WorksPhysics and Astronomy
Proton drip line of deformed hypernuclei
Abstract
The proton drip line of (hyper)nuclei is examined within the framework of the deformed Skyrme-Hartree Fock approach by adjusting the nuclear force parameters to exactly reproduce the core binding energies. The impact of adding a Λ hyperon in a s or p state is studied, and it is found that in some cases the deformation effect facilitates the extension of the drip line by an added p-state hyperon. However, no extension of the drip line is found for s-state hypernuclei.
Introduction
A rigorous test of a global nuclear theory is its ability to predict the number of bound nuclides. The boundaries of the nuclear chart are defined by the so-called drip lines, beyond which no additional neutron or proton can be added to the nucleus. Except for lighter systems, the neutron drip line extends to isotopes far beyond what is experimentally accessible, whereas the proton drip line is much closer to stability, due to the Coulomb-repulsion effects that increase with atomic number .
Proton- and neutron-rich nuclei close to their drip lines have been intensively studied both experimentally [1, 2, 3, 4, 5, 6] and theoretically [7, 8, 9]. In addition, exotic phenomena often occur in those nuclei, and therefore their investigation has the potential to advance the field of exotic nuclear physics. The study of exotic nuclei has thus attracted worldwide attention [10, 11].
In nuclei with added strangeness, strange particles might also affect the drip lines. Previous studies have shown that the weakly-bound nuclear cores of drip line nuclei might be stabilized by the addition of further strongly-bound particles, and the drip line might even be extended by added hyperons [12, 13, 14, 15, 16, 17] or kaons [18].
At present, there is considerable research on the properties of hypernuclei with stable cores, leading to relatively clear understanding of hyperon-nucleon interactions. However, studies on hypernuclei with unstable cores remain limited [19, 20, 21, 22, 23, 24, 25]. Thus, our knowledge of the hypernuclear interactions can be substantially improved by investigating the hypernuclear chart beyond the stability valley. Dalitz and Levi Setti [26] made the first theoretical treatment of some neutron-rich hypernuclei as early as 1963, but the topic received little attention for many years. Majling started a thorough investigation on neutron-rich hypernuclei in the 1990s [27], and recent theoretical calculations demonstrate the possible extension of the neutron drip line in hypernuclei as well as their halo structure [12, 13, 14, 15, 16, 17, 28, 29, 30].
Experimentally, neutron-rich hypernuclei () with unstable cores were indeed seen in early emulsion studies [31]. At KEK, the first productive experiment dedicated to the neutron-rich hypernucleus generated by the process was carried out [32], but statistical error prevented the determination of its binding energy. It was later discovered in other nuclei, including , , , and [33]. Regarding the most extreme case of the hypernucleus, the FINUDA collaboration reported three candidate events from the reaction [34], but the J-PARC E10 experiment [35] failed to obtain a signal for the reaction. In conclusion, there is still a dearth of experimental information about neutron-rich hypernuclei at this time.
Proton-rich hypernuclei have so far attracted even less focus, although it is intriguing that proton-rich isotopes are lighter than neutron-rich ones and closer to the stability valley, and can thus form more easily. In emulsions, the hypernucleus with an unstable core has been seen [31]. There are no current plans or particular experiments aimed at proton-rich hypernuclei, because they cannot be created by the typical , , and reactions. However, a novel avenue for the investigation of hypernuclei is provided by heavy ion collisions. Hypernuclear research was listed as one of the goals of NICA, FAIR, and HIAF [36, 37, 38, 39, 40, 41, 42]. The groundbreaking research in Dubna [43] established the viability of medium-energy heavy ion collisions for the production of hypernuclei, and the HYPHI collaboration [44] verified these findings. In principle, heavy ion experiments can produce hypernuclei of any composition, including proton- and neutron-rich and even multi- hypernuclei [45].
Theoretically, proton-rich hypernuclei have recently been investigated [46, 47]. While the known hypernucleus [31, 48] represents the extension of the Be-core drip line ( is unbound), in those works was claimed as extension of the C-core drip line, but and were excluded from such roles. Furthermore, the beyond-dripline core nuclei , , , and were identified as possible candidates for an extension of the proton drip line by an added . However, definite predictions could not be made, due to the very delicate dependence of the relevant small proton separation energies on both the and interactions.
In this article we strive to improve the accuracy of the theoretical predictions regarding these nuclei. In particular, we adjust the strength of the interaction in order to exactly reproduce the (small negative) proton separation energies of the nuclear cores and then study in detail the addition of a in or states to the proton-rich nucleus. We use the deformed Skyrme-Hartree-Fock (DSHF) model employing an accurate force to compute the (hyper)nuclei [14, 18, 19, 20, 28, 49, 50, 51, 52, 53, 54, 55, 56, 57] and pay close attention to how the system changes when a hyperon is introduced, in particular regarding the effects of core deformation.
The paper is organized as follows. In § 2, we briefly review the DSHF density-functional approach to hypernuclei. In § 3 we present the results regarding possible extension of the core drip line for various hypernuclei. The conclusions are given in Sec. IV.
Formalism
The SHF mean field method is a powerful theoretical density functional method, which can be applied comprehensively from light nuclei to heavy nuclei. In the mean-field theory, the binding energy of the hypernucleus is given by [58, 59, 60, 61, 62, 63, 64, 65]
where the energy-density functional is
with and as contributions from and interactions, respectively. For the nucleonic functional , we use the standard Skyrme forces SLy4 [66] or SkI4 [67]. The one-body density , kinetic density , and spin-orbit (s.o.) current read
where () are the s.p. wave functions of the -th occupied states for the different particles .
The occupation probabilities are calculated by taking into account pairing within a BCS approximation for nucleons only. The pairing interaction between nucleons is taken as a density-dependent force [68],
where pairing strengths are used [49, 69]. A smooth energy cutoff is employed in the BCS calculations and in the case of an odd nucleon number the orbit occupied by the unpaired nucleon is blocked as described in Ref. [70].
Through the variation of the binding energy Eq. (1) one derives the SHF Schrödinger equation for both nucleons and hyperons,
where is the central part of the mean field depending on the densities, while is the s.o. interaction part [59, 71].
| 4 | 26.92 | 0.59 | −1.37 | |
| 5 | 24.91 | −2.01 | −1.42 | |
| 6 | 24.81 | −0.10 | −2.11 | |
| 7 | 58.94 | −1.38 | 2.63 | |
| 8 | 58.57 | −0.36 | −1.74 | |
| 9 | 111.42 | −0.53 | 6.77 | |
| 10 | 97.33 | −0.13 | −1.40 | |
| 11 | 131.82 | −0.32 | 3.60 | |
| 12 | 112.12 | 0.49 | −0.76 | |
| 13 | 132.24 | −2.32 | 0.42 | |
| 14 | 132.97 | 0.74 | −1.58 | |
| 15 | 169.85 | −2.16 | 1.14 | |
| 16 | 169.65 | −0.20 | −2.36 | |
| 17 | 224.17 | −0.48 | 2.76 |
Table 1. Experimental binding energy and single- and double-proton removal energies (in MeV) [77, 78] of several light nuclei just beyond the proton drip line, i.e., at least one of or is negative. Bold values indicate the critical decay.
For the Skyrme-type SLL4 interaction that we will use in this work, is given as [63, 65, 72, 73, 74]
For convenience we repeat here the parameters [74]: (in appropriate units for given in and in ), whereas the small s.o. parameter [20, 75, 76] is neglected in this work. We remind that these optimal force parameters were obtained by fitting the current set of hypernuclear data in combination with the SLy4 force, so the predictions with the SLy4 force may be considered slightly more accurate, although the difference with the SkI4 results is usually very small.
In the present calculations, the DSHF Schrödinger equation is solved in cylindrical coordinates , under the assumption of axial symmetry of the mean fields. The optimal quadrupole deformation parameters
are calculated by minimizing the binding energy . The single-proton separation energy of a normal nucleus is then
with , and similarly for the hypernucleus,
which relates the proton removal energy of the hypernucleus to the one of the core nucleus and the difference of the removal energies of the two cores involved [46]. It is the latter that might stabilize the hypernucleus against proton decay of the otherwise unstable core, because the is stronger bound in the initial nucleus than in the final one, and this also causes a stronger additional binding of the valence proton. Equivalent expressions are valid for the two-proton removal energy.
Here the binding energy like is the energy at the lowest point of the corresponding curve, which implies that the single-particle (s.p.) energies for all occupied proton levels are negative (bound). Vice-versa, however, a bound valence proton s.p. state does not necessarily imply a positive separation energy. Negative corresponds to the experimental situation of a proton emitter in our model, and we focus in particular on the isotopes with a small negative separation energy , which might be turned to positive in the hypernucleus by the above mechanism.
Results
We begin in Table I with a list of the single- and double-proton separation energies of the light-nuclei isotopes just beyond their drip line, i.e., at least one of or is negative. If an added hyperon is able to stabilize a nuclear core sufficiently to render both and positive, that hypernucleus becomes stable. This will only occur if the problematic separation energy is not too large (negative), typically MeV for medium nuclei. According to the table, good candidates are , , , (critical, i.e., more negative, ) and , , , , (critical ). In fact those have also been identified in [46, 47] as possible candidates.
The only experimentally known hypernucleus exhibiting this phenomenon is the lightest one in the table, , with a removal energy MeV [31, 48] and a two-proton removal energy MeV to with MeV, compared to MeV [77] for the core nucleus. Therefore we now investigate the heavier candidates in our theoretical approach, beginning with the most promising case of the core and its critical single-proton decay to .
A problem of the SHF approach with a common Skyrme force is that the experimental binding energies of any nuclei are never exactly reproduced, but in our case accuracies of order 0.1 MeV are required for reliable predictions of the removal energies. For example, the experimental energies are MeV, MeV, and therefore MeV, whereas with the SLy4 force (and spherical calculation) the predictions are MeV, MeV, and MeV. For other nuclei, the differences may be even larger and of different sign, i.e., predicting a wrong drip line nucleus.
We compare in the following two methods to alleviate this problem: (a) As in [46], we compute the quantity , Eq. (11), using the original unmodified Skyrme force. Added to the experimental value of the core, it provides an estimate of for the hypernucleus. (b) We adjust two Skyrme force parameters such that the energies of both core nuclei, e.g., and , (and therefore also ) are reproduced exactly by the DSHF calculation. In practice, we have chosen to adjust the surface parameter and the s.o. parameter of the (SLy4 or SkI4) force, introducing scaling parameters and . The motivation for this choice is that naively the extended proton valence orbits are most sensitive to these parameters of the force, but other choices are in principal possible. The comparison of the SLy4 and SkI4 results will also reveal how reliable this method is.
Another very important issue is the effect of core deformation, and we compare in the following results obtained in deformed and spherical calculations, for both forces and both methods of computing .
The results for are shown in Figure 1 and Table II. The figure shows the potential energy surfaces (PESs) of (solid curves) and (dashed curves) and their hypernuclei, obtained with the original (left panel) and adjusted (right panel) SLy4 force. In this case scaling parameters and are required in order to fit exactly the binding energies of both nuclei. The core nuclei (black curves) are compared with -state hypernuclei (red curves) and -state hypernuclei in the two subsets [101] (blue curves) and [110] (green curves) with oblate and prolate deformation, respectively.
| SLy4 | SkI4 | |||||||
| def. | sph. | def. | sph. | def. | sph. | def. | sph. | |
| 0.965 | 1.000 | 0.814 | 1.000 | |||||
| 0.541 | 1.000 | 0.970 | 1.000 | |||||
| core | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
| 0.16 | 0.00 | -0.08 | 0.00 | 0.15 | 0.00 | 0.14 | 0.00 | |
| 111.42 | 110.97 | 115.43 | 114.64 | 111.42 | 111.07 | 114.29 | 113.94 | |
| -0.53 | -0.99 | 0.48 | -0.31 | -0.53 | -0.87 | -0.17 | -0.52 | |
| [000]1/2 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
| 0.16 | 0.00 | -0.09 | 0.00 | 0.15 | 0.00 | 0.15 | 0.00 | |
| 125.21 | 124.75 | 129.38 | 128.58 | 125.72 | 125.35 | 128.69 | 128.36 | |
| -0.27 | -0.72 | 0.83 | 0.02 | -0.27 | -0.63 | 0.12 | -0.21 | |
| 13.79 | 13.78 | 13.95 | 13.94 | 14.30 | 14.28 | 14.40 | 14.42 | |
| 0.26 | 0.26 | 0.35 | 0.33 | 0.26 | 0.24 | 0.29 | 0.31 | |
| [110]1/2 | -0.03 | 0.00 | -0.02 | 0.00 | -0.01 | 0.00 | -0.01 | 0.00 |
| -0.13 | 0.00 | -0.10 | 0.00 | -0.11 | 0.00 | -0.10 | 0.00 | |
| 114.59 | 113.10 | 118.68 | 117.54 | 114.69 | 112.61 | 117.59 | 115.91 | |
| 0.09 | -1.35 | 1.23 | 0.12 | 0.09 | -1.95 | 0.48 | -1.18 | |
| 3.17 | 2.13 | 3.25 | 2.90 | 3.27 | 1.54 | 3.30 | 1.97 | |
| 0.62 | -0.36 | 0.75 | 0.43 | 0.62 | -1.08 | 0.65 | -0.65 | |
| [101]1/2 | 0.04 | 0.00 | 0.04 | 0.00 | 0.04 | 0.00 | 0.03 | 0.00 |
| [101]3/2 | 0.20 | 0.00 | 0.16 | 0.00 | 0.18 | 0.00 | 0.17 | 0.00 |
| 115.27 | 114.03 | 119.16 | 118.10 | 115.27 | 114.19 | 118.15 | 117.13 | |
| 0.64 | -0.43 | 1.60 | 0.67 | 0.57 | -0.39 | 0.94 | 0.03 | |
| 3.85 | 3.06 | 3.73 | 3.46 | 3.85 | 3.12 | 3.86 | 3.19 | |
| 1.17 | 0.55 | 1.12 | 0.98 | 1.09 | 0.48 | 1.11 | 0.55 |
Table II. Properties of and and their hypernuclei in the DSHF approach (deformed and spherical results) with original () and adjusted SLy4 and SkI4 NN forces: quadrupole deformation , binding energy , single-proton removal energy , removal energy , and their difference , Eq. (11). All energies are in MeV.

Figure 1. The potential energy surfaces of and (black curves) and their - and -state hypernuclei (colored curves) obtained with the original SLy4 force (left) and the adjusted force (right) reproducing correctly the energies MeV and MeV. Markers indicate the energy minima.
It can be seen that the adjusted force reproduces correctly the energies of both and in their deformation minima, whereas the original force overbinds both nuclei by about 3 MeV. In the hypernucleus with the adjusted force, an -state is bound by MeV and a -state by MeV ([101]) or MeV ([110]). In the latter case both nuclear core and hyperon orbital are prolately deformed with , which causes an important gain in binding energy [20, 28, 53, 56, 57].
This is also decisive for the effect of the hyperon on the proton separation energy, which can better be seen by the precise values listed in Table II. Namely, the proton separation energies for , , hypernuclei
are MeV, respectively, compared to MeV of the core nucleus. Thus the coinciding deformation characteristics of core and hyperon indeed bind also the valence proton sufficiently strong to make the hypernucleus stable. This is not the case for a hyperon in the spherical state, or for the spherical calculation (4th column of Table II), where all hypernuclei remain unbound. Therefore an inclusion of deformation in the theoretical formalism is essential for our results.
Regarding the approximate calculation of the hypernucleus by adding to the cores’s experimental value, the values are similar for the deformed calculations with adjusted and original SLy4 and SkI4 forces (columns 3, 5, 7, 9), as long as the predicted deformations are also similar. The of the spherical calculations (columns 4, 6, 8, 10) are also similar (to those of the deformed calculations) for the compatible state (our results agree with those of [46]), but not for the -state hyperons. Thus this approximation can only be used with confidence for the states.
The previous discussion pertains also to the other (hyper)nuclei we investigated and the results are summarized in Table III, where we list the values of the relevant proton separation energies and also the removal energies of the various orbitals. The results show that the hypernuclei , , become stable, thus extending the proton drip point of their core nuclei. There are, however, no stable -state hypernuclei (as in [46]), hence the deformation effect is essential for the strong binding of the valence protons and the states (several MeV) in those hypernuclei. For completeness, the PESs for the stable nuclei , , are shown in Figure 2. They are all strongly prolate deformed (), and thus the binding of the state is enhanced by the same mechanism. We refer to the analogous discussion of in Figure 1 above. The remaining hypernuclei result unstable in all types of calculations we performed.

Figure 2. Same as Figure 1, but (a) for and with energies MeV and MeV, (b) for and with energies MeV and MeV, and (c) for and with energies MeV and MeV.
| core | |||||||||
Table III. Predicted critical proton separation energies or with the adjusted SLy4 force for the drip line hypernuclei candidates with the occupying different orbitals. The deformations of the core nuclei and the removal energies of the hypernuclei are also given. Bold face indicates stable hypernuclei.
Some comments are in order for : In [46] this hypernucleus was claimed to be stable with MeV, added to MeV of . However, in this particular case was calculated as the difference of the theoretical value for for and the experimental value for , breaking the consistency of the procedure (the theoretical value might be too large; theoretical errors are not compensating; see further discussion in [46]). Using theoretical values for both hypernuclei we obtain instead MeV, and thus a marginally unstable hypernucleus. This delicate case should be studied in more detail in the future, perhaps within a more suitable few-body model.
Summary
We investigated (hyper)nuclei at the proton drip line in the framework of the deformed SHF mean-field model with a combination of the interaction SLy4 or SkI4 and the interaction SLL4. The binding energies of the relevant core nuclei were fitted exactly by adjusting the parameters and of the original Skyrme forces. Then accurate values of the proton separation energies were obtained for the core nucleus and for the hypernucleus with a in either or states. The results are nearly independent of the force. We find that several deformed-core nuclei might become stabilized by the addition of a in a substate with the same deformation as the core, whereas the effect of a -state is not sufficiently strong. Our results affirm that , , , become stable nuclei, thus extending the proton drip point of their cores.
We compared the results with an approximate correction to the actual proton separation energy given by the difference of the removal energies of the involved hypernuclei, employing the unmodified forces. This approximation is only reliable for the -state hypernuclei, which are, however, not stable.
Thus deformed calculations allowing the gain of binding energy of the -state are essential for our predictions. Our results have to be confirmed by more accurate beyond-mean-field calculations, in particular regarding the theoretical modeling of deformation and weakly-bound states. Future experimental data will be very valuable to improve the theoretical models.
Acknowledgments
This work was supported by the National Natural Science Foundation of China under Grant Nos. 12175071, 12205103.
References
- [1]T. J. M. Symons et al., Phys. Rev. Lett. 42, 40 (1979).
- [2]G. D. Westfall, L. W. Wilson, P. J. Lindstrom, H. J. Crawford, D. E. Greiner, and H. H. Heckman, Phys. Rev. C 19, 1309 (1979).
- [3]A. Ozawa, T. Suzuki, and I. Tanihata, Nucl. Phys. A 693, 32 (2001).
- [4]B. Jonson, Phys. Rep. 389, 1 (2004).
- [5]E. Kwan, D. J. Morrissey, D. A. Davies, M. Steiner, C. S. Sumithrarachchi, and L. Weissman, Phys. Rev. C 86, 014612 (2012).
- [6]B. Li, N. Tang, and F.-S. Zhang, Nucl. Sci. Tech. 33, 55 (2022).
- [7]S. Kim, M.-H. Mun, M.-K. Cheoun, and E. Ha, Phys. Rev. C 105, 034340 (2022).
- [8]N. Tang, B. Li, J.-J. Li, and F.-S. Zhang, Phys. Rev. C 107, 014603 (2023).
- [9]E. M. Lykiardopoulou et al. (TITAN Collaboration), Phys. Rev. C 107, 024311 (2023).
- [10]I. Tanihata, Prog. Part. Nucl. Phys. 35, 505 (1995).
- [11]A. Mueller, Prog. Part. Nucl. Phys. 46, 359 (2001).
- [12]D. Vretenar, W. Pöschl, G. A. Lalazissis, and P. Ring, Phys. Rev. C 57, R1060 (1998).
- [13]T. Y. Tretyakova and D. E. Lanskoy, EPJA 5, 391 (1999).
- [14]X.-R. Zhou, A. Polls, H.-J. Schulze, and I. Vidaña, Phys. Rev. C 78, 054306 (2008).
- [15]C. Samanta, P. R. Chowdhury, and D. N. Basu, J. Phys. G 35, 065101 (2008).
- [16]D. Al and D. J. Millener, Phys. Lett. B 725, 445 (2013).
- [17]E. Hiyama, Few-Body Systems 56, 787 (2015).
- [18]J. Guo, D. H. Chen, X.-R. Zhou, Q. B. Chen, and H.-J. Schulze, Chin. Phys. C 46 (2022).
- [19]Y.-F. Chen, X.-R. Zhou, Q. B. Chen, and Y.-Y. Cheng, EPJA 58 (2022).
- [20]H.-T. Xue, Y.-F. Chen, Q. B. Chen, Y. A. Luo, H.-J. Schulze, and X.-R. Zhou, Phys. Rev. C 107, 044317 (2023).
- [21]H. Nemura, Y. Akaishi, and Y. Suzuki, Phys. Rev. Lett. 89, 142504 (2002).
- [22]E. Hiyama, M. Kamimura, T. Motoba, T. Yamada, and Y. Yamamoto, Phys. Rev. Lett. 85, 270 (2000).
- [23]M. Isaka, M. Kimura, A. Dote, and A. Ohnishi, Phys. Rev. C 83, 044323 (2011).
- [24]H. Mei, K. Hagino, J. M. Yao, and T. Motoba, Phys. Rev. C 97, 064318 (2018).
- [25]J.-W. Cui, X.-R. Zhou, L.-X. Guo, and H.-J. Schulze, Phys. Rev. C 95, 024323 (2017).
- [26]R. H. Dalitz and R. Levi Setti, Il Nuovo Cimento 30, 489 (1963).
- [27]L. Majling, Nucl. Phys. A 585, 211 (1995).
- [28]H.-T. Xue, Q. B. Chen, X.-R. Zhou, Y. Y. Cheng, and H.-J. Schulze, Phys. Rev. C 106 (2022).
- [29]S. V. Sidorov, D. E. Lanskoy, and T. Y. Tretyakova, Phys. Part. Nucl 53, 415 (2022).
- [30]T. Myo and E. Hiyama, Phys. Rev. C 107, 054302 (2023).
- [31]D. H. Davis and J. Piwnieski, Contemp. Phys. 27, 91 (1986).
- [32]P. K. Saha et al., Phys. Rev. Lett. 94, 052502 (2005).
- [33]S. Bagchi et al., Phys. Rev. Lett. 124, 225504 (2020).
- [34]M. Agnello et al., Phys. Rev. Lett. 108, 042501 (2012).
- [35]H. Sugimura et al., in European Physical Journal Web of Conferences, Vol. 66 (2014) p. 09017.
- [36]J. Yang et al., Nucl. Inst. Meth. Phys. Res. B 317, 263 (2013).
- [37]A. S. Botvina, N. Buyukcizmeçi, A. Ergun, R. Ogul, M. Bleicher, and J. Pochodzalla, Phys. Rev. C 94, 054615 (2016).
- [38]C. Rappold and J. López-Fidalgo, Phys. Rev. C 94, 044616 (2016).
- [39]Z.-Q. Feng, Phys. Rev. C 102, 044604 (2020).
- [40]T. R. Saito, H. Ekawa, and M. Nakagawa, EPJA 57, 159 (2021).
- [41]T. Saito et al., Nat. Rev. Phys. 3, 803 (2021).
- [42]“Hiaf,” https://hiaf.impcas.ac.cn/hiaf_en/public.
- [43]S. Avramenko et al., Nucl. Phys. A 547, 95 (1992).
- [44]T. R. Saito et al., Nucl. Phys. A 954, 199 (2016).
- [45]A. Andronic, P. Braun-Munzinger, J. Stachel, and H. Stöcker, Phys. Lett. B 697, 203 (2011).
- [46]D. E. Lanskoy, S. V. Sidorov, and T. Y. Tretyakova, EPJA 58, 203 (2022).
- [47]A. S. Kornilova, S. V. Sidorov, D. E. Lanskoy, and T. Y. Tretyakova, Phys. Part. Nucl. Lett. 20, 1142 (2023).
- [48]“Chart of hypernuclei,” https://hypernuclei.kph.uni-mainz.de.
- [49]X.-R. Zhou, H.-J. Schulze, H. Sagawa, C.-X. Wu, and E.-G. Zhao, Phys. Rev. C 76, 034312 (2007).
- [50]H. Schulze, M. T. Win, K. Hagino, and H. Sagawa, Prog. Theor. Phys. 123, 569 (2010).
- [51]Y. Jin, C. F. Chen, X.-R. Zhou, Y.-Y. Cheng, and H. J. Schulze, Prog. Theor. Phys. 2019 (2019).
- [52]Y. Jin, X.-R. Zhou, Y.-Y. Cheng, and H.-J. Schulze, EPJA 56, 135 (2020).
- [53]J. Guo, X.-R. Zhou, and H.-J. Schulze, Phys. Rev. C 104 (2021).
- [54]J. Guo, C. F. Chen, X.-R. Zhou, Q. B. Chen, and H.-J. Schulze, Phys. Rev. C 105, 034322 (2022).
- [55]C. F. Chen, Q. B. Chen, X.-R. Zhou, Y. Y. Cheng, J.-W. Cui, and H.-J. Schulze, Chin. Phys. C 46, 064109 (2022).
- [56]Y.-X. Liu, C. F. Chen, Q. B. Chen, H.-T. Xue, H.-J. Schulze, and X.-R. Zhou, Phys. Rev. C 108, 064312 (2023).
- [57]H.-T. Xue, Q. B. Chen, J.-W. Cui, C.-F. Chen, H.-J. Schulze, and X.-R. Zhou, Phys. Rev. C 109, 024324 (2024).
- [58]D. Vautherin and D. M. Brink, Phys. Rev. C 5, 626 (1972).
- [59]D. Vautherin, Phys. Rev. C 7, 296 (1973).
- [60]M. Bender, P.-H. Heenen, and P.-G. Reinhard, Rev. Mod. Phys. 75, 121 (2003).
- [61]J. Stone and P.-G. Reinhard, Prog. Part. Nucl. Phys. 58, 587 (2007).
- [62]J. Erler, P. Klüpfel, and P.-G. Reinhard, J. Phys. G 38, 033101 (2011).
- [63]H.-J. Schulze and E. Hiyama, Phys. Rev. C 90, 047301 (2014).
- [64]M. Rayet, Annu. Rev. Astron. Astrophys. 102, 226 (1976).
- [65]M. Rayet, Nucl. Phys. A 367, 381 (1981).
- [66]E. Chabanat, P. Bonche, P. Haensel, J. Meyer, and R. Schaeffer, Nucl. Phys. A 635, 231 (1998).
- [67]P.-G. Reinhard and H. Flocard, Nucl. Phys. A 584, 467 (1995).
- [68]N. Tajima, P. Bonche, H. Flocard, P.-H. Heenen, and M. Weiss, Nucl. Phys. A 551, 434 (1993).
- [69]T. Suzuki, H. Sagawa, and K. Hagino, Phys. Rev. C 68, 014317 (2003).
- [70]P. Ring and P. Schuck, The nuclear many-body problem (Springer Verlag, Berlin, 1980, 2004).
- [71]M. Bender, K. Rutz, P. Reinhard, J. Maruhn, and W. Greiner, Phys. Rev. C 60 (1999).
- [72]Y. Yamamoto, H. Bandō, and J. Žofka, Prog. Theor. Phys. 80, 757 (1988).
- [73]Y. Yamamoto, T. Motoba, and T. A. Rijken, Prog. Theor. Phys. Suppl. 185, 72 (2010).
- [74]H.-J. Schulze, in AIP Conference Proceedings, Vol. 2130 (AIP Publishing, USA, 2019) p. 020009.
- [75]S. Ajimura et al., Phys. Rev. Lett. 86, 4255 (2001).
- [76]T. Motoba, D. E. Lanskoy, D. J. Millener, and Y. Yamamoto, Nucl. Phys. A 804, 99 (2008).
- [77]“National nuclear data center,” https://www.nndc.bnl.gov/nudat3.
- [78]M. Wang, W. J. Huang, F. G. Kondev, G. Audi, and S. Naimi, Chin. Phys. C 45, 030003 (2021).