoyu Yang, et al. LithoBench: Benchmarking AI computational lithography for semiconductor manufacturing. In NeurIPS, 36:30243–30254, 2023.DOI

Paper details

vlnc:W_7jxd6crk
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 12

downloads · 2

A view counts once per browser per day, a download each time the PDF is requested.

  • Mathematics

Not recorded for this paper

View statement
Looking for related papers…
Contents