betaFeedback

WorksPhysics and Astronomy

Crystalline water intercalation into the Kitaev honeycomb cobaltate Na2_2Co2_2TeO6_6

Abstract

We herein report the successful intercalation of water molecules into the layered honeycomb lattice of Na2_2Co2_2TeO6_6, a Kitaev-candidate compound, to obtain the hydrated phase Na2_2Co2_2TeO6_6⋅\cdotyyH2_2O (y∼y \sim 2.4). Fourier transform infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry, and Rietveld refinements indicate that crystalline water resides between the cobalt-based honeycomb layers. This insertion of neutral molecules significantly alters the crystal structure, increasing the interlayer spacing and modifying the local bonding environment. Magnetization measurements reveal an antiferromagnetic transition at TN∼17.2T_N \sim 17.2 K, accompanied by a discernible weak ferromagnetic component. The application of moderate magnetic fields induces a spin-flop reorientation at μ0H∼5.7μ_0H \sim 5.7 T. The λλ-type anomaly and long-range order persist up to 9 T, showing the reconfiguration of the ground state as opposed to its suppression. Heat-capacity analysis reveals the full 2Rln⁡22R\ln2 magnetic entropy expected for two Jeff=1/2J_{\rm eff} = 1/2 moments per formula unit, confirming the pseudospin description. These findings demonstrate that water intercalation is a robust strategy for tuning the magnetic properties of honeycomb lattice materials. Overall, this study highlights neutral-molecule insertion as a promising route toward the discovery and engineering of quantum magnets based on layered transition metal oxides.

Introduction

The discovery of unconventional charge-neutral quasiparticle excitations in quantum many-body systems has recently emerged as a central issue in condensed matter physics [1, 2, 3]. Quantum spin liquids (QSLs) are of particular interest because they exhibit no long-range magnetic order, even at temperatures near absolute zero, although they retain liquid-like spin fluctuations [4, 5, 6, 7]. In most spin systems, long-range magnetic order emerges in the ground state. However, under sufficiently strong frustration, the magnetic order is suppressed and the spin degrees of freedom can become “fractionalized,” behaving as independent quasiparticles. Although numerous theoretical approaches have been proposed to elucidate and realize QSL states, the Kitaev model has garnered particular attention because it hosts a QSL ground state and can be exactly solved [8, 9].

The Kitaev model is characterized as a spin-1/2 system with a honeycomb lattice, in which bond-dependent Kitaev interactions represent a paradigmatic example of a QSL [10]. More recently, attention has extended beyond low-spin d5d^{5} systems to include

high-spin d7d^{7} candidates. In such systems, the interplay between t2gt_{2g} and ege_{g} orbitals—and their relationship to lattice distortions—gives rise to alternative avenues for Kitaev physics [11, 12]. However, despite intense theoretical and experimental efforts, most candidate compounds still exhibit magnetic ordering at finite temperatures, instead of forming QSLs [13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45]. The following two main factors appear to limit the formation of Kitaev QSLs: (1) competition among several exchange interactions—including isotropic Heisenberg and off-diagonal anisotropic terms—which are comparable in magnitude to Kitaev interactions, and (2) local structural distortions and orbital hybridization modifications, which reduce the effective spin–orbit-driven Kitaev term [46].

These challenges are particularly severe in high-spin d7d^{7} systems. In these materials, the superexchange pathways involve both t2gt_{2g} and ege_{g} orbitals, resulting in complex exchange mechanisms. Furthermore, local distortions such as trigonal distortions often affect the interorbital interactions, making it difficult for the Kitaev interactions to dominate. Consequently, local structural distortions must be effectively and selectively controlled to realize Kitaev physics. Conventional routes, such as chemical substitution and high-pressure synthesis, have been explored extensively; however, they have not produced a QSL phase.

A promising solution, occasionally referred to as “supra ceramics,” involves intercalating molecular units into an inorganic crystal framework to modify the local structure [47]. Water (H2O\mathrm{H_2O}) molecules are especially attractive for this purpose because they are electrically neutral, thereby minimizing changes in the valence state, and they offer rich local degrees of freedom through hydrogen bonding. These features enable selective local distortions that are difficult to achieve through traditional chemical or physical pressure.

Na2Co2TeO6\mathrm{Na_2Co_2TeO_6} is a layered honeycomb Mott insulator in which Co2+\mathrm{Co^{2+}} (3d73d^7) ions form an edge-sharing octahedral network that orders in a zigzag-type antiferromagnetic structure below TN≈27T_{\mathrm{N}} \approx27 K [23]. Magnetic susceptibility measurements yield an effective moment of μeff≈5.64μB\mu_{\mathrm{eff}} \approx5.64 \mu_{\mathrm{B}} per Co, which is consistent with high-spin S=3/2S = 3/2 ions that map onto Jeff=1/2J_{\mathrm{eff}} = 1/2 pseudospins under trigonal compression and spin–orbit coupling [23]. First-principles calculations show that trigonal distortions split the Co t2gt_{2g} manifold and, together with strong spin–orbit coupling, give rise to an effective Jeff=1/2J_{\mathrm{eff}} = 1/2 ground state with significant XY-type anisotropy [16, 19, 48]. Such a pseudospin basis is necessary for Kitaev-type bond-dependent exchange; however, in Na2Co2TeO6\mathrm{Na_2Co_2TeO_6} this Kitaev term competes with sizable isotropic Heisenberg (J1J_1, J3J_3) and off-diagonal Γ\Gamma terms of comparable magnitude [20]. Because the pristine electronic structure features this delicate balance of competing exchanges and orbital anisotropies, further local distortions—such as those induced by water intercalation—can tip the system closer to or farther from the Kitaev QSL regime [11, 12, 13].

On the basis of these insights into the pristine electronic and magnetic properties of Na2Co2TeO6\mathrm{Na_2Co_2TeO_6}, we investigated how controlled H2O\mathrm{H_2O} intercalation perturbs this balance and modifies the structural framework and resulting magnetic order. Our initial findings showed that this material spontaneously incorporates water under ambient conditions, leading to partial expansion of the interlayer spacing. However, the hydrated phase fraction produced under these conditions was minimal, which hindered systematic structural investigation. Therefore, we developed a method for targeted synthesis of the hydrated phase, Na2Co2TeO6⋅yH2O\mathrm{Na_2Co_2TeO_6\cdot yH_2O}, which involved stirring the parent compound in warm water under carefully controlled conditions. Hence, we produced a sufficient quantity for detailed measurements. We used X-ray diffraction, thermogravimetric analysis, and magnetic susceptibility studies to investigate how H2O\mathrm{H_2O} intercalation distorts the

XRD patterns of Na2Co2TeO6 before and after immersion in water

Figure 1. XRD patterns of Na2Co2TeO6\mathrm{Na_2Co_2TeO_6} before (top, black) and after (bottom, red) immersion in water at 60 °C for 7 d under stirring. After immersion, the peaks corresponding to the interlayer spacing shifted toward lower angles, indicating an increase in the interlayer distance.

CoO6_6 octahedra and the effects on the Kitaev and other spin-exchange interactions. We assessed these changes based on the variations in the antiferromagnetic transition temperature and Weiss temperature.

Experimental Methods

The precursor Na2Co2TeO6\mathrm{Na_2Co_2TeO_6} was prepared using a conventional solid-state reaction method [14]. Specifically, Na2CO3\mathrm{Na_2CO_3} (FUJIFILM Wako Pure Chemical Corporation, 99.8%), CoO (Kojundo Chemical Lab. Co., Ltd., 99.7%), and TeO2\mathrm{TeO_2} (Kojundo Chemical Lab. Co., Ltd., 99.9%) were weighed out with a molar ratio of 1.05:2:1 and then heated in air at 900 °C for 96 h. The resulting polycrystalline Na2Co2TeO6\mathrm{Na_2Co_2TeO_6} powder was sealed in a Teflon-lined stainless-steel autoclave with distilled water and heated at 60 °C for 7 d under stirring to achieve hydration.

