betaFeedback

WorksPhysics and Astronomy

Scattering features of a self-dual spectral singularity in coupled ring resonators with balanced gain and loss

Abstract

We theoretically and numerically discuss the general scattering property of a coupled two-ring-resonators externally coupled to a straight bus waveguide. Specifically, we require one ring resonator to be light field amplifying and another to be that dissipative, where the associated attenuation and gain factors for a field amplitude after one-round trip are formed in a reciprocal pair as well as the effective wave propagation constants are same. Obtained from reciprocity and an effective PT-symmetric transfer matrix, we exploit parametrization to propose a general phase diagram, identifying overall scattering outcomes. Especially, we find that the formation of a self-dual spectral singularity, namely coherent perfect absorption-lasing (CPAL), is occurred at a certain relation of a coupling coefficient and an attenuation factor as well as resonant whispering gallery modes. Reducing light amplification and dissipation strengths in each rings narrows the spectral bandwidth associated with CPAL. We further discover that any system with the CPAL parameters would exhibit a same scattering feature: transmission extinction, CPAL, and uni-directional reflectionless at the loss ring side, with respect to an incident wavelength. Additionally, a transmission extinction can be away from the resonance. These analytical predictions are verified by electromagnetic simulations.

Introduction

Optical ring resonators are key components for on-chip photonic integrated circuits, with diverse applications across science and engineering, including optical memory [1], sensing [2, 3], quantum controlled-NOT gates [4], optical squeezing [5], and wavelength division multiplexing [6] to name a few examples.

A ring resonator externally coupled to a straight bus waveguide exhibits the critical coupling at a whispering-gallery resonance when an intrinsic loss balances an external coupling, as demonstrated experimentally [7]. Destructive interference between a directly transmitted wave and a circulating wave in a ring externally coupling to a bus waveguide results in a transmission extinction. This scattering event with an absence of both reflection and transmission uniquely represents a single-sided coherent perfect absorption, corresponding to a zero eigenvalue of the scattering matrix [8]. In a two-port slab system, coherent perfect absorption generally requires two counterpropagating incident waves with a prescribed relative phase and amplitude ratio [9, 10].

Optical gain in ring resonators can be provided by electrically pumped quantum dots [11] or multiple quantum wells [12], optically pumped rare-earth ions [13], or nonlinear processes such as stimulated Raman scattering [14] and Kerr four-wave-mixing-based parametric amplification [15]. Moreover, a lasing threshold in a single active ring system is reached when an amplification factor for a field amplitude after one round-trip equals a reciprocal of a through coupling coefficient at resonance, corresponding to a pole eigenvalue of the associated scattering matrix. Electrically pumped microring lasing has been experimentally demonstrated on a hybrid III–V/silicon platform [12].

At discrete real frequencies, spectral singularities correspond to lasing thresholds, whereas their time-reversed counterparts correspond to coherent perfect absorption [16]. When both occur at the same frequency, the system supports coherent perfect absorption and lasing (CPAL), associated with a self-dual spectral singularity [17]. These scattering results belong to non-Hermitian, where relies on material gain and loss embedded. In particularly, one well-known example with a refractive-index distribution satisfying n(r⃗)=n∗(−r⃗)n(\vec{r}) = n^{*}(-\vec{r}) signs a parity–time (PT\mathcal{PT}) symmetry, with an even real part and an odd imaginary part corresponding to spatially balanced gain and loss [18, 19]. A single microring resonator with a suitably designed PT\mathcal{PT}-symmetric grating that is externally coupled to a bus waveguide can support simultaneous coherent perfect absorption and lasing (CPAL) at discrete frequencies [20]. At each CPAL point, a scattering-matrix zero and pole coincide at the same real frequency, forming a self-dual spectral singularity. Related studies have demonstrated that due to an unbalanced coupling strength between clockwise and counterclockwise modes of the ring, that suppresses circulation in one direction while enhancing it in the other [21]. In a coupled two ring system, at the PT\mathcal{PT} symmetry broken phase, it can localize a supermode predominantly in the gain ring, enabling lasing when its net gain exceeds threshold [22], as experimentally demonstrated in an optically pumped InGaAsP quantum-well platform [23, 24]. For the aforementioned systems, transmission through the bus waveguide remains reciprocal for incidence from either side in both the PT\mathcal{PT}-symmetric and PT\mathcal{PT}-broken phases, given that the system operates in the linear regime. However, in some broken-symmetry phases, as a result of a strong field localization occurred in the gain ring further enhances nonlinear effects, enabling nonreciprocal transmission [25].

In this work, we investigate two mutually coupled ring resonators with one light wave amplifying and another light wave dissipative, externally coupled to a common straight bus waveguide, as shown in Figure 1. We consider identical wave propagation constants in the two rings, an reciprocal pair of amplification and attenuation factors, and same unitary directional couplers describing evanescent coupling regimes. Under these conditions as well as analyzing from a transfer-matrix formulation, we show that the system exhibits effective PT\mathcal{PT}-symmetry even when the refractive-index distribution used in our full-wave electromagnetic simulations does not meet n(r⃗)=n∗(−r⃗)\mathbf{n}(\vec{r}) = \mathbf{n}^{*}(-\vec{r}).

Schematic of two mutually coupled ring resonators with gain and loss

Figure 1. Schematic of two mutually coupled ring resonators, with gain in the left ring (LL) and loss in the right ring (RR), each coupled to a common straight bus waveguide. Both rings have radius ρ\rho and waveguide width ww. The clockwise and counterclockwise circulating field amplitudes are denoted by uL,Ru^{L,R} and vL,Rv^{L,R}, respectively. Coupling regions 1, 2, and 3 correspond to the left ring–bus, inter-ring, and right ring–bus couplers, respectively. The labels − and + indicate the input and output sides of each coupler for the corresponding propagation direction. In the two-port bus waveguide, AL,RA^{L,R} and CL,RC^{L,R} denote right-propagating field amplitudes, whereas BL,RB^{L,R} and DL,RD^{L,R} denote left-propagating field amplitudes.

Reciprocity in our system is conserved. Consequently, we can parameterize the transfer matrix in terms of the coupler through-coupling coefficient, the attenuation factor, and the propagation phase. As a result, we propose a general phase diagram to identify PT\mathcal{PT} symmetry phase, symmetry breaking point, and PT\mathcal{PT} symmetry broken phase. Moreover, we also derive analytical conditions for a transmission extinction, coherent perfect absorption and lasing (CPAL), and unidirectional reflectionlessness. Transmission extinction and unidirectional reflectionlessness can occur away from resonance, whereas CPAL occurs at a whispering-gallery resonance when the coupling coefficient and the round-trip attenuation factor satisfy a specific relation. Notably, systems satisfying the CPAL parameter condition exhibit a common sequence of scattering feature as the propagation phase varies: transmission extinction, unidirectional reflection for incidence from the loss-ring side, and CPAL. This sequence recurs periodically in the propagation phase and, when dispersion is neglected in frequency.

sion is neglected in frequency. We validate these analytical predictions using full-wave electromagnetic simulations in COMSOL Multiphysics. Our work provides design guidelines for implementing coupled ring resonators with unique scattering integrated into silicon-photonic platforms.

Theory

We consider two mutually coupled ring resonators, each externally coupled to a common straight bus waveguide, as shown schematically in Figure 1. Both ring resonators have the same radius ρ\rho and width ww, with the left ring containing a gain medium and the right ring containing a lossy medium. The bus waveguide has two ports, allowing excitation from either side. All waveguides are assumed to be operated at a single mode. The light field can be approximately represented by Eei(ϕ−ωt)E e^{i(\phi-\omega t)}, where EE is the complex field amplitude and ϕ\phi is the effective propagation phase. Throughout this work, we adopt the time dependence e−iωte^{-i\omega t}.

The system contains three wave coupling regions, labeled 1, 2, and 3, where adjacent waveguides interact through overlapping evanescent fields. Each coupling region is modeled as a lossless directional coupler as well as is described by the same symmetric and unitary coupling matrix T=[τiκiκτ]\mathcal{T} = \begin{bmatrix} \tau& i\kappa\\ i\kappa& \tau\end{bmatrix}. This unitary coupling matrix had been experimentally demonstrated in Ref. [7]. We note that τ\tau and κ\kappa are the real amplitude through- and cross-coupling coefficients, respectively, also satisfying τ2+κ2=1\tau^2 + \kappa^2 = 1.

Each ring supports clockwise and counterclockwise circulating modes, denoted by uL,Ru^{L,R} and vL,Rv^{L,R}, respectively, where the superscripts LL and RR represent the left and right rings. At the inter-ring coupling region, the clockwise mode in either ring couples to the counterclockwise mode in the other, yielding

[uL(2+),vR(2+)]T=T[uL(2−),vR(2−)]T\begin{bmatrix} u^{L}(2+),v^{R}(2+) \end{bmatrix}^{T} = \mathcal{T}\begin{bmatrix} u^{L}(2-),v^{R}(2-) \end{bmatrix}^{T}

and

[vL(2+),uR(2+)]T=T[vL(2−),uR(2−)]T.\begin{bmatrix} v^{L}(2+),u^{R}(2+) \end{bmatrix}^{T} = \mathcal{T}\begin{bmatrix} v^{L}(2-),u^{R}(2-) \end{bmatrix}^{T}.

Here, the superscripts −- and ++ on the coupling-region denote the input and output sides, respectively, for each propagation direction.

At the coupling region between the left ring and the bus waveguide, the clockwise and counterclockwise modes satisfy

[uL(1+),BL]T=T[uL(1−),DL]T\begin{bmatrix} u^{L}(1+),B^{L} \end{bmatrix}^{T} = \mathcal{T}\begin{bmatrix} u^{L}(1-),D^{L} \end{bmatrix}^{T}

and

[vL(1+),CL]T=T[vL(1−),AL]T,\begin{bmatrix} v^{L}(1+),C^{L} \end{bmatrix}^{T} = \mathcal{T}\begin{bmatrix} v^{L}(1-),A^{L} \end{bmatrix}^{T},

respectively. Similarly, at the coupling region between the right ring and the bus waveguide, we have

[uR(3+),BR]T=T[uR(3−),DR]T,\begin{bmatrix} u^{R}(3+),B^{R} \end{bmatrix}^{T} = \mathcal{T}\begin{bmatrix} u^{R}(3-),D^{R} \end{bmatrix}^{T},

and

[vR(3+),CR]T=T[vR(3−),AR]T,\begin{bmatrix} v^{R}(3+),C^{R} \end{bmatrix}^{T} = \mathcal{T}\begin{bmatrix} v^{R}(3-),A^{R} \end{bmatrix}^{T},

respectively.

We denote the real effective propagation constants in the left and right rings by kLk_L and kRk_R, respectively. The corresponding field amplitude factors, after one round-trip, are αL>1\alpha_L > 1 for the amplifying left ring and αR<1\alpha_R < 1 for the dissipative right ring. We impose equal propagation constants kL=kRk_L = k_R and reciprocal round-trip amplitude factors αLαR=1\alpha_L\alpha_R = 1.

Combining these coupling relations and required conditions yields the overall transfer matrix relation:

\begin{pmatrix} C^{R} \\ D^{R} \end{pmatrix} = M\begin{pmatrix} A^{L} \\ B^{L} \end{pmatrix}, \qquad M = \begin{pmatrix} M_{11} & M_{12} \\ M_{21} & M_{22} \end{pmatrix}. \tag*{(1)}\end{pmatrix}

Here, MM relates the field amplitudes at the left and right leads of the bus waveguide. Its explicit elements and detailed derivation are provided in Appendix A.

Phase diagram

Inspection of MM reveals that M22=M11∗M_{22}=M_{11}^{*}, M12∗=−M12M_{12}^{*}=-M_{12}, and M21∗=−M21M_{21}^{*}=-M_{21}. In addition, det⁡M=1\det M=1 ensures a reciprocal transmission. These relations bring M−1=M∗M^{-1}=M^{*}, demonstrating the effective PT\mathcal{PT} symmetry of our studying system. As a result, these constraints allow us to parameterize MM following [26, 27].

We consider the scattering matrix SS through

\begin{bmatrix} C^{R} \\ B^{L} \end{bmatrix}=S\begin{bmatrix} A^{L} \\ D^{R} \end{bmatrix},\qquad S=\frac{1}{M_{22}}\begin{bmatrix} 1 & M_{12} \\ -M_{21} & 1 \end{bmatrix}. \tag*{(2)}\end{bmatrix}

We then write M12=iμM_{12}=i\mu and M21=iνM_{21}=i\nu, where μ\mu and ν\nu are real, and define η=μν\eta=\mu\nu. The corresponding scattering eigenvalues and right scattering eigenvectors are

s±=1±ηM22andψ±=[iμ,±η]T,s_{\pm}=\frac{1\pm\sqrt{\eta}}{M_{22}}\quad\text{and}\quad\psi_{\pm}=\begin{bmatrix} i\mu,\pm\sqrt{\eta} \end{bmatrix}^{T},

respectively. The components of ψ±\psi_{\pm} specify the relative amplitudes and phases of the incident fields [AL,DR]T\begin{bmatrix} A^{L},D^{R}\end{bmatrix}^{T}. By analyzing scattering eigenvalues and eigenvectors, we can state that the regimes η<0\eta<0 and 0<η<10<\eta<1 correspond to the PT\mathcal{PT}-symmetric and PT\mathcal{PT}-symmetry broken phases, respectively, while the corresponding reciprocal transmission coefficient is defined as σ≡CRAL=BLDR\sigma\equiv\frac{C^{R}}{A^{L}}=\frac{B^{L}}{D^{R}}. The transmittance T≡∣σ∣2T\equiv|\sigma|^{2} gives T<1T<1 and T>1T>1 in PT\mathcal{PT}-symmetric and PT\mathcal{PT}-symmetry broken phases, respectively [26, 27]. At η=0\eta=0, provided that exactly one of μ\mu and ν\nu vanishes, the system reaches a PT\mathcal{PT}-exceptional point with T=1T=1, also known for symmetry breaking point [28, 29]. Our PT\mathcal{PT}-symmetry breaking point is a second-order exceptional point of the scattering matrix, where both eigenvalues and eigenvectors coalesce [30, 31]. The detailed derivation and classification are provided in Appendix § 2.2.

Accordingly, Figure 2 presents scattering phase diagrams in the (τ,αR)(\tau,\alpha_R) plane for selected values of the round-trip effective propagation phase φ≡2πkRρ=[1,2,3,4,5,2π]\varphi\equiv2\pi k_R\rho=[1,2,3,4,5,2\pi]. We write kR=nringk0k_R=n_{\mathrm{ring}}k_0, where nringn_{\mathrm{ring}} is the effective refractive index of two circulating modes for both rings, k0=2πλk_0=\frac{2\pi}{\lambda} is the vacuum wavenumber, and λ\lambda is an incident wavelength. In Figure 2, the yellow and red regions represent the PT\mathcal{PT}-symmetric and PT\mathcal{PT}-broken scattering phases, respectively, separated by exceptional-point boundaries marked by green and purple curves. These diagrams provide a unified description of the scattering behavior for systems satisfying the assumptions of our model, irrespective of their specific geometric and material parameters.

Scattering phase diagrams in the $(\tau,\alpha_R)$ plane for selected values of the round-trip propagation phase $\varphi \equiv 2\pi k_R\rho$

Figure 2. Scattering phase diagrams in the (τ,αR)(\tau,\alpha_R) plane for selected values of the round-trip propagation phase φ≡2πkRρ\varphi\equiv2\pi k_R\rho: (a) φ=1\varphi= 1, (b) φ=2\varphi= 2, (c) φ=3\varphi= 3, (d) φ=4\varphi= 4, (e) φ=5\varphi= 5, and (f) φ=2π\varphi= 2\pi. Here, τ\tau is the through-coupling coefficient and αR\alpha_R is the round-trip attenuation factor. Yellow and red regions denote the PT\mathcal{PT}-symmetric (T<1T < 1) and PT\mathcal{PT}-broken (T>1T > 1) scattering phases, respectively. The purple and green curves mark exceptional-point boundaries (T=1T = 1). Black dashed curves indicate transmission extinction (T=0T = 0), while the blue curve in (f) indicates coherent perfect absorption and lasing (CPAL).

Discussion

General unitary relation

The reflection coefficients for an incidence from the right (loss-ring side) and left (gain-ring side) sides are rR≡CRDR∣AL=0=M12M22r_R\equiv\left.\frac{C^{R}}{D^{R}}\right|_{A^{L}=0}=\frac{M_{12}}{M_{22}} and rL≡BLAL∣DR=0=−M21M22r_L\equiv\left.\frac{B^{L}}{A^{L}}\right|_{D^{R}=0}=-\frac{M_{21}}{M_{22}}, respectively. The corresponding reflectances are RR=∣rR∣2R_R=|r_R|^2 and RL=∣rL∣2R_L=|r_L|^2. Combining the parameterization with reciprocity and PT\mathcal{PT} symmetry yields the generalized unitarity relation, rRrL=σ2(1−1∣σ∣2)r_Rr_L=\sigma^2(1-\frac{1}{|\sigma|^2}), already proposed in [26]. Taking the squared modulus yields the generalized conservation relation RLRR=(T−1)2R_LR_R=(T-1)^2 for reciprocal, one-dimensional PT\mathcal{PT}-symmetric two-port systems.

Uni-directional reflectionless, A self-dual spectral singularity, and transmission extinction

To have a reflectionless at the right side, it should meet rR=0r_R=0, yielding

τ=2αRcos⁡[φ]−αR2.(3)\tau=\sqrt{2\alpha_R\cos[\varphi]-\alpha_R^2}. \tag*{(3)}

The generalized conservation relation further implies T=1T=1. Since τ\tau is real and bounded by 0<τ<10<\tau<1, the allowed attenuation factor must additionally satisfy αR<2cos⁡φ\alpha_R<2\cos\varphi. In Figure 2, the corresponding parameter combinations of (τ,αR,φ)(\tau,\alpha_R,\varphi) satisfying rR=0r_R=0 are indicated by the green curves, which coincide with the exceptional-point boundaries, as expected.

Similarly, a reflectionlessness for incidence from the left requires rL=0r_L=0, yielding

τ=1αR2αRcos⁡[φ]−1.(4)\tau=\frac{1}{\alpha_R}\sqrt{2\alpha_R\cos[\varphi]-1}. \tag*{(4)}

The generalized conservation relation again implies T=1T=1. For the requirement of real τ\tau and 0<τ<10<\tau<1, it demands cos⁡φ>12αR\cos\varphi>\frac{1}{2\alpha_R}. This condition is achievable only for αR>1/2\alpha_R>1/2. The purple curves in Figure 2 indicate rL=0r_L=0 which coincide with the exceptional-point boundaries and occur only for αR>1/2\alpha_R>1/2, as expected.

We further examine whether bidirectional reflectionlessness, rR=0r_R=0 and rL=0r_L=0, can occur. Combining the two reflectionless conditions yields (1−τ2)(1−αR2)=0(1-\tau^2)(1-\alpha_R^2)=0. For 0<τ<10<\tau<1, this requires αR=1\alpha_R=1, with τ=2cos⁡φ−1\tau=\sqrt{2\cos\varphi-1}. Thus, bidirectional reflectionlessness is excluded in the balanced gain-loss regime considered here, since 0<αR<10<\alpha_R<1.

Coherent perfect absorption (CPA) requires M11=0M_{11}=0, which gives αR+τ2e−iφ[−1+αR(e−iφ−αR)]=0\alpha_R+\tau^2e^{-i\varphi}[-1+\alpha_R(e^{-i\varphi}-\alpha_R)]=0. Similarly, the lasing threshold requires M22=0M_{22}=0, yielding αR+τ2eiφ[−1+αR(eiφ−αR)]=0\alpha_R+\tau^2e^{i\varphi}[-1+\alpha_R(e^{i\varphi}-\alpha_R)]=0. PT\mathcal{PT} symmetry intrinsically imposes M11=M22∗M_{11}=M_{22}^{*}, as a result of their zero solutions being simultaneously satisfied to give CPAL.

Since 0<αR<10<\alpha_R<1 and 0<τ<10<\tau<1, the resulting CPAL conditions are

{φ=2mπ,m=1,2,3,…,τ2=αR1+αR2−αR.(5)\begin{cases} \varphi=2m\pi, & m=1,2,3,\ldots,\\ \tau^2=\dfrac{\alpha_R}{1+\alpha_R^2-\alpha_R}. \tag*{(5)} \end{cases}

Thus, CPAL occurs at a whispering-gallery resonance when the through-coupling coefficient and the round-trip attenuation factor satisfy Eq. (5). Consequently, at the CPAL point, both reflectances RRR_R and RLR_L and the transmittance TT diverge under a single-sided excitation. The corresponding parameter combinations are indicated by the blue curve in Figure 2(f).

We next consider transmission extinction, i.e., σ=0\sigma=0, which occurs when

τ4+(−1+6τ2−3τ4+2τ6)αR2+τ4αR4+2τ2αR[−(1+τ2)(1+αR2)cos⁡φ+αRcos⁡(2φ)]=0,(6)\tau^4+(-1+6\tau^2-3\tau^4+2\tau^6)\alpha_R^2+\tau^4\alpha_R^4+2\tau^2\alpha_R\left[-(1+\tau^2)(1+\alpha_R^2)\cos\varphi+\alpha_R\cos(2\varphi)\right]=0, \tag*{(6)}

provided that the numerator of σ\sigma remains nonzero. A transmission extinction (T=0T=0) lies in the PT\mathcal{PT}-symmetric phase, supporting by the corresponding parameter combinations with dashes black lines in Figure 2(f). With T=0T=0, the generalized conservation relation yields RLRR=1R_LR_R=1, so that the left and right reflectances form a reciprocal pair.

Although unidirectional reflectionlessness, transmission extinction, and CPAL cannot occur at the same incident wavelength, suitably chosen system parameters allow these phenomena to occur at distinct values of the round-trip propagation phase φ\varphi, corresponding to different incident wavelengths λ\lambda. As an example, Figure 3(a) shows the scattering response for τ=0.5\tau=0.5 and αR=0.6\alpha_R=0.6. Transmission extinction (T=0T=0) occurs at φ≈4.74\varphi\approx4.74, 7.837.83, 11.0211.02, and 14.1114.11. Right-incidence reflectionlessness (RR=0R_R=0) occurs at φ≈5.25\varphi\approx5.25, 7.327.32, 11.5011.50, and 13.6013.60, whereas left-incidence reflectionlessness (RL=0R_L=0) occurs at φ≈5.85\varphi\approx5.85, 6.706.70, 12.1312.13, and 12.9912.99. Each set of scattering features repeats with a phase period of 2π2\pi.

Transmittance $T$ (black), right-incidence reflectance $R_R$ (green), left-incidence reflectance $R_L$ (purple), and coherent perfect absorption and lasing

Figure 3. Transmittance TT (black), right-incidence reflectance RRR_R (green), and left-incidence reflectance RLR_L (purple) as functions of the round-trip propagation phase φ\varphi. (a) For τ=0.5\tau=0.5 and αR=0.6\alpha_R=0.6, transmission extinction and unidirectional reflectionlessness from either side occur at distinct phases. (b) For αR=0.35\alpha_R=0.35 and τ≈0.6731\tau\approx0.6731, CPAL occurs at the resonances φ=2mπ\varphi=2m\pi. Each CPAL point is symmetrically flanked by right-incidence reflectionlessness and transmission extinction on both sides. (c) Coherent perfect absorption (blue) and lasing (red) under the corresponding excitation conditions for the same parameters as in (b). These scattering features recur with a period of 2π2\pi in φ\varphi.

We next consider a system satisfying the CPAL condition, with αR=0.35\alpha_R=0.35 and τ≈0.6731\tau\approx0.6731, as shown in Figure 3(b). At the resonance φ=2π\varphi=2\pi, the transmittance TT and both reflectances RRR_R and RLR_L diverge under single-sided excitation in the linear model, indicating the lasing threshold associated with CPAL.

To characterize the scattering response under coherent two-sided excitation, we define the ratio of total outgoing to total incoming power in the common bus waveguide as Ψ=∣CR∣2+∣BL∣2∣AL∣2+∣DR∣2\Psi=\dfrac{|C^R|^2+|B^L|^2}{|A^L|^2+|D^R|^2}, where the port amplitudes are conveniently power-normalized. For incident light fields in the bus waveguide satisfying DR=M21ALD^R=M_{21}A^L with the appropriate relative amplitudes and phases, we then have ΨCPA=∣M11∣21+∣M21∣2\Psi_{\mathrm{CPA}}=\dfrac{|M_{11}|^2}{1+|M_{21}|^2}, which vanishes at the CPAL point, where M11=0M_{11}=0. The numerical calculation is verified in a blue line of Figure 3(c). For comparison, equal-amplitude, in-phase excitation, DR=ALD^R=A^L, gives Ψequal=∣1+M12∣2+∣1−M21∣22∣M22∣2\Psi_{\mathrm{equal}}=\dfrac{|1+M_{12}|^2+|1-M_{21}|^2}{2|M_{22}|^2}, as shown in a red line of Figure 3(b). Unless the excitation satisfies the CPA input condition, any deviation leads to Ψ\Psi amplified at the CPAL point.

Interestingly, Figure 3(b) shows transmission extinction (T=0T=0) and right-incidence reflectionlessness (RR=0R_R=0) near the CPAL point. To understand these accompanying scattering features, we examine the transmission and reflection coefficients under the CPAL parameter constraint specified in Eq. (5).

Scattering features as functions of the round-trip propagation phase $\varphi$ under the CPAL parameter constraint

Figure 4. Scattering features as functions of the round-trip propagation phase φ\varphi under the CPAL parameter constraint, with (a) αR=0.1\alpha_{\mathrm{R}}=0.1, (b) αR=0.2\alpha_{\mathrm{R}}=0.2, (c) αR=0.3\alpha_{\mathrm{R}}=0.3, (d) αR=0.5\alpha_{\mathrm{R}}=0.5, (e) αR=0.7\alpha_{\mathrm{R}}=0.7, and (f) αR=0.8\alpha_{\mathrm{R}}=0.8. Dark black, red, and blue dots indicate CPAL at φ=2mπ\varphi=2m\pi, right-incidence reflectionlessness (rR=0r_{\mathrm{R}}=0), and transmission extinction (T=0T=0), respectively. Yellow and red bars denote the PT\mathcal{PT}-symmetric and PT\mathcal{PT}-broken phases, respectively. Left-incidence reflectionlessness (rL=0r_{\mathrm{L}}=0) is absent under the CPAL parameter constraint.

Substituting this constraint into the condition rR=0r_{\mathrm{R}}=0 yields φ=2mπ±φR\varphi=2m\pi\pm\varphi_{\mathrm{R}}, m∈Zm\in\mathbb{Z}, where

φR=arccos⁡[αR3−αR2+αR+12(αR2−αR+1)].(7)\varphi_{\mathrm{R}}=\arccos\left[\frac{\alpha_{\mathrm{R}}^{3}-\alpha_{\mathrm{R}}^{2}+\alpha_{\mathrm{R}}+1}{2(\alpha_{\mathrm{R}}^{2}-\alpha_{\mathrm{R}}+1)}\right]. \tag*{(7)}

For 0<αR<10<\alpha_{\mathrm{R}<1}, we give 0<φR<π30<\varphi_{\mathrm{R}}<\frac{\pi}{3}. Thus, right-incidence reflectionless points occur symmetrically on either side of each CPAL resonance, with phase offsets smaller than π/3\pi/3.

Under the CPAL parameter constraint, the condition rL=0r_{\mathrm{L}}=0 requires cos⁡φL=αR3+αR2−αR+12(αR3−αR2+αR)\cos\varphi_{\mathrm{L}}=\frac{\alpha_{\mathrm{R}}^{3}+\alpha_{\mathrm{R}}^{2}-\alpha_{\mathrm{R}}+1}{2(\alpha_{\mathrm{R}}^{3}-\alpha_{\mathrm{R}}^{2}+\alpha_{\mathrm{R}})}. However, through analysis, we can discover that for 0<αR<10<\alpha_{\mathrm{R}}<1, no real propagation phase satisfies rL=0r_{\mathrm{L}}=0. This remarkable result reveals that the CPAL parameter constraint excludes left-incidence reflectionlessness (the gain ring side), in contrast to the example with RL=0R_{\mathrm{L}}=0 in Figure 3(a), whose parameters do not satisfy this constraint.

We next examine transmission extinction (T=0T=0) under the CPAL parameter constraint. The corresponding transmission extinction condition reduces to φT=\varphi_{\mathrm{T}}=

arccos [B±B2−4AC2A]\left[\frac{B\pm\sqrt{B^{2}-4AC}}{2A}\right] where A=4t2αR2A=4t^{2}\alpha_{\mathrm{R}}^{2}, B=2t2αR(1+t2)(1+αR2)B=2t^{2}\alpha_{\mathrm{R}}(1+t^{2})(1+\alpha_{\mathrm{R}}^{2}), and C=t4+(−1+6t2−3t4+2t6)αR2−2t2αR2+t4αRC=t^{4}+(-1+6t^{2}-3t^{4}+2t^{6})\alpha_{\mathrm{R}}^{2}-2t^{2}\alpha_{\mathrm{R}}^{2}+t^{4}\alpha_{\mathrm{R}}.

φT=arccos⁡[B−B2−4AC2A](8)\varphi_{\mathrm{T}}=\arccos\left[\frac{B-\sqrt{B^{2}-4AC}}{2A}\right] \tag*{(8)}

However, for 0<αR<10<\alpha_{\mathrm{R}}<1, only the root yields a real propagation phase. The transmission extinction points are consequently located at

φ=2mπ±φT,m∈Z.(9)\varphi=2m\pi\pm\varphi_{\mathrm{T}},\qquad m\in\mathbb{Z}. \tag*{(9)}

The round-trip phase separation between the two transmission extinction points bracketing a CPAL resonance is thus

ΔφT=2φT=2arccos⁡[B−B2−4AC2A].(10)\Delta\varphi_{\mathrm{T}}=2\varphi_{\mathrm{T}}=2\arccos\left[\frac{B-\sqrt{B^{2}-4AC}}{2A}\right]. \tag*{(10)}

Finally, Figure 3 summarizes the locations of transmission extinction, right-incidence reflectionlessness, and CPAL, together with the associated PT\mathcal{PT} scattering phases, as functions of φ\varphi under the CPAL parameter constraint. The round-trip attenuation factors are (a) αR=0.1\alpha_R = 0.1, (b) αR=0.2\alpha_R = 0.2, (c) αR=0.3\alpha_R = 0.3, (d) αR=0.5\alpha_R = 0.5, (e) αR=0.7\alpha_R = 0.7, and (f) αR=0.8\alpha_R = 0.8.

As φ\varphi increases through each resonance φ=2mπ\varphi= 2m\pi, these systems exhibit a common sequence of scattering features: transmission extinction, right-incidence reflectionlessness, CPAL, right-incidence reflectionlessness, and transmission extinction. This sequence repeats with a phase period of 2π2\pi. Furthermore, the phase separation ΔφT\Delta\varphi_T decreases as αR\alpha_R approaches unity, corresponding to weaker round-trip amplification and attenuation, consistent with Eq. (10).

Electromagnetic Simulations

To verify our analytical results, we perform electromagnetic simulations using COMSOL Multiphysics. We first consider a single ring resonator coupled to a straight bus waveguide, with a lossless core material in the ring. This configuration is used to identify the whispering gallery resonances and extract the through-coupling coefficient τ\tau and round-trip attenuation factor αR\alpha_R. The resonance condition is determined by the round-trip propagation phase, whereas critical coupling additionally requires the round-trip attenuation factor to match the magnitude of the through-coupling coefficient.

We distinguish the material refractive index from the effective refractive index of a guided mode. The latter determines the propagation phase in the ring and bus waveguides. Both waveguides have the same width and core and cladding materials. Our numerical results indicate that the real parts of their effective refractive indices are approximately equal for the configurations considered here. Even with lossless constituent materials, the ring can exhibit attenuation through bending-induced radiation and other leakage loss. Such attenuation can be represented by an imaginary part of the effective propagation constant and incorporated into the round-trip field-amplitude factor αR\alpha_R.

The coupling coefficient τ\tau is controlled primarily by the gap between adjacent waveguides. Within the coupling regime considered here, reducing the gap enhances cross coupling and decreases the through-coupling coefficient τ\tau. The round-trip factors αR\alpha_R and αL\alpha_L are controlled primarily by introducing material loss and gain, respectively. Increasing the loss decreases αR\alpha_R, whereas increasing the gain increases αL\alpha_L. Although these adjustments can also affect the modal indices and coupling, our numerical results indicate that the coupling and round-trip amplitude factors can be tuned approximately independently over the parameter range considered.

The parameter extraction and inverse-design procedure for the single-ring configuration are detailed in Appendix VIII. Using the calibrated components, we then construct the two mutually coupled rings, each coupled to the common bus waveguide, and verify the resulting scattering response.

To test the predicted CPAL response, we consider τ≈0.858\tau\approx0.858 and αR≈0.55\alpha_R \approx0.55, which lie close to the CPAL parameter condition. The left panel of Figure 5(a) shows the analytical spectra, with a pronounced divergence of the transmittance TT and right-incidence reflectance RRR_R at the resonance near λ0=1.559 μm\lambda_0 = 1.559\,\mu\mathrm{m}. The right panel compares the analytical results (solid curves) with electromagnetic simulations performed using COMSOL Multiphysics (blue stars for TT and red circles for RRR_R). Material dispersion is neglected in these simulations. The numerical results reproduce the main spectral features, including transmission extinction and right-incidence reflectionlessness on either side of the central resonance.

Analytical and stimulating scattering responses of two mutually coupled rings externally coupled to a bus waveguide

Figure 5. Analytical and stimulating scattering responses of two mutually coupled rings externally coupled to a bus waveguide. (a) Transmittance TT (blue) and right-incidence reflectance RRR_R (red) for τ≈0.858\tau\approx0.858 and αR≈0.55\alpha_R \approx0.55, satisfying the CPAL parameter constraint. The left panel shows the resonant divergence near λ≈1.558 μm\lambda\approx1.558\,\mu\mathrm{m} predicted by our analytical model, while the right panel highlights the accompanying transmission extinction and right-incidence reflectionlessness. Here blue crosses and red circles are obtained by the COMSOL Multiphysics simulation. (b) Corresponding spectra for τ=0.89\tau= 0.89 and αR=0.6875\alpha_R = 0.6875, which do not satisfy the CPAL parameter constraint. The right panel shows an enlarged view of transmission extinction and right-incidence reflectionlessness. Solid curves represent analytical results, while blue stars and red circles denote COMSOL Multiphysics results for TT and RRR_R, respectively. (c)–(e) Simulated electric-field magnitude distributions under right incidence: (c) near the CPAL resonance in (a), (d) at transmission extinction in (a), and (e) at transmission extinction in (b). Red arrows indicate the incident-wave direction.

Figure 5(c) shows the simulated electric-field magnitude near the CPAL resonance under excitation from the right. The field is strongly enhanced within the rings, reaching values on the order of 107 V/m10^7\,\mathrm{V/m} of the electric field.

Figure 5(d) shows the field distribution at λ0=1.5569 μm\lambda_0 = 1.5569\,\mu\mathrm{m}, corresponding to transmission extinction. The strongly suppressed field in the left output segment of the bus waveguide supports the predicted vanishing transmittance. This extinction results from destructive interference between the directly transmitted field and the fields coupled back into the bus waveguide from the rings. Compared with Figure 5(c), the pronounced interference fringes on the right side indicate a substantial reflected field. At this wavelength, the simulated field magnitude in the loss ring can exceed that in the gain ring.

For comparison, we consider a second system with τ=0.89\tau= 0.89 and αR=0.6875\alpha_R = 0.6875, which does not satisfy the CPAL parameter condition. Figure 5(b) compares the analytical spectra with the COMSOL results using the same line and symbol conventions as in Figure 5(a). Unlike the CPAL case, both TT and RRR_R exhibit a local minimum near the central resonance at λ0≈1.559 μm\lambda_0 \approx1.559\,\mu\mathrm{m}, flanked by two peaks. Transmission extinction and right-incidence reflectionlessness also occur away from the central resonance, as highlighted in the right panel. The simulated extinction and reflectionless wavelengths are approximately 1.5571 μm1.5571\,\mu\mathrm{m} and 1.55743 μm1.55743\,\mu\mathrm{m}, respectively. The field distribution at the extinction transmission wavelength, shown in Figure 5(e), again exhibits strongly suppressed transmission into the left output segment, consistent with the analytical prediction.

The simple ring-bus architecture considered here builds on established silicon photonic components compatible with complementary metal–oxide–semiconductor (CMOS) fabrication technologies [32]. Active microring devices have also been demonstrated through hybrid III–V/silicon integration [12]. These advances suggest a route toward realizing the predicted scattering phenomena in silicon photonic integrated circuits.

Conclusion

We have analytically established an effective PT\mathcal{PT} symmetry in two mutually coupled ring resonators. Combining this symmetry with reciprocity, we developed a parametrized phase diagram that classifies the scattering phases and identifies transmission extinction and reflectionlessness for incidence from either side. CPAL occurs at a whispering-gallery resonance when the through-coupling coefficient and the round-trip attenuation factor satisfy a specific relation.

Under this CPAL parameter constraint, all systems exhibit a common sequence of scattering features around each resonance: transmission extinction, loss-side reflectionlessness, CPAL, loss-side reflectionlessness, and transmission extinction. This sequence repeats periodically in the round-trip propagation phase. We derived the phase separation between the extinction points bracketing each CPAL resonance, which narrows as the round-trip gain and loss factors become weaker. We also showed that gain-side reflectionlessness is excluded under the CPAL parameter constraint but can occur for other parameter combinations. Electromagnetic simulations using COMSOL Multiphysics reproduce the principal analytical scattering features. Together with established ring-resonator integration technologies, our work provides design guidelines for exploring CPAL and its accompanying scattering features in silicon photonic platforms.

