WorksPhysics and Astronomy
What constrains the neutron-star crust? Present data, future measurements, and EOS doppelgängers
Abstract
The neutron-star crust plays a central role in pulsar glitches, thermal evolution, and stellar oscillations, yet its properties remain difficult to constrain. We use Bayesian inference with a unified crust-core equation of state to assess what present nuclear and astrophysical data tell us about the crust and what future stellar measurements can add. Within this model, present crust constraints are dominated by chiral effective field theory, with laboratory data providing additional information and current stellar observations having a smaller effect. The adopted theoretical bands determine how tightly the crust properties are constrained, while the treatment of neutron-rich surface energy affects their inferred values. Forecasts centred on a single reference equation of state show that more precise measurements of radius, tidal deformability, and total moment of inertia mainly constrain crust thickness. They provide little additional information about the crust-core transition, crust mass, or crustal moment of inertia and do not recover the precision lost when the chiral effective field theory constraint is removed. Two models with nearly identical global stellar observables can have crust masses and crustal moments of inertia differing by about a factor of two, yet remain indistinguishable at the assumed precision. Precise global measurements therefore need not uniquely determine the crust. Observations that directly probe the crust are needed to distinguish these models.
Introduction
The neutron-star (NS) crust contains only a small fraction of the stellar mass and radius, yet it substantially influences a wide range of observational phenomena. Its properties are central to models of pulsar glitches [2, 45, 3, 13], cooling of transiently accreting stars [7, 55], magnetar oscillations and crust failure [39, 74, 34, 58], pre-merger crust shattering, and the ejection of neutron-rich matter [77, 29]. Thermal and magnetic transport through the crust also helps set the observed X-ray surface temperature [14, 28]. Despite its importance for NS observables, the composition, microscopic structure, and extent of the crust remain difficult to constrain. Although laboratory nuclei constrain matter at sub-saturation densities, the extreme neutron excess, nuclear lattice, and unbound neutrons of the inner crust remain difficult to study experimentally and theoretically [14]. Most observational signals sensitive to the crust do not isolate its contribution. Their interpretation depends on its coupling to the core, superfluid components, magnetic field, and thermal structure [14, 3, 13, 55].
Over the past decade, nuclear theory, laboratory experiments, and multimessenger observations have substantially improved our knowledge of the NS equation of state (EOS) [23, 4, 61, 56, 37, 76]. Nuclear masses and neutron skins probe neutron-rich matter below saturation density, microscopic many-body calculations constrain matter up to about saturation density, and heavy-ion collisions extend the laboratory reach to higher densities. Mass measurements of massive pulsars, mass–radius measurements from the Neutron Star Interior Composition Explorer (NICER), and tidal information from binary mergers provide complementary constraints on cold matter in NS cores. These inputs have been combined in a wide range of EOS studies based on different descriptions of dense matter and assumptions about its composition and phase structure [26, 4, 76, 37]. Many such studies focus on the core and attach a standard crust EOS to each sampled core EOS. This approximation has little effect on the maximum mass and only a modest effect on other global properties. It can nevertheless change stellar radii at the few-percent level, especially at low mass, and produce much larger errors in the crust thickness [26, 25, 57]. A consistent crust–core description is particularly important for estimating the radii of low-mass neutron stars and the relation between their baryonic and gravitational masses [59].
A fixed crust may therefore be adequate for many studies of the core EOS, but it cannot be used to determine what constrains the crust itself. The crust–core transition is set below saturation density by the competition between the bulk energy of neutron-rich matter and the surface and Coulomb energies of nuclear clusters. To leading order, the transition pressure sets the crust mass and crustal moment of inertia, while the difference in baryon chemical potential between the stellar surface and the crust–core boundary determines the crust thickness (Carreau et al. 2019a,b; Newton et al. 2022). At the same time, these stellar crust properties depend on the mass, radius, and therefore the EOS of the whole star. A crust calculation must consequently be embedded in a complete crust–core EOS, on which nuclear and astrophysical constraints act together. Moreover, the part of the EOS tested by a global observable depends on the stellar mass. Weih et al. [80], for example, showed that measurements at different masses do not constrain the same density region, and that intermediate-mass stars can provide greater leverage on the lower-density EOS than the most massive stars.
Several Bayesian studies have treated the crust and core consistently or have focused specifically on crust properties (Carreau et al. 2019a,b; Balliet et al. 2021; Dinh Thi et al. 2021; Newton et al. 2022; Scurto et al. 2024; Burrello et al. 2025; Parmar & Bombaci 2026a). These studies show that microscopic neutron-matter calculations and the poorly known surface energy of very neutron-rich clusters strongly affect the crust–core transition [10 b]. Nuclear masses, neutron-skin measurements, and finite-size terms further constrain the transition and the pasta layers [6, 21, 53]. However, the relative contributions of individual nuclear and astrophysical constraints, and the extent to which future stellar measurements can replace low-density nuclear information, remain less systematically explored.
Here, we address these questions using Bayesian inference within a unified crust–core model. We compare combinations of present constraints, variations in the nuclear model, and forecasts across stellar masses and measurement precisions. We trace how the inferred crust–core transition, crust thickness, crust mass, and crustal moment of inertia respond when individual nuclear and astrophysical constraints are removed. We focus in particular on chiral effective field theory (χEFT) because previous Bayesian studies have found microscopic neutron-matter calculations to be among the strongest constraints on the crust–core transition and related crust properties (Carreau et al. 2019a,b; Newton et al. 2022; Burrello et al. 2025). We then examine whether precise measurements of radius, tidal deformability, and total moment of inertia can provide comparable information across different stellar masses. Finally, we test whether precise global measurements can distinguish different crusts. We identify two unified EOSs with almost identical radii, tidal deformabilities, and maximum masses, but with well-separated crust properties. We then generate mock radius, tidal deformability, and moment-of-inertia measurements from each EOS, using the same uncertainties, and infer the crust in the full model. These “crust dopplegängers” extend the EOS-degeneracy studies of Raithel & Most (2023a,b) to the crust itself.
Unified crust and core model
We describe the inner crust with the compressible liquid-drop model (CLDM) [10 b]. In the CLDM, matter is described within a spherical Wigner–Seitz cell containing a neutron-rich nuclear cluster, electrons, and unbound neutrons. At each mean density, the equilibrium composition is found by minimizing the total energy, including bulk, surface, curvature, and Coulomb contributions. The competition between these contributions determines whether clustered or uniform matter is favoured and thus sets the crust–core transition. For the outer crust, we use experimental nuclear masses where available. In the deeper layers, where increasing neutron-rich nuclei appear and measured masses are unavailable, we use the HFB-24 mass model [30]. We keep this outer-crust EOS fixed for all sampled EOSs.
The bulk energies of the cluster, neutron gas, and uniform core are supplied by the empirical metamodel of Margueron et al. [46]. The interaction contribution to the energy per baryon is expanded to fourth order around saturation density. A low-density correction ensures that the energy per baryon vanishes at zero density. The parameter vector contains thirteen empirical parameters,
Here, is the saturation density of symmetric nuclear matter, and is its energy per baryon at saturation. The coefficients , , and are the incompressibility, skewness, and kurtosis parameters, respectively, and characterize the second-, third-, and fourth-order density dependence of the energy per baryon around . In the isovector sector, is the symmetry energy at saturation, while , , , and are its slope, curvature, skewness, and kurtosis parameters, respectively, evaluated at . The ratio is the nucleon effective mass in symmetric matter at saturation divided by the bare nucleon mass . The dimensionless splitting is evaluated in pure-neutron matter at saturation, where and are the neutron and proton effective masses. These two parameters control the momentum-dependent kinetic energy, while the dimensionless parameter controls the low-density correction. In benchmarks against existing nuclear models, Margueron et al. [46] showed that the fourth-order metamodel can reproduce a broad range of smooth nucleonic EOSs when its high-order coefficients are adjusted to their density dependence. Bayesian calculations with relativistic mean-field models and nonrelativistic metamodels have yielded similar crust-property distributions when low-density nuclear constraints are included [73, 57]. We use the metamodel here because its computational efficiency makes the repeated inference across constraint combinations, model variants, and forecast scenarios practical. The independent uniform priors adopted for these parameters are listed in Table B.1 of Appendix § 8.§ 1.
For each sampled EOS, the surface and curvature coefficients are fitted anew to the masses from the 2020 Atomic Mass Evaluation (AME2020) [79]. This keeps the surface and bulk contributions consistent for each EOS. We adopt the surface-tension parametrization introduced by Ravenhall et al. [64]. It is given in Eq. (A.4) of Appendix § 7, where the exponent controls the extrapolation to small proton fractions. We adopt , a commonly used reference choice in liquid-drop crust models [52, 10, 32]. This choice reproduces dynamical-spinodal transition densities reasonably well for several nuclear interactions [10]. Comparisons with extended Thomas–Fermi calculations also favour values close to three, although the preferred value depends on the nuclear interaction and treatment of the surface [32]. We therefore repeat the calculation with and to assess this model dependence.
The nonuniform crust and uniform core use the same nuclear interaction. The crust–core transition occurs where uniform matter becomes energetically favoured over the optimized nuclear configuration. We retain only EOSs that are stable, thermodynamically consistent, and causal. A one-sided mass constraint suppresses EOSs whose maximum mass falls below , where is the solar mass (Appendix B). We collect the five crust quantities studied here in the vector ,
where and are the baryon density and pressure at the crust–core transition. The crust thickness is , and its gravitational mass is , where and are the stellar gravitational mass and radius, and and are their values at the transition. The ratio is the crustal contribution to the total stellar moment of inertia . These three stellar crust quantities depend on . We evaluate them at unless stated otherwise. Mass arguments such as (1.4) denote stellar masses in units of . These quantities describe the crust–core boundary and the crust contributions to the stellar radius, mass, and moment of inertia. The metamodel expansion and CLDM energy contributions are summarized in Appendix A. The priors and likelihoods are listed in Appendix B.
Present constraints and forecast construction
Present nuclear and astrophysical constraints
The present constraints comprise nuclear-matter calculations, laboratory measurements, and neutron-star observations, which probe different density ranges and EOS properties. The combined likelihood is written as
The physical filter enforces thermodynamic consistency, stability, positive symmetry energy, and causality throughout the unified EOS. The saturation term constrains the saturation density, energy per baryon, and incompressibility of symmetric nuclear matter [8, 12, 40, 68, 46]. Additional laboratory constraints at finite density enter through and constrain the symmetry energy, its density dependence, and the pressure of symmetric matter. These inputs are drawn from the experimental compilation of Tsang et al. [76]. The individual measurements and their original sources are listed in Table B.2.
The low-density EOS is constrained by calculations of symmetric and pure-neutron matter between 0.02 and 0.20 [22, 33]. This interval covers densities relevant to the inner crust and the transition to uniform matter, making the principal microscopic constraint in this regime. The factor assigns equal weight to EOSs whose energies lie within the bands at the evaluated densities in this interval and rejects those outside. In the reference calculation, the band boundaries are widened by 5%. Sensitivity to this band-widening prescription is assessed using the original bands and widenings of 10% and 20%. A separate assessment of regulator-cutoff dependence and order-by-order truncation uncertainties is beyond the scope of this work [see 31 for a quantified truncation-error treatment]. The percentage widenings mimic a broader theoretical uncertainty band and test its effect on the inferred crust properties, but do not provide a statistical estimate of these uncertainties. Calculations without the constraint assess the independent constraining power of laboratory and stellar data.
The astrophysical factors constrain the global stellar structure. The term constrains the maximum supported gravitational mass through a smooth penalty below , motivated by the observed massive neutron stars [5, 18]. The NICER term includes the mass–radius constraints for PSRs J0030+0451 [66], J0437−4715 [15], J0614−3320 [49], and J0740+6620 [67]. For each source, the measured mass–radius distribution is evaluated along the predicted curve, retaining the uncertainty in stellar mass. The GW170817 term uses the dimensionless binary tidal deformability inferred by Abbott et al. [1], with the chirp mass fixed and the mass ratio marginalized. This quantity combines the individual dimensionless tidal deformabilities according to Eq. (B.5). The adopted constraints, their sources, and the likelihood definitions are given in Appendix B.1.
Forecasts of future measurements
Measurements of stellar radius, tidal deformability, and moment of inertia probe the EOS through the global structure of the star. We assess how much improved measurements of these observables can reduce crust uncertainties beyond the present constraints, and whether this information depends on the low-density input.
We construct mock measurements using a single reference EOS, , selected from the full present-data posterior near the nuclear-parameter medians. For each observable and stellar mass, we take this EOS prediction as the central measured value and assign the uncertainty specified below. For example, a 2% radius forecast is centred on the predicted radius and has a standard deviation equal to 2% of that value. We then combine the mock measurements with the present constraints to infer the crust properties.
The central values are not randomly displaced by measurement noise. These zero-noise, or Asimov, data [16] allow comparisons of measurement precision and combinations of observables for the same assumed underlying EOS. The forecast gains are conditional on this reference EOS and are not averaged over all EOSs allowed by present data. Systematic errors from instrument calibration or from approximations in the gravitational-wave models used to infer tidal deformability are not included. Appendix B.2 gives further details.
The radius forecasts span 1.2–1.8 in steps of 0.2 , with 2% uncertainties in both mass and radius, following the precision benchmark used by Huang et al. [36] for future X-ray measurements. Adopting the same fractional precision at each mass isolates the mass dependence of the constraints. We label a binary forecast by , with the component masses in solar units. Tidal forecasts assume a 10% uncertainty for equal-mass binaries with component masses of 1.2, 1.4, and 1.6 . We also test 5% and 20% uncertainties for the 1.4 + 1.4 binary. These precisions are motivated by prospects for next-generation gravitational-wave detectors [38], but serve as benchmarks rather than predictions for a specific event. For the moment of inertia of PSR J0737−3039A, with mass 1.338 , we adopt the 10% precision considered by Lim et al. [43] and a more optimistic 5% case. Combined forecasts test the complementarity of the three observables. The “realistic combined” case uses a 2% mass–radius measurement at 1.8 , a 10% tidal measurement for a 1.4 + 1.4 binary, and a 10% measurement of . The “multi-star combined” case replaces the single mass–radius measurement with five at 1.2, 1.4, 1.6, 1.8, and 2.0 , each at the same 2% precision. We also consider these five mass–radius measurements alone.
Selected forecasts are repeated without the EFT constraint, keeping the reference EOS and forecast measurements fixed. This comparison isolates the information supplied by future observations independently of the low-density EFT input.
Statistical analysis
For each crust quantity , we denote its weighted posterior ath percentile by and use it to define the central widths and . Present-data comparisons use , with values above unity indicating broader intervals. Forecasts use the inverse ratio,
Values of above unity indicate narrower credible intervals, while values below unity indicate broader intervals relative to the reference case. The geometric mean, , summarizes the width changes across the five crust quantities. Changes in posterior location and shape are additionally quantified by the marginal Kullback–Leibler divergence (Kullback & Leibler [42]),
Here and are the normalized marginal posterior densities for the case and reference calculations. The base-two logarithm expresses in bits. It is zero for identical distributions and positive otherwise. It is not symmetric under exchange of the two distributions and is not a detection significance.
For forecasts without EFT, we also define
Here measures narrowing relative to the present-data posterior without EFT. The ratios and compare the resulting width with the full present-data posterior and the corresponding EFT-conditioned forecast, respectively. Unity therefore indicates recovery of the present precision for , or equal forecast widths with and without EFT for .
Finally, we select pairs from the full present-data posterior with similar , , and maximum mass but different crust properties. Moment of inertia is excluded from the selection to retain it as an independent test. Forecast recoveries centred on each member test whether future observations can distinguish these crusts. This crust-doppelgänger test is motivated by the analysis of Raithel & Most (2023a,b). The selection and recovery criteria are defined in Sect. 5.5, with supporting details in Appendix C.
These tests measure distinguishability at the assumed precision in observable space. Detector-specific claims would additionally require waveform and noise modeling, source populations, and selection effects ([35, 54, 38]).
Results and discussion
Present constraints on crust properties
We compare thirteen configurations of the constraints and nuclear model to assess how nuclear and stellar data constrain the crust. The physical baseline includes the admissibility conditions and the lower bound on maximum mass. The nuclear-only case adds saturation, laboratory, and EFT constraints, while the astrophysical-only case adds NICER and GW170817. Figure 1 shows the corresponding distributions of the five crust quantities. With all present constraints included, their medians and central 68% credible intervals are
Figure 1. Present constraints on the five crust quantities. The first group of rows compares the physical baseline with the nuclear-only, astrophysical-only, and full present-data calculations. The remaining groups show the effects of removing individual constraints, varying the EFT envelope, and changing the surface exponent. The shaded shapes show marginalized probability densities. Thin and thick horizontal segments mark the central 90% and 68% credible intervals, respectively. Open circles mark the medians.
Table D.1 also lists the nuclear-parameter posteriors and the central 90% intervals. These intervals describe the uncertainty within the adopted nuclear model and constraints. Nuclear constraints dominate the present inference: relative to the physical baseline, laboratory data together with EFT give width ratios of 0.318–0.365. Including stellar observations gives ratios of 0.305–0.436. Stellar data alone narrow only the crust thickness, to 0.888 times its baseline width. The other four central intervals become broader as the posterior shapes change. Without nuclear information, current stellar observations therefore provide limited constraints on the transition, crust mass, and crustal moment of inertia.
Figure 2 summarizes the changes in widths and medians. Without EFT, the five widths increase by factors of 2.08–2.96, because a wider range of neutron-rich matter properties is then allowed near the crust–core transition. Removing both saturation and finite-density laboratory constraints increases them by factors of 1.11–1.27, whereas omitting NICER or GW170817 gives most width ratios between 0.95 and 1.05. Some transition intervals become narrower without NICER because removing NICER changes the shape of the posterior. This change does not by itself indicate a stronger constraint. The inferred precision is also sensitive to the adopted EFT band width. Relative to the reference 5% widening, the original band gives width ratios of 0.42–0.78. Widenings of 10% and 20% give ratios of 1.22–1.38 and 1.49–1.97, respectively, with smaller changes in the medians.
Figure 2. Sensitivity of inferred crust properties to present constraints and nuclear modelling. All cases are compared with the full present-data calculation (“All present”), which uses a 5% EFT-band widening and . Left: ratio of the central 68% credible-interval width to its reference value. Numbers give the ratios, while colours show their base-two logarithms. Red indicates broader intervals and blue narrower intervals. A value of unity indicates no change in width. Right: change in the median divided by the reference 68% width. Positive (red) and negative (blue) values indicate shifts to higher and lower values, respectively. The first group of rows compares the physical, nuclear, and astrophysical constraints. The remaining groups show the effects of omitting individual inputs, varying the EFT-band widening, and changing the surface exponent . Crust thickness, mass, and fractional moment of inertia are evaluated at 1.4 .
Changing the neutron-rich surface energy shifts the inferred crust properties while leaving their credible widths nearly unchanged. Relative to , setting lowers the medians by 0.32–0.52 reference widths, while raises them by 0.17–0.32 widths. The separation between the two choices reaches 0.49–0.84 reference widths, although the central 68% width ratios remain close to unity (Table D.2). This sensitivity to the neutron-rich surface energy is consistent with earlier crust calculations. Newton et al. [52] showed that the surface energy at small proton fractions strongly affects the inner-crust composition and transition density. Carreau et al. [10] subsequently found that increasing raises both the transition density and pressure, as in our results, and that uncertainty in broadens their inferred ranges. The importance of treating the surface and bulk contributions consistently was also demonstrated by Dinh Thi et al. [21]. The shifts between surface prescriptions are a substantial fraction of the present uncertainty, which is not captured by the intervals at fixed . The three choices of test this sensitivity without providing a full uncertainty estimate for the surface functional. Joint inference of bulk and surface parameters offers a way to include this additional uncertainty ([41]).
The same trends are seen across stellar masses from 1.0 to 2.0 , as shown in Figure 3. The corresponding crust properties are listed in Table D.3. Over this mass range, removing EFT increases the widths by factors of 1.81–3.14, while removing laboratory constraints gives factors of 1.08–1.30. The width ratios remain close to unity when NICER or GW170817 is omitted (about 0.93–1.07) or the surface model is changed (about 0.92–1.08).
Figure 3. Mass dependence of the central 68% widths for crust thickness (top), crust mass (middle), and fractional crustal moment of inertia (bottom). Each curve is divided by the full present-data width at the same stellar mass. The columns show the information build-up, leave-one-out tests, EFT-envelope changes, and surface-energy models over 1.0–2.0 .
The inferred transition agrees with earlier unified calculations. Carreau et al. [10] obtained and , while Newton et al. [53] found from neutron skins and EFT neutron matter. Burrello et al. [9] obtained , while Göttling et al. [31] found 0.062–0.088 . These studies use different surface models and treatments of theoretical uncertainty. They nevertheless favour a similar transition-density range, while their pressure estimates vary more. The leading contribution from low-density theory and the additional constraint from laboratory data are also consistent with previous work ([10, 53, 9]). Within the adopted unified model, the inferred crust properties are mainly constrained by nuclear information and remain only weakly sensitive to the inclusion of current NICER and GW170817 data.
Constraints from future stellar measurements
We first examine the improvement obtained by adding each forecast measurement individually to the full present-data constraints, using the scenarios defined in Sect. 3.2.
Crust thickness shows the largest improvement among the five crust quantities. Its strongest constraint comes from the optimistic 5% measurement of the binary tidal deformability for a 1.4 + 1.4 system, which reduces the central 68% credible-interval width by about 21%. Table D.4 lists the width gains and information gains for all forecast cases. In Figure 4, individual 2% mass–radius measurements give thickness gains of 1.09–1.12. The other width ratios remain within about 0.96–1.04, apart from a gain of 1.05 in at 1.2 . The geometric-mean gain is 1.00–1.01, with no clear advantage for any mass between 1.2 and 1.8 .
Figure 4. Change in the central 68% width after each idealized future measurement. The first fourteen rows show forecasts that retain , with . The last four rows show forecasts without . In each of these cells, the upper number is and the lower number is . Blue cells indicate narrower intervals and red cells broader intervals. In the last four rows, the colour represents only. The final column is the geometric mean over the five crust quantities.
For the 1.4 + 1.4 binary, relaxing the tidal uncertainty from 5% to 10% and 20% reduces the thickness gain from 1.27 to 1.17 and 1.06, respectively. The latter two correspond to width reductions of about 15% and 6%. The other four width ratios remain within about 0.97–1.03. At fixed 10% tidal uncertainty, the thickness gain increases from 1.15 for the low-mass binary to 1.21 for the high-mass binary. The latter broadens both transition intervals (gains of 0.93 and 0.91), giving a geometric-mean gain of 0.99, compared with 1.04 for the low-mass binary. A 5% moment-of-inertia measurement gives a thickness gain of 1.09. The 10% forecast leaves the widths nearly unchanged.
Across the fourteen forecasts, the median gain is 1.13 for thickness and lies between 0.98 and 1.02 for every other quantity. Of the fifteen gains that exceed 1.05 before rounding, thirteen are for thickness and two for transition density. All fifteen have central 95% bootstrap intervals for above unity. None concerns , , or . The limited effect on the marginals is also reflected in the Kullback–Leibler divergence, which compares the one-dimensional marginal posterior distributions. Its largest value among the 70 forecast comparisons is 0.16 bits.
Correlations between global observables and crust properties can help interpret these results. In the present-data posterior, we find that the strongest Spearman rank-correlation coefficient between a global observable and crust thickness reaches , for and . The corresponding maximum absolute correlations with , , , and are 0.40, 0.42, 0.37, and 0.34, respectively. Among the nuclear parameters, correlates most strongly with and ( and ), while has the strongest correlation with the three stellar-crust quantities (–0.67). These correlations are consistent with the stronger forecast constraints on crust thickness.
Table 1 compares the best forecast for each quantity with the changes caused by the nuclear model. Only thickness reaches a gain above 1.20. The best gain for is 1.11, and the others do not exceed 1.04. Relative to these forecast widths, removing EFT gives intervals 2.58–3.01 times as wide, while the difference between surface models is 0.62–0.84 widths. The forecast improvement is therefore smaller than the sensitivity to the low-density nuclear description.
| Target | Best future case | [bits] | |||
| multi-star combined | 1.11 | 0.080 | 0.78 | 2.58 | |
| five , 2% | 1.04 | 0.022 | 0.76 | 3.01 | |
| , 5% | 1.27 | 0.124 | 0.62 | 2.65 | |
| five , 2% | 1.03 | 0.064 | 0.83 | 2.98 | |
| five , 2% | 1.01 | 0.050 | 0.84 | 2.99 |
Table 1. Forecast with the largest width contraction for each crust quantity.
Combined measurements and residual model dependence
To test whether combining measurements improves constraints on the other crust properties, we consider five mass–radius measurements, a single mass–radius measurement combined with tidal deformability and moment of inertia (the “realistic combined” case), and all five mass–radius measurements with the same tidal and inertia measurements (the “multi-star combined” case). The masses and uncertainties are specified in Sect. 3.2. Each combination is added to the full present-data constraints.
Comparisons at the same measurement precision show what each combination adds (Table D.4). The 10% tidal-only forecast for a 1.4 + 1.4 binary gives a thickness gain of 1.17. Adding the 2% mass–radius measurement at 1.8 and the 10% moment-of-inertia measurement raises this to 1.21. The width reduction relative to present data thus increases from about 15% to 17%, or an additional narrowing of about 3% relative to the tidal-only forecast. Compared with the radius-only and inertia-only forecasts at these same precisions, the combined thickness interval is about 8% and 18% narrower, respectively. For the other four crust quantities, the realistic combination gives gains of 0.94–1.00 relative to present data and does not produce a comparable improvement.
Combining five mass–radius measurements gives a thickness gain of 1.22, compared with 1.09–1.12 for the individual radius forecasts considered here. Adding the tidal and inertia measurements leaves this gain unchanged at the reported precision. The main additional improvement is in transition density, whose gain rises from 1.05 to 1.11, corresponding to about 5% further narrowing. The transition-pressure, crust-mass, and crustal-inertia intervals instead become about 2–3% wider. Relative to Notes. The gain is , and is measured relative to the full present-data posterior. The last two columns compare the forecast width with , the median separation between the two surface models, and with the present width obtained without EFT.
the realistic combination, the multi-star programme narrows the transition-density interval by about 15%, but the thickness interval by less than 1%. These comparisons show that combining observables does not substantially extend the improvement beyond crust thickness, apart from a modest gain in transition density. They also show that the five-radius programme already captures most of the thickness improvement in the combined forecast. The stronger constraint on thickness is consistent with its close relation to stellar radius and compactness, while the transition pressure, crust mass, and crustal moment of inertia remain more dependent on sub-saturation matter and surface physics.
Figure 5 shows representative posteriors. The reference crust lies within every central 90% interval, but below 69 of the 70 central 68% intervals. The reference values lie at the 7th–12th percentiles of the present posterior and at the 6th–17th percentiles after adding the forecast data. Although selected near the nuclear-parameter medians, the reference EOS has crust properties near the lower tail of the present posterior. The forecast measurements shift these distributions only slightly towards the reference values.
Figure 5. Representative forecasts for the five crust quantities. Selected single radius, tidal, and moment-of-inertia measurements are shown with the five-radius and combined programmes. Thin and thick segments mark the central 90% and 68% intervals, open circles mark the medians, and the dashed red line marks the crust properties of the reference EOS used to generate all mock measurements.
Forecasts without the EFT constraint
Removing EFT broadens the allowed low-density EOS range. Four of the forecasts are repeated with the same measurements but without EFT to test whether stellar data can recover the lost precision. The EFT constraint extends to 0.20 fm, covering both the crust and part of the uniform-matter regime. Removing it therefore tests the combined contribution of low-density nuclear theory, rather than isolating information about the crust alone. The comparison uses the width ratios defined in Eq. (5).
None of the 20 central 68% intervals narrows relative to the present-data calculation without : – (Figure 4). The full distributions remain close to those obtained before adding the forecast measurements, with bits. Using central 90% intervals also gives no narrowing. The wider intervals should not be interpreted as observations reducing the available information. They describe the response of this interval measure to measurements centred on the chosen reference EOS. We have not established whether the same behaviour persists for other reference EOSs.
| Forecast | |||||
| Five , 2% | 2.81 | 3.34 | 3.15 | 3.46 | 3.52 |
| , 5% | 2.67 | 3.06 | 2.76 | 3.13 | 3.22 |
| Realistic combined | 2.79 | 3.09 | 2.72 | 3.17 | 3.19 |
| Multi-star combined | 3.07 | 3.35 | 3.21 | 3.39 | 3.44 |
Table 2. Crust uncertainty in forecasts without and with .
Notes. Entries give the ratio of the central 68% width without to that with , (Eq. (5)). Both calculations include the same future measurements and all other present constraints. The stellar crust quantities are evaluated at .
Without , the forecast widths remain 2.17–3.50 times as wide as the current widths obtained with and 2.67–3.52 times as wide as the corresponding forecasts retaining $\chi_{\mathrm{EFT}} ({xref}Table 2`). Even a 5% tidal measurement leaves the thickness interval 2.17 times as wide as the current result. All central 90% intervals contain the reference crust.
Distinguishing crust doppelgängers
The doppelgänger test asks whether EOSs with similar global stellar properties can have distinguishable crusts.
We compare EOSs from the full present-data posterior that support all required global observables. We quantify their differences in global observables and crust properties with two dimensionless distances,
Here and contain the radii, tidal deformabilities, and maximum masses of the two EOSs. The covariance matrix accounts for their spread and correlations in the present posterior, and denotes transpose. The quantities and are their values of crust property , and is its posterior spread, defined in Appendix C. Small and large identify EOSs with similar global observables but different crusts. We select the pair with the largest subject to , obtaining and . Reducing the allowed global differences to still permits a crust distance of 7.24. Figure C.1 shows how the maximum crust separation varies with this limit.
At the masses used in the forecasts, the global observables differ by only
For an equal-mass binary, at the component mass. The crust properties nevertheless differ substantially (Table 3). Their separation ranges from 1.8 to 2.5 times the present central 68% width across the five crust quantities.
| Crust quantity | EOS | EOS | |
| [fm] | 0.07207 | 0.09956 | 1.80 |
| [MeV fm] | 0.2601 | 0.6285 | 2.51 |
| [km] | 0.8898 | 1.1197 | 1.84 |
| [] | 0.01467 | 0.03376 | 2.37 |
| 0.02157 | 0.04832 | 2.41 |
Table 3. Crust properties of the selected doppelgänger EOSs.
The measurements used to test this pair are listed in Table C.1. We express their separation through the dimensionless distance , which measures the difference between the two EOS predictions relative to the assumed measurement uncertainties, accounting for correlations between observables:
Notes. The stellar crust quantities are evaluated at . The final column gives the absolute difference between EOS and in units of the full present-data central 68% width, , for each quantity.
Here and are the predicted measurement vectors, and is the assumed covariance for measurement type . At the adopted uncertainties, these differences correspond to distances , , and . Combining independent measurements gives . Reaching would require reducing the mass–radius, tidal, and inertia uncertainties by factors of 40, 33, and 57, respectively, or by a factor of 23 when all three are combined. Table 4 also gives the factors for . These distances measure how well the adopted observations separate two fixed EOSs. They do not give a detector significance.
| Class | Adopted fractional uncertainty | |||
| Mass–radius | 2% in both and | 0.0248 | 40.3 | 120.8 |
| Tidal | 10% in | 0.0299 | 33.4 | 100.3 |
| Inertia | 10% in | 0.0176 | 56.8 | 170.4 |
| Combined | 2%, 10%, 10% | 0.0427 | 23.4 | 70.3 |
Table 4. Precision needed to separate the selected crust doppelgängers.
For mass and radius, a factor of 40 corresponds to reducing the uncertainty from 2% to about 0.05%, well below the 5% assumed in a representative STROBE-X forecast [65]. Extending the same fractional tidal precision to 2.0 raises the separation only to $\mathcal{D}=0.43. This is optimistic because tidal uncertainties are expected to increase at higher mass.
The small measurement distances already indicate that the selected EOSs cannot be distinguished at the adopted precision. The posterior recovers test whether this ambiguity persists when the remaining EOS parameters are allowed to vary.
Notes. is their distance at the adopted uncertainty, and is the factor by which every quoted standard deviation must decrease to reach a fixed-hypothesis distance . These detector-independent factors are not detection significances.
To compare the inferred crusts, we project their properties onto the scaled line joining and ,
where , , and are the values of crust quantity for EOSs , , and an inferred EOS, respectively. The vector contains the five crust quantities, and puts them on comparable scales. Thus and . The two recovered distributions shown in Figure 6 overlap by 0.954–0.975, with Jensen–Shannon divergences at most approximately 0.0035 bits (Table D.5). The probability assigned to crusts closer to the injected EOS ranges from 0.433 to 0.588. It changes by at most 0.053 from the present-data value. The recovered medians remain at , and neither endpoint lies within
Figure 6. Construction and recovery of the crust doppelgängers. The upper left panel shows the separation between the two EOSs in units of the full present-data 68% widths. The upper right panel gives their distance at the adopted precision for each measurement. The lower panels compare the present posterior with the two matched recoveries along the crust coordinate , scaled so that EOSs A and B lie at zero and one. Dotted blue and red lines mark these two EOSs.
the central 90% interval: the recovered distributions concentrate at intermediate values of , rather than near either injected endpoint. Combining the radius measurement at , the tidal measurement for the binary, and the inertia measurement at does not distinguish the injected crusts.
The pair demonstrates that similar global observables can coexist with substantially different crusts within the adopted model. It does not determine how frequently such pairs occur. Measurements of radius at percent-level precision, low-mass tidal deformability at 10% precision, and total moment of inertia at 10% precision can remain compatible with factor-of-two differences in crust mass and crustal inertia. Distinguishing these crusts would require stronger constraints on neutron-rich matter or measurements that probe the crust more directly.
The crust can affect global stellar properties without being uniquely constrained by their measurement. Fortin et al. [26] showed that crust–core matching affects stellar radii and crust thicknesses, while Gamba et al. [27] found that the assumed crust changes radii inferred from GW170817 despite its weak effect on the inferred masses and tidal deformabilities. Bayesian crust calculations also demonstrate the constraining role of neutron-skin data and microscopic neutron-matter calculations (Newton et al. [53]). The tidal degeneracies identified by Raithel & Most [63] further illustrate that different EOSs can share similar global observables. Our results extend this picture by showing that, within a unified model, even combined radius, tidal-deformability, and moment-of-inertia measurements at the assumed precision can leave substantial differences in crust mass and crustal moment of inertia unresolved. Complementary probes may provide information on the crust’s mechanical, superfluid, and thermal properties. Resonant excitation of the crust–core interface mode (-mode) during inspiral may trigger a shattering flare [77, 51], while magnetar quasi-periodic oscillations (QPOs), pulsar glitches, and crust cooling probe other aspects of crust physics [39, 74, 72, 75, 13, 7]. Their interpretation requires additional modelling of composition, magnetic fields, superfluidity, entrainment, and mode identification.
Conclusions
A precise determination of global neutron-star properties does not necessarily imply a precise determination of the crust. Within our unified model, present crust constraints are driven mainly by EFT, with laboratory data providing additional information and current NICER and GW170817 observations having a weaker effect. This pattern persists across the stellar masses considered. The inferred precision depends on the adopted EFT bands, while the treatment of neutron-rich surface energy changes the inferred crust properties without appreciably changing the credible widths at fixed surface prescription.
Future measurements of radius, tidal deformability, and total moment of inertia mainly improve constraints on crust thickness. Combining these measurements gives modest additional gains at matched precision, with some improvement in transition density but little in transition pressure, crust mass, or crustal moment of inertia. In the forecasts considered, stellar measurements do not recover the precision lost when EFT is removed.
These findings are conditional on the chosen reference EOS and the adopted nuclear model. The doppelgänger recoveries further show that substantially different crusts can remain compatible with nearly identical global observables under the tested combination of low-mass radius, tidal, and moment-of-inertia measurements.
The conclusions apply to smooth nucleonic EOSs with a fixed outer crust and a spherical CLDM. We expect the main qualitative conclusion, that global stellar measurements leave substantial uncertainty in crust properties, to persist when nuclear pasta or alternative nucleonic models are considered. Progress therefore requires better constraints on low-density neutron-rich matter and its surface energy, together with observations that probe the crust more directly. Resonant shattering flares, magnetar oscillations, pulsar glitches, and crust cooling offer complementary information beyond global stellar measurements.
Unified-model equations
Fourth-order nuclear metamodel
At zero temperature, we describe uniform nucleonic matter by the baryon density , asymmetry , and . Here and are neutron and proton number densities, is the proton fraction, and is the scaled displacement from saturation. The energy per baryon is
Here labels the order in the density expansion, and the superscript (4) denotes truncation at fourth order. The term is the kinetic contribution, including the effective-mass dependence, and and are the isoscalar and isovector interaction coefficients. The empirical parameters defined in Sect. 2 fix them algebraically. The low-density correction factor is
This factor ensures that the energy per baryon vanishes at zero density without changing its value or its first four density derivatives at saturation. It follows the low-density correction introduced by Margueron et al. [46]. Their benchmarks additionally adjust the high-order coefficients to reproduce the density dependence of reference EOSs, demonstrating the flexibility of the fourth-order expansion. These benchmarks do not assign an uncertainty to terms beyond fourth order. Because we do not repeat the inference at another order or with a different low-density correction, the reported credible intervals do not include this model dependence. Cold, fully equilibrated core matter contains neutrons, protons, electrons, and muons in beta equilibrium and satisfies charge neutrality. Accepted EOSs must have positive symmetry energy, mechanical stability, thermodynamic consistency, and subluminal sound speed throughout the density range used by the stellar calculation.
Compressible liquid-drop crust
In a spherical Wigner–Seitz cell, the CLDM energy density, minimized over composition and geometry, is
where is the cluster volume fraction, and are the baryon density and isospin asymmetry of the cluster interior, respectively, and is the dripped-neutron density. The first three terms are the bulk cluster, neutron-gas, and electron energy densities. The remaining terms are the surface, curvature, and Coulomb costs of a finite cluster. We vary the composition and geometry while conserving baryon number and charge. The absence of dripped neutrons distinguishes the outer crust, for which we use the fixed EOS described in Sect. 2.
Writing the cluster proton fraction as , we use the surface tension
where is the surface tension of symmetric matter and controls its dependence on proton fraction. The exponent sets the neutron-rich extrapolation. The curvature coefficient is , where sets its scale, controls its proton-fraction dependence, and is fixed (Newton et al. [52]). For every sampled bulk EOS, we refit the coefficients by least squares to masses from the 2020 Atomic Mass Evaluation (AME2020) (Wang et al. [79]). The exponent is fixed within each calculation. We use as the reference and repeat the calculation at and to measure the sensitivity to the surface energy of very neutron-rich nuclei. The crust–core transition occurs where uniform beta-equilibrated matter becomes energetically favoured over the optimized nuclear phase.
Priors and likelihoods
Prior and present-data likelihood
For data and model , Bayes’ theorem gives
Here is the posterior density, is the prior density, is the likelihood, and the evidence normalizes the posterior. We use only for normalization, not to compare cases that contain different data. Table B.1 lists the independent uniform priors on the metamodel parameters.
| Parameter | Prior | Unit | Parameter | Prior | Unit |
| [0.150, 0.170] | fm | [-17, -15] | MeV | ||
| [190, 320] | MeV | [-1000, 1000] | MeV | ||
| [-3000, 3000] | MeV | [25, 40] | MeV | ||
| [10, 100] | MeV | [-400, 400] | MeV | ||
| [-2000, 2000] | MeV | [-5000, 5000] | MeV | ||
| [0.60, 0.80] | — | [0, 0.20] | — | ||
| [1, 10] | — |
Table B.1. Continuous uniform priors.
Notes. Energy coefficients are in MeV. The effective-mass parameters are dimensionless and defined in Sect. 2.
The physical term in Eq. (2) requires a valid unified EOS that satisfies the conditions in Appendix § 7. We treat the observed maximum mass as a lower bound. EOSs with well above receive the same weight, while a one-sided Gaussian turn-on of width smoothly suppresses models below it. threshold is consistent with the observed two-solar-mass pulsars [5, 18]. Table B.2 summarizes all terms in the present-data likelihood. For the Gaussian terms in and , a quoted value contributes a normal density , where is the measured central value, its standard deviation, and
the corresponding prediction of the sampled EOS at density . The adopted saturation constraints and their supporting sources are listed in Table B.2. The finite-density set is the subset of the experimental compilation of Tsang et al. [76] used in our calculation. The laboratory constraints are treated as independent.
| Likelihood | Physical input | [fm] | Adopted constraint or likelihood | Source |
| Physical admissibility | Full EOS | Thermodynamic consistency, stability, positive symmetry energy, and causality | Appendix A | |
| Saturation density | — | fm | [8, 46] | |
| Saturation energy | — | MeV | [12, 68] | |
| Incompressibility | — | MeV | [40] | |
| Dipole polarizability: | [81] | |||
| Isobaric analogue states and isovector skins: | [20] | |||
| Isospin diffusion: | [78] | |||
| Neutron/proton yields: | Morfouace et al. (2019) | |||
| Pion spectral ratio: | [24] | |||
| Pion spectral ratio: | [24] | |||
| Neutron/proton elliptic flow: | [17, 70, 71] | |||
| Collective flow: | [19] | |||
| Symmetric and pure-neutron matter energies | – | Uniform acceptance inside the energy bands at the evaluated densities, zero outside. Reference widening (Eq. (B.3)) | [22, 10 b] | |
| Maximum stellar mass | — | One-sided Gaussian suppression below , with width | [5, 18] | |
| PSR J0030+0451: | — | , km | [66] | |
| PSR J0437−4715: | — | , km | [15] | |
| PSR J0614−3329: | — | , km | [49] | |
| PSR J0740+6620: | — | , km | [67] | |
| Binary tidal deformability and mass ratio | — | Public EOS-insensitive posterior in , marginalized over at | [1] |
Table B.2. Nuclear and astrophysical inputs to the present-data likelihood.
Notes. is the symmetry energy, is its local density slope, is the symmetry pressure, and is the pressure of symmetric nuclear matter. Energies are in MeV and pressures in MeV fm. For the nuclear Gaussian terms, quoted uncertainties are one standard deviation. The widening is applied to the absolute boundary energies. Sensitivity variants use , , , or omit this term. NICER values summarize the published marginal credible intervals for mass and equatorial radius. Each NICER source density is integrated along the predicted mass–radius curve using Eq. (B.4), and the four source terms are multiplied. The chirp mass , mass ratio , and tidal parameter are defined below.
We compare symmetric and pure-neutron matter with the envelope at densities from to fm.
Here denotes an evaluated density, with indexing these densities. The quantity is the model energy per baryon, and and are the lower and upper acceptance limits. The inequalities must hold for both symmetric and pure-neutron matter. We use the bands published with the NSEoS implementation (Carreau et al. [10]). They draw on the chiral two- and three-nucleon calculations of Drischler et al. [22]. Every EOS inside the envelope has the same likelihood. In the reference calculation we widen both edges outwards by a fraction of their absolute energies:
The primed limits are used in Eq. (B.2). Thus the percentage refers to the boundary energies, not to the original band width. The sensitivity calculations use the original EFT bands (), widenings of and , or omit the EFT constraint entirely.
For each NICER source , we evaluate the reconstructed mass–radius density along the EOS curve,
Here is the predicted radius, denotes the observations included in the published source analysis, and is its reconstructed joint mass–radius posterior density. This prescription uses a flat reference prior in mass and radius. Any radio timing information included in is retained in . We include J0030+0451 (Riley et al. [66]), J0437–4715 (Choudhury et al. [15]), J0614–3329 (Mauviard et al. [49]), and J0740+6620 (Riley et al. [67]).
For GW170817, we use the public EOS-insensitive posterior in the mass ratio and the binary tidal parameter (Abbott et al. [1]). Here and are the source-frame component masses, and
Here and are evaluated from the sampled EOS. We marginalize over at fixed source-frame chirp mass . This retains the binary-mass uncertainty while testing the complete tidal curve rather than one value of .
Forecast likelihoods and reference EOS
We choose the reference EOS from the full present-data posterior, near the nuclear-parameter medians. We require the reference EOS to support the full forecast mass range, with a small margin above the highest target mass.
For a mass–radius observation centred on , where is the injected stellar mass and is the reference EOS radius, the model-curve likelihood is
where is the bivariate normal density with centre and covariance . The integral follows the predicted curve and therefore marginalizes over the measured mass rather than evaluating the EOS at one fixed mass. We use independent 2% standard deviations in and . The tidal forecasts use a reference equal-mass binary with component mass and a 5%, 10%, or 20% Gaussian uncertainty on . We marginalize over a Gaussian mass-ratio distribution peaking at , with Gaussian width 0.03, truncated to , at fixed injected chirp mass. The moment-of-inertia likelihood is
where is the predicted moment of inertia, is its injected value, and or 0.10 is the fractional standard deviation. Writing and for the present and forecast data, with denoting the likelihood of the added measurements, each forecast samples
The corresponding no-EFT posterior is
where the superscript EFT denotes omission of the EFT factor from the present likelihood. The reference EOS and future likelihood are unchanged. We repeat four forecasts: five 2% radius measurements, a 5% measurement, the realistic combined programme, and the multi-star combined programme. Each forecast differs from its EFT-conditioned counterpart only through removal of the EFT term.
Crust-doppelgänger definition
The observable vector in Eq. (7) contains radii at 1.2, 1.4, and 1.8 , tidal deformabilities at 1.2, 1.4, and 1.6 , and the maximum mass . Moment of inertia is reserved for an independent test. The selection distances are defined in Eqs. (7) and (8). The scale , evaluated with posterior weights, measures the spread while reducing sensitivity to extreme values. The factor 1.4826 gives the standard deviation for a Gaussian distribution (Rousseeuw & Croux [69]). We maximize subject to . Figure C.1 shows the Pareto frontier (the best compromises between similar global observables and different crusts) (Marler & Arora [48]).
The measurement distance is defined in Eq. (10). Independent measurements add in . For a scalar observable , the fractional standard deviation needed to reach a distance is
Here and are the two predictions. Reducing all standard deviations by gives the same target distance (Table 4). These distances compare fixed EOSs and are not detection significances for a particular instrument.
The measurements in Table C.1 were chosen before the recoveries. For radius and tidal deformability, we selected the forecast with the smallest joint covariance volume of the five scaled crust quantities. The inertia precision follows the reference forecast for J0737–3039A. Both injected EOSs use the same measurement uncertainties.
| Class | Added zero-noise measurement |
| Mass–radius | at 1.2 with independent 2% errors |
| Tidal | Equal-mass binary with 10% uncertainty in and a Gaussian mass-ratio distribution peaking at , with Gaussian width 0.03, truncated to |
| Inertia | with 10% uncertainty |
| Combined | all three measurements above |
Table C.1. Forecast measurements for the crust doppelgängers.
Notes. We generate each measurement once from EOS A and once from EOS B. We always combine it with the full present-data constraints.
We compare the recovered crusts using the coordinate defined in Eq. (11). For each measurement type, let and be the normalized posterior densities obtained from data generated by A and B, respectively. We report their posterior-overlap coefficient (Pastore & Calcagni [60])
which runs from zero for disjoint distributions to one for identical distributions. We also use the symmetric Jensen–Shannon divergence Lin [44].
Here is the Kullback–Leibler divergence of Eq. (4), applied to the normalized densities in , and is their equally weighted mixture. The Jensen–Shannon divergence is symmetric and ranges from zero for identical distributions to one bit for distributions with no overlap. We also report the probability on the side of containing the injected EOS: for A and for B. Recovery requires consistency with the injected EOS and preference over the other member, rather than narrowing alone. Table D.5 lists all eight recoveries.
Figure C.1. Robustness of the crust-doppelgänger selection. Left: joint crust distance versus exterior-observable distance along the Pareto frontier. Orange points mark the largest crust separations below the tested limits on , and the star marks the selected pair. Right: number of accepted EOS pairs below each exterior-distance limit, shown for all pairs and for three minimum crust separations. The vertical dashed lines mark . The annotation in the right panel gives the pair counts at this limit.
Numerical posterior tables
These tables summarize the posterior constraints and forecast results.
| Parameter | median | 68% | 90% | Crust quantity | median | 68% | 90% |
| [fm] | 0.1601 | [0.1561, 0.1646] | [0.1537, 0.1671] | [fm] | 0.0811 | [0.0742, 0.0895] | [0.0704, 0.0951] |
| [MeV] | −15.95 | [−16.13, −15.76] | [−16.25, −15.65] | [MeV fm] | 0.396 | [0.328, 0.475] | [0.291, 0.528] |
| [MeV] | 231 | [215, 246] | [206, 257] | [km] | 1.048 | [0.985, 1.110] | [0.943, 1.151] |
| [MeV] | −359 | [−499, −206] | [−575, −89] | [] | 0.0243 | [0.0204, 0.0285] | [0.0180, 0.0314] |
| [MeV] | 674 | [−230, 1776] | [−573, 2436] | 0.0355 | [0.0301, 0.0412] | [0.0267, 0.0452] | |
| [MeV] | 30.69 | [29.70, 31.79] | [29.24, 32.43] | ||||
| [MeV] | 47.04 | [38.37, 54.75] | [33.39, 58.61] | ||||
| [MeV] | −85 | [−137, −32] | [−171, 6] | ||||
| [MeV] | 965 | [613, 1327] | [397, 1565] | ||||
| [MeV] | −2413 | [−4042, −406] | [−4635, 879] | ||||
| 0.69 | [0.63, 0.77] | [0.61, 0.79] | |||||
| 0.11 | [0.04, 0.17] | [0.01, 0.19] | |||||
| 4.31 | [1.89, 7.76] | [1.34, 9.32] |
Table D.1. Reference posterior using all present constraints.
Notes. The left block gives the thirteen empirical parameters. The effective-mass parameters and are dimensionless. The right block gives the five crust targets, with mass-labelled quantities at . Entries are the median and central 68% and 90% intervals.
| Case | ||||||
| physical only | 2.29 | 2.39 | 3.28 | 3.04 | 3.19 | 1.78 |
| nuclear only | 0.84 | 0.86 | 1.11 | 1.02 | 1.01 | 0.15 |
| astrophysical only | 2.73 | 3.54 | 2.91 | 3.65 | 3.78 | 0.98 |
| all present | 1.00 | 1.00 | 1.00 | 1.00 | 1.00 | 0.00 |
| no EFT | 2.34 | 2.91 | 2.08 | 2.89 | 2.96 | 0.86 |
| no laboratory | 1.27 | 1.24 | 1.11 | 1.20 | 1.19 | 0.32 |
| no NICER | 0.83 | 0.88 | 1.05 | 0.99 | 1.00 | 0.13 |
| no GW170817 | 0.98 | 0.99 | 1.05 | 1.03 | 1.04 | 0.07 |
| EFT original | 0.48 | 0.42 | 0.78 | 0.54 | 0.53 | 0.25 |
| EFT 10% | 1.28 | 1.34 | 1.22 | 1.37 | 1.38 | 0.09 |
| EFT 20% | 1.69 | 1.96 | 1.49 | 1.93 | 1.97 | 0.21 |
| surface | 1.02 | 0.97 | 1.04 | 1.03 | 1.04 | 0.52 |
| surface | 0.97 | 1.03 | 1.01 | 1.06 | 1.06 | 0.32 |
Table D.2. Sensitivity to present constraints.
Notes. The five central columns give . Values above one are broader than the reference posterior. The last column gives the largest absolute normalized median shift, , where .
| [km] | [] | ||
| 1.0 | 1.573 [1.492, 1.654] | 0.0320 [0.0273, 0.0369] | 0.0641 [0.0555, 0.0733] |
| 1.2 | 1.275 [1.204, 1.347] | 0.0280 [0.0237, 0.0326] | 0.0472 [0.0403, 0.0544] |
| 1.4 | 1.048 [0.985, 1.110] | 0.0243 [0.0204, 0.0285] | 0.0355 [0.0301, 0.0412] |
| 1.6 | 0.864 [0.809, 0.920] | 0.0209 [0.0174, 0.0247] | 0.0269 [0.0226, 0.0314] |
| 1.8 | 0.708 [0.659, 0.759] | 0.0176 [0.0145, 0.0209] | 0.0203 [0.0169, 0.0240] |
| 2.0 | 0.573 [0.525, 0.619] | 0.0143 [0.0117, 0.0172] | 0.0151 [0.0124, 0.0180] |
Table D.3. Mass dependence of the reference crust posterior.
Notes. Each cell reports the median followed by the central 68% interval [].
| Case | [bits] | ||||||
| , 2% | 1.05 | 1.02 | 1.09 | 0.96 | 0.96 | 1.01 | 0.027 |
| , 2% | 1.01 | 1.00 | 1.12 | 0.98 | 0.98 | 1.01 | 0.029 |
| , 2% | 0.98 | 0.98 | 1.12 | 0.97 | 0.97 | 1.00 | 0.035 |
| , 2% | 0.97 | 0.96 | 1.11 | 0.99 | 0.98 | 1.00 | 0.065 |
| five , 2% | 1.05 | 1.04 | 1.22 | 1.03 | 1.01 | 1.07 | 0.147 |
| , 10% | 1.05 | 1.03 | 1.15 | 1.00 | 1.00 | 1.04 | 0.047 |
| , 10% | 0.97 | 0.98 | 1.17 | 0.99 | 0.99 | 1.02 | 0.055 |
| , 10% | 0.93 | 0.91 | 1.21 | 0.98 | 0.97 | 0.99 | 0.145 |
| , 5% | 0.97 | 0.98 | 1.27 | 1.01 | 1.01 | 1.04 | 0.124 |
| , 20% | 1.02 | 0.99 | 1.06 | 0.99 | 0.99 | 1.01 | 0.017 |
| , 10% | 1.02 | 0.98 | 0.99 | 0.97 | 0.96 | 0.98 | 0.006 |
| , 5% | 1.01 | 1.02 | 1.09 | 1.00 | 0.99 | 1.02 | 0.021 |
| realistic combined | 0.94 | 0.95 | 1.21 | 1.00 | 0.98 | 1.01 | 0.115 |
| multi-star combined | 1.11 | 1.01 | 1.22 | 1.01 | 0.98 | 1.06 | 0.162 |
Table D.4. Effect of future measurements.
Notes. The five crust columns give . Values above one indicate narrower intervals. is their geometric mean, and the final column is the largest marginalized information gain for that measurement.
| Measurement | [bits] | |||||
| mass–radius | 0.0248 | 0.954 | 0.00351 | 0.524 | 0.433 | 0.032 |
| tidal | 0.0299 | 0.968 | 0.00233 | 0.588 | 0.442 | 0.053 |
| inertia | 0.0176 | 0.967 | 0.00165 | 0.560 | 0.443 | 0.024 |
| combined | 0.0427 | 0.975 | 0.00194 | 0.553 | 0.434 | 0.030 |
Table D.5. Recovery of the selected crust doppellgängers.
Notes. The crust properties of the two EOSs are listed in Table 3. is the fixed-EOS distance at the adopted measurement precision, is the overlap of the two recovered distributions in , is their Jensen–Shannon divergence, and () is the probability assigned to the correct side of for data generated from (). The final column is the larger absolute change in this probability relative to the present-data posterior.
References
- [1]Abbott, B. P. et al. 2018, Phys. Rev. Lett., 121, 161101
- [2]Anderson, P. W. & Itoh, N. 1975, Nature, 256, 25
- [3]Andersson, N., Glampedakis, K., Ho, W. C. G., & Espinoza, C. M. 2012, Phys. Rev. Lett., 109, 241103
- [4]Annala, E., Gorda, T., Kurkela, A., Nättilä, J., & Vuorinen, A. 2020, Nature Phys., 16, 907
- [5]Antoniadis, J. et al. 2013, Science, 340, 1233232
- [6]Balliet, L. E., Newton, W. G., Cantu, S., & Budimir, S. 2021, ApJ, 918, 79
- [7]Brown, E. F. & Cumming, A. 2009, ApJ, 698, 1020
- [8]Buchinger, F., Crawford, J. E., Dutta, A. K., Pearson, J. M., & Tondeur, F. 1994, Phys. Rev. C, 49, 1402
- [9]Burrello, S., Gülminelli, F., Antonelli, M., Colonna, M., & Fantina, A. F. 2025, Phys. Rev. C, 112, 035802
- [10]Carreau, T., Gulminelli, F., & Margueron, J. 2019a, Eur. Phys. J. A, 55, 188
- [12]Chabanat, E., Bonche, P., Haensel, P., Meyer, J., & Schaeffer, R. 1997, Nucl. Phys. A, 627, 710
- [13]Chamel, N. 2013, Phys. Rev. Lett., 110, 011101
- [14]Chamel, N. & Haensel, P. 2008, Living Rev. Rel., 11, 10
- [15]Choudhury, D. et al. 2024, ApJL, 971, L20
- [16]Cowan, G., Cranmer, K., Gross, E., & Vitells, O. 2011, Eur. Phys. J. C, 71, 1554
- [17]Cozma, M. D. 2018, Eur. Phys. J. A, 54, 40
- [18]Cromartie, H. T. et al. 2020, Nat. Astron., 4, 72
- [19]Danielewicz, P., Lacey, R., & Lynch, W. G. 2002, Science, 298, 1592
- [20]Danielewicz, P., Singh, P., & Lee, J. 2017, Nucl. Phys. A, 958, 147
- [21]Dinh Thi, H., Carreau, T., Fantina, A. F., & Gulminelli, F. 2021, A&A, 654, A114
- [22]Drischler, C., Hebeler, K., & Schwenk, A. 2016, Phys. Rev. C, 93, 054314
- [23]Essick, R., Landry, P., & Holz, D. E. 2020, Phys. Rev. D, 101, 063007
- [24]Estee, J. et al. 2021, Phys. Rev. Lett., 126, 162701
- [25]Ferreira, M. & Providência, C. 2020, Universe, 6, 220
- [26]Fortin, M., Providencia, C., Raduta, A. R., et al. 2016, Phys. Rev. C, 94, 035804
- [27]Gamba, R., Read, J. S., & Wade, L. E. 2020, Class. Quant. Grav., 37, 025008
- [28]Geppert, U., Küker, M., & Page, D. 2004, A&A, 426, 267
- [29]Goriely, S., Chamel, N., Janka, H.-T., & Pearson, J. M. 2011, A&A, 531, A78
- [30]Goriely, S., Chamel, N., & Pearson, J. M. 2013, Phys. Rev. C, 88, 024308
- [31]Göttling, H., Hoff, L., Hebeler, K., & Schwenk, A. 2026, Phys. Rev. C, 113, 055804
- [32]Grams, G., Margueron, J., Somandurdam, R., Chamel, N., & Goriely, S. 2022, J. Phys. Conf. Ser., 2340, 012030
- [33]Hebeler, K., Lattimer, J. M., Pethick, C. J., & Schwenk, A. 2013, ApJ, 773, 11
- [34]Horowitz, C. J. & Kadauk, K. 2009, Phys. Rev. Lett., 102, 191102
- [35]Hotokezaka, K., Kyutoku, K., Sekiguchi, Y., & Shibata, M. 2016, Phys. Rev. D, 93, 064082
- [36]Huang, C., Tolos, L., Providencia, C., & Watts, A. L. 2025, MNRAS, 536, 3262
- [37]Huth, S., Pang, P. T. H., Tews, I., et al. 2022, Nature, 606, 276
- [38]Iacovelli, F., Mancarella, M., Mondal, C., et al. 2023, Phys. Rev. D, 108, 122006
- [39]Israel, G. L., Belloni, T., Stella, L., et al. 2005, ApJL, 628, L53
- [40]Khan, E., Margueron, J., & Vidaña, I. 2012, Phys. Rev. Lett., 109, 092501
- [41]Klausner, P., Antonelli, M., & Gulminelli, F. 2026, Phys. Rev. C, 113, 025808
- [42]Kullback, S. & Leibler, R. A. 1951, Ann. Math. Stat., 22, 79
- [43]Lim, Y.-H., Holt, J. W., & Stahulak, R. J. 2019, Phys. Rev. C, 100, 035802
- [44]Lin, J. 1991, IEEE Transactions on Information Theory, 37, 145
- [45]Link, B., Epstein, R. I., & Lattimer, J. M. 1999, Phys. Rev. Lett., 83, 3362
- [46]Margueron, J., Hoffmann Casali, R., & Gulminelli, F. 2018a, Phys. Rev. C, 97, 025805
- [48]Marler, R. T. & Arora, J. S. 2004, Structural and Multidisciplinary Optimization, 26, 369
- [49]Mauviard, L. et al. 2025, ApJ, 995, 60
- [51]Neill, D., Preston, R., Newton, W. G., & Tsang, D. 2023, Phys. Rev. Lett., 130, 112701
- [52]Newton, W. G., Gearheart, M., & Li, B.-A. 2013, ApJS, 204, 9
- [53]Newton, W. G., Preston, R., Balliet, L., & Ross, M. 2022, Phys. Lett. B, 834, 137481
- [54]Pacilio, C., Maselli, A., Fasano, M., & Pani, P. 2022, Phys. Rev. Lett., 128, 101101
- [55]Page, D. & Reddy, S. 2013, Phys. Rev. Lett., 111, 241102
- [56]Pang, P. T. H., Tews, I., Coughlin, M. W., et al. 2021, ApJ, 922, 14
- [57]Parmar, V. & Bombaci, I. 2026a, Phys. Rev. D, 113, 083017
- [58]Parmar, V. & Bombaci, I. 2026b, Phys. Rev. D, 114, 023009
- [59]Parmar, V., Scordino, D., & Bombaci, I. 2026, A&A, 714, A87
- [60]Pastore, M. & Calcagni, A. 2019, Frontiers in Physiology, 10, 1089
- [61]Raaijmakers, G., Greif, S. K., Hebeler, K., et al. 2021, ApJL, 918, L29
- [63]Raithel, C. A. & Most, E. R. 2023b, Phys. Rev. D, 108, 023010
- [64]Ravenhall, D. G., Pethick, C. J., & Lattimer, J. M. 1983, Nucl. Phys. A, 407, 571
- [65]Ray, P. S. et al. 2019, STROBE-X: X-ray Timing and Spectroscopy on Dynamical Timescales from Microseconds to Years, NASA Probe-class mission concept study report
- [66]Riley, T. E. et al. 2019, ApJL, 887, L21
- [67]Riley, T. E. et al. 2021, ApJL, 918, L27
- [68]Roca-Maza, X., Paar, N., & Colò, G. 2015, J. Phys. G, 42, 034033
- [69]Rousseeuw, P. J. & Croux, C. 1993, Journal of the American Statistical Association, 88, 1273
- [70]Russotto, P. et al. 2011, Phys. Lett. B, 697, 471
- [71]Russotto, P. et al. 2016, Phys. Rev. C, 94, 034608
- [72]Samuelsson, L. & Andersson, N. 2007, MNRAS, 374, 256
- [73]Scurto, L., Pais, H., & Gulminelli, F. 2024, Phys. Rev. D, 109, 103015
- [74]Strohmayer, T. E. & Watts, A. L. 2006, ApJ, 653, 593
- [75]Tews, I. 2017, Phys. Rev. C, 95, 015803
- [76]Tsang, C. Y., Tsang, M. B., Lynch, W. G., Kumar, R., & Horowitz, C. J. 2024, Nat. Astron., 8, 328
- [77]Tsang, D., Read, J. S., Hinderer, T., Piro, A. L., & Bondarescu, R. 2012, Phys. Rev. Lett., 108, 011102
- [78]Tsang, M. B. et al. 2009, Phys. Rev. Lett., 102, 122701
- [79]Wang, M., Huang, W. J., Kondev, F. G., Audi, G., & Naimi, S. 2021, Chin. Phys. C, 45, 030003
- [80]Weih, L. R., Most, E. R., & Rezzolla, L. 2019, ApJ, 881, 73
- [81]Zhang, Z. & Chen, L.-W. 2015, Phys. Rev. C, 92, 031301






