betaFeedback

WorksPhysics and Astronomy

3D radiative transfer of K-series lines of He-like ions with SKIRT

Abstract

High-resolution X-ray spectroscopy with XRISM has resolved line profiles of highly ionised ions, including P Cygni profiles, in many systems containing compact objects. To interpret these line profiles, forward modelling with three-dimensional radiative transfer (3D RT) calculations including the relevant ionic processes is required. Following our previous work on the Lyman-series lines of H-like ions, we present the implementation of the K-series lines of He-like ions with Z = 2-30 in the open-source Monte Carlo RT code SKIRT, providing a numerical tool for interpreting highresolution X-ray spectra of photoionised plasmas. Building upon the framework developed for H-like ions, we incorporate the resonance scattering (RS) and radiative recombination (RR) channels. We also implement the inner-shell ionisation (II) channel of Li-like ions for the production of He-like lines. We resolve fine-structure levels and account for level populations, frequency redistribution, phase function, and linear polarisation through transition-specific Mueller matrices. The implementation reproduces the expected RT effects in He-like lines. The Fe xxv w and y lines, dominated by the RS channel, develop optically thick line-profile distortions and P Cygni profiles in an outflowing plasma, whereas the x and z lines, dominated by the RR and II channels, do not exhibit such behaviour. The line intensities from the RS and RR channels agree well with Cloudy. The II channel further enhances the z line, which is not yet included in Cloudy. The linear polarisation calculations reproduce the analytical and experimental angular dependence of resonance scattering on a line-by-line basis. This extension to He-like lines, together with our previous implementation of H-like lines, enables 3D RT modelling of the major X-ray lines, providing a tool for constraining gas kinematics around compact objects observed with XRISM.

Introduction

In systems containing compact objects such as black holes (BHs) and neutron stars (NSs), part of the gravitational energy released by mass accretion is converted into extreme-UV and X-ray radiation [17]. This intense radiation in turn drives mass outflows through radiatively driven winds [40]. The wind velocity provides information about the transport of matter and kinetic energy from accretion into the surrounding environment. Revealing the gas kinematics around compact objects is therefore crucial for understanding the circulation of matter and energy in the Universe.

High-resolution X-ray spectroscopy is a powerful tool for this purpose because the velocity structure is imprinted on spectral line profiles. This approach has been enabled by the advent of the X-ray Imaging and Spectroscopy Mission (XRISM; [46]), which allows line profiles to be studied in unprecedented detail. Indeed, XRISM has revealed P Cygni profiles in H-like and He-like lines of S, Ar, Ca, and Fe in many compact-object systems (XRISM Collaboration et al. 2024, 2025a,b; Tsujimoto et al. 2025; Chakraborty et al. 2025; Mizumoto et al. 2026), whereas previous X-ray telescopes detected them only in systems with exceptionally high outflow velocities [8].

Spectral line profiles are modified by interactions between photons and outflowing gas in three-dimensional (3D) geometries. Interpreting the observed line profiles therefore requires 3D radiative transfer (RT) calculations. Although one-dimensional (1D) RT codes, such as SPEX [25], Cloudy (Gunas ekera et al. 2025), and XSTAR (Ko & Kallman 1994), have been widely used in X-ray studies, Monte Carlo RT (MCRT) codes offer clear advantages for treating complex 3D geometries and velocity fields [44] (Noebauer & Sim 2019).

SKIRT [9, 2, 10] is a state-of-the-art MCRT code with flexible 3D geometries, radiation sources, spatial grids, detectors, and interfaces to hydrodynamical simulations. The code is available as open-source software1 and is supported by extensive documentation and tutorials2. Modern acceleration techniques, including peel-off, forced scattering, continuous absorption, composite biasing, and explicit absorption (Baes et al. [6, 5, 3]), make it well suited to interpreting high-resolution observations at feasible computational cost. The code was originally developed for dust radiative transfer from the sub-mm to ultraviolet bands (Baes et al. [4]) and has since been extended to other wavelength regimes, including molecular and atomic excitation in the millimetre band (Matsumoto et al. [29]) and several X-ray processes involving neutral matter, free electrons, and bound electrons (Vander Meulen et al. [49, 50]).

We recently began incorporating X-ray ionic processes into SKIRT to extend its applicability to high-resolution X-ray spectroscopy. The first extension implemented the n→1n \to1 transitions of H-like ions with Z=1Z = 1–3030 (Sameshima et al. [43]). In this paper, we extend the framework to the corresponding transitions of He-like ions. We follow the basic scheme established for H-like ions, but several important differences arise from the more complex atomic structure. Whereas H-like lines are modelled using only resonance scattering (RS) and radiative recombination (RR), He-like lines also involve inner-shell ionisation (II), dielectronic capture (DC), and autoionisation (AI).

The remainder of this paper is organised as follows. Section 2 describes the scope, physical processes, and formalism. Section 3 presents the implementation, Sect. 4 the verification tests, Sect. 5 a laboratory plasma application, Sect. 6 the limitations of the present work, and Sect. 7 summarises the results.

Physics

Scope

Our scope is low-density photoionised plasmas around compact objects. These plasmas are assumed to be under non-local thermodynamic equilibrium (NLTE) conditions, in which radiative processes dominate over collisional processes. The density and optical-depth ranges over which this approximation holds depend on the element and transitions of interest; we discuss some of these limitations in Sect. 6. A fully self-consistent treatment of such plasmas requires RT calculations to determine the ionisation balance, level populations, and electron temperature consistently with the radiation field and to synthesise X-ray spectra. In the present work, however, we focus on the RT calculation for a prescribed plasma state, with the ionisation balance and electron temperature provided externally (Sect. 2.3).

In this work, we focus on the K-series (n→1n \to1) lines of He-like ions with Z=2Z = 2–30. The lines are denoted Heα\alpha (2→12 \to1), Heβ\beta (3→13 \to1), Heγ\gamma (4→14 \to1), and so on. Following our previous implementation for H-like ions (Sameshima et al. [43]), we consider upper levels up to n=10n = 10 and resolve the fine-structure levels. This choice is motivated by recent XRISM observations, which resolve fine-structure levels (Miller et al. [32]) and detect transitions up to n=9n = 9 (Heθ\theta) in Fe xxv (XRISM Collaboration et al. [55]). We also include the linear polarisation associated with resonance scattering, because it can modify the emergent line profiles in anisotropic geometries.

Atomic processes

As a basis for the following implementation, we outline the atomic levels and processes responsible for the formation of the He-like K-series lines. We use Fe as an illustrative example, although the same considerations apply to all He-like ions. A general description of the relevant atomic physics in photoionised plasmas is given by Osterbrock & Ferland [37].

Levels and transitions

We first describe the relevant levels and transitions illustrated in Figure 1. We consider (i) the ground state of He-like ions (1s2 1S01s^2\ ^1S_0) together with the ground states of the two adjacent ionisation stages, namely (ii) H-like ions (1s 2S1/21s\ ^2S_{1/2}) and (iii) Li-like ions (2s 2S1/22s\ ^2S_{1/2}). For the He-like ions, we also include (iv) singly excited states up to n=10n = 10 and (v) doubly excited states, in which both electrons are excited from the 1s1s shell. The doubly excited states lie above the ionisation threshold and can decay via the Auger process; they are therefore referred to as autoionising levels. Despite this name, they can also decay radiatively without ionisation, with radiative decay becoming dominant for high-ZZ ions [38].