Derivation of the Transfer Matrix

At the inter-ring coupling region, the counterclockwise mode in the left ring couples to the clockwise mode in the right ring according to

\begin{pmatrix} u^{L}(2+) \\ u^{R}(2+) \end{pmatrix} = \mathcal{T}\begin{pmatrix} u^{L}(2-) \\ u^{R}(2-) \end{pmatrix}. \tag*{(11)}\end{pmatrix}

Using τ2+κ2=1\tau^{2}+\kappa^{2}=1 and rearranging these relations, we obtain

\begin{pmatrix} u^{R}(2+) \\ u^{R}(2-) \end{pmatrix} = M_{1}\begin{pmatrix} u^{L}(2+) \\ u^{L}(2-) \end{pmatrix}, \tag*{(12)}\end{pmatrix}

where

M1=1iκ(τ−11−τ).(13)M_{1}=\frac{1}{i\kappa}\begin{pmatrix} \tau& -1 \\ 1 & -\tau\end{pmatrix}. \tag*{(13)}

Next, we consider the coupling between the clockwise mode in the right ring and the left-propagating mode in the bus waveguide:

\begin{pmatrix} u^{R}(3+) \\ B^{R} \end{pmatrix} = \mathcal{T}\begin{pmatrix} u^{R}(3-) \\ D^{R} \end{pmatrix}. \tag*{(14)}\end{pmatrix}

Rearranging this equation gives

\begin{pmatrix} D^{R} \\ B^{R} \end{pmatrix} = \frac{1}{i\kappa}\begin{pmatrix} 1 & -\tau\\ \tau& -1 \end{pmatrix}\begin{pmatrix} u^{R}(3+) \\ u^{R}(3-) \end{pmatrix}. \tag*{(15)}\end{pmatrix}

Propagation along the right ring relates the field amplitudes at coupling regions 2 and 3 through

uR(3−)=αR3/4ei3πkRρ/2uR(2+),(16)u^{R}(3^{-})=\alpha_{R}^{3/4}e^{i3\pi k_{R}\rho/2}u^{R}(2^{+}), \tag*{(16)}
uR(2−)=αR1/4eiπkRρ/2uR(3+),(17)u^{R}(2^{-})=\alpha_{R}^{1/4}e^{i\pi k_{R}\rho/2}u^{R}(3^{+}), \tag*{(17)}

where ρ\rho is the ring radius and αR\alpha_{R} is the round-trip field-amplitude attenuation factor. The fractional powers of αR\alpha_{R} assume uniformly distributed attenuation along the ring.

Substituting these propagation relations yields

\begin{pmatrix} D^{R} \\ B^{R} \end{pmatrix}=M_{2}\begin{pmatrix} u^{R}(2^{-}) \\ u^{R}(2^{+}) \end{pmatrix}, \tag*{(18)}\end{pmatrix}

with

M2=1iκ(αR−1/4e−iπkRρ/2−ταR3/4ei3πkRρ/2ταR−1/4e−iπkRρ/2−αR3/4ei3πkRρ/2).(19)M_{2}=\frac{1}{i\kappa}\begin{pmatrix} \alpha_{R}^{-1/4}e^{-i\pi k_{R}\rho/2} & -\tau\alpha_{R}^{3/4}e^{i3\pi k_{R}\rho/2} \\ \tau\alpha_{R}^{-1/4}e^{-i\pi k_{R}\rho/2} & -\alpha_{R}^{3/4}e^{i3\pi k_{R}\rho/2} \end{pmatrix}. \tag*{(19)}

Propagation in the left ring gives

vL(2−)=αL1/4eiπkLρ/2vL(1+),(20)v^{L}(2^{-})=\alpha_{L}^{1/4}e^{i\pi k_{L}\rho/2}v^{L}(1^{+}), \tag*{(20)}
vL(1−)=αL3/4ei3πkLρ/2vL(2+)(21)v^{L}(1^{-})=\alpha_{L}^{3/4}e^{i3\pi k_{L}\rho/2}v^{L}(2^{+}) \tag*{(21)}

where αL\alpha_{L} is defined as the round-trip field-amplitude amplification factor and assumed to be uniformly distributed along the ring.

These relations can be written as

\begin{pmatrix} v^{L}(2^{-}) \\ v^{L}(2^{+}) \end{pmatrix}=M_{3}\begin{pmatrix} v^{L}(1^{-}) \\ v^{L}(1^{+}) \end{pmatrix}, \tag*{(22)}\end{pmatrix}

where

M3=(αL1/4eiπkLρ/20αL−3/4e−i3πkLρ/20).(23)M_{3}=\begin{pmatrix} \alpha_{L}^{1/4}e^{i\pi k_{L}\rho/2} & 0 \\ \alpha_{L}^{-3/4}e^{-i3\pi k_{L}\rho/2} & 0 \end{pmatrix}. \tag*{(23)}

At the coupling region between the left ring and the bus waveguide, the counterclockwise mode satisfies

\begin{pmatrix} v^{L}(1^{+}) \\ C^{L} \end{pmatrix}=\mathcal{T}\begin{pmatrix} v^{L}(1^{-}) \\ A^{L} \end{pmatrix}. \tag*{(24)}\end{pmatrix}

Rearranging this relation yields

\begin{pmatrix} A^{L} \\ C^{L} \end{pmatrix}=M_{4}\begin{pmatrix} v^{L}(1^{-}) \\ v^{L}(1^{+}) \end{pmatrix},\qquad M_{4}=\frac{1}{i\kappa}\begin{pmatrix} -\tau& 1 \\ -1 & \tau\end{pmatrix}. \tag*{(25)}\end{pmatrix}

To account for the ordering of the field amplitudes, we introduce the permutation matrix

J=(0110).(26)J=\begin{pmatrix} 0 & 1 \\ 1 & 0 \end{pmatrix}. \tag*{(26)}

Combining the coupling and propagation relations gives

\begin{pmatrix} D^{R} \\ B^{R} \end{pmatrix}=P\begin{pmatrix} A^{L} \\ C^{L} \end{pmatrix},\qquad P=M_{2}JM_{1}JM_{3}M_{4}^{-1}. \tag*{(27)}\end{pmatrix}

Since JM1J=M4JM_{1}J=M_{4}, this expression simplifies to

P=M2M4M3M4−1.(28)P=M_{2}M_{4}M_{3}M_{4}^{-1}. \tag*{(28)}

Balanced amplification-dissipation and equality of propagation constants

We impose reciprocal round-trip amplitude factors and equal propagation constants,

αLαR=1,kL=kR.(29)\alpha_{L}\alpha_{R}=1,\qquad k_{L}=k_{R}. \tag*{(29)}

Defining α=αR\alpha=\alpha_{R} and φ=2πkRρ\varphi=2\pi k_{R}\rho, we obtain

P=(P11P12P21P22),(30)P=\begin{pmatrix} P_{11} & P_{12} \\ P_{21} & P_{22} \end{pmatrix}, \tag*{(30)}

with

P11=iτκ3α(1+τ2α2−2αcos⁡φ),(31)P_{11}=\frac{i\tau}{\kappa^{3}\sqrt{\alpha}}\left(1+\tau^{2}\alpha^{2}-2\alpha\cos\varphi\right), \tag*{(31)}
P12=iκ3α[αe−iφ+τ2αeiφ−τ2(1+α2)],(32)P_{12}=\frac{i}{\kappa^{3}\sqrt{\alpha}}\left[\alpha e^{-i\varphi}+\tau^{2}\alpha e^{i\varphi}-\tau^{2}(1+\alpha^{2})\right], \tag*{(32)}
P21=iκ3α[τ2(1+α2)−αeiφ−τ2αe−iφ],(33)P_{21}=\frac{i}{\kappa^{3}\sqrt{\alpha}}\left[\tau^{2}(1+\alpha^{2})-\alpha e^{i\varphi}-\tau^{2}\alpha e^{-i\varphi}\right], \tag*{(33)}
P22=−iτκ3α(τ2+α2−2αcos⁡φ),(34)P_{22}=-\frac{i\tau}{\kappa^{3}\sqrt{\alpha}}\left(\tau^{2}+\alpha^{2}-2\alpha\cos\varphi\right), \tag*{(34)}

where τ2+κ2=1\tau^{2}+\kappa^{2}=1 has been used.

Coupling between the clockwise mode in the left ring and the counterclockwise mode in the right ring

At the inter-ring coupling region, the clockwise mode in the left ring couples to the counterclockwise mode in the right ring according to

\begin{pmatrix} v^{R}(2^{+}) \\ u^{L}(2^{+}) \end{pmatrix}=\mathcal{T}\begin{pmatrix} v^{R}(2^{-}) \\ u^{L}(2^{-}) \end{pmatrix}. \tag*{(35)}\end{pmatrix}

Rearranging this relation gives

\begin{pmatrix} v^{R}(2^{+}) \\ v^{R}(2^{-}) \end{pmatrix}=\frac{1}{i\kappa}\begin{pmatrix} \tau& -1 \\ 1 & -\tau\end{pmatrix}\begin{pmatrix} u^{L}(2^{+}) \\ u^{L}(2^{-}) \end{pmatrix}. \tag*{(36)}\end{pmatrix}

Propagation in the left ring gives

uL(1−)=αL1/4eiπkLρ/2uL(2+),(37)u^{L}(1^{-})=\alpha_{L}^{1/4}e^{i\pi k_{L}\rho/2}u^{L}(2^{+}), \tag*{(37)}
uL(2−)=αL3/4ei3πkLρ/2uL(1+).(38)u^{L}(2^{-})=\alpha_{L}^{3/4}e^{i3\pi k_{L}\rho/2}u^{L}(1^{+}). \tag*{(38)}

Combining these propagation and coupling relations yields

\begin{pmatrix} v^{R}(2^{+}) \\ v^{R}(2^{-}) \end{pmatrix}=N_{1}\begin{pmatrix} u^{L}(1^{+}) \\ u^{L}(1^{-}) \end{pmatrix}, \tag*{(39)}\end{pmatrix}

where

N1=1iκ(−αL3/4ei3πkLρ/2ταL−1/4e−iπkLρ/2−ταL3/4ei3πkLρ/2αL−1/4e−iπkLρ/2).(40)N_{1}=\frac{1}{i\kappa}\begin{pmatrix} -\alpha_{L}^{3/4}e^{i3\pi k_{L}\rho/2} & \tau\alpha_{L}^{-1/4}e^{-i\pi k_{L}\rho/2} \\ -\tau\alpha_{L}^{3/4}e^{i3\pi k_{L}\rho/2} & \alpha_{L}^{-1/4}e^{-i\pi k_{L}\rho/2} \end{pmatrix}. \tag*{(40)}

At the coupling region between the left ring and the bus waveguide, the clockwise mode satisfies

\begin{pmatrix} u^{L}(1+) \\ B^{L} \end{pmatrix} = \mathcal{T} \begin{pmatrix} u^{L}(1-) \\ D^{L} \end{pmatrix}. \tag*{(41)}\end{pmatrix}

This relation can be rewritten as

\begin{pmatrix} B^{L} \\ D^{L} \end{pmatrix} = N_{2} \begin{pmatrix} u^{L}(1+) \\ u^{L}(1-) \end{pmatrix}, \qquad N_{2} = \frac{1}{i\kappa} \begin{pmatrix} \tau& -1 \\ 1 & -\tau\end{pmatrix}. \tag*{(42)}\end{pmatrix}

Consequently,

\begin{pmatrix} B^{L} \\ D^{L} \end{pmatrix} = N_{2}N_{1}^{-1} \begin{pmatrix} v^{R}(2+) \\ v^{R}(2-) \end{pmatrix}. \tag*{(43)}\end{pmatrix}

Similarly, at the coupling region between the right ring and the bus waveguide, the counterclockwise mode satisfies

\begin{pmatrix} v^{R}(3+) \\ C^{R} \end{pmatrix} = \mathcal{T} \begin{pmatrix} v^{R}(3-) \\ A^{R} \end{pmatrix}. \tag*{(44)}\end{pmatrix}

Rearranging this relation gives

\begin{pmatrix} C^{R} \\ A^{R} \end{pmatrix} = N_{2} \begin{pmatrix} v^{R}(3+) \\ v^{R}(3-) \end{pmatrix}. \tag*{(45)}\end{pmatrix}

Propagation in the right ring gives

vR(2−)=αR3/4ei3πκRρ/2vR(3+),(46)v^{R}(2-) = \alpha_{R}^{3/4} e^{i3\pi\kappa_{R}\rho/2} v^{R}(3+), \tag*{(46)}
vR(3−)=αR1/4eiπκRρ/2vR(2+).(47)v^{R}(3-) = \alpha_{R}^{1/4} e^{i\pi\kappa_{R}\rho/2} v^{R}(2+). \tag*{(47)}

We therefore obtain

\begin{pmatrix} C^{R} \\ A^{R} \end{pmatrix} = N_{3} \begin{pmatrix} v^{R}(2+) \\ v^{R}(2-) \end{pmatrix}. \tag*{(48)}\end{pmatrix}

where

N3=1iκ(−αR1/4eiπκRρ/2ταR−3/4e−i3πκRρ/2−ταR1/4eiπκRρ/2αR−3/4e−i3πκRρ/2).(49)N_{3} = \frac{1}{i\kappa} \begin{pmatrix} -\alpha_{R}^{1/4}e^{i\pi\kappa_{R}\rho/2} & \tau\alpha_{R}^{-3/4}e^{-i3\pi\kappa_{R}\rho/2} \\ -\tau\alpha_{R}^{1/4}e^{i\pi\kappa_{R}\rho/2} & \alpha_{R}^{-3/4}e^{-i3\pi\kappa_{R}\rho/2} \end{pmatrix}. \tag*{(49)}

Combining this result with Eq. (43) yields

\begin{pmatrix} B^{L} \\ D^{L} \end{pmatrix} = Q \begin{pmatrix} C^{R} \\ A^{R} \end{pmatrix}, \qquad Q = N_{2}N_{1}^{-1}N_{3}^{-1}. \tag*{(50)}\end{pmatrix}

Again, under the conditions

αLαR=1,κL=κR.(51)\alpha_{L}\alpha_{R} = 1, \qquad\kappa_{L} = \kappa_{R}. \tag*{(51)}

The matrix QQ in Eq. (50) then becomes

Q=(Q11Q12Q21Q22).(52)Q = \begin{pmatrix} Q_{11} & Q_{12} \\ Q_{21} & Q_{22} \end{pmatrix}. \tag*{(52)}

with

Q11=−iτκ3α(1+τ2α2−2αcos⁡φ),(53)Q_{11} = -\frac{i\tau}{\kappa^{3}\sqrt{\alpha}}\left(1+\tau^{2}\alpha^{2}-2\alpha\cos\varphi\right), \tag*{(53)}
Q12=iκ3α[τ2(1+α2)−αeiφ−τ2αe−iφ],(54)Q_{12} = \frac{i}{\kappa^{3}\sqrt{\alpha}}\left[\tau^{2}(1+\alpha^{2})-\alpha e^{i\varphi}-\tau^{2}\alpha e^{-i\varphi}\right], \tag*{(54)}
Q21=iκ3α[αe−iφ+τ2αeiφ−τ2(1+α2)],(55)Q_{21} = \frac{i}{\kappa^{3}\sqrt{\alpha}}\left[\alpha e^{-i\varphi}+\tau^{2}\alpha e^{i\varphi}-\tau^{2}(1+\alpha^{2})\right], \tag*{(55)}
Q22=iτκ3α(τ2+α2−2αcos⁡φ).(56)Q_{22} = \frac{i\tau}{\kappa^{3}\sqrt{\alpha}}\left(\tau^{2}+\alpha^{2}-2\alpha\cos\varphi\right). \tag*{(56)}

where τ2+κ2=1\tau^{2}+\kappa^{2}=1 has been used.

Overall transfer matrix under balanced amplification and dissipation

Rearranging Eq. (27), we obtain

AL=−P22P21CL+1P21BR,(57)A^{L}=-\frac{P_{22}}{P_{21}}C^{L}+\frac{1}{P_{21}}B^{R}, \tag*{(57)}
DR=−det⁡PP21CL+P11P21BR.(58)D^{R}=-\frac{\det P}{P_{21}}C^{L}+\frac{P_{11}}{P_{21}}B^{R}. \tag*{(58)}

Similarly, rearranging Eq. (50) gives

CR=1Q21DL−Q22Q21AR,(59)C^{R}=\frac{1}{Q_{21}}D^{L}-\frac{Q_{22}}{Q_{21}}A^{R}, \tag*{(59)}
BL=Q11Q21DL−det⁡QQ21AR.(60)B^{L}=\frac{Q_{11}}{Q_{21}}D^{L}-\frac{\det Q}{Q_{21}}A^{R}. \tag*{(60)}

Propagation through the bus waveguide between the two ring–bus coupling regions introduces a real phase θ\theta, such that

AR=eiθCL,DL=eiθBR.(61)A^{R}=e^{i\theta}C^{L}, \qquad D^{L}=e^{i\theta}B^{R}. \tag*{(61)}

Substituting these relations yields

\begin{pmatrix} C^{R} \\ D^{R} \end{pmatrix} = X\begin{pmatrix} B^{R} \\ A^{R} \end{pmatrix}, \tag*{(62)}\end{pmatrix}
\begin{pmatrix} A^{L} \\ B^{L} \end{pmatrix} = Y\begin{pmatrix} C^{L} \\ B^{R} \end{pmatrix}. \tag*{(63)}\end{pmatrix}

where

X=(Q22Q21eiθeiθQ21−det⁡PP21P11P21),(64)X=\begin{pmatrix} \dfrac{Q_{22}}{Q_{21}}e^{i\theta} & \dfrac{e^{i\theta}}{Q_{21}} \\ -\dfrac{\det P}{P_{21}} & \dfrac{P_{11}}{P_{21}} \end{pmatrix}, \tag*{(64)}
Y=(−P22P211P21−det⁡QQ21eiθQ11Q21eiθ).(65)Y=\begin{pmatrix} -\dfrac{P_{22}}{P_{21}} & \dfrac{1}{P_{21}} \\ -\dfrac{\det Q}{Q_{21}}e^{i\theta} & \dfrac{Q_{11}}{Q_{21}}e^{i\theta} \end{pmatrix}. \tag*{(65)}

Eliminating the intermediate field amplitudes CLC^{L} and BRB^{R}, we obtain the overall transfer relation

\begin{pmatrix} C^{R} \\ D^{R} \end{pmatrix} = M\begin{pmatrix} A^{L} \\ B^{L} \end{pmatrix}, \qquad M=XY^{-1}. \tag*{(66)}\end{pmatrix}

Under the conditions αLαR=1\alpha_{L}\alpha_{R}=1 and κL=κR\kappa_{L}=\kappa_{R}, we again use α=αR\alpha=\alpha_{R} and φ=2πκRρ\varphi=2\pi\kappa_{R}\rho. For compactness, we define

