WorksPhysics and Astronomy
Stable dissipative topological solitons in media with even-order dispersion
Abstract
The formation and dynamics of dissipative solitons are governed by the interplay of dispersion and nonlinearity, alongside the gain-loss balance. While it is known that dispersion orders beyond the conventional second order support stable solitons, the possibility of the creation of dissipative topological solitons in this setting was not explored. Here, we reveal a class of stable dissipative solitons enabled by the pure-high-even-order dispersion (PHEOD), with dispersion orders m=4, 6, 8, and 10. The resulting dissipative topological solitons (DTSs) and moving topological solitons (MTSs) are dark-type structures featuring a zero-amplitude point that separates two CW backgrounds with opposite signs. In particular, the PHEOD solitons feature oscillatory tails, which are not present in the conventional dark states. The linear-stability analysis confirms full robustness of the PHEOD-supported DTSs and MTSs. We also explore collision dynamics of MTSs, whose repulsive interactions are inelastic, leading either to rebound, accompanied by emission of dispersive radiation, or complete fusion. These findings establish PHEOD as a means for the generation of new species of dissipative solitons, and broaden the variety of nonlinear modes available to experimental studies in nonlinear optics.
© 2026 Optica Publishing Group
Introduction
Dissipative solitons are localized structures that emerge in driven nonconservative systems far from equilibrium. Unlike conservative solitons, whose formation relies on the balance between nonlinear effects and dispersion or diffraction, dissipative solitons rely upon the additional balance between gain and loss, which is necessary to compensate energy dissipation and sustain the localized modes under the action of the drive [1, 2]. The inclusion of the gain-loss balance makes dissipative solitons fixed-point (attractor) solutions of the corresponding complex Ginzburg-Landau equation (CGLE), in contrast to the standard nonlinear Schrödinger equation (NLSE) for conservative solitons [3], which exists in continuous families, rather than isolated attractors.
In nonlinear optics, CGLEs model a wide range of systems, including passively mode-locked lasers [4] and optical parametric oscillators [5, 6, 7, 8, 9]. Among these models, two generic types are directly forced CGLEs, alias Lugiato-Lefever equations [10], and parametrically-driven damped NLSEs, in which parametric forcing compensates linear losses [11, 12, 13, 14, 15, 16, 17, 18].
A broader class of localized nonlinear waves emerges when the dispersion is represented by a single pure-high-even-order dispersion (PHEOD) term, rather than the conventional second-order one. In this case, solitons arise from the balance between the nonlinear self-focusing and PHEOD, with pure-quartic solitons (PQSs) corresponding to the lowest-order member of the family. Dispersion engineering has provided experimental realization of PQSs in photonic-crystal waveguides and mode-locked laser systems employing intracavity spectral pulse shaping [19, 20, 21]. More recently, experiments have extended this concept to sixth-, eighth-, and tenth-order dispersion, producing the respective solitons [22]. PHEOD solitons have also been shown to form stable bound states, revealing increasingly complex localized-wave dynamics beyond the PQS regime [23, 24]. An important feature of this hierarchy is its specific energy scaling: for dispersion order , the soliton energy varies with the pulse duration as . This characteristic enables the PHEOD solitons to break the energy constraint inherent to conventional second-order-dispersion solitons.
The study of dissipative higher-order solitons has extended from PQSs to a broader class of PHEOD setups. PQSs exhibit relatively flat spectra and, as mentioned above, the favorable energy scaling, making them attractive for high-power ultrashort-pulse generation [25, 26, 27]. Dissipative PQSs have subsequently been demonstrated in microring resonators within the Lugiato–Lefever framework [28, 29], and their robustness against the Raman self-frequency shift has been explored [30, 31, 32]. Beyond the quartic dispersion, dissipative PHEOD solitons have been realized through the loss compensation provided by the ac or parametric drive [33, 34]. These advances establish PHEOD as a viable platform for the creation of dissipative solitons.
In this work, we investigate dissipative topological solitons supported by PHEOD. These states feature localized phase defects connecting two asymptotic continuous-wave (CW) backgrounds with a phase difference of [35]. The term “topological soliton” refers to this kink-like structure, following the terminology adopted in optics [36, 37, 38]. The linear-stability analysis and direct numerical simulations show that the topological PHEOD solitons remain completely stable throughout the parameter regions examined, indicating their strong intrinsic robustness. In addition to representing a new type of stable dissipative solitons, these modes may be potential candidates for optical telecommunications and data-processing schemes [39], as well as high-Q sources of soliton frequency combs [40].
The model and methods
We consider one-dimensional dissipative solitons in parametrically driven dispersive cavities with the Kerr nonlinearity [16, 17]. The evolution of the intracavity field envelope obeys NLSE containing the PHEOD term (we address the cases of ) [22, 23]. We establish a necessary theoretical model incorporating the PHEOD, Kerr nonlinearity, parametric driving and loss. The equation is written as
where the fast time denotes the retarded time in the reference frame moving at the group velocity, is the slow-time variable, and represents the cavity round-trip time. Furthermore, is the th-order dispersion coefficient, is the nonlinearity coefficient, denotes the cavity detuning, represents the strength of the parametric drive, and is the effective loss coefficient.
To obtain a dimensionless form of the governing equation, we introduce the following scaled variables and dimensionless parameters:
and
With these definitions, the governing equation can be recast into the normalized parametrically driven NLSE
where the scaled moving coordinate is used to accommodate moving solitons with velocity . Parameters and denote, respectively, the normalized cavity loss and parametric-drive amplitude, with standing for the complex conjugate. It is well known that parametrically driven systems with the second-order dispersion support bright dissipative solitons, a part of which may be stable [16, 17].
It is worth noting that, under the sign convention adopted here, all the considered cases correspond to negative high-even-order dispersion coefficients, , and the self-defocusing Kerr nonlinearity in Eq. (1). In Eq. (4), the alternating signs arise from the differential representation of the even-order dispersion, and do not indicate a change between anomalous and normal dispersion. Thus, all the cases share the same relative dispersion–nonlinearity sign supporting dark modes.
To obtain stationary profiles in the comoving frame, we seek solutions of Eq. (4) in the form of
where and denote the real and imaginary components of the stationary field. Substitution of Eq. (5) into Eq. (4) yields the coupled equations:
The stationary soliton profiles are obtained numerically by solving Eqs. (6) and (7) using a Newton–conjugate-gradient method [41, 42]. This approach allows both quiescent and moving localized states to be computed within the same stationary formulation, with corresponding to the quiescent limit.
To assess the linear stability of the resulting solutions, we introduce a small perturbation according to
where and are the real and imaginary components of the perturbation eigenmode, respectively, and is the associated eigenvalue. The real part determines the perturbation growth rate. Substitution of Eq. (8) into Eq. (4) and linearization about the stationary solution yield the eigenvalue problem
where
A localized solution is unstable if the linearized operator possesses at least one eigenvalue with ; otherwise, it is stable within the linear approximation. We compute the eigenvalue spectrum using a Fourier-collocation discretization [42], which transforms Eq. (9) into a finite-dimensional matrix eigenvalue problem for the Fourier coefficients of the perturbation modes and .
Results and discussion
To characterize the structure of the soliton solutions, we first analyze a pair of the underlying CW states, which Eq. (4) produces as
with
under the condition of . To test the CW states against plane-wave perturbations, we introduce perturbation amplitudes with real wavenumber and complex growth rate as
The linearization about with respect to yields the dispersion relation
the CW state being stable provided that condition holds for all real . Because Eq. (15) yields , the CW state is always unstable, while , which has , is stable.
A related analysis predicts the shape of tails of stationary solutions existing on top of the CW states, such as the dissipative topological solitons (DTSs) considered below. In this case, the ansatz is taken as , where is the small tail component (cf. the stationary version of Eq. (16), with ). Splitting and into real and imaginary parts, substituting this in Eqs. (6) and (7), linearizing the equations with respect to , and finally looking for the solutions as leads to the equation that determines the tail’s damping rate :
where and are defined as per Eq. (15). Although functions and are defined as real variables, complex solutions of Eq. (19) for make sense, predicting the possibility of oscillatory decaying tails (cf. [29]), as shown below in Figure 1.

