WorksPhysics and Astronomy
Higher-order topological quantum battery
Abstract
A quantum battery is a next-generation energy-storage device that exploits genuinely quantum properties such as superposition and coherence. We propose a second-order topological quantum battery coupled to a photonic crystal described by the breathing-Kagome model, where optical loss is present on all lattice sites while nonlinear gains are introduced selectively at the output sites. Under these realistic non-Hermitian conditions, the system exhibits a clear topological phase transition manifested in both the ergotropy and the charging power. Remarkably, perfect work extraction is realized in the topological phase, where the maximum value of the ergotropy is quantized and acts as a good topological-phase indicator. The triangular geometry coherently distributes energy into two quantum batteries, where mirror-symmetry-protected phase synchronization gives rise to collective energy storage.
Introduction
Quantum batteries[1, 2, 3] constitute a promising paradigm within quantum technologies, where energy is stored and manipulated by exploiting genuinely quantum mechanical resources such as superposition and coherence. These quantum features enable charging processes that surpass their classical counterparts in terms of achievable charging power[4, 5, 6, 7], capacity[8], and extractable work[9, 10, 11, 12]. A central figure of merit is the ergotropy[13, 14] , which quantifies the maximum amount of useful work that can be extracted from the quantum battery via unitary operations. The charging power[4, 15, 16] defined as provides a complementary measure, characterizing the rate at which extractable energy is accumulated or released. Quantum batteries have a broad range of potential applications, including quantum sensing, quantum computing, and quantum communication networks, where rapid and on-demand energy delivery is essential. Moreover, they provide a fertile platform for exploring fundamental aspects of quantum thermodynamics[3, 17], such as work extraction, nonequilibrium dynamics, and the role of coherence as a thermodynamic resource.
Recently, a topological quantum battery[18] has been proposed based on the Su-Schrieffer-Heeger (SSH) chain, as illustrated in Figure 1(aFigure 1. In the original scheme, the SSH lattice is implemented in a photonic platform where selective loss is introduced only on one sublattice. This concept was later generalized to a parity-time (PT) symmetric topological quantum battery[19, 20] by incorporating balanced linear gain on the opposite sublattice, thereby exploiting non-Hermitian dynamics to enhance charging performance. In realistic photonic lattices, however, loss is present on all sites uniformly and optical gain is inherently nonlinear due to saturation effects. Indeed, topological lasers[21, 22] are realized under these realistic conditions, where non-Hermitian topology, gain saturation, and distributed loss collectively determine the emergence and stability of lasing edge modes. These same mechanisms may play a crucial role in shaping the behavior of practical topological quantum batteries realized in photonic platforms.

Figure 1. (a1) Illustration of a topological quantum battery based on the SSH model. (b1) Illustration of a second-order topological quantum battery based on the breathing-Kagome model. Red bars represent hopping and the blue bars represent hopping . (a2) Edge state of the topological quantum battery after relaxation. (b2) Corner states of the second-order topological quantum battery after relaxation. We have set for the SSH model and for the breathing-Kagome model in numerical calculations.
In this paper, we propose a second-order topological quantum battery coupled to a photonic crystal based on the breathing-Kagome model[23] with the loss introduced for all sites and the nonlinear gain introduced selectively at the output sites. Two quantum batteries are connected in a triangle of the breathing-Kagome lattice, as illustrated in Figure 1(bFigure 1. A clear topological phase transition is realized in the ergotropy and the charging power. Especially, the perfect work extraction is possible in the topological phase, where the maximum value of the ergotropy is quantized and acts as a good topological-phase indicator. Due to the mirror symmetric configuration, two quantum batteries are charged simultaneously and coherently.
Model
We consider a system made of a charger and quantum batteries connected by a photonic crystal. The minimal and most widely studied model[15, 24] of a quantum battery is a two-level system. The Hamiltonian of the -th quantum battery is given by[15, 24]
where is the energy split between the ground state and the excited state, and is the Pauli operator for the quantum battery . Typically, the quantum battery is constructed by a superconducting qubit, a quantum dot, an atom or an NV center in diamonds.
The Hamiltonian for a photonic crystal is given by[21, 33]
where is a classical field representing the amplitudes of photons at the site , where in the system composed of sites, describes a hopping matrix between the adjacent sites characterizing the photonic crystal, and is the characteristic frequency of the photonic crystal.
By using the rotational-wave approximation, the coupling between the quantum battery and the photonic crystal is given by
where means that the site is connected with the quantum battery and is the coupling constant. See Figure 1(aFigure 1 for the SSH model and Figure 1(bFigure 1 for the breathing-Kagome model as illustrations.
The corresponding equations of motion for the quantum battery are given by
while that for the photonic crystal is described by
where represents the loss; represents the amplitude of the optical gain via stimulated emission; represents the nonlinearity; stands for the optical pump introduced at the output site. The system turns into the linear model in the limit . The system turns into a Hermitian model for . We call the term proportional to the loss term and the term proportional to the nonlinear gain term[21, 33]. The gain is introduced by optical pumping. We introduce the gain only for the output sites . On the other hand, the loss is uniformly introduced for the all sites, which is contrasted in the original work, where the loss is introduced only for one sublattice. We set [39, 40], which is experimentally feasible[41, 42, 43]. We prepare the initial conditions, where and otherwise with respect to the photonic crystal in Figure 1(aFigure 1 and (b1), while the quantum battery is the ground state.
SSH model: A topological quantum battery was originally proposed based on the SSH model by using the resolvent method for the bulk system, where the loss is introduced selectively only at one sublattice and gain is not introduced. Here, we study the SSH model under different conditions, where the loss is introduced for all sites and the nonlinear gain is introduced selectively at the output site. We note that a topological laser based on the SSH model has been studied[25, 26, 27, 28, 29, 30, 31, 32, 33] under these conditions. We show the band structure for a finite chain in Figure 3(aFigure 2. We set the number of sites to be odd as shown in Figure 1(aFigure 1, where there is only one edge state in the topological phase.

Figure 2. (a1) Temporal evolution of the amplitude at the edge site of the topological quantum battery. (b1) Temporal evolution of the amplitude at the corner sites of the second-order topological quantum battery. (a2) Temporal evolution of the ergotropy of the topological quantum battery. (b2) Temporal evolution of the ergotropy of the second-order topological quantum battery. The vertical axis is the . (a3) Temporal evolution of the charging power of the topological quantum battery. (b3) Temporal evolution of the charging power of the second-order topological quantum battery. The vertical axis is the charging power . We have set , , and , where is the time unit and is the energy unit.
Figure 3. (a1) Maximum value of the ergotropy in the topological quantum battery. (b1) Maximum value of the ergotropy in the second-order topological quantum battery. The vertical axis is the . (a2) Energy spectrum in the SSH model made of a finite chain with topological edge states in red for . (b2) Energy spectrum of the breathing-Kagome model in triangle geometry with topological corner states in red for . (a3) Maximum value of the charging power for the topological quantum battery. (b3) Maximum value of the charging power in the second-order topological quantum battery. The vertical axis is the charging power . The horizontal axis is the dimerization parameter for (a1), (a2) and (a3). The horizontal axis is the trimerization parameter for (b1), (b2) and (b3).
The equations of motion are derived by setting to be the hopping matrix describing the SSH model. It follows from Eq. (7) that the explicit equations for a finite chain with length are given by
It is convenient to introduce the coupling strength and the dimerization parameter by
with . It is known that the system is topological for , where there is an edge state at the right-most edge site for odd number of sites. We show the spatial profile after relaxation in Figure 1(aFigure 2, where the topological edge state is formed at the right hand side even in the presence of the quantum battery. By numerically solving Eqs. (8) and (9), we show the dynamics of in Figure 2(aFigure 1.
Breathing Kagome model: Higher-order topological insulators are generalization of topological insulators[23, 34, 35, 36, 37, 38], where topological corner states emerge. A typical example is realized in the breathing-Kagome model[23], which is a second-order topological insulator. We illustrate the breathing-Kagome lattice in Figure 1(bFigure 1.
The hopping matrix is explicitly given by[23]
with
in the momentum space, where we have introduced two hopping parameters and corresponding to upward and downward triangles in Figure 1(b). The equations of motions follow explicitly from Eq. (7). It is known that the system is topological for , where the corner states emerge as shown in Figure 3(bFigure 2. On the other hand, it is metallic for and trivial for , where there is no corner state. We show the dynamics of in Figure 2(bFigure 1. We show the spatial profile after relaxation in Figure 1(bFigure 2, where two bottom corner states are enhanced. We note that the top corner state disappears due to the loss term.
Ergotropy: The ergotropy[13, 14] is a fundamental indicator measuring the performance of the quantum battery. It is the maximum amount of work that can be extracted from a quantum system. It is defined by
where is the energy for the quantum battery and is the energy for the passive state. They are defined as
where is the Hamiltonian (1) for the quantum battery, while is the density matrix for the quantum battery, and is that for the passive state. The passive state is such a state that has the minimum energy by making an arbitrary unitary transformation for by fixing in Eq. (16).
The passive state is constructed explicitly as follows[44].
We expand the density matrix for the quantum battery by using the Pauli matrices as
where is a scalar. Then, Eq. (16) reads
The eigenvalues of the density matrix is given by with . The passive state is constructed by assigning the larger eigenvalue to the lower-energy state and the smaller eigenvalue to the higher-energy state , which is
Then, Eq. (17) is calculated as
It gives the ergotropy (15) as
We have for the unitary evolution of the quantum battery. We obtain and by numerically solving Eqs. (4), (5), (6) and (7). We have due to the mirror symmetry.
We show the dynamics of the ergotropy in Figure 2(aFigure 2 for the topological quantum battery and Figure 2(bFigure 2 for the second-order topological quantum battery. They reach saturated oscillations, where the maximum value of the ergotropy is a marker of the quantum battery. The phases and amplitudes of the two quantum batteries are exactly identical due to the mirror symmetry of the configuration. The maximum values of the ergotropy after relaxation are shown as a function of in Figure 3(aFigure 1 and (b1). We find that they are zero for the trivial phase and nonzero for the topological phase. Especially, it is quantized sharply for the topological quantum battery as shown in Figure 3(aFigure 1. The agreement of the topological phase transition point and the sharp difference of the quantum battery is very good for small loss as indicated by red. Hence, the is a good topological-phase indicator.
Charging power
The charging power[4, 15, 16] is defined by the velocity of the ergotropy, that is
which measures how fast the quantum battery is charged. It is an important marker of the quantum battery because quick charging is required in quantum applications such as quantum amplifier of quantum internets or quantum error corrections in quantum computing. We show the dynamics of the charging power in Figure 2(aFigure 3 for the topological quantum battery and (b3) for the second-order topological quantum battery. The maximum value of the charging power is also an important marker of the quantum battery. We show the in Figure 3(aFigure 3 and (b3). They also show sharp difference between the topological and trivial phases.
Discussion
We have investigated a topological quantum battery based on the SSH model and a second-order topological quantum battery based on the breathing-Kagome lattice. In both systems, we introduce nonlinear gain selectively at the output sites and uniform loss across all sites, which have not been explored in previous studies[18, 19, 20]. These realistic non-Hermitian ingredients stabilize persistent oscillations of the quantum batteries. The maximum values of the ergotropy and the charging power exhibit sharp topological phase transitions, demonstrating that the topological edge and corner modes serve as highly efficient energy-storage channels.
In the second-order topological quantum battery, an intriguing feature emerges: two quantum batteries are charged coherently. Owing to the mirror symmetry of the breathing-Kagome triangle, the two batteries become phase-synchronized and acquire energy with the same phase, enabling coherent collective charging.
Our results naturally generalize to a third-order topological quantum battery realized in the breathing-Pyrochlore lattice[23], where three quantum batteries can be charged.
This work is supported by Grants-in-Aid for Scientific Research from MEXT KAKENHI (Grant No. 23H00171).
References
References
- [1]Robert Alicki and Mark Fannes, Entanglement boost for extractable work from ensembles of quantum batteries, Phys. Rev. E 87, 042123 (2013).pubmed.ncbi.nlm.nih.gov/23679388
- [2]Dario Ferraro, Michele Campisi, Gian Marcello Andolina, Vittorio Pellegrini, Marco Polini, High-power collective charging of a solid-state quantum battery, Phys. Rev. Lett. 120, 117702 (2018).DOI
- [3]Francesco Campaioli, Stefano Gherardini, James O. Quach, Marco Polini, and Gian Marcello Andolina, Colloquium: Quantum batteries, Rev. Mod. Phys. 96, 031001 (2024).DOI
- [4]Francesco Campaioli, Felix A. Pollock, Felix C. Binder, Lucas C. Coleri, John Goold, Sai Vinjanampathy, Kavan Modi, Enhancing the charging power of quantum batteries, Phys. Rev. Lett. 118, 150601 (2017).DOI
- [5]S. Seah, M. Perarnau-Llobet, G. Haack, N. Brunner, and S. Nimmrichter, Quantum Speed-Up in Collisional Battery Charging, Phys. Rev. Lett. 127, 100601 (2021).DOI
- [6]G. Zhu, Y. Chen, Y. Hasegawa, and P. Xue, Charging Quantum Batteries via Indefinite Causal Order: Theory and Experiment, Phys. Rev. Lett. 131, 240401 (2023).DOI
- [7]Ju-Yeon Gyhm, Dominik Šafranek, and Dario Rosa, Quantum Charging Advantage Cannot Be Extensive without Global Op- erations, Phys. Rev. Lett. 128, 140501 (2022).
- [8]X. Yang, Y.-H. Yang, M. Alimuddin, R. Salvia, S.-M. Fei, L.-M. Zhao, S. Nimmrichter, and M.-X. Luo, Battery Capacity of Energy-Storing Quantum Systems, Phys. Rev. Lett. 131, 030402 (2023).DOI
- [9]H.-L. Shi, S. Ding, Q.-K. Wan, X.-H. Wang, and W.-L. Yang, Entanglement, Coherence, and Extractable Work in Quantum Batteries, Phys. Rev. Lett. 129, 130602 (2022).DOI
- [10]Gian Marcello Andolina, Maximilian Keck, Andrea Mari, Michele Campisi, Vittorio Giovannetti, and Marco Polini, Extractable Work, the Role of Correlations, and Asymptotic Freedom in Quantum Batteries, Phys. Rev. Lett. 122, 047702 (2019).DOI
- [11]Juliette Monsel, Marco Fellous-Asiani, Benjamin Huard, and Alexia Auffeves, The Energetic Cost of Work Extraction, Phys. Rev. Lett. 124, 130601 (2020).DOI
- [12]Salvatore Tirone, Raffaele Salvia, Stefano Chessa, and Vittorio Giovannetti, Work Extraction Processes from Noisy Quantum Batteries: The Role of Nonlocal Resources, Phys. Rev. Lett. 131, 060402 (2023).DOI
- [13]A.E. Allahverdyan, R. Balian, Th.M. Nieuwenhuizen, Maximal work extraction from finite quantum systems, EPL 67, 565 (2004).DOI
- [14]Gianluca Francia, Felix C. Binder, Giacomo Guarnieri, Mark T. Mitchison, John Goold, Francesco Plastina, Quantum Coherence and Ergotropy, Phys. Rev. Lett. 125, 180603 (2020).
- [15]Felix C. Binder, Sai Vinjanampathy, Kavan Modi, John Goold, Quantacell: Powerful charging of quantum batteries, New J. Phys. 17 075015 (2015).DOI
- [16]P.G. Sreeram, J. Bharathi Kannan and M. S. Santhanam, Upper bounds on charging power and tangible advantage in quantum batteries, Appl. Phys. Lett. 128, 134002 (2026).DOI
- [17]F. Binder, L. A. Correa, C. Gogolin, J. Anders, and G. Adesso, Thermodynamics in the Quantum Regime: Fundamental Aspects and New Directions (Springer International Publishing, New York, 2018).
- [18]Zhi-Guang Lu, Guoqing Tian, Xin-You Lu and Cheng Shang, Topological Quantum Batteries, Phys. Rev. Lett. 134, 180401 (2025).DOI
- [19]Tanoy Kanti Konar, Leela Ganesh Chandra Lakkaraju and Aditi Sen (De), Quantum battery with non-Hermitian charging, Phys. Rev A 109, 042207 (2024).DOI
- [20]A-Long Zhou, Ya-Wen Xiao, Nuo Xu, Li-Li Gao, Long-Jie Li, Hang Zhou, Zi-Min Li and Chuan-Cun Shu, Topological enhancement of a PT-symmetric Su-Schrieffer-Heeger quantum battery, Phys. Rev A 113, 042213 (2026).DOI
- [21]G. Harari, M. A. Bandres, Y. Lumer, M. C. Rechtsman, Y. D. Chong, M. Khajavikhan, D. N. Christodoulides, M. Segev, Topological Insulator Laser: Theory, Science 359, eaar4003 (2018).
- [22]M. A. Bandres, S. Witek, G. Harari, M. Parto, J. Ren, Mordechai Segev, Demetrios N. Christodoulides, Mercedeh Khajavikhan, Topological Insulator Laser: Experiments, Science 359, 1231 (2018).
- [23]M. Ezawa, Higher-Order Topological Insulators and Semimetals on a Breathing Kagome and Pyrochlore Lattices, Phys. Rev. Lett. 120, 026801 (2018).DOI
- [24]L. P. Garcia-Pintos, A. Hamma, and A. del Campo, Fluctuations in Extractable Work Bound the Charging Power of Quantum Batteries, Phys. Rev. Lett. 125, 040601 (2020).
- [25]H. Schomerus, Topologically Protected Midgap States in Complex Photonic Lattices Opt. Lett. 38, 1912 (2013).DOI
- [26]S. Weimann, M. Kremer, Y. Plotnik, Y. Lumer, S. Nolte, K. G. Makris, M. Segev, M. C. Rechtsman and A. Szameit, Topologically Protected Bound States in Photonic Parity-Time-Symmetric Crystals, Nat. Mat. 16, 433 (2017).DOI
- [27]P. St-Jean, V. Goblot, E. Galopin, A. Lemaitre, T. Ozawa, L. Le Gratiet, I. Sagnes, J. Bloch and A. Amo, Lasing in Topological Edge States of a 1D Lattice, Nature Photonics 11, 651 (2017).
- [28]Y. Ota, R. Katsumi, K. Watanabe, S. Iwamoto and Y. Arakawa, Topological Photonic Crystal Nanocavity Laser, Communications Physics 1, 86 (2018).DOI
- [29]M. Parto, S. Witte k, H. Hodaei, G. Harari, M. A. Bandres, J. Ren, M. C. Rechtsman, M. Segev, D. N. Christodoulides and M. Khajavikhan, Edge-Mode Lasing in 1D Topological Active Arrays, Phys. Rev. Lett. 120, 113901 (2018).DOI
- [30]H. Zhao, P. Miao, M. H. Teimourpour, S. Malzard, R. El-Ganainy, H. Schomerus and L. Feng, Topological Hybrid Silicon Microlasers, Nat. Com. 9, 981 (2018).
- [31]S. Malzard and H. Schomerus, Nonlinear Mode Competition and Symmetry-Protected Power Oscillations in Topological Lasers, New J. Phys. 20, 063044 (2018).DOI
- [32]S. Malzard, E. Cancellieri, and H. Schomerus, Topological Dynamics and Excitations in Lasers and Condensates with Saturable Gain or Loss, Optics Express 26, 22506 (2018).
- [33]M. Ezawa, Nonlinear non-Hermitian higher-order topological laser, Phys. Rev. Research 4, 013195 (2022).DOI
- [34]W. A. Benalcazar, B. A. Bernevig, and T. L. Hughes, Quantized Electric Multipole Insulators, 10.1126/science.aah6442.
- [35]J. Langbehn, Y. Peng, L. Trifunovic, F. von Oppen, and P. W. Brouwer, Reflection-Symmetric Second-Order Topological Insulators and Superconductors, Phys. Rev. Lett. 119, 246401 (2017).DOI
- [36]Z. Song, Z. Fang, and C. Fang, (d-2)-Dimensional Edge States of Rotation Symmetry Protected Topological States, Phys. Rev. Lett. 119, 246402 (2017).DOI
- [37]W. A. Benalcazar, B. A. Bernevig, and T. L. Hughes, Electric Multipole Moments, Topological Multipole Moment Pumping, and Chiral Hinge States in Crystalline Insulators, Phys. Rev. B 96, 245115 (2017).DOI
- [38]F. Schindler, A. M. Cook, M. G. Vergniory, Z. Wang, S. S. P. Parkin, B. A. Bernevig, and T. Neupert, Higher-Order Topological Insulators, Science Advances 4, eaat0346 (2018).DOI
- [39]Kellen O’Brien, Maya Amouzegar, Won Chan Lee, Martin Ritter, Alicia J. Kollar, A Circuit-QED Lattice System with Flexible Connectivity and Gapped Flat Bands for Photon-Mediated Spin Models, PRX Quantum 7, 010321 (2026).
- [40]M. Ahumada, N. Valderrama-Quinteros, D. Tancara, and G. Romero, Single-excitation swap in a modified Jaynes-Cummings-Hubbard lattice, Phys. Rev. Applied 25, 064048 (2026).DOI
- [41]Franco Mangussi, Marijana Milicevi, Isabelle Sagnes, Luc Le Gratiet, Abdelmounaim Harouri, Aristide Lemaitre, Jacqueline Bloch, Alberto Amo and Gonzalo Usaj, Multi-orbital tight binding model for cavity-polariton lattices, J. Phys.: Condens. Matter 32, 315402 (2020).
- [42]Ze-Sheng Xu, Luil Li, Duran Yadgirk ar, Andrea Cataldo, Adrian Iovan, Jun Gao, Ali W. Elshaari, Bloch?Siegert physics in a reconfigurable photonic binary lattice, Photonics Research 14, 4596 (2026).
- [43]Won Chan Lee, Ali Fahimniya, Kellen O’Brien, Yu-Xin Wang, Alexandra Behne, Maya Amouzegar, Alexey V. Gorshkov, Alicia J. Kollar, Multimode Strong-Coupling Processes in Circuit QED Lattices, arXiv:2605.00983.arxiv.org/abs/2605.00983
- [44]W. Pusz and S. L. Woronowicz, Passive States and KMS States for General Quantum Systems, Commun. math. Phys. 58, 273 (1978).DOI
