betaFeedback

WorksMathematics

Existence of Lagrangian Mean Curvature Flow Singularities with Bounded Mean Curvature

Abstract

In every dimension n≥3n \ge 3, we show there exist Lagrangian mean curvature flows that develop neck pinch singularities such that the mean curvature remains uniformly bounded. This follows from a related result that, under a structural assumption on the singularity formation, the mean curvature at small scales near the singularity can be bounded by the Lagrangian angle at outer scales with suitable weights. Applying this result to a subset of the finite-time Lagrangian mean curvature flow singularities constructed in the companion paper [arXiv:2607.03152] and the infinite-time Lagrangian mean curvature flow singularities constructed by Tsai, Wood, and the second-named author [arXiv:2401.02228] then gives examples of both finite-time and infinite-time singularity formation with uniformly bounded mean curvature.

Introduction

Mean curvature flow {Ft:L→L(t)}t∈I\{F_t : L \to L(t)\}_{t \in I} evolves a submanifold by its mean curvature vector HL(t)\mathbf{H}_{L(t)}. As the negative L2L^2-gradient flow of volume, it provides a natural framework for studying minimal submanifolds. However, the flow may develop singularities at which the second fundamental form AL(t)\mathbf{A}_{L(t)} becomes unbounded [4]:

lim sup⁡t→Tsup⁡L(t)∣AL(t)∣=∞\limsup_{t \to T}\sup_{L(t)} \lvert\mathbf{A}_{L(t)}\rvert= \infty

where the singular time TT may be finite or infinite. A finite-time singularity is called Type I if

sup⁡L(t)∣AL(t)∣≤CT−t\sup_{L(t)} \lvert\mathbf{A}_{L(t)}\rvert\le\frac{C}{\sqrt{T-t}}

for some constant C>0C > 0 and all t<Tt < T sufficiently close to TT; otherwise, it is called Type II.

Type I singularities are modeled on smooth, non-flat self-shrinkers under parabolic rescaling, and the mean curvature necessarily becomes unbounded as well [LŠ10]. By contrast, certain Type II singularities are modeled on non-flat minimal submanifolds at scales smaller than the parabolic scale T−t\sqrt{T-t}. This raises the possibility that the second fundamental form may blow up while the mean curvature remains uniformly bounded.

For mean curvature flow of closed embedded surfaces in R3\mathbb{R}^3, Li–Wang [11] proved the mean curvature must blow up at the first singular time, regardless of whether the singularity is Type I or Type II. Le-Šešum [LŠ10] have an alternative proof of this result assuming the multiplicity-one conjecture, which was recently proven by Bamler-Kleiner [1]. In higher dimensions, Velázquez [Vel94] constructed a family of complete, O(n)×O(n)O(n) \times O(n)-invariant hypersurfaces in R2n\mathbb{R}^{2n}, n≥4n \ge4, whose mean curvature flows develop finite-time Type II singularities with precisely quantified blow-up rates. At the curvature scale, these singularities are modeled on smooth minimal hypersurfaces asymptotic to the Simons cone. The blow-up rates are governed by eigenvalues of the linearized rescaled mean curvature flow operator at this cone. Guo–Šešum [2] showed that, for n≥5n \ge5, solutions corresponding to the lowest admissible mode exhibit mean curvature blow-up, albeit at a slower rate than the second fundamental form. In contrast, the first-named author proved solutions corresponding to higher even modes have uniformly bounded mean curvature, despite the faster blow-up of their second fundamental form [18].

Analogous questions apply to the Ricci flow. At finite-time Ricci flow singularities, the Riemann curvature RmRm and Ricci curvature RcRc always blow up [3 Šeš05]. The behavior of scalar curvature SS, however, is more subtle. The first-named author constructed Ricci flow solutions that form finite-time singularities modeled on Ricci-flat cones [19], and OpenAI very recently indicated these solutions have uniformly bounded scalar curvature SS in high dimensions [13]. In low dimensions n≤3n \le3, the Hamilton-Ivey pinching estimates [3, 5] imply SS always blows up at finite-time Ricci flow singularities. OpenAI have also claimed SS always blows up at finite-time Ricci flow singularities in dimension n=4n = 4 [Ope26b].

In this paper, we study singularities of Lagrangian mean curvature flow (LMCF), the mean curvature flow of Lagrangian submanifolds in Calabi–Yau manifolds. The conjectural programme initiated by Thomas–Yau [TY02] and refined by Joyce [6] proposes using LMCF, with surgeries when necessary, to construct special Lagrangian submanifolds, which minimize volume in their homology classes. Understanding singularity formation is therefore essential to this programme.

A fundamental example of finite-time singularity formation is the Lawlor neck pinch, whose tangent flow is the static special Lagrangian union of two transverse planes and whose curvature-scale blow-up model is a Lawlor neck, a special Lagrangian desingularization of this union. Neves [12] established finite-time singularity formation in an equivariant setting, while Wood [Woo24] identified the corresponding tangent flows and Lawlor neck blow-up models. A major advance beyond the equivariant setting was made by Lotay–Schulze–Székelyhidi [10]. For zero-Maslov, rational LMCF in compact Calabi–Yau surfaces, they proved uniqueness of the two-plane tangent flow and established a detailed geometric description of the collapsing Lawlor neck, without symmetry assumptions. Furthermore, when all singularities at the first singular time are of this form, they showed that the flow can be continued past the singular time as a smooth immersed LMCF. In arbitrary dimension, Li–Székelyhidi [9] subsequently proved, under suitable hypotheses, that a singularity admitting such a two-plane tangent flow has a Type II blow-up sequence converging to a Lawlor neck. Székelyhidi [Szé26] introduced a notion of nondegenerate neck pinch for LMCF of surfaces, proved that such singularities are stable under small perturbations, and constructed examples in compact Calabi–Yau surfaces. He also showed that neck pinches can be perturbed near the singular time to become nondegenerate. The authors constructed finite-time Type II singularities, including Lawlor neck pinches, with quantitatively precise curvature blow-up rates [16]. Infinite-time Lawlor neck pinches with precise polynomial curvature blow-up rates were constructed by the second-named author with Tsai and Wood [21].

Main Result

Our main result is a local estimate for the mean curvature near Lawlor neck pinches in complex dimensions n≥3n \ge3, under the following two-scale structural assumption.

Assumption 1.1. Let 0<T≤∞0 < T \le\infty, and let {Ft:L→L(t)}t∈[0,T)\{F_t : L \to L(t)\}_{t\in[0,T)} be a smooth, properly immersed, zero-Maslov LMCF in Cn\mathbb{C}^n, with n≥3n \ge3. Suppose that there exist an outer scale R:[0,T)→(0,r0]R : [0,T) \to(0,r_0] and an inner scale λ:[0,T)→(0,∞)\lambda: [0,T) \to(0,\infty) satisfying the following conditions.

(1) Both RR and λ\lambda are C1C^1, RR is non-increasing, and the following scale comparison estimates hold:

(a) the inner and outer scales are asymptotically separated

lim⁡t→Tλ(t)R(t)=0,(1)\lim_{t\to T}\frac{\lambda(t)}{R(t)}=0, \tag*{(1)}

and

(b) there exists D0>0D_0 > 0 such that

R(t)2∣λ′(t)∣λ(t)≤D0(2)R(t)^2\frac{|\lambda'(t)|}{\lambda(t)} \le D_0 \tag*{(2)}

for all t∈[0,T)t \in[0,T).

(2) For every sequence ti→Tt_i \to T, the parabolically rescaled flows

Li(τ):=λ(ti)−1L(ti+τλ(ti)2)L_i(\tau) := \lambda(t_i)^{-1}L\bigl(t_i+\tau\lambda(t_i)^2\bigr)

admit a subsequence converging in Cloc∞(Cn×(−∞,0])C^\infty_{\mathrm{loc}}(\mathbb{C}^n\times(-\infty,0]) to the static flow generated by a multiplicity one Lawlor neck LL.

(3) For every pair of sequences ti→Tt_i \to T and μi→0\mu_i \to0 satisfying

λ(ti)μi→0andμiR(ti)→0,\frac{\lambda(t_i)}{\mu_i}\to0 \qquad\text{and}\qquad \frac{\mu_i}{R(t_i)}\to0,

the parabolically rescaled flows

Li(τ):=μi−1L(ti+τμi2)L_i(\tau) := \mu_i^{-1}L\bigl(t_i+\tau\mu_i^2\bigr)

admit a subsequence converging in Cloc∞((Cn∖{0})×(−∞,0])C^\infty_{\mathrm{loc}}\bigl((\mathbb{C}^n\setminus\{0\})\times(-\infty,0]\bigr) to the static flow generated by a multiplicity one special Lagrangian cone C=P0∪P1C=P_0\cup P_1, where P0P_0 and P1P_1 are two transversely intersecting planes.

Bounding the mean curvature H\mathbf{H} under these assumptions relies on the evolution equation ∂tθL(t)=ΔL(t)θL(t)\partial_t\theta_{L(t)}=\Delta_{L(t)}\theta_{L(t)} for the Lagrangian angle under LMCF and the identity HL(t)=J∇θL(t)\mathbf{H}_{L(t)}=J\nabla\theta_{L(t)}. We first establish a weighted estimate for θL(t)\theta_{L(t)} in the inner region in terms of its values on the outer annulus C−1R(t)≤∣x∣≤R(t)C^{-1}R(t)\le|x|\le R(t) (Theorem 2.4). This estimate is obtained by a blow-up argument using Liouville-type theorems for ancient solutions of the heat equation on the limiting Lawlor neck and punctured two-plane cone appearing in items 2 and 3 of Assumption 1.1. Interior gradient estimates for θL(t)\theta_{L(t)} (Theorem 2.6), together with the identity HL(t)=J∇θL(t)\mathbf{H}_{L(t)}=J\nabla\theta_{L(t)}, then yield the following pointwise mean curvature bound.

Theorem 1.2. Let {Ft:L→L(t)}t∈[0,T)\{F_t : L \to L(t)\}_{t\in[0,T)} satisfy Assumption 1.1 with inner scale λ(t)\lambda(t) and outer scale R(t)R(t). Define a regularized distance function by ρ(x,t):=λ(t)2+∣Ft(x)∣2\rho(x,t):=\sqrt{\lambda(t)^2+|F_t(x)|^2} for

(x,t)∈L×[0,T)(x,t) \in L \times[0,T). Let θ(x,t)\theta(x,t) be a globally defined Lagrangian angle, and let H(x,t)\mathbf{H}(x,t) denote the mean curvature vector along FtF_t. Fix a constant θˉ∈R\bar{\theta} \in\mathbb{R}.

For every α∈(0,n−2)\alpha\in(0,n-2) and β∈R\beta\in\mathbb{R}, there exist C>1C>1 and t0∈[0,T)t_0 \in[0,T) such that

∣H(x,t)∣≤C(1+λ(t)βρ(x,t)1+αΘα,β,C)(3)\lvert\mathbf{H}(x,t)\rvert\leq C\left(1+\frac{\lambda(t)^\beta}{\rho(x,t)^{1+\alpha}}\Theta_{\alpha,\beta,C}\right) \tag*{(3)}

whenever t∈[t0,T)t \in[t_0,T) and ∣Ft(x)∣≤C−1R(t)\lvert F_t(x)\rvert\leq C^{-1}R(t), where

Θα,β,C:=sup⁡t′∈[0,T)sup⁡x′∈LC−1R(t′)≤∣Ft′(x′)∣≤R(t′)ρ(x′,t′)αλ(t′)β∣θ(x′,t′)−θˉ∣.\Theta_{\alpha,\beta,C}:=\sup_{t'\in[0,T)}\sup_{\substack{x'\in L\\ C^{-1}R(t')\leq\lvert F_{t'}(x')\rvert\leq R(t')}}\frac{\rho(x',t')^\alpha}{\lambda(t')^\beta}\lvert\theta(x',t')-\bar{\theta}\rvert.

References

  1. [1]R. H. Bamler and B. Kleiner, On the multiplicity one conjecture for mean curvature flows of surfaces, arXiv preprint arXiv:2312.02106 (2024).arxiv.org/abs/2312.02106
  2. [2]S.-H. Guo and N. Sesum, Analysis of Velázquez’s solution to the mean curvature flow with a type II singularity, Communications in Partial Differential Equations 43 (2018), no. 2, 185–285.
  3. [3]R. S. Hamilton, The formation of singularities in the Ricci flow, Surveys in Differential Geometry 2 (1995).
  4. [4]G. Huisken, Flow by mean curvature of convex surfaces into spheres, Journal of Differential Geometry 20 (1984), 237–266.DOI
  5. [5]T. Ivey, Ricci solitons on compact three-manifolds, Differential Geometry and Its Applications 3 (1993), no. 4, 301–307.DOI
  6. [6]D. Joyce, Conjectures on Bridgeland stability for Fukaya categories of Calabi-Yau manifolds, special Lagrangians, and Lagrangian mean curvature flow, EMS Surveys in Mathematical Sciences 2 (2015), no. 1, 1–62.DOI
  7. [8]J. Lotay and G. Oliveira, The mean curvature blows up at nondegenerate neck pinch singularities of Lagrangian mean curvature flow, arXiv preprints arXiv:2609.31343 (2026).arxiv.org/abs/2609.31343
  8. [9]Y. Li and G. Székelyhidi, Singularity formations in Lagrangian mean curvature flow, arXiv preprint arXiv:2410.22172 (2024).arxiv.org/abs/2410.22172
  9. [10]J. Lotay, F. Schulze, and G. Székelyhidi, Neck pinches along the Lagrangian mean curvature flow of surfaces, arXiv preprints arXiv:2208.11054 (2022).arxiv.org/abs/2208.11054
  10. [11]H. Li and B. Wang, The extension problem of the mean curvature flow (I), Inventiones Mathematicae 218 (2019), 721–777.arxiv.org/abs/1608.02832
  11. [12]A. Neves, Singularities of Lagrangian mean curvature flow: zero-Maslov class case, Inventiones Mathematicae 168 (2007), no. 3, 449–484.
  12. [13]OpenAI, A closed Ricci flow with bounded scalar curvature and finite-time curvature blowup, 2026. OpenAI Math Release preprint OAI:A-closed-Ricci-flow-with-bounded-scalar-curvature-and-finite-time-curvature-blowup-September-24-2026.
  13. [16]M. Stolarski and W.-B. Su, Finite-time singularities of Lagrangian mean curvature flow with quantitatively precise dynamics, arXiv preprints arXiv:2607.03152 (2026).arxiv.org/abs/2607.03152
  14. [17]———, Spectral analysis for finite-time singularities of Lagrangian mean curvature flow, arXiv preprints arXiv:2606.21541 (2026).arxiv.org/abs/2606.21541
  15. [18]M. Stolarski, Existence of mean curvature flow singularities with bounded mean curvature, Duke Mathematical Journal 172 (2023), no. 7, 1235–1292.arxiv.org/abs/2003.06383
  16. [19]———, Curvature blow-up in doubly-warped product metrics evolving by Ricci flow, Memoirs of the American Mathematical Society 295 (2024), no. 1470.
  17. [20]———, On the structure of singularities of weak mean curvature flows with mean curvature bounds, Journal für die reine und angewandte Mathematik (Crelles Journal) 830 (2026), 141–177.arxiv.org/abs/2311.16262
  18. [21]W.-B. Su, C.-J. Tsai, and A. Wood, Infinite-time singularities of the Lagrangian mean curvature flow, arXiv preprints arXiv:2401.02228 (2024).arxiv.org/abs/2401.02228

Paper details

vlnc:W_agt4bq3b
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 11

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Mathematics

Not recorded for this paper

View statement
Looking for related papers…
Contents