Figure 1. The energy (22) of stationary DTS solutions, for varying values of the loss coefficient (attached as labels to the plotted branches) and PHEOD order , versus the parametric-drive’s strength . Panels (a)–(e) exhibit characteristic profiles of , produced, at fixed , for different values of . The insets present the comparison between the oscillatory decaying tails, as predicted by Eq. (19) and produced by the numerical DTS solutions (dotted and solid lines, respectively).
Stable dissipative topological solitons (DTSs)
We begin by considering the quiescent DTSs described by Eqs. (6) and (7) in the stationary limit, . In the conventional quadratic-dispersion case (), this solution recovers the familiar dark-soliton state [14]:
which exist under the above-mentioned condition, .
Our findings for DTS families are summarized in Figure 1(a$_Figure 1$)–Figure 1(e$_Figure 1$), by means of dependencies of the complementary power (similar to the total power of bright solitons),
on the drive’s strength , for several fixed values of the loss coefficients values (starting from ), and dispersion orders . The linear stability analysis confirms that all DTS solutions are stable.
Typical examples of their temporal profiles, found at fixed and various values of , are displayed in Figure 1(a$_Figure 2$)–Figure 1(e$_Figure 2, clearly exhibiting oscillatory decaying tails, which is consistent with previous results [22]. As mentioned above, the oscillatory decay corresponds to complex roots of Eq. (19), . In the case of , Eq. (19) amounts to the factorized form:

Figure 2. DTS solutions of Eqs. (6) and (7), with , varying with the drive’s strength and PHEOD order . Panels (a1)–(b1) and (a2)–(b2) trace the real and imaginary field components, and , as changes at fixed for and , respectively. Panels (a3)–(b3) and (a4)–(b4) display, respectively, the corresponding field’s modulus profiles and phase distributions of the DTSs.
The oscillatory decaying tails of the complex solutions of Eqs. (6) and (7) are determined by eigenvalues in the form of
where the constants , , , and are fitting parameters. The magnified view for , displayed in insets in Figure 1(a$_Figure 2$)–Figure 1(e$_Figure 2 demonstrates full agreement of the analytical prediction (24) with the numerical solution.
Furthermore, recent experiments have demonstrated the feasibility of engineering pure high-even-order dispersion in fiber lasers using the intracavity programmable spectral shaping [23]. Reported net cavity dispersion coefficients include , , , and . Using these dispersion magnitudes as benchmarks and taking a round-trip phase detuning as , the normalization gives characteristic time scales , 0.816, 0.519, and 0.377 ps for , 6, 8, and 10, respectively. For the stationary dark solitons with and , the corresponding dimensional widths are therefore , 1.7, 1.2, and 0.87 ps, respectively. These estimates illustrate the physical temporal scales of the predicted dark modes. Note that the reported solitons are domain walls connecting two opposite-phase CW backgrounds in an effectively infinite temporal domain. An isolated wall therefore does not satisfy ordinary periodic boundary conditions for the complex optical field. In a periodic cavity, a reversed-phase domain can instead be bounded by a pair of oppositely oriented walls, allowing the field to recover its initial complex amplitude after one round trip. When sufficiently separated, the individual walls may locally approximate the isolated solutions studied here, although the existence and stability of the complete periodic configuration require special verification. A promising implementation is a phase-stabilized, parametrically driven Kerr fiber cavity incorporating the programmable intracavity dispersion. Reported experiments have demonstrated these driving and dispersion-engineering capabilities, providing a basis for exploring the proposed dark-domain-wall regime.
Structural features of quiescent DTSs exhibit a pronounced dependence on the parametric-drive’s strength . For a fixed loss constant , Figure 2(aFigure 1–Figure 2(bFigure 1 and 2(a2)–2(b2) present the variation of the real and imaginary field components ( and ) as functions of . The corresponding field’s modulus profiles are displayed in Figure 2(aFigure 3–Figure 2(bFigure 3, which connect to the CW background at , provided that the above-mentioned condition, , holds. Phase distributions of DTSs are plotted in Figure 2(aFigure 4–Figure 2(bFigure 4, revealing that each DTS is formed by a pair of half-infinite CW states, with the phase shift between them, making it possible to identify the DTS as a topological soliton.

Figure 3. Evolution tests and linear-stability spectra for quiescent DTSs. For , , and , panel (a) shows the evolution of a DTS subjected to 10% random-amplitude noise; panel (b) tracks ; panel (c) gives the corresponding stability spectrum; and panel (d) compares the perturbed input with the profile at . Panels (e)–(h) present the analogous results for , , and .

Figure 4. MTS existence curves in the conservative limit, . Panels (a1)–(a4), corresponding to , and , plot the momentum [Eq. (26)] against velocity for several values of . Dashed vertical lines mark the two critical velocities and on the upper () branches. Panels (b1)–(b4) show representative modulus profiles at .
Topological solitons are robust states with a localized core, whose temporal profiles are governed by the interplay of the PHEOD and optical nonlinearity. To assess their stability, we performed direct propagation simulations with perturbed initial conditions, , where is the stationary soliton profile, , and are independent real random numbers uniformly distributed over at numerical-grid points. This perturbation introduces multiplicative amplitude noise with a relative amplitude of 10%, without imposing independent phase noise. Although the random factors are real, the additive field perturbation is, generally, complex because is complex, its real and imaginary components being multiplied by the same random factor. The propagation simulations, presented in Figure 3, provide direct numerical evidence of the robustness of the DTSs against the imposed amplitude perturbations. Panels 3(a) and 3(e) show that the solitons retain their shapes in the course of long evolution. The central amplitude , plotted in panels 3(b) and 3(f), quickly settles after the introduction of the perturbation. The spectra in panels 3(c) and 3(g), obtained from Eq. (9), are consistent with this behavior. The comparison of the initial and final profiles, displayed in panels 3(d) and 3(h), corroborate that perturbation-induced oscillations gradually decay, without destroying the DTS.
Stable moving topological solitons (MTSs)
The parametric-drive and PHEOD terms break the Galilean invariance of the NLSE [43], which makes the construction of moving solitons a nontrivial problem. To produce moving topological solitons solutions of Eq. (4), we here consider the lossless case (). In the case of the quadratic dispersion, Eqs. (6) and (7) for this conservative system give rise to the well-known family of dark-soliton solutions [14],
whose existence is restricted to .
Numerical solutions of Eqs. (6) and (7) yield the PHEOD-supported MTS families summarized in Figure 4. Panels 4(a1)–4(a4) represent these families, plotting the momentum as a function of . In the conservative limit considered here, both and the norm are conserved.
The existence diagrams for MTSs exhibit odd symmetry with respect to the velocity , revealing that MTSs exist only within a range , where is the critical velocity. Furthermore, each upper branch () features another critical velocity, , which defines the maximum speed of the retrograde motion of the MTSs on that branch. Table 1 reveals the variation of the critical velocities. Specifically, increases with the parametric-gain strength , and decreases as the PHEOD order rises. Further, representative field-modulus profiles of MTSs are presented in Figure 4(bFigure 1–Figure 4(bFigure 4. Figure 4(bFigure 1 and Figure 4(bFigure 2} show stationary MTSs at zero velocity (), while Figure 4(bFigure 3 and Figure 4(bFigure 4} represent MTSs propagating at the critical velocities and , respectively. The linear-stability analysis further confirms that all these MTS solutions are stable.
| , \ | 1/20 | 1/15 | 1/10 |
| 4 | -0.420(2.085), 1.081(4.778) | -0.369(2.023), 1.167(4.924) | -0.287(1.901), 1.312(5.244) |
| 6 | -0.436(2.045), 0.862(4.930) | -0.388(1.980), 0.941(5.068) | -0.310(1.877), 1.077(5.415) |
| 8 | -0.451(2.034), 0.772(5.292) | -0.404(2.009), 0.842(5.260) | -0.327(1.899), 0.965(5.427) |
| 10 | -0.464(1.945), 0.721(5.190) | -0.417(1.932), 0.787(5.243) | -0.339(1.891), 0.902(5.292) |
Table 1. The critical velocities and of the upper MTS branches () in Figs. (4)(a1-a4), for different values of the parametric-gain strength and PHEOD orders .
Figure 5 summarizes how the MTS structure changes with momentum and PHEOD order . At a fixed parametric-gain strength , the evolution of the real and imaginary components ( and ) with is shown in Figure 5(aFigure 1–Figure 5(bFigure 1 and Figure 5(aFigure 2–Figure 5(bFigure 2. The associated field-modulus profiles are displayed in Figure 5(aFigure 3–Figure 5(bFigure 3, which asymptotically merge with the CW background (). Distinct from DTSs, the oscillatory tails of MTSs are modulated both by PHEOD order and soliton’s momentum , with the modulation amplitude rising with and . Furthermore, as approaches its maximum value, corresponding to the critical velocity , the region around the central point no longer retains the central dip, inherent to conventional dark solitons, with a bubble-like structural feature emerging instead. The corresponding phase distributions of the MTSs are presented in Figure 5(aFigure 4–Figure 5(bFigure 4, confirming that the MTSs arise from two half-infinite CW states separated by the phase shift.

Figure 5. Dependence of MTS profiles on momentum and dispersion order at fixed . For and , panels (a1), (b1) and (a2), (b2) display and , respectively. The associated modulus and phase profiles are presented in panels (a3)–(b3) and (a4)–(b4).
The typical dynamical behavior of the MTSs is displayed in Figure 6. The trajectories in Figure 6(aFigure 1, Figure 6(bFigure 1, and Figure 6(cFigure 1} show that the MTS profiles remain essentially unchanged up to . The comparison between Figure 6(aFigure 1 and Figure 6(bFigure 1} demonstrates that two MTSs with opposite velocities undergo counterpropagating evolution. As illustrated in 6(c1), the value of determines the drift speed of each soliton. The spectra in Figure 6(aFigure 2, Figure 6(bFigure 2, and Figure 6(cFigure 2, obtained from Eq. (9), are consistent with the stability for all three examples. Figure 6(aFigure 3, Figure 6(bFigure 3, and Figure 6(cFigure 3} compare the initial shapes of the perturbed soliton and final ones, produced by the extended evolution, further validating the robustness of the MTSs.

Figure 6. The evolution and linear-stability spectra of MTSs for and . The stable evolution of the MTSs subjected to 10% random-amplitude noise for different soliton’s velocities and momenta: (a) and ; (b) and ; (c) and . Panels (a), (b), and (c) give the associated stability spectra, while panels (a), (b), and (c) compare the perturbed input profiles with those obtained at .
Finally, to explore interactions between MTSs, we construct the initial field profile for the head-on collision, as , where the two solitons have opposite velocities, . Figure 7(aFigure 1} illustrates the repulsive soliton-soliton interaction, featuring rebound and emergence of pronounced amplitude oscillations, alongside emission of dispersive waves, as seen in Figure 7(bFigure 1. Figure 7(aFigure 2 and Figure 7(aFigure 3} present another repulsive regime, in which the collision triggers conspicuous deformation of the bouncing solitons, accompanied by the emission of weak dispersive-wave radiation. These phenomena reveal the inelastic character of

Figure 7. Collisions between stable MTSs, with parameters (a) and ; (a) and ; (a) and ; (a) and . Panels (b), (b), (b), and (b) display the initial MTS profiles and final ones, observed at . Other parameters are , , and .
the MTS collisions, as corroborated by the corresponding field profiles in Figure 7(bFigure 2 and Figure 7(bFigure 3. Figure 7(a4) depicts a different outcome of the collision, when the two MTSs undergo complete fusion, along with intense emission of dispersive waves, as seen in Figure 7(bFigure 4.
Conclusion
This work aims to produce dissipative dark-soliton families, sustained by the interplay of the PHEOD (pure-high-even-order dispersion) and parametric drive, extending the setting beyond the conventional second-order-dispersion regime. Two new families of stable topological solitons are found, namely, quiescent DTSs (dissipative topological solitons) and MTSs (moving topological solitons), for PHEOD orders , 6, 8, and 10. The topological solitons are combined with the zero-amplitude point, which connects two semi-infinite CW backgrounds with the phase shift between them. PHEOD gives rise to pronounced oscillatory tails, distinguishing these states from conventional dark solitons. The systematic linear-stability analysis and direct simulations corroborate the stability of both DTSs and MTSs. Pairwise collisions between the MTSs are inelastic, featuring two possibilities: the inter-soliton rebound or complete fusion, both accompanied by the emission of radiation waves.
These results demonstrate that PHEOD can do more than smoothly distort conventional dissipative soliton profiles: it provides the mechanism for generating topological solitons with specific internal structures and interaction dynamics. These findings establish PHEOD as a basis for engineering robust dissipative topological solitons, both quiescent and moving ones. As an extension of the analysis, it may be interesting to construct nonlinear states in systems exhibiting competition between dispersion terms of different orders and different signs (normal/anomalous).
Funding. National Natural Science Foundation of China (Grant No. 62675244); Fundamental Research Program of Shanxi Province (Grant No. 202303021211185); Israel Science Foundation (Grant No. 1695/22); ANID (Chile) through FONDECYT (Grant No. 1260401).
Disclosures. The authors declare no conflicts of interest.
Data availability. Data underlying the results presented in this paper are not publicly available at this time but may be obtained from the authors upon reasonable request.
References
- [1]N. Akhmediev and A. Ankiewicz, eds., Dissipative Solitons (Springer, 2005).
- [2]N. Akhmediev and A. Ankiewicz, eds., Dissipative Solitons: From Optics to Biology and Medicine (Springer, 2008).
- [3]M. F. S. Ferreira, ed., Dissipative Optical Solitons (Springer, 2022).
- [4]P. Grelu and N. Akhmediev, “Dissipative solitons for mode-locked lasers,” Nat. Photonics 6, 84–92 (2012).
- [5]A. Mecozzi, W. L. Kath, P. Kumar, and C. G. Goedde, “Long-term storage of a soliton bit stream by use of phase-sensitive amplification,” Opt. Lett. 19, 2050–2052 (1994).
- [6]S. Longhi, “Ultrashort-pulse generation in degenerate optical parametric oscillators,” Opt. Lett. 20, 695–697 (1995).pubmed.ncbi.nlm.nih.gov/19859300
- [7]S. Longhi, “Stable multipulse states in a nonlinear dispersive cavity with parametric gain,” Phys. Rev. E 53, 5520–5522 (1996).pubmed.ncbi.nlm.nih.gov/9964894
- [8]W. H. Renninger, A. Chong, and F. W. Wise, “Dissipative solitons in normal-dispersion fiber lasers,” Phys. Rev. A 77, 023814 (2008).DOI
- [9]J. Yelo-Sarrión, F. Leo, and S.-P. Gorza, “Dissipative solitons in mode-locked parity–time-symmetric lasers,” Nat. Photonics 20, 310–316 (2026).
- [10]L. A. Lugiato and R. Lefever, “Spatial dissipative structures in passive optical systems,” Phys. Rev. Lett. 58, 2209–2211 (1987).pubmed.ncbi.nlm.nih.gov/10034681
- [11]I. V. Barashenkov, M. M. Bogdan, and V. I. Korobov, “Stability diagram of the phase-locked solitons in the parametrically driven, damped nonlinear Schrödinger equation,” Europhys. Lett. 15, 113–118 (1991).DOI
- [12]N. V. Alexeeva, I. V. Barashenkov, and D. E. Pelinovsky, “Dynamics of the parametrically driven NLS solitons beyond the onset of the oscillatory instability,” Nonlinearity 12, 103–140 (1999).
- [13]I. V. Barashenkov and E. V. Zemlyanaya, “Stable complexes of parametrically driven, damped nonlinear Schrödinger solitons,” Phys. Rev. Lett. 83, 2568–2571 (1999).DOI
- [14]I. V. Barashenkov, S. R. Woodford, and E. V. Zemlyanaya, “Parametrically driven dark solitons,” Phys. Rev. Lett. 90, 054103 (2003).
- [15]N. Dror and B. A. Malomed, “Spontaneous symmetry breaking in coupled parametrically driven waveguides,” Phys. Rev. E 79, 016605 (2009).pubmed.ncbi.nlm.nih.gov/19257158
- [16]N. Engelbert, F. De Lucia, P. Parra-Rivas, C. Mas Arabí, P.-J. Sazio, S.-P. Gorza, and F. Leo, “Parametrically driven Kerr cavity solitons,” Nat. Photonics 15, 857–861 (2021).
- [17]G. Moille, M. Leonhardt, D. Paligora, N. Engelbert, F. Leo, J. Fatome, K. Srinivasan, and M. Erkin̈talo, “Parametrically driven pure-Kerr temporal solitons in a chip-integrated microcavity,” Nat. Photonics 18, 617–624 (2024).arxiv.org/abs/2306.04078
- [18]D. Wang, R. Li, D. Laroze, B. A. Malomed, and P. Li, “Quiescent and traveling solitons in the fractional parametrically driven damped nonlinear Schrödinger equation,” Phys. Rev. E 114, 014223 (2026).
- [19]A. Blanco-Redondo, C. M. de Sterke, J. E. Sipe, T. F. Krauss, B. J. Eggleton, and C. Husko, “Pure-quartic solitons,” Nat. Commun. 7, 10427 (2016).
- [20]A. F. J. Runge, D. D. Hudson, K. K. K. Tam, C. M. de Sterke, and A. Blanco-Redondo, “The pure-quartic soliton laser,” Nat. Photonics 14, 492–497 (2020).arxiv.org/abs/1910.10314
- [21]Z. Wang, Y. Lin, Y. Song, Z. Deng, J. Liu, and C. Zhang, “Revealing the dynamics of multiple solitons and soliton pulsations in a quartic-dispersion fiber laser,” Laser Photonics Rev. 20, e01851 (2026).DOI
- [22]A. F. J. Runge, Y. L. Qiang, T. J. Alexander, M. Z. Rafat, D. D. Hudson, A. Blanco-Redondo, and C. M. de Sterke, “Infinite hierarchy of solitons: Interaction of Kerr nonlinearity with even orders of dispersion,” Phys. Rev. Res. 3, 013166 (2021).DOI
- [23]Y. Han, B. Gao, H. Wen, C. Ma, J. Huo, Y. Li, L. Zhou, Q. Li, G. Wu, and L. Liu, “Pure-high-even-order dispersion bound solitons complexes in ultra-fast fiber lasers,” Light Sci. Appl. 13, 101 (2024).DOI
- [24]Q. Li, F. Qiao, H. Wen, Y. Li, L. Zhou, G. Wu, L. Liu, and B. Gao, “The bound states of pure-high-even-order dispersion solitons,” Chaos Solitons Fractals 204, 117742 (2026).DOI
- [25]Z. C. Qian, M. Liu, A. P. Luo, Z. C. Luo, and W. C. Xu, “Dissipative pure-quartic soliton fiber laser,” Opt. Express 30, 22066–22073 (2022).DOI
- [26]Z. L. Wu, M. Liu, Y. X. Gao, Z. X. Zhang, M. Luo, Y. Hu, T. J. Li, A. P. Luo, W. C. Xu, and Z. C. Luo, “Spectral sidebands of dissipative soliton in a positive fourth-order-dispersion fiber laser,” Opt. Express 32, 47882–47892 (2024).DOI
- [27]Z. L. Wu, Z. X. Zhang, T. J. Li, M. Luo, M. Liu, A. P. Luo, W. C. Xu, and Z. C. Luo, “Pulsating dynamics of dissipative pure-quartic soliton in a fiber laser,” Opt. Express 33, 10129–10139 (2025).DOI
- [28]H. Taheri and A. B. Matsko, “Quartic dissipative solitons in optical Kerr cavities,” Opt. Lett. 44, 3086–3089 (2019).DOI
- [29]P. Parra-Rivas, S. Hetzel, Y. V. Kartashov, P. Fernández de Córdoba, J. A. Cenejnero, A. Aceves, and C. Milián, “Quartic Kerr cavity combs: Bright and dark solitons,” Opt. Lett. 47, 2438–2441 (2022).
- [30]K. Liu, S. Yao, and C. Yang, “Raman pure quartic solitons in Kerr microresonators,” Opt. Lett. 46, 993–996 (2021).
- [31]S. Mei, M. Liu, H. Huang, T. He, Z. Lu, and W. Zhao, “Route to pure-quartic solitons in the mid-infrared,” Opt. Lett. 50, 2848–2851 (2025).
- [32]H. Zhu, M. Liu, H. Huang, J. Wang, S. Mei, and W. Zhao, “Raman-assisted pure quartic platicons in microresonators,” Opt. Lett. 50, 3357–3360 (2025).
- [33]C. Silvestri, Y. L. Qiang, K. Panda, J. Widjaja, S. Coen, C. M. de Sterke, and A. F. J. Runge, “Pure high-order dispersion dissipative Kerr solitons in optical cavities,” Opt. Lett. 50, 4262–4265 (2025).
- [34]P. Li, L. Xing, D. Wang, D. Mihalache, D. Laroze, and B. A. Malomed, “Parametrically driven pure-quartic solitons,” Opt. Lett. 51, 3217–3220 (2026).arxiv.org/abs/2605.15591
- [35]N. D. Mermin, “The topological theory of defects in ordered media,” Rev. Mod. Phys. 51, 591–648 (1979).DOI
- [36]N. Manton and P. Sutcliffe, Topological Solitons, Cambridge Monographs on Mathematical Physics (Cambridge University Press, Cambridge, 2004).DOI
- [37]S. Trillo, M. Haelterman, and A. Sheppard, “Stable topological spatial solitons in optical parametric oscillators,” Opt. Lett. 22, 970–972 (1997).pubmed.ncbi.nlm.nih.gov/18185722
- [38]G. L. Oppo, A. J. Scroggie, and W. J. Firth, “From domain walls to localized structures in degenerate optical parametric oscillators,” J. Opt. B: Quantum Semiclassical Opt. 1, 133–138 (1999).DOI
- [39]M. Gilles, P.-Y. Bonny, J. Garnier, A. Picozzi, M. Guasoni, and J. Fatome, “Polarization domain walls in optical fibres as topological bits for data transmission,” Nat. Photonics 11, 102–107 (2017).DOI
- [40]N. Engelbert, R. M. Gray, L. Ledezma, R. Sekine, T. Zacharias, R. Ramesh, B. K. Gutierrez, P. Parra-Rivas, and A. Marandi, “Topological soliton frequency comb in nanophotonic lithium niobate,” Nature 652, 76–81 (2026).
- [41]J. Yang, “Newton-conjugate-gradient methods for solitary wave computations,” J. Comput. Phys. 228, 7007–7024 (2009).DOI
- [42]J. Yang, Nonlinear Waves in Integrable and Nonintegrable Systems (SIAM, 2010).DOI
- [43]J. Widjaja, E. Kobakhidze, T. R. Cartwright, J. P. Lourdesamy, A. F. J. Runge, T. J. Alexander, and C. M. de Sterke, “Absence of Galilean invariance for pure-quartic solitons,” Phys. Rev. A 104, 043526 (2021).DOI