In this paper
AbstractFe-mediated synthesis of aGNR–hGDY junctionsAtomically abrupt type-I interfaceEffect of heterostructure on constituent–substrate couplingConclusionsMethodsExperimentTheorySupporting Information availableAcknowledgmentsAuthor contributionsCompeting interestsSupporting Information: Atomically abrupt carbon heterojunction preserving the electronic identity of constituent allotropesOn-surface synthesis of aGNR-hGDY heterostructureLinking efficiency and configurations between hGDY and aGNRsOrbital-resolved PDOSConstant-current mapsDecoupling from the surfaceReferencesWorksPhysics and Astronomy
Atomically abrupt sp-sp all-carbon heterojunction preserving the electronic identity of constituent allotropes
Abstract
Covalently integrating distinct carbon allotropes with atomic precision remains, to date, elusive, despite the clear advantage of combining complementary functionalities while preserving their electronic identities. Here, we realize an all-carbon lateral heterojunction combining () armchair graphene nanoribbons (GNRs) and - hydrogenated graphdiyne (hGDY) on Au(111) through Fe-mediated hierarchical on-surface synthesis. Low-temperature scanning tunnelling microscopy and spectroscopy combined with density-functional theory reveal an atomically abrupt (<0.5 nm), asymmetric type-I interface. Redistribution of an edge-localized GNR state onto the first hGDY unit demonstrates local electronic continuity, whereas their characteristic electronic structures re-emerge immediately beyond the interface. Calculations further indicate that heterojunction formation weakens the interaction of both constituents with the underlying Au(111) substrate, widening their gaps and reducing adsorption-induced interfacial polarization. These results establish lateral covalent integration as a route to engineer atomically defined electronic interfaces and substrate coupling in all-carbon nanostructures.
Atomically precise lateral heterojunctions integrating distinct two-dimensional carbon allotropes through covalent interfaces offer a powerful route to engineer the electronic properties of low-dimensional carbon nanostructures. By combining different -conjugated building blocks within a single architecture, they can generate interface-specific electronic states and functionalities beyond those of the individual constituents. [1, 2, 3] On-surface synthesis provides the atomic-scale control required to realize such structures. [4]
To date, however, most carbon heterojunctions have been based on graphene nanoribbons (GNRs), combining segments with different widths, edge topologies, or chemical compositions, [5, 6, 7, 8] while atomically precise heterojunctions between carbon allotropes characterized by fundamentally different hybridization and conjugation schemes remain largely unexplored.
Graphdiyne provides an ideal counterpart to the network of GNRs, owing to its characteristic combination of - and -hybridized carbon atoms and diacetylenic linkages. This distinct conjugation gives rise to electronic and structural properties markedly different from those of graphene and has stimulated interest in applications ranging from electronics and optoelectronics to catalysis and molecular sieving. [9] [10] Integrating graphdiyne and GNRs within a covalently bonded architecture could therefore provide access to atomically abrupt interfaces between two fundamentally different carbon -networks. However, achieving such all-carbon interfaces is highly challenging. On-surface synthesis of hydrogenated graphdiyne (hGDY) on Au(111) typically results in Au incorporation into the diacetylenic framework, forming organometallic C–Au–C motifs, while residual Br by-products can further hinder the formation of extended hGDY domains and their covalent connection to other carbon nanostructures. [11]
Here, we overcome these limitations and realize atomically precise all-carbon heterojunctions through a hierarchical on-surface synthesis strategy. Building on our finding that Fe promotes both the removal of Br by-products and Au adatoms, [12] we extend this approach to covalently integrate two distinct carbon allotropes: armchair graphene nanoribbons (aGNRs) and hGDYs. By combining low-temperature scanning tunneling microscopy and spectroscopy (LT-STM/STS) with density-functional-theory calculations, we resolve the atomic and electronic structure of the resulting – aGNR-hGDY interface. The two lattices form a direct covalent junction without an intermediate phase, while the associated electronic transition occurs within less than 0.5 nm, resulting in an atomically abrupt interface. We further show that the lateral covalent coupling established upon heterojunction formation drives both aGNR and hGDY into a structural and electronic configuration that interacts more weakly with the underlying Au(111) surface than when the two constituents are adsorbed separately. This weaker substrate coupling partially restores the electronic features characteristic of the corresponding freestanding systems, suggesting a strategy in which lateral covalent coupling is used to control vertical interaction with the supporting substrate.
Fe-mediated synthesis of aGNR–hGDY junctions
Covalent aGNR–hGDY heterostructures (HTSs) were synthesized on Au(111) through a sequential, multi-precursor on-surface process mediated by Fe, as summarized in Figure 1a (details in Figure S1 and Methods). Low-coverage aGNRs, predominantly 3- and 6-aGNRs, were first prepared from 4,4″-dibromo-p-terphenyl (DBTP) following an established procedure [13–15]. The nanoribbons subsequently served as templates for the growth of metalated hGDY islands from 1,3,5-tri(bromoethynyl)benzene (tBEB). At this stage, residual Br species accumulate predominantly at the aGNR–hGDY boundary and form complexes with Au adatoms at the hGDY terminations, preventing direct covalent coupling (Figure 1b) [11]. Fe deposition followed by annealing at 450 K promotes the formation of FeBr species and the removal of Au adatoms from the network, leading to complete hGDY demetallation (Figure 1c) [12]. Subsequent annealing at 530 K and 610 K induces covalent coupling to the aGNRs, the removal of FeBr, and partial reordering of the hGDY network (Figure 1d) [12]. This Fe-mediated process increases the linking efficiency to , compared with for thermally driven synthesis and following atomic-hydrogen exposure [11]. The corresponding statistical analysis is reported in Supplementary Section S2.

Figure 1. a) Hierarchical synthetic route model to achieve aGNR-hGDY heterostructures. LT-STM images of b) the aGNR-hGDY system on Au(111) upon annealing at 400 K, before the aGNR-hGDY bonding [11]; c) the system upon Fe deposition and annealing at 450 K, with the formation of FeBr aggregates and removal of Au adatoms from the hGDY; d) exemplified covalent all-carbon heterojunctions between the hGDY and 3-aGNRs, obtained upon annealing at 610 K; e) an exemplifying close-up of the junction covalent bond between hGDY and a 6-aGNR, obtained with CO-functionalized tip. Grey color scale has been chosen to better underline the structural features at the junction. f) model of the heterostructure bonding. g) structural model of the heterojunction and unit cell (red line). STM set-point: (b) -10 mV/80 pA, (c) -10 mV/8 pA, (d) -20 mV/40 pA, (e) -3mV/60pA.

Figure S1. (a) Sketch of the Fe-mediated OSS process. Above the scheme, the ball-and-stick atomic model of DBTP and tBEB precursors. Schematized steps: tBEB deposition on the aGNR/Au(111) sample, generating the metalated hGDY (aGNRs synthesis steps are detailed in Methods); Fe atoms evaporation and bonding with chemisorbed Br atoms resulting in molecules at room temperature; demetalation of the hGDY; disappearance and linking between the covalent hGDYs and the aGNRs. (b-e) Large-scale and (f-i) close-up atomically-resolved LT-STM images of each reaction step schematized in (a). Ball-and-stick atomic models of the metalated and covalent hGDY are superimposed on (f) and (i), respectively. STM set-point: (b) -100mV/80pA, (c) -100mV/80pA, (d) -10mV/40pA, (e) -1V/5pA, (f) -2mV/30pA, (g) -2mV/60pA, (h) -10mV/8pA, (i) -3mV/30pA.
Line-profile analysis performed over several LT-STM images of the hGDY upon the formation of the all-carbon heterojunction yields an average hGDY periodicity of nm At the junction, the two carbon atoms of a terminal hGDY acetylene unit bond to two edge carbon atoms of the aGNR, forming an additional aromatic ring (Figure 1e,Figure 1f) [11] with a preferred () perpendicular linking between the two subsystems (see S2 for statistical details).
Guided by these observations, we built the atomistic model, shown in Figure 1g, reproducing the experimentally observed aGNR–hGDY geometry while maintaining commensurability with Au(111); its complete geometrical description is provided in Methods.
Atomically abrupt type-I interface
To determine how the electronic states of aGNR and hGDY evolve across their covalent boundary, we combined spatially resolved LT-STS measurements with density-functional-theory calculations.
Figure 2a shows the experimental local density of states (LDOS) along the heterojunction, obtained by averaging the signal, acquired in constant-current mode, along the 2 nm vertical region parallel to the aGNR axis shown in the STM image in Figure 2b, with a step of 0.2 nm. The corresponding calculated LDOS along the junction, averaged over the same spatial interval (simulated STM image in Figure 2d) is reported in Figure 2c. The experimental profile displays prominent spectroscopic features at approximately -1.6 V and +1.35 V in the aGNR region and at approximately -2.0 V and +2.1 V in the hGDY region. Their relative alignment, highlighted by blue lines, is consistent with a type-I heterojunction, in which the experimentally accessible gap of the aGNR lies within that of hGDY. A comparable band offset is reproduced by the calculated LDOS, which exhibits intense features localized on the aGNR and hGDY domains at energies closely matching the experimental values (blue lines in Figure 2c), corresponding to states (left inset of Figure 2c).

Figure 2. a) Experimental averaged LDOS across the heterojunction. Blue lines mark the experimental band edges. b) Atomically resolved LT-STM image of the area used to average the signal reported in a). Shaded red area marks the interface extension. (c) Calculated LDOS across the heterojunction averaged over a unit cell. Inset: projected density of states (PDOS) on and states on carbon. Blue lines mark the band edges corresponding to states. Green lines evidence the true band edges across the junction due to states. (d) Constant-current simulated STM image of the heterojunction. Shaded red area marks the interface extension. e), f) Experimental fit of the profiles extracted at eV (interface state), and eV (unoccupied band), respectively. Horizontal dashed lines indicate the fitted background, while vertical colored dashed lines mark the distance at which the spectral weight above background decreases to of its value at the junction. STS set-point: V/60 pA, with lock-in amplitude 20 mV and frequency 817 Hz.
Calculated electronic structure, however, reveals additional states closer to the Fermi level. The calculated frontier orbitals delimiting the aGNR bandgap are found approximately at -0.5 eV and +0.3 eV, whereas those delimiting the hGDY bandgap are predicted at approximately -1.55 eV and +0.5 eV, as indicated by the green markers in Figure 2c. The resulting alignment therefore retains a type-I character, but is markedly asymmetric, with a large valence-band offset and nearly aligned conduction-band edges. This electronic landscape strongly confines valence states to the aGNR, while providing a substantially lower barrier for conduction-band states across the junction. The proximity of the hGDY conduction-band edge to the common Fermi level further indicates a pronounced n-type character of the hGDY domain, while aGNR shows a mild p-type character. The PDOS on carbon orbitals (inset of Figure 2c) reveals that the states resolved by the calculation near the Fermi level have character. These states are not clearly resolved in the spatially averaged experimental profile mainly due to the difference in the relative intensity between the and states determined by the setpoint chosen for the STS measurements [11]. However, the experimental validation of their presence is given by local spectra and energy-resolved conductance maps discussed below. Both the experimental and calculated LDOS (Figure 2a, c, respectively) also reveal a sharp state at -1.6 eV localized at the interface between the two sub systems, which rapidly decays in the hGDY.
An exponential fit of the spatially resolved intensity of profiles (Figure 2e-Figure 2f) yields comparable decay lengths of ∼ 0.2 nm for the experimentally observed aGNR band features, with their spectral weight decreasing to 10% of the interfacial value within approximately 0.5 nm (red shaded area in Figure 2b,Figure 2d). This subnanometer spatial evolution, leading to a rapid recovery of the characteristic electronic fingerprints of each allotrope away from the boundary, demonstrates the electronically abrupt nature of the heterojunction and excludes an extended electronic transition region.
Site-resolved experimental STS spectra (Figure 3a), compared with the corresponding calculated PDOS (Figure 3b and Figure S3) and supported by experimental maps (Figure 3c-Figure 3e and Figure S4-Figure S5), reveal the spatial distribution and orbital character of the relevant states in the heterojunction. STS spectra measured in different positions of the heterostructure (Figure 3a, color code in inset) show a prominent feature at -2.1 V that extends over the edges of aGNR (red line), the bulk hGDY (violet line) and with a lower weight also at the interface (cyan and purple lines) and in the inner aGNR (green line), in fair agreement with the calculated PDOS (features at ∼ -2.1 eV in Figure 3b). The experimental map at that energy (Figure 3c) allows us to identify a state at the edge of aGNR (lobes protruding outwards) and state on the hGDY region (lobes in plane), as confirmed by the orbital-projected PDOS analysis (Figure S3,Figure S3,Figure S3). Another intense feature at -1.6 V in the STS spectrum is mainly localized at the aGNR edge and on the inner carbon atom of the first phenyl ring of the hGDY (red and purple lines), in agreement with the calculated PDOS (red and purple lines in correspondence of the arrow at -1.15 eV). As further confirmed by the experimental map in Figure 3d, this state at the edge of aGNR is interrupted at the linking site of the junction but, rather than disappearing at the ribbon termination, the edge-derived wavefunction extends into the first hydrogenated phenyl unit of the hGDY domain, where its intensity is slightly reduced. This spatial continuity of the interface state is consistent with covalent coupling across the junction.

Figure 3. a) Conductance spectra acquired at the colour-coded dot positions reported in the LT-STM image in the inset. b) Projected density of states on carbon atoms in the heterostructure corresponding to the positions marked in panel a). c-e) Energy-dependent dI/dV maps at different voltages reported above each panel. STS set-point: -0.55 V/60 pA, with lock-in amplitude 20 mV and frequency 817 Hz.

Figure S3. a) Sketch of the junction with highlighted atoms whose PDOS is reported in b)-g). b)-g): Orbital resolved PDOS on different carbon atoms along the junction.

Figure S4. Energy-resolved constant-current conductance maps acquired with CO-functionalized tip on the region of the aGNR-hGDY heterostructure reported in the inset of Figure 3a: (a) , (b) , (c) , (d) , (e) . STS set-point: , with lock-in amplitude and frequency .

Figure S5. Energy-resolved constant-current conductance maps acquired with CO-functionalized tip on the region of the aGNR-hGDY heterostructure reported in the inset of Figure 3a: (a) , (b) . STS set-point: , with lock-in amplitude and frequency .
Experimental maps acquired in the energy range between -1.7 V and -0.7 V (Figure S4), with the map in Figure 3e as a representative example at V, reveal the presence of -derived states on the hGDY network, providing experimental support for the theoretical prediction in Figure 2 that -derived states also contribute to its electronic structure. In the unoccupied part of the spectrum, states with the same characteristics as those at V and V are found respectively at V and V in the experiment, representing the symmetric counterpart of the interface state and manifold (Figure S5), as confirmed by the calculations (states at eV and eV in Figure 3b). As already noted, the theoretical PDOS also displays deeper unoccupied hGDY states near the Fermi level.
Effect of heterostructure on constituent–substrate coupling
Having characterized the electronic states associated with the covalent junction, we next examine whether the heterostructure formation modifies the interaction of aGNR and hGDY with Au(111).
The covalent HTS weakly perturbs the substrate, as indicated by the complete recovery of the Au(111) herringbone reconstruction following the hGDY conversion from the metalated to the covalent phase (Figure S6,Figure S6), also observed for isolated covalent hGDY [12]. Consistently, the Au(111) surface state onset beneath the HTS lies at −0.38 eV, only 0.07 eV above its position on pristine Au(111) (−0.45 eV) [16]. This shift is smaller than the 0.10 eV measured beneath isolated covalent hGDY [12], suggesting that heterostructure formation further attenuates substrate coupling. Substantially larger shifts occur beneath strongly interacting metalated – networks (Figure S6) [17–19].

Figure S6. Large-scale LT-STM images of (a) aGNRs and metalated hGDYs before their linking, (b) aGNRs and covalent hGDYs upon their linking. (c) Conductance spectra of the Au(111) surface state in the middle of the pore of the covalent heterojunction (C HJ, purple). Au(111) surface state in the middle of the pore of the metalated hGDY alone (M, grey) is reported as reference [4]. Dashed vertical lines correspond to the energy position of the Au(111) surface state, i.e., -0.38 V for the all-carbon heterojunction, and +0.4 V for the metalated hGDY alone, respectively. STM set-point: (a) -200mV/50pA, (b) -1V/10pA.
To disentangle the effects of lateral covalent coupling and substrate adsorption, we compare the electronic structures of the isolated constituents, the freestanding HTS and the corresponding Au-supported systems. The band structures of freestanding aGNR and hGDY (Figure 4a,Figure 4c) reveal their distinct work functions and band gaps, providing a reference for identifying the changes induced by heterojunction formation and interaction with Au(111).

Figure 4. a) Band structure of the freestanding aGNR in a supercell to match its periodicity in the HTS. b) Band structure of the freestanding aGNR-hGDY heterostructure. c) Band structure of the freestanding hGDY in the same oblique cell as in the HTS. d) Band structure of the HTS on Au(111). In red and blue the aGNR and hGDY contribution, respectively. e) Comparison between the PDOS of pristine hGDY/Au(111) and the PDOS of a hGDY unit cell in the central region of the HTS. f) Comparison between the PDOS of pristine aGNR/Au(111) and of an aGNR unit in HTS. g) Surface-averaged induced charge along the direction perpendicular to the HTS. h) Change of the local dipole density compared to the change in the energy gap. Red and blue refer to hGDY and aGNR, respectively.
Upon covalent coupling into the freestanding aGNR-hGDY heterostructure (Figure 4b), the common Fermi level shifts according to the new work function of the combined system, while the electronic manifolds of the two constituents remain largely preserved with a larger shift of the hGDY bands with respect to the common Fermi level, compared to aGNR. The band projection onto the aGNR and hGDY subunits (red and blue in Figure 4b, respectively), shows that the vast majority of the bands retain their original character. The only exception is the nearly flat interface band at -4.55 eV in Figure 4b (-1.15 eV from the Fermi level), which displays mixed aGNR–hGDY character, consistent with its localization at the covalent junction. The effect of the Au(111) substrate can be understood by considering the behaviour of the individual constituents on the surface. Isolated aGNR on Au(111) exhibits a predominantly p-type band alignment [15], whereas hGDY displays the opposite n-type character [12]. Upon adsorption of the heterostructure (Figure 4d) the bands shift to align with the Au(111) work function. The two constituent-derived manifolds remain clearly distinguishable, and qualitatively preserve their dispersion and the different Fermi-level alignment, indicating that the weak interaction with the substrate does not suppress the electronic identity of the individual subunits.
A more quantitative insight is obtained from the comparison between carbon-projected density of states calculated on hGDY and aGNR units in the HTS, 1 nm away from the covalent junction (Figure 4e,Figure 4f, blue and red lines, respectively), and the corresponding isolated systems adsorbed on Au(111) (Figure 4e,Figure 4f, cyan and orange lines, respectively). Remarkably, both the constituents exhibit a wider projected band gap within the heterostructure than when individually supported on Au. The recovery occurs through different band-edge shifts: in hGDY, the gap widens predominantly through an upward shift of the conduction-band edge, whereas in the aGNR it originates mainly from a downward displacement of the valence-band edge. Since these band edges are those most strongly perturbed by the Au substrate in the isolated systems, the observed behaviour suggests that the formation of the lateral heterostructure modifies the interaction of both constituents with Au(111), partially restoring a more freestanding-like electronic structure.
The gap increase can be related to the larger adsorption height of the carbon network above Au. In the heterostructure, hGDY lies approximately 0.2 Å farther from the substrate than isolated hGDY, whereas the change in the GNR height is smaller (0.1 Å). However, because the isolated GNR intrinsically prefers a larger adsorption distance than hGDY, the covalent junction forces the hGDY network to follow the higher equilibrium position imposed by the GNR. The slight additional lifting of the GNR may be related to the electronic reconstruction at the junction, where interface states mix with the GNR edge states and modify its interaction with Au.
Likewise, the amount of adsorption-induced integrated charge in the constituent regions away from the junction decreases moderately upon HTS formation (approximately 12% for hGDY and 10% for the aGNR). Further insight into the modified interaction with the substrate is provided by the spatially resolved adsorption-induced charge-density difference and local dipole density (see Methods). Figure 4g reports for the hGDY and aGNR regions when individually adsorbed on Au(111) (cyan and orange, respectively) and when incorporated into the heterostructure (blue and red, respectively), considering in the latter case regions sufficiently far from the covalent junction. Besides the substantially larger charge redistribution observed for the aGNR, the profiles show small shifts in the accumulation and depletion regions, particularly in the features associated with the carbon layer, consistently with the small changes in adsorption height upon HTS formation (position marked by vertical coloured dashed lines).
Upon incorporation into the HTS, the local dipole density decreases from to e/Å for hGDY and from to e/Å for aGNR, corresponding to reductions of 16% and 23%, respectively (Figure 4h). In both constituents, this attenuation accompanies partial gap recovery. The larger dipole reduction of the aGNR, despite its smaller vertical displacement, shows that interfacial polarization is not governed solely by adsorption height. Instead, it is consistent with the junction-induced redistribution of GNR-derived -state spectral weight across the covalent link and onto the first hGDY benzene ring, possibly reflecting an extension of the GNR aromaticity. The associated change in the overlap of edge-derived states with Au provides a plausible electronic contribution to the reduced GNR–Au polarization. For hGDY, the larger upward displacement provides a more direct structural mechanism for weaker Au coupling and gap widening.
Conclusions
In conclusion, we have demonstrated the atomically precise on-surface synthesis of the atomically precise all-carbon lateral heterojunction integrating carbon allotropes with fundamentally different bonding networks, namely an graphene nanoribbon and an – hydrogenated graphdiyne. The Fe-assisted synthetic strategy enables the formation of a fully covalent interface while preserving the structural order of both constituents. Low-temperature STM/STS combined with first-principles calculations reveals that the heterojunction is electronically abrupt at the atomic scale, with the interface extending less than 0.5 nm at the covalent link. The band alignment exhibits an asymmetric type-I character that may provide a route toward carrier-selective confinement in all-carbon heterojunctions. At the same time, the electronic identity of the two carbon allotropes remains well preserved away from the interface, with the direct hybridization restricted to the immediate vicinity of the junction. Remarkably, despite the highly localized nature of the electronic coupling, the formation of the heterostructure modifies the interaction of both constituents with the underlying Au(111) substrate. This results in a constituent-dependent reduction of the substrate-induced electronic renormalization and interfacial polarization, leading to a partial recovery of their intrinsic electronic structures while maintaining direct contact with the metallic support. The decoupling induced by the heterojunction formation should be regarded as an additional effect superimposed on the stronger decoupling already produced by the organometallic-to-covalent transformation of hGDY. Although smaller in magnitude, this additional reduction in substrate coupling is conceptually relevant because it affects both constituents and extends beyond the immediate junction region. Beyond the specific aGNR–hGDY system investigated here, this heterostructure provides a proof of concept for the atomically precise integration of other carbon allotropes with distinct bonding motifs and electronic properties using analogous on-surface synthetic strategies. More broadly, these findings establish lateral covalent heterostructuring as an effective approach not only for engineering electronic states at atomically precise carbon interfaces, but also for tailoring the interaction of distinct carbon allotropes with metallic substrates, opening new opportunities for the design of functional all-carbon quantum nanostructures.
Methods
Experiment
All the experiments were carried out under ultra-high vacuum conditions, with a base pressure below mbar. Single-crystal Au(111) (MaTeck GmbH) was employed for the on-surface synthesis, following several cleaning cycles of Ar sputtering and annealing at 770 K. Molecular precursors, i.e. 1,3,5-tri(bromoethynyl)benzene (tBEB), and 4,4″-dibromo-p-terphenyl (DBTP), were loaded in powder form in two separate Knudsen cells and were deposited on Au(111) by thermal evaporation, after calibration of the molecular flux with a quartz microbalance. The lateral heterostructure was obtained through the sequential deposition of DBTP and tBEB molecules on the Au(111) substrate, held at room temperature in front of the evaporator. To first obtain aGNRs, DBTP molecules were sublimated on Au(111) for 16 minutes, with a rate of about 0.025 ML/minute, keeping the crucible temperature set to 353 K, reaching a chamber pressure of mbar. Upon evaporation at RT, DBTP molecules form an ordered self-assembly of unreacted monomers stabilized by lateral hydrogen bonds between Br and H terminals [13]. It is known that the debromination of DBTP molecules occurs in the 360–400 K range, and Br desorption from Au(111) surface at about 650 K [13]. Upon annealing at 523 K for 30 minutes, poly(p-phenylene) (PPP) chains are formed [13]. Further annealing of the sample at 773 K for 30 minutes promotes the cyclodehydrogenation of PPP chains, and their coupling into aGNRs with polydisperse widths, from 3- to 6- and 9-aGNR, and interconnecting branches [11, 15]. tBEB molecules are evaporated for about 25 seconds over the obtained aGNR/Au(111) sample, keeping the crucible at 300 K, reaching a chamber pressure of mbar. Upon surface-catalyzed halogen cleavage, tBEB molecules undergo organometallic coupling reaction through the incorporation of gold adatoms from the substrate, generating metalated hGDY in between the nanoribbons [11, 18–22]. To improve the order of the hGDY, a mild annealing at about 400 K is performed. At this point, Fe atoms are evaporated on the obtained system through an e-beam evaporator equipped with an integral flux monitor. The sample is maintained at room temperature while Fe atoms are deposited on top, setting the emission current to 13.7 mA, the ion flux to 0.1 nA, and the deposition time to 80 seconds. A constant pressure of mbar during Fe evaporation ensures the cleanliness of the deposit, without contamination from the metallic rod. After Fe deposition, a progressive annealing of the system from 370 K to 610 K, with an increase in the set current of 0.2 A upon each 20-minute step, promotes the bonding between the covalent hGDY and the aGNRs. Low-temperature scanning tunneling microscopy and spectroscopy (LT-STM/STS) investigations were conducted at the Laboratorio de Microscopías Avanzadas of the Universidad de Zaragoza, with a Scienta Omicron microscope, cooled down to 4.8 K, using a W tip. LT-STS spectra and maps were obtained through a lock-in amplifier with an oscillation frequency of Hz and a modulation amplitude of mV. STM images were analysed using Gwyddion 2.63 [23]. The hGDY periodicity was determined from line profiles acquired over several LT-STM images and from the corresponding two-dimensional fast Fourier transforms. Junction yields and relative populations of the 90° and 60° configurations were obtained by statistical analysis of multiple STM images, as detailed in Supplementary Section S2. STS data were analysed using Igor Pro and SpectraFox.
Theory
Density functional theory (DFT) calculations were performed using the SIESTA code [24] that features a pseudopotential description of the electron–ion interaction and a localized atomic-orbital basis set. A mesh cutoff of 400 Ry was adopted, and exchange-correlation effects were treated within the GGA using the PBE functional [25]. The interaction between the covalent network and the Au substrate was described by including van der Waals corrections through the Grimme dispersion scheme (Grimme D3) [26].
The structural model of the heterostructure consists of one hGDY repeated unit (theoretical periodicity of 1.65 nm) matched to four aGNR unit cells (theoretical periodicity of 0.43 nm), resulting in an intrinsic lattice mismatch of approximately 5%. To achieve simultaneous epitaxial matching with the underlying Au(111) substrate, the common periodic direction of the hGDY and the aGNR was rotated by 8.81° with respect to the Au(111) [1̄10] direction and slightly rescaled to 1.66 nm. This introduces only 0.8% tensile strain in the hGDY and 4% compressive strain in the aGNR. The second lattice vector, running across the heterojunction, is oriented 5.12° away from the Au(111) [1̄12] direction and has a length of 49.21 Å, accommodating one 6-aGNR and two complete hexagonal units of the hGDY network. The resulting oblique supercell, characterized by an internal angle of , is fully commensurate with the Au(111) substrate and is described by the epitaxial matrix
Structural relaxation preserves the covalent architecture of the – heterojunction.
Brillouin-zone sampling was performed using a k-point mesh for the self-consistent calculations, while a five-times denser mesh was employed for the projected density of states (PDOS). The PDOS is calculated with a broadening of eV.
Simulated STM images were generated within the Tersoff-Hamann approximation [27], in both constant-height and constant-current modes, by integrating the electronic states over the energy interval .
The adsorption-induced charge-density difference was evaluated as
where is the charge density of the adsorbed carbon system (hGDY or aGNR) on Au, while and are the charge densities of the isolated carbon system and Au(111) substrate, respectively, evaluated in the same atomic geometries as in the adsorbed case.
We then calculated the laterally averaged ()
where denotes the selected constituent region and its lateral area of the unit cell. The effective local adsorption-induced dipole density was calculated as
where is the position of the topmost Au layer. The regions were selected sufficiently far from the covalent linking site to minimize the contribution of direct aGNR-hGDY hybridization.
Supporting Information available
Supporting information reports additional details abouth the synthesis process and the characterization of the electronic properties of the heterojunction.
Acknowledgments
A.C., A.L.B. and C.S.C acknowledge funding by: Funder: project funded under the National Recovery and Resilience Plan (NRRP), Mission 4 Component 2 Investment 1.3 - Call for tender No. 341 of 15.03.2022 of Ministero dell’Universitá e della Ricerca (MUR); funded by the European Union NextGenerationEU - Award Number: project code PE0000021, Concession Decree No. 1561 of 11.10.2022 adopted by Ministero dell’Universitá e della Ricerca (MUR), CUP D43C22003090001, Project title “Network 4 Energy Sustainable Transition NEST’ ’. F.S. acknowledges the financial support from the University of Padova through the grant P-DiSC#02BIRD2024-UNIPD VS-P-PyTM. J.L.C. and E.P.S. acknowledge financial support from the Spanish Ministry of Science and Innovation through the project PID2022 138750NB-C21 and “Severo Ochoa’’, Programme for Centres of Excellence in R&D CEX2023-001286-S funded by MCIN/AEI/ 10.13039/501100011033 and by ERDF “A way of making Europe’ ’), from the regional Governments of Aragon (E12_23R) and from the European Commission (project ULTIMATE-I, grant ID 101007825). J.L.C. and E.P.S. further acknowledge the use of Servicio General de Apoyo a la Investigación-SAI and the Laboratorio de Microscopías Avanzadas of the Universidad de Zaragoza. S.A. acknowledges the CINECA award under the ISCRA initiative, for the availability of high-performance computing resources and support, and the financial support from INFN (Progetto iniziativa specifica “TIME2QUEST”). A.O.B. acknowledges support from the Ministero dell’Università e della Ricerca (MUR) and the University of Pavia through the program “Dipartimenti di Eccellenza” 2023–2027. Mario C.G. Passeggi (Jr.) is acknowledged for contributing to the experiment and for the useful discussion.
Author contributions
A.C. conceptualized and conducted the STM/STS experiments, analyzed the corresponding data, and wrote the initial draft. M. A. performed the DFT calculations. A.C., E.P.S. and J.L.C. conducted LT-STM/STS experiments. A.O.B. synthesized the tBEB molecular precursor. G.C., P.D., F.T. contributed to preliminary on-surface synthesis experiments. J.L.C., F.S., A.L.B., C.S.C. contributed to the supervision and discussion of results. C.S.C. conceptualized the work. S.A. conceptualized and coordinated the theoretical modeling and related analysis and wrote the initial draft. All authors contributed to the revision and final discussion of the manuscript.
Competing interests
The authors declare no competing interests.
Supporting Information: Atomically abrupt carbon heterojunction preserving the electronic identity of constituent allotropes
Alice Cartoceti; Masoumeh Alihosseini; Gianni Conti; Eliecer Pelaez-Sifonte; Alessio Orbelli Biroli; Francesco Sedona; Paolo D’Agosta; Francesco Tumino; Andrea Li Bassi; Jorge Lobo-Checa; Carlo S. Casari; Simona Achilli
On-surface synthesis of aGNR-hGDY heterostructure
Figure S1 reports on the reaction steps of the Fe-catalyzed on-surface synthesis of lateral aGNR-hGDY all-carbon heterojunctions. The scheme of the reaction mechanism is reported in Figure S1, and, for each step, both large-scale and atomically-resolved LT-STM images are shown. As the first step, low-coverage ( ML) aGNRs are grown on Au(111) to serve as scaffolds for the growth of hGDYs. Once the aGNRs are obtained (see Methods), tBEB molecules are deposited on top, generating a metalated honeycomb-like network in between the nanoribbons [1, 2, 3] (Figure S1,Figure S1). To improve the order of the hGDY, a mild annealing at about 400 K is performed. As previously reported by our group [1], at this stage of the process, fewer Br atoms are found inside the pores of the metalated hGDY, while the majority is at the aGNRs-hGDY interface, forming complexes with Au adatoms terminating the metalated hGDY and, thus, preventing the formation of the hGDY–aGNR heterojunction (Figure S1,Figure S1). LT-STM high-resolution images revealed a periodicity of 2.02 0.09 nm for the metalated network. This value is in perfect agreement with our previous findings on the 1,3,5-tBEB-based hGDY network alone [3, 4].
The second step consists of the evaporation of Fe atoms ( ML) on the surface (see Methods for the details on the deposition parameters). Already at room temperature, Fe atoms coordinate all chemisorbed Br atoms into , observable as bright features mainly at the aGNR-hGDY interface, where the majority of Br atoms are found (Figure S1,Figure S1). In our recent work [4], we unveiled the reaction steps taking place during the hGDY Fe-catalyzed OSS, showing the crucial role played by in favouring the stripping of Au adatoms from the hGDY network at mild annealing conditions through the formation of Au-stabilized units [4]. Here, we indeed observe that during the third step, i.e., upon annealing the sample at 450 K, the complete removal of Au adatoms from the hGDY is achieved, establishing its metalated-to-covalent transition. The transition of the hGDY to the purely covalent phase is confirmed by the averaged periodicity extracted from line-profile measurements performed over LT-STM images of the covalent hGDY in several different regions of the sample, i.e. 1.58 0.05 nm, which matches the value obtained in our previous work [4]. However, at this stage of the process, the interface between the covalent hGDY and the aGNRs is still fully decorated by Au-stabilized units (Figure S1,Figure S1), preventing the aGNR-hGDY bonding.
Finally, the system is subjected to a double-step annealing, firstly at 530 K, i.e., the temperature setpoint for the formation of covalent links between the hGDY and aGNRs [1], and then 610 K, which, according to our recent work [4], promotes the complete removal of and the order of the covalent hGDY (Figure S1,Figure S1). Upon this thermal treatment, the removal of Au-stabilized units from the junction interface is obtained, together with the covalent junction formation between the hGDY and the aGNR. Based on our recent work on the synthesis of metalated aGNR-hGDY heterojunctions [1], the mechanism of formation of the covalent link between the aGNRs and the metalated hGDY is based on the thermally-activated breaking of the C-Au bond terminating the diacetylenic group of the metalated hGDY facing the nanoribbon. Following the same reasoning, upon annealing at 610 K, the removal of the Au-stabilized units present at the aGNR-hGDY interface results in the formation of the all-carbon sp-sp aGNR-hGDY heterojunction (Figure S1,Figure S1).
Linking efficiency and configurations between hGDY and aGNRs
The aGNR-hGDY junction formation efficiency corresponds to the number of junctions effectively formed over the number of “possible” junctions, i.e., those where the hGDY termination is directly facing the aGNR edge. It was obtained considering 28 different regions of the all-carbon aGNR-hGDY samples upon annealing at 610 K. In the following, for each of the analyzed images, the total number of formed junctions is reported, discriminating between the - and the -configuration, schematized below.
Most junctions () adopt a configuration in which the hGDY acetylene units are oriented at to the nanoribbon axis, whereas the remaining are oriented at . This selectivity, which is more pronounced than in the corresponding organometallic heterostructure, likely reflects the geometrical constraints of the cycloaddition mechanism and the lower interfacial strain of the configuration. The error bar is obtained as the standard error of the binomial distribution:

Figure S2. (a) LT-STM image of 3aGNR-hGDY heterojunction. Orange circles exemplify the 60°-type junction, while green circles the 90°-type junction. STM set-point: -20mV/80pA. (b) and (c) Ball-and-stick atomic model of the 90°- and 60°-type configurations.
| Total possible linking sites | Formed links | N. 90° links | N. 60° links | Linking efficiency | Efficiency 90° links | Efficiency 60° links | |
| Image #1 | 10 | 10 | 10 | 0 | 100% | 100% | 0% |
| Image #2 | 20 | 18 | 16 | 2 | 90% | 88.89% | 11.11% |
| Image #3 | 7 | 7 | 7 | 0 | 100% | 100% | 0% |
| Image #4 | 20 | 20 | 19 | 1 | 100% | 95% | 5% |
| Image #5 | 12 | 12 | 9 | 3 | 100% | 75% | 25% |
| Image #6 | 7 | 7 | 5 | 2 | 100% | 71.43% | 28.57% |
| Image #7 | 14 | 14 | 13 | 1 | 100% | 92.86% | 7.14% |
| Image #8 | 16 | 16 | 14 | 2 | 100% | 87.50% | 12.50% |
| Image #9 | 13 | 13 | 8 | 5 | 100% | 61.54% | 38.46% |
| Image #10 | 19 | 17 | 14 | 3 | 89.47% | 82.35% | 17.65% |
| Image #11 | 8 | 8 | 6 | 2 | 100% | 75% | 25% |
| Image #12 | 15 | 15 | 10 | 5 | 100% | 66.67% | 33.33% |
| Image #13 | 10 | 10 | 10 | 0 | 100% | 100% | 0% |
| Image #14 | 7 | 7 | 7 | 0 | 100% | 100% | 0% |
| Image #15 | 7 | 7 | 6 | 1 | 100% | 85.71% | 14.28% |
| Image #16 | 12 | 12 | 12 | 0 | 100% | 100% | 0% |
| Image #17 | 7 | 7 | 7 | 0 | 100% | 100% | 0% |
| Image #18 | 8 | 8 | 8 | 0 | 100% | 100% | 0% |
| Image #19 | 20 | 18 | 11 | 7 | 90% | 61.11% | 38.89% |
| Image #20 | 5 | 5 | 5 | 0 | 100% | 100% | 0% |
| Image #21 | 6 | 6 | 3 | 3 | 100% | 50% | 50% |
| Image #22 | 4 | 4 | 4 | 0 | 100% | 100% | 0% |
| Image #23 | 16 | 15 | 10 | 5 | 93.75% | 66.67% | 33.33% |
| Image #24 | 9 | 9 | 9 | 0 | 100% | 100% | 0% |
| Image #25 | 5 | 5 | 5 | 0 | 100% | 100% | 0% |
| Image #26 | 11 | 10 | 8 | 2 | 91% | 80% | 20% |
| Image #27 | 24 | 24 | 22 | 2 | 100% | 91.67% | 8.33% |
| Image #28 | 5 | 5 | 5 | 0 | 100% | 100% | 0% |
| TOT | 317 | 309 | 263 | 46 | 97.47% | 85.11% | 14.89% |
Table 1.
Overall, 309 junctions have been considered, of which 263 are 90° type and 46 are 60° type, resulting in a overall linking efficiency of 97.47 ± 0.88%, and, specifically, of 85.11 ± 2.02% for the 90° type linkage and 14.89 ± 2.00% for the 60° type linkage.
Orbital-resolved PDOS
Constant-current maps
Decoupling from the surface
Upon the tBEB molecules’ evaporation on the aGNR/Au(111) sample and the formation of the metalated hGDY in between the nanoribbons, the Au(111) herringbone reconstruction is distorted as a consequence of both the involvement of surface adatoms in the formation of the GDY and the presence of the Br overlayer [5, 6] (Figure S6). Upon the complete demetalation of the hGDY at 450 K and the final double-step annealing at 530 K and 610 K, which allows the complete removal of the FeBr reaction byproducts, the herringbone is completely restored (Figure S6).
On the pristine surface, Au(111) SS is located at about -0.45 eV [7], and it is only slightly shifted to -0.38 eV in the presence of the Fe-catalyzed all-carbon heterojunction (Figure S6, purple line), indicating their minimal interaction. The figure also reports, as a reference, the spectrum of the metalated hGDY alone on Au(111) [4], where the Au(111) surface state is instead hugely shifted in energy (up to 0.4 eV) as a consequence of the strong interaction with the metalated network [2, 8, 9].
References
- [1]Alice Cartoceti, Simona Achilli, Masoumeh Alihosseini, Adriana E Candia, Enrico Beltrami, Paolo D’Agosta, Alessio Orbelli Biroli, Francesco Sedona, Andrea Li Bassi, Jorge Lobo Checa, et al. 2d abrupt nano-junctions blending sp–sp2 bonds on atomically precise heterostructures. Advanced Materials, 38(59):e74740, 2026.
- [2]Paolo D’Agosta, Simona Achilli, Francesco Tumino, Alessio Orbelli Biroli, Giovanni Di Santo, Luca Petaccia, Giovanni Onida, Andrea Li Bassi, Jorge Lobo-Checa, and Carlo S Casari. Unraveling the band structure and orbital character of a π-conjugated 2d graphdiyne-based organometallic network. Small, 21(10):2406533, 2025.DOI
- [3]Andi Rabia, Francesco Tumino, Alberto Milani, Valeria Russo, Andrea Li Bassi, Nicoló Bassi, Andrea Lucotti, Simona Achilli, Guido Fratesi, Nicola Manini, et al. Structural, electronic, and vibrational properties of a two-dimensional graphdiyne-like carbon nanonetwork synthesized on au (111): implications for the engineering of sp-sp2 carbon nanostructures. ACS applied nano materials, 3(12):12178–12187, 2020.DOI
- [4]Alice Cartoceti, Simona Achilli, Gianni Conti, Eliecer Pelaez-Sifonte, Alessio Orbelli Biroli, Francesco Sedona, Paolo D’Agosta, Francesco Tumino, Andrea Li Bassi, Jorge Lobo-Checa, et al. Iron-catalysed on-surface synthesis of substrate-decoupled graphdiyne monolayers. arXiv preprint arXiv:2606.06992, 2026.arxiv.org/abs/2606.06992
- [5]Andrea Basagni, Francesco Sedona, Carlo A Pignedoli, Mattia Cattelan, Louis Nicolas, Maurizio Casarin, and Mauro Sambi. Molecules–oligomers–nanowires–graphene nanoribbons: a bottom-up stepwise on-surface covalent synthesis preserving long-range order. Journal of the American Chemical Society, 137(5):1802–1808, 2015.DOI
- [6]Alice Cartoceti, Simona Achilli, Paolo D’Agosta, Francesco Tumino, Shreya Garg, Alessio Orbelli Biroli, Giovanni Onida, Guido Fratesi, Valeria Russo, Andrea Li Bassi, et al. Surface dependent organometallic to covalent transition in graphdiyne molecular wires. Nanoscale, 2025.DOI
- [7]Thomas Andreev, Ingo Barke, and Heinz Hövel. Adsorbed rare-gas layers on Au(111): Shift of the Shockley surface state studied with ultraviolet photoelectron spectroscopy and scanning tunneling spectroscopy. Phys. Rev. B, 70(20):205426, 2004.DOI
- [8]Xuechao Li, Haitao Ge, Yixuan Gao, Fangyu Yang, Faming Kang, Renjie Xue, Linghao Yan, Shixuan Du, Wei Xu, Haiming Zhang, et al. Scanning tunneling spectroscopy investigation of au-bis-acetylide networks on Au(111): The influence of metal–organic hybridization. J. Phys. Chem. Lett., 15(17):4593–4601, 2024.DOI
- [9]Zechao Yang, Tim Sander, Julian Gebhardt, Tobias A Schaub, Jorg Schonamsgruber, Himadri R Soni, Andreas Gorling, Milan Kivala, and Sabine Maier. Metalated graphyne-based networks as two-dimensional materials: crystallization, topological defects, delocalized electronic states, and site-specific doping. ACS nano, 14(12):16887–16896, 2020.DOI