Powder X-ray diffraction (XRD) measurements before hydration, after hydration, and after dehydration at 200 or 300 °C for 12 h were performed using Cu-Kα\alpha radiation. Rietveld refinements and maximum entropy method (MEM) analyses were conducted using the Z-RIETVELD software package [49].

Fourier-transform infrared (FT-IR) spectroscopy was used to verify the intercalation of H2O\mathrm{H_2O} and to distinguish between intact water molecules and hydroxyl groups. The FT-IR measurements were conducted using an FT/IR-4700 (JASCO) with the single attenuated total reflection method (JASCO, ATR PRO 650G). Additional spectra were collected from CoSO4⋅7H2O\mathrm{CoSO_4\cdot7H_2O} and Co(OH)2_2 as references. Thermogravimetric analysis (TGA) under a nitrogen atmosphere coupled with quadrupole mass spectrometry (QMS) was used to detect and identify the gaseous products that evolved upon heating. The ion signals were monitored at their corresponding mass-to-charge ratios m/zm/z. The TGA data were acquired using a Thermo Plus EVO2 TG-DTA8122 (Rigaku) and the QMS measurements were conducted using a Transpector CPM (Inficon).

The magnetic properties were measured using a magnetic property measurement system (MPMS; Quantum Design) at the Institute for Solid State Physics (ISSP), the University of Tokyo. The temperature-dependent magnetic susceptibilities were measured under magnetic fields between 10 mT and 7 T, and isothermal magnetization curves were recorded at temperatures between 2 and 30 K. The temperature dependence of the heat capacity was measured using the conventional relaxation method in a physical property measurement system (PPMS; Quantum Design) at ISSP, the University of Tokyo.

Results

Crystal structure

Figure 1 shows the XRD patterns for Na2_2Co2_2TeO6_6 before and after immersion in water at 60 °C for 7 d under stirring. After treatment, the 00ll Bragg peaks

shifted toward lower angles, indicating an increase in the interlayer spacing from ~5.61 to ~6.95 Å. This shift is consistent with related findings in other honeycomb-layered hydrates such as Na0.85_{0.85}Co2_2SbO6_6·1.7H2_2O [15] and NaNi2_2BiO6−δ_{6-\delta}·1.7H2_2O [50]. Similar trends have also been observed in triangular-layered hydrates such as Nax_xCoO2_2·yyH2_2O [51, 52], Na0.3_{0.3}NiO2_2·0.7H2_2O [53], Na0.22_{0.22}RuO2_2·0.45H2_2O [54], and Na0.3_{0.3}RhO2_2·0.6H2_2O [55]. as well as in various hydrated alkaline-intercalated transition metal dichalcogenides [56, 57, 58, 59, 60, 61, 62, 63, 64, 65]. These parallels suggest a common structural response to hydration across different layered materials. In these compounds, water intercalation increases the interlayer gap by approximately 1.4 Å, which closely matches the expansion observed for Na2_2Co2_2TeO6_6. Therefore, these results support the conclusion that water molecules were inserted between the layers to form Na2_2Co2_2TeO6_6·yH2_2O.

The presence of intercalated water was confirmed by recording FT-IR spectra for pristine and hot-water-treated Na2_2Co2_2TeO6_6 (Figure 2). The treated sample exhibited distinct absorption peaks at approximately 3400 and 1600 cm−1^{-1}, corresponding to the stretching and bending modes of H2_2O, respectively [66]. These features also appeared in the reference compound CoSO4_4·7H2_2O, reinforcing the conclusion that H2_2O was incorporated into the crystal structure. No discernible bands attributable to OH groups were observed, indicating that the H2_2O molecules remained intact rather than being converted into OH bonds.

FT-IR spectra of Na₂Co₂TeO₆ before and after immersion in water, with reference spectra of CoSO₄·7H₂O and Co(OH)₂

Figure 2. FT-IR spectra of Na2_2Co2_2TeO6_6 before (black) and after (red) immersion in water at 60 °C for 7 d under stirring. The spectra of CoSO4_4·7H2_2O (yellow) and Co(OH)2_2 (green) are also shown for comparison. The upward triangle markers indicate absorption bands originating from H2_2O.

This was further corroborated by comparison with Co(OH)2_2, which showed a strong peak at 3600 cm−1^{-1} arising from the OH groups [67]. Hence, in the hot-water-treated Na2_2Co2_2TeO6_6, water was intercalated as molecular H2_2O, which expanded the interlayer and modified the magnetic interlayer coupling.

Figure 3 shows the TGA/QMS analysis of Na2_2Co2_2TeO6_6·yH2_2O. Stepwise weight loss was accompanied by a detectable ion current at m/z=18m/z = 18, which corresponds to the release of H2_2O up to 500 °C. From the total weight loss, the water content before heating was estimated to be y=2.4y = 2.4. The two distinct peaks in the QMS data indicate the presence of two inequivalent water sites, consistent with the structural model described below.

TGA and QMS results for hydrated Na₂Co₂TeO₆

Figure 3. TGA and QMS results for Na2_2Co2_2TeO6_6·yyH2_2O under an N2_2 atmosphere. The orange curve indicates the mass change during the heating process, while the blue curve shows the ion current for m/zm/z = 18, which was attributed to the desorption of H2_2O.

Figure 4 shows the changes in the XRD profile of Na2_2Co2_2TeO6_6·yH2_2O after heat treatment at 200 and 300 °C, which indicates that the interlayer spacing was approximately the same as that of the pristine phase.

XRD patterns before hydration, after hydration, after dehydration, and after rehydration

Figure 4. XRD patterns before hydration (Na2_2Co2_2TeO6_6, black), after hydration (Na2_2Co2_2TeO6_6·yyH2_2O, red), after dehydration at 200 °C (ochre), after dehydration at 300 °C (brown), and after rehydration of the sample dehydrated at 300 °C (purple). The diamond markers highlight peaks attributed to impurities, which likely formed during dehydration.

This demonstrates the reversibility of the hydration reaction. This process reflects the release of crystalline water, in line with the TGA/QMS results. However, the interlayer spacings at 200 and 300 °C (~5.62 and ~5.60 Å, respectively) were slightly offset from the original value (~5.61 Å). Moreover, impurities appeared to form during dehydration and persisted after rehydration, which yielded a hydrated phase with an interlayer spacing of 7.089 Å. Comparing the magnetic susceptibilities of the dehydrated and prehydrated samples (see Supplementary Information [68]) indicated that the hydration–dehydration process was not fully reversible. Partial structural collapse and/or Na removal may have accompanied these cycles, affecting the purity and structural integrity of the sample. Despite these complications, the overall observations confirm the formation of Na₂Co₂TeO₆·yyH₂O after immersing Na₂Co₂TeO₆ in hot water under stirring.

Figure 5(a) compares the fitted and observed diffraction patterns from the Rietveld refinement of Na₂Co₂TeO₆·yyH₂O. The major Bragg reflections were indexed to the P6₃/mcmmcm space group, analogous to that of K₂Co₂TeO₆ [35], rather than the P6₃22 symmetry of pristine Na₂Co₂TeO₆ [14]. A structural model was generated by substituting Na for K in the K₂Co₂TeO₆ framework and introducing oxygen atoms corresponding to water molecules within the Na layer. Following initial refinement, MEM was used to construct an electron density map and refine the positions and site occupancies of Na and water. Iterative feedback between the Rietveld refinement and MEM yielded the final structural model shown in Figure 5(b), which had reliability factors Rwp=8.29%R_{\mathrm{wp}} = 8.29\% and S=1.02S = 1.02. The refined structural parameters are summarized in Table 1.

Rietveld refinement, structural changes, and three-dimensional electron density distribution of Na₂Co₂TeO₆·yH₂O

Figure 5. (a) Rietveld refinement of Na2_2Co2_2TeO6_6·yH2_2O. The observed intensities, calculated intensities, and their difference are shown in red, black, and blue. Green vertical bars indicate the positions of the Bragg reflections. Asterisks mark the impurity peaks. (b) Schematic showing the structural changes in Na2_2Co2_2TeO6_6 before and after hydration. The crystal structures were visualized using the VESTA program [69]. (c) Three-dimensional electron density distribution of Na2_2Co2_2TeO6_6·yH2_2O, calculated via MEM.

AtomSiteOccupancyxxyyzzBB (Å)
Co4d4d12/32/31/31/300.92294(15)
Te2b2b10000.078459(13)
Na14c4c0.01(2)2/32/31/31/31/41/41.3212(2)
Na212j12j0.33(4)0.588(2)−0.173(5)1/41/41.3212(2)
O12j12j10.690(3)0.690(3)0.57260(15)0.48566(8)
WO12a2a0.32(4)001/41/41.3212(2)
WO212j12j0.34(4)0.588(2)−0.173(5)1/41/41.3212(2)

Table 1. Crystallographic parameters of Na2_2Co2_2TeO6_6·yH2_2O determined from powder XRD data. The structure was refined in the space group P63_3/mcm, with lattice constants a=5.3160(12)a = 5.3160(12) Å and c=13.897(3)c = 13.897(3) Å. BB denotes the atomic displacement parameter. WO denotes the oxygen in the H2_2O molecule.

Two distinct crystallographic sites for water, WO1 and WO2, were identified in the final model, corroborating the two H₂O release processes observed using QMS. Both water sites were located in the same plane as the partially occupied Na sites. The WO2 site was shared with Na2 (each having an occupancy of approximately 0.34 and 0.33, respectively), indicating a high degree of disorder similar to that found in pristine Na₂Co₂TeO₆ [14]. The interlayer distance increased substantially from 5.6075 Å in the anhydrate phase to 6.9485 Å after hydration, which enhanced the two-dimensional character of the magnetic layers.

A final round of MEM calculations using the converged structural parameters provided the electron density distribution depicted in Figure 5(c). The spatial extent and intensity of the electron density were consistent with the refined structure, confirming the reliability of the model. Bond valence sum [70] analysis

showed that the Co ions had an oxidation state of +2.043, which is consistent with a formal Co²⁺ state. Collectively, these findings confirm that water intercalation in Na₂Co₂TeO₆ increased the interlayer gap and potentially affected the magnetic interactions between the layers.

Magnetic properties

Figure 6 shows the temperature dependence of the magnetic susceptibility χ\chi and its inverse 1/χ1/\chi for a polycrystalline sample of Na₂Co₂TeO₆·yyH₂O under an applied field of μ0H=1\mu_{0}H = 1 T. A Curie–Weiss fit for 1/χ1/\chi between 150 and 250 K yielded an effective magnetic moment of μeff=5.268(7) μB\mu_{\mathrm{eff}} = 5.268(7)~\mu_{\mathrm{B}} and a positive Weiss temperature θW=8.9(2)\theta_{\mathrm{W}} = 8.9(2) K. This μeff\mu_{\mathrm{eff}} exceeded the spin-only contribution expected for Co²⁺ (3.87 μB\mu_{\mathrm{B}}), which suggests that unquenched orbital angular momentum contributed significantly to the magnetic moment. Large effective moments exceeding the spin-only value have been observed in other Co²⁺-based magnets, including the honeycomb-lattice compounds Na₂Co₂TeO₆ [16], Na₃Co₂SbO₆ [17], and Li₃Co₂SbO₆ [18], as well as in Na₂BaCo(PO₄)₂ [71]. Two distinct anomalies emerged in χ\chi and 1/χ1/\chi. The first anomaly at approximately 16 K was consistent with antiferromagnetic ordering, whereas the second anomaly at approximately 48 K was attributed to trace amounts of adsorbed oxygen.

Temperature dependence of the magnetic susceptibility and its inverse

Figure 6. Temperature dependence of the magnetic susceptibility χ\chi and its inverse 1/χ1/\chi for a polycrystalline sample of Na₂Co₂TeO₆·yyH₂O under an applied magnetic field of μ0H=1\mu_{0}H = 1 T. The black dashed line indicates the Curie–Weiss fit. The magnetic anomaly observed at approximately 16 K is indicated by the vertical arrow.

The behavior at approximately 16 K was clarified by measuring the temperature dependence of χ\chi under applied fields between 10 mT and 7 T, as shown in Figure 7(a)–Figure 7(c). At 10 mT and 0.1 T, the zero-field-cooled (ZFC) and field-cooled (FC) susceptibility curves diverged. An additional feature, indicated by the downward triangles in Figure 7(a), shows that χ\chi was enhanced, which persisted up to fields above 1 T (Figure 7(b)). In the χ\chi measurements, the antiferromagnetic-like behavior became more pronounced as the applied field increased to approximately 3 T. However, this feature broadened abruptly at approximately 6 T and appeared to vanish at approximately 7 T. We attributed this evolution to a field-induced spin-flop transition that generated a spontaneous canted moment, thereby masking the usual downturn of the antiferromagnetic susceptibility rather than eliminating the ordered state itself, which was corroborated by the specific-heat results presented below. Therefore, the anomaly at approximately 17 K marks the onset of antiferromagnetic order, whereas the high-field evolution of χ\chi reflects the emergence of a spin-flop

Temperature dependence of magnetic susceptibility under applied magnetic fields

Figure 7. (a) Temperature dependence of the magnetic susceptibility χ\chi of Na2Co2TeO6⋅yH2O\mathrm{Na}_2\mathrm{Co}_2\mathrm{TeO}_6\cdot y\mathrm{H}_2\mathrm{O} under applied magnetic fields of μ0H=10\mu_0H = 10 mT and 0.1 T, measured in the FC (filled circles) and ZFC (open circles) modes. The onset of the ferromagnetic-like increase in χ\chi is marked by a downward triangle. (b) Temperature dependence χ\chi under various magnetic fields measured in the FC mode.

phase carrying a weak-ferromagnetic component, not the suppression of antiferromagnetism.

The presence of a weak ferromagnetic moment is likely due to the Dzyaloshinskii–Moriya (DM) interaction [72, 73]. In a perfect honeycomb lattice with only the nearest-neighbor bonds, inversion symmetry at the bonds prevents the formation of a finite DM vector. However, second- or third-neighbor interactions can break the local inversion symmetry and allow the formation of a DM component, which may stabilize a noncollinear spin arrangement. Weak ferromagnetism has been reported in a variety of honeycomb-lattice magnets, including Co-based systems such as Na2Co2TeO6\mathrm{Na}_2\mathrm{Co}_2\mathrm{TeO}_6 [23] and Li3Co2SbO6\mathrm{Li}_3\mathrm{Co}_2\mathrm{SbO}_6 [18] and other 3d3d [74], 5d5d [75, 76], and 4f4f [77, 78, 79] honeycomb magnets. Moreover, theoretical research on Na2Co2TeO6\mathrm{Na}_2\mathrm{Co}_2\mathrm{TeO}_6 [24] has shown that a triple-QQ spin order, driven by competing Heisenberg, Kitaev, and off-diagonal interactions, can produce in-plane ferrimagnetism and thus a weak ferromagnetic moment. A similar mechanism involving multiple competing interactions may underlie the weak ferromagnetism in Na2Co2TeO6⋅yH2O\mathrm{Na}_2\mathrm{Co}_2\mathrm{TeO}_6\cdot y\mathrm{H}_2\mathrm{O}.

Figure 8(a) and Figure 8(b) show the isothermal magnetization curves and their derivatives at selected temperatures. A small hysteresis loop was observed at approximately 0 T, which corroborates the existence of a weak ferromagnetic component. The remanent magnetization was approximately 0.07 μB\mu_\mathrm{B}, corresponding to approximately 4% of the expected 2 μB\mu_\mathrm{B} saturation magnetization for a Jeff=1/2J_\mathrm{eff}=1/2 state with g≈4g \approx4 [80, 81]. This fraction is considerably larger than the weak ferromagnetic moments previously reported for Na2_2Co2_2TeO6_6 [25] and Li3_3Co2_2SbO6_6 [18]. Assuming the entire sample adopts a canted antiferromagnetic order, the spin canting angle will be approximately 2°.

Isothermal magnetization curves and derivatives

Figure 8. (a) Isothermal magnetization curve for Na2Co2TeO6⋅yH2O\mathrm{Na}_2\mathrm{Co}_2\mathrm{TeO}_6\cdot y\mathrm{H}_2\mathrm{O} measured at various temperatures. (b) The dM/dHdM/dH data are presented as a function of the magnetic field, and the observed peak is indicated by a vertical arrow.

In addition to the small hysteresis, the magnetization curves at 2 K exhibited a jump at approximately μ0H=±5.7\mu_0H=\pm5.7 T, as shown for both MM and dM/dHdM/dH (Figure 8(b)). Guided by the specific-heat results presented below, we did not interpret this jump as a metamagnetic, forced-ferromagnetic collapse of the antiferromagnetic order; instead, we considered it to be the critical field of a spin-flop transition. Above 5.7 T, the magnetization increased sharply and approached the fully-polarized 2 μB\mu_\mathrm{B} per Co2+^{2+} Jeff=1/2J_\mathrm{eff}=1/2 moment with g≈4g \approx4 [80, 81]. However, the inevitable field-independent van Vleck contribution intrinsic to Co2+^{2+} ions implied that this seemingly polarized moment could not be regarded as

genuine saturation. The persistence of a sharp λ\lambda-type anomaly in C/TC/T up to 9 T (discussed in § 5. C) confirmed that the long-range antiferromagnetic order survived above 7 T, indicating that full saturation must occur under substantially higher fields. This is consistent with the canting of the Jeff=1/2J_\mathrm{eff}=1/2 moments in the spin-flop phase, rather than complete spin polarization. As the temperature increased, the transition field decreased and it was no longer observed at 30 K, which is consistent with a transition below TNT_\mathrm{N}. These observations show that a modest external field reoriented the antiferromagnet into a spin-flop state without affecting the long-range order. For dM/dHdM/dH at 14 and 30 K, small anomalies were observed at approximately ±2\pm2 T; however, no corresponding magnetic anomalies were observed in the temperature dependence of the magnetic susceptibility or heat capacity data, as discussed later. These features may be attributed to the alignment of magnetic domains or minor contributions arising from impurities.

Thermodynamic properties

Figure 9 shows the temperature dependence of the heat capacity divided by temperature C/TC/T for Na2_2Co2_2TeO6_6·yH2_2O. A sharp λ\lambda-type peak was observed at TNT_\mathrm{N}, signaling the onset of magnetic order. The lattice contribution was determined by fitting the 80–300 K range with a composite Debye–Einstein phonon model [82]. Subtracting this baseline yielded the magnetic term Cmag/TC_\mathrm{mag}/T (see Supplementary Information [68]). Integrating Cmag/TC_\mathrm{mag}/T recovers the magnetic entropy SmagS_\mathrm{mag} (Figure 9, bottom panel), which converges to 2Rln⁡22R\ln2. This is consistent with Jeff=1/2J_\mathrm{eff}=1/2 Kramers doublets and confirms the validity of the lattice subtraction.

Temperature dependence of heat capacity and magnetic entropy of Na2Co2TeO6·yH2O

Figure 9. (Top) Temperature dependence of the heat capacity of Na2_2Co2_2TeO6_6·yH2_2O plotted as C/TC/T. The pink dashed curve represents the phonon contribution extracted from the Debye–Einstein fit [82] for the data above 80 K. (Inset) C/TC/T measured under fields of 0–9 T. Each trace is vertically offset by 0.15 J mol−1^{-1} K−2^{-2} for clarity. Triangles indicate TNT_\mathrm{N}. (Bottom) Magnetic entropy SmagS_\mathrm{mag} under zero magnetic field, obtained by integrating Cmag/TC_\mathrm{mag}/T. The horizontal dashed line indicates Smag=2Rln⁡2S_\mathrm{mag}=2R\ln2, the full entropy expected for two Jeff=1/2J_\mathrm{eff}=1/2 moments per formula unit.

The inset in Figure 9 shows C/TC/T under various applied magnetic fields. The λ\lambda-peak broadened and its maximum shifted from 17.2 K at 0 T to 15.9 K at 9 T, which identified the anomaly as an antiferromagnetic transition with a finite field derivative. The persistence of the peak at 9 T, despite the broadening, indicates that the ordered state was not destroyed by the field. Together with the disappearance of the low-temperature downturn in χ\chi and the magnetization jump at approximately 5.7 T, this field evolution supports a spin-flop interpretation, rather than a metamagnetic collapse into a fully polarized state.

Discussion

The magnetization and heat capacity data show that Na2_2Co2_2TeO6_6·yH2_2O underwent an antiferromagnetic transition at TN≈17.2T_N \approx17.2 K under zero magnetic field, with a weak ferromagnetic moment generated by spin canting. The application of a magnetic field did not extinguish this order; instead, it triggered a spin-flop reorientation at μ0H≈5.7\mu_0H \approx5.7 T. Simultaneously, TNT_N was reduced slightly to 15.9 K at 9 T, demonstrating that the long-range order persisted throughout the observed field range. The delicate balance of interactions—and thus the magnetic ground state—was tuned by the intercalation of neutral water molecules between the layers.

We investigated the effects of water intercalation on the magnetic properties by first examining the structural changes induced by hydration. In Na2Co2TeO6⋅yH2O\mathrm{Na_2Co_2TeO_6}\mathbin{\cdot}y\mathrm{H_2O}, the cc-axis lattice parameter increased from 11.2149 to 13.8970 Å, corresponding to an increase in the interlayer spacing from 5.6075 to 6.9485 Å. This expansion is expected to enhance the two-dimensional magnetic behavior by reducing interlayer coupling. In addition, the aa-axis showed a non-negligible increase from 5.2889 to 5.3160 Å.

Such lattice distortions affect the CoO6\mathrm{CoO_6} octahedra, which we quantified using the O-Co-O bond-angle variance σ2\sigma^2 [83]. Hydration does not affect the bond valence sum of Co, i.e., its effective valence state; therefore, the changes in the CoO6\mathrm{CoO_6} octahedra can be attributed purely to crystal-field effects caused by the octahedral distortion. The parameter σ2\sigma^2 is defined as

σ2=∑i=1m(φi−φ0)2m−1,(1)\sigma^2 = \sum_{i=1}^{m} \frac{(\varphi_i-\varphi_0)^2}{m-1}, \tag*{(1)}

where m=12m=12 for an octahedron and φ0\varphi_0 is the ideal octahedral angle of 90°. In the pristine compound (σ2=60.4403 deg2\sigma^2=60.4403\ \mathrm{deg}^2 [26]), the CoO6\mathrm{CoO_6} octahedra deviate moderately from perfect octahedral geometry. Upon hydration, Na2Co2TeO6⋅yH2O\mathrm{Na_2Co_2TeO_6}\mathbin{\cdot}y\mathrm{H_2O} shows a significantly larger σ2\sigma^2 of 94.1944 deg294.1944\ \mathrm{deg}^2, indicating stronger trigonal distortion. Such enhanced trigonal distortion typically promotes antiferromagnetic correlations among Co2+\mathrm{Co^{2+}} spins, consistent with the transition at TN≈15.4T_N \approx15.4 K.

As shown in Figure 10, σ2\sigma^2 was compared to the magnetic transition temperature TNT_N for various Co-based honeycomb compounds [18, 23, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39]. This showed a broad trend where TNT_N increased as σ2\sigma^2 increased. However, despite having a relatively large σ2\sigma^2, Na2Co2TeO6⋅yH2O\mathrm{Na_2Co_2TeO_6}\mathbin{\cdot}y\mathrm{H_2O} ordered at ∼15.4\sim15.4 K, which indicates that factors beyond octahedral distortion govern its magnetism.

Relationship between bond-angle variance and magnetic transition temperature

Figure 10. Relationship between the bond-angle variance σ2\sigma^2 of the CoO6\mathrm{CoO_6} octahedra and magnetic transition temperature TNT_N in various Co honeycomb-layered compounds. Na2Co2TeO6\mathrm{Na_2Co_2TeO_6}, Na2Co2TeO6⋅yH2O\mathrm{Na_2Co_2TeO_6}\mathbin{\cdot}y\mathrm{H_2O}, and the other Co honeycomb-layered materials are denoted by a red circle, a red star, and black circles, respectively. The background gradient emphasizes the observed trend that TNT_N increases as σ2\sigma^2 increases.

One key parameter is the nearest-neighbor Co–Co distance, which can change the balance between direct orbital overlap (favoring Heisenberg exchange) and more anisotropic interactions such as Kitaev or off-diagonal terms. For example, in BaCo2(AsO4)2\mathrm{BaCo_2(AsO_4)_2} and BaCo2(PO4)2\mathrm{BaCo_2(PO_4)_2}, the absence of a central cation in the honeycomb planes leads to extremely short Co–Co distances, small σ2\sigma^2 values (9.1717 and 21.2611 deg2\mathrm{deg}^2, respectively), and low transition temperatures (TN≈5.4T_N \approx5.4 and 6 K, respectively) [27, 28, 29, 30, 31]. Neutron-scattering and first-principles calculations suggest that an XXZ model describes these materials better than a Kitaev–Heisenberg framework [32, 39, 40].

By contrast, hydration enlarges the abab-plane of Na2Co2TeO6\mathrm{Na_2Co_2TeO_6}, which increases the nearest-neighbor Co–Co distance from 3.0536 to 3.0692 Å. This likely reduces direct t2gt_{2g}–t2gt_{2g} overlap and weakens the conventional Heisenberg coupling, thereby increasing the importance of frustrated or anisotropic interactions. Consequently, even with pronounced trigonal distortion, the magnetic transition temperature remained relatively modest at 15.4 K. However, the ∼0.5%\sim0.5\% increase in the Co–Co distance that accompanied hydration was too small to account for the ∼36%\sim36\% drop in TNT_N. The more conspicuous structural change was the swelling of the interlayer gallery. The insertion of H2O\mathrm{H_2O} lengthened the cc-axis from ∼5.61\sim5.61 to ∼6.95\sim6.95 Å. As shown in Figure 10, Na2Co2TeO6⋅yH2O\mathrm{Na_2Co_2TeO_6}\mathbin{\cdot}y\mathrm{H_2O} and K2Co2TeO6\mathrm{K_2Co_2TeO_6} [35] fell below the σTN2\sigma^2_{T_N} trend. These outliers were unified by their considerably expanded cc axes. This indicates that weakened interlayer exchange has an important role in depressing TNT_N. However, even this geometric decoupling cannot be the sole controlling factor, because K2Co2TeO6\mathrm{K}_2\mathrm{Co}_2\mathrm{TeO}_6—whose interlayer spacing (~6.31 Å) lies between those of anhydrous and hydrated Na2Co2TeO6\mathrm{Na}_2\mathrm{Co}_2\mathrm{TeO}_6—showed the lowest ordering temperature among the samples (~4 K) despite its shorter Co–Co bond. Therefore, the comparison highlights the importance of the cc-axis and indicates that the ordering scale is governed by the collective action of several parameters: subtle changes in the Co–Co distance, variations in the trigonal distortion of the CoO6\mathrm{CoO}_6 octahedra that tune single-ion anisotropy, and the strength and coherence of interlayer coupling, which can be weakened geometrically (through layer expansion) or chemically (through alkali-ion disorder). Hydration perturbs all three parameters simultaneously, amplifying the frustration and suppressing the long-range order far more than any one adjustment in isolation. Targeted experiments that isolate individual parameters are therefore essential to determine their relative importance.

Three complementary approaches can be used to investigate the interplay between structure and magnetism in Na2Co2TeO6⋅yH2O\mathrm{Na}_2\mathrm{Co}_2\mathrm{TeO}_6 \cdot y\mathrm{H}_2\mathrm{O} and the broader A2Co2TeO6\mathrm{A}_2\mathrm{Co}_2\mathrm{TeO}_6 family. First, systematic chemical or hydration tuning can be used to vary the trigonal distortion, in-plane Co–Co spacing, and interlayer separation almost independently, revealing which geometric lever most effectively stabilizes or suppresses the long-range order. Second, advanced spectroscopic techniques such as single-crystal neutron diffraction and resonant inelastic X-ray scattering can be used to track how the exchange pathways respond to determine whether anisotropic interactions or more conventional Heisenberg terms dominate in each structural regime. Third, high pressure and controlled dehydration can provide reversible control over the abab-plane and cc-axis lattice parameters, enabling one-to-one correlations between the structural changes and emergent magnetic behavior.

Recent studies on thin films of the cobalt-based Kitaev candidate Cu3Co2SbO6\mathrm{Cu}_3\mathrm{Co}_2\mathrm{SbO}_6 have demonstrated precise control of octahedral distortions and magnetic ordering through epitaxial strain and post-growth annealing [84, 85]. However, the film geometry precludes bulk-sensitive probes such as superconducting quantum interference device (SQUID) magnetometry, heat-capacity measurements, and neutron scattering. By contrast, our water-intercalated Na2Co2TeO6⋅yH2O\mathrm{Na}_2\mathrm{Co}_2\mathrm{TeO}_6 \cdot y\mathrm{H}_2\mathrm{O} method produces gram-scale, phase-pure powders whose interlayer spacing can be tuned stepwise, which are fully compatible with bulk analysis techniques. Therefore, all three experimental strategies can be applied in combination to determine quantitative links between the structural tuning and magnetic ground states. This positions hydration chemistry as a bulk analog to epitaxial strain, which promises to elucidate the delicate balance of interactions that control TNT_N in honeycomb cobaltates, and to inform the design of two-dimensional magnets capable of hosting exotic spin-liquids or topologically non-trivial phases.

Summary

This study demonstrated that intercalating water into the layered Kitaev candidate Na2Co2TeO6\mathrm{Na}_2\mathrm{Co}_2\mathrm{TeO}_6 yields a cobalt tellurate hydrate, Na2Co2TeO6⋅yH2O\mathrm{Na}_2\mathrm{Co}_2\mathrm{TeO}_6 \cdot y\mathrm{H}_2\mathrm{O}, with significant changes in the structural and magnetic properties. Hydration increases the interlayer spacing along the cc-axis, modifies the octahedral geometry, and preserves the valence state of cobalt. The XRD, thermal analysis, and infrared spectroscopy revealed that water molecules occupy multiple interlayer sites with partial occupancies, introducing local disorder and expanding the cc-axis (dominantly) and aa-axis. Consequently, the antiferromagnetic transition temperature decreases from ~27 to ~17.2 K, which highlights how the delicate interplay of magnetic interactions depends sensitively on the crystal lattice. Under an applied magnetic field, the transition only shifts to 15.9 K at 9 T and a spin-flop occurs at approximately 5.7 T, which indicates that the long-range order is preserved when the spin orientation is reconfigured. Furthermore, the bond-angle variance increases significantly after water intercalation, indicating enhanced trigonal distortion of the CoO6\mathrm{CoO}_6 octahedra, which typically stabilizes the antiferromagnetic order. However, the modest transition temperature suggests that additional frustration arises from the enlarged in-plane Co–Co distance and weakened direct orbital overlap. Overall, these findings indicate that water intercalation is a powerful strategy to systematically tune lattice parameters and low-temperature magnetic ground states in honeycomb cobaltates without affecting the electronic configuration of cobalt.

Acknowledgement

This work was supported by JST PRESTO “Creation of Future Materials by Expanding Materials Exploration Space” [Grant Number JPMJPR23Q8], JSPS KAKENHI Transformative Research Areas (A) "Suprac-ceramics" [Grant Numbers JP23H04616, JP22H05142, JP22H05143], JSPS KAKENHI Transformative Research Areas (A) "1000-Tesla Chemical Catastrophe" [Grant Number JP24H01613], JSPS KAKENHI Young Scientific Research [Grant Number JP22K14002], and JSPS KAKENHI Scientific Research (C) [Grant Number JP24K06953]. Part of this work was conducted as joint research at the Institute for Solid State Physics, the University of Tokyo [Project Numbers 202306-GNBXX-0128, 202311-GNBXX-0018, 202306-MCBXG-0094, and 202306-MCBXG-0070].

References

  1. [1]J. Alicea, New directions in the pursuit of Majorana fermions in solid state systems. Rep. Prog. Phys. 75, 076501 (2012).DOI
  2. [2]C. Beenakker, Search for Majorana Fermions in Superconductors. Annu. Rev. Condens. Matter Phys. 4, 113 (2013).
  3. [3]S. R. Elliott, and M. Franz, Majorana fermions in nuclear, particle, and solid-state physics. Rev. Mod. Phys. 87, 137 (2015).DOI
  4. [4]L. Balents, Spin liquids in frustrated magnets. Nature (London) 464, 199 (2010).
  5. [5]L. Savary and L. Balents, Quantum spin liquids: a review. Rep. Prog. Phys. 80, 016502 (2016).DOI
  6. [6]P. W. Anderson, Resonating valence bonds: A new kind of insulator?. Mater. Res. Bull. 8, 153 (1973).
  7. [7]T.-H. Han, J. S. Helton, S. Chu, D. G. Nocera, J. A. Rodriguez-Rivera, C. Broholm, and Y. S. Lee, Fractionalized excitations in the spin-liquid state of a kagome-lattice antiferromagnet. Nature (London) 492, 406 (2012).
  8. [8]A. Kitaev, Anyons in an exactly solved model and beyond. Ann. Phys. 321, 2 (2006).DOI
  9. [9]H. Takagi, T. Takayama, G. Jackeli, G. Khaliullin, and S. E. Nagler, Concept and realization of Kitaev quantum spin liquids. Nat. Rev. Phys. 1, 264 (2019).DOI
  10. [10]G. Jackeli, and G. Khaliullin, Mott Insulators in the Strong Spin-Orbit Coupling Limit: From Heisenberg to a Quantum Compass and Kitaev Models. Phys. Rev. Lett. 102, 017205 (2009).pubmed.ncbi.nlm.nih.gov/19257237
  11. [11]H. Liu, and G. Khaliullin, Pseudospin exchange interactions in d⁷ cobalt compounds: Possible realization of the Kitaev model. Phys. Rev. B 97, 014407 (2018).DOI
  12. [12]R. Sano, Y. Kato, and Y. Motome, Kitaev-Heisenberg Hamiltonian for high-spin d⁷ Mott insulators. Phys. Rev. B 97, 014408 (2018).DOI
  13. [13]S. M. Winter, Magnetic couplings in edge-sharing high-spin d⁷ compounds. J. Phys. Mater. 5, 045003 (2022).DOI
  14. [14]L. Viciu, Q. Huang, E. Morosan, H. W. Zandbergen, N. I. Greenbaum, T. McQueen, and R. J. Cava, Structure and basic magnetic properties of the honeycomb lattice compounds Na₂Co₂TeO₆ and Na₃Co₂SbO₆. J. Solid State Chem. 180, 1060 (2007).
  15. [15]J. H. Roudebush, and R. J. Cava, Structure and properties of NaₓM₂SbO₆·yH₂O, M = Co(III), Ni(III) honeycomb oxyhydrates. J. Solid State Chem. 204, 178 (2013).DOI
  16. [16]A. K. Bera, S. M. Yusuf, A. Kumar, and C. Ritter, Zigzag antiferromagnetic ground state with anisotropic correlation lengths in the quasi-two-dimensional honeycomb lattice compound Na₂Co₂TeO₆. Phys. Rev. B 95, 094424 (2017).DOI
  17. [17]C. Wong, M. Avdeev, and C. D. Ling, Zig-zag magnetic ordering in honeycomb-layered Na₃Co₂SbO₆. J. Solid State Chem. 243, 18 (2016).DOI
  18. [18]A. J. Brown, Q. Xia, M. Avdeev, B. J. Kennedy, and C. D. Ling, Synthesis-Controlled Polymorphism and Magnetic and Electrochemical Properties of Li₃Co₂SbO₆. Inorg. Chem. 58, 13881 (2019).DOI
  19. [19]C. Kim, J. Jeong, G. Lin, P. Park, T. Masuda, S. Asai, S. Itoh, H. S. Kim, H. Zhou, and J. Ma, Antiferromagnetic Kitaev interaction in Jₑff = 1/2 cobalt honeycomb materials Na₃Co₂SbO₆ and Na₂Co₂TeO₆. J. Phys. Condens. Matter 34, 045802 (2022).
  20. [20]M. Songvilay, J. Robert, S. Petit, J. A. Rodriguez-Rivera, W. D. Ratcliff, F. Damay, V. Balédent, M. Jiménez-Ruiz, P. Lejay, E. Pachoud, A. Hadj-Azzem, V. Simonet, and C. Stock, Kitaev interactions in the Co honeycomb antiferromagnets Na₃Co₂SbO₆ and Na₂Co₂TeO₆. Phys. Rev. B 102, 224429 (2020).DOI
  21. [21]E. Vavilova, T. Vasilchikova, A. Vasiliev, D. Mikhailova, V. Nalbandyan, E. Zvereva, and S. V. Streltsov, Magnetic phase diagram and possible Kitaev-like behavior of the honeycomb-lattice antimonate Na₃Co₂SbO₆. Phys. Rev. B 107, 054411 (2023).DOI
  22. [22]A. L. Sanders, R. A. Mole, J. Liu, A. J. Brown, D. Yu, C. D. Ling, and S. Rachel, Dominant Kitaev interactions in the honeycomb materials Na₃Co₂SbO₆ and Na₂Co₂TeO₆. Phys. Rev. B 106, 014413 (2022).DOI
  23. [23]E. Lefrancois, M. Songvilay, J. Robert, G. Nataf, E. Jordan, L. Chaix, C. V. Colin, P. Lejay, A. Hadj-Azzem, R. Ballou, and V. Simonet, Magnetic properties of the honeycomb oxide Na₂Co₂TeO₆. Phys. Rev. B 94, 214416 (2016).DOI
  24. [24]N. Francini, and L. Janssen, Ferrimagnetism from triple-q order in Na₂Co₂TeO₆. Phys. Rev. B 110, 235118 (2024).DOI
  25. [25]W. Yao, and Y. Li, Ferrimagnetism and anisotropic phase tunability by magnetic fields in Na₂Co₂TeO₆. Phys. Rev. B 101, 085120 (2020).DOI
  26. [26]G. Xiao, Z. Xia, W. Zhang, X. Yue, S. Huang, X. Zhang, F. Yang, Y. Song, M. Wei, H. Deng, and D. Jiang, Crystal Growth and the Magnetic Properties of Na₂Co₂TeO₆ with Quasi-Two-Dimensional Honeycomb Lattice. Cryst. Growth Des. 19, 2658 (2019).DOI
  27. [27]Y. Motome, R. Sano, S. Jang, Y. Sugita, and Y. Kato, Materials design of Kitaev spin liquids beyond the Jackeli–Khaliullin mechanism. J. Phys. Condens. Matter 32, 404001 (2020).DOI
  28. [28]T. Dordevic, BaCo₂(AsO₄)₂. Acta Crystallogr. Sec. E 64, i58 (2008).
  29. [29]L. P. Regnault, P. Burlet, and J.Rossat-Mignod, Magnetic ordering in a planar XY model: BaCo₂(AsO₄)₂. Physica B+C 86, 660 (1977).DOI
  30. [30]L. Regnault, and J.Rossat-Mignod, J. Magn. Magn. Mater. Effect of a magnetic field on the magnetic ordering of BaCo₂(AsO₄)₂. 14, 194 (1979).DOI
  31. [31]Z. Birksack, and W. T. A. Harrison, Barium Cobalt Phosphate, BaCo₂(PO₄)₂. Acta. Crystallogr. C 54, 1554 (1998).
  32. [32]H. S. Nair, J. M. Brown, E. Coldren, G. Hester, M. P. Gelfand, A. Podlesnyak, Q. Huang, and K. A. Ross, Short-range order in the quantum XXZ honeycomb lattice material BaCo₂(PO₄)₂. Phys. Rev. B 97, 134409 (2018).
  33. [33]M. I. Stratan, I. L. Shukaev, T. M. Vasilchikova, A. N. Vasiliev, A. N. Korshunov, A. I. Kurbakov, V. B. Nalbandyan, and E. A. Zvereva, Synthesis, structure and magnetic properties of honeycomb-layered Li₃Co₂SbO₆ with new data on its sodium precursor, Na₃Co₂SbO₆. New J. Chem. 43, 13545 (2019).DOI
  34. [34]J. Q. Yan, S. Okamoto, Y. Wu, Q. Zheng, H. D. Zhou, H. B. Cao, and M. A. McGuire, Magnetic order in single crystals of Na₃Co₂SbO₆ with a honeycomb arrangement of 3d⁷ Co²⁺ ions. Phys. Rev. Mater. 3, 074405 (2019).DOI
  35. [35]X. Xu, L. Wu, Y. Zhu, and R. J. Cava, K₂Co₂TeO₆: A layered magnet with S = 1/2 Co²⁺ honeycomb lattice. Phys. Rev. B 108, 174432 (2023).
  36. [36]R. E. Newnham, J. H. Fang, and R. P. Santoro, Crystal structure and magnetic properties of CoTiO₃. Acta Crystallogr. 17, 240 (1964).DOI
  37. [37]B. Yuan, I. Khait, G.-J. Shu, F. C. Chou, M. B. Stone, J. P. Clancy, A. Paramekanti, and Y.-J. Kim, Dirac Magnons in a Honeycomb Lattice Quantum XY Magnet CoTiO₃. Phys. Rev. X 10, 011062 (2020).DOI
  38. [38]Y. Haraguchi, Y. Yoshida, A. Matsuo, K. kindo, and H. Aruga Katori, CaCo₂TeO₆: A topochemically prepared 3d⁷ honeycomb Kitaev magnet. Phys. Rev. B 110, 184411 (2024).
  39. [39]T. Halloran, F. Desrochers, E. Z. Zhang, T. Chen, L. E. Chern, Z. Xu, B. Winn, M. Graves-Brook, M. B. Stone, A. I. Kolesnikov, Y. Qiu, R. Zhong, R. Cava, Y. B. Kim, and C. Broholm, Geometrical Frustration versus Kitaev interactions in BaCo₂(AsO₄)₂. Proc. Natl. Acad. Sci. USA 120, e2215509119 (2023).DOI
  40. [40]S. Das, S. Voleti, T. Saha-Dasgupta, A. Paramekanti, XY magnetism, Kitaev exchange, and long-range frustration in the Jeff = 1/2 honeycomb cobaltates. Phys. Rev. B 104, 134425 (2021).DOI
  41. [41]L.-P. Regnault, C. Boullier, and J. E. Lorenzo, Polarized-neutron investigation of magnetic ordering and spin dynamics in BaCo₂(AsO₄)₂ frustrated honeycomb-lattice magnet. Heliyon 4, e00507 (2018).DOI
  42. [42]R. Zhong, T. Gao, N. P. Ong, and R. J. Cava, Weak-field induced nonmagnetic state in a Co-based honeycomb. Sci. Adv. 6, eaay6953 (2020).
  43. [43]X. Zhang, Y. Xu, T. Halloran, R. Zhong, C. Broholm, R. J. Cava, N. Drichko, and N. P. Armitage, A magnetic continuum in the cobalt-based honeycomb magnet BaCo₂(AsO₄)₂. Nat. Mater. 22, 58 (2023).DOI
  44. [44]M. Elliot, P. A. McClarty, D. Prabhakaran, R. D. Johnson, H. C. Walker, P. Manuel, and R. Coldea, Order-by-disorder from bond-dependent exchange and intensity signature of nodal quasiparticles in a honeycomb cobaltate. Nat. Commun. 12, 3936 (2021).
  45. [45]X. Li, Y. Gu, Y. Chen, V. O. Garlea, K. Iida, K. Kamazawa, Y. Li, G. Deng, Q. Xiao, X. Zheng, Z. Ye, Y. Peng, I. A. Zaliznyak, J. M. Tranquada, and Y. Li, Giant Magnetic In-Plane Anisotropy and Competing Instabilities in Na₃Co₂SbO₆. Phys. Rev. X 12, 041024 (2022).DOI
  46. [46]X. Liu and H.-Y. Kee, Non-Kitaev versus Kitaev honeycomb cobaltates. Phys. Rev. B 107, 054420 (2023).DOI
  47. [47]K. Maeda, T. Motohashi, R. Ohtani, K. Sugimoto, Y. Tsuji, A. Kuwabara, and S. Horike, Supra-ceramics: a molecule-driven frontier of inorganic materials. Sci. Technol. Adv. Mater. 25, 1 (2024).
  48. [48]P. Miao, X. Jin, W. Yao, Y. Chen, A. Koda, Z. Tan, W. Xie, W. Ji, T. Kamiyama, and Y. Li, Persistent spin dynamics in magnetically ordered honeycomb-lattice cobalt oxides, Phys. Rev. B 109, 134431 (2024).DOI
  49. [49]R. Oishi, M. Yonemura, Y. Nishimaki, S. Torii, A. Hoshikawa, T. Ishigaki, T. Morishima, K. Mori, and T. Kamiyama, Rietveld analysis software for J-PARC. Nucl. Instrum. Methods Phys. Res., Sect. A 600, 94 (2009).DOI
  50. [50]E. M. Seibel, J. H. Roudebush, M. N. Ali, and R. J. Cava, Structure and Magnetic Properties of the Spin-1/2-Base Honeycomb Na2BiO6-δ·1.7H2O. Inorg. Chem. 53, 10989 (2014).DOI
  51. [51]K. Takada, H. Sakurai, E. Takayama-Muromachi, F. Izumi, R. A. Dilanian, and T. Sasaki, Superconductivity in two-dimensional CoO2 layers. Nature (London) 422, 53 (2003).
  52. [52]K. Takada, H. Sakurai, E. Takayama-Muromachi, F. Izumi, R. A. Dilanian, and T. Sasaki, Structural difference between a superconducting sodium cobalt oxide and its related phase. J. Solid State Chem. 177, 372 (2004).DOI
  53. [53]S. Park, W.-S. Yoon, and T. Vogt, Structure and magnetism of the mono-layer hydrate Na0.3NiO2· 0.7 H2O. Solid State Commun. 142, 75 (2007).arxiv.org/abs/cond-mat/0701498
  54. [54]M. Shikanai, C. Delmas, and J. Darriet, NaRuO2 and NaₓRuO2·yH2O: New Oxide and Oxyhydrate with Two Dimensional RuO2 Layers. Inorg. Chem. 43, 1214 (2004).
  55. [55]S. Park, K. Kang, W. Si, W.-S. Yoon, Y. Lee, A.R. Moodenbaugh, L.H. Lewis, and T. Vogt, Synthesis and characterization of Na0.3RhO2·0.6H2O—a semiconductor with a weak ferromagnetic component. Solid State Commun. 135, 51 (2007).
  56. [56]R. Schöllhorn, and A. Weiss, Layer Intercalation Compounds of the Complex Carbide Ta2S2C. Z. Naturforsch. B 28, 716 (1973).
  57. [57]R. Schöllhorn, and A. Weiss, Cation exchange reactions and layer solvate complexes of ternary phases MₓMoS2. J. Less Common Met. 36, 229 (1974).DOI
  58. [58]R. Schöllhorn, E. Sick, and A. Lerf, Reversible topotactic redox reactions of layered dichalcogenides. Mater. Res. Bull. 10, 1005 (1975).DOI
  59. [59]R. Schöllhorn, and A. Lerf, Reversible intracrystalline Redox Reactions of Layered Chalcogenides. Z. Naturforsch. B 29, 804 (1974).
  60. [60]R. Schöllhorn, Abstracts of the 8th International Symposium on the Reactivity of Solids, Goteborg, 1976, No. 524.
  61. [61]R. Schöllhorn, and W. Schmucker, Reversible solid-state redox reactions of layered carbide Ta2S2C Z. Naturforsch. B 30, 975 (1975).DOI
  62. [62]R. Schöllhorn, and H. Meyer, Cathodic reduction of layered transition metal chalcogenides. Mater. Res. Bull. 9, 1237 (1974).DOI
  63. [63]J. O. Besenhard, H. Meyer, and R. Schöllhorn, Defined Intercalation Stages from Cathodic Reduction of MoS2 in Organic Electrolytes. Z. Naturforsch. B 31, 907 (1976).DOI
  64. [64]J. O. Besenhard and R. Schöllhorn, Discharge reaction mechanism of the MoO3 electrode in organic electrolytes. J. Power Sources 1, 267 (1977).DOI
  65. [65]A. Lerf, and R. Schöllhorn, Solvation reactions of layered ternary sulfides AxTiS2, AxNbS2, and AxTaS2. Inorg. Chem. 16, 2950 (1977).DOI
  66. [66]J. J. Fox, and A. E. Martin, Investigations of infrared spectra (2.5—7.5μ). Absorption of water. Proc. Roy. Sot. A 174, 234 (1940).
  67. [67]E. Wolska, and W. Szajda, Use of infrared spectroscopy to identify crystalline aluminum hydroxides of the Al(OH)3-Fe(OH)3 system. J. Appl. Spectrosc. 38, 137 (1983).DOI
  68. [68]See Supplemental Material at [URL will be inserted by publisher] for the magnetic susceptibility of dehydrated and sample of Na2Co2TeO6 and lattice heat capacity analysis of Na2Co2TeO6·yH2O.
  69. [69]K. Momma and F. Izumi, VESTA 3 for three-dimensional visualization of crystal, volumetric and morphology data. J. Appl. Crystallogr. 44, 1272 (2011).DOI
  70. [70]I. D. Brown, The Chemical Bond in Inorganic Chemistry-The Bond-Valence Model (Oxford University Press, New York, 2002).DOI
  71. [71]N. Li, Q. Huang, X. Y. Yue, W. J. Chu, Q. Chen, E. S. Choi, X. Zhao, H. D. Zhou, and X. F. Sun, Possible itinerant excitations and quantum spin state transitions in the effective spin-1/2 triangular-lattice antiferromagnet Na2BaCo(PO4)2. Nat. Commun. 11, 4216 (2020).DOI
  72. [72]I. Dzyaloshinsky, A thermodynamic theory of “weak” ferromagnetism of antiferromagnetics. J. Phys. Chem. Sol. 4, 241 (1958).DOI
  73. [73]T. Moriya, Anisotropic Superexchange Interaction and Weak Ferromagnetism. Phys. Rev. 120, 91 (1960).DOI
  74. [74]Y. Haraguchi, K. Nawa, C. Michioka, H. Ueda, A. Matsuo, K. Kindo, M. Avdeev, T. J. Sato and K. Yoshimura, Frustrated magnetism in the J1-J2 honeycomb lattice compounds MgMnO3 and ZnMnO3 synthesized via a metathesis reaction. phys. Rev. Mater. 3, 124406 (2019).
  75. [75]Y. Haraguchi, and H. Aruga Katori, Strong antiferromagnetic interaction owing to a large trigonal distortion in the spin-orbit-coupled honeycomb lattice iridate CdIrO3. phys. Rev. Mater. 4, 044401 (2020).
  76. [76]Y. Haraguchi, C. Michioka, A. Matsuo, K. Kindo, H. Ueda, and K. Yoshimura, Magnetic ordering with an XY-like anisotropy in the honeycomb lattice iridates ZnIrO3 and MgIrO3 synthesized via a metathesis reaction. phys. Rev. Mater. 2, 054411 (2018).DOI
  77. [77]M. J. Daum, A. Ramanathan, A. I. Kolesnikov, S. Calder, M. Mourigal, and H. S. La Pierre, Collective excitations in the tetravalent lanthanide honeycomb antiferromagnet Na2PrO3. Phys. Rev. B 103, 121109 (2021).DOI
  78. [78]R. Okuma, K. MacFarquharson, and R. Coldea, Selective synthesis and crystal chemistry of candidate rare-earth Kitaev materials: Honeycomb and hyperhoneycomb Na₂PrO₃, Inorg. Chem. 63, 15941–15950 (2024).
  79. [79]R. Okuma, K. MacFarquharson, R. D. Johnson, D. Voneshen, P. Manuel, and R. Coldea, Compass-model physics on the hyperhoneycomb lattice in the extreme spin-orbit regime, Nat. Commun. 15, 10615 (2024).arxiv.org/abs/2410.09167
  80. [80]Y. Haraguchi, T. Ohno, A. Matsuo, K. Kindo and H. Aruga Katori, Perfect kagome-lattice antiferromagnets with Jeff = 1/2: The Co²⁺ analogs of the copper minerals volborthite and vesignieite. Phys. Rev. B 106, 214421 (2022).
  81. [81]M. E. Lines, Magnetic properties of CoCl₂ and NiCl₂, Phys. Rev. 131, 546 (1963).
  82. [82]P. Svoboda, P. Javorský, M. Diviš, V. Sechovský, F. Honda, G. Oomi, and A. A. Menovsky, Importance of anharmonic terms in the analysis of the specific heat of UNiSi₂. Phys. Rev. B 63, 212408 (2001).DOI
  83. [83]K. Robinson, G. V. Gibbs, and P. H. Ribbe, Quadratic Elongation: A Quantitative Measure of Distortion in Coordination Polyhedra. Science 172, 567 (1971).pubmed.ncbi.nlm.nih.gov/17802221
  84. [84]G.-H. Kim, M. Park, U. Choi, B. Kang, U. Seo, G. Ji, S. Noh, D.-Y. Cho, J.-W. Yoo, J. M. Ok, and C. Sohn, Suppression of antiferromagnetic order by strain-enhanced frustration in honeycomb cobaltate, Sci. Adv. 10, eadn8694 (2024).DOI
  85. [85]B. Kang, U. Choi, T. S. Jung, S. Noh, G.-H. Kim, U. Seo, M. Park, J.-H. Choi, M. J. Kim, G. Ji, S. Song, H. Jo, S. Hong, N. X. Duong, S. Samanta, H.-S. Kim, T. H. Kim, Y. Yang, S. Park, J. M. Ok, J.-W. Yoo, J. H. Kim, and C. Sohn, Optical detection of bond-dependent and frustrated spin in the two-dimensional cobalt-based honeycomb antiferromagnet Cu₃Co₂SbO₆, Nat. Commun. 16, 1323 (2025).DOI

Paper details

vlnc:W_g6rwy3ar
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents