betaFeedback

WorksMathematics

A free boundary problem for an immersed filament in 3D Stokes flow

Abstract

We consider a simplified extensible version of a dynamic free boundary problem for a thin filament with radius ε>0ε>0 immersed in 3D Stokes flow. The 3D fluid is coupled to the quasi-1D filament dynamics via a novel type of angle-averaged Neumann-to-Dirichlet operator for the Stokes equations, and much of the difficulty in the analysis lies in understanding this operator. Here we show that the main part of this angle-averaged NtD map about a closed, curved filament is the corresponding operator about a straight filament, for which we can derive an explicit symbol. Remainder terms due to curvature are lower order with respect to regularity or size in εε. Using this operator decomposition, it is then possible to show that the simplified free boundary evolution is a third-order parabolic equation and is locally well posed. This establishes a more complete mathematical foundation for the myriad computational results based on slender body approximations for thin immersed elastic structures.

Introduction

Thin elastic filaments immersed in very viscous fluids play a central role in many biological processes, including mitotic spindle positioning during cell division [55], cytoskeletal mechanics [44], sperm motility [32, 11], and ciliary transport [13]. To capture the effective interaction between a thin semiflexible filament and the surrounding viscous fluid, it is natural to seek a lower dimensional representation of immersed filament dynamics. This is the basic tenet of slender body theories, which play an important role in many computational models.

Given an immersed filament with finite radius ϵ>0\epsilon> 0 and centerline position X(s,t):R/Z×[0,T]→R3\mathbf{X}(s,t):\mathbb{R}/\mathbb{Z}\times[0,T]\to\mathbb{R}^{3}, the fundamental aim is to capture the filament evolution using an equation of the form

∂X∂t=−Lϵ(X)[∂s4X−∂s(τ∂sX)],∣∂sX∣=1.(1)\frac{\partial\mathbf{X}}{\partial t}=-\mathcal{L}_{\epsilon}(\mathbf{X})\left[\partial_s^4\mathbf{X}-\partial_s(\tau\partial_s\mathbf{X})\right],\qquad|\partial_s\mathbf{X}|=1. \tag*{(1)}

Here Lϵ(X)\mathcal{L}_{\epsilon}(\mathbf{X}) is an operator mapping force data defined along a 1D curve to a 3D velocity field governing the position of the filament centerline. This operator must also incorporate the effects of the surrounding 3D fluid on the filament evolution. The forcing terms −∂s4X+∂s(τ∂sX)-\partial_s^4\mathbf{X}+\partial_s(\tau\partial_s\mathbf{X}) come from Euler-Bernoulli beam theory and model a simple elastic response along the filament, with τ(s,t)\tau(s,t), the filament tension, serving as a Lagrange multiplier to enforce the inextensibility constraint ∣∂sX∣=1|\partial_s\mathbf{X}|=1. The key feature of this type of formulation (1) is that the filament dynamics are 1D. A major difficulty is coupling these 1D dynamics and the surrounding 3D fluid via the operator Lϵ\mathcal{L}_{\epsilon} in both a physically and a mathematically reasonable way.

A simple and mathematically reasonable choice for this coupling operator is local slender body theory, Lϵ,locSB(X)=c∣log⁡ϵ∣(I+∂sX⊗∂sX)\mathcal{L}_{\epsilon,\mathrm{loc}}^{\mathrm{SB}}(\mathbf{X})=c|\log\epsilon|(\mathbf{I}+\partial_s\mathbf{X}\otimes\partial_s\mathbf{X}) [31, 18, 6, 32, 70, 10, 11]. For this very simple choice of coupling, the analogue of (1) is a fourth order parabolic equation for the filament position coupled with a 1D elliptic equation for the filament tension τ\tau. In addition to establishing well-posedness in this setting, the author and Mori [51, 58] prove that the filament can generate net forward motion (i.e. swim) with a suitable choice of time-periodic forcing. However, Lϵ,locSB\mathcal{L}_{\epsilon,\mathrm{loc}}^{\mathrm{SB}} incorporates only a very simplified description of the surrounding fluid physics on the filament evolution.

To better capture the physics of the fluid-structure interaction, a natural attempt would be to use nonlocal slender body theory Lϵ,nlocSB(X)\mathcal{L}_{\epsilon,\mathrm{nloc}}^{\mathrm{SB}}(\mathbf{X}) [36, 34, 69], which, in addition to the terms from Lϵ,locSB\mathcal{L}_{\epsilon,\mathrm{loc}}^{\mathrm{SB}}, includes a 1D integral operator incorporating nonlocal interactions along the filament. This is a popular choice for computational models [41, 64, 68, 40, 17, 4, 60, 43, 45] because it is more physically realistic than Lϵ,locSB\mathcal{L}_{\epsilon,\mathrm{loc}}^{\mathrm{SB}} and the evolution (1) is still relatively straightforward to compute numerically. However, the classical Lϵ,nlocSB\mathcal{L}_{\epsilon,\mathrm{nloc}}^{\mathrm{SB}} operator is known to have issues at high wavenumbers ∼1/ϵ\sim1/\epsilon leading to nonsensical mapping properties [30, 50, 69, 63], even in analytic regularity. This issue does not typically affect numerics, as these high frequencies are truncated by discretization. Even so, from a PDE perspective, Lϵ,nlocSB\mathcal{L}_{\epsilon,\mathrm{nloc}}^{\mathrm{SB}} cannot give rise to a well-posed evolution equation (1).

Thus, a central question is how to incorporate more of the fluid physics into the operator Lϵ\mathcal{L}_{\epsilon} while still yielding a well-posed PDE evolution (1). In [52, 53], the author along with Mori and Spirn propose a novel candidate for the coupling operator Lϵ\mathcal{L}_{\epsilon} in the form of an angle-averaged Neumann-to-Dirichlet operator for the 3D Stokes equations. This notion of slender body Neumann-to-Dirichlet (NtD) map is defined as the solution to a natural type of boundary value problem for the Stokes equations in the exterior of the thin filament (see equation (11)). It therefore incorporates much more of the fluid physics than local slender body theory but also has more reasonable mapping properties than nonlocal slender body theory. In [52, 53], we establish well-posedness for the static slender body boundary value problem in a natural energy space and moreover show that the solution is close in a suitable sense to nonlocal slender body theory. We have since extended this notion of slender body NtD map in various directions [49, 57, 50, 46, 59], but all analysis has thus far been in the static setting.

Here we give a more complete answer to the central question above by establishing local-in-time well-posedness for a simplified version of (1) (see equation (20)) using the slender body NtD map Lϵ\mathcal{L}_{\epsilon}. In our simplified dynamics, the filament is allowed to change length over time, although not necessarily in a physically realistic way. This allows us to develop the theory for the main part of the evolution (1) without also needing to solve for the filament tension τ\tau. Developing this well-posedness theory requires a detailed understanding of the mapping properties of the map Lϵ\mathcal{L}_{\epsilon}. The bulk of this paper is therefore devoted to proving Theorem 1.5, a technically demanding decomposition of Lϵ\mathcal{L}_{\epsilon} into a main part plus lower order remainders which are smoother or small with respect to ϵ\epsilon.

Using a layer potential argument, we show that the principal behavior of Lϵ\mathcal{L}_{\epsilon} is that of the corresponding operator about a straight cylinder with periodic boundary conditions, for which we can derive an explicit symbol. Using this explicit symbol, we show that the toy extensible version of (1) is third-order parabolic and locally well-posed. This provides a proof-of-concept for using Lϵ\mathcal{L}_{\epsilon} to solve a dynamic free boundary problem, and represents an important step toward establishing well-posedness for the full evolution (1) and a more complete mathematical justification of slender body theories of filament dynamics in Stokes flow.

Our extraction of the straight operator as the leading order behavior of Lϵ\mathcal{L}_{\epsilon} is a type of small-scale decomposition analogous to similar Dirichlet-to-Neumann operator decompositions used in other interfacial fluids problems. These include Hele-Shaw and water waves problems [1, 3, 7, 33, 39], the Muskat problem [2, 22, 56], and the Peskin problem for the evolution of a 1D filament in 2D Stokes flow [12, 14, 25, 27, 42, 38, 54, 66, 67, 26]. In many of these other interfacial fluids problems, however, the principal part of the operator is simpler to state and analyze. In contrast, the slender body NtD operator Lϵ\mathcal{L}_{\epsilon} requires a cylindrical geometry to be well-defined, and even for the straight cylinder, the symbol, while explicit, is not a simple expression. Considering a curved, closed filament as a perturbation of the straight filament and showing that the local effects due to curvature are lower order has also been used as a strategy to study vortex filament solutions of the Ginzburg-Landau, Navier-Stokes, and Euler equations [8, 19, 20]. We will also frequently refer to the author’s earlier work [59] deriving an analogous operator decomposition in the much simpler setting of the Laplace equation.

Geometry

We begin by defining the filament geometry at a fixed instant in time (for example, the initial configuration of the fiber). The geometric quantities described here will play a major role in the eventual extraction of the principal behavior for the slender body NtD map (Theorem 1.5). At this fixed time, we let X:T:=R/Z→R3X:\mathbb{T}:=\mathbb{R}/\mathbb{Z}\to\mathbb{R}^{3} denote the arclength parametrization of a closed, unit-length curve Γ0\Gamma_{0} in R3\mathbb{R}^{3} (see Figure 1). We require that the curve belongs to C2,β(T)C^{2,\beta}(\mathbb{T}), 0<β<10<\beta<1, and satisfies a non-self-intersection condition

A typical curved filament and a straight filament

Figure 1. A typical curved filament Σϵ\Sigma_\epsilon as in (7) in comparison with the straight filament CϵC_\epsilon given by (21).

inf⁡s≠s′∣X(s)−X(s′)∣∣s−s′∣≥cΓ(2)\inf_{s\ne s'}\frac{\lvert X(s)-X(s')\rvert}{\lvert s-s'\rvert}\ge c_{\Gamma} \tag*{(2)}

for some constant cΓ>0c_{\Gamma}>0. Taking et(s)=dXds(s)e_t(s)=\frac{dX}{ds}(s) to be the unit tangent vector to the curve at ss, points sufficiently close to Γ0\Gamma_{0} may be described by a C1,βC^{1,\beta} orthonormal frame (et(s),en1(s),en2(s))(e_t(s),e_{n_1}(s),e_{n_2}(s)) satisfying the ODEs

dds(et(s)en1(s)en2(s))=(0κ1(s)κ2(s)−κ1(s)0κ3−κ2(s)−κ30)(et(s)en1(s)en2(s)).(3)\frac{d}{ds} \begin{pmatrix} e_t(s)\\ e_{n_1}(s)\\ e_{n_2}(s) \end{pmatrix} = \begin{pmatrix} 0 & \kappa_1(s) & \kappa_2(s)\\ -\kappa_1(s) & 0 & \kappa_3\\ -\kappa_2(s) & -\kappa_3 & 0 \end{pmatrix} \begin{pmatrix} e_t(s)\\ e_{n_1}(s)\\ e_{n_2}(s) \end{pmatrix}. \tag*{(3)}

The coefficients κ1\kappa_1 and κ2\kappa_2 are related to the shape of the curve via

κ12(s)+κ22(s)=κ2(s),\kappa_1^2(s) + \kappa_2^2(s) = \kappa^2(s),

where κ2(s)=∣Xss∣2\kappa^2(s) = \lvert\mathbf{X}_{ss}\rvert^2 is the squared curvature of X(s)X(s). The coefficient κ3\kappa_3 may be taken to be a constant satisfying ∣κ3∣≤π\lvert\kappa_3\rvert\le\pi (see [52 Lemma 1.1]). Throughout, we will use the notation

κ∗:=sup⁡s∈T∣κ(s)∣,κ∗,β:=sup⁡s≠s′s,s′∈T∣Xss(s)−Xss(s′)∣∣s−s′∣β+κ∗.(4)\kappa_* := \sup_{s\in\mathbb{T}} \lvert\kappa(s)\rvert,\qquad\kappa_{*,\beta} := \sup_{\substack{s\ne s'\\s,s'\in\mathbb{T}}} \frac{\lvert\mathbf{X}_{ss}(s)-\mathbf{X}_{ss}(s')\rvert}{\lvert s-s'\rvert^\beta}+\kappa_* . \tag*{(4)}

Note that, using (3), the coefficients κℓ\kappa_\ell, ℓ=1,2\ell=1,2, satisfy

∥κℓ∥C0,β(T)=∥Xss⋅enℓ∥C0,β≤κ∗,β.\lVert\kappa_\ell\rVert_{C^{0,\beta}(\mathbb{T})}=\lVert\mathbf{X}_{ss}\cdot\mathbf{e}_{n_\ell}\rVert_{C^{0,\beta}}\le\kappa_{*,\beta}.

Given (3), it will also be convenient to define the following cylindrical basis vectors:

er(s,θ)=cos⁡θen1(s)+sin⁡θen2(s),eθ(s,θ)=−sin⁡θen1(s)+cos⁡θen2(s).(5)\mathbf{e}_r(s,\theta)=\cos\theta\mathbf{e}_{n_1}(s)+\sin\theta\mathbf{e}_{n_2}(s),\qquad\mathbf{e}_\theta(s,\theta)=-\sin\theta\mathbf{e}_{n_1}(s)+\cos\theta\mathbf{e}_{n_2}(s). \tag*{(5)}

Now, for Γ0\Gamma_0 as above, there exists a maximal radius

0<r∗=r∗(cΓ,κ∗)≤min⁡{12κ∗,cΓ2}.(6)0<r_*=r_*(c_{\Gamma},\kappa_*)\le\min\left\{\frac{1}{2\kappa_*},\frac{c_{\Gamma}}{2}\right\}. \tag*{(6)}

such that we may uniquely parameterize points xx satisfying dist⁡(x,Γ0)<r∗\operatorname{dist}(x,\Gamma_0)<r_* as

x=X(s)+rer(s,θ),0≤r<r∗.x=\mathbf{X}(s)+r\mathbf{e}_r(s,\theta),\qquad0\le r<r_*.

For any 0<ϵ<r∗40<\epsilon<\frac{r_*}{4}, we may define a slender filament with uniform radius ϵ\epsilon as

References

  1. [1]T. Alazard, N. Burq, and C. Zuily. On the cauchy problem for gravity water waves. Inventiones mathematicae, 198(1):71–163, 2014.
  2. [2]T. Alazard and O. Lazar. Paralinearization of the muskat equation and application to the cauchy problem. Archive for Rational Mechanics and Analysis, 237(2):545–583, 2020.DOI
  3. [3]T. Alazard and G. Métivier. Paralinearization of the dirichlet to neumann operator, and regularity of three-dimensional water waves. Communications in Partial Differential Equations, 34(12):1632–1704, 2009.arxiv.org/abs/0901.2888
  4. [4]H. I. Andersson, E. Celledoni, L. Ohm, B. Owren, and B. K. Tapley. An integral model based on slender body theory, with applications to curved rigid fibers. Physics of Fluids, 33(4):041904, 2021.DOI
  5. [5]H. Bahouri, J.-Y. Chemin, and R. Danchin. Fourier Analysis and Nonlinear Partial Differential Equations. Springer, 2011.
  6. [6]G. Batchelor. Slender-body theory for particles of arbitrary cross-section in Stokes flow. J. Fluid Mech., 44(3):419–440, 1970.DOI
  7. [7]J. T. Beale, T. Y. Hou, and J. S. Lowengrub. Growth rates for the linearized motion of fluid interfaces away from equilibrium. Communications on Pure and Applied Mathematics, 46(9):1269–1301, 1993.DOI
  8. [8]J. Bedrossian, P. Germain, and B. Harrop-Griffiths. Vortex filament solutions of the navier-stokes equations. arXiv e-prints, pages arXiv–1809, 2018.arxiv.org/abs/1809.04109
  9. [9]R. L. Bishop. There is more than one way to frame a curve. The American Mathematical Monthly, 82(3):246–251, 1975.
  10. [10]S. Camalet and F. Jülicher. Generic aspects of axonemal beating. New Journal of Physics, 2(1):24, 2000.DOI
  11. [11]S. Camalet, F. Jülicher, and J. Prost. Self-organized beating and swimming of internally driven filaments. Physical review letters, 82(7):1590, 1999.DOI
  12. [12]R. Cortez and R. M. Strain. Critical local well-posedness for the fully nonlinear peskin problem. arXiv preprint arXiv:2112.00692, 2021.
  13. [13]B. Chakrabarti, S. Fürthauer, and M. J. Shelley. A multiscale biophysical model gives quantized metachronal waves in a lattice of beating cilia. Proceedings of the National Academy of Sciences, 119(4):e2113539119, 2022.DOI
  14. [14]K. Chen and Q.-H. Nguyen. The peskin problem with b^1_{∞,∞} initial data. arXiv preprint arXiv:2107.13854, 2021.arxiv.org/abs/2107.13854
  15. [15]A. T. Chwang and T. Y.-T. Wu. Hydromechanics of low-reynolds-number flow. part 2. singularity method for stokes flows. Journal of Fluid mechanics, 67(4):787–815, 1975.DOI
  16. [16]E. Corona, L. Greengard, M. Rachh, and S. Veerapaneni. An integral equation formulation for rigid bodies in stokes flow in three dimensions. Journal of Computational Physics, 332:504–519, 2017.DOI
  17. [17]R. Cortez and M. Nicholas. Slender body theory for Stokes flows with regularized forces. Commun. Appl. Math. Comput. Sci., 7(1):33–62, 2012.DOI
  18. [18]R. Cox. The motion of long slender bodies in a viscous fluid part 1. general theory. J. Fluid Mech., 44(4):791–810, 1970.DOI
  19. [19]J. Dávila, M. Del Pino, M. Medina, and R. Rodiac. Interacting helical vortex filaments in the three-dimensional ginsburg-landau equation. Journal of the European Mathematical Society (EMS Publishing), 24(12), 2022.DOI
  20. [20]J. Dávila, M. d. Pino, M. Musso, and J. Wei. Travelling helices and the vortex filament conjecture in the incompressible euler equations. Calculus of Variations and Partial Differential Equations, 61(4):119, 2022.
  21. [21]NIST Digital Library of Mathematical Functions. https://dlmf.nist.gov/, Release 1.1.11 of 2023-09-15. F. W. J. Olver, A. B. Olde Daalhuis, D. W. Lozier, B. I. Schneider, R. F. Boisvert, C. W. Clark, B. R. Miller, B. W. Saunders, H. S. Cohl, and M. A. McClain, eds.
  22. [22]P. T. Flynn and H. Q. Nguyen. The vanishing surface tension limit of the muskat problem. Communications in Mathematical Physics, 382:1205–1241, 2021.DOI
  23. [23]G. B. Folland. Introduction to partial differential equations, volume 102. Princeton university press, 1995.
  24. [24]G. P. Galdi. An introduction to the mathematical theory of the Navier-Stokes equations: Steady-state problems. Springer Science & Business Media, 2011.DOI
  25. [25]F. Gancedo, R. Granero-Belinchón, and S. Scrobogna. Global existence in the lipschitz class for the n-peskin problem. arXiv preprint arXiv:2011.02294, 2020.arxiv.org/abs/2011.02294
  26. [26]E. García-Juárez and S. V. Haziot. Critical well-posedness for the 2d peskin problem with general tension. arXiv preprint arXiv:2311.10157, 2023.
  27. [27]E. Garcia-Juarez, Y. Mori, and R. M. Strain. The peskin problem with viscosity contrast. arXiv preprint arXiv:2009.03360, 2020.
  28. [28]M. Giaquinta and L. Martinazzi. An introduction to the regularity theory for elliptic systems, harmonic maps and minimal graphs. Springer Science & Business Media, 2013.
  29. [29]E. Giusti. Direct methods in the calculus of variations. World Scientific, 2003.
  30. [30]T. Götz. Interactions of fibers and flow: asymptotics, theory and numerics. Doctoral dissertation, University of Kaiserslautern, 2000.
  31. [31]J. Gray and G. Hancock. The propulsion of sea-urchin spermatozoa. Journal of Experimental Biology, 32(4):802–814, 1955.
  32. [32]M. Hines and J. Blum. Bend propagation in flagella. i. derivation of equations of motion and their simulation. Biophysical Journal, 23(1):41–57, 1978.
  33. [33]T. Y. Hou, J. S. Lowengrub, and M. J. Shelley. Removing the stiffness from interfacial flows with surface tension. Journal of Computational Physics, 114(2):312–338, 1994.DOI
  34. [34]R. E. Johnson. An improved slender-body theory for Stokes flow. Journal of Fluid Mechanics, 99(02):411–431, 1980.
  35. [35]E. E. Keaveny and M. J. Shelley. Applying a second-kind boundary integral equation for surface tractions in stokes flow. Journal of Computational Physics, 230(5):2141–2159, 2011.DOI
  36. [36]J. B. Keller and S. I. Rubinow. Slender-body theory for slow viscous flow. Journal of Fluid Mechanics, 75(4):705–714, 1976.
  37. [37]R. Kress, V. Maz’ya, and V. Kozlov. Linear integral equations, volume 82. Springer, 1989.
  38. [38]P.-C. Kuo, M.-C. Lai, Y. Mori, and A. Rodenberg. The tension determination problem for an inextensible interface in 2d stokes flow. Research in the Mathematical Sciences, 10(4):46, 2023.arxiv.org/abs/2302.05062
  39. [39]D. Lannes. Well-posedness of the water-waves equations. Journal of the American Mathematical Society, 18(3):605–654, 2005.
  40. [40]E. Lauga and T. R. Powers. The hydrodynamics of swimming microorganisms. Reports on Progress in Physics, 72(9):096601, 2009.
  41. [41]L. Li, H. Manikantan, D. Saintillan, and S. E. Spagnolie. The sedimentation of flexible filaments. J. Fluid Mech., 735:705–736, 2013.
  42. [42]F.-H. Lin and J. Tong. Solvability of the stokes immersed boundary problem in two dimensions. Communications on Pure and Applied Mathematics, 72(1):159–226, 2019.
  43. [43]O. Maxian, A. Mogilner, and A. Donev. Integral-based spectral method for inextensible slender fibers in stokes flow. Physical Review Fluids, 6(1):014102, 2021.DOI
  44. [44]O. Maxian, R. P. Peláez, A. Mogilner, and A. Donev. Simulations of dynamically cross-linked actin networks: morphology, rheology, and hydrodynamic interactions. PLoS computational biology, 17(12):e1009240, 2021.
  45. [45]O. Maxian, B. Sprinkle, C. S. Peskin, and A. Donev. Hydrodynamics of a twisting, bending, inextensible fiber in stokes flow. Physical Review Fluids, 7(7):074101, 2022.arxiv.org/abs/2201.04187
  46. [46]W. H. Mitchell, H. G. Bell, Y. Mori, L. Ohm, and D. Spirn. A single-layer based numerical method for the slender body boundary value problem. Journal of Computational Physics, 450:110865, 2022.
  47. [47]W. H. Mitchell and S. E. Spagnolie. A generalized traction integral equation for stokes flow, with applications to near-wall particle mobility and viscous erosion. Journal of Computational Physics, 333:462–482, 2017.DOI
  48. [48]G. Modica and M. Giaquinta. Non linear systems of the type of the stationary navier-stokes system. 1982.
  49. [49]Y. Mori and L. Ohm. An error bound for the slender body approximation of a thin, rigid fiber sedimenting in stokes flow. Research in the Mathematical Sciences, 7(2):1–27, 2020.DOI
  50. [50]Y. Mori and L. Ohm. Accuracy of slender body theory in approximating force exerted by thin fiber on viscous fluid. Studies in Applied Mathematics, 2021.
  51. [51]Y. Mori and L. Ohm. Well-posedness and applications of classical elastohydrodynamics for a swimming filament. Nonlinearity, 36(3):1799, 2023.DOI
  52. [52]Y. Mori, L. Ohm, and D. Spirn. Theoretical justification and error analysis for slender body theory. Communications on Pure and Applied Mathematics, 73(6):1245–1314, 2020.arxiv.org/abs/1807.00178
  53. [53]Y. Mori, L. Ohm, and D. Spirn. Theoretical justification and error analysis for slender body theory with free ends. Archive for Rational Mechanics and Analysis, 235(3):1905–1978, 2020.
  54. [54]Y. Mori, A. Rodenberg, and D. Spirn. Well-posedness and global behavior of the peskin problem of an immersed elastic filament in stokes flow. Communications on Pure and Applied Mathematics, 72(5):887–980, 2019.
  55. [55]E. Nazockdast, A. Rahimian, D. Needleman, and M. Shelley. Cytoplasmic flows as signatures for the mechanics of mitotic positioning. Molecular biology of the cell, 28(23):3261–3270, 2017.
  56. [56]H. Q. Nguyen and B. Pausader. A paradifferential approach for well-posedness of the muskat problem. Archive for Rational Mechanics and Analysis, 237(1):35–100, 2020.DOI
  57. [57]L. Ohm. Remarks on regularized stokeslets in slender body theory. Fluids, 6(8):283, 2021.arxiv.org/abs/2106.07842
  58. [58]L. Ohm. Well-posedness of a viscoelastic resistive force theory and applications to swimming. Journal of Nonlinear Science, 34(5):82, 2024.
  59. [59]L. Ohm. On an angle-averaged Neumann-to-Dirichlet map for thin filaments. Archive for Rational Mechanics and Analysis, 249(1):8, 2025.arxiv.org/abs/2308.06592
  60. [60]L. Ohm, B. K. Tapley, H. I. Andersson, E. Celledoni, and B. Owren. A slender body model for thin rigid fibers: validation and comparisons. Proceedings of MekIT’19, 2019.
  61. [61]H. Power and G. Miranda. Second kind integral equation formulation of stokes’ flows past a particle of arbitrary shape. SIAM Journal on Applied Mathematics, 47(4):689–698, 1987.
  62. [62]C. Pozrikidis. Boundary integral and singularity methods for linearized viscous flow. Cambridge University Press, 1992.DOI
  63. [63]M. J. Shelley and T. Ueda. The stokesian hydrodynamics of flexing, stretching filaments. Physica D: Nonlinear Phenomena, 146(1-4):221–245, 2000.DOI
  64. [64]S. E. Spagnolie and E. Lauga. Comparative hydrodynamics of bacterial polymorphism. Phys. Rev. Lett., 106(5):058103, 2011.
  65. [65]O. Steinbach. Numerical approximation methods for elliptic boundary value problems: finite and boundary elements. Springer Science & Business Media, 2007.
  66. [66]J. Tong. Regularized stokes immersed boundary problems in two dimensions: Well-posedness, singular limit, and error estimates. Communications on Pure and Applied Mathematics, 74(2):366–449, 2021.
  67. [67]J. Tong and D. Wei. Geometric properties of the 2-d peskin problem. arXiv preprint arXiv:2304.09556, 2023.arxiv.org/abs/2304.09556
  68. [68]A.-K. Tornberg and K. Gustavsson. A numerical method for simulations of rigid fiber suspensions. J. Comput. Phys., 215(1):172–196, 2006.
  69. [69]A.-K. Tornberg and M. J. Shelley. Simulating the dynamics and interactions of flexible fibers in stokes flows. Journal of Computational Physics, 196(1):8–40, 2004.
  70. [70]C. H. Wiggins and R. E. Goldstein. Flexive and propulsive dynamics of elastica at low reynolds number. Physical Review Letters, 80(17):3879, 1998.

Paper details

vlnc:W_arvdkd2n
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Mathematics

Not recorded for this paper

View statement
Looking for related papers…
Contents