betaFeedback

WorksPhysics and Astronomy

Machine-accelerated extraction of experimental superconducting parameters for physical insight and prediction across thousands of materials

Abstract

New superconductors could unlock next-generation technologies from nuclear fusion to lossless electronics. Machine learning can predict candidate superconductors but lacks validated experimental training data beyond the critical temperature. Here we present AutoSuperCon, a database of eight superconducting parameters, containing 20354 entries for 6793 superconductors. The data were extracted from over 47000 arXiv preprints using a large language model and validated against reference datasets (R2=0.96R^2 = 0.96 with NIMS SuperCon). Using AutoSuperCon, we show that median gap ratios rise from 3.6 in conventional superconductors to 6.4 in cuprates, 28% of upper critical fields exceed the Pauli limit, and critical temperatures lie below a ceiling proportional to the superfluid density. Further, we train composition-based predictors for the critical temperature (Rlog⁡2=0.83R^2_{\log}=0.83) and the upper critical field (Rlog⁡2=0.69R^2_{\log}=0.69), boosted by transfer learning. Within known superconducting families, composition alone is sufficient to screen candidates for both parameters. AutoSuperCon thus enables physical insight and data-driven discovery across thousands of superconductors.

Introduction

Discovering new superconductors with desirable properties would advance technologies from high-efficiency electronics to medical imaging to nuclear fusion. However, superconductor discovery has historically owed more to chance than design [1]. For example, neither cuprate [2] nor iron-based [3] superconductors were predicted by theory. The same is true even for most conventional superconductors, whose phonon-mediated pairing is quantitatively described by the Bardeen–Cooper–Schrieffer (BCS) theory [4] and its extensions. Machine learning offers an alternative route to identifying candidate superconductors a priori, with models that can predict the critical temperature TcT_{\mathrm{c}}, the temperature below which a material superconducts, from the chemical composition or crystal structure [5, 6, 7, 8, 9, 10]. Such models are typically trained on materials from the NIMS SuperCon dataset [11], a compilation of superconductors and their critical temperatures.

The critical temperature alone, however, is insufficient in practice for identifying useful superconductors. For example, the upper critical field Hc2H_{\mathrm{c2}} bounds the fields at which superconducting magnets and cables can operate, and the critical current density JcJ_{\mathrm{c}} restricts the useful current that such conductors can carry [12]. First-principles theory can be used to compute these parameters [13], but is so far limited to conventional superconductors and does not extend to unconventional superconductors. Moreover, real materials contain defects and impurities, which are difficult to model, and so these parameters must be measured experimentally.

Experimental superconducting parameters beyond TcT_{\mathrm{c}} are routinely reported in the literature, but cannot be used to train machine learning models unless tabulated in structured datasets [14] [15]. While manual curation at this scale involves substantial human labour, the extraction process can be automated [16, 17], and several text-mined superconductor databases have appeared recently [18, 19, 20]. However, these efforts are either restricted to the critical temperature [18, 19] or largely unvalidated against reference data [20].

Here, we develop an automated workflow that uses a large language model (LLM) to extract experimentally measured superconducting parameters from open-access arXiv preprints. Supplemented with our digitisation of the Roberts [21] survey of pre-arXiv measurements [21], the resulting database, AutoSuperCon, comprises 20,354 entries for 6,793 superconductors, measured at both ambient (75%) and applied (25%) pressures, and includes the source(s) of each entry. It contains eight superconducting parameters: the critical temperature TcT_{\mathrm{c}}; the thermodynamic, lower, and upper critical fields HcH_{\mathrm{c}}, Hc1H_{\mathrm{c1}}, and Hc2H_{\mathrm{c2}}; the critical current density JcJ_{\mathrm{c}}; the coherence length ξ\xi; the penetration depth λ\lambda; and the superconducting gap Δ\Delta. After validating AutoSuperCon against reference datasets, we first test empirical relations between these parameters and find that gap ratios of unconventional superconductors deviate from weak-coupling BCS theory, upper critical fields frequently violate the Pauli limit, and critical temperatures respect a ceiling proportional to the superfluid density. We then use AutoSuperCon to train composition-based machine learning models to predict critical temperatures (Rlog⁡2=0.83R^2_{\log} = 0.83) and upper critical fields (Rlog⁡2=0.69R^2_{\log} = 0.69), boosted by transfer learning from the larger TcT_{\mathrm{c}} dataset. Neither model extrapolates to superconducting families withheld from training. Within known families, however, composition alone is sufficient to screen candidates for both parameters. parameters (Figure 1(c)).

Figure 1. The AutoSuperCon database. (a) Automated workflow from arXiv preprints and the Roberts [21] survey to the database. (b) Elements of the periodic table coloured by the number of superconductors in the database that contain them. (c) Database entries per superconducting parameter. The Roberts [21] survey contributes to TcT_c, HcH_c, Hc1H_{c1}, and Hc2H_{c2}.

Results and Discussion

Building the AutoSuperCon database

Our automated workflow (Figure 1(a)) extracts data from the more than 47,000 open-access preprints of arXiv’s superconductivity category using an LLM. To reduce the number of LLM calls, we split the text of each preprint into segments and pass a segment to the LLM only if it contains relevant keywords, e.g. “critical temperature”. For each superconducting parameter, a system prompt instructs the LLM to return the chemical composition of the material, the measured parameter value, and the experimental conditions, such as the applied pressure, sample form, or magnetic field orientation. Each entry carries the arXiv identifier of its source preprint.

There are multiple possible sources of error in the extracted data, and arXiv preprints are not peer-reviewed. We therefore clean the data by removing implausible values (Methods) and collapse duplicate entries by taking the median parameter value, while recording the number and spread of the contributing reports for each entry. For experimental data from before the arXiv era, we include entries for TcT_c, HcH_c, Hc1H_{c1}, and Hc2H_{c2} from the Roberts [21] survey of superconductor parameters [21]. The survey exists as a scanned typewritten report whose tables cannot be read by standard optical character recognition (OCR) software. We therefore transcribe them verbatim with a multimodal LLM and clean the output with a rule-based pipeline (Methods). In this way, AutoSuperCon contains 20,354 entries for 6,793 superconductors, spanning 84 elements (Figure 1(b)) and eight superconducting

Validation against reference data

To quantify the error introduced by our automated extraction workflow, we benchmark the database against reference data (Figure 2). For the 2,439 superconductors common to AutoSuperCon and NIMS SuperCon, the two databases show close agreement on TcT_c, with R2=0.96R^2 = 0.96 (Figure 2(a)). The full critical-temperature range is dominated by the cuprates, but the agreement holds even for the 2,014 superconductors with Tc≤30T_c \le30 K (R2=0.83R^2 = 0.83, Figure 2(b)). The worst outliers (circled in Figure 2(a)) each trace back to an identifiable failure mode, such as a transient photoinduced value read as an equilibrium TcT_c or a theoretical value read as a measurement. Such failures are rare, and the median deviation between the two databases is 0.25 K in absolute terms and 3.5% in relative terms. Disagreements do not always originate with our extraction, since NIMS SuperCon itself is known to contain erroneous records [5, 22]. We apply the same cleaning rules to every entry and keep these outliers, since selective removal would bias the database.

Figure 2. Validation against reference data. (a) AutoSuperCon TcT_{\mathrm{c}} compared with NIMS SuperCon for the superconductors in both databases (n=2,439n = 2{,}439, R2=0.96R^2 = 0.96). (b) The same comparison restricted to NIMS SuperCon Tc≤30T_{\mathrm{c}} \le30 K (n=2,014n = 2{,}014, R2=0.83R^2 = 0.83), including 36 points whose AutoSuperCon values lie beyond the displayed range. (c) arXiv-extracted critical fields compared with Roberts [21] for the 24 values reported by both at the same measurement temperature, within 0.05 K (Rlog⁡2=0.90R^2_{\log} = 0.90). In (a) and (b) points are coloured by local point density. Circled outliers in (a) and (c) are labelled by composition.

For the critical fields, the Roberts [21] survey serves as both a data source and a benchmark. We compare the two sources, the arXiv-extracted data and Roberts [21], only where both use the same measurement temperature, within 0.05 K. The 24 critical-field values that qualify agree with Rlog⁡2=0.90R^2_{\log} = 0.90 (Figure 2(c)), where Rlog⁡2R^2_{\log} is the coefficient of determination computed on log⁡10\log_{10}-transformed values. The two circled outliers are an extraction error and a genuine physical effect, the carrier-density dependence of superconductivity in SrTiO3_3 [23].

The remaining parameters have no tabulated reference database. For these we compare extracted values with published ranges for well-studied compounds spanning all major families, and all 19 values fall within those ranges. Thus, on every benchmark, errors are small compared with the range each parameter spans, and any individual value can be checked against its source preprint.

Testing empirical relations across superconducting families

With multiple experimental parameters for the same materials, AutoSuperCon enables cross-parameter empirical relations to be tested at scale. Figure 3 shows three such relations, each measured over hundreds to thousands of materials. We study bulk samples at ambient pressure, taking critical fields, penetration depths, and gaps in the zero-temperature limit.

Figure 3. Cross-parameter relations across the superconductor population. (a) Upper critical field as a function of critical temperature for 1,554 entries (one per material and magnetic field orientation), of which 28% exceed the weak-coupling Pauli limit μ0HP=1.86 T K−1×Tc\mu_{0}H_{\mathrm{P}} = 1.86\ \mathrm{T}\ \mathrm{K}^{-1} \times T_{\mathrm{c}}. (b) Critical temperature as a function of the inverse square of the in-plane penetration depth, 1/λ021/\lambda_{0}^{2} (Uemura plot), for 382 superconductors. An empirical ceiling Tcceiling∝1/λ02T_{\mathrm{c}}^{\mathrm{ceiling}} \propto1/\lambda_{0}^{2} bounds the population, placed for display at the 97.5th percentile of Tcλ02T_{\mathrm{c}}\lambda_{0}^{2}. (c) Distributions of gap ratios 2Δ/kBTc2\Delta/k_{\mathrm{B}}T_{\mathrm{c}} compared with the weak-coupling BCS s-wave value of 3.53. Circles mark family medians and whiskers the interquartile range, computed on the full distributions. Violin bodies are truncated at each family’s 95th percentile for display.

Figure 3(a) shows the upper critical field as a function of the critical temperature for 1,554 entries, one per material and magnetic field orientation, spanning four orders of magnitude in field. In weak-coupling BCS theory, upper critical fields are expected to lie below the Pauli limit (μ0HP=1.86\mu_0 H_{\mathrm{P}} = 1.86 T K−1×Tc^{-1} \times T_{\mathrm{c}}) [24, 25], above which the energy gained by aligning electron spins with the magnetic field should break singlet Cooper pairs. We find that 28% of entries exceed it. Violations are more common in the iron-based (66%) and heavy-fermion (59%) superconductors than in the cuprates (24%) and the predominantly conventional “other” superconductors (13%). Such violations are understood to arise from strong coupling [26], multiband effects [27], spin–orbit scattering [28], and non-singlet pairing [29].

In the underdoped cuprates, the critical temperature was found to scale with the superfluid density, Tc∝1/λ02T_{\mathrm{c}} \propto1/\lambda_0^2, where λ0\lambda_0 is the penetration depth at zero temperature [30]. This Uemura relation was later extended to other exotic superconductors [31]. Figure 3(b) shows the Uemura plot for the 382 superconductors in AutoSuperCon with measured in-plane penetration depths, and we find that the relation does not extend to the wider population. Instead, critical temperatures respect an empirical ceiling, Tcceil∝1/λ02T_{\mathrm{c}}^{\mathrm{ceil}} \propto1/\lambda_0^2. Such a ceiling has been rigorously derived for two-dimensional materials, independent of the pairing mechanism [32, 33], and holds approximately for layered materials with similar interlayer spacings [34].

Figure 3(c) shows distributions of the gap ratio 2Δ/kBTc2\Delta/k_{\mathrm{B}}T_{\mathrm{c}}, resolved by superconducting family. Each material enters once as the median of its reported gaps, which averages over anisotropy and multiband effects. Weak-coupling BCS theory predicts a ratio of 3.53 for an isotropic ss-wave gap [4]. As expected, the “other” superconductors lie close to this value (median 3.64), while the heavy-fermion (5.20), iron-based (4.68), and cuprate (6.35) distributions all lie above, with their medians exceeding even the ratio of the strongly coupled elemental superconductor Pb (2Δ/kBTc=4.52\Delta/k_{\mathrm{B}}T_{\mathrm{c}} = 4.5) [35].

Together, these relations provide quantitative metrics against which any future theory of unconventional superconductivity should be compared.

Predicting superconducting parameters from chemical composition

To test how well composition alone predicts superconducting parameters, we train models for the critical temperature and the upper critical field (Figure 4). Compositions are represented by Magpie descriptors [36], and the model used is TabPFN-3, a tabular foundation model [37, 38]. Every evaluation metric we report is computed on held-out materials, that is, materials not in the training set.

Figure 4. Composition predicts TcT_{\mathrm{c}} and Hc2H_{\mathrm{c2}} for held-out materials. (a) Predicted TcT_{\mathrm{c}} compared with AutoSuperCon values (n=5,843n = 5{,}843, Rlog⁡2=0.83R_{\log}^{2} = 0.83). (b) Predicted Hc2H_{\mathrm{c2}}, from composition and the predicted TcT_{\mathrm{c}}, compared with AutoSuperCon values (n=1,204n = 1{,}204, Rlog⁡2=0.69R_{\log}^{2} = 0.69). (c) Per-family Hc2H_{\mathrm{c2}} accuracy (Rlog⁡2R_{\log}^{2}) for models trained on composition only, on composition and the predicted TcT_{\mathrm{c}}, and on composition and the measured TcT_{\mathrm{c}}. All predictions are from TabPFN-3 under five-fold cross-validation. In (a) and (b) points are coloured by local point density, and the same five materials are circled and labelled by composition in both panels.

First, we train a model for critical-temperature prediction on the 5,843 superconductors from AutoSuperCon with bulk, ambient-pressure TcT_{\mathrm{c}} values. The model predicts held-out critical temperatures with Rlog⁡2=0.83R_{\log}^{2} = 0.83 and a median absolute error of 1.6 K (Figure 4(a)). For comparison, the canonical model trained on NIMS SuperCon [5] reaches Rlog⁡2≈0.88R^2_{\log} \approx0.88 from a training set of comparable size, but it was trained and evaluated only on materials with Tc>10T_c > 10 K.

Predicting the upper critical field is the harder and more valuable task. It helps determine whether a superconductor is useful for practical applications such as superconducting magnets and cables. To our knowledge, no machine-learned Hc2H_{c2} predictor trained on experimental data has been reported. We therefore train a model on the 1,204 superconductors from AutoSuperCon with an orientation-averaged Hc2H_{c2} value and find that predictions from composition alone match the measured values with Rlog⁡2=0.67R^2_{\log} = 0.67. Routing the prediction through the critical temperature raises this to 0.69 (Figure 4(b)). In this two-stage approach, the first stage predicts TcT_c from composition, and the second predicts Hc2H_{c2} using both composition and this predicted TcT_c as input. Replacing the predicted TcT_c with the measured value gives Rlog⁡2=0.79R^2_{\log} = 0.79, but only the two-stage approach can be applied to new materials whose critical temperatures have not yet been measured.

The two-stage construction is a form of transfer learning [39], in which information from a data-rich task improves a related data-poor one. Here the TcT_c dataset is almost five times the size of the Hc2H_{c2} one, and the predicted TcT_c carries useful information into the Hc2H_{c2} prediction. Because the first stage is trained only on materials outside the Hc2H_{c2} set (Methods), the gain reflects genuine transfer rather than information leakage. The gain in Hc2H_{c2} accuracy is small but statistically resolved (ΔRlog⁡2=+0.022\Delta R^2_{\log} = +0.022, 95% confidence interval [+0.008,+0.036][+0.008, +0.036]). Figure 4(c) shows the per-family accuracies.

Limits of composition-based prediction

In our machine learning analyses so far, predictions of TcT_c and Hc2H_{c2} are made with every superconducting family represented in the training data. The historic breakthroughs, however, were discoveries of wholly new families, and so the harder test is whether a model can predict an unseen class of superconductors [40]. We therefore perform a leave-one-family-out evaluation, withholding an entire family from training and predicting it. Figure 5 shows that both the TcT_c and Hc2H_{c2} predictors fail, most severely for the cuprate and iron-based families.

Figure 5. Neither predictor extrapolates to an unseen family. Per-family Rlog⁡2R^2_{\log} of the TabPFN-3 predictors under random five-fold cross-validation with every family represented in training (in-distribution), and under training with the evaluated family entirely withheld (leave-one-family-out). (a) The TcT_c predictor. (b) The Hc2H_{c2} predictor, with the family withheld from both the Hc2H_{c2} model and the TcT_c model that feeds it. Negative Rlog⁡2R^2_{\log} means that the predictions are worse than guessing the family mean. Off-scale bars are truncated and labelled with their values.

When withheld from training, the cuprates are predicted at Rlog⁡2=−10.2R^2_{\log} = -10.2 for TcT_c (Figure 5(a)), compared with 0.78 when present in training, and the iron-based family behaves similarly. The models are extrapolating conventional temperature and magnetic field scales onto materials that do not obey them. Predictions for heavy-fermion and “other” superconductors degrade more gently. Cuprates and iron-based materials form tight clusters in composition space, far from every other superconductor, so withholding one leaves no nearby material to learn from. Meanwhile, heavy-fermion and “other” materials lie closer to the rest of the population.

These findings expose a limitation of composition-based learning, one that could be partially overcome with more experimental training data. For example, when we treat the cuprates as a newly discovered family, with their Hc2H_{c2} data withheld but their critical temperatures known, the Hc2H_{c2} prediction improves from Rlog⁡2=−9.0R^2_{\log} = -9.0 (Figure 5(b)) to +0.4+0.4. Within known regions of composition space, where most materials optimisation happens, the predictors are accurate screening tools.

Conclusion

We constructed AutoSuperCon, a database of experimental superconducting parameters, using a large language model to extract data from arXiv preprints and historical literature. The database contains 20,354 entries covering 6,793 superconductors. It enables large-scale analysis of superconducting parameters and reveals quantitative deviations from weak-coupling BCS theory, including enhanced superconducting gap ratios and upper critical fields exceeding the Pauli limit. We also identified an empirical upper bound on critical temperatures linked to the superfluid density. Finally, the database allows the training of machine learning models that predict critical temperatures and upper critical fields directly from chemical composition, demonstrating the potential of AI-driven approaches to accelerate superconducting materials research.

Our automated extraction workflow is not specific to superconductivity and can be applied to frustrated magnets, topological matter, or any other class of quantum materials to build structured experimental databases. The ultimate goal is to have models trained on high-quality, reproducible data to predict experimental parameters and thereby guide the search for novel functional materials.

Methods

Corpus and LLM extraction

We downloaded all preprints from the arXiv cond-mat.supr-con category posted up to March 2026 and parsed the text with PyMuPDF (v1.26.7) [41]. Each preprint’s text was split into overlapping segments of 2,500 characters with a 500-character overlap, breaking preferentially at paragraph and sentence boundaries. We only considered segments if they contained a parameter keyword, a number with a compatible unit, and the substring “superconduct”. These segments were then processed by an LLM (OpenAI gpt-5-mini [42], 2025-08-07 snapshot) in strict structured-output mode. For each parameter, a system prompt with worked examples and a JSON schema instructed the model to return zero or more reported parameter values per segment. Each entry contains the chemical formula of the superconductor, the parameter value in a unit fixed by the schema, the experimental method, the sample form (e.g. thin film or bulk), and parameter-specific conditions such as the field orientation, measurement temperature, or applied pressure.

Cleaning and deduplication

We parsed chemical formulae with pymatgen [43] and standardised these with alphabetised elements and normalised coefficients. Formulae with unresolved variables (e.g. FeSe1−x_{1-x}Sx_x) were rejected. Implausible values were removed based on per-parameter allowed ranges. Further, entries for formulae with a noble gas were removed. For duplicate reports of the same formula under the same measurement conditions, we took the median value. Reports at an unspecified non-ambient pressure were pooled only within a single preprint. Cross-parameter consistency filters removed entries violating inequalities and

ratio bounds (e.g. Hc1<Hc<Hc2H_{\mathrm{c1}} < H_{\mathrm{c}} < H_{\mathrm{c2}} for type-II superconductors).

Digitisation of the Roberts (1976) survey

Table 5 of the Roberts [21] survey [21] is available only as a scan of a typewritten report that standard OCR cannot read. We passed images of the scanned pages to a multimodal LLM (Google Gemini 3 Flash) [44], instructed only to convert each image into a CSV table. The returned tables reproduce the printed columns and preserve units, sample-form notes, and anisotropy markers as printed. We used a deterministic pipeline to clean the 605 transcribed rows, converting units (1 kOe = 0.1 T), standardising formulae, recording the observation temperature, and collapsing duplicates of the same formula, temperature, and orientation to their median. This yielded 404 material rows, of which 363 are bulk and 41 are thin films. The thin-film rows are labelled as such and excluded from subsequent analyses, as with the rest of AutoSuperCon. We only add Roberts [21] rows where they do not duplicate an equivalent arXiv-extracted entry, totalling 639 entries (197 for TcT_{\mathrm{c}}, 46 for HcH_{\mathrm{c}}, 87 for Hc1H_{\mathrm{c1}}, and 309 for Hc2H_{\mathrm{c2}}), with 254 new superconductors not present in the arXiv-extracted data.

Validation

For comparing databases, we match entries based on their standardised formulae. Against NIMS SuperCon we compare per-formula critical temperatures and apply the same cleaning procedures described above to both datasets. For critical-field values we compare arXiv-extracted and Roberts (1976) data before merging, pairing values only where the two sources report the same measurement temperature to within 0.05 K. We further check parameter values for well-studied compounds against published ranges.

Data selection and families

For all quantitative analyses, we use bulk samples at ambient pressure, with critical fields, gaps, and penetration depths taken at zero temperature. The Uemura analysis uses in-plane (abab) penetration depths, with direction-unspecified entries where no abab measurement exists. Gap ratios use the directly reported ratio where given and otherwise the calculated ratio 2Δ/kBTc2\Delta/k_{\mathrm{B}}T_{\mathrm{c}}. We assign materials to families using their compositions, with the following rules applied in order. Iron-based requires Fe plus a pnictogen or chalcogen from {As, P, S, Se, Te}. Cuprate requires Cu and O. Nickelate requires Ni and O, excluding Ni-prenictide and Ni-chalcogenide compounds. Hydride requires H, D, or T. Heavy-fermion requires one of Ce, Pr, Yb, U, Np, or Pu, the elements whose partially filled, hybridising ff shells produce heavy-fermion behaviour [45]. Everything else is “other”. Hydrides are too few to resolve separately for ambient-pressure analyses and are shown with “other”.

Machine learning models

As input to machine learning models, we represent compositions numerically using 132 Magpie descriptors [36] computed with matminer [46]. For the machine learning analyses, we use the TabPFN-3 [37, 38] model. We also use a 300-tree random forest [47] as a cross-check, implemented in scikit-learn [48]. Targets are log⁡10\log_{10}-transformed and Rlog⁡2R^2_{\log} is computed relative to the y=xy=x line in log space. For all reported scores, we use held-out folds of a five-fold cross-validation, with confidence intervals from 10,000 bootstrap resamples of the held-out materials. We assess the gains from transfer learning with paired differences, in which both descriptor sets score the same materials and the difference in Rlog⁡2R^2_{\log} is bootstrapped over jointly resampled materials (10,000 resamples). For machine learning analysis of Hc2H_{c2}, we average over orientations using a measurement-weighted median per material, so no composition appears on both sides of a fold split. Entries without a measured TcT_c are dropped, leaving 1,204 materials. The first stage of the two-stage model is a single TcT_c fit on the 4,639 materials of the TcT_c cohort that are not among these 1,204, and so its predicted TcT_c is out of sample for every Hc2H_{c2} material. It is a separate TcT_c predictor from that of Figure 4(a).

Acknowledgments

We thank Steven Simon for scientific advice. M.M. acknowledges support from the EPSRC Centre for Doctoral Training in Superconductivity [EP/Y035453/1], the Clarendon Fund Scholarship, and the New College Graduate Award in MPLS at the University of Oxford. A.I.C. acknowledges support from an EPSRC Open Fellowship [UKRI3274], the EPSRC Centre for Doctoral Training in Superconductivity [EP/Y035453/1], and the Oxford Centre for Applied Superconductivity. B.G. and P.J.H. acknowledge funding from Grant No. NSF-DMREF2522891. P.J.H. is grateful for the partial support of the Leverhulme Trust during the research for this paper.

M.M. and A.I.C. conceived the study. M.M. built the extraction pipeline, assembled the database, and performed the analysis and the machine learning predictions. M.M. and A.I.C. wrote the paper. B.G. and P.J.H. contributed the Roberts [21] source material and the Pauli-limit analysis. A.I.C. supervised the research and secured funding. All authors discussed the results and approved the manuscript.

References

References

  1. [1]H. Hosono, K. Tanabe, E. Takayama-Muromachi, H. Kageyama, S. Yamanaka, H. Kumakura, M. Nohara, H. Hiramatsu, and S. Fujitsu, Exploration of new superconductors and functional materials, and fabrication of superconducting tapes and wires of iron pnictides, Sci. Technol. Adv. Mater. 16, 033503 (2015).
  2. [2]J. G. Bednorz and K. A. Müller, Possible high $T_c$ superconductivity in the Ba–La–Cu–O system, Z. Phys. B Condens. Matter 64, 189 (1986).DOI
  3. [3]Y. Kamihara, T. Watanabe, M. Hirano, and H. Hosono, Iron-based layered superconductor La[O$_{1-x}$F$_x$]FeAs (x = 0.05–0.12) with $T_c$ = 26 K, J. Am. Chem. Soc. 130, 3296 (2008).
  4. [4]J. Bardeen, L. N. Cooper, and J. R. Schrieffer, Theory of superconductivity, Phys. Rev. 108, 1175 (1957).
  5. [5]V. Stanev, C. Oses, A. G. Kusne, E. Rodriguez, J. Paglione, S. Curtarolo, and I. Takeuchi, Machine learning modeling of superconducting critical temperature, npj Comput. Mater. 4, 29 (2018).
  6. [6]B. Roter and S. V. Dordevic, Predicting new superconductors and their critical temperatures using machine learning, Physica C 575, 1353689 (2020).DOI
  7. [7]T. Konno, H. Kurokawa, F. Nabeshima, Y. Sakishita, R. Ogawa, I. Hosako, and A. Maeda, Deep learning model for finding new superconductors, Phys. Rev. B 103, 014509 (2021).DOI
  8. [8]O. Lesser, Y. Liu, N. Maus, A. Panigrahi, K. Mallayya, A. Gong, A. Kabra, S. B. Lee, S. Chatterjee, A. Merino, K. Q. Weinberger, L. M. Schoop, J. R. Gardner, and E.-A. Kim, Electron-affinity difference distributions as an organizing principle for superconductivity, enabling the discovery of PtPb₃Bi (2025), arXiv:2510.07373.arxiv.org/abs/2510.07373
  9. [9]J. B. Gibson, A. C. Hire, P. M. Dee, O. Barrera, B. Geisler, P. J. Hirschfeld, and R. G. Hennig, Accelerating superconductor discovery through tempered deep learning of the electron-phonon spectral function, npj Comput. Mater. 11, 7 (2025).DOI
  10. [10]J. B. Gibson, A. C. Hire, P. Prakash, P. M. Dee, B. Geisler, J. S. Kim, Z. Li, J. J. Hamlin, G. R. Stewart, P. J. Hirschfeld, and R. G. Hennig, Developing a complete AI-accelerated workflow for superconductor discovery, npj Comput. Mater. 12, 95 (2026).arxiv.org/abs/2503.20005
  11. [11]Center for Basic Research on Materials, National Institute for Materials Science, MDR SuperCon Datasheet Ver.240322 (2024), https://doi.org/10.4805/nims.4487.
  12. [12]D. Larbalestier, A. Gurevich, D. M. Feldmann, and A. Polyanskii, High-$T_c$ superconducting materials for electric power applications, Nature 414, 368 (2001).
  13. [13]B. Geisler, P. M. Dee, J. J. Hamlin, G. R. Stewart, R. G. Hennig, and P. J. Hirschfeld, Towards the discovery of high critical magnetic field superconductors, npj Comput. Mater. 10.1038/s41524-026-02266-9 (2026).arxiv.org/abs/2601.21044
  14. [14]A. Jain, S. P. Ong, G. Hautier, W. Chen, W. D. Richards, S. Dacek, S. Cholia, D. Gunter, D. Skinner, G. Ceder, and K. A. Persson, Commentary: The Materials Project: a materials genome approach to accelerating materials innovation, APL Mater. 1, 011002 (2013). [15] S. Kirklin, J. E. Saal, B. Meredig, A. Thompson, J. W. Doak, M. Aykol, S. Rühl, and C. Wolverton, The Open Quantum Materials Database (OQMD): assessing the accuracy of DFT formation energies, npj Comput. Mater. 1, 15010 (2015).
  15. [16]M. C. Swain and J. M. Cole, ChemDataExtractor: a toolkit for automated extraction of chemical information from the scientific literature, J. Chem. Inf. Model. 56, 1894 (2016).DOI
  16. [17]J. Dagdelen, A. Dunn, S. Lee, N. Walker, A. S. Rosen, G. Ceder, K. A. Persson, and A. Jain, Structured information extraction from scientific text with large language models, Nat. Commun. 15, 1418 (2024).DOI
  17. [18]L. Foppiano, P. Baptista de Castro, P. Ortiz Suarez, K. Terashima, Y. Takano, and M. Ishii, Automatic extraction of materials and properties from superconductors scientific literature, Sci. Technol. Adv. Mater.: Methods 3, 2153633 (2023).DOI
  18. [19]C. J. Court and J. M. Cole, Magnetic and superconducting phase diagrams and transition temperatures predicted using text mining and machine learning, npj Comput. Mater. 6, 18 (2020).DOI
  19. [20]S. Itani, Y. Zhang, R. Itani, and J. Zang, Large language models for superconductor discovery, J. Magn. Magn. Mater. 652, 174189 (2026).arxiv.org/abs/2512.10847
  20. [21]B. W. Roberts, Survey of superconductive materials and critical evaluation of selected properties, J. Phys. Chem. Ref. Data 5, 581 (1976).DOI
  21. [22]K. Hamidieh, A data-driven statistical model for predicting the critical temperature of a superconductor, Comput. Mater. Sci. 154, 346 (2018).arxiv.org/abs/1803.10260
  22. [23]C. Collignon, X. Lin, C. W. Rischau, B. Fauqué, and K. Behnia, Metallicity and superconductivity in doped strontium titanate, Annu. Rev. Condens. Matter Phys. 10, 25 (2019).DOI
  23. [24]A. M. Clogston, Upper limit for the critical field in hard superconductors, Phys. Rev. Lett. 9, 266 (1962).DOI
  24. [25]B. S. Chandrasekhar, A note on the maximum critical field of high-field superconductors, Appl. Phys. Lett. 1, 7 (1962).DOI
  25. [26]T. P. Orlando, E. J. McNiff, S. Foner, and M. R. Beasley, Critical fields, Pauli paramagnetic limiting, and material parameters of Nb₃Sn and V₃Si, Phys. Rev. B 19, 4545 (1979).DOI
  26. [27]A. Gurevich, Iron-based superconductors at high magnetic fields, Rep. Prog. Phys. 74, 124501 (2011).DOI
  27. [28]N. R. Werthamer, E. Helfand, and P. C. Hohenberg, Temperature and purity dependence of the superconducting critical field, Hc2. III. Electron spin and spin-orbit effects, Phys. Rev. 147, 295 (1966).
  28. [29]S. Ran, C. Eckberg, Q.-P. Ding, Y. Furukawa, T. Metz, S. R. Saha, I.-L. Liu, M. Zic, H. Kim, J. Paglione, and N. P. Butch, Nearly ferromagnetic spin-triplet superconductivity, Science 365, 684 (2019).DOI
  29. [30]Y. J. Uemura, G. M. Luke, B. J. Sternlieb, J. H. Brewer, J. F. Carolan, W. N. Hardy, R. Kadono, J. R. Kempton, R. F. Kiefl, S. R. Kreitzman, P. Mulhern, T. M. Riseman, D. L. Williams, B. X. Yang, S. Uchida, H. Takagi, J. Gopalakrishnan, A. W. Sleight, M. A. Subramanian, C. L. Chien, M. Z. Cieplak, G. Xiao, V. Y. Lee, B. W. Statt, C. E. Stronach, W. J. Kossler, and X. H. Yu, Universal correlations between Tc and ns/m* (carrier density over effective mass) in high-Tc cuprate superconductors, Phys. Rev. Lett. 62, 2317 (1989).
  30. [31]Y. J. Uemura, L. P. Le, G. M. Luke, B. J. Sternlieb, W. D. Wu, J. H. Brewer, T. M. Riseman, C. L. Seaman, M. B. Maple, M. Ishikawa, D. G. Hinks, J. D. Jorgensen, G. Saito, and H. Yamochi, Basic similarities among cuprate, bismuthate, organic, Chevrel-phase, and heavy-fermion superconductors shown by penetration-depth measurements, Phys. Rev. Lett. 66, 2665 (1991).pubmed.ncbi.nlm.nih.gov/10043580
  31. [32]T. Hazra, N. Verma, and M. Randeria, Bounds on the superconducting transition temperature: applications to twisted bilayer graphene and cold atoms, Phys. Rev. X 9, 031049 (2019).DOI
  32. [33]M. Randeria, Bounds on the superconducting transition temperature, Mod. Phys. Lett. B 38, 2430004 (2024).
  33. [34]E. W. Carlson, S. A. Kivelson, V. J. Emery, and E. Manousakis, Classical phase fluctuations in high temperature superconductors, Phys. Rev. Lett. 83, 612 (1999).DOI
  34. [35]J. P. Carbotte, Properties of boson-exchange superconductors, Rev. Mod. Phys. 62, 1027 (1990).DOI
  35. [36]L. Ward, A. Agrawal, A. Choudhary, and C. Wolverton, A general-purpose machine learning framework for predicting properties of inorganic materials, npj Comput. Mater. 2, 16028 (2016).DOI
  36. [37]N. Hollmann, S. Müller, L. Purucker, A. Krishnakumar, M. Körfer, S. B. Hoo, R. T. Schmiedmeister, and F. Hutter, Accurate predictions on small data with a tabular foundation model, Nature 637, 319 (2025).DOI
  37. [38]L. Grinsztajn, K. Flöge, O. Key, F. Birkel, P. Jund, B. Roof, M. Manium, S. B. Hoo, M. Bühler, A. Garg, D. Safaric, J. Robertson, B. Jäger, S. Alessi, A. Hayler, V. Moroshan, L. Purucker, P. Singer, A. Arazi, J. Siems, J. H. Metzen, G. Grab, N. Erickson, S. Guo, E. Kalfon, S. Bing, D. Salinas, C. Cornu, L. C. Wehrhahn, D. Kriuchkova, K. Kaya, L. Sidhoum, M. Salmon, J. Chen, M. Hulsebos, Y. LeCun, S. Müller, B. Schölkopf, S. Gambhir, N. Hollmann, and F. Hutter, TabPFN-3: technical report (2026), arXiv:2605.13986.arxiv.org/abs/2605.13986
  38. [39]S. J. Pan and Q. Yang, Survey on transfer learning, IEEE Trans. Knowl. Data Eng. 22, 1345 (2010).
  39. [40]B. Meredig, E. Antono, C. Church, M. Hutchinson, J. Ling, S. Paradiso, B. Blaizsik, I. Foster, B. Gibbons, J. Hattrick-Simpers, A. Mehta, and L. Ward, Can machine learning identify the next high-temperature superconductor? Examining extrapolation performance for materials discovery, Mol. Syst. Des. Eng. 3, 819 (2018).DOI
  40. [41]Artifex Software, PyMuPDF (2025), version 1.26.7, https://github.com/pymupdf/PyMuPDF.
  41. [42]OpenAI, OpenAI GPT-5 System Card (2025), arXiv:2601.03267.
  42. [43]S. P. Ong, W. D. Richards, A. Jain, G. Hautier, M. Kocher, S. Cholia, D. Gunter, V. L. Chevrier, K. A. Persson, and G. Ceder, Python Materials Genomics (pymatgen): a robust, open-source Python library for materials analysis, Comput. Mater. Sci. 68, 314 (2013).DOI
  43. [44]Google DeepMind, Gemini 3 Flash model card (2025), https://deepmind.google/models/model-cards/gemini-3-flash/.
  44. [45]C. Pfleiderer, Superconducting phases of f-electron compounds, Rev. Mod. Phys. 81, 1551 (2009).DOI
  45. [46]L. Ward, A. Dunn, A. Faghianinia, N. E. R. Zimmermann, S. Bajaj, Q. Wang, J. Montoya, J. Chen, K. Bystrom, M. Dylla, K. Chard, M. Asta, K. A. Persson, G. J. Sny der, I. Foster, and A. Jain, matminer: an open source toolkit for materials data mining, Comput. Mater. Sci. 152, 60 (2018).
  46. [47]L. Breiman, Random forests, Mach. Learn. 45, 5 (2001).
  47. [48]F. Pedregosa, G. Varoquaux, A. Gramfort, V. Michel, B. Thirion, O. Grisel, M. Blondel, P. Prettenhofer, R. Weiss, V. Dubourg, J. Vanderplas, A. Passos, D. Cournapeau, M. Brucher, M. Perrot, and É. Duchesnay, scikit-learn: machine learning in Python, J. Mach. Learn. Res. 12, 2825 (2011).arxiv.org/abs/1201.0490

Paper details

vlnc:W_f9d852qz
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 5

downloads · 1

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

a large language model

View statement
Looking for related papers…
Contents