F=1+τ2α2−2αcos⁡φ,(67)F=1+\tau^{2}\alpha^{2}-2\alpha\cos\varphi, \tag*{(67)}
G=τ2+α2−2αcos⁡φ,(68)G=\tau^{2}+\alpha^{2}-2\alpha\cos\varphi, \tag*{(68)}
H±=αe±iφ+τ2αe∓iφ−τ2(1+α2),(69)H_{\pm}=\alpha e^{\pm i\varphi}+\tau^{2}\alpha e^{\mp i\varphi}-\tau^{2}(1+\alpha^{2}), \tag*{(69)}
D=τ2FG−κ6α2.(70)D=\tau^{2}FG-\kappa^{6}\alpha^{2}. \tag*{(70)}

The elements of the overall transfer matrix are then

M11=eiθH+2D,(71)M_{11}=\frac{e^{i\theta}H_{+}^{2}}{\mathcal{D}}, \tag*{(71)}
M12=2iτκ3αGD,(72)M_{12}=\frac{2i\tau\kappa^{3}\sqrt{\alpha}G}{\mathcal{D}}, \tag*{(72)}
M21=−2iτκ3α3/2FD,(73)M_{21}=-\frac{2i\tau\kappa^{3}\alpha^{3/2}F}{\mathcal{D}}, \tag*{(73)}
M22=e−iθH−2D,(74)M_{22}=\frac{e^{-i\theta}H_{-}^{2}}{\mathcal{D}}, \tag*{(74)}

where τ2+κ2=1\tau^{2}+\kappa^{2}=1 has been used. All parameters τ\tau, κ\kappa, α\alpha, kRk_{R}, ρ\rho, and θ\theta are real, with 0<α<10<\alpha<1. Consequently, H−=H+∗H_{-}=H_{+}^{*}, and the transfer matrix satisfies

M22=M11∗,M12∗=−M12,M21∗=−M21.(75)M_{22}=M_{11}^{*},\qquad M_{12}^{*}=-M_{12},\qquad M_{21}^{*}=-M_{21}. \tag*{(75)}

Together with reciprocity, i.e., det⁡M=1\det M=1, these relations imply

M−1=M∗,(76)M^{-1}=M^{*}, \tag*{(76)}

demonstrating the effective PT\mathcal{PT} symmetry in our two mutually coupled ring system.

PT\mathcal{PT} Symmetry Phase, Symmetry Breaking Point, and PT\mathcal{PT} Symmetry Broken Phase

The scattering matrix SS in our analysis is through

\begin{pmatrix} C^{R} \\ B^{L} \end{pmatrix} =S\begin{pmatrix} A^{L} \\ D^{R} \end{pmatrix},\qquad S=\frac{1}{M_{22}}\begin{pmatrix} 1 & M_{12} \\ -M_{21} & 1 \end{pmatrix}. \tag*{(77)}\end{pmatrix}

Since the off-diagonal elements of MM are purely imaginary, we write

M12=iμ,M21=iν,η=μν,(78)M_{12}=i\mu,\qquad M_{21}=i\nu,\qquad\eta=\mu\nu, \tag*{(78)}

where μ\mu and ν\nu are real. Using det⁡M=1\det M=1 and M11=M22∗M_{11}=M_{22}^{*}, we obtain

∣M22∣2=1−η,T=11−η.(79)\lvert M_{22}\rvert^{2}=1-\eta,\qquad T=\frac{1}{1-\eta}. \tag*{(79)}

The scattering eigenvalues are

s±=1±ηM22.(80)s_{\pm}=\frac{1\pm\sqrt{\eta}}{M_{22}}. \tag*{(80)}

For μ≠0\mu\ne0, the corresponding right eigenvectors can be chosen as

ψ±=(iμ±η),Sψ±=s±ψ±.(81)\psi_{\pm}=\begin{pmatrix} i\mu\\ \pm\sqrt{\eta} \end{pmatrix},\qquad S\psi_{\pm}=s_{\pm}\psi_{\pm}. \tag*{(81)}

These eigenvectors specify the relative amplitudes and phases of the two incident fields required to excite each scattering eigen ports:

DRAL=±ηiμ.(82)\frac{D^{R}}{A^{L}}=\frac{\pm\sqrt{\eta}}{i\mu}. \tag*{(82)}

Design Principles for Coupled Ring Resonators

For η<0\eta<0, both eigenvalues are unimodular, ∣s+∣=∣s−∣=1\lvert s_{+}\rvert=\lvert s_{-}\rvert=1, corresponding to the PT\mathcal{PT}-symmetric phase with T<1T<1. For 0<η<10<\eta<1, their magnitudes satisfy ∣s+∣∣s−∣=1\lvert s_{+}\rvert\lvert s_{-}\rvert=1, with ∣s+∣>1\lvert s_{+}\rvert>1 and ∣s−∣<1\lvert s_{-}\rvert<1. This regime corresponds to the PT\mathcal{PT}-symmetric broken phase with T>1T>1, in which the two eigenvalues exhibit amplification and attenuation, respectively.

At η=0\eta=0, the eigenvalues coincide at s+=s−=1/M22s_{+}=s_{-}=1/M_{22}, and T=1T=1. If exactly one of μ\mu and ν\nu vanishes, the eigenvectors also coalesce, yielding a second-order exceptional point. For ν=0\nu=0 and μ≠0\mu\ne0, the coalesced eigenvector is (1,0)T(1,0)^{T}, corresponding to left incidence and reflectionlessness from the left. For μ=0\mu=0 and ν≠0\nu\ne0, it is (0,1)T(0,1)^{T}, corresponding to right incidence and reflectionlessness from the right. However, if μ=ν=0\mu=\nu=0, S=M22−1IS=M_{22}^{-1}I supports two independent eigenvectors and describes bidirectional reflectionlessness rather than an exceptional point.

We first consider a single ring resonator externally coupled to a straight bus waveguide, as shown in Figure 6. Both waveguides have a width of w=0.2 μmw=0.2\,\mu\mathrm{m}, and the ring radius is ρ=6.2 μm\rho=6.2\,\mu\mathrm{m}. The edge-to-edge coupling gap, denoted by dgapd_{\mathrm{gap}}, is varied to obtain the desired through-coupling coefficient τ\tau. The core and cladding refractive indices are initially set to 2.5 and 1.5, respectively, for both waveguides.

Schematic of a single ring externally coupled to a bus waveguide

Figure 6. Schematic of a single ring externally coupled to a bus waveguide.

Using COMSOL Multiphysics, we calculate the complex transmission coefficient σ\sigma under single-sided excitation over the wavelength range 1.555–1.566 μm\mu\mathrm{m}. The spectrum exhibits a whispering-gallery resonance near λ0=1.56 μm\lambda_{0}=1.56\,\mu\mathrm{m}, accompanied by a pronounced transmission minimum. We then introduce material gain into the ring core by setting

nring=2.5−0.0051i,(83)n_{\mathrm{ring}}=2.5-0.0051i, \tag*{(83)}

while retaining the remaining material and geometric parameters. The resulting transmission spectrum exhibits a resonant peak near the same wavelength.

To extract the effective model parameters, we fit the simulated complex transmission coefficient using the single-ring expression σ=τ−αeiφ1−ταeiφ\sigma= \frac{\tau-\alpha e^{i\varphi}}{1-\tau\alpha e^{i\varphi}}, φ=k0nringeff2πρ\varphi= k_0 n_{\mathrm{ring}}^{\mathrm{eff}} 2\pi\rho. Here, α\alpha is the net round-trip field-amplitude factor, including material gain or loss and radiative attenuation, whereas nringeffn_{\mathrm{ring}}^{\mathrm{eff}} is the real effective index governing the propagation phase. The fitted parameters are treated as constant over the wavelength interval considered.

The fit gives τ=0.86142\tau= 0.86142 and nringeff=1.76206n_{\mathrm{ring}}^{\mathrm{eff}} = 1.76206. The COMSOL can give nbuseff=1.92149n_{\mathrm{bus}}^{\mathrm{eff}} = 1.92149. Figure 7 compares the simulated transmission coefficient with the fitted model, showing its magnitude, imaginary part, and real part. The model reproduces the principal features of the complex transmission spectrum.

Comparison of analytical model and COMSOL Multiphysics simulations for the complex transmission coefficient

Figure 7. Comparison of the analytical model (solid curves) and COMSOL Multiphysics simulations (red dots) for the complex transmission coefficient σ\sigma of a single ring resonator coupled to a bus waveguide: (a) transmittance ∣σ∣2|\sigma|^2, (b) imaginary part Im⁡[σ]\operatorname{Im}[\sigma], and (c) real part Re⁡[σ]\operatorname{Re}[\sigma].

We repeat this procedure for different coupling gaps and imaginary parts of the ring-core refractive index. The coupling gap primarily controls τ\tau and κ\kappa, whereas the imaginary part of the material index primarily controls the round-trip field amplitude factor α\alpha. Within the coupling regime considered here, decreasing the gap reduces τ\tau. Increasing material loss decreases α\alpha, while increasing material gain increases it.

For the CPAL demonstrated in Figure 5 (a), (Figure 5c), and (Figure 5d), we list the corresponding material and geometry parameters:

Lossy ringGain ring
dgap=550 nmd_{\mathrm{gap}} = 550\,\mathrm{nm}dgap=550 nmd_{\mathrm{gap}} = 550\,\mathrm{nm}
ncorering=2.5+0.00511886in_{\mathrm{core}}^{\mathrm{ring}} = 2.5 + 0.00511886incorering=2.5−0.00613281in_{\mathrm{core}}^{\mathrm{ring}} = 2.5 - 0.00613281i
ncorebus=2.5n_{\mathrm{core}}^{\mathrm{bus}} = 2.5ncorebus=2.5n_{\mathrm{core}}^{\mathrm{bus}} = 2.5
ncladding=1.5n_{\mathrm{cladding}} = 1.5ncladding=1.5n_{\mathrm{cladding}} = 1.5
w=0.2μmw = 0.2\mu\mathrm{m}w=0.2μmw = 0.2\mu\mathrm{m}
ρ=6.2μm\rho= 6.2\mu\mathrm{m}ρ=6.2μm\rho= 6.2\mu\mathrm{m}

Table 1.

For T=0T = 0 demonstrated in Figure 5 (b) and (Figure 5d), we list the corresponding material parameters:

Loss ringGain ring
dgap=580 nmd_{\mathrm{gap}} = 580\,\mathrm{nm}dgap=580 nmd_{\mathrm{gap}} = 580\,\mathrm{nm}
nring=2.5+0.0029in^{\mathrm{ring}} = 2.5 + 0.0029inring=2.5−0.0038in^{\mathrm{ring}} = 2.5 - 0.0038i
ncore=2.5n_{\mathrm{core}} = 2.5ncore=2.5n_{\mathrm{core}} = 2.5
ncladding=1.5n_{\mathrm{cladding}} = 1.5ncladding=1.5n_{\mathrm{cladding}} = 1.5
w=0.2μmw = 0.2\mu\mathrm{m}w=0.2μmw = 0.2\mu\mathrm{m}
ρ=6.2μm\rho= 6.2\mu\mathrm{m}ρ=6.2μm\rho= 6.2\mu\mathrm{m}

Table 2.

References

  1. [1]M. T. Hill, H. J. S. Dorren, T. de Vries, X. J. M. Leijtens, J. H. Besten, B. Smalbrugge, Y.-S. Oei, H. Binsma, G.-D. Khoe, and M. K. Smit, A fast low-power optical memory based on coupled micro-ring lasers, Nature 432, 206 (2004).pubmed.ncbi.nlm.nih.gov/15538365
  2. [2]J. Wiersig, Structure of whispering-gallery modes in optical microdisks perturbed by nanoparticles, Phys. Rev. A 84, 063828 (2011).DOI
  3. [3]W. Chen, Ş. K. Özdemir, G. Zhao, J. Wiersig, and L. Yang, Exceptional points enhance sensing in an optical microcavity, Nature 548, 192 (2017).DOI
  4. [4]R. E. Scott, P. M. Alsing, A. M. Smith, M. L. Fanto, C. C. Tison, J. Schneeloch, and E. E. Hach III, Scalable controlled-NOT gate for linear optical quantum computing using microring resonators, Phys. Rev. A 100, 022322 (2019).DOI
  5. [5]A. Dutt, K. Luke, S. Manipatruni, A. L. Gaeta, P. Nusssenzweig, and M. Lipson, On-chip optical squeezing, Phys. Rev. Applied 3, 044005 (2015).DOI
  6. [6]V. R. Almeida, C. A. Barrios, R. R. Panepucci, and M. Lipson, All-optical control of light on a silicon chip, Nature 431, 1081 (2004).pubmed.ncbi.nlm.nih.gov/15510144
  7. [7]M. Cai, O. Painter, and K. J. Vahala, Observation of critical coupling in a fiber taper to a silica-microsphere whispering-gallery mode system, Phys. Rev. Lett. 85, 74 (2000).pubmed.ncbi.nlm.nih.gov/10991162
  8. [8]Y. D. Chong, L. Ge, H. Cao, and A. D. Stone, Coherent perfect absorbers: Time-reversed lasers, Phys. Rev. Lett. 105, 053901 (2010).
  9. [9]D. G. Baranov, A. Krasnok, T. Shegai, A. Alù, and Y. Chong, Coherent perfect absorbers: Linear control of light with light, Nat. Rev. Mater. 2, 17064 (2017).
  10. [10]W. Wan, Y. Chong, L. Ge, H. Noh, A. D. Stone, and H. Cao, Time-reversed lasing and interferometric control of absorption, Science 331, 889 (2011).DOI
  11. [11]Y. Wan, J. Norman, Q. Li, M. J. Kennedy, D. Liang, C. Zhang, D. Huang, Z. Zhang, A. Y. Liu, A. Torres, D. Jung, A. C. Gossard, E. L. Hu, K. M. Lau, and J. E. Bowers, 1.3 μm submillilamp threshold quantum dot micro-lasers on Si, Optica 4, 940 (2017).
  12. [12]D. Liang, M. Fiorentino, T. Okumura, H.-H. Chang, D. T. Spencer, Y.-H. Kuo, A. W. Fang, D. Dai, R. G. Beausoleil, and J. E. Bowers, Electrically-pumped compact hybrid silicon microring lasers for optical interconnects, Opt. Express 17, 20355 (2009).DOI
  13. [13]Q. Luo, C. Yang, R. Zhang, Z. Hao, D. Zheng, H. Liu, X. Yu, F. Gao, F. Bo, Y. Kong, G. Zhang, and J. Xu, On-chip erbium-doped lithium niobate microring lasers, Opt. Lett. 46, 3275 (2021).
  14. [14]H. Rong, S. Xu, Y.-H. Kuo, V. Sih, O. Cohen, O. Raday, and M. Paniccia, Low-threshold continuous-wave Raman silicon laser, Nat. Photonics 1, 232 (2007).DOI
  15. [15]J. S. Levy, A. Gondarenko, M. A. Foster, A. C. Turner-Foster, A. L. Gaeta, and M. Lipson, CMOS-compatible multiple-wavelength oscillator for on-chip optical interconnects, Nat. Photonics 4, 37 (2010).DOI
  16. [16]A. Mostafazadeh and S. Rostamzadeh, Perturbative analysis of spectral singularities and their optical realizations, Phys. Rev. A 86, 022103 (2012).DOI
  17. [17]A. Mostafazadeh, Self-dual spectral singularities and coherent perfect absorbers without PT-symmetry, J. Phys. A: Math. Theor. 45, 444024 (2012).DOI
  18. [18]A. Guo, G. J. Salamo, D. Duchesne, R. Morandotti, M. Volatier-Ravat, V. Aimez, G. A. Siviloglou, and D. N. Christodoulides, Observation of PT-symmetry breaking in complex optical potentials, Phys. Rev. Lett. 103, 093902 (2009).pubmed.ncbi.nlm.nih.gov/19792798
  19. [19]G. C. Makris, R. El-Ganainy, D. N. Christodoulides, and Z. H. Musslimani, Beam dynamics in PT symmetric optical lattices, Phys. Rev. Lett. 100, 103904 (2008).pubmed.ncbi.nlm.nih.gov/18352189
  20. [20]S. Longhi and L. Feng, PT-symmetric microring laser-absorber, Opt. Lett. 39, 5026 (2014).DOI
  21. [21]J. Choi and H. Noh, Reverse circulation mode based on optical antiresonance in single microring resonators with parity-time structure, Phys. Rev. B 111, 075424 (2025).DOI
  22. [22]V. V. Konotop, B. C. Sanders, and D. A. Zezyulin, “Spectral singularities of a potential created by two coupled microring resonators,” Opt. Lett. 44, 2024 (2019).DOI
  23. [23]H. Hodaei, M. A. Miri, A. U. Hassan, W. E. Hayenga, M. Heinrich, D. N. Christodoulides, and M. Khajavikhan, Parity-time-symmetric coupled microring lasers operating around an exceptional point, Opt. Lett. 40, 4955 (2015).DOI
  24. [24]Hodaei, Hossein, et al., ”Parity-time–symmetric microring lasers.” Science 346.6212 (2014): 975-978.DOI
  25. [25]B. Peng, S. K. Özdemir, F. Lei, F. Monifi, M. Gianfreda, G. L. Long, S. Fan, F. Nori, C. M. Bender, and L. Yang, Parity-time-symmetric whispering-gallery microcavities, Nat. Phys. 10, 394 (2014).DOI
  26. [26]L. Ge, Y. D. Chong, and A. D. Stone, Conservation relations and anisotropic transmission resonances in one-dimensional PT-symmetric photonic heterostructures, Phys. Rev. A 85, 023802 (2012).DOI
  27. [27]J. Y. Lee and P.-Y. Chen, Generalized parametric space, parity symmetry of reflection, and systematic design approach for parity-time-symmetric photonic systems, Phys. Rev. A 104, 033510 (2021).DOI
  28. [28]W. D. Heiss, The physics of exceptional points, J. Phys. A: Math. Theor. 45, 444016 (2012).
  29. [29]Y. D. Chong, L. Ge, and A. D. Stone, PT-symmetry breaking and laser-absorber modes in optical scattering systems, Phys. Rev. Lett. 106, 093902 (2011).pubmed.ncbi.nlm.nih.gov/21405622
  30. [30]M.-A. Miri and A. Alù, Exceptional points in optics and photonics, Science 363, ea ar7709 (2019).DOI
  31. [31]H. Hodaei, A. U. Hassan, S. Wittek, H. Garcia-Gracia, R. El-Ganainy, D. N. Christodoulides, and M. Khajavikhan, Enhanced sensitivity at higher-order exceptional points, Nature 548, 187 (2017).DOI
  32. [32]W. Bogaerts, P. De Heyn, T. Van Vaerenbergh, K. De Vos, S. K. Selvaraja, T. Claes, P. Dumon, P. Bienstman, D. Van Thourhout, and R. Baets, Silicon microring resonators, Laser Photonics Rev. 6, 47 (2012).

Paper details

vlnc:W_7k83rpmx
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents