betaFeedback

WorksMathematics

Phase-field approximation of sharp-interface energies accounting for lattice symmetry

Abstract

We present a phase-field approximation of sharp-interface energies defined on partitions, designed for modeling grain boundaries in polycrystals. The independent variable takes values in the orthogonal group O(d)\mathrm{O}(d) modulo a lattice point group G\mathcal{G}, reflecting the crystallographic symmetries of the underlying lattice. In the sharp-interface limit, the surface energy exhibits a Read-Shockley-type behavior for small misorientation angles, scaling as θ∣log⁡θ∣θ|\logθ|. The regularized functionals are applicable to grain growth simulation and the reconstruction of grain boundaries from imaging data.

Introduction

We investigate sharp-interface variational models for polycrystalline materials that fully respect the symmetry of the underlying lattice. The energy is defined on partitions of a domain, each subset – representing an individual grain – being endowed with an orientation modeled as an element of the quotient space O(d)/GO(d)/G. Here, G⊂O(d)G \subset O(d) is a finite point group describing the symmetries of a reference lattice, and the local orientation is measured relative to this reference. The total energy is given by an integral over the interfaces separating adjacent grains. The integrand, or surface energy density, depends on the orientations of the two neighboring grains and on the unit normal to the interface. To ensure that the class of piecewise-constant orientation fields is closed, we assume the energy density grows superlinearly as the misorientation angle tends to zero.

A distinctive feature of the model is that the orientation variable takes values in a manifold rather than a linear space. Classical analytical tools such as regularization, approximation, and interpolation are therefore not directly applicable, and a dedicated framework for manifold-valued fields is required.

Models of this type are widely used to study polycrystalline structures in metals and alloys, see, for instance, [13, 8, 26, 37] and references therein. Dependence on both orientations and lattice symmetry is likewise central to related problems such as polygonal partitions with prescribed area and minimal perimeter [24], and optimal quantization or location of measures [11, 12]. The point-group symmetry also enters variational models of fractional defects, see for example [6, 5, 31]. Analytical aspects such as semicontinuity and relaxation – though without an explicit treatment of the symmetry group G\mathcal{G} – have been addressed in [2, 34, 15].

The principal objective of this paper is to develop a diffuse-interface, or phase-field, approximation of the sharp-interface model described above. Specifically, we construct a phase-field approximation for surface energies with densities that vanish as the misorientation between grains tends to zero, but do so in a superlinear manner. Our approach builds on the model introduced for cohesive fracture in [19, 21]. The analysis relies on two key abstract ingredients. First, compactness properties are formulated within the framework of metric-space-valued generalizations of Sobolev spaces and spaces of functions of bounded variation, as developed in [36, 1]. Second, the construction of recovery sequences is based on a lifting theorem for BV functions taking values in compact manifolds, established in [14] (here we provide a simpler proof valid for our specific case, see Theorem 2.12). These tools allow us to rigorously prove the convergence of the phase-field approximation to the sharp-interface limit.

To describe the sharp-interface model in more detail, let {Ei}i\{E_i\}_i be a partition of a domain Ω⊂RN\Omega\subset\mathbb{R}^{N}, representing the material body. Each set EiE_i corresponds to an individual grain with assigned orientation Ri∈O(d)R_i \in\mathrm{O}(d), yielding a piecewise-constant function β=∑iχEiRi\beta= \sum_i \chi_{E_i}R_i as the order parameter. The grain boundaries are contained in the discontinuity set JβJ_\beta of β\beta and the corresponding energy is given by

∫JβΨ(R−,R+,νβ) dHN−1=∑i≠jHN−1(∂∗Ei∩∂∗Ej)Ψ(Ri,Rj,νij),(1)\int_{J_\beta} \Psi(R^{-}, R^{+}, \nu_\beta)\,\mathrm{d}\mathcal{H}^{N-1} = \sum_{i\ne j} \mathcal{H}^{N-1}(\partial^{*}E_i \cap\partial^{*}E_j)\Psi(R_i,R_j,\nu_{ij}), \tag*{(1)}

where Ψ:O(d)×O(d)×SN−1→[0,∞)\Psi: \mathrm{O}(d) \times\mathrm{O}(d) \times\mathbb{S}^{N-1} \to[0,\infty) is the surface energy density, νβ\nu_\beta denotes the measure-theoretic normal to JβJ_\beta, and νij\nu_{ij} is the normal to the intersection of the reduced boundaries ∂∗Ei∩∂∗Ej\partial^{*}E_i \cap\partial^{*}E_j. A natural function space for such energies is the space of Special functions with Bounded Variation with values in O(d)\mathrm{O}(d) and vanishing absolutely continuous part of the gradient,

SBV0(Ω;O(d)):={β∈SBV(Ω;O(d)):∇β=0}.(2)\mathrm{SBV}_{0}(\Omega;\mathrm{O}(d)) := \{\beta\in\mathrm{SBV}(\Omega;\mathrm{O}(d)) : \nabla\beta= 0\}. \tag*{(2)}

For the variational problems associated with (1.1) to be well-posed in this space, certain conditions on Ψ\Psi are required. In particular, lower semicontinuity of the energy follows from the BV-ellipticity of Ψ\Psi (see [3 Theorem 5.14]). Additionally, it is essential that SBV0(Ω;O(d))\mathrm{SBV}_{0}(\Omega;\mathrm{O}(d)) is sequentially closed under the relevant convergence. This requires that sequences with bounded energy cannot converge to fields with diffuse gradient. A sufficient condition is that Ψ\Psi has infinite slope at zero,

lim⁡∣R+−R−∣→0Ψ(R+,R−,ν)∣R+−R−∣=+∞\lim_{|R^{+}-R^{-}|\to0}\frac{\Psi(R^{+},R^{-},\nu)}{|R^{+}-R^{-}|}=+\infty

uniformly in ν\nu, see [3 Theorem 4.7]. Denoting by θ=∣R+−R−∣\theta=|R^{+}-R^{-}| the relative mismatch between neighboring grain orientations, the specific growth law θ∣log⁡θ∣\theta|\log\theta| of Ψ\Psi for small θ\theta was first identified by Read and Shockley in the ’50s [35]. In two dimensions, this scaling has been recently rigorously derived as the limit of a model that accounts for the elastic distortion induced by incompatibilities and crystal defects at the boundary, see [33, 28] and [27].

Since β\beta is interpreted as a field taking values in O(d)\mathrm{O}(d), invariance of Ψ\Psi under the action of G\mathcal{G} must be enforced. In particular, boundaries between regions whose orientations agree up to multiplication by an element of G\mathcal{G} are spurious, as they represent the same physical state, and do not contribute to the energy. Accordingly, we require Ψ(R,GR,ν)=0\Psi(R,\mathcal{G}R,\nu)=0 for all R∈O(d)R\in\mathrm{O}(d), G∈G\mathcal{G}\in\mathcal{G}, ν∈SN−1\nu\in\mathbb{S}^{N-1}, and, more generally,

Ψ(GR,G′R′,ν)=Ψ(R,R′,ν)for all R,R′∈O(d), G,G′∈G, ν∈SN−1.(3)\Psi(\mathcal{G}R,\mathcal{G}'R',\nu)=\Psi(R,R',\nu)\qquad\text{for all }R,R'\in\mathrm{O}(d),\ \mathcal{G},\mathcal{G}'\in\mathcal{G},\ \nu\in\mathbb{S}^{N-1}. \tag*{(3)}

It is important to note that, even in simple examples, this invariance cannot be removed by prescribing a consistent choice of the representative for each orientation class. See Figure 1 for an illustration.

Sketch of a possible configuration

Figure 1. Sketch of a possible configuration. Left: the dots represent the local lattice orientation in a polycrystal with five grains, labeled (a), (b), (c), (d), (e). Around each interface, a possible orientation of the two basis vectors is illustrated; each interface has a change of orientation of 18 degrees. However, these changes accumulate, and if one starts with a given orientation (interface (a) − (b)) then the orientation after five interfaces differs from the initial one by 90 degrees, leading to a fictitious interface, for instance across the dashed red line in grain (a). On the right, the explicit rotation matrices are indicated (angles in degrees).

The goal of this paper is to construct variational phase-field models which converge to sharp-interface energies of the form (1). Our approximation respects the invariance under the lattice point-group GG, and reproduces the Read-Shockley superlinear scaling θ∣log⁡θ∣\theta\lvert\log\theta\rvert for small misorientation angles. The approach is motivated and inspired by the algorithms used in [8, 26] for the segmentation of polycrystalline images.

Phase-field methods are widely employed in numerical simulations of sharp-interface energies, and, more in general, of free-discontinuity problems. By replacing discontinuity sets with narrow diffuse layers, they avoid the need to track interfaces explicitly and permit to use standard finite-element discretizations designed for Sobolev functions. Classical applications include image reconstruction [17, 9, 10] and fracture mechanics [29, 25, 16, 30, 38, 32].

This strategy originated with the Ambrosio-Tortorelli approximation of the Mumford-Shah functional [4], in which the surface energy density depends solely on the measure of the jump set, and not on the jump amplitude. More recently, a number of phase-field approximations for cohesive fracture and segmentation energies – where the surface energy may depend on the opening – have been rigorously developed, see for instance [22, 19, 18, 20, 21].

We approximate sharp-interface energies with superlinear density Ψ\Psi following the approach introduced in [19, 21], with the key additional challenge of incorporating the group invariance, which we describe in more detail below. Two further technical distinctions are worth noting: first, to recover the Read-Shockley scaling law, we adapt the construction from [19 Section 7], [21], originally designed for general superlinear power-law growth at small openings. Second, we introduce a penalization term – similar to that in [18] for the approximation of piecewise rigid motions with brittle interface energy – to ensure that the diffuse gradient vanishes in the limit.

Formulation of the main results

Let Ω⊂RN\Omega\subset\mathbb{R}^{N}, N≥1N \ge1, be a bounded connected set with Lipschitz boundary, and let G⊂O(d)\mathcal{G} \subset O(d), for d≥2d \ge2, be a finite group, possibly with d≠Nd \ne N. We define the space of admissible order parameters that encode the lattice symmetry as

SBVG(Ω;Md×d):={β∈SBV2(Ω;Md×d):β+(x)∈Gβ−(x) for HN−1-a.e. x∈Jβ},(4)\mathrm{SBV}_{\mathcal{G}}(\Omega;\mathbb{M}^{d \times d}) := \left\{\beta\in\mathrm{SBV}^{2}(\Omega;\mathbb{M}^{d \times d}): \beta^{+}(x) \in\mathcal{G}\beta^{-}(x)\ \text{for }\mathcal{H}^{N-1}\text{-a.e. }x \in J_{\beta}\right\}, \tag*{(4)}

i.e., the set of all SBV functions such that HN−1(Jβ)<∞\mathcal{H}^{N-1}(J_{\beta}) < \infty, ∇β∈L2\nabla\beta\in L^{2}, and the traces on the jump set differ only by multiplication by an element of G\mathcal{G} (we will sometimes say simply “jump in G\mathcal{G}” for brevity).

For ε>0\varepsilon> 0 and an open set A⊂ΩA \subset\Omega we consider the energy

Fεred(β,v;A):={∫Afε2(v)∣∇β∣2 dx+PFε(v;A)in SBVG(Ω;Md×d)×H1(Ω;[0,1]),+∞otherwise in L1(Ω;Md×d)×L1(Ω),(5)\mathcal{F}^{\mathrm{red}}_{\varepsilon}(\beta,v;A) := \begin{cases} \int_{A} f_{\varepsilon}^{2}(v)|\nabla\beta|^{2}\,dx+\mathrm{PF}_{\varepsilon}(v;A) & \text{in }\mathrm{SBV}_{\mathcal{G}}(\Omega;\mathbb{M}^{d \times d}) \times H^{1}(\Omega;[0,1]),\\ +\infty& \text{otherwise in }L^{1}(\Omega;\mathbb{M}^{d \times d}) \times L^{1}(\Omega), \end{cases} \tag*{(5)}

where PFε\mathrm{PF}_{\varepsilon} is a Modica-Mortola type energy and is given by

PFε(v;A):=∫A((1−v)24ε+ε∣∇v∣2) dx,v∈H1(Ω;[0,1]).(6)\mathrm{PF}_{\varepsilon}(v;A):=\int_{A}\left(\frac{(1-v)^{2}}{4\varepsilon}+\varepsilon|\nabla v|^{2}\right)\,dx,\qquad v\in H^{1}(\Omega;[0,1]). \tag*{(6)}

We notice that Fεred\mathcal{F}^{\mathrm{red}}_{\varepsilon} is finite on the space SBVG\mathrm{SBV}_{\mathcal{G}}, and jumps in G\mathcal{G} of the order parameter β\beta do not contribute to the energy. As in the models proposed in [19, 21], the choice of the prefactor fεf_{\varepsilon} in front of ∣∇β∣2|\nabla\beta|^{2}, the so-called damage coefficient, is crucial to capture the desired behavior of the limiting surface energy density. At variance with [19, 21], and following [18], we allow fεf_{\varepsilon} to take large values, enforcing that the limit fields have no diffuse gradient. More precisely, we set

fε(s):=Mε∧εf(s) for s∈[0,1[,fε(1)=Mε,lim⁡ε→0+Mε=+∞,(7)f_{\varepsilon}(s):=M_{\varepsilon}\wedge\sqrt{\varepsilon}f(s)\ \text{for }s\in[0,1[,\qquad f_{\varepsilon}(1)=M_{\varepsilon},\qquad\lim_{\varepsilon\to0^{+}}M_{\varepsilon}=+\infty, \tag*{(7)}

where f∈C([0,1[;[0,+∞[)f\in C([0,1[;[0,+\infty[) is a nondecreasing function satisfying f−1(0)={0}f^{-1}(0)=\{0\}, and

ℓ:=lim⁡s→1−1−s∣log⁡(1−s)∣f(s)>0,(8)\ell:=\lim_{s\to1^{-}}\frac{1-s}{|\log(1-s)|}f(s)>0, \tag*{(8)}

as for example

f(s)=ℓ∣log⁡(1−s)∣1−s.f(s)=\ell\frac{|\log(1-s)|}{1-s}.

The singularity of ff at 1 induces the logarithmic superlinear behaviour of the surface tension at small openings (cf. Proposition 4.4), while the truncation by the diverging sequence MεM_{\varepsilon} ensures the condition ∇β=0\nabla\beta=0 in the domain of the Γ\Gamma-limit (see Theorem 3.2 and Theorem 3.3).

Finally, we introduce a penalization term that asymptotically forces the limit fields to take values in O(d)O(d). To this end, we consider an additional positive parameter δε→0+\delta_{\varepsilon}\to0^{+} and define the modified energy

Fε(β,v;A):=Fεred(β,v;A)+1δε∫Adist⁡2(β,O(d)) dx.(9)\mathcal{F}_{\varepsilon}(\beta,v;A):=\mathcal{F}^{\mathrm{red}}_{\varepsilon}(\beta,v;A)+\frac{1}{\delta_{\varepsilon}}\int_{A}\operatorname{dist}^{2}(\beta,O(d))\,dx. \tag*{(9)}

We shall show that limiting behavior of the energies Fε\mathcal{F}_{\varepsilon} depends only on the asymptotic ratio

λ:=lim⁡ε→0εδε∈[0,+∞],(10)\lambda:=\lim_{\varepsilon\to0}\frac{\varepsilon}{\delta_{\varepsilon}}\in[0,+\infty], \tag*{(10)}

References

  1. [1]L. Ambrosio, Metric space valued functions of bounded variations, Ann. Scuola Norm. Sup. Pisa Cl. Sci., 17 (1990), pp. 439–478.
  2. [2]L. Ambrosio and A. Braides, Functionals defined on partitions in sets of finite perimeter II: semicontinuity, relaxation, homogenization, Journal de Mathématiques Pures et Appliquées, 69 (1990), pp. 307–333.
  3. [3]L. Ambrosio, N. Fusco, and D. Pallara, Functions of bounded variation and free discontinuity problems, Oxford Mathematical Monographs, The Clarendon Press, Oxford University Press, New York, 2000.
  4. [4]L. Ambrosio and V. M. Tortorelli, Approximation of functionals depending on jumps by elliptic functionals via Γ-convergence, Comm. Pure Appl. Math., 43 (1990), pp. 999–1036.
  5. [5]R. Badal and M. Cicalese, Renormalized energy between fractional vortices with topologically induced free discontinuities on 2-dimensional Riemannian manifolds, Calc. Var. Partial Differential Equations, 64 (2025), pp. Paper No. 83, 67.
  6. [6]R. Badal, M. Cicalese, L. De Luca, and M. Ponsiglione, Γ-convergence analysis of a generalized XY model: fractional vortices and string defects, Comm. Math. Phys., 358 (2018), pp. 705–739.DOI
  7. [7]G. Bellettini, A. Chambolle, and M. Goldman, The Γ-limit for singularly perturbed functionals of Perona-Malik type in arbitrary dimension, Math. Models Methods Appl. Sci., 24 (2014), pp. 1091–1113.
  8. [8]B. Berkels, A. Rätz, M. Rumpf, and A. Voigt, Extracting grain boundaries and macroscopic deformations from images on atomic scale, Journal of Scientific Computing, 35 (2008), pp. 1–23.DOI
  9. [9]B. Bourdin, G. A. Francfort, and J.-J. Marigo, Numerical experiments in revisited brittle fracture, Journal of the Mechanics and Physics of Solids, 48 (2000), pp. 797–826.DOI
  10. [10]B. Bourdin, G. A. Francfort, and J.-J. Marigo, The variational approach to fracture, J. Elasticity, 91 (2008), pp. 5–148.
  11. [11]D. P. Bourne, M. A. Peletier, and S. M. Roper, Hexagonal patterns in a simplified model for block copolymers, SIAM J. Appl. Math., 74 (2014), pp. 1315–1337.
  12. [12]E. Caglioti, F. Golse, and M. Iacobelli, Quantization of probability distributions and gradient flows in space dimension 2, Ann. Inst. H. Poincaré C Anal. Non Linéaire, 35 (2018), pp. 1531–1555.DOI
  13. [13]J. W. Cahn and J. E. Taylor, A unified approach to motion of grain boundaries, relative tangential translation along grain boundaries, and grain rotation, Acta Materialia, 52 (2004), pp. 4887–4898.DOI
  14. [14]G. Canevari and G. Orlandi, Lifting for manifold-valued maps of bounded variations, J. Funct. Anal., 278 (2020), pp. 108453–108469.
  15. [15]D. G. Caraballo, Crystals and polycrystals in ℝⁿ: lower semicontinuity and existence, Journal of Geometric Analysis, 18 (2008), pp. 68–88.DOI
  16. [16]P. Carrara, M. Ambati, R. Alessi, and L. De Lorenzis, A framework to model the fatigue behavior of brittle materials based on a variational phase-field approach, Comput. Methods Appl. Mech. Engrg., 361 (2020), pp. 112731, 29.
  17. [17]A. Chambolle, Image segmentation by variational methods: Mumford and Shah functional and the discrete approximations, SIAM Journal on Applied Mathematics, 55 (1995), pp. 827–863.DOI
  18. [18]M. Cicalese, M. Focardi, and C. I. Zeppieri, Phase-field approximation of functionals defined on piecewise-rigid maps, J. Nonlinear Sci., 31 (2021), pp. Paper No. 78, 25.DOI
  19. [19]S. Conti, M. Focardi, and F. Iurlano, Phase field approximation of cohesive fracture models, Ann. Inst. H. Poincaré Anal. Non Linéaire, 33 (2016), pp. 1033–1067.
  20. [20]——, Phase field approximation of a vectorial, geometrically nonlinear cohesive fracture energy, Arch. Rational Mech. Anal., 248 (2024), pp. 1–60.
  21. [21]——, Superlinear free-discontinuity models: relaxation and phase field approximation, Preprint arXiv:2505.00852, (2025).arxiv.org/abs/2505.00852
  22. [22]G. Dal Maso and F. Iurlano, Fracture models as Γ-limits of damage models, Commun. Pure Appl. Anal., 12 (2013), pp. 1657–1686.
  23. [23]J. Dávila and R. Ignat, Lifting of BV functions with values in S¹, Comptes Rendus Mathematique, 337 (2003), pp. 159–164.DOI
  24. [24]G. Del Nin, Some asymptotic results on the global shape of planar clusters, PhD Thesis, Università di Pisa, (2019).
  25. [25]G. Del Piero, One-dimensional ductile-brittle transition, yielding, and structured deformations, in Variations of domain and free-boundary problems in solid mechanics (Paris, 1997), vol. 66 of Solid Mech. Appl., Kluwer Acad. Publ., Dordrecht, 1999, pp. 203–210.DOI
  26. [26]M. Elsey and B. Wirth, Fast automated detection of crystal distortion and crystal defects in polycrystal images, Multiscale Model. Simul., 12 (2014), pp. 1–24.DOI
  27. [27]S. Fanzon, M. Palombaro, and M. Ponsiglione, Derivation of linearized polycrystals from a two-dimensional system of edge dislocations, SIAM Journal on Mathematical Analysis, 51 (2019), pp. 3956–3981.DOI
  28. [28]M. Fortuna, A. Garroni, and E. Spadaro, On the Read-Shockley energy for grain boundaries in polycrystals, Comm. Pure Appl. Math., 78 (2025).
  29. [29]G. A. Francfort and J.-J. Marigo, Revisiting brittle fracture as an energy minimization problem, J. Mech. Phys. Solids, 46 (1998), pp. 1319–1342.
  30. [30]F. Freddi and F. Iurlano, Numerical insight of a variational smeared approach to cohesive fracture, J. Mech. Phys. Solids, 98 (2017), pp. 156–171.DOI
  31. [31]M. Goldman, B. Merlet, and V. Millot, A Ginzburg-Landau model with topologically induced free discontinuities, Ann. Inst. Fourier (Grenoble), 70 (2020), pp. 2583–2675.
  32. [32]H. Lammen, S. Conti, and J. Mosler, A finite deformation phase field model suitable for cohesive fracture, J. Mech. Phys. Solids, 178 (2023), p. 105349. doi: 10.1016/j.jmps.2023.105349.DOI
  33. [33]G. Lauteri and S. Luckhaus, An energy estimate for dislocation configurations and the emergence of cosserat-type structures in metal plasticity, Preprint, https://arxiv.org/abs/1608.06155v2, (2016).
  34. [34]F. Morgan, Lower semicontinuity of energy clusters, Proceedings of the Royal Society of Edinburgh Section A: Mathematics, 127 (1997), pp. 819–822.
  35. [35]W. Read and W. Shockley, Dislocation models of crystal grain boundaries, Physical Review, 78 (1950), pp. 275–289.
  36. [36]Y. G. Reshetnyak, Sobolev-type classes of functions with values in a metric space, Siberian Math J., 38 (1997), pp. 567–583.DOI
  37. [37]B. Runnels, I. Beyerlein, S. Conti, and M. Ortiz, An analytical model of interfacial energy based on a lattice-matching interatomic energy, J. Mech. Phys. Solids, 89 (2016), pp. 174–193.DOI
  38. [38]J.-Y. Wu, V. P. Nguyen, C. T. Nguyen, D. Sutula, S. Sinaie, and S. P. Bordas, Phase-field modeling of fracture, Advances in applied mechanics, 53 (2020), pp. 1–183.

Paper details

vlnc:W_d9hwrjvr
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Mathematics

Not recorded for this paper

View statement
Looking for related papers…
Contents