WorksPhysics and Astronomy
Current-driven transient dynamics of magnetic-octupole domain walls in noncollinear antiferromagnets
Abstract
Current-driven magnetic-octupole domain walls in noncollinear antiferromagnets are promising for fast spintronic devices, yet their transient dynamics are not yet fully understood. Here, we investigate spin-orbit-torque-driven domain-wall motion in MnSn using a multipole micromagnetic framework. The three symmetry-related 60° walls exhibit equivalent current-driven dynamics, unlike their field-driven motion. For a representative 60° wall, the post-pulse motion is governed by relaxation of the current-induced rotation of the surrounding octupole domains, with a characteristic time of approximately 33 ps quantitatively captured by a uniform-domain analytic model. By resolving spatially nonuniform texture dynamics beyond this analytic description, the simulations further reveal an additional slow relaxation in a composite 180° wall associated with the relative motion of its constituent walls. The post-pulse response also varies systematically with the exchange stiffness and magnetic anisotropies. These results identify distinct domain and internal-coordinate relaxation channels and establish the intrinsic time scales governing pulse-controlled positioning of magnetic-octupole domain walls in antiferromagnetic spintronic devices.
Introduction
Current-driven domain-wall motion underpins proposed spintronic architectures for memory, logic, and unconventional computing [1, 2, 3, 4, 5, 6]. Antiferromagnets are attractive because they offer ultrafast dynamics and weak stray fields [7, 8, 9, 10]. However, their small net magnetization makes electrical detection and manipulation challenging. Noncollinear antiferromagnets provide a distinct opportunity because their spin textures can be represented by cluster magnetic multipoles that govern macroscopic responses such as the anomalous Hall, Nernst, magneto-optical Kerr, and spin Hall effects [11, 12, 13, 14, 15]. In , the inverse triangular spin structure is described by a cluster magnetic-octupole order parameter, and magnetic domains correspond to different orientations of this octupole moment. Magnetic-octupole domains and domain walls have been detected through Hall and Nernst transport, directly visualized by magneto-optical imaging, and manipulated using magnetic fields and electrical currents [13, 16, 17, 18, 19]. Recent studies have demonstrated experimentally and theoretically that magnetic-octupole domain walls in noncollinear antiferromagnets can exhibit fast current-driven motion, highlighting their potential for electrically controlled antiferromagnetic domain-wall devices [18, 20, 21, 22].
The transient response of a domain wall after a driving force is applied or removed can reveal dynamical memory associated with the relaxation of the wall profile or other coupled degrees of freedom. In conventional ferromagnets, deformation of a moving wall can be described in terms of a Döring-like effective mass, giving rise to finite acceleration and deceleration times [23, 24, 25, 26, 27]; inertial effects have also been predicted to govern switching in antiferromagnets [28]. Using a multipole micromagnetic framework, we recently
showed that field-driven magnetic-octupole domain walls in $\mathrm{Mn}_3\mathrm{Sn}$ deform and acquire a Döring-like effective mass [29]. Current-induced spin-orbit torque, however, acts simultaneously on the wall and the surrounding octupole domains. Previous theoretical work has investigated the SOT-driven dynamics of spatially uniform $\mathrm{Mn}_3\mathrm{Sn}$, including its response to current pulses {citep}[30]`. How these uniform order-parameter dynamics couple to the translational motion of a spatially nonuniform texture, and how additional internal degrees of freedom modify the transient response of a composite wall, remains unresolved.
Here, we investigate the current-driven transient dynamics of magnetic-octupole domain walls in using a multipole micromagnetic model. We first show that, unlike field-driven motion, spin-orbit torque produces identical steady-state and transient dynamics for the three symmetry-related types of walls. For a representative wall, a dc current drives steady translational motion, whereas pulse termination produces a finite velocity relaxation and post-pulse displacement. We show that this delayed response is governed by the relaxation of the current-induced rotation of the surrounding octupole domains and that its characteristic time is consistent with the uniform-domain relaxation determined by the damping and sixfold anisotropy. We further show that a wall behaves as a composite object consisting of three coupled walls. Its post-pulse dynamics exhibit a fast domain-relaxation component and an additional slow mode associated with the relative separations among the constituent walls. These results reveal distinct relaxation mechanisms governing the transient motion of current-driven magnetic-octupole domain walls.
Model
We simulate the current-driven dynamics of magnetic-octupole domain walls using the multipole micromagnetic framework developed for [29]. In this framework, the noncollinear spin configuration within each magnetic unit cell is represented by a vector-like cluster magnetic-octupole order parameter, Figure 1(a), and the corresponding coarse-grained field describes spatially varying octupole textures. The dynamics of are calculated using the octupole equation of motion,
Figure 1. Magnetic-octupole domain wall and dc-current-driven motion in MnSn. (a) Inverse-triangular spin structure and the corresponding cluster magnetic-octupole order parameter . (b) Representative equilibrium profile of a 60° wall connecting domains with and . (c) Heavy-metal/MnSn bilayer geometry, where generates a spin current with . (d) Domain-wall displacement under different . (e) Steady-state velocity as a function of .
with an effective field,
where is the out-of-plane component of the spin-polarization direction ( in the present geometry), is the magnetic-unit-cell density, is the in-plane orientation of the octupole order, and is the coarse-grained octupole energy density containing the exchange and in-plane anisotropy contributions. Here, is the in-plane charge-current density in the adjacent heavy-metal layer, and the second term represents the corresponding spin-orbit torque. Note that the Dzyaloshinskii–Moriya contribution is included in the exchange stiffness [29].
Unless otherwise stated, we use the same material parameters as in Ref. [29]: an effective octupole magnetization of , a sixfold in-plane anisotropy constant of , and exchange stiffness constants of and . Here denotes the full sixfold anisotropy-barrier height, such that . We use a Gilbert damping constant of , a sublattice moment of , and a gyromagnetic ratio of . Note that is the effective magnetization associated with the octupole order and is numerically equal to the small net ferromagnetic-moment density. For the spin-orbit-torque-driven simulations, we use a spin Hall angle of , a MnSn thickness of , and a spin polarization . The spin-orbit torque is treated as an effective torque averaged over the MnSn thickness, representing the net torque transferred to the exchange-coupled magnetic order without explicitly resolving its spatial variation along the film thickness.
Unless otherwise noted, the sixfold anisotropy is the only in-plane anisotropy in Sec. III; the twofold term is introduced only for the composite 180° wall in Secs. IV and V. The simulations are performed on a one-dimensional grid along with a cell size of and a total length of , using periodic boundary conditions in the - and -directions and free boundary conditions along . The wall position is obtained by linear interpolation of the octupole-angle profile between neighboring cells.
Current-driven motion of a 60° octupole domain wall
We first consider the three symmetry-related types of 60° magnetic-octupole domain walls connecting the and , and , and and domains. Our simulations show that all three walls exhibit identical steady-state and transient dynamics under the present spin-orbit-torque geometry. This equivalence follows from the symmetry of the driving term. Because the spin polarization is normal to the kagome plane, the spin-orbit torque is invariant under the transformation , which maps the three wall types onto one another. In contrast, an in-plane magnetic field couples to the absolute orientation of the octupole order and renders the three walls dynamically inequivalent [29]. We therefore focus below on the representative wall between the and domains Figure 1(b). In the heavy-metal/MnSn bilayer geometry, an in-plane charge-current density generates a transverse spin current that is injected into MnSn with spin polarization . The resulting spin-orbit torque drives the magnetic-octupole domain wall Figure 1(c). The instantaneous wall position is defined as the position at which the local octupole angle equals the average orientation of the two surrounding domains,
where and are the octupole angles far from the wall on its left and right sides, respectively. The domain-wall velocity is defined as .
We first examine the motion of a 60° magnetic-octupole domain wall under a dc current. For all current densities considered, the wall displacement increases linearly with time Figure 1(d), demonstrating steady translational motion driven by spin-orbit torque. The slope of increases with , and the steady-state velocity extracted from the slopes, , increases linearly with the applied current density Figure 1(e). All current densities considered here lie well below the threshold for continuous octupole rotation, , so that the surrounding domains remain close to their equilibrium orientations throughout and the wall moves in a steady, nonprecessional regime [29].
Next, we investigate the transient dynamics of the 60° magnetic-octupole domain wall using a rectangular current pulse with a duration of 5 ns. The pulse duration is much longer than the relevant relaxation times, ensuring that the wall reaches its steady-state velocity before pulse termination. Upon pulse termination at , the domain-wall velocity decays over a finite time rather than vanishing immediately Figure 2(a). The residual velocity drives continued wall motion after the current is removed, producing a finite post-pulse displacement, .
Figure 2. Transient dynamics of a 60° magnetic-octupole domain wall under pulsed-current excitation. (a) Domain-wall velocity for a 5-ns current pulse with . (b) Post-pulse velocity decay for several current densities, plotted as a function of . Solid lines are single-exponential fits, yielding . (c) Post-pulse displacement as a function of the velocity at pulse termination. The linear fit yields . (d) Schematic octupole-angle profiles during steady-state motion and after relaxation, illustrating the residual domain rotation and the resulting post-pulse displacement. (e) Domain-wall velocity as a function of the current-induced average rotation of the surrounding domains, . Data for different current densities collapse onto a single curve.
The velocity transients following pulse termination are well described by an exponential decay,
where denotes the pulse-off time and is the velocity-relaxation time. As shown in Figure 2(b), this form reproduces the post-pulse velocity decay, yielding a characteristic relaxation time of that is essentially independent of the applied current density. The same relaxation time governs the onset of the motion: the velocity rise following the leading edge of the pulse, , is the exact mirror of the post-pulse decay of Eq. (4), with the same within the fitting accuracy. For an exponential decay, the corresponding post-pulse displacement is
Consistent with Eq. (5), increases linearly with the velocity at pulse termination Figure 2(c). The slope yields , in excellent agreement with the velocity-relaxation time obtained independently from the velocity decay. This agreement provides a consistency check of the single-exponential description and confirms that integration of the residual velocity quantitatively accounts for the observed post-pulse displacement.
To identify the origin of the delayed wall motion, we examine the current-induced rotation of the octupole domains on the two sides of the wall. During current-driven motion, the orientations and deviate from their equilibrium values while their angular difference remains fixed at 60° Figure 2(d). The two domains therefore undergo a common rotation rather than changing their relative orientation.
We characterize this collective domain rotation by
where is the instantaneous average orientation used in Eq. (3), and is its equilibrium value. After pulse termination, the residual domain rotation therefore sustains the wall motion until the surrounding domains return to equilibrium, as illustrated in Figure 2(d).
The characteristic relaxation time of the surrounding domains can be obtained analytically from the uniform-octupole equation of motion derived in Ref. [29]. Writing and linearizing the sixfold anisotropy about an equilibrium orientation gives an overdamped relaxation, , with
where is the magnetic-unit-cell density. For the parameters used here, Eq. (7) gives ps. The velocity-relaxation time of the domain wall, ps [Fig. 2(b)], agrees with . This confirms that the uniform in-plane octupole degree of freedom supports a single relaxational mode within the present reduced model. Equation (7) shows that the relaxation is set entirely by material parameters, [31].
This behavior follows directly from a collective-coordinate description of the wall. Writing , where is the equilibrium wall profile, the wall velocity is then set by the instantaneous domain rotation alone,
where nm is the 60° wall width [29]. Note that all angles in equations are expressed in radians, whereas the figures use degrees.
Equation (8) shows that the instantaneous wall velocity is determined by the rotation of the surrounding domains rather than directly by the applied current. The predicted slope of 116 m s per degree of domain rotation is in quantitative agreement with Figure 2(e). After pulse termination, the residual domain rotation decays as . Combining this relaxation with Eq. (8) and integrating the resulting velocity gives
The explicit relaxation-time dependence therefore cancels. For a given residual domain rotation, the post-pulse displacement is independent of the damping, while the exchange stiffness and sixfold anisotropy enter through the wall width . Equation (9) predicts approximately 3.8 nm of post-pulse displacement per degree of residual domain rotation, consistent with the product of the independently obtained slopes in Figure 2(c) and Figure 2(e).
Current-driven motion of a 180° octupole domain wall
We next examine the dynamics of a 180° magnetic-octupole domain wall. Owing to the sixfold in-plane anisotropy of MnSn, a 180° wall forms a staircase-like structure consisting of three coupled 60° walls [17, 29]. In the absence of magnetostatic energy or an additional anisotropy, however, the relative separations between the constituent walls are not uniquely determined. To stabilize the composite wall structure, we introduce an additional twofold anisotropy along the direction, as in our previous work [29],
where and denote the sixfold and twofold anisotropy barriers, respectively. We use J m, corresponding to approximately 27% of J m. Such a twofold anisotropy can be induced in MnSn by in-plane tensile strain [32, 33, 34, 35, 36].
The equilibrium profile of the resulting 180° wall is shown in Figure 3(a). The wall position is defined using Eq. (3), with and taken from the far-left and far-right domains, respectively. Under a dc current, the composite wall undergoes steady translational motion, and its steady-state velocity increases with [Fig. 3(b)].
Figure 3. Current-driven dynamics of a 180° magnetic-octupole domain wall. (a) Equilibrium octupole-angle profile of the domain wall, showing the wall position , the constituent-wall positions and , and the internal separations and . (b) Steady-state velocity as a function of . (c) Domain-wall velocity under a 5-ns current pulse with A m. (d) Post-pulse velocity decay fitted by fast and slow exponential components with relaxation times and . (e) Current-density dependence of and , with average values of approximately 25.8 ps and 225.5 ps, respectively. (f) Post-pulse displacement as a function of . The linear fit yields ps.
We next apply a rectangular current pulse with a duration of 5 ns. During the pulse, the wall velocity approaches a steady-state value, whereas after pulse termination it decays gradually toward zero [Fig. 3(c)]. In contrast to the single-exponential relaxation of the 60° wall, the post-pulse velocity of the 180° wall cannot be described by a single relaxation time. Instead, it is well reproduced by a sum of two exponential components,
for , where and are the amplitudes of the fast and slow components, respectively, and and are their corresponding relaxation times. As shown in Figure 3(d), the fast component governs the initial velocity decay, while the slow component produces a longer relaxation tail.
Both relaxation times depend only weakly on the applied current density [Fig. 3(e)]. Their average values are ps and ps. The fast relaxation time is of the same order as the velocity-relaxation time of the wall, but it is about 20% shorter than the uniform-domain value ps. The slow time scale is nearly one order of magnitude larger. Since the uniform in-plane octupole coordinate supports only a single relaxation mode within the present model, the appearance of two time scales, together with the shift of the faster one away from , indicates that the translational motion of the composite wall is coupled to additional internal degrees of freedom that are absent for an isolated wall.
For the double-exponential relaxation, the post-pulse displacement is given by
Because the velocity at pulse termination is , an effective displacement-relaxation time can be defined as
such that , with ps from the fitted amplitudes. Consistent with this relation, increases linearly with the velocity at pulse termination [Fig. 3(f)], and the slope yields ps. The two values of are considerably larger than : although the slow component carries only about 14% of the velocity at pulse termination, its nearly ninefold longer relaxation time makes it responsible for more than half of the total post-pulse displacement.
Internal dynamics of a 180° domain wall
To investigate the internal dynamics accompanying the slow relaxation of the wall, we track the relative positions of its three constituent walls. As shown in Figure 3(a), we define and as the positions satisfying
respectively, where is the overall wall position defined by Eq. (3). The two internal separations are then defined as
These quantities characterize the relative separations among the three constituent walls while remaining insensitive to a common rotation of the surrounding octupole domains.
Figure 4(a) schematically compares the octupole-angle profiles during steady-state motion and after relaxation following pulse termination. During current-driven motion, and become unequal, indicating an asymmetric deformation of the domain wall. Because isolated domain walls exhibit equivalent current-driven motion, this asymmetry suggests that the additional twofold anisotropy and the mutual coupling among the three constituent walls govern the internal deformation of the composite wall. After the current is removed, the two separations return toward their common equilibrium value while the wall undergoes an additional displacement .
Figure 4. Internal separation dynamics and tunability of the post-pulse motion of a 180° magnetic-octupole domain wall. (a) Octupole-angle profiles during steady-state motion and after relaxation following pulse termination. The internal separations are defined as and . During current-driven motion, and become unequal; after pulse termination, they return toward equilibrium while the wall undergoes an additional displacement . (b) Time evolution of and for , with relaxation times ps and ps. (c)–(e) Dependence of on , , and , respectively.
The time evolutions of and are shown in Figure 4(b) for . During the current pulse, decreases while increases from their equilibrium values. Following pulse termination at ns, both separations relax toward equilibrium, with characteristic time scales of ps and ps. These time scales are approximately one order of magnitude longer than the fast velocity-relaxation time and are close to the slow component ps. Together with the single relaxation mode of the uniform in-plane octupole coordinate, this correspondence supports the assignment of the fast and slow velocity components predominantly to the domain-rotation and antisymmetric internal-separation channels, respectively. The coupling of these two relaxation channels accounts for the double-exponential velocity response in Eq. (11).
We finally examine the parameter dependence of the post-pulse motion of the 180° wall by varying , , and while keeping the pulse conditions and all other independent parameters fixed. Figure 4(c)–Figure 4(e) show that increases with but decreases with and , with a particularly strong dependence on the sixfold anisotropy. The Dzyaloshinskii–Moriya contribution is incorporated into following Ref. [29]. These parameter dependences reflect both the relaxation of the surrounding domains and changes in the internal structure of the composite wall. Although the dependence is weaker than that of , its effect on cannot be accounted for solely by the small change in the uniform-domain relaxation, suggesting that changes in the widths and overlap of the constituent walls also contribute. This interpretation is consistent with the previously reported reduction in the total width of the 180° wall with increasing $K_2 {citep}[29]`.
The relaxation channels identified above set the time scale over which a wall settles into a well-defined position after a current pulse. Defining the settling time as the time required to complete 95% of , the 60° wall reaches within 5% of its final post-pulse position in approximately 100 ps. For the representative 180° wall at A m, the fitted amplitudes and relaxation times in Eq. (11) give a settling time of approximately 550 ps. The internal degrees of freedom of the composite wall therefore increase the post-pulse settling time by a factor of about five, providing an intrinsic time scale relevant to pulse-controlled positioning and subsequent position readout. The strain-induced twofold anisotropy provides an experimentally accessible means of tuning the post-pulse displacement.
Conclusion
We have investigated the current-driven transient dynamics of magnetic-octupole domain walls in MnSn using a multipole micromagnetic framework. For a 60° wall, the post-pulse motion is governed by the relaxation of the current-induced rotation of the surrounding domains, with a characteristic time quantitatively reproduced by a uniform-domain analytic model. For a composite 180° wall, the simulations reveal an additional slow relaxation associated with the relative separations among its constituent walls, which substantially extends the time required for the wall to reach its final post-pulse position. The post-pulse response also varies systematically with the exchange stiffness and magnetic anisotropies, with the strain-induced twofold anisotropy providing an experimentally accessible means of tuning the post-pulse displacement. These results identify distinct domain and internal-coordinate relaxation channels and establish the intrinsic time scales governing pulse-controlled positioning and subsequent readout of magnetic-octupole domain walls in antiferromagnetic spintronic devices.
Acknowledgements
This work was supported by the National Science Foundation (NSF) through the Center for Advanced Semiconductor Chips with Accelerated Performance (ASAP) Industry-University Cooperative Research Center under NSF Cooperative Agreement No. EEC-2231625.
Data availability
The data that support the findings of this study are available from the corresponding author upon reasonable request.
References
References
- [1]D. A. Allwood, G. Xiong, C. C. Faulkner, D. Atkinson, D. Petit, and R. P. Cowburn, Magnetic Domain-Wall Logic, Science 309, 1688 (2005).
- [2]S. S. P. Parkin, M. Hayashi, and L. Thomas, Magnetic Domain-Wall Racetrack Memory, Science 320, 190 (2008).DOI
- [3]D. Kumar, T. Jin, R. Sbiaa, M. Kläui, S. Bedanta, S. Fukami, D. Ravelosona, S.-H. Yang, X. Liu, and S. N. Piramanayagam, Domain wall memory: Physics, materials, and devices, Physics Reports 958, 1 (2022).DOI
- [4]C. H. Marrows, J. Barker, T. A. Moore, and T. Moorsom, Neuromorphic computing with spintronics, npj Spintronics 2, 12 (2024).DOI
- [5]G. Venkat, D. A. Allwood, and T. J. Hayward, Magnetic domain walls: Types, processes and applications, Journal of Physics D: Applied Physics 57, 063001 (2024).arxiv.org/abs/2305.17800
- [6]B. B. Vermeulen, B. Sorée, S. Couet, K. Temst, and V. D. Nguyen, Progress in Spin Logic Devices Based on Domain-Wall Motion, Micromachines 15, 696 (2024).DOI
- [7]T. Jungwirth, X. Marti, P. Wadley, and J. Wunderlich, Antiferromagnetic spintronics, Nature Nanotechnology 11, 231 (2016).
- [8]V. Baltz, A. Manchon, M. Tsoi, T. Moriyama, T. Ono, and Y. Tserkovnyak, Antiferromagnetic spintronics, Reviews of Modern Physics 90, 015005 (2018).DOI
- [9]A. Dal Din, O. J. Amin, P. Wadley, and K. W. Edmonds, Antiferromagnetic spintronics and beyond, npj Spintronics 2, 25 (2024).DOI
- [10]S. A. Siddiqui, J. Sklenar, K. Kang, M. J. Gilbert, A. Schleife, N. Mason, and A. Hoffmann, Metallic antiferromagnets, Journal of Applied Physics 128, 040904 (2020).DOI
- [11]M.-T. Suzuki, T. Koretsune, M. Ochi, and R. Arita, Cluster multipole theory for anomalous Hall effect in antiferromagnets, Physical Review B 95, 094406 (2017).DOI
- [12]S. Nakatsuji, N. Kiyohara, and T. Higo, Large anomalous Hall effect in a non-collinear antiferromagnet at room temperature, Nature 527, 212 (2015).
- [13]T. Higo, H. Man, D. B. Gopman, L. Wu, T. Koretsune, O. M. J. van ’t Erve, Y. P. Kabanov, D. Rees, Y. Li, M.-T. Suzuki, S. Patankar, M. Ikhlas, C. L. Chien, R. Arita, R. D. Shull, J. Orenstein, and S. Nakatsuji, Large magneto-optical Kerr effect and imaging of magnetic octupole domains in an antiferromagnetic metal, Nature Photonics 12, 73 (2018).DOI
- [14]T. Chen, T. Tomita, S. Minami, M. Fu, T. Koretsune, M. Kitani, I. Muhammad, D. Nishio-Hamane, R. Ishii, F. Ishii, R. Arita, and S. Nakatsuji, Anomalous transport due to Weyl fermions in the chiral antiferromagnets Mn₃X, X = Sn, Ge, Nature Communications 12, 572 (2021).
- [15]S. Shim, M. Mehrhaeen, J. Sklenar, S.-L. Zhang, A. Hoffmann, and N. Mason, Spin-Polarized Antiferromagnetic Metals, Annual Review of Condensed Matter Physics 16, 103 (2025).
- [16]H. Reichlova, T. Janda, J. Godinho, A. Markou, D. Kriegner, R. Schlitz, J. Zelezny, Z. Soban, M. Bejarano, H. Schultheiss, P. Nemec, T. Jungwirth, C. Felser, J. Wunderlich, and S. T. B. Goennenwein, Imaging and writing magnetic domains in the non-collinear antiferromagnet Mn₃Sn, Nature Communications 10, 5459 (2019).DOI
- [17]S. Sugimoto, Y. Nakatani, Y. Yamane, M. Ikhlas, K. Kondou, M. Kimata, T. Tomita, S. Nakatsuji, and Y. Otani, Electrical nucleation, displacement, and detection of antiferromagnetic domain walls in the chiral antiferromagnet Mn₃Sn, Communications Physics 3, 111 (2020).DOI
- [18]M. Wu, T. Chen, T. Nomoto, Y. Tserkovnyak, H. Isshiki, Y. Nakatani, T. Higo, T. Tomita, K. Kondou, R. Arita, S. Nakatsuji, and Y. Otani, Current-driven fast magnetic octupole domain-wall motion in noncollinear antiferromagnets, Nature Communications 15, 4305 (2024).DOI
- [19]M.-W. Yoo, V. O. Lorenz, A. Hoffmann, and D. G. Cahill, Thermal contribution to current-driven antiferromagnetic-order switching, APL Materials 12, 081107 (2024).
- [20]Z. Xu, Y. Zhou, X. Zhang, Y. Qiao, Z. Xu, D. Shao, and Z. Zhu, Spin-orbit torque-driven chiral domain wall motion in Mn₃Sn, Applied Physics Letters 127, 02402 (2025).arxiv.org/abs/2409.18554
- [21]Y. Yamane, O. Gomonay, and J. Sinova, Dynamics of non-collinear antiferromagnetic textures driven by spin current injection, Physical Review B 100, 054415 (2019).
- [22]O. Gomonay, T. Jungwirth, and J. Sinova, High antiferromagnetic domain wall velocity induced by Néel spin-orbit torques, Physical Review Letters 117, 017202 (2016).DOI
- [23]W. Döring, Über die Trägheit der Wände zwischen Weißschen Bezirken, Zeitschrift für Naturforschung A 3, 373 (1948).DOI
- [24]E. Saitoh, H. Miyajima, T. Yamaoka, and G. Tatara, Current-induced resonance and mass determination of a single magnetic domain wall, Nature 432, 203 (2004).pubmed.ncbi.nlm.nih.gov/15538364
- [25]L. Thomas, R. Moriya, C. Rettner, and S. S. Parkin, Dynamics of Magnetic Domain Walls Under Their Own Inertia, Science 330, 1810 (2010).DOI
- [26]J. Torrejon, E. Martinez, and M. Hayashi, Tunable inertia of chiral magnetic domain walls, Nature Communications 7, 13533 (2016).DOI
- [27]M.-W. Yoo, F. Mineo, and J.-V. Kim, Analytical model of the deformation-induced inertial dynamics of a magnetic vortex, Journal of Applied Physics 129, 053903 (2021).DOI
- [28]A. V. Kimel, B. A. Ivanov, R. V. Pisarev, P. A. Usachev, A. Kirilyuk, and T. Rasing, Inertia-driven spin switching in antiferromagnets, Nature Physics 5, 727 (2009).DOI
- [29]M.-W. Yoo, R. Winkler, and A. Hoffmann, Micromagnetic simulations for magnetic multipoles, Applied Physics Reviews 13, 021423 (2026).
- [30]A. Shukla, S. Qian, and S. Rakheja, Order parameter dynamics in Mn₃Sn driven by DC and pulsed spin–orbit torques, APL Materials 11, 091110 (2023).DOI
- [31]S. T. Konakanchi, S. Banerjee, M. M. Rahman, Y. Yamane, S. Kanai, S. Fukami, and P. Upadhyaya, Electrically tunable picosecond-scale octupole fluctuations in chiral antiferromagnets, Physical Review Letters 135, 136704 (2025).DOI
- [32]T. Higo, K. Kondou, T. Nomoto, M. Shiga, S. Sakamoto, X. Chen, D. Nishio-Hamane, R. Arita, Y. Otani, S. Miwa, and S. Nakatsuji, Perpendicular full switching of chiral antiferromagnetic order by current, Nature 607, 474 (2022).DOI
- [33]M. Ikhlas, S. Dasgupta, F. Theuss, T. Higo, S. Kittaka, B. J. Ramshaw, O. Tchernyshyov, C. W. Hicks, and S. Nakatsuji, Piezomagnetic switching of the anomalous Hall effect in an antiferromagnet at room temperature, Nature Physics 18, 1086 (2022).DOI
- [34]J.-Y. Yoon, P. Zhang, C.-T. Chou, Y. Takeuchi, T. Uchimura, J. T. Hou, J. Han, S. Kanai, H. Ohno, S. Fukami, and L. Liu, Handedness anomaly in a non-collinear antiferromagnet under spin–orbit torque, Nature Materials 22, 1106 (2023).DOI
- [35]Z. He and L. Liu, Magnetic dynamics of strained non-collinear antiferromagnet, Journal of Applied Physics 135, 093902 (2024).
- [36]A. Shukla, S. Qian, and S. Rakheja, Impact of strain on the SOT-driven dynamics of thin film Mn₃Sn, Journal of Applied Physics 135, 123903 (2024).