Atomic levels and processes included in the present implementation

Figure 1. Atomic levels and processes included in the present implementation. AA and BB denote the Einstein coefficients, JJ is the radiation field, and BJBJ represents the radiative excitation rate. RS, RR, PI, II, DC, and AI denote resonance scattering, radiative recombination, photoionisation, inner-shell ionisation, dielectronic capture, and autoionisation, respectively. Other symbols are defined in the main text.

The Heα\alpha (n=2→1n = 2 \to1) complex comprises the following four transitions between fine-structure levels.

ww : 1s 2p 1P1→1s2 1S01s\ 2p\ ^1P_1 \to1s^2\ ^1S_0

xx : 1s 2p 3P2→1s2 1S01s\ 2p\ ^3P_2 \to1s^2\ ^1S_0

yy : 1s 2p 3P1→1s2 1S01s\ 2p\ ^3P_1 \to1s^2\ ^1S_0

zz : 1s 2s 3S1→1s2 1S01s\ 2s\ ^3S_1 \to1s^2\ ^1S_0

The ww line is an allowed electric dipole (E1) transition because it satisfies all E1 selection rules. The zz and xx lines are forbidden transitions, whose dominant decay channels are magnetic dipole (M1) and magnetic quadrupole (M2), respectively. The yy line violates only the spin-selection rule (ΔS=0\Delta S = 0), whose importance decreases with increasing ZZ because of the growing contribution of spin–orbit coupling. For Z=26Z = 26 (Fe), the oscillator strength of the yy line is within approximately one order of magnitude of that of the ww line (Fig. 2). The yy line remains an intercombination transition, but its oscillator strength approaches that of an allowed transition as ZZ increases. The same classification applies to the higher (n>2n > 2) series, whose components are similarly denoted as, for example, Heβ\beta ww, xx, yy, and zz.

Populations

We next review the physical conditions relevant to photoionised plasmas. These conditions are conveniently characterised by the ionisation parameter ξ=Lx/nHr2\xi= L_{\mathrm{x}/n_{\mathrm{H}}r^2} [45], where LxL_{\mathrm{x}} is the incident X-ray luminosity in the 1–1000 Ryd range, nHn_{\mathrm{H}} is the local hydrogen number density, and rr is the distance from the X-ray source to the plasma. Figure 3(a) shows the intensities of the four Fe xxv Heα\alpha lines, while Figure 3(b–d) shows the corresponding plasma properties as a function of ξ\xi. The peak emissivity of the ww line and the peak Fe+24^{+24} ion fraction both occur at log⁡ξ≃3.3\log\xi\simeq3.3 (panels (a) and (c)). At this ionisation parameter, the electron temperature determined from thermal balance is approximately 1 MK (panel (b)), so that collisional processes are less important compared to radiative processes. The ground-state population of Fe+24^{+24} is nearly unity, whereas the populations of the excited levels are negligible (panel (d)).

Figure 3. (a) Fe Heα line intensities, (b) electron temperature, (c) charge populations, (d) level populations, and (e)–(j) rates of the processes that populate (y>0y > 0, solid) or depopulate (y<0y < 0, dashed) each level as a function of the ionisation parameter ξ\xi. The calculations were performed with SPEX [25] in the low-density (1010 cm−310^{10}\ \mathrm{cm}^{-3}) and optically thin limit. In panel (c), the numbers denote the number of stripped electrons. In panels (e)–(j), the rates (rr) are plotted as y=arcsinh⁡(r)y = \operatorname{arcsinh}(r), so that they are approximately logarithmic, y≈log⁡∣r∣y \approx\log|r|, for ∣r∣≫1|r| \gg1 while preserving the sign (positive for population and negative for depopulation). The incident radiation is assumed to be a power-law SED with a photon index of 2 over 0.001–20 keV. The individual processes are described in the main text.

Processes

We finally describe the relevant atomic processes. Panels (e)–(j) show the rates of radiative and Auger processes that populate (solid curves) and depopulate (dashed curves) each level. For convenience, we denote the upper level of line aa by aˉ\bar{a} (e.g. wˉ\bar{w} for 1s 2p 1P11s\ 2p\ ^1P_1).

The He-like ground state is populated by radiative recombination (RR) from Fe+25^{+25} (‘Rec’) and by radiative decay from excited levels of Fe+24^{+24} (‘Dec (+)’). These processes also populate wˉ\bar{w}, xˉ\bar{x}, yˉ\bar{y}, and zˉ\bar{z}. Radiative excitation from the ground state (‘Exc (+)’) is the dominant population mechanism for wˉ\bar{w} and yˉ\bar{y}, whereas it is almost negligible for xˉ\bar{x} and zˉ\bar{z}, reflecting their much smaller oscillator strengths (Figure 2). These processes are also important for H-like ions. In addition, He-like ions are populated through inner-shell ionisation (‘II’) of Li-like ions (Fe+23^{+23}). When a 1s electron is photoionised from the ground state of a Li-like ion (1s22s 2S1/21s^2 2s\,{}^2S_{1/2}), the resulting He-like ion is left in either the 1s 2s 3S11s\,2s\,{}^3S_1 (zˉ\bar{z}) or 1s 2s 1S01s\,2s\,{}^1S_0 excited state. The former decays predominantly via the z line, whereas the latter decays mainly through two-photon emission. This process is most important around log⁡ξ∼3\log\xi\sim3, where the Fe+23^{+23} ion fraction reaches its maximum (panels (c) and (i)). The autoionising levels are primarily populated by dielectronic capture (‘DC’), in which a free electron is captured while simultaneously exciting a bound electron, thereby producing a doubly excited state. However, DC is negligible under the ionisation conditions considered here (panel (j)), because the electron temperature in a photoionised plasma is too low for efficient collisional excitation of the inner-shell electron.

Figure 2. Oscillator strengths of the Heα\alpha ww (red), xx (yellow-green), yy (cyan), and zz (purple) lines, together with the Heβ\beta ww line, for He-like ions with Z=2Z = 2–30. The atomic data are taken from the SPEX v3.08.01 database (Kaastra et al. [25]).

The He-like ground state is depopulated by photoionisation to Fe+25^{+25} (‘Ion’) and by radiative excitation to excited levels (‘Exc (−)’). The excited levels are depopulated through radiative decay to lower levels (‘Dec (−)’). These decays occur either directly to the ground state or through cascades involving intermediate levels. For example, yˉ\bar{y} can decay directly to the ground state by emitting a y-line photon, or cascade through zˉ\bar{z}, emitting a UV photon (yˉ→zˉ\bar{y}\to\bar{z}) followed by a z-line photon. The autoionising levels are depopulated either by autoionisation (AI), through the ejection of an Auger electron, or by radiative decay, although both processes are negligible under the ionisation conditions considered here (panel (j)).

Formalism

We formulate the atomic processes described above following the approach adopted for the H-like ions [43]. The treatments of RR and RS are identical to those for H-like ions and are briefly reviewed here for completeness. The II, AI, and DC processes are newly implemented in this work.

Throughout the following formulation, the densities of the H-like, He-like, and Li-like ions for the elements of interest, as well as the electron temperature, are treated as externally prescribed input parameters. These parameters can be obtained from photoionisation-equilibrium calculations performed with 1D RT codes such as SPEX [25], Cloudy (Gunasekera et al. 2025), and XSTAR (Ko & Kallman 1994).

The excited levels, including the autoionising levels, are indexed by i=1,2,3,…i=1,2,3,\ldots in ascending order of energy (e.g. i=1i=1 for zˉ\bar{z}). The level populations, N=(N1,N2,…,NM)TN=(N_1,N_2,\ldots,N_M)^{\mathsf{T}}, are obtained by solving the steady-state rate equation,

N˙=ΓN+S=0.(1)\dot{N}=\Gamma N+S=0. \tag*{(1)}

Here, Γ\Gamma represents transitions among the excited levels and SS is the source term.

The matrix elements are given by

ΓijNj=∑j=1MAjiNj−Ni(∑k=1i−1Aik+AiAI+Ai2γ),(2)\Gamma_{ij}N_j=\sum_{j=1}^{M}A_{ji}N_j-N_i\left(\sum_{k=1}^{i-1}A_{ik}+A_i^{\mathrm{AI}}+A_i^{2\gamma}\right), \tag*{(2)}

where AjiA_{ji} is the Einstein AA coefficient for the transition from level jj to ii, and AiAIA_i^{\mathrm{AI}} and Ai2γA_i^{2\gamma} are the total autoionisation rate and the two-photon decay rate of level ii, respectively. The first term represents the population rate from level jj to ii (‘Dec (+)’ in Figure 3), whereas the second term represents the depopulation rate from level ii to all lower levels (‘Dec (−)’ in Figure 3). The latter includes all spontaneous decay processes, namely radiative decay (including both one- and two-photon decay) and autoionisation. Stimulated processes are neglected. Stimulated emission is negligible compared with spontaneous emission (Eq. (3) of [43]), while stimulated absorption, namely radiative excitation from excited levels, is also negligible under the conditions considered here (see ‘Exc (−)’ for the excited levels in Figure 3).

The ground levels of the H-like (with a density nH−liken_{\mathrm{H-like}}), He-like (nHe−liken_{\mathrm{He-like}}), and Li-like (nLi−liken_{\mathrm{Li-like}}) ions are not included in NN. Instead, their contributions are incorporated through the source term SS. The element SiS_i represents the net rate populating excited level ii from these ground levels.

RR From the H-like ground level, the RR process populates level ii at the rate

SiRR≡nenH−likeαiRR(T).(3)S_i^{\mathrm{RR}}\equiv n_{\mathrm{e}}n_{\mathrm{H-like}}\alpha_i^{\mathrm{RR}}(T). \tag*{(3)}

Here, nen_{\mathrm{e}} is the electron density and αiRR(T)\alpha_i^{\mathrm{RR}}(T) is the RR rate coefficient into level ii at electron temperature TT. The coefficient includes contributions from both direct radiative recombination into the excited level and dielectronic capture into doubly excited levels.

RS From the He-like ground level, the RS process populates level ii at the rate

SiRS≡nHe−likeB0iJ(νi0),(4)S_i^{\mathrm{RS}}\equiv n_{\mathrm{He-like}}B_{0i}J(\nu_{i0}), \tag*{(4)}

where B0iB_{0i} is the Einstein BB coefficient for absorption from the ground level to level ii, and J(νi0)J(\nu_{i0}) is the mean intensity of the local radiation field at the transition frequency νi0\nu_{i0}.

II From the Li-like ground level, the II process populates two excited levels, 1s 2s 3S11s\,2s\,{}^3S_1 (i=1i=1 or zˉ\bar{z}) and 1s 2s 1S01s\,2s\,{}^1S_0 (i=5i=5). The total rate is determined by the inner-shell photoionisation cross section αII(ν)\alpha^{\mathrm{II}}(\nu) multiplied by the ionising photon density and integrated over frequencies above the ionisation threshold νth\nu_{\mathrm{th}}. The rate is partitioned between the two levels according to their statistical weights (g1=3g_1=3 and g5=1g_5=1).

SiII={gig1+g5nLi−like∫νth∞4πJ(ν)hναII(ν) dν,(i=1,5),0,(i≠1,5).(5)S_i^{\mathrm{II}}= \begin{cases} \frac{g_i}{g_1+g_5}n_{\mathrm{Li-like}}\int_{\nu_{\mathrm{th}}}^{\infty}\frac{4\pi J(\nu)}{h\nu}\alpha^{\mathrm{II}}(\nu)\,\mathrm{d}\nu, & (i=1,5),\\ 0, & (i\ne1,5). \end{cases} \tag*{(5)}

We treat these three source terms independently and obtain the corresponding partial level populations by solving

ΓNRS+SRS=0,(6)\Gamma N_{\mathrm{RS}}+S^{\mathrm{RS}}=0, \tag*{(6)}
ΓNRR+SRR=0,(7)\Gamma N_{\mathrm{RR}}+S^{\mathrm{RR}}=0, \tag*{(7)}
ΓNII+SII=0.(8)\Gamma N_{\mathrm{II}}+S^{\mathrm{II}}=0. \tag*{(8)}

The solution of (1) is then

N=NRS+NRR+NII,(9)N=N_{\mathrm{RS}}+N_{\mathrm{RR}}+N_{\mathrm{II}}, \tag*{(9)}

by linearity.

Implementation

We implement the atomic processes described in Sect. 2 in SKIRT. Continuum RT processes in partially ionised media, which are not the focus of this paper, are also implemented in SKIRT, including photoabsorption, fluorescence, and Compton scattering by free and bound electrons (Lauwers et al. in prep.), as an extension of the previous implementation for neutral matter Vander Meulen et al. [49]. Below, we describe the implementation of the atomic processes responsible for the production of the He-like lines.

An interaction between an incident photon and matter is classified as either scattering or absorption. A scattering event produces a new photon, generally with a different frequency and propagation direction. An absorption event either destroys the photon or is followed by the re-emission of one or more photons. In the present implementation, we follow only photons scattered or re-emitted in the n→1n \to1 transitions of He-like ions. Photons emitted through lower-energy transitions are discarded, as they cannot subsequently produce n→1n \to1 photons. We further assume that radiative recombination occurs immediately following photoionisation. Consequently, both genuine scattering events and absorption followed by re-emission are treated computationally as scattering events.

A photon packet is described by the Stokes vector5 I(ν,k^)=(I(ν,k^),Q(ν,k^),U(ν,k^))T\mathbf{I}(\nu,\hat{k}) = (I(\nu,\hat{k}), Q(\nu,\hat{k}), U(\nu,\hat{k}))^{\mathrm{T}}, where ν\nu is the photon frequency and k^\hat{k} is the unit vector in the propagation direction. The photon-packet properties are tracked at floating-point precision during transport and are binned only when recorded by an instrument. During an interaction, an incident photon packet with Stokes vector I(ν,k^)\mathbf{I}(\nu,\hat{k}) is converted into an emergent photon packet with Stokes vector I(ν′,k^′)\mathbf{I}(\nu',\hat{k}'). For the processes considered here, this conversion is characterised by three quantities: the amplitude, branching ratio, and redistribution. The atomic data adopted in this work are summarised in Table 1.

Atomic dataSource
Transition frequencies νi0\nu_{i0}SPEX v3.08.01 ([25])
Einstein coefficients AjiA_{ji}SPEX v3.08.01 ([25])
Autoionisation rates AiAIA_i^{\mathrm{AI}}SPEX v3.08.01 ([25])
Two-photon decay rates Ai2γA_i^{2\gamma}SPEX v3.08.01 ([25])
Photoionisation cross sectionsVerner & Yakovlev [51]
Level-resolved radiative recombination coefficients αiRR(T)\alpha_i^{\mathrm{RR}}(T)Mao & Kaastra [28], based on Badnell [1]
Dielectronic capture ratesDerived through detailed balance (Mewe [31])

Table 1. Atomic data adopted in this work.

Amplitude The amplitude determines the probability for any of the new interactions and is given by the product of the local absorber density and the absorption cross section. For RS, we adopt the line cross section including natural and thermal broadening represented by a Voigt profile, following Sameshima et al. [43]. For RR and II, we adopt the parameterised photoionisation cross sections6 of Verner & Yakovlev [51].

Branching ratio The branching ratio gives the probability that a given interaction produces a particular emission line. It is defined as the emission rate of that line divided by the corresponding absorption rate. The emission rates are determined from the upper-level populations obtained by solving the rate equations: (6) for RS, (7) for RR, and (8) for II. The level-resolved radiative recombination coefficient αiRR(T)\alpha^{\mathrm{RR}}_{i}(T), averaged over a Maxwellian electron energy distribution at temperature TT, is taken from the parameterisations7 of Mao & Kaastra [28], which are based on the Atomic Data and Analysis Structure (ADAS) database Badnell [1]. The dielectronic capture rate is calculated from the autoionisation rate using the principle of detailed balance Mewe [31].

Redistribution The redistribution determines the frequency, propagation direction, and polarisation state of the emergent photon relative to the incident photon. For RS, we follow the formalism of Hummer [23]. If the incident (absorbed) and emergent (re-emitted) photons correspond to the same bound–bound transition, the scattering is coherent and the emergent photon retains the memory of the incident photon. The emergent photon therefore retains the incident photon frequency in the atomic rest frame, while its frequency in the observer’s frame is Doppler-shifted according to the atom’s velocity, sampled following Camps et al. [11]. This redistribution formalism naturally accounts for the behaviour in both the line core and wings without requiring separate approximate treatments. The angular redistribution and the associated linear polarisation are described by a linear combination of the monopole and dipole Mueller matrices (M(m)(M^{(m)} and M(d))M^{(d)}) as

M(θ)=E1M(m)(θ)+E2M(d)(θ)=E112(100000000)+E238(1+cos⁡2θ−sin⁡2θ0−sin⁡2θ1+cos⁡2θ0002cos⁡θ).(10)\begin{aligned} M(\theta) = E_1 M^{(m)}(\theta) + E_2 M^{(d)}(\theta) \\ &= E_1 \frac{1}{2} \begin{pmatrix} 1 & 0 & 0 \\ 0 & 0 & 0 \\ 0 & 0 & 0 \end{pmatrix} \\ &+ E_2 \frac{3}{8} \begin{pmatrix} 1+\cos^2\theta& -\sin^2\theta& 0 \\ -\sin^2\theta& 1+\cos^2\theta& 0 \\ 0 & 0 & 2\cos\theta \end{pmatrix}. \tag*{(10)} \end{aligned}

Here, θ\theta is the angle between the incident and emergent photon directions. Hamilton [21] derived the coefficients E1E_1 and E2E_2 (E1+E2=1E_1 + E_2 = 1) as functions of the total angular momenta of the lower and upper levels (JJ and J′J') and their difference (ΔJ≡J′−J\Delta J \equiv J' - J), as listed in Table 2. We apply this formalism to all transitions with ∣ΔJ∣≤1|\Delta J| \le1, since RS is important only for E1 transitions, for which ΔJ={−1,0,1}\Delta J = \{-1, 0, 1\}. For the much weaker transitions with ∣ΔJ∣≥2|\Delta J| \ge2, we adopt isotropic (monopole) scattering (E1=1E_1 = 1, E2=0E_2 = 0).

ΔJ\Delta JE1E_1E2E_2
111103J(6J+7)(J+1)(2J+1)\frac{1}{10}\frac{3J(6J+7)}{(J+1)(2J+1)}110(2J+5)(J+2)(J+1)(2J+1)\frac{1}{10}\frac{(2J+5)(J+2)}{(J+1)(2J+1)}
001103(2J2+2J+1)J(J+1)\frac{1}{10}\frac{3(2J^2+2J+1)}{J(J+1)}110(2J−1)(2J+3)J(J+1)\frac{1}{10}\frac{(2J-1)(2J+3)}{J(J+1)}
−1-11103(J+1)(6J−1)J(2J+1)\frac{1}{10}\frac{3(J+1)(6J-1)}{J(2J+1)}110(2J−3)(J−1)J(2J+1)\frac{1}{10}\frac{(2J-3)(J-1)}{J(2J+1)}

Table 2. Weights of the monopole (E1E_1) and dipole components (E2E_2) in the Mueller matrices.

Our RS implementation also treats the case in which the incident and emergent photons correspond to different bound–bound transitions. In this case, the frequency redistribution is incoherent in the atomic rest frame, with the emergent photon frequency in that frame set by the emission transition frequency. The scattering-atom velocity is sampled as in the coherent case and determines the Doppler shift of the emergent photon in the observer’s frame. The angular distribution is assumed to be purely monopole. The same treatment is adopted for the RR and II channels.

Verification

We now validate the implementation described in Sect. 3. We compare synthetic SKIRT spectra with analytical predictions and with the results of a 1D RT code. Because the implementation relies on SPEX Kaastra et al. [25], we use Cloudy c25 Gunas ekera et al. (2025) as an independent benchmark.

The four Heα\alpha lines (w, x, y, and z) have markedly different oscillator strengths (Figure 2), and consequently the dominant population and depopulation mechanisms of their upper levels differ (Figure 3). These differences give rise to distinct RT effects on the line intensities and profiles, providing powerful diagnostics of photoionised plasmas when modelled properly. We demonstrate two such effects: the dependence of the line intensities on optical depth (Sect. 4.1) and the modification of the line profiles by a velocity field (Sect. 4.2) using the Fe XXV lines.

In both cases, we consider a spherical shell of photoionised gas consisting of H-like, He-like, and Li-like Fe ions illuminated by an isotropic, unpolarised central point source with a flat

Notes. The values in Hamilton [21] are recalculated to be applicable to Eq. (10). JJ denotes the total angular momentum of the lower level and ΔJ\Delta J denotes the difference in total angular momentum between the lower and upper levels of the transition.

spectral energy distribution (SED). In the SKIRT simulations, we used 101010^{10} photon packets, 100 radial grid cells, and 0.1 eV output spectral bins for each run. The H-like, He-like, and Li-like ion densities, nH−liken_{\mathrm{H-like}}, nHe−liken_{\mathrm{He-like}}, and nLi−liken_{\mathrm{Li-like}}, together with the electron temperature TT, were computed with Cloudy and imported into each radial cell of the SKIRT model. The populations of the excited levels of the He-like ions were then computed by solving the rate equations (Eqs. (6)–(8)). In the Cloudy calculations, all of these quantities were computed self-consistently.

Optical depth effects

Line profile distortion

Photons at the resonance-line frequencies experience large optical depths and become effectively trapped in the gas through numerous resonance-scattering events. They escape only after repeated frequency redistribution shifts them sufficiently far from the line centre. As a result, the emergent line profile is strongly distorted, with a suppressed core and enhanced wings. Such profiles have been derived analytically ([35, 22, 16]) and reproduced by 3D MCRT calculations for H-like ions with SKIRT ([11, 43]). Most 1D RT codes, however, adopt the escape probability approximation, in which frequency redistribution by resonance scattering is not treated explicitly. We examine this effect using the present implementation for He-like ions. We consider a spherical shell with a uniform density of 1010 cm−310^{10}\ \mathrm{cm}^{-3} and vary the hydrogen column density over NH=1020N_{\mathrm{H}}=10^{20}–1024 cm−210^{24}\ \mathrm{cm}^{-2} in steps of 0.2 dex. The ionisation parameter is fixed at ξ=103.1 erg s−1cm\xi=10^{3.1}\ \mathrm{erg\ s}^{-1}\mathrm{cm}, where all three production channels contribute significantly (Figure 3).

The synthetic emission spectra in the Fe Heα\alpha band are shown in Figure 4, with the contributions from the three production channels displayed separately. For the w and y lines, the dominant production mechanisms are RS and RR (Figure 3, panels (f) and (h)). Their line profiles are distorted by repeated resonance scattering. This effect becomes apparent for the w line at NH≳1022 cm−2N_{\mathrm{H}}\gtrsim10^{22}\ \mathrm{cm}^{-2} and for the y line at NH≳1023 cm−2N_{\mathrm{H}}\gtrsim10^{23}\ \mathrm{cm}^{-2}, reflecting the order-of-magnitude difference in their oscillator strengths (Figure 2). By contrast, resonance scattering is negligible for the x and z lines because their oscillator strengths are many orders of magnitude smaller. Consequently, their line profiles remain essentially unchanged over the investigated range of NHN_{\mathrm{H}}.

Figure 4. Fe Heα line profiles calculated with SKIRT for column densities of 102110^{21}, 102210^{22}, 102310^{23}, and 1024 cm−210^{24}\ \mathrm{cm}^{-2}, shown in panels (a)–(d), respectively. The contributions from resonance scattering (RS; blue), radiative recombination (RR; orange), and inner-shell ionisation (II; green), classified according to the channel of the initial interaction, are shown separately. The intensities are normalised to the RS contribution to the ww line at NH=1021 cm−2N_{\mathrm{H}} = 10^{21}\ \mathrm{cm}^{-2}.

Line intensity

We next evaluated the integrated line intensity (II) as a function of NHN_{\mathrm{H}} and compared the results with those from Cloudy. Since, to first order, II is proportional to the amount of emitting gas, we plot I/NHI/N_{\mathrm{H}} as a function of NHN_{\mathrm{H}} to highlight deviations from linearity over a wide dynamic range.

The results of the two codes are compared in Figure 5 (a). They show broadly similar trends. For the w line, and to a lesser extent the y line, I/NHI/N_{\mathrm{H}} decreases with increasing column density. This behaviour arises because the absorption at the resonance-line frequencies becomes saturated, so the number of absorbed photons no longer increases linearly with column density. Radiative cascades (e.g. yˉ→zˉ→ground\bar{y}\rightarrow\bar{z}\rightarrow\mathrm{ground}) further reduce the emitted intensity of these lines.

Figure 5. (a) Fe Heα ww (red), xx (blue), yy (green), and zz (purple) line intensities (II) normalised by the hydrogen column density (NHN_{\mathrm{H}}), calculated with SKIRT (solid curves) and Cloudy (crosses). The dashed curve shows the SKIRT prediction for the zz line with the contribution from inner-shell ionisation (II) excluded (‘Total−II’). (b) Fe Heβ ww/Heα ww line ratio calculated with SKIRT (black curve) and Cloudy (grey crosses). The lower horizontal axis gives the hydrogen column density (NHN_{\mathrm{H}}), while the upper axis shows the corresponding line-centre optical depth of the Heα ww transition (τ0\tau_0).

For the x and z lines, I/NHI/N_{\mathrm{H}} remains nearly constant with column density, because they are produced mainly through the RR and II channels. These channels remain optically thin even at NH=1024 cm−2N_{\mathrm{H}}=10^{24}\ \mathrm{cm}^{-2}, so their production rates remain approximately proportional to NHN_{\mathrm{H}}.

There are nevertheless several noticeable differences between the two codes. First, the predicted I/NHI/N_{\mathrm{H}} of the z line differs significantly. This is a known limitation of Cloudy, which does not yet include the II channel for producing the z line ([34]). Indeed, the SKIRT calculation performed without the II channel (dashed curve in Figure 5 (a)) agrees much better with the Cloudy result.

In the optically thin limit, the two codes agree well for the x and y lines, but less well for the w and z lines. Such differences may arise either from the adopted interaction amplitudes or from the branching ratios. We verified the interaction amplitudes by repeating the tests described in Sect. 3 of Sameshima et al. [43] and found excellent agreement between the two codes for all channels. We therefore attribute the remaining differences primarily to the branching ratios, which may reflect differences in the level-population calculations and atomic data adopted by the two codes.

Line ratio

Finally, we examined the Heβ ww/Heα ww ratio, which has been proposed as a diagnostic of column density [13]. The ratio initially increases with column density because the larger optical depth of Heα ww causes its intensity to saturate earlier than that of Heβ ww. At still higher column densities, however, repeated resonance scattering degrades Heβ ww photons into lower-energy photons, causing the ratio to decline towards zero. The SKIRT calculation reproduces this behaviour and agrees well with the Cloudy result (Fig. 5 (b)).

Velocity effects

In outflowing gas, resonance lines often exhibit P Cygni profiles, consisting of blue-shifted absorption produced by gas moving towards the observer in the transmitted spectrum together with emission centred on the rest wavelength in the scattered spectrum. For the Fe xxv Heα complex, this behaviour is expected for the ww and yy lines through the RS channel, but not for the xx and zz lines because their resonance scattering is negligible and they therefore do not produce absorption features.

As a benchmark, we calculated analytical P Cygni profiles using a publicly available tool originally developed for supernova ejecta.8 The calculation assumes a homologously expanding spherical flow and evaluates the line profiles under the Sobolev approximation, which is appropriate for flows with large velocity gradients (Jeffery & Branch [24]). The optical depth is prescribed as an exponential function of position, following Thomas et al. [47].

We performed SKIRT simulations using the same velocity and density distributions as in the analytical calculation. Because the analytical code computes only resonance-line profiles, the comparison was restricted to the ww and yy lines. The SKIRT spectra from the RS channel show excellent agreement with the analytical profiles for both lines (Figure 6). The total spectra exhibit additional emission in all four lines owing to the RR and II channels. As expected, the xx and zz lines do not develop P Cygni profiles.

Figure 6. Fe Heα line profiles in a homologously expanding spherical flow, calculated with SKIRT (black curve) and compared with the analytical solution of Jeffery & Branch [24] (blue crosses). The SKIRT spectrum including only the resonance-scattering (RS) contribution is also shown (blue curve). For display purposes, all spectra are convolved with a Gaussian of 5 eV FWHM and rebinned to 0.5 eV, comparable to the spectral resolution of XRISM. The horizontal dotted line indicates the incident continuum level, and the vertical dashed lines mark the rest-frame line energies. The model parameters are: time since explosion, 3000 s; maximum ejecta velocity, 0.01c0.01c; photospheric velocity, 5×10−4c5 \times10^{-4}c; line-centre optical depth, 0.2; and density-stratification parameter, 5.0×107 cm s−15.0 \times10^{7}\ \mathrm{cm\ s^{-1}}.

Demonstration

Setup

We present a demonstration of the linear polarisation induced by resonance scattering. We adopt a simple setup motivated by the laboratory experiment of Rudolph et al. [42], providing a clear illustration of how the properties of the resonance lines depend on the scattering direction. Although the geometry considered here is simple, the same calculations can be applied to more complex models with 3D geometries and velocity structures.

In this experiment, highly charged Fe ions from He-like to F-like charge states (Fe+24\mathrm{Fe}^{+24}–Fe+17\mathrm{Fe}^{+17}) were produced and trapped in

an electron beam ion trap (EBIT), which is placed in a beam line of the PETRA III synchrotron facility. The ions are resonantly excited by the linearly polarised synchrotron X-ray emission. The injected X-ray energy was monochromatised using a double-crystal monochromator, which was scanned across an energy range to cover their n=2→1n = 2 \to1 transitions (Figure 1 in Rudolph et al. [42]). Two Ge detectors are placed perpendicular to the incident X-ray emission; one is along the polarisation plane and the other perpendicular to it. The ratio of the line intensity observed by the two detectors is different line by line, reflecting their difference in the E1E_1 and E2E_2 coefficients in Eq. (10). Our SKIRT implementation should be able to explain the result.

Simulation

We performed SKIRT simulations using the setup shown in Figure 7. A highly ionised spherical gas consisting of Fe+24\mathrm{Fe}^{+24} and Fe+25\mathrm{Fe}^{+25} with equal abundances was placed at the origin. The gas has a uniform density and a temperature of 10610^{6} K. Its column density through the centre corresponds to an optical depth of 0.001 in the Heα ww line. The incident source is a parallel photon beam propagating in the positive zz direction.

Figure 7. Schematic view of the SKIRT simulation motivated by the experiments of Rudolph et al. [42].

We considered two cases for the incident radiation: one representing the laboratory experiment and the other a putative photoionising source around compact objects. In the first case, completely linearly polarised photons are injected with the electric vector parallel to the yy axis, corresponding to Stokes parameters (I,Q,U)=(1,1,0)(I,Q,U) = (1,1,0) in the reference frame defined by the yy axis. The incident radiation is monochromatic, and a separate SKIRT simulation is performed for each incident photon energy across the energy range of interest. The resulting spectra are then combined to produce the final synthetic spectrum. In the second case, completely unpolarised radiation with (I,Q,U)=(1,0,0)(I,Q,U) = (1,0,0) is adopted. The incident spectrum is continuous, so the full synthetic spectrum is obtained in a single SKIRT simulation.

In both cases, SKIRT detectors are placed at different polar (θ\theta) and azimuthal (ϕ\phi) angles. In the laboratory configuration, the gas sphere at the origin represents the EBIT plasma, the incident monochromatic and linearly polarised beam represents the synchrotron radiation, and the two Ge detectors correspond to viewing directions at (θ,ϕ)=(π/2,0)(\theta,\phi) = (\pi/2, 0) along the xx axis and (π/2,π/2)(\pi/2,\pi/2) along the yy axis.

Each simulation used 101010^{10} photon packets, 100 radial grid cells, and 0.3 eV output spectral bins. We extracted the scattered spectra separately for the Stokes II and QQ parameters in the observer’s frame at each viewing direction. We focus on the Heα\alpha ww and yy lines implemented in the present work together with the Lyα1\alpha_1 and Lyα2\alpha_2 lines implemented by Sameshima et al. [43]. Their corresponding coefficients are (E1,E2)=(0,1)(E_1,E_2) = (0,1) for the ww and yy lines (pure dipole scattering), (1,0)(1,0) for Lyα2\alpha_2 (pure monopole scattering), and (0.5,0.5)(0.5,0.5) for Lyα1\alpha_1 (equal monopole and dipole contributions).

Although Fe is used here as an illustrative example, the E1E_1 and E2E_2 coefficients depend only on the angular momenta of the lower and upper levels. Consequently, the same formalism applies to all H-like and He-like ions included in the present implementation.

Results

Figure 8 shows the scattered spectra synthesised with SKIRT. The upper and lower panels show the Stokes II and QQ spectra, respectively. The left-hand panels correspond to a linearly polarised incident source, while the right-hand panels show the results for an unpolarised incident source. Figure 9 presents the normalised scattered intensity (II; upper panels) and polarisation degree (∣Q∣/I|Q|/I; lower panels) as a function of θ\theta for each resonance line. Since only the degree of linear polarisation is of interest here, we use the absolute value of the Stokes QQ parameter.

Figure 8. Synthesised scattered spectra in the Fe Heα and Lyα bands in the IscaI_{\mathrm{sca}} and ∣Qsca∣|Q_{\mathrm{sca}}| Stokes parameters for (a, b) a completely linearly polarised incident source and (c, d) a completely unpolarised incident source. The spectra are shown for ϕ=π/2\phi= \pi/2 and θ=0∘\theta= 0^\circ (red), 30∘30^\circ (green), 60∘60^\circ (cyan), and 90∘90^\circ (purple). The observer’s reference direction is chosen to lie in the yy–zz plane. For display purposes, the spectra are convolved with a Gaussian of 5 eV FWHM and rebinned to 0.5 eV, comparable to the spectral resolution of XRISM. The vertical dashed lines mark the rest-frame line energies.

Figure 9. Normalised scattered intensities (IscaI_{\mathrm{sca}}) and polarisation degrees (∣Qsca∣/Isca\lvert Q_{\mathrm{sca}}\rvert/I_{\mathrm{sca}}) as a function of the polar angle (θ\theta) for a fixed azimuthal angle of ϕ=π/2\phi= \pi/2, shown in the same panel layout as Figure 8. The SKIRT results (curves) are compared with the analytical predictions of single scattering based on Eq. (10) (points) for the Heα\alpha ww, Lyα1\alpha_1, and Lyα2\alpha_2 lines.

In Figs. 8 and 9, panels (a) correspond to the existing laboratory experiment of Rudolph et al. [42]. Panels (b) illustrate a possible future laboratory experiment equipped with a polarisation-sensitive detector. Panels (c) represent the case observable with XRISM, while panels (d) show the corresponding results expected from a future mission combining the spectral resolution of XRISM with the linear polarimetry capability of IXPE (Weisskopf et al. [52]).

Polarised incident source (panels (a) and (b)) In the Heα\alpha complex, the ww and yy lines are strongly polarised, reaching ∣Qsca∣/Isca≃1|Q_{\mathrm{sca}|}/I_{\mathrm{sca}} \simeq1 over most scattering angles. This reflects their purely dipole scattering nature and is consistent with the laboratory measurements shown in Fig. 3 of Rudolph et al. [42]. In Fig. 9 (b), the polarisation degree decreases around θ=90∘\theta= 90^\circ. This is because the scattered intensity is nearly zero towards this direction, thus multiple scattering becomes more important which partially depolarises the scattered radiation.

In the Lyα\alpha complex, the Lyα1\alpha_1 line exhibits a smaller polarisation degree ∣Qsca∣/Isca|Q_{\mathrm{sca}}|/I_{\mathrm{sca}} than the Heα\alpha ww line (Fig. 9 (b)) because its resonance scattering consists of equal dipole and monopole components. The isotropic component is clearly visible in IscaI_{\mathrm{sca}} at θ=90∘\theta= 90^\circ, where the dipole contribution vanishes (Fig. 8 (a′)). By contrast, the Lyα2\alpha_2 line remains completely unpolarised (∣Qsca∣=0|Q_{\mathrm{sca}}| = 0), reflecting its purely monopole scattering.

The experiment of Rudolph et al. [42] did not cover the Lyα\alpha energy range. However, the Li-like qq (2s 2S1/2→1s 2s 2p 2P3/22s\,^2S_{1/2} \rightarrow1s\,2s\,2p\,^2P_{3/2}) and rr (2s 2S1/2→1s 2s 2p 2P1/22s\,^2S_{1/2} \rightarrow1s\,2s\,2p\,^2P_{1/2}) lines have the same (E1,E2)(E_1,E_2) coefficients as Lyα1\alpha_1 and Lyα2\alpha_2, respectively, and exhibit the same angular dependence predicted here. These Li-like inner-shell transitions will be incorporated into SKIRT in a future paper.

Unpolarised incident source (panels (c) and (d)) An unpolarised incident beam can be regarded as an incoherent superposition of two orthogonal linearly polarised components with equal intensity. The scattered radiation is therefore the sum of the spectra obtained for incident polarisation vectors parallel to the xx and yy axes. Even when the detector is insensitive to polarisation (panel (c)), the different scattering phase functions produce observable line-to-line differences. These differences become even more pronounced with a polarisation-sensitive detector (panel (d)).

Unlike the polarised case, the xx and zz lines are also present in the Heα\alpha complex in Figure 8 (c, d). This is because the incident radiation is assumed to be a continuum, which contains photons energetic enough to ionise He-like and Li-like ions, thereby producing these lines through the RR and II channels. Together with the Lyα2\alpha_2 line, the xx and zz lines undergo purely monopole scattering and therefore show no angular dependence on θ\theta.

The scattered intensity IscaI_{\mathrm{sca}} of the ww and Lyα1\alpha_1 lines decreases with increasing scattering angle (Figure 9 (c)), although less strongly than for the polarised incident beam (Figure 9 (a)). This weaker angular dependence arises because the two orthogonal incident polarisation components contribute equally, partially averaging out the anisotropy. The contribution from the RR channel due to the continuous incident spectrum causes IscaI_{\mathrm{sca}} to slightly exceed the analytical result.

The polarisation degree exhibits the opposite angular behaviour to that of the polarised-source case. At θ=0∘\theta= 0^\circ, two incident polarisation components orthogonal to each other are scattered equally into the line of sight, resulting in zero net linear polarisation. At θ=90∘\theta= 90^\circ, however, the component polarised parallel to the scattering plane is suppressed, so the scattered radiation is dominated by its orthogonal component. This produces a strong negative Stokes parameter (Qsca<0Q_{\mathrm{sca}} < 0), corresponding to a high degree of linear polarisation.

Discussion

Together with our previous work (Sameshima et al. [43]), SKIRT now supports the K-series (n⟶1n \longrightarrow1) lines of both H-like and He-like ions, covering the majority of prominent X-ray emission and absorption lines observed around compact objects. This extension enables detailed modelling of the resolved line profiles observed with XRISM and expected with NewAthena (Cruise et al. [15]), providing a new tool to investigate the three-dimensional kinematics of photoionised plasmas. We also demonstrated that the implementation is applicable to laboratory plasma experiments. Nevertheless, the current implementation has several important limitations. We do not provide generic quantitative limits of applicability here, since these depend on the specific use case. The applicability can be evaluated taking into account the physical processes omitted from the present implementation, which we describe below.

First, the code does not solve for the ionisation balance or electron temperature. Instead, the densities of the relevant ions and the electron temperature in each spatial cell are supplied externally, typically from 1D photoionisation codes such as SPEX (Kaastra et al. [25]), Cloudy (Gunasekera et al. 2025), or XSTAR (Ko & Kallman 1994), and mapped onto the 3D geometry. We also assume that nearly all He-like ions reside in the ground level. This approximation is well justified under the conditions considered here (Figure 3 (d)), but the overall calculation is therefore not fully self-consistent.

Second, the present implementation is intended only for photoionised plasmas and is not directly applicable to plasmas in collisional ionisation equilibrium (CIE). In CIE, level populations are governed primarily by collisional excitation and de-excitation, and processes such as dielectronic capture and autoionisation become much more important. Extending the framework to CIE would therefore require substantial modifications. Nevertheless, some aspects of the implementation, such as resonance scattering and the resulting line-profile formation, remain applicable irrespective of the ionisation mechanism.

Third, we neglect transitions among excited levels. The relative intensities of the xx, yy, and zz lines in the Heα\alpha complex provide a useful diagnostic of the local electron density ([19]) or UV radiation field ([39]), but this is not supported in the present implementation. The intensities of these lines are modified by the collisional or radiative excitation from zˉ\bar{z} to xˉ\bar{x} or yˉ\bar{y}. The collisional excitation becomes important at high densities; for example, the critical density is 6.7×108 cm−36.7 \times10^{8}\,\mathrm{cm}^{-3} for C v and 4.7×1016 cm−34.7 \times10^{16}\,\mathrm{cm}^{-3} for Fe xxv ([7]). The radiative excitation becomes important in intense UV radiation fields, such as those near O-type stars ([41]) for low-Z elements and the neutron star surface ([34]) for high-Z elements including Fe. At line optical depths higher than those verified in Sect. 4.1 (τ0∼10−1\tau_{0} \sim10^{-1}–10310^{3}), the cumulative effects of these neglected transitions may become non-negligible over repeated scatterings. However, the inclusion of the transitions among excited levels would require significant changes to the formalism of the present work and is left for the future.

Fourth, satellite lines from lower ionisation stages are not included. These lines often blend with the He-like K-series lines ([18]) and cause the resonant Auger destruction (RAD), in which xx and yy line photons are resonantly absorbed through the 1s2 2s→1s 2s 2p1\mathrm{s}^{2}\,2\mathrm{s} \to1\mathrm{s}\,2\mathrm{s}\,2\mathrm{p} transition and subsequently destroyed by Auger decay ([30, 12]). This process will be addressed in our next implementation of Li-like and lower ionisation stages.

Finally, additional high-density effects, such as continuum lowering, suppression of dielectronic recombination, three-body recombination, and free-free heating ([26]), are not included in the present implementation. These processes can modify the ionisation balance, recombination rates, and thermal structure at sufficiently high densities; for example, dielectronic recombination can be substantially suppressed at ne∼1010n_{\mathrm{e}} \sim10^{10}–1015 cm−310^{15}\,\mathrm{cm}^{-3} for some ions, while three-body recombination becomes important at ne≳1018 cm−3n_{\mathrm{e}} \gtrsim10^{18}\,\mathrm{cm}^{-3}, and continuum lowering and free-free heating also become increasingly important at high densities depending on ion charge and radiation field ([26]).

Summary

We have presented the implementation, verification, and demonstration of the He-like K-series lines in the MCRT code SKIRT. This work represents another step towards a comprehensive MCRT treatment of ionic processes. Our main results are as follows:

  1. We implemented the atomic processes responsible for the formation of the He-like K-series lines—resonance scattering, radiative recombination, and inner-shell ionisation of Li-like ions—which contribute differently to the Heα\alpha ww, xx, yy, and zz lines.

  1. The implementation successfully reproduces key RT effects, including the distinct line-profile evolution of the Heα\alpha lines with optical depth and the formation of P Cygni profiles in outflowing gas. The results agree well with analytical solutions and the independent RT code Cloudy.

  1. We demonstrated the treatment of linear polarisation associated with resonance scattering, successfully reproducing the laboratory experiment of Rudolph et al. [42].

  1. These RT effects are now observable with XRISM but cannot be modelled adequately by conventional 1D RT codes, highlighting the importance of 3D MCRT calculations with ionic processes implemented in SKIRT.

Acknowledgements. We thank the anonymous reviewer for providing useful comments for improvement. N. S. acknowledges the hospitality of colleagues at Ghent University, ESAC, and SRON, where he stayed during the course of this work. This research made use of the JAXA high-performance computing system JSS3. N. S. acknowledges support from the JSPS Core-to-Core Program (grant number JPJSCCA20220002), the Foundation for Promotion of Astronomy, and JSPS KAKENHI Grant Number 26H02075. B. V. acknowledges support through the European Space Agency (ESA) Research Fellowship Programme in Space Science.

References

  1. [1]Badnell, N. R. 2006, ApJS, 167, 334
  2. [2]Baes, M. & Camps, P. 2015, Astron. Comput., 12, 33
  3. [3]Baes, M., Camps, P., & Matsumoto, K. 2022, A&A, 666, A101
  4. [4]Baes, M., Davies, J. I., Dejonghe, H., et al. 2003, MNRAS, 343, 1081
  5. [5]Baes, M., Gordon, K. D., Lunttila, T., et al. 2016, A&A, 590, A55
  6. [6]Baes, M., Verstappen, J., De Looze, I., et al. 2011, ApJS, 196, 22
  7. [7]Blumenthal, G. R., Drake, G. W. F., & Tucker, W. H. 1972, ApJ, 172, 205
  8. [8]Brandt, W. N. & Schulz, N. S. 2000, ApJ, 544, L123
  9. [9]Camps, P. & Baes, M. 2015, Astron. Comput., 9, 20
  10. [10]Camps, P. & Baes, M. 2020, Astron. Comput., 31, 100381
  11. [11]Camps, P., Behrens, C., Baes, M., Kapoor, A. U., & Grand, R. 2021, ApJ, 916, 39
  12. [12]Chakraborty, P., Ferland, G. J., Chatzikos, M., Guzmán, F., & Su, Y. 2020a, ApJ, 901, 68
  13. [13]Chakraborty, P., Ferland, G. J., Chatzikos, M., Guzmán, F., & Su, Y. 2020b, ApJ, 901, 69
  14. [15]Cruise, M., Guainazzi, M., Aird, J., et al. 2025, Nat Astron, 9, 36
  15. [16]Dijkstra, M., Haiman, Z., & Spaans, M. 2006, ApJ, 649, 14
  16. [17]Done, C., Gierliński, M., & Kubota, A. 2007, A&ARv, 15, 1
  17. [18]Gabriel, A. H. 1972, MNRAS, 160, 99
  18. [19]Gabriel, A. H. & Jordan, C. 1969, Mon Not R Astron Soc, 145, 241
  19. [21]Hamilton, D. R. 1947, ApJ, 106, 457
  20. [22]Harrington, J. P. 1973, MNRAS, 162, 43
  21. [23]Hummer, D. G. 1962, MNRAS, 125, 21
  22. [24]Jeffery, D. J. & Branch, D. 1990, in Jerusalem Winter School for Theoretical Physics, Vol. 6 (Singapore: World Scientific), 149
  23. [25]Kaastra, J. S., Raassen, A. J. J., de Plaa, J., & Gu, L. 2024, SPEX X-Ray Spectral Fitting Package, Zenodo
  24. [26]Kallman, T., Bautista, M., Deprince, J., et al. 2021, ApJ, 908, 94
  25. [28]Mao, J. & Kaastra, J. 2016, A&A, 587, A84
  26. [29]Matsumoto, K., Camps, P., Baes, M., et al. 2023, A&A, 678, A175
  27. [30]Mehdipour, M., Kaastra, J. S., & Raassen, A. J. J. 2015, A&A, 579, A87
  28. [31]Mewe, R. 1999, in X-Ray Spectrosc. Astrophys., ed. J. van Paradijs & J. A. M. Bleeker (Berlin, Heidelberg: Springer), 109–187
  29. [32]Miller, J. M., Gu, L., Raymond, J., et al. 2025, ApJL, 995, L14
  30. [34]Mochizuki, Y., Tsujimoto, M., Leutenegger, M. A., et al. 2025, PASJ, 77, S63
  31. [35]Neufeld, D. A. 1990, ApJ, 350, 216
  32. [37]Osterbrock, D. E. & Ferland, G. J. 2006, Astrophys. Gaseous Nebul. Act. Galact. Nucl.
  33. [38]Palmeri, P., Mendoza, C., Kallman, T. R., & Bautista, M. A. 2003, A&A, 403, 1175
  34. [39]Porter, R. L. & Ferland, G. J. 2007, ApJ, 664, 586
  35. [40]Proga, D. & Kallman, T. R. 2002, ApJ, 565, 455
  36. [41]Rodes-Roca, J. J., Torrejón, J. M., Sanjurjo-Ferrín, G., & Villalva, J. P. 2026, A&A, 708, A113
  37. [42]Rudolph, K. J., Bernitt, S., Epp, S. W., et al. 2013, Phys. Rev. Lett., 111, 103002
  38. [43]Sameshima, N., Lauwers, A., Meulen, B. V., et al. 2026, A&A, 714, A112
  39. [44]Steinacker, J., Baes, M., & Gordon, K. D. 2013, ARA&A, 51, 63
  40. [45]Tarter, C. B. & McKee, C. F. 1973, ApJ, 186, L63
  41. [46]Tashiro, M., Kelley, R., Watanabe, S., et al. 2025, PASJ, 77, S1
  42. [47]Thomas, R. C., Nugent, P. E., & Meza, J. C. 2011, PASP, 123, 237
  43. [49]Vander Meulen, B., Camps, P., Stalevski, M., & Baes, M. 2023, A&A, 674, A123
  44. [50]Vander Meulen, B., Camps, P., Tsujimoto, M., & Wada, K. 2024, A&A, 688, L33
  45. [51]Verner, D. A. & Yakovlev, D. G. 1995, A&AS, 109, 125
  46. [52]Weisskopf, M. C., Soffitta, P., Baldini, L., et al. 2022, JATIS, 8, 026002
  47. [55]XRISM Collaboration, Ballhausen, R., Bamba, A., et al. 2025b, Nature, 646, 57

Paper details

vlnc:W_8rker85w
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 6

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents