betaFeedback

WorksPhysics and Astronomy

Free energy profile computations for force-induced melting of a short B-DNA using Jarzynski equality

Abstract

We initially equilibrate a system of solvated 12-base pair canonical B-DNA of a specified sequence in a state of no external force acting on it (state A:f=0A: f=0). A switching experiment is then performed by pulling one end of the DNA while restraining its other end. The pulling force is taken up to a maximum of 400 pN (state BB), at a specified constant rate. The non-equilibrium work done W associated with this finite-time process is determined by integrating the extension of the DNA molecule with respect to the applied force. The distribution of the work values P(W)P(W) is obtained by repeating the pulling process several times, wherein each time, the process is started with macroscopic state AA. The free energy profile Φ(f)Φ(f) is obtained by a suitably devised method from the Jarzynski equality. The conformational space of the DNA is also sampled in an equilibrium method of umbrella sampling by considering the end-to-end length ξξ as the reaction coordinate. The associated potential of mean force (PMF) Φ(ξ)Φ(ξ) is then computed by invoking the weighted histogram analysis method (WHAM). From the results, we observe that the equilibrium free energy difference between two states, AA and BB, ΔFAB (=FB−FA)ΔF_{AB} ~(=F_B -F_A) obtained through both methods, is in close agreement with each other, despite the differences along the profiles Φ(f)Φ(f) and Φ(ξ)Φ(ξ), attributed to their distinct pathways of unzipping.

Introduction

Fundamental processes that occur at the level of nucleosomes are connected to the denaturation and replication of the double-stranded DNA (dsDNA) by proteins like helicase, histone chaperones, or transient thermal fluctuations. The associated free energy profiles along the pathways of denaturation at various physiological conditions of the dsDNA are of utmost importance to the pharmaceutical and drug manufacturing sectors. A dsDNA can either be heated or be subjected to an external mechanical force for the denaturation to occur, the former method is known as the thermal melting [1, 2, 3], whereas the latter is termed as the force-induced melting [4, 5, 6] of the DNA. In vitro, such a process is successfully performed through force spectroscopy by AFM cantilever [7, 8, 9] or by the applications of optical tweezers [10, 11, 12]. In silico, the model systems [13, 14, 15, 16, 17], and atomistic simulations have been playing a vital role in free energy calculations pertaining to the biomolecular systems like DNA, and RNA [11, 18, 19, 20, 21, 22], and their interactions with various proteins [23, 24, 25, 26].

Equilibrium simulation methods like umbrella sampling [27, 28], and thermodynamic integration [29] have been the conventional approaches for free energy and PMF profile calculations for biological systems ranging from ion channels in membranes [30, 31], protein-ligand interactions [32, 33], and water permeation through Carbon nanotube [34, 35] are a few to name. These methods were considered a benchmark in their regime. However, in the early twenty first century, it has seen an increasing number of investigations over the nonequilibrium fluctuation theorems, particularly the Jarzynski equality [36, 37], Crooks’ fluctuation theorem [38], and their applicability to biological systems for their free energy computations [19, 39, 40]. Soon these nonequilibrium methods have become increasingly popular and are validated for various physical [41, 42, 43], chemical and simple biological systems [39, 43, 44, 45, 46, 47]. However, their applicability for complex biomolecular systems had been a debated topic in the literature.

Warshel et. al. [48] conducted the simulations of proteins and observed the difference in the electrostatic potential values obtained from nonequilibrium techniques like JE, and the free energy perturbation techniques like US. In another study, Kuyucak et. al. [49] performed the PMF calculations of a ligand binding to an ion channel, obtained from both JE and US; wherein, they reported a slow convergence in the PMF obtained from JE. However, Shulten et. al. [19, 50] conducted the steered molecular dynamics simulations over a deca-alanine system. From their PMF calculations from JE, and US, almost equal efficiency is reported between both the methods, and an improving accuracy with the sampling size in JE. Also, other work by Ritort et. al. [39, 46] report the viable application of the nonequilibrium fluctuation theorems to the biomolecular systems like DNA hairpin.

Therefore, keeping in view of the significance of the free energy calculations corresponding to the DNA, here we compare the respective PMF calculations from both the equilibrium and nonequilibrium methods. Pertaining to the calculations for a dsDNA, Maiti et. al. [51, 52] have reported the nonequilibrium pulling process carried out with various possible pulling protocols. However, a conventional umbrella sampling had been employed for free energy calculations whenever required, to determine the corresponding PMF profile. Here, in this work, we perform nonequilibrium switching experiments over an initially equilibrated dsDNA and employ the Jarzynski equality to evaluate the free energy profile along the path of the control variable, namely the pulling force. We also perform the equilibrium umbrella sampling over the same system of an equilibrated dsDNA and then determine the PMF profile. The profile from JE is then validated with the one obtained from US, after suitable normalization of their range of values. From the results we notice that the value of the free energy difference ΔF\Delta F between the initial equilibrated state (AA) and the final denaturized state (BB) agrees well between both the methods. However, a difference of more than 10kBT10k_B T is observed in the midrange values of the reaction coordinate, which can be attributed to the difference in the ensemble variables, in both the cases. More details on the theory and the methods of implementation are discussed in the following sections.

Theory and Methods

The initial structure of a 12-base-pair double-stranded DNA with the sequence CGCGAATTCGCG is prepared using the LEaP module of AMBER-10 [53] with parmbsc0 force field parameters describing the interactions associated with the DNA. The Na⁺ counterions with Joung-Cheatham ion parameters [53] are added to neutralize the negative charge on the DNA. The resulting structure is then solvated with TIP3P [54] water molecules in a large enough box, ensuring a solvation shell of about 10 Å even in the fully stretched configuration of the DNA. The system is then well equilibrated at a temperature of 300 K, as per the standard equilibration protocol [51, 52]. The equilibrated dsDNA is then subjected to a pulling force on the O3′ and O5′ atoms of one of its ends, where the other end is fixed by a strong positional restraint.

Jarzynski Equality

Consider a system in thermal equilibrium with a heat reservoir at a temperature TT. Let λ\lambda be any externally controllable macroscopic parameter tuning for which the state of the system can be changed. If the system is driven isothermally from an initial equilibrium state AA (consistent with λ=λi\lambda= \lambda_i) to state BB (consistent with λ=λf\lambda= \lambda_f) via a predefined protocol λ(t) ⁣:λi→λf\lambda(t)\colon\lambda_i \to\lambda_f; then, the work done during such a switching process is

W=∫0τ∂H∂λ∂λ∂t dt(1)W = \int_{0}^{\tau} \frac{\partial H}{\partial\lambda} \frac{\partial\lambda}{\partial t}\,dt \tag*{(1)}

Here, HH defines how the energy of the system depends on the parameter λ\lambda, and τ\tau refers to the switching time, indicating how slow or fast the switching process is carried out. One obtains an ensemble of work values {Wi}\{W_i\} by performing several such switching experiments following the same protocol λ(t)\lambda(t). Jarzynski equality [36, 37] relates the non-equilibrium work done and the equilibrium free energy difference ΔF(=FB−FA)\Delta F(= F_B - F_A) between the two states AA and BB.

⟨e−βW⟩=e−βΔF,(2)\left\langle e^{-\beta W}\right\rangle= e^{-\beta\Delta F}, \tag*{(2)}

where ⟨⋅⟩\langle\cdot\rangle denotes averaging over the work ensemble, and β=(kBT)−1\beta= (k_B T)^{-1}. In this work, we consider the pulling force f(t)f(t) as the control parameter.

Umbrella sampling

In this method, one usually defines a generic variable named the reaction coordinate ξ\xi which can be a single parameter or a combination of two or more; the latter is termed as a ‘collective variable.’ For a process like stretching a double-stranded DNA, the end-to-end distance (EED) is chosen as the suitable reaction coordinate. In order to sample the configuration space of the DNA at any given EED ξ0\xi_0 adequately well, a harmonic biasing potential Ub(ξ(r))=k(ξ(r)−ξ0)2U_b(\xi(r)) = k(\xi(r) - \xi_0)^2 is applied to the system [27, 28], where ξ\xi and kk denote the instantaneous value of EED and the steepness of the potential respectively.

Let Eu=E(r)E_u = E(r) and Eb=E(r)+Ub(ξ(r))E_b = E(r) + U_b(\xi(r)) representing the unbiased and biased energies of the system respectively. The equilibrium probability distribution of EED for the unbiased and biased cases separately can be written as

Pu(ξ)=∫e−βEuδ(ξ(r)−ξ)dNr∫e−βEudNr,(3)P_u(\xi) = \frac{\int e^{-\beta E_u}\delta(\xi(\mathbf{r})-\xi)d^N r}{\int e^{-\beta E_u}d^N r}, \tag*{(3)}

and

Pb(ξ)=∫e−β[Eu+Ub(ξ(r))]δ(ξ(r)−ξ)dNr∫e−β[Eu+Ub(ξ(r))]dNr,(4)P_b(\xi) = \frac{\int e^{-\beta[E_u+U_b(\xi(\mathbf{r}))]}\delta(\xi(\mathbf{r})-\xi)d^N r}{\int e^{-\beta[E_u+U_b(\xi(\mathbf{r}))]}d^N r}, \tag*{(4)}

respectively, with NN representing the number of degrees of freedom for the system. By integrating the above with reference to the Dirac-delta function, one can obtain

Pb(ξ)=Pu(ξ)e−βUb(ξ)∫e−βE(r)dNr∫e−β[E(r)+Ub(ξ(r))]dNr(5)P_b(\xi)=P_u(\xi)e^{-\beta U_b(\xi)}\frac{\int e^{-\beta E(\mathbf{r})}d^N r}{\int e^{-\beta[E(\mathbf{r})+U_b(\xi(\mathbf{r}))]}d^N r} \tag*{(5)}

which can be rewritten as

Pu(ξ)=Pb(ξ)eβUb(ξ)⟨e−βUb(ξ(r))⟩.(6)P_u(\xi)=P_b(\xi)e^{\beta U_b(\xi)}\left\langle e^{-\beta U_b(\xi(\mathbf{r}))}\right\rangle. \tag*{(6)}

The unbiased free energy associated with ξ(r)=ξ\xi(\mathbf{r})=\xi can be obtained from Pu(ξ)P_u(\xi) as,

Au(ξ)=−kBTln⁡(Pu(ξ)),=−kBTln⁡(Pb(ξ)−Ub(ξ))+F,(7)\begin{aligned} A_u(\xi)=-k_BT\ln(P_u(\xi)), \\ &=-k_BT\ln(P_b(\xi)-U_b(\xi))+F, \tag*{(7)} \end{aligned}

where F=−kBTln⁡⟨e−βUb(ξ(r))⟩F=-k_BT\ln\left\langle e^{-\beta U_b(\xi(\mathbf{r}))}\right\rangle. The reaction coordinate ξ\xi is sampled at close enough regular discrete points so that Pb(ξ)P_b(\xi) for neighboring values of ξ\xi has significant overlap. But to obtain the potential of mean force (PMF) along the path of ξ\xi, we need to stitch the values of Au(ξ)A_u(\xi) that were obtained at each discrete point of ξ\xi, which requires an accurate evaluation of FF at each window. Though a few methods [55, 56] were proposed for this purpose, the most promising one is the weighted histogram analysis method (WHAM) [57].

Results and Discussion

An initial configuration of the ds-DNA after equilibration which corresponds to state A: f=f0=0f=f_0=0 pN is depicted in Figure 1(a). Now, a pulling force is applied on the O3′ and O5′ end atoms of the ds-DNA while applying a strong positional restraint (of force constant ∼\sim5000 N/m) on the O5′ and O3′ atoms of the other end of the DNA. This pulling force is applied at a constant rate of 10−410^{-4} pN/fs, until it reaches a maximum value of fmax=400f_{max}=400 pN. Therefore, at any instant of time tt, the applied force is given by

Initial equilibrated and denaturized DNA configurations under applied force

Figure 1. (a) An initial equilibrated configuration of the DNA at no pulling force. (b). a configuration of the DNA at an applied pulling force of 400 pN, over the O3’ – O5’ atoms of the same end.

f(t)=f0+(fmax−f0)tτ,=f0+t(δfτ).(8)\begin{aligned} f(t)=f_0+(f_{max}-f_0)\frac{t}{\tau}, \\ &=f_0+t(\delta f_\tau). \tag*{(8)} \end{aligned}

In the above, τ\tau refers to the switching time, and δfτ=(fmax⁡−f0)/τ=10−4\delta f_{\tau} = (f_{\max} - f_{0})/\tau= 10^{-4} pN/fs which is the switching rate. Note that here the rate of applied force exceeds the typical experimental value by almost two orders of magnitude. This is because invoking the experimental pulling speeds in a simulation requires huge simulation times that are practically impossible. Figure 1(b) represents a denaturized configuration at f=fmax⁡f = f_{\max}.

fig_DNA_config

The resulting molecular extension of the dsDNA as a function of the pulling force is shown in Figure 2(a). There exist three H-bonds between a C-G base pair and two H-bonds between a base pair A-T, respectively [58]. A H-bond is considered broken if the respective atoms are separated by more than 3.2 A˚3.2\,\text{\AA} of distance, and the angle is below 130°. Following this criterion, the number of Watson-Crick H-bonds that are intact during the pulling process is calculated from the trajectory and is shown in Figure 2(b).

Force-extension curve and intact Watson-Crick hydrogen bonds during DNA pulling

Figure 2. (a). Force-extension curve of the ds-DNA during a numerical pulling experiment (b). the number of Watson-Crick H-bonds that are intact during the process.

fig_Force_Extn_and_H_bonds

fig_Work_ensemble

From the figure, we notice that most of the H-bonds were intact until about 150 pN of pulling force, beyond which, the dsDNA was tending to transit from a helical configuration to a stretched, ladder-like configuration as shown in Figure 1(b), with majority of its H-bonds broken. Since this pulling is performed as a finite time process, it results in a final state which may not be in equilibrium, but consistent with the condition that f=fmaxf=f_{max}. Therefore, the nonequilibrium work done associated with this process A(f=0)→B(f=fmax)A(f=0) \to B(f=f_{max}) can be evaluated by numerically integrating the force-extension curve,

W=∫f0fmaxx(f) df=∫0400pNx(f) df.(9)W=\int_{f_0}^{f_{max}}x(f)\,\mathrm{d}f=\int_{0}^{400\mathrm{pN}}x(f)\,\mathrm{d}f. \tag*{(9)}

This corresponds to a single switching process. Several of such identical pulling experiments were performed to obtain an ensemble of work values, P(W)P(W), as depicted in Figure 3.

Non-equilibrium work values and normalized distribution of work done

Figure 3. (a). The non-equilibrium work values {Wi}\{W_i\} obtained through various pulling experiments (b). normalized distribution of work done, P(W)P(W). The red dotted line denotes the free energy difference ΔF\Delta F calculated using the Jarzynski equality.

The free energy difference ΔF\Delta F between the initial and final equilibrium states of A and B can be obtained following the Jarzynski equality, as in eq. (2). The left tail of P(W)P(W), where W<ΔFW<\Delta F, represents the switching experiments that seemingly violate the second law of thermodynamics [41]. However, the mean work value ⟨W⟩>ΔF\langle W\rangle>\Delta F, being consistent with the second law. It is straight forward to calculate the free energy difference ΔF\Delta F between the two equilibrium states, using the Jarzynski equality. In this work, we obtain the free energy profile Φ(f)\Phi(f) along the path of the control variable ff: 0→4000\to400 pN. This full range of ff is divided into 100 uniformly spaced intervals, each of width 4 pN. Each intermediary point in these set of values would serve as an apparent final state for the switching process. That means, for any i-th intermediary point BiB_i between the states A to B,

Bi:f0+i δf, for i∈[0,n],(10)B_i:f_0+i\,\delta f,\ \text{for }i\in[0,n], \tag*{(10)}

where f0+nδf=fmaxf_0+n\delta f=f_{max}, and ΔFABi=FBi−FA\Delta F_{AB_i}=F_{B_i}-F_A.

fig_separate_DF_profiles_JE_and_US

In the above, ΔFABi\Delta F_{AB_i} denote the free energy value at BiB_i relative to its value at state AA; which can be obtained from the Jarzynski equality,

⟨e−βWABi⟩A→Bi=e−βΔFABi,\left\langle e^{-\beta W_{AB_i}}\right\rangle_{A\to B_i}=e^{-\beta\Delta F_{AB_i}},
ΔFABi=FBi−FA=−1βln⁡(⟨e−βWABi⟩A→Bi).(11)\Delta F_{AB_i}=F_{B_i}-F_A=-\frac{1}{\beta}\ln\left(\left\langle e^{-\beta W_{AB_i}}\right\rangle_{A\to B_i}\right). \tag*{(11)}

In the above, the ensemble averaging is done only up to the intermediary point BiB_i, and WABiW_{AB_i} represent the nonequilibrium work done from AA to the point BiB_i.

The so obtained profile Φ(f)\Phi(f) from this method is depicted in Figure 4(a). Point to note here is that Φ(f)\Phi(f) at each BiB_i represent only the free energy of FBiF_{B_i} relative to FAF_A, but not the absolute free energy.

Free energy and potential of the mean force profiles

Figure 4. (a). The free energy profile Φ(f)\Phi(f) obtained from the presented method from the Jarzynski equality. (b). The potential of the mean force (PMF) profile Φ(ξ)\Phi(\xi) as obtained from the umbrella sampling method, where ξ\xi is the end-to-end length of the dsDNA.

We also performed the equilibrium simulation method that samples the configuration space of the dsDNA at several end-to-end lengths spanning from 3636Å to 7676Å. This is achieved by applying a harmonic potential restraint k(ξ−ξ0)2k(\xi-\xi_0)^2 of force constant k=4k=4 kcal/mol-Å2^2, at an initial end-to-end length value of ξ0=36\xi_0=36Å, which is then varied at a window of 11Å. The system is sufficiently equilibrated at each window, resulting in the Gaussian-like forms for P(ξ)P(\xi), with sufficient overlap between the distribution tails for the neighboring windows. This combination of the force constant and the sampling window values were chosen due to their good convergence in the PMF calculations as shown in the previous studies [51, 52]. The umbrella sampling method combined with the WHAM resulted in the PMF profile Φ(ξ)\Phi(\xi), as shown in Figure 4(b). Here, the end-to-end length ξ\xi is chosen as the reaction coordinate. Therefore, the sequence of microstates during the denaturation of the dsDNA in this protocol can significantly differ from that of the sequence from the nonequilibrium pulling process, as the pulling force is the control variable in the latter case. However, both profiles are expected to merge in the case of reversible pulling, i.e., for large switching time limit. Despite the differences along the profile, the value of ΔFAB=FB−FA=91.2\Delta F_{AB}=F_B-F_A=91.2 kcal agrees well between both the methods.

Since the range of the pulling force ff, and the end-to-end distance ξ\xi are completely different, both are normalized to get values from 0 to 1, and the combined plot is shown in Figure 5. It is evident from Figure 5 that both methods yield almost overlapping profiles, except in the mid-range values of the normalized ξ\xi and ff, which can be attributed to differences in their pathways of unzipping.

Combined profiles of free energy obtained through the Jarzynski equality and umbrella sampling

Figure 5. Profiles of free energy obtained through the Jarzynski equality, Φ(f)\Phi(f), and through the method of umbrella sampling, Φ(ξ)\Phi(\xi).

Conclusion

The free energy profile for the force-induced melting of a 12-base pair short B-DNA with the sequence CGCGAATTCGCG is obtained using the nonequilibrium work fluctuation theorem, specifically the Jarzynski equality. Being a finite time process, the final state of this pulling need not be an equilibrium state. Therefore, considering any intermediary point BiB_i between the initial (AA) and final (BB) states as an apparent final state, the JE can be applied to extract the free energy difference ΔFABi\Delta F_{AB_i} from the set of phase space trajectories from AA to BB. Following this procedure, the profile Φ(f)\Phi(f) from f0f_0 to fmax⁡f_{\max} is obtained. The same is compared with the PMF profile Φ(ξ)\Phi(\xi) obtained with the equilibrium simulation method like umbrella sampling. Here, the conformation space of an identical dsDNA is sampled at various end-to-end lengths (ξ\xi) from 36Å - 76Å, by applying a suitable biasing harmonic potential restraint.

The JE method uses pulling force as the macroscopic control variable to drive the state of the dsDNA, whereas the equilibrium US method uses a collective variable, namely the end-to-end length as the reaction coordinate. Therefore, they both correspond to a different ensemble altogether. However, the profile from JE is expected to tend towards the one obtained from US, in the large switching time limit. That makes the switching process very slow, and practically impossible to perform in any reasonable time. Though the JE is accurate enough even in the small switching time regimes, but it needs many sampling paths from AA to BB so that the rare events are also properly accommodated in the trajectory, which plays a crucial role in determining the accuracy of the ΔF\Delta F value. Hence, it is a trade-off between the speed and accuracy. One must

Cite_id2305_High_throu_2025_Ke

judiciously decide the switching rate depending on the system size. For the rate of switching (δfτ=10−4\delta f_\tau= 10^{-4} pN/fs) used here, single switching experiment from f0f_0 to fmax⁡f_{\max} is roughly about 4 ns simulation time, i.e., for NN such identical pulling processes, the total simulation time scales as ∼4N\sim4N ns. Whereas, for US, the simulation time associated with each 1A˚1\text{\AA} window is typically about 3 to 4 ns, which makes the total simulation time associated with the US, to sample from 36A˚36\text{\AA} to 76A˚76\text{\AA} is about 120 – 160 ns. Therefore, for this system of 12-base pair dsDNA, one can employ the JE with reasonable switching rates, if the primary concern is only the free energy difference. Whereas one can adopt the US method to yield the full PMF profile. JE would be beneficial for the small system sizes. Increasing the size of the system increases the computational complexity for JE as it requires more phase space trajectories to sample from AA to BB for better accuracy. However, these simulations can be run in parallel thereby significantly reducing the overall computation time, unlike the serial runs as required by the US.

Acknowledgments

SSNC thanks the computational facility provided by the Department of Physics, Indian Institute of Science. The computational facility at the Solid State and Structural Chemistry Unit (SSCU), Indian Institute of Science, Bengaluru is highly acknowledged.

References

  1. [1]Y. Ke, E. Sharma, H. K. Wayment-Steele, W. R. Becker, A. Ho, E. Marklund, and W. J. Greenleaf, High-throughput DNA melt measurements enable improved models of DNA folding thermodynamics, Nat Commun 16, 5572 (2025).DOI
  2. [2]M. Peyrard and A. R. Bishop, Statistical mechanics of a nonlinear model for DNA denaturation, Phys Rev Lett 62, 2755 (1989).pubmed.ncbi.nlm.nih.gov/10040080
  3. [3]D. Poland and H. A. Scheraga, Occurrence of a phase transition in nucleic acid models, J Chem Phys 45, 1464 (1966).pubmed.ncbi.nlm.nih.gov/5920201
  4. [4]S. B. Smith, Y. Cui, and C. Bustamante, Overstretching B-DNA: The Elastic Response of Individual Double-Stranded and Single-Stranded DNA Molecules, Science 271, 795 (1996).pubmed.ncbi.nlm.nih.gov/8628994
  5. [5]S. Cocco, R. Monasson, and J. F. Marko, Force and kinetic barriers to unzipping of the DNA double helix, Proceedings of the National Academy of Sciences 98, 8608 (2001).pubmed.ncbi.nlm.nih.gov/11447279
  6. [6]M. C. Williams, J. R. Wenner, I. Rouzina, and V. A. Bloomfield, Effect of pH on the Overstretching Transition of Double-Stranded DNA: Evidence of Force-Induced DNA Melting, Biophysical Journal 80, 874 (2001).pubmed.ncbi.nlm.nih.gov/11159454
  7. [7]T. Strunz, K. Oroszlan, R. Schäfer, and H.-J. Güntherodt, Dynamic force spectroscopy of single DNA molecules, Proc. Natl. Acad. Sci. U.S.A. 96, 11277 (1999).pubmed.ncbi.nlm.nih.gov/10500167
  8. [8]R. Eckel, R. Ros, A. Ros, S. D. Wilking, N. Sewald, and D. Anselmetti, Identification of Binding Mechanisms in Single Molecule–DNA Complexes, Biophysical Journal 85, 1968 (2003).pubmed.ncbi.nlm.nih.gov/12944309
  9. [9]S. A. Harris, Z. A. Sands, and C. A. Laughton, Molecular Dynamics Simulations of Duplex Stretching Reveal the Importance of Entropy in Determining the Biomechanical Properties of DNA, Biophysical Journal 88, 1684 (2005).pubmed.ncbi.nlm.nih.gov/15626714
  10. [10]M. D. Wang, Stretching DNA with optical tweezers, J. Biophys. 72, (1997).pubmed.ncbi.nlm.nih.gov/9138579
  11. [11]C. ter Burg, P. Rissone, M. Rico-Pasto, F. Ritort, and K. J. Wiese, Experimental Test of Sinai’s Model in DNA Unzipping, Phys. Rev. Lett. 130, 208401 (2023).DOI
  12. [12]U. Bockelmann, P. Thomen, B. Essevaz-Roulet, V. Viasnoff, and F. Heslot, Unzipping DNA with optical tweezers: high sequence sensitivity and force flips., Biophys J 82, 1537 (2002).pubmed.ncbi.nlm.nih.gov/11867467
  13. [13]I. Rouzina and V. A. Bloomfield, Force-Induced Melting of the DNA Double Helix 1. Thermodynamic Analysis, Biophysical Journal 80, 882 (2001).pubmed.ncbi.nlm.nih.gov/11159455
  14. [14]I. Rouzina and V. A. Bloomfield, Force-Induced Melting of the DNA Double Helix. 2. Effect of Solution Conditions, Biophysical Journal 80, 894 (2001).pubmed.ncbi.nlm.nih.gov/11159456
  15. [15]J. F. Marko and E. D. Siggia, Stretching DNA, Macromolecules 28, 8759 (1995).
  16. [16]T. A. Knotts, N. Rathore, D. C. Schwartz, and J. J. de Pablo, A coarse grain model for DNA, The Journal of Chemical Physics 126, 084901 (2007).pubmed.ncbi.nlm.nih.gov/17343470
  17. [17]D. M. Hinckley, G. S. Freeman, J. K. Whitmer, and J. J. de Pablo, An experimentally-informed coarse-grained 3-site-per-nucleotide model of DNA: Structure, thermodynamics, and dynamics of hybridization, J Chem Phys 139, 144903 (2013).DOI
  18. [18]E. Dieterich, J. Camunas-Soler, M. Ribezzzi-Crivellari, U. Seifert, and F. Ritort, Single-molecule measurement of the effective temperature in non-equilibrium steady states, Nature Physics 11, 971 (2015).DOI
  19. [19]S. Park and K. Schulten, Calculating potentials of mean force from steered molecular dynamics simulations., The Journal of Chemical Physics 120, 5946 (2004).pubmed.ncbi.nlm.nih.gov/15267476
  20. [20]G. Hummer and A. Szabo, Free energy reconstruction from nonequilibrium single-molecule pulling experiments., Proceedings of the National Academy of Sciences of the United States of America 98, 3658 (2001).pubmed.ncbi.nlm.nih.gov/11274384
  21. [21]G. Hummer and A. Szabo, Free energy profiles from single-molecule pulling experiments., Proceedings of the National Academy of Sciences of the United States of America 107, 21441 (2010).DOI
  22. [22]P. Nicolini, P. Procacci, and R. Chelli, Hummer and Szabo-like Potential of Mean Force Estimator for Bidirectional Nonequilibrium Pulling Experiments/Simulations, JOURNAL OF PHYSICAL CHEMISTRY B 114, 9546 (2010).DOI
  23. [23]J. Yoo, D. Winogradoff, and A. Aksimentiev, Molecular dynamics simulations of DNA–DNA and DNA–protein interactions, Current Opinion in Structural Biology 64, 88 (2020).DOI
  24. [24]A. D. MacKerell and L. Nilsson, Molecular dynamics simulations of nucleic acid-protein complexes, Curr Opin Struct Biol 18, 194 (2008).DOI
  25. [25]A. Pérez, F. J. Luque, and M. Orozco, Frontiers in Molecular Dynamics Simulations of DNA, Accounts of Chemical Research 45, 196 (2012).DOI
  26. [26]A. Sabei, C. Hognon, J. Martin, and E. Frezza, Dynamics of Protein–RNA Interfaces Using All-Atom Molecular Dynamics Simulations, J. Phys. Chem. B 128, 4865 (2024).
  27. [27]J. Kästner, Umbrella sampling, WIREs Computational Molecular Science 1, 932 (2011).
  28. [28]G. M. Torrie and J. P. Valleau, Nonphysical sampling distributions in Monte Carlo free-energy estimation: Umbrella sampling, Journal of Computational Physics 23, 187 (1977).DOI
  29. [29]C. Chipot and A. Pohorille, editors , Free Energy Calculations: Theory and Applications in Chemistry and Biology, Vol. 86 (Springer, Berlin, Heidelberg, 2007).
  30. [30]E. Flood, C. Boiteux, B. Lev, I. Vorobyov, and T. W. Allen, Atomistic Simulations of Membrane Ion Channel Conduction, Gating, and Modulation, Chem. Rev. 119, 7737 (2019).DOI
  31. [31]C. Maffeo, S. Bhattacharya, J. Yoo, D. Wells, and A. Aksimentiev, Modeling and Simulation of Ion Channels, Chem Rev 112, 6250 (2012).DOI
  32. [32]V. Govind Kumar, A. Polasa, S. Agrawal, T. K. S. Kumar, and M. Moradi, Binding affinity estimation from restrained umbrella sampling simulations, Nat Comput Sci 3, 59 (2023).DOI
  33. [33]H.-J. Woo and B. Roux, Calculation of absolute protein–ligand binding free energy from computer simulations, Proceedings of the National Academy of Sciences 102, 6825 (2005).pubmed.ncbi.nlm.nih.gov/15867154
  34. [34]G. Hummer, J. C. Rasaiah, and J. P. Noworyta, Water conduction through the hydrophobic channel of a carbon nanotube, Nature 414, 188 (2001).pubmed.ncbi.nlm.nih.gov/11700553
  35. [35]A. Kalra, S. Garde, and G. Hummer, Osmotic water transport through carbon nanotube membranes, Proceedings of the National Academy of Sciences 100, 10175 (2003).pubmed.ncbi.nlm.nih.gov/12878724
  36. [36]C. Jarzynski, Nonequilibrium Equality for Free Energy Differences, Phys. Rev. Lett. 78, 2690 (1997).DOI
  37. [37]C. Jarzynski, Equalities and Inequalities: Irreversibility and the Second Law of Thermodynamics at the Nanoscale, Annual Review of Condensed Matter Physics 2, 329 (2011).
  38. [38]G. E. Crooks, Nonequilibrium Measurements of Free Energy Differences for Microscopically Reversible Markovian Systems, Journal of Statistical Physics 90, 1481 (1998).DOI
  39. [39]D. Collin, F. Ritort, C. Jarzynski, S. B. Smith, I. Tinoco, and C. Bustamante, Verification of the Crooks fluctuation theorem and recovery of RNA folding free energies., Nature 437, 231 (2005).DOI
  40. [40]N. C. Harris, Y. Song, and C.-H. Kiang, Experimental free energy surface reconstruction from single-molecule force spectroscopy using Jarzynski’s equality., Physical Review Letters 99, 068101 (2007).DOI
  41. [41]S. S. Nasarayya Chari, K. P. N. Murthy, and R. Inguva, Study of nonequilibrium work distributions from a fluctuating lattice Boltzmann model, Phys. Rev. E 85, 041117 (2012).pubmed.ncbi.nlm.nih.gov/22680429
  42. [42]S. S. N. Chari, R. Inguva, and K. P. N. Murthy, Study of Kinetic Equation for Non-Ideal Gases Using Lattice Boltzmann Method: Interparticle Forces from BBGKY Hierarchy, Journal of Statistical Physics 157, 113 (2014).DOI
  43. [43]J. Liphardt, S. Dumont, S. B. Smith, I. Tinoco, and C. Bustamante, Equilibrium information from nonequilibrium measurements in an experimental test of Jarzynski’s equality., Science (New York, N.Y.) 296, 1832 (2002).pubmed.ncbi.nlm.nih.gov/12052949
  44. [44]D. T. Truong, K. Ho, and M. T. Nguyen, The Jarzynski binding free energy can effectively rank ligand-protein affinities in inadequate samplings, Chemical Physics Letters 840, 141145 (2024).DOI
  45. [45]J. Liphardt, B. Onoa, S. B. Smith, I. Tinoco, and C. Bustamante, Reversible unfolding of single RNA molecules by mechanical force., Science (New York, N.Y) 292, 733 (2001).pubmed.ncbi.nlm.nih.gov/11326101
  46. [46]A. Mossa, S. de Lorenzo, J. M. Huguet, and F. Ritort, Measurement of work in single-molecule pulling experiments., The Journal of Chemical Physics 130, 234116 (2009).DOI
  47. [47]M. Goette and H. Grubmüller, Accuracy and convergence of free energy differences calculated from nonequilibrium switching processes, Journal of Computational Chemistry 30, 447 (2009).DOI
  48. [48]A. Warshel, P. K. Sharma, M. Kato, and W. W. Parson, Modeling electrostatic effects in proteins, Biochim Biophys Acta 1764, 1647 (2006).pubmed.ncbi.nlm.nih.gov/17049320
  49. [49]T. Bas ƀtug and S. Kuyucak, Application of Jarzynski’s equality in simple versus complex systems, (2007).DOI
  50. [50]S. Park, F. Khalili-Araghi, E. Tajkhorshid, and K. Schulten, Free energy calculation from steered molecular dynamics simulations using Jarzynski’s equality, J. Chem. Phys. 119, 3559 (2003).DOI
  51. [51]M. Santosh and P. K. Maiti, Force induced DNA melting, Journal of Physics: Condensed Matter 21, 034113 (2008).arxiv.org/abs/0809.1742
  52. [52]A. Garai, S. Mogurampelly, S. Bag, and P. K. Maiti, Overstretching of B-DNA with various pulling protocols: Appearance of structural polymorphism and S-DNA, J. Chem. Phys. 147, 225102 (2017).DOI
  53. [53]D.A. Case, T.A. Darden, T.E. Cheatham, III, C.L. Simmerling, J. Wang, R.E. Duke, R. Luo, M. Crowley, R.C. Walker, W. Zhang, K.M. Merz, B. Wang, S. Hayik, A. Roitberg, G. Seabra, I. Kolossváry, K.F. Wong, F. Paesani, J. Vanicek, X. Wu, S.R. Brozell, T. Steinbrecher, H. Gohlke, L. Yang, C. Tan, J. Mongan, V. Hornak, G. Cui, D.H. Mathews, M.G. Seetin, C. Sagui, V. Babin, and P.A. Kollman, AMBER 10, (2008).
  54. [54]W. L. Jorgensen, J. Chandrasekhar, J. D. Madura, R. W. Impey, and M. L. Klein, Comparison of simple potential functions for simulating liquid water, The Journal of Chemical Physics 79, 926 (1983).DOI
  55. [55]A. M. Ferrenberg and R. H. Swendsen, New Monte Carlo technique for studying phase transitions, Physical Review Letters 61, 2635 (1988).pubmed.ncbi.nlm.nih.gov/10039183
  56. [56]A. M. Ferrenberg and R. H. Swendsen, Optimized Monte Carlo data analysis, Physical Review Letters 63, 1195 (1989).pubmed.ncbi.nlm.nih.gov/10040500
  57. [57]S. Kumar, J. M. Rosenberg, D. Bouzida, R. H. Swendsen, and P. A. Kollman, The weighted histogram analysis method for free-energy calculations on biomolecules. I. The method, Journal of Computational Chemistry 13, 1011 (1992).DOI
  58. [58]D. W. Ussery, DNA Structure: A-, B- and Z-DNA Helix Families, in Encyclopedia of Life Sciences (John Wiley & Sons, Ltd, 2002).DOI

Paper details

vlnc:W_8e4km4q2
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY-SA 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents