betaFeedback

WorksPhysics and Astronomy

Surface potential-driven surface states in 3D topological photonic crystals

Abstract

Surface potential in a topological matter could unprecedentedly localize the waves. However, this surface potential is yet to be exploited in topological photonic systems. Here, we demonstrate that photonic surface states can be induced and controlled by the surface potential in a dielectric double gyroid (DG) photonic crystal. The basis translation in a unit cell enables tuning of the surface potential, which in turn regulates the degree of wave localization. The gradual modulation of DG photonic crystals enables the generation of a pseudomagnetic field. Overall, this study shows the interplay between surface potential and pseudomagnetic field regarding the surface states. The physical consequences outlined herein not only widen the scope of surface states in 3D photonic crystals but also highlight the importance of surface treatments in a photonic system.

regarding the surface states. The physical consequences outlined herein not only widen the scope of surface states in 3D photonic crystals but also highlight the importance of surface treatments in a photonic system.

Main text:

The discovery of topological insulators opened exciting new realms of physics[1, 2], and extensive efforts have been made to understand topological physics over the last decade. At this field's core, it is important to note zero-dimensional degeneracies such as Dirac[3, 4, 5, 6, 7, 8, 9] or Weyl points[10, 11] [12, 13, 14, 15, 16, 17, 18, 19] and one-dimensional degeneracies such as nodal lines20-28. These band degeneracies have been theoretically or experimentally realized using metals21,29, semimetals30-36, phononic crystals37-39, electrical circuits40, and photonic crystals[10, 11] [18, 41, 42, 43, 44, 45, 46, 47, 48, 49]. Based on the definition of topological insulators, many studies propose several boundary states, such as one-way surface/edge states39,50,51, drumhead surface states40,52-55, and Fermi arcs47,48,56-59.

Beyond them, one can adjust the boundary state with surface/edge potential60-67 and pseudomagnetic field13,37,68. In condensed matters, the surface/edge potential60-64 arises from the passivation on the surface/edge of a given material65-67. The surface/edge potential60-63 has been successfully implemented in two-dimensional (2D) materials including graphene65, boron nitride66, and semimetals;60,64,67 consequently, the excitation and manipulation of surface/edge states came to the fore. However, such driving and using surface potential are yet to be exploited in topological photonic crystals.

Meanwhile, the pseudomagnetic field is a virtual effective field stemming from a spatial reconfiguration of the crystal lattice without a real magnetic field69-72. Like a real magnetic field enabling the quantum Hall effect73,74, the pseudomagnetic field was found to be a gold vista for topologically nontrivial surface/edge states in semimetals75-79, photonic crystals80-82 and phononic crystals37,70,71,83. Nevertheless, the surface state’s profiles along the zeroth Landau level on a 3D Weyl photonic crystal, driven by the pseudomagnetic field, were out of reach.

Here, we demonstrate photonic surface waves that arise from the interplay between surface potential and pseudomagnetic field in photonic systems. First, we investigate the effect of the surface potential in a system governed by the Weyl equation with a pseudomagnetic field. The pseudomagnetic field is switched on by the Weyl points that vary with the unit cell positions along the boundary-boundary direction in the system. Then, we apply the effective Hamiltonian description to a photonic system based on double gyroid (DG) photonic crystals17. The DG photonic crystals are found to exhibit Weyl points due to the geometrical perturbation, which appears as a defect-like shape. To realize a pseudomagnetic field, we constitute a photonic array of the DG unit cells with a spatial gradient of the perturbation, i.e., the degree of the defect varies with the position. We then compute quantized Landau levels and eigenstates along the zeroth Landau level to quantitate the asymmetric localization of photonic waves on the surfaces. This observed asymmetry in wave localization evidences the existence of the surface potential. Then, we tune the translation of the basis of the unit cell to tame the surface termination. This tuning exquisitely controls the surface potential so that the degree of wave localization varies with respect to the tuning. Finally, we implement such results to the evasion behaviors of a photonic wave to observe the interplay between the surface potential and pseudomagnetic field.

The attraction of waves by the surface potential in the Weyl system

First, let us describe the pseudomagnetic field’s effects using the Weyl Hamiltonian. For this, we consider a system periodic along the x1x_{1}- and x2x_{2}-directions for an orthogonal coordinate system. The system consists of NN unit cells along the x3x_{3}-direction (the horizontal rightward direction in Figure 1a-Figure 1b), and surface boundaries are parallel to the x1x_{1}- and x2x_{2}-directions. We assume that this system is governed by that describes a Weyl point at kw\mathbf{k}_w, where σ0\sigma_0 is the 2×22 \times2 identity matrix, and σi\sigma_i (i=1,2,3i = 1, 2, 3) are the Pauli matrices. We decompose the Weyl point’s location kw\mathbf{k}_w into kw=kw,0+Awn\mathbf{k}_w = \mathbf{k}_{w,0} + \mathbf{A}_w^n.

Effects of surface potential on the wave localization by pseudomagnetic fields

Figure 1. Effects of surface potential on the wave localization by pseudomagnetic fields. a, b, Schematic illustrations of two systems with opposite psp_s. The systems are finite along x3x_3-direction (the horizontal direction) and periodic along x1x_1- and x2x_2-direction. In each panel, the varying pp is schematically represented as the size of yellow circles. Both systems are described by equation (1). c, Comparisons of their eigenstates’ distributions along x3x_3-direction, exhibiting the mutual symmetric dispersions. d, Schematic plot of VsV_s, the scalar coefficient of the surface potential. e, Comparisons of the eigenstates’ distributions of a and b when VsV_s is applied. In c and e, gray dotted lines are the symmetric curves with respect to the center for comparisons of the red and blue plots.

kw,0\mathbf{k}_{w,0} is a constant while Awn\mathbf{A}_w^n depends on the unit cell’s index nn. We assume that Awn\mathbf{A}_w^n linearly varies with a specific value pp (henceforth, this value is referred to as perturbation strength) which also linearly varies with nn:

Awn∝p(n)=psn+const,(1)\mathbf{A}_w^n \propto p(n) = p_s n + const, \tag*{(1)}

where psp_s is a proportional constant (refer to Figure 1a-Figure 1b). Then, the pseudomagnetic field can be written as B=∇×Awn\mathbf{B} = \nabla\times\mathbf{A}_w^n, which is proportional to psp_s.

Let us suppose two systems with different signs of slopes, i.e., one system described by ps=−ps,0p_s = -p_{s,0} (Figure 1a) and the other described by ps=+ps,0p_s = +p_{s,0} (Figure 1b) where ps,0p_{s,0} is positive. Their p(n)p(n) are schematically illustrated as the size of yellow circles in Figure 1a-Figure 1b. The pseudomagnetic fields B\mathbf{B} for these two are in the same magnitudes and in opposite directions. Their wave localization of the zeroth Landau level at a specific point in the momentum space shows mutually symmetric characteristics for these opposite fields, as shown in Figure 1c.

Now, let us implement a surface potential VV as follows:

V=Vsσ3,(2)V = V_s \sigma_3, \tag*{(2)}

where VsV_s is nonzero only around the boundaries60,61,64-66, like Figure 1d. When we include the surface potential term with VsV_s, further detailed in Methods, eq. (1) is rewritten as:

{σ⋅(−i∇−kw)+V}ψ=iσ0∂ψ∂t.(3)\left\{ \boldsymbol{\sigma} \cdot\left(-i\nabla- \mathbf{k}_w\right) + V \right\}\psi= i\sigma_0 \frac{\partial\psi}{\partial t}. \tag*{(3)}

By applying the same VV for the two systems in Figure 1a-Figure 1b, we can observe mutually asymmetric localization, as shown in Figure 1e. The two localized states commonly show a slight shift in the left direction, implying that the surface potential attracts them along that direction.

Applying surface potential in a finite-sized array

Although there can be several methods to drive a surface potential into a photonic crystal, we herein adjust the surface terminations in a finite-sized array. In a fully periodic crystal, the fields or eigenvectors of a propagating mode are invariant under discrete translation, not depending on a specific position of the basis in a unit cell. On the contrary, a finite-sized array has terminations at the boundaries. A propagating wave profile depends on the terminations according to the variations of the basis’s positions in the unit cells84, as shown in Figure 2a. Thus, the effect of surface potential can be quantitated with respect to adjusting the surface terminations.

Schematics on the realization of surface potential

Figure 2. Schematics on the realization of surface potential. a, Inducing different surface potentials by different surface terminations. The surface terminations are adjusted by the basis’s positions in a unit cell. b, Adding pseudomagnetic field on the systems in a. Generating surface localization of a photonic wave is performed by the pseudomagnetic field, and the degree of localization depends on the surface potential.

Here, we remark on the followings: (i) Eqs. (1) to (3) do not consider a detailed geometry in each unit cell. Thus, observation of the relation between the surface termination and surface potential should be phenomenologically carried out using a real array structure. (ii) A photonic band structure for a finite-sized array displays projected bands, called folding of bands. Without the pseudomagnetic field, the zeroth Landau level adheres to the bulk bands so that surface states cannot be obtained. Thus, we should use the pseudomagnetic field, as shown in Figure 2b. Our study shows the interplay between the surface potential and pseudomagnetic field; the pseudomagnetic field gives the surface localization of a photonic wave, and the surface potential tunes the degree of the localization.

To build the array in Figure 2b and to induce both the surface potential and pseudomagnetic field, we use a DG photonic crystal that exhibits Weyl points17. We adjust the surface terminations by tuning the translation of the basis along the normal direction to the boundaries.

Double gyroid photonic array exhibiting pseudomagnetic field

To drive the surface potential by the surface termination, we use a photonic array that exhibits a pseudomagnetic field by kw=kw,0+Awn\mathbf{k}_{w}=\mathbf{k}_{w,0}+\mathbf{A}_{w}^{n} in eq. (3). We consider the DG, as shown in Figure 3a. The yellow and blue single gyroids (SGs) are given by a set of x=[x1,x2,x3]\mathbf{x}=[x_{1},x_{2},x_{3}] such that fSG,Y(x)+pfp(x)>fD2>0f_{SG,Y}(\mathbf{x})+p f_{p}(\mathbf{x})>f_{D_{2}}>0 and fSG,B(−x)>fO>0f_{SG,B}(-\mathbf{x})>f_{O}>0, respectively, where fD2f_{D_{2}} and fOf_{O} are the level-set values that determine the volume fraction of each SG. The yellow SG has selectively the perturbation term pfp(x)p f_{p}(\mathbf{x}) to break the inversion symmetry and to generate Weyl points in momentum space. Due to this perturbation, the yellow SG exhibits a defect-like narrow region on the arm passing the a1a2\mathbf{a}_{1}\mathbf{a}_{2} surface, as shown in Figure 3a. The higher perturbation strength pp induces the deeper defect-like shape; this corresponds to the yellow circle’s size in Figure 1a-Figure 1b and Figure 2. (See Methods for the detailed explanations about the DG crystal.) When this DG photonic crystal is periodic along all three lattice vector directions, it can exhibit four Weyl points, as shown in Figure 3b-Figure 3c. The Weyl points H0\mathrm{H}_{0} and N0\mathrm{N}_{0} (marked with blue and red solid points in Figure 3c, respectively) have positive and negative topological charges, respectively.

Design of 3D photonic crystal for pseudomagnetic field with panels a–e

Figure 3. Design of 3D photonic crystal for pseudomagnetic field. a, A DG photonic crystal. The SGs are defined by x\mathbf{x} that satisfies the inequalities denoted in the figure. The yellow SG’s inequality has an additional term pfp(x)p f_p(\mathbf{x}) to impose a defect-like shape on this structure (see the bottom-right arm). b, Resulting photonic band structure exhibiting four Weyl points, the band degeneracies. c, Weyl points marked in the three-dimensional first Brillouin zone. They are on a single plane. d, Movements of Weyl points on the plane with the perturbation strength pp. Weyl points in c are also marked here with red and blue solid points and denoted by N0N_0 and H0H_0, respectively. e, Deviations of the Weyl points’ movements with pp from the positions of N0N_0 and H0H_0, shown in the right and left enlargements in d, respectively.

Varying pp of the DG shifts the positions of the Weyl points, as shown in Figure 3d. We denote the moved positions of the Weyl points N0\mathrm{N}_{0} and H0\mathrm{H}_{0} in momentum space by kwN\mathbf{k}_{w}^{N} and kwH\mathbf{k}_{w}^{H}, respectively. Increasing pp makes the Weyl points shift away from Γ\Gamma-point on the single plane ((001)-plane). For the narrow range of pp around the central value p0p_{0}, the traces of all Weyl points exhibit linear shapes so that we can write their positions as kwH=kw,0H+k^sHδkH\mathbf{k}_{w}^{H}=\mathbf{k}_{w,0}^{H}+\hat{\mathbf{k}}_{s}^{H}\delta k^{H} and kwN=kw,0N+k^sNδkN\mathbf{k}_{w}^{N}=\mathbf{k}_{w,0}^{N}+\hat{\mathbf{k}}_{s}^{N}\delta k^{N} where k^sH\hat{\mathbf{k}}_{s}^{H} and k^sN\hat{\mathbf{k}}_{s}^{N} are overall directions of the traces (see Figure 3d). The deviations of shifted Weyl points, δkN\delta k^{N} and δkH\delta k^{H}, also show linear relations with pp, as shown in Figure 3e.

To generate the pseudomagnetic field, we design a photonic array made of DGs whose pp linearly varies with respect to the position in the array13,70,71,85,86. First, we assume a DG-array that consists of DGs with NN unit cells along the a⊥\mathbf{a}_{\perp}-direction between two boundaries, as shown in Figure 4a. The array is periodic along the a⊥\mathbf{a}_{\perp}- and a∥\mathbf{a}_{\parallel}-directions. Next, we apply the non-uniform geometry on this array using the perturbation strength pp that linearly varies along the a⊥\mathbf{a}_{\perp}:

Design of a photonic array and resulting pseudomagnetic fields

Figure 4. Design of a photonic array and resulting pseudomagnetic fields. a, Schematic geometry which consists of NN cells with spatially linearly varying pp along a⊥\mathbf{a}_{\perp}-direction. This gradient is imposed only on the yellow structure. b, Bulk and surface Brillouin zones. c-d, Direction vectors of the pseudomagnetic field around each Weyl point by the above design, denoted by B^N′,B^H′,B^N′′\hat{\mathbf{B}}^{\mathrm{N}'}, \hat{\mathbf{B}}^{\mathrm{H}'}, \hat{\mathbf{B}}^{\mathrm{N}''}, and B^H′′\hat{\mathbf{B}}^{\mathrm{H}''}, respectively. These are calculated from the traces around N0\mathrm{N}_{0}, H0\mathrm{H}_{0}, −N0-\mathrm{N}_{0}, and −H0-\mathrm{H}_{0} marked in Figure 3d, respectively.

p=ps{x⊥−d0}+p0,(4)p = p_s\{x_{\perp}-d_0\}+p_0, \tag*{(4)}

like the inset linear plot in Figure 4a. Here, x⊥x_{\perp} is a coordinate along the a⊥\mathbf{a}_{\perp}, d0d_0 is a distance between the planes at n=0n=0, and n=N/2n=N/2, and p0p_0 is a central value of p(x)p(\mathbf{x}). From the information in Figure 4a-Figure 4b, the pseudomagnetic field has the form B=∇x×A=ps(B⊥a^⊥+B∥a^∥)\mathbf{B}=\nabla_{\mathbf{x}}\times\mathbf{A}=p_s(B_{\perp}\hat{\mathbf{a}}_{\perp}+B_{\parallel}\hat{\mathbf{a}}_{\parallel}), which are parallel to the array boundaries (see Figure 4c-Figure 4d). As a result, the waves can be localized at the boundaries (see Methods for detailed explanations about the array and pseudomagnetic field calculations).

Surface potential by surface termination and resulting photonic wave localization

Plugging the design in the previous section to the array of N=48N=48 primitive cells allows us to generate Landau spectra. The detailed explanations of the Landau levels related to the pseudomagnetic field are in Section 1, Supplementary Information.

Here, we extract and compare the zeroth Landau levels by two arrays with ps=−2ps,0p_s=-2p_{s,0} and ps=+2ps,0p_s=+2p_{s,0}, as illustrated in Figure 5a. Although the two arrays have different internal geometries due to the different psp_s values, their overall translation status are identical, i.e., they generally use the formulae denoted in Figure 3a. Thus, we consider that their surface terminations are identical. The photonic band structure in Figure 5a shows that the resulting zeroth Landau levels accessible from the two arrays are not equal. Furthermore, the eigenstate intensity distributions for the two cases reveal mutual asymmetric (Figure 5b-Figure 5c). The distributions in Figure 5d-Figure 5e are biased toward the n=48n=48 from the symmetric curve (the gray dotted lines). From the fact that the results in Figure 5d-Figure 5e exhibit the same tendency as with Figure 1e, we can conclude that there exists a surface potential in these arrays.

Photonic wave localization and evidence of surface potential

Figure 5. Photonic wave localization and evidence of surface potential. a, Comparison of Landau levels by the opposite perturbation fields. The left and right cases correspond to ps=−2ps,0p_s=-2p_{s,0} and ps=2ps,0p_s=2p_{s,0}, respectively. b, c, Normalized eigenstates respectively along the blue- and red-colored Landau levels shown in a to see surface states localized on the boundaries. d, e, Comparisons of the wave localization along the vertical lines in b and c. Data with the same symbols are overlapped in the same plot. Gray dotted lines are the symmetric curves with respect to n=24n=24 for comparisons of the red and blue plots.

Now, we replace x\mathbf{x} as x−ha⊥\mathbf{x}-h\mathbf{a}_{\perp} to apply overall translation hh of the DG by h∣a⊥∣h|\mathbf{a}_{\perp}| along the a⊥\mathbf{a}_{\perp}-direction to verify the surface termination’s effect, as illustrated in Figure 6a. Note that the profile of pp does not move (see the upper right plot in Figure 6a). For a specific point on the zeroth Landau levels (marked in Figure 6b), we calculate the field intensity for several hh values, as shown in Figure 6c. The discussions so far are about that the surface potential can adjust the degree of localization of surface states generated by the pseudomagnetic field. The results in Figure 6c indicate that the localization degree can be adjusted by the surface termination. The zeroth Landau level in the photonic band structure also can be moved to another position by changing hh. Due to the relatively small hh, the overall configurations of the zeroth Landau level and the surrounding bulk bands remains almost intact, as shown in Figure 6b.

Adjustment of surface potential by surface termination

Figure 6. Adjustment of surface potential by surface termination. a, Schematic illustration of three surface terminations. Observation of the surface potentials is carried out by adjusting the basis’s positions in each unit cell. The upper left three structures are enlargements of the bottom right arrays. The lower left three figures are respectively the schematics of the upper left structures, and they clearly show the translation of the structures along the a⊥\mathbf{a}_{\perp}-direction. The right upper plot indicates that the perturbation pp versus the position nn is the same for all three cases. b-c, Zeroth Landau levels (b) and eigenstate intensities (c) at the point marked in b for three different surface terminations tuned by translation hh along the a⊥\mathbf{a}_{\perp}-direction when N=48N=48 and ps=2ps,0p_s=2p_{s,0} are used.

Evasion behavior of photonic wave

We embody the evasion behavior of a photonic wave in a DG structure using oppositely graded pp. Adjusting the propagation path of a photonic or phononic wave has been an interest in photonics or wave mechanics. These have been proved using materials with negative-refractive indices16,87-89 or Dirac/Weyl crystals exhibiting one-way propagations of waves[3] [12, 13, 44, 90]. Such proofs are related to invisibility-cloaking. Here, we perform the behavior by pulling a photonic wave that was originally propagating on one boundary toward the opposite boundary.

DG arrays that consist of 8 cells with ps=−2ps,0p_{\mathrm{s}}=-2p_{\mathrm{s},0}, 0, ps,0p_{\mathrm{s},0}, 3ps,03p_{\mathrm{s},0}, and 5ps,05p_{\mathrm{s},0} are prepared, based on the array in Figure 4a, (ps,0>0p_{\mathrm{s},0}>0). (The number of cells is counted based on the BCC primitive cell.) The reason for using a smaller number of cells than in the previous case is to broaden intervals between Landau levels. We classify these arrays into groups with ps=−2ps,0p_{\mathrm{s}}=-2p_{\mathrm{s},0} and the others with ps≥0p_{\mathrm{s}}\geq0. The directions of ∇xp\nabla_{\mathbf{x}}p for these two groups are opposite to each other (see the inset of Figure 7a and Figure 7b). The band structures for ps<0p_s < 0 and ps≥0p_s \ge0 (plotted in Figure 7a and Figure 7b, respectively) exhibit Landau levels along ΓH′\Gamma H^\prime-direction. From these plots, we consider ωa/2πc=0.49\omega a/2\pi c = 0.49 as an optimized frequency for the evasion behavior because this frequency between the bulk bands and all zeroth Landau levels commonly meets this frequency only once. We then constitute a DG array, as shown in Figure 7c, using the 8-cells arrays depicted in the inset of Figure 7a-Figure 7b. Each system consists of 8 and 32 cells along a⊥\mathbf{a}_{\perp}- and a∥\mathbf{a}_{\parallel}-directions, respectively, and it is assumed to be infinitely periodic along a^∥\hat{\mathbf{a}}_{\parallel}-direction. The blocks m=[0,8]m = [0, 8] and m=[24,32]m = [24, 32] use negative-valued psp_s, and the central region between the two sections has positive-valued psp_s.

Evasion behavior of photonic waves using heterogeneous blocks

Figure 7. Evasion behavior of photonic waves using heterogeneous blocks. a, b, Zeroth-Landau levels by the 8-block system with several perturbation fields, where ps,0=7.0711×10−3a−1p_{s,0}=7.0711 \times10^{-3}a^{-1}. The perturbation fields used in a and b are opposite. c, Heterogeneous DG system. The PEC is applied to the pink and green boundaries. In pink and green colored bounded blocks, the perturbation fields’ directions are opposite as marked. The system is periodic only along a^∥\hat{\mathbf{a}}_{\parallel}-direction. d-g, Evasion behavior of photonic waves with several ps>0p_s>0 values of the central blocks with fixing ps<0p_s<0 values of the blocks around both ends. Incident points are marked as the star symbols.

The DG array reveals the evasion behavior of photonic waves. At ωa/2πc=0.49\omega a/2\pi c = 0.49, a photonic wave is localized in the section of ps=−2ps,0p_s = -2p_{s,0} around the boundary at n=0n = 0. We then input an incident photonic wave around the localization region, as marked by the star symbols in Figure 7d-Figure 7g. If the blocks m=[8,24]m = [8, 24] were the same as the other blocks, the localization would continue in the central region. We simulate here the situations that the central region’s psp_s is respectively 00, ps,0p_{s,0}, 3ps,03p_{s,0}, and 5ps,05p_{s,0}. The results show the gradual attraction of the photonic waves onto the boundary at n=8n = 8 with increasing psp_s (see Figure 7d-Figure 7g).

In addition, we observe the attraction of waves towards the n=0n = 0 boundaries. In the blocks m=[0,8]m = [0, 8] and m=[24,32]m = [24, 32], the waves are localized on the boundary. On the contrary, the localized waves in the blocks m=[8,24]m = [8, 24] exhibit biased behaviors. Then, we can conclude that this arises from surface potential and surface termination. If we adjust the surface termination, we may observe the bias towards the opposite direction. All these show the interplay between surface potential and pseudomagnetic field.

Discussion

We have demonstrated the asymmetric localization of photonic waves via an interplay between surface potential and pseudomagnetic field using a DG photonic crystal. The pseudomagnetic field has induced the surface states of the photonic waves and the surface potential adjusted the degree of localization. The pseudomagnetic field was formed by the graded location of Weyl points, and the surface potential was applied using surface termination by tuning unit cells’ basis translation. We have observed the shift of the surface states as a result of the surface potential.

In the case of graphene65, boron nitride66, and semimetals60,64,67, surface potentials can be applied using materials’ surface/edge passivation. Although this study used surface termination by crystal’s basis translation, we believe that there could be several types of photonic passivation, for example, a thin material doping. Then, this study and the follow-up studies will open the various possibility of using topological photonic crystals. Meanwhile, there is no example of the detailed analysis of the surface states along the zeroth Landau level by the Hall effect and pseudomagnetic field in three-dimensional Weyl photonic crystals. Therefore, this study will fill this gap thereby this study will positively affect the other studies on the three-dimensional quantum (spin) Hall effect91-96.

Methods

Eigenstates localization by Weyl Hamiltonian. We apply eq. (1) or (3) to the finite system illustrated in Figure 1a-Figure 1b to observe the wave localization like Figure 1c or e. Instead of deriving the Landau level analytically using ladder operators33,97, we use a traveling wave solution ψ(x,t)=uei(k⋅x−ωt)\psi(\mathbf{x},t)=u e^{i(\mathbf{k}\cdot\mathbf{x}-\omega t)} to consider the finite array. The traveling wave solution can be rewritten as the product of a state unu_n that depends on only nn and an exponent ei(k1x1+k2x2−ωt)e^{i(k_1x_1+k_2x_2-\omega t)} that depends on only other variables: ψ(x,t)=unei(k1x1+k2x2−ωt)\psi(\mathbf{x},t)=u_n e^{i(k_1x_1+k_2x_2-\omega t)}. The surface localization is obtained by substituting this into equation (1) or (3). To consider the surface potential in eq. (2), we used the plot in Figure 8 as VsV_s. Detailed derivations, explanations, and additional results related to Figure 1 are given in Section 2, Supplementary Information.

Plot of the surface potential’s scalar coefficient $V_s$

Figure 8. Plot of the surface potential’s scalar coefficient VsV_s. This is the discretized function from Figure 1d. Plots in Figure 1c and e were obtained using this VsV_s.

Preparations of DG photonic crystal. In the following, we give detailed explanations of the DG photonic crystal and array. In this study, we consider the DG, reported in ref. 17. The body-centered cubic (BCC) primitive cell of this structure is defined by the lattice vectors ai=a/2[1,1,1]−ax^i\mathbf{a}_i=a/2 [1,1,1]-a\hat{\mathbf{x}}_i, where [x^1x^2x^3]=I[\hat{\mathbf{x}}_1\hat{\mathbf{x}}_2\hat{\mathbf{x}}_3]=I. The mathematical formulae of fSG,Y(x)f_{SG,Y}(\mathbf{x}), fp(x)f_p(\mathbf{x}), and fSG,B(x)f_{SG,B}(\mathbf{x}) denoted in Figure 3a are fSG,Y(x)=sin⁡X1cos⁡X2+sin⁡X2cos⁡X3+sin⁡X3cos⁡X1f_{SG,Y}(\mathbf{x})=\sin X_1\cos X_2+\sin X_2\cos X_3+\sin X_3\cos X_1, fp(x)=sin⁡(X1+X2)f_p(\mathbf{x})=\sin(X_1+X_2), and fSG,B(x)=sin⁡X~1cos⁡X~2+sin⁡X~2cos⁡X~3+sin⁡X~3cos⁡X~1f_{SG,B}(\mathbf{x})=\sin\widetilde{X}_1\cos\widetilde{X}_2+\sin\widetilde{X}_2\cos\widetilde{X}_3+\sin\widetilde{X}_3\cos\widetilde{X}_1, respectively. Here, the local coordinates are given by X=[X1,X2,X3]=(2π/a)(x−ass)\mathbf{X} = [X_1,X_2,X_3] = (2\pi/a)(\mathbf{x}-\mathbf{a}_s s) and X~=[X~1,X~2,X~3]=(2π/a)x\widetilde{\mathbf{X}} = [\widetilde{X}_1,\widetilde{X}_2,\widetilde{X}_3] = (2\pi/a)\mathbf{x}, where aa is a lattice constant, s=0.0578s = 0.0578 is the shift coefficient that describes the translation of the yellow SG, and as=a1+a2+2a3\mathbf{a}_s = \mathbf{a}_1 + \mathbf{a}_2 + 2\mathbf{a}_3 is the translation direction. For the inequalities marked in Figure 3a, the level-set values fD2=1.15f_{D_2} = 1.15 and fO=1.1f_O = 1.1 are used that determine the volume fraction of each SG. The refractive indices of the two SGs are commonly 4.0, and the outside region of them is filled with air whose refractive index is 1.0.

The perturbation strength pp plays an important role in our work. If pp becomes zero, the space group of this DG is Ia3‾dIa\overline{3}d (no. 230), and this does not exhibit Weyl points18. A DG with appropriate nonzero-valued pp exhibits four Weyl points in the momentum space between the fourth and fifth bands17. Due to the inversion symmetry of the momentum space, the positions of these four Weyl points are inversion symmetric to Γ\Gamma-point. When p=p0=0.195p = p_0 = 0.195 is used, we can get the four Weyl points, as shown in Figure 3b-Figure 3c. They are on a single (001)(001)-plane passing ΓN=(−b1+b2)/2\Gamma N = (-\mathbf{b}_1 + \mathbf{b}_2)/2 and ΓH=(b1+b2−b3)/2\Gamma H = (\mathbf{b}_1 + \mathbf{b}_2 - \mathbf{b}_3)/2 where the reciprocal primitive vectors bi\mathbf{b}_i are defined by [b1b2b3]T=2π[a1a2a3]−1[\mathbf{b}_1\mathbf{b}_2\mathbf{b}_3]^{\mathrm{T}} = 2\pi[\mathbf{a}_1\mathbf{a}_2\mathbf{a}_3]^{-1}. These Weyl points are also denoted as N0N_0 and H0H_0 in Figure 3d. The Chern numbers of the Weyl points N0N_0 and H0H_0 are −1-1 and +1+1, respectively (see § 12.1, Supplementary Information).

DG photonic array for pseudomagnetic field. First, we assume 48 DGs along the a⊥\mathbf{a}_{\perp}-direction between two parallel perfect electric conductor (PEC) boundaries, where a⊥=a2+0.5(a1+a3)\mathbf{a}_{\perp} = \mathbf{a}_2 + 0.5(\mathbf{a}_1 + \mathbf{a}_3) is normal to the boundaries (see Figure 4a). The array is periodic along a=−\mathbf{a}_{=}- and a∥\mathbf{a}_{\parallel}-directions, where a==−a1+a3\mathbf{a}_{=} = -\mathbf{a}_1 + \mathbf{a}_3 and a∥=a1+a3\mathbf{a}_{\parallel} = \mathbf{a}_1 + \mathbf{a}_3. The boundaries are parallel to a1\mathbf{a}_1 and a3\mathbf{a}_3, while the (001)(001)-plane shown in Figure 4b is parallel to a1\mathbf{a}_1 and a2\mathbf{a}_2 (see Figure S4 in § 13, Supplementary Information). Thus, the boundaries and (001)(001)-plane are neither parallel nor perpendicular. The Weyl points N0\mathbf{N}_0 and H0\mathbf{H}_0 on the (001)(001)-plane is partially conserved by projecting it onto the boundary, as shown in Figure 4b. Then, the perturbation strength is given by the position-dependent form, i.e., p=p(x)p=p(\mathbf{x}). It linearly varies with the distance from the boundary at n=0n=0 along the a⊥\mathbf{a}_{\perp}, i.e., ∇xp∝a⊥\nabla_{\mathbf{x}}p\propto\mathbf{a}_{\perp}, and it equals p0p_0 at the midplane between the boundaries, as schematically illustrated in the inset of Figure 4a. The DGs in the primitive cells in Figure 4a exhibit different shapes. Especially, the yellow parts show a stronger defect-like shape with larger pp.

Berry phase around the equifrequency Weyl point N₀

(a)

Berry phase around the equifrequency Weyl point H₀

(b)

Figure S4. Berry phase around the equifrequency Weyl points N0N_{0} (a) and H0H_{0} (b) shown in Figure 1e in the main text. The Chern numbers of N0N_{0} and H0H_{0} are −1-1 and +1+1, respectively.

To calculate Figure 5 and Figure 6, we use ps=±ps,0p_s=\pm p_{s,0} where ps,0=2.9463×10−4a−1p_{s,0}=2.9463\times10^{-4}a^{-1}. The details not mentioned here are the same as the explanations in § 11, Supplementary Information.

Pseudomagnetic field by DG photonic array. Let us assume that the effective Hamiltonian around a Weyl point is expressed as Heff=∑i,j3vij(ki−kw)σjH_{\mathrm{eff}}=\sum_{i,j}^{3}v_{ij}(k_i-k_{\mathrm{w}})\sigma_j where kw\mathbf{k}_{\mathrm{w}} is the Weyl points locations (kwH\mathbf{k}_{\mathrm{w}}^{\mathrm{H}} or kwN\mathbf{k}_{\mathrm{w}}^{\mathrm{N}}), vijv_{ij} is the velocity tensor, and σj\sigma_j are the Pauli matrices 13,15.

kw\mathbf{k}_{\mathrm{w}} can be decomposed into kw=kw,0+k^sδk=kw,0+A\mathbf{k}_{\mathrm{w}}=\mathbf{k}_{\mathrm{w},0}+\hat{\mathbf{k}}_s\delta k=\mathbf{k}_{\mathrm{w},0}+\mathbf{A} where the superscripts N or H of all terms are omitted. Only the last term A\mathbf{A} relies on the real space coordinate-dependent pp, i.e., A=A(p(x))\mathbf{A}=\mathbf{A}(p(\mathbf{x})). From the information in Figure 4a-Figure 4b, the resulting pseudomagnetic field is, therefore, written as

B=∇x×A=ps(B⊥a^⊥+B∥a^∥)(5)\mathbf{B}=\nabla_{\mathbf{x}}\times\mathbf{A}=p_s(B_{\perp}\hat{\mathbf{a}}_{\perp}+B_{\parallel}\hat{\mathbf{a}}_{\parallel}) \tag*{(5)}

where a^⊥\hat{\mathbf{a}}_{\perp} and a^∥\hat{\mathbf{a}}_{\parallel} are the unit vectors of a⊥\mathbf{a}_{\perp} and a∥\mathbf{a}_{\parallel}, respectively, placed on the boundary (see Figure 4a). The components B⊥B_{\perp} and B∥B_{\parallel} are determined by the trajectories in Figure 3d-Figure 3e. Meanwhile, the proportional constant psp_s is the gradient of geometrical non-uniformity and is defined by the ratio of the pp change to the distance between these two boundaries (see the inset in Figure 4a). (Detailed derivations and explanations of this result are given in § 13, Supplementary Information.) Because the length between the two boundaries can be written with the lattice constant aa, the proportional constant psp_s can be expressed in terms of a−1a^{-1}. The pseudomagnetic field B\mathbf{B} in equation (5) has the linear combination form of a^⊥\hat{\mathbf{a}}_{\perp} and a^∥\hat{\mathbf{a}}_{\parallel}, parallel to the boundaries, so the field is parallel to the boundaries, as marked in Figure 4c-Figure 4d. In other words, the common perpendicular direction of a^⊥\hat{\mathbf{a}}_{\perp} and a^∥\hat{\mathbf{a}}_{\parallel} coincides with the surface normal to the boundaries. As a result, we can quantitate the overall Hall effect driven by the pseudomagnetic field B\mathbf{B} and the resultant wave localization around boundaries.

Evasion of the photonic wave. Like the other photonic band structure calculations in this study, Figure 7a-Figure 7b is calculated using the array that consists of DG primitive cells, as illustrated in Figure 9. The perturbation strength slope is counted by ps,0=7.0711×10−3a−1p_{s,0} = 7.0711 \times10^{-3}a^{-1}, e.g., ps=3ps,0p_s = 3p_{s,0}. Figure 7d-Figure 7g are calculated using the array that consists of big cells whose lattice vectors are 2a⊥2\mathbf{a}_{\perp}, a=\mathbf{a}_{=}, and a∥\mathbf{a}_{\parallel}, where a⊥=(a/2)[1,0,1]\mathbf{a}_{\perp} = (a/2)[1,0,1], a==−a1+a3=a[1,0,−1]\mathbf{a}_{=} = -\mathbf{a}_1 + \mathbf{a}_3 = a[1,0,-1], and a∥=a1+a3=a[0,1,0]\mathbf{a}_{\parallel} = \mathbf{a}_1 + \mathbf{a}_3 = a[0,1,0], respectively. We regard that the one big cell coincides with two DG primitive cells because of the projection of a2\mathbf{a}_2 and a3\mathbf{a}_3 onto the plane of a^⊥−a^=\hat{\mathbf{a}}_{\perp}-\hat{\mathbf{a}}_{=} is half of 2a⊥2\mathbf{a}_{\perp} and a=\mathbf{a}_{=}, respectively. Thus, the array marked with m=32m = 32 and n=8n = 8 in Figure 7c consists of 16 and 4 big cells along a^∥\hat{\mathbf{a}}_{\parallel} and a^⊥\hat{\mathbf{a}}_{\perp}-directions, respectively. Along with a∥\mathbf{a}_{\parallel}, only one cell layer was used with periodic boundary conditions. To get Figure 7d-Figure 7g, the ‘Frequency Domain’ solver was used with an input frequency of 0.49(2πc/ωa)0.49(2\pi c/\omega a), marked in Figure 7a and Figure 7b in the main text.

DG primitive cells array

Figure 9. DG primitive cells array that was input to get Figure 7a and Figure 7b in the main text. The array consists of 8 primitive cells with spatially linearly decreasing or increasing pp along a^⊥\hat{\mathbf{a}}_{\perp}-direction.

Simulation details. All photonic structure simulations were performed using COMSOL Multiphysics{sup}®`. To input periodicity, the Floquet periodic boundary condition was imposed on all periodic boundaries. All band structures were obtained using the ‘Eigenfrequency’ solver.

Data availability

The datasets generated during this study are available from the corresponding author on reasonable request.

Code availability

The custom codes used in this study are available from the corresponding author on reasonable request.

Acknowledgement

This work was supported by Samsung Research Funding & Incubation Center for Future Technology of Samsung Electronics (Project Number SRFC-MA1801-04). We also acknowledge the support of the European Regional Development Fund (ERDF) via the Welsh Government (80762-CU145 (East)). H.P. acknowledges the research professor fellowship, supported from by a Korea University grant.

Author contributions

H.P. and S.L. conceived this topic. H.P. discovered the change of Weyl points’ positions with pp. H.P. also predicted and simulated the existence of pseudomagnetic fields, asymmetric localization, and the evasion behavior of the photonic wave. H.P. and S.S.O. simulated the surface potential with the Weyl equation. S.S.O. reviewed all theoretical formulations and simulations. S.L. supervised all the work. All authors contributed to a discussion of the data and the manuscript.

Competing interests

The authors declare that they have no competing interests.

Additional information

Correspondence and requests for materials should be addressed to S.S.O. and S.L.

Supplementary Information for “Surface potential-driven surface states in 3D topological photonic crystals”

Haedong Park; Sang Soon Oh; Seungwoo Lee

*Email: [email protected], [email protected]

Photonic Landau levels and photonic wave localization

Applying the design in Figure 4a in the main text to the array of 48 primitive cells generates Landau levels and Landau plateau near ω0\omega_0 (Figure S1). The perturbation strength pp linearly increases from n=0n = 0 to n=48n = 48. We display all these Landau spectrums along with the ΓN′\Gamma N^\prime- (Figure S1-Figure S1) and ΓH′\Gamma H^\prime-directions (Figure S1-Figure S1) (ΓN′\Gamma N^\prime and ΓH′\Gamma H^\prime are marked in the inset in Figure S1). The width of the Landau plateau is a scale of the magnetic lengths, lN−1∼BNl_N^{-1}\sim\sqrt{B^N} and lH−1∼BHl_H^{-1}\sim\sqrt{B^H}, and marked in Figure S1 and d, respectively. We show the results only on positive ΓN′\Gamma N^\prime- and ΓH′\Gamma H^\prime-directions because all eigenfrequencies and eigenstates are even at the Γ\Gamma-point, due to time-reversal symmetry. We investigate the eigenstates along the zeroth Landau level (red curves in Figure S1 and d) to see surface states localized on the boundary. The process of collecting eigenstates is as follows: first, for a given k\mathbf{k}, we gather the average normal values of magnetic field eigenstates in each unit cell. These values are normalized with the maximum among these. We then collect all these sets for the k\mathbf{k} along the ΓN′\Gamma N^\prime- and ΓH′\Gamma H^\prime-axes, as shown in Figure S1 and e, respectively. Localization aspects vary significantly by the N0N_0 or H0H_0. For ∣k∣<∣ΓN0∣|\mathbf{k}| < |\Gamma N_0| and ∣k∣<∣ΓH0∣|\mathbf{k}| < |\Gamma H_0|, the eigenstates are localized on the lower boundary (which corresponds to the leftmost boundary in Figure 4a in the main text). The confinement length on the lower boundary is a scale of the magnetic length. Around N0N_0 and H0H_0, eigenstates vary dramatically with increasing k\mathbf{k}. For ∣k∣>∣ΓN0∣|\mathbf{k}| > |\Gamma N_0| and ∣k∣>∣ΓH0∣|\mathbf{k}| > |\Gamma H_0|, we observe the eigenstates localized on the upper boundary (which corresponds to the rightmost boundary in Figure 4a in the main text). These results show that N0N_0 and H0H_0, the Weyl points with p=p0p = p_0, are the phase transition points. We carried out the same computations with several values of psp_s. The zeroth Landau level flattens over a larger momentum interval as the pseudomagnetic field increases (Figure S1 and f).

Photonic Landau levels and eigenstates in a pseudomagnetic field

Figure S1. Photonic Landau levels and eigenstates in a pseudomagnetic field by a spatial gradient of pp. a and d, Photonic band structures along ΓN′\Gamma\mathrm{N}^{\prime}- (a) and ΓH′\Gamma\mathrm{H}^{\prime}-directions (d), which exhibit Landau plateaus at around N0\mathrm{N}_{0} and H0\mathrm{H}_{0}, respectively. Here, ps=3ps,0p_{\mathrm{s}}=3p_{\mathrm{s},0} is used where ps,0=2.9463×10−4a−1p_{\mathrm{s},0}=2.9463\times10^{-4}a^{-1}. b and e, Normalized eigenstates along the zeroth Landau levels (red curves in a and d, respectively) to see surface states localized on the boundary. c and f, Zeroth Landau levels according to several magnitudes of pseudomagnetic fields. The ΓN′\Gamma\mathrm{N}^{\prime} and ΓH′\Gamma\mathrm{H}^{\prime}-directions are marked in the inset of d.

Surface states by Weyl equation

Based on equation (3) in the main text, we give detailed derivation of the formula exhibiting surface states. For an orthogonal coordinate system by x1x_1, x2x_2, and x3x_3, we consider a system periodic along with x1x_1- and x2x_2-directions, and finite along x3x_3-direction, as mentioned in the main text. Thus, between the surface boundaries parallel to x1x_1- and x2x_2-directions, there are NN cells along x3x_3-direction. One boundary’s coordinate is considered as [x1,x2,0][x_1,x_2,0], and the other is [x1,x2,Na3][x_1,x_2,Na_3], where a3=∣a3∣a_3 = |\mathbf{a}_3| is the x3x_3-directional lattice constant. A point x=[x1,x2,x3]\mathbf{x} = [x_1,x_2,x_3] in nnth grid from the first boundary is discretized as [x1,x2,na3][x_1,x_2,na_3]. The traveling wave solution ψ(x,t)=ψ0ei(k⋅x−ωt)\psi(\mathbf{x},t) = \psi_0e^{i(\mathbf{k}\cdot\mathbf{x}-\omega t)} can be written as

ψ(x,t)=u(x3)ei(k1x1+k2x2−ωt)=unei(k1x1+k2x2−ωt)(6)\psi(\mathbf{x},t) = u(x_3)e^{i(k_1x_1+k_2x_2-\omega t)} = u_ne^{i(k_1x_1+k_2x_2-\omega t)} \tag*{(6)}

where un=u(x3=na3)u_n = u(x_3 = na_3). Substituting this solution in the equation (3) in the main text gives

{(k1−kw,1)σ1+(k2−kw,2)σ2−kw,3σ3}un−iσ3∂un∂x3+Vsσ3un=ωun(7)\left\{\left(k_1-k_{w,1}\right)\sigma_1+\left(k_2-k_{w,2}\right)\sigma_2-k_{w,3}\sigma_3\right\}u_n-i\sigma_3\frac{\partial u_n}{\partial x_3}+V_s\sigma_3u_n=\omega u_n \tag*{(7)}

where kw=[kw,1,kw,2,kw,3]\mathbf{k}_w = [k_{w,1},k_{w,2},k_{w,3}] is the Weyl point’s location, which can be decomposed as kw=kw,0+Awn\mathbf{k}_w = \mathbf{k}_{w,0}+\mathbf{A}_w^n. Thus, kw\mathbf{k}_w depends on the grid index nn. The scalar coefficient of the surface potential VsV_s also varies with nn. For 1<n<N1<n<N, ∂un/∂x3\partial u_n/\partial x_3 is numerically converted as

∂un∂x3=un+1−un−12a3.(8)\frac{\partial u_n}{\partial x_3}=\frac{u_{n+1}-u_{n-1}}{2a_3}. \tag*{(8)}

Thus, equation (7) becomes

Dun−1+Cnun−Dun+1+Vsσ3un=ωun(9)Du_{n-1}+C_nu_n-Du_{n+1}+V_s\sigma_3u_n=\omega u_n \tag*{(9)}

where

Cn=(k1−kw,1)σ1+(k2−kw,2)σ2−kw,3σ3(10)C_n=\left(k_1-k_{w,1}\right)\sigma_1+\left(k_2-k_{w,2}\right)\sigma_2-k_{w,3}\sigma_3 \tag*{(10)}

and

D=iσ32a3.(11)D=\frac{i\sigma_3}{2a_3}. \tag*{(11)}

Here, CC has a subscript nn due to kw\mathbf{k}_{w} varies with nn. Around the boundaries i.e., n=1n=1 and n=Nn=N, we use following numerical differentials:

∂u1∂x3=−3u1+4u2−u32a3(12)\frac{\partial u_{1}}{\partial x_{3}}=\frac{-3u_{1}+4u_{2}-u_{3}}{2a_{3}} \tag*{(12)}

and

∂uN∂x3=uN−2−4uN−1+3uN2a3.(13)\frac{\partial u_{N}}{\partial x_{3}}=\frac{u_{N-2}-4u_{N-1}+3u_{N}}{2a_{3}}. \tag*{(13)}

By substituting equations (S7) and (S8) into (S2), we have

(C1+3D)u1−4Du2+Du3+Vsσ3u1=ωu1(14)(C_{1}+3D)u_{1}-4Du_{2}+Du_{3}+V_{s}\sigma_{3}u_{1}=\omega u_{1} \tag*{(14)}

and

−DuN−2+4DuN−1+(CN−3D)uN+Vsσ3uN=ωuN,(15)-Du_{N-2}+4Du_{N-1}+(C_{N}-3D)u_{N}+V_{s}\sigma_{3}u_{N}=\omega u_{N}, \tag*{(15)}

respectively. Equations (S4), (S9), and (S10) are summarized as follows:

[C1+3D−4DD0⋯000DC2−D0⋯0000DC3−D⋯000⋮⋮⋮⋮⋱⋮⋮⋮0000⋯DCN−2−D00000⋯0DCN−1−D0000⋯0−D4DCN−3D][u1u2u3⋮uN−2uN−1uN]+[Vsσ300⋯0000Vsσ30⋯0000DVsσ3⋯000⋮⋮⋮⋱⋮⋮⋮000⋯Vsσ300000⋯0Vsσ30000⋯00Vsσ3][u1u2u3⋮uN−2uN−1uN]=ω[u1u2u3⋮uN−2uN−1uN].(16)\begin{aligned} &\left[ \begin{array}{cccccccc} C_{1}+3D & -4D & D & 0 & \cdots& 0 & 0 & 0 \\ D & C_{2} & -D & 0 & \cdots& 0 & 0 & 0 \\ 0 & D & C_{3} & -D & \cdots& 0 & 0 & 0 \\ \vdots& \vdots& \vdots& \vdots& \ddots& \vdots& \vdots& \vdots\\ 0 & 0 & 0 & 0 & \cdots& D & C_{N-2} & -D & 0 \\ 0 & 0 & 0 & 0 & \cdots& 0 & D & C_{N-1} & -D \\ 0 & 0 & 0 & 0 & \cdots& 0 & -D & 4D & C_{N}-3D \end{array} \right] \left[ \begin{array}{c} u_{1}\\ u_{2}\\ u_{3}\\ \vdots\\ u_{N-2}\\ u_{N-1}\\ u_{N} \end{array} \right]\\ &\quad+ \left[ \begin{array}{ccccccc} V_{s}\sigma_{3} & 0 & 0 & \cdots& 0 & 0 & 0 \\ 0 & V_{s}\sigma_{3} & 0 & \cdots& 0 & 0 & 0 \\ 0 & D & V_{s}\sigma_{3} & \cdots& 0 & 0 & 0 \\ \vdots& \vdots& \vdots& \ddots& \vdots& \vdots& \vdots\\ 0 & 0 & 0 & \cdots& V_{s}\sigma_{3} & 0 & 0 \\ 0 & 0 & 0 & \cdots& 0 & V_{s}\sigma_{3} & 0 \\ 0 & 0 & 0 & \cdots& 0 & 0 & V_{s}\sigma_{3} \end{array} \right] \left[ \begin{array}{c} u_{1}\\ u_{2}\\ u_{3}\\ \vdots\\ u_{N-2}\\ u_{N-1}\\ u_{N} \end{array} \right] = \omega \left[ \begin{array}{c} u_{1}\\ u_{2}\\ u_{3}\\ \vdots\\ u_{N-2}\\ u_{N-1}\\ u_{N} \end{array} \right]. \tag*{(16)} \end{aligned}

For a system with N=48N=48, we simply use ai=ax^i\mathbf{a}_{i}=a\hat{\mathbf{x}}_{i} and [b1b2b3]T=2π[a1a2a3]−1[\mathbf{b}_{1}\mathbf{b}_{2}\mathbf{b}_{3}]^{\mathrm{T}}=2\pi[\mathbf{a}_{1}\mathbf{a}_{2}\mathbf{a}_{3}]^{-1}. We set the constant term of the Weyl point’s location kw,0\mathbf{k}_{w,0} as kw,0=0.194b1−0.22b2+0.1171b3\mathbf{k}_{w,0}=0.194\mathbf{b}_{1}-0.22\mathbf{b}_{2}+0.1171\mathbf{b}_{3}. The varying term Awn\mathbf{A}_{w}^{n} is written as Awn=ps{(n−1)a3−d0}ks\mathbf{A}_{w}^{n}=p_{s}\{(n-1)a_{3}-d_{0}\}\mathbf{k}_{s}, where ks=[6.4867,−5.5920,1.4216]a−1\mathbf{k}_{s}=[6.4867,-5.5920,1.4216]a^{-1} is the Weyl point’s shift direction with varying nn, and d0=d_{0}= (N/2−1/2)a3(N/2 - 1/2)a_3 is the distance between the midplane and the n=1n = 1 grid.

We first investigate the surface localization when the surface potential is not considered (i.e., VsV_s is zero for all the grids). When ps=−ps,0p_s = -p_{s,0} and ps=ps,0p_s = p_{s,0} were respectively used (ps,0=8.8388×10−4a−1p_{s,0} = 8.8388 \times10^{-4}a^{-1}), the zeroth Landau levels shown in Figure S2-Figure S2 are identical. We collect the (normalized) eigenstates intensities along with the zeroth Landau levels to observe surface states localized on the boundaries. As shown in Figure S2-Figure S2, the eigenstate amplitudes are mutually symmetric.

Symmetric localization of eigenstates by Weyl equation when pseudomagnetic field is applied

Figure S2. Symmetric localization of eigenstates by Weyl equation when pseudomagnetic field is applied. a, b, Band structures and the zeroth Landau levels calculated by equation (16). Each case corresponds to ps=−ps,0p_{\mathrm{s}}=-p_{\mathrm{s},0} and ps=ps,0p_{\mathrm{s}}=p_{\mathrm{s},0}, respectively, where ps,0=8.8388×10−4a−1p_{\mathrm{s},0}=8.8388 \times10^{-4}a^{-1}. ΓX‾=0.441b1−0.5b2\overline{\Gamma X}=0.441\mathbf{b}_{1}-0.5\mathbf{b}_{2} passes the projected Weyl point’s location. c, d, Normalized eigenstates along the zeroth Landau levels shown in a and b to see surface states localized on the boundaries. e, f, Comparisons of the localized wave intensities along the vertical lines marked in c and d. Data with the same symbols are overlapped in the same plot. Gray dotted lines are the symmetric curves with respect to n=24n=24 for comparisons of the red and blue plots.

On the contrary, when we consider the VsV_s, the mutual symmetric distributions of wave intensities for the two cases are broken. We assume that VsV_s is non-zero only on the first/last one or two grids around the boundaries, as shown in Figure 8 in the main text; Vs(n=1)=−0.1a−1V_s(n = 1) = -0.1a^{-1}, Vs(n=47)=0.05a−1V_s(n = 47) = 0.05a^{-1}, and Vs(n=48)=0.1a−1V_s(n = 48) = 0.1a^{-1}. Although several studies[1, 2, 3, 4, 5] have used the Dirac delta function or a similar function as VsV_s, we impose finite values as we consider the finite and discretized system. The overall shape of Vs=Vs(n)V_s = V_s(n) is similar to Figure 1d in the main text. The resulting surface localization is biased towards a specific boundary, as shown in Figure S3.

Six-panel plot showing asymmetric localization of eigenstates by Weyl equation

Figure S3. Asymmetric localization of eigenstates by Weyl equation when pseudomagnetic field and surface potential are applied. The explanations for Figure S2 can be used again for all the panels. The main point in here is that the wave intensities are biased towards the n=0n = 0 boundary due to the application of the surface potential.

Berry phase of Weyl points at equifrequency

We introduced a double gyroid (DG) photonic crystal in Figure 3 in the main text. The DG exhibits four point-degeneracies marked as N0N_{0} and H0H_{0} in Figure 3d in the main text. To see if these are Weyl points, we calculate the Berry phase using the Wilson Loop method[6, 7, 8, 9, 10]. The Berry phases of the lower and upper bands connected to point N0N_{0} exhibit decreasing and increasing by 2π2\pi, respectively (see Figure S4). Therefore, its Chern number is −1-1. Likewise, the lower and upper bands connected to point H0H_{0} reveals increasing and decreasing by 2π2\pi, respectively (see Figure S4). Therefore, its Chern number is +1+1. All these are nonzero Chern numbers. Thus, these points are Weyl points, and all surface states in this study are topologically nontrivial by the Weyl points.

Derivation of pseudomagnetic field in DG array

Here, we use a1=a/2[−1,1,1]\mathbf{a}_1 = a/2\left[-1,1,1\right], a2=a/2[1,−1,1]\mathbf{a}_2 = a/2\left[1,-1,1\right], and a3=a/2[1,1,−1]\mathbf{a}_3 = a/2\left[1,1,-1\right]. The normal vector of the perfect electric conductor (PEC) boundary at n=0n=0 shown in Figure 4a in the main text is a⊥=a2+0.5(a1+a3)\mathbf{a}_{\perp} = \mathbf{a}_2 + 0.5(\mathbf{a}_1 + \mathbf{a}_3). We assume that this plane passes the origin.

Therefore, the distance between a point x=[x1,x2,x3]\mathbf{x} = [x_1,x_2,x_3] and this plane is d(x)=a^⊥⋅(x−0)d(\mathbf{x}) = \hat{\mathbf{a}}_{\perp}\cdot(\mathbf{x}-\mathbf{0}) or d(x)=(x1+x3)/2d(\mathbf{x}) = (x_1+x_3)/\sqrt{2}. The perturbation strength pp, plotted in the inset of Figure 2c in the main text, is given by

p(x)=ps{d(x)−d0}+p0(17)p(\mathbf{x}) = p_s\{d(\mathbf{x})-d_0\}+p_0 \tag*{(17)}

where psp_s is a proportional constant, and d0d_0 is a distance between the planes at n=0n=0 and n=N/2n=N/2, marked in the inset of Figure 4a in the main text. The constant p0p_0 is a central value of p(x)p(\mathbf{x}) (see the inset of Figure 4a in the main text) or a perturbation strength used for the default photonic crystal to generate Figure 3a-Figure 3c in the main text. If the number of unit cells between these boundaries is NN, and the perturbation strengths at these boundaries has been determined, the proportional constant psp_s is calculated as follows:

ps=p(na⊥)−p(0)d(na⊥)−d(0)(18)p_s = \frac{p(n\mathbf{a}_{\perp})-p(\mathbf{0})}{d(n\mathbf{a}_{\perp})-d(\mathbf{0})} \tag*{(18)}

In other words, this quantity reflects the design of the DG array, such as the number of unit cells and the gradient of the perturbation strength.

As shown in Figure 3d in the main text, Weyl points are confined to (001)(001)-plane, irrespective of pp. The normal direction of this plane coincides with the normal direction of the plane spanned by a1\mathbf{a}_1 and a2\mathbf{a}_2 (see Figure S5). If we transform the coordinate system by

DG primitive cells array

Figure S5. DG primitive cells array that was input to get Figure 4-Figure 6 in the main text. The array consists of NN cells with spatially linearly changing pp along a^⊥\hat{\mathbf{a}}_{\perp}-direction. Several directions significantly dealt with in this study are also marked.

x′=[cos⁡π4−sin⁡π40001−sin⁡π4−cos⁡π40]x(19)\mathbf{x}' = \begin{bmatrix} \cos\frac{\pi}{4} & -\sin\frac{\pi}{4} & 0 \\ 0 & 0 & 1 \\ -\sin\frac{\pi}{4} & -\cos\frac{\pi}{4} & 0 \end{bmatrix} \mathbf{x} \tag*{(19)}

or

x=[cos⁡(−π4)0sin⁡(−π4)sin⁡(−π4)0−cos⁡(−π4)010]x′(20)\mathbf{x} = \begin{bmatrix} \cos\left(-\frac{\pi}{4}\right) & 0 & \sin\left(-\frac{\pi}{4}\right) \\ \sin\left(-\frac{\pi}{4}\right) & 0 & -\cos\left(-\frac{\pi}{4}\right) \\ 0 & 1 & 0 \end{bmatrix}\mathbf{x}' \tag*{(20)}

the directions of ΓN\Gamma_{\mathrm{N}} and ΓH\Gamma_{\mathrm{H}} become equivalent to x^1′=[1,0,0]\hat{\mathbf{x}}'_1 = [1,0,0] and x^2′=[0,1,0]\hat{\mathbf{x}}'_2 = [0,1,0], respectively, so that we can easily write a Hamiltonian for this system. (The relation between the directions of ΓN\Gamma_{\mathrm{N}}, ΓH\Gamma_{\mathrm{H}}, and ai\mathbf{a}_i are marked in Figure S5.) The pp with respect to the new coordinate system is given by

p(x′)=ps{12(x1′−x3′)+x2′2−d0}+p0(21)p(\mathbf{x}') = p_s\left\{\frac{\frac{1}{\sqrt{2}}(x'_1-x'_3)+x'_2}{\sqrt{2}}-d_0\right\}+p_0 \tag*{(21)}

The effective Hamiltonian around a Weyl point is expressed as [9, 11]

Heff=∑i,j3vij(ki−kw)σj(22)H_{eff} = \sum_{i,j}^{3} v_{ij}(k_i-k_w)\sigma_j \tag*{(22)}

where vijv_{ij} is the anisotropic velocity tensor, k\mathbf{k} is the wave vector, and σj\sigma_j is the Pauli matrices. kw\mathbf{k}_w is kwH\mathbf{k}_w^{\mathrm{H}} or kwN\mathbf{k}_w^{\mathrm{N}}. Here, the superscripts N or H of all terms are omitted. If the Weyl points behave like Figure 3d in the main text, kw\mathbf{k}_w can be decomposed into a constant term, kw,0\mathbf{k}_{w,0}, and a varying term, k^sδk=A\hat{\mathbf{k}}_s\delta k=\mathbf{A}, i.e., kw=kw,0+k^sδk=kw,0+A\mathbf{k}_w=\mathbf{k}_{w,0}+\hat{\mathbf{k}}_s\delta k=\mathbf{k}_{w,0}+\mathbf{A}. For the Weyl points marked in Figure 3d in the main text, the vector potential and pseudomagnetic field for the new coordinate system are respectively given by

A′=[ks,1{p(x′)−p0},ks,2{p(x′)−p0},0]=ps2{12(x1′−x3′)+x2′}[ks,1,ks,2,0]+C(23)\begin{aligned} \mathbf{A}' = [k_{s,1}\{p(\mathbf{x}')-p_0\}, k_{s,2}\{p(\mathbf{x}')-p_0\}, 0] \\ &= \frac{p_s}{\sqrt{2}}\left\{\frac{1}{\sqrt{2}}(x'_1-x'_3)+x'_2\right\}[k_{s,1},k_{s,2},0]+C \tag*{(23)} \end{aligned}

and

B′=∇x′×A′=ps2[ks,2,−ks,1,ks,2−2ks,1]=psks,12[1,−2,−1]2−ps2(ks,2−ks,12)[−1,0,−1]2(24)\mathbf{B}' = \nabla_{\mathbf{x}'} \times\mathbf{A}' = \frac{p_s}{2}\left[k_{s,2},-k_{s,1},k_{s,2}-\sqrt{2}k_{s,1}\right] \\ = \frac{p_s k_{s,1}}{\sqrt{2}}\frac{[1,-\sqrt{2},-1]}{2}-\frac{p_s}{\sqrt{2}}\left(k_{s,2}-\frac{k_{s,1}}{\sqrt{2}}\right)\frac{[-1,0,-1]}{\sqrt{2}} \tag*{(24)}

where C=−psd0[ks,1,ks,2,0]C=-p_s d_0[k_{s,1},k_{s,2},0] is a constant term. Proportional constants ks,1k_{s,1} and ks,2k_{s,2} are obtained from the traces in Figure 3d-Figure 3e in the main text. Thus, unlike psp_s in equation (S13), the constants ks,1k_{s,1} and ks,2k_{s,2} do not reflect the design of the array, but they are about the nature of a three-dimensional DG Weyl photonic crystal itself. The pseudomagnetic field with respect to the original coordinate system is written as follows:

B=ps{ks,12[1,0,−1]2−12(ks,2−ks,12)[0,1,0]}=ps(B⊥a^⊥+B∥a^∥)(25)\mathbf{B}=p_s\left\{\frac{k_{s,1}}{\sqrt{2}}\frac{[1,0,-1]}{\sqrt{2}}-\frac{1}{\sqrt{2}}\left(k_{s,2}-\frac{k_{s,1}}{\sqrt{2}}\right)[0,1,0]\right\}=p_s(B_{\perp}\hat{\mathbf{a}}_{\perp}+B_{\parallel}\hat{\mathbf{a}}_{\parallel}) \tag*{(25)}

where B⊥B_{\perp} and B∥B_{\parallel} are respectively

B⊥=ks,12(26)B_{\perp}=\frac{k_{s,1}}{\sqrt{2}} \tag*{(26)}
B∥=−12(ks,2−ks,12)(27)B_{\parallel}=-\frac{1}{\sqrt{2}}\left(k_{s,2}-\frac{k_{s,1}}{\sqrt{2}}\right) \tag*{(27)}

and a^⊥=[1,0,−1]/2\hat{\mathbf{a}}_{\perp}=[1,0,-1]/\sqrt{2} and a^∥=[0,1,0]\hat{\mathbf{a}}_{\parallel}=[0,1,0] are the unit vectors of a⊥=−a1+a3\mathbf{a}_{\perp}=-\mathbf{a}_1+\mathbf{a}_3 and a∥=a1+a3\mathbf{a}_{\parallel}=\mathbf{a}_1+\mathbf{a}_3, respectively, placed on the boundary (see Figure 4a in the main text). The number of cells NN and the difference of p(x)p(\mathbf{x}) at both boundaries are reflected only in psp_s, as mentioned in equation (S13). Therefore, the direction of the pseudomagnetic field B\mathbf{B} is always fixed, regardless of the system scale and the gradient of p(x)p(\mathbf{x}).

The values of each variable in the above derivations are summarized in Table S1. All these values are about the pseudomagnetic fields derived by Weyl points around N0\mathrm{N}_0 and H0\mathrm{H}_0 for N=48N=48. Both pseudomagnetic fields at the antipodes of N0\mathrm{N}_0 and H0\mathrm{H}_0 are −BN-\mathbf{B}^{\mathrm{N}} and −BH-\mathbf{B}^{\mathrm{H}}, respectively, due to the signs of ksN\mathbf{k}_{s}^{\mathrm{N}} and ksH\mathbf{k}_{s}^{\mathrm{H}} are flipped.

Information of pseudomagnetic fields derived by Weyl points around N0N_0 and H0H_0 for 48 cells. All these are calculated by ps=8.8388×10−4a−1p_s = 8.8388 \times10^{-4}a^{-1}. The magnetic length is given by l−1∼Bl^{-1} \sim\sqrt{B}.
ksN=[ks,1N  ks,2N]=[7.9083  −3.5815]a−1\mathbf{k}_{\mathrm{s}}^{N} = [k_{\mathrm{s},1}^{N}\ \ k_{\mathrm{s},2}^{N}] = [7.9083\ \ -3.5815]a^{-1} (in x′\mathbf{x}'-coordinate)
BN=psB⊥Na^⊥+psB∥Na^∥\mathbf{B}^{N} = p_s B_{\perp}^{N}\hat{\mathbf{a}}_{\perp} + p_s B_{\parallel}^{N}\hat{\mathbf{a}}_{\parallel}
=4.9427×10−3a−2a^⊥+5.7334×10−3a−2a^∥= 4.9427 \times10^{-3}a^{-2}\hat{\mathbf{a}}_{\perp} + 5.7334 \times10^{-3}a^{-2}\hat{\mathbf{a}}_{\parallel}
=[3.495  5.7334  −3.495]×10−3a−2= [3.495\ \ 5.7334\ \ -3.495] \times10^{-3}a^{-2}
=[3.9541  6.4866  −3.9541]psa−1= [3.9541\ \ 6.4866\ \ -3.9541]p_sa^{-1} (in x\mathbf{x}-coordinate)
BN=7.5698×10−3a−2=8.5643psa−1B^{N} = 7.5698 \times10^{-3}a^{-2} = 8.5643p_sa^{-1}
lN=11.4936al_N = 11.4936a
lN−1=0.087005a−1l_N^{-1} = 0.087005a^{-1}
ksH=[ks,1H  ks,2H]=[−1.888  9.52]a−1\mathbf{k}_{\mathrm{s}}^{H} = [k_{\mathrm{s},1}^{H}\ \ k_{\mathrm{s},2}^{H}] = [-1.888\ \ 9.52]a^{-1} (in x′\mathbf{x}'-coordinate)
BH=psB⊥Ha^⊥+psB∥Ha^∥\mathbf{B}^{H} = p_s B_{\perp}^{H}\hat{\mathbf{a}}_{\perp} + p_s B_{\parallel}^{H}\hat{\mathbf{a}}_{\parallel}
=−1.18×10−3a−2a^⊥−6.7844×10−3a−2a^∥= -1.18 \times10^{-3}a^{-2}\hat{\mathbf{a}}_{\perp} - 6.7844 \times10^{-3}a^{-2}\hat{\mathbf{a}}_{\parallel}
=[−0.83438  −6.7844  0.83438]×10−3a−2= [-0.83438\ \ -6.7844\ \ 0.83438] \times10^{-3}a^{-2}
=[−0.94399  −7.6756  0.94399]psa−1= [-0.94399\ \ -7.6756\ \ 0.94399]p_sa^{-1} (in x\mathbf{x}-coordinate)
BH=6.8862×10−3a−2=7.7909psa−1B^{H} = 6.8862 \times10^{-3}a^{-2} = 7.7909p_sa^{-1}
lH=12.0506al_H = 12.0506a
lH−1=0.082983a−1l_H^{-1} = 0.082983a^{-1}

Table S1. Information of pseudomagnetic fields derived by Weyl points around N0N_0 and H0H_0 for 48 cells. All these are calculated by ps=8.8388×10−4a−1p_s = 8.8388 \times10^{-4}a^{-1}. The magnetic length is given by l−1∼Bl^{-1} \sim\sqrt{B}.

References

  1. [1]Potter, A. C., Kimchi, I. & Vishwanath, A. Quantum oscillations from surface Fermi arcs in Weyl and Dirac semimetals. Nature Communications 5, 5161 (2014).
  2. [2]Bhowmick, S. & Shenoy, V. B. Weber-Fechner type nonlinear behavior in zigzag edge graphene nanoribbons. Physical Review B 82, 155448 (2010).DOI
  3. [3]Shtanko, O. & Levitov, L. Robustness and universality of surface states in Dirac materials. Proceedings of the National Academy of Sciences 115, 5908-5913 (2018).DOI
  4. [4]Dou, Z. et al. Imaging Bulk and Edge Transport near the Dirac Point in Graphene Moiré Superlattices. Nano Letters 18, 2530-2537 (2018).
  5. [5]Dongre, N. K. & Roychowdhury, K. Effects of surface potentials on Goos-Haenchen and Imbert-Fedorov shifts in Weyl semimetals. arXiv preprint arXiv:2106.04573 (2021).arxiv.org/abs/2106.04573
  6. [6]Park, H. & Lee, S. Double Gyroids for Frequency-Isolated Weyl Points in the Visible Regime and Interference Lithographic Design. ACS Photonics 7, 1577-1585 (2020).DOI
  7. [7]Yu, R., Qi, X. L., Bernevig, A., Fang, Z. & Dai, X. Equivalent expression of Z2 topological invariant for band insulators using the non-Abelian Berry connection. Physical Review B 84, 075119 (2011).DOI
  8. [8]Wang, Q., Xiao, M., Liu, H., Zhu, S. & Chan, C. T. Optical Interface States Protected by Synthetic Weyl Points. Physical Review X 7, 031032 (2017).arxiv.org/abs/1708.05664
  9. [9]Soluyanov, A. A. et al. Type-II Weyl semimetals. Nature 527, 495 (2015).DOI
  10. [10]Yang, Z. et al. Weyl points in a magnetic tetrahedral photonic crystal. Opt. Express 25, 15772-15777 (2017).
  11. [11]Jia, H. et al. Observation of chiral zero mode in inhomogeneous three-dimensional Weyl metamaterials. Science 363, 148-151 (2019).DOI

Paper details

vlnc:W_e555bwf7
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents