betaFeedback

WorksMathematics

Parameter-robust preconditioners for a stabilized control-volume discretization of Biot's equations

Abstract

We develop and analyze parameter-robust block preconditioners for a stabilized control-volume discretization of the quasi-static Biot equations. Beginning with a five-field formulation, we eliminate the poroelastic stress and time-scaled Darcy velocity through independent vertex-local solves, obtaining a symmetric cell-centered displacement–rotation–pressure system. A macrocell rotation-jump term stabilizes the weak-symmetry constraint. We prove the well-posedness of the fully discrete scheme and show that the condensed, coupled displacement–rotation mechanics block is uniformly spectrally equivalent to its block-diagonal counterpart. For uncoupled preconditioners, we derive an exact discrete pressure-control criterion and a sufficient parameter condition that accommodates the scaling c0≍Kdr−1c_0\asymp K_{\rm dr}^{-1}, thereby allowing the storage coefficient to vanish in the nearly incompressible limit. We then construct a Schur-consistent pressure block that approximates the mechanics-induced pressure correction and prove its uniform equivalence to the exact pressure Schur complement. These results yield parameter-independent spectral bounds for block-diagonal preconditioning and weighted field-of-values estimates for lower-triangular preconditioning. Practical realizations employ a macrocell mass-matrix approximation for the stabilized rotation block and tailored two-grid solvers for the displacement and pressure blocks. Numerical experiments verify the expected convergence behavior in two dimensions and demonstrate robust performance under mesh refinement and broad variations of the physical parameters in both two and three dimensions.

Department of Mathematics, City University of Hong Kong, Kowloon Tong, Hong Kong SAR, China. Email: [email protected].

Corresponding author. Department of Mathematics, City University of Hong Kong, Kowloon Tong, Hong Kong SAR, China. Email: [email protected]. L. Zhao is partially supported by Research Grants Council of the Hong Kong Special Administrative Region, China (Project No. CityU 11302424, CityU 11303225) and Young Scientists fund, NSFC (Project No. 12401543).

Introduction

The quasi-static Biot model couples porous-solid deformation and pore-fluid flow, with applications in geomechanics and subsurface flow [10, 14]. Robust discretizations and solvers must handle nearly incompressible solids, small or vanishing storage, and weak Darcy control caused by low permeability or small time steps. These challenges motivate parameter-robust formulations and block preconditioners based on parameter-weighted norms [29, 27].

For Biot’s equations, existing discretizations include classical displacement–pressure formulations [30, 3], locking-free total-pressure formulations [33, 27], and fully mixed formulations retaining stress and Darcy velocity [25, 6]. The latter directly approximate both fields and, with suitable H(div⁡)H(\operatorname{div})-conforming spaces, preserve local momentum and mass balances. For plane elasticity, Arnold et al. [7] established mixed finite element error estimates uniform with respect to compressibility, including the incompressible limit. Weak stress symmetry is imposed through a rotation multiplier [8]. Before condensation, fully mixed formulations lead to large four- or five-field saddle-point systems. Local condensation and hybridization reduce the globally coupled unknowns while retaining conservation properties [32, 24].

Multipoint flux and stress methods solve local systems on interaction regions formed by cells or subcells sharing a mesh vertex [1, 36, 4, 5]. In these multipoint mixed finite element methods, vertex quadrature produces block-diagonal flux or stress matrices, enabling local elimination around each vertex. The closely related coupled multipoint stress–multipoint flux mixed finite element method for Biot’s equations [6] uses lowest-order BDM stress and Darcy velocity, cellwise constant displacement and pressure, and continuous piecewise linear or bilinear rotations. Quadrature of the velocity, stress, and stress–rotation forms permits local elimination of stress and Darcy velocity followed by rotation, yielding a cell-centered displacement–pressure matrix that is block-skew-symmetric and positive definite. Fu and Zhao [17] instead developed a locking-free control-volume method for elasticity on quadrilateral grids, with local momentum conservation and piecewise constant stress, displacement, and rotation that simplify implementation. Their stress space localizes the compliance form to vertex interaction regions by construction, eliminating the need for vertex quadrature; in the macrocell-rotation variant, the globally coupled unknowns are the cell-centered displacement and rotation. We extend this variant to Biot’s equations using the same subcell-wise constant normal-flux space for stress rows and Darcy velocity, and macrocell-wise constant displacement, rotation, and pressure. The stress and scaled Darcy blocks are block diagonal over vertex interaction regions by construction and are eliminated independently, yielding a symmetric displacement–rotation–pressure system. A macrocell rotation-jump stabilization acts only in the weak-symmetry equation, preserving local momentum and mass balances.

Parameter-robust block preconditioners for Biot systems have been developed primarily within the operator-preconditioning framework and through closely related norm-based approaches. Operator preconditioning equips the underlying product space with parameter-weighted norms for which the variational operator satisfies parameter-independent continuity and inf–sup estimates. The inverse Riesz map associated with these norms, or a uniformly spectrally equivalent approximation, then defines a robust preconditioner [21, 29]. This framework has been applied to total-pressure formulations [27, 26] and to conservative four-field total-pressure formulations [11]. Causemann and Kuchta [12] developed a scalable, parameter-robust solver for cell-by-cell poroelasticity based on norm-equivalent preconditioning and algebraic multigrid approximations of the diagonal blocks. Related norm-based constructions have been proposed for classical two- and three-field formulations [13], stabilized discretizations [2], and hybridized systems [24, 20]. Huang and Wang [22] introduced parameter-robust block-triangular preconditioners for two- and three-field poroelasticity formulations that avoid the explicit construction of a Schur complement. For statically condensed systems, robustness must be established for the reduced operator itself: one may reduce a full-system preconditioner under suitable uniform conditions [19, 20] or approximate the condensed blocks directly [16]. We adopt the latter approach for the reduced displacement–rotation–pressure system. Exact Schur factorizations provide the algebraic benchmark for the mechanics-induced pressure correction, while weighted field-of-values (FOV) estimates are used to analyze the nonsymmetric triangularly preconditioned operators [31, 23, 28].

Two issues must be resolved to construct robust preconditioners for the condensed system. First, separating displacement and rotation makes mechanics solves cheaper, but the compliance operator loses uniform coercivity on spherical stresses near incompressibility; uniform control of the displacement–rotation coupling is therefore needed. Second, when storage and Darcy control are weak, the natural pressure block may fail to control the mechanics–pressure coupling. The pressure-control criterion for an uncoupled strategy must therefore account jointly for storage, residual compliance, and Darcy contributions, with a bound independent of the mesh size and physical parameters. At zero storage, this strategy remains valid only if the natural pressure block is positive definite and the criterion holds uniformly. A Schur-consistent alternative approximates the mechanics-induced pressure correction explicitly. Our analysis distinguishes these strategies and their applicable parameter regimes. The main contributions are summarized as follows.

  • (i) We establish the well-posedness of the proposed fully discrete control-volume scheme for the Biot model using inf–sup estimates for stabilized linear elasticity and Darcy flow. Notably, the rotation-jump stabilization added to the weak-symmetry equation enables the elasticity inf–sup estimate and yields a condensed rotation block uniformly spectrally equivalent to a μ\mu-scaled mass matrix.

  • (ii) We prove spectral equivalence between the coupled displacement–rotation block and its block-diagonal part. For uncoupled preconditioners, we establish an exact discrete pressure-control criterion admitting c0≍Kdr−1c_0 \asymp K_{\mathrm{dr}}^{-1}, so storage may vanish as λ→∞\lambda\to\infty.

  • (iii) We construct a computable Schur-consistent pressure block and prove its uniform spectral equivalence to the exact pressure Schur complement, yielding parameter-independent spectral bounds for block-diagonal preconditioning. We also establish uniform weighted FOV bounds for the exact and Schur-consistent lower-triangular preconditioners.

  • (iv) We develop tailored two-grid solvers for the displacement and pressure blocks and use an inexpensive mass matrix to approximate the rotation block. Experiments in 2D and 3D assess parameter robustness and computational cost.

The remainder of the paper is organized as follows. Section 2 presents the Biot model, introduces the control-volume discretization and proves well-posedness of the fully discrete scheme. Section 3 establishes the mechanics-block equivalence, analyzes the uncoupled block preconditioners, and develops the Schur-consistent block-diagonal and lower-triangular preconditioners together with their spectral and FOV estimates. Section 4 reports the numerical experiments, and Section 5 gives the conclusions.

The control-volume discretization for the Biot model.

The mathematical model.

Let d∈{2,3}d \in\{2,3\}, and let Ω⊂Rd\Omega\subset\mathbb{R}^{d} be a bounded polygonal domain for d=2d=2 or a bounded polyhedral domain for d=3d=3. We denote by (⋅,⋅)D(\cdot,\cdot)_D the L2(D)L^2(D) inner product and write (⋅,⋅):=(⋅,⋅)Ω(\cdot,\cdot):=(\cdot,\cdot)_\Omega. Boldface denotes vectors, and underlined symbols denote matrix-valued quantities. Let σ‾e\underline{\sigma}_e, uu, zz, and pp denote the elastic stress, displacement, Darcy velocity, and pore pressure. The constitutive law is

Aσ‾e=ε(u),ε(u):=12(∇u+∇uT).(1)\mathcal{A}\underline{\sigma}_e=\varepsilon(u),\qquad\varepsilon(u):=\frac{1}{2}\left(\nabla u+\nabla u^{\mathsf T}\right). \tag*{(1)}

For homogeneous isotropic elasticity, the compliance operator is

Aτ‾=12μ(τ‾−λ2μ+dλtr⁡(τ‾)I),μ≥μmin⁡>0,λ≥0.(2)\mathcal{A}\underline{\tau}=\frac{1}{2\mu}\left(\underline{\tau}-\frac{\lambda}{2\mu+d\lambda}\operatorname{tr}(\underline{\tau})I\right),\qquad\mu\geq\mu_{\min}>0,\qquad\lambda\geq0. \tag*{(2)}

Here λ\lambda and μ\mu are the Lamé parameters describing volumetric and shear stiffness, respectively. The total poroelastic stress is

σ‾=σ‾e−αBpI,0<αB≤1.(3)\underline{\sigma}=\underline{\sigma}_e-\alpha_B pI,\qquad0<\alpha_B\leq1. \tag*{(3)}

The Biot–Willis coefficient αB\alpha_B measures the coupling between pore pressure and stress. Given a body force ff and a fluid source qq, the quasi-static Biot system reads

−div⁡σ‾=fin Ω×(0,T],K−1z+∇p=0in Ω×(0,T],∂t(c0p+αB∇⋅u)+∇⋅z=qin Ω×(0,T].\begin{aligned} -\operatorname{div}\underline{\sigma}&=f &&\text{in }\Omega\times(0,T],\\ K^{-1}z+\nabla p&=0 &&\text{in }\Omega\times(0,T],\\ \partial_t(c_0p+\alpha_B\nabla\cdot u)+\nabla\cdot z&=q &&\text{in }\Omega\times(0,T]. \end{aligned}

Here c0≥0c_0 \ge0 is the storage coefficient, and the hydraulic mobility tensor KK is symmetric and uniformly positive definite, with K1∣ξ∣2≤K(x)ξ⋅ξ≤K2∣ξ∣2K_1|\boldsymbol{\xi}|^2 \le K(x)\boldsymbol{\xi}\cdot\boldsymbol{\xi} \le K_2|\boldsymbol{\xi}|^2 for a.e. x∈Ωx \in\Omega and all ξ∈Rd\boldsymbol{\xi} \in\mathbb{R}^d, where 0<K1≤K20 < K_1 \le K_2. We impose homogeneous displacement and pressure boundary conditions and prescribe p(0)=p0p(0)=p^0.

To impose stress symmetry weakly, let md=d(d−1)/2m_d=d(d-1)/2 and introduce the rotation variable γ∈Rmd\gamma\in\mathbb{R}^{m_d}. For d=2d=2, γ=12rot⁡(u)\gamma=\frac{1}{2}\operatorname{rot}(\boldsymbol{u}) and as⁡(τ)=τ21−τ12\operatorname{as}(\boldsymbol{\tau})=\tau_{21}-\tau_{12}, whereas for d=3d=3, γ=12curl⁡(u)\gamma=\frac{1}{2}\operatorname{curl}(\boldsymbol{u}) and as⁡(τ)=(τ32−τ23,τ13−τ31,τ21−τ12)T\operatorname{as}(\boldsymbol{\tau})=(\tau_{32}-\tau_{23},\tau_{13}-\tau_{31},\tau_{21}-\tau_{12})^{\mathsf{T}}. Using {(2.1)–(2.3)} and ∇⋅u=tr⁡A(σ+αBpI)\nabla\cdot\boldsymbol{u}=\operatorname{tr}\mathcal{A}(\boldsymbol{\sigma}+\alpha_BpI), we obtain the following weakly symmetric five-field formulation: Find σ∈C([0,T];L2(Ω)d×d)\boldsymbol{\sigma}\in C([0,T];L^2(\Omega)^{d\times d}), u∈C([0,T];H01(Ω)d)\boldsymbol{u}\in C([0,T];H_0^1(\Omega)^d), γ∈C([0,T];L2(Ω)md)\gamma\in C([0,T];L^2(\Omega)^{m_d}), z∈C([0,T];L2(Ω)d)\boldsymbol{z}\in C([0,T];L^2(\Omega)^d), and p∈C([0,T];H01(Ω))p\in C([0,T];H_0^1(\Omega)) such that, for all (ψ,v,η,ξ,w)∈L2(Ω)d×d×H01(Ω)d×L2(Ω)md×L2(Ω)d×H01(Ω)(\boldsymbol{\psi},\boldsymbol{v},\boldsymbol{\eta},\boldsymbol{\xi},w)\in L^2(\Omega)^{d\times d}\times H_0^1(\Omega)^d\times L^2(\Omega)^{m_d}\times L^2(\Omega)^d\times H_0^1(\Omega),

(A(σ+αBpI),ψ)−(∇u,ψ)+(γ,as⁡(ψ))=0,(\mathcal{A}(\boldsymbol{\sigma}+\alpha_BpI),\boldsymbol{\psi})-(\nabla\boldsymbol{u},\boldsymbol{\psi})+(\gamma,\operatorname{as}(\boldsymbol{\psi}))=0,
(σ,∇v)=(f,v),(\boldsymbol{\sigma},\nabla\boldsymbol{v})=(\boldsymbol{f},\boldsymbol{v}),
(as⁡(σ),η)=0,(\operatorname{as}(\boldsymbol{\sigma}),\boldsymbol{\eta})=0,
(K−1z,ξ)+(∇p,ξ)=0,(K^{-1}\boldsymbol{z},\boldsymbol{\xi})+(\nabla p,\boldsymbol{\xi})=0,

References

  1. [1]I. Aavatsmark, An introduction to multipoint flux approximations for quadrilateral grids, Comput. Geosci., 6 (2002), pp. 405–432.DOI
  2. [2]J. H. Adler, F. J. Gaspar, X. Hu, P. Ohm, C. Rodrigo, and L. T. Zikatanov, Robust preconditioners for a new stabilized discretization of the poroelastic equations, SIAM J. Sci. Comput., 42 (2020), pp. B761–B791.arxiv.org/abs/1905.10353
  3. [3]J. H. Adler, F. J. Gaspar, X. Hu, C. Rodrigo, and L. T. Zikatanov, Robust block preconditioners for Biot’s model, in Domain Decomposition Methods in Science and Engineering XXIV, Lecture Notes in Computational Science and Engineering, Springer International Publishing, 2018, pp. 3–16.arxiv.org/abs/1705.08842
  4. [4]I. Ambartsumyan, E. Khattatov, J. M. Nordbotten, and I. Yotov, A multipoint stress mixed finite element method for elasticity on symmetrical grids, SIAM J. Numer. Anal., 58 (2020), pp. 630–656.
  5. [5]I. Ambartsumyan, E. Khattatov, J. M. Nordbotten, and I. Yotov, A multipoint stress mixed finite element method for elasticity on quadrilateral grids, Numer. Methods Partial Differential Equations, 37 (2021), pp. 1886–1915.arxiv.org/abs/1811.01928
  6. [6]I. Ambartsumyan, E. Khattatov, J. M. Nordbotten, and I. Yotov, A coupled multipoint stress–multipoint flux mixed finite element method for the Biot system of poroelasticity, Comput. Methods Appl. Mech. Engrg., 372 (2020), p. 113407.DOI
  7. [7]D. N. Arnold, J. Douglas, Jr., and C. P. Gupta, A family of higher order mixed finite element methods for plane elasticity, Numer. Math., 45 (1984), pp. 1–22.DOI
  8. [8]D. N. Arnold, R. S. Falk, and R. Winther, Mixed finite element methods for linear elasticity with weakly imposed symmetry, Math. Comp., 76 (2007), pp. 1699–1723.
  9. [9]C. Bernardi and V. Girault, A local regularization operator for triangular and quadrilateral finite elements, SIAM Journal on Numerical Analysis, 35 (1998), pp. 1893–1916.DOI
  10. [10]M. A. Biot, General theory of three-dimensional consolidation, J. Appl. Phys., 12 (1941), pp. 155–164.DOI
  11. [11]W. M. Boon, M. Kuchta, K.-A. Mardal, and R. Ruiz-Baier, Robust preconditioners for perturbed saddle-point problems and conservative discretizations of Biot’s equations utilizing total pressure, SIAM J. Sci. Comput., 43 (2021), pp. B961–B983.
  12. [12]M. Causemann and M. Kuchta, Parameter-robust preconditioners for a cell-by-cell poroelasticity model with interface coupling, SIAM J. Sci. Comput., 48 (2026), pp. B725–B750.arxiv.org/abs/2505.19157
  13. [13]S. Chen, Q. Hong, J. Xu, and K. Yang, Robust block preconditioners for poroelasticity, Comput. Methods Appl. Mech. Engrg., 369 (2020), p. 113229.DOI
  14. [14]O. Coussy, Poromechanics, John Wiley & Sons, 2004.
  15. [15]A. Ern and J.-L. Guermond, Finite element quasi-interpolation and best approximation, ESAIM: Mathematical Modelling and Numerical Analysis, 51 (2017), pp. 1367–1385.arxiv.org/abs/1505.06931
  16. [16]G. Fu and W. Kuang, Uniform block-diagonal preconditioners for divergence-conforming HDG methods for the generalized Stokes equations and the linear elasticity equations, IMA J. Numer. Anal., 43 (2023), pp. 1718–1741.DOI
  17. [17]S. Fu and L. Zhao, A novel multipoint stress control volume method for linear elasticity on quadrilateral grids, Commun. Comput. Phys., 38 (2025), pp. 285–316.arxiv.org/abs/2503.01426
  18. [18]F. J. Gaspar, F. J. Lisbona, and C. W. Osterteler, A stabilized difference scheme for deformable porous media and its numerical resolution by multigrid methods, Comput. Vis. Sci., 11 (2008), pp. 67–76.DOI
  19. [19]E. Henríquez, J. J. Lee, and S. Rhebergen, Parameter-robust preconditioning for hybridizable symmetric discretizations, SIAM J. Sci. Comput., 47 (2025), pp. A3212–A3238.
  20. [20]E. Henríquez, J. J. Lee, and S. Rhebergen, Preconditioning of a hybridizable discontinuous Galerkin method for Biot’s consolidation model, J. Sci. Comput., 109 (2026). Article 38.arxiv.org/abs/2508.12991
  21. [21]R. Hiptmair, Operator preconditioning, Comput. Math. Appl., 52 (2006), pp. 699–706.DOI
  22. [22]W. Huang and Z. Wang, Efficient parameter-robust preconditioners for linear poroelasticity and elasticity in the primal formulation, SIAM J. Sci. Comput., 48 (2026), pp. A1536–A1563.arxiv.org/abs/2506.21361
  23. [23]I. C. F. Ipsen, A note on preconditioning nonsymmetric matrices, SIAM J. Sci. Comput., 23 (2001), pp. 1050–1051.DOI
  24. [24]J. Kraus, P. L. Lederer, M. Lymbery, and J. Schöberl, Uniformly well-posed hybridized discontinuous Galerkin/hybrid mixed discretizations for Biot’s consolidation model, Comput. Methods Appl. Mech. Engrg., 384 (2021), p. 113991.DOI
  25. [25]J. J. Lee, Robust error analysis of coupled mixed methods for Biot’s consolidation model, J. Sci. Comput., 69 (2016), pp. 610–632.DOI
  26. [26]J. J. Lee, Analysis and preconditioning of parameter-robust finite element methods for Biot’s consolidation model, BIT Numer. Math., 63 (2023), p. 42.arxiv.org/abs/1806.11566
  27. [27]J. J. Lee, K.-A. Mardal, and R. Winther, Parameter-robust discretization and preconditioning of Biot’s consolidation model, SIAM J. Sci. Comput., 39 (2017), pp. A1–A24.arxiv.org/abs/1507.03199
  28. [28]D. Loghin and A. J. Wathen, Analysis of preconditioners for saddle-point problems, SIAM J. Sci. Comput., 25 (2004), pp. 2029–2049.DOI
  29. [29]K.-A. Mardal and R. Winther, Preconditioning discretizations of systems of partial differential equations, Numer. Linear Algebra Appl., 18 (2011), pp. 1–40.DOI
  30. [30]M. A. Murad and A. F. D. Loula, On stability and convergence of finite element approximations of Biot’s consolidation problem, Internat. J. Numer. Methods Engrg., 37 (1994), pp. 645–667.DOI
  31. [31]M. F. Murphy, G. H. Golub, and A. J. Wathen, A note on preconditioning for indefinite linear systems, SIAM J. Sci. Comput., 21 (2000), pp. 1969–1972.DOI
  32. [32]J. M. Nordbotten, Stable cell-centered finite volume discretization for Biot equations, SIAM J. Numer. Anal., 54 (2016), pp. 942–968.
  33. [33]R. Oyarzúa and R. Ruiz-Baier, Locking-free finite element methods for poroelasticity, SIAM J. Numer. Anal., 54 (2016), pp. 2951–2973.DOI
  34. [34]Á. Pé de la Riva, F. J. Gaspar, X. Hu, J. H. Adler, C. Rodrigo, and L. T. Zikatanov, Oscillation-free numerical schemes for Biot’s model and their iterative coupling solution, SIAM J. Sci. Comput., 47 (2025), pp. A1809–A1834.
  35. [35]L. R. Scott and S. Zhang, Finite element interpolation of nonsmooth functions satisfying boundary conditions, Mathematics of Computation, 54 (1990), pp. 483–493.DOI
  36. [36]M. F. Wheeler and I. Yotov, A multipoint flux mixed finite element method, SIAM J. Numer. Anal., 44 (2006), pp. 2082–2106.DOI

Paper details

vlnc:W_9ep7ehyn
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 2

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Mathematics

Not recorded for this paper

View statement
Looking for related papers…
Contents